Sony STR-DG520 Receiver
Contents
1. 1 DIGITAL INPUT OUTPUT section peyeys Buma 9 i FRONT SPEAKERS mcoance use 160 3 SPEAKERS section OPTICAL Connects toa DVD fel IN jacks player etc The COAXIAL jack COAXIAL IN provides a better jack sound quality page 17 20 22 D HDMI IN Connects toa DVD OUT jacks player or a Blu ray disc player The image and the sound are output to a TV page 17 2 COMPONENT VIDEO INPUT OUTPUT section COMPONENT a VIDEO INPUT Blue OUTPUT Ps Cs jacks Or Connects toa DVD player TV ora satellite tuner You can enjoy high quality image page 19 20 22 Connects to speakers page 14 4 VIDEO AUDIO INPUT OUTPUT section AUDIO IN Connects to video White L OUT jacks and audio jacks of a VCR a DVD Red R player etc page 19 23 VIDEO IN Yelow our jacks 5 AUDIO INPUT section Connects to a Super Audio CD player CD player etc page 15 AUDIO IN White L jacks Red R AUDIO OUT jack Connects to a sub woofer page 14 Black continued gus 6 ANTENNA section FM ANTENNA Connects to the FM wire antenna jack aerial supplied with this receiver page 24 AM Connects to the AM ANTENNA loop antenna terminals aerial supplied with this receiver page 24 DMPORT DMPORT jack Connects t2. Dolby Pro Logic and the double D symbol are trademarks of Dolby Laboratories Manufactured under license under U S Patent s 5 451 942 5 956 674 5 974 380 5 978 762 6 487 535 amp other U S and worldwide patents issued amp pending DTS and DTS Digital Surround are registered trademarks and the DTS logos and Symbol are trademarks of DTS Inc 1996 2007 DTS Inc All Rights Reserved This receiver incorporates High Definition Multimedia Interface HDMI technology HDMI the HDMI logo and High Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC ous Table of Contents Getting Started Description and location of parts 5 1 Installing speakers 0 0 0 0 eee 2 Connecting speakers 3a Connecting the audio components 15 3b Connecting the video components 16 4 Connecting the antennas aerials 24 5 Preparing the receiver and the remote 25 6 Adjusting the speaker levels and balance TEST TONE eee 26 Playback Selecting a component cece 28 Listening Watching a component 29 Amplifier Operations Navigating through menus cee 31 Adjusting the level LEVEL menu 34 Adjusting the tone TONE menv 35 Settings for the surround sound SUR MON sce rren AEE 35 Settings for the tuner TUNER menv 36 Settings for the audio AUDIO menv 36 Set
3. 2708 peyeys Buma 9 7 Playback Selecting a component TV INPUT wiv i DmporT avi VQ SYSTEM STANDBY BD DVD SAT OOOO 4 TV SA CD CD TUNER AF D MOVIE MUSIC eee D TUNING gt 10 MEMORY AMP MENU CLEAR TOOLS DISPLAY OPTIONS MUTING MUTING 3 1 Press the input button to select a component You can also use INPUT SELECTOR on the receiver The selected input appears on the display 28 US Selected input Components that can Display be played back VIDEO VCR etc connected to VIDEO the VIDEO jack BD Blu ray disc player etc BD connected to the BD jack DVD DVD player etc DVD connected to the DVD jack SAT Satellite tuner etc SAT connected to the SAT jack TV TV etc connected to the TV TV jack SA CD CD Super Audio CD CD SA CD CD player etc connected to the SA CD CD jack TUNER Built in radio tuner FM or AM band DMPORT DIGITAL MEDIA PORT DMPORT adapter connected to DMPORT jack 2 Turn on the component and start playback 3 Press MASTER VOL to adjust the volume You can also use MASTER VOLUME on the receiver To activate the muting function Press MUTING The muting function will be canceled when you do the following e Press MUTING again e Increase the volume Turn off the receiver To avoid damaging your speakers Before you turn off the receiver be sure to turn down the volum
4. OTAMAK a Q Coaxial digital cord not supplied Video cord not supplied Component video cord not supplied 20 US OUTPUT COMPONENT VIDEO Ps CB PR CR SPEAKERS IMPEDANCE USE 8160 Connecting a DVD recorder DVD recorder Video signals Audio signals INPUT OUTPUT RS IMPEDANCE USE 8160 Video cord not supplied Audio cord not supplied Notes e Be sure to change the factory setting of the VIDEO input button on the remote so that you can use the button to control your DVD recorder For details see Changing button assignments page 54 e You can also rename the VIDEO input so that it can be displayed on the receiver s display For details see Naming inputs page 52 21s paeyeys buije5 c lli Notes onnecting a sate ite tuner e When connecting optical digital cords insert the set top box plugs straight in until they click into place e Do not bend or tie optical digital cords The following illustration shows how to connect a satellite tuner or a set top box It is not necessary to connect all the cords Connect audio and video cords according to the jacks of your components Before connecting cords make sure to disconnect the AC power cord
5. Refer to page 40 for details Recommended sound fields Movie C ST EX Music CONCERT 30 US Go N O O1 Turn on the TV and DVD player or Blu ray disc player Turn on the receiver Press DVD or BD You can also use INPUT SELECTOR on this receiver to select DVD or BD Switch the input of the TV so that an image of the DVD or Blu ray disc is displayed Play back the disc Adjust to a suitable volume After you have finished watching the DVD or Blu ray disc eject the disc and turn off the receiver TV and DVD player or Blu ray disc player To return to the previous display Amplifier Operations Press Navigating through To exit the menu Press AMP MENU menus Note Some parameters and settings may appear dimmed on the display This means that they are either unavailable or fixed and unchangeable By using the amplifier menus you can make various adjustments to customize the receiver D TUNING gt 10 MEMORY AMP MENU TH mE 1 CLEAR TOOLS DISPLAY OPTIONS lop MASTER VoL 2E RETURNEXIT senor TV CH PRESET REPLAY ADVANCE PRESET T Press AMP MENU 1 LEVEL appears on the display Press repeatedly to select the menu you want Press or to enter the menu A N Press repeatedly to select the parameter you want to adjust ol Press or to enter the parameter 6
6. mains lead Tip All the digital audio jacks are compatible with 32 kHz 44 1 kHz 48 kHz and 96 kHz sampling frequencies Satellite tuner set top box Audio signals Video signals OUTPUT COMPONENT VIDEO Y PB CB PR CR OPTICAL SPEAKERS wrepance use s4162 Audio cord not supplied Optical digital cord not supplied Video cord not supplied Component video cord not supplied 220s Before connecting cords make sure to Connecting components with disconnect the AC power cord mains lead Ea analog video and audio jack The following illustration shows how to connect a component which has analog jacks such as a VCR etc It is not necessary to connect all the cords Connect audio and video cords according to the jacks of your components peyeys buije5 Video signals Audio signals INPUT OUTPUT eo YP po W of ERS inpepance use 8460 S Video cord not supplied Audio cord not supplied 23us 4 Connecting the antennas aerials Connect the supplied AM loop antenna aerial and FM wire antenna aerial Before connecting the antennas make sure to disconnect
7. Press repeatedly to select the setting you want The setting is entered automatically 314s suoneado Jajduy Overview of the menus The following options are available in each menu For details on navigating through menus see page 31 Menu Parameters Settings Initial Display Display setting LEVEL Test tone T TONE T TONE N T TONE Y T TONE N ee Front speaker balance BAL L 1 to BAL L 8 BALANCE BALANCE pag FRT BAL BAL R 1 to BAL R 8 Center speaker level CNT 10 dB to CNT 10 dB CNT 0 dB CNT LVL 1 dB step Surround left speaker level SUR L 10 dB to SUR L 10 dB SUR L 0 dB SL LVL 1 dB step Surround right speaker level SUR R 10 dB to SUR R 10 dB SUR R 0 dB SR LVL 1 dB step Sub woofer level SW 10 dB to SW 10 dB SW 0 dB SW LVL 1 dB step Dynamic range compressor COMP OFF COMP STD COMP OFF D RANGE COMP MAX TONE Front speaker bass level BASS 6 dB to BASS 6 dB BASS 0 dB 2 TONE BASS LVL 1 dB step page 35 Front speaker treble level TRE 6 dB to TRE 6 dB TRE 0 dB TRE LVL 1 dB step SUR Sound field selection For details see Enjoying Surround A F D AUTO 3 SUR S F SELCT Sound page 40 for page 35 VIDEO BD DVD SAT 2CH ST for TV SA CD CD TUNER DMPORT Effect level EFFECT EFCT MIN EFCT STD EFCT STD EFCT MAX TUNER FM station receiving mode FM AUTO FM MONO FM AUTO 4 TUNER
8. activate the TV s muting function Audio signals Video signals ADO AUDIO our N Q Audio cord not supplied Video cord not supplied Component video cord not supplied SAIN VON CENTER SPEAKERS IMPEDANCE use 8462 190s peyeys buie5 Connecting a DVD player DVD recorder The following illustration shows how to connect a DVD player DVD recorder It is not necessary to connect all the cords Connect audio and video cords according to the jacks of your components Before connecting cords make sure to disconnect the AC power cord mains lead Connecting a DVD player DVD player Notes e To input multi channel digital audio from the DVD player set the digital audio output setting on the DVD player Refer to the operating instructions supplied with the DVD player e As this receiver does not have analog audio input jacks for DVD connect your DVD player to the DIGITAL COAXIAL DVD IN jack on the receiver To output sound from the front left right speakers only press 2CH Tip All the digital audio jacks are compatible with 32 kHz 44 1 kHz 48 kHz and 96 kHz sampling frequencies Audio signals Video signals DIN BD IN our em a e DIGITAL OPTICAL E gda COAXIAL DMPORT DCsy
9. same time to activate 2 vd Press to turn the receiver on or the TV smuting function on standby off 11 TV VOL Press TV VOL and TV To turn off all components 3 13 at the same time to adjust press 1 and AV 1 1 at the TV volume level the same time SYSTEM STANDBY MASTER Press to adjust the volume VOL level of all speakers at the 3 Input buttons Press one of the buttons to same time select the component you b g 7 want to use When you press 12 kea gt gt i Press to skip a track of the CD any of the input buttons the player DVD player or Blu receiver turns on The buttons ray disc player are factory assigned to control REPLAY Press to replay the previous Sony components ADVANCE scene or fast forward the You can change the button current scene of the VCR assignments following the DVD player or Blu ray disc steps in Changing button player assignments on page 54 b qah Press to 4 2CH Press to select a sound field search tracks in the forward AED reverse direction of the DVD player MOVIE start fast forward rewind of Music the VCR CD player or Blu ray disc player 5 DVD BD Preas to display te Dk o rab Press to start playback of the MENU the DVD or Blu ray disc on VCR CD pl DVD pl the TV screen Then use Bh f PERAN prayer gt and i6l to perform or Blu ray disc player menu operations ph Press to pause playback or 6 D SKIP Press to skip a disc when reco
10. the AC power cord mains lead FM wire antenna aerial supplied AM loop antenna aerial supplied DVDN BDI IN OUT DIGITAL OPTICAL SAN OVON MONITOR OUT CENTER SPEAKERS mPevance use 8 160 The shape of the connector varies depending on the area code of this receiver Notes e To prevent noise pickup keep the AM loop antenna aerial away from the receiver and other components e Be sure to fully extend the FM wire antenna aerial e After connecting the FM wire antenna aerial keep it as horizontal as possible 24us 5 Preparing the receiver and the remote Connecting the AC power cord mains lead Connect the AC power cord mains lead to a wall outlet Notes e Before connecting the AC power cord mains lead make sure that the stripped end of the speaker cords are not touching each other between the speaker terminals e Connect the AC power cord mains lead firmly AC power cord mains lead gt To the wall outlet Performing initial setup operations Before using the receiver for the first time initialize the receiver by performing the following procedure This procedure can also be used to return settings you have made to their factory defaults Be sure to use the buttons on the receiver for this operation 1 Press 1 to turn off the rec
11. types of components Refer to the operating instructions of each component connected for details Notes Be sure to turn on the receiver when the video and audio signals of a playback component are being output to a TV via the receiver Unless the power is turned on neither video nor audio signals will be transmitted When connecting optical digital cords insert the plugs straight in until they click into place Do not bend or tie optical digital cords Tip All the digital audio jacks are compatible with 32 kHz 44 1 kHz 48 kHz and 96 kHz sampling frequencies 18us Connecting a TV The image from a video component connected to this receiver can be displayed on a TV screen It is not necessary to connect all the cords Connect audio and video cords according to the jacks of your components Before connecting cords make sure to disconnect the AC power cord mains lead Note Be sure to turn on the receiver when the video and Ea audio signals of a playback component are being output to a TV via the receiver Unless the power is turned on neither video nor audio signals will be transmitted Tips e You can watch the selected input image when you connect the MONITOR OUT or HDMI OUT jack to a TV or projector e To output the sound of the TV from the speakers connected to the receiver be sure to connect the audio output jacks of the TV to the TV AUDIO IN jacks of the receiver turn off TV s volume or
12. FM MODE page 36 Naming preset stations NAME IN For details see Naming preset stations page 49 32us
13. S O N Y 3 284 083 11 1 Multi Channel AV Receiver Operating Instructions STR DG520 2008 Sony Corporation Owner s Record The model and serial numbers are located on the rear of the unit Record the serial number in the space provided below Refer to them whenever you call upon your Sony dealer regarding this product Model No Serial No To reduce the risk of fire or electric shock do not expose this apparatus to rain or moisture To prevent fire do not cover the ventilation of the apparatus with newspapers table cloths curtains etc And don t place lighted candles on the apparatus To prevent fire or shock hazard do not place objects filled with liquids such as vases on the apparatus Do not install the appliance in a confined space such as a bookcase or built in cabinet Install this system so that the power cord can be unplugged from the wall socket immediately in the event of trouble Batteries or batteries installed apparatus shall not be exposed to excessive heat such as sunshine fire or the like For customers in the United States RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER OR BACK NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL This symbol is intended to alert the user to the presence of uninsulated dangerous voltage within the product s enclosure that may be
14. ad DVD player Blu ray disc player TV etc Audio Audio video Audio Audio video Audio video signals signals signals signals signals OUTPUT INPUT OPTICAL N COAXIAL DMPORT l Desy i OTANAK FRONT ys SPEAKERS impepance use s462 Q Coaxial digital cord not supplied HDMI cable not supplied We recommend that you use a Sony HDMI cable Optical digital cord not supplied continued 17us peyeys Buma Notes on HDMI connections The sound is output from the TV speaker only when a playback component and this receiver as well as this receiver and the TV are connected via the HDMI jack To output the sound from the speakers and to take advantage of the multi channel surround sound be sure to connect the digital audio jacks on the playback component to the receiver turn off TV s volume or activate the TV s muting function The multi stereo area audio signals of a Super Audio CD are not output Video signals input to the HDMI IN jack can only be output from the HDMI OUT jack The input video signals cannot be output from the VIDEO OUT jacks or MONITOR OUT jacks Check the setup of the connected component if an image is poor or the sound does not come out of a component connected via the HDMI cable This receiver may not be able to transfer video or audio signals with certain
15. e level Listening Watching a component Listening to a Super Audio CD CD Notes The operation is described for a Sony Super Audio CD player e Refer to the operating instructions supplied with the Super Audio CD player or CD player Tip You can select the sound field to suit the music Refer to page 40 for details Recommended sound fields Classical HALL Jazz JAZZ Live concert CONCERT G N o1 A yoeqhe d Turn on the Super Audio CD player CD player then place the disc on the tray Turn on the receiver Press SA CD CD You can also use INPUT SELECTOR on the receiver to select SA CD CD Play back the disc Adjust to a suitable volume After you have finished listening to the Super Audio CD CD eject the disc and turn off the receiver and Super Audio CD player CD player 2gus Watching a DVD Blu ray disc Notes e Refer to the operating instructions supplied with the TV and DVD player or Blu ray disc player e Check the following if you cannot listen to multi channel sound Be sure this receiver is connected to the DVD player or Blu ray disc player via a digital connection Be sure the digital audio output of the DVD player or Blu ray disc player is set up properly Tips e Select the sound format of the disc to be played if necessary e You can select the sound field to suit the movie music
16. eft EjFront speaker right Center speaker D Surround speaker left H Surround speaker right Sub woofer Tip Since the sub woofer does not emit highly directional signals you can place it wherever you want 1305 peyeys buiyje5 2 Connecting speakers Before connecting cords make sure to disconnect the AC power cord mains lead E ONT CENTER OME 19 32 in 10 mm P Monaural audio cord not supplied Speaker cords not supplied BNFront speaker left When you connect a sub woofer with an auto Ej Front speaker right standby function turn off the function when Center speaker watching movies If the auto standby function is D set to on it turns to standby mode automatically Surround speaker left based on the level of the input signal to a sub HSurround speaker right woofer then sound may not be output Isuo woofer Note You can turn on or off the speaker system with the SPEAKERS ON OFF button page 5 140s 3a Connecting the audio components Before connecting cords make sure to disconnect Connecting a Super Audio CD the AC power cord mains lead CD player The following illustration shows how to connect a Super Audio CD CD player After connecting your Super Audio CD CD player proceed to 3b Connecting the video components
17. eiver 2 Hold down I for 5 seconds PUSH and ENTER appears on the display alternately 3 Press MEMORY ENTER After CLEARING appears on the display for a while CLEARED appears All the settings you have changed or adjusted are reset to the initial settings 25058 peyeys Buma 9 Inserting batteries into the remote Insert two R6 size AA batteries in the RM AAU020 Remote Commander Observe the correct polarity when installing batteries Notes e Do not leave the remote in an extremely hot or humid place e Do not use a new battery with old ones e Do not mix manganese batteries and other kinds of batteries e Do not expose the remote sensor to direct sunlight or lighting apparatuses Doing so may cause a malfunction If you do not intend to use the remote for an extended period of time remove the batteries to avoid possible damage from battery leakage and corrosion e When you replace the batteries the remote buttons may be reset to their factory settings If this happens reassign the buttons again page 54 Tip Under normal conditions the batteries should last for about 3 months When the remote no longer operates the receiver replace all the batteries with new ones 26 US 6 Adjusting the speaker levels and balance TEST TONE You can adjust the speaker levels and balance while listening to the test tone from your listening position Tip The receiver employs a t
18. en sub woofer 5 OPT Lights up when BD input is selection is set to YES page selected However 37 and the audio signal is UNLOCK appears on the output from the SUB display if no digital signal is WOOFER jack input through the OPTICAL 2 LFE Lights up when the disc being Jack OPa alio lights on when SAT input is selected if played back contains an LFE INPUT MODE is set to Low Frequency Effect AUTO and the source signal channel and the LFE channel s Pia i nal is actually bei is a digital signal being input PAPPAN P AAY Deane through the OPTICAL jack reproduced 3 DOD Lights up when the receiver is 6 DTS Tights up when me cramer oo decoding DTS signals decoding Dolby Digital Note ies When playing a DTS format Pe F ay disc be sure that you have When playing a Dolby Digital ra a f tdisc b that made digital connections and Shara RRR O that INPUT MODE is set to have made digital connections AUTO page 50 and that INPUT MODE is set Sa cae to AUTO page 50 7 MEMORY Lights up when a memory 4 oo PL D0 PL lights up when the sanction eh as Biesse i Memory page 48 etc is OO PLII receiver applies Pro Logic a p activated processing to 2 channel signals in order to output the center and 8j Tuner Lights up when using the surround channel signals indicators receiver to tune in radio OO PLII lights up when the stations page 46 etc A Logit E Evie 9 Preset Lights up w
19. est tone with a frequency centered at 800 Hz wid SLEEP fomporT avi VO SYSTEM STANDBY VIDEO BD DVD SAT Input TV SA CD CD TUNER buttons 2CH A D MOVIE MUSIC EF D TUNING gt 10 MEMORY AMP MENU Thwm es d TOOLS MASTER VOL MENU HOM RETURNIEXIT T Press AMP MENU 1 LEVEL appears on the display Press or to enter the menu Press repeatedly to select T TONE N Press or to enter the parameter 5 Press repeatedly to select T TONE Y The test tone is output from each speaker in sequence as follows Front left Center Front right gt Surround right Surround left gt Sub woofer 6 Adjust the speaker levels and balance using the LEVEL menu so that the level of the test tone sounds the same from each speaker For details see Adjusting the level LEVEL menu page 34 Tips To adjust the level of all speakers at the same time press MASTER VOL You can also use MASTER VOLUME on the receiver The adjusted value is shown on the display during adjustment 7 Repeat steps 1 to 5 to select T TONE N You can also press any input buttons The test tone turns off When a test tone is not output from the speakers The speaker cords may not be connected securely e The speaker cords may have the short circuit problem Note The test tone does not work when ANALOG DIRECT is selected
20. he same time to display 14 MENU HOME Press to display the menu of TV s information on the TV the VCR DVD player screen satellite tuner or Blu ray disc player on the TV screen 18 TOOLS Press to display and select the Press MENU HOME and TV OPTIONS options of the DVD player or 13 at the same time to Blu ray disc player display the TV s menu Press TOOLS OPTIONS and Then use gt and TV 13 at the same time to 16 to perform menu display options applicable to operations the Sony TV 15 RETURN Press to 19 Press to select the channel EXIT gt return to the previous menu entry mode either one or two exit the menu while the digit of the VCR menu or on screen guide of Press and TV 13 at the the VCR DVD player same time to select the satellite tuner or Blu ray disc channel entry mode either player is displayed on the one or two digits of the TV TV screen gt 10 Press to select Press RETURN EXIT 4 and track numbers over 10 of the TV 113 at the same time to VCR satellite tuner or CD return to the previous menu or player exit the TV s menu while the channel numbers of the menu is displayed on the TV Digital CATV terminal screen CLEAR Press to clear a mistake when 12us you press the incorrect numeric button Name Function 20 Numeric Press to buttons preset tune to preset number 5 stations select track numbers of the CD player DVD pla
21. hen using the decoder is activated Z ar station receiver to tune in radio However these indicators do Cae A indicators stations you have preset For not light up if both the center details on presetting radio and surround speakers are set to tati 47 NO page 33 and you select AOT PAE a sound field using the A F D 10 D RANGE Lights up when dynamic range button compression is activated page 32 continued Tus Name Function COAX Lights up when DVD input is selected However UNLOCK appears on the display if no digital signal is input through the COAXIAL jack HDMI Lights up when the receiver recognizes a component connected via a HDMI IN jack page 17 Playback channel indicators nNAnNnNODr Dr The letters L C R etc indicate the channels being played back The boxes around the letters vary to show how the receiver downmixes the source sound based on the speaker settings Front Left Front Right Center monaural Surround Left Surround Right Surround monaural or the surround components obtained by Pro Logic processing Example Recording format Front Surround 3 2 1 Output channel When surround speakers are set to NO page 33 Sound Field A F D AUTO SWJ LJ CJ R SL SR gus Rear panel DMPORT Ipa
22. o a DIGITAL MEDIA PORT adapter page 51 You can watch the selected input image when you connect the HDMI OUT or MONITOR OUT jack to a TV or projector page 17 19 104s Remote commander You can use the supplied remote to operate the receiver and to control the Sony audio video components that the remote is assigned to operate page 54 RM AAU020 Name Function Name Function m ft Ty Press TV VQ and TV 13 at 8 AMP MENU Press to display the menu of play on standby the same time to turn the TV the receiver Then use Q on or off gt and 16 to perform 2 AV Press to turn on or off the ee a on standby Sony audio video components 9 MEMORY Press to store a station Y that the remote is assigned to ENTER Press to enter the value after z operate page 54 lecti h l di o If you press VC 2 at the eens Channa cee Q eer track using the numeric same time it will turn off the buttons of the TV VCR or receiver and other Tlite t components SYSTEM oe STANDBY 10 MUTING Press to turn off the sound Note temporarily The function of the AV VW Press MUTING again to switch changes automatically restore the sound each time you press the input Press MUTING and TV 13 buttons 3 at the
23. of sufficient magnitude to constitute a risk of electric shock to persons Qus This symbol is intended to alert the user to the presence of important operating and maintenance servicing instructions in the literature accompanying the appliance WARNING This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help CAUTION You are cautioned that any changes or modification not expressly approved in this manual could void yo
24. page 16 or 4 Connecting the antennas aerials page 24 Super Audio CD player CD player DVD IN BDIN OUT EO f VIDEO VIDEO N OT N FRONT L OO SPEAKERS IMPEDANCE use 8461 Q Audio cord not supplied 150s peyeys buije5 3b Connecting the video components How to connect your components This section describes how to connect your video components to this receiver Before you begin refer to Component to be connected below for the pages which describe how to connect each component After connecting all your components proceed to 4 Connecting the antennas aerials page 24 Component to be connected Component Page With HDMI jack 17 TV 19 DVD player DVD recorder 20 Satellite tuner Set top box 22 VCR 23 1645 Video input output jacks to be connected The image quality depends on the connecting jack Refer to the illustration that follows Select the connection according to the jacks on your components COMPONENT VIDEO Digital High quality image Analog Connecting components with HDMI jacks HDMI is the abbreviated name for High Definition Multimedia Interface It is an interface which transmits video and audio signals in digital format Before connecting cables make sure to disconnect the AC power cord mains le
25. rding ot the VER CD ar player DVD player or Blu using a multi disc changer f ray disc player Also starts 7 D TUNING Press to enter direct tuning recording with components in mode recording standby continued 114s Name Function Name Function mh Press to stop playback of the 16 After pressing DVD BD VCR CD player DVD player d MENU 5 AMP MENU or Blu ray disc player 4 e gt 18 or MENU HOME 14 FM MODE Press to select the FM press eor to select Mg settings Then press G to monaural or stereo reception wats enter the selection if you have TV CH Press TV CH and TV f3 pressed DVD BD MENU or at the same time to select MENU HOME previously preset TV channels Press also to enter the selection of the receiver PRESET Press to select VCR satellite tuner CD preset stations player DVD player or Blu preset channels of the VCR ray disc player or satellite tuner A i7 DISPLAY Press to select information TUNING Press to scan a station displayed on the TV screen of 13 TV Press TV and the button you the VCR satellite tuner CD want at the same time to player DVD player or Blu activate the buttons with ray disc player orange printing Press DISPLAY and TV 13 at t
26. standby or off page 25 29 30 45 VOLUME level of all speakers at the 62 same time page 27 28 29 2 SPEAKERS Press to turn the speaker 0 ON OFF system on or off page 14 8 MUTING Press to turn off the sound yi pag 3 Display The current status of the EBI ia anie selected component or a list h d 8 28 of selectable items appears estore the sound page 28 here page 7 9 ANALOG Press to listen to high quality 4 Remote Receives signals from remote DIRECT analog sound page 5 sensor commander 10 INPUT Turn to select the input 5 DISPLAY Press to select information SELECTOR ee yee pees ay displayed on the display 54 a page 53 i 6 INPUT MODE Press to select the input mode 11 2CH o vi aspina tielu when the same components A F D pag are connected to both digital and analog jacks page 50 MOVIE MUSIC continued Bus Name Function 12 MEMORY Press to operate the tuner ENTER FM AM page 46 TUNING MODE TUNING 13 PHONES jack Connects to headphones page 58 gus About the indicators on the display ama P 1 2 3 4 5 6 7 8 amp ts ui al a g LFE DoD OOPL DOPL OPT DTS 2 OND Qa 11 10 9 Name Function Name Function 1 sw Lights up wh
27. tings for the system SYSTEM menu 37 Enjoying Surround Sound Enjoying Dolby Digital and DTS Surround sound AUTO FORMAT DIRECT 40 Selecting a pre programmed sound field 42 Using only the front speakers Q CH STEREO si ecscasitintiiaiactin 44 Listening to the sound without any adjustment ANALOG DIRECT 45 Resetting sound fields to the initial SENES ushee aero ea ahaa teenie 45 qus Tuner Operations Listening to FM AM radio eee 46 Presetting radio stations Other Operations Switching between digital and analog audio INPUT MODE ec eeeeeeeteeeeeeeees 50 Enjoying the DIGITAL MEDIA PORT DMPOR T aserra 50 Naming inp tss onig nenien 52 Changing the display oes 53 Using the Sleep Timer D3 Recording using the receiver 54 Using the Remote Changing button assignments 54 Additional Information GOSSA E N Naira eee 55 Precautions 37 Troubleshooting c eee eeeeeeeeeseeeeees 58 Specifications 0 cece eeseeeseecseeeeeeeeees 61 ING OX Sites te ees eR NR Re 63 Getting Started Description and location of parts Front panel peyeys buiye5 AFD move music 0 Name Function Name Function E vd Press to turn the receiver on 7 MASTER Turn to adjust the volume on
28. ur authority to operate this equipment Note to CATV system installer This reminder is provided to call CATV system installer s attention to Article 820 40 of the NEC that provides guidelines for proper grounding and in particular specifies that the cable ground shall be connected to the grounding system of the building as close to the point of cable entry as practical a About This Manual The instructions in this manual are for model STR DG520 Check your model number by looking at the lower right corner of the front panel In this manual models of area code U is used for illustration purposes unless stated otherwise Any difference in operation is clearly indicated in the text for example Models of area code U only e The instructions in this manual describe the controls on the supplied remote You can also use the controls on the receiver if they have the same or similar names as those on the remote About area codes The area code of the receiver you purchased is shown on the lower right portion of the rear panel see the illustration below 3 XXX XXX XX AA oS Area code Any differences in operation according to the area code are clearly indicated in the text for example Models of area code AA only This receiver incorporates Dolby Digital and Pro Logic Surround and the DTS Digital Surround System Manufactured under license from Dolby Laboratories
29. yer or Blu ray disc player Press 0 10 to select track number 10 select channel numbers of the VCR or satellite tuner Press the numeric buttons and TV d3 at the same time to select the TV channels 21 TV INPUT Press TV INPUT and TV 13 at the same time to select the input signal TV input or video input SLEEP Press to activate the Sleep Timer function and the duration which the receiver turns off automatically The number 5 MASTER VOL TV VOL and D gt buttons have tactile dots Use the tactile dots as references when operating the receiver This button is also available for DIGITAL MEDIA PORT adapter operation For details on the function of the button see the operating instructions supplied with the DIGITAL MEDIA PORT adapter Notes e Some functions explained in this section may not work depending on the model The above explanation is intended to serve as an example only Therefore depending on the component the above operation may not be possible or may operate differently than described 1 Installing speakers This receiver allows you to use a 5 1 channel system 5 speakers and one sub woofer To fully enjoy theater like multi channel surround sound requires five speakers two front speakers a center speaker and two surround speakers and a sub woofer 5 1 channel Example of a 5 1 channel speaker system configuration EN Front speaker l
Download Pdf Manuals
Related Search