Home

Samsung DVD-V3800 DVD Player / VCR Combo

image

Contents

1. 160 min 8 9 10 111213 1415 17 18 19 AUDIO CD e CD is recorded as a Digital Signal with better COMPACT audio quality less St E RU 1 DVD DECK 12 PLAY PAUSE DIGITAL AUDIO deterioration of audio 2 DVD OPEN CLOSE 13 FAST FORWARD FWD quality over time 3 VCR DECK 14 RECORD 4 CHANNEL v A 15 EZ VIEW 5 DVD VCR SELECT 16 FRONT PANEL DISPLAY 6 PROGRESSIVE 17 LINE IN 2 COMPOSITE VIDEO JACK 7 VCR EJECT 18 LINE IN 2 LEFT AUDIO JACK 8 POWER 19 LINE IN 2 RIGHT AUDIO JACK 9 MULTI MEMORY CARD SLOT Disc Markings 10 STOP 11 REWIND REV DIGITAL NTSC gapo STEREO SOUND dts mre e Play e NTSC broadcast Dolby e Stereo disc Digital e DTS disc MP3 disc Region d au i oA Digital disc Audio disc Number Japan el 4 Play Region Number J Both the DVD player and the discs are coded by region These regional codes must match in order for the disc to play If the codes do not match the disc will not play The Region Number for this player is described on the rear panel of the player Rear Panel DVD Only DVD amp VCR DIGTAL AUDIO OU ER ANAN S VIDEO OUT OPTICAL S VIDEO OUT DIGITAL AUDIO OUT COAXIAL DIGITAL AUDIO OUT OPTICAL COMPONENT VIDEO OUT AUDIO LINE OUT TO TV S VIDEO OR COMPONENT a fF ON AUDIO O O ON OD IN FROM ANT VIDEO rAUDIO R L LINE IN 1 LINE OUT TO TV COMPOSITE RF ANTENNA INPUT RF OUT TO TV Front Pane
2. 53 Auto Play AD Record Safety Tab VCR Setup SETUP Tape Length T 120 gt Auto Play On gt Auto Repeat Off ENTER RETURN MENU VCR Setup Tape Length T 120 gt Auto Play On Auto Repeat Off BiENTER RETURN E MENU VCR Setup Tape Length T 120 gt Auto Play On Auto Repeat Off ENTER RETURN MENU If you want your videotapes to play automatically when you insert them turn on Auto Play NOTE Only tapes that are missing the Record Safety Tab will play automatically when inserted Open the MENU With the DVD in Stop or Play mode press the MENU button Select VCR Using the Up Down buttons move the selection bar to VCR then press ENTER to select Select Tape Length Press the RIGHT button to select the video cassette length This information is usually printed on the tape box The menu cycles through T120 T160 or T180 Once the type of cassette is set the VCR can display the amount of time remaining on the tape when you press the INFO button Select Auto Play Move the selection bar to Auto Play then press right to select from the following options On The VCR will automatically begin playing a video tape when it is inserted as long as the safety tab of the cassette has been removed Off Auto play is disabled Select Auto Repeat Move the selection bar to Auto Repeat sets the VCR to play a tape
3. gt Instruction Manual DVD V3800 POWER LINE IN2 E Hes ya Dies fates VIDEO AUDIO Pao m S MULTI MEMORY CARD zm E El Eta I Hi Fi WWW samsungusa com WARNING TO PREVENT DAMAGE WHICH MAY RESULT IN FIRE OR ELECTRIC SHOCK HAZARD DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE WARNING TO AVOID HAZARDOUS EXPOSURE TO INVISIBLE LASER RADIATION DO NOT OPEN OR REMOVE DEFEAT LASER TRANSPORT PROTECTIVE HOUSING CAUTION USE OF ANY CONTROLS ADJUSTMENTS OR PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE USER INSTALLER CAUTION Your authority to operate this FCC certified equipment could be voided if you make changes or modifications not expressly approved by the manufacturer who is responsible for compliance with Part 15 FCC rules NOTE TO CATV SYSTEM INSTALLER This reminder is provided to call the CATV system installer s attention to Article 820 40 of the National Electronic Code that provides guidelines for proper grounding and in particular specifies that the cable ground shall be connected to the grounding system of the building as close to the point of cable entry as practical h CAUTION DO NOT OPEN CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL This symbol is intended to ale
4. Channel Add Delete Move the selection bar to Channel Add Delete then press ENTER to select 5 Select Channel to add delete Use the CH v buttons to tune in the channel number you wish to add or remove 6 Select Channel Add Delete Press right to add or press left to remove the channel from your channel list Repeat steps 4 and 5 to add or remove additional channels Front Panel Dimmer You can set the Front Panel Display to be bright all the time dim all the time or dim during power off 1 Open MENU With the DVD in Stop or Play mode press the MENU button 2 Select SETUP Using the UP DOWN buttons move the selection bar to SETUP LEAR TUGR peene then press ENTER to select 3 Set Front Display Initial Setup Move the selection bar to Front Display then press right to select Language English from the following options Clock gt Channel Auto Front Panel Display will dim automatically during Front Display gt Auto Power Off gt power off Bright Front Panel Display will be bright all the time Dim Front Panel Display will be dim all the time BIENTER RETURN MENU Initial Setup Language English gt Clock gt Channel gt Front Display Auto gt Auto Power Off Off gt BiENTER RETURN ES MENU Initial Setup Language English gt Clock gt Channel gt Auto Front Display Auto 4 Bright Auto Power Off Off gt Dim GIiE
5. Disc Menu English gt Audio English gt Subtitle Automatic gt GIENTER RETURN ES MENU Subtitle Language Automatic English Subtitle Francais Deutsch Espanol Italiano Nederlands Others BiENTER RETURN E MENU 26 To set the Subtitle Language to your preferred language follow these steps If your preferred language is available on a DVD your Subtitle Language will automatically be set to the language you choose Open MENU Press the MENU button while the DVD is in Stop mode Select DVD Use the UP DOWN buttons to highlight DVD then press the ENTER button Select Language Move the selection bar to Language then press ENTER to select Select Subtitle Highlight Subtitle then press the ENTER button Set Subtitle Language Preference Highlight your preferred language for subtitles then press the ENTER button Digital Output If your A V receiver is equipped with a Dolby Digital decoder your DVD VCR can output Dolby Digital 5 1 sound but you MUST enable this feature in the menu system to prevent damage to your speakers NOTE Select Bitstream ONLY if you have connected a Dolby Digital equipped A V receiver to the Digital Output optical or coaxial on the DVD VCR back panel 1 Open MENU Press the MENU button while the DVD is in Stop mode 2 Select DVD Use the UP DOWN buttons to highlight DVD then press the ENTER button 3 Select Audio Highlight Audi
6. move the selection bar to SETUP then press ENTER to select 3 Select Clock Use the UP DOWN buttons to highlight Clock then press the ENTER button 4 Select Manual Clock Move the highlight to Manual Clock then press the ENTER button The Clock Set Adjust menu will change as shown 5 Set the Clock Use the Left Right buttons to select each of the following options then use the UP DOWN buttons to set each option e Hour Set the hour e Minute Set the minute Month Set the month e Day Setthe day e Year Setthe year 6 Confirm Settings Press the RETURN button to confirm your clock settings and to return to the Setup Menu Press the RETURN button again to exit Tuner Band Setting This feature allows you to manually set the DVD VCR s tuner band to Antenna or Cable whichever you connected to the Antenna In jack during initial setup Use this setting only if Auto Setup detected the incorrect tuner band i e channels are coming in on the wrong channel numbers 1 Open MENU With the DVD in Stop or Play mode press the MENU button 2 Select SETUP Using the UP DOWN buttons move the selection bar to SETUP then press ENTER to select 3 Select Channel Using the UP DOWN buttons move the selection bar to Channel then press ENTER to select 4 Select Ant Cable Move the selection arrow to Ant Cable then press right to select from the following options lt
7. rain or moisture does not operate normally or been dropped Table of Contents aevo MR TP ee aa dean bene tae eet es ou med dur oa coms ake T 2 a Important Safety Instructions sas dy irradia rada ista 2 ANGGONG oo Saree mae AAA ie E 7 gt FESTUS SUMAS ais a aon eins oto eis we ien ce ae at Ob Eire be ele d ut 7 UNIDAS UE ER RA 7 Disc Type and CharaCienSucsS cia ARA RA 8 _1 Sysiem OVverview Gaon ed chad oes td aaa Rn dare dS aaa a da Ra FoU RU a S 9 a Front Panel OVerVIEW s 22 ia Tau ROME REGE TAE e AREE SAM 9 Eo Ga A E oput EUR mea die Beta ae qois Ra 10 a Front Panel Display os ccs ose OR EA ER E EERE RE EA 10 EMO CONTO OVelVIBW acest os Pee welt PON bua TEREE PO at PO 11 m Insert Batteries into Remole eee A ds 11 m Using the TV Buttons on the Remote Control 0c 12 9 2 G6lUDg Started adeo trata MAR oe e OR AOR Sew eee OES a Ja ras ea a a es 13 u Basie Connecions AULG Setup s iss ei ee ee Sos EA 13 3 Basic OPC lO roo Ara 14 a Deck Control BUS sacada aaa ra a dad 14 m Basic DVD Operdtion estaria caro ii laa 14 m Basic VCR Operation iiu eem deni EE Go MER Eu die RAE io RR OR Ern RR ae gages 15 ug Basic LV Turner Opera ons sai sk aaa a AE EEE oe RENE ES 16 SS O A dae ka dide E Raed iso Ra AC Bub dead d nd idet Ra e D ee 16 a On Screen Menu Navigation ses 2402 av ES Ee Coe ee ERE EFE ES 16 a Menu tangaga MEET 17 a Manual Glock S8E us ia TRI te tee uet a yo eee a y See tw xS de LE EX es
8. to a SERES AA 41 E A tob RO eai iento seo la a dado do les da dle do les dea dele a eee ae 42 mm Repeat Ghapler Title loco reee ina Dan E Ra Bn BER Ba E a Ba RE 43 m AUdO cS e NAN e A A NR NG Nn BAN Ue itcr sa 43 mi Bookmarks aaa aa a eS SS A SS A eid 44 m How to insert Memory Card eot eo ER ane OON E PRSE MEETS 45 a MPSANMADPIA cn UE Borie a a Da a Se Bate Oo ee o tas AXE EX 46 m Program Play amp Random Play AAA AAA AAA 48 a JPEG Play Data tido ER a E Re ee Ree SA A EE 49 ec Piel wet ike e eres ere UIN EUER I ERIT C UI C 51 WH H UDcdon VD kaka ag E Eh Ba AR ae eee eh Ba ee ee KB a RR du dus 52 9 8 VOR Playha k a iere t a dean e A A 53 m Special VCR Playback Features 2 ent screenees ete ee ee sae ix EE EE pau ud 53 a DISCI ic ciate ES EE athe Md A 53 MEO Aah ss do ate ons ra e e o e oh She UL T 54 E S VHS Playback es naseer Reh hee EA Ata A ad Es 54 m Variable Search System corria ii A Tus 55 Table of Contents 92 VCR Recording MERC 56 m Basic Hecordint iss si RR ERRRRRERREERREEREGESRRRSSRRENREEKETRXERRESRRRREEEE 56 m Special Recording Features 0 0 el 57 m One Touch Recording OTR oe os ead dGses eee ses Sees 36220 eee 2S 58 m Record Speed iia pad di ieee the eee es ew eee 58 _10 TimerRecording eger m a aerae he bard eed de an adr a d 59 m Howto Seta Timer Recording a ee eee 59 EU COHEbLIS RU PETEERTTORELTETITIEMTTITITOUTTTESUTDUDSTTETETST
9. you should set the clock manually See page 18 4 Turn On your DVD VCR Turn on the power by pressing the POWER button on the remote control or on the front panel of the unit 5 Turn On your TV Turn on the TV by pressing the POWER button 6 Set the TV to Channel 3 4 or Line The same channel you selected in Step 2 above must be used If you are using the Line Connection method set your TV to its Line Input 13 Deck Control Buttons 4 amp 3 SHUTTLE Cm E o gt KA a VIEW SELECT The DVD VCR uses one set of controls to operate both decks The following buttons are helpful in successfully controlling each deck 1 POWER Button Press the POWER button on the remote control or front panel to turn on the DVD VCR 2 DVD Button Press the DVD button on the remote control or front panel when you want to control the DVD deck The DVD indicator will light on the Front Panel Display to show that the DVD deck is selected 3 VCR Button Press the VCR button on the remote control or front panel when you want to control the VCR deck The VCR indicator will light on the Front Panel Display to show that the VHS deck is selected 4 INPUT SEL Button Press the INPUT SEL button repeatedly to cycle through all of your input sources including the Tuner Ch Line 1 rear AV input and Line 2 front AV input Input select is only available when
10. 60 Appendix A Advanced Connections nasasa aaaea eee 61 S Video Component Video Connections for DVD aaa 61 m Stereo Connections REREERFRELINRGG EE EEERAREWEREREERESAEPEEREERSAES 62 m Monitor TV Connections eee ee see EG REZREEREFERIQRARERGEZEURNXINE ZEE 63 m Connecting Other Video Equipment 000 eee 64 Appendix B Help eese sexus e ec teen da c ewes eee eed See ee oa 65 m Technical Specifications 222 peseeieRemes ei EREPEESEREEREEUSLERESERPXRRLPRSsRS P Pee 65 Feature Summary DVD VCR Features Perfect compatibility to play back DVDs audio CDs MP3 discs or VHS Tapes Enjoy a DVD movie while recording a TV show to the VCR Auto Setup instantly finds the time and runs channel search RF inputs and outputs for all kinds of TVs available Composite S Video and Component Video outputs Universal remote provides the full operation on DVD VCR On Screen Program English French Spanish DVD Features 10 bit video digital to analog converter and 27MHz advanced digital filter Playback of 96KHz 24 bit sources DTS digital output for DTS enhanced DVDs Playback MP3 CDs 4 in 1 slot to support 4 kinds of Memory Card Memory Stick SD Card MMC and Smart Media Card VCR Features Hi Fi Stereo VCR Superior slow motion and stop action with 4 heads Playback of S VHS tapes with a better than standard resolution INTRO Scan Zer
11. Antenna Indicates that the DVD VCR is connected to an indoor or outdoor VHF UHF antenna lt Cable TV Indicates that the DVD VCR is connected to Cable TV DVD VCR PROG FUNC e REC CLEAR TV VCR DISC MENU gt Initial S Language English Clock Channel Front Display Auto Auto Power Off Off ENTER RETURN MENU Initial Setup Language English Clock Channel Front Display Auto Auto Power Off Off B ENTER RETURN EBMENU Initial S Language English Clock Channel Front Display Auto Auto Power Off Off ENTER RETURN EBMENU Channel Ant Cable Antenna RF Output CH 3CH Auto Channel Memory Channel Add Delete B ENTER RETURN ES MENU 1 etup gt gt gt gt gt gt gt gt gt gt etup gt gt Ld gt gt 9 RF Output Channel Auto Channel Memory Auto Channel Memory will automatically seek and store all active Open MENU channels in your area With the DVD in Stop or Play mode press the MENU button 1 Open MENU Select SETUP W h h DVD Pl h MENU b tt f REC CLEAR TV VCR DISCMENU Using the UP DOWN buttons move the selection bar to SETUP Me PEE Sep or Pay modes A then press ENTER to select 2 Select SETUP Using the UP DOWN buttons move the selection bar to SETUP Initial Setup select Channel then press ENTER to select Language English es mem Using the UP DOWN buttons move the selectio
12. DVD is in Stop mode 2 Select DVD ENTER RETURN ao MENU 1 Open MENU A m BRENTER S RETURN im MENU Press the MENU button while the DVD is in Stop mode Use the UP DOWN buttons to highlight DVD then press the ENTER button 2 Select DVD DVD Setup 66 Use the UP DOWN buttons to highlight DVD then press the oe eee mes z ENTER button Highlight Audio then press the ENTER button TE Displa 4 i seis 4 Set Dynamic Compression anal 3 Select Audio Highlight Audio then press the ENTER button Highlight Dynamic Compression then press the RIGHT button to select one of the following options eae 4 Set DTS On This will compress the total dynamic range of the DVD E Highlight DTS then press the RIGHT button to select one audio making quiet passages in the audio signal louder and of the following options loud passages softer Off To use your DVD TV with an A V receiver NOT equipped A IS Wil preserve the original dynamic fange DVD Setup Solan with a DTS decoder Language gt ce On To use your DVD TV with an A V receiver equipped with a vm x Display gt Parental DTS decoder Parental gt ENTER RETURN MENU B ENTER RETURN MENU Audio Setu p Audio Setup Digital Output DTS Dynamic Compression PCM Down Sampling Digital Output PCM gt DTS Off gt Dynamic Compression On gt gt gt gt PCM Down Sampling On ENTER RETURN
13. MENU BI ENTER RETURN MENU 28 29 PCM Down Sampling Initial Setup Language English Clock Channel Front Display Auto Auto Power Off Off BIENTER RETURN EBMENU DVD Setup Language Audio Display Parental ENTER RETURN E MENU Language Audio Display Parental BRENTER RETURN MENU Audio Setup Digital Output DTS Dynamic Compression PCM Down Sampling gt BiENTER RETURN MENU 30 gt gt gt gt gt gt gt gt gt If your amplifier is not capable of reproducing a 96kHz signal PCM downsampling should be set to on Open MENU Press the MENU button while the DVD is in Stop mode Select DVD Use the UP DOWN buttons to highlight DVD then press the ENTER button Select Audio Highlight Audio then press the ENTER button Set PCM Down Sampling Highlight PCM Down Sampling then press the RIGHT button to select one of the following options On When a 96K audio disc is played 96K will be downsampled to 48K and outputted Off When a 96K disc is played 96K will be outputted TV Aspect Ratio Set the aspect ratio length x width of your TV screen so the DVD player will display movies at the appropriate size for your television Choose from standard letterbox or widescreen format 1 Open MENU Press the MENU button while the DVD is in Stop mode 2 Select DVD Use the UP DOWN buttons to highlig
14. block playback of DVDs based on their content The system uses an Display eight level rating system juo e If you try to play a DVD that exceeds the selected rating an error message will appear Not all discs are rated To take full advantage of the movie theater experience that DVD offers you may want to connect your DVD VCR to a complete Surround Sound system including an A V Receiver and six Surround Sound speakers COMPONENT VIDEO OUT DIGITAL AUDIO QUT Before You Begin ENTER RETURN MENU Y Open MENU f your A V receiver is equipped with a Dolby Digital Decoder Press the MENU button while the DVD is in Stop mode you have the option to bypass the DVD VCR s built in Dolby mE 2 Select DVD Digital Decoder Use the DIGITAL AUDIO OUT connection To Digital Audio Input of an A V la Receiver with a Dolby Digital t Use the UP DOWN buttons to highlight DVD then press the aid LU NS Parental ENTER button 1 Digital Audio Out Connect EITHER an optical cable OR a digital coaxial cable from the DIGITAL AUDIO OUT jacks on the back panel of the DVD VCR 3 Select Parental Highlight Parental then press the ENTER button BieNTER RETURN MENU 4 Select Use Password to their corresponding Digital Audio Input jacks on your A V Highlight Use Password then press the RIGHT button to select Receiver Parental Setup one of the following options Optical Use Password of lt Coaxial Off No password is necessary
15. external device then press the INPUT SEL button until the playback from LINE1 rear panel inputs or LINE2 front panel inputs appears on your TV screen 3 Record Device First play your external device Next press the INPUT SEL button until the playback from LINE1 rear panel inputs or LINE2 front panel inputs appears on your TV screen Then press Record on the VCR deck REC CLEAR TVNCR DISC MENU 4 Timer Record From Device Select LINE1 L1 or LINE2 L2 as your record source in the Timer Record menu All other Timer Record settings should be set in the usual manner EZ VIEW MODE ANGLE MARK E O RESPONSE 96 48 kHz Sampling 4 Hz 22kHz A RATIO 110 dB DAGANGE o RANGE 96 dB TD o 0 003 96 POWER Su TT 120V AC 60 Hz 25 watts SYSTEM A 41 104 F 5 40 C 1096 7596 humidity Channel 3 or 4 LM SYSTEM 1 2 inch VHS system 4 rotary head helical scanning FM azimuth luminance chrominance converted sub system phase shift RM TRACK Normal 1 track Hi Fi 2 track RM TIME T 180 tape SP 3 hours SLP 9 hours FFREWTME TIME T 120 tape 2 minutes Video DA 4 rotary Audio 2 rotary heads Hi Fi 1 stationary head Linear Control 1 stationary head Erase 1 full track 1 audio track Eo amp FLUTTER Less than 0 005 Hi Fi FREQ RESPONSE RESPONSE 20 20 000 Hz Hi Fi DISC COMPATIBILITY CD CD R CD R W DVD Video CD Digital Audio 5 and 3 5 MP3 files on CD ROM WEIGHT pe 7 9 lbs DIMENSIONS
16. if it is missing the Record Safety Tab and Auto Play is turned on See page 54 3 Stop Playback Press the I STOP button on the remote control or on the front panel of the unit Record Safety Tab 4 EjectTape Press the OPEN CLOSE button on the remote control or the EJECT button on the front panel of the unit 5 Additional VCR Options See pages 53 55 for special VCR Playback features See pages 56 58 for VCR Recording features See page 59 for Timer Recording features 15 REC CLEAR TVNCR DISC MENU EZ VIEW MODE ANGLE IARK SPEED REPEAT TIMER amp 3 SHUTTLE quim quim es TV MUTE a VIEW mm SELECT emn TV MUTE Qe am VIEW SELECT Initial Setup Language English Clock Channel Front Display Auto Auto Power Off Off GIiENTER RETURN EBMENU gt gt gt gt gt Basic TV Tuner Operations When watching TV using the DVD VCR s built in TV tuner use the buttons below 1 TVNCR Press this button to switch between your TV s tuner and the VCR s internal tuner You don t need to press the TV VCR button in VCR mode 2 Channel Up Down Use these buttons to move to the previous or the next channel 3 0 9 Buttons Use these buttons to select the desired channel directly 4 100 Button Press this button to tune to channels 100 an
17. in Stop mode 2 Select DVD Use the UP DOWN buttons to highlight DVD then press the ENTER button 3 Select Display Highlight Display then press the ENTER button 4 Set Alt Video Out Highlight Alt Video Out then press the RIGHT button to select one of the following options S Video Select this if you are using the S Video OUT jack on the rear panel to connect to a TV Component Select this if you are using the COMPONENT VIDEO OUT jacks on the rear panel to connect to a Progressive 480p or Interlaced 480i TV See your TV owner s manual to determine what type of TV you have Interlace Interlaced Scan mode will work Progressive Progressive Scan mode will work and Video and S Video will not work Press the Progressive button on the front panel if you have a Progressive scan TV only Otherwise the picture will be disturbed Initial Setup Language English gt Clock gt Channel gt Front Display gt Auto Power Off gt ENTER RETURN ESMENU Language Audio Display Parental BiENTER RETURN MENU DVD Setup Language gt Audio gt Display gt gt Parental BIENTER RETURN LATI Display Setup TV Aspect Black Level Alt Video Out S Video ENTER RETURN EBMENU Alt Video Out S Video Component Interlace Progressive ENTER RETURN MENU 33 AN Re cewe DIO MM Rating Control is a password protected system that allows you to miss
18. next page In case of multiple folder in the same media press the RETURN button to select a folder as you wish and press the ENTER button Program Random playback With the MP3 in Stop mode press the MODE button to switch between the RANDOM and PROGRAM modes See page 48 for more information on these modes e Press the REPEAT button to hear only music continuously and press it once again to release PROGRAM RANDOM playback cannot be used if the disc contains more than two types of file extensions MP3 WMA Play CD R Memory Card MP3 WMA When playing CD R MP3 or WMA discs please follow all the recommendations for CD R above plus the comments below Your MP3 or WMA files should be ISO 9660 or JOLIET format CD R ISO 9660 format and Joliet MP3 or WMA files are compatible with Microsoft s DOS and Windows and with Apple s Mac These two formats are the most widely used lt Memory Card with only FAT16 format can be played e When naming your MP3 or WMA files do not exceed 8 characters and place mp3 wma as the file extension General name format of Title mp3 or Title wma When composing your title make sure that you use 8 characters or less have no spaces in the name and avoid the use of special characters including Use a decompression transfer rate of at least 128 Kbps when recording MP3 files Sound quality with MP3 files basically depends on the rate of compression decompression you cho
19. repeatedly unless a tape control is activated stop fast forward or rewind S VHS Playback The DVD VCR allows you to playback high quality S VHS tapes 1 Insert a S VHS Tape Insert an S VHS tape into the VCR deck 2 Start Playback Press Play Pause on the remote control to begin playback of the S VHS tape 54 Variable Search System Press the SEARCH button to display the search screen in the stop mode When a program is recorded the starting point is given an Index mark for easy location However the VHS Index Search System VISS cannot recognize index marks made by old VCRs If the VCR has trouble finding a mark it is probably because the cassette was recorded on a VCR without VISS If you want to index two programs in a row set your VCR to stop then start recording each program Pause has no effect on index marks 1 Goto 0 00 00 stop Use this feature when you want to search for the 0 00 00 counter position on a cassette Press the CLEAR button at the point on the tape where you want to set the counter to 0 00 00 While a cassette is stopped press the ENTER button The VCR will rewind or fast forward searching for the 0 00 00 counter position and then automatically stop at that position 2 End search Use this feature when you want to search for a blank position to record a program on a cassette While a cassette is stopped press ENTER button The VCR will fast forward searching for a blank position and then au
20. the next frame Press the INFO button to see the current status of the VCR deck as well as the tape counter position and record speed 3 Cue Review From Play mode press F Forward b gt or Rewind to cue review at two speeds Picture Search Press and release to advance the tape forward or backward at 5 times normal speed Jet Search Press and hold to advance the tape forward or backward at 7 times normal speed 4 Skip From Play mode press F ADV SKIP to cue ahead exactly 30 seconds Press Skip repeatedly up to 4 times to cue ahead 2 minutes 5 Repeat From Play mode press Repeat to review the last 5 seconds of tape SP mode From Play mode press Repeat to review the last 15 seconds of tape SLP mode 6 Shuttle From Play mode Shuttle gt gt gradually increases the cue speed from Double Speed playback to Picture Search to Jet Search Shuttle gradually slows down the tape then goes into Slow mode Still mode Reverse Picture Search and Reverse Jet Search The Tracking adjustment removes the white lines that sometimes appear during playback because of slight differences in recording decks The TRK button will automatically align the recorded tracks with the playback heads to solve this problem You may also set tracking manually emm VIEW SELECT 1 Adjust Tracking Manually During playback press the CH TRK A or CH TRK V buttons to remove white lines from the picture
21. to VCR If there is no stereo sound even after you have inserted a Hi Fi stereo videotape press the Audio button until Hi Fi appears on the on screen display REC CLEAR TVNCR DISC MENU EZ VIEW MODE ANGLE SPEED REPEAT TIMER SE 62 63 Connecting Other Video Equipment Technical Specifications You can connect a wide variety of audio video equipment to your DVD VCR including e An additional VCR AUDIO 2 Stereo audio inputs RCA Connector 8dbm 47KQ To e a front and rear i ayer OD e FROM ANT e dE ani e Camcorder ER oo 2 Composite video inputs RCA Connector 750 1Vp p Y Satellite Receiver Antenna or CATV Input F Connector 750 DO amp A e Video Game M E Since all of these devices use essentially the same connections they ts 3 1 Stereo audio outputs RCA Connector 8dbm 1 5KQ ni will be described together LM DVD only 2 Digital audio outputs 1 optical 1 coaxial TV Audio Video Outputs of 1 Stereo audio outputs Ed A das 1 Connect Device to DVD VCR VIDEO 1 Composite video output RCA Connector 750 1Vp p Connect RCA cables from the Audio and Video Line Outputs of VIDEO DVD only E uc Conner TRU VERON CINE En your external device to the Audio and Video Line Inputs on the oniy vIdeo output o Conn Y 1 UVp p en k eJ front or back panel of the DVD VCR C 0 286Vp p ean s T T ee 1 Component video output 750 Y 1 0Vp p Pb 0 7Vp p G 2 Watch Device Pr 0 7Vp p Play your
22. 18 a Tuner Band Seung dels tesoro atadas ia cb tas E EE es 19 a RF Outp t Channels ss sou cece sect Ba a AE 20 a Auto Channel Memory a Seas as e o 21 a Channel Add Delele s x tx Ta risa tna 22 m Front Panel DIMmMmeEr RR EE ER a EM de RA e CILE ah sae ee vla Ri 23 E JAUIO POWOL ORB S sairis sea Sie RR NET ERRARE NN SS AGNES 24 4 Table of Contents OR DA INODORO AE AS do 25 m Disc Menu Language E A awe ieee eae aaa aaa ee 25 E AIO Language saa ai a aaa aa ka Bp Bn Bn Ba AD SI ERO I IBS a 25 m SubtitlelLanguage AS MUT 26 a DIOtacO MUELA BANA E RS care iS ea taeda Zk 27 Be Ee QU Tnnc 28 u Dynamic Compressi covers da rra rs da a EA 29 a PCM Down Sampling ds cua du E IA AAA A 30 TN Aspect allo ka e e E a e E A e 31 LES 4527 estes sara ed oras nada laa las e la edo lo o de 32 m Alt Video Out E A E E E E LS LUE 33 LEE u gc TT ML 34 9 6 DVD Sound Setup deem io os E aa ed ERE X 2 BORRAR EO CRT ed es 35 m AN Receiver Connections sra UTPLPe te PU VPE IHECHHNCI Tr Ww 35 7 DVD Operalions ee a GRANGE E M eee wo KOCH GEN Ge E aas 36 m Special Playback Features tora ow be Eby TEN EN Pee EOS TENE 36 a EES SILT ALIN VIG OM si rm 37 PNE PURI ah O ea a eS aa UE III IE 37 m Tile Ghapter Time Seleciion aaa aa deus AA 39 au ndis WOW ad iraga ae da eT ae tenes ga DUMP ar gana AS re Th a E RS Ga aa 40 E SUDHUNG
23. ANGLE SPEED REPEAT TIMER 2 Press A V or 4 gt to navigate through DVD s Disc menu options Press up down left and right to highlight menu choices 3 ENTER Button Press to make your selections in the Disc menu CLEAR TVNCR DISC MENU MODE ANGLE MARK 1 Press the EZ VIEW button The screen size changes when the button is pressed repeatedly CLEAR TVNCA DSOMENV The screen zoom mode operates differently depending on the ci gt screen setting in the initial setup menu gy e To ensure correct operation of the EZ VIEW button you should set the correct aspect ratio in the initial setup See the page 31 2 If you are using a 16 9 TV For 16 9 aspect ratio discs Wide Screen Displays the content of the DVD title in 16 9 aspect ratio Screen Fit The top and bottom of the screen are cut off When playing a 2 35 1 aspect ratio disc the black bars at the top and bottom of the screen will disappear The picture will look vertically stretched Depending on the type of disc the black bars may not disappear completely Zoom Fit The top bottom left and right of the screen are cut off and the central portion of the screen is enlarged 37 38 3 gt For 4 3 aspect ratio discs lt Normal Wide Displays the content of the DVD title in 16 9 aspect ratio The picture will look horizontally stretched Screen Fit The top and bottom of the screen are cut off and the fu
24. Chapter When you select Chapter Repeat Chapter will be highlighted Olor RATA 3 Repeat Chapter Press the ENTER button to repeat the current chapter or track 4 Select Title Use the LEFT RIGHT buttons to select Title When you select Title Repeat Title will be highlighted CD 5 Repeat Title Press the ENTER button to repeat the title Olor Track Disc A B DVD Multiple language audio setup options such as Dolby Digital 5 1 Dolby Pro Logic or LPCM 2 Channel audio are available on some DVDs You can use the AUDIO button to quickly view and select the options available on a disc ENG DOLBY DIGITAL 5 1CH 1 Openthe Audio Menu During playback press the AUDIO button on the remote control 2 Select DVD Audio Track CD Use the LEFT RIGHT buttons to select the desired language audio setup on the DVD Languages are represented by abbreviations e g ENG for English Memory Card with FAT16 can be played under the capacity of 2GB 44 Up to three Bookmarks can be inserted for a given DVD allowing you to quickly jump to your favorite scene or song 1 Open Bookmark Menu During playback press the MARK button on the remote control The MARK header will be displayed on the screen CLEAR TVNCR DISC MENU HN E E d 2 Select Bookmark Placeholder FER CINES em Use the LEFT RIGHT buttons to move to one of the three bookmark placeholders The selected placeholder will
25. HE ORIGINAL PURCHASER OF THIS PRODUCT IS NONTRANSFERABLE AND STATES YOUR EXCLUSIVE REMEDY Some states do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of incidental or consequential damages so the above limitations or exclusions may not apply to you This warranty gives you specific legal rights and you may also have other rights which vary from state to state To obtain warranty hardware service please contact SAMSUNG at SAMSUNG CUSTOMER CARE CENTER 400 Valley Road Suite 201 Mt Arlington NJ 07856 Tel 973 601 6000 Fax 973 601 6001 1 800 SAMSUNG 1 800 726 7864 and www SAMSUNGUSA com 66 SAMSUNG ELECTRONICS AMERICA INC HEADQUARTERS 105 Challenger Road Ridgefield Park N J 07660 0511 TEL 1 800 SAMSUNG SERVICE DIVISION 400 Valley Road Suite 201 Mount Arlington NJ 07856 1 800 SAMSUNG 1 800 726 7864 www SAMSUNGUSA com ELECTRONICS AK68 00222A
26. NTER RETURN Hd MENU 23 Auto Power Off Disc Menu Language To set the Disc Menu Language to your preferred language follow these steps If your preferred language is available on a DVD your Display 1 Open MENU Disc Menu Language will automatically be set to the language you Parental With the DVD in Stop or Play mode press the MENU button choose 2 Select SETUP Using the UP DOWN buttons move the selection bar to SETUP then press ENTER to select CLEAR TVNCR DISC MENU gt gt gt MODE ek 3 Set Auto Power Off Move the selection bar to Auto Power Off then press right to FINES select from following options Language English gt Off Auto power off is disabled ue gt 1Hr DVD VCR will auto shut off 1 hour after the last button is Front Display Auto gt pressed Auto Power Off Off 4 lt 2Hr DVD VCR will auto shut off 2 hours after the last button is pressed MENTER RETURN MENU Initial Setup Language English gt Clock gt Channel gt Front Display gt Auto Power Off gt BiENTER RETURN MENU Open MENU Press the MENU button while the DVD is in Stop mode Select DVD Use the UP DOWN buttons to highlight DVD then press the ENTER button Select Language Move the selection bar to Language then press ENTER to select Select Disc Menu Highlight Disc Menu then press the ENTER button Set Disc Menu Language Preference Highlight your
27. NTER button is pressed the picture is enlarged up to 4X Normal 2X gt 4X 2X gt Normal The unit enters slide show mode Press the DISC MENU button in Normal mode to see the Menu screen mm VIEW am ga CH TRK VOL M CARD C INPUT SEL v F ADV SKIP gt gt gt Select a Media Type 1 MP3 2 WMA PHOTO 1 1215 ESIS fu 49 JPEG Playback The 3D Sound function is a sound enhancement mode that lets you enjoy virtual surround sound with only two speakers 6 Select the Slide Show and press the ENTER button 1 Press the INFO button TIE 616 to start the slide show with a selected time During playback press the INFO button on the remote control When this icon is selected and ENTER is pressed D the pictures change automatically with within an 10 second interval 2 Set3D Sound The pictures change automatically within 20 second Use the UP DOWN buttons to select 3D Sound interval 5 The pictures ae automatically with about an 3 Use the LEFT RIGHT buttons to confirm your selection 30 second interval Press the DISC MENU button to see again the MENU BAR ON A surround sound effect is generated using only two front And press the RETURN button to move to the initial Menu Off This function will not work Bar After the slide show Press PLAY amp II button to see the picture ag
28. NU MODE ANGLE MARK SPEED REPEAT TIMER SEARCH DVD Olor Chapter Title A B CD Olor Track Disc A B 42 The A to B Repeat feature enables you to repeat a designated section on a DVD or CD To activate mark where to start A and where to end B of the section you want to watch 1 Select A B Repeat Function Press the REPEAT button while in Play mode then use the Left Right buttons to select A B Repeat When you select A B Repeat A will be highlighted NOTE The menu will display Track in place of Chapter if you are playing a CD 2 Markthe Starting Point Press the ENTER button at the beginning of the segment you want to repeat Point A Once you select Point A B will be highlighted NOTE The minimum A B Repeat time is 5 seconds 3 Mark the Ending Point Press the ENTER button again at the end of the segment you want to repeat Point B The segment will begin repeating in a continuous loop 4 Cancel A B Repeat Press the REPEAT button to open the Repeat Menu use the Left Right buttons to highlight Off then press the ENTER button Repeat Chapter Title You can repeat a single chapter or a complete title 1 Open Repeat Menu Press the REPEAT button while in Play mode to open the Repeat Mid O O gt lt The current Repeat mode will be highlighted NODE MARK SPEED REPEAT SEARCH 2 Select Chapter DVD Use the LEFT RIGHT buttons to select
29. Setup English gt gt gt gt gt ENTER RETURN MENU DVD Function VCR Function Function gt gt BRENTER RETURN Ed MENU Title Menu Disc Menu Information Zoom Bookmark Repeat EZ View DVD Function BiENTER RETURN ES MENU 1 Use this feature to check your DVD Open MENU With the DVD in Play mode press the MENU button Select FUNCTION Use the UP DOWN buttons to highlight FUNCTION then press the ENTER button Select DVD Function Using the UP DOWN buttons to highlight DVD Function then press ENTER to select Select Title Menu Highlight Title Menu then press the ENTER button Disc Menu Highlight Disc Menu then press the ENTER button Information Highlight Information then press the ENTER button Zoom Highlight Zoom then press the ENTER button Bookmark Highlight Bookmark then press the ENTER button Repeat Highlight Repeat then press the ENTER button EZ View Highlight EZ View then press the ENTER button Special VCR Playback Features While a videotape is playing you can enjoy a variety of special playback features including Still Frame Advance Skip Repeat and more Press the Play button again to resume normal playback 1 Still From Play mode press Play Pause to still a single frame 2 Frame Advance 0 00 00 SP 8 3 From still mode press F ADV SKIP to advance to
30. To view the current Title Chapter Track and counter position press the INFO button during DVD playback The Information screen can also be used to quickly choose a title chapter track or playing time 1 View the Display During DVD CD playback press the INFO button on the remote control 2 Select title Use the UP DOWN and LEFT RIGHT buttons to select Title then press the ENTER button to change among all available titles on the disc 3 Select Chapter or Track Use the UP DOWN and LEFT RIGHT buttons to select Chapter or Track then press the ENTER button to change among all available Chapters Tracks on the disc 4 Select Counter Position ener Use the UP DOWN and LEFT RIGHT buttons to select the counter position indicator then use the numeric buttons 0 9 to enter the desired counter position in the format H MM SS H Hours M Minutes S Seconds Then press the ENTER button to enter the desired counter position gt To make the screen disappear press the INFO button again To access the desired title when there is more than one in Bi ENTER the disc For example if there is more than one movie on a DVD each movie will be identified KN Most DVD discs are recorded in chapters so that you can Yol quickly find a specific passage Q Allows playback of the film from a desired time You must enter the starting time as a reference Refers to the language of the film soundtrack In the example the soundtrac
31. WxHxD 16 93 x 3 32 x 10 83 inches 64 65 SAMSUNG COMBINATION DVD amp VCR LIMITED WARRANTY TO ORIGINAL PURCHASER This SAMSUNG brand product as supplied and distributed by Samsung Electronics America Inc SAMSUNG and delivered new in the original carton to the original consumer purchaser is warranted by SAMSUNG against manufacturing defects in materials and workmanship for a limited warranty period of One 1 Year Parts and Labor 90 Days Parts and Labor for Commercial Use This limited warranty begins on the original date of purchase and is valid only on products purchased and used in the United States To receive warranty service the purchaser must contact SAMSUNG for problem determination and service procedures Warranty service can only be performed by a SAMSUNG authorized service center The original dated bill of sale must be presented upon request as proof of purchase to SAMSUNG or SAMSUNG s authorized service center Transportation of the product to and from the service center is the responsibility of the purchaser SAMSUNG will repair or replace this product at our option and at no charge as stipulated herein with new or reconditioned parts or products if found to be defective during the limited warranty period specified above All replaced parts and products become the property of SAMSUNG and must be returned to SAMSUNG Replacement parts and products assume the remaining original warranty or ninety 90 days whicheve
32. ain 4 To make the screen disappear press the INFO button again CD R Memory Card JPEG Only JPG Format Files with the jpg and JPG extensions can be played e If the CD R disc is not closed it will take longer to start playing and not all of the recorded files may be played Only CD R discs with JPEG files in ISO 9660 or Joliet format can be played Only Memory Card with FAT16 format can be played Memory Card The name of the JPEG file may not be longer than 8 characters and should contain no blank spaces or special characters Only a consecutively written multisession disc can be played If there is a blank segment in the multisession disc the disc can be played only up to the blank segment CD R Kodak Picture CDs can be played Picture discs other than Kodak Picture CD may take longer to start playing or may not play at all e If the number of files in 1 Disc is over 500 only 500 JPEG file can be played If the number of folders in 1 Disc is over 300 only JPEG files in 300 folders can be played CD R lt If the number of folders in 1 Disc is over 255 only JPEG files in 255 folders can be played Memory Card e It is able to replay the jpg file format up to 5 million dpi captured by a digital camcoder or camcoder It supports all JPG file formats with the capacity of less than 3MB Memory Card 50 51 52 Language gt Clock Channel Front Display Auto Power Off Auto Off Initial
33. and run Auto Setup The Auto Setup will automatically search for channels and then set your DVD VCR s internal clock NOTES e See Appendix A for Advanced Connections AY e Standard RF or Line connections between your TV are required to run DVD VCR setup menu even if you connect S Video or Component Video Output for better picture quality 1 Connect the RF Antenna Cable to your DVD VCR Connect an external indoor outdoor antenna or wall outlet antenna cable to the Ant In jack on the rear panel 2 Connect your DVD VCR to a TV Choose one of the following methods RF Connection Using the supplied RF antenna cable connect the OUT jack TO TV on the back panel of your DVD VCR to your TV s Antenna Input Line Connection Using an RCA type audio video cable red white yellow connect the LINE OUT jacks on the back panel of your DVD VCR to your TV s Line In jacks Use the three cables as follows red for right audio white for left audio and yellow for video NOTE If your TV is equipped with RCA jacks it is better to use the Line Connection method 3 Plugin Your DVD VCR s power should be plugged into a standard 120V 60Hz wall outlet Avoid pressing any buttons on the remote control or on the unit during an Auto Setup While your DVD VCR is running an Auto Setup AUTO will blink When Auto Setup is complete the current time will be displayed on the front panel In case Auto Clock set fails to locate a channel to set the clock
34. be highlighted 3 Set the Bookmark Keep on playing the DVD up to the scene you want to bookmark then press the ENTER button The placeholder will change to a number 1 2 or 3 You may continue to set up to three bookmarks Press the MARK button when complete Depending on the disc the bookmark function may not work 4 Play Bookmark During playback press the MARK button on the remote control Use the LEFT RIGHT buttons to move to a previously set bookmark Press the PLAY PAUSE button to play the bookmark Press the CLEAR button to cancel the bookmark Press the MARK button again to exit the Bookmark menu How to insert Memory Card This device supports 4 kinds of memory card Memory Stick SD Card MMC and Smart Media Card which will be inserted as follows L Memory Stick 2 SD Card 3 Multi Media Card 4 Smart Media Card gt The memory card shall be inserted as shown in the right figure Otherwise it may not operate Type of Memory Card Memory Card Kind Capacity All 4 memory cards File size at present MemoryStick 4MB 128MB 256MB 512MB 1GB Secure Digital Card SD 4MB 256MB Multi Media Card MMC 4MB 128MB Smart Media Card SMC 4MB 128MB Memory Card with FAT16 can be played under the capacity of 2GB gt e If it is not fully inserted the Memory Card will not work If you remove the Memory Card during playback the recorded data may become corrupted I
35. begin recording 2 Activate OTR While in Record mode press the REC button again to activate One Touch Recording OTR Record length 0 30 appears on the On Screen Display and the DVD VCR will record for exactly 30 minutes Record length 0 30 07 3 Add Recording Time Continue pressing REC to add recording time in 30 minute increments up to 4 hours The DVD VCR stops recording automatically when the time has elapsed Record Speed You can slow down the recording speed from SP to SLP in order to fit six hours of programming on a T 120 tape 1 Start Recording Follow the Basic Recording instructions on page 56 2 Set Record Speed Press the SPEED button on the remote control to set the Record Speed to one of the following options REC CLEAR TVNCR DISC MENU EZ VIEW MODE ANGLE MARK SPEED REPEAT TIMER SEARCH SP Standard Play for best quality SLP Super Long Play for maximum recording time 3 times SP NOTE The selected Record Speed will appear on the front panel display and on screen display Maximum Recording Time SP vs SLP Tape Length SP Standard Play SLP Super Long Play T 120 2 hrs 6 hrs T 160 2hrs 40 mins 8 hrs T 180 3 hrs 9 hrs 58 How to Set a Timer Recording Insert a blank videotape into the VCR deck Be sure to leave the Record Safety Tab intact 3 Initial Setup With the Timer Recording function you can program up to 7 US NES events at a time to record up to a m
36. ce the selection bar next to your desired Language then press the ENTER button ENTER RETURN E MENU Initial Setup Language English gt Clock Channel Front Display Auto gt gt gt Auto Power Off Off gt ENTER RETURN MENU Language Language English Francais Espanol BIENTER RETURN Ed MENU Initial Setup Language English gt Clock Channel Front Display Auto Auto Power Off Off gt gt gt gt FUNC gt B ENTER RETURN_ ERMENU 17 Manual Clock Set Initial Setup Language English gt Clock gt Channel gt Front Display Auto Power Off gt BRENTER RETURN E MENU Initial Setup Language English gt Clock gt Channel gt Front Display 2 gt Auto Power Off gt RENTER RETURN MENU Initial Setup Language English gt Clock gt Channel gt Front Display Auto gt Auto Power Off Off gt ENTER RETURN fH MENU Clock Set Adjust Auto Clock Ld Manual Clock gt GIENTER RETURN M MENU Manual Clock Time Date Year 12 00am 1 01 2003 WED BSIENTER RETURN MENU If Auto Setup fails to set the DVD VCR s internal clock by locating a local TV station follow these steps to set the date and time manually NOTE For accurate Timer Recording your DVD VCR s internal clock must be set correctly 1 Open MENU Press the MENU button while the DVD is in Stop or Play mode 2 Select SETUP Using the UP DOWN buttons
37. d above First press the 100 button then use the numeric buttons 0 9 to enter the remaining digits of the channel number desired This button is activated only in Cable TV Mode 5 INFO Button Press this button to display the current channel This also works in DVD and VCR mode On Screen Menu Navigation The on screen menus allow you to enable or disable various functions on your DVD VCR Use the following buttons to open and navigate through the on screen menus 1 MENU Button Press this button while the DVD is in Stop or Play mode to open the on screen MAIN MENU 2 Up Down and Left Right Use these buttons to move the selection bar up down left and right to cycle through the menu options 3 ENTER Button Press this button to confirm any new settings 4 RETURN Button Press this button to return to the last MENU screen displayed or to exit the on screen MENU all together Menu Language To change the on screen MENU language to English French or Spanish follow these steps 1 Open MENU Press the MENU button while the DVD is in Stop or Play mode CLEAR TVNCR DISC MENU 2 Select SETUP Using the UP DOWN buttons move the selection bar to SETUP then press ENTER to select Initial Setup 3 Select Language Language English Use the UP DOWN buttons to highlight Language then press the Clock x ENTER button Channel gt Front Display Auto gt Auto Power Off Off gt 4 Set menu Language Pla
38. et the TV to channel 3 or 4 then select a different channel on your television VOL M CARD e INPUT SEL 4 ToWatch a DVD dii sies Insert a DVD in the DVD deck and press Play The output will Insert a blank VHS tape into the VCR deck automatically change to the DVD FEC CLEAR TUMOR OE Make sure the tape is long enough to record the entire program RIT To change the Recording Speed see page 58 5 Add Recording Time SPEED REPEAT TIMER SE 2 Select a Channel to Record See One Touch Recording OTR on the next page Use the 0 9 buttons or the Channel Up Down arrow buttons to select the desired channel or press the INPUT SEL button to select Line 1 or 2 if recording from an external device connected to ISAMSUNS 4 the front or rear Line inputs respectively Ez CLEAR DISC MENU 3 Start Recording 29 m E ee LO la REC_ EZVIEW pr m Press the REC button on the remote control or front panel an 900000 Vue uw uw For options while recording is in progress see Special Recording Features on the next page gt Recording from the DVD player to the VCR is not possible 56 57 One Touch Recording OTR One Touch Recording OTR allows you to add recording time in 30 minute increments up to 4 hours at the touch of a button RECORD 1 Start Recording Follow the instructions on page 56 to
39. hannel Add Delete gt ENTER RETURN MENU Channel Ant Cable Antenna RF Output CH 4CH Auto Channel Memory Channel Add Delete BRENTER RETURN E MENU Auto Channel Memory B ENTER RETURN MENU Channel Memorizing please wait HENTER RETURN amp MENU 20 21 Channel Add Delete REC CLEAR TVNCR DISC MENU Initial Setup Language English Clock Channel Front Display Auto Auto Power Off Off gt gt gt RENTER RETURN MENU Initial Setup Language English gt Clock gt Channel gt Front Display E Auto Power Off BRENTER RETURN MENU Initial Setup Language English gt Clock gt Channel gt Front Display Auto gt Auto Power Off Off gt GiENTER RETURN EBMENU Channel Ant Cable Antenna gt RF Output CH 3CH gt Auto Channel Memory gt Channel Add Delete gt BIENTER RETURN ES MENU CHANNEL ADD DELETE Select channel 02 and press b to ADD press 4 to DELETE RETURN CH Av Use this feature if Auto Channel Search missed a channel that you would like to add or added a channel you wish to remove 1 Open MENU With the DVD in Stop or Play mode press the MENU button 2 Select SETUP Using the UP DOWN buttons move the selection bar to SETUP then press ENTER to select 3 Select Channel Using the UP DOWN buttons move the selection bar to Channel then press ENTER to select 4 Select
40. he files It supports the MP3 file format in the range from 96BPS to 256BPS This unit can play a maximum of 500 files and 300 folders per disc CD R lt This unit can play a maximum of 500 files and 255 folders per Memory Card 47 Program Play amp Random Play PROGRAM 4 RANDOM PROGRAM 01 02 03 04 06 07 08 10 11 12 14 15 16 PROGRAM 4 RANDOM 48 Program Play CD MP3 WMA 1 With the MP3 in Stop mode press the MODE button 2 Use the LEFT RIGHT buttons to select PROGRAM Press the ENTER button 3 Use the LEFT RIGHT UP DOWN buttons to select the first track to add to the program Press the ENTER button The selection numbers appear in the Program Order box 4 Press the PLAY PAUSE p gt ll button The disc will be played in programmed order Random Play CD MP3 WMA 1 With the MP3 in Stop mode press the MODE button 2 Use the LEFT RIGHT buttons to select RANDOM Press the ENTER button The disc will be played in random order gt Depending on the disc the Program and Random Play functions may not work To resume normal play press the CLEAR button PROGRAM RANDOM playback cannot be used if the disc contains more than two types of file extensions This unit can support a maximum of 99 programmed order JPEG Playback The memory card is played in the same way with the CD R and Photo CD 1 Insert a CD R or Photo CD written JPEG file into the tray and close it In ca
41. he tape speed will automatically change from SP mode to SLP mode 7 Daily Weekly Date Programming Weekly SUN S SAT S Use this to record TV programs on the same channel at the same time every week Daily MO FR Use this to record TV programs on the same channel at the same time every day Monday through Friday 59 60 Initial Setup Language English gt Clock gt Channel gt Front Display Auto gt gt Auto Power Off Off ENTER RETURN Ed MENU Function DVD Function gt VCR Function gt ENTER RETURN MENU VCR Function Go to 0 00 00 End Search Forward Intro Scan Reverse Intro Scan BRENTER RETURN ES MENU Open MENU With the DVD in Stop or Play mode press the MENU button Select FUNCTION Use the Up Down buttons to highlight FUNCTION then press the ENTER button Select VCR Function Using the UP DOWN buttons to highlight VCR Function then press ENTER to select Select Go to 0 00 00 Highlight Go to 0 00 00 then press the ENTER button End Search Highlight End Search then press the ENTER button Forward Intro Scan Highlight Forward Intro Scan then press the ENTER button Reverse Intro Scan Highlight Reverse Intro Scan then press the ENTER button S Video Component Video Connections for DVD Use the S Video or Component Video connection method for the DVD player only The tuner and VCR can s
42. ht DVD then press the ENTER button 3 Select Display Highlight Display then press the ENTER button 4 Set TV Aspect Highlight TV Aspect then press the RIGHT button to select one of the following options Widescreen This method allows you to view the full 16 9 picture on a widescreen television Letterbox This method displays the full width of the widescreen movie on a standard 4 3 television As a result black bars will appear at the top and bottom of the screen lt Pan Scan The familiar way of watching DVD and VHS movies this method selectively crops by panning and scanning to keep the most important part of the picture visible wide screen movies to fit a standard 4 3 television screen Initial Setup Language English gt Clock Channel Front Display Auto Auto Power Off Off gt gt gt gt GENTER RETURN MENU DVD Setup Language gt Audio gt Display gt Parental gt GENTER RETURN MENU DVD Setup Language gt Audio gt Display 4 gt Parental BiENTER RETURN EBMENU Display Setup TV Aspect Black Level Alt Video Out BiENTER RETURN BEBMENU 4 3 Letter Box 4 3 Pan Scan 16 9 Wide RENTER RETURN go MENU 31 Black Level Initial Setup Language English gt Clock Channel Front Display Auto Power Off gt gt gt gt B ENTER RETURN amp MENU DVD Setup Language gt Audio gt Displa
43. ion related to noise echo interference or other signal transmission and delivery problems SAMSUNG does not warrant uninterrupted or error free operation of the product THERE ARE NO EXPRESS WARRANTIES OTHER THAN THOSE LISTED AND DESCRIBED ABOVE AND NO WARRANTIES WHETHER EXPRESS OR IMPLIED INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE SHALL APPLY AFTER THE EXPRESS WARRANTY PERIODS STATED ABOVE AND NO OTHER EXPRESS WARRANTY OR GUARANTY GIVEN BY ANY PERSON FIRM OR CORPORATION WITH RESPECT TO THIS PRODUCT SHALL BE BINDING ON SAMSUNG SAMSUNG SHALL NOT BE LIABLE FOR LOSS OF REVENUE OR PROFITS FAILURE TO REALIZE SAVINGS OR OTHER BENEFITS OR ANY OTHER SPECIAL INCIDENTAL OR CONSEQUENTIAL DAMAGES CAUSED BY THE USE MISUSE OR INABILITY TO USE THIS PRODUCT REGARDLESS OF THE LEGAL THEORY ON WHICH THE CLAIM IS BASED AND EVEN IF SAMSUNG HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES NOR SHALL RECOVERY OF ANY KIND AGAINST SAMSUNG BE GREATER IN AMOUNT THAN THE PURCHASE PRICE OF THE PRODUCT SOLD BY SAMSUNG AND CAUSING THE ALLEGED DAMAGE WITHOUT LIMITING THE FOREGOING PURCHASER ASSUMES ALL RISK AND LIABILITY FOR LOSS DAMAGE OR INJURY TO PURCHASER AND PURCHASER S PROPERTY AND TO OTHERS AND THEIR PROPERTY ARISING OUT OF THE USE MISUSE OR INABILITY TO USE THIS PRODUCT SOLD BY SAMSUNG NOT CAUSED DIRECTLY BY THE NEGLIGENCE OF SAMSUNG THIS LIMITED WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN T
44. k is played in English 5 1 CH A DVD disc can have up to eight different soundtracks Refers to the subtitle languages available in the disc E You will be able to choose the subtitles language or if you prefer turn them off from the screen A DVD disc can have up to 32 different subtitles A surround sound effect is generated using only two front ID speakers Some DVD Movies provide you with various camera Some DVDs provide subtitles in one or more languages You can angle views on the same scene while they are playing use the SUBTITLE button to quickly view and change settings To activate the feature press the ANGLE Button 1 Open Subtitle Menu 1 Check for the Angle Icon During playback press the SUBTITLE button REL AM HUMOR ode Press the Angle button you ll see the Angle Icon when watching a uu uA DVD with multi Angles available SPEED REPEAT TIMER SEARCH 2 Set Subtitle Language Use the LEFT RIGHT buttons to select from the available subtitle 2 View Angle Menu Options languages When the Angle Icon comes up on the screen press the ANGLE Subtitle languages are represented by abbreviations button to see the Angle menu 3 4 6 3 Select an Angle option WE SG 4 Press the LEFT RIGHT buttons to selecta camera angle you wish Use the UP DOWN buttons to turn subtitles On or Off to see The default is On Press the ENTER button to confirm your selection EN c El 40 41 A to B Repeat REC CLEAR TVNCR DISC ME
45. l Display 10 When the light is on DVD is operating DVD or CD media is loaded The time counter position time remaining or current deck status is indicated VHS videotape is loaded VCR is activated A DVD with a DTS soundtrack is loaded The Hi Fi track of a VHS videotape is playing The current TV program or video is broadcast in Stereo Timer Recording is in progress It also blinks when you pause VCR Remote Control Overview OPENCLOSE Remove the battery cover on the remote Insert two 1 5V AAA batteries as shown making sure of the correct polarities Slide the cover back onto remote 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 NOo fF OD POWER SHUTTLE 100 DVD MEMORY CARD VOLUME REWIND SKIP BACK STOP SUBTITLE MENU UP LEFT DOWN CLEAR RECORD EZ VIEW SPEED MODE REPEAT OPEN CLOSE 0 9 TV MUTE AUDIO VCR TV SELECT INPUT SEL F ADV SKIP CHANNEL A V TRACKING A V FAST FORWARD SKIP NEXT PLAY PAUSE INFO RETURN ENTER RIGHT TV VCR DISC MENU MARK SEARCH ANGLE TIMER 11 Using the TV Buttons on the Remote Control amp 3 SHUTTLE OPENCLOSE INPUT SEL VOL uco A m A CH TRK INPUT SEL F ADV SKIP 12 Your VCR remote control will work with Samsung televisions and compatible brands To determine whether your te
46. le parts inside Refer servicing to qualified personnel only CUIDADO Para prevenir incendio riesgo de choque o interferencia enfadosa use solamente los accesorios recomendados Para prevenir electrochoque no use este enchufe polarizado con un cord n de extensi n toma de corriente o cualquier otra toma a menos que los dientes puedan ser completamente insertados para prevenir exposici n de los dientes Para reducir el riesgo de descarga el ctrica no remueva la cubierta o la parte posterior del equipo Dentro del equipo no hay partes que requieren servicio Dir jase solamente a personal calificado cuando requiera servicio ATTENTION Pour viter les incendis risque de chocs ou interf rences f cheuses employer seulement les accessoires recommand s Pour viter les chocs lectriques ne pas employer cette prise polaris e avec une rallonge une prise de courant ou une autre sortie de courant moins que les lames peuvent tre ins r es fond pour l exposition des lames Pour r duire les risques de chocs lectriques ne pas retirer le couvercle ou l arri re du module Il n y a pas de pi ce utilisable l int rieur Ne faire effectuer l entretien que par un personnel qualifi Important Safety Instructions ocn ES ee ia oe 10 11 12 13 14 Read these instructions Keep these instructions Heed all warnings Follow all instructions Do not use this apparatus near water Clean onl
47. levision is compatible follow the instructions below 1 Switch your television on 2 Point the remote control towards the television 3 Hold down the TV button and enter the two figure code corresponding to the brand of your television by pressing the appropriate numeric buttons Brand Codes Brand Codes SAMSUNG 01 14 15 23 LOEWE 28 SHARP 02 16 22 ZENITH 17 SONY 03 LG 06 08 18 RCA 07 29 MAGNAVOX 04 TOSHIBA 09 EMERSON 21 PANASONIC 12 24 SANYO 05 20 HITACHI 10 DAEWOO 19 NEWSAN 27 NOBLEX 25 TELEFUNKEN 26 Result If your television is compatible with the remote control it Will switch off It is now programmed to operate with the remote control gt f several codes are indicated for your television brand try each one in turn until you find one that works When you change the batteries in the remote control you must reprogram the code following the same procedure You can then control the television using the following buttons Button Function POWER D Used to switch the television on and off INPUT SEL 2 Used to select an external source VOL or Used to adjust the volume of the television CH Vor Used to select the required channel MUTE 5 Used to toggle the sound on and off gt gt The various functions will not necessarily work on all televisions If you encounter problems operate the television directly Basic Connections Auto Setup You will need to connect the DVD VCR to a TV
48. ll screen appears The picture will look vertically stretched lt Zoom Fit The top bottom left and right of the screen are cut off and the central portion of the screen is enlarged Vertical Fit When a 4 3 DVD is viewed on a 16 9 TV black bars will appear at the left and right of the screen in order to prevent the picture from looking horizontally stretched If you are using a 4 3 TV For 16 9 aspect ratio discs 4 3 Letter Box Displays the content of the DVD title in 16 9 aspect ratio The black bars will appear at the top and bottom of the screen lt 4 3 Pan Scan The left and right of the screen are cut off and displays the central portion of the 16 9 screen lt Screen Fit The top and bottom of the screen are cut off and the full screen appears The picture will look vertically stretched lt Zoom Fit When a 4 3 DVD is viewed on a 16 9 TV black bars will appear at the left and right of the screen in order to prevent the picture from looking horizontally stretched For 4 3 aspect ratio discs lt Normal Screen Displays the content of the DVD title in 4 3 aspect ratio Screen Fit The top and bottom of the screen are cut off and the full screen appears The picture looks vertically stretched lt Zoom Fit The top bottom left and right of the screen are cut off and the central portion of the screen is enlarged This function may behave differently depending on the type of disc Title Chapter Time Selection
49. n bar to Channel eee a E EE then press ENTER to select 3 Select Channel doe t gt Clock 3 5 Using the UP DOWN buttons move the selection bar to Channel sea dps PECE HT OMPULGH then press ENTER to select lae 4 Move the selection bar to RF Output CH then press right P i to change 4 Run Auto Channel Memory BB memen remo ue Move the selection arrow to Auto Channel Memory then press Change RF Output CH ENTER to select Initial Setup E lo A message will appear on your TV sica E The will automatically search for all available anguage angie IPS OIDO channels in the selected Tuner Band This procedure may take Pup Initial Setup a a few minutes to complete Front Display Auto Language English gt Change n nnne When finished the lowest channel found will be displayed Auto Power Off Off e A message will appear on your TV When the message disappears Channel change your TV to channel 3 or 4 to match the RF output channel Front Display Auto Auto Power Off Off of the player BRENTER RETURN BS MENU Initial Setup BiENTER RETURN MENU Language English Clock Channel gt Front Display Auto gt gt Initial Setup Auto Power Off Off Language English gt Clock gt Channel gt Front Display Auto gt Auto Power Off Off gt ENTER RETURN MENU Channel Ant Cable Antenna gt RF Output CH 3CH gt Auto Channel Memory gt C
50. nd F F buttons Level 4 simultaneously on the front panel for 5 seconds The reset ok Level 3 message will appear Press the POWER button and the Eae DVD VCR will go to the Auto Setup mode See page 13 Level 1 Kids Safe gt B ENTER RETURN fi MENU BleNTER RETURN MENU 34 35 Special Playback Features During DVD CD playback you can select from the following special playback options To resume normal playback press the bl cue Play Pause button 36 1 Still Press the lIl PLAY PAUSE button on the remote control during playback The picture will pause and the audio will mute To resume playback press the II PLAY PAUSE button If the player is left in Pause mode for 5 minutes it will stop automatically Frame Advance Step While in Still mode press the F ADV SKIP button on the remote control to advance one frame at a time Audio is muted during Frame Advance mode Press ll PLAY PAUSE to resume normal playback NOTE Frame Advance operates only in the forward direction Skip Forward Back While a CD or DVD disc is in Play mode press the SKIP FORWARD BACK buttons on the remote control or front panel to jump forward and backward through disc chapters tracks Skip Forward will jump to the next chapter track Skip Back will jump to the beginning of the current chapter track Press Skip Back again to jump to the beginning of the previous chap
51. o then press the ENTER button 4 Set Digital Output Highlight Digital Output then press the RIGHT button to select one of the following options lt PCM To use your DVD TV with an A V receiver without a Dolby Digital decoder lt Bitstream To use your DVD TV with an A V receiver with a Dolby Digital decoder Language Clock Channel Front Display Auto Power Off English Auto Off Initial Setup RENTER RETURN ES3MENU Language Audio Display Parental DVD Setup gt gt gt gt gt gt BiENTER RETURN ES MENU Language Audio Display Parental DVD Setup Ld Ld gt Q ENTER RETURN MENU Dynamic Compression PCM Down Sampling Audio Setup PCM Off On On BlENTER RETURN ES MENU gt gt gt F gt gt gt 27 PCM Bitstream Dynamic Compression If your A V receiver is equipped with a DTS decoder your DVD Dynamic Compression restrains the dynamic range of sound i e DEI VCR can output DTS digital sound but you MUST enable this the difference between the loud and quiet passages of a DVD audio date Language English feature in the menu system track Language English gt Clock gt Clock gt nee NS g NOTE Select On ONLY if you have connected a DTS equipped d 4 aaa a d A V receiver to the DIGITAL AUDIO OUT optical or coaxial on 1 Open MENU o ah the DVD VCR back panel Press the MENU button while the
52. o Return and END Search 7 event 1 month timer recording Time remaining counter real time counter Note Discs which cannot be played with this player Ability to play back may depend on recording DVD ROM DVD RAM conditions CD ROM lt CDV DVD R lt CD RW CDI e VCD lt DVD RW RW HD layer of Super Audio CD CDGs play audio only not graphics When you unpack the DVD VCR please check the following list of items is included in the packing case Registration Card User s Guide DVD VCR AD68 00078A AK68 00222A emmy En 5 uis a o Jal GSH RCA cable for RF Radio Frequency Remote Control 1 5V AAA Batteries 2EA Audio Video connection Antenna Cable AK59 00008N AC43 12002H AC97 01746A AC39 42001J Disc Type and Characteristics This DVD player is capable of playing the following types of discs with the corresponding logos Disc Types Logos Types Recording Disc Size ax Playing Time Single sided 240 min Double sided 480 min Single sided 80 min Double sided Characteristics DVD contains excellent sound and video due to Dolby Digital and MPEG 2 system Various screen and audio functions can be easily selected through the on screen menu Front Panel Overview V CHANNELA DVD VCR o
53. onth in advance Clock Set the TV to channel 3 or 4 Channel gt Front Display Auto gt Auto Power Off Off To Begin Setting the Timer Recording e Turn on your DVD VCR and e Turn on your TV BRENTER RETURN EB MENU 1 Open MENU Press the MENU button or the TIMER button while the DVD is in Stop or Play mode Timer Program If you want to set the timer program 2 Select Program Use the UP DOWN buttons to highlight PROGRAM then press p Pies thee the ENTER button 3 Select Channel Number Use the Right and UP DOWN buttons to set the channel BOUNCE Press the RIGHT button to move to the next setting 4 Set Time Date Speed Repeat Step 3 above to set start time end time date and record Ji o ae DAD epe speed Date can be set for one time daily or weekly recording gt See below 5 Save Timer Recording io Press the RETURN button to finish setting the timer recording CES ES Stop the VCR or turn the power off The timer indicator light will come on the VCR Then the VCR will automatically turn on and BRENTER RETURN BB MENU begin recording at the time you set To stop the timer recording press the POWER button or press the STOP button two times 6 Auto Speed Select If the length of the videotape is not long enough for a timer recording in the SP mode set the recording tape speed to AUTO Recording will start in the SP mode If the length is not long enough t
54. ose Getting audio CD quality sound requires an analog digital sampling rate that is conversion to MP3 format of at least 128 Kbps and up to 160 Kbps However choosing higher rates like 192 Kbps or more only rarely give better sound quality Conversely files with decompression rates below 128 Kbps will not be played properly Use a decompression transfer rate of at least 64Kbps when recording WMA files Sound quality with WMA files basically depends on the rate of compression decompression you choose Getting audio CD quality sound requires an analog digital sampling rate that is conversion to WMA format of at least 64Kbps and up to 192Kbps Conversely files with decompression rates below 64Kbps or over 192Kbps will not be played properly lt Do not try recording copyright protected MP3 files Certain securized files are encrypted and code protected to prevent illegal copying These files are of the following types Windows Media registered trade mark of Microsoft Inc and SDMI registered trade mark of The SDMI Foundation You cannot copy such files lt Important The above recommendations cannot be taken as a guarantee that the DVD player will play MP3 recordings or as an assurance of sound quality You should note that certain technologies and methods for MP3 file recording on CD Rs prevent optimal playback of these files on your DVD player degraded sound quality and in some cases inability of the player to read t
55. preferred language for disc menus then press the ENTER button FUNC gt BiENTER RETURN Language Setup Disc Menu English gt Audio English Subtitle Automatic ENTER RETURN MENU Disc Menu Language English Disc Menu Francais Deutsch Espanol Italiano Nederlands Others GIENTER RETURN MENU Audio Language Initial Setup To set the Audio Language to your preferred language follow these steps If your preferred language is available on a DVD your Audio Language English gt Language Setup Clock gt Raps 4 Language will automatically be set to the language you choose ET mum z Front Display Off Audis Engish gt Auto Power Off gt 1Hr Subtitle Automatic gt 2Hr 1 Open MENU Press the MENU button while the DVD is in Stop mode 2 Select DVD Use the UP DOWN buttons to highlight DVD then press E BUND the ENTER button ENTER RETURN MENU 3 Select Language Audio Language Move the selection bar to Language then press ENTER to select 4 Select Audio ies Highlight Audio then press the ENTER button Italiano AAA A zz QQ meA AAA Nederlands 5 Set Audio Language Preference Original Highlight your preferred language for audio soundtracks then ge press the ENTER button gt BIENTER RETURN MENU 24 25 Subtitle Language DVD Setup Language gt Audio gt Display gt Parental gt BiENTER RETURN MENU Language Setup
56. r is longer SAMSUNG is obligations with respect to software products distributed by SAMSUNG under the SAMSUNG brand name are set forth in the applicable end user license agreement Non SAMSUNG hardware and software products if provided are on an AS IS basis Non SAMSUNG manufacturers suppliers publishers and service providers may provide their own warranties This limited warranty covers manufacturing defects in materials and workmanship encountered in normal and except to the extent otherwise expressly provided for in this statement noncommercial use of this product and shall not apply to the following including but not limited to damage which occurs in shipment delivery and installation applications and uses for which this product was not intended altered product or serial numbers cosmetic damage or exterior finish accidents abuse neglect fire water lightning or other acts of nature use of products equipment systems utilities services parts supplies accessories applications installations repairs external wiring or connectors not supplied and authorized by SAMSUNG or which damage this product or result in service problems incorrect electrical line voltage fluctuations and surges customer adjustments and failure to follow operating instructions cleaning maintenance and environmental instructions that are covered and prescribed in the instruction book product removal or reinstallation reception problems and distort
57. rt the user to the presence of uninsulated dangerous voltage within the product s enclosure that may be of sufficient magnitude to constitute risk of fire or electric shock This symbol is intended to alert the user to the presence of important operating and maintenance instructions in the literature accompanying this product Copy Notification Federal law provides severe civil and criminal penalties for the unauthorized reproduction distribution or exhibition of copyrighted motion pictures and videotapes Title 17 United States Code Sections 501 and 506 Macrovision Notification This product incorporates copyright protection technology that is protected by method claims of certain U S patents and other intellectual property rights owned by Macrovision Corporation and other rights owners Use of this copyright protection technology must be authorized by Macrovision Corporation and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation Reverse engineering or disassembly is prohibited CAUTION To prevent fire shock hazard or annoying interference use only the recommended accessories To prevent electric shock do not use this polarized plug with an extension cord receptacle or other outlet unless the blades can be fully inserted to prevent blade exposure To reduce the risk of electric shock do not remove the unit cover or back There are no serviceab
58. s offer improved sound and picture over pangran TAS stereo TV and enjoy stereo sound when watching a movie or TV regular televisions because they receive the audio and video signals _ QJ GOO oo directly from the DVD VCR through the line inputs 1 Connect DVD VCR to Stereo a NOTE A monitor television is not the same as a computer A Maat an Using RCA cables connect the Line Out Left and Right Audio jacks monitor O O O on the back panel of the DVD VCR to the Auxiliary Inputs on your Q stereo receiver Connect the Video Output also in case you are using a stereo TV 1 Connect VCR to Monitor TV Connect RCA cables from the Audio Video Line Out jacks on the To Monitor TV Audio Video Inputs back panel of the DVD VCR to the Audio Video Line Inputs of your 2 SetStereo to Auxiliary Mode monitor TV Set your stereo receiver or TV to either Aux or Tape regardless of which line input you are using for your particular device 2 SetTVto Auxiliary Mode Set your monitor TV to Aux Video or Line Refer to your monitor television owner s manual for the correct setting AUX 3 Playa Tape Insert a DVD or Hi Fi stereo videotape into your system Be sure to 3 Connection is Complete 555 adjust the volume on your stereo receiver or TV Audio will be heard NOTE With this connection the TV VCR button has no effect It is through your stereo speakers as if the TV VCR button were always set
59. se of a Memory Card insert it follow to the right figure gt e In case of the Memory Card it is very important to insert it in which directions Refer to 45 page 2 Press the M CARD button Every time you push the M CARD button the system enters the Memory Card mode and the DVD CD mode in turn Memory Card mode Plays the Memory Card DVD CD mode Plays the CD R amp Photo CD 3 If there are above two kinds of playable files in the memory card or CD R the right screen is displayed Press the UP DOWN button to select JPEG in media types and press the ENTER button f no button on the remote controller is pressed for 60 seconds the menu will disappear and the selected item will be played To change the currently playing media press the STOP MW button twice and then press the DISC MENU button 4 The Album screen will be appeared To see the next 6 images press the p and to see the previous 6 images press the M4 button 5 Select an image and press the ENTER button Use the UP DOWN or LEFT RIGHT buttons on the remote controller to select the pciture you want to view and then press the ENTER button After selection of the picture the following Menu Bar is appeared and it is disappeared after 10 seconds Press the DISC MENU button to pop up again the Menu Bar HA Return to the Album Screen al Each time the ENTER button is pressed the picture x rotates 90 degrees clockwise SN Each time the E
60. t is better to remove it after pressing M CARD button to return to DVD CD Mode MP3 WMA Play CH TRK VOL M CARD aa INPUT SEL 2 e F ADV SKIP lt lt gt gt I lt Pil Select a Media Type E 03Q02 E SM Town PROGRAM 4 RANDOM 46 The memory card is played in the same way with the CD R Insert a CD R written MP3 or WMA file into the tray and close it In case of a Memory Card insert it follow to the left figure gt In case of the Memory Card it is very important to insert it in which directions Refer to 45 page Press the M CARD button Every time you push the M CARD button the system enters the Memory Card mode and the DVD CD mode in turn Memory Card mode Plays the Memory Card DVD CD Mode Plays the CD R If there are above 2 file extensions in the memory card or CD R the left screen is displayed Press the UP DOWN button to select a media type you want and press the ENTER button The first song in the first folder in the selected media will be automatically played f no button on the remote controller is pressed for 60 seconds the menu will disappear and the selected item will be played To change the currently playing media press the STOP MW button twice and then press the DISC MENU button If you want to hear other song press the UP DOWN button to select a song as you wish and press the ENTER button Press RIGHT button to see
61. ter track Search Forward Back While a disc is in Play mode press and hold the FORWARD BACK gt gt 44 buttons on the remote control or front panel to visually search forward backward at 2X 4X 8X 16X 32X 128X speed Press ll PLAY PAUSE button to resume normal speed NOTE CD search speed 2X 4X 8X Slow Motion During playback press the 9I PLAY PAUSE button to Still the image Press and hold the Search FORWARD p gt to play in slow motion at variable speeds Press and hold the FORWARD button b gt on the remote and front panel to increase or decrease the speed from normal playback to 1 8 1 4 or 1 2 speed Audio is muted during slow motion playback Press the ll PLAY PAUSE button to resume normal playback NOTE Slow function is not available for CD Stop Resume Press the Stop button once to stop playback To resume the DVD CD from the point where the disc stopped press the Il PLAY PAUSE button Press the m STOP button twice to completely stop playback The next time you press ll PLAY PAUSE the disc will start over from the beginning Disc Menu Navigation Many DVDs feature their own menu systems where you can select Titles Chapters Audio Tracks Subtitles and special disc features such as movie trailers and information on the cast Use these buttons to make selections in the Disc menus 1 DISC MENU Press to access the DVD s Disc menu if applicable DEA EZ VIEW MODE
62. the VCR deck is selected Basic DVD Operation 14 Fllow the instructions below to playback a DVD 1 Open the Disc Tray Press the OPEN CLOSE button on your remote control or on the front panel of the unit to turn on the power and open the disc tray 2 Inserta Disc Put a disc in the center of the tray with the label printed side facing up 3 Close the Disc Tray Press the OPEN CLOSE button on your remote control or on the front panel of the unit to close the disc tray 4 PlayaDVD Press the PLAY PAUSE button on your remote control or on the front panel of the unit Most discs will start to playback as soon as the tray closes lt Ifa DVD has a MENU the menu may pop up on TV screen 5 Additional DVD Options See pages 25 35 for advanced DVD Setup options See pages 36 52 for special DVD Playback features Basic VCR Operation To play a standard VHS videotape just insert it into the VCR deck and press the Play button You can turn on the Auto Play to enable the VCR deck to play automatically when you insert a videotape that is missing the Record Safety Tab See page 54 1 Insert VHS Tape Insert a standard VHS videotape into the VCR deck When a videotape is inserted power will turn on automatically 2 Play Tape Press the Il PLAY PAUSE button on the remote control or on the front panel of the unit The videotape will begin to play automatically
63. till be viewed through the RF or line inputs To activate your alternative S Video or Component video selection follow the Alt Video Out instructions on page 33 Keep in mind that you can choose either S Video or Component only but not both A superior video quality can be obtained when watching a DVD on your DVD VCR if your TV is equipped with S Video or Component Video inputs 1 Connect S VIDEO OUT to TV Using an S Video cable connect the S VIDEO OUT on the back panel of your DVD VCR to the S Video Input on your TV 2 Connect Component Video Out to TV Using a component video cable connect the COMPONENT VIDEO OUT Y Pb Pr on the back panel of your DVD VCR to the Component Video Input on your TV 3 Connect Audio Out DVD only Using RCA audio cables connect the Left Right Line Out jacks on the back panel of your DVD VCR to the Left Right Audio Line In jacks on your TV lt When connecting your DVD VCR to a TV with the S Video or Component Video Output make sure that you use these Line Out jacks To activate your connection see Alt Video Out on page 33 S VIDEO OUT OPTICAL To S Video Input on Your TV COMPONENT VIDEO OUT IGITAL AUDIO OUT A eS To Component Video Input on Your TV VIDEO rAUDIOs R L lo l 066 To Left Right Audio Inputs on Your TV 61 Stereo Connections Monitor TV Connections You can connect your DVD VCR to your home stereo system or Monitor style television
64. to view a DVD or to change the Rating Level No additional settings are necessary On A password is necessary to view a DVD and to view the Rating Level The menu will change as shown Use whichever connection is available on your A V Receiver NOTES The first time Require Password is set to Yes you will be sic distal aie prompted to enter a new password Ifthe Enter Password screen appears then Require Create Password Password has already been set to Yes Please skip to Step 5 There no Default Password Enter Password 5 Enter Password Use the numeric buttons 0 9 on the remote control to enter the 4 digit password Write your password down and keep it in a safe place in case Benea RETURN EH MENU you need it to change your settings later 6 Select Rating Level Parental Setup Move the selection bar to Rating Level then press ENTER to Use Password On select Rating Level 8 gt Change Password 7 Change Rating Level Use the UP DOWN buttons to select one of the following ratings Level 8 Adult Level 4 Level 7 Level 3 Level 6 Level2 Level 5 Level 1 Kids Safe All ratings above the level you select will also be blocked e g if Rating Level you block Level 6 then Levels 7 and 8 will also be blocked Level 8 Adult Press ENTER to confirm your selection qi i f you forgot your password press power on from a cold start ENT with no disc in the unit Press the REW a
65. tomatically stop at that position If the VCR reaches the end of the tape during end search the tape will be ejected 3 Scan and play Use scan and play when you don t know exactly where a program is located on a cassette tape Forward Intro Scan Highlight Forward Intro Scan then press the ENTER button Reverse Intro Scan Highlight Reverse Intro Scan then press the ENTER button VCR Function Go to 0 00 00 End Search Forward Intro Scan Reverse Intro Scan ENTER RETURN ES MENU 55 Basic Recording Special Recording Features You can record a TV show in progress by inserting a blank tape and While a recording is in progress you can watch a different channel pressing the REC button You can even add time in 30 minute watch a DVD or add recording time in 30 minute increments A Lie increments up to 4 hours by pressing the REC button repeatedly 58 see page 1 Pause Resume Recording NOTE Be sure your videotape has a Record Safety Tab If the tab Press the Pll PLAY PAUSE button is missing you can cover the opening with a small piece of Press REC again to resume gt tape Warning Do not cover this opening unless you are 2 Stop Recording sure you want to record over the tape Record Safety Tab Press the STOP button Before You Begin 3 Watch a Different Channel Power on the DVD VCR Press the TV VCR button on the remote to switch to your TV tuner Power on the TV b CHITRK S
66. y gt Parental gt ENTER RETURN MENU DVD Setup Language Audio gt Display gt gt Parental FUNC gt BiENTER RETURN Fi MENU Display Setup TV Aspect Black Level Alt Video Out S Video ENTER RETURN zi MENU 32 The Black Level feature adjusts the reference level of black in the video signal to one of two choices e Off Standard NTSC black level Yields consistent contrast through all sources e On Enhanced black level for increased contrast during DVD playback 1 Open MENU Press the MENU button while the DVD is in Stop mode 2 Select DVD Use the UP DOWN buttons to highlight DVD then press the ENTER button 3 Select Display Highlight Display then press the ENTER button 4 Set Black Level Highlight Black Level then press the RIGHT button to select one of the following options On This will enhance the Black Level for increased brightness contrast when viewing DVDs Off This is the Standard NTSC reference Black Level for consistent brightness contrast across all sources Alt Video Out The Alt Video Out option must be set in the on screen menu if you have connected your DVD VCR to a TV using the S VIDEO OUT or COMPONENT VIDEO OUT jacks e Use the S Video or Component Video connection method only for the DVD player The tuner and VCR can still be viewed through the RF or line outputs 1 Open MENU Press the MENU button while the DVD is
67. y with dry cloth Do not block any ventilation openings Install in accordance with the manufacturer s instructions Do not install near any heat sources such as radiators heat registers or other apparatus including amplifiers that produce heat Do not defeat the safety purpose of the polarized or grounding type plug A polarized plug has two blades with one wider than the other A grounding type plug has two blades and a third grounding prong The wide blade or the third prong are provided for your safety If the provided plug does not fit into your outlet consult an electrician for replacement of the obsolete outlet Protect the power cord from being from being walked on or pinched particularly at plugs convenience receptacles and the point where they exit from the apparatus Only use attachments accessories specified by the manufacturer Use only with cart stand tripod bracket or table specified by the manufacturer or sold with the apparatus When a used caution when moving the cart apparatus combination to avoid injury from tip over Unplug this apparatus When a cart is used use caution when moving the cart apparatus combination to avoid injury from tip over Refer all servicing to qualified service personnel Servicing is required when the apparatus has been damaged in any way such as power supply cord or plug is damaged liquid has been spilled or objects have fallen into the apparatus the apparatus has been exposed to

Download Pdf Manuals

image

Related Search

Related Contents

Troponine T à haute sensibilité, quels  Bedienungsanleitung  取扱説明書 - 日立工機  Une défiance bien française Confiance : mode d`emploi      BARON user manual v. 15.6.5  Display iniziale e operazioni di base  RF Dimmer Receiver  PCI-D64HU  

Copyright © All rights reserved.
DMCA: DMCA_mwitty#outlook.com.