Panasonic CQ-C3400U CD Player
Contents
1. Note e The level meter makes the same move in the right and left sides in accordance with music CQ 3400 3300 3200 3100U 23 24 z aa A Panasonic cc OO omy J z SOURCE D M Direct Memory st Stereo indicator DISC FOLDER eT Wwe arin DISP Preset buttons 1 to 6 lt gt TUNE EN K uve pooner lt AUNE gt r AE Bee e A RANDOM SCAN REPEAT P Display BAND APM Auto Preset Memory Preset station Radio Mode Press SOURCE to select the radio mode Band Frequency Band Press BAND a is a Tuning gt Higher frequency lt Lower frequency Press and hold lt or gt for more than 0 5 seconds then release Seeking will start CQ 3400 3300 3200 3100U Display Change Press DISP display Radio mode display default Clock display SOURCE 1 to 6 Preset station lt gt Tuning BAND DISP Auto preset Display memory Direct Memory D M mu oco This is a useful function that can call broadcast stations directly during playback in other modes CD CD Changer etc even when the power is off Your favorite radio station can be memorized in D M direct memory Default FM 87 9 MHz E Memorize Select a band and frequency Press and hold D M for more than 2 seconds e Frequency is saved in the memory2. CD TEXT is only for r CQ C3400U C0 C33000 o etii CO C3300U Caution e 3 8 cm CD is not available for this unit so do not insert it e Do not use irregularly shaped discs e Do not use discs that have a seal or label attached e Be sure to close the front panel while CD playback e To avoid damaging the front panel do not push it down or place objects on it while it is open e Do not pinch your finger or hand in the front panel e Do not insert foreign object into the disc slot w yN Note e The power will be turned on automatically when a disc is loaded e A disc which has both CD DA data and MP3 WMA data on it may not be reproduced normally For example it may be reproduced without sound e Refer to the section on Notes on MP3 WMA page 30 and Notes on Discs page 44 CQ 3400 3300 3200 3100U Disc Insert Press OPEN Insert a disc E 4 Eject Label side Note e Do not insert a disc when indicator lights because a disc is already loaded Disc indicator e t may take some time to start playing Close the front panel manually Playback will start automatically after recognizing the data of the loading disc m CD DA E MP3 WMA Only for CQ C3400U CQ C3300U When CD is in the Player Press SOURCE to select the CD MP3 WMA player mode and playback starts E CD DA E MP3 WMA Track Play time Folder File Disc
3. Install the battery on the battery holder Insert the battery holder back into its original position Battery Notes e Battery type Panasonic lithium battery CR2025 included e Battery life Approximately 6 months under normal use at room temperature Caution Improper use of the battery may cause overheating an explosion or ignition resulting in injury or a fire e Remove and dispose of an old battery immediately e Do not disassemble or short the battery Do not throw a battery into a fire e Keep the battery away from children to avoid the risk of accidents e Follow local regulations when disposing of the battery CQ C3400 3300 3200 3100U 10 HEETE CO C3200U Preparation Connect the subwoofer option page 56 Subwoofer level setting e You can change the subwoofer level page 34 Subwoofer low pass filter setting e You can select the upper limit frequency of the sound from subwoofer page 34 Clock Setting The 12 hour system is used for the clock e Turn your car s ignition key to the ACC or ON position e Press SOURCE PWR e When the power is switched on for the first time a demonstration appears on the display Press DISP display to change to regular mode Press DISP display Clock display Press and hold DISP display again for more than 2 seconds Hours blink Hours Note e ADJUST is di
4. External amplifier control power lead max 500 mA lt q This lead is for connection to the power amplifier Blue white stripe Note e This lead is used for power control when an external power amplifier is connected The power supply of a power amplifier will be activated when turning on the Pre amp output connector rear Pre amp output connector front L white OR red Fuse mini auto fuse type 15 A e f the fuse rear panel blows frequently they may be something wrong with the unit or wiring connection Consult your nearest Panasonic Servicenter for service Power connector White power of this unit Front speaker lead White black stripe Left Dual CD changer control lead lt q TONS O N To front Brown white stripe speaker Note Gray Righi e Insulate this lead with vinyl tape when you do not a connect it Gray black stripe Antenna control lead lt _ ______ Green to motor antenna max 500 mA Blue Left This lead is not intended for use with switch actuated Rear speaker lead Green black stripe power antenna N To rear speaker Note Violet Right e The power antenna extends automatically when the AM FM radio mode is selected Violet black stripe ACC power lead lt 4 ACC Red Caution To ACC power 12 V DC e Do not connect more than Ba
5. No operation by some cause No disc is in the changer magazine The dual CD changer selector is connected and the connections are now being checked The dual CD changer selector is connected but the changers are not connected The changer has become disconnected from this unit in the changer mode Note Possible solution Disc is dirty or is upside down A disc other than a music CD CD DA type is loaded Check the disc The changer automatically switches to the next disc Check the disc The changer automatically switches to the next disc If normal operation is not restored call the store where you purchased the unit or the nearest Servicenter to ask for repairs The display continues if you cannot switch off the power Insert discs into the changer magazine The connections are now being checked so please wait a few moments Verify that correct connections have been made e Messages in the action and display sections of the error chart vary with changers Refer to the operating instructions of the CD changer for details 42 CQ C3400 3300 3200 3100U Maintenance Your product is designed and manufactured to ensure a minimum of maintenance Use a dry and soft cloth for routine exterior cleaning Never use benzine thinner or other solvents Product Servicing If the suggestions in the charts do not solve the problem we recommend that you take it to your nearest a
6. 200 Q Dimensions WxHxD 7 X1 16 x 61 3 17850155 mm Weight 3 Ibs 1 oz 1 4 kg Above specifications comply with EIA standards Note FM Stereo Radio Frequency range Usable sensitivity 87 9 MHz 107 9 MHz 10 2 dBf 0 9 uV 75 Q 50 dB quieting sensitivity 15 2 dBf 1 6 uV 75 Q Frequency response 30 Hz 15 kHz 3 dB Alternate channel selectivity 75 dB Stereo separation Image response ratio IF response ratio Signal to noise ratio AM Radio Frequency range Usable sensitivity CD Player Sampling frequency DA converter Pick up type Light source Wave length Frequency response Signal to noise ratio Total harmonic distortion Wow and flutter Channel separation 35 dB 1 kHz 75 dB 100 dB 62 dB 530 kHz 1 710 kHz 27 dB uV 11 V S N 20 dB 8 times oversampling 4 DAC system Astigma 3 beam Semiconductor laser 780 nm 20 Hz 20 kHz 1 dB 96 dB 0 01 1 kHz Below measurable limits 75 dB e Specifications and design are subject to modification without notice due to improvements CQ 3400 3300 3200 3100U 57 Panasonic Consumer Electronics Company Division of Matsushita Electric Corporation of America One Panasonic Way Secaucus New Jersey 07094 http Awww panasonic com Panasonic Sales Company Division of Matsushita Electric of Puerto Rico Inc PSC Ave 65 de Infanteria Km 9 5 San Gabriel Industrial Par
7. Select a Mute Attenuation VOLUME Decrease 10 steps You can select mute or attenuation when MUTE Attenuation is pressed page 23 VOLUME v No sound Default MUTE Mute CQ 3400 3300 3200 3100U VOLUME V Left enhanced 4 Front enhanced e The volume can also be adjusted directly using VOLUME on the main unit page 23 35 CQ C3400 3300 3200 3100U Security Setting lt esta gut DISC FOLDER SCROLL RANDOM Security Function Allows you to activate the anti theft function when leaving your car Default ON 36 CQ C3400 3300 3200 3100U Press and hold VOLUME SEL select for more than 2 seconds 1 Press and hold 2 Sec Tun ivoLume Press A or V on the remote control unit A Security function is activated V Security function is not activated SEL Select A V DISP Display Note e Press DISP display to return to the regular mode e f no operation takes place for more than 7 seconds in security setting the display returns to the regular mode Security Function When the key in the ignition is turned OFF e Security message will be displayed e The panel removal alarm will be active page 45 When the front panel is removed e The security indicator blinks page 45 37 CQ 3400 3300 3200
8. anti theft systems specific procedures may be required for connection and disconnection of the battery to install this product e Before attempting installation of this electronic component contact your car dealer or manufacturer to determine the required procedure and strictly follow their instructions e FAILURE TO FOLLOW THE PROCEDURE MAY RESULT IN THE UNINTENDED DEPLOYMENT OF AIR BAGS OR ACTIVATION OF THE ANTI THEFT SYSTEM RESULTING IN DAMAGE TO THE VEHICLE AND PERSONAL INJURY a Note e Various settings that have been stored in the memory in order on board equipment car navigation etc may be lost if the battery terminals are disconnected Therefore we recommend to make a record of or to back up the settings before disconnecting the terminals After completing installation of the main unit set the equipment again according to the record XX Dashboard Installation Installation Opening Jee 53 mm ENET 7 30 182 mm This unit can be installed in any dashboard having an opening as shown above The dashboard should be 9 16 4 75 mm 30 5 56 mm thick in order to be able to support the unit CQ 3400 3300 3200 3100U 48 Installation Guide continued Identify All Leads The first step in installation is to identify all the car wires you ll use when hooking up your sound system As you identify each wire we suggest that you label it using masking tape an
9. Eject Press OPEN Press 4 eject and take the disc Close the front panel manually CD Player Do not watch the scroll display while driving RAND EEA indicator Panasonic cocuwou mosreT SOWKY Cp ai OPEN a a SVE 4 wa T Tin Ea t OE pio ee ieee a ne KE DP lt gt Track fast forward fast reverse o IvV rozm aA S 7 DISP lt Sune E a za A ar SOURCE 3 SCROLL 4 RANDOM 5 SCAN 6 REPEAT Nae Display Change Random Play Em Press DISP display All available tracks are played in a random sequence c0 C32000 Press 4 RANDOM agin to cancel CQ C3300U F Scan Play sequence Clock display t mT it i Press 5 SCAN Repeat Play EEA The current track is repeated Clock display Note Press 6 REPEAT Sj lights Press 6 REPEAT again to cancel e NO TITLE is displayed when there is no information on the disc The first 10 seconds of each tracks is played in Press 5 SCAN again to Er D e Press 3 SCROLL to have an another circle a Direct Track Selection scroll while a title is displayed fmm Example track number 10 z Press 4 i Track Selection pate 1 0 gt gt Next track Press BAND SET lt 4 Beginning of the current track Note For the previous track press twice display or Fast Forward Fast Reverse Press and hold gt gt gt gt Fast forward
10. Note e New stations overwrite existing saved stations after following this procedure E Recalling the Direct Memory Press D M Press D M again to cancel Station Preset Up to 6 stations can be stored in each of the FM1 FM2 FM3 and AM band selections Caution e To ensure safety never attempt to preset stations while you are driving Auto Preset Memory APM Automatically save stations with good reception in the preset memory Select a band previous page Press and hold BAND APM Auto Preset Memory for more than 2 seconds e The 6 stations with good reception will be automatically saved in the memory under preset number 1 to 6 Once set the preset stations are sequentially scanned for 5 seconds each scanning gt ZA i H ys Manual Preset Memory Manually save a station in the preset memory Select a band and frequency previous page Press and hold one of the buttons from 1 to 6 until the display blinks once gt Preset number Note e To stop scanning press one of the buttons from 1 to 6 e New stations overwrite existing saved stations after this procedure Preset Station Calling Select a band previous page Press one of the preset buttons from 1 to 6 CQ C3400 3300 3200 3100U 25 Before Disc Playback CQ C3200U CQ C3100U cannot play MP3 WMA files Available Discs m CD DA 26
11. When Making MP3 WMA Files on the previous page Compression method Bit rate VBR Sampling frequency MPEG 1 audio layer 3 MP3 32 kbps 320 kbps Yes 32 44 1 48 kHz MPEG 2 audio layer 3 MP3 8 kbps 160 kbps Yes 16 22 05 24 kHz Windows Media Audio Ver 2 Ver 8 Ver 9 164 kbps 192 kbps No 32 44 1 48 kHz WMApro Loss less Not available 64 kbps at 48 kHz Not available Copyright It is prohibited by copyright laws to copy distribute and deliver copyrighted materials such as music without the approval of copyright holder except enjoying yourself personally No warranty Above description complies with our investigations as of December 2003 It has no warranty for reproducibility and displayability of MP3 WMA CQ C3400 3300 3200 3100U 31 CD Changer Control O or B indicator RAND EEA indicator DISC FOLDER A SCROLL SOURCE Disc selection CD changer functions are designed for optional Panasonic CD changer unit e Connect the CD changer and load a magazine CDs Note e The power will be turned on automatically when a magazine is loaded e This unit does not support the following through the CD changer CD RW playback except when CX DP880U is connected CD text display MP3 WMA playback e Pausing does not function in the changer mode CD Changer Mode Press SOURCE to select the CD changer
12. but not more than 30 Note e The preset memory is cleared to return to the original factory setting when the power connector or battery is disconnected Find the model number and serial number on either the back or bottom of the unit Please record them in the space below and retain this booklet as a permanent record of your purchase to help with identification in case of theft MODEL NUMBER CQ C3400U CQ C3300U CQ C3200U CO C3100U SERIAL NUMBER DATE PURCHASED FROM CQ C3400 3300 3200 3100U Panasonic welcomes you to our ever growing family of electronic product owners We know that this product will bring you many hours of enjoyment Our reputation is built on precise electronic and mechanical engineering manufactured with carefully selected components and assembled by people who take pride in their work Once you discover the quality reliability and value we have built into this product you too will be proud to be a member of our family CQ C3400 C3300U Removable Full Front MP3 WMA CD Player Receiver with CD Changer Control CQ C3200 C3100U Removable Full Front CD Player Receiver with CD Changer Control Note e Please refer to page 9 for information on differences in each model Accessories Diagram Diagram Screw kit YEPOFZ3315 e Hex Nut 5 mmo Remote Control Unit YEFX9992663 e Tapping Screw 5 mm x lt 16 mm e Mounting Bolt e Operating Instructions Y
13. lt 4 lt 44 Fast reverse Release to resume the playback 4 is pressed SOURCE 0 to 9 Track number 4 Random play 5 Scan play 6 Repeat play lt gt gt Track BAND Pause Set Pause Press E 1 gt Press E 1 again to cancel CQ 3400 3300 3200 3100U e To suspend direct selection press DISP e Random scan and repeat play are canceled once Number DISP Display 27 MP3 WMA Player c0 C3300U Do not watch the scroll display while driving SOURCE Folder selection Display Change Press DISP display Play time Folder name Album File name Title and artist Clock display Example MP3 Note e NO NAME is displayed when there is no information on the disc e Press 3 SCROLL to have an another circle scroll while a title is displayed oJmmmfa x Refer to ID3 WMA Tag Setting Folder Selection A Next folder V Previous folder File Selection gt A Next file lt 4 Beginning of the current file For the previous file press twice CQ 3400 3300 3200 3100U 28 Panasonic coc3 00 v DISC FOLDER A A V FOLDER 3 SCROLL 4 RANDOM 5 SCAN 6 REPEAT RAND KE gt gt lt gt aa indicator File fast forward fast reverse MOSFET SOWxY OPEN RANDREP ne eA av fie TRACK l PEP Of RANDOM SC
14. system e You may encounter trouble in playing MP3 WMA files or displaying the information of MP3 WMA files recorded with certain writing software or CD recorders e The file extension mp3 or wma should be assigned to each file depending on the file format e This unit does not have the play list function e Although Multi session recording is supported the use of Disc at Once is recommended Supported file systems ISO 9660 Level 1 Level 2 Apple Extension to ISO 9660 Joliet Romeo Note e Apple HFS UDF 1 50 Mix CD CD Extra are not Supported Compression formats Folder Selection Order File Playback Order Maximum number of files folders e Maximum number of files 999 e Maximum number of files in one folder 255 e Maximum depth of trees 8 e Maximum number of folders 255 Root folder is included Note e This unit counts the number of folders irrespective of the presence or absence of MP3 WMA file e f the selected folder does not contain any MP3 WMA files the nearest MP3 WMA files in the order of playback will be played e Playback order may be different from other MP3 WMA players even if the same disc is used e ROOT appears when displaying the root folder name Root folder root directory Folder selection In the order AJ to 6 File selection In the order YJ 1095 Tree1 Tree2 Tree3 Tree 8 Max Recommendation Points to Remember
15. 3100U 38 Preliminary Steps Check and take steps as described in the tables below If You Suspect Something Wrong Immediately switch the power off Disconnect the power connector and check that there is neither smoke nor heat from the unit before asking for repairs Never try to repair the unit by yourself because it is dangerous to do so Troubleshooting Caution e Do not use the unit if it malfunctions or if there is something wrong e Do not use the unit in abnormal condition for example without sound or with smoke or foul smell which can cause ignition or electric shock Immediately stop using it and call the store where you purchased it Troubleshooting Tips u Common No power to the unit Sound is not generated The demonstration screen displayed and no operable Some operations are not executable CQ 3400 3300 3200 3100U Possible solution The power cord battery ACC and ground is connected in the wrong way Fuse blow out Eliminate the cause of fuse blow out and replace the fuse with new one Consult your dealer MUTE is set to ON Set MUTE to OFF The wiring of the speaker lines Check the wiring in accordance with are not correct or a break or poor the wiring diagram contact arises You cannot operate the unit while Press DISP display to end the the demonstration screen appears demonstration screen If the demonstration screen appears Check
16. 8 kbps and a sampling frequency of 44 1 kHz Note e MP3 WMA encoding and writing software is not supplied with this unit e CD writing software is not supplied with this unit Points to Remember When Making MP3 WMA Files Common e High bit rate and high sampling frequency are recommended for high quality sounds e Selecting VBR Variable Bit Rate is not recommended because playing time is not displayed properly and sound may be skipped e The playback sound quality differs depending on the encoding circumstances For details refer to the user manual of your own encoding software and writing software MP3 e t is recommended to set the bit rate to 128 kbps or more and fixed WMA e t is recommended to set the bit rate to 64 kbps or more and fixed e Do not set the copy protect attribute on the WMA file to enable this unit to playback Caution e Never assign the mp3 or wma file name extension to a file that is not in the MP3 WMA format This may not only produce noise from the speaker damage but also damage your hearing CQ 3400 3300 3200 3100U REZU CO C3300U Display Information E Displayed Items CD TEXT MP3 ID3 tag e Disc title e Album title Track title e Title and artist MP3 WMA WMA WMA tag e Folder name Album title e File name e Title and artist Displayable Characters e Displayable length of file name folder name wi
17. AN REPEAT DISP Display Fast Forward Fast Reverse Press and hold gt gt gt gt Fast forward lt 4 A4 Fast reverse Release to resume the playback Pause Press E 8 gt Press 8 8 again to cancel ID3 WMA Tag Setting Oco Press and hold 3 for more than 2 seconds default When a folder name is displayed TAG ON The album title is displayed TAG OFF The folder name is displayed When a file name is displayed TAG ON The title artist name is displayed TAG OFF The file name is displayed CQ 3200U CQ C3100U cannot play MP3 WMA files SOURCE 0 to 9 File folder number 4 Random play 5 Scan play 6 Repeat play lt lt gt gt File A V Folder BAND Pause Set Number DISP Display Random Play E All the available files are played in a random sequence Press 4 RANDOM ENPA lights Press 4 RANDOM again to cancel Folder Random Play ENA All the files on the current folder are played in a random sequence Press and hold 4 RANDOM for more than 2 seconds EUPA blinks Press and hold 4 RANDOM again for more than 2 seconds to cancel Scan Play The first 10 seconds of each files is played in sequence Press 5 SCAN 7 i N Press 5 SCAN again to cancel Folder Scan Play From the next folder the first 10 seconds of the first file on each folder is played in sequ
18. EFM284143 e Lock Cancel Plate e Warranty Card etc Rear Support Strap YEFG04024 Mounting Collar Removable Face Plate YEFX0216165 Case YEFA131839 Power Connector YEAJ02871 Trim Plate YEFC05615 Note e The number in parenthesis underneath each accessory part name is the part number for maintenance and service e Accessories and their parts numbers are subject to modification without prior notice due to improvements e Mounting collar and trim plate are mounted on the main unit at shipment page 46 CQ C3400 3300 3200 3100U Features MP3 WMA Playback from CD R RW You can play your MP3 WMA Windows Media Audio files as well as regular CDs With up to 10 to 12 times the capacity of a conventional CD a single MP3 WMA encoded disc can keep you entertained throughout your entire journey Depending on bit rate System Upgrade CO C3400U CO C3300U CO C3200U CO C3100U Dual CD changer selector CA CD55U option CQ 3400 3300 3200 3100U CD Changer Control You can connect the optional CD changer unit For details refer to the operating instructions on the CD changer unit e 2 CD changers option can be controlled with this unit To connect 2 CD changers to it the dual CD changer selector CA CD55U option is necessary Large sized Volume Control An large sized rotary volume control that looks like one belonging to a Hi Fi audio system is featured Sub
19. Panasonic Removable Full Front MP3 WMA CD Player Receiver with CD Changer Control CQ C3400 C3300U Removable Full Front CD Player Receiver with CD Changer Control CQ C3200 C3100U lt 8 CQ C3400U Operating Instructions Manuelldiinstructions WEWE ORAMA OES COMPACT MISE mpa WM A TEXT e Please read these instructions carefully before using this product and save this manual for future use e Pri re de lire ces instructions attentivement avant d utiliser le produit et garder ce manuel pour l utilisation ult rieure e Lea con atenci n estas instrucciones antes de utilizar el producto y guarde este manual para poderlo consultar en el futuro E N G L l S H Safety Information WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK AND ANNOYING INTERFERENCE USE ONLY THE INCLUDED COMPONENTS CAUTION THIS PRODUCT IS A CLASS I LASER PRODUCT USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF REFER SERVICING TO QUALIFIED PERSONNEL The following applies only in the U S A Part 15 of the FCC Rules FCC Warning Any unauthorized changes or modifications to this equipment would void the user s authority to operate this devi
20. Press tvotume turn ivoLume lg a SEL select Press VOL A or VOL VJ Dee on the remote control unit Select VOL A VOL V 34 a DISC FOLDER A SCROLL RANDOM SCAN VO LUME A VOLUME Vv S Volume VOLUME Up Default 18 Setting range 0 to 40 VOLUME V Down DISP J Display a VOLUME Increased Bass Treble VOLUME V Decreased You can adjust the bass and treble sound J Note Default ie aac VOLUME AJ Increased gt e He ania display to return to the reble regular mode Setting range 12 dB to 12 dB by 2 dB VOLUME v Decreased e f no operation takes place for more than Y 7 seconds in audio setting 2 seconds in VOLUME AI Right enh d gt the volume setting the display returns to Balance Fader J Right enhance the regular mode You can adjust the sound balance among the front rear right and left speakers Default BAL balance CNT center VOLUME FAD fader CNT center VOLUME V Rear enhanced Setting range 15 levels each J s HEZO CO C3200U VOLUME Increased VOLUME v Decreased Subwoofer Level You can change the subwoofer volume level Default 0 dB Setting range MUTE subwoofer mute 6 dB to 6 dB by 2 dB J Select S CQ C3400U VOLUME 120 Hz VOLUME vV 80 Hz Subwoofer Low Pass Filter LPF You can select the upper limit frequency of the sound from subwoofer Default 80 Hz Setting range 120 Hz 80 Hz A
21. ce NOTICE This product has a fluorescent lamp that contains a small amount of mercury It also contains lead in some components Disposal of these materials may be regulated in your community due to environmental considerations For disposal or recycling information please contact your local authorities or the Electronics Industries Alliance lt http www eiae org gt When Driving Keep the volume level low enough to be aware of road and traffic conditions When Washing Your Car Do not expose the product including the speakers and CDs to water or excessive moisture This could cause electrical shorts fire or other damage When Parked Parking in direct sunlight can produce very high temperatures inside your car Give the interior a chance to cool down before switching the unit on Use the Proper Power Supply This product is designed to operate with a 12 V DC negative ground battery system the normal system in a North American car Disc Mechanism Do not insert coins or any small objects Keep screwdrivers and other metallic objects away from the disc mechanism and disc Use Authorized Servicenters This product is made of precision parts Do not attempt to disassemble or adjust any parts Please refer to the Servicenter list including with this product for service assistance For Installation This product should be installed in a horizontal position with the front end up at a convenient angle
22. ct file selection direct folder selection notes on MP3 WMA T CD Changer Control sicicio ccc cesscctcsn ties cccnceeseredsacationedseces 32 S39 CD changer mode display change disc selection track selection fast CTS forward fast reverse random play disc random play scan play disc scan play repeat play disc repeat play CD changer selection direct disc selection 20 21 CQ 3400 3300 3200 3100U CQ C3400 3300 3200 3100U General SOURCE PWR Power sensor Point the remote control unit S HDB at the remote control signal Level meter display pattern LEVEL a O cacau S M DISC FOLDER 1 2 VOLUME MUTE Mute attenuation Power Turn your car s ignition key to the ACC or ON position ey ON Press SOURCE PWR OFF Press SOURCE PWR again and hold for more than 1 second Note e After turning off the ignition key a security message is displayed and the panel removable alarm that reminds you to take the panel is activated When security function is set to on page 36 lll m mosFeT 5OWKY OPEN lt LeveL a 6 lt i gt i HH Keer E SCROLL RANDOM SCAN REPEAT p 3 4 5 6 G PBAND gt PM s Hpe J indicator DISP Display Source Press SOURCE to change the source WETANE CO C3300U Radio page 24 cD player page 27 When a CD is in the player or MP3 WMA player page 28 a W
23. d a permanent marker This will help avoid confusion when making connections later Note e Do not connect the power connector to the stereo unit until you have made all connections If there are no plastic caps on the stereo hooking wires insulate all exposed leads with electrical tape until you are ready to use them Identify the leads in the following order Power Lead If your car has a radio or is pre wired for one Cut the connector wires one at a time from the plug leaving the leads as long as possible so that you can work with individual leads Turn the ignition on to the accessory position and ground one lead of the test bulb to the chassis Touch the other lead of the test bulb to each of the exposed wires from the cut radio connector plug Touch one wire at a time until you find the outlet that causes the test bulb to light Now turn the ignition off and then on If the bulb also turns off and on that outlet is the car power lead If your car is not wired for an audio unit Go to the fuse block and find the fuse port for radio RADIO accessory ACC or ignition IGN CQ 3400 3300 3200 3100U Battery Lead If your stereo unit has a yellow lead you will need to locate the car s battery lead Otherwise you may ignore this procedure The yellow battery lead provides continuous power to maintain a clock memory storage or other function If your car has a radio or is pre wired for one Wi
24. disc Sound skipping due to The unit is not sufficiently secured Secure the unit to the console box with the rear support strap etc vibration If normal operation is not restored The unit is tilted at over 30 in the Make the angle 30 or less call the store where you purchased the front to end direction m unit or the nearest Servicenter to ask i l for repairs Disc unejectable A label is peeled off from the CD in Refer repair to the dealer where you the unit purchased the unit The player cannot read the file you Select a file that the player can read The microcontroller in the unit Unplug the power cord and plug it are tiying to play A Confirm hal type ol data recorted operates abnormally due to noise again In case the unit is still out of rile recorden inan Unsupported ANAE dise CRATE a MEW NSG 1 or other factors order consult the dealer file system compression scheme necessary data format file name extension Note damaged data etc e Refer to the section on Notes on MP3 WMA page 30 An attempt has been made to play Play WMA files which are not a copy protected WMA file copy protected gt No disc in the player Insert a disc into the player x If all the files cannot be played E4 or E5 remains on the display CQ C3400 3300 3200 3100U 40 41 CQ 3400 3300 3200 3100U Tro U b esh ooti ng continued Q CD Changer Control Disc has scratches
25. ed Refer to the description about data MP3 WMA for playable sound data pressing buttons wrong direction A wrong battery is direction inserted The battery is weak Replace the battery with new one The aiming direction of the remote Aim the remote control unit at the control unit is wrong sensor of the unit and press buttons except CD DA i e music CD The unit plays back the ROM track Skip the ROM track of a mix mode CD The sensor is exposed to direct Block off sunlight to the sensor sunlight The remote control unit may not be operable when the sensor is exposed to direct sunlight In such a case the system is not faulty The CD R RWs that The playability of some CD R RWs Make CD R RWs in different Y are playable on may depend on the combination combination of media recording other devices are not of media recording software software and recorder after referring to Error Display M playable on this unit and recorder to be used even if the description about MP3 WMA SRAVMESSAUES these CD R RWs are playable on UO CD MP3 WMA RHREZUINTE CO C3300U other devices such as a personal acD C0 C3200U CO C3100U computer Possible solution Sound skipping or There is a flaw or foreign objects on Remove the foreign objects or use a noise the disc flawless disc For MP3 WMA refer to Disc is dirty or is upside down Check the disc the description about MP3 WMA Disc has scratches Check the
26. ence Z i ne i Press and hold 5 SCAN again for more than 2 seconds to cancel Press and hold 5 SCAN for more than 2 seconds Repeat Play EEA The current file is repeated Press 6 REPEAT H3 lights Press 6 REPEAT again to cancel Folder Repeat Play mia The current folder is repeated Press and hold 6 REPEAT for more than 2 seconds MAA blinks Press and hold 6 REPEAT again for more than 2 seconds to cancel E Direct File Selection E Example file number 10 Press 4 Press 1 0 Press BAND SET E Direct Folder Selection E Example folder number 10 Press twice Press 1 0 Press BAND SET Note e To suspend direct selection press DISP display e Random scan and repeat play are canceled once is pressed e Operation returns to the start of the disc when a folder with no MP3 or WMA format files is selected 29 CQ 3400 3300 3200 3100U 30 MP3 W MA Player continued What is MP3 WMA MP3 MPEG audio layer 3 and WMA Windows Media Audio are the compression formats of digital audio The former is developed by MPEG Motion Picture Experts Group and the latter is developed by Microsoft Corporation Using these compression formats you can record the contents of about 10 music CDs ona single CD media This figures refer to data recorded on a 650 MB CD R or CD RW at a fixed bit rate of 12
27. f you plan to install this product yourself your first step is to decide where to install it The instructions in these pages will guide you through the remaining steps Please refer to the WARNING statement e Identify and label the car wires e Connect the car wires to the wires of the power connector e Install the unit in the dashboard e Check the operation of the unit If you encounter problems please consult your nearest professional installer Before you begin installation look for the items which are packed with your unit e Warranty Card Fill this out promptly e Panasonic Servicenter List for Service Directory Keep for future reference in case the product needs servicing e Installation Hardware Needed for in dash installation Dashboard Specifications Thickness Min 3 6 4 75 mm Max 7 32 5 56 mm I 23 3 53 mm 75 32 182 mm Preparation e We strongly recommend that you wear gloves for installation work to protect yourself from injuries e When bending the mounting tabs of the mounting collar with a screwdriver be careful not to injure your hands and fingers e Disconnect the cable from the negative battery terminal See caution below e Unit should be installed in a horizontal position with the front end up at a convenient angle but not more than 30 1 Sule Less than 30 g N Caution e f your car is equipped with air bag and or
28. g characteristics or dirt fingerprints scratches etc on the disc surface e CD R RW discs are less resistant to high temperatures and high humidity than ordinary music CDs Leaving them inside a car for extended periods may damage them and make playback impossible e Some CD R RWs cannot be played back successfully thanks to incompatibility among writing software a CD recorder CD R RW drive and the discs e This player cannot play the CD R RW discs if the session is not closed e This player cannot play the CD R RW discs which contains other than CD DA or MP3 WMA data CEZ co c3300u e Be sure to observe the instructions of CD R RW disc for handling it Anti Theft System This unit is equipped with a removable face plate Removing this face plate makes the unit totally inoperable E Caution e This face plate is not waterproof Do not expose e Do not touch the contacts on the face plate or it to water or excessive moisture on the main unit since this may result in poor e Do not remove the face plate while driving your electrical contacts Car e f dirt or other foreign substances get on the e Do not place the face plate on the dashboard contacts wipe them off with a clean and dry or nearby areas where the temperature rises to cloth high level e To avoid damaging the face plate do not push it down or place objects on it while it is open d Remove the Removable Face Plate Switch off the power
29. hen a MP3 WMA data disc is in the player CD changer control page 32 When an optional CD changer a gt Demonstration is connected When the power is switched on for the first time a demonstration appears on the display Press DISP display to change to regular mode lt Scrolling Note e To display the demonstration again press and hold SOURCE for more than 4 seconds when turning power on omma J 22 CQ 3400 3300 3200 3100U SOURCE Power source MUTE Volume DISP Display co c3200U ETT Radio page 24 CD player page 27 When a CD is in the player CD changer control page 32 When an optional CD changer is connected Volume r a VOL AJ Up VOL V Down Up Down Setting range 0 to 40 default 18 Note e The volume level can be set independently for each source For radio one volume setting for AM one volume setting for all FMs Mute Attenuation ON Press MUTE 2c lights OFF Press MUTE again You can select mute or attenuation page 34 omuUTeE he sounds default aS Decrease the volume by 10 steps S HDB E gt Super High Definition Bass oco With music genres like rock music the bass sound will be more powerful Press S HDB Moderately emphasized E lights Strongly emphasized E lights Level Meter Display Pattern Oco Press LEVEL default
30. ights Press 4 RANDOM again to cancel Disc Random Play EA All the available tracks on the current disc are played in a random sequence Press and hold 4 RANDOM for more than 2 seconds ERPI blinks Press and hold 4 RANDOM again for more than 2 seconds to cancel Scan Play The first 10 seconds of each tracks is played in sequence Press 5 SCAN Press 5 SCAN again to cancel Disc Scan Play From the next disc the first 10 seconds of the first track of all the discs is played in sequence Press and hold 5 SCAN for more than 2 seconds Press and hold 5 SCAN again for more than 2 seconds to cancel Repeat Play EEA The current track is repeated Press 6 REPEAT Hi2lights Press 6 REPEAT again to cancel Disc Repeat Play EHA The current disc is repeated Press and hold 6 REPEAT for more than 2 seconds EEA blinks Press and hold 6 REPEAT again for more than 2 seconds to cancel CD Changer Selection Preparation Use the dual CD changer selector CA CD55U option to connect 2 CD changers page 54 Press BAND A Direct Disc Selection p Example disc number 5 Press 4 Press 5 Press BAND SET Note e To suspend direct disc selection press DISP display or e Random scan and repeat play are canceled once is pressed CQ C3400 3300 3200 3100U 33 Audio Settings aa i
31. ires The wiring diagram page 52 shows the proper connections and color coding of the leads We strongly recommend that you test the unit before making a final installation You can set the unit on the floor and make temporary connections to test the unit Use electrical tape to cover all exposed wires Important e Connect the red power lead last after you have made and insulated all other connections Ground Connect the black ground lead of the power connector to the metal car chassis Speakers Connect the speaker wires See the wiring diagram page 52 for the proper hookups Follow the diagram carefully to avoid damaging the speakers and the stereo unit The speakers used must be able to handle more than 50 W of audio power If using an optional audio amplifier the speakers should be able to handle the maximum amplifier output power Speakers with low input ratings can be damaged Speaker impedance should measure 4 8 Q which is typically marked on most speakers Lower or higher impedance speakers will affect output and can cause both speaker and stereo unit damage Motor Antenna Connect the car motor antenna lead to the dark blue motor antenna relay control lead Do not confuse the antenna lead with blue white stripe lead for a power amplifier Battery Connect the yellow battery lead to the correct radio wire or to the battery fuse port on the fuse block Antenna Connect the antenna by plugging the ante
32. k Carolina Puerto Rico 00985 http www panasonic com YEFM284143 FT0903 2113 Panasonic Canada Inc 5770 Ambler Drive Mississauga Ontario L4W 2T3 http Awww panasonic ca Printed in China Imprim en Chine Impreso en China
33. media CD R CD RW CD ROM notes on CD Rs RWs OQ 8 47 O Anti Theft System sic cucterewedeeen stranded ccauinninecnteies 45 General eee eter errr errr rere etree rr rrr r 22 Remove the removable face plate install removable face plate security OJ WELCOME IO Power source volume mute attenuation indicator panel removal alarm S HDB Super High Definition Bass level meter display pattern i Installation Guide ccceceeeeeeeeeeeeeeeeeeeeaeeeaeaees 46 FAUIG sccexesedssepesecestnnbeeest ana a REEE 24 Ol FM O Radio mode band tuning display change Direct Memory D M station preset preset station calling Electrical Connections cceceeeeeeeeseeeeeereeeees 52 Wiring diagram upgrading the system 1 upgrading the system 2 speaker system connection Before Disc PlayOaGKk ices isccdnosecedowscsadetondethsadumncationss 26 Available discs disc insert when CD is in the player disc eject Sf D CD Player 27 Specifications 3 scscnr cau ccnssachsSedden imines uidacielumasentdecnates 57 Boy Display change track selection fast forward fast reverse pause random play ae scan play repeat play direct track selection MP3 WMA Playel sciwisensienvesisesiewtiviadedpedadiesadonsenteees 28 Ky Display change folder selection file selection fast forward fast reverse pause ay ID3 WMA tag setting random play folder random play scan play folder scan lt P play repeat play folder repeat play dire
34. mode and playback starts CD changer mode display Disc en Track Play time Note e Load a magazine with CDs when NO DISC is displayed e CDC EJECT is displayed when magazine is ejected in the CD changer mode CQ C3400 3300 3200 3100U 32 Changer 1 or 2 This lights only when the dual CD changer selector is connected RANDOM SCAN REPEAT A EE ee gt oo Display A V DISC 4 RANDOM 5 SCAN 6 REPEAT indicator lights when the changer is connected LAP lt lt gt gt MOSFET SOWxY jowenn EVE oom lt Aine gt KK TRACK o f L SAE nsr OREN BAND CD changer selection Display Change Press DISP display WE Track play time disc default Clock display Disc Selection A Next disc V Previous disc Track Selection gt A Next track lt 4 Beginning of the current track For the previous track press twice Fast Forward Fast Reverse Press and hold gt gt gt gt Fast forward Ka lt a A4 Fast reverse Release to resume the playback Track fast forward fast reverse SOURCE 0 to 9 Disc number 4 Random play 5 Scan play 6 Repeat play lt gt gt Track A V Disc Number BAND DISP CD changer Display selection Set Random Play EmA All the available tracks are played in a random sequence Press 4 RANDOM ENPI l
35. nna lead into the antenna receptacle Equipment Connect any optional equipment such as an amplifier according to the instructions furnished with the equipment Leave about 12 30 cm of distance between the speaker leads amplifier unit and the antenna antenna extension cord Read the operating and installation instructions of any equipment you will connect to this unit Power Connect the red power lead to the correct car radio wire or to the appropriate fuse port on the fuse block If the stereo unit functions properly with all these connections made disconnect the wires and proceed to the final installation Final Installation Lead Connections Connect all wires making sure that each connection is insulated and secure Bundle all loose wires and fasten them with tape so they will not fall down later Now insert the stereo unit into the mounting collar Congratulations After making a few final checks you re ready to enjoy your new auto stereo system Final Checks 1 Make sure that all wires are properly connected and insulated 2 Make sure that the stereo unit is securely held in the mounting collar 3 Turn on the ignition to check the unit for proper operation If you have difficulties consult your nearest authorized professional installer for assistance 49 CQ 3400 3300 3200 3100U Installation Guide continued Installation Procedures Remove the Unit First complete the elec
36. nting erminal firmly hole Rin ni a Using the rear support strap b Using the rubber cushion option Fire wall of car Rear support bracket Tapping screw sim a Y the car We Hex nut Rear support strap a Mounting bolt Mounting collar Mounting bolt Mounting collar CQ 3400 3300 3200 3100U 50 51 CQ 3400 3300 3200 3100U Electrical Connections Caution CORT co c3200U e This product is designed to operate with a 12 V e Be sure to insulate any exposed wires from Subwoofer cord ene DC negative ground battery system a possible short circuit from the car chassis CQ C3300U l re i e To prevent damage to the unit be sure to follow Bundle all cables and keep cable terminals free CO C3200U white the connection diagram below from touching any metal parts CD changer control e Remove approximately 1 4 5 mm of protective e Remember if your car has a drive computer or connector covering from the ends of the leads before a navigation computer the data of its memory connecting may be erased when the battery terminals are S e Do not insert the power connector into the unit disconnected ue I A until the wiring is completed Wiring Diagram Accessory used for wiring No Item Q ty Antenna Power connector 1
37. of the unit page 22 Press OPEN The face plate will be opened OPEN Push the face plate to either the right or left Pull it out toward you Contact ES ee Gently press the bottom of the case and open the cover Place the face plate into the case and take it with you when you leave the car Removable face plate case LF Install Removable Face Plate Fit the face plate with its left hole on one of the pins provided on the main unit Fit the other hole on the other pin applying slight pressure Move the face plate up and down a few times to make sure it is secure Then close the face plate and press down the right side of the face plate until it clicks into plate Contact Security Indicator The security indicator blinks when the face plate is removed from the unit This function is activated when the security function is on page 36 Security indicator Panel Removal Alarm This alarm sounds to warn you not to forget to remove the panel before leaving your car This function is activated when the security function is on page 36 CQ 3400 3300 3200 3100U 45 Installation Guide WARNING This installation information is designed for experienced installers and is not intended for non technical individuals It does not contain warnings or cautions of potential dangers involved in attempting to install this product Any at
38. operating ae ana control lead supplied with CX DP880U instructions for the devices connected e You cannot connect CD changer and Sirius receiver using the dual CD changer selector CA CD55U option CQ C3400 3300 3200 3100U 54 55 CQ 3400 3300 3200 3100U Speaker System Connection Example combination e Stereo power amplifier option e Subwoofer option Only for CQ C3400U CQ C3200U e Front speaker rear speaker option eee CUUF CQ C3200U Subwoofer cord RCA cord option an Ge RCA cord option Stereo power amplifier option bridged connection Stereo power amplifier option bridged connection 56 CQ 3400 3300 3200 3100U Electrical Connections continue Pre amp output connector rear Pre amp output connector front External amplifier control power lead Blue white stripe Remove the vinyl cap Subwoofer option Specifications General Power supply DC 12 V 11 V 16 V test voltage 14 4 V negative ground Current consumption Less than 2 2 A CD mode 0 5 W 4 speaker Maximum power output 50 Wx4 at 1 kHz volume control maximum Tone adjustment range Bass 12 dB at 100 Hz Treble 12 dB at 10 kHz Speaker impedance 4 8 Q Pre amp output voltage 2 5 V CD mode 1 kHz 0 dB Pre amp output impedance 200 Q HRE UNNE CO C3200U Subwoofer output voltage 2 5 V Subwoofer output impedance
39. s a break a short circuit poor contact or wrong wiring regarding the speaker wiring Some speakers are out of order Replace the speaker with new one The speaker wiring is confused between right and left Check the speaker wiring Perform the speaker wiring in accordance with the wiring diagram Check whether the antenna mounting position and its wiring are correct In addition check to see whether the antenna ground is securely connected to the chassis Antenna installation or wiring of antenna cable is faulty No power is supplied to the antenna Check the wiring of the antenna battery amplifier when using a film lead antenna etc Move to an area where receivable stations number is maximum and try presetting The number of receivable stations are less than 6 Make sure that the battery lead is connected securely and preset stations again CQ C3400 3300 3200 3100U The contact of the battery lead is poor or the battery lead is not always powered 39 Troubleshooting continued O CD MP3 WMA CO C3300U Q Remote Control Unit eee ca c3200u TESTI Possible solution Possible solution No response to The battery is inserted in the Insert a correct battery in the correct No playback or disc The disc is inserted upside down Insert a disc correctly cionan There is a flaw or foreign objects on Remove the foreign objects or use a the disc flawless disc The disc has unplayable formatt
40. splayed before adjusting the clock e Press and hold lt or gt to change numbers rapidly Display Change Press DISP display When the power is off Clock display CQ 3400 3300 3200 3100U 11 E E N E Contents N L L l l 3 Safety INFOrMAH ON sscssccssessssssisoessosaiesusteiabestsesbecnaseuissastonaastniea Page 2 OLA Audio Settings riage cticcheonncaren teed iatcooumadexicanseieteausmecs 34 F Precautions REPEAT T TEE CEA E O RE 2 Volume bass treble balance fader subwoofer level subwoofer low pass filter 1 ACCESSOMIES areren e e e oaa aa d a tucson te a iets 3 O O LPF mute attenuation 2 PONS EE E E tenereaonoieue 8 Security Setting ccceseeeeeseeeessseeeeeeseeeeseeeeeeseaes 36 Security function Before Reading these Instructions ccseeeeeeeeeee 9 gt TrOUDI SHOOtING ccc cece cece eceeeeeceeeeeeeeeeeeeeeeeeees 38 Preparation cteneeeeeneeeneesaaeeeeeesneeasensseneessesnaneeeeenegs 10 Preliminary steps if you suspect something wrong troubleshooting tips error Remote control unit subwoofer o O O O display messages maintenance product servicing fuse O O Notes n DISCS siisnsniacreernercermarimecmamumaaninniban ian 44 Glock Setting casicocscints ctedcecantinoteccoeumtockeatensesewebenanges 11 Notes on CD CD
41. tempt to install this product in a motor car by anyone other than a qualified installer could cause damage to the electrical system and could result in serious personal injury or death If your car is equipped with air bag and or anti theft systems specific procedures may be required for connection and disconnection of the battery to install this product Before attempting installation of this electronic component contact your car dealer or manufacturer to determine the required procedure and strictly follow their instructions FAILURE TO FOLLOW THE PROCEDURE MAY RESULT IN THE UNINTENDED DEPLOYMENT OF AIR BAGS OR ACTIVATION OF THE ANTI THEFT SYSTEM RESULTING IN DAMAGE TO THE VEHICLE AND PERSONAL INJURY CQ 3400 3300 3200 3100U Caution e This unit operates with a 12 V DC negative ground auto battery system only Do not attempt to use it in any other system Doing so could cause serious damage Installation Hardware No Item Diagram Q ty Mounting collar SS 1 Hex nut 5 mm 1 Rear support strap 1 E Tapping screw r 5 mm x16 mm S Mounting bolt 1 5 mm S amp S Power connector p 1 Trim plate eS 1 Required Tools You ll need a screwdriver a 1 5 V AA battery and the following 12 V DC Electrical tape Side cut Test bulb pliers Lex Overview This product should be installed by a professional However i
42. th the ignition and headlights off identify the car battery lead by grounding one lead of the test bulb to the chassis and checking the remaining exposed wires from the cut radio connector plug If your car is not wired for an audio unit Go to the fuse block and find the fuse port for the battery usually marked BAT Speakers Identify the car speaker leads There are two leads for each speaker which are usually color coded A handy way to identify the speaker leads and the speaker they are connected with is to test the leads using a 1 5 V AA battery as follows Hold one lead against one pole of the battery and stroke the other lead across the other pole You will hear a scraping sound in one of the speakers if you are holding a speaker lead If not keep testing different lead combinations until you have located all the speaker leads When you label them include the speaker location for each Antenna Motor If your car is equipped with an automatic power antenna identify the car motor antenna lead by connecting one bulb tester lead to the car battery lead and touching the remaining exposed wires from the cut radio connector plug one at a time You will hear the antenna motor activate when you touch the correct wire Antenna The antenna lead is a thick black wire with a metal plug at the end Connect All Leads Now that you have identified all the wires in the car you are ready to begin connecting them to the stereo unit w
43. the battery wiring in accordance frequently there is a possibility that with the wiring diagram poor contact or wrong wiring arises between the battery lead of the unit and the battery cable of the car The battery lead should be always powered Check the wiring Some operations are not executable Read the operating instructions in particular modes such as menu carefully and cancel the mode In case mode the unit is still out of order consult the dealer gt Noise is made in step with engine revolutions No sound from speaker s The speaker channels are reversed between right and left a Radio Poor reception or noise The number of auto preset stations are less than 6 Preset stations cannot be stored Possible solution There is an electromagnetic wave generator such as a cellular phone near the unit or its electrical lines Keep an electromagnetic wave generator such as a cellular phone away from the unit and the wiring of the unit In case the noise cannot be eliminated due to the wiring harness of the car consult your dealer The contact of the ground lead is Make sure that the ground lead is poor connected to an unpainted part of the chassis securely Alternator noise comes from the Change the wiring position of the Car ground lead Mount a noise filter on the power supply Readjust balance fader Balance fader setting is not appropriate There i
44. thin 128 characters e Name files and folders in accordance with the standard of each file system Refer to the instructions of writing software for details e ASCII character set and special characters in each language can be displayed ASCII character set A to Z ato z digits 0 to 9 and the following symbols space amp lt gt _ he Special characters aU a wm o m Note e With some software in which MP3 WMA format files have been encoded the character information may not be displayed properly e Undisplayable characters and symbols will be converted into an asterisk Windows Media and the Windows logo are trademarks or registered trademarks of Microsoft Corporation in the United States and or other countries CQ C3200U CQ C3100U cannot play MP3 WMA files Recording MP3 WMA Files on a CD Media e You are recommended to minimize the chances of making a disc that contains both CD DA files and MP3 WMA files e If CD DA files are on the same disc as MP3 or WMA files the songs may not play in the intended order or some songs may not play at all e When storing MP3 data and WMA data on the same disc use different folders for each data e Do not record files other than MP3 WMA files and unnecessary folder on a disc e The name of MP3 WMA file should be added by rules as shown in the following descriptions and also comply with the rules of each file
45. trical connections and then The included mounting collar is designed Switch off the power of the unit check them for correctness page 52 Specifically for this unit Do not use it to attach Be maye tia any other model 1 Remove the removable face plate page 45 Trim plate mounting collar and the trim plate D from the main unit temporarily which Insert mounting collar into the dashboard and bend the mounting tabs out with a screwdriver 2 Remove the trim plate with a screwdriver Aon aca The tabs to be bent vary depending on p i the car To securely install the unit fully bend a number of the tabs so that there is Power no rattling amp Insert the lock cancel plates along the P x connector Example grooves on both sides of the main unit O Insert until click is heard Mounting enn l Insert the tab springs gt Pull out the unit while pushing the plates end in the further inside outer groove Ur Click Secure the rear of the unit After fixing mounting bolt and power connector fix the rear of the unit to the car body by either method a or b shown below Insert trim plate Engage the mounting After installation springs gt in the reconnect the Sno Remove the unit pulling with both hands negative battery J Mounting bolt mounting holes of the ral mounting collar m Mou
46. ttery lead lt e SERIE one speaker to one set of ker To the car battery continuous 12 V DC Yellow speaker leads Ground lead lt A To aclean bare metallic part of the car chassis Black CQ C3400 3300 3200 3100U 52 53 CQ 3400 3300 3200 3100U Electrical Connections continue Upgrading the System 1 Note e For wiring carefully read the operating instructions for the devices connected Example combination e CD changer CX DP880U option CD changer R red RCA cord R CX DP880U option CD changer input cord RCA cord L DIN cord Extension cord supplied with CX DP880U CD changer control connector Upgrading the System 2 CD changer Example combination R red CX DP880U option e CD changer CX DP880U option Changer 1 e Dual CD changer selector CA CD55U option connecting cord RCA cord RCA cord Dual changer output cord mh sn supplied with CA CD55U L white R red l 3 aor Extension cord CD changer input cord _ supplied with CX DP880U L white R red CD changer DIN 2 gt extension cord m r CX DP880U option O supplied with CA CD55U RCA cord A OSSEO N l m D CN L white F E m o DIN cord Cutoff the tip Dual CD ch Ch 5 ve ua changer anger Power connector N a selector connecting cord Edensioweaid Note CA CD55U option i g e For wiring carefully read the
47. uthorized Panasonic Servicenter The product should be serviced only by a qualified technician Fuse Use fuses of the same specified rating 15 A Using different substitutes or fuses with higher ratings or connecting the unit directly without a fuse could cause fire or damage to the unit If the replacement fuse fails contact your nearest Panasonic Servicenter for service CQ 3400 3300 3200 3100U 43 44 Notes on Discs Notes on CD CD Media CD R CD RW CD ROM either of these labels below COMPACT DIGITAL AUDIO COMPACT WISE Only for CQ C3400U CQ C3300U W 4 N lf you use commercial CDs they must have How to hold the disc e Do not touch the underside of the disc e Do not scratch the disc e Do not bend the disc e When not in use keep the disc in the case Label side Do not use irregularly shaped discs S Do not leave discs on the following places e Direct sunlight e Near car heaters e Dirty dusty and damp areas e Seats and dashboards Disc cleaning Use a dry soft cloth to wipe from the center outward lt Correct gt lt Wrong gt Do not attach any seals or labels to your discs Do not write anything on the disc label with a pointed pen or hard point pen CQ C3400 3300 3200 3100U Notes on CD Rs RWs e You may have trouble playing back some CD R RW discs recorded on CD recorders CD R RW drives either due to their recordin
48. woofer option Only for CQ C3400U CQ C3200U Stereo power amplifier option CD changer CX DP880U option Note e This unit does not support Sirius satellite radio e You cannot connect CD changer and Sirius receiver using the dual CD changer selector CA CD55U option Before Reading these Instructions mentioned below e All illustrations represent model CQ C3400U unless otherwise specified e This operating instruction manual applies to the following models The differences among these models are Models Foaie TEE ca c3300u ca c3200u AO MP3 WMA playback Yes Yes None None CD text display Yes Yes None None Subwoofer output Yes None Yes None Subwoofer low pass filter setting 80 Hz 120 Hz None None None This can only be controlled through the omo main unit lt gt This can only be controlled through the p remote control unit Operations with neither mark can be performed either by the main unit or the remote control unit WHEE CQ C3400U only CQ C3300U only CQ C3300U CQ C3200U Indicates features applicable to CQ C3200U only EEA ca c3100u only CQ 3400 3300 3200 3100U Preparation Lithium battery included Back side Battery holder om Position A Battery Installation Remove the battery holder Pull the holder out at position B while pushing position A as indicated
Download Pdf Manuals
Related Search