Home

JVC HR-S5902

1. PARTS LABOR lyr 90pays THIS LIMITED WARRANTY IS VALID ONLY IN THE FIFTY 50 UNITED STATES THE DISTRICT OF COLUMBIA AND IN COMMONWEALTH OF PUERTO RICO WHAT WE WILL DO If this product is found to be defective JVC will repair or replace defective parts at no charge to the original owner Such repair and replacement services shall be rendered by JVC during normal business hours at JVC authorized service centers Parts used for replacement are warranted only for the remainder of the Warranty Period All products and parts thereof may be brought to a JVC authorized service center on a carry in basis except for Television sets having a screen size 25 inches and above which are covered on an in home basis WHAT YOU MUST DO FOR WARRANTY SERVICE Return your product to a JVC authorized service center with a copy of your bill of sale For your nearest JVC authorized service center please call toll free 800 537 5722 If service is not available locally box the product carefully preferably in the original carton and ship insured with a copy of your bill of sale plus a letter of explanation of the problem to the nearest JVC Factory Service Center the name and location of which will be given to you by the toll free number If you have any questions concerning your JVC Product please contact our Customer Relations Department WHAT IS NOT COVERED This limited warranty provided by JVC does not cover 1 Products which have been subject to
2. SERVICING 1 Servicing If your product is not operating correctly or exhibits a marked change in performance and you are unable to restore normal operation by following the detailed procedure in its operating instructions do not attempt to service it yourself as opening or removing covers may expose you to dangerous voltage or other hazards Refer all servicing to qualified service personnel 2 Damage Requiring Service Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions a When the power supply cord or plug is damaged b If liquid has been spilled or objects have fallen into the product c If the product has been exposed to rain or water d If the product does not operate normally by following the operating instructions Adjust only those controls that are covered by the operating instructions as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to its normal operation e If the product has been dropped or damaged in anyway f When the product exhibits a distinct change in performance this indicates a need for service 3 Replacement Parts When replacement parts are required be sure the service technician has used replacement parts specified by the manufacturer or which have the same characteristics as the original part Unauthorized substitutions
3. on a surface that is unstable or subject to vibration 2 DO NOT block the VCR s ventilation openings 3 DO NOT place heavy objects on the VCR or on the Remote 4 DO NOT place anything which might spill on the top of the VCR or on the Remote 5 AVOID violent shocks to the VCR during transport VCR Plus C and PlusCode are registered trademarks of Gemstar Development Corporation The VCR Plus system is manufactured under license from Gemstar Development Corporation For Customer Use Enter below the Model No and Serial No which are located on the rear of cabinet Retain this information for future reference Model No Serial No SVS any Cassettes marked S VHS and VHS can be used with this video cassette recorder However S VHS recordings are possible only with cassettes marked S VHS By using S VHS ET it is possible to record and play back with S VHS picture quality on VHS cassettes with this VCR As an ENERGY STAR Partner JVC has determined that this product or product model meets the ENERGY STAR guidelines for energy efficiency IMPORTANT PRODUCT SAFETY INSTRUCTIONS Electrical energy can perform many useful functions But improper use can result in potential electrical shock or fire hazards This product has been engineered and manufactured to assure your personal safety In order not to defeat the built in safeguards observe the following basic rules for its installation use an
4. Even though you do not use an external cable box Set CABLE BOX SET to OFF or DBS RECEIVER scheduled but the channel or DBS receiver CABLE BOX SET is set to ON SET is set to OFF F pg 8 is always incorrect or DBS RECEIVER SET is set to ON You moved and now VCR J The receivable stations in the new area are Re perform the procedure in Changing VCR Plus system does not received on different channels than those in the Plus Setting pg 12 work properly previous area Other Problems SYMPTOM POSSIBLE CAUSE CORRECTIVE ACTION The channel cannot be Recording is in progress Press PAUSE Ill to pause the recording change changed channels then press PLAY B gt to resume recording Even though Auto or The clock setting data received from the host Select a different host channel during Semiauto Semiauto Clock Set has channel is incorrect Clock Set pg 6 or perform Manual Clock Set been performed the clock C pg 6 is incorrect ee FOR SERVICING Only in U S A HOW TO LOCATE YOUR JVC SERVICE CENTER TOLL FREE 1 800 537 5722 http www jvc com Dear Customer In order to receive the most satisfaction from your purchase please read the instruction booklet before operating the unit In the event that repair is necessary or for the address nearest your location within the Continental United States please call 1 800 537 5722 for your neares
5. Playback SYMPTOM POSSIBLE CAUSE CORRECTIVE ACTION The tape is running but the J If the RF connection I pg 5 is used to view the f Select channel 3 or 4 on the TV picture will not appear picture the channel on the TV is set incorrectly f the AV or S video connection CF pg 5 is used f Select the AV mode on the TV to view the picture the TV receiver is set to the wrong mode Recording SYMPTOM POSSIBLE CAUSE CORRECTIVE ACTION Recording will not start There is no cassette loaded Insert a cassette on which the record safety tab is intact The loaded cassette has had its record safety tab f Remove the cassette and cover the hole with removed adhesive tape or load a cassette on which the record safety tab is intact Timer Recording SYMPTOM POSSIBLE CAUSE CORRECTIVE ACTION Timer recording will not The clock and or the timer program have been set Set the clock and or timer program correctly work incorrectly The timer is not engaged Press TIMER to engage the timer and make sure that appears on the display panel The VCR has not been set up properly Re perform the set up procedures Make sure you have compensated for guide channel and VCR or cable box channel number mismatches gt pg 12 Timer programing will not Timer recording is in progress Timer programing cannot be performed when work timer recording is in progress Wait until it finishes Timer recording begins as
6. 3 Overloading Do not overload wall outlets extension cords or integral convenience receptacles as this can result in a risk of fire or electric shock 4 Power Cord Protection Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them paying particular attention to cords at plugs convenience receptacles and the point where they exit from the product 5 Ventilation Slots and openings in the cabinet are provided for ventilation To ensure reliable operation of the product and to protect it from overheating these openings must not be blocked or covered Do not block the openings by placing the product on a bed sofa rug or other similar surface Do not place the product in a built in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer s instructions have been adhered to 6 Wall or Ceiling Mounting The product should be mounted to a wall or ceiling only as recommended by the manufacturer ANTENNA INSTALLATION INSTRUCTIONS 1 Outdoor Antenna Grounding If an outside antenna or cable system is connected to the product be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built up static charges Article 810 of the National Electrical Code ANSI NFPA 70 provides information with regard to proper grounding of the mast and supporting structure grounding
7. CH DAILY M F Number key 8 WEEKLY Number key 9 and or SP EP when the Program screen on which you want to make changes is shown then press OK or f the overlap is not yet solved the conflicting programs will be shown on the Program check screen Repeat the above steps again l Other Functions Timer warning display A warning appears on the TV screen to tell EA RECORDING you that the timer recording is to start in TO 5 minutes if you are not in the timer recording standby mode at that time Press TIMER to put the VCR into timer recording standby mode To clear the display press CANCEL on the Remote Checking tape position When you change the VCR operation mode from the stop mode to fast forward or rewind mode or when you perform an E E E Index Search F pg 10 or Instant Review REMAIN io F pg 10 the tape position indicator COUNT 1 23 45 appears The position of F in relation to B Beginning or E End shows you where you are on the tape Set SUPERIMPOSE to ON F pg 15 Changing display information Each time you press DISPLAY the display panel shows the channel number and the clock time alternatively You can change display in the stop or recording s mode or during rewind fast forward EmA When SUPERIMPOSE is set to ON C pg 15 and DISPLAY on the Remote is pressed time counter and tape remaining time will appear on
8. 2 seconds NOTE It is not possible to select the Automatic Timer Standby function if the cassette s record safety tab is removed Playing back tape repeatedly 100 times Repeat Play During playback press and hold PLAY B gt for more than 5 seconds The play indicator E gt on the display panel starts blinking slowly To stop playback press STOP MM on the Remote or STOP EJECT Ml on the VCR Locating beginning of recordings Index Search Index codes are placed on the tape at the beginning of each recording when recording on this VCR E While the tape is not running press SHUTTLE PLUS lt 4 or P gt on the Remote to start search PA To access a recording of 2 to 9 index codes away press kad or P repeatedly until the correct number is displayed on the screen only if SUPERIMPOSE is set to ON C pg 15 Playback begins automatically when the desired recording is located Beginning of the Current Beginning of the current program position on 2nd next program recorded the tape recorded Previous Next program recorded 2ndl next program recorded Locating beginning of timer recordings Instant Review After ensuring that the VCR is turned off and that the timer mode is disengaged press REVIEW The VCR turns on and rewinds to the index code indicating the beginning of the last timer recorded program then begins playback automatically You can access a p
9. Changing Remote Control Code x4 cicieve acceler seneetailte 17 EGINO sectssscvsccstuciteshecacceshonscitecuckeuticsesaliettesSosesl case aelsbdaealieis 18 Editing With Another YCR ersceniote trai a 18 Audio DUDDA Sorire 19 Insert Editing and AV Dubbing iivncsAelewnsacekaven x 19 SPECIIICOTIONS a srne 20 Troubleshooting ssssscsesisdsosostacseoncoraniosaneasaireasoiiis aa aaa 21 FOR SERVICING Only in U S A seosecossoscooecoscoseooscoscosecossossoseosse 22 WARRANTY Only in U S A sccsscsssssssseseseseseseseseseseseseceseseseces 23 VIDEO CASSETTE RECORDER HR S5902 5912U SVHS JPI Ge z Co Super VHS ET INSTRUCTIONS Dear Customer Thank you for purchasing the JVC S VHS video cassette recorder Before use please read the safety information and precautions to ensure safe use of your new VCR CAUTIONS A CAUTION CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER OR BACK NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons The exclamation point within an equilateral triangle is intended to alert the user to the presence of important oper
10. Channel Set screen Press AV to move the highlight bar arrow to GUIDE CHANNEL SET then press OK or gt Input guide channel number Press V or the Number keys to select the VCR Plus guide channel number as shown in the TV listing then press OK or gt GUIDE CHANNEL SET S VCRCH 4 5 PRESS NUMBER KEY 0 9 R a v THEN OK PRESS MENU TO END EJ Input receiving channel number Press V or the Number keys to select the number of the channel on which the guide channel s broadcasts are received then press OK or Repeat steps Ef and B for each instance EJ Return to normal screen Press MENU on the Remote GUIDE CHANNEL SET GUIDE CH ys amp VCR CH 47 PRESS NUMBER KEY 0 9 OR 4 4 THEN OK PRESS MENU TO END VCR Plus Timer Programing The PlusCode programing numbers are the numbers next to the program in most TV listing Load a cassette with the record safety tab intact The VCR turns on and the counter is reset automatically 1 Press PROG on the Remote to access the PlusCode No screen PLUSCODE NO gt PRESS NUMBER KEY 0 9 PRESS TO SET EXPRESS PROGRAMMING PRESS PROG TO END FA Press the appropriate Number keys to input the PlusCode number then press OK or Check to make sure the setting is accurate on the Program screen PROGRAM 1 PLUSCODE N PLUSCODE NO 12345678 1234567 8 M 8 00PM gt 1
11. INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR PARTICULAR PURPOSE ARE LIMITED TO THE WARRANTY PERIOD SET FORTH ABOVE Some states do not allow the exclusion of incidental or consequential damages or limitations on how long an implied warranty lasts so these limitations or exclusions may not apply to you This warranty gives you specific legal rights and you may also have other rights which vary from state to state JVC COMPANY OF AMERICA 1700 Valley Road DIVISION OF JVC AMERICAS CORP Wayne New Jersey 07470 REFURBISHED PRODUCTS CARRY A SEPARATE WARRANTY THIS WARRANTY DOES NOT APPLY FOR DETAILS OF REFURBISHED PRODUCT WARRANTY PLEASE REFER TO THE REFURBISHED PRODUCT WARRANTY INFORMATION PACKAGED WITH EACH REFURBISHED PRODUCT For customer use Enter below the Model No and Serial No which is located either on the rear bottom or side of the cabinet Retain this information for future reference Model No Serial No Purchase date Name of dealer VICTOR COMPANY OF JAPAN LIMITED Printed in China COPYRIGHT 2003 VICTOR COMPANY OF JAPAN LTD 0103 AH PJKBJ
12. Remote Press V to move the highlight bar arrow to TUNER SET then press OK or gt PRESS 4 THEN OK PRESS MENU TO END FA Access Manual Channel Set screen Press AV to move the highlight bar arrow to MANUAL CHANNEL SET then press OK or D gt TUNER SET BAND AUTO CHANNEL SET gt MANUAL CHANNEL SET SELECT WITH 4 AND OK PRESS MENU TO END EJ Add or skip desired channels To add channels Press the Number keys on the Remote to input a channel number you want to MANUAL CHANNEL SET ror CH 45 ADD 4 gt add PRESS NUMBER KEY 0 9 OR 4 Y THEN OK 2 Press OK or gt to set to ADD PRESS MENU TO END o Repeat 1 to 2 to add other channels Press MENU to return to normal screen To skip channels Press V or the Number keys to select a channel number you want to skip Press OK or gt to set to SKIP Repeat 1 and 2 to skip other channels Press MENU to return to normal screen M o After a power failure occurs band selection will be reset to CATV Cable Box and or DBS Receiver Control Setting The following procedure is required if you receive your TV channels through a cable box descrambler and or if you receive satellite channels through DBS Direct Broadcast Satellite receiver The Controller allows the VCR t
13. Set S VHS ET to OFF F pg 15 To record in VHS on an S VHS cassette Insert a cassette marked S VHS The S VHS indicator lights up on the display panel Then set S VHS MODE to OFF C pg 16 The S VHS indicator goes off The VHS recording mode is selected NOTE When playing back a tape that has been recorded in S VHS or S VHS ET the S VHS indicator lights up on the display panel regardless of the S VHS ET 7 pg 15 or S VHS MODE C pg 16 setting a G aa i Timer Recording Up to 8 timer recording programs can be made using VCR Plus timer programing Express timer programing or 24HR Quick Programing method as far as a year in advance Remember the clock must be set before you can program the timer Turn on the VCR and TV and select the VCR channel or AV mode NOTES f all the 8 programs have already been set PROGRAM FULL appears on the TV screen After timer recording is completed the VCR turns off automatically You can program the timer recording while a regular recording is in progress the menu screens will not be recorded To timer record cable or satellite channels perform Cable Box and or DBS Receiver Control Setting pg 7 and be sure to keep the cable box or DBS receiver turned on Fven if a power failure occurs the VCR keeps your timer programs However the clock time channel settings and other menu settings are lost As a resul
14. The VCR turns off CL appears for about 5 seconds on the display panel To release the child lock press and hold POWER on the Remote until the VCR turns on NOTES Pressing TIMER during timer recording unplugging the AC power cord or a power outage also releases the child lock Even if the child lock function is in use it is possible to engage and disengage the timer mode with TIMER on the Remote Keep the Remote out of the children s reach Timer recording programs will be performed even if the child lock function is activated CONTINUED ON NEXT PAGE LG Multi Brand Remote Control This Remote can control some functions of remote controllable TVs cable boxes or DBS Direct Broadcast Satellite receivers listed below Without setting you can control a JVC TV NOTES Some unit s brands have more than one code If the unit does not function with a specified code try other codes Depending on the type of unit some or all functions cannot be operated using this Remote t is not possible to operate a unit not equipped with a remote sensor It is not possible to set the Remote for both your cable box and a DBS receiver at the same time Once you have set the Remote to operate the unit you do not have to set it until you replace the batteries from the Remote f the batteries of the Remote are discharged the Remote may not be able to control the TV cable box or DBS receiver Re
15. VCR turns off automatically and is displayed on the display panel 24HR Quick Programing You can program a timer recording that starts within 24 hours using the JOG dial on the VCR Load a cassette with the record safety tab intact The VCR turns on and the counter is reset automatically EF Press 24HR QUICK PROGRAM onthe VCR 497 starts blinking on the display panel F PA Turn the JOG dial to the left or right to set the start time One click stop of the JOG dial changes aan the time in 5 minute intervals ys Li Push the JOG dial O starts blinking on Stop time the display panel Turn the JOG dial to the cnn left or right to set the stop time oo SO0 To set the tape speed press SP EP The YN wg current setting for the tape speed appears on the display panel for about 5 seconds Press SP EP again to change the setting while tape speed is displayed EJ Push the JOG dial Turn the JOG dial to the left or right to select the channel then press 24HR QUICK PROGRAM The VCR turns off automatically and is displayed on the display panel PROGRAM 1 START STOP co a TE 12 24 03 EM gd WED DBS PRESS SP EP 8 DAILY 9 WEEKLY 7 DBS THEN 0K PRESS PROG TO END MeL l aN wv Start time Li PM 4 Channel number NOTES If Err appears on the display panel repeat the above steps again When a menu s
16. normal playback Each time you press kad or Pl or each time JOG dial passes a click position the playback speed changes To decrease the speed during picture search press the opposite direction button repeatedly or turn the dial in the opposite direction During still picture press and hold Bl to start forward or ked to start reverse slow motion playback When you release the button still picture resumes During still picture holding PAUSE If for more than 2 seconds also starts forward slow motion playback If you press PAUSE If again still picture resumes NOTE During slow motion some noise may appear on the TV screen Press CH on the Remote to eliminate the noise Reverse Forward Reverse Reverse slow play motion 2 steps Reverse search 2 steps When the tape is not running Rewind fast forward Press REW lt lt or FF PP OR Turn the JOG dial to the left or right Eject the cassette Press STOP EJECT Ml 4 You can also eject the cassette when the VCR is turned off Turn off the VCR Press POWER O I Playback Features Turn on the VCR and TV and select the VCR channel or AV mode Adjusting tracking condition Tracking Adjustment Automatic tracking adjustment Whenever you insert a tape and start playback automatic tracking starts working and continuously analyzes the signal to enable optimum picture quality during playback Manual tracking adjustmen
17. of the lead in wire to an antenna discharge unit size of grounding connectors location of antenna discharge unit connection to grounding electrodes and requirements for the grounding electrode EES 2 Lightning For added protection for this product during a lightning storm or when it is left unattended and unused for long periods of time unplug it from the wall outlet and disconnect the antenna or cable system This will prevent damage to the product due to lightning and power line surges 3 Power Lines An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits or where it can fall into such power lines or circuits When installing an outside antenna system extreme care should be taken to keep from touching such power lines or Circuits as contact with them might be fatal USE 1 Accessories To avoid personal injury Do not place this product on an unstable cart stand tripod bracket or table It may fall causing serious injury to a child or adult and serious damage to the product Use only with a cart stand tripod bracket or table recommended by the manufacturer or sold with the product Use a mounting accessory recommended by the manufacturer and follow the manufacturer s instructions for any mounting of the product Do not try to roll a cart with small casters across thresholds or deep pile carpets 2 Product and Cart C
18. on most S VHS VCRs or VHS VCRs equipped with the S VHS ET function or VHS VCR equipped with the SQPB S VHS QUASI PLAYBACK function When this function is set to ON the S VHS indicator lights up on the display panel NOTES Before recording set VIDEO CALIBRATION to ON c See below You cannot activate the S VHS ET function while recording gt pg 11 timer recording F pg 12 or Instant Timer Recording pg 11 or the VIDEO CALIBRATION function lt See below is in progress The S VHS ET function does not work with S VHS cassettes To keep the highest quality recording and playback pictures over a long period of time S VHS recording on S VHS cassettes is recommended Use of high grade tapes is recommended for S VHS ET recordings On some tapes picture quality will not improve even if the S VHS ET function is used Check the recording quality before you start important recordings E VIDEO CALIBRATION ON OFF When this function is set to ON this VCR checks the condition of the tape in use during playback and recording and compensates to provide the highest possible pictures This takes place whenever you play back a tape or start recording after inserting a tape NOTE The VCR checks the tape condition for about 7 seconds then starts recording To make sure you record the desired scene or program completely perform the following steps Press and hold PAUSE Il and p
19. programmable timer 8 programs Memory backup for timer is not supported ACCESSORIES Provided accessories Infrared remote control unit AA battery x 2 S video cable 4 pin RF cable F type Specifications shown are for SP mode unless specified otherwise E amp O E Design and specifications subject to change without notice EEs o n f Troubleshooting Before requesting service use this chart and see if you can repair the trouble yourself Small problems are often easily corrected and this can save you from the trouble of sending your VCR off for repair Power SYMPTOM POSSIBLE CAUSE CORRECTIVE ACTION The power will not come J The AC power cord is disconnected Connect the AC power cord on The Child Lock function is activated Press and hold POWER for more than 10 seconds to release the Child Lock function C pg 16 The clock works but the f The VCR is in the timer recording standby mode _ Press TIMER to disengage the timer VCR s power will not come with AUTO TIMER set to OFF F pg 15 on The Child Lock function is activated Press and hold POWER for more than 10 seconds to release the Child Lock function C pg 16 The Remote will not The batteries are discharged Replace batteries function The VCR is in the timer recording standby mode Press TIMER to disengage the timer Remote control A B code is wrong Reset A B code I pg 17
20. than 5 seconds while the VCR is turned off The code currently set appears on the display panel EJ Change code for VCR Press any key on the Remote The VCR now responds to B code control signals To set the Remote and the VCR back to A code control signals repeat the same procedure as shown above except pressing the Number key 1 in step 2 of EI To control two VCRs with the same Remote You can control two JVC VCRs by switching the remote control code for the Remote between A and B c step I keeping two VCRs to different control codes To change only the remote control code for the Remote DO NOT perform steps H and El i Editing Editing with Another VCR You can use your VCR as the playback or recording VCR You can use a camcorder as the playback VCR and your VCR as the recording VCR Refer also to the other components instruction manuals for connection and its operations EF Make connections Example 1 When another VCR is VHS VCR This VCR To AUDIO VIDEO IN To AUDIO VIDEO OUT When using this VCR as the recording VCR connect this VCR s AUDIO VIDEO IN When using this VCR as the playback VCR connect this VCR s AUDIO VIDEO OUT connectors to the audio video input connectors on another VCR connectors to the audio video output connectors on another VCR U U U J ii J To audio video input Another VCR f another VCR is monaural connect this VCR s AUDIO L IN or OUT
21. the TV screen To reset the time counter press C RESET on the Remote Function settings You can use the other useful function settings on the Function Set screen EE Access Main Menu screen then Function Set screen Press MENU on the Remote Press V to move the highlight bar arrow to FUNCTION SET then press OK or FA Select Function Press AV to move the highlight bar arrow to the function you want to set MAIN MENU FUNCTION SET TUNER SET INITIAL SET PRESS a v THEN OK PRESS MENU TO END FUNCTION PREVIOUS PAGE PREVIOUS PAGE S VHS ET F gt VIDEO STABILIZER OFF VIDEO CALIBRATION ON BLUE BACK ON REAR AUX INPUT VIDEO PICTURE CONTROL AUTO 2ND AUDIO RECORD OFF R OFF AUDIO MONITOR HI FI SUPERIMPOSE S VHS MODE ON AV COMPU LINK ON NEXT PAGE SELECT WITH 4 AND OK PRESS MENU TO END ON AUTO SP gt EP TIMER OFF NEXT PAGE SELECT WITH 4 7 AND OK PRESS MENU TO END SELECT WITH V AND OK PRESS MENU TO END E Change setting Press OK or The default setting is bold in the table below Press MENU to return to normal screen After a power failure occurs Function Settings will be reset to its default setting CONTINUED ON NEXT PAGE 14 E S VHS ET ON OFF When this function is set to ON you can record on VHS cassettes with S VHS picture quality Tapes recorded using this function can be played back
22. 0 00PM DATE CH 12 24 03 12 SP WED PRESS NUMBER KEY 0 9 PRESS 8 DAILY 9 WEEKLY THEN OK STOP STOP TIME SP EP PRESS PROG TO END PRESS PROG TO END If the Guide Channel Set screen appears after pressing OK press the Number keys CH or AV to input the number of the channel on which the broadcast for the PlusCode number is received on the VCR or cable box then press OK To set the tape speed press SP EP To change the stop time press STOP To timer record daily Monday Friday or weekly serials press DAILY M F Number key 8 or WEEKLY Number key 9 Pressing the button again makes the DAILY or WEEKLY display disappear If you made a mistake press CANCEL to access the PlusCode No screen again If an incorrect PlusCode number or the one for a broadcast already finished has been inputted ERROR is displayed for about 5 seconds then the PlusCode No screen reappears Press OK or PROG If PROGRAM NOT COMPLETED PROGRAM OVERLAP appears see Program overlap warning display F pg 14 EY Press TIMER The VCR turns off automatically and is displayed on the display panel GUIDE CHANNEL SET GUIDE CH 312 VCR CH PRESS NUMBER KEY 0 9 OR 4 THEN OK PRESS PROG TO END CONTINUED ON NEXT PAGE Express Timer Programing Load a cassette with the record safety tab intact The VCR turns on and the counter is reset autom
23. 5 press TV VCR on the Remote so that the VCR mode indicator lights on the display panel to view the program to be recorded E Set tape speed Press SP EP The selected tape speed will appear on the TV screen NOTE You can select tape speed in the stop mode or during recording pause mode E1 Start recording On the VCR press REC Or on the Remote while holding REC press PLAY P NOTE If VIDEO CALIBRATION is set to ON F pg 15 default setting the VCR takes about 7 seconds to assess the quality of the tape in use then recording begins with the picture level optimized During recording Pause recording Press PAUSE ID Press PLAY P gt to resume recording You can select channel in the recording pause mode Stop recording OR Press STOP EJECT W on the VCR Press STOP W on the Remote NOTE If the tape reaches its end during recording the recording stops and and gt on the display panel blink Press STOP EJECT on the VCR to eject the cassette or press REW lt lt 4 on the Remote to rewind the tape Recording Features Turn on the VCR and TV and select the VCR channel or AV mode Specifying recording length Instant Timer Recording ITR During recording press REC on the VCR repeatedly until the recording length you want appears on the display panel The record indicator O on the display panel starts blinking Each ti
24. BS receiver are used it is recommended that you connect the DBS receiver to your VCR s AUDIO VIDEO IN connectors and the cable box to your VCR s ANT IN connector CONTINUED ON NEXT PAGE EJ Connect Controller to VCR Connect the Controller to the CABLE BOX Controller connector on the rear panel EJ Turn on cable box or DBS receiver Select a channel other than channel 9 on your cable box or channels 100 205 on your DBS receiver EJ Access Main Menu screen then Initial Set screen on VCR Press MENU on the Remote Press AV to move the highlight bar arrow to INITIAL SET then press OK or gt Access Cable Box Set screen or DBS Receiver Set screen Press AV to move the highlight bar arrow to CABLE BOX SET or DBS RECEIVER SET then press OK or gt INITIAL SET CLOCK SET LANGUAGE ENGLISH GUIDE CHANNEL SET CABLE BOX SET DBS RECEIVER SET SELECT WITH 4 AND OK PRESS MENU TO END EJ Select output channel Your selection depends on how the unit is connected to your VCR If the unit is connected to your VCR s ANT IN terminal on the rear panel Press AV until the channel number representing the cable box s output CH2 CH9 or DBS receiver s output CH3 or CH4 appears on the screen If the unit is connected to your VCR s AUDIO VIDEO IN connectors on the front panel press AV until ON F 1 FRONT appears on the screen If the unit is connected to your VCR s A
25. Editing and AV Dubbing are possible by using the audio video input connectors on the front panel or on the rear panel This VCR for recording To AUDIO VIDEO IN t t T l N T To S VIDEO IN S video cable supplied Audio video cable not supplied ur To audio video output J J Another VCR for playback i af To S video output PA Select input mode Select F 1 when connecting the other component to the audio video input connectors on the front panel Select L 1 when connecting the other component to the audio video input connectors on the rear panel Press AUX or CH on the Remote Or push the JOG dial then turn it to the left or right CONTINUED ON NEXT PAGE a EJ Select video input connector Select the appropriate mode depending on the connector being used CF pg 16 When using S VIDEO input connector on the front panel set FRONT AUX INPUT to S VIDEO When using S VIDEO IN connector on the rear panel set REAR AUX INPUT to S VIDEO When using VIDEO input connector on the front panel set FRONT AUX INPUT to VIDEO When using VIDEO IN connector on the rear panel set REAR AUX INPUT to VIDEO EJ Select edit mode Set the edit mode to ON for the VCRs if such a mode is equipped On this VCR set PICTURE CONTROL to EDIT pg 15 E Locate end point Load the cassette to be edited into the VCR and pr
26. JV LPT0732 001A Buttons Connectors and Indicators cccccccccscccssccsscccccessccsscessee 4 Connections and Plug amp Play Setting sscscscscssssssssssssssssssssees 5 Initial Serg cctosc dest ccebcest tA Peed dc aseceebcitecies Geese nascetehcadeesede tases 6 Lano aCe SCO au a a NA 6 COCK SEMINE seene a a G beth pinto ebeatocayee tenis 6 TUNET SCHNE re ETE A A AN vans 7 Cable Box and or DBS Receiver Control Setting 0 0 0 0 7 PHO DGC A NEE A ices A EEE AT E eee 9 BASIG PIAVOACK morenas ani E e E ANN 9 Playback Features ariera e a curate meet ale 9 Recordin Ne ee Pes araa aa A aa 11 BASIC RECOMOUMGY Sretan ngea E A vache 11 Recording FEANFES iara vuhas birt sh voihcclee 11 Timer Recording 2S Oca CU ssa De 12 Changing VCR Plus Setting sa saceas sees efetenrssemieemricntentervees 12 VER Piist Timer Programing 4esdisessuiet ea taesrycsia eevee eiesienes 12 Express Tiner PF LOSFOIIN eG dsrs cite r a aus siaioacnate cay 13 ZATARS QUICK Progra sieren ea eaten 13 Oiher Functions azionare aces oentrarto aaa aatan aoea iai ae 14 Timer warming displays ersari aea Aaa 14 CHECKING Tape POSION 153258 notes a ae 14 Changing display information incuinec ene Osa aes 14 PUMGCUONRSEIUINGS ssia E EA 14 Satellite Auto Recording sacicocossuestdciatinaveensschestoeneiediiatinneuenheet 16 CPUT LOCK orari EE E E nas aoa 16 Multi Brand Remote Control ssessssssseesseesssssererssssssererrsssseseen 17
27. K If the cable box s channel does not CHANGE TO CHANNEL 09 change to 9 NO 1 Press AV to move the highlight bar FRESS A 7 THENOK PRESS MENU TO END arrow to NO then press OK or gt 2 Repeat step W until the cable box s channel changes to 9 by entering another code 3 If the channel does not change after going through all the code For DBS receiver numbers listed for your model of cable box then try all the other numbers DBS RECEIVER BRAND SET If the DBS receiver s channel changes to 54 the channel listed below for your brand AiD YOUR pas REceER setting is complete Press OK or CHANGE TO CHANNEL 2057 JVC gt 100 SONY 205 NO PRESS a v THEN OK PRESS MENU TO END ECHOSTAR 205 RCA 205 If the DBS receiver s channel does not change as shown above Press V to move the highlight bar arrow to NO then press OK or gt M Repeat step W Playback Basic Playback Turn on the VCR and TV and select the VCR channel or AV mode EF Load a cassette Make sure the window side is up the rear label side is facing you and the arrow on the front of the cassette is pointing towards the VCR Do not apply too much pressure when inserting The VCR turns on and the counter on the on screen display is res
28. TV and select the VCR channel or AV mode El Connect a DBS receiver to the AUDIO VIDEO IN or S VIDEO IN connectors on the rear panel You can also connect the cable box if it has a timer To use these connectors you have to select which one to use t See above REAR AUX INPUT PA Set timer program on DBS receiver referring to its instruction manual EY Load a cassette with the record safety tab intact EJ Press SP EP to set the tape speed The selected tape speed will appear on the TV screen El Press REC LINK for more than 2 seconds The VCR turns off automatically and enter the Satellite Auto Recording standby mode L 1 and light up When signals come into the VCR from the DBS receiver the VCR starts recording and light up and L 1 blinks When no signals come into the VCR the VCR stops recording O goes off NOTES Be sure not to turn on the DBS receiver before the program starts broadcasting otherwise the VCR will start recording when the DBS receiver is turned on To disengage the Satellite Auto Recording standby mode press REC LINK goes off Depending on the type of satellite receiver Satellite Auto Recording may not be compatible Child Lock Turn on the VCR and TV and select the VCR channel or AV mode You can disable the VCR operations While the VCR is turned on press and hold POWER O I on the Remote for more than 10 seconds
29. UDIO VIDEO IN connectors on the rear panel press AV until ON L 1 REAR appears on the screen If you do not use any unit press AV until OFF appears on the screen EJ Access Brand Set screen Press OK or f the Clock Set screen appears perform Manual Clock Set If you press MENU after the clock has been set the Brand Set screen appears CABLE BOX SET N 4 PRESS 4 THEN OK PRESS MENU TO END IM Enter brand code and perform test Press the appropriate Number keys on the Remote to enter the brand code from the following list then press OK or gt ARCHER CABLETENNA CABLEVIEW CITIZEN CURTIS DIAMOND GC BRAND GEMINI GENERAL INSTRUMENTS HAMLIN JASCO JERROLD NOVAVISION OAK PANASONIC CABLE BOX BRAND SET LA S A S PRESS NUMBER KEY 0 9 THEN OK TO TEST PRESS MENU TO END 15 1 4 6 11 12 15 28 10 18 23 15 1 4 6 11 12 15 28 2 8 7 20 13 14 15 16 17 21 25 13 14 10 18 23 REMBRANDT 1 16 17 SAMSUNG SCIENTIFIC ATLANTA SIGMA 7 20 SL MARX 5 16 17 24 25 SPRUCER 13 14 STARGATE 5 15 16 17 21 24 25 TELEVIEW 5 16 24 TOCOM UNIKA UNIVERSAL VIDEOWAY ZENITH DBS RECEIVER BRAND CODE DBS RECEIVER BRAND CODE JVC DISH Network 51 SONY DSS 41 ECHOSTAR DISH 51 RCA DSS 40 Network For cable box CABLE BOX BRAND SET If the cable box s channel changes to 9 1 DID YOUR CABLE BOX setting is complete Press O
30. abuse accident alteration modification tampering negligence misuse faulty installation lack of reasonable care or if repaired or serviced by anyone other than a service facility authorized by JVC to render such service or if affixed to any attachment not provided with the products or if the model or serial number has been altered tampered with defaced or removed Initial installation and installation and removal for repair Operational adjustments covered in the Owner s Manual normal maintenance video and audio head cleaning Damage that occurs in shipment due to act of God and cosmetic damage Signal reception problems and failures due to line power surge Video Pick up Tubes CCD Image Sensor Cartridge Stylus Needle are covered for 90 days from the date of purchase Accessories Batteries except that Rechargeable Batteries are covered for 90 days from the date of purchase Oo ete eh There are no other express warranties except as listed above THE DURATION OF ANY IMPLIED WARRANTIES INCLUDING THE IMPLIED WARRANTY OF MERCHANTABILITY IS LIMITED TO THE DURATION OF THE EXPRESS WARRANTY HEREIN JVC SHALL NOT BE LIABLE FOR THE LOSS OF USE OF THE PRODUCT INCONVENIENCE LOSS OR ANY OTHER DAMAGES WHETHER DIRECT INCIDENTAL OR CONSEQUENTIAL INCLUDING WITHOUT LIMITATION DAMAGE TO TAPES RECORDS OR DISCS RESULTING FROM THE USE OF THIS PRODUCT OR ARISING OUT OF ANY BREACH OF THIS WARRANTY ALL EXPRESS AND IMPLIED WARRANTIES
31. atically El Press PROG on the Remote to access the PlusCode No screen F Press START once to access PROGRAM 1 Program screen START STOP Press START STOP DATE or CH repeatedly to enter the start time stop time date or channel PRESS SP EP 8 DAILY Press and hold START or STOP S WEEKLY THEN 0k to increase the time in 30 minute intervals To set the tape speed press SP EP To timer record daily Monday Friday or weekly serials press DAILY M F Number key 8 or WEEKLY Number key 9 Pressing the button again makes the DAILY or WEEKLY display disappear If you are using a DBS receiver and DBS RECEIVER SET is set to ON the band indication appears under the channel number indication Refer to Cable Box and or DBS Receiver Control Setting gt pg 7 TV To timer record a regular TV broadcast received on the VCR CATV To timer record a cable TV broadcast received on the VCR or through a cable box unless CABLE BOX SET is set to OFF DBS To timer record a satellite broadcast received through a DBS receiver If the channel number entered requires that the band be set and 7 DBS is displayed on the screen press DBS Number key 7 to select DBS Press OK or PROG If PROGRAM NOT COMPLETED PROGRAM OVERLAP appears see Program overlap warning display CF pg 14 Ej Press TIMER The
32. ating and maintenance servicing instructions in the literature accompanying the appliance WARNING TO PREVENT FIRE OR SHOCK HAZARD DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE CAUTION This video cassette recorder should be used with AC 120V5 60Hz only To prevent electric shocks and fire hazards DO NOT use any other power source CAUTION TO PREVENT ELECTRIC SHOCK MATCH WIDE BLADE OF PLUG TO WIDE SLOT FULLY INSERT ATTENTION POUR EVITER LES CHOCS ELECTRIQUES INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU AU FOND Note to CATV system installer This reminder is provided to call the CATV system installers attention to Article 820 40 of the NEC that provides guidelines for proper grounding and in particular specifies that the cable ground shall be connected to the grounding system of the building as close to the point of cable entry as practical NOTE Change or modifications not approved by the party responsible for compliance could void the user s authority to operate the equipment This equipment has been tested and found to comply with the limits for a Class B digital device pursuant toPart 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the ins
33. ay setting will be automatically reactivated If Plug amp Play setting is not performed though the antenna cable is connected correctly perform the procedure in Manual Clock Set C pg 6 and Auto Channel Set pg 7 or Manual Channel Set I pg 7 EJ Set VCR channel The VCR channel is the channel on which you can watch the picture from the VCR on the TV when only using the RF connection Press POWER I to turn off the VCR then press STOP EJECT W on the VCR for more than 5 seconds CH3 appears on the display panel Press CH on the Remote to select CH3 CH4 or CH OFF then press OK The VCR channel is preset to CH3 Set to CH4 if CH3 is used for broadcasting in your area EJ Final preparation for use Turn on the VCR and the TV and select the VCR channel 3 or 4 or AV mode on the TV You can now perform basic playback or basic recording If you connect the TV and the VCR only using the RF connection press TV VCR on the Remote so that the VCR mode indicator lights on the display panel ee Ef Select D S T mode Initial Settings Press OK or gt to move the highlight bar to D S T then press AV repeatedly until the desired setting is selected H AUTO Select if you want to adjust your VCR s clock Language Setting automatically by the incoming signal from the host The default setting is ENGLISH channel Auto Daylight Saving Time enables automat
34. connector to the audio output or input connector on another VCR To audio video output Example 2 When another VCR is S VHS VCR and when using this VCR as the playback VCR This VCR for playback To AUDIO OUT T t Tt To S VIDEO OUT o A F Audio cable not supplied S video cable supplied U To audio input J J To S video input Another VCR for recording Example 3 When another VCR is S VHS VCR and when using this VCR as the recording VCR This VCR for recording To AUDIO input t t t To S VIDEO input i i i Audio cable not supplied S video cable supplied U U To audio output J J J To S video output Another VCR for playback F Load cassettes Insert the playback cassette into the playback VCR and the cassette to be recorded on into the recording VCR E Select input mode on recording VCR Select the correct external input on the recording VCR On this VCR when using this VCR as the recording VCR Select L 1 when connecting the other VCR to the audio video or S video input connectors on the rear panel Select F 1 when connecting the other VCR to the audio video or S video input connectors on the front panel Press AUX or CH on the Remote Or push the JOG dial then turn it to the left or right EJ Select video input connector on recording VCR When using this VCR as the recording VCR select the appropriate mode depending on the conn
35. creen is shown you cannot use 24HR Quick Programing function Press MENU to return to normal screen and try again You can use 24HR Quick Programing function also when the VCR is turned off For 24HR Quick Programing function the program overlap warning display does not appear even if some programs overlap each other To use the VCR while it is in timer recording standby mode Press TIMER then press POWER After you use the VCR press TIMER again to put the VCR into timer recording standby mode Checking canceling or changing program settings ET Disengage timer Press TIMER then press POWER 0 1 When AUTO TIMER is set to ON lt pg 15 you do not have to press TIMER FPA Access Program Check screen Press PROG CHECK Access Program screen Press PROG CHECK again Each time you press PROG CHECK the next program s Program screen appears EJ Cancel or change program setting To cancel a program press CANCEL when the Program screen you do not want is shown To change a program press the appropriate button START STOP DATE CH DAILY M F Number key 8 WEEKLY Number key 9 and or SP EP when the Program screen on which you want to make changes is shown EJ Return to normal screen Press PROG CHECK repeatedly until no Program screen is shown EJ Reengage timer recording standby mode Press TIMER The VCR turns off automatically and is disp
36. d servicing ATTENTION Follow and obey all warnings and instructions marked on your product and its operating instructions For your safety please read all the safety and operating instructions before you operate this product and keep this booklet for future reference INSTALLATION 1 Grounding or Polarization A Your product may be equipped with a polarized alternating current line plug a plug having one blade wider than the other This plug will fit into the power outlet only one way This is a safety feature If you are unable to insert the plug fully into the outlet try reversing the plug If the plug should still fail to fit contact your electrician to replace your obsolete outlet Do not defeat the safety purpose of the polarized plug B Your product may be equipped with a 3 wire grounding type plug a plug having a third grounding pin This plug will only fit into a grounding type power outlet This is a safety feature If you are unable to insert the plug into the outlet contact your electrician to replace your obsolete outlet Do not defeat the safety purpose of the grounding type plug 2 Power Sources Operate your product only from the type of power source indicated on the marking label If you are not sure of the type of power supply to your home consult your product dealer or local power company If your product is intended to operate from battery power or other sources refer to the operating instructions
37. e This will ensure that you can record one show while watching another E1 Perform Plug amp Play setup Plug the AC power cord into an AC outlet Do not turn on the VCR The clock and tuner channels will be set automatically The time and date can be set automatically by the clock setting data transmitted from one of the regular TV broadcast channels We call this TV channel the host channel and it is a PBS channel in your area ATTENTION If you use a cable box Plug amp Play will not function set the clock and tuner channels separately I pg 6 7 Depending on areas or reception conditions the VCR may not receive the Auto clock setting data from a PBS channel If this function is taking a considerable amount of time it may be necessary to perform the procedure in Semiauto Clock Set C pg 6 or Manual Clock Set pg 6 S Ma During Initial Auto Clock Set Aut blinks During Auto Channel Set The channel numbers are displayed as they are scanned and set Plug amp Play Completed The current time is displayed What to do if Plug amp Play setting failed If an incorrect time is displayed on the display panel perform the procedure in Semiauto Clock Set pg 6 or Manual Clock Set F pg 6 f appears on the display panel ensure that the antenna cable is connected correctly Then turn on and off the VCR the Plug amp Pl
38. ector being used lt gt pg 16 When using S VIDEO input connector on the front panel set FRONT AUX INPUT to S VIDEO When using S VIDEO IN connector on the rear panel set REAR AUX INPUT to S VIDEO When using VIDEO input connector on the front panel set FRONT AUX INPUT to VIDEO When using VIDEO IN connector on the rear panel set REAR AUX INPUT to VIDEO EJ Select edit mode Set the edit mode to ON for the VCRs if such a mode is equipped On this VCR set PICTURE CONTROL to EDIT CF pg 15 EJ Start playback Press PLAY B on the playback VCR Start recording Press REC on the recording VCR CONTINUED ON NEXT PAGE on PO Various connection for editing tapes The following three methods can be used for editing tapes VHS to S VHS editing VIDEO VIDEO connection Although the picture quality is inherently limited by the original VHS quality the edited tape has better picture quality than those made by VHS to VHS editing e S VHS to VHS editing VIDEO VIDEO connection Since the original source is recorded in S VHS mode the edited tape has better picture quality than those made by VHS to VHS editing S VHS to S VHS S VIDEO connection Original picture quality of S VHS made can be duplicated with minimal picture degradation This is the best editing method you can use on S VHS VCRs Audio Dubbing Audio Dubbing replaces the normal aud
39. en monitoring the sound during Audio Dubbing the normal soundtrack is automatically selected If you wish to hear the Hi Fi or mixed sound Hi Fi normal soundtracks press A MONITOR to select NORM HI FI pg 9 Selecting monitor sound Audio Dubbing stops automatically when the counter reaches 0 00 00 and the VCR enters the Play mode Check the counter reading on the screen before dubbing Audio Dubbing is not possible with a cassette whose record safety tab has been removed When playing back an audio dubbed tape press AAMONITOR to select the soundtrack you wish to hear pg 9 Selecting monitor sound Insert Editing and AV Dubbing Insert Editing You can replace a recorded scene with new scene recorded on another tape or with other material Both the picture and the sound recorded on the Hi Fi sound track are replaced at the same time AV Dubbing You can perform Audio Dubbing and Insert Editing at the same time This means that the picture and the sounds recorded on the Hi Fi sound track and on the normal track are replaced at the same time For AV Dubbing you can edit pictures and sound using different sources connect a video source to the video input connector and an audio source to the audio input connectors EE Make connections Connect an audio video cable between the VCR s audio video input connectors and the other component s audio video output connectors Insert
40. ess PLAY gt then press PAUSE IB when you find the end of the scene for which you want to edit Press C RESET so that the counter reading becomes 0 00 00 EJ Locate start point and engage Insert Editing mode Press REW lt lt then press PAUSE I when you find the beginning of the scene for which you want to edit then press INSERT The VCR enters the Insert Editing Pause mode O and gt light on the display panel If you want to perform AV Dubbing and replace the picture Hi Fi audio soundtrack and normal audio soundtrack all at the same time after you press INSERT press A DUB also Start editing Load the source cassette and engage the Play mode of the other component then press PLAY on the VCR Insert Editing begins at this point Insert Editing stops automatically when the counter reaches 0 00 00 and the VCR enters the Play mode To stop editing any time during recording Press STOP W on the Remote or STOP EJECT Mi 4 on the VCR then engage the Stop mode of the other component NOTES Be sure to select AUTO for PICTURE CONTROL or NORM when VIDEO CALIBRATION is set to OFF after you finish editing F pg 15 Editing is not possible with a cassette whose record safety tab has been removed The recording speed SP EP is determined by the previous recording to be replaced If the recording speed changes on the tape to be edited
41. et automatically f the cassette s record safety tab has been removed playback begins automatically PA Start playback Press PLAY P gt The S VHS indicator lights up when you play back a tape recorded in S VHS mode or in S VHS ET mode pg 11 During playback Stop playback Press STOP W on the OR Press STOP EJECT W on Remote the VCR Pause playback and view still picture Press PAUSE ED OR Push the JOG dial Press PLAY P gt to resume Push the JOG dial again to normal playback resume normal playback NOTE During still picture vertical vibration may appear on the TV screen Press CH on the Remote to get a clearer picture Pause and Frame by Frame playback Press PAUSE If to pause then press kad or Pl or PAUSE Il repeatedly Press PLAY P gt to resume normal playback OR Push the JOG dial to pause then turn the JOG dial to the left or right Push the JOG dial again to resume normal playback High Speed Picture Search Press REW Ed or FF PP Press PLAY P to resume normal playback If you press and hold REW lt lt or FF gt for more than 2 seconds simply releasing it cancels the picture search and normal playback resumes OR Turn the JOG dial quickly to the left or right Variable Speed Picture Search including slow motion Press kad or P OR Turn the JOG dial to the left repeatedly or right Press PLAY P to resume
42. i Fi track and normal track are mixed and played back NOTES While playing back a monaural tape sounds on the normal track will be heard regardless of this setting If RF connection pg 5 is used for viewing pictures on the TV sound will be monaural even though you select HI FI You can also use the AAMONITOR button on the Remote to select the desired monitor sound pg 9 E S VHS MODE ON OFF You can determine which recording mode either S VHS mode or VHS mode is used for recording on S VHS tapes When this function is set to ON you can record on S VHS tapes with S VHS picture quality When this function is set to OFF you can record on S VHS tapes with VHS picture quality NOTES S VHS mode allows you to make high quality video recordings with horizontal resolution of 400 lines comparing with the 230 lines of resolution of conventional VHS recordings To achieve the highest quality picture we recommended to record in S VHS mode But remember that a conventional VHS VCR without SQPB cannot play back S VHS tapes recorded in S VHS mode S VHS MODE setting does not affect recording on VHS tapes Recording on VHS tapes is always performed in VHS mode except when using S VHS ET mode F pg 15 WE AV COMPU LINK ON OFF The remote PAUSE AV COMPULINK terminal on the rear panel can be used as either the remote PAUSE terminal or the AV COMPULINK terminal When this func
43. ic adjustment of the VCR s clock at the start and end of Turn on the VCR and TV and select the VCR channel or AV Daylight Saving Time Be sure to select the correct time mode zone manually in step B eas ON Adjustment will be made by the built in clock itself E Access Main Menu screen then Initial iia OFF Select when Daylight Saving Time does not apply to you Set screen FUNCTION SET TUNER SET Press MENU on the Remote Press AV to EA Select n an ee move the highlight bar arrow to INITIAL Press OK or gt to move the highlight bar to TIME ZONE then SET then press OK or PRESS THEN OK press AV repeatedly until AUTO or the desired time zone is PRESS MENU TO END selected Each time you press the button the time zone changes as 2 Select language Ha gt AUTO lt gt ATLANTIC EASTERN CENTRAL This VCR offers you the language choice to GLOCK SET lt gt MOUNTAIN lt gt PACIFIC lt gt ALASKA lt gt HAWAII view menus and some messages in eRe aoe lt gt back to the beginning English Spanish or French Press AV to He ECPE EEL DBS RECEIVER SET move the highlight bar arrow to _ El Complete Semiauto Clock Set LANGUAGE then press OK or gt PRESS MENU TO END Press MENU to return to normal screen Turn off the VCR Aut repeatedly until the desired language is will appear on the display panel while the clock is being set The selected current clock time wi
44. io sound of a previously recorded tape with a new soundtrack EF Make connections Connect an audio cable between the VCR s audio input connectors and the audio component s audio output connectors When connecting a monaural audio component use only the VCR s AUDIO L input connector Audio Dubbing is possible by using the audio input connectors on the front panel or on the rear panel This VCR To AUDIO input f f To AUDIO output CD player etc FA Select input mode Select F 1 when connecting the audio component to the audio input connectors on the front panel Select L 1 when connecting the audio component to the audio input connectors on the rear panel Press AUX or CH on the Remote Or push the JOG dial then turn it to the left or right EJ Locate start point and engage Audio Dubbing mode Load a cassette and press PLAY on the VCR Press PAUSE II at the point where you want to start dubbing then press A DUB The VCR enters the Audio Dubbing Pause mode O blinks and lights on the display panel E1 Start dubbing Engage the Play mode of the audio component then press PLAY on the VCR Audio Dubbing begins at this point To pause dubbing press PAUSE HI Press PLAY B gt to resume dubbing E End Audio Dubbing Press STOP W on the Remote or STOP EJECT W amp on the VCR then engage the Stop mode of the audio component NOTES Wh
45. is function to OFF otherwise the VCR status information on screen display will be recorded on the edited tape WE AUTO SP EP TIMER ON OFF When this function is set to ON the VCR automatically switches to EP mode to allow complete recording if there is not enough tape to record the entire program while timer recording in SP mode For Example Recording a program of 140 minutes in length onto a 120 minute tape Approximately 110 minutes Approximately 30 minutes SP mode EP mode NOTES f you have programed the VCR to timer record 2 or more programs do not use this function but change the tape speed manually during timer programing There may be some noise and sound disturbance where the tape speed switches from SP to EP mode on the tape This function is not available during ITR Instant Timer Recording and will not work properly on the following tapes T ST 30 T ST 60 T ST 90 and T ST 120 WE VIDEO STABILIZER ON OFF When this function is set to ON you can automatically correct vertical vibrations in the picture when playing back unstable recordings made on another VCR NOTE To watch recordings with close caption or when you finish viewing a tape set this function to OFF W BLUE BACK ON OFF When this function is set to ON the TV screen becomes all blue when receiving a channel not in use NOTE When you want to receive an unstable channel with po
46. layed on the display panel When AUTO TIMER is set to ON lt pg 15 the timer recording standby mode automatically resumes when you turn off the VCR PR START STOP CH P 10 00 12 PRESS CHECK TO NEXT CONTINUED ON NEXT PAGE a e en Program overlap warning display If PROGRAM NOT COMPLETED PROGRAM OVERLAP appears you have another program overlapping the program you have just made The Program Check screen appears and conflicting programs will start blinking PR START STOP CH _ DATE 1 _8 00P 10 00 12 10 00A 10 45 40 11 30P 1 00 125 9 00P 10 00 10 12 24 PROGRAM NOT COMPLETED 2 3 PROGRAM OVERLAP 6 7 8 4 THEN PROG END Example Program 1 you have just made and Program 4 overlap each other EE Select program to modify Press AV then press OK or You can only select one of the overlapping programs If you do not mind this overlap press PROG to finish the timer program setting The program starting earlier or program with the lower program number will be recorded BA Cancel or change program setting a v THEN p gt PROG END PROGRAM 4 To cancel a program press CANCEL when START STOP 9 00PM gt 10 00PM the Program screen you do not want is DATE CH 12 24 03 10 SP 2 Ww PRESS CANCEL TO CANCEL PRESS 0K TO CONFIRM PRESS PROG TO END shown To change a program press the appropriate button START STOP DATE
47. ll appear automatically when the clock Press MENU to return to normal screen setting is complete Language selection will be reset to ENGLISH after a power rahe ae P Selections of host channel and D S T mode will be reset to AUTO after a power failure occurs Clock Setting Perform clock setting only if the clock has not been set correctly Setting dock manually by the Plug amp Play setting or if you use a cable box Manual Clock Set First follow steps fl to F in Preparations above then go to the Turn on the VCR and TV and select the VCR channel or AV following steps mode ET Set time date and year CLOCK SET Preparations Press AV until the desired time appears Weer eel 1 then press OK or Set the date and year AUTO CLOCK ON EF Access Main Menu screen then Initial MAIN MENU in the same way DST aulo COV Set screen EUNCHIONSET Holding AV changes the time in 30 ESTAS ane Te TUNER SET j j hanges the date in PRESS MENU TO END minute interva s or Chang Press MENU on the Remote Press AV to 15 day intervals move the highlight bar arrow to INITIAL SET then press OK or gt PRESS a v THEN OK 2 Select D S T mode CLOCK SET SS 0 aki PRESS MENU TO END Press OK or gt to move the highlight bar to TIME DATE FA Access Clock Set screen INITIAL SET D S T then press AV to select the AUTO CLOCK OFF Press AV to move the highlight bar desired setting D S T ONG arr
48. ls do not transmit clock setting data CONTINUED ON NEXT PAGE Tuner Setting Turn on the VCR and TV and select the VCR channel or AV mode Setting channels automatically Auto Channel Set Perform Auto Channel Set only if channels have not been set correctly by the Plug amp Play setting EE Access Main Menu screen then Tuner Set screen Press MENU on the Remote Press AV to move the highlight bar arrow to TUNER SET then press OK or gt FJ Perform Auto Channel Set Press V to move the highlight bar arrow to AUTO CHANNEL SET then press OK or The VCR selects the correct band TV or CATV automatically during Auto Channel Set When Auto Channel Set is complete SCAN COMPLETED appears on screen f the scan was unsuccessful SCAN COMPLETED NO SIGNAL appears on screen Check the connections and start again Press MENU to return to normal screen MAIN MENU FUNCTION SET TUNER SET INITIAL SET PRESS 4 THEN OK PRESS MENU TO END TUNER SET BAND CATV AUTO CHANNEL SET MANUAL CHANNEL SET SELECT WITH 4 AND OK PRESS MENU TO END AUTO CHANNEL SET SCANNING PRESS MENU TO END Setting channels manually Manual Channel Set You can add the channels you want or delete the channels you do not want manually MAIN MENU FUNCTION SET gt TUNER SET INITIAL SET EE Access Main Menu screen then Tuner Set screen Press MENU on the
49. may result in fire electric shock or other hazards 4 Safety Check Upon completion of any service or repairs to this product ask the service technician to perform safety checks to determine that the product is in safe operating condition How to use the Remote Before use insert two AA size batteries into the Remote with the polarity and matched correctly as indicated on the battery compartment or on the lid The Remote can operate most of your VCR s functions as well as basic functions of TV sets cable boxes and DBS receivers Point the Remote toward the remote sensor on the target component The maximum operating distance of the Remote is about 8 m NOTE If the Remote does not work properly remove its batteries wait for a few seconds replace the batteries and then try again Video heads cleaning The heads get dirty in the following cases in an environment prone to extreme temperature or humidity in a dusty environment flaw dirt or mold on video tapes continuous usage for a long time Use a dry cleaning cassette TCL 2 when Rough poor picture appears while a tape is played back The picture is unclear or no picture appears USE CLEANING CASSETTE appears on the screen only with SUPERIMPOSE set to ON pg 15 ATTENTION To mobile phone users Using a mobile phone in the vicinity of the VCR may cause picture vibration on the TV screen or change the
50. me you press the button recording length increases in 30 minute intervals up to 6 hours The VCR shuts off after recording is finished To cancel an ITR press STOP W on the Remote or STOP EJECT H 4 on the VCR Watching one program while recording another During recording If you connect the TV and the VCR only using the RF connection pg 5 to view pictures from the VCR press TV VCR on the Remote so that VCR mode indicator goes off from the display panel The TV broadcast being recorded disappears If you are using the AV connection CF pg 5 to view pictures from the VCR change the TV s input mode from AV to TV Then select the channel you want to watch on the TV Second Audio Recording This VCR s built in MTS decoder enables reception of Multichannel TV Sound broadcast To record a SAP program received set 2ND AUDIO RECORD to ON F pg 15 S VHS Super VHS S VHS ET or VHS Recording Mode This VCR can record in S VHS Super VHS S VHS ET or VHS To record in S VHS Set S VHS MODE to ON CF pg 16 Then insert a cassette marked S VHS The S VHS indicator lights up on the display anel The S VHS recording mode is selected To record in S VHS ET on a VHS cassette Set S VHS ET to ON CF pg 15 Then insert a cassette marked VHS The S VHS indicator lights up on the display panel To record in VHS Insert a cassette marked VHS
51. o automatically switch the cable box or DBS receiver s channel during timer recording NOTES The Controller is not supplied with this unit It can be requested by mailing in the completed JVC Cable Mouse Certificate that is included with the accessory package For the cable box the Controller is effective for VCR Plus or Express timer programing For the DBS receiver the Controller is effective only for Express timer programing When connecting your cable box or DBS receiver refer to its instruction manual Turn on the VCR and TV and select the VCR channel or AV mode E Situate Controller If both a cable box and a DBS receiver are used position the Controller so its signal reaches the remote sensors on both the cable box and DBS receiver FA Attach Controller Fix securely using the adhesive strip attached on the back of the Controller Cable box or DBS receiver Controller suggested locations RF out Audio video output Transmitter Controller To ANT IN To AUDIO VIDEO IN f your cable box or DBS receiver does not have audio video output connectors connect the RF output terminal on the unit to the ANT IN terminal on the rear of your VCR f your cable box or DBS receiver has audio video output connectors connect an audio video cable between the AUDIO VIDEO IN connectors on the rear of the VCR and the audio video output connectors on the unit If both a cable box and a D
52. ombination A product and cart combination should be moved with care Quick stops excessive force and uneven surfaces may cause the product and cart combination to overturn 3 Water and Moisture Do not use this product near water for example near a bath tub wash bowl kitchen sink or laundry tub in a wet basement or near a swimming pool and the like 4 Object and Liquid Entry Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock Never spill liquid of any kind on the product 5 Attachments Do not use attachments not recommended by the manufacturer of this product as they may cause hazards 6 Cleaning Unplug this product from the wall outlet before cleaning Do not use liquid cleaners or aerosol cleaners Use a damp cloth for cleaning 7 Heat The product should be situated away from heat sources such as radiators heat registers stoves or other products including amplifiers that produce heat EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELECTRICAL CODE ANSI NFPA 70 ANTENNA LEAD IN WIRE ANTENNA DISCHARGE UNIT NEC SECTION ELECTRIC SERVICE 810 20 EQUIPMENT A GROUNDING CONDUCTORS NEC SECTION 810 21 GROUND CLAMPS POWER SERVICE GROUNDING ELECTRODE SYSTEM NEC ART 250 PART H NEC NATIONAL ELECTRICAL CODE PORTABLE CART WARNING Symbol provided by RETAC
53. ooms On screen display If you press OSD OK on the Remote when SUPERIMPOSE is set to ON pg 15 you can see the current VCR status on the TV screen The indications are not recorded even if the VCR is in the recording mode Channel and VCR operation auxiliary input Timer warning display mode anae I anan Day and liz RECORD clock time ETHU 12 00 AM PAUSE i Lape Spee STEREO y STEREO WARNING C0 SP pe sp SAP TIMER RECORDING program TO START SOON Cassette mark indication aed CANCEL SAP eee eee ss ne Tape position indication udo f NORM REMAIN r oT 1 Index number monitor HI FI COUNT 1 23 45 Tape incieation s p remaining time Time counter To recall an indication Press OSD OK All indications corresponding to the current status are displayed for 5 seconds After that the counter information and RECORD PAUSE if in the Record Pause mode remain on the TV screen Press OSD OK again to clear the display The RECORD PAUSE indication remains on the TV screen Connections and Plug amp Play Setting EE Check contents Make sure the package contains all of the accessories listed in Specifications F pg 20 FJ Situate VCR Place the VCR on a stable horizontal surface Connect VCR to TV Antenna or cable i Coaxial cable aui Flat feeder h Matching transformer not supplied AC
54. or signals set this function to OFF 2ND AUDIO RECORD ON OFF When this function is set to ON If a SAP program is received the SAP audio is recorded on both the normal and Hi Fi tracks The main audio is not recorded If a non SAP program is received the main audio is recorded on both the Hi Fi and normal tracks When this function is set to OFF the SAP audio cannot be recorded NOTE When the channel is changed on the VCR The STEREO indication appears on the screen for about 5 seconds if the program is a stereo broadcast The SAP indication appears on the screen for about 5 seconds if the program is a SAP broadcast Both indications appear when a stereo program is accompanied by SAP sound CONTINUED ON NEXT PAGE saa AUDIO MONITOR HI FI HI FI L HI Fl R NORM MIX This VCR can record two sound tracks simultaneously normal and Hi Fi on a Hi Fi stereo tape You can select the sound track s to listen to while playing back a Hi Fi stereo tape In addition when playing back a prerecorded tape containing two separate audio programs on the Hi Fi tracks you can choose either one by selecting either HI FI L or HI FI R HI FI Normally select this Hi Fi sound is played back HI FI L Sound on the left Hi Fi channel is played back HI FI R Sound on the right Hi Fi channel is played back NORM Sound on the normal track is played back MIX Both sounds on the H
55. ow to CLOCK SET then press OK or GUIDECHANNEL SER S ON Adjustment will be made by the RES ENTR CABLE BOX SET built in clock itself PRESS MENU TO END DBS RECEIVER SET i oe OFF Select when Daylight Saving Time SELECT WITH 4 AND OK PRESS MENU TO END does not apply to you Setting clock semiautomatically El Start clock _ Semiauto Clock Set Press MENU and normal screen appears You can change the host channel D S T Daylight Saving Time time zone setting manually First follow steps Hl to A in To make corrections any time during the process Press OK or gt repeatedly until the item you want to change Preparations above then go to the following steps blinks then press AV NOTE The time set previously will be erased when AUTO CLOCK Manual setting of the clock will be lost after a power failure HOST CH D S T or TIME ZONE setting is changed occurs E Set Auto Clock to ON CLOCK SET Press OK or on the Remote repeatedly to TIME am CATE YEAR move the highlight bar to AUTO CLOCK then press AV so that ON is selected ORIY D S T TIME ZONE AUTO PRESS MENU TO END FA Select host channel You can either select AUTO or enter a PBS channel number Press OK or gt to move the highlight bar to HOST CH then press AV repeatedly until AUTO or the desired PBS channel number is selected PBS ch l it clock i Some PBS channe
56. place the batteries TV Brand Setting EE Turn on TV Turn on the TV using the Power button on the TV or its Remote FJ Set TV brand code Press and hold TV Press MBR SET Press the Number keys to enter your TV s brand code Press OK and release TV The TV should turn off EJ Operate TV While holding down TV press one of the following buttons POWER O I TV VCR TV CH I TV Muting TV VOL and the Number keys For some brands you must press ENTER after having pressed the Number keys to enter a channel number TV BRAND CODE TV BRAND CODE 07 JVC SONY HITACHI MAGNAVOX SAMSUNG SANYO MITSUBISHI SEARS PANASONIC TOSHIBA ZENITH Cable Box or DBS Receiver Brand Setting Turn on the VCR and TV and select the VCR channel or AV mode EF Turn on cable box or DBS receiver Turn on the cable box or DBS receiver using the Power button on the unit or its Remote FA Enter brand code 1 Press and hold CABLE DBS 2 Press MBR SET 3 Press the Number keys to enter your cable box s or DBS receiver s brand code 4 Press OK and release CABLE DBS EJ Operate cable box or DBS receiver While holding down CABLE DBS press one of the following buttons POWER TV CH and the Number keys For some brands you must press ENTER after having pressed the Number keys to enter a channel number To change the cable box s or DBS receiver s channels press TV CH or the Number key
57. power cord Back of VCR AC outlet To audio video input connectors Audio video cable not supplied To 75 Q terminal O Ei To S video input connector RF cable supplied S video cable supplied RF Connection 1 Disconnect the TV antenna from the TV 2 Connect the TV antenna cable to the ANT IN terminal on the rear of the VCR 3 Connect the supplied RF cable between the TV OUT terminal on the rear of the VCR and the TV s antenna input terminal AV Connection improves picture quality during tape playback If your TV is equipped with audio video input connectors 2 Connect an audio video cable between the AUDIO VIDEO OUT connectors on the rear of the VCR and the audio video input connectors on the TV 1 Connect the antenna VCR and TV as shown in the illustration S video Connection allows you to make the most of the S VHS picture performance If your TV is equipped with a S video input connector 1 Perform RF Connection previously described 2 Connect the supplied S video cable between the S VIDEO OUT connector on the rear of the VCR and the S video input connector on the TV 3 Connect an audio cable between the AUDIO OUT connectors on the rear of the VCR and the audio input connectors on the TV Even if you are using audio video cables to connect your VCR to your TV you must also connect it using the RF cabl
58. ress REC After about 7 seconds the VCR re enters Record Pause mode Press PLAY B gt to start recording E PICTURE CONTROL AUTO NORM EDIT SOFT SHARP This function helps you to adjust the playback picture quality according to your preference AUTO NORM Normally select this Picture quality is adjusted automatically When VIDEO CALIBRATION is OFF NORM will appear instead of AUTO EDIT Minimizes picture degradation during editing recording and playback SOFT Reduces image coarseness when viewing overplayed tapes containing much noise SHARP Clearer sharper edged picture when viewing images with much flat same colored surfaces such as cartoons NOTE Select EDIT when you are editing tapes After you finish editing the tapes select AUTO WE AUTO TIMER ON OFF When this function is set to ON The timer recording standby mode is automatically engaged when the VCR is turned off It is temporarily canceled when the VCR is turned on You do not have to press TIMER to engage or disengage the timer recording standby mode When this function is set to OFF You have to press TIMER to engage or disengage the timer recording standby mode Mi SUPERIMPOSE ON OFF When this function is set to ON various VCR status information on screen display appears on the screen NOTE When you use this VCR as the playback VCR for editing a tape be sure to set th
59. rogram of 2 to 9 index codes away from the current position on the tape If for example you have 5 programs recorded and you want to watch the third one press REVIEW three times The Instant Review function will also operate if the VCR is turned on Skipping unwanted portions Skip Search Press SKIP SEARCH on the Remote once to 4 times during playback Each press initiates a 30 second period of high speed playback up to 2 minutes When the specified portion of the tape is skipped normal playback resumes automatically To return to normal playback during Skip Search press PLAY B gt 10 i Recording It may be unlawful to record or play back copyrighted material without the consent of the copyright owner Record safety tab Accidental erasure prevention To prevent accidental recording on a recorded cassette remove its record safety tab To record on it later cover the hole with adhesive tape Basic Recording Turn on the VCR and TV and select the VCR channel or AV mode EF Load a cassette Make sure the record safety tab is intact If not cover the hole with adhesive tape before inserting the cassette The VCR turns on and the counter on the on screen display is reset automatically FA Select recording channel Press CH or the Number keys on the Remote Or push the JOG dial then turn it to the left or right If you connect the TV and the VCR only using the RF connection F pg
60. s The CH button can be used to change the VCR s channels only CABLE BOX BRAND ARCHER CABLETENNA CABLEVIEW CITIZEN CURTIS DIAMOND GC BRAND GEMINI GENERAL INSTRUMENTS HAMLIN JASCO JERROLD NOVAVISION OAK PANASONIC PULSER RCA REGAL REMBRANDT SAMSUNG SCIENTIFIC ATLANTA SIGMA SL MARX SPRUCER STARGATE 01 05 17 01 17 15 16 17 21 25 15 16 17 21 25 02 01 17 15 16 17 21 25 15 01 04 06 11 12 15 28 10 18 23 15 01 04 06 11 12 15 28 05 16 17 24 25 13 14 05 15 16 17 21 24 25 TELEVIEW TOCOM UNIKA UNIVERSAL VIDEOWAY ZENITH 05 16 24 JVC DISH Network ECHOSTAR DISH Network SONY DSS RCA DSS Changing Remote Control Code This Remote is capable of transmitting two control codes one set to respond to A code control signals and another set to respond to B code control signals This Remote control is preset to send A code signals because your VCR is initially set to respond to A code signals You can easily modify your VCR and the Remote to respond to B code signals When using two JVC VCRs set two VCRs and their Remotes to different codes so that you can operate these VCRs separately ET Set remote control code for Remote Press and hold A B Press the Number key 2 Press OK and release A B The Remote now can transmit B code control signals FA Check remote control code for VCR Press and hold on the VCR for more
61. screen to a blue back display On placing the VCR Some TVs generate strong magnetic fields Make sure to place the VCR at least 20 cm 7 or 8 inch away from a TV DO NOT place the VCR close to a TV as it may cause noise picture disturbance or malfunctions power off etc to occur Buttons Connectors and Indicators Front Panel 24HR QUICK INSERT PROGRAM Cassette loading slot REC LINK Advanced JOG dial POWER 4v1 S VIDEO VIDEO AUDIO input input Connectors connector sensor REC PLAY Display panel Timer mode indicator Play indicator indicator Record indicator Channel and auxiliary input Clock time Rear Panel CABLE BOX ANT IN AC power cord S VIDEO IN S VIDEO OUT AUDIO VIDEO IN AUDIO VIDEO OUT TV OUT PAUSE AV COMPULINK Remote CABLE DBS MBR SET A B TV ka POWER TV VCR A MONITOR cick REVIEW Sl DISPLAY DAILY M F ais AUX cancel US TIMER C RESET STOP START Jee DATE eea SKIP SEARCH lt c PROG p ml L PROG CHECK We SP EP rew Ee p D JEn PLAY E le alee STOP me PAUSE MENU LZ SHUTTLE y I gt ENTER OSD Ni SHUTTLE PLUS eee SHUTTLE PLUS TV CH lt 1 lt lt gt gt TV VOL The glow in the dark buttons shown in white on the illustration above are helpful when using the Remote in darkened r
62. t If automatic tracking cannot eliminate noises well during playback follow the procedures below On the Remote E Press SP EP during playback to activate manual tracking BA Press CH to eliminate the noises Press it briefly for a fine adjustment or press and hold for a coarse adjustment Press SP EP again to reactivate automatic tracking Selecting monitor sound Audio Monitor While playing back a tape on which stereo sound or SAP sound is recorded press AMONITOR on the Remote Each time you press the button sound changes HI FI Normally select this Hi Fi sound is played back HI FI L Sound on the left Hi Fi channel is played back HI FI R Sound on the right Hi Fi channel is played back NORM Sound on the normal track is played back NORM HI FI Both sounds on the Hi Fi track and normal track are mixed and played back NOTE The above indication appears when SUPERIMPOSE is set to ON CF pg 15 though the monitor sound changes in sequence CONTINUED ON NEXT PAGE Automatic operations after rewinding Next Function Memory The Next Function Memory tells the VCR what to do after rewinding is complete Ensure that the VCR is in stop mode For Automatic Playback Start Press REW Ed then press PLAY P within 2 seconds For Automatic Power Off Press REW Ed then press POWER within 2 seconds For Automatic Timer Standby Press REW lt lt then press TIMER within
63. t when the power is supplied again to this VCR after the power failure this VCR starts the Plug amp Play setting automatically to restore the clock time and channel setting If the clock time and channel setting are restored correctly each timer program you have made will start at its start time unless its end time has elapsed f the tape reaches its end during timer recording the recording stops and O and on the display panel blink Press TIMER to disengage timer then press STOP EJECT on the VCR to eject the cassette or press POWER O I then press REW lt lt 4 on the Remote to rewind the tape Changing VCR Plus Setting The VCR Plus programing system assigns a VCR Plus guide channel to the TV channels and the cable channels These guide channel numbers are also called the VCR Plus channel codes Most TV listings have a section usually a chart indicating the guide channel numbers assigned to each station To ensure that VCR Plus timer recording operates correctly it is necessary to set the VCR Plus Guide Channel Set for each station If you have moved to a different area or if a broadcasting station s channel number has been changed perform the following steps to set the correct guide channel number EE Access Main Menu screen then Initial Set screen Press MENU on the Remote Press AV to move the highlight bar arrow to INITIAL SET then press OK or gt PA Access Guide
64. t authorized servicer or visit our website at www JVC com Remember to retain your Bill of Sale for Warranty Service JVC JVC SERVICE amp ENGINEERING COMPANY OF AMERICA DIVISION OF JVC AMERICAS CORP Sophisticated electronic products may require occasional service Just as quality is a keyword in the engineering and production of the wide array of JVC products service is the key to maintaining the high level performance for which JVC is world famous The JVC service and engineering organization stands behind our products NATIONAL HEADQUARTERS JVC SERVICE amp ENGINEERING COMPANY OF AMERICA DIVISION OF JVC AMERICAS CORP 10 New Maple Avenue Pine Brook NJ 07058 9641 ACCESSORIES Don t service the product yourself To purchase accessories for your JVC product you may contact your local JVC Dealer CAUTION To prevent electrical shock do not open the cabinet From the 48 Continental United States call toll free 1 800 832 2345 or on the web at www JVC com There are no user serviceable parts inside Please refer to qualified service personnel for repairs ee WARRANTY Only in U S A LIMITED WARRANTYCcoNSUMER VIDEO 1 90 JVC COMPANY OF AMERICA warrants this product and all parts thereof except as set forth below ONLY TO THE ORIGINAL PURCHASER AT RETAIL to be FREE FROM DEFECTIVE MATERIALS AND WORKMANSHIP from the date of original retail purchase for the period as shown below The Warranty Period
65. tion is set to ON you can use this terminal as the AV COMPULINK terminal By connecting other JVC s AV COMPULINK components including amplifiers or receivers and televisions one touch control of the audio and video components linked via their AV COMPULINK connectors becomes possible When this function is set to OFF you can use this terminal as the remote PAUSE terminal If your JVC camcorder is equipped with the Master Edit Control you can control the VCR from the camcorder Connect the mini plug cable not supplied with this VCR between the remote PAUSE terminal and the EDIT connector on the camcorder NOTE Refer to the other components instruction manuals for connection and its operations li FRONT AUX INPUT VIDEO S VIDEO You have to select which terminal either VIDEO composite or S VIDEO Y C separate signals to use as the video input terminal on the front panel Make sure to select the correct terminal otherwise you may fail in recording editing on this VCR Mi REAR AUX INPUT VIDEO S VIDEO You have to select which terminal either VIDEO composite or S VIDEO Y C separate signals to use as the video input terminal on the rear panel Make sure you select the correct terminal otherwise you may fail in recording editing on this VCR Satellite Auto Recording You can automatically record a satellite program which is timer programed on your DBS receiver Turn on the VCR and
66. tructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help Declaration of Conformity Model Number HR S5902 5912U Trade Name JVC Responsible Party Address JVC Americas Corp 1700 Valley Road Wayne N J 07470 Telephone Number 973 317 5000 This device complies with Part 15 of FCC Rules Operation is subject to the following two conditions 1 This device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation Failure to heed the following precautions may result in damage to the VCR Remote or video cassette 1 DO NOT place the VCR 1N an environment prone to extreme temperatures or humidity in direct sunlight in a dusty environment in an environment where strong magnetic fields are generated
67. while editing the tape the inserted picture will be distorted where the recording speed changes When you edit a tape a small portion of the recording preceding to the editing start point will be erased from the edited tape l Specifications GENERAL Power requirement Power consumption AC 120 V 60 Hz Power on 16W Power off 1 5 W Temperature Operating 5 C to 40 C 41 F to 104 F 20 C to 60 C 4 F to140 F Horizontal only 435 mm x 94 mm x 242 mm 17 3 16 x 3 3 4 x 9 3 4 Storage Operating position Dimensions WxHxD Weight 2 7 kg 5 9 Ibs Format S VHS VHS NTSC standard Maximum recording time SP 210 min with ST 210 video cassette EP 630 min with ST 210 video cassette VIDEO AUDIO Signal system NTSC type color signal and EIA monochrome signal 525 lines 60 fields DA 4 Double Azimuth head helical scan system Recording Playback system Signal to noise ratio 45 dB Horizontal resolution VHS 230 lines S VHS 400 lines Frequency range Normal audio 70 Hz to 10 000 Hz Hi Fi audio 20 Hz to 20 000 Hz Input Output RCA connectors IN x 2 OUT x 1 S video connectors IN x 2 OUT x 1 TUNER Tuning system Channel coverage Frequency synthesized tuner VHF Channels 2 13 UHF Channels 14 69 CATV 113 Channels RF output Channel 3 or 4 switchable preset to Channel 3 when shipped 75 ohms unbalanced TIMER Clock reference Quartz Program Capacity 1 year

JVC HR-S5902

Contents

Download Pdf Manuals

Related Search

Related Contents