Dell P1130 Monitor
Contents
1. Dell P1130 Color Monitor Quick Setup Guide Safety Instructions Observe the following safety guidelines when connecting and using your monitor Be sure that your monitor is electrically rated to operate with the AC power available in your location Locate your monitor near an easily accessible electrical outlet Place the monitor on a solid surface and treat it carefully The screen can be damaged if dropped sharply hit or touched with a sharp or abrasive implement Put your monitor in a location with low humidity and a minimum of dust Never use your monitor if the power cable has been damaged Do not allow anything to rest on the power cable and keep the cable away from where people could trip over it Never insert anything metallic into the monitor openings Doing so may create the danger of electric shock To avoid electric shock never touch the inside of the monitor Only a qualified technician should open the monitor s case Be sure to hold the plug not the cable when disconnecting the monitor from an electrical outlet Openings in the monitor cabinet are provided for ventilation To prevent overheating these openings should not be blocked or covered Also avoid using the monitor on a bed sofa rug or other soft surface Doing so may block the ventilation openings in the bottom of the cabinet If you put the monitor in a bookcase or some other enclosed space be sure to provide adequate ventilation Do not expose the mon2. regarding your monitor is contained in the User s Guide on your CD Dell P1130 Color Monitor Quick Setup Guide 3 4 Troubleshooting Tips Monitor Has No Power If the monitor s power indicator is off and no image appears on the display perform the following checks Ensure that the power cable is fully inserted in the monitor s power port and the electrical outlet Test the electrical outlet by plugging in a working electrical device such as a lamp Ensure that the power button has been depressed and wait for the power indicator to light Try another power cable on the monitor Use the computer s power cable and turn on the monitor with the signal cable disconnected If the monitor is working correctly a self test pattern appears No Image Is Displayed on the Monitor If the monitor power indicator is on but no image appears on the display perform the following checks Ensure that the video connector is seated properly Tighten the connector screws securely with your fingers Ensure that the computer is on Increase brightness and contrast controls Turn off the monitor and unplug the signal cable Check the cable connector for bent or broken pins With the signal cable still disconnected turn on the monitor If the monitor is working correctly a self test pattern appears e Perform a monitor reset or recall IMPORTANT Before contacting Dell for technical assistance refer to the Troubleshooting section in the User s Gui
3. de on your monitor CD This section contains detailed information for resolving most monitor problems Information in this document is subject to change without notice 2001 Dell Computer Corporation All rights reserved Reproduction in any manner whatsoever without the written permission of Dell Computer Corporation is strictly forbidden Trademarks used in this text Dell and the DELL logo are trademarks of Dell Computer Corporation Microsoft and Windows are registered trademarks of Microsoft Corporation Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products Dell Computer Corporation disclaims any proprietary interest in trademarks and trade names other than its own October 2001 Dell P1130 Color Monitor Quick Setup Guide
4. isplay Properties window Dell P1130 Color Monitor Quick Setup Guide Microsoft Windows 2000 Operating System To manually install or update the driver perform the following steps 1 Click Start gt Settings gt Control Panel and then double click Display 2 Inthe Display Properties window click the Settings tab and then click Advanced 3 Click the Monitor tab and then click Properties gt Driver gt Update Driver 4 When the Update Device Driver Wizard dialog box appears choose Search for a suitable driver for my device and click Next gt 5 Insert the monitor CD into the CD ROM drive type d change the drive letter to match your CD ROM drive if it is not drive D in the Copy manufacturer s files from box and click Next gt and then Finish to complete the installation 6 Close the Display Properties window Microsoft Windows 98 Operating System Windows 98 automatically detects the new monitor and displays the Add New Hardware Wizard dialog box if the monitor driver is not already installed 1 Insert the monitor CD into the CD ROM drive and click Next gt twice when the Add New Hardware Wizard dialog box appears 2 Click the CD ROM drive box to install the drivers from the CD and then click Next gt 3 Confirm that the driver was found on the CD and click Next gt twice to install the driver 4 Click Finish to exit the Add New Hardware Wizard dialog box To manually install or update
5. itor to rain or use it near water If the monitor accidentally gets wet unplug it and contact an authorized dealer immediately You can clean the exterior of the monitor with a damp cloth when necessary but be sure to unplug the monitor first If your monitor does not operate normally in particular if there are any unusual sounds or smells coming from it unplug the monitor immediately and contact an authorized dealer or service center Quick Specifications AC input voltage frequency 100 240 V 50 60 Hz Current 1 6 A RMS at 120 VAC and 0 9 A RMS at 220 VAC Operating Temperature 0 to 40 C 82 to 104 F Dimensions 502 mm x 497 mm x 485 mm height x width x depth 19 8 x 19 6 x 19 1 inches Weight monitor only 30 5 kg 67 Ibs 4 oz Other accessory items in the package CD ROM User s Guide AC Cord video signal cable Connecting Your Monitor to a Computer NIE Elfai Turn off your computer s and unplug its power cable s Connect your first computer to video input 1 HD15 using the supplied HD15 video signal cable If you have a second computer connect It to video input 2 HD15 using another HD15 video signal cable not supplied Connect the other end s of the HD15 video signal cable s to the video output s of your computer s Connect the power cable for your monitor to the po
6. or update the driver perform the following steps ee YS Insert the monitor CD into the CD ROM drive Click Start gt Control Panel gt Appearance amp Themes and then click the Display icon In the Display Properties window click the Settings tab and then click Advanced Click the Monitor tab and then click Properties gt Driver tab gt Update Driver When the Hardware Update Wizard dialog box appears choose Install the software automatically and click Next gt and the Finish to complete the installation Close the Display Properties window Microsoft Windows Millennium Operating System To manually install or update the driver perform the following steps 1 2 3 4 o Click Start gt Settings gt Control Panel and then double click Display In the Display Properties window click the Settings tab and then click Advanced Click the Monitor tab and then click Change gt Specify the location of the driver gt Next When the Update Device Driver Wizard dialog box appears select Display a list of all the drivers in a specific location so you can select the driver you want and click Next gt Insert the monitor CD into the CD ROM drive then click Have Disk Type d change the drive letter to match your CD ROM drive if it is not drive D in the Copy manufacturer s files from box then click OK Click Next gt Next gt and then Finish to complete the installation Close the D
7. the driver perform the following steps 1 Click Start gt Settings gt Control Panel and then double click Display In the Display Properties window click the Settings tab and then click Advanced Click the Monitor tab and then click Change When the Update Device Driver Wizard dialog box appears follow the steps in the previous paragraph haa aed had Setting Display Resolution For optimal monitor performance while using Microsoft Windows XP Windows 2000 Windows 98 or Windows NT set the display resolution to 1280 x 1024 as follows 1 Click Start gt Settings gt Control Panel 2 Double click the Display icon in the Control Panel window and the click the Settings tab 3 Inthe Desktop area move the slidebar to 1280 x 1024 pixels Then click OK Accessing the User s Guide Online or via CD To view the latest monitor User s Guide access the SUPPORT section of the Dell Web site http support dell com If you do not have Internet access you can access the guide on the monitor CD 1 Insert the monitor CD into your CD ROM drive A start up document should launch automatically however if the start up document does not launch automatically click Start gt Run type D monitor htm and click OK Substitute the correct CD ROM drive letter if it is not the D drive 2 Click the appropriate icon to open the User s Guide in the desired language NOTE All applicable warranty and regulatory information
8. wer port on the back of the monitor Plug the power cables of your computer s and your monitor into a nearby outlet Turn on your monitor and computer s If the monitor does not display an image refer to the troubleshooting section of this guide Dell P1130 Color Monitor Quick Setup Guide 1 2 ZA J Monitor Controls and Indicators kl lo e These buttons are used to make adjustments to the monitor in the desired menu items These buttons display the CONTRAST BRIGHT lt menu These buttons are also used to navigate the menu This button is used to display the main menu on your screen This button is also used to select the menu items and to activate the adjustment This button selects the INPUT 1 video input 1 connector 1 or INPUT 2 video input 2 connector C2 video input signal This button switches the power on and off The LED indicator lights up in green when the monitor is turned on and lights up in amber when the monitor is in power saving mode If the monitor is in the power save mode and the power is turned off with the power switch it may take up to 10 seconds for the LED to go black Driver Installation Use the monitor CD to install the appropriate monitor driver for your operating system The following OS messages might be slightly different from the actual message that appears on your PC but the meaning is the same Microsoft Windows XP Operating System To manually install
Download Pdf Manuals
Related Search