Home

Kodak EasyShare Thermal Photo Printer

1. oooooWoWoWoWoWooooWoWoWo 42 SRECE E E E E 50 HEE WN na An Ga 50 Telephone customer support os nonsaneun ne maan anemia nahan 51 BO APP end nara em anon Ana 52 Printer dock plus specifications ost samaan mahar 52 Additional safety and maintenance tips ooooooWoooo 53 Upgrading your software and firmwate oooWoooo 53 Regulatory INA ON Lele int ntm naas motem Maan ena 54 iv CEN www kodak com go support Getting started Package contents 1 Printer dock 5 AC power adapter 2 Paper tray 6 AC power cord 3 Kodak color cartridge amp photo paper kit PH 10 7 Universal camera insert 10 pack pre installed 4 Kodak EasyShare Ni MH rechargeable battery pack Not shown Welcome Kit consisting of User s Guide may be provided on CD Start Here guide Kodak EasyShare software CD Contents may change without notice Your camera may use a different battery type see page 7 Purchase additional accessories for the Kodak EasyShare printer dock plus at a retailer of Kodak products or visit www kodak com go accessories www kodak com go support CEN 1 Getting started Finding a location for your printer dock plus m Place the printer dock on a flat clean dust free surface in a dry location and out of direct sunlight mw Allow at least 5 in 12 7 cm clearance from the back of the printer dock for paper travel 5 in 127 em For proper ventilation make sure the top and
2. E 2up m 4up Recommended picture size E 2 up m 4up m Yup setting on printer dock jm 4up E 9up www kodak com go support CEN 17 Printing without a computer Effect of picture size on number of copies When setting up a print job see page 12 if you do not specify the number of copies to print the printer dock maximizes the use of white space on the paper by filling it with multiple copies of the current or most recent picture For example if you set the picture size to 4 up then do nothing more than press the Print button FA four 2 x 3 in 51 x 76 mm pictures are printed on one sheet of paper On the other hand if 4 up picture size is selected and you choose 3 copies to print when you press the Print button three and only three copies are printed on one sheet of paper NOTE The Picture Size button is not enabled when printing from a computer Enhancing your pictures Use Auto Enhance to automatically enhance over or underexposed pictures To apply Auto Enhance to a print job m When setting up a print job press the Auto Enhance button before pressing the Print button The Auto Enhance light glows steady then blinks during printing To change the default so Auto Enhance is always on m Press and hold the Auto Enhance button Pkl for 5 seconds The Auto Enhance light blinks then glows steady Repeat the above step to return the Auto Enhance default setting to off NOTE The Auto Enhance button is not enabl
3. VCCI OBE CBOCVTFABIRMRMRE CT CORE RERS CEHJ DTE ZHE LTORTH CORBPAIYAPTVLEYV ay FECL T ASNA E SizESaesseL3cepo E3 AUER SAAS Ic ko TIEELURMWYRUALT RS English translation This is a Class B product based on the standard of the Voluntary Control Council for Interference from Information Technology Equipment VCCI If this is used near a radio or television receiver in a domestic environment it may cause radio interference Install and use the equipment according to the instruction manual www kodak com go support CEN 55 Index Numerics A way control i 12 13 14 20 A AC power adapter amp cord 1 connecting 3 accessories amp supplies ordering 50 accessory door i 13 14 15 20 27 28 29 audio video A V out connector i 20 auto enhance button light i 18 47 improving picture quality with 18 B battery charging 9 10 charging lights i 9 10 44 extending life 8 10 loading 7 refreshing Ni MH battery pack 10 safety and handling 8 types button A way control i 12 13 14 20 auto enhance i 18 cancel i 12 13 14 15 18 21 26 27 28 29 picture size 17 print 12 13 14 15 20 refresh i 10 slide show 21 transfer i 26 27 28 29 C cable AC power adapter amp cord 1 3 audio video A V 20 USB 14 15 25 28 29 camera battery See battery connector ii docking and charging 9 insert for dock ii 1 2 locator pin ii 9 preparing for print
4. Wireless printing Printing with the optional remote control The Kodak remote control sold separately lets you view and print pictures remotely The remote control is especially helpful when using your television as a display see page 20 See the remote control user s guide for details Printing from an infrared device You can print from devices that use IrDA wireless technology including many PDAs and wireless mobile telephones Use your infrared device to review pictures choose printing options and print See your device user s guide for details NOTE When using the remote control or a wireless intrared device with your printer dock plus make sure the IR sensor on the printer dock is not obstructed IR sensor Ns For more information visit the Infrared Data Association Web site at www irda org Purchase a Kodak remote control and other accessories at a retailer of Kodak products or visit www kodak com go accessories Be sure to check back periodically for new wireless printing accessories 16 N www kodak com go support Printing without a computer Changing the printed picture size 1 Refer to the appropriate section in this chapter to set up printing options on the device you wish to print from 2 Before printing while making selections or changing settings press the Picture Size button repeatedly to scroll through and select a picture size Ll 1 up one 4x6 in 102 x 152 mm picture per sheet defaul
5. Your printer dock is intended to charge only the Kodak EasyShare Ni MH rechargeable battery pack included and the Kodak EasyShare Li lon rechargeable battery included with some cameras Other manufacturers batteries are not supported Damage caused by unauthorized accessories is not covered under warranty If your camera came with If your camera came with a non rechargeable batteries rechargeable Li lon battery nae install it in your camera ais Do not use the Ni MH use the Ni MH rechargeable battery pack that rechargeable came with the printer dock battery pack D that came with the printer dock NOTE The Ni MH rechargeable battery pack and Li lon rechargeable battery are not charged when you receive them Make sure to completely charge them before using them with your camera see page 9 www kodak com go support CEN 7 Setting up your EasyShare digital camera Important battery information Battery safety and handling Do not allow batteries to touch metal objects including coins Otherwise batteries may short circuit discharge energy become hot or leak Dispose of batteries according to local and national regulations Extending battery life Limit the following activities that quickly deplete battery power Reviewing your pictures on the camera screen Using the camera screen as a viewfinder Excessive use of the flash Dirt on the battery contacts can affect battery life Wipe the
6. back of the printer dock are not blocked m When connecting power or USB cables keep the cables clear of the paper path to the front and rear of the printer dock m Avoid areas where ventilation ducts open doors or frequent passersby might expose the printer dock and paper to high levels of dust and debris Airborne dirt particles can affect picture quality m Allow enough space on all sides of the printer dock to let you connect and disconnect cables change the color cartridge and add paper Installing the custom camera insert The Kodak EasyShare printer dock plus comes with a universal camera insert already installed The insert allows most Kodak EasyShare CX DX6000 7000 series and LS600 series digital cameras to fit on the printer dock For best fit use the custom camera insert that came with your camera and keep the universal camera insert as a spare NOTE For some cameras including LS700 series you must use the custom camera insert to dock the camera otherwise the camera will not fit on the printer dock 1 Remove the universal camera insert a Push the insert toward the back of the printer dock and lift up the front edge b Lift up the back edge of the insert and remove 2 CEN www kodak com go support Getting started 2 Install the custom camera insert included with Fook your camera ae a Place the rear tabs of the insert in the slots A toward the back of the printer dock EN AS b Press the fr
7. www kodak com go support CEN 45 Troubleshooting Transfer button light Light status Action solution ight glows steady The printer dock is ready for None required green transferring pictures Light blinks green Pictures are being None required transferred to the After transferring pictures the computer transfer light continues to blink green until either the Transter button is pressed again or the connection has timed out The printer dock is printing The Transfer button is disabled in standalone mode The computer is off Turn on the computer Light is off There are no pictures in the None required camera on the card or on To enable Transfer Hi Kom Ban 1 Connect printer dock to computer page 25 The camera is not docked a Take pictures compatible Kodak card reader or PictBridge 3 Dock the camera or connect a compatible device is not compatible Kodak card reader connected or a memory page 14 xi PictBridge i E E compatible device page 12 using a card reader make sure The printer dock is not a memory card is inserted connected to the computer The camera is not properly Reseat the camera on the printer seated on the connector _ dock page 9 46 N www kodak com go support Troubleshooting Picture Size lights Light status Action solution One light glows steady The indicated picture size is None required available and selected To change picture size press the Picture Size
8. button repeatedly All lights are off There are no pictures in the To enable the picture size camera on the card or on the option PictBridge compatible device 4 Take pictures The camera is not docked a 2 Dock the camera or compatible Kodak card reader or connect a compatible PictBridge compatible device is Kodak card reader not connected or a memory page 14 or PictBridge card is not inserted compatible device page 12 If using a card reader make sure a memory card is inserted The camera is not properly Reseat the camera on the seated on the connector printer dock page 9 The camera card reader or None required PictBridge compatible device is transferring pictures to the computer or has established an active connection to the computer Auto Enhance button light Light glows steady Auto Enhance has been applied to pictures None required green for the current print job Light is off Auto Enhance has not been selected None required NOTE Auto Enhance is only available when printing from a docked camera the SD MMC card slot or a connected Kodak 8 in 1 or Kodak 6 in 1 card reader www kodak com go support CEN 47 Troubleshooting Slide Show button light Light status Light glows steady The Slide Show feature is available Light blinks green Cause Action solution None required Press the Slide Show button to start The Slide Show is running None reguired To cance
9. camera 9 door accessory 13 14 15 20 27 28 29 cartridge ii 4 paper tray i 6 E EasyShare software See Kodak EasyShare software F FCC compliance 54 firmware upgrading 50 53 four way control i H help software 50 telephone support 51 troubleshooting 35 web links 50 hole locator for dock 9 infrared device IR sensor 16 printing from 16 insert camera 1 2 custom 2 universal ii 2 installing battery 7 camera insert 2 paper tray 6 software 22 IR sensor for remote infrared device i 16 IrDA wireless technology 16 J Japanese compliance 55 EN 57 Index K Kodak card reader printing from 14 transferring pictures from 28 Kodak EasyShare software help 50 installing 22 printing with 30 uninstalling 24 Kodak web sites 50 L layout See picture size light auto enhance i 18 47 battery charging i 10 44 color cartridge i 42 paper 43 picture size i 17 47 print 12 15 45 SD MMC card slot i 13 27 49 slide show i 21 48 Status descriptions 42 transfer i 26 27 28 29 46 USB device connector i 14 15 28 29 48 locator hole for dock 9 pin for camera ii 9 M Macintosh OS installing software on 22 system requirements 22 uninstalling software 24 maintenance care color cartridge 4 general 33 paper 5 paper feed roller 34 tips 53 MMC card reader See SD MMC card reader multi up See picture size P pac
10. customer support see page 51 Connect a tripod directly to the camera do not connect a tripod to the camera dock or printer dock Service agreements are available in some countries Contact a dealer of Kodak products for more information The printer dock and the AC power adapter contain a small amount of lead in the circuit board Disposal of this material may be regulated due to environmental considerations Disposal of the color cartridge is not regulated and should not be subject to state or local landfill incineration or recycling requirements For more disposal or recycling information contact your local authorities In the US visit the Electronics Industry Alliance Web site at www eiae org Upgrading your software and firmware Download the latest versions of the software included on the Kodak EasyShare software CD and the printer dock firmware the software that runs on the printer dock Visit www kodak com go printerdockdownloads www kodak com go support CEN 53 Appendix Regulatory information FCC compliance and advisory FC Kodak EasyShare printer dock plus This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed or used
11. in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures 1 reorient or relocate the receiving antenna 2 increase the separation between the equipment and the receiver 3 connect the equipment to an outlet on a circuit different from that to which the receiver is connected 4 consult the dealer or an experienced radio TV technician for additional suggestions Any changes or modifications not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment Where shielded interface cables have been provided with the product or specified additional components or accessories elsewhere defined to be used with the installation of the product they must be used in order to ensure compliance with FCC regulation Canadian DOC statement DOC Class B compliance This Class B digital apparatus complies with Canadian ICES 003 Observation des normes Class B Cet appareil num rique de la classe B est conforme a la norme NMB 003 du Canada 54 N www kodak com go support Appendix VCCI Class B ITE CORE RUR RE FEARS HERRAR
12. readers are not supported 1 Make sure Kodak EasyShare software is installed see page 22 and the printer dock is connected to your computer see page 25 2 Open the accessory door on the printer dock 3 Ifa Kodak EasyShare camera is docked remove it If there is a memory card in the SD MMC card slot remove it as well 4 Plug the USB connector from the card reader into the USB connector located on the side of the printer dock 5 Insert the memory card into the card reader see your card reader user s guide for details Do not insert more than one card at a time The USB device connector light blinks while the printer dock reads the card 6 Press the Transfer button H on the printer dock Kodak EasyShare software opens on your computer if it is installed 7 Use Kodak EasyShare software to transfer pictures from the printer dock to your computer See the Kodak EasyShare software Help for details The printer dock Transfer light blinks while the pictures are being transferred The Transfer light continues to blink until the Transfer or Print button Is pressed or until the connection times out NOTE With the software installed pressing the Transfer button establishes one or more new drive connections for the card reader You can view copy delete and otherwise manage tiles on the new drives as you do with other drives on your computer See your computer documentation for details m To stop transfer press the Cance
13. the Share menu highlight Cancel Prints then press the OK button To automatically print tagged pictures trom your Kodak Easyshare digital camera see page 15 To print tagged pictures from your computer see page 30 www kodak com go support CEN 11 Printing without a computer IMPORTANT Wait until printing is complete before removing paper or the paper tray Failure to do so can cause paper misfeeds or jams Printing from your EasyShare digital camera 1 Take a picture with your camera see your camera user s guide 2 Place the camera on the printer dock see page 9 The current or most recent picture appears on the camera screen m To print the current picture press the Print button NOTE If you tagged pictures for printing using your EasyShare digital camera instead of printing the current picture all tagged pictures will be printed see page 15 m To review and choose pictures to print press the Left Right control on the printer dock 4 For each picture you want to print press a w to select the number of copies When finished with your selections press the Print button D The Print light blinks and printing starts The paper cycles four times before it is ejected The first three passes apply layers of yellow magenta and cyan colors to the print and the fourth pass applies the Kodak XtraLife coating that protects and preserves the image To exit without printing press the Cancel butto
14. to get great natural color for everyday picture making default Enhanced to get richer more vivid colors None to disable automatic color correction To change the color mode Windows 2000 XP OS 1 From the Start menu select Settings then select Printers 2 Right click the printer dock icon then select Printing Preferences 3 Click the Advanced button 4 Under Document Options select Printer Features then select Kodak Color Mode Select a color mode option then click OK UI 6 Click OK when complete www kodak com go support CEN 31 Using the printer dock plus with a computer Windows 98 ME OS From the Start menu select Settings then select Printers Right click the printer dock icon then select Properties Click the Printer Options tab Under Color Control select a color mode option VU Aa W N Click OK when complete Mac OS X Make sure the printer dock is selected as the current printer From an application File menu select Print Click the drop down menu then select Color Select Kodak Color Select a color mode option O A WN Click OK when complete Canceling printing Canceling printing from the computer Windows OS based computer 1 Double click the printer icon in the system tray 2 Click the print job you want to cancel 3 Select Document then select Cancel Mac OS X 1 In Print Center double click the printer icon 2 Click the job you want to cancel then selec
15. Color cartridge light Light status Action solution IMPORTANT The color cartridge may lock in place if there is a paper error Do not attempt to remove the color cartridge without first clearing the paper error Make sure the Paper light is off before attempting to remove the color cartridge Light is off The color cartridge is properly None required installed and is working normally Light blinks Slow blink for 60 seconds the color None required amber cartridge is nearly depleted blink there is a color cartridge Clear the jam page 36 then press D color cartridge is depleted Install a new color cartridge page 4 then press Q The color cartridge is not installed or Remove and re install the color is not fully seated cartridge page 4 then press D 42 N www kodak com go support Troubleshooting Paper light Light status Action solution IMPORTANT The color cartridge may lock in place if there is a paper error Do not attempt to remove the color cartridge without first clearing the paper error Make sure the Paper light is off before attempting to remove the color cartridge Light is off The paper tray is properly installed None required and has an ample supply of paper Light blinks There is a paper jam Clear the jam page 36 then press amber ime Printing stopped during mid print Remove loose paper Check the the paper may be damaged or is__ paper supply Reload with new missing remo
16. Kodak EasyShare printer dock plus User s Guide www kodak com For interactive tutorials www kodak com go howto Eastman Kodak Company 343 State Street Rochester New York 14650 Eastman Kodak Company 2004 All screen images are simulated Kodak EasyShare and XtraLife are trademarks of Eastman Kodak Company P N 4J1218 Front top side view N Hd ND mu A W QQQGOOE Paper light fJ 12 Battery charging lights 13 Refresh button aw Color Cartridge light 14 Transfer button light 15 Slide Show button light fa 16 Auto Enhance button light Je 17 IR sensor for optional remote 18 or infrared device Paper tray 19 Paper tray door Print button light 20 4 way control gt a v www kodak com go support Product features Cancel button X Picture Size button Picture Size lights LI LL HH HA Accessory door SD MMC card slot light SD MMC card slot USB device connector light USB device connector for optional Kodak card reader or PictBridge compatible device Audio Video A V out connector for television viewing Product features Back top side view Ay CMH UN 1 Universal camera insert 6 Cooling vents installed as shown 2 Locator pin for camera 1 Slot for paper path 3 Camera connector 8 Color cartridge installed as shown 4 Power connector DC in 9 Cartridge door 5 USB connector to computer ii CEND www kodak com go support Table of conte
17. Kodak EasyShare printer dock plus is compatible with the Kodak 8 in 1 card reader and the Kodak 6 in 1 card reader each sold separately Other Kodak USB card readers may work with the printer dock plus however other manufacturers card readers are not supported NOTE To help you select pictures to print dock your EasyShare camera see page 9 before connecting the card reader 1 Open the accessory door on the printer dock 2 Plug the USB connector from the card reader into the USB connector located on the side of the printer dock NOTE If the card reader is already plugged in but the connection has timed out disconnect then reconnect the USB cable to re establish a connection 3 Insert the memory card into the card reader see your card reader user s guide for details Do not insert more than one card at a time The USB device connector light blinks while the printer dock reads the card then glows steady green m To print the current picture press the Print button D NOTE If you tagged pictures for printing using your EasyShare digital camera instead of printing the current picture all tagged pictures will be printed see page 15 m To exit without printing press the Cancel button XK Purchase a Kodak 8 in 1 card reader Kodak 6 in 1 card reader and other accessories at a retailer of Kodak products or visit www kodak com go accessories 14 GD www kodak com go support Printing without a computer Prin
18. RTANT Be careful not to rotate the spool more than necessary Doing so could reduce the number of prints you are able to make 3 Slide the color cartridge in label side up with the arrow pointing toward the printer dock Push the cartridge until it clicks into place 4 Close the cartridge door 4 Cn www kodak com go support Getting started m When the cartridge is almost empty the Color cartridge light blinks slowly for 60 seconds m When the cartridge is depleted the Color cartridge light glows steady amber S IMPORTANT The color cartridge may lock in place i if there is a paper error Do not attempt to remove the color cartridge without first clearing the paper error Make sure the Paper light is off before attempting to remove the color cartridge To remove the color cartridge open the color cartridge door then push up on the green lever and slide the cartridge out Handling and storing the paper m To avoid fingerprints handle the paper by the edges or by the perforated tabs Do not touch the glossy side of the paper m When storing remove the paper tray then close the paper tray cover and paper tray door to keep out dust and debris Store paper flat m Keep the paper away from direct sunlight and out of high temperature environments such as a vehicle parked in the sun www kodak com go support CEN 5 Getting started Loading the paper IMPORTANT Use only Kodak color car
19. al card reader 13 from Kodak card reader 14 from PictBridge compatible device 15 from wireless infrared device 16 improving quality with auto enhance 18 problems 35 tagged pictures 15 tagged pictures from computer 30 www kodak com go support Index tagging pictures on camera 11 with Kodak EasyShare software 30 with remote control 16 prints See pictures Q quality and picture size 17 improving with auto enhance 18 setting on camera 11 R recharging See charging recycling and disposal of batteries 8 of printer dock 53 refresh button i 10 of Ni MH rechargeable battery pack 10 regulatory information Canadian compliance 54 FCC compliance 54 VCCI compliance 55 remote control 16 requirements system 22 reviewing pictures 20 as slide show 21 on TV 20 S safety battery 8 general 53 SD MMC card reader card slot i 13 27 card slot light i 13 27 49 printing from 13 transferring pictures from 27 sensor See IR sensor CEN 59 Index service and support 51 setup camera printer dock 1 slide show 21 software 22 size picture See picture size slide show 21 button light i 21 48 slot paper path ii software help 50 installing 22 Kodak EasyShare printing with 30 minimum system reguirements 22 printing from applications 31 uninstalling 24 upgrading 50 53 specifications 52 status lights 42 supplies amp accessories ordering 50 suppor
20. ately see a retailer of Kodak products or visit www kodak com go accessories Connecting to your television 1 Open the accessory door on the printer dock Connect the A V cable from the printer dock A V out connector to the television video in port yellow and audio in port white Set Video Out NTSC or PAL on your camera to the format used in the region you live in See your camera user s guide for details Place the camera on the printer dock A message appears on the camera screen asking you to select a video display Press 4 b on the printer dock to choose either the camera or the TV then press f Turn on your television and select a video channel see your television user s guide for details Follow the instructions on the screen Continue using the printer dock as usual 20 EN www kodak com go support Reviewing pictures Running a slide show The Slide Show feature lets you automatically review pictures and videos stored on your EasyShare digital camera 1 Place the Kodak EasyShare digital camera in the printer dock m To view the slide show on a television connect the printer dock to a TV see page 20 betore docking your camera 2 Press the Slide Show button aj The pictures and videos are displayed in the order in which you took them The slide show is finished when The End appears on the screen m To manually navigate through pictures and videos during the slide show press on the pr
21. bleshooting When you have questions about your printer dock start here Additional technical information is available in the ReadMe file located on the Kodak EasyShare software CD For updates to Troubleshooting information visit www kodak com go printerdocks Printing problems He Try the following Paper does not IMPORTANT Use only Kodak color cartridge amp paper kits for feed your printer dock Do not use inkjet paper Paper light may m The paper tray may be empty Load paper page 6 re install glow steady the paper tray then press L amber m Check the paper Remove the paper tray page 6 Inspect the paper supply make sure paper is not damaged in any way or removable tabs have not been detached Replace with new paper if necessary Carefully fan the paper to keep the sheets from sticking together Reload the paper tray Do not exceed the fill line Re install the paper tray then press 2 to resume printing Clean the paper feed roller page 34 Multiple sheets of 1 Remove the paper tray page 6 paper are pulled Remove the paper supply from the paper tray Carefully fan through printer the paper to keep the sheets from sticking together Reload the paper tray Do not exceed the fill line Re install the paper tray then press L to resume printing www kodak com go support CEN 35 Troubleshooting Try the following Printer is jammed IMPORTANT Use only Kodak color cartridge amp paper ki
22. camera and battery have Slowly return the camera and been exposed to extreme battery to room temperature temperatures Descending blinking The Ni MH battery pack Leave the camera on the green lights refresh cycle is in progress dock to continue the refresh discharging Lights turn off cycle page 10 as discharging progresses 44 N www kodak com go support Troubleshooting Print button light Light status Action solution Light glows steady The printer dock is ready for None required green printing Light blinks green The printer dock is printing Light is off There are no pictures in the None required camera or on the card To enable Print The camera is not docked ora 1 Take pictures compatible Kodak card reader 2 Dock the camera or is not connected connect a compatible Kodak card reader page 14 If using a card reader make sure a memory card is inserted The camera is not properly Reseat the camera on the seated on the connector printer dock page 9 The camera or card reader is None required transferring pictures to the When transfer is complete computer or has established press the blinking Transfer an active connection to the button H computer A PictBridge compatible None required device is connected The Print button is disabled print command is controlled from the PictBridge compatible device To print from another source unplug the PictBridge compatible device
23. contacts with a clean dry cloth before loading batteries in the camera Battery performance is reduced at temperatures below 41 F 5 C When using your camera in cold weather carry spare batteries and keep them warm Do not discard cold batteries that do not work when they return to room temperature they may be usable If you are getting fewer than 20 pictures per charge with your Ni MH rechargeable battery pack and if none of the tips above seem to help consider refreshing the battery pack see page 10 For more information on batteries see your camera user s guide or visit www kodak com global en service batteries batteryUsage jhtml CEN www kodak com go support Setting up your EasyShare digital camera Docking and charging your EasyShare digital camera Docking your Kodak EasyShare digital camera lets you review and print pictures directly from the camera transfer pictures trom the camera to the computer and charge the camera battery 1 Make sure a dock insert is installed on the printer dock see page 2 and a dock rechargeable battery is installed in the camera see page 7 l 2 On the camera bottom find the dock O 44 connector and locator hole Place the camera on the printer dock making sure to align the dock connector and locator hole with the camera connector and locator pin Push down to seat the connector Keep the camera wrist strap clear of the paper path to the front and rear
24. de for details Edit the picture using Kodak EasyShare software on your computer See the EasyShare software Help for details www kodak com go support CEN 37 Troubleshooting He Try the following Print is too dark or Use the Auto Enhance button to automatically correct is discolored exposure problems page 18 Try re taking the picture with the flash on or move within the flash range of the camera See your camera user s guide for details Adjust the exposure compensation on your camera and try re taking the picture See your camera user s guide for details Edit the picture using Kodak EasyShare software on your computer See the EasyShare software Help for details Make sure the printer dock is not placed in direct sunlight or is not operating in a high temperature environment Make sure the cooling vents are not blocked or dirty page 2 Pictures are Set your camera to Best 3 2 picture quality See your camera cropped user s guide for details Adjust cropped pictures using Kodak EasyShare software on your computer If you are printing from an application on your computer select the proper paper size in print options A selected picture The image file may be corrupt Review the picture on the does not print camera or computer and delete if necessary The image file may not be JPEG format The printer dock can only print JPEG files in standalone mode Connect to a computer page 25 and use EasyShare so
25. ed or is improperly inserted in SD MMC card slot Still having problems Visit www kodak com go support or see Chapter 9 Getting help www kodak com go support CEN 49 Getting help Helpful links Printer dock Get information and support for your Iwww kodak com go printerdocks product Download the latest printer dock www kodak com go printerdockdownloads software firmware and drivers Software Get information on Kodak EasyShare www kodak com go easysharesw software or click the Help button in EasyShare software Get help with the Windows operating Iwww kodak com go pcbasics system and working with digital pictures Other Register your printer dock www kodak com go register Purchase a full range of printer dock and www kodak com go accessories camera accessories See online demonstrations of your www kodak com go howto product Get support for other printer docks www kodak com go support cameras software accessories more 50 CN www kodak com go support Getting help Telephone customer support If you have questions concerning the operation of the printer dock software or camera you may speak with a customer support representative Before you call Have the printer dock or camera connected to your computer Be at your computer and have the following information available m Computer model m Amount of free hard disk space mM Operating system m Version of Kodak EasySha
26. ed when printing from a computer If printing from a computer see page 30 use the Kodak EasyShare software on your computer Printing time may slightly increase when using Auto Enhance Canceling printing m Press the Cancel button X The print job is canceled and ejected from the printer dock If you cancel printing during the fourth pass clear coat the paper is ejected upon completion 18 N www kodak com go support Printing without a computer Removing the perforated tabs from the paper IMPORTANT Remove perforated tabs only after printing Paper missing perforated tabs will not feed properly 1 Fold the tabs up then down 2 Remove each tab and discard www kodak com go support CEN 19 Reviewing pictures To review pictures stored on your Kodak EasyShare CX DX6000 7000 or LS600 700 series digital camera 1 Place the Kodak EasyShare digital camera in the printer dock see page 9 2 Press 4 p on the printer dock to scroll through the pictures or press the Slide Show button fay see page 21 Displaying pictures on a television With a docked camera you can view pictures on a television monitor or any device equipped with a video input Image quality on a television screen may not be as good as on a monitor or when printed An Audio Video A V cable is required to connect to a television Use the A V cable that came with your Kodak EasyShare digital camera if included To purchase one separ
27. er dock 7 printing from 12 setting picture guality 11 tagging pictures for printing 11 transferring pictures from 26 Canadian compliance 54 cancel button i 12 13 14 15 18 26 21 28 29 canceling printing 12 13 14 18 32 transfer 26 27 28 29 card reader See Kodak card reader or SD MMC card reader care amp maintenance color cartridge 4 general 33 paper 5 paper feed roller 34 tips 53 traveling with printer dock 34 cartridge See color cartridge charging camera battery 9 10 lights i 9 10 44 www kodak com go support color cartridge door il 4 handling storing 4 installing removing 4 light i 42 color automatic correction 31 computer connecting to 25 installing software 22 printing from 30 system requirements 22 transferring pictures to 26 27 28 29 uninstalling software 24 connecting Kodak card reader 14 28 PictBridge compatible device 15 29 power 3 to computer 25 to television 20 connector A V out i 20 camera ii power DC in ii 3 USB from device i 14 15 28 29 USB to computer ii 25 contents package 1 cooling vents ii 33 38 40 copies selecting number of 11 12 13 14 18 21 cord See cable custom camera insert installing 2 customer support 50 51 D DC in power connector il 3 display using TV as 20 disposal and recycling of batteries 8 of printer dock 53 www kodak com go support Index docking amp charging
28. er slot on the back of the printer dock Remove loose paper from the printer dock If paper is jammed see page 36 Inspect the paper supply make sure removable tabs have not been detached from the paper Reload with new paper if necessary Carefully fan the paper to keep the sheets from sticking together Reload the paper tray Do not exceed the fill line Re install the paper tray then press to resume printing mM Clean the paper feed roller page 34 Print is smudged m Fingerprints may be on glossy side of paper Handle paper by the edges or by the removable tabs page 5 Print is spotted mi Check to see if the paper is dirty and use a dry lint free cloth to wipe clean For excessive dirt or debris thoroughly clean the paper tray and load new paper page 6 NOTE When storing paper remove and close the paper tray and paper tray door to keep dust and debris from collecting on the paper or inside the printer dock page 5 Print is too light IMPORTANT Use only Kodak color cartridge amp paper kits for your printer dock Do not use inkjet paper Use the Auto Enhance button to automatically correct exposure problems page 18 Make sure the paper is loaded with the Kodak logo facing down Reload if necessary page 6 Try re taking the picture with the flash off See your camera user s guide for details Adjust the exposure compensation on your camera and try re taking the picture See your camera user s gui
29. forated tabs Picture resolution Image storage Thermal dye transfer Temperature 50 to 95 F 10 to 35 C Humidity 10 to 86 RH Output 24 V DC Input 100 V to 240V AC 50 60 Hz connection via AC power adapter Consumption while printing 60 watts maximum lt 60 sec standalone and with computer NOTE Print speed is dependent on picture size number of continuous prints and environmental conditions Without paper tray 5 28 x 7 40 x 3 27 in 134 x 188 x 83 mm With paper tray 13 15 x 7 40 x 3 27 in 334 x 188 x 83 mm Laz Without paper tray 33 5 oz 950 g With paper tray 39 2 oz 1110 g 4x6 in 102 x 152 mm 4x 7 13 in 102 x 181 mm 300 ppi continuous tone Optional MMC or SD Card Sp The SD logo is a trademark of the SD Card Association www kodak com go support Appendix Additional safety and maintenance tips Always follow basic safety precautions Refer to the Important Safety Instructions sheet packed with your printer dock Do not allow chemicals such as suntan lotion to come into contact with the painted surface of the printer dock If the printer dock has been subjected to inclement weather or you suspect water has gotten inside the printer dock turn off the printer dock and remove the paper tray and color cartridge Allow all components to air dry for at least 24 hours before using the printer dock again If this does not resolve the problem contact
30. ftware to print BMP and TIFF formats page 30 Nothing happens Check the power connections page 3 when you try to Remove the paper tray check that paper is properly loaded print and re install page 6 If the Paper light glows steady amber load paper page 6 Make sure the color cartridge is properly installed page 4 If Color cartridge light is on install a new cartridge Nothing happens The camera is not properly seated on the connector Reseat when you try to the camera on the printer dock page 9 print from a m Re establish the connection remove then reseat the camera docked camera on the printer dock m Make sure there is at least one picture in the camera s internal memory or memory card 38 N www kodak com go support Troubleshooting He Try the following Nothing happens NOTE The Kodak EasyShare printer dock plus is compatible with the when you try to Kodak 8 in 1 card reader and the Kodak 6 in 1 card reader each print from a sold separately Other Kodak USB card readers may work with the Kodak card printer dock plus however other manufacturers card readers are reader not Supported Check the USB connections from the card reader to the printer dock page 14 Re establish the connection disconnect then reconnect the USB cable from the card reader to the printer dock Make sure a memory card is inserted and that there is at least one picture on the memory card Nothing happens C
31. ge 25 2 Place the camera on the printer dock see page 9 3 Press the Transfer button H on the printer dock Kodak EasyShare software opens on your computer if it is installed 4 Use Kodak EasyShare software to transfer pictures from the printer dock to your computer See the Kodak EasyShare software Help for details The printer dock Transfer light blinks while the pictures are being transferred The Transfer light continues to blink until the Transfer or Print button is pressed the camera is removed from the printer dock or the connection times out NOTE With the software installed pressing the Transfer button establishes a new drive connection for the docked camera You can view copy delete and otherwise manage files on the new drive as you do with other drives on your computer See your computer documentation for details m To stop transfer press the Cancel button 26 CEN www kodak com go support Using the printer dock plus with a computer Transferring pictures from the internal SD MMC card reader 1 Make sure Kodak EasyShare software is installed see page 22 and the printer dock is connected to your computer see page 25 2 Open the accessory door on the printer dock 3 Ifa Kodak EasyShare camera is docked remove it IMPORTANT Insert card only as shown Do not force the card into the card slot Do not insert or remove a card when the printer dock is transferring pictures or if the USB device connector l
32. heck the USB connections from the PictBridge compatible when you try to device to the printer dock page 15 print from a Re establish the connection disconnect then reconnect the PictBridge USB cable trom the PictBridge compatible device to the printer compatible device dock Make sure there is at least one picture in the PictBridge compatible device s internal memory or memory card Nothing happens Check the USB connections from the printer dock to the when you try to computer page 25 print from the The computer may be transferring pictures Wait a few computer seconds then try to again m Access the printer menu for your system Remove check marks next to Pause Printing and Offline if checked m Close unnecessary software applications Disconnect then reconnect the USB cable from the printer dock to the computer page 25 m Make sure Kodak EasyShare software is installed page 22 Install if necessary If you choose Custom installation make sure to install the printer driver Uninstall then reinstall Kodak EasyShare software page 22 mM Make sure your computer meets the minimum system requirements page 22 Upgrade your system if necessary www kodak com go support CEN 39 Troubleshooting He Try the following Printing is slow NOTE When printing a large number of prints printing may slow down to prevent the print head from overheating Make sure the printer dock is not placed in direct
33. hing happens Press the Transfer button H on the printer dock when you try to Check the power and USB connections from the printer dock transfer pictures to to computer page 25 the computer The camera is not properly seated on connector Reseat the camera on the printer dock page 9 If you are trying to transfer pictures from a compatible Kodak card reader page 28 or a PictBridge compatible device page 29 check the USB connections between the printer dock and the card reader or device NOTE The Kodak EasyShare printer dock plus is compatible with the Kodak 8 in 1 card reader and the Kodak 6 in 1 card reader each sold separately Other Kodak USB card readers may work with the printer dock plus however other manufacturers card readers are not supported Close unnecessary software applications and minimize remaining application windows Follow any messages on the screen that may have been hidden by other windows Disconnect then reconnect the USB cable from the printer dock to the computer page 25 Make sure Kodak EasyShare software is installed page 22 Install if necessary If you choose Custom installation make sure to install the printer driver Uninstall then reinstall Kodak EasyShare software page 22 Make sure your computer meets the minimum system requirements page 22 Upgrade your system if necessary www kodak com go support CEN 41 Troubleshooting Printer dock plus status lights
34. ice You can view copy delete and otherwise manage files on the new drive as you do with other drives on your computer See your computer documentation for details m To stop transfer press the Cancel button XK www kodak com go support CEN 29 Using the printer dock plus with a computer Printing from a computer We recommend using Kodak EasyShare software included for printing This software lets you take advantage of a wide range of features including full color enhancement red eye reduction picture organization and much more If there are no pictures on your computer use the printer dock to transfer pictures trom your camera or memory card before printing see page 26 IMPORTANT Wait until printing is complete before removing paper or the paper tray Failure to do so can cause paper misfeeds or jams Printing with Kodak EasyShare software 1 Make sure Kodak EasyShare software is installed see page 22 and the printer dock is connected to your computer see page 25 Click the My Collection tab Select the pictures you wish to print Click the Print at Home tab Make sure the printer dock is selected as the current printer O U A W N Change any other settings such as paper size and print layout then click Print NOTE The Picture Size and Auto Enhance buttons on the printer dock are disabled when printing from a computer Set printing options using EasyShare software Printing tagged pictures from your c
35. ight is blinking 4 Orient the card as shown then push the card into the SD MMC card slot to seat the connector The SDIMMC card slot light blinks while the printer dock reads the card 5 Press the Transfer button H on the printer dock Kodak EasyShare software opens on your computer if it is installed 6 Use Kodak EasyShare software to transfer pictures from the printer dock to your computer See the Kodak EasyShare software Help for details The printer dock Transfer light blinks while the pictures are being transferred The Transfer light continues to blink until the Transfer or Print button Is pressed or until the connection times out NOTE With the software installed connecting the printer dock to the computer establishes a new drive connection for the internal card reader Pressing the Transfer button lets you view copy delete and otherwise manage files on the new drive as you do with other drives on your computer See your computer documentation for details m To stop transfer press the Cancel button XK To remove the card pull it out www kodak com go support CEN 27 Using the printer dock plus with a computer Transferring pictures from a Kodak card reader The Kodak EasyShare printer dock plus is compatible with the Kodak 8 in 1 card reader and the Kodak 6 in 1 card reader each sold separately Other Kodak USB card readers may work with the printer dock plus however other manufacturers card
36. inter dock m During the slide show you can select pictures to print by pressing f Press 4 w to choose the number of copies for that picture IMPORTANT If after you press JA you decide not to print the picture select 0 on the copies screen before resuming the slide show or press X to exit the print screen altogether To resume the slide show press fan If no button is pressed after a short time the slide show resumes automatically m To cancel the slide show in progress press the Cancel button X When the slide show ends all pictures you selected for printing are printed Changing the slide show settings See your Kodak EasyShare digital camera user s guide for information on changing the slide show interval and setting the slide show loop www kodak com go support EN 21 Installing software Minimum system requirements Windows OS based computers Macintosh computers m Windows 98 98SE ME 2000 SP1 mm Power Mac G3 G4 G5 G4 Cube iMac or XP OS PowerBook G3 G4 or iBook computers M Internet Explorer 5 01 or higher m Mac OS X version 10 2 3 m 233 MHz processor or greater m Safari 1 0 or higher for Complete m 64 MB RAM 128 MB RAM for installation Windows XP OS m 128 MB RAM m 200 MB hard disk space available MM 200 MB hard disk space available m CD ROM drive m CD ROM drive m Available USB port m Available USB port Color monitor 800 x 600 pixels mM Color monitor 1024 x 768 pixels 16 bit or 24 bit
37. kage contents 1 paper feed roller cleaning 34 handling storing 5 light i 43 loading 6 slot ii paper tray i 1 door installing removing 6 PictBridge compatible device printing from 15 transferring pictures from 29 picture size 1 button i 17 lights i 17 47 pictures automatic color correction of 31 changing size layout 17 printing from internal card reader 13 printing from Kodak card reader 14 printing from PictBridge compatible device 15 printing from wireless infrared device 16 printing tagged 15 printing with remote control 16 guality and picture size 17 quality improving with auto enhance 18 quality setting on camera 11 reviewing 20 selecting number of copies 11 12 13 14 18 21 www kodak com go support size selection See picture size tagging for printing 11 transferring from camera 26 transferring from internal card reader 27 transferring from Kodak card reader 28 transferring from PictBridge compatible device 29 viewing on TV 20 viewing slide show 21 pin locator for camera ii 9 power AC adapter amp cord 1 3 connecting 3 connector DC in ii 3 print button light i 12 13 14 15 20 45 print order bypassing 15 creating on camera tagging pictures 11 printing 15 printer driver installing 22 updating 50 53 printing canceling 12 13 14 18 32 from a computer 30 from applications 31 from docked camera 12 from intern
38. l button XK 28 CEN www kodak com go support Using the printer dock plus with a computer Transferring pictures from a PictBridge compatible device 1 Make sure Kodak EasyShare software is installed see page 22 and the printer dock is connected to your computer see page 25 2 Open the accessory door on the printer dock 3 Ifa Kodak EasyShare camera is docked remove it If there is a memory card in the SD MMC card slot remove it as well 4 Plug the USB connector from the PictBridge compatible device into the USB device connector located on the side of the printer dock The USB device connector light blinks while the printer dock reads the device A NOTE If the PictBridge compatible device is already plugged in but the connection has timed out disconnect then reconnect the USB cable to re establish a connection UI Press the Transfer button H on the printer dock Kodak EasyShare software opens on your computer if it is installed DN Use Kodak EasyShare software to transfer pictures from the printer dock to your computer See the Kodak EasyShare software Help for details The printer dock Transfer light blinks while the pictures are being transferred The Transfer light continues to blink until the Transfer or Print button Is pressed or until the connection times out NOTE With the software installed pressing the Transfer button establishes a new drive connection for the PictBridge compatible dev
39. l the Slide Show press XX None required To run a Slide Show see page 21 The Slide Show feature is not available NOTE The Slide Show feature is only available if a camera is docked USB device connector light Light status Light blinks green Light is off 48 N Slow blink the device is initializing or communicating with the printer dock Fast blink there is a device or Check the USB connections from communication error the device to the printer dock page 15 Disconnect then reconnect USB cable trom printer dock to device Check the USB connections from the device to the printer dock page 15 Disconnect the device Connect a Kodak 8 in 1 or Kodak 6 in 1 card reader or a PictBridge compatible device There is no device connected to the USB device connector on the printer dock The connection between the printer dock and device is loose A device other than a compatible Kodak card reader or PictBridge compatible device is connected www kodak com go support Troubleshooting SD MMC card slot light Light status Light blinks green Slow blink the SD MMC_ None required card reader is initializing or communicating with the printer dock Fast blink there is a card Remove the card and make sure the Or communication error card is not write protected or damaged Replace with a new card if necessary Reinsert the card The SD MMC card is not None required insert
40. n X 12 www kodak com go support Printing without a computer Printing from the internal SD MMC card reader Use the built in card slot to print pictures directly from your SD MMC card NOTE To help you select pictures to print dock your EasyShare camera see page 9 before inserting the card into the SD MMC card slot 1 Open the accessory door on the printer dock IMPORTANT Insert card only as shown Do not force the card into the card slot and do not insert or remove a card when the printer dock is transferring pictures see page 27 2 Orient the card as shown then push the card into the SD MMC card slot to seat the connector NOTE If an SD MMC card is already inserted but the connection has timed out remove then reinsert the card to re establish a connection The SD MMC card slot light blinks while the printer dock reads the card then glows steady green m To print the current picture press the Print button L NOTE If you tagged pictures for printing using your EasyShare digital camera instead of printing the current picture all tagged pictures will be printed see page 15 m To exit without printing press the Cancel button X To remove the card pull it out Purchase an SD or MMC card and other accessories at a retailer of Kodak products or visit www kodak com go accessories www kodak com go support CEN 13 Printing without a computer Printing from a Kodak card reader The
41. nents such as the printer driver or 5 select Remove to uninstall all components Follow the on screen instructions Restart the computer if prompted Mac OS X 1 U Aa W N Double click the operating drive for your system Select Library then select Printers Open the Kodak folder then open the printer dock folder Double click the printer dock uninstaller program Follow the on screen instructions 24 CEN www kodak com go support Using the printer dock plus with a computer Connecting to a computer A USB cable is required to connect the printer dock to a computer Use the USB cable that came with your Kodak EasyShare digital camera To purchase a cable separately see a retailer of Kodak products or visit www kodak com go accessories IMPORTANT Make sure your camera is NOT docked when you connect the printer dock to the computer 1 Make sure Kodak EasyShare software is installed on the computer see page 22 2 Plug the labeled h end of a USB cable into the labeled USB port on your computer See your computer documentation for details 3 Plug the other end of the USB cable into the square USB connector on the back of the printer dock www kodak com go support CEN 25 Using the printer dock plus with a computer Transferring pictures from your Kodak EasyShare digital camera 1 Make sure Kodak EasyShare software is installed see page 22 and the printer dock is connected to your computer see pa
42. ng progresses Ascending steady Charging battery pack green lights lights turn on as charging progresses Charging is complete when II three li it eee all three lights are lit NOTE Refreshing works with the Kodak EasyShare Ni MH rechargeable battery pack only Li lon batteries do not require refreshing 10 N www kodak com go support Setting up your EasyShare digital camera Setting the picture quality Before taking pictures change the Picture Quality setting on your Kodak EasyShare digital camera to Best 3 2 ye tx Ye This helps ensure that the pictures you take are proportional to the printer dock paper preventing unwanted cropping of your pictures See your camera user s guide for more information Tagging pictures for automatic printing On your Kodak EasyShare digital camera 1 Press the Share button 2 Press 4 h to locate a picture 3 Make sure Print 4 is highlighted to tag all pictures in the current image storage location highlight Print All C then press the OK button 4 Press a w to select the number of copies 0 99 The default is one Zero removes the tag for a selected picture The Print icon Ly is displayed in the status area m To apply a print quantity to other pictures press 4 P to locate them Keep the print quantity as is or press a w to change it 5 Press the OK button 6 Press the Share button to exit NOTE To remove print tagging from all pictures from
43. nts 1 Getting started osis eat ba abses Man alan sana Ui 1 Package COMTES Liam sma aed as ee 1 Finding a location for your printer dock plus oooooo Woo 2 Installing the custom camera inSert oooo WoWooWoWoWo 2 Connecting the POST co an temen telan aabitemdabasi 3 Handling and storing the color cartridge ooo oWoWoWoo 4 Installing and removing the color cartridge oooooWoWooo 4 Handling and storing the paper ooo oWoWoWoWoWo oo 5 I GING UNG ACM se cans AN 6 Installing and removing the paper tray ooooooWoWoWoWo Wo 6 2 Setting up your EasyShare digital camera W o ooo o 7 Choosing the right camera battery ooooWooooWoWoWoo 7 Important battery information azcscencocaneonerta ngcaseunancscametseeacqumeenosinis 8 Docking and charging your EasyShare digital camera 9 setting the pict re QUAI nasi mnta inka Talita sanak 11 Tagging pictures for automatic printing ooooWoWooWo 11 3 Printing without a computer oooo o oo Wo WWW 12 Printing from your EasyShare digital camera oooooWoo 12 Printing from the internal SD MMC card reader oo oooWooo 13 Printing from a Kodak card reader ooooo ooooWoWoWo Woo 14 Printing tagged CUES ana tatnoetan amanah asha asu tata TAN ini 15 Printing from a PictBridge compatible device oooooooWoo 15 Wireless PUNUIN srecan E Ai 16 Changing the printed picture size oo
44. of the printer dock The camera is now powered by the printer dock instead of the camera battery The Kodak EasyShare Ni MH rechargeable battery pack and the Kodak EasyShare Li lon rechargeable battery charge up to 3 hours The Battery charging lights turn on as charging progresses Charging is complete when all three lights are lit You may leave the camera in the printer dock to maintain the charge www kodak com go support CEN 9 Setting up your EasyShare digital camera Refreshing the Ni MH rechargeable battery pack If you are getting fewer than 20 pictures per charge with your Ni MH rechargeable battery pack follow the tips under Extending battery life page 8 If these don t help the battery pack needs to be refreshed The refresh cycle completely discharges the battery pack then fully recharges it NOTE A full retresh cycle can take up to 8 hours depending on how much charge is left in your battery pack For best results retresh the battery pack overnight do not interrupt the discharge recharge cycle 1 Make sure the Ni MH rechargeable battery pack is in the camera 2 Place the camera on the printer dock see page 9 3 Press and hold the Battery charging lights Refresh button ee until the Battery charging lights begin flashing green approximately 5 seconds The charging lights monitor the refresh status Descending blinking Discharging battery pack lights turn off as dischargi
45. ok their best we recommend that you keep the paper feed roller clean Inspect the roller weekly for debris particles and clean if necessary IMPORTANT Unplug the power before cleaning the paper feed roller 1 Unplug the AC power cord from the power outlet 2 Remove the paper tray from the printer dock and leave the paper tray door open 3 Lightly moisten a lint free cloth with water IMPORTANT Do not use cotton or cotton swabs to clean the print roller 4 Use the moistened cloth to gently wipe clean the surface of the paper feed roller Advance the feed roller with your thumb as necessary and continue cleaning 5 Allow the paper feed roller to fully dry before reconnecting the power Traveling with your printer dock IMPORTANT When traveling keep the printer dock accessories and supplies away from direct sunlight and out of high temperature environments such as a vehicle parked in the sun Consider purchasing the AC power cord for the region to which you are traveling 1 Disconnect the power and remove all cables 2 Remove the paper tray from the printer dock close the paper tray cover and the paper tray door on the printer dock 3 Repack the printer dock in the original packing box or use the optional printer dock travel bag Purchase an AC power cord printer dock travel bag and other accessories at a retailer of Kodak products or visit www kodak com go accessories 34 GD www kodak com go support Trou
46. omputer 1 Make sure Kodak EasyShare software is installed see page 22 and the printer dock is connected to your computer see page 25 2 Transfer the tagged pictures to your computer see page 26 3 Follow steps 4 through 6 above See the EasyShare software Help for details 30 N www kodak com go support Using the printer dock plus with a computer Printing using other applications 1 Make sure the printer driver is installed see page 22 and the printer dock is connected to your computer see page 25 2 Open the pictures you wish to print in the application from which you want to print 3 Access printer settings by selecting Print or Page Setup from the File menu depending on your application and operating system 4 Make sure the printer dock is selected as the current printer and that paper size is set to 4 x 6 in 102 x 152 mm 5 Change any other settings as needed then click OK or Print Depending on your application and operating system you may first need to return to the main menu and select Print from the File menu NOTE The Picture Size and Auto Enhance buttons on the printer dock are disabled when printing from a computer Set printing options in the application trom which you are printing Choosing a color mode Kodak s color mode feature uses automatic color correction to help you make great looking prints in no time The Kodak EasyShare printer dock plus features three color mode options Natural
47. ont of the insert down and snap ws into place A Connecting the power RISK OF ELECTRIC SHOCK Use only the AC power adapter included with your printer dock Other adapters or cords can damage your camera printer dock or computer 1 Remove the camera from the printer dock 2 Connect the AC power cord to the AC power adapter then to the back of the printer dock NOTE The AC power cord included with your printer dock may be different from the one shown 3 Connect the AC power cord into a power outlet Purchase an AC power cord and other accessories at www kodak com go accessories www kodak com go support CEN 3 Getting started Handling and storing the color cartridge m For best quality prints store the color cartridge in a location where the temperature does not exceed 85 F 30 C m To avoid getting fingerprints on the ribbon handle the color cartridge by the spool ends m Keep the color cartridge away from direct sunlight and out of high temperature environments such as a vehicle parked in the sun Installing and removing the color cartridge IMPORTANT Use only Kodak color cartridge amp paper kits for your printer dock Do not force the cartridge in or out of the printer dock 1 Open the cartridge door on the side of the printer dock 2 Check to make sure there is no slack in the color cartridge ribbon To remove slack push in on the cartridge spool then rotate the spool clockwise IMPO
48. oo oooWoWo Wo 17 Enhancing your DICTUIES x sciccecsiscntesbsennseetenstabewseheedisaeatestwnsh eanehwiuinded 18 Canceling PNUM essers ninaa eios siena 18 Removing the perforated tabs from the paper oooooo 19 4 Reviewing pictures o ooooWoWo Woo WWW mmm 20 Displaying pictures ON a television o ooooo ooWoWoWo Woo 20 Running a slide SNOW w o co orooooocooooooWoococo wo Wooodowocmo ooiwdeiinenn kan 21 www kodak com go support CEN iii 5 Installing software ooooo WoWoWo om ooW oW WWW mh 22 Minimum system requirements ooooo oom mm 22 Installing the SOT WAN Gali Bemnbisemm bela a ntah dean mann aii 22 6 Using the printer dock plus with a computer 25 Connecting to a computer cornea atone an incite 25 Transferring pictures from your Kodak EasyShare digital camera 26 Transferring pictures from the internal SD MMC card reader 21 Transferring pictures trom a Kodak card reader 28 Transferring pictures from a PictBridge compatible device 29 Printing Om COMMUN hana beats 30 Canceling PN bana 32 7 Care and maintenance manek 33 General CANS ee uan an RN OB aus 33 Cleaning the paper feed roller oooooco oWoWo o oo 34 Traveling with your printer COCK oooooWoWoWoW Wo WoWoWo Wo Wo W W W 34 TROUDIESHOO FING Lean 35 PFI EI NOON CNS tates ssc an aan 35 Transfer communication problems ooWo Wo Wo WoWoWo 41 Printer dock plus status lights
49. re software m Processor type and speed MHz Printer dock and camera serial numbers m Amount of memory MB m Exact error message you received Australia 1800 147 701 Malaysia 1 800 803 418 Austria 0179 567 357 Belgium 02713 1445 New Zealand 0800 440 786 Brazil 0800 150000 Norway Norge 23 16 21 33 Canada 1 800 465 6325 Philippines 1 800 1 888 9600 China 800 820 6027 Metro Manila only 632 636 9600 Denmark 3 848 71 30 Portugal 021415 4125 Ireland 01 407 3054 Singapore 800 6363 036 Finland 0800 1 17056 Spain 91 749 76 53 France 01 55 1740 77 Sweden 08 587 704 21 Germany 069 5007 0035 Switzerland 01 838 53 51 Greece 00800 44125605 Taiwan 0800 096 868 Hong Kong 800 901 514 Thailand 001 800 631 0017 India 9122 617 5823 United Kingdom 0870 243 0270 Indonesia 001 803 6310010 United States 1 800 235 6325 Italy 02 696 33452 Outside the United States 585 726 7260 Japan 03 5540 9002 International Toll Line 44 131 458 6714 Korea 00798 631 0024 International Toll Fax 44 131 458 6962 For the most up to date listings visit http Awww kodak com US en digital contacts DAlInternationalContacts shtml www kodak com go support CEN 51 Appendix Printer dock plus specifications For more specifications visit www kodak com go printerdocks Printer dock specifications Printing process Operating environment for optimum picture guality Weight Print size Paper size with per
50. recommended thousands or millions of colors recommended Large print jobs may require additional disk space Installing the software IMPORTANT Install Kodak EasyShare software before connecting the printer dock to the computer 1 Close all software applications that are open on your computer including anti virus software 2 Place the Kodak EasyShare software CD into the CD ROM drive 3 Load the software Windows OS based computer f the install window does not appear choose Run from the Start menu and type d setup exe where d is the drive letter that contains the CD Mac OS X double click the CD icon on the desktop then click the Install icon 22 CEND www kodak com go support Installing software 4 Follow the on screen instructions to install the software m Select Complete to automatically install the most commonly used applications Select Custom to choose the applications you wish to install IMPORTANT To use the printer dock plus with a computer you must install the printer driver If you choose Custom installation make sure the printer dock Is selected The printer driver is automatically installed if you choose Complete installation Add the printer for Mac OS X a Open the finder window and click the Applications button If you don t see the Applications button open the Applications folder on your operating drive b Open the Utilities folder then double click Print Center c Inthe Prin
51. sunlight or is not operating in a high temperature environment Make sure the cooling vents are not blocked or dirty page 2 Close unnecessary software applications Make sure your computer meets the minimum system requirements page 22 Upgrade your system if necessary Unable to remove IMPORTANT The color cartridge may lock in place if there is color cartridge a paper error Do not attempt to remove the Paper light may color cartridge without first clearing the paper glow steady error Make sure the Paper light is off before amber or blink attempting to remove the color cartridge m Check to see if the paper tray is empty or if paper is missing perforated tabs Reload paper if necessary page 6 then try again Make sure paper is not jammed Clear the jam if necessary page 36 then try again Paper runs out Supply mismatch can result from several different situations before the color including cartridge or vice Scrapping of paper as a result of jams or other errors versa Gradual advancement of the color cartridge ribbon as a result of removing ribbon slack or clearing jams Supply mismatch is likely to occur as you continue to use your printer dock If you wish to keep your cartridge and paper supply synchronized discard unused cartridge or paper when one or the other is fully depleted 40 N www kodak com go support Troubleshooting Transfer communication problems Try one or more of the following Not
52. t L 2 up up to two 2 1 x 3 3 in 54 x 85 mm pictures per sheet H 4 up up to four 2 x 3 in 51 x 76 mm pictures per sheet EH 9 up up to nine 1 3 x 2 in 34 x 51 mm pictures per sheet The selected picture size is indicated by its Picture Size light NOTE When printing trom a PictBridge compatible device see page 15 picture size and number of copies is determined by the device s multi up and copies settings Change these settings on your device before printing If the picture size option selected on your device does not match any of the picture size options on the printer dock the closest available picture size option on the printer dock is automatically selected 3 Continue changing other settings or begin printing To change the default picture size m Select a picture size see above then press and hold the Picture Size button for 4 seconds The selected Picture Size light blinks then glows steady Getting the best picture quality with picture size In general the larger the picture size the higher the image resolution that is needed to make a quality print The following table recommends picture size settings for different image resolutions For optimal picture quality in all sizes we recommend taking pictures using the Best 3 2 or similar setting on your digital camera See your camera user s guide for details Image resolution quality 0 3 MP setting on camera 0 8 MP up to Less than or greater 0 8 MP 0 3 MP
53. t technical 50 51 system reguirements computer 22 T tagging pictures for printing 11 telephone support 51 television using as display 20 transfer button light i 26 27 28 29 46 transferring pictures from camera to computer 26 from internal card reader 27 from Kodak card reader 28 from PictBridge compatible device 29 problems 41 traveling with printer dock 34 tray paper See paper tray troubleshooting printing 35 status light descriptions 42 transfer communication 41 uninstalling software 24 universal camera insert ii 1 removing 2 upgrading software amp firmware 50 53 URLs Kodak web sites 50 USB cable 14 15 25 28 29 connector to computer ii 25 device connector i 14 15 28 29 device connector light i 14 15 28 29 48 V VCCI compliance 55 vents cooling ii 33 38 40 viewing pictures See reviewing pictures W Windows OS installing software on 22 system requirements 22 uninstalling software 24 wireless printing 16 X XtraLife laminate coating 12 www kodak com go support
54. t Delete Canceling printing from the printer dock m Press the Cancel button XK on the printer dock The print job is canceled and ejected from the printer dock If you cancel a print during the fourth pass clear coat the paper is ejected upon completion 32 N www kodak com go support Care and maintenance General care Grd CAUTION Always disconnect the power before cleaning Do not use harsh or abrasive cleaners or organic solvents on the printer dock or any of its parts mTo clean wipe the outside of the printer dock with a clean dry cloth m Support the printer dock and tray by placing it on a flat level surface Do not block the cooling vents m Avoid blocking the back of the printer dock and paper tray exit m Keep power and USB cables away from the paper path m Keep the surrounding area vacuumed and litter free m Protect the printer dock from tobacco smoke dust sand and liquid spills m Avoid placing objects on the printer dock m Keep the printer dock accessories and supplies away from direct sunlight and out of high temperature environments such as a vehicle parked in the sun m When storing remove the paper tray then close the paper tray cover see page 6 and paper tray door to keep out dust and debris Store paper flat www kodak com go support CEN 33 Care and maintenance Cleaning the paper feed roller To prevent misfeeds and to make sure your pictures lo
55. ter List window click the Add Printer button d Select the printer dock then click Add The printer dock is added to your computer IMPORTANT When prompted take a few minutes to electronically register your printer dock and software This lets you receive information regarding software updates and registers some of the products included with the printer dock You must be connected to your Internet service provider to register electronically To register later visit www kodak com go register 5 Restart the computer if prompted If you turned off anti virus software turn it back on See the anti virus software manual for details For more information on installing the software see the ReadMe file on the Kodak EasyShare software CD For information on the software applications included on the Kodak EasyShare software CD click the Help button in the EasyShare software www kodak com go support CEN 23 Installing software Uninstalling the software If you wish to remove the printer driver or EasyShare software from your computer use the following procedure Windows OS based computer 1 Open the Control Panel From the Start menu select Settings then select Control Panel On Windows XP operating systems depending on your configuration Control Panel may be found in the Start menu 2 Double click Add Remove Programs 3 Select Kodak EasyShare software then click Remove 4 Select Modity to uninstall single compo
56. ting tagged pictures If your camera or memory card contains pictures tagged for printing see page 11 or your camera user s guide the printer dock gives you the option to print the tagged pictures first If your EasyShare camera is docked a message appears on the camera screen indicating that tagged pictures have been found m To print tagged pictures press L The Print light blinks printing starts and tagged pictures are printed Print tags are removed from tagged pictures on your camera or card as they are printed To bypass printing of tagged pictures press the Cancel button XK Printing from a PictBridge compatible device The Kodak EasyShare printer dock plus offers PictBridge technology which lets you communicate with any PictBridge compatible camera or device 1 Open the accessory door on the printer dock 2 Plug the USB connector from the PictBridge compatible device into the USB device connector located on the side of the printer dock The USB device connector light blinks while the printer dock reads the device then glows steady green NOTE If the PictBridge compatible device is already plugged in but the connection has timed out disconnect then reconnect the USB cable to re establish a connection 3 Use your PictBridge compatible device to review pictures choose printing options and print See your device user s guide for details www kodak com go support CEN 15 Printing without a computer
57. tridge amp paper kits for your printer dock Do not use inkjet paper 1 Remove the paper tray from the printer dock if installed see page 6 2 Slide the paper tray cover back until it clicks into place about 1 25 in 3 cm then lift up on the end of the paper tray cover IMPORTANT Do not load more than 25 sheets of paper Use the upper limit line inside the paper tray as a guide to prevent overloading Do not load paper that is missing perforated tabs To avoid fingerprints do not touch the glossy side of the paper 3 Carefully fan the paper to keep the sheets from sticking together 4 Load the paper into the paper tray with the Kodak logo side facing down 5 Close the paper tray cover Purchase Kodak color cartridge amp paper kits and other accessories at a retailer of Kodak products or visit www kodak com go accessories Installing and removing the paper tray 1 Open the paper tray door on the printer dock 2 Slide the paper tray cover back until it clicks into place about 1 25 in 3 cm 3 Slide the paper tray in the printer tray slot until the tray locks into place Pull the paper tray out to remove it 6 CN www kodak com go support Setting up your EasyShare digital camera The Kodak EasyShare printer dock plus is compatible with Kodak EasyShare CX DX6000 7000 series and LS600 700 series digital cameras sold separately Choosing the right camera battery Gd CAUTION
58. ts for Paper and or your printer dock Do not use inkjet paper Color cartridge If the Paper light is blinking quickly Ug ay uA 1 Remove the paper tray page 6 quickly 2 Unplug the AC power cord wait 5 seconds then plug it back in If the paper does not automatically eject carefully remove the paper manually IMPORTANT Always check the paper slot on the back of the printer dock for jammed paper PP UL 1 3 Remove the paper supply from the paper tray Carefully fan the paper to keep the sheets from sticking together 4 Reload the paper tray Do not exceed the fill line 5 Re install the paper tray then press L to resume printing m If the Color cartridge light is blinking quickly check the color cartridge IMPORTANT The color cartridge may lock in place if there is a paper error Do not attempt to remove the color cartridge without first clearing the paper error Make sure the Paper light is off before attempting to remove the color cartridge Remove the color cartridge remove any slack from the ribbon then re install the cartridge page 4 Press D to resume printing 36 N www kodak com go support Troubleshooting Try the following Printing stops IMPORTANT Use only Kodak color cartridge amp paper kits for during mid print your printer dock Do not use inkjet paper paper stops m Check the paper feeding and Paper light may blink Remove the paper tray page 6 Check the pap
59. vable tabs page 37 paper if necessary then press L The paper tray is empty Load paper page 6 then press L The paper tray is not installed or is Remove the paper tray check that improperly installed paper is properly loaded and re install page 6 Press D to resume printing Paper did not feed removable Check the paper supply Reload tabs may be missing or sheets may with new paper if necessary then be stuck together page 35 press D The paper feed roller may be dirty Clean the paper feed roller page 34 www kodak com go support CEN 43 Troubleshooting Battery charging lights Light status Action solution All lights are off The camera is not properly Reseat the camera on the seated on connector printer dock page 9 An unrecognized battery type Install a Kodak EasyShare is installed or no battery is Ni MH rechargeable battery installed pack or Kodak EasyShare Li lon rechargeable battery page 7 One steady green light The camera was just placed None the dock is checking on the dock the charge status of the battery Ascending steady green The battery is charging Leave the camera on the lights Charging is complete when dock to continue charging or all three lights are lit maintain the charge One blinking red light The battery is not properly _ Re install the battery in the C o installed camera The battery or connector pin Check for damage is damaged The

Kodak EasyShare Thermal Photo Printer

Contents

Download Pdf Manuals

Related Search

Related Contents