Philips MC-500 CD Shelf System
Contents
1. 8 9 Control buttons available on the Ei 9 Connections Step 1 Connecting FM AM antennas 10 Step 2 Connecting the speakers 11 Step 3 Connecting to PC 11 Step 4 Connecting the AC power cord 11 Step 5 Inserting batteries into the remote CON OM sila 11 Using the remote control to operate O 11 USB PC Link Quick Setup Guide carita 12 PC system requirement 12 Install MusicMatch software 12 Enable digital CD audio output 13 Connecting USB PC Lora 13 Basic Operations Switching On Off irradia 14 Switching to active mode 14 Switching to Eco Power standby mode 14 Switching to standby mode view clock 14 Demonstration MOE 14 Setting te cocaina 14 Selecting different display mode 15 DAT OCS aida 15 Clock display MOE sssi 15 VOIUMENCONELO linea 15 SOUNA CONO scontata 15 MAX Sound did 15 Digital Sound Control susen 15 Virtual Environment Control 15 Disc Operations Playable ains 16 Loading CIS CS canos 16 Basic playback controls sssr 16 17 Repeat and Shuffle atari 17 Repeat Dyna 17 Random play nta lid 17 Programming the disc tracks o 17 Checking the programme ssu 18 Playing a disc without clearing the programs ala 18 Clearing the programme susse 18 Tuner O perations Tuning to radio stations sssri 19 P2. Press PROGRAM PROG gt The preset number starts flashing If you want to store the radio station in another preset number press Mi or Pl Press PROGRAM PROG again to store Repeat steps 1 3 to store other radio stations 19 Tuner O perations 20 Selecting a preset radio station In tuner mode press I or DI gt The preset number radio frequency and waveband are displayed Deleting a pe radio station is displayed The current preset radio station will be deleted gt All other preset radio stations with higher numbers are decreased by one RDS RDS Radio Data System is a service that allows FM stations to show additional information If you are receiving a RDS station RDS and the station name are displayed Scrolling through RDS information Tuned to a RDS radio station from FM band then press NEW SDS repeatedly to select the following information if available Station name Programme type for example News Affairs Sport etc Radio text messages Frequency Setting the RDS clock Some RDS radio station may be transmitting a real clock time at an interval of every minute It is possible to set the clock by using a time signal which is broadcast together with the RDS signal Tuned to a RDS station from FM band refer to Tuning to radio stations Press and hold CLOCKSTIMER on the Z ETT MI ML mo main unit until GELLEL LULL
3. To create a music library A music library of all stored music files available on your PC can be setup by simply select add function on the MusicMatch Jukebox Once created you may then choose to drag drop any music tracks from this library to a Playlist for music playback Note Itis not possible to create a playlist from the system s 5 CD changer If you encounter problem using USB PC LINK please refer to the FAQ Frequently Asked Questions stored in your USB PC LINK installer disc or visit www audio philips com for latest update on FAQ Enable digital CD audio output Before playing the CD through your PC s CD ROM drive it is necessary to configure your PCs hardware as follows For Windows ME 2000 XP Enter the system control panel menu and select SYSTEM gt HARDWARE gt DEVICE MANAGER CD ROM DRIVES gt ACTIO N PRO PERTIES PRO PERTIES OR For Windows 98 Enter the system control panel menu and select MULTIMEDIA and CD MUSIC Check the Enable digital CD audio for this CD ROM device setting option is selected enabled Note You may need to refer to your PC s manual for correct configuration Connecting to USB PC Link USB PC Link USB PC LINK allows you to playback your music collection from the PC via the powerful amplifier and speakers of this system IMPORTANT Make sure the MusicMatch software has been installed Refer to Quick S
4. Finding a suitable location Place the system on a flat hard and stable surface Built in safety circuit Under extreme conditions this system may switch to standby mode automatically If this happens let the system cool down before reusing it Power saving This system is designed to use less than 1W of electricity when switches to Eco Power standby Disconnect the AC power cord from the power outlet when not In use Functional Overview Main unit and remote control 1 ECO POWER indicator Lights up when the system Is in Eco Power standby mode 2 STANDBY ON Switches to Eco Power standby mode or turns on the system Switches to standby mode 3 PLAY PAUSE II CD starts pauses playback USB PC LINK starts pauses playback only on the main unit TUNER enters Plug amp Play mode and or starts preset radio station installation 4 STOPDEMO STOP E Exits an operation CD stops playback or clears a programme TUNER erases a preset radio station USB PC LINK stops playback only on the main unit Turns on off the demonstration mode B 42 da 13 Oe Bl 45 46 a O Te 2 a PAE AN Pte e TUNER O O 3 2 A Ox 24 28 su e 3 oF 3 7 mg Yam a uN PHILIPS 5 PREV M4 NEXT gt V PRESET A CD selects a track TUNER se
5. Programming the disc tracks Programming tracks is possible when playback is stopped Up to 40 tracks can be stored in the memory in any order Load the desired discs on the disc trays refer to Loading discs O Press PROGRAM PROG to start programming lt gt PROG starts flashing Press CD or one of the DISC 1 5 buttons to select a disc O Press Mi or Pl repeatedly to select the desired track Press PROGRAM PROG to store O Repeat steps 3 5 to select other discs and store the tracks Skip step 3 if you are selecting tracks from the same disc gt If you attempt to programme more than 40 RUT L is displayed MATA CINA IN I LIL tracks PATA FFAA To start programme play press H To stop playback or to end the programming press M once gt PROG stays and the programme mode remains active Notes If the total playing time reached 100 minutes or if one of the programmed tracks has a number greater than 30 then is displayed instead of the total playing time The system will exit programming mode if no button is pressed within 20 seconds 17 Disc Operations Stop playback then press Mi or DI repeatedly Press H to exit OR Press gt II to start playback from the current programmed track Playing a disc without clearing the programme O Press one of the CD 1 5 buttons on the remote to select a disc for pl
6. dBA gt 40 dB 1 kHz lt 0 3 1 kHz 87 5 108 MHz 531 1602 kHz 40 75 Q wire Loop antenna 2 way Bass reflex 60 1x525 1 x 2 Ferrofluid cooled 180 x268 x225 mm 2 5 kg each GENERAL Material finish AC Power Power Consumption Active Standby Eco Power Standby Dimensions w x h x d Weight without speakers Polystyrene Metal 220 230V 50 Hz 80 W lt 15 W lt 0 5 W 175 x268 x316 mm 4 7 kg Specifications and external appearance are subject to change without notice WARNING Under no circumstances should you try to repair the system yourself as this will invalidate the warranty Do not open the system as there is a risk of electric shock Troubleshooting If a fault occurs first check the points listed below before taking the system for repair If you are unable to remedy a problem by following these hints consult your dealer or Philips for help Problem Solution W hen in USB PC LINK mode NO CONNECTION is displayed Radio reception is poor NO DISC is displayed or the disc cannot be played DISC NOT FINALIZED is displayed The system does not react when buttons are pressed Sound cannot be heard or is of poor quality The remote control does not function properly The timer is not working The system displays features automatically and buttons start flashing Vv AN ES XY SSSSS SSN VAN SNS Check the connection betw
7. switch the system to Eco Power standby or standby mode it will begin showing the various features offered by the system To activate the demonstration In Eco Power standby standby mode press and hold M on the main unit until EME LIN is displayed To deactivate the demonstration Press and hold E on the main unit until o NATI TI L is displayed LI tht Luar Oo Setting the clock The clock can be set in erther 12 hour or 24 hour mode 11 55 PM or 23 59 for example 00 00 12 00AM 00 00 12 00AM 00 00 12 00AM 0 0 Press and hold CLOCK on the remote until the time flashing on the display OR Press and hold CLOCK TIMER on the main unit until SELECT LLULK OF TIMER is displayed Then press Pl to change the display to LLULK and press CLOCKSTIMER again to confirm Press PROGRAM PROG repeatedly to change between 12 hour and 24 hour clock mode Press lt 4 or PP repeatedly to set the hour Press Ml or P repeatedly to set the minute Press CLOCK or CLOCK TIMER to store the setting gt The clock will start working Notes The clock setting will be erased when the system is disconnected from the power supply The system will exit clock setting mode if no button is pressed within 90 seconds To set the clock automatically through the time information in the RDS signal refer to Tuner Operations Setting the RDS clock Sel
8. the cord grip is clamped over the sheath of the lead not simply over the two wires Copyright in the U K Recording and playback of material may require consent See Copyright Act 1956 and The Performer s Protection Acts 1958 to 1972 Italia DICHIARAZIONE DI CONFORMITA Si dichiara che l apparecchio MC 500 Philips risponde alle prescrizioni dell art 2 comma 1 del D M 28 Agosto 1995 n 548 Fatto a Eindhoven Philips Consumer Electronics Philips Glaslaan 2 5616 JB Eindhoven The N etherlands Norge Typeskilt finnes p apparatens underside Observer Nettbryteren er sekundert innkoplet Den innebygde netdelen er derfor ikke frakoplet nettet sa lenge apparatet er tilsluttet nettkontakten For a redusere faren for brann eller elektrisk stat skal apparatet ikke utsettes for regn eller fuktighet CAUTION Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation VAROITUS Muiden kuin t ss esitettyjen toimintojen s d n tai asetusten muutto saattaa altistaa vaaralliselle s teilylle tai muille vaarallisille toiminnoille tir PHILIPS Do Spas amp DK Advarsel Usynlig laserstraling ved abning nar sikkerhedsafbrydere er ude af funktion Undg utsattelse for straling Bem rk Netafbryderen er sekund rt indkoblet og ofbryder ikke strommen fra n
9. to the last active source or stays in standby mode Timer Operations Temporarily deactivating the wake up timer You are only able to activate the Snooze function within 30 minutes after the timer wake up from Standby mode After timer wake up press SNOOZE on the remote gt The system will switch to standby mode for five minutes After that it resumes the timer last selected source again To cancel the snooze function press SNOOZE again Sleep timer setting The sleep timer turns the system to Eco Power standby mode at a preselected time Press SLEEP repeatedly until it reaches the desired preset turn off time gt The selections are as follows time in minutes a Soe ae og eo are 5 gt SLEEP is shown except for LIF F mode gt To view or change the setting repeat the above O Before the system switches to Eco Power standby mode a countdown of 10 seconds is displayed Ett Wr Cod CI DI DICI LLL Lun JLo Los r wep Cn I LE gt To cancel the sleep timer O Press SLEEP repeatedly until OFF is displayed or press the STANDBY ON button Other Connection Listening to an external source You can listen to the sound of the connected external device through your system s speakers E Use the red white audio cables to connect the system s AUX CDR IN R L terminals to the AUDIO OUT terminals on the other audio visual device such as a TV VCR Lase
10. I C99 may appear on the display panel when the AC power cord is plugged into the power outlet for the first time Press gt I on the main unit to store all available radio stations page 3 P3 or press W to exit refer to Tuner O perations Connections Step 5 Inserting batteries into the remote control Open the battery compartment cover Insert two batteries type RO6 or AA following the indications inside the compartment Close the cover Using the remote control to operate the system Am the remote control directly at the remote sensor IR on the main unit Select the source you wish to control by pressing one of the source select keys on the remote control for example CD TUNER Then select the desired function for example gt I MH DI CAUTION Remove batteries if they are exhausted or will not be used for a long time Do not use old and new or different types of batteries in combination Batteries contain chemical substances so they should be disposed of properly 11 USB PC Link Quick Setup Guide Windows 98 ME 2000 XP Intel Pentium MMXX200 or higher CD ROM drive USB port Free hard disk space 15 MB for the software Install MusicMatch software Use the supplied USB cable to connect the audio system to your personal computer s U
11. ILIA LIS TIMER is displayed Then press Pl to change the display to LLULK and press CLOCKSTIMER again to confirm Press NEW SRDS SEARCH RIS TIME is displayed gt When RDS time is read the current time will be stored If the RDS station does not transmit RDS time within 90 seconds NO RUS TIME is displayed N ote Some RDS radio station may be transmitting a real time clock at a minute interval The accuracy of the transmitted time depends on the transmitting RDS radio station Tuner Operations NEWS You may set up the tuner in such a way that listening to CD or external source is interrupted by the NEWS of a RDS station This only works if the RDS station broadcasts a NEWS signal while sending the news IMPORTANT You can activate NEW S function from any source mode except TUNER Switching on NEWS function In any active mode press NEW SRDS until NEWS is displayed gt NEWS is shown gt The system will scan the radio stations stored in the first five 5 preset and wait for the News Programme lype data to be available in any of these RDS stations gt While searching NEWS in progress the current active mode remains uninterrupted When NEWS transmission is detected the system will switch to Tuner mode gt NEWS starts flashing O If no RDS station is detected in the first five presets the system will exit NEWS function 3 NO RI NEWS is displayed Notes You ha
12. MAX is shown and the MAX SOUND button lights up All other sound effects DSC or VEC will be switched off automatically Digital Sound Control DSC provides a different type of preset sound equaliser setting Press DSC repeatedly to select O PTIMAL JAZZ ROCK or POP Virtual Environment Control VEC provides a different type of environment based equaliser setting Press VEC repeatedly to select HALL CINEMA CONCERT or CYBER Disc Operations mn oy aay A 16 IMPORTANT This system is designed for regular discs Therefore do not use any accessories such as disc stabiliser rings or disc treatment sheets etc as offered on the market because they may jam the changer mechanism Do not load more than one disc onto each tray Playable discs This system is able to play All pre recorded audio CDs All finalised audio CDR and audio CORW discs oise dise aise DIGITAL AUDIO DIGITAL AUDIO DIGITAL AUDIO Recordable ReWritable Loading discs page 3 P4 W Press OPEN CLOSE amp 1 button to open disc tray 1 Load a disc with the label side facing up For double sided discs load the side you want to play facing up Press OPEN CLOSE 4 1 button again to close the disc tray gt CIT TATI Th Ts gt freni is displayed The selected disc tray total number of tracks and the playing time will appear on the display Repeat steps 1 3 for loading discs onto th
13. Micro Hi Fi System visit our website www audio philips com to download latest UPDATES of USB PC Link Driver MusicM atch Jukebox softwares and FAQs PHILIPS Important notes for users in the U K Mains plug This apparatus is fitted with an approved 13 Amp plug To change a fuse in this type of plug proceed as follows Remove fuse cover and fuse Fix new fuse which should be a BS1362 5 Amp A S TA or BSI approved type Refit the fuse cover If the fitted plug is not suitable for your socket outlets it should be cut off and an appropriate plug fitted in its place If the mains plug contains a fuse this should have a value of 5 Amp If a plug without a fuse is used the fuse at the distribution board should not be greater than 5 Amp Note The severed plug must be disposed of to avoid a possible shock hazard should it be inserted into a 13 Amp socket elsewhere How to connect a plug The wires in the mains lead are coloured with the following code blue neutral N brown live L As these colours may not correspond with the colour markings identifying the terminals in your plug proceed as follows Connect the blue wire to the terminal marked N or coloured black Connect the brown wire to the terminal marked L or coloured red Do not connect either wire to the earth terminal in the plug marked E or or coloured green or green and yellow Before replacing the plug cover make certain that
14. SB port Press USB PC LINK Turn on the PC and insert the USB PC LINK installer disc which comes with this product onto the PC s CD ROM drive This application software can also be downloaded from http www audio philips com IMPORTANT Please use this customised MusicMatch software for your USB PC Link application Remember to ur install all other MusicMatch jukebox software first from your PC system if available O The installation guide will appear automatically If tt does not go to the CD ROM drive in Windows Explorer and double click on the U SBPC LIN K exe Then perform the following steps First select your desired language from the list Then select Installer driver and follow by installer MusicMatch jukebox Select other options Tutorial Free goodies FAQ Note You are advised to read the M usicM atch tutorial before using it for the first time Make sure the mute function on the PC is deactivated in order to ensure sound output from the Audio System For optimum performance the equaliser function in M usicM atch should be set to a low level Launch the MUSICMATCH JUKEBOX and choose to do one of the followings To create a Playlist Select O pen button on the MusicMatch Jukebox and simply drag drop the music tracks from anywhere on your PC into the Playlist window Remember to save this Playlist for future use
15. ayback gt After the selected disc has been played the programme mode will resume Clearing the programme O Stop playback then press M to clear the programme OR Press the OPEN CLOSE 4 button of the programmed disc tray gt PROG disappears and ruin is displayed Note The programme will be erased if the system is disconnected from the power supply 18 IMPORTANT Make sure the FM and MW antennas are connected Tuning to radio stations Press TUNER to enter tuner mode To select another waveband FM or MW press TUNER again Press and hold 44 or PP until the frequency indication starts to change then release gt The system automatically tunes to the next strong signal radio reception gt lights up for FM stereo reception RDS lights up for RDS station in FM band only For tuning to a weak signal station O Press 44 or PP briefly and repeatedly until an optimal reception is found Presetting radio stations You can store up to 40 preset radio stations in the memory starting from FM and followed by MW bands Notes The system will exit presetting mode if no button is pressed within 20 seconds If no stereo frequency is detected during Plug and Play CHECK ANTENNA is displayed Using the Plug and Play page 3 P3 Plug and Play allows you to store all available radio stations automatically Connect the system to the power supply AUTO INSTALL PRESS PLAY i
16. ck the disc remaining playing time Press DISPLAY on the remote gt During random play or programme play the total remaining time will not be shown To restore the display for elapsed playing time repeat the above To interrupt playback O Press gt H gt To resume normal playback repeat the above To stop playback O Press W gt If the system remains in stop mode for 30 minutes it will switch to Eco Power standby mode Repeat and Shuffle You can select and change the various play modes before or during playback Press REPEAT on the remote repeatedly to select TRK TRK REP REP DISC REP DISC REP REP ALL PROG PROG ALL a A to repeat playback of the current track to repeat playback of the current disc to repeat playback of all available discs D to repeat playback of the current programmed track only if the programme mode Is active E to repeat playback of all the programmed tracks only if the programme mode is active To resume normal playback press REPEAT until LFF is displayed O Press SHUFFLE on the remote to turn on off the shuffling mode gt If activated SHUF is shown and the repeat mode if any will be cancelled All the available discs or programmed tracks if programme is active will be played in random order Note Pressing the OPEN CLOSE button will cancel all repeat and shuffling modes Disc O perations
17. e disc trays 2 5 Notes To ensure good system performance wait until the disc trays completely read the disc s before proceeding Only one tray can be opened at each time If you open the second tray before closing the first tray the first tray will automatically close before the second tray opens Basic playback controls Load discs page 3 P4 To play all discs on the disc trays O Press PIL OR In stop mode press CD to select a disc tray to begin then press II gt All the available discs will play once then stop To play the selected disc only Press one of the 5DISC DIRECT PLAY DISC 1 5 buttons or CD 1 5 on remote gt The selected disc will play once then stop To select a desired track O Press lt or DI repeatedly until the desired track Is displayed To skip to the beginning of the current track during playback press Hf once gt During random play shuffle mode pressing I will cause the player to skip only to the beginning of the current track To search for a particular passage during playback O Press and hold lt 4 or PP and release it when the desired passage Is located gt During searching the volume will be reduced To replace discs without interrupting playback O Press OPEN CLOSE 4 buttons of the Inactive disc trays refer to Loading discs For example if currently disc tray 1 is playing you can replace the discs on disc tray 2 5 To che
18. ecting different display mode You can select the desired brightness for the display panel In any active mode press DIM repeatedly to select DIM 1 DIM 2 DIM 3 or DIM OFF display mode gt DIM is shown except for DIM OFF mode DIM mode button display Spectrum illumination brightness analyzer DM OFF N ote Pressing DIM button in standby mode will toggle between half and full brightness Clock display mode You can choose to show the clock display only Press CLOCK lt TIMER or CLOCK on remote In any active mode pressing the button again will resume normal display Note If you pressed any buttons in clock display mode the display will briefly show the information related to the selected mode Basic O perations Volume control Adjust MASTERVOLUME or press VOL on remote to increase or decrease the sound level mer MITIN Vol METE is the minimum volume level Tures and I ff is the maximum volume level To switch off the volume temporarily Press MUTE on the remote gt Playback will continue without sound and MUTE is displayed gt To restore the volume press MUTE again or increase the volume level Sound control You are only able to select one of the sound controls at a time MAX sound DSC orVEC MAX sound provides the best mixture of various sound features DSC VEC for example Press MAX SOUND or MAX ON OFF on remote gt If activated
19. een your PC and the system and the inital setup required see Connections and USB PC Link Make sure the connected PC is turned on If the signal is too weak adjust the antenna or connect an external antenna for better reception Increase the distance between the system and your TV or VCR Insert a disc Load in the disc with label facing right Replace or clean the disc see Care and safety information Use a finalised CD R W or a correct format disc Remove and reconnect the AC power cord and switch on the system again Adjust the volume Disconnect the headphones Check that the speakers are connected correctly Check that the AC power cord is connected properly When in USB PC LINK mode check that the PC s volume is not put into mute When playing CD from PC s CD drive refer to USB PC Link Enable digital CD audio output Select the source CD or TUNER for example before pressing the function button gt II lt lt lt gt gt Reduce the distance between the remote control and the system Replace the battery Point the remote control directly toward the IR sensor Set the clock correctly Press TIMER ON OFF to switch on the timer Press and hold DEMO STOP on the main unit to switch off the demonstration mode Refer to the FAQ Frequently Asked Questions on the supplied CD ROM or visit our website www audio philips com for latest update on FAQ 25
20. ettet Den indbyggede netdel er derfor tilsluttet til lysnettet s lenge netstikket sidder i stikkontakten S Klass 1 laseraparat Varning Om apparaten anvands pa annat satt an i denna bruksanvisning specificerats kan anvandaren utsattas for osynlig laserstralning som verskrider gr nsen for laserklass 1 Observera Stombrytaren ar sekundart kopplad och bryter inte str mmen fran natet Den inbyggda natdelen ar darfor ansluten till elnatet sa lange stickproppen sitter i vagguttaget SF Luokan 1 laserlaite Varoitus Laitteen kayttaminen muulla kuin tassa kayttoohjeessa mainitulla tavalla saattaa altistaa kayttajan turvallisuusluokan 1 ylitt valle nakymattomalle lasersateilylle Oikeus muutoksiin varataan Laite ei saa olla alttiina tippu ja roiskevedelle Huom Toiminnanvalitsin on kytketty toisiopuolelle eika se kytke laitetta irti sahk6verkosta Sis nrakennettu verkko osa on kytkettyn s hk verkkoon aina silloin kun pistoke on pistorasiassa PHILIPS MC 500 C Tested To Comply With FCC Standards Energy Star As an ENERGY STAR FOR HOME OR OFFICE USE Partner Philips has determined that this product meets the ENERGY STAR guidelines for energy efficiency Index UN 5 Contents General Information Supplied accessories incio aio aaa 7 Environmental information sssrin 7 Care and safety information esseen 7 Functional Overview Main unit and remote control
21. etup Guide for USB PC Link O Turn on your computer and launch the MUSICMATCH JUKEBOX The volume level of PC should not be put into mute Press USB PC LINK If the audio streaming is detected LUNNEL I IND is displayed and the USB indicator will be flashing If NO CONNE LI LUN is displayed check the connection between your PC and micro system Press Mi or BI until the desired track in the playlist is highlighted O Press gt IM to start playback The track information will appear on the display The display only supports English characters During playback Press SHUFFLE to play all available tracks in the playlist in random order Press REPEAT to repeat playback of all the tracks in the playlist O To exit select another active mode or press 13 Basic Operations Switching on off Switching to active mode Press CD TUNER AUX or USB PC LINK Switching to Eco Power standby mode Press gt ECO POWER button lights up The display screen will go blank Switching to standby mode view clock Press and hold The clock is displayed gt While in standby mode pressing CLOCK TIMER button will switch the system to Eco Power standby mode Note Before switching the system to Eco Power standby or standby mode make sure the demonstration mode has been deactivated Demonstration mode Ifthe demonstration mode is active whenever you
22. lects a preset radio station CLOCK sets the minutes USB PC LINK selects a track from the playlist 6 4d SEARCH TUNING gt gt CD searches backward forward TUNER tunes the radio frequency up down CLOCK sets the hours USB PC LINK searches backward forward 7 PROG PROGRAM CD starts or confirms tracks programming TUNER starts automatic manual preset programming CLOCK selects 12 or 24 hour clock display NEWS RDS In tuner mode selects RDS information In other modes turns on off news 9 CLOCK TIMER Enters clock or timer setting mode Switches to clock display mode Press and hold the button for more than two seconds Display screen 1 iR Point the remote control towards this sensor 12 Disc trays 1 5 13 5 DISC DIRECT PLAY 1 5 CD 1 5 Selects a disc tray to playback OPEN CLOSE 4 1 5 Opens closes the individual disc tray 5 MAX SOUND MAX ON OFF Turns on off the optimal mix of various sound features MASTERVOLUME VOL Adjusts the volume level 17 VEC Selects different type of environment based equaliser settings HALL CINEMA CONCERT or CYBER 18 DSC Selects different type of preset sound equaliser settings OPTIMAL JAZZ ROCK or POP CD TUNER AUX USB PC LINK Selects the relevant active mode CD toggles between DISC 1 5 TUNER toggle
23. m buffer and polyethylene bags protective foam sheet Your system consists of materials which can be recycled and reused if disassembled by a specialised company Please observe the local regulations regarding the disposal of packaging materials exhausted batteries and old equipment General Information Care and safety information page 3 P2 Avoid high temperatures moisture water and dust Do not expose the system batteries or discs to humidity rain sand or excessive heat caused by heating equipment or direct sunlight Always keep the disc tray closed to avoid dust on the lens Avoid condensation problem The lens may cloud over when the system is suddenly moved from cold to warm surroundings making it impossible to play a disc Leave the system in the warm environment until the moisture evaporates Do not block the vents Ina cabinet allows about 10cm 4 inches of free space all around the system for adequate ventilation Care of disc To clean a CD wipe it in a straight line from the centre towards the edge using a soft lint free cloth A cleaning agent may damage the disc Write only on the printed side of a CDR W and only with a soft felt tipped pen Handle the disc by its edge do not touch the surface Care of the cabinet Use a soft cloth slightly moistened with a mild detergent solution Do not use a solution containing alcohol spirits ammonia or abrasives
24. power switched on Connect the AC power cord to the power outlet only after you have finished hooking up everything DIS AC power cord Step 1 Connecting FM AM antennas Place the AM loop antenna on a shelf or attach it to a stand or wall Extend the FM antenna and fix its ends to the wall Adjust the position of the antennas for optimal reception Position the antennas as far as possible from a TV VCR or other radiation source to prevent unwanted noise For better FM stereo reception connect external FM antenna Step 2 Connecting the speakers Connect the speaker wires to the SPEAKERS terminals right speaker to R and left speaker to L coloured marked wire to and black unmarked wire to Fully insert the stripped portion of the speaker wire into the terminal as shown Notes Ensure that the speaker cables are correctly connected Improper connections may damage the system due to short circuit Do not connect more than one speaker to any one pair of speaker terminals Step 3 Connecting to PC page 3 P5 Use the supplied USB cable to connect the system to your personal computer s USB port After installed the USB PC LINK application software onto your PC you are able to playback your music collection via the system refer to USB PC Link Step 4 Connecting the AC power cord mM TIC TJ I COC CN coe LI LIVI II A bad nn IT Lt Ca FIL
25. r Disc player DVD player or CD recorder gt If the connecting device has only a a single audio out terminal connect it to the AUX CDR IN left terminal Alternatively you can use a single to double cinch cable but the output sounds still remain mono Press AUX repeatedly Select HL when connecting to a TV VCR or Laser Disc player gt Select HL L TR when connecting to a CD recorder or DVD player Press PLAY on the connected device to start playback Notes All the sound control features DSC VEC for example are available for selection Always refer to the owner s manual of the other equipment for complete connection and use details 23 Specifications 24 AMPLIFIER Output power Signal to noise ratio Frequency response Input sensitivity AUX In CDR In Output Speakers Headphones 1 6 Q 60 Hz 12 5 kHz 10 THD DISC PLAYER Programmable tracks Frequency response Signal to noise ratio Channel separation USB Frequency response Signal to noise ratio Channel separation Total harmonic distortion TUNER FM wave range MW wave range Number of presets Antenna FM AM SPEAKERS System Impedance Woofer Tweeter Dimensions w x h x d Weight 2 x 100 W MPO 2 x 50 W RMS gt 75 dBA IEC 50 20000 Hz 3 dB 500 mV 1V gt 60 32 Q 1000 Q 40 20 20000 Hz 3 dB gt 76 dBA gt 60 dB 1 kHz 20 20000 Hz 3 dB gt 75
26. resetting radio stations seere 19 Using the Plug and Play 19 Automatic presetting esere 19 Manual presetting cccssesesssessssesssesseees 19 Selecting a preset radio station 20 Deleting a preset radio station 20 A IAEA lt 20 Scrolling through RDS information 20 Setting the RDS CIOCK 20 NEW Sarandi ds 21 Switching on NEW S function 21 Timer O perations Timer setn aaa 22 Activating D eactivating the timer 22 Checking the timer Setting 22 Temporarily deactivating the wake up UCP 23 Sleep timer setting ie 23 Other Connection Listening to an external Source 23 Specifications 24 Troubleshooting 25 This product complies with the radio interference requirements of the European Community Refer to the type plate on the rear or bottom of the system for identification and supply ratings For users in the U K please follow the instructions on page 2 Supplied accessories page 3 P1 USB PC LINK software installer CD ROM USB cable Remote control and two AA batteries AM loop antenna FM wire antenna AC power cord Environmental information All unnecessary packaging has been omitted We have tried to make the packaging easy to separate into three materials cardboard box polystyrene foa
27. s displayed OR In Eco Power standby standby mode press and hold gt T on the main unit until AUTO INSTALL PRESS PLAY is displayed e Tuner O perations Press gt II on the main unit to start installation 3 INSTALL TUNER is displayed gt AI previously stored radio stations will be replaced gt Once completed the last tuned radio station or the first available RDS station will be played If the first preset is a RDS station it will proceed to n the RDS clock ThI TI WETE LINII FAL l is displayed followed by i Li and SEHRE H RIS TIME gt When RDS time is read 15 TIME is displayed and the current time will be stored If RDS station does not transmit RDS time within 90 seconds MO RIS TIME is displayed and the programme will exit automatically Automatic presetting You can start the automatic presetting from a selected preset number In tuner mode press Ml or Pl to select a preset number Press and hold PROGRAM PROG until Hi LI is displayed gt If a radio station has been stored in one of the presets it will not be stored again under another preset number gt If no preset number is selected automatic preset will begin from preset 1 and all your former presets will be overridden You can choose to store only the favourite radio stations Tune to your desired radio station refer to Tuning to radio stations
28. s between FM and MW band AUX toggles between AUX and CDR mode Connect the USB cable between the system and PCs USB port A i I Plug in the headphones jack The speakers output will be cancelled Functional Overview Control buttons available on the remote only REPEAT Repeats a track disc all discs all programmed tracks 23 SLEEP Sets the sleep timer function CLOCK Enters clock setting mode Switches to clock display mode 25 SNOOZE Temporarily deactivate the wake up timer DIM Selects different levels of brightness for display panel MUTE Mutes or restores the volume TIMER Enters timer setting mode Displays the timer setting TIMER ON OFF Turns on off the timer function SHUFFLE Turns on off the random play mode DISPLAY Displays disc remaining playback time Switches to Eco Power standby mode Switches to standby mode Press and hold the button for more than two seconds speaker right AM loop antenna a Y FM wire antenna speaker left WARNING Use only the supplied speakers The combination of the main unit and speakers provide the best sound Using other speakers can damage the unit and sound quality will be negatively affected Never make or change connections with the
29. tting gt The timer will always be switched on after it has been set gt A icon remains on the display It indicates the timer is activated TII wey ILA yn AN AN MAM MAMI IN INT AN AN 22 At the preset time the selected sound source will be played for 30 minutes before it switches to Eco Power standby mode if no button is being pressed within the time frame gt CD playing the first track of the last selected disc or programmed track if programme mode is active If the last selected disc tray is empty it will switch to the next available disc If all the disc trays are not available it will switch to Tuner mode gt TUNER playing the last tuned radio station gt USB PC LINK playing the last selected playlist If the connection fails it will switch to Tuner mode Refer to USB PC Link for proper connection and setup before use Activating Deactivating the timer Press TIMER ON OFF on the remote to turn off the timer or turn on to the last setting again gt If activated the timer information will display for a few seconds then the system resumes to the last active source or stays in standby mode gt f deactivated LiF is displayed N ote The system will exit timer setting mode if no button is pressed within 90 seconds Checking the timer setting Press TIMER on the remote The timer information will display for a few seconds then the system resumes
30. ve to exit Tuner mode before selecting NEWS function Before you activate the NEWS feature ensure that the first five presets have RDS stations The NEWS works only once for each activation To cancel NEW S function O Press NEW SRDS again or switch the system to tuner mode OR During news bulletin press any other available source keys to execute the relevant source mode 21 Timer Operations Timer setting The system can switch on to CD TUNER or USB PC LINK mode automatically at a preset time serving as an alarm to wake you up IMPORTANT Before setting the timer ensure that the clock is set correctly The volume of the timer will increase gradually to the last tuned volume level If the last tuned volume level is too low the set will then increase to a predetermined minimum audible level O CD TUNER USB PC LINK 00 00 12 00AM 00 00 12 00AM 0 0 Press and hold TIMER on the remote until A icon starts flashing OR Press and hold CLOCK TIMER on the main unit until SELELI CLOCK OR TIMER is displayed Then press Pl to change the display to T IMER and press CLOCKSTIMER again to confirm Press CD or TUNER or USB PC LINK to select the wake up source ED CI 060008 TUNER gt USB PO LINK LSE Press 44 or P gt for hours and ME or P for minutes repeatedly to set the wake up time Press TIMER or CLOCKSTIMER to store the se
Download Pdf Manuals
Related Search