Home

Panasonic PT-60LCX64 Television

1. Continued on the next page 54 For assistance please call 1 888 VIEW PTV 843 9788 or contact us via the web at http www panasonic com contactinfo Audio Adjustments Other Adjust While in the Audio menu screen select Other Adjust and press OK to display the Other Adjust sub menu m Speaker This feature is used to turn TV speakers On or Off e On TV speakers operate normally e Off TV speakers off m Surround Enhances audio response when listening to stereo m Audio Select Perform input switching of analog audio input and digital audio input when using the HDMI terminal AUTO Automatically performs digital analog input switching according to the input signal type D in digital Forces use of digital audio input signal transmitted via the HDMI terminal A in analog Forces use of analog audio input signal transmitted via separate RCA terminals eS O Press to select item MENUQWOEXIT Other Adjust Surround Press repeatedly to set HDMI IN input Other Adjust Surround Audio Select 4 Press to exit menu gt Q lt 9 O D Q O D a 9 me e 5 Using BBE BBE sound technology enhances speech intelligibility and restores the dynamic range of musical passages to provide outstanding natural sound Note If BBE is ON Surround cannot be selected Notes e Sound signals are output from the rear AUDIO OUT and DIGITAL AUDIO OUT terminal See pages 20 21
2. Press to display the options in the Lock menu 2 Press number keys to enter your secret code Press to select the How Long icon Press to display the How Long menu Press to select Time Press to set EXIT 5 M Press to exit menu Password You can change your 4 digit password Press number keys to enter your secret code In Lock menu select Password and press OK to display the Change Password menu Press number keys to enter a new 4 digit password Press to select Lock icon MENU a f Wreture Ore T 9 eet ANETE e Setup SELECT Po DOE Ca Ox ee E aa EXIT N Photo Viewer P LOCK w A 7 2 mo O Mock s Facto x ee Lock Block Program an EXIT OF How Long How Long lt 12 hours The TV will remain locked for the selected duration Password to uoijel9dO padueApY 63 Lock Feature Blocking Messages Various Blocking messages are displayed on screen depending upon the type of blocking you have selected in the Lock menu When Game Lock or Channel Lock is selected Following message is displayed if you attempt to tune to channels or select video Channel Locked Press OK to enter password for temporary unlock When the rating level is exceeded Following message is displayed if the program you are viewing exceeds the set rating level To view a blocked program you must enter your password Rating Limit Exceeded Press OK to enter password fo
3. Press AV lt P to display next previous page of 9 thumbnail files Press OK to display SLIDE MENU Press AV to select an item and press OK repeatedly START Starts slide show SPEED FAST Note Image transition every The display intervals of 2 seconds 2 5 and 10 seconds MEDIUM do not include file data Image transition every reading time The display 5 seconds interval becomes longer SLOW depending on the JPEG a size Image transition every 10 seconds Transition NORMAL Image transition one by one WIPE Image transition from top to bottom BLIND Image transition in a series of band like shapes that resemble window blinds 2 START SLIDE SHOW K c Press OK to stop or resume slide show 3 Press EXIT to exit this mode 90 For assistance please call 1 888 VIEW PTV 843 9788 or contact us via the web at http www panasonic com contactinfo Replacing the lamp unit The lamp unit is sold separately To purchase a replacement call the Panasonic accessory department toll free at 1 800 332 5368 Lamp unit Part No TY LA1000 Lamp unit replacement period The Lamp is a consumable item and it s life varies based on individual usage THE LAMP NEEDS TO BE Panasonic warranties the original Lamp for a period of 1 year from the date of REPLACED AND THE LAMP purchase e NEEDS TO BE e The unit will detect when the Lamp s end of life is approach
4. CableCARD SELECT A OK O MENUO EXIT Other Adjust Information Demo Mode JUST mode SELECT lt A CHANGE MENUO OEXIT Position Size v Position H width Normal ZOOM mode SELECT CHANGE MENUO OEXIT Position Ssize V Position V size Normal RGB input SELECT CHANGE OD MENUO OEXIT Position Ssize Vv Position H Size Phase Normal http www panasonic com contactinfo Adjusting screen position and size Adjustment Adjustment Details item Press button The image moves to the right Press lt button The image moves to the left Press button The image moves up Press lt button The image moves down If noise appears on the ends of the O Sl 5 Only JUST mode image in Shrink switch to Enlarge O Co O Shrink Enlarge If noise appears on the ends of the 5 5 Only 4 3 mode image in Widen switch to Narrow Except PC O O 5 am input Widen Narrow V Size Press button Press to enlarge image vertically Only ZOOM mode Press lt button Press to shrink image vertically Press button Press to enlarge image horizontally RGB input Press lt button Press to shrink image horizontally Press button Adjust in order to remove any picture interference or contour blurring RGB input Press lt button which may occur in computer images Color Corr Press OK With HDMI connection depending on the signal the picture may be HDMI input displayed with unnatural
5. Panasonic Digital Device Display Operating Instructions Models No PT 43LCX64 PT 50LCX64 PT 60LCX64 nR HOTV Sms a HDI OP 29 9 wutimediacara HDMI INTEGRATED TUNER DIGITAL Ea AUT MEDIA INTERAC USA Three Important Reasons to Register Your For assistance please call Product Immediately 1 888 VIEW PTV 843 9788 1 Protect Your New Investment or contact us via the web at Register your new Device Display for insurance purposes http www panasonic com contactinfo in case your new Device Display is stolen Product safety notification Puerto Rico Registering your product can help us to contact you in the unlikely event a safety notification is required under the For assistance please call Consumer Product Safety Act 787 750 4300 3 Improved Product Development or visit us at www panasonicpr com Help us continue to design products that meet your needs Register online at www panasonic com register 7A The presence of the DTV certification mark indicates that this product will DT successfully receive digital television transmissions that conform to any and all of the video formats described in the ATSC Digital Television Standard ATSC CERTIFIED DIGITAL TELEVISION This operating instruction book is designe
6. Refer to pages 10 11 for programming Remote Control procedure Operating a VCR Program the Remote Control to use with VCR TO DO THIS PRESS Turn on off AA A PIP CH mE w o Channels up down Record K3 Change to TV or VCR Mode ramro Operating a CABLE BOX Program the Remote Control to use with Cable Box TO DO THIS PRESS Turn on off Select a Channel Change Channels Up Down Back to previous channel Operating a DBS Program the Remote Control to use with DBS TO DO THIS PRESS Turn on off Display DBS menu Menu Navigation Select a Channel Program Information m e O Eoo NE Back to previous channel to previous channel PIP CH a ee ee EXIT Exit menus Tan Operating a DVD Program the Remote Control to use with DVD TO DO THIS PRESS Next Previous Chapter Cc y Skip Search Reverse Search Fast Forward Pay FREEZE Slow eae 98 Operating Components with Remote Control Operating a Cassette Deck To operate a cassette deck the Remote Control must be in AUX mode and be programmed with the appropriate code for your equipment TO DO THIS PRESS Turn on off Receiver Volume Up Down PIP MIN PAUSE pauso a Operating a Receiver Program the Remote Control to operate audio receiver TO DO THIS PRESS Turn on off Audio Mute RCVR VOI Up Down VOL VOL gt Tuner Pre set stations Up Down Press Remote Contro
7. Therefore Subsection 2d requires that any application supplied function or table used by this function must be optional if the application does not supply it the square root function must still compute square roots These requirements apply to the modified work as a whole If identifiable sections of that work are not derived from the Library and can be reasonably considered independent and separate works in themselves then this License and its terms do not apply to those sections when you distribute them as separate works But when you distribute the same sections as part of a whole which is a work based on the Library the distribution of the whole must be on the terms of this License whose permissions for other licensees extend to the entire whole and thus to each and every part regardless of who wrote it Thus it is not the intent of this section to claim rights or contest your rights to work written entirely by you rather the intent is to exercise the right to control the distribution of derivative or collective works based on the Library In addition mere aggregation of another work not based on the Library with the Library or with a work based on the Library on a volume of a storage or distribution medium does not bring the other work under the scope of this License 3 You may opt to apply the terms of the ordinary GNU General Public License instead of this License to a given copy of the Library To do this you mus
8. Channel Number ABC Channel Caption Channel Banner Maximized Press RECALL to maximize the channel banner display While it is displayed you can add a channel to or delete a channel from the Favorite channel list Antenna Antenna designation and oe and Rating PIP SPLIT Channel Number INDES ANADOSE andication PIP SPLIT Channel Caption Channel Caption A Moe P A 135 99999 TV PG13 4803 ABC CC FULL Del FAV Add Delete Closed Caption Aspect Time remaining Favorite Channel SAP in sleep timer Indicator Continued on the next page For assistance please call 1 888 VIEW PTV 843 9788 or contact us via the web at http www panasonic com contactinfo Device display operation Add FAV Del FAV feature This feature lets you add channels to or delete channels from the Favorite channel list 1 Tune to the desired channel to be added or deleted 2 To add a favorite channel Press RECALL while viewing an unregistered channel to display Add FAV in the CH Banner Press OK to add the channel uolj e19do diseg To delete a favorite channel Press RECALL while viewing a registered channel to display Del FAV in the CH Banner Press OK to delete the channel Note Please refer to page 49 for more about the Favorite Channel feature Auto shut off To extend lamp life if there is no signal to the set s tuner for 5 minutes the lamp will shut off automatically Invalid operation notific
9. Channel menu Press to select Manual Program PIP CH SEARCH DVD VCR CH OPEN CLOSE Press to enter sub menu Program Channel SELECT OK SPLIT move SWAP RF Tnput antenna CA B z MENU A Channel Add S E Ole 6 IL Channel Del Signal Meter Press to select RF Input RF Input can only be selected when both Antenna A and Antenna B are connected Press to select Antenna A or Antenna B Program Channel SELECT OK Input Setup lt Antenna CA a GAAT Channel Add A 2 MENU OV 6 t t AROME AC Channel Del A 66 Signal Meter Press to set Continued on the next page For assistance please call 1 888 VIEW PTV 843 9788 or contact us via the web at http www panasonic com contactinfo Tuning channels 6 To add channel Program Channel Sle Gla OK Press to select ie T RF Input Antenna CA E MENU Oh V_ Channel Add aoe La Press to select CH 2 e O D Press to add channels to memory O To delete channel Program Channel SELECT OK Press to select a CHANG ER Channel Add MENU WeEXLT Aut S Channel Del e to ee Ul eta lt Manual Program Press OK to delete Signal Meter Language Press to select CH Press to delete channels from memory F Repeat steps 6 to continue adding or deleting channels EXIT 8 amp Press to exit menu J Note Some channels with very weak signals may be locked into memory If desired the
10. PROG_ Press after entering major channel numbers to enter minor channel numbers ps RIP MAX hile remote is in Ty mode press to increase the PIP Size FF While remote is in VCR or DVD mode press to fast forward S 27 REC While remote is in VCR mode press to record S While remote is in TV mode press to scan available channels in search screens Press again SEARCH 9 to delete search screens Q D r m Q U mr Q D Q 11 Location of Controls Controls and Terminals on the Device Display Model PT 50LCX64 unit shown lt FRONT gt TEMP LAMP LAMP indicator This indicator lights up when there is a malfunction with the lamp unit PP 91 99 TEMP indicator This indicator lights up when there is an abnormal temperature in the unit P 99 Remote Control Sensor POWER POWER button POWER indicator P 26 al ocd Volume up down buttons P 34 Channel up down buttons P 34 TV VIDEO TV VIDEO button os Bh A Using your finger slide Slot Cover in direction of arrow to open Slot Cover PC CARD slot SD CARD slot 12 For assistance please call 1 888 VIEW PTV 843 9788 or contact us via the web at http www panasonic com contactinfo Model PT 50LCX64 unit shown Location of Controls lt SIDE gt DCM
11. Repeat the above steps until the component code is SPLIT MOVE SWAP found It may take many attempts before the correct code is found After the code is found press OK to store the code Component Codes The Universal Remote Control is capable of operating many component brands after entering a code Some components may not operate because the codes are not available due to limited memory The Universal Remote Control does not control all features found in each model Write the code numbers from tables in this space This will serve as a reference if you need to program your Remote Control CABLE VCR CD Cable Box Video Cassette Recorder Compact Disc Player DBS RCVR DVD Digital Broadcast System Receiver or Amplifier EEN Digital Versatile Player EEN I EHE EHN Other Component Other Component Other Component Remote Control Quick Reference Guide Operating peripheral equipment Infrared Codes Index The Remote Control is capable of operating many brands of peripheral equipment Refer to page 92 and 93 for programming procedures Notes e The Remote Control memory is limited and therefore some models may not operate The Remote Control is not designed to control all features available in all models e After entering the proper infrared code press the desired Mode Selection button on the Remote Control Refer to page 10 to 11 and 97 to 98 for details on operating peripheral equipment using the Remote Control V
12. Service Font Automatic Je Detautt_ Monosen Proper a M E S EEE ee aU Continued on the next page 67 Closed Caption Feature Continued from page 67 Size eee Q 5 Large j Smal Style Des CES wee SES Automatic 4 gt None gt Raised_ Drop Shadow Shadow lt gt Uniform lt P Depressed Colors 1 In digital closed captioning sub menu select Colors and press OK to display the colors sub menu Press to select each item Press to select desired setting Press to set Closed GU Il oh oll CoN g I GC GUN Io gata S IE kL EB CT Sere HANG E G Fore Opacity Transparent to turne aie Background LETE solid __ Outline VETER E alae Foreground OPENICLOSE Red S ae Fore Opacity CO Ease Flashing lt gt __ Solid eee utomatiole gt Black lt White J Red_ gt Green Cyan lt gt Magentale gt Yellow J Bius Note When digital caption is used on digital channel the VIDEO OUT Back Opacity will also output the CC information Automatic lt gt Transparent lt gt Translucent This means if you tape the program the CC information will Flashing lt also be recorded on tape To avoid this either turn off digital CC or turn on analog CC Outline For assistance please call 1 888 VIEW PTV 843 9788 or contact us via the web at http www panasonic com contactinfo C
13. Temperature setting VIVID This is the default mode It provides enhanced picture contrast and sharpness for viewing in a well lit room Cinema Select this mode for watching movies in a darkened room It provides a soft film like picture Standard Recommended for normal viewing conditions with subdued room lighting Press repeatedly to select PicMode VIVID Y Y Standard Note There is little change when PICTURE is increased with a bright picture or reduced with a dark picture Continued on the next page For assistance please call 1 888 VIEW PTV 843 9788 or contact us via the web at http www panasonic com contactinfo Picture Adjustments m Color m Tint m Brightness Picture m Sharpness m Contrast R Level m G Level B Level Adjust to desired level while viewing picture through the menu overlay Press MENU or wait a few seconds to return to the previous menu screen Press to exit menu Adjustment item Button Adjustment Details Remarks _ _ Press button The color becomes deeper Press lt button The color becomes paler excep eee i Press button Flesh tones become greenish ne Press lt button Flesh tones become reddish eae Briahiness Press button The screen becomes brighter 3 Press lt button The screen becomes darker Picture intensity becomes stronger as both Press button contrast and color levels are adjusted z
14. e If unit power is turned back on after performing the appropriate measures make sure the unit has sufficiently cooled down If the unit was used for a long period such that the lamp needs enough time to cool down this may take a while 101 Cleaning To ensure continued excellent performance by this product periodic cleaning is recommended The unit contains many plastic parts For this reason DO NOT use benzine thinner or other chemicals to clean the unit DO NOT bring into contact with insecticide or other volatile substances DO NOT allow the unit to come into contact for extended periods with rubber or vinyl products Dust will accumulate on the picture screen Please wipe with a soft cloth from time to time If you use a chemically treated cloth please be careful to follow the instructions that come with the cloth Remove dirt and soiling by wiping with a light cloth Even if the unit is heavily soiled do not apply cleaner directly to the unit Soak a Cloth in a solution of neutral cleanser diluted with water Then wring out the cloth wipe the unit clean and finish by wiping with a dry cloth Do not use any type of cleansers on the picture screen Customer Services Directory Obtain Product Information and Operating Assistance locate your nearest
15. e When volume is adjusted or the MUTE button is pressed from the Remote Control a message will be displayed e If the Mode is set to Auto or if BBE is ON Bass and Treble cannot be adjusted 99 Lock Feature This Device Display incorporates V CHIP technology to block the viewing of movies and television programs according to the rating category There are four 4 Content Advisory Categories MPAA Motion Picture Association of America TV Parental Guidelines Ratings Canadian English Language Ratings and Canadian French Language Ratings These categories are used as guidelines for blocking the programs The default mode for the Lock category is the Unlocked state In this state you can surf the various categories of the Lock menu After you have created a password you are prompted to enter it before you can make any changes in the Lock menu Enter Secret Code A 4 digit code must be entered to view a blocked program or change rating settings Press MENU to display the Main Menu screen SAP QO T LIGHT TVVIDEO S A ANTENNA B Press to select Lock MENU OE Sy Wreture Timer gt oe 2 Audio Setup SELECT e O TE amp kan 4 a pn AR icon Press to display the options in the Lock menu Press number keys to enter your secret code Note Use a code that is easy to remember and record it in a safe place FREEZE PIP CH SEARCH TV VCR DVD VCR CH OPEN CLOSE Upon entering the 4 digit code the Lock menu
16. lt Audio Program sub language broadcasts are both being received c a simultaneously Select the STEREO or SAP audio mode MTS Stereo broadcast Multi channel Television Sound Stereo broadcast Select STEREO STEREO lt audio mode ee e If stereo broadcast is weak and the display flickers select MONO audio mode for possibly better results SAP broadcast Secondary Audio Program sub language STEREO Select SAP audio mode for the sub language ea MONO broadcast Normal monaural sound broadcast STEREO SAP MONO 43 Picture in Picture PIP Screen This unit includes a two tuner Picture In Picture PIP feature This allows you to watch two 2 live broadcasts at the same time with or without an external video source such as a VCR cable box etc Display PIP screen 5 PIP Press to split Cno mS The previously selected screen appears on the Main zesg TVIVIDEO S A ANTENNA B Main screen Main picture a _ PIP screen Sub picture Returning to one screen PIP _ Press to return Select desired input mode of the PIP screen i eae Press to select the desired input mode If SKIP is set as the Input Label setting of Channel j Caption the mode will not be changed See page 71 Notes Sound from the Main screen is output from the speakers on the Device Display set In PIP mode the Main screen signal is output from the rear monitor output
17. A Demo Mode Other Adjust Position Size PIP CH c Information TV VCR DVD VCR CH OPEN CLOSE SPLIT MOVE SWAP Press to set On Demo Mode is started Off Demo Mode is canceled 4 Press to exit menu a uoij e19dO psdueApY 4 Note Demo Mode setting remains even when power is turned off To turn off Demo Mode select Demo Mode Off in the menu screen 81 Signal Meter Feature Displays the signal strength of the ATSC digital channel in either Antenna A or Antenna B SAP TVVIDEO S A ANTENNA B PIP CH SEARCH DVD VCR CH OPEN CLOSE SPLIT MOVE SWAP Note Signal meter feature is not available for analog channels Press MENU to display the Main Menu screen Press to select Setup icon cure S Timer DEN A Channel a ace ue PY 4 EXIT k Photo Viewer ut OK Press to display the options in the Setup menu Press to select Program CH icon Clos d_Caption OK e Other Adj Press to display the Program Channel menu scat CableCARD Press to select Signal Meter Press to enter sub menu In the RF Input field select either Antenna A or Antenna B Press to select channel number Press to display the Signal Strength Program Channel Input Setup RF Input Antenna CA lt A 2 3 gt Auto Scan Manual Program Signal Meter Signal Strength z 95 fo Peak z 95 SELECT OK CHANG EA MENU We EXIT J to retur
18. DAMAGES For assistance please call 1 888 VIEW PTV 843 9788 or contact us via the web at http www panasonic com contactinfo END OF TERMS AND CONDITIONS How to Apply These Terms to Your New Libraries If you develop a new library and you want it to be of the greatest possible use to the public we recommend making it free software that everyone can redistribute and change You can do so by permitting redistribution under these terms or alternatively under the terms of the ordinary General Public License To apply these terms attach the following notices to the library It is safest to attach them to the start of each source file to most effectively convey the exclusion of warranty and each file should have at least the copyright line and a pointer to where the full notice is found lt one line to give the library s name and an idea of what it does gt Copyright C lt year gt lt name of author gt This library is free software you can redistribute it and or modify it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation either version 2 1 of the License or at your option any later version This library is distributed in the hope that it will be useful but WITHOUT ANY WARRANTY without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE See the GNU Lesser General Public License for more details You should have received a c
19. EOE E EE 12 99 AVAVAD Olia eTa 11 37 E a S E 7 U Input 1 2 3 terMINAls eects teeter 13 Using stereo SySteM c cccccccesessssessesesecseseseceesesesecststssesteeeeees 20 J Usna VOP Ree eee nen ener ee ere 17 19 a 2 Ce a earn ne ee 9386 V L VESA co coccecceccsescestesteseessssessiatssstessestrsestintertstertustertesterserees 25 LAMP indicator POE O EIEE EEE EEE EEE 12 VGA i a E E A A E E E AN EN E A accom E E ence A E A E E E N A 23 Miao eTe a ae Volume Flo DUTIONS UMM isss 12 34 Light UttON cccscesseceesecseesesseseesucsesstsetsussessesetstestsetseteteeeeeess 414 VOL buttons Remote Control sssssssssssirssssrirsssnrinssens 11 34 Customer Record The serial number of this product can be found on its back cover You should note this serial number in the space provided below and retain this book plus your purchase receipt as a permanent record of your purchase to aid in identification in the event of theft or loss and for Warranty Service purposes Model Number Serial Number Panasonic Consumer Electronics Company Division Panasonic Sales Company Division of Matsushita of Matsushita Electric Corporation of America Electric of Puerto Rico Inc PSC One Panasonic Way Secaucus New Jersey 07094 Ave 65 de Infanteria Km 9 5 San Gabriel Industrial Park Carolina Puerto Rico 00985 Printed in Indonesia LSQT0857 A S0904 0
20. Except RGB IN Picture intensity becomes weaker as both contrast Press lt button and color levels are adjusted Press button The picture quality becomes sharper Press lt button The picture quality becomes softer EAO PERSEAR Presa P button Only the Highlights of the image become brighter Contrast Leno oaran RGB IN onl The Highlights become less bright diminishing y Press lt button Contrast R Level Press button The red component becomes stronger Press lt button The red component becomes weaker Press button The green component becomes stronger Greve Press lt button The green component becomes weaker Bae Oly B Level Press button The blue component becomes stronger Press lt button The blue component becomes weaker gt Q lt o O Q O D a 9 me O 5 51 52 Adjusting screen position and size POWER Mw m E Ram aL GOT ca a ee PIP CH EARCH DVD VCR CH OPEN CLOSE SPLIT MOVE SWAP Notes This Device Display is equipped with various screen modes If a screen mode with a different aspect from the broadcast program is selected image will appear differently Select the proper screen mode with this in mind Be careful when using this Device Display for commercial purposes or for public use such as in cafes and hotels Shrinking and enlarging images by using screen mode switching function zoom etc may violate copyright laws Im
21. Free Software Foundation we sometimes make exceptions for this Our decision will be guided by the two goals of preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of software generally NO WARRANTY 15 BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE THERE IS NO WARRANTY FOR THE LIBRARY TO THE EXTENT PERMITTED BY APPLICABLE LAW EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPY RIGHT HOLDERS AND OR OTHER PARTIES PROVIDE THE LIBRARY AS IS WITHOUT WARRANTY OF ANY KIND EITHER EXPRESSED OR IMPLIED INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE LIBRARY IS WITH YOU SHOULD THE LIBRARY PROVE DEFECTIVE YOU ASSUME THE COST OF ALL NECESSARY SERVICING REPAIR OR CORRECTION 16 INNO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER OR ANY OTHER PARTY WHO MAY MODIFY AND OR REDISTRIBUTE THE LIBRARY AS PERMITTED ABOVE BE LIABLE TO YOU FOR DAMAGES INCLUDING ANY GENERAL SPECIAL INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE LIBRARY INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE LIBRARY TO OPERATE WITH ANY OTHER SOFTWARE EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
22. PIP screens sur Press to swap Example During Main screen NORMAL Move PIP screen You can move the PIP screen to four positions Press repeatedly to select PIP position Initial Position y EER Tai 2nd Press gt y 3rd Press gt Initial position Note The last position chosen is saved and will not be erased even if the power is turned off uol e19doO dIseg 45 46 Splitting the screen AP SPLIT QO Tw Press to split The previously selected screen appears on the left pe TVVIDEO S A ANTENNA B Left screen AS Right screen Main picture POA ni oS Sub picture Returning to one screen SPLIT A Press to return Selecting the screen aspect for split screen Press to select modes Notes Sound from the Left screen is output from the speakers on the Device Display set When the screen is split signals of the Left screen are output from the rear monitor output terminal The left and right screens are processed by individual circuits and therefore may vary in image quality SPLIT SCREEN 4 3 Split screen returns to single screen when the According to the signal the display may Device Display is turned off h wold The right and left screens essentially cannot a a cea Gps display the same picture at the same time A split screen which includes an RGB IN signal is fixed as SPLIT SCREEN 4 3 Example RGB input is shown right CARD and HDMI
23. Power turns off while another indicator is e Please consult your nearest dealer flashing e Are the batteries dead or inserted incorrectly U Q Q D e Is the set being used in a location that is hot e Is the remote Control sensor in direct light of fluorescent lamps or other strong sources of light e Did you correctly set the Remote Control code 92 Image shakes e Is the antenna or antenna cable old broken or shorted O e Is the antenna cable connected properly 14 16 e Sudden changes in ambient temperature may cause condensation in the internal optics Condensation should disappear after Power has been ON for a while Color oaichescrne color e When using a VCR and selecting channels on the TV is the j TV VIDEO mode for the VCR set to TV e Is the antenna facing the right direction SE buildings Cig a aaa When using 16 9 image software there is no picture at the top and po the screen bottom of the screen cinema vision size software etc Remote Control does not function Image is not clear the top and bottom positioning 52 53 pantana aia whistling sound when the power is ON malfunction Some parts of the screen are always lit while others do not light up Some parts of the screen do not light up Fan is operating even though TV Power is e This is because the cooling fan is operating The fan will stop after 26 OFF about 1 minute An OSD instructing to replace the l
24. Set Top Box does not have a Digital Out terminal setting use the Component Video Input or the S Video Input or Video Input In this case the picture will be displayed as an analog signal 2 Press TV VIDEO on the Remote Control to select HDMI input G D n Si U Q u m n D Q By inputting a High bandwidth Digital Content Protection high definition picture source to the HDMI IN terminal of this Device Display high definition pictures can be displayed on the screen in their digital form This terminal is for use in the future when High bandwidth Digital Content Protection DVD players and D VHS are put on the market Notes e Select the HDMI input position by pressing the TV VIDEO button P 37 The HDMI IN terminal can only be used with 1080i 720p and 480p picture signals If there is no audio check if the source equipment has PCM output If not please use analog connections Be sure HDMI is securely connected If not picture noise and or incorrect picture display may result With HDMI connection depending on the signal the picture may be displayed with unnatural colors as if red and blue are reversed See UV Timing of Page 53 Compatible formats Video Signal The Device display is compatible with following formats Please set the connecting device to following format Display mode No of dots Vertical scanning frequency Hz 1080i 1920 x 1080i 59 94 60 1280 x 720p 59 94 60 720p 480p
25. and program in the on screen Channel Banner display In order to select channels properly Auto Scan must be performed refer to pages 30 31 Direct Tuning Method Follow the procedure below to directly enter the channel number using the Remote Control number keys Select analog channel Press the number keys on the Remote Control to TE 6 enter the Channel number Press OK The following is an example of tuning to channel 15 Direct Tuning Example Channel Banner Display WW Q 1 O O O D Q e Step _ Select digital channel 1 2 3 If tuning a digital channel and your channel contains more than one program press PROG and enter the program 1 2 3 etc using the number keys Press OK The following is an example of tuning to channel 15 1 be T k v p O Direct Tuning Example Step Action Channel Banner Display 2 3 Eells CH y 35 36 Device display operation Rapid Tuning Switches between the current and last channel or program R TUNE Press to switch to previously viewed channel i Photo Viewer or input modes Antenna Input A B Tuning A ANTENNA B A B button switches between the two RF antenna the inputs if connected The last tuned channel in qF memory of the respective RF input is displayed PIP SPLIT MOVE SWAP For assistance please call 1 888 VIEW PTV 843 9788 or contact us via the web at
26. ewn TVVIDEO S2 3 E 20 4 21 6 J2 7 8 9 23 24 10 11 25 12 26 13 14 27 28 15 29 30 16 31 17 32 Note This section describes TV mode only For other modes see pages 92 98 For assistance please call 1 888 VIEW PTV 843 9788 or contact us via the web at http www panasonic com contactinfo Location of Controls Remote Keys DESCRIPTION 1 POWER Press to turn ON and OFF TV Sets the remote to communicate with television Sets the remote to communicate with other devices ee a MMN 4 SD _ s Accesses the Photo Viewer feature SD Card or PC Card s ASPECT Changes display aspectratio 6 MUTE __ s Presstomutesound 8 OK Press to choose menu and sub menu entry S 9 MENU Press to display Main Menu or return one step backward in menus Z lt 10 Number __ Press numeric keypad to select any channel or press to enter alphanumeric input in menus _ 12 RE MIN pene remote is in TW mode press to decrease he PIP size 0 REW While remote is in VCR or DVD mode press to rewind S ps FREEZE Set vieo widow a 16 PIP_______ Press to display or delete PIP screen o 1s sap In analog mode press to access audio modes Stereo SAP or Mono In digital mode press to access next audio track Lights all buttons The selected mode button TV VCR etc flashes Press to switch to A or B RF antenna input 24 CH AY Press to change channels and navigate in menus Z gt S O 25
27. guidelines shown in the diagrams below If viewing for an extended period of time sit as far back from the screen as possible lt Top view gt At least 1 6 m PT 43LCX64 1 8 m PT 50LCX64 2 2 m PT 60LCX64 lt Side view gt At least 1 6 m PT 43LCX64 1 8 m PT 50LCX64 2 2 m PT 60LCX64 Before Using Remote Control Battery Installation Requires two AA batteries supplied 1 While pressing in on the catch 2 Install the batteries as shown in 3 Press cover in direction of open cover in direction of arrow the battery compartment arrow until it snaps shut Polarity or must match the markings in the compartment Two AA size A CAUTION Incorrect battery installation can cause the batteries to leak leading to personal injury and or damage to the remote control Observe the following precautions 1 Batteries should always be replaced as a pair Always use new batteries when replacing the old set 2 Do not mix battery types example Zinc Carbon with Alkaline 3 Do not attempt to charge short circuit disassemble heat or burn used batteries 4 Battery replacement is necessary when the remote control acts sporadically or stops operating the Device Display set 1 For frequent remote control users replace old batteries with Alkaline batteries for longer battery life 2 Whenever you remove the batteries you may need
28. in RF VIDEO INPUT 1 3 or COMPONENT VIDEO INPUT 1 3 the screen size is automatically changed POWER Press MENU to display the Main Menu screen QO e LIGHT a e a gt Press to select HAm Picture icon A S TVNIDEO S A ANTENNA B Picture oS Timer D Alico e Setup i os we Lock D Press to display pn P ee Picture menu Press to select Other Adjust Picture PicMode Color Tint Brightness Picture Sharpness Normal Press to display the Other Adjust sub menu SPLIT MOVE SWAP Press to select ID1 Other Adjust i Color Temp Video NR 3D WC Color Matrix 3D I P Press to set On or Off When screen size specification signals are detected screen size is automatically changed The screen size is not automatically changed Turn Off if this function does not operate properly Press to exit menu Q2 4 Notes e When ID1 is detected and screen size is changed Aspect mode will be displayed e When displaying split screen ID1 is not detected uoij e19dO p vuenpy TT RGB IN Input Feature Set the signal to be input to the Device Display s RGB IN terminal Most analog RGB IN signals are selected automatically When RGB input signal is VGA 60Hz from PC or 480p from other equipment you must manually switch to the desired input Press MENU to display the Main Menu screen SAP LIGHT 1 Press to select MENU h DA Picture icon ES O
29. input screen cannot be displayed using the Split Screen function The signal input from Antenna B is displayed on the Left screen only It cannot be displayed on the Right screen bigs SPLIT SCREEN 4 3 Example RGB input For assistance please call 1 888 VIEW PTV 843 9788 or contact us via the web at http www panasonic com contactinfo Split screen Changing the channel of the right screen Swapping left and right screens oveverch Press to select the desired SWAP Press to swap A channel Example Example During SPLIT SCREEN NORMAL During SPLIT SCREEN NORMAL OU Q 4 O O O D Q O Example Select desired input mode of the Right During SPLIT SCREEN NORMAL screen RGB input yee Press to select the desired input mode SY CVideo T RBF i N i Y 4 If SKIP is set as the Input Label setting of Channel Note Caption the mode will not be changed See page Picture quality may change according to the 71 combination of signals input to the left and right screens 47 searching for the desired channel Channel search Channel search displays each channel in order as a paused image Channels are displayed from the left top to the right bottom in order When it reaches the right bottom the next channel is displayed at the left top overwriting the previously displayed channel SEARCH When SEARCH OPEN CLOSE is pressed during OPENICLOSE
30. instructions on screen If you experience keyboard or remote control function hang up when using DCM Digital Cable Module unplug the unit and plug it back on and try the controls again If this condition still exists please call Panasonic Customer Call Center for further instructions For assistance please call 1 888 VIEW PTV 843 9788 or contact us via the web at http www panasonic com contactinfo Installation How to connect the 1 2 3 Input Terminals Connects VCRs and other peripheral equipment G D F aye S VHS VCR Q U Pr Q gt r D Q Similar connections are available at the INPUT 1 2 3 input terminals P 13 VHS VCR Similar connections are available at the INPUT 1 2 3 input terminals Notes e Input 3 is located on the side of the unit e Select the desired VIDEO input position by pressing the TV VIDEO button P 37 e When connecting video cables priority is given to the S Video cable when the S Video input terminal and the video input terminal are connected at the same time 17 18 Installation How to connect the COMPONENT VIDEO Input Terminals Because each Y PB and PR signal is input independently the Component signal allows for more accurate color reproduction The Component signal output terminal indication will differ according to the output device Y PB PR Please read the operating instructions included with the output device Note
31. is displayed PIP SPLIT MOVE SWAP Password 8 MENU to return Notes Press to exit menu e Once ratings are set restricted tapes or programs cannot be accessed unless the secret code is entered If you forget your secret code refer to Reset User s Memory Functions on page 64 For assistance please call 1 888 VIEW PTV 843 9788 or contact us via the web at http www panasonic com contactinfo Lock Feature Lock Set Press MENU to display the Main Menu screen Press to select Lock icon MENU Or Ss Bowre gt Timer Audio lt Setup SELECT ro w n r EXIT N gt Photo Viewer AR ou Press to display the options in the Lock menu Press number keys your secret Enter Password MEE vey BD _ Press to select the Lock Set icon oo Lock Set lel ca oe Lock E oe Blo ck Pr rogram fo return ey Press to display the Lock Set menu gt lt Q 4 Mode D To prevent video games VCR tapes and all channels and video modes from being viewed The possible modes are e Off Turns off Lock set functions O e Lock All All channels are locked regardless of the rating level a e Game Lock Locks out CH 3 4 and Video inputs a e Channel Lock Locks out specific analog and digital channels Password is required to view any of the locked n channels O Lock set OK Press to select the Te CHANG Ee desired setting ag AU COLOR IT Press
32. nnnnnnnnnnnnnnnnnnsnnnnnrnnnnnrnnnnnrnnrnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn ennenen 79 o edia nie A E E E 80 me Domo Mode Feature essea E OEE 81 re Signal Meter Feature ccccccccsssseeececcssseeeeeeeceasseeeeeeeeaasseeeeseeeagseeesseesaasseseeses 82 Switching languages for isplay cccccccsseeeeeeeeeeeseeeeaeeeseneseeeseeeeeseeeseneees 83 Cable Module WNT siaies ec vaneactwieiessinan ayo patceeanensndeuansisndnnunsiascoate danestpodeusadaceedueanecanvens 84 ABDOU SCOOT atari cece sess aE E EEA EET 85 Photo Viewer SD Card PC Card cccccescceseeeeeeeeeeeeeeeeeeeneesaeeseneseneesenensaees 86 Replacing the lamp UMIt cece cece cence ee eneeneceeseneseeeoaeeaeseneceesensenesenessesonenes 91 Remote Control Quick Reference Guide Operating peripheral equipment 92 Other TROUDICSNOO UNG crire E EEEE 99 no 81264 11 ey 6 S sainn E ee eee eee eee eee 100 Information Warning Indicators sscceseceeeeeeeeiereeeeeeeeeneeeseeenieesneeenteesaneneneeenaeeen 101 CICING oes mses ts acces esc eee ee me ee eee see ee 102 Customer Services Directory cccccccseceseeeceeeseeeeeeeeeseeeesesseeneseeneseneesenesooes 102 Limited Waranty sissi a a aa A 103 LAS ac cre ead spe TE EE E E E E EE EE E EE O Back Cover Before Using Receiver Location This Device Display is intended to be used with an optional stand or entertainment center Consult your dealer for available options Locate fo
33. of God THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER LIMITED WARRANTY COVERAGE THE WARRANTOR IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT OR ARISING OUT OF ANY BREACH OF THIS WARRANTY As examples this excludes damages for lost time cost of having someone remove or re install an installed unit if applicable or travel to and from the servicer The items listed are not exclusive but are for illustration only ALL EXPRESS AND IMPLIED WARRANTIES INCLUDING THE WARRANTY OF MERCHANTABILITY ARE LIMITED TO THE PERIOD OF THE LIMITED WARRANTY Some states do not allow the exclusion or limitation of incidental or consequential damages or limitations on how long an implied warranty lasts so the exclusions may not apply to you This warranty gives you specific legal rights and you may also have other rights which vary from state to state If a problem with this product develops during or after the warranty period you may contact your dealer or Servicenter If the problem is not handled to your satisfaction then write to the warrantor s Consumer Affairs Department at the addresses listed for the warrantor PARTS AND SERVICE INCLUDING COST OF AN IN HOME SERVICE CALL WHERE APPLICABLE WHICH ARE NOT COVERED BY THIS LIMITED WARRANTY ARE YOUR RESPONSIBILITY 103 104 This product utilizes the following so called open source software 1 the software which is licensed under th
34. or distribute the Library is void and will automatically terminate your rights under this License However parties who have received copies or rights from you under this License will not have their licenses terminated so long as such parties remain in full compliance 9 You are not required to accept this License since you have not signed it However nothing else grants you permission to modify or distribute the Library or its derivative works These actions are prohibited by law if you do not accept this License Therefore by modifying or distributing the Library or any work based on the Library you indicate your acceptance of this License to do so and all its terms and conditions for copying distributing or modifying the Library or works based on it 10 Each time you redistribute the Library or any work based on the Library the recipient automatically receives a license from the original licensor to copy distribute link with or modify the Library subject to these terms and conditions You may not impose any further restrictions on the recipients exercise of the rights granted herein You are not responsible for enforcing compliance by third parties with this License 11 If as a consequence of a court judgment or allegation of patent infringement or for any other reason not limited to patent issues conditions are imposed on you whether by court order agreement or otherwise that contradict the conditions of this Licens
35. please call 1 888 VIEW PTV 843 9788 or contact us via the web at http www panasonic com contactinfo Block Program Lock Feature This feature allows you block movies and television programs based on the MPAA U S TV Ratings system Canadian English Language Ratings and Canadian French Language Ratings m MPAA The MPAA uses standard movie ratings to block unwanted movies from being displayed Press MENU to display the Main Menu screen Press to select g MENU Lock icon Te Press to display the options in the Lock menu 2 Press number keys to enter your secret code Press to select the caia Block Program icon A Eo cA Lock C P Press to display the Block Program menu Press to select MPAA Press to enter the MPAA field m Mode Off Cannot view NR not rated programs On Can view NR programs Press to select Mode Press to select On or Off Press to set Block Program Press to select the desired EEEE rating level EN See page 65 a K Press to change the rating limit to Viewable or Blocked Press to exit menu Bure Or CS 2 Abdio lt Setup a wicca ey XIT N Photo Viewer Ao Ps O RIN sc Sra Off viewable viewable Viewable viewable viewable viewable viewable SELECT OK CHANG E MENU WeEXIT 2 viewable to return uoi eia do padueApY viewable viewable viewable 59 Loc
36. produce a modified executable containing the modified Library It is understood that the user who changes the contents of definitions files in the Library will not necessarily be able to recompile the application to use the modified definitions b Use a suitable shared library mechanism for linking with the Library A suitable mechanism is one that 1 uses at run time a copy of the library already present on the user s computer system rather than copying library functions into the executable and 2 will operate properly with a modified version of the library if the user installs one as long as the modified version is interface compatible with the version that the work was made with c Accompany the work with a written offer valid for at least three years to give the same user the materials specified in Subsection 6a above for a charge no more than the cost of performing this distribution d If distribution of the work is made by offering access to copy from a designated place offer equivalent access to copy the above specified materials from the same place e Verify that the user has already received a copy of these materials or that you have already sent this user a copy For an executable the required form of the work that uses the Library must include any data and utility programs needed for reproducing the executable from it However as a special exception the materials to be distributed need not include anythi
37. terminal Because Main and PIP screens are processed by individual circuits image quality may vary slightly PIP mode returns to single screen when the Device Display is turned off Essentially the Main and PIP screens cannot display the same picture at the same time Only the Analog programming from Antenna A and video inputs signal can be viewed in the PIP screen function A component signal cannot be displayed on a PIP screen Thus when a component signal is displayed on the Main screen the SWAP button becomes invalid When ASPECT is in ZOOM mode PIP feature cannot be used PP 40 41 When the RGB HDMI or Card Photo Viewer input mode is selected PIP feature cannot be used P 37 The signal input from Antenna B can be displayed on the Main screen only It cannot be displayed as a PIP screen For assistance please call 1 888 VIEW PTV 843 9788 or contact us via the web at http www panasonic com contactinfo Changing the channel of the PIP screen ett Press to select the desired channel DVD VCR CH Example Tie During Main screen NORMAL Selecting the screen size for PIP screen You can choose PIP screen size of 3 magnifications PIP MAX Press to large cos PIP screen size PIP MIN REW aa Press to small PIP screen size gt Initial size Note The last size chosen is saved and will not be erased even if the power is turned off Picture in Picture PIP Screen Swapping Main and
38. that there is no warranty or else saying that you provide a warranty and that users may redistribute the program under these conditions and telling the user how to view a copy of this License Exception if the Program itself is interactive but does not normally print such an announcement your work based on the Program is not required to print an announcement For assistance please call 1 888 VIEW PTV 843 9788 or contact us via the web at http www panasonic com contactinfo These requirements apply to the modified work as a whole If identifiable sections of that work are not derived from the Program and can be reasonably considered independent and separate works in themselves then this License and its terms do not apply to those sections when you distribute them as separate works But when you distribute the same sections as part of a whole which is a work based on the Program the distribution of the whole must be on the terms of this License whose permissions for other licensees extend to the entire whole and thus to each and every part regardless of who wrote it Thus it is not the intent of this section to claim rights or contest your rights to work written entirely by you rather the intent 1s to exercise the right to control the distribution of derivative or collective works based on the Program In addition mere aggregation of another work not based on the Program with the Program or with a work based on the Pr
39. to reset the remote control infrared codes We recommend that you record the code on page 93 prior to setting up the remote Emergency Alert System EAS Forced Tuning If a DCM Digital Cable Module is installed the cable MSO multiple system owner operator may provide an Emergency Alert System message These messages are intended to alert the general public of important local or national emergency situations In the event of receipt of one of these messages the Device Display shall immediately tune to the channel as directed by the EAS message If the channel has been blocked using the parental control the parental blocking has priority over the forced tune For assistance please call 1 888 VIEW PTV 843 9788 or contact us via the web at http www panasonic com contactinfo Glossary and Acronyms CC Closed Captioning EAS Emergency Alert System OSD On Screen Display MSO Multiple system owner operator Dolby Digital This is a method of coding digital signals developed by Dolby Laboratories Apart from stereo 2 channel audio these signals can also be multichannel audio A large amount of audio information can be recorded on one disc using this method Film and video DVD Videos are recorded using either film or video Usually film is recorded at 24 frames per second the rate movies are filmed at while video is recorded at 30 frames per second PCM pulse code modulation These are uncompressed digital s
40. to set EXIT 5 Press to exit menu of Lock Feature QO a LIGHT Gu ee ae Ea E o TVVIDEO _S _ A ANTENNA B PIP SPLIT MOVE SWAP Note To remove a channel number from the list select that number and press OK button Channel Lock This option lets you block out up to four 4 channels from each RF input Antenna A and B regardless of the program rating Password is required to view these blocked channels Press MENU to display the Main Menu screen MENU Er 5x SELECT O Sax Z o EXIT 9 Photo Viewer P Ew Press to select Lock icon Wrcture Or P oy D Audio lt AR Press to display the options in the Lock menu 2 Press number keys to enter your secret code 3 Press to select the LOCK Jat 1 PR Channel Lock icon i ock Set Password ar Block Program an EXIT ow Long Press to display the Channel Lock menu 4 m RF Input Select either Antenna A or Antenna B Press to select Antenna A or B Press to select Channel m Channel Select up to 4 channels to be blocked out regardless of program rating Press to select desired channel Press to enter your selection Up to 4 channels can be blocked regardless of ratings from each input STEW Eca x OK q CHANG E MENU WWheEXIT e EO E S E E Channel Lock lt 4 AntennaCA C a r ao A 21 6 EXIT K Press to exit menu For assistance
41. www panasonic com contactinfo Photo Viewer SD Card PC Card Compatible Card D Card slot PC Card slot ey Sie xD Picture Card e The media listed in the right column above can be read via the PC Card in the PC Card adaptor Hard disk PC Cards Flash ATA Cards and other recorded media cannot be used e Place the selected media onto the PC Card and then insert into the PC Card Slot L o e When both an SD Card and PC Card are inserted the SD PC Card Card contents has priority and will be displayed If the Card is unusable CARD FORMAT NOT SUPPORTED is displayed on screen Remove the Card only when Remove the Card ACCESS is not displayed If an incompatible JPEG file is displayed full size file preview DATA FORMAT NOT SUPPORTED is displayed Insert the Card Front Card Slot P 12 E a F Notes e Insert remove Card while Card Menu Screen or No Card Press in light Press PC Card is displayed eae at tly EJECT TAB twice e Be sure ACCESS is not displayed before Card i l insertion removal then release Fully insert the Card ACCESS is displayed Wait until ACCESS goes out before removing e Before reinserting a Card after removing it wait until NO CARD is displayed If there are Cards in both Card Slots wait until the Card Menu Screen of the other Slot is displayed and ACCESS is no longer displayed before reinserting a Card
42. 22 124 125 126 127 12 118 140 141 142 145 03 124 03 104 105 05 132 Q A1N N1N W DIDID D I D D 010 viS A _ Hamlin Hitachi Macom Magnavox D o x sed 25 232 niversal 22 132 ideoway iewstar 29 130 enith 00 117 enith Drake 100 atellite G 05 132 02 137 139 09 110 114 06 107 128 129 130 01 116 05 132 Z Philips Pioneer Pulsar ON Instrument Jerrold k a j NS SS NS l M lM l M w O isher 224 225 227 2 2 2 96 Remote Control Quick Reference Guide Operating peripheral equipment CASSETTE PLAYERS PERSONAL VIDEO RECORDERS RECEIVERS AMPLIFIERS and DBS Infrared Codes Index For assistance please call Codes For Cassette Decks Codes For Personal Video Recorders TV Philips Tivo Codes For Receivers Fisher 104 Jensen 129 Harman Kardon 115 123 Echostar 105 115 116 105 Express VU 105 115 G I General 11 112 HNS Hughes Codes For Cassette Decks Contd Codes For Receivers Contd Brand _ Code Sansui 103 111 139 Codes For DBS Contd CA 106 109 110 113 ony 1 tar Choice 103 108 1 oshiba Uniden 101 102 Proscan 1 888 VIEW PTV 843 9788 or contact us via the web at http www panasonic com contactinfo Remote Control Quick Reference Guide Operating peripheral equipment Operating Components with Remote Control Note
43. 3 remaining minutes prior to turn off 79 You can display the input signal type Display items differ depending on the input signal Press MENU to display the Main Menu screen O eas 1 m Ge Ge C2 Press to select Setup icon MENU ig pe Wreture n D n SEA TVVIDEO S A ANTENNA B Setup SELECT ET WMV amp channe E Lock me rr EXIT N Photo Viewer Press to display the options in the ut Setup menu Press to select the at a Other Adj icon Program CH Press to display the Other Adjustment menu Press to select Information HI R Other Adjust Position Size Demo Mode Since CH mae Press to display SPLIT MOVE SWAP nfo rm atio n screen A MENUQ XYOEXIT Information 4 EXIT Press to exit menu 80 For assistance please call 1 888 VIEW PTV 843 9788 or contact us via the web at http www panasonic com contactinfo Demo Mode Feature Function demonstrations of this unit are displayed in Demo Mode Press MENU to display the Main Menu screen POWER AP 3 Press to select LIGHT ICON wE Setup ico _ ss Ge OF TVVIDEO S A ANTENNA B D ree aan Setup SELECT L L a Press to display l s w Lock the options in the M a t Setup menu Press to select Sr the Other Adj i Program CH ICON l Clo d Caption Press to display a M the Other H Adjustment menu ces CableCARD SELECT A OK Press to select
44. 720 x 480p 59 94 60 640 x 480p 59 94 60 Audio signal PCM When digital audio is included in the HDMI connection the compatible sampling frequencies are 48 kHz 44 1 kHz 32 kHz See page 55 25 26 Power ON OFF Turning the Power ON and OFF Always be sure to follow the procedure given below to turn the Device Display power ON and OFF e The lamp cooling fan will continue to operate for approximately 1 minute after the power is turned off At the same time the POWER indicator will blink Red Do not disconnect the power cord from the outlet and do not open the circuit breaker unless necessary while the cooling fan is still operating Do not disconnect the power cord from the power outlet while the power indicator blinks Red POWER button Power ON POWER indicator Press POWER on Device Display or Remote Control to turn power on The Power Indicator blinks Green for about 10 seconds and then turns solid Green Power OFF Press POWER on Device Display or Remote Control to turn power off TV VIDEO Power shuts off after a Black Screen is displayed for a few seconds Note If the POWER button is pressed during the Black Screen display Power is turned back on The Power Indicator blinks Red for about 1 minute and then turns solid Red SAP L LIGHT ee oes Fae E g TVVIDEO _ S2 A ANTENNA B Note When the AC Cord is unplugged the internal cooling fan stops operating In t
45. 88 or contact us via the web at http www panasonic com contactinfo Warning Indicators This unit has indicators lights on the front to let you know the unit s internal condition See page 12 Depending on the condition the Lamp Power or Temp indicator will flash to alert you In this case turn unit off and follow the measures below Symptom Possible Solution Flashes red 1 or 3 times every power shuts off Malfunction Contact a service center 5 seconds P ARATE ere NOS SVEI Power shuts off Internal overheat error Wait a while then turn unit back on 5 seconds bani S ES evens Power shuts off Malfunction Contact a service center D PUR Maximum Lamp life hours Lights solid red every time power ded Replace Lamp is turned on AORT Flashes red 1 time ever 5 Lamp will not light or light is Try turning Power On several times If Power shuts off i i seconds abnormal error persists contact service center Jojyeoipuy dwiay Jojyeoipuy dwe PAE eC MMe evel 2 Power shuts off Lamp voltage is abnormal Contact service center seconds Flashes red 3 times every 5 Power shuts off Lamp temperature is too high Contact service center seconds Pee ecrinee evel Somer E Oner eror Contact service center seconds rider ie orange FUME EVETYES Power shuts off H eral eceln tants ne Contact service center seconds working The Lamp Cover is Securely attach Lamp Cover unsecured 10 29IPU JBMOd Note
46. 88 VIEW PTV 843 9788 or contact us via the web at http www panasonic com contactinfo Video NR Noise Reduction Feature In the event of weak signal conditions the Video NR circuitry reduces noise in the luminance channel It is important to note that Video NR should remain Off for maximum picture detail when receiving a strong signal or viewing high quality video Press MENU to display the Main Menu screen Press to select Jace i ee OY Picture icon pm Picture amp PiE PB ricio A 7 Audio SELECT aT OK E Channel ms i ve y Photo Viewer as LIGHT Gin es Cn es TVVIDEO S A ANTENNA B Press to display Picture menu Press to select Other Adjust Picture PicMode Color Tint Brightness Picture Sharpness Normal Press to display the Other Adjust sub menu PIP CH SEARCH DVD VCR CH OPEN CLOSE Press to select Video NR Other Adjust Color Temp PIP SPLIT MOVE SWAP SS 3D Y C Color Matrix 3D I P ID1 Press to set On or Off On When signal is noisy Note Off When signal is high quality When an RGB signal is input Video NR is set to Off only 4 Press to exit menu 2 gt Q lt 9 O D Q O D a 9 Se O 5 73 3D Y C Feature Accurate separation of the picture s brightness and color signals allows you to enjoy a beautiful picture Press MENU to display the Main Menu screen Press to select gt EP
47. A Ore j j Picture Timer Picture icon Audio S Setup on lt lt Lock iT rn Viewer AB ou C TVVIDEO S A ANTENNA B Press to display Picture menu Press to select Other Adjust Picture PicMode Color Ti iit Brightness Picture Sharpness Normal Press to display the Other Adjust sub menu PIP CH SEARCH DVD VCR CH OPEN CLOSE Press to select 3D Y C SPLIT MOVE SWAP Color Temp Video NR Color Matrix 3D I P IDL Press to set On or Off On Usually set to On Off Set to Off if picture appears unnatural 4 EXIT Press to exit menu 74 For assistance please call 1 888 VIEW PTV 843 9788 or contact us via the web at http www panasonic com contactinfo Setting when 480p signals are input through COMPONENT VIDEO INPUT Adjust 480p signals to achieve a natural color from digital equipment connected to COMPONENT VIDEO INPUT Y PB PR input terminals Press MENU to display the Main Menu screen LIGHT se ein Press to select Picureicon EEN ae r gt 3 Dy icture imer Di Audio TVVIDEO S A ANTENNA B SELECT OK fChanne l 7 ay Photo Viewer Press to display Picture menu Press to select Other Adjust PicMode color Tint Brightness Picture Sharpness Normal Press to display the Other Adjust sub menu Press to select Color Matrix JANEE Color Temp Video NR 3D Y C 3D I P ID1 Pres
48. Automatic channel setting Automatically searches and adds receivable channels to memory Press MENU to display the Main Menu screen AP 1 _ Press to select QO a Setup icon TVVIDEO S A ANTENNA B Photo Viewer Press to display the options in the Setup menu Press to select Program CH icon Cio d Caption SELECT OK Lac i Press to display amp Other Adi the Program MENU gt Channel menu CableCARD Press to select Input Setup PIP CH SEARCH DVD VCR CH OPEN CLOSE D 4 0 Press to enter the sub menu PIP SPLIT MOVE SWAP Program Channel OK TETSEYZYITTTETS AANGE NU Auto scan to return eEXIT O ae a Migs as oy Change your Input Setup and press OK Press to select Cable Only Cable Antenna or Antenna Only Note TV or Cable Tuning mode must be set according to your connections Press to set Program Channel OK Teme CHANG ES MEN y N Ol ar Manual Program Auto scan is needed Signal Meter press OK to start Auto scan Continued on the next page For assistance please call 1 888 VIEW PTV 843 9788 or contact us via the web at http www panasonic com contactinfo Tuning channels Press to start Auto Scan Notes e If Cable Only Antenna Only or Antenna Cable is selected and DCM Digital Cable Module is not in the Auto Scan will perform Scan All e If Cable Only is selected and DCM is in Auto scan will be skipped e If Cable Antenna is selected
49. CR Infrared Codes Index Codes For VCR Codes For VCR Contd VCR 332 Oon Akai J ie 305 310 311 324 339 345 Pentax __ 300 311 345 Pioneer 328 eee 301 302 323 324 331 333 345 346 RCA 300 301 302 323 324 331 333 345 346 a J Scott 301 302 304 309 320 326 338 340 347 348 e 7 i Bell amp Howell Broksonic Canon Citizen Craig Curtis Mathes Daewoo DBX Dimensia Emerson Fisher Funai GE Goldstar Gradiente Hitachi Instant Replay Jensen Minolta Singer Tashiro For assistance please call 1 888 VIEW PTV 843 9788 or contact us via the web at http www panasonic com contactinfo Remote Control Quick Reference Guide Operating peripheral equipment CABLE CONVERTER BOX AND DVD CD PLAYERS Infrared Codes Index CBL Codes For Cable Box Codes For Cable Box Contd Brand Brand ode Puser U O Sl 213 O15 D Q a k e S m a S e _ a lt e O NO Go RO NO NO A oO AIO oX 4 gt Se NO a Oo 25 132 05 132 05 122 12 113 24 125 132 Archer Cableview Citizen Curtis oO N EENEN ENEN RS ENEN ENEN ENEN E O OJA O oO O AJo A S gt egal 12 118 140 141 142 145 14 gency embrandt msung cientific Atlanta mark prucer targate eleview xscan com shiba 05 132 137 11 112 113 01 105 05 110 05 110 01 105 astern GCbrand Gemini eneral 111 119 120 121 1
50. Card Menu Screen The screen below is displayed automatically when a card is inserted Iff NO CARD appears confirm that a card is correctly inserted Parent Folder Subfolder Returns currently The subfolder of displayed folder to the the currently parent previous displayed folder is folder opened Display Page No When the displayed files folders fill more than one page the total number of pages is displayed _ race 1 6 index Area Menu Area pz Folders and files are Select display method displayed here SINGLE PLAY or T Notes SLIDE SHOW ngA Ba e Up to 1 000 JPEG files can Confirm the displayed iG y a be displayed This number card type SD Card or kA CA may be lower if subfolders PC Card or files other than JPEG are C200 PANA included in the folder Depending on JPEG file type JPEG will be displayed instead of thumbnail image gt Q lt 9 O D Q O D a i 9 me O 5 ACCESS Indication Folder Name Area ACCESS is displayed The name of the selected while data is read subfolder framed in yellow is Note displayed Only JPEG files can be displayed 87 Photo Viewer SD Card PC Card MENU Area Operation Press to Cc select awe MENS fees Rese a TVVIDEO S A ANTENNA B Press to move to index area SINGLE A single image selected from the index area fills the screen You can also rotate the image and view image i
51. Closed Caption menu select Analog Closed Caption OK SE 5 lt 0 v7 lt lt r CHANG ER Press to select the to return EXIT desired setting CC1 CC2 CC3 CC4 T1 T2 T3 or T4 CC1 For video related information that can be displayed up to 4 lines of script on the screen where it does not obstruct relevant parts of the picture Script can be in any language CC2 to CC4 Other modes used for video related information T1 Blanks out a large portion of the picture on the television screen and displays program guide or any other information currently being transmitted T2 T3 and T4 Other modes that display information and blank out a large portion of the picture Digital The Digital Closed Captioning menu allows you to select the way in which you view digital captioning You can choose the type of closed captioning service font type font size and font style The colors sub menu lets you set the color of the font foreground text box background on which the text is displayed the font opacity Fore Opacity text box opacity Back Opacity and the outline of the dropshadow if selected under style 1 In Closed Caption menu select Digital Press to select i e o o REE Rr Wl o a a O a SELEC I OK each item CHANG EA Cc Mode lt Primary gt MENU casual TAR Sa i Digital Drop Shadow uo e19dO padueAPY Press to select desired setting Press to set Service pene Sem Sarees J Services Je
52. D Lamp 100 W HID High Intensity Discharge Lamp Channel Capability VHF UHF 2 69 ATSC NYSC Cable 1 135 RGB INPUT RGB analog 0 7 Vp p 75 QO D SUB15P 1 2 AUDIO 0 5 Vrms M3 Stereo mini Pin Jack VIDEO 1 0 Vp p 75 Q RCA Pin Jack AV INPUT 1 3 S VIDEO Y 1 Vp p 75 Q C 0 286 Vp p 75 Q Mini DIN 4 pin Input AUDIO L R 0 5 Vrms RCA Pin Jack x 2 Terminals COMPONENT Y 1 0 Vp p with sync 75 Q Pin Jack VIDEO INPUT PB PR 0 35 Vp p 75 Q Pin Jack x 2 1 3 AUDIO L R 0 5 Vrms RCA Pin Jack x 2 HDMI type A Connector AUDIO L R 0 5 Vrms RCA Pin Jack Type x 2 Card slot Output sianals VIDEO 1 0 Vp p 75 Q RCA Pin Jack av OUT S VIDEO Y 1 Vp p 75 QO C 0 286 Vp p 75 Q Mini DIN 4 pin AUDIO L R 0 5 Vrms RCA Pin Jack x 2 Tuner a digital tuner with digital cable module 1 259 mm W x 795 mm H 1 416 mm W x 897 mm H W x 1050 mm H Dimensions x 324 mm D x 389 mm D x 459 mm D WxHxD 49 9 16 W x 31 5 16 H 55 12 16 W x 35 5 16 H 64 7 16 W x 41 6 16 H x 12 6 8 D x 15 5 16 D x 18 1 16 D Weight Mass 32 1 kg 70 8 Ibs Net 38 4 kg 84 7 Ibs Net 46 8 kg 103 2 Ibs Net Operatina conditions Temperature 0 C 35 C 32 F 95 F p g Humidity 20 80 non condensing Note Design and Specifications are subject to change without notice Weight and Dimensions shown are approximate For assistance please call 1 888 VIEW PTV 843 97
53. Dealer or Servicenter purchase Parts and Accessories or make Customer Service and Literature requests by visiting our Web Site at http www panasonic com support or contact us via the web at httop www panasonic com contactinfo You may also contact us directly at 1 800 211 PANA 7262 Monday Friday 9 am 9 pm Saturday Sunday 10 am 7 pm EST For hearing or speech impaired TTY users TTY 1 877 833 8855 Accessory Purchases Purchase Parts Accessories and Instruction Books online for all Panasonic Products by visiting our Web Site at http www pasc panasonic com or send your request by E mail to npcpar ts panasonic com You may also contact us directly at 1 800 332 5368 Phone 1 800 237 9080 Fax Only Monday Friday 9 am to 8 pm EST Panasonic Services Company 20421 84th Avenue South Kent WA 98032 We Accept Visa MasterCard Discover Card American Express and Personal Checks For hearing or speech impaired TTY users TTY 1 866 605 1277 Service in Puerto Rico Matsushita Electric of Puerto Rico Inc Panasonic Sales Company Factory Servicenter Ave 65 de Infanteria Km 9 5 San Gabriel Industrial Park Carolina Puerto Rico 00985 Phone 787 750 4300 Fax 787 768 2910 As of October 2003 102 For assistance please call 1 888 VIEW PTV 843 9788 or contact us via the web at http www panasonic com contactinfo Limited Warranty PANASONIC CONSUMER PANASONIC SALES COMPANY ELEC
54. EARCH component If the procedure was successful the component will turn on SPLIT MOVE SWAP Operates Default D DBS STB amp CBL STB Preset _ Panasonic DBS Code Cable Preset Personal Video Recorders Panasonic Personal Video Recorder Cassette and VCR2 Code AUX Notes e Determine the manufacturer of the component and look in the table for the code e If the component does not operate with the Remote Control repeat the procedure using another code Some brands have multiple codes If an incorrect code is entered or if the procedure takes longer than 30 seconds the programming will fail For assistance please call 1 888 VIEW PTV 843 9788 or contact us via the web at http www panasonic com contactinfo Remote Control Quick Reference Guide Operating peripheral equipment Programming Without A Code This procedure searches all codes and is called the sequence method Setting to the remote using the step and set method When code is not known POWER 1 Confirm that the external component is plugged in and on Turn the component off TVVIDEO Ss A ANTENNA B Press OK and POWER together for at least 5 seconds 2 Cav_ Cer vw Press appropriate component button on the Remote Control 3 Press VOL gt to move forward to the next code l Press VOL lt to move backward Press the Remote Control POWER to test the component If the procedure was successful the component will turn on Note
55. ED A WARNING AS WITH ANY SMALL OBJECT SD CARDS CAN BE SWALLOWED BY YOUNG CHILDREN DO NOT ALLOW CHILDREN TO HANDLE THE SD CARD A CAUTION 1 This Device Display is intended to be used with the following TV stand model TY 43LC14C for the PT 43LCX64 TY 50LC14C for the PT 50LCX64 and TY60LC14C for the PT 60LCX64 Use with other stands may result in the Device Display becoming unstable possibly causing injury 2 This Device Display should not be exposed to direct sunlight extreme temperatures or moisture as this can result in serious irreparable damage 3 This product has a High Intensity Discharge HID lamp that contains a small amount of mercury It also contains lead in some components Disposal of these materials may be regulated in your community due to environmental considerations For disposal or recycling information please contact your local authorities or the Electronics Industries Alliance lt http www eiae org gt G D 5 U er D mr D Q The lamp has a maximum life of about 10 000 hours If use exceeds this figure the possibility of lamp damage becomes greater The lamp should be changed as soon as possible once the lamp warning message appears If the lamp is damaged please contact your nearest dealer Due to the characteristics and use conditions of individual lamps the lamp may cease to light before the stated lamp life Influences of frequent lighting continuous light use for o
56. INTERFACE POD INTERFACE p 16 DIGITAL AUDIO OUT terminal P 21 L DIGITAL AUDIO OUT Q AUDIO IN RGBT IN RGB Input 1 terminal P 22 O0 O0O0 C CIE J U O D Input 1 2 terminals P 17 DMI C SERVICE ONLY Card slot used by a certified service technician only Do not insert any memory card into this slot Antenna A B terminal PP 14 16 0o O Q C1 DCM INTERFACE B ANTENNA A Co SERVICE ONLY Cable In HDMI input terminal PP 24 25 R AUDIO IN L Homi AV IN D lt lt lt 4 w 7 w op OOOO 1 OOOO m i I D OIdAIV OOOO Component signal input 1 3 terminals P 18 AV OUT terminals PP 19 20 Notes Th G D 5 ro oR r D mr D Q RGB Input 2 terminal P 22 INPUT 3 Input 3 terminals P 17 e Make sure the vents are not blocked This could cause damage e Indication on the back panel may change without notice 13 14 Installation Notes on connections Turn off the power supply for all components before making any connections If the cables necessary for connecting a component to the system are not included with the component or available as an option you may need to fashion a cable to suit the component concerned Read the instruction manual for each system component carefully before connecting
57. Macrovision Reverse engineering or disassembly is prohibited U S Patents Nos 4 631 603 4 577 216 4 819 098 4 907 093 6 381 747 and 6 516 132 Dear Panasonic Customer Welcome to the Panasonic family of customers We hope that you will have many years of enjoyment from your new Device Display To obtain maximum benefit from your set please read these Instructions before making any adjustments and retain them for future reference Retain your purchase receipt also and record the serial number of your set in the space provided on the rear cover of these instructions Visit our Panasonic Web Site for USA www panasonic com USA For assistance please call 1 888 VIEW PTV 843 9788 or contact us via the web at http www panasonic com contactinfo Puerto Rico For assistance please call 787 750 4300 or visit us at www panasonicpr com FCC STATEMENT NOTE This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cau
58. OX amp He TVVIDEO S A ANTENNA B i E a i S Lock tup Press to display About menu 1022023014 5026017008 E N ES E X TT 9008127346 Press to exit menu PIP CH SEARCH DVD VCR CH OPEN CLOSE SPLIT MOVE SWAP gt Q lt 9 O D Q O D a 9 Se O 5 85 86 Photo Viewer SD Card PC Card Still image data JPEG made with a digital camera digital video camera or PC can be played back using an SD Card PC Card A WARNING As with any small object SD cards can be swallowed by young children Do not allow children to handle the SD card Displayable Image Formats Baseline JPEG 80 x 60 5 120 x 3 840 pixels Notes e Some parts of an image may not be displayed or the image may be displayed on a smaller scale depending on the size of the image e Only JPEG images can be displayed on this Device Display Card Data Protection Do not remove the card while it is being accessed Do not touch the terminals on the back of the SD Card PC Card Electrical interference electrostatic discharges and malfunctions of the unit or card may all result in damage to the card or data loss It is recommended that any important data also be backed up on a PC Stored data should be periodically backed up as a protection against data corruption data loss or device malfunction Please note that our company shall not accept any liability for damage or loss of stored data Caution e Alway
59. Press to exit menu Q2 4 For assistance please call 1 888 VIEW PTV 843 9788 or contact us via the web at http www panasonic com contactinfo 3 ea TVVIDEO S A ANTENNA B FREEZE PIP CH SEARCH TV VCR DVD VCR CH OPEN CLOSE CL Cv Ca CO PIP SPLIT MOVE SWAP Lock Feature Block Program Continued Canadian English Language Ratings The V CHIP used in this TV model allows you to block various types of movies and television programs based on the two rating systems used in Canada Press number keys to enter your secret code In Lock menu select Block Program and press OK to display the Block Program menu Press to select Block Program C E L R off viewable vViewabl viewabl viewabl viewabl viewabl viewabl MoM Press to enter the C E L R field 3 Mode Off Cannot view E Exempt programs On Can view E Exempt programs Press to select node Mod oe ed viewable viewable C8 viewable viewable PG viewable 14 viewable 18 viewable Press to select On or Off Press to set Block Program Press to select the desired rating level See page 65 MPAA on viewable viewable viewable Blocked Blocked Blocked Blocked Press to change the rating limit to Viewable or Blocked Press to exit menu gt Q lt o O D Q O D a 9 me e 5 61 Lock Feature Bl
60. R A PARTICULAR PURPOSE THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU SHOULD THE PROGRAM PROVE DEFECTIVE YOU ASSUME THE COST OF ALL NECESSARY SERVICING REPAIR OR CORRECTION 12 INNO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER OR ANY OTHER PARTY WHO MAY MODIFY AND OR REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE BE LIABLE TO YOU FOR AMAGES INCLUDING ANY GENERAL SPECIAL INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES END OF TERMS AND CONDITIONS How to Apply These Terms to Your New Programs If you develop a new program and you want it to be of the greatest possible use to the public the best way to achieve this is to make it free software which everyone can redistribute and change under these terms To do so attach the following notices to the program It is safest to attach them to the start of each source file to most effectively convey the exclusion of warranty and each file should have at least the copyright line and a pointer to where the full notice is found lt one line to give the program s name and an idea of what it does g
61. RFACE slot in the back of the projection television If no DCM is present and you try to access the Cable Module Info the message Cable Module not present will be displayed on screen To receive the features offered by your cable company you may have to subscribe to those services Press MENU to display the Main Menu screen OC tas LIGHT cs Press to select Setup Or 5 icon j i DE TVVIDEO S A ANTENNA B A a L W s ETEA YR tock 2 oe S Press to display the i Ae ut options in the Setup c menu Press to select Cable Module Info 4 Program CH Clo d Caption K gt Other Adij Press to display the n o Cable Module Info CableCARD FREEZE PIP CH SEARCH TVVCR DVDIVCRCH OPENCLOSE Press to exit menu PIP SPLIT MOVE SWAP Note Please contact your cable company regarding availability of the DCM Digital Cable Module The cable module is needed to receive premium digital services where available through the cable input You may also be able to order call ahead pay per view events For assistance please call 1 888 VIEW PTV 843 9788 or contact us via the web at http www panasonic com contactinfo About Screen The About screen displays assorted information about the Device Display Please have this information when calling Customer Care Center Press MENU to display the Main Menu screen Q CJ Wer vo E5 A Press to select i o O About icon Es Reve E
62. TRONICS COMPANY DIVISION DIVISION OF MATSUSHITA OF MATSUSHITA ELECTRIC ELECTRIC OF PUERTO RICO INC CORPORATION OF AMERICA Ave 65 de Infanteria Km 9 5 One Panasonic Way San Gabriel Industrial Park Carolina Secaucus New Jersey 07094 Puerto Rico 00985 Panasonic Multimedia Device Display Limited Warranty Limited Warranty Coverage If your product does not work properly because of a defect in materials or workmanship Panasonic Consumer Electronics Company or Panasonic Sales Company collectively referred to as the warrantor will for the length of the period indicated on the chart below which starts with the date of original purchase warranty period at its option either a repair your product with new or refurbished parts or b replace it with a new or a refurbished product The decision to repair or replace will be made by the warrantor CATEGORY PARTS LABOR SERVICE Digital Device Display One 1 Year One 1 Year In Home or Carry In During the Labor warranty period there will be no charge for labor During the Parts warranty period there will be no charge for parts You must carry in your product or arrange for in home service during the warranty period If non rechargeable batteries are included they are not warranted This warranty only applies to products purchased and serviced in the United States or Puerto Rico This warranty is extended only to the original purchaser of a new product which was not s
63. US TV PROGRAMS RATINGS Chart 2 R All Children The themes and elements in this TV Y program are specifically designed for a very young audience including children from ages 2 6 Directed to older children Themes and elements in this program may include mild physical or TV Y7 a l l comedic violence or may frighten children under the age of 7 General Audience It contains little or no TV G violence no strong language and little or not sexual dialogue or situations Parental guidance suggested The program may contain infrequent coarse language limited TV PG l violence some suggestive sexual dialogue and situations Parents strongly cautioned This program may TV 14 contain sophisticated themes sexual content strong and explicit sexual content Mature Audiences only This program may TV MA contain mature themes profane language graphic violence and explicit sexual content S See oD Dialogue with sexual content Canadian English Language Ratings Chart e General Audiens Pe Parental Guidance Canadian French Language Ratings Chart G General Audience Not recommended for young children Programming may not be suitable for 13 ans Progran under the age of 13 ie anes Programming is not suitable for children under the age of 16 18 ans Adults only uoijel9dO padueApy 65 66 Closed Caption Feature The Device Display includes a built in decoder capable of visually displaying the audio
64. a consequence of the rest of this License 12 If the distribution and or use of the Library is restricted in certain countries either by patents or by copyrighted interfaces the original copyright holder who places the Library under this License may add an explicit geographical distribution limitation excluding those countries so that distribution is permitted only in or among countries not thus excluded In such case this License incorporates the limitation as if written in the body of this License 13 The Free Software Foundation may publish revised and or new versions of the Lesser General Public License from time to time Such new versions will be similar in spirit to the present version but may differ in detail to address new problems or concerns Each version is given a distinguishing version number If the Library specifies a version number of this License which applies to it and any later version you have the option of following the terms and conditions either of that version or of any later version published by the Free Software Foundation If the Library does not specify a license version number you may choose any version ever published by the Free Software Foundation 14 If you wish to incorporate parts of the Library into other free programs whose distribution conditions are incompatible with these write to the author to ask for permission For software which is copyrighted by the Free Software Foundation write to the
65. aeeees 44 a SPI SCEO iorra E E anietes sense caeeeureaben saeanaeeaaneunecsteenntts 46 mr Searching for the desired channel Channel search cccsseeeeeeeeeeees 48 Favorite Channel Feature cccccccescesseeeeeeeeeeeseseeseeeneeeeeseeseseaneseneesnensaees 49 GEIS AdIUSUNENIS acca asc seme outa cet oh a ve cc ee we enna nied ease eee 50 Adjusting Screen position and SIZE ccccceeceeeeceeeseeeseneseneeeneseneeeneseneseneeenees 52 Audio PACU S CN AUS ssiri aa N R EGR 54 LOCK FEINE suina E EEE EA AEE 56 Closed Caption Feature nnnnnnnnnnnnsnnnnnrnnnnnrnnnnnnnnrnnnnnrnnnnnnnnnnnnnnnnnnnnnnnnn nnmnnn 66 gt Channel Caption Feature saisiiccccaiiecninccnscaninjanssnnknnnsagacsntavansbenpesaabaencsbagsanseenmeaneeia 69 Color Temp Fe Cia wise nies seins tines caine tees van sa aaseisnnas cenit en aeaeecusnssanceeumseltesaneeas 72 iY Video NR Noise Reduction Feature ccccccsceesseeeseeeeeeeeeeeseeneeseeeseneseees 73 Enjoy DVC F oU ee 74 z Setting when 480p signals are input through COMPONENT VIDEO INPUT 75 O More 3D I P Feature csssssssscsssesscssssssssesesssessssssesscsssseesessesstsssssesetsensaesnssesstsesseesensees 76 O Automatically changing screen size cccscceeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeees 77 G RGB IN Input Feature cise atteaneisenttetanitaisnrianlenrnsiaeie epsiyeectlatatielse recteneuniaian ede enuitonuweten 78 Sleep Timer Feature a
66. ages displayed on a wide screen TV will be cut off or distorted at the edges when viewing normal aspect images of 4 3 in ZOOM JUST or FULL mode Display in 4 3 mode to view the original image intended by the producer For 1080i and 720p input images screen size cannot be adjusted The adjusted setting will be kept even when the Device Display is turned off The signals output from the VIDEO OUT terminal on the back of the Device Display is not affected when the screen size and position is adjusted For assistance please call 1 888 VIEW PTV 843 9788 or contact us via the web at 1 Press to select the screen mode A 2 Press MENU to display the Main Menu screen 6 4 3 mode Position Size v Position H width Normal FULL mode Position Size v Position Normal EXIT W Press to select Setup icon Press to display the options in the Setup menu Press to select the Other Adj icon Press to display the Other Adjustment menu Press to select the Position Size Press to display Position Size sub menu Press to select each item Note at default Press to set or page SELECTA CHANG EK MENUQQWOEXIT SELECT A CHANGE MENUQ YOEXIT Press to exit menu Normal is displayed adjust to desired level See next Channel E Lock e j EXIT N Photo Viewer AR Program CH Clos d_Caption ow e f is ami
67. al Content Protection HDCP high definition picture source to the HDMI terminal of this unit high definition pictures can be displayed on the screen in their digital form The HDMI input terminal is not intended to be used with personal computers This unit is compatible with 10801 720p and 480p formats Select the output of the connected device to match that of the unit Connection diagram Follow the diagram below to connect the unit to a set top box or a DVD player When audio signal input is digital Set top box Homi AV IN The connector on the unit is HDMI Type A connector When audio signal input is analog Set top box R AUDIO IN L Homi HDMI OUT AUDIO OUT t t M D The connector on the unit is HDMI Type A connector Notes HDMI HDCP High Definition Multimedia Interface High Bandwidth Digital Copy Protection EIA CEA 861 861B Profiles compliance covers profiles for transmission of uncompressed digital video including high bandwidth digital content protection For assistance please call 1 888 VIEW PTV 843 9788 or contact us via the web at http www panasonic com contactinfo Installation Procedure Connect the HDMI output from the set top box or a DVD player to the HDMI input on the back of the unit e If you cannot display the picture because your Digital
68. amp is displayed The LAMP indicator is lit red Bie piace ain wine EW GNG ae MEE Wei tie MOkMakeee This is a characteristic of the lamp and not a malfunction po Leaving stationary images such as still video images web pages or filler bars used for e This is a characteristic of the LCD panel and not a malfunction Try NORMAL aspect mode on screen for an displaying constantly moving pictures which fill the entire screen or extended period of time can leave ghost turn the power OFF for a while to return the screen to normal images on the screen An OSD advising AIR FILTER CLEANING a e Please consult your nearest dealer is displayed When viewing with HDMI connection picture is displayed with unnatural colors as ifred e Change UV Timing from NORMAL to INVERT 53 and blue are reversed e This is a characteristic of the LCD panel and not a malfunction 100 Specifications PT 43LCX64 PT SOLCX64 PT GOLCX64 Power Source AC 120 V 60 Hz Bawerconsumoton Power ON Approx 240 W When audio is at maximum j Power OFF Approx 20 W When cooling fan is stopped 0 9 Poly silicon TFT LCD LCD panels 0 7 Poly silicon TFT LCD panel x 3 panel x 3 p 921 600 1 280 x 720 stripe pixels x 3 panels 16 9 921 600 1 280 x 720 stripe pixels x 3 panels 16 9 Display 43 inch 16 9 aspect ratio 50 inch 16 9 aspect ratio 60 inch 16 9 aspect ratio Speaker spoaersso wis w 18 10 THD HI
69. ance the balance of the section is intended to apply and the section as a whole is intended to apply in other circumstances It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest validity of any such claims this section has the sole purpose of protecting the integrity of the free software distribution system which is implemented by public license practices Many people have made generous contributions to the wide range of software distributed through that system in reliance on consistent application of that system it is up to the author donor to decide if he or she is willing to distribute software through any other system and a licensee cannot impose that choice This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License 8 If the distribution and or use of the Program is restricted in certain countries either by patents or by copyrighted interfaces the original copyright holder who places the Program under this License may add an explicit geographical distribution limitation excluding those countries so that distribution is permitted only in or among countries not thus excluded In such case this License incorporates the limitation as if written in the body of this License 9 The Free Software Foundation may publish revised and or new versions of the General Public License from time to time Such new versions will
70. and DCM is in Antenna B Analog amp Digital Auto scan will be performed Auto Scan To automatically Scan All available channels Antenna A Analog Antenna A Analog amp Digital Antenna B Analog and Antenna B Analog amp Digital Select Auto Scan and press OK to enter the sub menu OU Q 4 O O O D Q e Press to select program chase SELECT 0K Auto Scan item aes sean Meee E lal Antenna A Analog amp Digital Antenna B Analog 2 Press to start Auto Scan amp Press to exit menu Notes e Some channels with very weak signals may be locked into memory If desired these channels can be deleted manually using the Manual Program feature e Auto scan must be done when you select the input signal for the first time or whenever you change the antenna configuration 31 Tuning channels Manual channel setting Use this procedure when changing setting of receiving channels or changing the channel display To add or delete channels from either channel list A B manually Press MENU to display the Main Menu screen SAP C e LIGHT Press to select Fe Or A Setup icon 3 oe owen lt Prone WR Lock so Fy 7 EXIT 5 Photo Viewer AP ou TVVIDEO SS A ANTENNA B OK Press to display the options in the Setup menu Press to select Program CH icon 2 ClogSa Caption gt a t er Adi Press to display CableCARD the Program
71. ar library in non free programs enables a greater number of people to use a large body of free software For example permission to use the GNU C Library in non free programs enables many more people to use the whole GNU operating system as well as its variant the GNU Linux operating system Although the Lesser General Public License is Less protective of the users freedom it does ensure that the user of a program that is linked with the Library has the freedom and the wherewithal to run that program using a modified version of the Library The precise terms and conditions for copying distribution and modification follow Pay close attention to the difference between a work based on the library and a work that uses the library The former contains code derived from the library whereas the latter must be combined with the library in order to run 107 TERMS AND CONDITIONS FOR COPYING DISTRIBUTION AND MODIFICATION 0 This License Agreement applies to any software library or other program which contains a notice placed by the copyright holder or other authorized party saying it may be distributed under the terms of this Lesser General Public License also called this License Each licensee is addressed as you A library means a collection of software functions and or data prepared so as to be conveniently linked with application programs which use some of those functions and data to form executable
72. ary by being compiled or linked with it is called a work that uses the Library Such a work in isolation is not a derivative work of the Library and therefore falls outside the scope of this License However linking a work that uses the Library with the Library creates an executable that is a derivative of the Library because it contains portions of the Library rather than a work that uses the library The executable is therefore covered by this License Section 6 states terms for distribution of such executables When a work that uses the Library uses material from a header file that is part of the Library the object code for the work may be a For assistance please call 1 888 VIEW PTV 843 9788 or contact us via the web at http www panasonic com contactinfo derivative work of the Library even though the source code is not Whether this is true is especially significant if the work can be linked without the Library or if the work is itself a library The threshold for this to be true is not precisely defined by law If such an object file uses only numerical parameters data structure layouts and accessors and small macros and small inline functions ten lines or less in length then the use of the object file is unrestricted regardless of whether it is legally a derivative work Executables containing this object code plus portions of the Library will still fall under Section 6 Otherwise if
73. ation If an invalid operation is attempted the mark shown right is displayed Example Invalid operation was tried during FREEZE mode 39 ASPECT Controls The color monitor will allow you to enjoy viewing the picture at its maximum size including wide screen cinema format picture The aspect mode changes each time ASPECT is C T pressed LIGHT C4 JUST FULL TVVIDEO S A ANTENNA B FULL e When a 480p signal is being received the mode switches between 4 3 ZOOM and FULL only pe ZOOM _ FULL i e During PC input the mode switches between 4 3 FULL and TRUE only FULL TRUE PIP CH DVD VCR CH OPEN CLOSE SPLIT MOVE SWAP e When XGA and Mac 19 signal is input the aspect will be 4 3 and FULL only FULL Notes e When a 1080i or 720p signal is being received the mode is set to FULL and aspect switching is not possible e When input mode is CARD the mode is set to 4 3 and aspect switching is not possible Notes e However if the mode selected does not match the aspect ratio of the input signal the original picture quality may be affected e If using this Device Display in places such as cafes or hotels with the aim of displaying programs for a commercial purpose or for public presentation please note that by using the aspect ratio 16 9 selection function to change the aspect ratio you may be infringing on the rights of the original copyright owner of that program under copyright pro
74. be similar in spirit to the present version but may differ in detail to address new problems or concerns Each version is given a distinguishing version number If the Program specifies a version number of this License which applies to it and any later version you have the option of following the terms and conditions either of that version or of any later version published by the Free Software Foundation If the Program does not specify a version number of this License you may choose any version ever published by the Free Software Foundation 105 106 10 If you wish to incorporate parts of the Program into other free programs whose distribution conditions are different write to the author to ask for permission For software which is copyrighted by the Free Software Foundation write to the Free Software Foundation we sometimes make exceptions for this Our decision will be guided by the two goals of preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of software generally NO WARRANTY 11 BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE THERE IS NO WARRANTY FOR THE PROGRAM TO THE EXTENT PERMITTED BY APPLICABLE LAW EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND OR OTHER PARTIES PROVIDE THE PROGRAM AS IS WITHOUT WARRANTY OF ANY KIND EITHER EXPRESSED OR IMPLIED INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FO
75. ber 1 888 VIEW PTV 843 9788 This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions 1 This device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation For assistance please call 1 888 VIEW PTV 843 9788 or contact us via the web at http www panasonic com contactinfo Table of Contents A IMPORTANT SAFETY INSTRUCTIONS cccccccecccecececeecssssssssseseeseeneneneeeess 2 To Before USINO ieee eee er eee ne a ee ee ee eee ee ee eee eee 6 e Location Of CONOIS 53sec cate sw icc nee access Ea ai 10 D Start Installation cccccccsccssscsscessscssesessessecesseseusevsecesseceusesausevseseusesesseveseusevaseevneenss 14 co U mb Q mr D POW ON T OFF oreinen atte eee sin ew ete tects cen vn spe we ts ee we eae estes esis 26 S Basic Menu Navigation ani cesicccstesncecnnisncnseatacentbiacavaverastacnensnnctcbiicawesmenanteswnadesiont 28 N U Tuning channels eis castes te sence tay ces eee seach dacxvncuventacsosocsnancdendeapncusatyiecsonacsneamscedanvaes 30 Se Device display operation cccccccececeeeeeeeeneceeeeneeneseeeoneeeesenscesenseeesaneseesoneaes 34 O ASPEC CONOIS sieisireriai ee EEEa E EE TEE eee 40 Now Mute J Frec e SAFP oe eee ee ee eee ee ee eee 42 p Picture in Picture PIP SCreen cccccscssssseeceseeessseeeeeeeaseeeeeeeeeeesseeeeeeea
76. c Licenses are intended to guarantee your freedom to share and change free software to make sure the software is free for all its users This license the Lesser General Public License applies to some specially designated software packages typically libraries of the Free Software Foundation and other authors who decide to use it You can use it too but we suggest you first think carefully about whether this license or the ordinary General Public License is the better strategy to use in any particular case based on the explanations below When we speak of free software we are referring to freedom of use not price Our General Public Licenses are designed to make sure that you have the freedom to distribute copies of free software and charge for this service if you wish that you receive source code or can get it if you want it that you can change the software and use pieces of it in new free programs and that you are informed that you can do these things To protect your rights we need to make restrictions that forbid distributors to deny you these rights or to ask you to surrender these rights These restrictions translate to certain responsibilities for you if you distribute copies of the library or if you modify it For example if you distribute copies of the library whether gratis or for a fee you must give the recipients all the rights that we gave you You must make sure that they too receive or can get the source code If y
77. ce Our General Public Licenses are designed to make sure that you have the freedom to distribute copies of free software and charge for this service if you wish that you receive source code or can get it if you want it that you can change the software or use pieces of it in new free programs and that you know you can do these things To protect your rights we need to make restrictions that forbid anyone to deny you these rights or to ask you to surrender the rights These restrictions translate to certain responsibilities for you if you distribute copies of the software or if you modify it For example if you distribute copies of such a program whether gratis or for a fee you must give the recipients all the rights that you have You must make sure that they too receive or can get the source code And you must show them these terms so they know their rights We protect your rights with two steps 1 copyright the software and 2 offer you this license which gives you legal permission to copy distribute and or modify the software Also for each author s protection and ours we want to make certain that everyone understands that there is no warranty for this free software If the software is modified by someone else and passed on we want its recipients to know that what they have is not the original so that any problems introduced by others will not reflect on the original authors reputations Finally any free program i
78. colors as if red and blue are reversed Correct by setting the Color Corr to Off Default is On The OVER SCAN menu is added only when a 640 X 480 signal is input from the HDMI Input Adjustment ASPECT Overscan ON Overscan OFF item Normal display Picture is displayed smaller so it will fit on the screen Overscan Press OK button 4 3 mode O O gt Q lt 9 O Q O D a 9 me O 5 FULL mode 53 Audio Adjustments Press MENU to display the Main Menu screen Press to select ENG Audio icon oe Wrieture OTe OTR i lt gt Pian WE Loc o y 4 EXIT S Photo Viewer Aa 4 TVVIDEO Ss A ANTENNA B Press to display Audio menu SELECT A OK Press to select MENUQWOEXIT each item ar Note a Normal is displayed Other Adjust a at default Press repeatedly to select Mode Emits the original sound PIP CH SEARCH DVD VCR CH OPEN CLOSE eva a un The sound level is automatically an alee adjusted to suit the program source Sound suited to movies Music Sound suited to music Speech Sound suited to dialogue m Bass Increase or decrease the bass response m Treble Increase or decrease the treble response m Balance Emphasize the left right speaker volume Adjust to desired level while viewing picture through the menu overlay Press MENU or wait a few seconds to return to the previous menu screen ee 5
79. d for use with models PT 43LCX64 PT 50LCX64 and PT 60LCX64 Illustrations in this manual show the PT 50LCX64 Before connecting operating or adjusting this product please read the instructions completely Please keep this manual for future reference LSQT0857 A A IMPORTANT SAFETY INSTRUCTIONS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING To reduce the risk of electric shock do not remove cover or back No user serviceable parts inside Refer servicing to qualified service personnel This symbol warns the user This symbol alerts the The pictorial that uninsulated voltage user that important representation of a hot within the unit may have literature concerning surface within a triangle sufficient magnitude to the operation and is intended to tell the cause electric shock maintenance of this unit user that parts inside Therefore it is dangerous has been included the product are a risk of to make any kind of contact Therefore it should be burns to persons with any inside part of this read carefully in order to unit avoid any problems Note to CATV System Installer This reminder is provided to call the CATV system installer s attention to Article 820 40 of the NEC that provides guidelines for proper grounding and in particular specifies that the cable ground shall be connected to the grounding system of the building as close to the point of cable entry as practical A WARNING To reduce the risk of el
80. dicate your acceptance of this License to do so and all its terms and conditions for copying distributing or modifying the Program or works based on it 6 Each time you redistribute the Program or any work based on the Program the recipient automatically receives a license from the original licensor to copy distribute or modify the Program subject to these terms and conditions You may not impose any further restrictions on the recipients exercise of the rights granted herein You are not responsible for enforcing compliance by third parties to this License 7 If as a consequence of a court judgment or allegation of patent infringement or for any other reason not limited to patent issues conditions are imposed on you whether by court order agreement or otherwise that contradict the conditions of this License they do not excuse you from the conditions of this License If you cannot distribute so as to satisfy simultaneously your obligations under this License and any other pertinent obligations then as a consequence you may not distribute the Program at all For example if a patent license would not permit royalty free redistribution of the Program by all those who receive copies directly or indirectly through you then the only way you could satisfy both it and this License would be to refrain entirely from distribution of the Program If any portion of this section is held invalid or unenforceable under any particular circumst
81. dio output is allowed AV Out signal is available when receiving digital channel However all formats will be down converted to NTSC Never connect the VIDEO IN and OUT terminals to the same video recorder as this could cause incorrect operation Even if unit is in Split or PIP mode OUT terminals only output the main picture and sound signals A sub picture including channel search etc will not be output e AV terminals will not output Y Ps PR RGB HDMI IN or SD PC card signals e The S Video OUT terminal outputs the same signal that is input from the S Video IN terminal and Digital RF channels e Certain program content output from the AV Out connector may have the Macrovision signal modification applied to its signal preventing VCRs from recording this video signal 19 20 Installation How to connect the Amplifier Analog Audio Out To listen to the audio through a separate stereo system connect an external audio amplifier to AUDIO OUT on back of unit Stereo System A Stereo Amplifier and Speakers Note AUDIO OUT terminals cannot be connected directly to external speakers Audio Adjustments e Select Speakers Off in Audio menu under Other Adjust menu e Set amplifier volume to the preferred level For assistance please call 1 888 VIEW PTV 843 9788 or contact us via the web at http www panasonic com contactinfo Installation Digital Audio Out Use the diagram below to connect the Digital Audio O
82. e they do not excuse you from the conditions of this License If you cannot distribute so as to satisfy simultaneously your obligations under this License and any other pertinent obligations then as a consequence you may not distribute the Library at all For example if a patent license would not permit royalty free redistribution of the Library by all those who receive copies directly or indirectly through you then the only way you could satisfy both it and this License would be to refrain entirely from distribution of the Library If any portion of this section is held invalid or unenforceable under any particular circumstance the balance of the section is intended to apply and the section as a whole is intended to apply in other circumstances It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest validity of any such claims this section has the sole purpose of protecting the integrity of the free software distribution system which is implemented by public license practices Many people have made generous contributions to the wide range of software distributed through that system in reliance on consistent application of that system it is up to the author donor to decide if he or she is willing to distribute software through any other 109 110 system and a licensee cannot impose that choice This section is intended to make thoroughly clear what is believed to be
83. e Auto Scan All available channels with a signal will be programmed into memory Auto Scan This feature allows you to selectively auto scan channels You can Scan All Analog only channels or Analog amp Digital channels First Time Setup Sle IL IE C1 OK B Antenna A Analog Se er ee Sco Antenna A Analog amp Digital Procedure Press OK to start Auto Scan After Auto Scan is completed the unit tunes to the first channel found during auto scan Notes e If DCM Digital Cable Module is present during the First Time Setup and Antenna A is set to cable Antenna A will not be scanned due to the DCM providing the channel map e If setup is incomplete check connection of Antenna Cable to the RF IN Terminal then try Auto Scan again PP 30 31 Language The language of the on screen display is set to English as the factory setting You can select English Spanish or French as the on screen displays language SUrPSt Time Sarup 04 T CHAN GE Seay Om il T Auto scan to return Procedure Press lt VOL or VOL gt to select desired language then press OK to set e Auto scan must be done when you select the input signal for the first time or whenever you change the antenna configuration e Depending on conditions Auto scan may take a while WW Q 4 O O O D Q O 27 Basic Menu Navigation Pressing MENU SAP displays the Main QO m Menu screen i A AN ma o select the desire icon MENU Pre
84. e GNU GENERAL PUBLIC LICENSE 2 the software which is licensed under the GNU LESSER GENERAL PUBLIC LICENSE and 3 software developed by the third parties and available under certain terms and conditions For the software categorized as 1 and 2 please refer to the terms and conditions of the following GNU GENERAL PUBLIC LICENSE and GNU LESSER GENERAL PUBLIC LICENSE respectively If you wish to get further information as to the software please contact the web site below http www fsf org licenses and http www am linux jp GNU GENERAL PUBLIC LICENSE Version 2 June 1991 Copyright C 1989 1991 Free Software Foundation Inc 59 Temple Place Suite 330 Boston MA 02111 1307 USA Everyone is permitted to copy and distribute verbatim copies of this license document but changing it is not allowed Preamble The licenses for most software are designed to take away your freedom to share and change it By contrast the GNU General Public License is intended to guarantee your freedom to share and change free software to make sure the software is free for all its users This General Public License applies to most of the Free Software Foundation s software and to any other program whose authors commit to using it Some other Free Software Foundation software is covered by the GNU Library General Public License instead You can apply it to your programs too When we speak of free software we are referring to freedom not pri
85. e this license for certain libraries in order to permit linking those libraries into non free programs When a program is linked with a library whether statically or using a shared library the combination of the two is legally speaking a combined work a derivative of the original library The ordinary General Public License therefore permits such linking only if the entire combination fits its criteria of freedom The Lesser General Public License permits more lax criteria for linking other code with the library We call this license the Lesser General Public License because it does Less to protect the user s freedom than the ordinary General Public License It also provides other free software developers Less of an advantage over competing non free programs These disadvantages are the reason we use the ordinary General Public License for many libraries However the Lesser license provides advantages in certain special circumstances For example on rare occasions there may be a special need to encourage the widest possible use of a certain library so that it becomes a de facto standard To achieve this non free programs must be allowed to use the library A more frequent case is that a free library does the same job as widely used non free libraries In this case there is little to gain by limiting the free library to free software only so we use the Lesser General Public License In other cases permission to use a particul
86. ection on back of the unit Select Antenna mode for Cable Antenna Cable only Antenna only or in Input Setup under Program Channel in Setup menu Antenna connect only G D 5 oR r D mr D Q ANTENNA A TERMINAL ON THE BACK OF THE DEVICE DISPLAY Antenna and Cable connect VHF Antenna UHF Antenna y ANTENNA B TERMINAL ON THE BACK OF THE DEVICE DISPLAY Note When connecting an antenna only connect to Antenna A When connecting both an antenna and a cable connect the antenna to Antenna B In from cable 15 Installation Digital Cable Module Connection This module allows you to tune digital and high definition cable channels through the cable antenna Consult your Cable company on the availability of this module also called Point of Deployment POD module 1 Connect the Cable antenna to ANT A Cable In input on the back of the unit 2 Insert the DCM Digital Cable Module upper side facing left into the DCM INTERFACE POD INTERFACE slot on the back of the unit ad a gt ae ha a ee a _2 a L DIGITAL CI DOM INTERFACE B ANTENNA 7 OU SERVICE ONLY Cab In DIO IN L ES amp 1O DCM Digital Cable Module In from cable Notes e A Digital Cable Subscription is required See page 84 e Do not insert a PC card into the DCM INTERFACE POD INTERFACE e Choose Cable mode for Antenna A in Input Setup e Follow the
87. ectric shock fire injury to persons or damage to this product 1 Read all instructions before using connecting or adjusting this product 2 Retain these safety and operating instructions for future reference 3 Adhere to all warnings on the product and in this Operating Instructions manual 4 Follow all instructions carefully 5 Do not use this product near water for example near a bathtub wash bowl kitchen sink or laundry tub in a wet basement or near a swimming pool and the like Do not place objects filled with water such as a vase or the like on top of this unit 6 Clean only with a dry cloth Do not use liquid cleaners or aerosol cleaners 7 Do not block any ventilation openings Install only in accordance with the manufacturer s instructions Openings in the cabinet are provided for ventilation to ensure reliable operation and to protect it from overheating Never block openings by placing the product on a bed sofa or similar surfaces 8 Do not install near a heat source such as a radiator heat register stove or similar appliances including amplifiers Do not install in a built in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer s instructions have bee adhered to 9 Insert plug in outlet fully Do not defeat the safety purpose of the polarized or grounding type plug A polarized plug has two blades one wider than the other A grounding type plug has two blad
88. elect Favorite Favorite icon as m ptions SELECT Press to display the Favorite menu Press to select each item m Surf Mode Select Favorite or All Channels with Remote Control lt VOL or VOL P then press OK m RF Input Select Antenna A or Antenna B with Remote Control lt VOL or VOL gt then press OK m Channel Use the Remote Control lt VOL or VOL gt to select desired channels then press OK to add To delete channel press OK again while channel number is displayed Favorite AT Channels RFE Input Antenna CA Channel 4 cAr Press to exit menu gt Q lt o O D Q O D a 9 u e 5 49 50 Picture Adjustments Press MENU to display the Main Menu screen AP QO 1 Press to select gt EA AO Picture icon picture amer LIGHT Lav Ger oe L gt Suen het 7 I x ger Channel i LOCK TV VIDEO SP A ANTENNA B Press to display Br ae the Picture screen SELECT Press to select Picture each item Color Tint Brightness Picture Sharpness Note Normal l Normal is displayed AEASu at default RGB IN input SELECT CHANGE MENU Picture Contrast R Level G Level B Level Normal Other Adjust PIP CH SEARCH DVD VCR CH OPEN CLOSE SPLIT MOVE SWAP 3 m PicMode Lets you choose one of three pre set Picture Modes that best suits the program you are viewing Selecting this feature will also affect Color
89. es and a grounding prong The wide blade or grounding prong is provided for your safety If the provided plug does not fin into your outlet consult a qualified electrician to replace the obsolete outlet Protect the power cord from being walked or tripped over pinched or entangled 11 Use only attachments or accessories specified by the manufacturer Never place unit on support or stand that is not firm level and adequately strong The unit could fall causing serious injury to a child or adult and damage to the unit e Move any appliance and cart combination with care Quick stops excessive force and uneven surfaces may cause objects to overturn e Carefully fallow all instructions 13 Unplug this product during lightning storms or when unused for long periods of time Do not service this unit yourself Refer all servicing to qualified personnel Servicing is required when this product has been damaged in any way such as if the power cord is damaged liquid was spilled or objects were dropped into this unit or the unit was exposed to rain or moisture does not operate normally or has been dropped 15 Because the temperature of the lamp unit is elevated immediately after its use a direct touch to it may cause burns Replace the lamp unit only after it has cooled For assistance please call 1 888 VIEW PTV 843 9788 or contact us via the web at http www panasonic com contactinfo A IMPORTANT SAFETY INSTRUCTIONS CONTINU
90. ess to select inputs Input Labels that are set to SKIP cannot be selected when changing input modes with the Press to select preset Input TV VIDEO button etc Labels for inputs Press to set Press to select another input then repeat procedure for adding more labels to inputs Notes e To delete Input labels select desired input then press the lt VOL or VOL amp buttons until no label is displayed Press the OK button to enter your selection 5 BaT Press to exit menu Q2 gt Q lt 9 O D Q O D a 9 me Oo 5 71 72 Color Temp Feature To increase or decrease Warm red and Cool blue colors to suit personal preferences Press MENU to display the Main Menu screen C5 Press to select N gt OE TE Picture icon Picture z Timer 3 Audio Setup O m W o Z 4 TVVIDEO S A ANTENNA B e 7 ay Photo Viewer Press to display Picture menu Press to select Picture Other Adjust ei cMode Color Tint Brightness Picture Sharpness Normal Press to display the Other Adjust sub menu PIP CH DVD VCR CH OPENICLOSE AJC Press to select SPLIT MOVE SWAP Other Adjust D Se ae Color Temp Video NR 3D Y C E To oo ENE C Eaa so SEDAP E ID1 Sane Press to set Normal color Warm color more red Cool color more blue Press to exit menu Note During RGB input Color Temp changes to Normal For assistance please call 1 8
91. fan has stopped Unplug the power cord from the outlet Please wait more than one hour for lamp replacement If you need to replace the lamp more urgently The Device Display has a forced cooling feature After the POWER button is turned OFF and sometime during about the first minute of the normal cooling fan operation press the VOL button on the Device Display and the A button on the Remote Control at same time for more than 5 seconds The cooling fan operates for about 10 minutes Refer to the instructions enclosed with the lamp unit Part No TY LA1000 when replacing the lamp 91 92 Remote Control Quick Reference Guide Operating peripheral equipment Programming The Remote The Universal Remote Control can be programmed to operate many manufacturers components using the component function buttons for VCR DVD DBS RCVR or AUX Follow the procedures for programming your Remote Control with or without a code for the component Setting up the remote using the numerical keys When code is known 1 pa Confirm that the external component is plugged and operating Turn the component off Press OK and POWER together for at least 5 TVVIDEO S A ANTENNA B seconds Press appropriate component button on the Remote Control VCR DVD DBS RCVR CBL or AUX PVR or VCR2 Enter the 3 digit component code using the Remote Control number keys 0 9 buttons Press the Remote Control POWER to test the EPCH y S
92. file in INDEX AREA Press AV gt to display TVNIDEO S _A ANTENNA B next previous page of 9 thumbnail files Press OK to display file in full screen size Press The next image is displayed Press lt The previous image is displayed Press VW Each press rotates image 90 Note ae ae When changing folders or images the rotation setting is returned to the initial OPEN CLOSE pos ition SPLIT MOVE SWAP Press Press V Continued in left column of next page gt Q lt o O D Q O D a 9 me e 5 89 Photo Viewer SD Card PC Card Continued from page 89 Information Screen Display Press OK INFORMATION SCREEN is displayed Rotation angle is maintained Information Screen En e MA Pressing EXIT returns to SINGLE VIEW SCREEN Note If a file name exceeds 8 characters a file name different from the original is displayed Picture Adjustment When OK is pressed while the Information Screen is displayed the Picture Adjust menu p 50 is displayed Rotation angle is maintained Picture Adjust menu E Piciure SELECT OK Color RETURN AERXETET Tint a Brightness Picture Sharpness Normal Other adjust Pressing EXIT returns to SINGLE VIEW SCREEN Press EXIT with SINGLE VIEW screen displayed to return to the Index Area menu Slide Show Mode Press AV to select SLIDE and press OK Press AV 4 gt to move cursor to desired file in Index Area
93. hannel Caption Feature To enter preset and manual labels for desired stations Also to enter input labels for video inputs m Preset Labels To enter channel numbers for popular TV stations QO Press MENU to display the Main Menu screen LIGHT C Press to select Hanm Annon TVVIDEO S2 A ANTENNA B 5 A Channel Press to display the Ser p y Photo Viewer options in the Channel menu Press to select CHANNEL A Captions icon Favorite Press to display the Captions menu Press to select Preset Labels Press to enter Preset Labels listed PIP CH DVD VCR CH SPLIT MOVE SWAP 4 In the RF Input field select either Antenna A or Antenna B Note Only input with signal will be selectable gt Q lt 9 O D Q O D a 9 me e 5 Press to set Press to select desired preset caption 6 Press OK to enter the selection Then use the remote number keys to select desired channel refer to your local TV guide Note To delete a channel number while selected press lt VOL repeatedly until all numbers are removed EXIT F Press to exit menu 69 Channel Caption Feature Continued O men TVVIDEO S amp S A ANTENNA B a Ny EXIT O ae 5 o w sii ee T OS ep PAUSE STOP FREEZE PIP CH SEARCH wf a CH OPEN CLOSE eal PIP SPLIT MOVE SWAP sa na as as Manual Labels To enter numbers and capti
94. hat the Program does 1 You may copy and distribute verbatim copies of the Program s source code as you receive it in any medium provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty keep intact all the notices that refer to this License and to the absence of any warranty and give any other recipients of the Program a copy of this License along with the Program You may charge a fee for the physical act of transferring a copy and you may at your option offer warranty protection in exchange for a fee 2 You may modify your copy or copies of the Program or any portion of it thus forming a work based on the Program and copy and distribute such modifications or work under the terms of Section 1 above provided that you also meet all of these conditions a You must cause the modified files to carry prominent notices stating that you changed the files and the date of any change b You must cause any work that you distribute or publish that in whole or in part contains or is derived from the Program or any part thereof to be licensed as a whole at no charge to all third parties under the terms of this License c Ifthe modified program normally reads commands interactively when run you must cause it when started running for such interactive use in the most ordinary way to print or display an announcement including an appropriate copyright notice and a notice
95. he audio output terminal on the computer PC audio cable M3 stereo mini pin Conversion adapter If necessary RGB cable D SUB 15P RGB IN Terminal D SUB 15P Pin Layouts Pin No Signal name Pin No Signal name Connection port view 6 Ground for R Ground for G 8 Ground for B NC Not connected Notes e Some PC models cannot be connected to the set A conversion adapter is required to use the RGB cable D SUB 15P to connect a Macintosh computer to the set There is no need to use an adapter for computers with PC AT compatible D SUB 15P terminal The computer shown in the illustration is for example purposes only Additional equipment and cables shown are not supplied with this set The picture will become dark if an PC signal with a vertical scanning frequency of 62 Hz is input To obtain the optimum picture quality with the Device Display a vertical scanning frequency of 60 Hz is recommended Do not set the horizontal and vertical scanning frequencies for PC signals which are above or below the specified frequency range Select the desired RGB input position by pressing the TV VIDEO button P 37 Similar connections are available at the RGB IN 1 2 Terminals For assistance please call 1 888 VIEW PTV 843 9788 or contact us via the web at http www panasonic com contactinfo Installation RGB signals that can be input The table below lists the different types of RGB
96. his case the lamp will be insufficiently cooled and will take a while to turn ON again The Power Indicator ED ACTION Red Power OFF Standby mode Red blink Power OFF Now cooling Green ___ Power ON Green blink Power ON Preparing to light lamp Notes e If the POWER button is accidentally turned off during use after power is turned back on it may take a short period before the lamp automatically comes on e After the unit is turned on maximum picture brightness will be achieved in 5 10 minutes This is normal e This unit consumes approx 20 W in OFF condition when plugged into an AC outlet For assistance please call 1 888 VIEW PTV 843 9788 or contact us via the web at http www panasonic com contactinfo Power ON OFF First Time Setup For your convenience First Time Set up menu will be displayed on screen when the set is turned on for the first time If needed follow the menus and procedures displayed on screen for setting up the features E E GEC AUK TVVIDEO S A ANTENNA B SPLIT MOVE SWAP Notes Input Setup To select the configuration of RF input depending on the signal source Note No video will be displayed in this setup mode First Time Setup 5 om lt cable antennapr CHAN G EA ae ee Procedure Press VOL to select Cable only Cable Antenna or Antenna only Press OK to underline your selection When the next screen is displayed press OK to start th
97. http www panasonic com contactinfo Device display operation Changing the input signal The input source for picture signals can be changed by pressing TV VIDEO SD on the Remote Control or TV VIDEO on the unit Remote Control TVIVIDEO The input mode changes each time this ow button is pressed If SKIP is set as the Input Label setting of Channel Caption the mode will not be changed See page 771 n eee Coane Caer Coon Card input mode Photo Viewer is selected uolj e19doO dIseg Device display Unit TV VIDEO an Changing input is only possible if Cable Antenna is set as the Input Set setting TV Antenna B If SKIP is set as the Input Label setting of Channel Caption the mode will not be changed See page 771 Lo Photo Photo Viewer Signal of source connected to CARD SLOT is displayed 37 38 Device display operation 5 LIGHT C3 S S _A ANTENNA B CICL PIP CH SEARCH DVD VCR CH OPEN CLOSE SPLIT MOVE SWAP Unit Status display Press the RECALL Channel UP DOWN or TV VIDEO button except when the MENU screen is displayed to display current unit status information A 135 99999 ABC Del FAV TVNVIDEO Channel Banner Minimized Press Channel UP DOWN or TV VIDEO to minimize the channel banner display It will display the antenna input channel number and the station identification if available Antenna designation FNE BS oye he he kee
98. ignals similar to those found on CDs DTV Digital Television Name of the process whereby television picture and sound signals are changed to digital code for receiving and transmitting HDTV High Definition Television Television with improved picture quality by increasing vertical and horizontal resolution Before Using ATSC Advanced Television Systems Committee Standardization body that developed the Digital Television Terrestrial formats DCF Design rule for Camera File system Unified standard established by Japan Electronics and Information Technology Industries Association JEITA HDMI High Definition Multimedia Interface Interface that supports every uncompressed digital format as well as all existing multi channel audio format ona single cable JPEG Joint Photographic Experts Group A system used for compressing decoding color still pictures MPAA Motion Picture Association of America Guild governing rating assignments to movies NTSC National Television Systems Committee Standardization body that developed the Analog Television Terrestrial formats Password A four 4 digit code a user must provide in order to perform a function DCM Digital Cable Module A module that is required to receive premium digital services through the cable input Q D r U mr Q D Q Location of Controls Illuminated Remote Control POWER AP 1 18 LIGHT 19 2 22s
99. ing and the following message will be displayed e The LAMP indicator light will be lit when the Lamp s end of life is approaching Influences of frequent lighting continuous light use for over 24 hours the number of times lit the length of time between lightings etc may shorten lamp life Because of this we recommend having a replacement lamp on hand A WARNING Failure to follow these warnings when replacing the lamp unit could result in personal injury 1 The high pressure lamp could explode if not properly handled and lamp fragments could cause injury 2 N Because the temperature of the lamp unit is elevated immediately after its use touching it may cause burns Please allow the lamp to cool before handling or replacing the lamp unit 3 Handle the old lamp unit carefully It can explode if not handled with care 4 5 N Wear gloves and safety eyeglasses when replacing the lamp unit N If replacement of the lamp unit becomes necessary during the operation of the Device Display follow the procedure below a Press the POWER button on the Remote Control unit to turn off the power b Wait for about 1 minute until the cooling fan stops e The lamp cooling fan will continue to operate for about 1 minute after turning off the power Do not unplug the power cord from the outlet until the fan has stopped Avoid interrupting the power line by using circuit breakers or switchable power strips c After the cooling
100. it lf there is a lot of jitter in the video signal input from the video source the picture on the screen may flicker In this case it will be necessary to connect a TBC time base corrector A CAUTION When using Nut type RF coaxial cables tighten with fingers only Overtightening may damage terminals Connecting the Antenna Cable to the RF IN Terminal For proper reception of analog or digital cable channels a cable service connection is required Cable Connection Connect the cable supplied by your local cable company to ANTENNA A connection on back of unit Select Cable mode and ANTENNA A in SET UP menu under Program Channel CABLE BOX TERMINAL ON THE INPUT OUTPUT BACK OF THE i i Connect the cable from the CABLE BOX i antenna or cable system to the ANTENNA A terminal on the back of the Device Display HEHEHE amp In from cable In from cable Note Cable Mode is preset at the factory Antenna users must change to ANTENNA Mode for ANTENNA A in the Setup menu If you have both Cable and Antenna the Cable must be connected to ANT A For assistance please call 1 888 VIEW PTV 843 9788 or contact us via the web at http www panasonic com contactinfo Installation Antenna Connection For proper reception of digital and analog VHF UHF channels an external antenna is required For best reception an outdoor antenna is recommended Connect home antenna to either ANT A or ANT B conn
101. k Feature Block Program Continued U S TV Rating QO Cc The TV Parental Guidelines has 7 levels of age based ratings that can be sage selected These 7 levels are split into 2 age based groups Youth Age based LJ Ratings and Guidance Age based Ratings Some of these age based ratings can also have content based ratings denoted as D Dialog L Language S Sex TVMIDEO S _A ANTENNA B and V Violence See page 65 Press number keys to enter your secret code In Lock menu select Block Program and press OK to display the Block Program menu Press to select U S TV Press to enter the U S TV field 3 m Mode Off Cannot view NR programs On Can view NR programs Press to select Mode FREEZE PIP CH TVIVCR DVD VCR CH OPEN CLOSE WJ 4 PIP SPLIT MOVE SWAP SS eS Press to select On or Off Press to set Press to select the desired rating level See page 65 Press to change the rating limit to Viewable or Blocked Notes e The ratings such as TV PG TV 14 and TV MA have content level ratings also These content levels can be individually blocked Select the rating level press VOL gt to select the desired content level and press the OK button to block e The TV NR rating is independent of other ratings e If TV Y is blocked both TV Y and TV Y7 will be blocked However if you select TV Y7 the FV setting can be blocked or unblocked 5 EXIT
102. l compilation and installation of the executable However as a special exception the source code distributed need not include anything that is normally distributed in either source or binary form with the major components compiler kernel and so on of the operating system on which the executable runs unless that component itself accompanies the executable If distribution of executable or object code is made by offering access to copy from a designated place then offering equivalent access to copy the source code from the same place counts as distribution of the source code even though third parties are not compelled to copy the source along with the object code 4 You may not copy modify sublicense or distribute the Program except as expressly provided under this License Any attempt otherwise to copy modify sublicense or distribute the Program is void and will automatically terminate your rights under this License However parties who have received copies or rights from you under this License will not have their licenses terminated so long as such parties remain in full compliance 5 You are not required to accept this License since you have not signed it However nothing else grants you permission to modify or distribute the Program or its derivative works These actions are prohibited by law if you do not accept this License Therefore by modifying or distributing the Program or any work based on the Program you in
103. l number keys AV 1 Press 1 AV2 Press 2 AV3 Press 3 AV4 Press 4 CD Press 5 TUNER Press 6 PHONO Press 7 TAPE Press 8 AUX Press 9 To select AV Inputs or Components Remote Control Quick Reference Guide Operating peripheral equipment Operating a Receiver Program the remote to operate audio receiver TO DO THIS PRESS Surround VOL Down REW Surround VOL UP Center CH VOL Up Down EAS Operating a PVR Personal Video Recorder Program the Remote Control to use with a PVR TO DO THIS Turn on off Display PVR menu PVR Navigation Select a Channel R CH Up PIP CH PV Down Cr Cad PVRCH Up Down Notes e Not all functions listed may be controllable e Some TV Cable Box and DSS Receiver brands require you to turn on the power manually For assistance please call 1 888 VIEW PTV 843 9788 or contact us via the web at http www panasonic com contactinfo Troubleshooting Before you call for service determine the symptoms and make a few simple checks as shown below Symptoms Power does not turn ON e Is the power plug plugged in LAMP indicator blinks red dealer if not still repaired The POWER indicator flashes orange twice e The lamp cover is ajar Firmly replace the cover every 5 seconds The TEMP indicator flashes 2 or 4 times The power turns every 5 seconds OFF The TEMP indicator flashes 5 times every 5 e Please consult your nearest dealer seconds
104. n Note The color of the signal bar usually indicates the strength of the received signal e Green Adequate signal for a good reception e Yellow Poor signal strength e Red Very poor signal strength If a strong signal is received but has enough errors in the digital information the signal bars will be in red 6 EXIT Press to exit menu 82 For assistance please call 1 888 VIEW PTV 843 9788 or contact us via the web at http www panasonic com contactinfo Switching languages for display The language of the projection display is set to English as the factory setting To select one of 3 different languages for on screen displays follow the instructions below SAP mam TVVIDEO S A ANTENNA B P CH R DVD VCR CH OPEN CLOSE SPLIT MOVE SWAP Press MENU to display the Main Menu screen Program Channel Input Setup Manual Program Signal Meter Press to select Setup icon Press to display the options in the Setup menu Press to select Program CH icon Cio d Caption Press to display OK Tier Adi the Program r Channel menu eturn CableCARD Press to select Language Press to enter sub menu swo ai Sm Press to select the desired Language Press to set Press to exit menu uoi eiado padueApY 83 84 Cable Module Info This menu is used to provide information when a DCM Digital Cable Module is inserted into the DCM INTERFACE POD INTE
105. nformation PP 89 90 SLIDE Images are displayed one after another as a slide show Also the SPEED and Transition features p 90 can be used SD PC When both an SD Card and PC Card are inserted the lt b buttons can be used to select a card in the index area Index Area Operation Press to select icon FREEZE PIP CH SEARCH TV VCR DVD VCR CH OPEN CLOSE Press to set PIP SPLIT MOVE SWAP To select a page directly enter the page number with the Number Keys then press OK Select an Image file Display full size file preview Select a Subfolder Display files folders contained in the folder Select a Parent folder Make changes to the parent previous directory display Note File and folder names will not be displayed correctly if e More than 8 characters are used e Spaces and special symbols are used Use care when changing file and or folder names RETURN Operation EXIT Press EXIT to display RETURN EN MENU a fn Press AY to select an item RETURN Y z B and press OK RETURN TO MENU RETURN gt Returns to the parent previous folder RETURN TO MENU Returns to Menu Area screen For assistance please call 1 888 VIEW PTV 843 9788 or contact us via the web at http www panasonic com contactinfo Photo Viewer SD Card PC Card Single Play Mode 4 Press AV to select SINGLE and press OK Press AV gt to move cursor to PAGE 1 6 3 am LIGHT desired
106. ng that is normally distributed in either source or binary form with the major components compiler kernel and so on of the operating system on which the executable runs unless that component itself accompanies the executable It may happen that this requirement contradicts the license restrictions of other proprietary libraries that do not normally accompany the operating system Such a contradiction means you cannot use both them and the Library together in an executable that you distribute 7 You may place library facilities that are a work based on the Library side by side in a single library together with other library facilities not covered by this License and distribute such a combined library provided that the separate distribution of the work based on the Library and of the other library facilities is otherwise permitted and provided that you do these two things a Accompany the combined library with a copy of the same work based on the Library uncombined with any other library facilities This must be distributed under the terms of the Sections above b Give prominent notice with the combined library of the fact that part of it is a work based on the Library and explaining where to find the accompanying uncombined form of the same work 8 You may not copy modify sublicense link with or distribute the Library except as expressly provided under this License Any attempt otherwise to copy modify sublicense link with
107. ninanbcluedaniacs 64 P C PS WON AEE E E E E A EE 9 56 N ee 9 21 25 CC 9 66 Fs a EEEE AEE SESE EEES E ETE 87 Channel up down buttons UNit cccccccccessecseeseeseeeeee 12 34 peril fomecmeiecoe a CH buttons Remote Control sc c0cc cccsascecsoccecesescetceveresxecics 11 34 A A ee nl ceased aresseiee ahaa an Component signal input 1 3 terminals 43 POWER button POWER indicator Unit 12 26 34 see ede D R TUNE Dutton O 11 36 n Pee ee a a ee ee i 7 RECALL button Sees See eee aie oe ale ed ee see ee 11 38 DCM INTERFACE POD INTERFACE isinisi o oo a S ai a OUT terminal ssssssssssssssssrrirnssssnnrnnnnnnns o Reset User s Memory Functions ccccseeceeeeeeeeeeeeeeeaes 64 a RGB 1 2 POSitionS ccccccecececccesesececesesesescecseececeescecsesceceteceen 37 BF EEEE P PRE OEE E AAA 9 35 RGB eah E a 22 E RGB Input 1 2 TEIN Ss isicaeiaieed scosiacecnrecssavintasioncaneatecasen 13 a ee ha cde se hate octet te cae a 8 9 PONE SOC SN ria ncseieet exnccnias ie pneasseseasbunessiaihmbetmmntasicuetee ana 46 F S o SAP DUttON D 11 42 Freezing PICTUTES eee eters n entree tateterieentenenee tenes A20 SD Card E E E E annn 87 H ound MUIE sss ees E ee se 42 HDMI input terminal sos crcts casei coeesncces vapateceeanesaies Glacesevssetae aa 2 eee een E E ee 23 ADNI DOSIUON eee seo see seaeince se E E 37 T HDTV E E A AEE E A E A E A A A A E A A A A er ire er reer E E ere re A 9 TEMP indicator
108. notice and disclaimer of warranty keep intact all the notices that refer to this License and to the absence of any warranty and distribute a copy of this License along with the Library You may charge a fee for the physical act of transferring a copy and you may at your option offer warranty protection in exchange for a fee 2 You may modify your copy or copies of the Library or any portion of it thus forming a work based on the Library and copy and distribute such modifications or work under the terms of Section 1 above provided that you also meet all of these conditions a The modified work must itself be a software library b You must cause the files modified to carry prominent notices stating that you changed the files and the date of any change c You must cause the whole of the work to be licensed at no charge to all third parties under the terms of this License If a facility in the modified Library refers to a function or a table of data to be supplied by an application program that uses the facility other than as an argument passed when the facility is invoked then you must make a good faith effort to ensure that in the event an application does not supply such function or table the facility still operates and performs whatever part of its purpose remains meaningful d _ For example a function in a library to compute square roots has a purpose that is entirely well defined independent of the application
109. o TVVIDEO 3 _A ANTENNA B Er A Audio P Setup SELECT 1 ap Mice EXIT Press to display Photo Viewer Picture menu Press to select Other Adjust Picture Brightness Contrast R Level G Level B Level Normal Press to display the Other Adjust sub menu PIP CH SEARCH Press to select SELEC K K CATON desired RGB MENU QYEXIT a Other Adjust SPLIT MOVE SWAP input y RGB 2 Press to set VGA or 480P VGA When RGB input signal is VGA 60Hz from PC 480P When RGB input signal is 480P from other equipment Press to exit menu 78 For assistance please call 1 888 VIEW PTV 843 9788 or contact us via the web at http www panasonic com contactinfo Sleep Timer Feature The Device Display can be set to shut itself off at a preselected time Press MENU to display the Main Menu screen oa LIGHT m ees ote Byes io ecicai I ICture Imer Timer icon Cos Dio N A TVVIDEO S2 A ANTENNA B lt Audio tup SELECT i or BF 0 0 we Lock na Eg EXIT Photo Viewer ut Press to display Timer menu AOK 40D MENUQ YOEXIT Press repeatedly to select the desired time PIP CH c DVD VCR CH OPEN CLOSE SPLIT MOVE SWAP Press to exit menu gt Q lt o O D Q O D a i 9 me e 5 Notes e Pressing the RECALL button with sleep timer set displays remaining time e The on screen display will flash 3 2 and 1 to indicate the last three
110. ock Program Continued re Canadian French Language Ratings ex The V CHIP used in this TV model also lets you block or unblock Canadian French LIGHT f D programs according to various ratings categories TVVIDEO S A ANTENNA B C Press number keys to enter your secret code In Lock menu select Block Program and press OK to display the Block Program menu Press to select mmmmarrIrET C F L R off Press to enter the C F L R field 3 m Mode Off Cannot view E Exempt programs On Can view E Exempt programs remma Gs a Press to select a fc F L R J ans Viewable Mode Ie anst viewable m 18 ans viewable viewable viewable viewable FREEZE PIP CH SEARCH TVIVCR DVD VCR CH OPEN CLOSE CJI PIP SPLIT MOVE SWAP Press to select On or Off Press to set Press to select Block Program on the desired vicwabis 1 8 hae oo rating level See page 65 aQqaQ cke 16 ans Blocke 18 ans Blocke Press to change the rating limit to Viewable or Blocked 5 EXIT Press to exit menu For assistance please call 1 888 VIEW PTV 843 9788 or contact us via the web at http www panasonic com contactinfo How long Lock Feature This feature allows you lock the television input sources for a specific period of time Available selections are 12 hours 24 hours 48 hours or Always Press MENU to display the Main Menu screen
111. ogram on a volume of a storage or distribution medium does not bring the other work under the scope of this License 3 You may copy and distribute the Program or a work based on it under Section 2 in object code or executable form under the terms of Sections and 2 above provided that you also do one of the following a Accompany it with the complete corresponding machine readable source code which must be distributed under the terms of Sections l and 2 above on a medium customarily used for software interchange or b Accompany it with a written offer valid for at least three years to give any third party for a charge no more than your cost of physically performing source distribution a complete machine readable copy of the corresponding source code to be distributed under the terms of Sections and 2 above on a medium customarily used for software interchange or c Accompany it with the information you received as to the offer to distribute corresponding source code This alternative is allowed only for noncommercial distribution and only if you received the program in object code or executable form with such an offer in accord with Subsection b above The source code for a work means the preferred form of the work for making modifications to it For an executable work complete source code means all the source code for all modules it contains plus any associated interface definition files plus the scripts used to contro
112. old as is A purchase receipt or other proof of the original purchase date is required for warranty service Carry in or In Home Service For In Home or Carry In Service in the United States call 1 888 VIEW PTV 1 888 843 9788 For assistance in Puerto Rico call Panasonic Sales Company 787 750 4300 or fax 787 768 2910 In Home service requires clear complete and easy access to the product by the authorized servicer and does not include removal or re installation of an installed product It is possible that certain in home repairs will not be completed in home but will require that the product or parts of the product be removed for shop diagnosis and or repair and then returned Limited Warranty Limits And Exclusions This warranty ONLY COVERS failures due to defects in materials or workmanship and DOES NOT COVER normal wear and tear or cosmetic damage The warranty also does not cover damages which occurred in shipment or failures which are caused by products not supplied by the warrantor or failures which result from accidents misuse abuse neglect mishandling misapplication alteration faulty installation set up adjustments misadjustment of consumer controls power line surge lightning damage modification or commercial use such as in a hotel office restaurant or other business rental use of the product service by anyone other than a Factory Servicenter or other Authorized Servicer or damage that is attributable to acts
113. ons manually 1 In Channel menu select Caption and press OK to display the Caption menu Press to select Manual Labels Press to enter Manual Labels listed Captions Press to select RF Input Press to select Antenna A or Antenna B Press to set Note Only input with signal will be selectable Press to select Channel Press to select available channel number Press to select Caption Press to select first character position Press to set Press to select character refer to your local TV guide for labeling channels Continued on the next page 70 For assistance please call 1 888 VIEW PTV 843 9788 or contact us via the web at http www panasonic com contactinfo Channel Caption Feature Continued F Repeat 4 5 and 6 until all captions are added Up to 7 characters per channel 8 Use the remote number keys to select desired channel Note To delete the Channel Caption highlight the first character and press CH A or CH V until no character is displayed Move to 9 Press to exit menu the next character and repeat the process After all characters have been deleted press OK to enter the choice m Input Labels To label video input connections for onscreen display 1 In Channel menu select Caption and press OK to display the Caption menu Press to select Input Labels component 2 Component 3 HDMI Press to enter Input Labels listed Pr
114. opy of the GNU Lesser General Public License along with this library if not write to the Free Software Foundation Inc 59 Temple Place Suite 330 Boston MA 02111 1307 USA Also add information on how to contact you by electronic and paper mail You should also get your employer if you work as a programmer or your school if any to sign a copyright disclaimer for the library if necessary Here is a sample alter the names Yoyodyne Inc hereby disclaims all copyright interest in the library Frob a library for tweaking knobs written by James Random Hacker lt signature of Ty Coon gt 1 April 1990 Ty Coon President of Vice That s all there is to it 111 OTs OTPAO 18 23 M pa ee ee a 7 Main ON occcaetetcsia taamuen seven cuedohatnavaseneslaew awe ia aia 44 a ea ae a FPA cccasxatidlautnvtachiawnstiahbotiestdedsdneslensencasderautetsenbavietantedtasatns 9 59 TAOD ee eee eee re ee ee ee eee 18 23 WAS C sucivn icrccssreninvvisiddbviicn guyitenstbuntans unset EEEE EEEE EEEE EEE annan 8 9 A MUTE Dutton raona anaana naana Ena AEAEE EEEE a annann qi Antenna A B terminal c cc ceceeeceececeeeececeeeeseeeseeseeeeneeeeeeas 13 N ASPECT DUULOM nninenonrnrnrnnnnininininennnnn M40 NTSC o Auto iiai E i EAEE E AEE A E EE ee cin EEA E EAA EAE 39 Ce KEYS essers ersenistai eer ianEnn nananana 13a B O 2 S a EE EE EEEE 55 OR TUO ep E een entrees 11 Blocking Message coianicscdscasinn dias to rancctadueiiniaitusa
115. ou link other code with the library you must provide complete object files to the recipients so that they can relink them with the library after making changes to the library and recompiling it And you must show them these terms so they know their rights We protect your rights with a two step method 1 we copyright then library and 2 we offer you this license which gives you legal permission to copy distribute and or modify the library To protect each distributor we want to make it very clear that there is no warranty for the free library Also if the library is modified by someone else and passed on the recipients should know that what they have is not the original version so that the original author s reputation will not be affected by problems that might be introduced by others Finally software patents pose a constant threat to the existence of any free program We wish to make sure that a company cannot effectively restrict the users of a free program by obtaining a restrictive license from a patent holder Therefore we insist that any patent license obtained for a version of the library must be consistent with the full freedom of use specified in this license Most GNU software including some libraries is covered by the ordinary GNU General Public License This license the GNU Lesser General Public License applies to certain designated libraries and is quite different from the ordinary General Public License We us
116. portion of broadcasts which feature Closed Captioning CC You can set your preferences for both digital and analog Closed Captioning CC Mode SAP Activates the On Screen Closed Caption feature When activated this feature 3 will remain on until OFF is selected in this menu TVVIDEO S A ANTENNA B Press MENU to display the Main Menu screen Press to select Setup icon Press to display the options in the Setup menu Press to select Closed Caption icon Press to display the Other Adi Closed Caption Nu Exit menu CableCARD STOP REC oS on sD PIP CH SEARCH DVD VCR CH OPEN CLOSE Press to select CC Mode SPLIT MOVE SWAP Press to enter the CC Mode field Press to select desired setting e Off No display e On Display when available e On Mute Display when audio is muted Notes e The closed caption or text signal may be broadcast over Press to set C1 C2 or both Also text Co OOE ean gt o contents can vary so you may cc mode Setting menu NE wish to try different settings o Closed Caption is not displayed if the input signal is COMPONENT VIDEO INPUT of 480p or more or from RGB IN 5 EXIT Press to exit menu 9 4 For assistance please call 1 888 VIEW PTV 843 9788 or contact us via the web at http www panasonic com contactinfo Closed Caption Feature Analog This option lets you choose the closed caption service you desire 1 In
117. r comfortable viewing Avoid placing where sunlight or other bright light including reflections will fall on the screen Use of some types of fluorescent lighting can reduce Remote Control transmitter range Adequate ventilation is essential to prevent internal component failure Keep away from areas of excessive heat or moisture Optional External Equipment The Video Audio connection between components can be made with shielded video and audio cables For best performance video cables should utilize 75 coaxial shielded cables Cables are available from your dealer or electronic supply house Before you purchase any cables be sure you know what type of output and input connectors your various components require Also determine the length of cable you ll need Safety Precaution Please take safety precautions to prevent the unit from falling over A WARNING The unit may tip or fall if not situated on a stable surface if pushed or during an earthquake Use a strong rope or chain not included to fasten the Device Display firmly to a strong wall support For assistance please call 1 888 VIEW PTV 843 9788 or contact us via the web at http www panasonic com contactinfo Before Using Accessories 1 Remote Control EUR 76272Z10 2 Batteries 2 AA 3 RGB Cable 2m LSJA0239 1 or LSJA0443 G D 5 ro U D mr D Q Viewing position To optimize your viewing comfort please follow the viewing
118. r temporary unlock Note Entering the password will override the block condition However the ratings selection will be retained Reset User s Memory Functions Use when moving unit to a new location or if the secret password is forgotten Procedure VOL Press the VOL button on the unit and OK button on the Remote control at same time for more than 5 seconds When reset is th finished power shuts off automatically For assistance please call 1 888 VIEW PTV 843 9788 or contact us via the web at http www panasonic com contactinfo US MOVIES RATINGS Not Rated by MPAA G GENERAL AUDIENCES All ages admitted PARENTAL GUIDANCE SUGGESTED Some material may not be suitable for children PARENTS STRONGLY CAUTIONED Some PG 13 material may be inappropriate for children RESTRICTED Under 17 requires accompanying parent or adult guardian NC 17 JNO ONE 17 AND UNDER ADMITTED X ADULTS ONLY US TV PROGRAMS RATINGS Chart 1 Age based Age based_ Possible Content Group Ratings Selections NR Not e Viewable Rated La e Blocked e Viewable e Blocked e FV Fantasy Violence e Viewable e Blocked TV Y Youth TV Y7 e Viewable me e Blocked e D L S V all selected meer e Any combination of D L S V aii D L S V all selected TV 14 L S V all selected e Any combination of D L S V e L S V all selected e Any combination of L S V TV MA Lock Feature
119. s The Library below refers to any such software library or work which has been distributed under these terms A work based on the Library means either the Library or any derivative work under copyright law that is to say a work containing the Library or a portion of it either verbatim or with modifications and or translated straightforwardly into another language Hereinafter translation is included without limitation in the term modification Source code for a work means the preferred form of the work for making modifications to it For a library complete source code means all the source code for all modules it contains plus any associated interface definition files plus the scripts used to control compilation and installation of the library Activities other than copying distribution and modification are not covered by this License they are outside its scope The act of running a program using the Library is not restricted and output from such a program is covered only if its contents constitute a work based on the Library independent of the use of the Library in a tool for writing it Whether that is true depends on what the Library does and what the program that uses the Library does 1 You may copy and distribute verbatim copies of the Library s complete source code as you receive it in any medium provided that you conspicuously and appropriately publish on each copy an appropriate copyright
120. s e Similar connections are available at the COMPONENT VIDEO INPUT 1 3 Terminals e Select the desired COMPONENT VIDEO INPUT position by pressing the TV VIDEO button P 37 e Component video signals that can be input are 480i 480p 720p and 1080i Component Signals Y Ps PR that can be Input Signal data Mode t Information menu OUELype No of dots Horizontal frequency Vertical frequency display HX V kHz Hz 480p 720 X 483 31 47 59 94 480 p 720p 1 280 X 720 45 00 60 00 720 p 1080i 1920 X 1 080 33 75 30 00 1080 i Note Input signals other than those listed with a mark will give you a beautiful stable picture DTV Format Signals For assistance please call 1 888 VIEW PTV 843 9788 or contact us via the web at http www panasonic com contactinfo Installation How to connect the AV OUT Terminals You can connect a VCR to the AV OUT terminal to record the program you are viewing on screen An external monitor can also be connected to the AV OUT terminals Connect the VCR as shown below G D pane U ar Q gt m n D Q Recording Equipment S VHS VHS VCR GOO OO 000 FO Audio Video S Video R IN L IN Oc Im mE e r t t a Notes e This unit contains Video and Audio Outputs for the purpose of recording television programming to VCR Due to license restrictions if a device STB DVD etc is connected to the HDMI input of the unit no video or au
121. s insert card in the correct direction Failure to do so may result in damage to the card and this unit e The SD Card and PC Card are precision devices Do not subject them to excessive pressure or strong impacts Folders and Files Digital cameras that are compliant with DCF specifications use folders with a specific structure The following diagram shows an example of the folder structure DCIM Folder The digital camera creates this folder automatically Example If the Card file hierarchy is displayed on the PC as shown in diagram at below 100_PANA Folder Folder names consist of a 3 digit folder number which is followed by five arbitrary characters Digital camera images are stored within these folders JPEG files in the 100 _PANA folder are displayed when a Card which is structured as shown left is inserted To display another folder see page 88 Index Area Operation 1100 PANA P1000001 jpg Note P1000002 jpg The folder and file name may vary according to the P1000003 jpg digital camera being used P1000004 jpg P1000001 JPG DCF File 101 PANA File names consist of four arbitrary characters followed P1010001 jpg by a 4 digit file number DCF files are image files P 1010002 jpg NO _P1010003 jpg normally JPEG files that have been taken by a digital P1010004 jpg camera For assistance please call 1 888 VIEW PTV 843 9788 or contact us via the web at http
122. s not muted Freezing pictures FREEZE TV VCR j et PIP CH SEARCH DVD VCR CH OPEN CLOSE PIP SPLIT MOVE SS Note Projection can be switched between a frozen still picture and a moving picture each time FREEZE on the Remote Control unit is pressed Press FREEZE again to resume motion The video output from AV OUT is not frozen Select Audio Mode for TV Viewing In digital mode SAP UES Press SAP to select the next audio track if available when receiving a digital channel Audio Track 1 of 1 Continued on the next page For assistance please call 1 888 VIEW PTV 843 9788 or contact us via the web at http www panasonic com contactinfo Mute Freeze SAP In analog mode Press SAP button to select the desired audio mode as described below Th Arrow shows selection e Each press of SAP button will change the audio mode as shown below e SAP is selected with first press of SAP button Example STEREO STEREO STEREO lt SAP SAP SAP MONO MONO MONO Receivable Broadcast Types The following are possible broadcast types with their accompanying on screen displays The signal being received is indicated with a mark while the selected audio mode is indicated with an arrow OU Q 2 O O G D Q O MTS Stereo and SAP broadcast Multi channel Television Sound Stereo main language and Secondary K STEREO
123. s threatened constantly by software patents We wish to avoid the danger that redistributors of a free program will individually obtain patent licenses in effect making the program proprietary To prevent this we have made it clear that any patent must be licensed for everyone s free use or not licensed at all The precise terms and conditions for copying distribution and modification follow TERMS AND CONDITIONS FOR COPYING DISTRIBUTION AND MODIFICATION 0 This License applies to any program or other work which contains a notice placed by the copyright holder saying it may be distributed under the terms of this General Public License The Program below refers to any such program or work and a work based on the Program means either the Program or any derivative work under copyright law that is to say a work containing the Program or a portion of it either verbatim or with modifications and or translated into another language Hereinafter translation is included without limitation in the term modification Each licensee is addressed as you Activities other than copying distribution and modification are not covered by this License they are outside its scope The act of running the Program is not restricted and the output from the Program is covered only if its contents constitute a work based on the Program independent of having been made by running the Program Whether that is true depends on w
124. s to set SD or HD SD When the input signal is a normal TV system NTSC HD When the input signal is a High Definition system HD 4 EXIT Press to exit menu a 4 Note Color Matrix does not need to be set when using Hi Definition equipment or 480i output equipment gt Q lt 9 O D Q O D u 9 me e 5 19 3D I P Feature Film media taken at 24 frames per second is faithfully reproduced on the Device Display 4 a oe 1 TVVIDEO 5S A ANTENNA B Press to select Picture icon Press to display Picture menu Press to select Other Adjust Press to display the Other Adjust sub menu PIP CH SEARCH DVD VCR CH OPEN CLOSE Press to select 3D I P SPLIT MOVE SWAP or Off Press to set On Press MENU to display the Main Menu screen m Picture Timer 2 Audio lt Setup ee lt Lock Kou once Viewer Picture PicMode Color Tint Brightness Picture Sharpness Normal Other Adj Color Temp video NR 3D Y C Color Matrix ID1 On Recordings created at 24 frames per second are shown in higher quality Off Set to Off if picture appears unnatural 4 EXIT Press to exit menu 76 For assistance please call 1 888 VIEW PTV 843 9788 or contact us via the web at http www panasonic com contactinfo Automatically changing screen size If the received signal contains screen size specifications
125. se channels can be deleted manually using the Manual Program feature 33 34 Device display operation Operation can be done from the Device Display LIGHT Oe oy a oes FR o HQ TVVIDEO Ss A ANTENNA B PIP CH DVD VCR CH OPEN CLOSE PIP SPLIT MOVE SWAP Zgan Notes POWER button POWER indicator Volume up down buttons Channel up down buttons TV VIDEO button Press to operate the Device Display with the Remote Control Press to turn the Device Display on Press to select the desired channel Note Refer to Channel Up Down Tuning See page 36 Use number keys Note Refer to Direct Tuning Method See next page Press to select the desired volume level e The channel number and volume level are stored even after the Device Display is turned off e Power consumption can be reduced if the volume level is lowered For assistance please call 1 888 VIEW PTV 843 9788 or contact us via the web at http www panasonic com contactinfo Device display operation Channel and Program Tuning Channel and Program tuning in digital television differs from conventional television With DTV many programs can exist within a single 6 MHz channel These channels behave as sub channels within a single channel When tuning to a digital channel the Device Display will also tune to a program and will indicate the channel
126. se harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures e Reorient or relocate the receiving antenna e Increase the separation between the equipment and receiver e Connect the equipment into an outlet on a circuit different from that to which the receiver is connected e Consult the dealer or an experienced radio TV technician for help FCC CAUTION To assure continued compliance and prevent undesirable interference use only the provided shielded RGB cable with 2 ferrite cores while connecting the Device Display to a computer Any changes or modifications not expressly approved by the party responsible for compliance could void the user s authority to operate this equipment ANY CHANGES OR MODIFICATIONS TO THIS PTV RECEIVER NOT EXPRESSLY APPROVED BY MATSUSHITA ELECTRIC CORPORATION OF AMERICA COULD CAUSE HARMFUL INTERFERENCE WHICH WOULD VOID THE USER S AUTHORITY TO OPERATE THIS EQUIPMENT iO The Class II insulation symbol square within a square indicates that this product has been evaluated and tested to comply with Class II insulation requirements Declaration of Conformity Models Number PT 43LCX64 PT 50LCX64 PT 60LCX64 Trade Name Panasonic Responsible party Matsushita Electric Corporation of America Address One Panasonic Way Secaucus New Jersey 07094 Telephone num
127. should also get your employer if you work as a programmer or your school if any to sign a copyright disclaimer for the program if necessary Here is a sample alter the names Yoyodyne Inc hereby disclaims all copyright interest in the program Gnomovision which makes passes at compilers written by James Hacker lt signature of Ty Coon gt 1 April 1989 Ty Coon President of Vice This General Public License does not permit incorporating your program into proprietary programs If your program is a subroutine library you may consider it more useful to permit linking proprietary applications with the library If this is what you want to do use the GNU Library General Public License instead of this License For assistance please call 1 888 VIEW PTV 843 9788 or contact us via the web at http www panasonic com contactinfo GNU LESSER GENERAL PUBLIC LICENSE Version 2 1 February 1999 Copyright C 1991 1999 Free Software Foundation Inc 59 Temple Place Suite 330 Boston MA 02111 1307 USA Everyone is permitted to copy and distribute verbatim copies of this license document but changing it is not allowed This is the first released version of the Lesser GPL It also counts as the successor of the GNU Library Public License version 2 hence the version number 2 1 Preamble The licenses for most software are designed to take away your freedom to share and change it By contrast the GNU General Publi
128. signals that can be input If a signal which differs greatly from any of the types listed below is input the picture image may not be displayed correctly or a black background may be displayed At this time signal will flash in the on screen display for about 5 seconds Signal data Information menu Mode type No of dots Horizontal frequency Vertical frequency display H X V kHz Hz Notes e Input signals other than those listed with a mark will give you a beautiful stable picture e The D SUB15P connector can accept RGB H V sync separate and RGB sync on green However it is not guaranteed to display stable color when using RGB sync on green e When used with an external video processor scaler it must have RGB H V sync separate output G D 5 U er D mr D Q a c D a O Q O c r O A DTV Format Signals 23 24 Installation How to connect the HDMI input terminal About HDMI HDMI is the first all digital consumer electronics A V interface that supports several uncompressed standard enhanced and high definition video format as well as all existing multi channel audio formats One jack supports both video and audio information The HDMI HDCP input can be connected to an EIA CEA 861 861B compliant consumer electronic device such as a set top box or DVD player equipped with a HDMI output connection By inputting a High bandwidth Digit
129. single screen O Z rs TVVIDEO S A ANTENNA B PAUSE STOP REC FREEZE PIP CH SEARCH TVIVCR DVD VCR CH OPEN CLOSE PIP SPLIT MOVE SWAP When a channel button is pressed during channel Notes search e To end channel search press SEARCH OPEN CLOSE Number keys e While using the PIP feature Channel Example When 6 is pressed channel 6 is displayed in single screen search is not available Channel search feature works with Channel up and down buttons analog channels only ATSC channel When A or is pressed the next channel up or down is displayed in search is not possible single screen When CARD and HDMI input screen is Example Select channel 6 displayed no search is possible Channel search feature works only if signal is from Antenna A Sound from the left screen is output from the speakers on the Device Display set For assistance please call 1 888 VIEW PTV 843 9788 or contact us via the web at http www panasonic com contactinfo Favorite Channel Feature Allows you to create a Favorite channel list from Antenna A or Antenna B QO mam TVVIDEO S A ANTENNA B PIP CH SEARCH DVD VCR CH OPENICLOSE SPLIT MOVE SWAP Press MENU to display the Main Menu screen MENU Press to select z Wreture O Audio lt Afe A Wy 2 Serie a Lock o ae Photo Viewer E B Channel icon Press to display the options in the Channel menu CHANNEL PS s Press to s
130. ssing SAs A MEN asain on AY displays previous level menu Note Depending on the signal D 7 f A T Audio _ Setup being input some items may or may not be adjustable and some functions may or may not be available Lock PIP CH DVD VCR CH PIP SPLIT MOVE SWAP Picture Color 82 ae Ce F32 Brightness SSS 27 Palette Sars as Sie Paimsess SSS a2 Normal ase Other We to select desired menu item SELECT CHANGE MENU Picture PicMode Ti nE Brightness Picture Sharpness Normal Other Adjust Continued in left column of next page For assistance please call 1 888 VIEW PTV 843 9788 or contact us via the web at http www panasonic com contactinfo Continued from page 28 to adjust or set desired menu item Note For Other Adjust sub menu to select Other Adjust Picture PicMode eolon Tint Brightness Picture Sharpness Normal to access Other Adjust sub menu Other Adjust Video NR sD G o lor Mat Fix 3D I P ID1 Continued in right column Basic Menu Navigation Continued from left column to select desired sub menu items Other Adjust Color Temp SD VE Color Matrix 3D I P ID1 to select desired sub menu items Other Adjust eo M Eo M re Len p 3D Y C Golore Mat rf D 3D I P ID1 Note To EXIT menus Press MENU repeatedly until normal picture is displayed uoi eiado dIseg Tuning channels
131. t Copyright C lt year gt lt name of author gt This program is free software you can redistribute it and or modify it under the terms of the GNU General Public License as published by the Free Software Foundation either version 2 of the License or at your option any later version This program is distributed in the hope that it will be useful but WITHOUT ANY WARRANTY without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE See the GNU General Public License for more details You should have received a copy of the GNU General Public License along with this program if not write to the Free Software Foundation Inc 59 Temple Place Suite 330 Boston MA 02111 1307 USA Also add information on how to contact you by electronic and paper mail If e program is interactive make it output a short notice like this when it starts in an interactive mode Gnomovision version 69 Copyright C year name of author Gnomovision comes with ABSOLUTELY NO WARRANTY for details type show w This is free software and you are welcome to redistribute it under certain conditions type show c for details The hypothetical commands show w and show c should show the appropriate parts of the General Public License Of course the commands you use may be called something other than show w and show c they could even be mouse clicks or menu items whatever suits your program You
132. t alter all the notices that refer to this License so that they refer to the ordinary GNU General Public License version 2 instead of to this License If a newer version than version 2 of the ordinary GNU General Public License has appeared then you can specify that version instead if you wish Do not make any other change in these notices Once this change is made in a given copy it is irreversible for that copy so the ordinary GNU General Public License applies to all subsequent copies and derivative works made from that copy This option is useful when you wish to copy part of the code of the Library into a program that is not a library 4 You may copy and distribute the Library or a portion or derivative of it under Section 2 in object code or executable form under the terms of Sections 1 and 2 above provided that you accompany it with the complete corresponding machine readable source code which must be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange If distribution of object code is made by offering access to copy from a designated place then offering equivalent access to copy the source code from the same place satisfies the requirement to distribute the source code even though third parties are not compelled to copy the source along with the object code 5 A program that contains no derivative of any portion of the Library but is designed to work with the Libr
133. tection laws e Ifa 4 3 picture is projected in wide screen distortion may occur around the edges so that part of the picture may no longer be visible We recommend viewing in 4 3 mode so you can enjoy the picture as it was intended to be seen 40 For assistance please call 1 888 VIEW PTV 843 9788 or contact us via the web at http www panasonic com contactinfo Mode sid Picture Explanation Notes e The screen size changes if ID1 is detected P 77 e When ASPECT is in ZOOM mode PIP feature cannot be used PP 44 45 ASPECT Controls 4 3 will display a 4 3 picture at its standard 4 3 size JUST mode will display a 4 3 picture at maximum size but with aspect correction applied to the center of the screen so that elongation is only apparent at the left and right edges of the screen The size of the picture will depend on the original signal ZOOM mode magnifies the central section of the picture FULL will display the picture at its maximum size but with sight elongation You can reduce the image and adjust it to the Original image quality Except XGA uolj e19do dIiseg 41 42 Mute Freeze SAP Sound mute O E TVVIDEO Ss A ANTENNA B Note Useful when answering the phone or receiving unexpected visitors Press this button to mute the sound Press again to reactivate sound Sound is also reactivated when power is turned off or volume level is changed The audio output from AV OUT i
134. the work is a derivative of the Library you may distribute the object code for the work under the terms of Section 6 Any executables containing that work also fall under Section 6 whether or not they are linked directly with the Library itself 6 As an exception to the Sections above you may also combine or link a work that uses the Library with the Library to produce a work containing portions of the Library and distribute that work under terms of your choice provided that the terms permit modification of the work for the customer s own use and reverse engineering for debugging such modifications You must give prominent notice with each copy of the work that the Library is used in it and that the Library and its use are covered by this License You must supply a copy of this License If the work during execution displays copyright notices you must include the copyright notice for the Library among them as well as a reference directing the user to the copy of this License Also you must do one of these things a Accompany the work with the complete corresponding machine readable source code for the Library including whatever changes were used in the work which must be distributed under Sections and 2 above and if the work is an executable linked with the Library with the complete machine readable work that uses the Library as object code and or source code so that the user can modify the Library and then relink to
135. utput of your Device Display to a Dolby Digital decoder Dolby Digital 5 1 channel surround sound delivers digital quality sound Dolby Digital provides five discrete full bandwidth channels for front left front right center surround left and surround right plus a LFE Low Frequency Effect subwoofer channel For a full Home Theater sound experience an external Dolby Digital decoder and a multichannel amplifier must be connected to the Digital Audio Out jack on the unit G D pap U Q u m n D Q Procedure Connect the Digital Audio cable from the Digital Audio Out jack on the unit to the Digital Audio In connection on the Dolby Digital decoder Note When ATSC channel is selected the output from the Digital Audio Out jack will be Dolby Digital But if NTSC channel is selected the output will be PCM Manufactured under license from Dolby Laboratories Dolby DO and the double D symbol are AL pieh trademarks of Dolby Laboratories Firmly connect the cable to the connector N W Q OPTICAL Amplifier with built in Dolby Digital decoders Connect three or more speakers for surround sound 21 Installation How to connect the RGB IN Terminals Connecting a PC to RGB IN COMPUTER AUDIO IN RGB1 IN o0o0000 Connect a cable which matches t
136. ver 24 hours the number of times lit the length of time between lightings etc may shorten lamp life Because of this we recommend having a replacement lamp on hand Trademarks e VGA and XGA are trademarks of International Business Machines Corporation e Macintosh is a registered trademark of Apple Computer USA e VESA and SVGA are trademarks of the Video Electronics Standard Association Even if no special notation has been made of company or product trademarks these trademarks have been fully respected e Equipped with dbx TV Noise Reduction for true MTS reproduction dbx TV Noise Reduction is required for good stereo separation and audio fidelity dbx is a registered trademark and is licensed by dbx Technology Licensing SS P SD Logo is a trademark E Manufactured under license from BBE Sound Inc BoE Licensed by BBE Sound Inc under USP4638258 and 4482866 High Definition Sound BBE and BBE symbol are registered trademarks of BBE Sound Inc kiar HDMI the HDMI logo and High Definition Multimedia Interface HIGH DEFINITION MULTIMEDIA INTERFACE are trademarks or registered trademarks of HDMI Licensing LLC This product incorporates copyright protection technology that is protected by U S patents and other intellectual property rights Use of this copyright protection technology must be authorized by Macrovision Corporation and is intended for home and other limited viewing uses only unless otherwise authorized by

Panasonic PT-60LCX64 Television

Contents

Download Pdf Manuals

Related Search

Related Contents