Yamaha YST-MSW10 Computer Speakers
Contents
1. Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them paying particular attention to cords at plugs convenience receptacles and the point where they exit from the unit Cleaning The unit should be cleaned only as recommended by the manufacturer Nonuse Periods The power cord of the unit should be unplugged from the outlet when left unused for a long period of time Object and Liquid Entry Care should be taken so that objects do not fall into and liquids are not spilled into the inside of the unit Damage Requiring Service The unit should be serviced by qualified service personnel when A The power supply cord or the plug has been damaged or B Objects have fallen or liquid has been spilled into the unit or C The unit has been exposed to rain or D The unit does not appear to operate normally or exhibits a marked change in performance or E The unit has been dropped or the cabinet damaged Servicing The user should not attempt to service the unit beyond those means described in the operating instructions All other servicing should be referred to qualified service personnel Power Lines An outdoor antenna should be located away from power lines Grounding or Polarization Precautions should be taken so that the grounding or polarization is not defeated System Example Ejemplo del sistema Personal Compu2. warnings on the unit and in the operating instructions should be adhered to Follow Instructions All operating and other instructions should be followed Water and Moisture The unit should not be used near water for example near a bathtub washbowl kitchen sink laundry tub in a wet basement or near a swimming pool etc Carts and Stands The unit should be used only with a cart or stand that is recommended by the manufacturer 6A A unit and cart combination should be moved with care Quick stops excessive force and uneven surfaces may cause the unit and cart combination to overturn Wall or Ceiling Mounting The unit should be mounted to a wall or ceiling only as recommended by the manufacturer Ventilation The unit should be situated so that its location or position does not interfere with its proper ventilation For example the unit should not be situated on a bed sofa rug or similar surface that may block the ventilation openings or placed in a built in installation such as a bookcase or cabinet that may impede the flow of air through the ventilation openings Heat The unit should be situated away from heat sources such as radiators stoves or other appliances that produce heat Power Sources The unit should be connected to a power supply only of the type described in the operating instructions or as marked on the unit 12 13 14 15 16 17 18 Power Cord Protection
3. YAMAHA SUBWOOFER SYSTEM i gt Active Servo Technology OWNER S MANUAL MANUAL DE INSTRUCCIONES RISK OF ELECTRIC SHOCK DO NPT OPEN bs CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER OR BACK NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL e Explanation of Graphical Symbols The lightning flash with the arrowhead symbol within an equilateral triangle is intended to alert you to the presence of uninsulated dangerous voltage within the product s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons The exclamation point within an equilateral tri angle is intended to alert you to the presence of important operating and maintenance servic ing instructions in the literature accompanying the appliance WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE IMPORTANT Please record the serial number of this unit in the space below Model Serial No The serial number is located on the rear of the unit Retain this Owner s Manual in a safe place for future reference SAFETY INSTRUCTIONS 10 Read Instructions All the safety and operating instructions should be read before the unit is operated Retain Instructions The safety and operating instructions should be retained for future reference Heed Warnings All
4. hone to Mini plug adaptor x 1 Specifications subject to change without notice YAMAHA YAMAHA CORPORATION
5. ignal to other equipment LINE 2 These RCA pin jacks are for inputting speaker level signals to the YST MSW 10 They can be connected directly to the speaker outputs of a stereo amplifier Controls Front Panel Refer to page 2 4 POWER Switch and Indicator Press to power on the YST MSW 10 the power indicator will light up Press again to power off Before powering on and off turn down the VOLUME control 5 HIGH CUT Switch This switch selects the high cut filter frequency Set it to either LOW or HIGH 6 VOLUME Control Use this control to set the volume level Turn it clockwise to increase the volume and counterclockwise to reduce it Auto Power On Off Function When powered on if no input signal is received after 5 10 minutes the power is switched off automatically When an input signal is received the power is switched back on automatically This function works only when the power switch is in the on position Specifications Type Active Servo Processing Subwoofer System Amplifier output 25 W 4 Q THD 10 100 Hz High Cut Filter Low High Pressure Level 98 dB max Capacity 8 01 Frequency response 35 to 250 Hz 10dB Speaker unit 6 3 16 cm cone woofer magnetic shielding Power supply AC 120 V 60 Hz Power consumption 25 W Dimensions W x H x D 280 11 x 200 7 9 x 248 5 9 8 mm Weight 5 5 kg 12 1 lbs Accessories Mini plug cable x 1 RCA pin to Mini plug adaptor x 1 1 4 P
6. lace the unit at least 10 cm 4 inches away from the wall Also do not position with the rear panel facing down on the floor or other surface e Always disconnect from the AC receptacle before making any connections e YST MSW10 does not contain any user serviceable parts Refer all servicing to your Yamaha dealer Do not expose the YST MSW 10 to temperature extremes direct sunlight excessive dust humidity or vibration e Site the YST MSW10 on a level stable surface Do not drop the YST MSW 10 apply excessive force to its controls or put heavy items on top of it If the YST MSW10 should require cleaning use a soft cloth If necessary a damp cloth e Do not to put some objects into it If doing so the sound will be unnatural or it may cause damage to the speaker and or amplifier To protect the YST MSW 10 speaker avoid microphone feedback continuous and excessive output from electronic musical instruments excessive signal distortion e Although the YST MSW 10 is magnetically shielded keep floppy disks and tapes away from it The YST MSW 10 may cause picture distortion when sited close to a television or computer monitor In this case move it away a little Connections Refer to page 1 for system connections Rear Panel Refer to page 2 pag LINE 1 IN This 3 5 mm stereo jack connection is for inputting line level signals to the YST MSW10 LINE 1 OUT This connection can be used to feed the input s
7. ter Portable CD Player gt HER r GP Speaker System with Connecter for Subwoofer O OL IS ar m N S I 11100 WAT II a 2 Q sa e Tour ea Ge Bee DCV se A YAMAHA 3 i YAMAHA YST MSW10 Personal Computer Portable CD Player 7 HHH r GP YST M10 Speaker System with Built in Amp seo Se AA O m OSAL mm gyteur O To Left Bei Speaker SER NO Front Panel amp Rear Panel Panel delantero y Panel trasero YAMAHA YSrusw T MSW10 120 VOLTS 25 WATTS 60Hz YAMAHA CORPORATION MADE IN MALAYSIA V844750 1 UC YAMAHA ACTIVE SERVO PROCESSING Des SUBWOOFER SYSTEM YST MSW10 Technology HIGHCUT D HIGH m low VOLUME Thank you for purchasing a Yamaha YST MSW10 Subwoofer System Yamaha s Active Servo Technology offers exceptional high performance Cautions Please read the following operating precautions before use When disconnecting the power cord from an AC receptacle hold and pull the plug not the cord e If the YST MSW 10 is not going to be used for a while disconnect it from the AC receptacle Since this unit has a built in power amplifier heat will radiate from the rear panel Therefore p
Download Pdf Manuals
Related Search