Home

Philips 55PL9773 55" Rear Projection Television

image

Contents

1. HELPFUL HINT Remember the Language control makes only the TV s on screen Menu items appear in English Spanish or French text It does not change the other on screen text features such as Closed Captioning CC with TV shows Your TV can automatically set itself for local area or cable TV channels This makes it easy for you to select only the TV stations in your area by pressing the CH or button on the remote control 1 Press the Cursor Down button to select Install mode control 3 Press the Cursor Up or Down button to select one of the Press the Cursor Right button to display a list of Install mode options Antenna Automatic Cable options Select Antenna for normal outside or inside type antenna Select Cable for a cable company sup plied signal When Automatic is selected the TV will automatically set the mode based on the type of signal it detects coming into the TV The programming process may be faster if you choose the specific type of connec tion you have made either Antenna or Cable O000 OOO a wy a w Press the Cursor Left button after making your Install mode selection D Press the Cursor Down button to select Install Press the Cursor Right button to start the programming process Os UT Press the Menu button to remove the on screen menu from the TV screen wh
2. Main Menu Picture Install Install Press the Cursor Down button to see more Demo Mode options Freeze Replay Photo finish Demo 66 Install 0 Main Menu Picture Active Control Auto demo Dual screen Freeze Replay Photo finish Install Main Menu Picture Dealer demo O0O0O0O OOOO To see the Dealer Demo sublist press the Cursor Down button to select Dealer Demo then press the Cursor right Press the Cursor Dealer demo GR Digital options q Down or Up to select a mode then ee 3D Y C Comb filter press the Cursor Right to activate the mode Using the Installation Features When you plug in your TV for the first time it will prompt you to set the Language and Autoprogam the channels car VCR zi SAT aur os For Spanish and French speaking TV owners an on screen Language option is present The Language control enables you to set the TV s on screen menu to be shown in either English Spanish or French Press the Cursor Down button to select English Espa ol Spanish or Francais French Press the MENU button to remove the on screen menu from the TV screen or continue with Autoprogramming below After you have made your language selection press the OK button to confirm your selection QO OY 000 Active Control DOPOR N
3. eventually will need to be replaced Air Filters The air filters located at the bottom of the TV must be kept clean and free of blockage NOTE DO NOT operate the TV without the filters Damage to the TV will occur Allow four to six inches of space behind the TV for air flow through the back slots IMPORTANT Excessive heat inside the TV resulting from inadequate ventilation will cause the TV to shut down or not to operate Lamp An on screen message will alert you when the lamp is nearing the end of its expected lifetime so that you can change it before it wears out IMPORTANT The TV will not operate if the lamp door is left open and the TV will shut down if the door is opened during operation Picture Settings Your TV was set up at the factory for optimal showroom viewing For optimal home viewing change the Auto Picture setting to Natural See page 34 in the Direction for Use Manual Back of TV Ventilation Slots Locations of Air Filters Keep the Directions for Use manual accessible to correctly maintain and care for your TV as well as to understand and use its features Back of TV The lamp door must be closed for the TV to operate IMPORTANT Initial TV Setup Please read this Quick Use and Setup Guide completely before you turn on the TV When you turn on your TV for the first time it will prompt you to enter some setup information about
4. manual Menu On Off Press to display the TV s on screen menu or to turn it off CH Channel Selection Press to browse through the TV channels Digit Number Buttons Press to directly access a specific TV channel For a two or three digit channel enter all numbers Press a single digit button and hold a bit longer to directly access a sin gle digit channel These buttons can also be used to enter values in certain on screen menu controls PP AutoSurf If you set the Surf control in the TV s on screen menu to two channels this button will allow you to toggle between the current channel and the last viewed channel If you choose the nine channel Surf pressing this button allows you to add and scroll up to nine of your favorite channels See page 57 in the Directions for Use manual Active Control Plus NOTE Active Control Plus is not available for use with the AV3 AV4 AV5 and AV6 input sources Press to toggle the options Off Minimum Medium and Maximum Maximum is the recommended option See page 28 in the Directions for Use manual Picture Format Press to display a list of available picture formats for showing video images in the traditional 4 3 proportions Press this button repeatedly to select a picture format Choose from Automatic Super zoom Panoramic 4 3 Movie expand 14 9 Movie expand 16 9 16 9 subtitle and Wide screen See pages 35 36 in the Directions for Use manual NOTES e
5. the cable box and to the TUNER jack on the back of the TV Set the Output Channel switch on the back of the cable box 3 to CH 3 or 4 whichever is correct for your cable box then tune the TV to the corresponding channel Once tuned change channels at the cable box not the TV NOTE This connection will not supply stereo sound to the TV The reason is that the RF output on a cable box labeled TO TV OUT or OUTPUT for example will not send a stereo signal to the tuner VHF UHF input on a TV Cable Box with A V Outputs Connect the incoming cable TV signal to a signal splitter not supplied The signal splitter enables you to avoid having to use the TO TV jack on the back of the cable box This jack will not supply stereo sound to the TV NOTE Your cable box may have a different label for the TO TV jack such as OUTPUT or OUT Connect a coaxial cable not supplied to a connector on the signal splitter and to the TUNER jack on the TV Connect a coaxial cable not supplied to a connector on the signal splitter and to the CABLE IN jack on the back of the cable box Connect A V cables not supplied to the VIDEO and AUDIO L and R outputs on the back of the cable box and to the AV2 video labeled V and audio labeled L and R jacks on the back of the TV To view programs from your cable box first press the Source button on the remote control Press the Cursor Down or Up buttons until the AV2 signa
6. 60 in the Directions for Use manual Freeze mode stops action in the main screen Sound will continue to be heard Press again to resume nor mal viewing Replay mode displays a few seconds of stored video in the PIP window Photo Finish mode displays six stored frames from the picture NOTE Continuing to hold the Freeze Format button down will cycle the TV through the Freeze modes Freeze Replay and Photo Finish VOL Volume Press or to adjust the volume Mute Press to interrupt or restore sound Information Plus Press to show information when available about the current channel program source number or name local time CC availability SAP availability program ratings display format sound mode and remaining length of a Sleeptimer setting Dual Screen PIP Picture in Picture Press to turn the PIP dual screen on or off Continuing to hold the Dual Screen PIP button down will cycle through the Dual Screen PIP options See page 58 in the Directions for Use manual Active Control AutoSurf Incredible Surround and Pixel Plus are trademarks of Philips Consumer Electronics Copyright 2003 Philips Consumer Electronics All rights reserved Manufactured under license from Dolby Laboratories Dolby and the double D symbol are trademarks of Dolby Laboratories Remote Control shown from the bottom E Active Control 6 o m HELPFUL HINT When the batteries in your remote control ru
7. 7 18 03 Quick Use and Setup Guide E Wani ee a ee ee a ESEE nA 1 See tie User Manual 4 02006e b40seartaanes EAEE R E E l Posiiomne the TV oid ene Ao o 6 st Grn ee oh ne On a IET SERATA RERI oe 0 oe oe 2 Mounting the Swivel to the TV 2 0 eee eens 2 Mounting the Swivel and TV to the Stand 0 0 0 ee eee eee 3 Making Basic Connections to the TV 0 0 cece eee ees 3 5 Operating the TV oi cas canoer abe 440 Hb ed Ra ae EE aed Sm a 5 Using the Remote Control 1 0 0 0 0 0 0 cc nets 6 Using the On screen Menu 0 0 cee eee eee eens J Usine ihe Domo Mode 2 246ceuder s IrIAET EEE RE sou N RESEO eR Seeds 7 Using the Installation Features HDTV Monitor with Pixel Ly PHILIPS WARNING TO PREVENT FIRE OR SHOCK HAZARD DO NOT EXPOSE THIS UNIT TO RAIN OR EXCESSIVE MOISTURE x As an Energy Star Partner Philips Consumer Electronics has deter brug te mined this product meets the Energy Star guidelines for energy efficiency Energy Star is a U S registered mark Using products with the Energy Star label can save energy Saving energy reduces air pollution and lowers utility bills In addition to providing information about safety connecting accessory devices and using the T V s features the Directions for Use manual explains how to care for and maintain your Cineos television The TV contains air filters that must be maintained and eventually replaced and a lamp that
8. Language preference and Channel program ming See page 8 in this Quick Use and Setup Guide for more information about these menus 3135 035 21271 Language Autoprogram Select your menu language with the cursor up down Press the OK key on the remote control to confirm Positioning the TV Before connecting accessory devices VCR DVD player or HD l ae Situate the TV where it will not receiver for example please keep the following in mind be exposed to heat or moisture e Place the TV on a flat surface An unlevel surface may adversely J affect picture performance g Dai For safety do not set BV ti LG Do not place the TV on shag carpet or any surface that will objects on top of the TV Ca pkg block the air inlets at the bottom of the set Blockage will cause dT the TV to overheat and shut down e Allow 4 to 6 inches of space behind the TV for ventilation ies Ae miches behind the TV for ventilation e To purchase an optional swivel and or stand to go with your Philips Cineos TV see the electronics dealer where you bought your TV e Test various locations in the room to find the optimal spot to i Place the TV on locate the set for best viewing ae a flat surface Do not place the TV in direct sunlight or near a heating appliance e Do not expose the TV to rain or moisture To prevent any unsafe situations do not place objects on top of the TV Do not place the TV
9. Left or Right allowing adjustments to the values of the controls Some may show a box containing a list of multiple options set tings Others may have only an On or Off option 4 The Slider controls will be displayed on some features 5 To navigate the on screen menu start by pressing the Menu button on the remote control This will display the on screen menu in its starting position Demo or Install controls Starting from the TV item press the Cursor Right button on the remote control to select any of the Picture Sound Features or Channel controls Press the Cursor Down button to select any of the Setting See the Using the Demo Mode and Using the Installation Features on this page and the next Refer to the Directions for Use manual for all other control descriptions Picture Sound Features Channels or Settings HELPFUL HINT Pressing the Menu button once will display the on screen menu Pressing the Menu button any time the on screen menu is dis played will remove the on screen menu from the TV screen The first time you turn on the TV after purchasing it it will be in a special mode designed to inform you that you can change the menu language and on screen displays to English French or Spanish Also included in this mode is Autoprogram to encourage you to have the set program channels into the TV s memory For more details on the Language and Autoprogram features see page 8 Pict
10. With AV3 AV6 connections the Automatic picture format option is not available e In Dual Screen mode press the Picture Format button to switch between a full or 4 3 letterbox picture format Using the On screen Menu The TV s on screen menu controls are viewed within a mobile map or pipe system This system allows you to move along linked paths tied to specific Feature Title cate gories T V Picture Sound Features and Channels Each press of a Cursor button on the remote moves the cursor control to balls indicating specific con trols Each specific control may have multiple features that can be adjusted or set The animated on screen menu struc ture will expand to show all available on screen controls As it expands it will display a series of balls grouped together to reveal more controls Pipes represent the structure of the on screen menu They tie all the controls together and show the path you can fol low to access the available controls Balls indicate the titles of features or controls available on this television When highlighted some of these controls may show more Pipes and Balls indicating subcategories or lists of controls within the highlighted control These subcontrols will also have Pipes and Balls The Puck tells you which way movement may take place within the on screen menu The arrows on the Direction Indicator simulate the Cursor buttons on the remote control Up Down
11. and mounted swivel on the stand aligning the front and sides of the TV with the front and sides of the stand This will help properly seat the TV on the position Positioning ing pins and align the pre drilled holes on the stand and Pins swivel You do not need the rubber bumpers and long screws if you have already attached the swivel to the TV Use the supplied screws 2 and screw key to fasten the swivel to the stand Install the back cover by sliding it up into the groove above the opening the slide into the lower groove Note If accessories and cables protrude from the stand leave the back cover off Place accessory devices HD satellite receiver cable box DVD player or VCR for example inside the stand See below and Directions for Use manual for connection information Route the power cords through the opening in the bottom of the stand shelf and route the connection cables through the openings in the back of the stand Before swiveling the TV make sure you have left enough slack in the cords of any connected accessory devices This will prevent damage to the cords al oon kad Phd ea Installing these screws reduces the risk of the TV sliding Placing the TV
12. en the Autoprogramming process has fin ished HELPFUL HINT After Autoprogram is finished check the results Press the CH or button on the remote control to see which channels you can select See page 51 in the Directions for Use manual for instructions on removing channels Language Autoprogram Language Autoprogram English Press the cursor down to select English o Select your menu language with your menu language the cursor up down Press the OK key on the remote control to confirm Fran ais Fran ais Espa ol Espa ol Language Autoprogram English The language you have chosen is Fran ais nes Espanol Autoprogram Autoprogram Install mode The TV will search for find and store Install mode Oe Automatic all the available channels Install Install Press the cursor down to proceed Keep the prede fined automatic detection of cable or anntenna or make your own selection Autoprogram Antenna Install mode s Automatic Cable Install Autoprogram Install mode Automatic Install Autoprogram Autoprogram Install mode Install mode Install Start Install 24 analog channels found Searching To Autoprogram Analog channels press the right arrow Autoprogram Install mode Install 60 analog channels found Autoprogramming is complete
13. icate the remote is in your desired mode Once the mode is selected you must press a button within 60 sec onds for the remote to remain in the selected mode or it will default back to the TV mode See pages 26 27 in the Directions for Use manual Pressing and holding the Select button for 2 seconds backlights the remote control buttons The buttons remain lighted for 5 seconds after you press Select Source Press to display a list of source options T V AV1 AV2 AV3 AV4 AV5 AV6 or Side Use the Cursor Up Down buttons to select the next item then press the OK button to confirm or press the Source Select button to select the next item in the list Alternate Audio SAP When you tune to a channel where SAP Second Audio Program is available you can toggle between Main and SAP If SAP is not available only Main can be selected See page 42 in the Directions for Use manual PixelPlus Demo Press to activate the demo which illustrates the benefits of Pixel Plus Press again to turn the demo off Press and the TV screen will be divided in half displaying the Pixel Plus Demo The left side will show the picture with Pixel Plus switched off The right side of the screen will show the picture with Pixel Plus switched on See page 30 in the Directions for Use manual OK Press to activate or confirm menu choices Freeze Format Pressing will apply one of the Freeze modes you set using the on screen menu See page
14. l es es es Se ees es Signal Splitter example TV AV1 0ther Source AV2 0ther AV3 0ther HELPFUL HINT Your TV remote is capable of operating accessory AV4 Other devices such as cable boxes See the sections on AV5 0ther AV6 0ther SIDE Other Programming the Remote Control and Operating Accessory Devices with the TV Remote in the Directions for Use manual that came with the TV G L VCR DVD SAT A w OQ Active Control 0 0000 Making Basic Connections to the TV Connect the incoming antenna signal to the TUNER jack on the back of the TV See page 8 for details on using Autoprogram to store channels in the TV s memory NOTE This connection will supply stereo sound to the TV if it is being broadcast by the station you are watching Back of TV lt 4 S VIDEO li E H OO fe Bs oO OMOM 9 loo alm Incoming 6 0 eee 6 Antenna Signal R L Pr Pb Y STANDARD HD INPUTS HD INPUTS R L Connect the incoming Antenna signal to the TUNER jack on the back of the TV Operating the TV Your television has a set of buttons located on the top of the cabinet for use when the remote control is not needed or unavailable 1 Press the Standby On button to turn the TV on NOTES Due to the complexity and adva
15. l source is selected Press the OK button to confirm your selection The AV2 input source becomes current for the viewing of cable TV programs through your cable box OUI Aa WN NOTE If your cable box Audio Video outputs will not supply video and stereo audio to the TV you will need to make the connection shown above in the example Cable Box with RF IN OUT Watching Cable TV Programs That Don t Require the Cable Box Since you ve connected the cable TV signal directly to the TV s tuner step 2 above you can also watch the unscrambled pro grams by simply tuning to the desired channel You must first use Autoprogram however to store channels in the TV s memory See page 8 NOTE This connection will supply stereo sound to the TV if it is being broadcast by the station you are watching Back of TV Incoming Cable TV Signal lt 4 S VIDEO Backot Cable Box example onl P y OUTPUT H E C in m E 3 4 R L Pr Pb Y STANDARD HD INPUTS b Y HD INPUTS HD INPUTS R L Back of TV ie So _ Video yellow Audio L white Audio R red Audio R red Audio L white Video yellow N ze example only Back of Cable i OUTPUT CH O TO TV CABLE IN Outputs Input n E STANDARD Pr i L z HD INPUTS Y H Incoming Pr ee E lls TH Cable TV ER _ mjii Signa
16. n low the remote control will send a Battery low command to the TV The TV will then display a message on the screen reminding you to replace the batteries as soon as possible Standby On Press to turn the TV on or off NOTE The TV is never powered off completely unless it is physically unplugged from the power source Surround Sound Press to display a list of available sound modes Choose from Incredible Surround and Dolby Virtual settings See page 41 in the Directions for Use manual VCR DVD Functions When the remote is in the VCR mode these buttons will allow you start a recording rewind a tape lt q lt q stop the playback of a tape MM play a videotape P gt or fast forward a videotape PP Time Display Press to display the current time on the TV screen CC Closed Captioning Press to turn Closed Captioning off on or on during mute See page 47 in the Directions for Use manual Cursor Up Down Right Left Use to navigate the on screen menu and make control adjustments or settings Additionally use these buttons to pan the screen up or down to show any excluded parts of the picture Left or right panning is possible with the Side input source when Game is selected as the type of source for the Side input See page 18 in the Directions for Use manual Also use with the Dual Screen PIP feature to select a screen or reposition a PIP screen See page 58 in the Directions for Use
17. nced design of the Cineos TV a turn on time of 16 seconds should be expect ed When you turn the TV off it remains in Active Standby mode orange light on for 30 seconds and will not respond to any presses of the remote control or cabinet buttons during that time This is to protect the lamp Press the VOLUME up button to increase the sound level or the VOLUME down button to lower the sound level Or use the buttons to navigate right or left when the on screen menu is displayed TV channels Or use the buttons to navigate up and down when the on screen menu is displayed 3 Press the CHANNEL A up or W down button to select To access the on screen menu press the MENU button To 4 navigate the menu use the VOLUME up down and CHANNEL A up down buttons to navigate the menu as described in the previous steps HELPFUL HINT The Cabinet button panel is protected during shipping by a adhesive plastic film You may peel this off and discard it Cabinet Buttons Active Control Plus Window This window contains a sensor that monitors the ambient light conditions in the room and adjusts key picture settings for best viewing Remote Sensor Window Receives commands from the remote control Active Standby Window Active Standby the condition in which the TV is either in the process of turning on or off Active Standby is entered by pressing the Standby On button on the TV or remote c
18. on a surface that will block the air filters located underneath the set Following are instructions for mounting the optional swivel NOTE Attach the swivel before hooking up the TV 1 Remove and Place on Floor Remove the foam cushion polybag from around your TV and place it on the floor NOTE At least two people are required to perform this task Carefully lay the TV back flat on the foam cushion polybag with the screen up WN JAA O Use screws to fasten rubber bumpers to the swivel as shown Guide the two rubber bumpers on the swivel into the corresponding holes on the bottom of the TV Alene ay YH N SA Use the supplied screws 4 to fasten the swivel to the TV i Polybag Tighten the screws until hand tight Do not overtighten Sa ee Polyba Optional Swivel Be sure the swivel is in center position yng Place the TV and mounted swivel upright on a level sur face preferably a TV stand An unlevel surface may adversely affect picture performance Once you have posi tioned TV on a TV stand or other surface remove the wooden 0 Degree Holder by pulling it to the left then toward the front of the TV The swivel will not turn until it is removed Ula W N Rubber Bumpers 0 Degree Holder 0 Degree Holder Optional Stand Swivel in Center Position Mounting the Swivel and TV to the Stand Install the plastic position pins in the stand Place the TV
19. on the Stand Rubber Locators without the Swivel If you should decide not to purchase the optional swivel you can place the TV directly on the stand e First locate the nut and washer for each supplied rubber locator 2 e Place the rubber locators over the pre drilled holes in the stand e Place the washer and nut on each rubber locator e Tighten each nut e Place the TV and mounted swivel on the stand aligning the front and sides of the TV with the front and sides of the stand This will help properly seat the TV The rubber locators will prevent the TV from sliding Cable TV Connect the cable TV signal to the TUNER jack on the back of the TV See page 8 for details on using Autoprogram to store chan nels in the TV s memory NOTE This connection will supply stereo sound to the TV if it is being broadcast by the station you are watching Incoming Cable TV Signal mr OOO ua 6 0 OO R L Pr Pb Y STANDARD HD INPUTS STANDARD Pr Pb Y z HDINPUTS TUNER Connect the incoming cable TV signal to the TUNER jack on the back of the TV Making Basic Connections to the TV Cable Box with RF IN OUT Connect the incoming cable TV signal to the CABLE IN jack on the back of the cable box Connect a coaxial cable not supplied to the TO TV jack on the back of
20. ontrol An orange light appears in the window Active Standby mode occurs when the TV is turned on to allow for the automatic calibration of the clock and for 30 sec onds after the TV has been powered off The 30 second Active Standby period at power off is to protect the lamp During this time the TV will not respond to presses of cabi net or remote control buttons On the TV has picture and sound A green light shows in the window Standby the condition in which the TV is plugged into the AC outlet and is in the off state No light is on in the win dow The TV s microprocessors and their standby supplies are the only active components in this state and the power consumption is less than watt Using the Remote Control Installing the Batteries To load the supplied batteries into the remote 1 Remove the battery compartment door on the back of the remote Place the batteries 2 AA in the remote Make sure the and ends of the batteries line up correctly the inside of the case is marked 3 Reattach the battery compartment door Be sure to point the remote at the Remote Sensor window on the front of the television when using it to operate the television Remote Control Buttons Select CBL VCR DVD SAT AMP and Backlight Press this button to cycle across the accessory mode dial Stop pressing when the mode you desire is lighted The light will stay on for 2 seconds and then begin blinking to ind
21. ure Sound Features Channels Picture Sound Features Channels TV TV Settings Settings Puck f Demo Demo Balls Install Install Feature Titles or Controls Picture Sound Features Channels TV Oat Settings Demo Install Y 2 Picture Sound Features Channels Contrast C Brightness Color a 0000 00000 0 00004 Sharpness Using the Demo Mode Several features of this television can be placed in a demo mode which will show you how a feature works Auto Demo will automatically show all the feature demos one after another except for the Dealer Demo mode Specific demo modes can be selected from the list of options within the Demo control Auto demo Dual screen PIP and Install for example The Dealer Demo also has a sublist of the following options Digital options Lightsensor and 3D Y C Comb filter Press the Menu button on the remote control to show the on screen menu Press the Cursor Down button repeatedly until Demo is selected Press the Cursor Right button to shift the menu to display the list of Demo mode options Press the Cursor Down or Up button to select a Demo mode option Press the Cursor Right button to activate the Demo Ui Aa W N Picture Sound Features Channels TV TV perangs ares Auto demo Demo Demo Jeg Dual screen Freeze Replay Photo finish Install

Download Pdf Manuals

image

Related Search

Related Contents

Control Remoto Mediante Comunicaciones TCP/IP de Radioayudas  Redutores para Torre de Resfriamento  RCA DRD480RE Receiver  MODE D`EMPLOI FRANÇAIS  00_Front Cover and Front Matters.fm  Products Range 2015  Hardware Installation LEDs Explained  Leica V-LUX 40 Instruction Manual  Memoir `44 Online  Operator`s Manual  

Copyright © All rights reserved.
DMCA: DMCA_mwitty#outlook.com.