Home

D-Link Wireless 3-Port Print Server Retail (DSDLDP313) Print Server

1. This wizard will help you to install your printer quickly and easily To begin installing your printer click Next How is this printer attached to your computer If it is directly attached to your computer click Local Printer If it is attached to another computer click Network Printer Local printer Network printer Type the network path or the queue name of your printer If you don t know its name click Browse to view available network printers Network path or queue name Do you print from MS DOS based programs Yes e No lt Back Next gt Cancel 46 TCP IP Printing for Windows 98SE Me continued At the next screen browse for the printer port Highlight the port as shown The Port Name in this window is just an example Click OK If the network path is not specified type in the IP Address of the DP 311U and the Port Name The Port Name shown at right is just an example Select Yes or No to answer the question Do you print from MS DOS based pro grams Click Next Highlight the printer as shown If the desired printer is not on the list click Have Disk and insert the printer driver disk that came with your printer to install the printer drivers Click Next Click Next Browse for Printer 2 x Select the network printer that you want to add Note Printers are usually attached to computers Network Neighborhood E Entire Network ah Print Servers TCP
2. and select File gt Print New N u from the menu Open seo Intitled Open Recent P Close 3ew Save 92S Save As 438 Save All Revert to Saved Page Setup Print Select Edit Printer List from the Printer dialog box rosa Di Copies W Collated Pages All OFrom 1 to 1 e Cancer Print c 8608 Printer List Click Add Printer a Kind Status Delete gt if Add Printer 52 Setting up Apple Talk or LPR Printing in Mac OS X continued Select the printing protocol preferred AppleTalk or LPR Printers using IP In this example pvwame 7 Directory Services AppleTalk has been E ps 116688U7 Laserwriter selected Printer Model Auto Select l Cancel AppleTalk protocol a After selecting ALA en en AppleTalk the Port pPs 116688 U1 Laserwriter g Name of the Print Server will be dis played The Port Name shown here is k an example only Click on the Port to EEA rri which the post script printer is connected Then select the printer model from the dialog box displayed here Click Add Printer and the Printer Port configuration is complete Select the Printer Port just configured in the Print window Click Print to print your document 53 Setting up Apple Talk or LPR Printing in Mac OS X continued LPR Printers using IP protocol _LPR Printers using IP When you select LPR Printers using
3. Click Add Port Add Part Delete Part Type in the IP Address of IP Address the DP 301U Make sure sa the Port Name is accu rate The Port Name at Port Name right is just an example fees ssSs s SsS Click OK LPR for TCP7IP Printing Properties Ports Settings Port List The Port name and IP Address will be displayed The Port Name at right is just an example Add Port Delete Port Click OK Cancel TCP IP Printing for Windows 98SE Me continued Hetwork i x Configuration Identification Access Control The following network components are installed E Client for Microsoft Networks II LPR for TCP IP Printing ft Microsoft Family Lagan D Link AirPlus treme G D wL G650 Dial Up Adapter ofl Properties Remove Primary Network Lagar Micrasott Family Logor File and Print Sharing Description Click OK alle System Settings Change Windows will ask for ou must restart your computer before the new settings will take effect a restart Do you want to restart pour computer now Click Yes 45 TCP IP Printing for Windows 98SE Me continued Once your computer has rebooted click on Start gt Settings gt Printers gt Add Printer When the Add Printer Wizard screen appears Click Next Select Network Printer Click Next Type in the path if you know it or Click Browse Add Printer Wizard
4. C RARP C BOOTP DHCP Mame public Access Right Read y rite Name i Access Right Read Only w Name i Access Right Read Only WORKGROUP Maximum Connected Stations dap Maximum Number of Sessions 32 AppleTalk Zone USB Chooser Name PS 116688 L1 Frinter Type LaserWriter Postscript Level Level Font Group standard 35 v cave DP 311U Wireless USB Print Server Tools Help 40 TCP IP Printing for Windows 98SE Me continued Network Ki Configuration Identification Access Control The following network components are installed m Client for Microsoft Networks m Microsoft Family Logon D Link AirPlus treme G D vvL BB80 Dial Up Adapter Realtek RTL8133 Family PCI Fast Ethernet MIC Go to Start gt Settings gt Control Panel Double click on Network a HETTIBVE Propenies Click Add Primary Network Logor Microsoft Family Logon File and Print Sharing Description Ok Cancel Select Network Component Type Ei x Click the type of network component you want to install Highlight Client fS Adapter NEL Frotocal Cancel Click Add Service client enables your computer ta connect to other computers 41 TCP IP Printing for Windows 98SE Me continued At this window click Have Disk 1 Insert the DP 311U CD ROM into your CD ROM drive Select the letter representi
5. So Set up Faxing Start the Add Printer Wizard Add Printer Wizard Welcome to the Add Printer Wizard This wizard helps you install a printer or make printer connections Sy lf you have a Plug and Play printer that connects AJ through a USE part for any other hot pluggable port such as IEEE 1394 infrared and so an you do not need to use this wizard Click Cancel to Close the wizard and then plug the printer s cable Into pour computer ar paint the printer toward your computer s infrared port and turn the printer on Windows will automatically install the printer for vau To continue click Next Click Next i Cancel 24 TCP IP Printing for Windows XP continued Local or Network Printer The wizard needs to know which type of printer to set up Select Local Printer Select the option that describes the printer you want to use Local printer attached to this computer M Automatically detect and install my Plug and Play printer D ese e ct Aut om ati C al ly A network printer or a printer attached to another computer detect and install my Plug and Play printer e Tosetupanetwork printer that is not attached to a print server J use the Local printer option Click Next lt Back we Cancel Add Printer Wizard Select a Printer Port Computers communicate with printers through ports Select the port you want your printer to use If the port is not lis
6. CS Help System Device Sewer Mame ps 116688 Location Admin Contact Password Mew Password confirm Again Port Setting USB Port Name P8 116688 U1 Description PJL Printer No Wireless Interface Connection Mode Infrastructure Ad Hoc ESS ID D Link Wireless Wireless Channel n v Transmission Rate Fully Automatic he WEP Key Encryption 9 Disable B4 bits C 128 hits WEP key asci O HEX Confirm WEP Key Select your Connection Mode Enter the ESS ID of the remote access point or wireless router you wish to connect to If you would like to set WEP Encryption select the encryption level and the key here Click Save 39 TCP IP Printing for Windows 98SE Me continued When you select TCP IP Protocol at the Network window the screen below appears We recommend that you keep the default settings as shown If you need to make changes make sure to click Save after you have made the changes You may wish to make a note of the IP Address D Link Building Networks for People Home Confi guration Metwork TCPAP Protocol IP Address Subnet Mask Default Gateway IP Assignment SNMP Community 1 SNMP Community 2 SNMP Community 3 HetBEUI Protocol Workgroup Maximum Limitation AppleTalk Protocol 192 168 010 000 0 Manually Assign Assign Automatically Using
7. File Edit wiew Favorites Tools Q 9 20 Address http 1192 188 0 10 D Link DP 311U z Wireless USB Print Server Home Tete NM Ing Tools Help System Status Server Name PS 116688 Model DP 311U Hardware Version A1 Firmware Version 1 10d 2003 02 25 MAC Address DO FF 27 ED 55 25 IP Address 1192 168 0 10 Manual Up Time 0 days 00 09 57 Printer Status USB Printer Name PS 116688 U1 Printer Status Off line 21 TCP IP Printing for Windows XP continued At the Configuration window write down the Port Name for future reference You will need this information later in the configuration process D Link DP 311U Wireless USB Print Server Home Contiguratior Network _ Tools _ Help System Device server Mame P amp 16888 ea V ________Jj ere _____H Password New Password foo confirm Again a PJL Printer No Wireless Interface Connection Mode Infrastructure Ad Hoc ESS ID D Link Wireless Wireless Channel mi v Transmission Rate Fully Automatic WEP Key Encryption 9 Disable B4 bits C 128 hits WEF Key ASCII O HEX Confirm WEP Kev Dave Select your Connection Mode Enter the ESS ID of the remote access point or wireless router you wish to connect to If you would like to set WEP Encryption select the encryption level and the key here Click Save 22 TCP I
8. Port Settings Port Mame iP 1 Sz 158 n0 1 Printer Name or IP Address 192 168 0 10 Protocol C2 Raves Ce LPR Raw Settings Part Humber LPR Settings Queue Mame PS 116688 L1 LPR Byte Counting Enabled C SHIP Status Enabled Goranonity TI arme public SHMP Brevine Indes Add Printer Wizard Install Printer Software The manufacturer and model determine which printer software to use Select the manufacturer and model of your printer If your printer came with an installation disk click Have Disk If your printer is not listed consult your printer documentation for compatible printer software Manufacturer Printers Compaq EFi Epson Stylus COLOR 740 ESC P 2 SITI Wf Epson Stylus COLOR 760 ESC P 2 sein Sf Epson Stylus COLOR 777 ESC P 2 Digital Epson re x Epson Stylus COLOR 800 ESC P 2 gk This driver is digitally signed Windows Update Tell me why driver signing is important 21 TCP IP Printing for Windows XP continued Add Printer Wizard Name Your Printer You must assign a name to this printer Type a name for this printer Because some programs do not support printer and server name combinations of more than 31 characters itis best to keep the name as short as possible At this screen you can input a name i Printer name for the pri nter Epson Stylus COLOR 740 ESC P 2 Click Next Add Printer Wizard Print Test Page To confirm that the pri
9. SELECTIONAND PERFORMANCE OF THE PRODUCT IS WITH THE PURCHASER OF THE PRODUCT Limitation of Liability TO THE MAXIMUM EXTENT PERMITTED BY LAW D LINK IS NOT LIABLE UNDER ANY CONTRACT NEGLIGENCE STRICT LIABILITY OR OTHER LEGAL OR EQUITABLE THEORY FORANY LOSS OF USE OF THE PRODUCT INCONVENIENCE OR DAMAGES OF ANY CHARACTER WHETHER DIRECT SPECIAL INCIDENTAL OR CONSEQUENTIAL INCLUDING BUT NOT LIMITED TO DAMAGES FOR LOSS OF GOODWILL LOSS OF REVENUE OR PROFIT WORK STOPPAGE COMPUTER FAILURE OR MALFUNCTION FAILURE OF OTHER EQUIPMENT OR COMPUTER PROGRAMS TO WHICH D LINK S PRODUCT IS CONNECTED WITH LOSS OF INFORMATION OR DATA CONTAINED IN STORED ON OR INTEGRATED WITH ANY PRODUCT RETURNED TO D LINK FOR WARRANTY SERVICE RESULTING FROM THE USE OF THE PRODUCT RELATING TO WARRANTY SERVICE ORARISING OUT OF ANY BREACH OF THIS LIMITED WARRANTY EVEN IF D LINK HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES THE SOLE REMEDY FORA BREACH OF THE FOREGOING LIMITED WARRANTY IS REPAIR REPLACEMENT OR REFUND OF THE DEFECTIVE OR NON CONFORMING PRODUCT THE MAXIMUM LIABILITY OF D LINK UNDER THIS WARRANTY IS LIMITED TO THE PURCHASE PRICE OF THE PRODUCT COVERED BY THE WARRANTY THE FOREGOING EXPRESS WRITTEN WARRANTIES AND REMEDIES ARE EXCLUSIVE AND ARE IN LIEU OF ANY OTHER WARRANTIES OR REMEDIES EXPRESS IMPLIED OR STATUTORY 13 Governing Law This Limited Warranty shall be governed by the laws of the State of California Some states do not allow exclusio
10. The detected device is of unknown type Be sure that 1 The device is properly configured 2 The address on the previous page is correct Either correct the address and perform another search on the network by returning to the previous wizard page or select the device type if you are sure the address is correct Device Type Standard Settings Configure Standard CPAP Port Monitor onn Port Settings Port Name IP_192 168 0 1 0 Printer Name or IP Address 132 168 0 10 Protocol Raw Raw Settings LPR Settinas CILPR Byte Counting Enabled _ SNMP Status Enabled TCP IP Printing for Windows XP continued Click Next Click Finish Highlight the printer as shown If the desired printer is not on the list click Have Disk and insert the printer driver disk that came with your printer to install the printer drivers Click Next Add Standard TCP IP Printer Port Wizard Additional Port Information Required The device could not be identified The detected device is of unknown type Be sure that 1 The device is properly configured 2 The address on the previous page is correct Either correct the address and perform another search on the network by returning ta the previous wizard page or select the device type if you are sure the address is correct Device Type O Standard Genetic Network Card Custom Contigure Standard CPIE Port Monitor
11. it is recommended that you enter a password for the Print Server Port Name This is the assigned name for the USB port Description Optional A brief description for the USB port Speed Printer port speed High or Low PJL Printer This feature is used to support Hewlett Packard PJL Printer Job Language standard for bi directional printing Connection Mode Ad Hoc refers to two or more 802 11b wireless devices that communicate directly with one another without using an access point or any connection to a wired network Infrastructure refers to an 802 11 network in which wireless devices communicate with each other by first going through an Access Point AP or wireless router ESS ID The workgroup name of your Wireless Network All wireless devices must all have the same SSID to communicate on the Wireless Network All D Link Wireless devices have the default SSID of default all lower case Wireless Channel Displays the channel information Make sure your the setting here matches the setting on your access point Transmission Rate You can adjust the transmission rate to get the best signal possible depending on your usage and environment WEP Key Encryption 64 bit WEP encryption uses a 10 hexidecimal character key 128 bit WEP uses a 26 hexidecimal character key The WEP encryption key must match the WEP settings on your AP or wireless router to connect properly WEP Encryption Enter the WEP key that you wish to use in this f
12. Add Port S erver in th e Print er For which device do you want to add a port N ame or IP Address field The Enter the Printer Name or IP address and a port name for the desired device Port Name field will Printer Name or IP Address 192 168 0 19 automatically be filled in Bot Name iP 192168010 Click Next Add Standard TCP IP Printer Port Wizard Additional Port Information Required The device could not be identified The detected device is of unknown type Be sure that 1 The device is properly configured 2 The address on the previous page is correct Either correct the address and perform another search on the network by returning to the previous wizard page or select the device type if you are sure the address is correct Select Custom Device Type Then click on Settings na Settings 34 TCP IP Printing for Windows 2000 continued Configure Standard CPAP Port Monitor ree Port Settings Port Name IPL 92 168 0 10 Printer Name or P Address 192 168 0 10 Protocol Select LPR O Raw Raw Settings t Numbe Input the port name of LPR Settings the port being used by i the printer CILPR Byte Counting Enabled _ SNMP Status Enabled Click OK Add Standard TCP IP Printer Port Wizard Additional Port Information Required The device could not be identified The detected device is of unknown type Be sure that 1 Th
13. IP LPR a m 192 168 0 10 SS ps 116688 u1 OK Cancel Add Printer Wizard m Type the network path or the queue name of your printer If you don t know its name click Browse to view available CUN network printers Network path or queue name i 32 158 0 10 ps 115688 u1 Do you print from MS DOS based programs C Yes Mo lt Back Cancel Add Printer Wizard LL Click the manufacturer and model of your printer If your printer came with an Ca installation disk click Have Disk If your printer is not listed consult your printer documentation for a compatible printer Manufacturers Printers Epson Stylus Pro ESC P 2 Epson Stylus Pro XL ESC P 2 Epson Stylus Pro XL ESC P 2 Epson T 750 Color amp ge Epson T 1000 EPSON Stylus COLOR 40 m gm lt Back Cancel You can type a name for this printer or you can use We the name supplied below When you are ready click Finish to install the printer and add it to the Printers folder Printer name Your Windows based programs will use this printer as the default printer lt Back Finish Cancel 4T TCP IP Printing for Windows 98SE Me continued Select Yes to print a test page Click Finish Go to Start gt Settings gt Printers Check to see that your printer is installed Add Printer Wizard Alter vaur printer installed Windonws can pinta tes p
14. IP Proto col this window will ap pear LPR Printer s Address 192 168 0 10 Internet address or DNS name L3 Use Default Queue on Server Type the IP Address of the Queue Name PS 116688 U1 Print Server into the LPR Printer s Address field In the Queue Name field type in the Port Name of the post script printer that is connected to the Print Server The Port Name illustrated here is only an example Select the printer model from the dialog box In the Queue Name field type in the Port Name of the post script printer that is connected to the Print Server The Port Name illustrated here is only an example Select the printer model from the dialog box Click Add and the process is complete Close all Print Center windows select the Printer Port that was just selected Click Print to print the document Click Add and the process is complete 54 Setting up Apple Talk Printing in Mac 9 The AppleTalk network protocol is used with computers using the MacOS operating system It can be used for network communications over standard Ethernet or Fast Ethernet using the EtherTalk transport or over a proprietary low speed LocalTalk transport Your Print Server can be used for network printing to PostScript printers You can print from any MacOS computer connected to your Ethernet network either directly using an EtherTalk connection or indirectly through a LocalTalk to Ether Talk router NOTE The Chooser name
15. if not installed and used in accordance with the instructions may cause harmful interference to radio communication However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help FCC Caution Any changes or modifications not expressly approved by the party responsible for compliance could void the user s authority to operate this equipment This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions 1 This device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation IMPORTANT NOTE FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment This equipment should be installed and operated with a minimum distance of about 8 inches 20cm between the radiator and your body Thi
16. network E DC Power Connector The DC power input connector is located on the Print Server s rear panel and is labeled DC 5V Wireless Basics D Link wireless products are based on industry standards to provide easy to use and compatible high speed wireless connectivity within your home business or public access wireless networks D Link wireless products will allow you access to the data you want when and where you want it You will be able to enjoy the freedom that wireless networking brings AWLAN is a cellular computer network that transmits and receives data with radio signals instead of wires WLANs are used increasingly in both home and office environments and public areas such as airports coffee shops and universities Innovative ways to utilize WLAN technology are helping people to work and communicate more efficiently Increased mobility and the absence of cabling and other fixed infrastructure have proven to be beneficial for many users Wireless users can use the same applications they use on a wired network Wireless adapter cards used on laptop and desktop systems support the same protocols as Ethernet adapter cards People use wireless LAN technology for many different purposes Mobility Productivity increases when people have access to data in any location within the operating range of the WLAN Management decisions based on real time information can significantly improve worker efficiency Low Implementation C
17. of a printer connected to one of the Print Server s ports is the same as its Port Name If you are using Apple Talk printing you will need to make sure that every Port Name is unique among all of the network printers in your Apple Talk zone The Port Names shown in this manual are examples only Setting up the Print Server for AppleTalk Printing To set up your Print Server so that it can be used for AppleTalk printing W Make sure the Apple Talk protocol is enabled in your Macintosh E Change the IP Address on one of the computers on your network to 192 168 0 x where x is any number between 11 254 W Type192 168 0 10 into the address field of your web browser 192 168 0 10 is the default IP Address of the DP 311U M Select the Network tab and scroll to the bottom to the AppleTalk protocol section W f your AppleTalk network is divided into AppleTalk zones you will have to specify which zone the Print Server should be in You should locate the Print Server in the same zone as most of the users who will be using it If your network is not divided into zones the AppleTalk Zone field should contain a single asterisk 55 Printing from MacOS Client Workstations The exact procedure for selecting a PostScript printer connected to your Print Server may vary slightly depending on what printer driver version you are using The procedure described below assumes you are using the LaserWriter 8 To choose a printer connected to your P
18. 0 Note Residential Gateways Broadband Routers will automatically assign IP Addresses to the computers on the network using DHCP Dynamic Host Con figuration Protocol technology If you are using a DHCP capable Gateway Broadband Router you will not need to assign Static IP Addresses If you are not using a DHCP capable Gateway Broadband Router or you need to assign a Static IP Address please follow these instructions Control Panel E Tour Windows xP u Paint dy Help and Support i Files and Settings Transfer a 3 wizard yp Search BH Double click Control Panel All Programs D E Go to Start ew Printers and Faxes P m g Turn OFF Computer Networking Basics continued Assigning a Static IP Address in Windows XP 2000 amp Control Panel File Edit View Favorites Tools Help ay Pa M 2 po Search 7 Folders iii Address D Control Panel Accessibility Options mM Control Panel A Add Hardware E i 1 Add or Remove Programs Date and Time Network dina Connections See Also GB Folder Options o C Fonts Windows Update gt Game Controllers Help and Support FP internet Options ta Keyboard m Network Connections Phone and Modem Options Power Options Ja Printers and Faxes Regional and Language Options gt Scanners and Cameras A Scheduled Tasks 2 Sounds and Audio Devices Speech X system ef Taskbar and Start Menu S User Accounts Connects t
19. 2 158 0 10 Manual Up Time 0 days 00 09 57 Printer Status USB Printer Name PS 116688 U1 Printer Status Off line Refresh 13 Home Click on Home tab from the tools bar of the main screen to display information of the DP 311U s System Status and Printer Status System Status and Printer Status When you choose and enter the Home tab it will show you the system information see below providing general information regarding the Print Server Click on the lt Refresh gt button to acquire the most updated information Once a printer is connected to the Print Server the Printer Status will show Online D Link _ DP 311U ef Wireless USB Print Server Home 145i lem jae UT ES Help System Status Server Mame P8 115588 Model DP 311U Hardware version A1 Firmware Version 1 10d 2003 02 25 MAC Address OO FF 27 ED 55 25 IP Address 192 168 0 10 Manuali Up Time 0 days 00 09 57 Printer Status USB Printer Mame PS 116689 11 Printer Status Offline Server Name The name assigned to the Print Server Model The model of the Print Server Hardware Version The version of the hardware on the Print Server Firmware Version The version of the firmware and release date on the Print Server MAC Address The MAC address of the Ethernet port IP Address The IP Address of the Print Server Up Time The length of time the Print Server has been up 14 Configuration C
20. 5 Lexmark Optra SE 3455 Lexmark Optra 1614 Lexmark Optra W810 Lexmark Z53 Other printers from the brands listed above may also be supported For an updated compatibility list please visit http www support dlink com 76
21. D Link DP 311U Wireless Print Server Manual D Link Building Networks for People Contents Package Concise 3 MOU IORN Dee nme ene eee ee eee ee ee eke eee eee ee 4 VVIFCIOSS BAsI0Ssb e 8 Setting p the s Dg aa 10 SC AP sae E EE 12 Using the Web Configuration iii 13 TCP IP Printing for Windows XP ssscecccsdecuocessctinsusestvncsaneneecaceeseseseucssec 21 TCP IP Printing for Windows 2000 29 TCP IP Printing for Windows 98SE Me 38 Unix Linux Printing See PS Admin Manual on CD ROM 49 Setting up AppleTalk or LPR Printing in MAC OSX 50 Setting up Apple Talk Printing in MAC OS9 55 NCIWOTCINGBASICSainnanio iron 58 Technical SPECIHICAHONS iii i ia 70 Contacting FECAAIGAlSUPPO Cirio 71 Warranty and REFISIraloN ona nen point 12 Appendix DP 311U Printer Compatibility List 19 Package Contents Contents of Package D Link DP 311U Fast Ethernet Print Server Manual and Warranty on CD Printed Quick Installation Guide If any of the above items are missing please contact your reseller System Requirements m A computer with an installed Ethernet adapter Windows XP 2000 ME 98SE Apple Mac OS with AppleTalk Linux Internet Explorer 6 0 or Netscape Navigator version 6 0 or above with JavaScri
22. Documents folder and any printers connected to this computer have been shared To apply these settings click Nest When the changes chia Mec IC ext Please wait while Network Setup Wizard the Network Please wait Setup Wizard SS configures the computer Please wait while the wizard configures this computer for home or small office networking This process may take a few minutes This may take a few minutes 61 Networking Basics continued In this window select Network Setup Wizard the best option In You re almost done this example Create a Network Setup Disk has been Miu c TII M selected the Windows XP CD or a Network Setup Disk You will run this disk hat do you want ta do on each of the computers on your Use the Network Setup Disk already have network C Use my Windows XP CD CO Just finish the wizard don t need to run the wizard on other computers Click Next Insert a disk into the Network Setup Wizard Floppy Disk Drive in Insert the disk you want to use this case drive A Insert a disk the into the following disk drive and then click Next 3M Floppy IF you want to format the disk click Format Disk Format the disk if you wish and Click Next 62 Networking Basics continued Please wait while the Network Setup Wizard copies the files Copying i c Please wait while the wizard copies Files mi Please read the information under
23. Here s how in the screen below After you complete the Network Setup Wizard you will use the Network Setup Disk to run the Network Setup Wizard once on each of the computers on your network To continue Click Next Network Setup Wizard To run the wizard with the Hetwork Setup Disk SI e Complete the wizard and restart this computer Then use the Network Setup Disk to run J the Network Setup Wizard once on each of the other computers on your network Here s how 1 Insert the Network Setup Disk into the next computer you want to network 2 Open My Computer and then open the Network Setup Disk 3 Double click netsetup 63 Networking Basics continued Network Setup Wizard Completing the Network Setup Wizard Tou have successfully set up this computer for home or small office networking For help with home or small office networking see the following topics in Help and Support Center Using the Shared Documents folder Sharing files and folders To see other computers on your network click Start and then click My Network Places To close this wizard click Finish EITNNTUM The new settings will take effect when you restart the computer Click Yes to restart the computer System Settings Change a You must restart your computer before Ehe new settings will take effect By Do vau want to restart your computer now You have completed configuring this computer Next you will nee
24. P Printing for Windows 2000 continued full Printer Wizard Local ar Metenrk Printer ls ne printer atlached ip you computer If the painter is dieci attached to your computes M Fat im attached ta another computer or directly bo the resti click Halok print Select Local Printer i e Automatically detect and install mp Plug and Play piter C Matwork printer Mes Printer Detection This wend sutomebcally detects and malali rew Flug and Play poniers window wat unable lo dateci ary Plug and Play porters Click Mew pou A want to install ihe porbei menuely Click Next Rihi Printer Wizard Select the Printer Port Select Create a new port at the Computers communicate wth porters through ports pull down menu highlight Standard TCP IP Port Select the port pou wart your prier Ea use ll the partis mot lished you can create a fess port Hole Mask computer use the LPT 1 port to communicate wath a local pini c Craste a new port S iE Type Click Next TCP IP Printing for Windows 2000 continued Add Standard TCP IP Printer Port Wizard Welcome to the Add Standard TCP IP Printer Port Wizard rau use this mrad lo add poil fot nebzsrk peret Before continurmg be sure that 1 ihe dance n burned on 2 The nesteamik i connected and conliguied Ta conlra chok Haw Click Next Add Standard TCP IP Printer Port Wizard Type in the IP Address of the Print
25. P Printing for Windows XP continued When you select TCP IP Protocol at the Network window the screen below appears We recommend that you keep the default settings as shown If you need to make changes make sure to click Save after you have made the changes You may wish to make a note of the IP Address D Link _ DP 311U Building Networks for Penple Wireless USB Print Server Home UE Network _Tools Hel TCPAP Protocol IP Address 1 42 158 0 10 Subnet Mask 255 255 255 0 Default Gateway 0 0 0 0 IP Assignment Manually Assign Q Assign Automatically Using C RARP C BOOTP C DHCP SNMP Community 1 Name public Access Right Read Write v SNMP Community 2 Name Access Right Read Only SNMP Community 3 Name Access Right Read Only NetBEUl Protocol Workgroup WORKGROUP Maximum Limitation Maximum Connected Stations 32 Maximum Number of Sessions a2 AppleTalk Protocol AppleTalk Zone St USB Chooser Name PS 1185588 L11 Printer Type LasenWriter PostScript Level Level 2 Font Group Standard 35 dl cave 23 TCP IP Printing for Windows XP continued gt Printers and Faxes Go to Start gt Settings gt Printers and Faxes gt File Edit View Favorites Tools Help Add a Printer Iz Tl j i K C Pack Pi A Search TA Printers and Faxes Address Printer Tasks 3 Add a printer
26. age s pou can condita het he pintei i setup peopeshi told you ike to print a best page ca T Ho a o ce Ea Printers File Edit View Go Favorites Help uo ug m dl Eomvard Up Cut Copy Paste EPSON Stylus COLOR 40 Add Printer Add Printer The Add Printer wizard Walks you step by step through installing a printer Just follow the instructions on each screen Unix Linux Printing Please refer to the PS Admin Manual on the CD included with your purchase for information on setting up the Print Server in Unix Linux 49 Setting up Apple Talk or LPR mn in ma Ha A With Mac OSX you can use AppleTalk or LPR printers using IP protocols for printing through Print Servers Follow the instructions below for setting up the Print Server After attaching the Print Server to your network using the directions provided in the Quick Installation Guide change the IP Address of your Macintosh to access the Print Server s web configuration Open your System Preferences window and Click Network At the Configure pull down menu select Manually Internet amp Network Internet Network QuickTime Sharing ga Network Location Automatic Show Built in Ethernet ConfigureE A TP Elo L0 y Using BootP n TEI amavame Servers Optional IP Address 4 2 2 2 Provided by DHCP Server Subnet Mask Router SE OR DHCP Client ID Optional Example apple com earthlink net E
27. d at no charge to the original owner or to refund at D Link s sole discretion Such repair or replacement will be rendered by D Link at an Authorized D Link Service Office The replacement Hardware need not be new or have an identical make model or part D Link may in its sole discretion replace the defective Hardware or any part thereof with any reconditioned product that D Link reasonably determines is substantially equivalent or superior in all material respects to the defective Hardware Repaired or replacement Hardware will be warranted for the remainder of the original Warranty Period from the date of original retail purchase If a material defect is incapable of correction or if D Link determines in its sole discretion that it is not practical to repair or replace the defective Hardware the price paid by the original purchaser for the defective Hardware will be refunded by D Link upon return to D Link of the defective Hardware All Hardware or part thereof that is replaced by D Link or for which the purchase price is refunded shall become the property of D Link upon replacement or refund Limited Software Warranty D Link warrants that the software portion of the product Software will substantially conform to D Link s then current functional specifications for the Software as set forth in the applicable documentation from the date of original retail purchase of the Software for a period of ninety 90 days Warranty Period prov
28. d to run the Net work Setup Disk on all the other computers on your network After running the Network Setup Disk on all your computers your new wireless network will be ready to use 64 Networking Basics continued How to assign a Name to your computer To name your computer please follow these directions in Windows XP Click Start in the lower left corner of the screen Right click My Computer Select Properties and Click 4 Internet e My Documents ge Internet Explorer cJ 1 nf E mail 2 My Recent Documents Outlook Express ES Command Prompt Tr PI MSN Explorer a My Computer Open a My Network Explore e Windows Media Player 2 Search eR E Control Panel ls Windows Movie Maker Map Network Drive we Connect To m e Mv Pictures 77 My Music Manage Disconnect Network Drive Tour Windows KP 43 KS Printers and E Show on Desktop Rename i Files and Settings Transfer Wizard Help and Su System Properties Select the Computer Name tab in the System System Restore tomatic Updates Remote Properties window General ji Hardware Advanced kg Windows uses the following information to identify your computer r on the network E You may enter a 20 For example Kitchen Computer ar Mary s Computer Description Computer 0 ptional Full computer name Office Workgroup Accounting To use the Network Identification Wizard to j
29. e DP 311U s USB port version 1 1 can transmit to high speed laser printers much faster than a PC s parallel printer port N Because the DP 311U is very portable and inexpensive compared to a PC based print server and the Print Server connects to your file servers through the network printers can be deployed to locations of maximum convenience to users The DP 311U offers extraordinary flexibility operating with all major network operating systems and protocols B TCP IP UNIX Ipr Ipd Windows NT 2000 Windows 95 98SE ME Windows XP NetWare 5 x NDPS LPR Remote Printing E NetBEUI Windows 2000 XP Windows 95 98SE ME Microsoft LAN Manager IBM LAN Server E AppleTalk MacOS EtherTalk Windows based setup and administration software PS Admin is supplied with the Print Server making configuration and management quick and easy The Print Server also supports configuration and management via the Telnet protocol for networks without Windows compatible systems External Features Port Connectors The DP 311U s USB port is located on its rear panel The USB can be configured using the PS Admin program or the print server s Telnet interface See the PS Admin User s Guide available on the CD that came with the DP 311U for information about configuring the print server s ports The Print Server also supports web configuration permitting users to configure settings through the web browser The default IP Address is as follows gm Defa
30. e device is properly configured 2 The address on the previous page is correct Either correct the address and perform another search on the network by returning to the previous wizard page or select the device type if you are sure the address is correct Device Type O Standard Generic Network Card Custom Settings Click Next ca fL ee Add Standard TCP IP Printer Port Wizard Completing the Add Standard TCP IP Printer Port Wizard You have selected a port with the following characteristics SNMP No Protocol LPR PS 116633 U1 Device 192 168 0 10 Port Name IP_192 168 0 10 Adapter Type To complete this wizard click Finish Click Finish rs cc TCP IP Printing for Windows 2000 continued Add Printer Wizard Install Printer Software The manufacturer and model determine which printer software to use Highlight the printer as shown If the desired printer is not on the list click Have Disk and X Select the manufacturer and model of your printer If your printer came with an installation disk click Have Disk If your printer is not listed consult your printer documentation for compatible printer software insert the printer driver disk that emm Pines I I Compaq COLOR 740 ESC P 2 came with your printer to install Dataproducts oen Sus COLOR 760 ESC P 2 the printer drivers ves Sf Epson Stylus COLOR 777 ESC P 2 Epson Rd m ou COLOR 800 ESC P 2 mei mm ara mmm EG This drive
31. eilings or other objects that the wireless signals must pass through may limit the range Typical ranges vary depending on the types of materials and background RF radio frequency noise in your home or business The key to maximizing wireless range is to follow these basic guidelines 1 Keepthe antenna of the DP 311U in an upright position 2 Keep the number of walls and ceilings between the DP 311U and other network devices to a minimum each wall or ceiling can reduce your D Link wireless product s range from 3 90 feet 1 30 meters Position your devices so that the number of walls or ceilings is minimized 3 Beaware ofthe direct line between network devices A wall that is 1 5 feet thick 5 meters at a 45 degree angle appears to be almost 3 feet 1 meter thick At a 2 degree angle it looks over 42 feet 14 meters Position devices so that the signal will travel straight through a wall or ceiling instead of at an angle for better reception 4 Building Materials can impede the wireless signal a solid metal door or aluminum studs may have a negative effect on range Try to position wireless devices and computers with wireless adapters so that the signal passes through drywall or open doorways and not other materials 5 Keep your product away at least 3 6 feet or 1 2 meters from electrical devices or appliances that generate extreme RF noise Maximum wireless signal rate based on IEEE Standard 802 11b specifications Actua
32. en Networking Basics Using the Network Setup Wizard in Windows XP In this section you will learn how to establish a network at home or work using Microsoft Windows XP Note Please refer to websites such as http www homenethelp com and http wmww microsoft com windows2000 for information about networking computers using Windows 2000 ME or 98SE Go to Start gt Control Panel gt Network Connections Network Setup Wizard Welcome to the Network Setup SS Wizard This wizard will help you set up this computer to run on your network With a network you carr Share an Internet connection Set up Internet Connection Firewall Share files and folders Share a printer To continue click Next Cancel When this screen appears Click Next 58 Networking Basics continued Network Setup Wizard Before you continue Please follow all the instructions in this window Before you continue review the checklist for creating a network Then complete the following steps Install the network cards moderns and cables Tur on all computers printers and external moderns Connect to the Internet When vau click Nest the wizard will search for a shared Internet connection on your network In this window Network Setup Wizard select the Select a connection method best description of your computer f yo computer Select the statement that best describes this computer connecis to the O This c
33. ically performs a Self Test on each of its major components The final result of the Self Test is signaled by the state of the USB LED indicator following the Self Test Preliminary to the actual component tests the LED indicators are tested to confirm their steady and flashing operation Immediately after power up all three of the green LEDs should illuminate steadily for several seconds Then the USB LED should flash ON three times Irregularity of the LED during this LED test may mean there is a problem with the LED itself The actual component tests immediately follow the LED tests A normal no fault result is signaled by a flashing of the USB LED followed by a darkened LED If the Self Test routine detects any component error then following the LED tests the Self Test will halt and the LEDs will continuously signal the error according to the following table In the event of any such error signal contact your dealer for correction of the faulty unit USB LED Faulty Component low speed flashing Need to reload firmware steady ON Flash Erase Program error Wireless LAN card detect error Wireless LAN card CIS error Wireless LAN card I O error Getting Started Below is a sample network using the DP 311U The DP 311U has a built in Web based management feature that allows users to easily configure and manage their print queue through TCP IP DP 311U z 4GHz Wireless Connection USB Printer Cable DSL Modem Wa
34. ided that the Software is properly installed on approved hardware and operated as contemplated in its documentation D Link further warrants that during the Warranty Period the magnetic media on which D Link delivers the Software will be free of physical defects D Link s sole obligation shall be to replace the non conforming Software or defective media with software that substantially conforms to D Link s functional specifications for the Software or to refund at D Link s sole discretion Except as otherwise agreed by D Link in writing the replacement Software is provided only to the original licensee and is subject to the terms and conditions of the license granted by D Link for the Software Software will be warranted for the remainder of the original Warranty Period from the date or original retail purchase Ifa material non conformance is incapable of correction or if D Link determines in its sole discretion that it is not practical to replace the non conforming Software the price paid by the original licensee for the non conforming Software will be refunded by D Link provided that the non conforming Software and all copies thereof is first returned to D Link The license granted respecting any Software for which a refund is given automatically terminates Non Applicability of Warranty The Limited Warranty provided hereunder for hardware and software of D Link s products will not be applied to and does not cover any refurbished product and an
35. ield Confirm WEP Key After typing in your WEP key confirm the WEP Key in this field 16 Network Click on the Network tab from the tools bar of the main screen to enter the Network Page it provides network protocol configuration options that include TCP IP NetBEUI and AppleTalk TCP IP Protocol The TCP IP Protocol section will show you the settings required to configure the DP 311U Print Server for TCP IP printing If you forget your IP Address you can use the PS Admin program to configure the DP 311U Print Server The default IP Ad dress is 192 168 0 10 Click the lt Save gt button to ensure the settings are updated and saved NOTE If you change and save the IP Address of the DP 311U you would have to make similar changes on your web browser to access the web configuration again NetBEUI Protocol The NetBEUI Protocol section will show you the settings required to configure the DP 311U Print Server for NetBEUI printing Click the lt Save gt button to ensure the settings are updated and saved AppleTalk Protocol The Apple Talk Protocol section will show you the settings required to configure the DP 311U Print Server for Apple Talk printing Click the lt Save gt button to ensure the settings are updated and saved 17 Network D Link Building Networks for People __DP 311U Wireless USB Print Server Home Configuration etw Tools IP Address 192 168 010 Subnet task 255 255 255 0 Default Gate
36. l data throughput will vary Network conditions and environmental factors including volume of network traffic building materials and construction and network overhead lower actual data throughput rate 9 Setting up the DP 311U Installing the Print Server WARNING Configuration problems may result ifthe Print Server is powered up without first establishing its network connection Follow this procedure to avoid complications at the configuration stage 1 Confirm proper operation of the printer to be connected to the DP 311U 2 When you have confirmed proper operation of the USB printer switch it the power OFF 3 Confirm that your network is operating normally 4 Connect the DP 311U RJ 45 Connector to the network using a straight through CATS cable 5 While the printer is powered OFF install the USB printer cable to connect the printer s USB port to the USB port of the Print Server 6 Switch on the connected printer T Plug the AC power adapter s DC output plug into the DC 5V power socket on the rear panel of the Print Server 8 Plug the power adapter into a power outlet This will supply power to the Print Server as it has no external power switch The green Power LED on the Print Server s front panel should illuminate steadily and the Print Server s Self Test will proceed 10 Power ON Self Test Every DP 311U has been factory tested to operate properly When the DP 311U is powered ON it also automat
37. lick on Configuration tab from the tools bar of the main screen to enter the Con figuration Page it provides the configuration options that include System Device and Port Setting System Device and Port Setting This option will show you settings required to configure the DP 311U Print Server Consult your printers owner manual for the PJL Printer Job Language and print speed supported on your printer Click the lt Save gt button on the bottom of the configuration page to ensure the settings are updated and saved D Link _ DP 311U Building Networks for People Wireless USB Print Server Gl Configuration METTE Ch Help System Device ServerName Ps 1 16688 Location Admin Contact Password New Password Confirm Again Port Setting USB Port Name PS 116688 U1 Description PJL Printer No w Wireless Interface Connection Mode S Infrastructure Ad Hoc ESS ID D Link Wireless Wireless Channel 1 Transmission Rate Fully Automatic J WEP Key Encryption Disable 64 bits 128 bits WEP Key T ASCII O HEX Confirm WEP Key 15 Server Name The name assigned to the Print Server Location optional Input a comment indicating where the Print Server is located Admin Contact Optional Administrator name for the Print Server Password By default the DP 311U does not have a password This is a security risk
38. n or limitation of incidental or consequential damages or limitations on how long an implied warranty lasts so the foregoing limitations and exclusions may not apply This limited warranty provides specific legal rights and the product owner may also have other rights which vary from state to state Trademarks D Link is a registered trademark of D Link Systems Inc Other trademarks or registered trademarks are the property of their respective manufacturers or owners Copyright Statement No part of this publication or documentation accompanying this Product may be reproduced in any form or by any means or used to make any derivative such as translation transformation or adaptation without permission from D Link Corporation D Link Systems Inc as stipulated by the United States Copyright Act of 1976 Contents are subject to change without prior notice Copyright 2002 by D Link Corporation D Link Systems Inc All rights reserved CE Mark Warning This is a Class B product In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and
39. ng the CD ROM drive on your computer from the pull down menu 2 Double click on the folder Ipr 3 Highlight Ipr inf 4 Click OK Click OK to accept the location of the file Select Network Chent Ea Click the Network Client that you want to install then click OK IF you have an installation disk for this device click Have Disk Manufacturers Network Clients 2 Banyan DOS windows 3 1 client Have Disk cence Open x File name Folders 4 v inf g lpr Install From Disk Insert the manufacturer s installation disk inta the drive selected and then click OF Cancel Copy manufacturer s files from GALPA Browse 42 TCP IP Printing for Windows 98SE Me continued Click OK You should now be back to the Network Properties Page Highlight LPR for TCP IP Printing Click Properties Select Network Client E A Click the Network Client that you want to install then click OK IF pau have an installation disk For this device click Have Disk Models i LPR for TCP IP Printing Have Disk Hetwork Ki Configuration Identification Access Control The following network components are installed Primary Network Logon Microsoft Family Logon File and Print Sharing Description TCP IP Printing for Windows 98SE Me continued LPR for TCP IP Printing Properties Parts Settings Port List
40. nter Name PS 116688 U1 Printer Status Off line 29 TCP IP Printing for Windows 2000 continued At the Configuration window write down the Port Names for future reference You will need this information later in the configuration process DLink _ DP 311U Building Networks for People Wireless USB Print Server BITTE Configuration BETTE NR 11 Help_ System Device sererName PS 08888 Location Admin Contact Password Mew Password Confirm Again Port Setting USB Port Name PS 116688 U1 Description PJLPrinter Na Wireless Interface Connection Mode 9 Infrastructure C Ad Hoc ESS ID D Link Wireless Wireless Channel mew Transmission Rate WEP Key Encryption Disable 64 bits 128 bits WEP Key ASCII OHEX Confirm WEP Key Select your Connection Mode Enter the ESS ID of the remote access point or wireless router you wish to connect to If you would like to set WEP Encryption select the encryption level and the key here Click Save 30 TCP IP Printing for Windows 2000 continued When you select TCP IP Protocol at the Network window the screen below appears We recommend that you keep the default settings as shown If you need to make changes make sure to click Save after you have made the changes You may wish to make a note of the IP Address Peo STEP pp 311u Wireless USB Print Ser
41. nter is installed properly you can print a test page Do you want to print a test page gren Yes mee Click Next lt Back Next gt Cancel Add Printer Wizard Completing the Add Printer Q Wizard You have successfully completed the Add Printer Wizard You specified the following printer settings Name Epson Stylus COLOR 740 ESC P 2 Share name lt Not Shared gt Port IP_192 168 0 10 Model Epson Stylus COLOR 740 ESC P 2 Default Yes Testpage No To close this wizard click Finish Click Finish Cancel TCP IP Printing for Windows 2000 Open the web browser and type in the IP Address of the DP 311U For example type http 192 168 0 10 into the Location or Address field Press the Enter or Return Key Note The PC s IP Address must be in the same subnet as the Print Server s IP Address for the two devices to communicate For example if your Print Server s IP Address is 192 168 0 10 with a subnet mask of 255 255 255 0 then your computer s IP Address should be 192 168 0 x where x is a value between 1 254 excluding 10 D Link DP 301U mi Edit wiew Favorites Tools DP 311U Wireless USB Print Server Configuration System Status Server Name PS 116688 Model DP 311U Hardware Version A1 Firmware Version 1 10d 2003 02 25 MAC Address D0 FF 27 ED 55 25 IP Address 1192 168 0 10 Manual Up Time 0 days 00 09 57 Printer Status USB Pri
42. o other computers networks and the Internet ts Start E Control Panel Network Connections File Edit View Favorites Tools Advanced Help 9 Back QJ 27 yo Search Folders AN Network Connections Name Network Tasks LAN or High Speed Internet 4 Create a new Gere connection Disable O Set h Il Right click Local Area M ni Li Disable this network C O n n e cti O n S device Bridge Connections Repair this connection 1 Create Shortcut mj Rename this connection View status of this Rename connection Change settings of this Properties connection Double click Properties Other Places Control Panel Q My Network Places My Documents ij My Computer Details Network Connections Networking Basics continued Assigning a Static IP Address i in Windows XP 2000 i Local Area Connection Properties General Advanced Connect using Bi ii d s TCP IP This connection uses the following items E Click Properties w El Client for Microsoft Networks v File and Printer Sharing for Microsoft Networks B Select Use the mum Protocol TCP IP following IP Address in the Internet Protocol _Fropettes__ Description TC Pil P P rope rties Transmission Control Pratacol Intermet Protocol The default window wide area network protocol that provides communication across diverse interconnected networks C Show icon in notification area when connected Input you
43. oin a domain and create a local user account click Network bte To rename the computer and join a domain Click To rename this computer ar join a domain click Change Change Networking Basics continued How to assign a Name to your Computer m Inthis window enter the Computer Name Changes Computer name ou can change the name and the membership of this computer Changes may affect access to network resources Select Workgroup and enter the name of the Workgroup Ote 0 All computers on your network c RUPEE must have the same Office Workgroup name Mare Click OK pato EA Workgroup accountng ox How to find your IP Address in Windows XP The adapter equipped computers in your network must be in the same IP Ad dress range To verify the IP Address of the adapter please do the following Right click on the Disable nection icon in Repair the task bar View Available Wireless Networks Open Network Connections ME Click on Status i 3 05PM 66 Networking Basics continued How to find your IP Address in Windows XP This window will appear Wireless Network Connection Status KAES Gunner Internet Protocal T CP TF i ce Address T Assigned by DHCP Support tab ress ype SSIQhned OW IP Address 132 158 0 114 Subnet Mask 255 255 255 0 Default Gateway 132 158 0 1 Details E Click Close Assigning a Static IP Address in Windows XP 200
44. omputer connects directly to the Intemet The other computers on my network connect internet through a to the Intemet through this computer View an example gateway router select the second option as shown View an example C5 Other Learn more about home or small office network contiqurations Click Next 59 Networking Basics continued Enter a Computer RESTO description and a Give this computer a description and name Computer name optional Computer description Mary s Computer Examples Family Room Computer or Monica s Computer Computer name Examples FAMILY or MONICA The current computer name is Office Learn more about computer names and descriptions Click Next CO no Enter a Workgroup ET Setup Wizard name All computers y ame your network on your network should have the same Workg rOUp Name vour network by specifying a workgroup name below All computers on your network name should have the same workgroup name Examples HOME or OFFICE Click Next lt Back IL Meo 60 Networking Basics continued Please wait while Network Setup Wizard the Network Ready to apply network settings SI Setup Wizard applies the changes The wizard will apply the following settings This process may take a few minutes to complete and cannot be interrupted Settings Network settings Computer description Mary s Computer Computer name Office Workgroup name Accounting The Shared
45. on your network TCP IP Printing for Windows 98SE Me Open the web browser and type in the IP Address of the DP 311U For example type http 192 168 0 10 into the Location or Address field Press the Enter or Return Key Note The PC s IP Address must be in the same subnet as the Print Server s IP Address for the two devices to communicate For example if your Print Server s IP Address is 192 168 0 10 with a subnet mask of 255 255 255 0 then your computer s IP Address should be 192 168 0 x where x is a value between 1 254 excluding 10 D Link DP 301U File Edit wiew Favorites Tools Qa O x 2 Address http JJ192 168 0 10 D Link Building Networks for People Sq DP 311U z Wireless USB Print Server Configuration System Status Server Name PS 116688 Model DP 311U Hardware Version A1 Firmware Version 1 10d 2003 02 25 MAC Address 00 FF 27 ED 55 25 IP Address 182 168 0 10 Manual Up Time D days 00 09 57 Printer Status USB Printer Name PS 116688 U1 Printer Status Off line 38 TCP IP Printing for Windows 98SE Me continued At the Configuration window write down the Port Name for future reference You will need this information later in the configuration process The Port Name shown here is only an example D Link _ pP 311U Building Networks for People Wireless USB Print Server 1luul mN Configuration BM 2477172 ea gels
46. onday to Friday 8 30am to 9 00pm EST D Link Technical Support over the Internet http support dlink ca email support dlink ca When contacting technical support please provide the following information e Serial number of the unit e Model number or product name e Software type and version number 71 Warranty and Registration Subject to the terms and conditions set forth herein D Link Systems Inc D Link provides this Limited warranty for its product only to the person or entity that originally purchased the product from B6 D Link or its authorized reseller or distributor and BE Products purchased and delivered within the fifty states of the United States the District of Columbia U S Possessions or Protectorates U S Military Installations addresses with an APO or FPO Limited Warranty D Link warrants that the hardware portion of the D Link products described below will be free from material defects in workmanship and materials from the date of original retail purchase of the product for the period set forth below applicable to the product type Warranty Period except as otherwise stated herein 1 Year Limited Warranty for the Product s is defined as follows B Hardware excluding power supplies and fans One 1 Year lE Power Supplies and Fans One 1 Year B Spare parts and spare kits Ninety 90 days D Link s sole obligation shall be to repair or replace the defective Hardware during the Warranty Perio
47. or accessories in the shipping package D Link will only replace the defective portion of the Product and will not ship back any accessories MI The customer is responsible for all in bound shipping charges to D Link No Cash on Delivery COD is allowed Products sent COD will either be rejected by D Link or become the property of D Link Products shall be fully insured by the customer and shipped to D Link Systems Inc 53 Discovery Drive Irvine CA 92618 D Link will not be held responsible for any packages that are lost in transit to D Link The repaired or replaced packages will be shipped to the customer via UPS Ground or any common carrier selected by D Link with shipping charges prepaid Expedited shipping is available if shipping charges are prepaid by the customer and upon request D Link may reject or return any product that is not packaged and shipped in strict compliance with the foregoing requirements or for which an RMA number is not visible from the outside of the package The product owner agrees to pay D Link s reasonable handling and return shipping charges for any product that is not packaged and shipped in accordance with the foregoing requirements or that is determined by D Link not to be defective or non conforming What Is Not Covered This limited warranty provided by D Link does not cover Products if in D Link s judgment have been subjected to abuse accident alteration modification tampering negligence mi
48. osts WLANs are easy to set up manage change and relocate Networks that frequently change can benefit from WLANs ease of implementation WLANs can operate in locations where installation of wiring may be impractical Installation and Network Expansion Installing a WLAN system can be fast and easy and can eliminate the need to pull cable through walls and ceilings Wireless technology allows the network to go where wires cannot go even outside the home or office Scalability WLANs can be configured in a variety of topologies to meet the needs of specific applications and installations Configurations are easily changed and range from peer to peer networks suitable for a small number of users to larger infrastructure networks to accommodate hundreds or thousands of users depending on the number of wireless devices deployed Inexpensive Solution Wireless network devices are as competitively priced as conventional Ethernet network devices Wireless Basics cont Standards Based Technology Based on the IEEE 802 11b standard the DP 311U is interoperable with existing compatible 2 4GHz wireless technology with data transfer speeds of up to 11Mbps when used with other D Link Air devices Installation Considerations The D Link Air DP 311U lets you print through your network using a wireless connection from virtually anywhere within its operating range Keep in mind however that the number thickness and location of walls c
49. pt enabled m Printer must support required Operating System Introduction The D Link DP 311U Print Server is an 802 11b wireless print server that also connects to your Ethernet Fast Ethernet network Now you can locate USB printer services virtually anywhere in your home or office The DP 311U manages the flow of print files from workstations or file servers to connected printers delivering print jobs to printers much faster than a file server on a PC acting as a print server can With one USB v1 1 port tte DP 311U can connect to almost any printer with a USB port The DP 311U includes easy to use software to install on most Windows based networks Protocol support for TCP IP NetBEUI and AppleTalk are provided to ensure seamless connection to major networking Operating Systems The DP 311U has a built in Web Based management feature that allows users to easily configure and manage print queues through TCP IP The DP 311U also supports Telnet as an alternative method to configure the unit The DP 311U improves network printing services in the following ways m The DP 311U delegates print jobs to the connect USB printer This provides workload relief to your file servers and allows the file servers full capacity to be used for file access or other direct services to network users On peer to peer networks workstations can print directly to the Print Server without increasing the load of another workstation or server E Th
50. r IP Address and subnet mask The IP Pa Addresses on your network must be within the same range For example if one computer has an IP Address of 192 168 0 2 the other computers should have IP Addresses that are Internet Protocol TCP IP Properties General You can get IP settings assigned automatically if your network supports seq u enti al like 1 92 1 68 0 3 ca ER need to ask your network administrator for and 192 168 0 4 The Obtain an IP address automatically subnet mask must be the Use the following IP address same for all the computers IP address 18 18 0 2 on the network Subnet mask 255 255 255 0 Default gateway Input your DNS server Use the following DNS server addresses addresses Note If you Preferred DNS server are entering a DNS server Altemate DNS server you must enter the IP _Advanced Address of the Default e IO ee n Gateway o The DNS server information will be supplied by your ISP Internet Service Provider Click OK 69 Technical Specifications Printer Connection Printer Port USB port ver 1 1 Bidirectional Communication Hewlett Packard PJL Printer Job Language standard for bidirectional communication Network Connection Network Standards IEEE 802 3 10Base T Ethernet IEEE 802 11b Wireless Standard Network Data Transfer Rate 10 100 Mbps megabits per second Network Connector RJ 45 connec
51. r is digitally signed Windows Update E Tell me why driver signing is important Click Next Add Printer Wizard Name Your Printer You must assign a name to this printer At this screen you can input a I Type a name for this printer Because some programs do not support printer and server name fo r the p ri nte r Deme COURS of more than 31 characters it is best to keep the name as short as possible Printer name son Stylus COLOR 740 ESC P 2 Click Next cd Lone 36 TCP IP Printing for Windows 2000 continued Add Printer Wizard En Printer Sharing ou can haee Eu ponte vei othe netvecik ureri Select Do not share this printer OO ee ee een VENT DU ea fo Da WM ee It you share this Pinter you must provide share C Share as 3 Click Next Add Printer Wizard l EE _ Print Test Page Select Yes to print a test page a cantem that the punter n mitaled pope pou can porta les page Do you want to pint a test page is C Na Click Next Add Printer Wizard Completing the Add Printer Wizard You have successfully completed the Add Printer Wizard You specified the following printer settings Name Epson Stylus COLOR 740 ESC P 2 Share name lt Not Shared gt Pott IP_192 168 0 10 Model Epson Stylus COLOR 740 ESC P 2 Default Yes Test page No Cl ick Fi n ish To close this wizard click Finish The printer is now ready for printing with Windows 2000
52. rint Server as your MacOS workstation s default printer Open the Chooser by selecting Chooser from the Apple menu Select the LaserWriter 8 icon on the left Make sure that AppleTalk is set to Active A list of all networked PostScript printers will be displayed select a Postscript Printer Double click the name of PS 116688 U1 the Printer Port you wish to use The Printer Ports shown are examples only Preyiew i Active 2 Inactive AppleTalk 56 Printing from MacOS Client Workstations continued If you have not previously E Current Printer Description File PPD Selected set this printer as the 2 Generic default your computer will prompt you for a PostScript Printer Description file Choose Select PPD Select the appropriate printer description file for your printer C3 HP LaserJet 4ML 5 7 01 Click Open GJ HP LaserJet AMP 5 7 01 If your printer is not listed HP LaserJet AMP 300 dpi 5 7 01 ig HP LaserJet 45i 300 dpi 57 01 click Generic to use a de THF LaserJet 451 v2011 110 5 7 01 generic printer HP LaserJet 4 5 7 01 E description zs Use the Generic Post cript Printer Description file Loven If you wish to access this setting in the future you can use the Setup button in the Chooser window The selected printer will become your computer s default printer You may need to choose Page Setup in any applications you have op
53. rning Only a USB printer may be connected to the USB port of the DP 311U Do not connect any other USB devices to the USB port of the DP 301U to do so may damage the unit and will void the warranty for this product For a list of printers that are compatible with the DP 311U please see the Appendix in this manual The compatibility list is not comprehensive Even if it is not included in the list your printer may be compatible with the DP 311U 12 Using the Web Configuration Open your web browser and type http 192 168 0 10 in the address box and press lt Enter gt This set of numbers is the default IP Address of your Print Server Please note that the PC s IP Address must correspond with the Print Server s IP Address in the same segment for the two devices to communicate File Edit wiew Favorites Tools Qm O ha i Address E http 192 1683 0 10 When you entered the default IP address the main screen of the Print Server s configuration will appear see below In addition to the product information you can access and control the Print Server s configuration through four links on the top of this main screen Home Configuration Network Tools and Help D Link _ DP 311U Wireless USB Print Server Home TAIE uc M IUE Tools Help System Status Server Name PS 116688 Model DP 311U Hardware Version A1 Firmware Version 1 10d 2003 02 25 MAC Address OO FF 27 ED 55 25 IP Address 18
54. s transmitter must not be co located or operated in conjunction with any other antenna or transmiter Register your D Link product online at http support dlink com register T4 03 17 03 Appendix DP 311U Printer Compatibility List For Windows The Canon Printer Canon BJC 55 85 Canon S100SP Canon S200SP Canon S300 Canon S330 Canon S400SP Canon S450 Canon S520 Canon S600 Canon S750 Canon S4500 Canon S6300 Canon S9000 The Epson Printer Epson Stylus Color 900 Epson Stylus Color 1160 Epson Stylus Color 2200 Epson Stylus Photo 720 Epson Stylus Photo 810 820 830 890 Epson Stylus Photo 900 Epson Stylus Photo 1280 1290 Epson Stylus C41UX C405 C42UX Epson Stylus C60 C61 C62 Epson Stylus C80 C82 The Lexmark Printer Lexmark Z13 Lexmark Z25 Lexmark Z33 Lexmark Z35 Lexmark Z43 Lexmark Z45 Lexmark Z53 The HP Printer HP DeskJet 640C 656C HP DeskJet 845C HP DeskJet 920C HP DeskJet 948C HP DeskJet 960C HP DeskJet 990Cxi 995C HP DeskJet 1125C 1180C HP DeskJet 1220C HP DeskJet 3320 HP DeskJet 3420 3425 HP Color Inkjet CP1700 HP LaserJet 1200 HP LaserJet 2200 2200d 19 Appendix DP 311U Printer Compatibility List for Windows continued The Lexmark Printer Lexmark 4039 10R Lexmark 5700 Lexmark Optra Color 45 Lexmark Optra C710 Lexmark Optra E E E310 Lexmark Optra K1220 Lexmark Optra M410 M412 Lexmark Optra N Lexmark Optra R Lexmark Optra S1250 S1855 Lexmark Optra SC 127
55. suse faulty installation lack of reasonable care repair or service in any way that is not contemplated in the documentation for the product or if the model or serial number has been altered tampered with defaced or removed Initial installation installation and removal of the product for repair and shipping costs Operational adjustments covered in the operating manual for the product and normal maintenance Damage that occurs in shipment due to act of God failures due to power surge and cosmetic damage Any hardware software firmware or other products or services provided by anyone other than D Link Products that have been purchased from inventory clearance or liquidation sales or other sales in which D Link the sellers or the liquidators expressly disclaim their warranty obligation pertaining to the product Repair by anyone other than D Link or an Authorized D Link Service Office will void this Warranty Disclaimer of Other Warranties EXCEPT FOR THE LIMITED WARRANTY SPECIFIED HEREIN THE PRODUCT IS PROVIDED AS IS WITHOUT ANY WARRANTY OF ANY KIND WHATSOEVER INCLUDING WITHOUT LIMITATION ANY WARRANTY OF MERCHANTABILITY FITNESS FORAPARTICULAR PURPOSE AND NON INFRINGEMENT IF ANY IMPLIED WARRANTY CANNOT BE DISCLAIMED IN ANY TERRITORY WHERE APRODUCT IS SOLD THE DURATION OF SUCH IMPLIED WARRANTY SHALL BE LIMITED TO NINETY 90 DAYS EXCEPTAS EXPRESSLY COVERED UNDER THE LIMITED WARRANTY PROVIDED HEREIN THE ENTIRE RISKAS TO THE QUALITY
56. t Port Selection e USB LISA part print test requires Native DOS mode support on your printer Reset Reset Do you really want to resetthis device YES Factory Reset Din you wantto restare this device to factory default setting 19 Help Click on the Help link from the tools bar of the main screen to enter the Help Page it provides a link to D Link s support website D Link s support website will provide the most up to date information on your DP 311U Print Server Please check the website regularly for product and firmware updates D Link ee DP 311U Building Networks for People gt 2 Wireless USB Print Server Home Configuration Network Tools Help For US customer suppor please visit us online at http suppart dlink cam 20 TCP IP Printing for Windows XP Open the web browser and type in the IP Address of the DP 311U For example type http 192 168 0 10 into the Location or Address field Press the Enter or Return Key Note The PC s IP Address must be in the same subnet as the Print Server s IP Address for the two devices to communicate For example if your Print Server s IP Address is 192 168 0 10 with a subnet mask of 255 255 255 0 then your computer s IP Address should be 192 168 0 x where x is a value between 1 254 excluding 10 See Networking Basics Assigning a Static IP Address in this manual to find out how to change an IP Address D Link DP 301U
57. ted you can create a new port C Use the following port LPT1 Recommended Printer Port Note Most computers use the LETI port to communicate with a local printer Select Create a new port At the The connector for this port should look something like this pull down menu highlight NES Standard TCP IP Port ez lt lt a Create a new port Type of port Standard TCP IP Port Click Next Add Standard TCP IP Printer Port Wizard x 4 Welcome to the Add Standard TCP IP Printer Port Wizard enni You use this wizard to add a port for a network printer Before continuing be sure that 1 The device is turned on 2 The network is connected and configured To continue click Next Click Next lt Back Cancel 25 TCP IP Printing for Windows XP continued Type in the IP address of the Print Server i e 192 168 0 10 The Port Name will automatically be filled in Select Custom Then click on Settings Select LPR Input the port name of the port being used by the printer Click OK Add Standard TCP IP Printer Port Wizard Add Port For which device do you want to add a port Enter the Printer Name or IP address and a port name for the desired device Printer Name or P Address fi 92 168 0 10 Port Name IP_192 168 0 10 Add Standard TCP IP Printer Port Wizard Additional Port Information Required The device could not be identified
58. thernet Address 00 05 02 33 a3 84 la Click the lock to prevent further changes Apply Now 50 Setting up Apple Talk or LPR Printing in Mac OS X continued The default IP Address of the Print Server is 192 168 0 10 Manually change your IP Address to 102 168 0 x where x is any number between 1 and 254 except 10 which is the IP Address of the Print Server The IP Addresses and Subnet Mask shown here are examples only Select the AppleTalk tab in this window and check Make AppleTalk Active Network CI Location Automatic Di Show Built in Ethernet Configure Manually m Domain Name Servers Optional 255 255 255 0 Subnet Mask Search Domains Optional Router 192 168 0 1 Example apple com earthlink net Ethernet Address 00 05 02 33 a3 84 Click the lock to prevent further changes f Apply Now 00 Network DI Location f Automatic Show Built in Ethe met amp Make AppleTalk Active Computer Name D link s Computer Can be changed in Sharing Preferences all AppleTalk Zone Configure Automatically AppleTalk zones are unavailable until AppleTalk is on To start AppleTalk click Save Then choose a zone Click the lock to prevent further changes f Apply Now 51 Setting up Apple Talk or LPR Printing in Mac OS X continued Edit TextEdit Format Window Help To print open a document
59. tor for 10Base T Category 5 twisted pair connection Network Protocols Ethernet Frame Types 802 2 802 3 Ethernet II SNAP auto switching Transport Protocols TCP IP NetBEUI Apple Talk Ether Talk LPR TCP IP Protocols Supported BOOTP SNMP Telnet TFTP FTP LPD RARP DHCP Management and Diagnostics Standard SNMP MIBs MIB II RFC 1213 Diagnostic LED Indicators Pw Lk Act USB Environmental and Physical Power Supply External power supply providing 5V 2 5A Dimensions 3 54 x 3 19 x 1 57 90mm x 81mm x 40mm Weight approx 5 19 oz 147g Operating Temperature 32 to122 F 0 to 50 C Storage Temperature 13 to 131 F 25 to 55 C Humidity 5 to 95 non condensing Emissions FCC Class B CE Class B VCCI Class B 70 Technical Support You can find software updates and user documentation on the D Link website D Link provides free technical support for customers within the United States and within Canada for the duration of the warranty period on this product U S and Canadian customers can contact D Link technical support through our website or by phone Tech Support for customers within the United States D Link Technical Support over the Telephone 877 453 5465 24 hours a day seven days a week D Link Technical Support over the Internet http support dlink com email support dlink com Tech Support for customers within Canada D Link Technical Support over the Telephone 800 361 5265 M
60. ult IP Address 192 168 0 10 E Subnet Mask 255 255 255 0 Note The PC s IP Address must be in the same subnet as the Print Server s IP Address for the two devices to communicate For example if your Print Server s IP Address is 192 168 0 10 with a subnet mask of 255 255 255 0 then your computer s IP Address should be 192 168 0 x where x is a value between 1 254 excluding 10 Front Panel LED Indicators Power USB Steady or flashing green light confirms that the Print Server is powered ON The LED indicator lights up to show that the Print Server is transferring print data through the USB port EthernetWLAN Steady or flashing green light confirms that the Print Server has a good connection to the Ethernet or Fast Ethernet network The indicator blinks off briefly to indicate that the Print Server is receiving or transmitting from the network LED Indicators The front panel of the Print Server features four LED indicators These four indicators are also used by the Print Server s Power ON Self Test POST to indicate any hardware failures Rear Panel Connectors M Network Cable Connector The Print Server s rear panel features an RJ 45 connector for connection to 10Base T Ethernet cabling or 100Base TX Fast Ethernet cabling which should be Category 5 twisted pair cable The port supports the NWay protocol allowing the Print Server to automatically detect or negotiate the transmission speed of the
61. ver Home etwork Metis Help TCPAP Protocol IP Address 192168010 Subnet Mask 255 255 255 0 Default Gateway 0 0 0 0 IP Assignment i Manually Assign lego ae ee AI 2 Assign Automatically Using C RARP C BOOTP DHCP SNMP Community 1 Name public Access Right Ready rite SNMP Community 2 Mame Access Right Read Only SNMP Community 3 Mame Access Right Read Only HetBEUI Protocol Workgroup WORKGROUP Maximum Limitation Maximum Connected Stations 32 Maximum Number of Sessions a2 AppleTalk Protocol AppleTalk Zone LISA Chooser Name F3 115588 U1 Printer Type Laservyriter PostScript Level Level ER Font Group Standard 35 Cave 31 TCP IP Printing for Windows 2000 continued 3 Printers Goto Start gt Settings gt He Edt Wew Go Favoie Hee Printers Y Hack Foner Up Cut Copy Paste Double click on the Add Printer icon Printers Add Printer The Add Printer wizard walks you step by step through Installing a printer Just follow the Instructions on each screen Add Standard TCP IP Printer Port Wizard Welcome to the Add Standard TCP IP Printer Port Wizard rau use ths snzand lo add 4 poil loi 4 netbest portai Belo continuing be sue that 1 ihe device n bunad on 2 The rework amp connected and coniigaed Ta contri ckck How Click Next TCP I
62. way 0 0 0 0 TCPIP Protocol IP Assignment l 9 Manually Assign Assign Automatically Using RARF BOOTP DHCP SNMP Community 1 Name public Access Right Read Write v SNMP Community 2 Mame Access Right Read Only v SNMP Community 3 Mame Access Right Read Only NetBEUI Protocol Workgroup WORKGROUP Maximum Limitation Maximum Connected Stations 32 Maximum Number of Sessions 32 AppleTalk Protocol AppleTalk zone is LISB Chooser Name PS 115588 U1 Printer Type Laservyriter PostScript Level Level 2 Font Group Standard 35 v SAVE Tools Click on the Tools link from the tools bar of the main screen to enter the Tools Page it provides the control options that include Print Test and Reset Print Test Print Test section will allow you to send an ASCII text page from the print server to your printer Your USB printer will have to support native DOS mode for the test page to print Reset Reset section will allow you to reset your print server Click the lt Yes gt button to activate the reset process Reset will restart the print server Factory reset will reset all settings to factory default and restart the print server Default IP address of the print server will be 192 168 0 10 after factory reset D Link X DP 311U Building Networks for People Wireless USB Print Server Home _ Configuration Network Tools _Help Print Tes
63. y product purchased through the inventory clearance or liquidation sale or other sales in which D Link the sellers or the liquidators expressly disclaim their warranty obligation pertaining to the product and in that case the product is being sold As Is without any warranty whatsoever including without limitation the Limited Warranty as described herein notwithstanding anything stated herein to the contrary Submitting A Claim The customer shall return the product to the original purchase point based on its return policy In case the return policy period has expired and the product is within warranty the customer shall submit a claim to D Link as outlined below The customer must submit with the product as part of the claim a written description of the Hardware defect or Software nonconformance in sufficient detail to allow D Link to confirm the same 72 MI The original product owner must obtain a Return Material Authorization RMA number from the Authorized D Link Service Office and if requested provide written proof of purchase of the product such as a copy of the dated purchase invoice for the product before the warranty service is provided lll After an RMA number is issued the defective product must be packaged securely in the original or other suitable shipping package to ensure that it will not be damaged in transit and the RMA number must be prominently marked on the outside of the package Do not include any manuals

D-Link Wireless 3-Port Print Server Retail (DSDLDP313) Print Server

Contents

Download Pdf Manuals

Related Search

Related Contents