Home

Clarion DXZ845MC CD Player

1. This product includes technology owned by Microsoft Corporation and cannot be used or distributed without a license from MSLGP MANUFACTURED 28 SERIAL No Clarion Co Ltd PET MADE IN CHINA 2 Driving on extremely bumpy roads which cause severe vibration may cause the sound to skip 3 This unit uses a precision mechanism Even in the event that trouble arises never open the case disassemble the unit or lubricate the ro tating parts ACAUTION USE OF CONTROLS ADJUSTMENTS OR PER FORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE THE COMPACT DISC PLAYER and MINI DISC PLAYER SHOULD NOT BE ADJUSTED OR RE PAIRED BY ANYONE EXCEPT PROPERLY QUALIFIED SERVICE PERSONNEL CHANGES OR MODIFICATIONS NOT EX PRESSLY APPROVED BY THE MANUFAC TURER FOR COMPLIANCE COULD VOID THE USER S AUTHORITY TO OPERATE THE EQUIP MENT INFORMATION FOR USERS CHANGES OR MODIFICATIONS TO THIS PROD UCT NOT APPROVED BY THE MANUFAC TURER WILL VOID THE WARRANTY AND WILL VIOLATE FCC APPROVAL Z Bottom View of Source Unit DXZ845MC 3 Sloping Console This unit uses sloping console to make large Screen displays possible When you use the sloping console be sure to close it ACAUTION BE CAREFUL NOT TO GET YOUR FINGERS CAUGHT WHEN OPENING AND CLOSING THE SLOPING CONSOLE 1 For safety s sake always close the SLOPING CO
2. 4 When the adjustment is complete press the A M button several times until the function mode is reached the balance Press the A M button and select BAL ANCE 0 2 Turning the ROTARY knob clockwise em phasizes the sound from the right speaker turning it counterclockwise emphasizes the sound from the left speaker The factory default setting is BALANCE 0 Adjustment range L13 to R13 3 When the adjustment is complete press the A M button several times until the function mode is reached the fader Press the A M button and select FADER 0 2 Turning the ROTARY knob clockwise em phasizes the sound from the front speakers turning it counterclockwise emphasizes the sound from the rear speakers The factory default setting is FADER 0 Ad justment range F12 to R12 3 When the adjustment is complete press the A M button several times until the function mode is reached 14 DXZ845MC Radio Operations FM reception For enhanced FM performance the MAGITUNEES tuner includes signal actuated stereo control Enhanced Multi AGC Impulse noise reduction curcuits and Multipath noise reduction circuits Listening to the radio 1 Press the FNC button and select the radio mode The frequency appears in the display 2 Press the BND button and select the radio band Each time the button is pressed the radio reception band changes in the following order
3. duro diluidor de pintura benceno alcohol etc Para la suciedad enlever la salet tenace appliquer un peu d eau froide ou tiede sur resistente aplique un poco de agua fr a o caliente a un pafio suave y un chiffon doux et essuyer doucement la salet frote suavemente la parte sucia 1 Ne pas ouvrir le coffret ll n y a pas de pi ces r parables par 1 No abra la caja En el interior no hay piezas que pueda reparar el l utilisateur l int rieur de l appareil Si un objet est tomb dans usuario Si dentro de la unidad entra algo durante la instalaci n IMPORTANT Improper installation may cause damage to your unit or car If you do not have the appropriate experience consult a qualified installer IMPORTANT Une installation incorrecte peut endommager l appareil ou le v hicule Si l on ne poss de pas fes connaissances requises consulter un installateur qualifi Couper le fil du ch ssis annule la garantie IMPORTANTE La instalaci n inapropiada puede causar da os en su unidad o su autom vil Si usted no posee la experiencia apropiada consulte a un instalador cualificado El corte de los conductores de puesta a masa carrocer a anular la garant a Cutting chassis wire leads voids the warranty Clarion Co Ltd 281 0624 00 2003 8 Clarion CLARION LIMITED WARRANTY For USA and Canada only If purchased from an authorized Clarion dealer this product is warranted against all defects in material
4. Play list play is not performed File name or extension is not correct Use alphanumeric ASCII characters for MP3 WMA file name Use M3U for the file extension of a play list DXZ845MC 33 10 ERROR DISPLAYS If an error occurs one of the following displays is displayed Take the measures described below to eliminate the problem CD MP3 WMA Error Display ERROR 2 A DISC is caught inside the CD deck and is not ejected Measure This is a failure of CD decks mechanism and consult your store of purchase ERROR 3 A DISC cannot be played due to scratches etc Replace with a non scratched non warped disc ERROR 6 A DISC is loaded upside down inside the CD deck and does not play Eject the disc then reload it properly M CATCHER ERROR 7 The format of the flash memory is damaged Execute ALL ERASE on the flash memory and the problem is solved ERROR 8 There is a failure with the flash memory Turn POWER ACC off and then turn it on again and the problem is solved If not solved executed ALL ERASE on the flash memory and the problem is solved ERROR 9 An error during recording scratch on the disc or error due to sound skips Turn POWER ACC off and then turn it on again or eject the CD The problem is solved AMP GUARD The speaker protection circuit is operating During this operation if any volume operation is performed the displ
5. V ae SM N 3A19S pHOM 299 ZL L SHJOM 19QUIBY 28 92 P A OMAN OIPEY PHOM LLL 08 SSe GZ 1 Std GOL DISSVTO YOY 21558 pZ jeuueu v8l 1 SOL snis A dey asse yoy 31sse 3 EZ Jouueu 4NI OSL MON 401 dey sKepo gv 1204 22 wre no 641 Bi quioolg SOL ouela SUH dey zv yooy UJSPON LZ ZLE SMAN SUIPY3H NNO vOL v 894 Sv SUH YOY OZ puuey epueos 891 oipey IL puuey XOd ZOL Ioueds3 ZZ NOS 21552 pp ypoy 2829 23 Li yel ue ueuiy L94 19 NIA xi dog une spejeg nos MOS S WOPsiM GOL vrl SHH une OZ Ss epoL zy WAWAATIYY 51 y9L euedsiH pay Zt SUH 994 Ob SHY snus 191 opunw 988 snuis 091 AOL OINVISIH aseomoys eneds Q SOG AY JO 1598 YI 6 SNUS GGL SpM 66 ysog sAempeoig 9 508 y jo 3599 yl 8 19 125 861 aby 96 99 sse4bonig LE SQL 9Y1 1598 L 52165 7 Olpe 9S4 oipey aunjuaapy NIO ASMA PHOM SG spiepuels G9 sjuno 9E SO9 sOS 94 jo 3599 eu S oipey 39v Uorsiapasds vel SUH UENSHYD v6 zzepuyoous 9 21 SE e o y Juauuureyajuy jy 291 YSN suods z jedso9 g6 zze reroduaquo
6. ATTENTION Lorsque vous raccordez un ampli de puissance externe faites bien attention mettre correctement l amplificateur la masse sur le ch ssis de la voiture Sinon vous risquez d endommager gravement l appareil pilote amplificador externo Para eliminar los cortocircuitos de audio no quite los casquillos protectores de los cables RCA no utiliza los PRECAUCI N Cuando conecte un amplificador de potencia externo cerci rese de ponerlo adecuadamente a masa en el chasis de su autom vil Si no lo hiciese la unidad fuente podr a da arse seriamente To external unit m DXZ845 M C Vers un externe A un unidad externo E DXZ945MP DXZ745MP To wireless head phone UNIT Dm Vers le casque sans til A la unidad de auriculares inal mbricos Antenna Antenne Antenna Antenne Antena Antena ISS O E CeNET input f CeNET input t Entr e CeNET Entr e CeNET Entrada de CeNET Entrada de CeNET 600909 il DXZ645MP E DXZ545MP E DXZ445 0000 Antenna Antenna Antenne Antenna Antenne Antena Antenne Antena Antena IESUS 2 0 8 8 CeNET input input Entr e Entr e CeNET Entrada de CeNET Entr e CeNET Entrada de CeNET Entrada de CeNET 16 Pin Connector Extension Lead attached to the source unit Blue White wire Amplifier turn on lead Fil bleu b
7. B Outer escutcheon TN Ecusson ext rieur I Pieza ornamental exterior Figure 12 Figure 12 Figura 12 ED GI ED 5 1 Lors de la d pose de l appareil pilote d monter dans l ordre inverse de la Section 3 INSTALLATION DE L APPAREIL PILOTE 2 D poser le clavier de commande amovible DCP Pour les instructions sur le retrait du clavier de commande amovible DCP se r f rer au mode d emploi 3 Presser l cusson ext rieur vers le haut et le retirer Figure 12 Ins rer et verrouiller les plaques crochet Figure 13 5 Tirer sur les plaques crochet pour retirer l appareil pilote 2 Hook plate 2 Plaque crochet 2 Placa de enganche 1 Para desmontar la unidad fuente realice el procedimiento inverso al de la Secci n 3 INSTALACI N DE LA UNIDAD FUENTE 2 Desmonte el panel de contro desmontable DCP Para instrucciones sobre c mo desmontar el DCP consulte el manual de instrucciones 3 Presione la pieza ornamental exterior hacia afuera y extr igala Figura 12 4 Inserte y bloquee las placas de enganche Figura 13 5 Tire de las placas de enganche para extraer la unidad fuente Figure 13 Figure 13 Figura 13 CAUTIONS ON WIRING PR CAUTIONS AU SUJET DES CONNEXIONS PRECAUCIONES PARA LA CONEXI N DE CABLES W 1 Be sure to turn the power off when wiring 2 Be particularly careful where you route the wires Keep them well away from the engine exhaust pipe et
8. Voir x Utilice un cable prolongador CeNET de menos de 20 m de longitud incluyendo el adaptador en Y CCA 519 Nota El modelo DXZ445 no posee terminal 2 ZONE OUTPUT Refi rase a k This source unit can control a total of 2 changers except 2 DVD changers exist in the system Lapparell pilote est capable de commander 2 changeurs au total en plus des 2 changeurs de DVD qui existent dans le Systeme Esta unidad fuente puede controlar en total 2 cambiadores excepto los 2 cambiadores de discos DVD del sistema Espa ol D Source unit CeNET extension cable Y adapter sold separately 1 DVD changer gt 4 Channel power amplifier Front speakers Rear speakers desa Subwoofer with amplifier External unit Wireless head phone unit Appareil pilote g C ble d extension CeNET Adaptateur Y vendu s par ment Changeur de CD Changeur de DVD C ble de rallonge RCA vendu s par ment Amplif cateur de puissance 4 canaux Haut parleurs avant Haut parleurs arri re t Subwoofer avec amplificateur Appareil externe Casque sans fil Unidad fuente 2 Cable prolongador CeNET Adaptador en Y vendido aparte Cambiador de discos compactos Cambiador de DVD Cable de extensi n RCA O Amplificador de potencia de 4 canales Altavoces delanteros 9 Altavoces tra
9. erase only one file FOLDER ERASE erase the whole folder ALL ERASE erase all the contents of the flash memory 1 Press the FNC button to select the M CATCHER mode 2 Each time you press the ERASE button the display switches in the following order FILE ERASE gt FLD ERASE gt Normal mode Notes When a selected file or folder is erased the ap proximate recordable time is shown the record able time shown varies according to the set re cording mode Do not turn off the power to the unit or switch the operation mode during erasing recordings e FILE ERASE 1 Press the FNC button to select the M CATCHER mode 2 Play back a file to be erased and press the ERASE button to select FILE ERASE 3 While FILE ERASE is showing on the dis play press and hold the gt button for 2 seconds or longer The title display shows ERASING as the file currently being played back is erased FOLDER ERASE 1 Press the FNC button to select the M CATCHER mode 2 Play back any track of the folder to be erased and press the ERASE button to se lect FLD ERASE 3 While FLD ERASE is showing on the dis play press and hold the I button for 2 seconds or longer The title display shows ERASING as the folder currently being played back is erased DXZ845MC 21 MUSIC CATCHER Operations ALL ERASE 1 Press the FNC button to select the M CAT
10. 1 Press and hold the T button for 1 second or longer to switch to the adjustment selection display 2 Press the lt d or gt button to select SUB W LPF 3 Turning the ROTARY knob clockwise or counterclockwise to select the setting Each time you turning the ROTARY knob the set ting changes in the following order THRGH gt 50Hz gt 80Hz gt 120Hz 4 Press the T button to return to the previous mode DXZ845MC 25 Operations Common to Each Mode Setting the external amplifier UThe factory default setting is OFF 1 Press and hold the T button for 1 second or longer to switch to the adjustment selection display 2 Press the lt d or P gt button and select AMP CANCEL 3 Turning the ROTARY knob clockwise or counterclockwise and select ON or OFF ON Use with connected AMP O OFF Use with inside AMP 4 Press the T button to return to the previous mode Selecting AUX IN sensitivity Make the following settings to select the sensi tivity when sounds from external devices con nected to this unit are difficult to hear even after adjusting the volume UThe factory default setting is MID 1 Press and hold the T button for 1 second or longer to switch to the adjustment selection display 2 Press the lt d or gt button to select AUX SENS 3 Turning the ROTARY knob clockwise or counterclockwise as needed and select from LOW M
11. FM1 gt FM2 gt FM3 AM gt FM1 3 Press the lt d or P gt button to tune in the desired station Tuning There are 3 types of tuning mode available seek tuning manual tuning and preset tuning Seek tuning 1 Press the BND button and select the de sired band FM or AM Ulf MANU is lit in the display press and hold the BND button for 1 second or longer MANU in the display goes off and seek tun ing is now available 2 Press the lt d or gt button to automatically Seek a station When the P gt button is pressed the station is sought in the direction of higher frequencies if the lt d button is pressed the station is sought in the direction of lower frequencies Manual tuning There are 2 ways available Quick tuning and step tuning When you are in the step tuning mode the fre quency changes one step at a time In the quick tuning mode you can quickly tune the desired frequency 1 Press the BND button and select the de sired band FM or AM Ulf MANU is not lit in the display press and hold the BND button for 1 second or longer MANU is lit in the display and manual tuning is now available Radio Operations 2 Tune into a station e Quick tuning Press and hold the lt d or gt button for 1 Second or longer to tune in a station O Step tuning Press the lt d or gt button to manually tune in a station Recalling a preset station A t
12. MUTE CS pis SCN 25 25 5 RDM RPT LL L Inserting the Batteries 1 Turn the remote control unit over then slide the rear cover in the direction of the arrow AA SUM 3 IECR 6 1 5V 2 Insert the AA SUM 3 IECR 6 1 5V batteries Batteries that came with the remote control unit facing in the directions shown in the figure then close the rear cover Notes LA Using batteries improperly can cause them to explode Take note of the following points When replacing batteries replace both batteries with new ones Do not short circuit disassemble or heat batteries 2 Do not dispose of batteries into fire or flames LA Dispose of spent batteries properly V Rear cover 10 DXZ845MC Functions of Remote Control Unit Buttons CD changer TV DVD changer Switches among radio SIRIUS tuner CD MP3 MC CD changer DVD changer TV and AUX CD MP3 Radio SIRIUS M CATCHER FUNC BAND Switches reception band Plays the first track Top play Moves the next disc in increasing order Switches reception band 4 w Increases and decreases volume in all modes lt 4 gt gt Moves preset channels up and down Moves tracks up and down When pressed and held for 1 second or longer Fast forward fast backward Moves preset channels up and down lli No function Switches between playback and p
13. Not used Fil bleu fil de l antenne lectrique 59 Insulate each wire OGreen Black Vert noir O Verde negro Conductor azul conductor para la antena motorizada ALTAVOZ DE SUBGRAVES IZQUIERDA Violado Blanco inutilis ui isoler chaque fil TH Entrada auxiliar AUX INPUT del canal derecho Rojo No se utiliza Connect it to the car power supply terminal for the antenna Entrada auxiliar AUX INPUT del canal izquierdo Blanco A sle todos los conductores Le Gone la borne d alimentation de l antenne lectrique SALIDA DE ZONA 2 DERECHO VERDE Rojo de la voiture SALIDA DE ZONA 2 IZQUIERDO VERDE Blanco Con ctelo al terminal de alimentaci n de la antena ED ED f SYSTEM EXAMPLE EXEMPLE DE SYSTEME EJEMPLO DESISTEMA E Example of the system using an external amplifier Audio Visual Exemple de syst me utilisant un amplificateur ext rieur audio visuel B Ejemplo de sistema utilizando un amplificador externo audiovisual DXZ045MP DXZ745MP m DXZ845MC DXZ645MP DXZ545MP DXZ445 Note Use a CeNET extension cable that is less than 20 m in length including the Y adapter CCA 519 Remarque Utiliser un c ble d extension CeNET inf rieur 20 m de long en comptant aussi l adaptateur Y CCA 519 Note DXZ445 does not have a 2 ZONE OUTPUT terminal Refer to x Remarque Nota Le DX2445 ne poss de pas de borne 2 ZONE OUTPUT
14. Press the HI button Press the lt d or P gt button to select the hour or the minute Turning the ROTARY knob clockwise or counterclockwise to set the correct time The clock is displayed in 12 hour format Press the p II button to store the time into memory Press the T button to return to the previous mode Note You cannot set the clock when it is displayed with only the ignition on If you drain or remove the car s battery or take out this unit the clock is re set While setting the clock if another button or operation is selected the clock set mode is can celed Turning the screen saver function on or off This unit is provided with the screen saver func tion which allows you to show various kinds of patterns and characters in the Operation Status indication area of the display You can turn on and off this function If the button operation is performed with the Screen saver function on the operation display corresponding to the button operation is shown for about 30 seconds and the display returns to the screen saver display The factory default setting is ON 1 Press and hold the T button for 1 second or longer to switch to the adjustment selection display Press the lt d or gt button to select SCRN SVR 3 Press the H button Turning the ROTARY knob clockwise or counterclockwise to select the setting Each time you turning the ROTARY knob the set ting
15. Disc random play The disc random play selects and plays indi vidual tracks or discs automatically in no par ticular order This function continues automati cally until it is cancelled 1 Press and hold the RDM button for 1 sec ond or longer DISC and RDM light in the display and disc random play starts 2 To cancel disc random play press the RDM button again DISC and RDM go off from the display and normal play resumes from the current track DXZ845MC 29 TV Operations TV tuner functions When an optional TV tuner is connected through the CeNET cable this unit controls all TV tuner functions To watch TV requires a TV tuner and monitor Press the FNC button and select the TV mode 2 Press the BND button to select the desired TV band TV1 or TV2 Each time the button is pressed the input selection toggles be tween TV1 and TV2 3 Press the lt d or gt button to tune in the desired TV station Watching a video The TV tuner has a VTR input terminal to which 1 external device can be connected Connect a 12 V video cassette player VCP or video cas sette recorder VCR to the TV tuner input termi nal 1 Press the p II button to select VTR 2 To return to the TV broadcast press the 511 button Tuning There are 3 types of tuning mode available Seek tuning manual tuning and preset tuning Seek tuning 1 Press the BND button and select the de
16. H y a diff rent type de porte fusible La borne du c t batterie ne doit pas toucher d autres pi ces m talliques 4 Connecter le cable d extension CeNET compl tement et solidement jusqu ce qu il soit verrouill Pour tirer le c ble d extension CeNET tenir la partie coulissante du capuchon et tirer vers vous AB Pour tendre ou d river le c ble d extension CeNET utiliser le c ble d extension CCA 520 2 5 m 8 pieds ou CCA 521 0 6m 2 pieds ou fadaptateur Y CCA 519 ces cables sont vendus s par ment Utiliser les c bles d extension CeNET fabriqu s par Clarion 5 Sile fusible d alimentation principale de la voiture est de 15 A ou moins achetez un c ble automobile qui peut supporter 15 A et alimenter cet appareil directement partir de la batterie et assurer que l appareil fonctionnera normalement Notez qu un fusible doit tre install une distance de moins 30 cm de borne de la batterie pour viter tout accident A Fuse Fusible Fuse case Fusible fusible Caja de fusible v Figure 14 Figure 14 Figura 14 Wi 1 Antes de hacer las conexiones aseg rese de desconectar la alimentaci n de la unidad 2 Sea especialmente cuidadoso al dirigir y fijar los cables mant ngalos alejados del motor tubo de escape etc El calor puede da ar los cables 3 Si el fusible se quema revise las conexiones Si est quemado reemplace el fusible por otro nuevo con el mismo valor de amperaje que el
17. MP3 WMA disc only 6 DXZ845MC This functions as the ERASE button in the M CATCHER mode Each time you press the button the function switches in the following order FILE ERASE 3 FLD ERASE gt Normal mode Press and hold the button for 2 seconds or longer and the unit enters the ALL ERASE mode RDM button Perform random play while in the CD MP3 MC mode Press and hold the button for 1 second or longer to perform folder random play while in the MP3 WMA disc MC mode RPT button Repeat play while in the CD MP3 MC mode Press and hold the button for 1 second or longer to perform folder repeat play while in the MP3 WMA disc MC mode SCN button Perform scan play for 10 seconds of each track while in the CD MP3 MC mode Press and hold the button for 1 second or longer to perform folder scan play while in the MP3 WMA disc MC mode gt I button Play or pause a CD while in the CD MP3 MC mode e Press and hold the I button for 2 seconds or longer after selecting the ERASE mode and the track is erased lt q gt buttons Select a station while in the radio mode or select a track when listening to a CD MP3 MC mode These buttons are used to make various settings Press and hold the button for 1 second or longer to switch the fast forward fast backward REC button Press the button during CD playback and the track currently being played back is recorded onto MC TRACK
18. Noir Blanc Derecho Black wa Grad lead gt SUBWOOFER DROIT Violet Rouge OGray Black Gris noir Gris negro Fil noir fil de terre 8 SUBWOOFER GAUCHE Violet Blanc Conductor negro Conductor de puesta a masa E ENTREE AUX droite Rouge NM r i ENTREE AUX gauche Blanc A eilane Oplands O AR 2 ZONE OUTPUT DROIT VERT rouge onnect to vehicle chassis ground Gauche Brancher la terre du chassis du v hicule 2 ZONE OUTPUT GAUCHE VERT blanc Izquierdo Con ctelo a una parte met lica del chasis del veh culo OWhite Black Blanc noir OBlanco negro Orange White wire Illumination lead Fil orange blanc fil d clairage G Purple amp Pourpre OP rpura Conductor anaranjado blanco conductor de iluminaci n TP Descripci n INS _ Connect it to the car power supply terminal for illumination e DELANTERO DERECHO Gris Rojo OPurple Black Pourpre noir OP rpura negro Le connecter la borne d alimentation de l clairage DELANTERO IZQUIERDA Gris Blanco e la voiture id i ne TRASERO DERECHO Negro Rojo f zon ctelo al terminal de alimentaci n del autom vil para TRASERO IZQUIERDA Negro Blanco Gy Green Vert Verde amp TRASERO DERECHO ALTAVOZ DE SUBGRAVES DERECHO Negro Rojo e TRASERO IZQUIERDA ALTAVOZ DE SUBGRAVES IZQUIERDA Negro Blanco ALTAVOZ DE SUBGRAVES DERECHO Violado Rojo Blue wire Auto antenna lead
19. forms on the optical parts of the player do not use the player for about one hour The conden sation will disappear naturally allowing normal operation This equipment has been tested and found to com ply with the limits for a Class B digital device pur suant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a resi dential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communica tions However there is no guarantee that inter ference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be de termined by turning the equipment off and on the user is encouraged to consult the dealer or an ex perienced radio TV technician for help clarion 12V GROUND AM 530 1710kHz FM 87 9 107 9MHz THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS 1 THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE AND 2 THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION THIS PRODUCTION COMPLIES WITH DHHS RULES 21 CFR SUBCHAPTER J APPLICABLE AT DATE OF MANUFACTURE CLARION CO LTD 50 KAMITODA TODA SHI SAITAMA KEN JAPAN
20. REC Press and hold the button for 2 seconds or longer during CD playback and all tracks are recorded onto MC DISC REC BND button Switch the band or seek tuning or manual tuning while in the radio mode Play a first track while in the CD MP3 MC mode Names of the Buttons and their Functions A M button Use the button to switch to the audio mode SW VOL bass treble balance fader Press and hold for 1 second or longer to turn on or off the MAGNA BASS EXTENED FNC button Press the button to turn on the power Press and hold the button for 1second or longer to turn off the power Switches the operation mode among the radio mode etc CD SLOT CD insertion slot Major Button Operations When External Equipment is Connected to This Unit e When the CD DVD changer is connected U For details see the section CD changer opera tions For the DVD changer refer to the Owner s Manual provided with the DVD changer D button When the button is pressed and held switches the user titles or track titles etc while in the CD changer mode T button Use the button to input a title in the CD changer mode Use the button to scroll the title during CD text play UP DN buttons Select the disc RDM button Perform random play Also perform disc random play when the button is pressed and held RPT button Perform repeat play When this button is pressed and held disc repea
21. Z9 xi guno 2 XW dog oipey KASIA 19 SM NdS3 121 16 2ze une 19 suno s epo pE ynpy z Aausig olpey OG AJOMJ9N NASA OZ L sang O6 ZZe 21556 09 SUH guno og SUH Ob dol L PELLIT EIE 515045 s S Form P sniais is AS 511015 4 COMMERCIAL FREE SIRIUS JAZZ amp SIRIUS R amp B URBRN ACTIVATE NOW 20 R WANT TO LEAVE YOUR CAR SIRIUS SPOR GET READY FOR 100 CHANNELS OF THE BEST IN CAR ENTERTAINMENT You ve just purchased a Sirius Satellite Radio receiver that s going to plug you into 60 original music channels from today s hits to R amp B oldies to classical masterpieces From authentic country and real bluegrass to cool jazz hot latin reggae and rock Plus 40 channels of world class sports news and entertainment like ESPN Radio Disney E Entertainment Radio CNBC Fox News and Discovery Radio At Sirius the emphasis is on the music and entertainment you want From now on it s just you the road and the music ONLY FROM SIRIUS 100 channels of digital entertainment coast to coast 60 original music channels all commercial free e 40 world class sports news and entertainment channels e S gt PLEX technology for superior sound resolution SIRIUS Ts ES ENTERTAINHENT SIRIUS SIRIUS POP QOUNIRT EXPERIENCE SIRIUS IN TWO SIMPLE STEPS If you haven t already activated your Sirius recei
22. as follows Mode Number of titles CD mode 50 titles TV mode 20 titles Radio mode 30 titles CD changer mode Number of titles DCZ625 connected 100 titles CDC655Tz connected 100 titles CDC1255z connected 50 titles 1 Press the FNC button to select the mode you want to enter a title Radio CD CD changer or TV 2 Select and play a CD in the CD changer or tune in to a Radio TV station for which you want to enter the title Press the D button and display the main 4 Press the T button 5 Press the lt d or gt button to move the cursor Operations Common to Each Mode 6 Press the D button to select a character Each time you press the D button the char acter changes in the following order Capital letters Small letters Numbers and Symbols Umlaut gt Capital letters 7 Turning the ROTARY knob to select the de sired character 8 Repeat steps 5 to 7 to enter up to 10 charac ters for the title 9 Press and hold the I button for 2 sec onds or longer to store the title into memory and cancel title input mode Clearing titles 1 Select and play a CD in the CD changer or tune in to a Radio TV station for which you want to clear the title 2 Press the D button and display the main 3 Press the T button The display switches to the title input display 4 Press the BND button 5 Press and hold the I button for 2 sec onds or longer to clea
23. back and DISC REC to record all tracks on the CD e TRACK REC 1 2 Press the FNC button to select the CD MP3 mode Play back a track to be recorded and press the REC button Then the indicator on the display and the REC button blink TRACK shows on the title display for 2 seconds and recording starts When recording is complete the REC indica tor goes off and REC DONE shows on the display for 2 seconds DISC REC 1 Press the FNC button to select the CD MP3 mode Play back a CD to be recorded and press and hold the REC button for 2 seconds or longer Then the REC indicator on the dis play and the REC button blink DISC REC shows on the display for 2 seconds and re cording starts When recording is complete the REC indica tor goes off and REC DONE shows on the display for 2 seconds Canceling recording i To suspend recording press the REC but ton again Then recording is canceled The display shows CANCELED for 2 sec onds and then the playback of the CD contin ues Notes Recording also can be canceled by pressing the FNC 4 or ISR button When recording is canceled the file that has been recorded incompletely is deleted Erasing operation ERASE function Erasing recordings made using MUSIC CATCHER is performed in the M CATCHER mode and the following 3 erasing modes are available FILE ERASE
24. changes in the following order OFF gt ON gt MESSAGE Press the T button to return to the previous mode 24 DXZ845MC Entering MESSAGE INFORMATION When the use of the message is selected for the screen saver setting you can change the con tents of the message UUp to 30 characters can be entered UThe factory default setting is Welcome to Clarion 1 Press and hold the T button for 1 second or longer to switch to the adjustment selection display 2 Press the lt d or gt button to select MSG INPUT 3 3 Press the gt button 4 Press the lt d or P gt button to move the cursor 5 Press the D button to select a character Each time you press the D button the char acter changes in the following orders Capital letters Small letters Numbers and Symbols Umlaut gt Capital letters 6 Turning the ROTARY knob to select the de sired character 7 Repeat step 4 to 6 to enter up to 30 charac ters for message 8 Press and hold the I button for 2 sec onds or longer to store the message in memory and cancel input message mode Press the BND button can cancel the input message Then press and hold the p II but ton for 2 seconds or longer to store the mes sage and the message return to default set ting 9 Press the T button to return to the previous mode Message display When the unit is powered on or off a message is displayed The user can turn this messa
25. estas instrucciones Antes de comenzar cerci rese de desconec tar el terminal de la bater a Esto es para evitar cortocircuitos durante la instalaci n Car battery Batterie de voiture Bater a del autom vil Figure 1 Figure 1 Figura 1 CAUTIONS ON INSTALLATION PR CAUTIONS AU SUJET DE L INSTALLATION PRECAUCIONES PARA LA INSTALACI N 1 Prepare all articles necessary for installing the source unit before 1 Avant de commencer pr parer toutes les pi ces n cessaires pour starting installer l appareil pilote 2 Install the unit within 30 of the horizontal plane Figure 2 2 Installer l appareil avec un angle inf rieur 30 par rapport Pho 3 If you have to do any work on the car body such as drilling holes rizontal Figure 2 consult your car dealer beforehand 3 S il est n cessaire d effectuer certains travaux sur la carrosserie comme percer des trous consulter d abord votre concessionnaire automobile 4 Utiliser les vis fournies pour l installation L utilisation d autres vis peut causer des dommages Figure 3 4 Use the enclosed screws for installation Using other screws can cause damage Figure 3 Chassis Ch ssis Chasis Max 30 30 max M x 30 Figure 2 Figure 2 Figura 2 3 1 Antes de comenzar prepare todos los elementos necesarios para instalar la unidad fuente 2 Instale la unidad con un ngulo de 30 sobre el plano horizontal Figura
26. original Figura 14 Nota Existen varios tipos de portafusibles No permita que el terminal del lado de la bater a toque otras partes met licas 4 Conecte el cable prolongador CeNET completa y seguramente hasta que chasquee Para desconectar el cable sujete la parte de la tapa deslizable y tire hacia usted Para prolongar o ramificar el cable prolongador CeNET utilice un cable prolongador CCA 520 2 5 m o CCA 521 0 6 m o un adaptador en Y CCA 519 vendidos aparte Utilice un cable prolongador CeNET fabricado por Clarion 5 Cuando el fusible de alimentaci n principal del autom vil sea de 15 A o menos adquiera un cable para autom vil que pueda resistir 15 A y alimente esta unidad directamente desde la bater a para cerciorarse de que pueda funcionar normalmente Tenga en cuenta que para evitar accidentes deber instalar un fusible en al cable que va a terminales de la bater a a una distancia no superior a 30 cm ED 6 WIRE CONNECTIONS CONNECTIQUE CONEXI N DE CABLES To external amplifier mean O To eliminate audio short circuits do not remove the caps of unused RCA cables CAUTION Please make sure when connecting external power amplifier that you properly to the car chassis ground the amplifier If this is not done severe damage to the source unit may O happen Vers un amplificateur externe Pour Supprimer les courts circuits audio ne pas retirer les capuchons des c bles RCA non utilis s
27. sired TV band TV1 or TV2 Ulf MANU is lit in the display press and hold the BND button for 1 second or longer MANU in the display goes off and seek tun ing is now available 2 Press the lt d or gt button to automatically seek a station Press the gt button to auto matically tune up the frequency band to the next available TV station press the lt d but ton to automatically tune down 30 DXZ845MC Manual tuning There are 2 ways available Quick tuning and step tuning When you are in the step tuning mode the fre quency changes one step at a time In the quick tuning mode you can quickly tune the desired frequency 1 Press the BND button and select the de sired band TV1 or TV2 Ulf MANU is not lit in the display press and hold the BND button for 1 second or longer MANU lights in the display and manual tun ing is now available 2 Tune into a station O Quick tuning Press and hold the lt d or gt button for 1 second or longer to tune in a station O Step tuning Press the lt d or gt button to manually tune in a station Recalling a preset station A total of 12 TV stations can be stored 6 TV1 and 6 TV2 This allows you to select your favor ite TV stations and store them in memory for later recall 1 Press the BND button and select the de sired TV band TV1 or TV2 2 To recall a stored TV station press the de sired DIRECT button to select t
28. the A M button and select BASS GAIN 2 Turning the ROTARY knob clockwise em phasizes the bass turning it counterclock wise attenuates the bass UThe factory default setting is BASS lt G 0 Adjustment range 6 to 8 3 Press the lt d or gt button to select BASS F 50 Turninng the ROTARY knob clockwise or counterclockwise to select the frequency The factory default setting is BASS F 50 Adjustment 50 80 120 Hz 4 Press the lt d or gt button to select BASS40 1 Turning the ROTARY knob clockwise or counterclockwise to select the Q curve UThe factory default setting is BASS 4Q 1 Adjustment 1 1 25 1 5 2 5 When the adjustment is complete press the A M button several times until the function mode is reached Adjusting the treble Gain Frequency This adjustment can be performed when the ADF Anti Distortion Filter is set to ADF OFF 1 Press the A M button and select TREB GAIN 2 Turning the ROTARY knob clockwise em phasizes the treble turning it counterclock wise attenuates the treble UThe factory default setting is TREB G 0 Adjustment range 6 to 6 3 Press the lt d or gt button to select TREB F 12k Turning the ROTARY knob clockwise or counterclockwise to select the frequency UThe factory default setting is TREB F 12k Adjustment 8 kHz 12 kHz DXZ845MC 13 Basic Operations
29. to open the DCP RELEASE button ACAUTION Always close the SLOPING CONSOLE be fore removing the DCP If you remove the DCP with the SLOPING CONSOLE open the sloping console closes immediately Be careful not to get your fingers caught Attaching the DCP 1 Insert the DCP so that the A section on the right side of the DCP catches on the hook on the unit 2 Press the left side O of the DCP carefully to fit itin place ACAUTION The DCP can easily be damaged by shocks After removing it be careful not to drop it or subject it to strong shocks If the RELEASE button is pressed and the DCP is not locked into place it may fall out from vibration of the car This can break the DCP so after removing it either install it on the unit or put it in its DCP case The connector connecting the unit and the DCP is an extremely important part Be careful not to damage it by pressing on it with fingernails screwdrivers etc Note If the DCP is dirty wipe off the dirt with a soft dry cloth only DXZ845MC 9 6 REMOTE CONTROL Receiver for remote control unit Operating range 30 in all directions Signal transmitter wy Remote control unit FUNC 2 ZONE I 2 ally meen BAND ISR
30. 178 W X 50 H X 155 D mm Dimensions Remote control unit 1 3 4 Width X 4 5 16 Height X 1 1 8 Depth 44 W X 110 H X 27 D mm Specifications and design are subject to change without notice for further improvement 36 DXZ845MC Clarion Co Ltd All Rights Reserved Copyright 2003 Clarion Co Ltd PE 2632B 2003 11 Printed in China Imprim en Chine Impreso en China 280 8034 00 Printed in China Imprim en Chine Impreso en China 2003 11 Installation Wire Connection Guide C larion Manuel d installation et de connexion Gu a de instalaci n conexi n de cables GI Em 1 BEFORE STARTING PR PARATIFS ANTES DE COMENZAR 1 This set is exclusively for use in cars with a negative ground 12 V power supply 2 Read these instructions carefully 12 V masse n gative 3 Be sure to disconnect the battery O terminal 2 Lire ces instructions attentivement 2 before starting This is to prevent short circuits 3 S assurer de d brancher la borne de la 3 during installation Figure 1 batterie avant de commencer Cela vitera les court circuits pendant l installation Figure 1 1 Cet appareil est exclusivement destin tre utilis dans les voitures avec une alimentation Figura 1 GD D ED 2 1 Esta unidad ha sido dise ada para utilizarse exclusivamente en autom viles con fuente de alimentaci n de 12 V y negativo masa Lea cuidadosamente
31. 2 3 Si tiene que realizar cualquier trabajo en la carrocer a como taladrado de orificios etc consulte al proveedor de su autom vil 4 Use los tornillos incluidos para la instalaci n El uso de otros tornillos puede causar da os Figura 3 Chassis Ch ssis Chasis Damage Dommage Dafio Max 8 mm 8 mm max M x 8 mm Figure 3 Figure 3 Figura 3 INSTALLING THE SOURCE UNIT INSTALLATION DE L APPAREIL PILOTE INSTALACI N DE LA UNIDAD FUENTE E Universal Mount E Montage universel 1 Place the universal mounting bracket into the instrument panel use a 1 Placer le support de montage universel dans le tableau de bord screwdriver to bend each stopper of the universal mounting bracket utiliser un tournevis pour replier vers l ext rieur chaque languette du inward t hen secure the stopper as shown in Figure 4 support de montage universel puis fixer les languettes comme 2 Wire as shown in Section 6 monie Sur la Figure Insert the source unit into the universal mounting bracket until it locks 2 C bler comme montr dans la Section 6 4 Take care of the top and bottom of the outer escutcheon and mount it gt Inserer appareil pilote dans le support de montage universel jusqu so that all the hooks are locked q que 4 Rep rer le haut et le bas de l cusson ext rieur et le monter de mani re que tous les crochets soient verrouill s c Remarques 1 Certains mod les de voiture n ces
32. AL DAMAGES THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO YOU 9 THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE 10 The laws of the State of California shall govern and control this limited warranty its interpretation and enforcement 11 Should you have any difficulties with the performance of this product during the warranty period please call or visit our web site for a listing of Authorized Warranty Service Centers in your area You may also contact the Clarion Customer Service at the address listed below for any service help you may need with Clarion products In USA In Canada Clarion Corporation of America Clarion Canada Inc Atin Customer Service Manager Warranty Service Center 661 W Redondo Beach Blvd 2239 Winston Park Drive Gardena CA 90247 4201 Oakville Ontario L6H 5R1 1 800 GO CLARION 905 829 4600 310 327 9100 www clarioncanada com www clarion com NELCOME TC 100 CHANNELS OF THE BEST ENTERTAINMENT ON THE ROAD clarion Ae siriusradio com 311119385 q M n os fe Ena 9 SM N DEV 611 00 288 1 S82 DU oipey 931119185 snus 2002 E 4 0 1 83 Ene S3U471VI2USHHOD snuis 299 lt 5 A Ti ah Bx E TEN HIEL snuis OFF osia 96 OMEN guo Jeuueu Joyyeam SL L ueq LS yoy 62 NVdS 2 vil eoiSSe Sg sup ued OS ic snnewery 72
33. CHER mode 2 Press the ERASE button for 2 seconds or longer to select ALL ERASE 3 While ALL ERASE is showing on the dis play press and hold the gt button for 2 seconds or longer The title display shows ERASING as ALL ERASE is executed Remaining capacity of the memory By pressing the REC button while in the M CATCHER mode the remaining capacity of the flash memory can be displayed for 4 sec onds as an approximate recordable time in MM minute SS second The title display shows AVIL 123 45 Note The recordable time shown varies according to the set recording mode 22 DXZ845MC Different Pieces of Music Heard by Plural Listeners 2 ZONE function About the 2 ZONE function The 2 ZONE function is a function that outputs separate sounds from the MAIN zone and SUB zone by simultaneously operating two sources in the one center unit thereby allowing plural lis teners to enjoy separate music sources This unit can control its internal sources radio CD MP3 MC etc to play back them and fur ther can simultaneously play back sources from external equipment connected via CeNET for instance CD changers etc The sources of the MAIN zone are played back from the speakers of the vehicle side and those of the SUB zone are from the headphone sys tems WH104 WH204 Notes Except AUX the MAIN and SUB zones cannot si multaneously use sources inside this unit Als
34. Clarion eAuciao Owner s manual Mode d emploi Manual de instrucciones DXZ845MC AM FM CD MP3 WMA MUSIC CATCHER PLAYER RADIO AM FM LECTEUR CD MP3 WMA MUSIC CATCHER REPRODUCTOR DE AM FM CD MP3 WMA MUSIC CATCHER COMPACT DIGITAL AUDIO TEXT SIRIUSA May Windows READ Medis Y Hy Compatible Thank you for purchasing this Clarion product Please read this owner s manual in its entirety before operating this equipment UAfter reading this manual be sure to keep it in a handy place e g glove compartment Check the contents of the enclosed warranty card and keep it carefully with this manual This manual includes the operating procedures of the CD changer and TV tuner connected via the CeNET cable The CD changer and TV tuner have their own manuals but no explanations for oper ating them are described Contents 1 2 e 9 FEATURES rere dread A ee ERE E d PRECAUTIONS ene n e an e ERO s Sloping Console Handling Compact Discs jojo NOMENCLATURE s Names of the Buttons and their Functions u 6 Major Button Operations When External Equipment is Connected to This Unit 7 Display Items iei menm ii nO LCD Screen 8 REMOTE CONTROL Inserting the Ba
35. ELEASE button and remove the DCP Press the reset button for about 2 seconds with a thin rod Reset button N NN AN Si DCP or main unit connectors are dirty Wipe the dirt off with a soft cloth moistened with cleaning alcohol CD MP3 WMA 32 No sound heard There is a disc other than a compact disc or foreign matter already in place With the sloping console open press and hold the 4 button for 3 seconds or longer The foreign matter is forcibly ejected MP3 WMA files are absent in a disc Write MP3 WMA files onto the disc properly Files are not recognized as an MP3 WMA file Use MP3 WMA files encoded properly File system is not correct Use ISO9660 level 1 2 or JOLIET or Romeo file system Sound skips or is noisy Disc is dirty Clean the disc with a soft cloth Disc is heavily scratched or warped Replace with a disc with no scratches Sound is cut or Skipped Noise is generated or noise is mixed with sound DXZ845MC MP3 WMA files are not encoded properly Use MP3 WMA files encoded properly lt O Problem Sound is bad directly after power is turned on Water droplets may form on the internal lens when the car is parked in a humid place Measure Let dry for about 1 hour with the power on Wrong filename File system is not correct Use ISO9660 level 1 2 or JOLIET or Romeo file system
36. ID or HIGH 4 Press the T button to return to the previous mode Setting the button illumination Press the COLOR button to select a color type Each time you press the COLOR button the type changes in the following order COLOR SCAN gt RED gt MANDARIN gt ORANGE gt AMBER gt YELLOW gt G YELLOW gt LIME gt GREEN gt D GREEN USER 3 COLOR SCAN O Setting COLOR SCAN mode As selecting COLOR SCAN the color auto matically changes UThe factory default setting is COLOR SCAN After second the color changes to the other 26 DXZ845MC O Setting USER mode The factory default setting is R gt 8 G gt 8 As selecting USER press and hold the COLOR button for 1 second or longer gt 8 G gt 8 appears in the display 1 Press the lt d or gt button to move the cursor 2 Turning the ROTARY knob clockwise or counterclockwise to select from 0 to 8 3 Press and hold the b gt button for 2 sec onds or longer to store the color in memory and cancel setting mode o O RED MANDARIN ORANGE AMBER YELLOW G YELLOW LIME GREEN D GREEN USER O jo O Entering titles Titles up to 10 characters long can be stored in memory and displayed for CD CD changer and Radio TV stations The number of titles that can be entered for each mode are
37. Montage fixe Avec la patte fix e l origine dans le v hicule Cappareil est concu pour une installation fixe dans le tableau de bord Si le v hicule est quip d une radio install e en usine installer le module source avec les pi ces et les vis marqu es d un ast risque Figure 11 Si le v hicule n est pas quip d une radio install e en usiine se procurer le kit d installation pour installer le module source en proc dant comme suit 1 Fixer les pattes de montage sur la carrosserie comme indiqu la Figure 11 Pour installer le module source sans patte de montage universel les orifices existent d j pour les autres mod les il faudra peut tre modifier les pattes de montage par exemple percer de nouveaux orifices 2 Effecluer les c blages comme indiqu dans installation Section 6 3 Fixer l appareil dans le tableau de bord puis remonter le tableau de bord et le panneau central Source Unit Appareil pilote Unidad fuente Pocket Vide Bolsillo Figure 11 Figure 11 Figura 11 Les pieces et la VIS portant cette marque servent pour l installation de ta radio ou sont fournies avec le kit d installation X Les vis portant cette marques sont mont es d origine dans le v hicule Remarque 1 Dans certains cas il sera parfois n cessaire de modifier le panneau central d coupe remplissage etc Remarque 2 Si le crochet de la patte d installation interf
38. NSOLE before leaving this unit unused for a prolonged period or switching OFF the ignition key If you switch OFF the ignition key with the SLOPING CONSOLE tilted the SLOPING CONSOLE does not close Handling Compact Discs 2 Before the SLOPING CONSOLE closes there may be a braking sound from the safety mechanism This is normal 3 If you move the SLOPING CONSOLE by hand this may create play To correct this play with the power on for the unit press the 4 button to close the SLOPING CONSOLE 4 After a disc is ejected the SLOPING CON SOLE automatically returns to the tilted or closed state If there is any obstruction when the SLOPING CONSOLE tries to close the safety mechanism is triggered and the SLOPING CONSOLE returns to the open state If this happens remove the obstruc tion then press the 4 button 5 To avoid scratching the compact disk keep the 12 or 8 cm CD level when inserting or re moving them Use only compact discs bearing the aise or compact DIGITAL AUDIO Do not play heart shaped octagonal or other specially shaped compact discs Some CDs recorded in CD R CD RW mode may not be usable Handling Compared to ordinary music CDs CD R and CD RW discs are both easily affected by high temperature and humidity and some of CD R and CD RW discs may not be played Therefore do not leave them for a long time in the car New discs may have some roughness around _Ball point pen the edge
39. R are the same as CD MP3 WMA Operations For operations for recoding using MUSIC CATCHER refer to the section MUSIC CATCHER Operations Pausing play 1 Press the 0 11 button to pause play PAUSE appears in the display 2 To resume CD play press the PHI button again DXZ845MC 17 CD MP3 WMA Operations Displaying CD titles This unit can display title data for CD text MP3 WMA disc and user titles input with this unit 1 Press the D button to display the title 2 Each time you press and hold the D button for 1 second or longer the title display changes in the following order CD TEXT disc User title disc CD text title disc gt Artist name gt CD text title track User title disc O MP3 WMA disc Folder gt File Album TAG gt Artist TAG Title TAG Folder M CATCHER Folder File Notes If the CD playing is not a CD text CD or no user title has been input NO TITLE appears in the display If MP3 WMA disc is not input TAG NO TAG ap pears in the display e For supports ID3 Tags V2 3 2 2 1 1 1 0 Tag displays give priority to V2 3 2 2 In the case of album Tags for WMA the informa tion written into the extension header is displayed Only ASCII characters can be displayed in Tags Selecting a track O Track up 1 Press the button to move ahead to the beginning of the next track 2 Each time you press the button t
40. acket 1 pair for the left and right sides Support de montage 1 paire pour les taces gauche et droite Soporte de montaje 1 par para los lados izquierdo y derecho Center Panel Note 1 Panneau central Remarqure 1 Panel central Nota 1 The parts and SCREW with this mark are used to install radio or included in the installation kit The screws with this mark are originally attached to the vehicle Note 1 In some cases the center panel may require some modification trimming filling etc Note 2 If a hook on the installation bracket interferes with the unit bend and flatten it with a nipper or a similar tool ED ED 4 PP AAA AA A A A AS SASA SERASA SI A ARA B PRECAUCION Retire el tap n despu s de los siguientes procedimientos indicados abajo cuando esta unidad de la fuente est instalada sin el soporte de montaje universal 1 Quite el tornillo de la unidad de la fuente Figura 5 2 Quite el tap n de la unidad de la fuente Figura 6 3 Instale el tornillo retirado de la unidad de la fuente Figura 7 Apriete firmemente el tornillo Nota Guarde el tap n retirado en un lugar seguro junto con el Manual de instrucciones Example 2 Exemple 2 Ejemplo 2 ER EAM SEAS WPRECAUTION BPRECAUCION PRECAUTION il iit E PEA E iad Figure 7 Figure 7 Figura 7 Figure 8 Figure 8 Figura 8 be
41. appears for about 2 seconds in the title display and then repeat play starts 2 To cancel repeat play press the RPT button again The play status display such as RPT disap pears from the display and normal play re sumes from the track currently being played Folder repeat play This function allows you to play a track currently being played in the MP3 WMA folder repeatedly 1 Press and hold the RPT button for 1 second or longer to perform folder repeat play The indications FOLDER and RPT light up in the display and Bg REPEAT appears for about 2 seconds in the title display and then folder repeat play starts 2 To cancel folder repeat play press the RPT button again The play status indications such FOLDER and RPT disappear from the display and nor mal play resumes from the track currently be ing played Random play This function allows you to play all tracks re corded on a disc in a random order 1 Press the RDM button to perform random play The indication RDM lights up in the display and TRK RANDOM or RANDOM when performing random play for tracks on a MP3 WMA disc appears in the title display for about 2 seconds and then random play starts The tracks on the disc are then played in a random order 2 To cancel random play press the RDM but ton again The play status indication such as RDM dis appears from the display and normal play re sume
42. ause No function MUTE Turns mute on and off ISR Recalls ISR radio station in memory Press and hold for 2 seconds or longer Stores current station into ISR memory radio mode only Press and hold the button for 1 second or longer to switch the main and sub zone sound source only while 2 ZONE mode on DISP Switches among main display clock display SCN Preset scan When pressed and held for 2 seconds or longer Auto store Scan play Press and hold the button for 1 second or longer to perform folder scan play while in the MP3 WMA disc MC mode Scan play When pressed and held for 1 second or longer Disc scan play Preset scan When pressed and held for 2 seconds or longer Auto store No function Repeat play Press and hold the button for 1 second or longer to perform folder Repeat play while in the MP3 WMA disc MC mode Repeat play When pressed and held for 1 second or longer Disc repeat play No function 2 ZONE No function Random play Press and hold the button for 1 second or longer to perform folder Random play while in the MP3 WMA disc MC mode Random play When pressed and held for 1 second or longer Disc random play Switches between TV and VTR Press and hold for 1 second or longer to turn on or off the 2 ZONE mode Press to switch the control zone between main zone or sub zone while 2 ZONE
43. ay contrast to match the angle of installation of the unit The factory default setting is 8 Adjustment level 1 to 16 1 Press and hold the T button for 1 second or longer to switch to the adjustment selection display 2 Press the lt d or P gt button to select CONTRAST 3 Turning the ROTARY knob clockwise or counterclockwise to adjust the contrast 4 Press the T button to return to the previous mode Anti theft indicator The red Anti theft indicator is a function for pre venting theft When the DCP is removed from the unit this indicator blinks UThe factory default setting is OFF 1 Press and hold the T button for 1 second or longer to switch to the adjustment selection display 2 Press the lt d or gt button and select BLINK 3 Turning the ROTARY knob clockwise to set this function ON or turn it counterclockwise to switch this function OFF 4 Press the T button to return to the previous mode Setting the Subwoofer The factory default setting is SUB W ON 1 Press and hold the T button for 1 second or longer to switch to the adjustment selection display 2 Press the lt d or P gt button and select SUB WOOFER 3 Turning the ROTARY knob clockwise or counterclockwise and select or OFF 4 Press the T button to return to the previous mode Setting LOW PASS FILTER The factory default setting is THRGH
44. ay shows AMP GUARD 1 Turn down sound volume Function can also be restored by turning the power off and on again Speaker volume is reduced automatically when the speaker protection circuit oper ates If the sound is muted again consult our service department CD changer 34 ERROR 2 A DISC inside the CD changer is not loaded This is a failure of CD changer s mechanism and consult your store of purchase ERROR 3 A DISC inside the CD changer cannot be played due to scratches etc Replace with a non scratched non warped disc ERROR 6 DXZ845MC A DISC inside the CD changer cannot be played because it is loaded upside down Eject the disc then reload it properly Error Display ERROR 2 A DISC inside the DVD changer cannot be played Measure This is a failure of DVD mechanism and con Sult your store of purchase ERROR 3 A DISC cannot be played due to scratches etc Retry or replace with a non scratched non warped disc ERROR 6 A DISC inside the DVD changer cannot be played because it is loaded upside down Eject the disc then reload it properly o o z g lt a gt a ERROR P Parental level error Set the correct Parental level ERROR R Region code error Eject the disc and replace correct region code disc If an error display other than the ones described above appears press the reset button If t
45. bsection Entering titles in section Operations Com mon to Each Mode Setting MAGNA BASS EXTEND The MAGNA BASS EXTEND does not adjust the low sound area like the normal sound ad justment function but emphasizes the deep bass sound area to provide you with a dynamic sound The factory default setting is off 1 Press and hold the A M button for 1 second or longer to turn on the MAGNA BASS EX TEND effect M B EX lights in the display 2 Press and hold the A M button for 1 second or longer to turn off the MAGNA BASS EXTEND effect M B EX goes off from the display Note e When ADF 1 ADF 2 or ADF 3 is selected for ADF Anti Distortion Filter setting of MAGNA BASS EX cannot be performed Basic Operations Setting the Anti Distortion Filter The adopted Liveliness Enhancement Filter and Sound Tone Compensation functions al low well modulated realistic playback without af fecting the characteristics of the original sound tone This unit are provided with 3 types of sound tone effects stored in memory Select the one you prefer The factory default setting is OFF Each time you press the ADF button the tone effect changes in the following order ADF 1 ADF 2 ADF 3 ADF ADF 1 suitable for the genuine speakers ADF 2 suitable for separate speakers ADF 3 suitable for coaxial speakers ADF OFF no sound effect No
46. c Heat may damage the wires 3 If the fuse should blow check that the wiring is correct If it is replace the fuse with a new one with the same amperage rating as the original one Figure 14 Note There are various types of fuse holder Do not let the battery side touch other metal parts 4 Connect the CeNET extension cable fully and securely until it locks When the CeNET extension cable is pulled hold the slide cap part and pull it towards you When the CeNET extension cable is extended or branches use extension cable CCA 520 2 5m or CCA 521 0 6m or Y adapter CCA 519 each of them is sold separately Use the CeNET extension cable made by Clarion 5 When the main power supply fuse in the car is 15 A or less purchase an automotive cable that can withstand 15 A and supply this unit with power directly from the battery to ensure that the unit will operate normally Note that a fuse must be installed at a distance no longer than 30 cm from the cable battery terminal to prevent accidents 1 S assurer de mettre l appareil hors circuit avant de faire le c blage 2 Faire particuli rement attention lors de l acheminement des fils Les loigner du moteur des tuyaux d chappement etc La chaleur risque d endommager ces fils 3 S le fusible saute v rifier s le c blage est correct Si le fusible est grill le remplacer par un fusible neuf de m me amp rage que le fusible d origine Figure 14 Remarque
47. e II button to pause play PAUSE appears in the display 2 To resume play press the p II button again Displaying CD titles This unit can display title data for CD text CDs and user titles input with this unit Title data for CD text CDs can be displayed with this unit only when it is connected to CDC655Tz When connected to DCZ625 or CDC1255z Press the D button to display the title When connected to CDC655Tz 1 Press the D button to display the title 2 Each time you press and hold the D button for 1 second or longer the title display changes in the following order User title disc CD text title disc gt Artist name gt CD text title track gt User title disc 28 DXZ845MC Notes If the CD playing is not a CD text CD or no user title has been input NO TITLE appears in the display If a CD text CD is not input its disc title or a track title NO TITLE appears in the display Procedure to scroll a title Set SCROLL to ON or OFF The factory default setting is Refer to the subsection Turning the screen saver function on or off in section Operation common to each mode O When set to ON The title is automatically kept scrolling O When set to OFF To scroll just 1 time when the title was changed or the T button was pressed Selecting a CD Press the UP or DN button to select the de sired disc Ulf a CD is not l
48. ead or laser pick up cleaning or adjustments or labor costs for the removal or reinstallation of the unit for repair 5 The sole responsibility of Clarion under this limited warranty shall be limited to the repair of the product or replacement of the product at the sole discretion of Clarion 6 Product must be shipped in its original carton or equivalent carton fully insured with shipping charges prepaid Clarion will not assume any responsibility for any loss or damage incurred in shipping 7 CLARION PRODUCTS INCLUDING PROAUDIO PRODUCTS PURCHASED FROM A SOURCE OTHER THAN AN AUTHORIZED CLARION DEALER INCLUDING ANY AND ALL PURCHASES VIA THE INTERNET FROM A NON INTERNET AUTHORIZED CLARION DEALER SHALL NOT BE COVERED BY ANY CLARION LIMITED WARRANTY TO THE EXTENT ALLOWED BY APPLICABLE LAW IN THE EVENT AND TO THE EXTENT APPLICABLE LAW PROHIBITS ELIMINATION OF WARRANTIES UNDER THESE CIRCUMSTANCES THE APPLICABLE LIMITED WARRANTY PERIOD SHALL BE DEEMED TO BE FIFTEEN 15 DAYS FROM THE DATE OF ORIGINAL PURCHASE 8 ALL IMPLIED WARRANTIES EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW SHALL HAVE NO GREATER DURATION THAN THE WARRANTY PERIOD SET FORTH ABOVE UNDER NO CIRCUMSTANCES SHALL CLARION BE LIABLE FOR ANY LOSS OR DAMAGE DIRECT OR CONSEQUENTIAL ARISING OUT OF THE USE OR INABILITY TO USE THE PRODUCT BECAUSE SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS OR EXCLUSIONS OR LIMITATIONS OF INCIDENTAL OR CONSEQUENTI
49. er of the insertion slot Backup Eject function Just pressing the 4 button ejects the disc even if the power to the unit was not turned on 1 Press the 4 button Remove the disc after it is ejected Note e Always close the sloping console after opening it or ejecting the CD ACAUTION Be careful not to catch your hand or fin gers while closing the SLOPING CON SOLE Do not try to put your hand or fingers in the disc insertion slot Also never insert foreign objects into the slot Do not insert discs where adhesive comes out from cellophane tape or a rental CD la bel or discs with marks where cellophane tape or rental CD labels were removed It may be impossible to extract these discs from the unit and they may cause the unit to break down Listening to a disc already loaded in the unit Press the FNC button to select the CD MP3 mode When the unit enters the CD MP3 mode play starts automatically If there is no disc loaded the indication NO DISC appears in the title display TUNER SIRIUS gt CD MP3 M CATCHER CD changer AUX 4 TV DVD changer The mode changes each time the FNC button is pressed Modes are not displayed for equipment that is not connected MUSIC CATCHER In the M CATCHER mode the files recorded in the built in flash memory are played back Op erations for listening to a recording made using MUSIC CATCHE
50. ge display ON or OFF The factory default setting is ON 1 Press and hold the T button for 1 second or longer to switch to the adjustment selection display 2 Press the lt d or gt button to select MESSAGE 3 Turning the ROTARY knob clockwise or counterclockwise to set the message display ON or OFF 4 Press the T button to return to the previous mode Operations Common to Each Mode Setting the method for title scroll Set how to scroll in CD TEXT MP3 WMA TITLE The factory default setting is ON 1 Press and hold the T button for 1 second or longer to switch to the adjustment selection display 2 Press the lt d or P gt button to select AUTO SCROLL 3 Turning the ROTARY knob clockwise or counterclockwise and select ON or OFF ON To scroll automatically e OFF To scroll just 1 time when the title was changed or the title key was pressed 4 Press the T button to return to the previous mode Dimmer control You can setting the dimmer control ON or OFF The factory default setting is ON 1 Press and hold the T button for 1 second or longer to switch to the adjustment selection display 2 Press the lt d or gt button to select DIMMER 3 Turning the ROTARY knob clockwise or counterclockwise and select ON or OFF 4 Press the T button to return to the previous mode Adjusting the display contrast You can adjust the displ
51. hat station Press and hold one of the DIRECT buttons for 2 seconds or longer to store the current station into preset memory Manual memory 1 Select the desired station with seek tuning manual tuning or preset tuning 2 Press and hold one of DIRECT buttons for 2 seconds or longer to store the current sta tion into preset memory TV Operations Auto store Auto store selects 6 TV stations automatically and stores each one into preset memory If there are not 6 stations with good reception stations previously stored in memory remain and only the strong stations are stored into memory 1 Press the BND button and select the de sired TV band TV1 or TV2 2 Press and hold the P A button for 2 sec onds or longer The stations with good recep tion are stored automatically to the preset channels Preset scan Preset scan allows the user to view each preset position before it automatically advances to the next preset This function is useful for searching for a desired TV station in memory 1 Press the P A button 2 When the desired station is found press the P A button again to remain tuned to that station Note Do not press and hold the P A button for 2 sec onds or longer Doing so will trigger the auto store function and start storing stations into memory Setting the TV diver You can change the reception setting for the TV antenna connected to the TV tuner 1 Press and hold t
52. he T button for 1 second or longer to switch to the adjustment selection display 2 Press the lt d or gt button to select TV DIVER 3 Turning the ROTARY knob clockwise to set to ON or counterclockwise to set to OFF ON Sets the diver setting to ON e OFF Sets the diver setting to OFF 4 Press the T button to return to the previous mode DXZ845MC 31 9 IN CASE OF DIFFICULTY Problem Power does not turn on No sound is produced Fuse is blown Measure Replace with a fuse of the same amperage If the fuse blows again consult your store of purchase Incorrect wiring Consult your store of purchase No sound output when operating the unit with amplifiers or power antenna attached Power antenna lead is shorted to ground or excessive current is required for remote on the amplifiers or power antenna 1 Turn the unit off 2 Remove all wires attached to the power antenna lead Check each wire for a possible short to ground using an ohm meter Turn the unit back on Reconnect each amplifier remote wire to the power antenna lead one by one If the amplifiers turn off before all wires are attached use an external relay to provide remote on voltage excessive current required Nothing happens when buttons are pressed Display is not accurate The microprocessor has malfunctioned due to noise etc Turn off the power then press the R
53. he track advances ahead to the beginning of the next track O Track down 1 Press the lt d button to move back to the beginning of the current track 2 Press the lt d button twice to move to the beginning of the previous track Fast forward fast backward O Fast forward Press and hold the button for 1 second or longer O Fast backward Press and hold the lt d button for 1 second or longer For MP3 WMA discs it takes some time until the start of searching and between tracks In addition the playing time may have a margin of error 18 DXZ845MC Folder Select This function allows you to select a folder con taining MP3 WMA files and start playing from the first track in the folder 1 Press the UP or DN button Press the DN button to move to the previ ous folder Press the UP button to move to the next folder Root folder Press the UP button while in the final folder to shift to the first folder Folder without an MP3 WMA file is not select able 2 To select a track press the lt d or gt but ton Top function The top function resets the CD player to the first track of the disc Press the BND button to play the first track track No 1 on the disc ln case of MP3 WMA the first track of a folder be ing played will be returned CD MP3 WMA Operations Scan play This function allows you to locate and play the first 10 seconds of all the tracks rec
54. he problem persists turn off the power and consult your store of purchase DXZ845MC 35 11 SPECIFICATIONS FM Tuner Frequency Range 87 9 MHz to 107 9 MHz Usable Sensitivity 9 dBf 50dB Quieting Sensitivity 15 dBf Alternate Channel Selectivity 70 dB Stereo Separation 1 KHz 35 dB Frequency Response 3 dB 30 Hz to 15 kHz AM Tuner Frequency Range 530 kHz to 1710 kHz Usable Sensitivity 25 uV CD Player System Compact disc digital audio system Usable Discs Compact disc Frequency Response 1 dB 5 Hz to 20 kHz Signal to Noise Ratio 1 kHz 100 dB Dynamic Range 1 kHz 95 dB Harmonic Distortion 0 0196 Channel Separation 1 kHz 85 dB MC mode HQ Approximately 265 minutes 66 tracks 4 minutes for each LP Approximately 353 minutes 88 tracks 4 minutes for each Notes Audio Maximum Power Output 212 W 53 W X 4ch Continuous Average Power Output 18 W X 4 into 4 N 20 Hz to 20 kHz 1 THD Bass Control Action 50 Hz 80 Hz 120 Hz 16 dB 12dB Treble Control Action 8 kHz 12 kHz 12 dB Line Output Level CD 1 kHz 1 8V General Power Supply Voltage 14 4 V DC 10 8 to 15 6 V allowable negative ground Current Consumption Less than 15 A 3A Speaker Impedance 4 N 4 N to 8 N allowable Weight Source unit 3 52 Ib 1 6 kg Weight Remote control unit 2 82 oz 80 g including battery Dimensions Source unit 7 Width X 2 Height X 6 1 8 Depth
55. ist name a play list Write desired tracks to a CD R RW etc Be sure to use alphanumeric ASCII characters for all file names 2 Make a play list by using a multimedia player etc and save the data The file format must be M3U 3 Again write this play list to the CD R RW etc Notes When writing to a CD R RW etc be sure to use alphanumeric ASCIl characters Up to 5 layers can be recognized as a list For written play lists latest 5 lists are recognized in the order in which they are written When writing to a CD R RW etc turn off the Disc At Once function When adding a play list it is recommended to write it in the Root folder 20 DXZ845MC MUSIC CATCHER Operations Setting a recording mode The recording mode for MUSIC CATCHER can be switched between the following 2 modes HQ High Quality MODE about 265 minutes LP Long Play MODE about 353 minutes The factory default setting is HQ 1 Press and hold the T button for 1 second or longer to switch to the adjustment selection display 2 Press the lt d or P gt button and select MC REC 3 Turning the ROTARY knob clockwise or counterclockwise and select or LP 4 Press the T button to return to the previous mode Notes on recoding using MUSIC CATCHER Recording operations are to be performed in the CD MP3 mode Recordable media are CD DAs only Discs CD R CD RW created b
56. iting soft ware format Normal play may not be possible if the disc is recorded on another format 2 The folder name and file name can be dis played as the title during MP3 WMA play but the title must be within 128 single byte alpha betical letters and numerals including an ex tension 3 Do not affix a name to a file inside a folder having the same name O Folder structure 1 A disc with a folder having more than 8 hier archical levels will be impossible Number of files or folders 1 Up to 255 files can be recognized per folder Up to 500 files can be played 2 Tracks are played in the order that they were recorded onto a disc Tracks might not always be played in the order displayed on the PC 3 Some noise may occur depending on the type of encoder software used while recording Multisession function When disc contains both normal CD type tracks and MP3 WMA type tracks mixedly you can se lect which type of the recorded tracks to play O Default value is CD Each time you press and hold the BND button for 1 second or longer the mixed mode is switched between CD type or MP3 WMA type The following indication appears in the title dis play when switching the track type to be played O Display when CD type track is selected t Display when MP3 WMA type track is se lected hiss musun Es 1 Types of recording that can be played are as follows CD MP3 WMA Operati
57. just the volume by turning the knob clockwise or counterclockwise Use the knob to perform various settings 4 button Press to eject a CD loaded in the unit Press to open the CD slot and insert a CD ADF button Use the button to select one of the 3 types of sound characteristics already stored in memory ISR button Recall ISR radio station in memory Press and hold for 2 seconds or longer Store current station into ISR memory radio mode only Press and hold the button for 1 second or longer to switch the main and sub zone sound source only while 2 ZONE mode on COLOR button Button s color change to multicolor 2 button Press and hold for 1 second or longer to turn on or off the 2 ZONE mode Press to switch the control zone between main zone or sub zone while 2 ZONE mode on D button Switch the display indication Main display Clock dis play T button Use the button to input a title in the Radio CD mode Press and hold the button for 1 second or longer to enter the adjust mode P A button Perform preset scan while in the radio mode When the button is pressed and held auto store is performed UP DN buttons Select the Folder MP3 WMA disc MC mode only DIRECT buttons Store a station into memory or recall it directly while in the radio mode PLAY LIST ERASE button Press and hold for 1 second or longer to turn on or off the play list mode
58. lanc fil de mise sous tension t l commandabie de Pamplificateur Conductor azul blanco Conductor de conexi n de la alimentaci n del amplificador 5 Description y Note Pornocu 1 18 proches Some units do not have connecting leads or jacks Cable prolongador de 16 contactos Refer to x _ Ik fijado a la unidad fuente Remarque amp Gray Gb Gris Gris Certains appareils n ont pas de conducteurs de connexion ou de prises D Nota vant dro Delantero derecho Brown wire none mute lead x Nota OGraylBlack OGrisinoir Gris negro Fil marron fil de sourdine de t l phone Algunas unidades no tienen cables de conexi n ni conectores Conductor marr n Conductor de silenciamiento de tel fono Refi rase a x 1 White amp Blanc Blanco EE Front Left a Avant gauche loro ccm Connect to cellular phone mute lead Delantero izquierdo Brancher au fil de sourdine du t l phone mobile OWhite Black Blanc noir OBlanco negro Con ctelo al conductor de silenciamiento del tel fono modular Yellow wire Memory back up lead Purple amp Pourpre P rpura Fil jaune til de soutien m moire w Rear Right Conductor amarillo Conductor de protecci n de la memoria Arri re droit Connect directly to battery Trasero derecho 5 Lo Brancher directement la batterie Purple Black GPourpre noir OP rpura negro Fuse 15A Con ctelo directamente a la bater a GI 1 FOU EX No Desc
59. mode on Some of the corresponding buttons on the main unit and remote control unit have different functions 11 DXZ845MC 7 OPERATIONS Basic Operations ACAUTION Be sure to lower the volume before switch ing off the unit power or the ignition key The unit remembers its last volume setting If you switch the power off with the volume up when you switch the power back on the sud den loud volume may hurt your hearing and damage the unit Turning on off the power Note Po Be careful about using this unit for a long time without running the engine If you drain the car s battery too far you may not be able to start the engine and this can reduce the service life of the battery Press the FNC button The illumination and display on the unit light up The unit automatically remembers its last operation mode and will automatically switch to display that mode Press and hold the FNC button for 1 second or longer to turn off the power for the unit Note System check The first time this unit is turned on after the wire connections are completed it must be checked what equipment is connected When the power is turned on SYSTEM CHCK and Push POWER appear in the display alternately so press the FNC button The system check starts within the unit When the system check is complete press the FNC button again Selecting a mode 1 m Press the FNC butto
60. mong the SIRIUS mode etc What is Sirius Satellite Radio SIRIUS Sirius is radio the way it was meant to be Up to 100 new channels of digital quality programming delivered to listeners coast to coast via satellite That means 50 channels of completely commercial free music Plus up to 50 more channels of news sports and entertainment from names like CNBC Discovery SCI FI Channel A amp E House of Blues E NPR Speedvision and ESPN DXZ845MC 7 Major button operations when external equipment is connected to this unit Sirius is live dynamic entertainment completely focused on listeners Every minute of every day of every week will be different All 50 commercial free music channels are created in house and hosted by DJs who know and From its state of the art digital broadcasting facility in Rockefeller Center New York City Sirius will deliver the broadest deepest mix of radio entertainment from coast to coast love the music Do you like Reggae How about Classic Sirius will bring you music and entertainment program Rock or New Rock Sirius has an array of choices span ming that is simply not available on traditional radio in ning a vast range of musical tastes including the hits of any market across the country It s radio like you ve the 50 s 60 s 70 s amp 80 s as well as Jazz Country never heard before Blues Pop Rap R amp B Bluegrass Alternative Classical S Y m I Get Sirius and Li
61. n to change the opera tion mode Each time you press the FNC button the operation mode changes in the following or der Radio mode gt SIRIUS mode gt CD MP3 mode M CATCHER mode gt CD changer mode gt DVD changer mode gt TV mode gt AUX mode gt Radio mode External equipment not connected with CeNET is not displayed 12 DXZ845MC Note Be sure to read this chapter referring to the front diagrams of chapter 3 CONTROLS on page 5 unfold Adjusting the volume 1 Press the front part of the ROTARY knob The knob will pop up 2 Turning the ROTARY knob clockwise in creases the volume turning it counterclock wise decreases the volume The volume level is from 0 minimum to 33 maximum the display Press the D button to select the desired dis play 2 Each time you press the D button the dis play switches in the following order Main display gt Clock display Main display Once selected the preferred display becomes the display default When a function adjust ment such as volume is made the screen will momentarily switch to that function s display then revert back to the preferred display sev eral seconds after the adjustment When you have entered a title in a CD MP3 WMA it appears in the main display If you have not entered a title NO TITLE appears in the title display instead For information on how to enter a title refer to the su
62. nte est instalada sin el soporte de montaje universal existendo agujeros puede requerirse una modificaci n para otros modelos tal como perforaci n de nuevos agujeros 2 Realice el cableado tal como se muestra en instalaci n Secci n 6 3 Asegure la unidad en el tablero de instrumentos y luego vuelva armar el tablero de instrumentos y el panel central 4 Hexagonal screw M5 x 8 4 Vis hexagonale 4 Tornillo hexagonale M5 x 8 Note 2 Remarque 2 Nota 2 Box 5x8 Las piezas y los tornillos con esta marca se utilizan para instalar una radio o est n incluidos en el juego de instalaci n Los tornillos con esta marca est n originalmente sujetos al veh culo Nota 1 En algunos casos el panel central puede requerr cierta modificaci n Recorte relleno etc Nota 2 Si un gancho en et soporte de instalaci n interfiere con la unidad d belo y apl stelo con una pinzas de corte u otra herramienta especial REMOVAL OF THE SOURCE UNIT DEPOSE DE L APPAREIL PILOTE DESMONTAJE DE LA UNIDAD FUENTE 1 When removing the source unit disassemble it in the reverse of the order in Section 3 INSTALLING THE SOURCE UNIT 2 Remove the Detachable Control Panel DCP For instructions on removing the DCP refer to the owner s manual 3 Press the outer escutcheon upward and remove it Figure 12 Insert and lock the hook plates Figure 13 5 Pull the hook plates to remove the source unit
63. o external equipment connected via CeNET cannot simultaneously be used The TV mode while the 2 ZONE function is tuned on is forced to change to VTR playback The ISR function cannot be operated when the 2 ZONE function is turned on The Audio mode and ADF Anti Distortion Filter function cannot be set for the sources of the SUB zone Setting the 2 ZONE function The initial setting is OFF When you have set the 2 ZONE function to in the initial state the MAIN zone services for sources inside this unit and the SUB zone for AUX Changing a source during later use causes the latest heard source to be invoked Press and hold the 2 button for 1 second or longer to turn on or off When the 2 ZONE func tion is turned on 2 ZONE on the display lights Different Pieces of Music Heard by Plural Listeners 2 ZONE function Switching sources 1 Press the 2 button to select the control zone MAIN or SUB Every time the button is pressed the MAIN ZONE changes to the SUB ZONE or vice versa MAIN or SUB on the display lights at that time thereby indicating that the relevant zone becomes ready to operate 2 Press the FNC button to select a source in the control zone Every time the button is pressed the follow ings appear in turn For a source group included in this unit Radio gt CD MP3 gt M CATCHER gt AUX gt Radio 6 For a source group in e
64. o is output The WMA indicator blinks Windows Media and the Windows logo are trademarks or registered trademarks of Microsoft Corporation in the United States and or other countries To disable DRM Digital Rights Manage ment 1 When using Windows Media Player 8 click on TOOLS gt OPTIONS 3 COPY MUSIC tab then under COPY SETTINGS unclick the check box for PROTECT CONTENT Then reconstruct files 2 When using Windows Media Player 9 click on TOOL OPTIONS 3 MUSIC RECORD tab then under Recording settings unclick the Check box for RECORD PROTECTED MUSIC Then reconstruct files Personally constructed WMA files are used at your own responsibility Precautions when creating MP3 WMA disc O Usable sampling rates and bit rates 1 MP3 Sampling rate 11 025 kHz 48 kHz Bit rate 8 kbps 320 kbps VBR 2 WMA Bit rate 48 kbps 192 kbps O File extensions 1 Always add a file extension MP3 or WMA to MP3 or WMA file by using single byte let ters If you add a file extension other than specified or forget to add the file extension the file cannot be played 16 DXZ845MC 2 Files without MP3 WMA data will not play The indication appears in the play time display if you attempt to play files with out MP3 WMA data O Logical format File system 1 When writing MP3 WMA file on a CD R disc or CD RW disc please select ISO9660 level 1 2 JOLIET or Romeo as the wr
65. oaded in a slot of magazine pressing the UP or DN button can not work Selecting a track O Track up 1 Press the gt button to move ahead to the beginning of the next track 2 Each time you press the B gt button the track advances ahead to the beginning of the next track O Track down 1 Press the lt d button to move back to the beginning of the current track 2 Press the lt d button twice to move to the beginning of the previous track CD Changer Operations Fast forward fast backward O Fast forward Press and hold the button for 1 second or longer O Fast backward Press and hold the lt d button for 1 second or longer Scan play Scan play locates and plays the first 10 seconds of each track on a disc automatically This func tion continues on the disc until it is cancelled The scan play is useful when you want to select a desired track 1 Press the SCN button to start track scan ning SCN lights in the display 2 To cancel the scan play press the SCN but ton again SCN goes off from the display and the current track continues to play Disc scan play Disc scan play locates and plays the first 10 seconds of the first track on each disc in the cur rently selected CD changer This function contin ues automatically until it is cancelled Disc scan play is useful when you want to select a desired CD 1 Press and hold the SCN button for 1 sec ond o
66. ompact disc cleaner let the com pact disc dry off well before playing it Be sure to unfold and read the next page Veuillez d plier et vous r f rer la page suivante Cerci rese de desplegar y de leer la p gina siguiente 3 CONTROLS LES COMMANDES CONTROLES Source unit Appareil pilote Unidad fuente 3 ROTARY RELEASE O D 77 JET d IFNC ED ADF A M ISR BND EE gt r p COLOR REC lt 4 gt gt PLAY LIST ERASE With the SLOPING CONSOLE opened Ouvrez la CONSOLE RABATTABLE Apertura de la CONSOLA INCLINABLE CD SLOT Note Be sure to unfold this page and refer to the front diagrams as you read each chapter Remarque Veuillez d plier cette page et vous r f rer aux sch mas quand vous lisez chaque chapitre Nota Cuando lea los cap tulos despliegue esta p gina y consulte los diagramas NOMENCLATURE Note Be sure to read this chapter referring to the front diagrams of chapter 3 CONTROLS on page 5 unfold MC is the abbreviation of MUSIC CATCHER ADF is the abbreviation of Anti Distortion Filter Names of the Buttons and their Functions RELEASE button Deeply push in the button to unlock the DCP ROTARY knob Ad
67. ons Diss Setting set to CD Setto MP3WMA Play CD Mixed with CD and MP3 WMA type tracks Play MP3 WMA CD type track only Play CD Play CD MP3 WMA type track only Play MP3 WMA Play MP3 WMA 2 After making these settings remove the disc and then reinsert it 3 When a mixed mode CD is loaded and CD is Set the track to be played first is MP3 WMA file data and no sound is heard Note When playing a CCCD Copy Control CD set the setting to CD type When this is set to MP3 WWA type the CD cannot be played normally in some cases Disc In Play function As long as the ignition key is turned to the ON or ACC position this function allows you to turn the power to the unit and start playing the disc auto matically when the disc is inserted even if the power is not turned on Loading a CD 1 Press the 4 button The SLOPING CONSOLE opens 2 Insert a CD into the center of the CD SLOT with the label side facing up The CD plays automatically after loading Notes Never insert foreign objects into the CD SLOT If the CD is not inserted easily there may be another CD in the mechanism or the unit may require service compact Discs not bearing the or mark and CD ROMs cannot be played by this unit Some CDs recorded in CD R CD RW mode may not be usable Loading 8 cm compact discs UNo adapter is required to play an 8 cm CD Ulnsert the 8 cm CD into the cent
68. orded on a disc 1 Press the SCN button to perform scan play The indication SCN lights up in the display and TRK SCAN or SCAN when searching for a track in the MP3 WMA file appears in the title display for about 2 sec onds then scan play starts Scan play starts from the next track after the track currently being played 2 To cancel scan play press the SCN button again The play status indication such as SCN dis appears from the display and the current track is played Folder scan play This function allows you to locate and play the first 10 seconds of the first track of all the folders on an MP3 WMA disc 1 Press and hold the SCN button for 1 sec ond or longer to perform folder scan play The indications FOLDER and SCN light up in the display and g SCAN appears for about 2 seconds in the title display and then folder scan play starts Folder scan play starts from the next track af ter the track currently being played 2 To cancel folder scan play press the SCN button again The play status indications such as FOLDER and SCN disappear from the display and the current track is played Repeat play This function allows you to play the current track repeatedly 1 Press the RPT button to perform repeat play The indication RPT lights up in the display and TRK REPEAT or REPEAT when performing repeated play for a track in the MP3 WMA file
69. otal of 24 preset positions 6 FM1 6 FM2 6 6 AM exists to store individual radio sta tions in memory Pressing the corresponding DIRECT button recalls the stored radio fre quency automatically 1 Press the BND button and select the de sired band FM or AM 2 Press the corresponding DIRECT button to recall the stored station Press and hold one of the DIRECT buttons for 2 seconds or longer to store that station into preset memory Manual memory 1 Select the desired station with seek tuning manual tuning or preset tuning 2 Press and hold one of the DIRECT buttons for 2 seconds or longer to store the current station into preset memory Auto store Auto store is a function for storing up to 6 sta tions that are automatically tuned in sequentially If 6 receivable stations cannot be received a previously stored station remains unoverwritten at the memory position 1 Press the BND button and select the de sired band FM or AM 2 Press and hold the P A button for 2 sec onds or longer The stations with good recep tion are stored automatically to the preset channels Preset scan Preset scan receives the stations stored in pre set memory in order This function is useful when searching for a desired station in memory 1 Press the P A button 2 When a desired station is tuned in press the P A button again to continue receiving that station Note Be careful not to pres
70. que se afloje la unidad fuente Instrument panel Tableau de bord Tablero de instrumentos GM _ d Hexagonal bolt Ecrou hexagonal Perno hexagonal Strap Armature Banda This part is not provided in some models Cette piece n existe pas sur tous les mod les Esta pieza no se suministra con algunos modelos Universal mounting bracket Support de montage universel Soporte de montaje universal Tournevis Destornillador Source Unit Appareil pilote Unidad fuente Installation direction Sens d installation Direcci n de instalaci n Spring Ressort Resorte Stoppers Languettes Retenes Note Before attaching the universal mounting bracket slightly bend the spring toward the inside with your fingers and attach it to the side of car Remarque Avant de fixer le patin de montage universel pliez l gerement le ressort vers l int rieur avec les doigts et fixez le sur le c t de la V Bottom Bas Parte inferior 8 Outer escutcheon Ecusson ext rieur Pieza ornamental exterior Outer escutcheon side view Vue lat rale de l cusson ext rieur Vista lateral de la pieza ornamental exterior Figure 4 Figure 4 Figura 4 voiture Nota y Antes de fijar el soporte de montaje universal doble ligeramente el resorte hacia el interior con los dedos y f jelo en la parte lateral del autom vil E PRECAUTION Remove the stopper following the procedures belo
71. r longer DISC and SCN light in the display and disc scan play starts 2 To cancel disc scan play press the SCN button again DISC and SCN go off from the display and the current track continues to play Repeat play Repeat play continuously plays the current track This function continues automatically until it is cancelled 1 Press the button lights in the display and the current track is repeated 2 To cancel repeat play press the RPT button again RPT goes off from the display and normal play resumes Disc repeat play After all the tracks on the current disc have been played disc repeat play automatically replays the current disc over from the first track This function continues automatically until it is can celled 1 Press and hold the RPT button for 1 second or longer DISC and RPT light in the dis play and disc repeat play starts 2 To cancel disc repeat play press the RPT button again DISC and RPT go off from the display and normal play resumes on the current track Random play Random play selects and plays individual tracks on the disc in no particular order This function continues automatically until it is cancelled 1 Press the RDM button RDM lights in the display and random play begins 2 To cancel random play press the RDM but ton again RDM goes off from the display and normal play resumes
72. r the title and cancel title input mode Triggered audio mute for cellular telephones This unit requires special wiring to mute the au dio signal automatically when a cellular tele phone rings in the car This function is not compatible with all cellular tele phones Contact your local authorized Clarion dealer for information on proper installation and compat ibility AUX function This system has an external input jack so you can listen to sounds and music from external devices connected to this unit DXZ845MC 27 8 OPERATIONS OF ACCESSORIES CD Changer Operations CD changer functions When an optional CD changer is connected through the CeNET cable this unit controls all CD changer functions This unit can control a to tal of 2 changers Press the FNC button and select the CD changer mode to start play If 2 CD changers are connected press the FNC button to select the CD changer for play Ulf NO MAGAZINE appears in the display insert the magazine into the CD changer DISC CHECK appears in the display while the player loads checks the magazine Ulf NO DISC appears in the display eject the maga zine and insert discs into each slot Then reinsert the magazine back into the CD changer Note Some CDs recorded in CD R CD RW mode may not be usable ACAUTION CD ROM discs cannot be played from every CD changer it s depended on the model Pausing play 1 Press th
73. re avec l appareil le plier et fapatir l aide d une pince par exemple Push in the protruding part as shown in the figure Empuje la parte saliente como se muestra en la figura Appuyez sur la pi ce faisant saillie comme indiqu sur la figure E Pr caution Retirer la languette en proc dant comme suit pour installer le module source sans la patte de montage universel 1 Retier la vis du module source Figure 5 2 Retirer la languette du module source Figure 6 3 Fixer la vis ainsi retir e sur le module source Figure 7 Fixer la vis fond Remarque Ranger la languette retir e en lieu s r avec le mode d emploi D Stopper Languette Tap n 2 Source Unit Module source Unidad de la fuente Figure 9 Figure 9 Figura 9 Figure 10 Figure 10 Figura 10 E AAA AAA B Montura fija Usando el soporte originalmente equipado en el veh culo Esta unidad ha sido dise ado para la Instalaci n fija en el tablero de instrumentos Si el veh culo est equipado con una radio instalada en f brica instale la unidad de la fuente con las piezas los tornillos marcados con Figura 11 Si el veh culo no est equipado con una radio instalada en f brica obtenga un juego de instalaci n para Instalar la unidad de la fuente mediante el procedimiento que se da a continuaci n 1 Asegure los soportes de montaje al chasis como se muestra en la Figura 11 Cuando la unidad de la fue
74. ription Gp Green H Vert Verde O FRONT RIGHT Gray Red Rear Left Trasero izquierdo Fil jaune fil de bus d alimentation _ REAR RIGHT Black Red OGreen Black Vert noir O Verde negro Conductor amarillo conductor de alimentaci n de bus x REAR LEFT Black White Connect directly to battery REAR RIGHT SUB WOOFER RIGHT Black Red Brancher directement la batterie 6 REAR LEFT SUB WOOFER LEFT Black White 4 Speaker system Fuse 3A Con ctelo directamente a la bater a SUB WOOFER RIGHT Violet Red yst me 4 haut parleurs ible BA Sistema con 4 altavoces iid SUB WOOFER LEFT Violet White O AUX INPUT RIGHT Red Red Red wire Power lead AUX INPUT LEFT Red White Fil rouge fil d alimentation 2 ZONE OUTPUT RIGHTGreen Red i Conductor rojo Conductor de i ide 2 ZONE OUTPUT LEFTGreen White oe Accessoire 12 V 9 Accesorio 12 V 2 Speaker system Syst me 2 haut parleurs Sistema con 2 altavoces AVANT DROIT Gris Rouge AVANT GAUCHE Gris Blanc ARRIERE DROIT Noir Rouge HEK Connect to remote turn on lead of amplifier Brancher au fil de mise sous tension t l commandable de amplificateur ARRIERE GAUCHE Noir Blanc OGray Gris Gris Con ctelo al conductor de conexi n autom tica de la 8 ARRIERE DROIT SUBWOOFER DROIT Noir Rouge Right alimentaci n del amplificador 8 ARRIERE GAUCHE SUBWOOFER GAUCHE
75. s If such discs are used the player may not work or the sound may skip Use a ball point pen or the like to remove any roughness from the edge of the disc Never stick labels on the surface of the compact disc or mark the surface with a pencil or pen Never play a compact disc with any cellophane tape or other glue on it or with peeling off marks If you try to play such a compact disc you may not be able to get it back out of the CD player or it may damage the CD player Roughness Do not use compact discs that have large scratches are misshapen cracked etc Use of such discs may cause misoperation or damage To remove a compact disc from its storage case press down on the center of the case and lift the disc out holding it carefully by the edges Do not use commercially available CD protection sheets or discs equipped with stabilizers etc These may damage the disc or cause breakdown of the inter nal mechanism Storage Do not expose compact discs to direct sunlight or any heat source Do not expose compact discs to excess humidity or dust Do not expose compact discs to direct heat from heat ers Cleaning To remove fingermarks and dust use a soft cloth and wipe in a straight line from the center of the compact disc to the circumference Do not use any solvents such as commercially avail able cleaners anti static spray or thinner to clean compact discs After using special c
76. s and workmanship for a period of one 1 year from the date of original purchase Clarion ProAudio products except for speakers are covered by a two 2 year limited warranty when purchased from and installed by an authorized Clarion dealer ALL PURCHASES OF CLARION PRODUCTS FROM NON AUTHORIZED CLARION DEALERS ARE SUBJECT TO FURTHER WARRANTY RESTRICTIONS AS DESCRIBED BELOW The conditions of this limited warranty and the extent of responsibility of Clarion Corporation of America Clarion under this limited warranty are as follows 1 PROOF OF DATE OF PURCHASE WILL BE REQUIRED FOR WARRANTY SERVICE OF THIS PRODUCT IN THE CASE OF THE TWO 2 YEAR LIMITED WARRANTY FOR CLARION PROAUDIO PRODUCT PROOF OF INSTALLATION BY AN AUTHORIZED CLARION DEALER IS REQUIRED INFORMATION ABOUT CLARION AUTHORIZED WARRANTY SERVICE CENTERS MAY BE OBTAINED BY CONTACTING OR WRITING CLARION AT THE ADDRESS LISTED BELOW 2 This limited warranty will become void if service performed by anyone other than an approved Clarion Warranty Service Center results in damage to the product 3 This limited warranty does not apply to any product which has been subject to misuse neglect or accident or which has had the serial number altered defaced or removed or which has been connected installed adjusted or repaired other than in accordance with the instructions furnished by Clarion 4 This limited warranty does not cover car static or other electrical interferences tape h
77. s and hold the P A button for 2 seconds or longer otherwise the auto store function is engaged and the unit starts storing stations Instant station recall ISR Instant station recall is a special radio preset that instantly accesses a favorite radio station at a touch of a button The ISR function even oper ates with the unit in other modes ISR memory 1 Select the station that you wish to store in ISR memory 2 Press and hold the ISR button for 2 seconds or longer Recalling a station with ISR In any mode press the ISR button to turn on the radio function and tune the selected radio station ISR appears in the display Press the ISR button again to return to the previous mode DXZ845MC 15 CD MP3 WMA Operations MP3 WMA What is MP3 MP3 is an audio compression method and clas sified into audio layer 3 of MPEG standards This audio compression method has penetrated into PC users and become a standard format This MP3 features the original audio data com pression to about 10 percent of its initial size with a high sound quality This means that about 10 music CDs can be recorded on a CD R disc or CD RW disc to allow a long listening time without having to change CDs What is WMA WMA is the abbreviation of Windows Media Au dio an audio file format developed by Microsoft Corporation Notes If you play a file with DRM Digital Rights Man agement for WMA remaining ON no audi
78. s from the track currently being played Folder random play This function allows you to play all the tracks of all the folders recorded on an MP3 WMA disc in a random order 1 Press and hold the RDM button for 1 sec ond or longer to perform folder random play The indications FOLDER and RDM light up in the display and Ey RANDOMW appear in the title display for about 2 seconds and then folder random play starts 2 To cancel folder random play press the RDM button again The play status indications such as FOLDER and RDM disappear from the display and normal play resumes from the track currently being played DXZ845MC 19 CD MP3 WMA Operations Play list mode This function allows you to play tracks up to lat est 5 time stamps by reading the play list infor mation written on the disc 1 Press and hold the PLAY LIST button for 1 second or longer to turn on or off the play list mode UPlay list play is possible only when there is a file whose extension is M3U on the CD R RW Up to 5 play lists can be recognized and up to 255 files can be recognized per play list 2 Press the lt d or gt button to change the track 3 Press the DN button to move to the previ ous play list Press the UP button to move to the next play list Notes The SCN RPT RDM functions cannot be used while in the play list mode The title display changes from folder name to play l
79. seros Monitor Moniteur Monitor SIRIUS satellite radio receiver R cepteur radio satellite SIRIUS Sintonizador SIRIUS de recepci n radio via sat lite 42 TV tuner module Module tuner TV M dulo sintonizador de televisi n D codeur surround 5 1 canaux Descodificador de 5 1ch surround Unidad de control de Descodificador de 5 1ch surround C bie de connexion optique Cable conector ptico Haut parleur central avec amplificateur Altavoz central con amplificador Altavoz de subgraves con amplificador Unidad externo Unidad de auriculares inal mbricos EN 8 GENERAL CAUTIONS PRECAUTIONS G N RALES PRECAUCIONES GENERALES 1 Do not open the case There are no user serviceable parts inside If you drop anything into the unit during installation consult your dealer or an authorized CLARION service center l appareil pendant l installation consulter votre revendeur ou un consulte su proveedor o a un centro de servicio autorizado por 2 Use a soft dry cloth to clean the case Never use hard cloth thinner Serviceapres Mente Agres CACI N CLARION benzen alcohol etc For tough dirt apply a little cold or warm water 2 Utiliser un chiffon doux et sec pour nettoyer le coffret ne jamais 2 Para limpiar la caja utilice un pafio suave y seco no use nunca un to a soft cloth and wipe off the dirt gentry utiliser un chiffon rigide un diluant du benzene de l alcool etc Pour
80. sitent un kit de montage sp cial pour une installation correcte Consulter le revendeur Clarion pour Notes 1 Some car models require special mounting kits for proper installation Consult your Clarion dealer for details les d tails 2 Serrer fermement la languette avant pour viter que l appareil pilote ne se desserre 2 Fasten the front stopper securely to prevent the source unit from coming loose Console opening dimensions Dimensions d ouverture de la console Dimensiones de la abertura de la consola Hole Trou Orificio Stoppers Languettes Retenes Trou Orificio Top Haut Parte superior t Screwdriver E Montaje universal 1 Coloque el soporte de montaje universal en el tablero de instrumen tos utilice un destornillador para doblar cada ret n del soporte de montaje universal hacia adentro y despu s asegure el ret n como se muestra en la Figura 4 2 Conecte los cables como se muestra en la Secci n 6 3 Inserte la unidad fuente en el soporte de montaje universal hasta que quede enganchado 4 Tenga cuidado con la partes superior e inferior de la pieza ornamen tal exterior y m ntela de forma que todos los ganchos queden bloqueados Notas 1 Algunos modelos de autom viles requieren juegos de montaje especiales para realizar la instalaci n apropiada Solicite los detalles a su proveedor Clarion 2 Apriete con seguridad el ret n frontal para evitar
81. sten Up For more information visit Heavy Metal Dance and many others liusradiocom Display Items Manual indication Stereo indication Operation status indication ADF Anti Distortion Filter indication Titles clock etc Disc Disc indication FOLDER Folder indication SCN Scan indication RPT Repeat indication RDM Random indication Satellite indication AEN Distortion 7 DAL H 2 ZONE MINT MEA H Function mode indication The names of modes being selected etc are displayed Mute indication Preset channel indication 1 to 6 Disc number indication 1 to 12 GIT Record indication JALEA BASS EXTEND indication 901 Pi Music Catcher mode ITRHI indication indication WMA indication 2 ZONE 2 ZONE indication Main indication AT Sub indication LCD Screen In extreme cold the screen movement may slow down and the screen may darken but this is normal The screen will recover when it returns to normal temperature 8 DXZ845MC 5 The control panel can be detached to prevent theft When detaching the control panel store it in the DCP DETACHABLE CONTROL PANEL case to prevent scratches We recommend taking the DCP with you when leaving the car Removing the DCP 1 With the SLOPING CONSOLE closed turn off the power 2 Press the RELEASE button deeply
82. t play is performed SCN button Perform scan play for 10 seconds of each track Disc scan play is performed when the button is pressed and held gt I button Play or pause a CD or DVD lt d gt buttons Select a track when listening to a disc Press and hold the button for 1 second or longer to switch the fast forward fast backward BND button Move the next disc in increasing order When the TV is connected U For details see the section TV operations P A button Perform preset scan while in the TV mode When the button is pressed and held auto store is performed DIRECT buttons Store a station into memory or recall it directly gt I button Switch the TV picture mode or VTR external picture mode lt lt W buttons Selecta station BND button Switch the band When the button is pressed and held switch seek tuning or manual mode O When the Sirius Satellite Radio is connected U For details refer to the Owner s Manual provided with the Sirius Satellite Radio P A button Performs category scan while in the SIRIUS mode When the button is pressed and held preset scan is performed DIRECT buttons Stores a station into memory or recall it directly while in the SIRIUS mode gt I button Select a category lt 4 W button Press the button to select a station FNC button Press the button to switch the operation mode a
83. tes The volume changes each time the ADF Anti Dis tortion Filter setting is switched Turn down the volume and the sub woofer volume before per forming a switching operation Sufficient effects cannot be obtained with some speaker systems In such cases adjust the vol ume Adjusting the tone Press the A M button and select the item to adjust Each time you press the A M button the item changes as following order e When ADF 1 2 3 is set SW VOL 0 gt BALANCE 0 FADER 0 gt Last function mode e When ADF OFF is set SW VOL 0 gt BASS GAIN gt TREB lt GAIN gt gt BALANCE 0 gt FADER 0 gt Last function mode Note e As subwoofer is effective SW VOL 0 can be selected Adjusting the Subwoofer UThe factory default setting is SW VOL 0 UThis function can be adjusted only when the subwoofer output is set to ON For details on Se lecting the Subwoofer refer to the section Op erations Common to Each Mode of each owner s manual 1 Press the A M button SW VOL 0 appears in the display 2 Turning the ROTARY knob to select from 6 to 6 3 When the adjustment is complete press the A M button several times until the function mode is reached Adjusting the bass Gain Frequency Q curve This adjustment can be performed when the ADF Anti Distortion Filter is set to ADF OFF 1 Press
84. tteries Functions of Remote Control Unit Buttons OPERATIONS Basic Operations Radio Op8rTatl fiS r T CD MP3 WMA Operations uU e i d tc diei pe sega edv MUSIC CATCHER Operations ciue meer ecc Different Pieces of Music Heard by Plural Listeners 2 ZONE function e Operations Common to EacliMOde icri cei edd i ci d RE ee need OPERATIONS OF ACCESSORIES a CD Changer Operations TV Operation Si u u M IN CASE OF DIFFICULTY rr ne 10 ERROR DISPLAYS ener eer n tte e i cete seti a T1 iier Citta PEE eO OE liado 1 FEATURES 2 MUSIC CATCHER for recording CDDA MP3 and WMA File Playable with ID3 TAG and WMA TAG Display Motorized Sloping Console Detachable Faceplate in Aluminium with 80 Variable Color LCD and Control Buttons ADF Anti Distortion Filter 6ch RCA output and 2ch AUX input with 3 level adjustments Retractable Rotary Volume for Easy Operation Sirius Control DXZ845MC 2 PRECAUTIONS 1 When the inside of the car is very cold and the player is used soon after switching on the heater moisture may form on the disc or the optical parts of the player and proper playback may not be possible If moisture forms on the disc wipe it off with a soft cloth If moisture
85. ver here s how 1 Contact us at siriusradio com or call toll free 1 888 539 SIRIUS 7474 2 Have 3 items on hand A valid credit card or branded debit card Sirius ID or Electronic Serial Number check on the receiver box or your display control window Your vehicle identification number VIN Activate today to get 10096 commercial free music plus a Welcome Kit with a detailed Channel Guide SIRIUS HIA S bLEX COMMERCIAL FREE v SIRIUS VARIETY
86. w when this source unit is installed without the universal mounting bracket 1 Remove the screw from the source unit Figure 5 2 Remove the stopper from the source unit Figure 6 3 Install the remove screw to the source unit Figure 7 Securely attach the screw Note Store the removed stopper in a safe place together with the Instruction Manual Example 1 Exempie 1 Ejemplo 1 D Stopper Languette Tap n Source Unit Module source Unidad de la fuente 3 Screwdriver Toumevis Destornillador Screw Vis Tornillo Figure 5 Figure 5 Figura 5 Figure 6 Figure 6 Figura 6 RESP HIN DENN EU TTL EE OES SENOS LEERLO W Fixed Mount Using the bracket originally equipped in vehicle This unit is designed for fixed installation in the dashboard If the vehicle is equipped with a factory installed radio install the source unit with the parts and screws marked X Figure 11 If the vehicle is not equipped with a factory installed radio obtain an installation kit to install the source unit in the following procedure 1 Secure the mounting brackets to the chassis as shown in Figure 11 When the source unit is installed without the universal mounting bracket holes exist modification such as drilling new holes of the mounting brackets may be required for other models 2 Wire as shown in Installation Section 6 3 Secure the unit in the dashboard and then reassemble the dashboard and the center panel Mounting br
87. xternal equip ment AUX gt CD changer gt DVD changer gt TV 3 AUX UThe name of equipment that is not connected to this unit is not displayed To change a current musical performance etc press the button that controls the selected source SCN button etc O Example for source change Oparation MAIN zone SUB zone 2 ZONE Radio playback Radio playback turned off y y 2 ZONE Radio playback turned on 2 2 Radio playback Radio playback turned off y Y Source External External change equipme equipment CD changer changer y y 2 ZONE External Radio playback turned on equipme changer Adjusting the sound level for the MAIN zone You can adjust the sound level only for the MAIN zone To adjust the sound level for the SUB zone adjust it in the headphone WH104 WH204 side Turning the ROTARY knob to adjust the sound level for the MAIN zone Counterchanging the sources of the MAIN and SUB zones You can supersede the music sources of the MAIN and SUB zones Press and hold the ISR button for 1 second or longer to counterchange the sources of the MAIN and SUB zones REVERSE is displayed for 2 seconds on the display DXZ845MC 23 Operations Common to Each Mode Setting the clock 1 6 7 Press and hold the T button for 1 second or longer to switch to the adjustment selection display Press the lt d or gt button to select CLOCK 3
88. y copying on a music recorder cannot be recorded MP3 WMA discs cannot be recorded Some CDs may show a subtractive time indi cation in the area between tracks when they are played back A between tracks area is not recorded in such a CD In recording using MUSIC CATCHER some amount of silent time is created between the tracks If the disc contains some tracks that have been already recorded the other tracks are recorded Folder and file names are added automatically during recording These folder and file names cannot be changed The file names corre spond to the track Nos on the CD If the disc is not recordable NO REC DISC shows on the display If the disc contains some tracks previously re corded INCLUDED shows on the display If there is no empty folder available FOLDER FULL shows on the display When the memory capacity is used up MEMORY FULL shows on the display and recording is canceled MUSIC CATCHER Operations Recording cannot be performed during SCN RPT and RDM In such cases BUSY shows on the display The H lt 4 gt BND and SCN PRT RDM buttons are invalid during recording When these buttons are pressed INVALID shows on the display Recording operation REC function Recording using MUSIC CATCHER is per formed in the CD MP3 mode and the following 2 recording modes are available TRACK REC to record only one track currently being played

Clarion DXZ845MC CD Player

Contents

Download Pdf Manuals

Related Search

Related Contents