Home

JVC DRMH20 DVD Recorder

1. IMPORTANT When you set L 2 SELECT to SAT VIDEO or S VIDEO lt pg 61 itis possible to view a satellite broadcast with the TV set to its AV mode even if the unit is turned off When the unit is in Stop mode or recording press TV AV VIDEO on the remote control to turn off the VIDEO lamp on the unit e f you turn on the unit when the satellite receiver s power is off nothing appears on the TV screen In this case turn on the satellite receiver or set the TV to its TV mode or press TV AV VIDEO on the remote control to set the unit to the AV mode SYSTEM CONNECTIONS Ey 65 Perfect Connections Recommended This is an example of recommended connections if your TV has two 21 pin AV input SCART connectors Connect the decoder to the satellite receiver s connector if you have a decoder L 1 IN OUT connector to TV s connector and L 2 IN DECODER connector to the satellite receiver s connector Then connect the satellite receiver and TV NOTES e Set L 2 SELECT to VIDEO or S VIDEO pg 61 e You can use the Automatic Satellite Programme Recording function pg 48 with this connection e To record a programme via the satellite receiver select L 2 mode by pressing PR so that L 2 appears on the front display panel e To receive a scrambled broadcast desc
2. Discs without cartridges Disc tray Place the disc on the disc tray with the label side facing up Since disc size changes depending on the disc to be played back be sure to correctly align the disc with the grooves for its size If the disc is not in its groove it may be scratched or otherwise damaged To insert an 8 cm disc place it according to the inner groove DVD RAM discs contained in cartridges Double sided discs Remove the disc from the cartridge Align the disc with the grooves on the disc tray as shown in the illustration and insert with the side you wish to play back or record facing down If you insert the disc with Side A facing down programmes are recorded on the side A Single sided discs Remove the disc from the cartridge Align the disc with the grooves on the disc tray as shown in the illustration and insert with the label side facing up Care And Handling Of Discs How to handle discs When handling a disc do not touch the surface of the disc Since discs are made of plastic they are easily damaged If a disc gets dirty dusty scratched or warped the images and sound will not be picked up correctly and such a disc may cause the unit to malfunction Label side Do not damage the label side stick paper to or use any adhesives on its surface Recording side Make sure that discs are not scratched and dirty on the recording side befor
3. 31 Adjusting The Picture Quality 32 Angle Selecll Di dese 28 Audio Channel Selection 29 Audio Language Sound Selection 29 Auto Channel Set 70 C Cancel And Change Programmes 47 Check Programmes stante ro var iov pee s 47 D B ITCSNSU CMT TE 51 DISC MENU ETT E S 26 Disc Remaining Time 36 39 Disc RESUME etree toe ume 68 Discs For Playback Only 6 A 26 Elapsed Recording Time Indication 36 39 F Pile Structure ON DISCS Ainge eis cv rota os 7 Free Rate Function cccccecceceececseceeeeceeeeeeeeeeeeeees 37 G Guide Program Number iredi 70 High Speed Search qx dee toto e p oreet 26 40 Instant Timer Recording 36 39 WALSH ACE SCAN sec urea cit dictan etus oto lucet um AA 69 J Jump soU 43 JUST ClOCK Em 79 L Leter BOX RR 22 LIV Memo neona N 41 Live Memory Recording 43 M Manual Channel Set 71 Marking Position
4. 27 40 Still Picture Frame By Frame Playback 27 40 oubtitle SelectlOI run 28 T Temporary Recording 41 Tie S CARCI edu ioc IE lud 32 TOD MIC Ul E Em 26 U Uriplayable 01566 20 6 V VPS PDC Recording esee 45 MEMO 87 VICTOR COMPANY OF JAPAN LIMITED COPYRIGHT 2004 VICTOR COMPANY OF JAPAN LTD EN Printed in Germany 0604MNH ID VE S0 HIN HQ
5. you play back DVD VIDEO discs recorded for wide screen TVs 3 Press lt gt to select VIDEO IN DVD VIDEO SET UP FUNCTION SET UP INITIAL SET UP OUT then press V REC PLAY SETUP DISPLAY SET eo e Turn on the unit 4 Press AV to select MONITOR Turn on the TV and select the AV mode TYPE then press ENTER L OUTPUT SCARTVIDEO e Slide the TV CABLE SAT DVD switch to DVD 5 Press AV to select the desired option then press ENTER eme SETUP p amp amp ENTER SELECT WITH THEN PRESS ENTER Press SET UP to complete the Er 9 sepor PPESSISET UPI TO EXIT setting D e olo eJ CABLE SAT The boldface settings below indicate the settings at your purchase MONITOR TYPE 4 3LB 4 3PS 16 9 AUTO 16 9 FIX 4 3LB Letter Box conversion Select this when the aspect ratio of your TV is 4 3 conventional TV While viewing a wide screen picture the black bars appear on the top and the bottom of the AV lt gt Screen 4 3PS Pan amp Scan Select this when the aspect ratio of your TV is 4 3 conventional TV While viewing a wide screen picture the black bars do not appear however the left and right edges of the pictures will not be shown on the screen 16 9 AUTO Wide television conversion Select this when the aspect ratio of your TV is 16 9 wide TV 16 9 FIX Wide television conversion Select this when the aspect rat
6. DT ms 38 Recording Features nennen 39 Basic ACK bobus taa ova 40 Pl yback Features e eue quta Con abd Mo UO RN HO aes 40 Live Memory 4 neret der a ie eu Hare tette 41 TIMER RECORDING 44 SHOWVIEW Timer Programming 44 Manual Timer Programming 46 Automatic Satellite Programme Recording 48 NAVIGATION 49 Library Database Navigation 49 Modify Original Information 50 Modify Play List Information 52 Modify Library Information 54 Playback With MP3 JPEG Navigation 55 EDITING 56 High Speed Dubbing From HDD To 0 56 Just Dubbing From HDD 0 56 Manual Dubbing From HDD To DVD 57 Original Dubbing From DVD To HDD 57 DV DUDO PET 58 Edit From A Camcorder 59 Edit To Or From Another Recorder 60 M 61 Digital Aud
7. Il to find the edit in and edit out points e The edit out point must come after the edit in point 8 Press AV lt D to select PREVIEW then press ENTER to preview the play list 9 Press AV lt D to select OK then press ENTER The play list is created To modify the points Press lt gt to select MODIFY then press ENTER Hepeat steps 5 9 as necessary Press 4 gt to select EXIT then press ENTER to return to the normal screen NOTES e There may be a discrepancy of several seconds between the scene you intend to edit and the scene which is actually edited e The title index and category of the play list can be modified in the same way as ORIGINAL pg 50 e You can modify the play list that has just been created here by adding moving or deleting unwanted parts to create a digest edition etc Edit Scenes Press EDIT The Editing screen appears 2 Press AV lt P to select MODIFY under PLAY LIST then press ENTER 3 Press AV lt D to select a play list to modify then press ENTER Press AV lt I gt to select SCENE then press ENTER 5 Press AV lt D to select MODIFY then press ENTER TOTAL 8 E SELECT TITLE DELETE Press AV lt I gt to select a scene to modify then press ENTER 7 Perform steps 5 10 in Create Play List pg 53
8. is set to ON the menu Instant Timer Recording ITR function does not work pg 68 e When the recording capacity becomes full during timer recording or Instant Timer Recording the unit automatically performs Relief Recording lt pg 46 Watch Another Programme While Recording On The Unit While recording is going on you can watch another programme on the TV by using the TV s tuner NOTE It is required that the remote control is set to be able to operate the TV in advance gt pg 63 1 During recording press TV AV VIDEO to select TV mode e Video mode is disengaged and the video lamp VIDEO on the unit is turned off e The programme received on the TV s tuner is displayed on the TV Screen 2 Slide the TV CABLE SAT DVD switch to TV Press repeatedly to select the desired channel NOTE If a decoder is connected to the unit lt pg 66 you can select a scrambled channel as well as other normal channels Elapsed Recording Time And Disc Remaining Time Indication During recording press DISPLAY repeatedly until the desired indication appears on the front display panel e Each time you press DISPLAY the time indication changes as follows Elapsed recording time Disc remaining time Clock Back to the beginning Free Rate Function To record the entire programme the unit automatically sets the appropriate recording mode depending on the combination of th
9. CANCEL NAVIGATION CLEAR ON SCREEN How To Access The On screen Bar 1 Press ON SCREEN twice whenever disc is loaded Contents of the on screen bar during playback DVD VIDEO TITLE 99 TRACK 99 EACH 0 00 DVD 3D ON CINEMA T2 1 VIDE Spe 9 Om TI E 2 BI BI de Video CD SVCD TRACK 99 EACH 0 00 CINEMA JPEG disc GROUP 99 TRACK 99 EACH 179 59 4 5 SEC CINEMA Sh fb odd i Disc type Select this for Repeat Playback gt pg 31 Select this for A B Repeat Playback gt 31 Select this for search function pg 31 Select this for time search function pg 32 Select this to switch Simulated Surround Effect function pg 32 Select this for Picture Control function gt pg 32 Select this to switch picture source lt pg 33 Current status area for the selected item Select this for Programme Playback c pg 33 Select this for Random Playback gt pg 33 Select this to control the switching interval of the slide show lt gt pg 33 NOTE Although examples of the on screen bar are provided here only for 3 types of discs the on screen bar will be displayed for whichever disc indicated in the left column e feo e a Basic Operation The On screen Bar Example When selecting Pic
10. to be played back continuously id press MEMO after selecting the iy TE 408 a desired play lists The numbers of ELEM the playback order appear on the index You can select up to 30 play lists e When you want to correct the order move the arrow to the desired index and press MEMO The number disappears and the unit re numbers the other play lists automatically e When you want to cancel the order press CLEAR Press lt gt to select BEGINNING then press ENTER The playback starts 5 Press II to pause playback To resume normal playback press Press to stop playback 1 EXT lt SELECT 54 en NAVIGATION Delete Play List 1 Press EDIT The Editing screen appears 2 Press AV lt P to select DELETE under PLAY LIST then DVD DVD Audio press ENTER RAM VIDEO CD Press AV lt I gt to select one play list you want to delete then Modify Library Information ress ENTER Title information can be registered in the unit s memory for up to j 600 DVD discs 2 000 titles It is helpful when finding a desired title Press lt gt to select DELETE then press ENTER or play list by sorting according to the sort options registered e When you cancel the deletion select CANCEL then press ENTER during or after recording D Press EDIT to return to the normal screen NOTE e Turn on the TV and select the AV mode e Slide the TV CABLE SAT DVD switch to
11. AUDIO REC NICAM MONO You can select the desired NICAM audio channel to be recorded on a DVD R RW Video mode disc NICAM To record the main and sub language of NICAM audio MONO To record the standard monaural sound of NICAM audio NOTE This function works only for the NICAM bilingual programme DIRECT REC OFF ON When this function is set to ON you can easily start recording the programme that you are watching on your TV Press and hold and press on the remote control or press 6 on the unit NOTES e When you use the Direct Rec function be sure to use a TV offering T V LINK etc and connect a fully wired 21 pin SCART cable between the unit and the TV pg 17 e If DIRECT REC is set to OFF the 6 button functions as described in Basic Recording pg 35 38 e During Direct Rec appears on the front display panel f a programme is recorded with the Direct Rec the station name will not be registered in the library will be displayed for the station name e Even if there is no power supply for more than 60 minutes the unit keeps the setting INPUT COLOUR SYSTEM PAL SECAM You can play back PAL discs or record PAL and SECAM signals on this unit Select the appropriate colour system PAL To record PAL signals SECAM To record SECAM signals JUMP TIME 15 MIN 30 MIN 1 HR You can locate a scene ahead of or behind the
12. Press AV to select the appropriate setting then press ENTER 4 Press SET UP to complete the setting M MUN FUNCTION SET UP MI INEST UT REC PLAY SET UP DISPLAY SET VIDEO IN OUT MONITOR TYPE 4 3LB F 1 INPUT VIDEO L 1 INPUT VIDEO L 1 OUTPUT The boldface settings below indicate the settings at your purchase L 2 SELECT VIDEO S VIDEO SAT VIDEO SAT S VIDEO DECODER Select VIDEO or S VIDEO to use this unit as the recording deck with the player connected to the L 2 IN DECODER connector or to use the satellite receiver connected the L 2 IN DECODER connector VIDEO If a connected appliance s output is compatible only with regular video signals set to VIDEO S VIDEO If a connected appliance s output is compatible with Y C signals set to S VIDEO You can obtain high quality picture For connection be sure to use a 21 pin SCART cable that is compatible with the Y C signal Select SAT VIDEO or SAT S VIDEO to view a satellite programme with the TV set while the unit is turned off gt pg 65 SAT VIDEO If a connected satellite receiver s output is compatible only with regular video signals set to SAT VIDEO SAT S VIDEO If a connected satellite receiver s output is compatible with Y C signals set to SAT S VIDEO You can obtain a high quality S VHS picture For connection be sure to use a 21 pin SCART cable
13. only is selectable while stopped For JPEG MP3 GROUP SEARCH or TRACK SEARCH is selectable For Video CD SVCD Audio CD TRACK is selectable GROUP 99 TRACK 99 EACH 179 59 DVD 5 CINEMA m C5 9 Ea TITLE SEARCH a 4 Press the number keys to enter the desired item number then press ENTER e Playback starts from the selected section Examples To select track 5 press the number key 5 To select track 15 press the number key 1 and 5 To select track 25 press the number key 2 then 5 If you have specified a wrong selection Press CANCEL X or CLEAR W to clear the wrong number then enter the correct one before you press ENTER in this step To clear the on screen bar Press ON SCREEN NOTES e When 6 is displayed on the TV screen in step 4 the chapter you have selected is not contained in the disc or chapter search does not work on the disc e Before you press ENTER playback may start automatically when you enter the section s number depending on the disc e This function is not possible for a Video CD SVCD with PBC function e 32 EN BASIC OPERATIONS ON DVD DECK CABLE SAT TV DVD 0 9 CANCEL ENTER 44 gt gt CLEAR ON SCREEN Time Search DVD DVD Audio Tz E3 Ed Ed You can play back a disc from the desired point by specifying the
14. MM JVC DVD amp HDD VIDEO RECORDER DR MH30S DR MH20S FIRST P See AUTO SET UP on PAGE 18 DIGITAL voeo INSTRUCTIONS 4 SHOWVIEW DELUXE 2 SAFETY FIRST Safety Precautions IMPORTANT Please read the various precautions on page 2 and 3 before The rating plate and the safety caution are on the rear of the unit installing or operating the unit WARNING DANGEROUS VOLTAGE INSIDE it should be noted that it may be unlawful to re record pre WARNING TO PREVENT FIRE OR SHOCK HAZARD DO NOT recorded tapes DVDs or discs without the consent of the EXPOSE THIS UNIT TO RAIN OR MOISTURE owner of copyright in the sound or video recording broadcast or cable programme and in any literary dramatic musical or artistic work embodied therein CAUTION A UNIT IS A CLASS 1 LASER PRODUCT HOWEVER THIS UNIT USES A VISIBLE LASER BEAM WHICH COULD CAUSE CAUTION HAZARDOUS RADIATION EXPOSURE IF DIRECTED BE SURE TO OPERATE THE UNIT CORRECTLY AS When you are not using the unit for a long period of time it is INSTRUCTED recommended that you disconnect the power cord from the mains outlet WHEN THIS UNIT IS PLUGGED INTO THE WALL OUTLET DO Dangerous voltage inside Refer internal servicing to qualified NOT PLACE YOUR EYES CLOSE TO THE OPENING OF THE serv
15. Press TOP MENU or MENU to access the DVD menu 2 Press AV lt I gt to select a desired title then press ENTER Playback starts e t may be possible to select the desired item using the number keys depending on the menu display NOTE When O appears on the TV screen in step 1 the disc does not have a top menu or disc menu 2 2 2 Example Locating The Start Point Of The Item Or Skip The Item DVD DVD Audio E kd E31 E2 E3 Press 4 4 or gt gt during playback e Pressing gt gt locates the start point of the item or skips the item for forward direction then resumes playback e Pressing 4 4 locates the start point of the item or skips the item for reverse direction then resumes playback When a DVD RAM RW R disc is played Current programme Previous Next News Drama Movie programme programme Reverse 4 PPI P Forward e marked points lt pg 27 Example To locate the beginning of the next item press gt once To locate the beginning of the current item press 4 4 once To locate the beginning of the previous item press 144 three times When a DVD VIDEO Audio CD or Video CD SVCD disc is played Playback point Scene 3 Scene 4 Chapter 3 Chapter 4 Or Or Or Track 2 Track 3 Track 4 Scene 2 Chapter 2 Reverse a 44 PP gt Forward Example To locate the beginning of the next item press gt once To
16. e If GUIDE PROGRAMME IS NOT SET SET GUIDE PROGRAM THEN RETRY appears on the TV screen set Guide Program Numbers manually pg 70 3 PROGRAMME gt SHOWVIEW 1 2 E PRESS PROGRAMME TO EXIT RECORD TO PROGRAMME ENTER Se CN NI 77 TM eee come 7 The SHOWVIEW number you entered and the matching timer recording information are displayed on the TV screen Check the programme data e To cancel this setting press RETURN IMPORTANT Make sure the channel position number you wish to record is displayed if not see SHOWVIEW System Setup pg 70 and set the Guide Program number correctly 8 Press V to select the desired recording option as required Press AV to select the desired setting then press ENTER e INPUT TITLE lt pg 50 Modify Title Name e CATEGORY pg 51 Modify Category e VPS PDC pg 45 VPS PDC Recording WEEKLY DAILY pg 45 Weekly Daily Recording REC pg 35 Recording Mode 9 Press AV to select OK then press ENTER to access the Programme Confirmation screen Press lt gt to select EXIT then press ENTER to complete timer programming e To programme another timer press lt gt to select CONTINUE then press ENTER e f PROGRAMME OVERLAPPED appears on the TV screen see page 47 NOTES e There may be cases that SHOWVI
17. gt to select your desired audio language sound e Each time you press AUDIO or 1 gt the audio language sound changes e To clear the Audio Language Sound selection display press ENTER NOTES e When appears on the TV screen no audio language is recorded e When the audio language won t be changed with the procedure above change the audio on a disc menu displayed by pressing MENU e is only possible to select the audio language in stop mode The audio language cannot be selected during playback 4128 P ENGLISH When 3 audio languages are contained Audio Channel Selection kd E Et E ES When watching bilingual programmes or playing discs on which you recorded bilingual or stereo programmes you can choose the desired audio channel e When SUPERIMPOSE is set to AUTO you can confirm on the TV screen the audio channel you have chosen 69 e Each time you press AUDIO the audio channel changes TRACK On Screen Display O q1 ub O 4 b programme For main audio of bingual programme For sub audio programme Foraucio of right crann NOTE It is not possible for DVD R DVD RW Video mode disc playback to switch the audio channel The audio channel is played back as set in VIDEO MODE RECORDING AUDIO setting lt pg 68 41 ODL nb OD b BASIC OPERATIONS ON DVD DECK 2
18. or SAT S VIDEO pg 61 e f Just Clock is set to ON the units clock is automatically adjusted at the start end of Summer Time e Just Clock may not function properly depending on the reception condition Just Clock The Just Clock function provides accurate time keeping through automatic adjustments at regular intervals by reading data from a PDC signal The Just Clock option can be set to ON or OFF at the Clock Set screen the default setting is OFF IMPORTANT If you turn off Just Clock the accuracy of your unit s built in clock may be reduced which could adversely effect timer recording We recommend you to keep Just Clock on In cases where the clock setting data from a PDC signal is incorrect however you are advised to keep Just Clock set to OFF 74 SUBSIDIARY SETTINGS Press SET UP to access the Main Menu screen EW E Lr 2 Press lt I gt to select HDD DVD SET UP then press V RAM VIDEO CD 3 Press lt gt to select DISC SET HDD DVD SET UP eie NIU EST E UT Some DVD RAM RW discs are unformatted ri Format the disc when you use unformatted disc or you want to Press AV lt gt to select delete all recordings and data on the disc FORMAT then press ENTER Press lt gt to select OK then FORMAT ATTENTION press ENTER 62 e When a disc is formatted all recordings a
19. pg 61 Progressive scan is output only from COMPONENT VIDEO OUT connector Programme Playback DVD DVD NIU Audio RAM VIDEO CD You can programme up to 30 tracks Video CD SVCD or Audio CD to play back in the desired order While stopped Press ON SCREEN twice to access the on screen bar 2 Press lt gt to select PRGM then press ENTER The programme table appears under on screen bar TRACK 99 EACH 0 00 CINEMA WP E 3 Press the number keys to USE 0 9 p TO ee og enter the track numbers in the ere 7 9 10 desired order 12 43 14 15 16 47 18 11 19 20 Examples ERES EET To select track 5 press the c a T umber key 5 and ENTER To select track 15 press the PROGRAMME TOTAL TIME 0 00 umber key 1 and 5 To select track 25 press the number key 2 and 5 If you have specified a wrong selection Press CANCEL X The last selection is erased Or press CLEAR The whole selection is erased gt 5 gt BASIC OPERATIONS ON DVD DECK 33 4 Press gt Playback starts in the programmed order e When all of the programmed tracks have been played back Programme Playback stops but the programmed information remains e To add tracks to the end of the programme perform steps 1 through 3 e During Programme Playback pressing gt l skips to the next
20. 5 Press I to pause playback Select the input mode on the connected digital audio device 7 Press to start playback on the unit 8 Start recording on the digital audio device 9 Stop recording on the digital audio device Then press M to stop playback on the unit NOTE There may be a discrepancy of several seconds between where you intend editing to start and where it actually starts Remote Control Functions Remote Control 1 2 3 4 Code Switching The remote control is capable of controlling four JVC video units independently Each of the units can respond to one of four codes 1 2 3 or 4 The remote control is preset to send 3 code signals because your unit is initially set to respond to 3 code signals You can easily modify your unit to respond to 1 2 or 4 code signals Slide the TV CABLE SAT DVD switch to DVD m 00 Fa D O I OLO zz dd CABLE SAT ENTER e Keep pressing SET UP down during step 1 Press the number key 1 for 1 2 for 2 3 for 3 or 4 for 4 to change the remote control code then press ENTER 2 Press O I on the unit to turn off the unit Press gt on the unit for over 5 seconds while the unit is turned off The code currently set appears on the fr
21. BRAND then press ENTER 7 Press AY to select the brand code from the list on page 24 then press ENTER e If the unit is in playback or recording mode you cannot set the brand code 8 Press V to select PROGRAMME then press ENTER 9 Press Y to select one of the channel positions on the satellite receiver then press ENTER e You can select the channel position between 1 to 999 Press AV to select TEST then press ENTER The unit enters the Test mode 1 EXT SELECT INITIAL SET UP gt SAT CONTROL SET BRAND PROGRAMME TEST 1 3 SET UP ENTER P SELECT WITH 4 THEN PRESS ENTER 1 PRESS SET UP TO EXIT EXIT 2 SELECT 1 24 en SAT CONTROL SET 1 1 Check the result of the test If the satellite receiver s channel number has been changed to the same one as you set in step 9 Press lt gt to select YES then press ENTER to finish the Sat Control Set mode If the satellite receiver s channel number has not been changed correctly Press lt to select NO then press ENTER Then perform the procedure again from step 6 BRAND NAME CODE 73 60 61 62 63 92 CANAL SATELLITE CANAL D BOX ECHOSTAR VIA DIGITAL FINLUX FORCE GALAXIS GRUNDIG HIRSCHMANN HUMAX ITT NOKIA JERROLD KATHREIN LUXOR MASCOM MASPRO NOKIA PACE PANASONIC PHILIPS RADIX RFT SABA SAGEM SALORA SAMSUNG SIEMENS SKYMASTER TECHNISAT NOTES
22. SAT appears on the front display panel NOTES e To disengage the Automatic Satellite Programme Recording mode press SATO e f the unit s power is off it is not possible to engage the Automatic Satellite Programme Recording mode e In step 4 if SAT blinks quickly on the front display panel even though your satellite receivers power is off Automatic Satellite Programme Recording will not work properly with that satellite receiver If this is the case perform Manual Timer Programming gt pg 46 to timer record a satellite programme Some satellite receivers output signals even if the power is off Automatic Satellite Programme Recording is not possible with those satellite receivers e SATO blinks on the front display panel while Automatic Satellite Programme Recording is in progress e For timer programming of the satellite receiver refer to the instruction manual of the satellite receiver e Automatic Satellite Programme Recording is not possible if your satellite receiver does not have a timer e Pressing the units button while Automatic Satellite Programme Recording is in progress turns off the unit s power and disengages the Automatic Satellite Programme Recording mode e f there are more than one satellite programmes you wish to record with Automatic Satellite Programme Recording it is not possible to set different recording modes for each programme e Depending on the type of satellite rece
23. system You can enjoy the virtual surround sound with your 2 channel stereo system Press ON SCREEN twice to access the on screen bar 2 Press lt gt to select then press ENTER e Above the selected item 3D ON appears and Simulated Surround Effect is activated e Each time you press ENTER 3D ON appears and disappears alternately TITLE 99 TRACK 99 EACH 0 00 3D ON CINEMA AUTO 1 VIDE o E3 To clear the on screen bar Press ON SCREEN To cancel the simulated surround effect Press ENTER to clear 3D ON from the screen NOTES e Simulated Surround Effect works correctly only when playing back a title recorded in multichannels e Simulated Surround Effect does not affect the DVD VIDEO bitstream signal from the DIGITAL OUT connectors e When Simulated Surround Effect is activated the settings of ANALOG AUDIO OUT and D RANGE CONTROL are disabled pg 67 Adjusting The Picture Quality DVD DVD Audio RAM VIDEO CD You can obtain optimal picture quality by selecting an appropriate picture mode Press ON SCREEN twice to access the on screen bar 2 Press lt gt to select then press ENTER The pop up window appears under the selected item TITLE 99 TRACK 99 EACH 0 00 DVD CINEMA AUTO 1 neg jasc 9 O Press AV to select the desired option then press ENTER NORMAL Normally select this option CINEMA Suitable for a mov
24. 3SAT 9LIVE AB3 ADULT ANIMAL PLANET ARD ARTE MAGYAR ATV BERLIN 1 BBC GROUP BBC1 BBC2 BBC WORLD TV BIO BLOOMBERG BAYERN3 CANAL PLUS PORTUGUSES VALENCIA CANALE5 KETNET CANVAS KANAAL Z CHANNEL4 CHANNEL5 CHILD CINEMA TELECLUB CMT CNN ANDALUCIA CT 1 CT 2 DISCOVERY DENMARK1 DENMARK2 DENMARKA DR TV DR2 DSF DUNA TV ETB1 ETB2 ETV EURO NEWS EURONEWS EUROSPORTS FEMMAN FILM FILMNET France2 France3 France5 GALAVISION HBO HESSENS3 H S EURO INFO KANAL ITALIA1 ITV KBH KANAL KINDER KANAL LA7 LIBERTY TV LOCAL M6 MBR MCM MDR MOVIE MTV MTV1 MTV2 MTV3 NATIONAL G NEWS24 NORD3 N TV NBC SUPER NDR NED1 NED2 NETWORK5 NICKELODEON NOVA NRK NRK2 ODEON ORF1 ORF2 PHOENIX POL SAT PREMIERE PRIMA TV PRO7 RAI2 RAI3 RETE4 TELE21 RTBF1 2 RTL RTL2 RTL4 RTL5 RTL7 RTLK RTP RTV4 SAT1 SBS Service SHOW SOCIEDADE SKY CHANNEL SKY NEWS SPEKTRUM SPORT SUPER RTL STAR TV SVT1 SVT2 NEWS SUEDWEST3 TCC TCM TELE TELE5 TF1 TV DE MADRID TELEMONTECARLO TMF TNT INT TRT INT TSI TSR TSR2 BRTN TV1 TV2 TV2 ZULU TV3 TV3 PLUS TV4 TV5 TV6 TV8 TVE1 TVE2 TV GALICIA TV INDEPENDENT TV NORGE TVN24 TVP1 TVP2 TV POLONIA VIDEO MUSIC VOX VIASAT3 VT4 VTM West3 WORLD YLE1 YLE2 YORIN ZDF ZTV 86 LIST OF TERMS A A B Repeat Playback
25. Discs It is only possible to use discs which conform with DVD RAM standard Version 2 0 or 2 1 e It is impossible to record on DVD RAM discs which do not conform to this standard If you use a disc formatted under a different standard version format it on this unit before use e t may not be possible to record play back edit or dub a DVD RAM disc even if it conforms to the standard if it was recorded or edited on the devices from other manufacturers or on a PC or if it has far too many titles or if there is very little available capacity remaining on the disc e DVD RAM discs recorded on this unit cannot be played back on an incompatible DVD player e is possible to record copy once programmes of digital broadcasts only onto 4 7 9 4 GB DVD RAM discs 2 8 GB DVD RAM discs are not compatible DISC INFORMATION EN 5 DVD R RW Discs It is only possible to use DVD R discs which conform with DVD R standard Version 2 0 When DVD R RW disc Video mode is finalised lt pg 75 it can be played back on a standard DVD player as a DVD VIDEO disc When a DVD RW disc VR mode is finalised gt pg 75 it can be played back on a standard DVD player compatible with the VR mode of DVD RW discs Before finalising it is possible to record on unrecorded areas of the disc edit the disc title and programme titles and delete programmes e t is impossible to record or edit DVD R RW discs recorded on other devices even
26. ENTER 7 Press SET UP twice to complete the setting NOTE If you forget your password enter 8888 in step 6 To Temporarily Release Parental Lock When you set the Parental Lock level strictly some discs may not be played back at all When you insert such a disc and try to play it back the confirmation screen appears on the TV screen asking you whether you want Parental Lock to be temporarily released or not Load a disc e f the disc is rated higher than the selected level the confirmation screen appears 2 Press lt I gt to select YES then press ENTER e f you select you cannot play back that disc 3 Press the number keys to enter the same password as in step 6 of To Set Parental Lock For The First Time then press ENTER e When you enter the correct password the Parental Lock is released and the unit starts playback e f you enter a wrong password ENTRY ERROR appears on the TV screen Enter the correct password e f you have successively entered wrong password three times ENTRY ERROR CAN NOT CHANGE PASSWORD appears on the TV screen In such a case press ENTER The disc will stop Then play back the disc again and try the procedure again from step 1 NOTE If you forget your password enter 8888 in step 3 Basic Recording DVD DVD amp Audio RAM VIDEOR SVCD CD e Turn on the unit e Turn on the TV and select the AV mode e Slide the TV CABLE SAT DVD switch
27. Example If you programmed to timer record for 60 minutes in SP mode on a 120 minute disc the disc remaining time would be 30 minutes in XP mode 60 minutes in SP mode 120 minutes in LP mode 180 minutes in EP mode and 240 minutes in FR480 mode Timer recording will not complete beyond these remaining times e The maximum recording time of FR JUST mode is the same as the recording time of 480 mode When timer programming a long programme in FR JUST mode on a disc whose remaining time is short it is recommended checking the disc remaining time in 480 mode to see if the remaining time is enough for the programme e Even if more than one programme are timer programmed in FR JUST mode only the first one is recorded e In order to ensure that the recording fits on the disc this feature may leave a slight non recorded section at the end of the disc e There may be some noise and sound disturbance at the point on the disc where the unit switches the mode BASIC OPERATIONS ON DVD DECK 37 Receiving Stereo And Bilingual Programmes Your unit is equipped with a Sound Multiplex decoder A2 and a Digital stereo sound decoder NICAM making reception of stereo and bilingual broadcasts possible When the channel is changed the type of broadcast being received will be displayed on the TV screen for a few seconds Type of Broadcast Being Received A2 Stereo A2 Bilingual On screen Display Regular Monaural NICAM Stereo N
28. IN OUT 4 Press AV to select ON e SCREEN LANGUAGE then press ENTER ENGLISH 5 Press AV to select your desired language then press Omer mesa ENTER Press SET UP to complete the setting HIER Menu Audio Subtitle Language Set DVD deck only ENSIS Some DVD discs contain the DVD menu display audio and subtitles in multiple languages With these discs you can set the default language as you like The procedure shows how to set MENU LANGUAGE as an example Press SET UP to access the Main Menu screen 2 Press lt gt to select DVD VIDEO SET UP then press V 3 Press lt gt to Select DVD VIDEO SET UP UT ST E NN DT PERS EU d SET UP LANGUAGE SET then press Ws LANGUAGE SET AUDIO OUTPUT PARENTAL LOCK DISC SET UP Press AV to select MENU LANGUAGE then press ENTER SUBTITLE ENGLISH 5 Press AV to select your desired language then press ENTER e See Language Code List lt pg 82 Press SET UP to complete the setting NOTE When the selected language is not available on the disc the disc s default menu language is played back 22 en INITIAL SETTINGS Press SET UP to access the Main Menu screen Monitor Set e You cannot set the monitor type during recording or playback MUSS 2 Press lt gt to select FUNCTION SET UP then press V You can select the monitor type depending on the TV used when i P
29. Library Database Navigation screen appears 2 Press AV lt D to select ORIGINAL then press ENTER Press AV lt I gt to select the index small pictures of the desired title then press ENTER e When you want the plural titles to be played back continuously press MEMO after selecting the desired title The numbers of the playback order appear on the index You can select up to 8 titles e When you want to correct the order move the arrow to the desired index and press MEMO The number disappears and the unit re numbers the other programmes automatically e When you want to cancel the order press CLEAR W Press lt gt to select BEGINNING then press ENTER e To repeat playback of a selected title press lt gt to select REPEAT then press ENTER e To resume playback from the point where playback was previously Cd NAVIGATION gt ORIGINAL 0026 FISH WORLD E3143 MIN R 3 O 25 12 03 THU 10 00 10 15 PR 3 FROG WORLD HOBBY EP SELECT WITH THEN PRESS ENTER PRESS NAVIGATION TO EXIT NAVIGATION ENTER r Ssugcr 24 NAVIGATION gt ORIGINAL 25 12 03 THU SP 10 00 10 15 PR 3210 FROG WORLD HOBBY SELECT HOW TO PLAY BACK PRESS NAVIGATION TO EXIT BEGINNING f Resume REPEAT SELECT WITH THEN PRESS ENTER NAVIGATION ENTER ue stopped press lt gt to select RUNE RESUME t
30. NAVIGATION EN 53 Add scenes Pertorm steps 1 3 in Edit Scenes gt pg 53 before continuing 2 Press AV lt D to select SELECT TITLE then press ENTER 3 Perform steps 4 10 in Create Play List pg 53 Move Scenes Perform steps 1 3 of Edit Scenes gt pg 53 before continuing 2 Press AV lt I gt to select MOVE then press ENTER Press AV to select a scene to move then press ENTER 4 Press AV to select another scene to which the scene is to be moved then press ENTER e To cancel the move press AV lt P to select RETRY then press ENTER 5 Perform steps 8 10 in Create Play List gt pg 53 Delete Scenes Pertorm steps 1 4 of Create Play List pg 53 before continuing 2 Press AV lt D to select DELETE then press ENTER 3 Press AV to select a scene to delete then press ENTER Perform steps 8 10 in Create Play List gt pg 53 Play Back Play List Press NAVIGATION The Library Database Navigation screen appears 2 Press AV lt D to select PLAY LIST then press ENTER Press AV lt I gt to select the ul NAVIGATION gt PLAY LIST E index small pictures of the 0026 FISH WORLD 1 M143 amp 026 CREATED 26 12 03 FRI desired play list then press TEDDY BEAR 2 2 ENTER SELECT WITH 2 SES su ams THEN PRESS ENTER 1 you want the plural play lists PRESS NAVIGATION 004 005
31. Press SET UP to close the Confirmation screen When Receiving A Scrambled Broadcast Set L 2 SELECT to DECODER r pg 61 2 Perform steps 1 5 of Manual Channel Set c pg 71 Press AV lt D to select the channel position broadcasting scrambled programmes then press ENTER The Confirmation screen appears Press AV to select DECODER then press ENTER 5 Press AV to set DECODER to ON then press ENTER 6 Press RETURN to return to the Manual Channel Set screen e Repeat steps 3 5 as necessary 7 Press SET UP to close the Confirmation screen INFORMATION If you live in Eastern Europe SYSTEM setting appears instead of DECODER setting on the Manual Channel Set screen When you can see the picture but can hear no audio select appropriate TV system D K or B G Normally TV programmes are broadcast as follows For Eastern Europe D K For Western Europe B G Select a country in Eastern Europe in step 5 of Auto hannel Set gt pg 70 Press AV to select TV SYSTEM in step 7 of Manual hannel Set gt pg 71 3 Press AV to select appropriate TV System D K or B G Set Stations Set station names that are registered in your unit Perform steps 1 5 of Manual Channel Set pg 71 2 Press AV lt D to select the channel you want to modify then press ENTER The Confirmation screen appears 3 Press AV to
32. The L 2 IN DECODER connector can be used as an input connector for an external decoder descrambler Simply connect a decoder and you can enjoy a variety of programming that is available through scrambled channels Decoder TV aerial cable RF cable provided Set 1 2 SELECT to DECODER pg 61 2 Connect your unit s L 2 IN DECODER connector to the decoder s 21 pin SCART connector using a 21 pin SCART cable 3 Perform the procedure as described in When Receiving A Scrambled Broadcast pg 72 Mode Set e Turn on the unit e Turn on the TV and select the AV mode e Slide the TV CABLE SAT DVD switch to DVD CABLE SAT LT TV DVD mat ENTER lt gt SET UP Various modes of this unit are categorized into menus nested in 2 levels shown in the following table To change the settings of these modes find the desired mode in the menu for details on each menu see pages 67 through 68 then follow the procedure below DVD VIDEO SET UP LANGUAGE SET c pg 21 AUDIO OUTPUT c po 67 PARENTAL LOCK pg 34 DISC PLAY SET UP gt pg 68 HDD SET UP c pg 68 DVD SET UP pg 68 DISC SET UP c pg 74 75 REC PLAY SET UP c pg 68 DISPLAY SET gt pg 69 VIDEO IN OUT gt pg 22 61 TUNER SET r p
33. Time Elapsed Time Display c pg 28 36 Multi Display Displays clock received channel elapsed time and remaining time Also displays status of the unit NO DISC OPEN CLOSE READING Remote Control CABLE SAT 5 D STANDBY ON close TVAV TVICBUSAT oio 7 f 5 VIDEO NEL 0 LIVE DUBBING EDIT PROGRAMME 0 CO GO CACY TV OX L 8 SS OTS Gl e 15 PROGRESSIVE AUDIO SUBTITLE ANGLE SCAN Sut mm Open Close Button 4 amp gt 8 TV AV VIDEO Button gt pg 36 39 HDD Button c pg 38 Q Number Keys gt pg 23 35 38 Q Auxiliary Button AUX gt pg 46 70 Cancel Button X CANCEL c pg 44 Live Button LIVE c pg 42 Dubbing Button DUBBING c pg 56 TV Muting Button TV dX c pg 63 Top Menu Button TOP MENU c pg 26 AV D Buttons c pg 21 Menu Button MENU c pg 26 Reverse Skip Button ma a c pg 26 42 43 Previous Button PREVIOUS c pg 29 B Reverse Search Button lt c pg 26 42 Reverse Slow Button SLOW c pg 27 D Record Button 6 gt pg 35 38 Jump Button JUMP c pg 43 Recording Mode Button REC MODE c pg 35 38 Display Button DISPLAY c pg 28 36 D Automatic Satellite Programme Recording Button SATO c pg 48 INDEX 13 VPS PDC Recording Button VPS PDC gt pg 45 Audio Butt
34. becomes e Select NONE to cancel the restriction Press the number keys to enter your desired four digit number then press ENTER e f you made a mistake enter a correct number again 7 Press AV to select COUNTRY CODE then press ENTER 8 Press V to select your country code then press ENTER e f you do not need to change your country code jump to 10 See Country Area Code List for Parental Lock gt pg 83 SELECT WITH THEN PRESS ENTER PRESS SET UP TO EXIT EXT SELECT 9 Press the number keys to enter the same password as in step 6 above then press ENTER 10 Press SET UP to complete the setting NOTE Remember your password or make a note of it To Change The Settings You can change the Parental Lock settings later Perform steps 1 to 3 of To Set Parental Lock For The First Time to access the PARENTAL LOCK screen before continuing To change the level 2 Press AV to select PARENTAL LEVEL then press ENTER 3 Press AV to select the desired level then press ENTER To change the country code 4 Press AV to select COUNTRY CODE then press ENTER 5 Press AV to select your country code then press ENTER See Country Area Code List for Parental Lock 83 Press the number keys to enter the same password as in step 6 of To Set Parental Lock For The First Time then press
35. beginning of the recorded programme 3 Set the input mode to DV INPUT on the DV equipment e f you select an input mode other than DV INPUT unwanted pictures may be recorded at the beginning of the recorded programme 4 Perform step 8 to 9 To skip unwanted part of the source picture Press ENTER to stop both equipment then press lt gt to select im 1 Locate the point where you want to restart dubbing by pressing P gt or 44 then press Press lt gt to select Ei then press ENTER to restart dubbing Edit From A Camcorder You can use a camcorder as the source player and your unit as the recording deck 1 If the camcorder has no S VIDEO output connector AUDIO VIDEO input Lu 2 j B uel Recorder Audio video cable not provided AUDIO VIDEO OUT 2 If the camcorder has an S VIDEO output connector S VIDEO input AUDIO input JVC i g icd Recorder S video cable not provided S VIDEO OUT Audio cable not provided AUDIO OUT EDITING Ey 59 e Slide the TV CABLE SAT DVD switch to DVD 1 Make connections 1
36. cannot be performed while playback is stopped BASIC OPERATIONS ON DVD DECK 25 To play back an MP3 JPEG disc see Playback With MP3 JPEG Navigation lt pg 55 Load a disc e For details refer to Placing A Disc pg 8 e Pressing also closes the disc tray e Playback begins automatically if an auto playback DVD disc is loaded 2 Press DVD so that the DVD lamp lights up on the unit Press gt to start playback e f you load a DVD disc whose region code does not match the unit REGION CODE ERROR appears on the TV screen For details refer to Region Number lt pg 6 e NOT PLAY BACK DISC UNDER CURRENT SETTING appears on the TV screen refer to Parental Lock pg 34 e With Video CD SVCD discs with PBC control or some DVD discs the menu display may appear on the TV screen after starting playback In this case select an item which you want to play back from the menu Otherwise the playback cannot go forward Refer to Playback Control PBC Function pg 29 or Locating A Desired Scene Using The DVD Menu c pg 26 e The Library Database Navigation also enables you to search and select the desired titles pg 50 Press to pause playback To resume normal playback press 5 Press to stop playback e When a recordable disc is played playback stops and a programme received with the unit s tuner resumes on the TV screen e
37. connector Press SET UP to access the Main Menu screen 2 Press lt to select FUNCTION SET then press V Press lt gt to select VIDEO IN OUT then press V Press Y to select L 1 OUTPUT or L 1 INPUT then press ENTER FUNCTION SET UP REC PLAY SET DISPLAY SET VIDEO IN OUT x SETUP amp ENTER SELECT WITH THEN PRESS ENTER mene PRESS SET UP TO EXIT 5 Press AV to select the appropriate setting then press ENTER FUNCTION SET UP REC PLAY SET DISPLAY SET VIDEO IN OUT VIDEO 6 Press SET UP to complete the setting m The boldface settings below m NEN SELECT WITH THEN PRESS ENTER lo indicate the settings at your ERU purchase B L 1 OUTPUT SCART VIDEO SCART S VIDEO SCART RGB COMPONENT SCART VIDEO connected appliance s input is compatible only with regular video signals set to SCART VIDEO SCART S VIDEO If a connected appliance s input is compatible with Y C signals set to SCART S VIDEO You can obtain high quality picture For connection be sure to use a 21 pin SCART cable that is compatible with the Y C signal SCART RGB If a connected appliance s input is compatible with RGB signals set to SCART RGB You can obtain a high quality RGB picture
38. currently viewed one by jumping a selected time interval during playback or Live Memory Playback or recording or Live Memory Recording For details refer to Jump Search gt pg 43 DISPLAY SET SUPERIMPOSE OFF AUTO When this function is set to AUTO various operational indicators appear on the TV screen Messages appear in the selected language gt pg 21 OFF To turn off superimposed indications AUTO To superimpose operational indications for approximately five seconds just after the corresponding operation NOTES e Even when SUPERIMPOSE is set to OFF you can display the various operational indicators by pressing ON SCREEN To clear the operational indicators press ON SCREEN again e When you use this unit as the source player for editing be sure to set SUPERIMPOSE to OFF before starting lt pg 60 e When you select AUTO during playback the operation mode indicators may be disturbed depending on the type of disc being used BLUE BACK ON OFF When this function is set to ON the TV screen becomes all blue when receiving a channel not in use NOTE When you want to receive an unstable channel with poor signals set this function to OFF i DIMMER BRIGHT DIMMED1 DIMMED OFF You can change the brightness of the front display panel BRIGHT Normally select this DIMMED1 DIMMED2 To change the brightness level Blue lamp on the front display pa
39. l advances to the next page Pressing PREVIOUS lt lt returns to the previous page e You can return to the menu by pressing RETURN e The method of the operation is different depending on the disc NOTES e f you want to playback a PBC compatible Video CD SVCD disc without activating the PBC function start playback in stop mode by using the number keys instead of the button to choose the track then press ENTER To activate the PBC function when a PBC compatible Video CD SVCD disc is being played back without the PBC function press TOP MENU or press W then press To Move Back The Playback Position Slightly One Touch Replay Function DVD DVD Audio Ea Ed E E23 E3 o C3 ES You can move back the playback position slightly 1 Press e Each press skips back for approximately 7 seconds and resumes playback e Pressing while paused skips back for approximately 7 seconds and resumes pause e n m 30 BASIC OPERATIONS ON DVD DECK f Using The On screen Bar DVD DVD Audio Ed EZ E2 Es E EZ The on screen bar allows you to control various playback functions Some of the functions operated on Navigation Menu can be controlled on the On screen bar Be sure to clear Library Database Navigation screen by pressing NAVIGATION ATTENTION The on screen bar can also be used for the HDD deck TV DVD lt o obe _ CABLE SAT
40. locate the beginning of the current item press 1 once High Speed Search DVD DVD Audio E E23 E3 55 During playback press for forward high speed search or 4 4 for reverse high speed search e Each press of the button increases the search speed for each direction To resume normal playback press Still Picture Frame By Frame Playback EA Ea E E3 Ed L3 53 1 Press I to pause during playback 2 Press SLOW 44 SLOW gt gt to activate frame by frame playback e Each press of SLOW 4 4 or SLOW gt gt advances reverses the still picture frame by frame e Frame by frame playback for reverse direction cannot be performed with Video CD SVCD discs To resume normal playback press P Slow Motion DVD DVD Audio E3 ie ES 1 Press to pause during playback 2 Press SLOW lt or SLOW gt gt for more seconds e Each press of SLOW 4 4 SLOW gt gt increases the slow motion speed for each direction from 1 16 to 1 2 times the normal speed e Slow motion for reverse direction cannot be performed with Video CD SVCD discs Skip Search DVD DVD MUN Audio RAM VIDEOR CD During playback press 4 e Each press initiates an approximately 30 second period of fast motion playback Normal playback resumes automatically Resume Function Eo EM EJ E3 E3 It is possible to memorize the position
41. playback Each title elapsed time Current title elapsed time Disc remaining time back to the beginning only discs before finalising In stop mode or during playback e In FR mode it is possible to set recording time in detail using lt gt lt gt pg 37 e t is not possible to switch the recording mode during playback or while recording B DVD VIDEO Video CD SVCD Audio CD During playback Current track elapsed time Current track remaining time Total elapsed time Total remaining time back to the beginning In stop mode 0 00 Playback time of track 1 0 00 Total length of a disc gt back to the beginning NOTE When a PBC compatible Video CD SVCD disc is loaded deactivate the PBC function pg 29 Angle Selection You can enjoy a variety of scene angles if a DVD VIDEO disc contains multi angle parts where the same scene was shot from different angles If the disc contains multi angle parts appears on the TV screen at the beginning of the multi angle part Press ANGLE during playback The angle selection display appears on the TV screen 2 Press ANGLE or lt gt to select your desired angle e Each time you press ANGLE or lt the angle changes e When Q appears on the TV screen the current scene is not recorded from multiple angles In addition some discs prohibit angle selection e To clear the angle selection dis
42. press Still Picture Frame By Frame Playback 1 Press to pause during playback 2 Press SLOW lt lt or SLOW gt gt to activate frame by frame playback e Each press of SLOW 4 4 or SLOW BB advances reverses the still picture frame by frame To resume normal playback press Slow Motion 1 Press to pause during playback 2 Press SLOW lt lt or SLOW BP for 2 or more seconds e Each press of SLOW 4 4 SLOW gt gt increases the slow motion speed for each direction from 1 16 to 1 2 times the normal speed Skip Search During playback press 4 e Each press initiates an approximately 30 second period of fast motion playback Normal playback resumes automatically Live Memory Playback e Turn on the unit e Turn on the TV and select the AV mode e Slide the TV CABLE SAT DVD switch to DVD e Press HDD so that the HDD lamp lights up on the unit This unit records pictures onto the hard disc instead of video tapes then plays back the pictures recorded on the disc This makes it possible to achieve high speed writing and read out that has not been possible with conventional VCRs enabling recording and playback simultaneously High speed spin Recording High speed writing C Playback High speed read out Image figure of the hard disc It is called Live Memory Playback to start playback of the programme being recorded with a time la
43. programme using the SHOWVIEW system the unit will record a TV programme of a different station When programming the timer using the SHOWVIEW system be sure to check the desired channel is selected correctly pg 44 SHOWVIEW Timer Programming e Your unit memorizes all detected stations even if reception of some of them is poor You can delete those stations with an unacceptable picture pg 72 Delete A Channel INFORMATION Language for the on screen display Auto Set Up also selects the language automatically for the on screen display depending on the Country setting you have made in step 2 on page 18 unless you have selected BELGIUM or SUISSE as shown below SUOMI gt SUOMI ITALIA ITALIANO PORTUGAL ENGLISH MAGYARORSZ G ENGLISH DEUTSCHLAND DEUTSCH ESPANA CASTELLANO POLSKA ENGLISH NEDERLAND NEDERLANDS NORGE NORSK GREECE ENGLISH VERIGE VENSKA B OTHER WESTERN ENGLISH DANMARK DANSK OTHER EASTERN ENGLISH CESKA REPUBLIKA ENGLISH If you want to change the language setting manually see On screen Language Set on page 21 Just Clock Your unit is equipped with the Just Clock function which provides accurate time keeping through automatic adjustments at regular intervals by reading data from a PDC signal If you want to take advantage of this function simply set it to ON pg 73 T V Link Functions When you connect the unit
44. recording deck refer to its instruction manual 1 When using your unit as the source player TV receiver Player Your unit 1 21 pin SCART cable provided 21 pin SCART cable not provided 1 Recorder n When using your unit as the recording deck TV receiver Recorder Your unit m 21 pin SCART cable provided 21 pin SCART cable not provided Another recorder Player e Slide the TV CABLE SAT DVD switch to DVD Connect another recorder s 21 pin SCART connector to the unit s 21 pin SCART connector as illustrated 1 When using your unit as the source player connect its L 1 IN OUT connector to the recording deck When using your unit as the recording deck connect its L 2 IN DECODER connector to the source player e f another recorder is compatible with the Y C signal when using your unit as the source player set L 1 OUTPUT to SCART S VIDEO pg 61 when using your unit as the recording deck set L 2 SELECT to S VIDEO gt pg 61 2 When using this unit as the recording deck press HDD or DVD to select the recording deck 3 When using this unit as the recording deck press PR to select L 2 e Set L 2 SELECT to VID
45. seconds ACCESSORIES Provided accessories HF cable 21 pin SCART cable Satellite Controller Infrared remote control unit battery x 2 E amp O E Design and specifications subject to change without notice ATTENTION This unit contains microcomputers External electronic noise or interference could cause malfunctioning In such cases switch the unit off and unplug the mains power cord Then plug it in again and turn the unit on Take out the disc After checking the disc operate the unit as usual 82 APPENDIX Language Code List Abrasion N RO Rum Koran KOR Sw _ o Wem Arm _ pm eum S SR Sm _ ee E me _ a fresan M a _ Malay AV Gu Mam C 0m Uh E mee Q gt lt A 2 c APPENDIX 83 Country Area Code List for Parental Lock CO GS AG Sandwich Islands Islands AW Mm Deme Mi Ar mdweis Bb BE t few Burkina Faso British Indian Ocean Territory Western Sahara Iraq LONE Ba fema M _ CN Lu KE e LN BH ES 2 LEN LN LN BM LEN BN _ Fede
46. seconds and resumes playback Pressing repeatedly skips back for approximately 7 seconds continuously as many times as pressed It is useful when watching sports programmes etc LIVE CHECK Pressing once displays the picture currently being recorded and the one being played back simultaneously Pressing successively clears the Live Check window and displays only the picture currently being played back You can check for example if the programme you are recording has already finished To Play Back The Previous Part Of The Channel Currently Recording or Watching You can play back the previous part of the channel you are recording or watching temporarily recorded on the background from the desired point gt pg 41 Temporary recording for Live Memory 1 Press or 444 to locate the point to start playback from e Each press of 4 4 increases the reverse search speed 2 Press to start Live Memory Playback Press to stop Live Memory Playback e The on air screen resumes NOTES You can use various playback features during Live Memory Playback lt pg 40 e f you have started actual recording by pressing 6 pressing in step 3 only resumes the on air screen To stop actual recording press again To Record From The Previous Part Of The Channel Currently Watching Live Memory Recording You can start recording from the previous part of the channel you ar
47. select ID then press ENTER 4 Move the arrow to the left ID selection column Registered station names ID lt pg 85 appear as you press AV 5 Press ENTER to select the desired ID then press ENTER again to select OK 6 Press RETURN to return to the Manual Channel Set screen e Repeat steps 2 5 as necessary 7 Press SET UP to close the Confirmation screen Set Stations B Set station names other than the ones registered in your unit Perform steps 1 5 of Manual Channel Set pg 71 2 Press AV lt D to select the channel you want to modify then press ENTER The Confirmation screen appears 3 Press AV to select ID then press ENTER Press AV lt gt to select the desired characters A Z 0 9 space then press ENTER e Enter the remaining characters the same way maximum of 4 5 After entering all characters press AV lt gt to select OK then press ENTER 6 Press RETURN to return to the Manual Channel Set screen e Repeat steps 2 5 as necessary 7 Press SET UP to close the Confirmation screen NOTE The characters available for the station name ID are A Z 0 9 space maximum of 4 Fine Tuning Channels Already Stored Perform steps 1 5 of Manual Channel Set pg 71 2 Press AV lt P to select the channel you want to fine tune then press ENTER The Confirmation screen appears Press AV to select FIN
48. set properly e Turn on the unit e Turn on the TV and select the AV mode e Slide the TV CABLE SAT DVD switch to DVD TV DVD e olo CABLE SAT AUX PROGRAMME ENTER AVID Load a recordable disc if recording to DVD 2 Press PROGRAMME to access the programme top screen Press AV lt D to select CALENDAR then press ENTER e When PROGRAMME FULL DELETE UNWANTED TIMER PROGRAMMES appears on the TV screen you need to cancel some of the reserved programmes pg 47 Press AV 4 gt to select the desired date then press ENTER 5 Press AV to select RECORD TO then press ENTER Press AV to select the desired recording deck then press ENTER PROGRAMME gt CALENDAR PR 2 3 14 01 04 WED 22 30 23 00 BBCI MISC XP 425 RECORD THEN PRESS ENTER 22 30 PRESS PROGRAMME STOP 23 00 TO EXIT 0 SAT TV PROG BBC1 x PR BRAMIE ENTER more EXIT lt SELECT 6 Press AV to select START then press ENTER Press AV to set the desired start time then press ENTER e Each press of AV advances goes back the start time in 1 min increments e To advance go back the start time in 30 min increments press and hold AV 7 Press AV to select STOP then press ENTER Press AV to set the desired stop time then press ENTER e Each press of AV advances goe
49. that is compatible with the Y C signal DECODER To use a decoder connected to the L 2 IN DECODER connector SETUP ENTER lt at SELECT WITH 4 THEN PRE w EXIT SELECT RESS SET UP TO EXIT 62 en EDITING NOTES e f you have a satellite receiver or a decoder connected to the L 2 IN DECODER connector be sure to set L 2 SELECT back to appropriate mode after editing e f you are not connecting a satellite receiver or a decoder to the L 2 IN DECODER connector leave L 2 SELECT set to VIDEO e When L 2 SELECT is set to SAT VIDEO and SAT S VIDEO SAT appears on the TV screen or front display panel instead of L 2 e f L 1 OUTPUT is set to SCART S VIDEO it is not possible to set L 2 SELECT to DECODER or SAT VIDEO e f L 1 OUTPUT is set to SCART RGB it is not possible to set L 2 SELECT to DECODER or SAT S VIDEO e If L 1 OUTPUT is set to COMPONENT and L 2 SELECT to SAT VIDEO SAT S VIDEO or DECODER be sure to connect the L 1 IN OUT connector with a TV F 1 Input Setting Set F 1 INPUT to the appropriate mode depending on the connector VIDEO or S VIDEO being used on the front panel Perform steps 1 and 2 of L 1 Output And L 1 Input Setting c 61 2 Press AV to select F 1 INPUT then press ENTER Press AV to select the appropriate setting then pr
50. the selected file Group name Selected file FASE SE NAVIGATION EN 55 Locating The Desired Group And Tracks Load a disc 2 Press NAVIGATION Press AV lt D to select ORIGINAL then press ENTER Press Y to select the desired group then press ENTER A list of files in the selected group z appears ROOT CLASSIC CLUB DANCE EUROPE FOREIGN GROUP FOREIGN ROCK NAVIGATION ORIGINAL GROUP 001 100 IT S SHOWTIME B z 5 Press AV to select the desired item then press ENTER The unit starts playback from the selected 5 item EUR a NAVIGATION ORIGINAL GROUP 001 100 IT S SHOWTIME B z 2 001 IT S SHOWTIME B z CLASSIC 002 FLOWER IN THE WORLD SMAP M e The unit stops when all items in CLUB DANGE the selected group are played EUROPE back FOREIGN GROUP 006 REASON ASAMI i FOREIGN ROCK 007 DIE ANOTHER DAY JAMES BOND lt 7 NOTES e f you press SELECT gt instead of ENTER in step 4 the unit starts playback from the first file of the group e JPEG files are played back as a slide show at the set intervals lt pg 33 e file name includes any 2 byte character the unit may not show the file name correctly e The order of the groups and items shown in steps 4 and 5 may differ from the order shown on your PC 56 en EDITING Dubbing e Turn on the unit e Turn on the TV and select t
51. to DVD ATTENTION It is not possible to record programmes on a DVD R disc which has already been finalised gt DVD JVC atmo 0 B W B c 0P P at B CABLE SAT TV DVD 0 9 PR ENTER REC MODE Load a recordable disc e For details refer to Placing A Disc pg 8 2 Press DVD so that the DVD lamp lights up on the unit Press PR or the number keys to select the channel you wish to record 4 Press REC MODE repeatedly to select the recording mode then press ENTER e Each time you press REC MODE the recording mode changes as follows XP gt SP gt LP EP gt FR60 FR360 420 FR480 Back to the beginning The value is selectable from 1 to 6 hours in 5 min increment by pressing lt gt repeatedly after selecting FR60 FR360 To change the value in 30 min increments press and hold lt 7 P e For details on the recording mode see the right column 5 Press on the unit to start recording Or press and hold and press on the remote control Press 0 and M to pause recording e To resume recording press P 7 Press twice to stop recording e t takes about 10 seconds to end the writing session when you stop recording BASIC
52. to your TV via a fully wired 21 pin SCART cable pg 17 the following functions are available You can use these functions only with a TV offering T V Link etc For details refer to the instruction manual of your TV Compatible with TVs offering T V Link EasyLink Megalogic SMARTLINK Q Link or DATA LOGIC via a fully wired 21 pin SCART cable The degree of compatibility and available functions may differ by system TV Auto Power On The TV will turn on and be set to its AV mode automatically whenever you start playback For details refer to the instruction manual of your TV Unit Auto Standby You can use your TV s remote control to turn off the unit For details refer to the instruction manual of your TV Direct Rec You can easily start recording the programme that you are watching on your TV When you use this function set DIRECT REC to ON gt pg 68 INITIAL SETTINGS 21 On screen Language Set This unit offers you the choice to view on screen messages in 10 different languages Press SET UP to access the Main Menu screen Language e Turn on the unit e Turn on the TV and select the AV mode e Slide the TV CABLE SAT DVD switch to DVD 2 Press 41 gt to select FUNCTION SET UP then press V 3 Press lt gt to select DISPLAY DVD VIDEO SET UP HDD DVD SET UP INITIAL SET UP CABLE SAT SET then press V REC PLAY SET UP EEEE VIDEO
53. works on DVD VIDEO VCD SVCD and already finalised DVD R DVD RW video mode discs For other types of discs the function under ON setting will be applied even if RESUME is set to DISC RESUME pg 68 If you stop the playback of a disc for which a resume point has already been memorized the memory will be updated with the new resume point e After the unit has memorized the resume points for 30 discs remembering a new resume point will cause the unit to delete the oldest memorized point Stopping playback of a disc for which a resume point is already stored may change the order in which the points are stored This may potentially change the order in which points are deleted When the unit memorizes a resume point for a disc it also remembers audio language subtitle and angle settings e This function may not work for some Video CD SVCDs e When RESUME is changed to ON or OFF pg 68 resume points of the discs memorized with RESUME set to DISC RESUME will be cleared e Resume points are memorized for each side of a double sided disc Marking Positions To Play Back Again Later DVD DVD Audio ka Ed E E3 ER It is possible to mark positions up to 999 points where you want to play back once again later and start playback from a marked position Marking onto DVD RAM RW R discs when recording is helpful to locate a start point when you play back the discs later T
54. 9 When you can t switch the audio channel of a bilingual programme When the unit is connected with a digital audio device using an optional optical cable and DIGITAL AUDIO OUT is set to DOLBY DIGITAL PCM it is not possible to switch the audio channel of a bilingual programme recorded on a DVD RAM or DVD RW VR mode disc gt pg 66 In this case perform the following steps using the remote control to switch DIGITAL AUDIO OUT from DOLBY DIGITAL PCM to PCM ONLY Press SET UP to access the Main Menu screen Press lt gt to select DVD VIDEO SET UP then press V Press lt gt to select AUDIO OUTPUT then press V Press AV to select DIGITAL AUDIO OUT then press NTER Press AV to select PCM ONLY then press ENTER pg 67 Press SET UP to complete the setting Press AUDIO to select the desired audio channel Playback Control PBC Function Ed E Some Video CD SVCD discs support the PBC function PBC is abbreviation of Play Back Control A Video CD SVCD disc recorded with PBC has its own menus such as a list of the songs on the disc You can locate a specific scene by using the menu Press in stop mode The PBC menu appears 2 Press the number keys to enter the number of the desired scene The unit starts playback of the selected item e PBC appears on the front display panel e When NEXT or PREVIOUS appears on the TV screen Pressing NEXT gt
55. AND INVISIBLE LASER RADIATION WHEN OPEN AVOID EXPOSURE TO BEAM DO NOT STARE INTO BEAM OR VIEW DIRECTLY WITH OPTICAL INSTRUMENTS ADVARSEL SYNLIG OG USYNLIG LASERSTRALING VED ABNING UNDGA UDSAETTELSE FOR STRALING SE IKKE IND STRALEN HELLER IKKE MED OPTISKE INSTRUMENTER ADVARSEL SYNLIG OG USYNLIG LASERSTRALING NAR DEKSEL APNES UNDGA EKSPONERING FOR STRALEN STIRR IKKE INN STRALEN ELLER SE DIREKTE MED OPTISKE INSTRUMENTER VARO AVATTAESSA OLET ALTTIINA N KYV JA N KYM T N LASERS TEILYLLE L TUIJOTA S TEESEEN L K KATSO SIT OPTISEN LAITTEEN L PI VARNING SYNLIG OCH OSYNLIG LASERSTR LNING N R DENNA DEL R PPNAD STR LEN R FARLIG STIRRA EJ IN STRALEN OCH BETRAKTA EJ STRALEN MED OPTISKA INSTRUMENT For Italy It is declared that this product brand JVC conforms to the Ministry Decree n 548 of 28 Aug 95 published in the Official Gazette of the Italian Republic n 301 of 28 Dec 95 The STANDBY ON button does not completely shut off mains power from the unit but switches operating current on and off b shows electrical power standby and 1 shows When the equipment is installed in a cabinet or a shelf make sure that it has sufficient space on all sides to allow for ventilation 10 cm or more on both sides on top and at the rear When discarding batteries environmental problems must be considered and the local rules or laws governing the disposal of these batteries must be f
56. Clock Set when the unit is turned on If you have moved to a different area perform each setting as required e Tuner setting gt pg 70 e Clock setting F pg 73 If a new station starts broadcasting in your area perform tuner setting gt pg 70 NOTES e In areas where no TV station transmits PDC Programme Delivery Control signal the unit can perform neither Auto Clock Set nor Auto Guide Program Number Set e f there is a power cut or if you press O I or SET UP while Auto Set Up is in progress Auto Set Up will be interrupted be sure to turn off the unit power once and try again from step 1 e Auto Clock Set may not function properly depending on the reception condition e f no sound accompanies the picture or the audio sounds unnatural on some channels that have been stored by Auto Set Up the TV system setting for those channels may be incorrect Select the appropriate TV system for those channels pg 72 INFORMATION After Auto Set Up is completed perform Monitor Set on page 22 Preset Download Auto Channel Set by Downloading from TV Auto Clock Set Auto Guide Program Number Set ATTENTION You can use this function only with a TV offering T V Link Be sure to use a fully wired 21 pin SCART cable Compatible with TVs offering T V Link EasyLink Megalogic SMARTLINK Q Link or DATA LOGIC via a fully wired 21 pin SCART cable The degree of compatibility and availabl
57. DABLE DISC e When a playback only disc or a finalised disc is loaded 6 has been pressed gt pg 5 80 En TROUBLESHOOTING SHOWVIEW NO ERROR PRESS STOP AGAIN TO STOP RECORDING CONFIRM SHOWVIEW NO THEN RETRY e An invalid SHOWVIEW number has been input gt pg 44 e During Live Memory playback W has been pressed gt pg 42 TIMER RECORDING COMPLETED GUIDE PROGRAM IS NOT SET SET GUIDE PROGRAM THEN RETRY e Timer recording has finished during Live Memory playback e To set the timer programme using the SHOWVIEW system the PLAYBACK WILL STOP Guide Program number must be set in advance gt pg 70 THEN TIMER RECORDING WILL START CAN SHOWVIEW TIMER PROGRAMMING DURING e Timer recording finished during Live Memory playback then the TIMER RECORDING OR INSTANT TIMER RECORDING next timer recording is about to begin while playback continues COPY PROHIBITED CAN NOT RECORD e Appears when you tried to input a SHOWVIEW number during timer recording or instant timer recording REGION CODE ERROR e An attempt has been made to record copy protected contents CHECK DISC e An attempt has been made to record copy once contents on a disc that is not CPRM compatible such as DVD R A disc loaded cannot be played back on this unit since the region number of the disc does not match that of the unit pg 6 COPY PROHIBITED CAN NOT PLAY UNREADABLE DISC CHECK DISC e The unit
58. DVD Even if a play list is deleted the titles recorded and the library e Press HDD or DVD to choose the corresponding deck information are not affected at all e mM Umm CABLE SAT Modify Index Ul 1 Perform steps 1 of Edit Scenes gt pg 53 before olo continuing HDD DVD 2 Perform steps 5 8 of Modify Index gt pg 50 Modify Play List Name 1 Perform steps 1 of Edit Scenes gt pg 53 before continuing 2 Perform steps 2 5 of Modify Title Name pg 50 NAVIGATION Modify Category pun 1 Perform steps 1 of Edit Scenes lt pg 53 before continuing 2 Perform steps 2 4 of Modify Category gt pg 51 Scan For Title From Library Press NAVIGATION The Library Database Navigation screen appears 2 Press AV lt I gt to select the appropriate sort button to sort the Nue information then press ENTER NEED DATE Sort by date Ve pue DISC Sort by disc number MA ME CATEGORY Sort by category pe PUR Sort by name ENTER e DATE and DISC No are available for the DVD deck only Press AV lt D to select the desired title then press ENTER e Playback begins automatically after the selected title is located NOTE If a disc registered in the library is recorded or modified on DVD units from other manuf
59. E then press ENTER Press AV until the picture appears in its best quality then press ENTER e Repeat steps 2 4 as necessary 5 Press RETURN to return to the Manual Channel Set screen 6 Press SET UP to close the Confirmation screen Clock Set IMPORTANT If you performed Auto Set Up gt pg 18 or Preset Download gt pg 19 without ever having set the clock previously the unit s built in clock is also set automatically Perform the following steps only if Auto Clock Set has not been performed correctly by Auto Set Up or Preset Download OR you want to change Just Clock setting gt Just Clock in the right column e Turn on the unit e Turn on the TV and select the AV mode e Slide the TV CABLE SAT DVD switch to DVD CABLE SAT TV ID DVD e olo 1 ENTER Press SET UP to access the Main Menu screen 2 Press lt gt to select INITIAL SET UP then press V Press lt gt to select CLOCK DVD VIDEO SET UP HDD DVD SET UP aU Medie INITIAL SET UP SET then press V NOTE When you have selected CE A REPUBLIKA POLSKA or OTHER EASTERN for the country setting pg 18 you cannot use Just Clock function Skip steps 5 and 6 4 Press AV to select YEAR then press ENTER Press AV to set the year then press ENTER e Repeat the same procedure to set the date and time e When you set the dat
60. EDITING EN 61 COMPONENT If a connected appliance s input is compatible with Y PB PR signals set to COMPONENT You can obtain a high quality Y PB PR picture Switch the TV to the input that you can watch component video pictures B L 1 INPUT VIDEO S VIDEO VIDEO If a connected appliance s output is compatible only with regular video signals set to VIDEO S VIDEO If a connected appliance s output is compatible with Y C signals set to S VIDEO You can obtain a high quality picture For connection be sure to use a 21 pin SCART cable that is compatible with the Y C signal NOTES e f L 1 OUTPUT is set to SCART S VIDEO SCART RGB or COMPONENT it is not possible to set L 1 INPUT to S VIDEO e f L 2 SELECT is set to DECODER it is not possible to set L 1 INPUT to S VIDEO e f L 2 SELECT is set to DECODER it is only possible to set L 1 OUTPUT to SCART VIDEO e Component video signals are not output from the L 1 IN OUT connector e When Progressive scan mode is engaged it is not possible to select the setting of L 1 OUTPUT pg 69 L 2 Select Setting Set L 2 SELECT to the appropriate mode depending on the type of appliance connected to the unit s L 2 IN DECODER connector Perform steps 1 and 2 of L 1 Output And L 1 Input Setting on the left column 2 Press AV to select L 2 SELECT then press ENTER
61. EO or S VIDEO pg 61 4 when using this unit as the recording deck press REC MODE repeatedly to set the recording mode 5 Engage the Play mode of the source player 6 Engage the Record mode of the recording deck 7 Stop recording on the recording deck then stop playback on the source player NOTES All necessary cables can be obtained from your dealer e For Y C signal input output be sure to use a 21 pin SCART cable that is compatible with the Y C signal e When you use this unit as the source player for editing be sure to set SUPERIMPOSE to OFF before starting lt pg 69 e f you are using another recorder with S Video and Audio output connectors connect its S Video and Audio output connectors to this units S VIDEO and AUDIO input connectors on the front panel Then set the unit s input mode to F 1 in step 3 and set F 1 INPUT to S VIDEO pg 62 Output Input Set e Turn on the TV and select the AV mode e Slide the TV CABLE SAT DVD switch to DVD CABLE SAT TV DVD ENTER L 1 Output And L 1 Input Setting The L 1 IN OUT connector accepts and delivers either a composite signal regular video signal or a Y C signal a signal in which the luminance and chrominance signals are separated Set L 1 OUTPUT and L 1 INPUT to the appropriate mode depending on the type of appliance connected to the unit s L 1 IN OUT
62. EW Timer Programming function prolongs the stop time of the programming e When two successive programmes are recorded on a DVD RW disc with SHOWVIEW Timer Programming function the beginning of the second one may be left off the recording e f the copy limited programme is received during timer recording the unit enters Record Pause mode Recording starts again if it is switched to a recordable broadcast during the time you programmed IMPORTANT If you have moved to a different area or if a broadcasting station s channel number has been changed the wrong channel number will be displayed the SHOWVIEW programme screen in step 7 When this happens set the correct Guide Program number for that station gt pg 70 SHOWVIEW System Setup Satellite Receiver Users To timer record a satellite broadcast using the SHOWVIEW system Perform Satellite Receiver Control Setting gt pg 23 Perform SHOWVIEW Timer Programming gt pg 44 Leave the satellite receiver s power on e ro Weekly Daily Recording You can record programmes with one of the following weekly daily timer settings For the HDD deck When you select a mode other than ONCE the space on the hard disk drive is saved for new recordings by overwriting previous recordings To prevent loss of a needed recording backup programmes you wish to save by dubbing them to DVD discs before overwriting previous record
63. ICAM Bilingual NICAM Monaural NOTES e SUPERIMPOSE must be set to AUTO Otherwise the on screen displays will not appear pg 69 e f the quality of stereo sound being received is poor the broadcast might be received in monaural with better quality Selection Of The Audio Channel To Be Recorded On A Disc When a programme is recorded on a DVD RAM or DVD RW disc in VR mode all audio channels of the receiving programme are recorded on the disc When you record a programme on a DVD R or DVD RW disc in video mode select the desired audio channel NICAM to be recorded on the disc lt pg 68 NOTE Before playing back a programme recorded in stereo or a bilingual programme refer to Audio Channel Selection on page 29 38 EN BASIC OPERATIONS ON HDD DECK Basic Recording e Turn on the unit e Turn on the TV and select the AV mode e Slide the TV CABLE SAT DVD switch to DVD ATTENTION The HDD on the unit requires approximately 20 seconds to start up after the unit has been turned on during which no operation can be made HDD JVC Ur D B L CABLE SAT TV DVD HDD 0 9 PR REC MODE Press HDD so that the HDD lamp lights up on the unit 2 Press PR or th
64. ISPLAY the time indication changes as follows Elapsed recording time Disc remaining time Clock Back to the beginning Receiving Stereo And Bilingual Programmes Your unit is equipped with a Sound Multiplex decoder A2 and a Digital stereo sound decoder NICAM making reception of stereo and bilingual broadcasts possible When the channel is changed the type of broadcast being received will be displayed on the TV screen for a few seconds Type of Broadcast Being On screen Display Received A2 Stereo A2 Bilingual Regular Monaural NICAM Stereo NICAM Bilingual NICAM Monaural NOTES e SUPERIMPOSE must be set to AUTO Otherwise the on screen displays will not appear pg 69 e f the quality of stereo sound being received is poor the broadcast might be received in monaural with better quality Selection Of The Audio Channel To Be Recorded On A Disc When a programme is recorded on a DVD RAM or DVD RW disc in VR mode all audio channels of the receiving programme are recorded on the disc When you record a programme on a DVD R or DVD RW disc in video mode select the desired audio channel NICAM MONOY to be recorded on the disc gt pg 68 NOTE Before playing back a programme recorded in stereo or a bilingual programme refer to Audio Channel Selection on page 29 AQ cn BASIC OPERATIONS ON HDD DECK Basic Playback e Turn on the unit e Turn on the TV and select the AV m
65. ITIAL SET UP gt MANUAL CH SET DGOER RETURN SETUP SELECT WITH THEN PRESS ENTER mene PRESS SET UP TO EXIT EXT SELECT ATTENTION Guide Program numbers are not set when channels are stored manually pg 70 SHOWVIEW System Setup 72 cy SUBSIDIARY SETTINGS Delete A Channel Perform steps 1 5 of Manual Channel Set pg 71 2 Press AV lt I gt to select the channel you want to delete 3 Press X to delete a channel The channel next to the cancelled one moves up one line e Repeat steps 2 3 as necessary Press SET UP to close the Confirmation screen Change Station Channel Position Perform steps 1 4 of Manual Channel Set pg 71 2 Press lt I gt to select MOVE then press ENTER Press AV lt D to select the channel you want to move then press ENTER Press AV lt D to select the new channel position then press ENTER Example If you moved the station in position 4 to position 2 the stations originally in positions 2 and 3 each move down one space SE INITIAL SET UP gt MANUAL CH SET SE INITIAL SET UP gt MANUAL CH SET PR CH 1D CH ID gem ee um LS Pos Pot L oe PR CH 10 CH ID NEU ey BEI Ey rov o o a MOVE EDIT RETURN MOVE EDIT RETURN e Repeat steps 3 4 as necessary 5
66. If the camcorder has no S VIDEO output connector connect the camcorder s AUDIO VIDEO OUT connectors to the units AUDIO VIDEO input connectors on the front panel e When using a monaural camcorder connect its AUDIO OUT connector to the AUDIO L input connector on your unit 2 If the camcorder has an S VIDEO output connector connect the camcorders AUDIO OUT and S VIDEO OUT connectors to the unit s AUDIO and S VIDEO input connectors on the front panel 2 Press HDD or DVD repeatedly to select the recording deck Press PR 4 to select F 1 e Set F 1 INPUT to VIDEO for the VIDEO input connector or S VIDEO for the S VIDEO input connector depending on the connector being used lt pg 62 4 Press REC MODE repeatedly to set the recording mode 5 Start playback on the camcorder slightly before the actual point from where you wish to start dubbing 6 Press on the unit to start recording Or press and hold 6 and press on the remote control The dubbing starts 7 Press the unit then stop playback on the camcorder NOTES e All necessary cables can be obtained from your dealer e Refer to the camcorders instruction manual for operating procedure e The quality of dubbed picture becomes poorer than that of the original 60 en EDITING Edit To Or From Another Recorder You can use your unit as the source player or as the recording deck NOTE When using another recorder as the
67. LINK screen will appear 19 The Auto Set screen appears and remains on screen while the unit searches for receivable stations EXIT gt SELECT INITIAL SET UP gt AUTO SET PLEASE WAIT CANCEL SETUP SELECT WITH 4 THEN PRESS ENTER PRESS SET UP TO EXIT EXIT 9 SELECT 8 View the Confirmation screen AUTO SET COMPLETED or SCAN COMPLETED is displayed on the TV screen 9 Press SET UP to complete the setting e Using the Confirmation screen you can skip or add channel positions enter station names and perform other operations Refer to pages 71 72 for the procedures e Depending on reception conditions the stations may not be stored in order and the station names may not be stored correctly e For information on scrambled broadcasts refer to When Receiving A Scrambled Broadcast pg 72 IMPORTANT e n certain reception conditions station names may not be stored correctly and Auto Guide Program Number Set may not work properly When the Guide Program numbers are not set properly the programme that you do not intended to record will be timer recorded by the SHOWVIEW system of the unit When programming the timer using the SHOWVIEW system be sure to check the desired channel is selected correctly pg 44 SHOWVIEW Timer Programming e Your unit memorises all receivable stations even if reception of s
68. N DVD DECK Parental Lock E EB E E EZ This function restricts playback of DVD VIDEO discs which contain violent and other scenes according to the level set by the user For example if a movie which includes violent scenes supports the parental lock feature such scenes which you do not want to let children view can be cut or replaced by other scenes e Turn on the unit e Turn on the TV and select the AV mode e Slide the TV CABLE SAT DVD switch to DVD e Press DVD so that the DVD lamp lights up on the unit CABLE SAT TV DVD DVD 0 9 ENTER AV lt gt SET UP To Set Parental Lock For The First Time While stopped Press SET UP to access the Main Menu screen 2 Press lt gt to select DVD VIDEO SET UP then press V Press lt gt to select DVD VIDEO SET UP PARENTAL LOCK then LANGUAGE SET _AUDIO OUTPUT PARENTAL TOCK pisc PLAY SET UP press V COUNTRY CODE C SELECT WITH amp THEN PRESS ENTER QS PRESS SET UP TO EXIT EXT SELECT 4 P ress A y to se DVD VIDEO SET UP T OST PARE NTAL LEVEL then press LANGUAGE SET AUDIO OUTPUT PARENTAL LOCK DISC PLAY SET UP ENTER 5 Press AV to select the desired level then press ENTER e The smaller the value of level is the more restrictive the Parental Lock level
69. O EDIT NAVIGATION AVP ENTER Play List It is a collection of the scenes A play list can be freely edited and played back without ever changing any original recording data Using the random access of a disc which allows video data to be instantly read no matter where it is on the disc a play list includes information such as the timer counter for the playback start point and end point indexes for checking the contents of recorded data category information and more Playback according to a play list you have created allows you to enjoy various combinations of video images from a single title Create Play List Press EDIT The Editing screen appears 2 DVD deck only Press AV lt P to select MODIFY under ORIGINAL PLAY LIST then press ENTER Press AV lt D to select CREATE then press ENTER Press AV lt P to select a title that includes scenes to be included in a play list then press ENTER 5 The playback pictures appear in the window on the screen The elapsed playing time starts counting with the arrow on IN OUT 6 Find the point where you want the created play list to begin then press ENTER with the arrow on IN OUT The edit in time is fixed and the elapsed playing time starts counting again 7 Find the point where you want the created play list to end then press ENTER with the arrow on IN OUT The edit out time is fixed e Press 4 4 gt P gt lt
70. ONTINUOUS PLAY OFF ON When this function is set to ON multiple titles on a disc are played back continuously one after another VIDEO MODE RECORDING ASPECT PRIORITIZE 4 3 PRIORITIZE 16 9 This is the setting for the aspect ratio used when you dub titles to DVD discs in video mode If the titles you want to dub are recorded in both 16 9 and 4 3 you must select one aspect ratio PRIORITIZE 4 3 If you select PRIORITIZE 4 3 even a title recorded in 16 9 is dubbed in 4 3 PRIORITIZE 16 9 If you select PRIORITIZE 16 9 even a title recorded in 4 3 is dubbed in 16 9 VIDEO MODE RECORDING AUDIO MAIN SUB This is the setting for the audio channel to be selected when dubbing titles to DVD discs in video mode Select either one of the two settings if the titles to be dubbed have two audio channels MAIN Select this to dub the main channel SUB Select this to dub the sub channel MP3 JPEG MP3 JPEG You can select files to play back when both MP3 files and JPEG files are recorded on a disc MP3 Select this to play back MP3 files JPEG Select this to play back JPEG files REC PLAY SET UP XP MODE REC AUDIO DOLBY DIGITAL LINEAR PCM You can select the audio format when you record a title in XP mode When this function is set to LINEAR PCM you can obtain a high quality audio sound DOLBY DIGITAL To record in Dolby Digital format LINEAR To record in Linear PCM format
71. OPERATIONS ON DVD DECK 35 NOTES t is recommended to format a DVD RAM disc before use if you use the disc on this unit for the first time e When using a brand new DVD RW disc format the disc either in VR mode or in Video mode pg 74 e Recordings made on DVD R RW disc must be finalised to play back on other DVD players Perform Finalise A Disc DVD Deck Only lt pg 75 e You can record up to 99 programmes and 999 play lists on each disc e Some programmes can only be recorded one time e When recording is started an index of the first part of recording is automatically recorded gt pg 49 To record satellite programmes refer to page 48 To delete the index refer to page 51 e Recording sometimes may stop or cannot be performed even if there is enough available capacity remaining on the disc Recording Mode MPEG format is used as recording format As guide for picture quality the bps unit is used to represent how much data can be recorded per second The larger this value is the better the picture quality becomes but more capacity is required for the recording Select XP or SP for programmes where quick movement occurs such as sports programmes and LP or EP for talk shows etc with relatively less movement The recording modes for a 4 7 GB disc are set as follows Recording Recording amount Maximum recording mode approx time approx S lt gt rx pg 37 The amount vari
72. P INITIAL SET UP gt MANUAL CH SET store a channel then press ENTER The Confirmation screen as co appears FU pem 7 Press AY to select BAND then press ENTER NENEENSS amp MOVE EDIT RETURN The programme currently received on the selected channel position appears behind the confirmation screen 8 Press AV to change the band between CH regular and CC cable then press ENTER Press AV to select CH then press ENTER Press AV to input the channel number you want to store e To enter the registered station name pg 85 press AV to select ID then press ENTER Press AV e For fine tuning adjustment press AV to select FINE then press ENTER Press AY to perform fine tuning e When storing a channel that sends scrambled broadcasts press AV to select DECODER then press ENTER Press AV to set DECODER to OFF is the default setting e When L 2 SELECT is set to VIDEO S VIDEO SAT VIDEO or SAT S VIDEO the DECODER setting cannot be changed lt pg 61 11 Press ENTER to enter new channel information The Confirmation screen appears 12 Press SET UP to close the Confirmation screen e To change positions see Change Station Channel Position pg 72 e f you wish to set station names other than the ones registered in your unit see Set Stations BY pg 72 IN
73. PRESS ENTER gt PRESS SET UP TO EXIT l EXT SELECT 5 Press AV to select GUIDE PROG then press ENTER Press AV to select the Guide Program number for the desired station as shown in the TV listings Then press ENTER e To change the Guide Program number in 10 increments press and hold AV 7 Press AV to select TV PROG then press ENTER Press AV to select the number of the unit s channel position on which the Guide Program number s broadcast is received by the unit or the satellite receiver Then press ENTER e Pressing AUX changes TV PROG to SAT e To timer record a satellite programme with the SHOWVIEW system you need to install the provided Satellite Controller and perform the procedure described in Satellite Receiver Control Setting lt pg 23 e Repeat steps 5 7 as necessary 8 Press SET UP to complete the setting 28 INITIAL SET UP gt GUIDE PROG SET GUIDE PROG x TV PROG RETURN SETUP amp ENTER D gt SELECT WITH THEN PRESS ENTER PRESS SET UP TO EXIT EXIT SELECT Guide Program Number Guide Program GUIDE PROG number refers to the assigned TV station numbers according to broadcast area for the SHOWVIEW timer recording The Guide Program Numbers can be found in most TV listings Tuner Set Your unit needs to memorise all necessary stations in channel positions in order to record TV programm
74. Recording HDD Deck e L 1 L 2 or F 1 has been selected as the input mode Set to the desired channel Camcorder recording is not possible e he camcorder has not been properly connected Confirm that the camcorder is properly connected e The input mode is not correct Set the input mode to F 1 gt pg 59 Timer Recording Timer programming cannot be made e Date and time is not correct Set date and time correctly gt pg 73 e Timer recording is in progress Timer programming can t be performed while a timer recording is in progress Wait until it finishes Timer programming recording does not start e Date and time is not correct Set date and time correctly gt pg 73 SHOWVIEW Timer Programming cannot be made e Date and time set on the unit is not correct Set date and time correctly gt pg 73 e The channel position does not correspond to that in the receiving area Set the correct channel position for the receiving broadcast pg 70 The SHOWVIEW system does not timer record properly e The units channel positions have been set incorrectly Refer to SHOWVIEW System Setup lt pg 70 and re perform the procedure Automatic Satellite Programme Recording does not start e The satellite receiver is not connected properly to this unit Connect the satellite receiver to the L 2 IN DECODER connector pro
75. UNLOCK appears on the front display panel TROUBLESHOOTING 77 Before requesting service for a problem use this chart and see if Playback DVD Deck you can solve the trouble yourself Small problems are often easily solved and this can save you the trouble of sending your unit off The DVD deck cannot be operated for repair e The DVD deck is not selected Initialising DVD Deck Only Press DVD so that the DVD lamp lights up on the unit e he TV receiver s channel selector is not set to the AV mode Set the TV to its AV mode e When interlace scanned programme is played back progressive General scan mode is selected Press and hold PROGRESSIVE SCAN until disappears from No power is supplied to the unit the front display panel pg 69 Press 0 1 to turn off the unit press and hold 1 then press for two seconds or more e The AC power plug is disconnected from the mains outlet ach or stop immediately after playback is starte ressin Connect the AC power plug to the mains outlet securely Gn he front display panel DISC appears pg 17 e he disc is loaded upside down Place the disc on the disc tray with the playback surface facing Remove the batteries wait for 5 minutes or more then load the down gt pg 8 butteries again A disc not being compatible with the unit is loaded e The setting of the remote cont
76. When a playback only disc is played playback stops and the still image at the time you press remains on the TV screen Pressing again resumes a programme received with the unit s tuner e f amp is pressed during playback playback stops then the disc tray opens NOTE When the Library Database Navigation screen appears choose a thumbnail image of the desired title on the TV screen then press SELECT or ENTER pg 50 26 EN BASIC OPERATIONS ON DVD DECK Playback Features e Turn on the unit e Turn on the TV and select the AV mode e Slide the TV CABLE SAT DVD switch to DVD e Press DVD so that the DVD lamp lights up on the unit CABLE SAT X 0 9 TOP MENU ENTER MENU 44 SLOW gt gt gt gt SLOW il Locating A Desired Scene Using The DVD Menu DVD 0 0 TIU RAM VIDEOR SVCD 60 DVD VIDEO finalised DVD R RW Video mode discs may have top menu and disc menu Top menu DVD discs generally have their own menus which show the disc contents These menus contain various items such as titles of a movie names of songs or artist information You can locate a desired scene by using the top menu displayed on the TV screen Press TOP MENU to access the top menu Disc menu Disc menus include playback data angle menu subtitle menu etc specific to each title Press MENU to access the disc menu
77. a disc e Editing can be performed after recording such as deleting unwanted parts DVD RW Video mode e Can be played back on other DVD players e New recording can be performed by erasing all the data on a disc once played back DVD R e Can be played back on other DVD players e Suitable when keeping a recorded disc for a long time File Structure Of Discs DVD VIDEO Typically DVD VIDEO discs are made up of larger units called titles Each title has a number title number that can be used to select desired titles Titles are further divided into units called chapters Each chapter has a number chapter number that can also be used to select desired chapters Note that some discs are not divided into titles and chapters When you record a programme on a DVD RAM RW VR mode disc A single recording session results in a single title a single chapter However chapter marks are automatically inserted when recording is paused or audio changes from monaural to stereo due to commercial breaks etc It is also possible to insert chapter marks at desired locations during playback gt pg 27 When you record a programme on a DVD R RW Video mode disc A single recording session results in a single title a single chapter However chapter marks are automatically inserted when recording is paused or audio changes due to commercial breaks etc It is also possible to insert chapter marks at desired locations during eith
78. a region number other than 2 e DVD RAM 2 6 GB 5 2 GB e DVD RAM TYPE1 Region Number The world is divided into 6 regions for DVD VIDEO discs DVD VIDEO discs are assigned a region number to indicate which region they may be played back in A disc cannot be played back on this unit unless the region number of the disc matches that of the unit The region number for this unit is 2 Only discs whose region number includes 2 or ALL can be played back such as shown below Examples of DVD VIDEO labels which can be played back using this unit 2 3 E 53 Marks of discs in this instruction manual Allows operation with a DVD RAM disc Allows operation with a Video CD Super Video CD SVCD disc Allows operation with a Allows operation with DVD R disc Auto an Audio CD disc Allows operation with a DVD RW disc Allows operation with a disc including MP3 files Allows operation with a DVD VIDEO disc Allows operation with a disc including JPEG files Recording Medium And Format DVD RAM e Recording and erasing can be performed as many times as possible on a disc e Editing can be performed after recording such as deleting unwanted parts e While recording it is possible not only to start playback of a programme currently being recorded but also to watch another programme previously recorded DVD RW VR mode e Recording and erasing can be performed as many times as possible
79. acturers it may become impossible to operate properly Register Disc When a disc that is not registered in the library is loaded a message appears confirming if the disc should be registered If registering perform the following procedure 1 Press lt gt to select REGISTER then press ENTER to confirm the registration 2 Press NAVIGATION to return to the normal screen NOTES e is not possible to register discs formatted on devices other than JVC s DVD recorders e t is not possible to register discs recorded on devices other than JVC s DVD recorders e is not possible to register discs when SAVE AS LIBRARY is set to OFF pg 68 wavigation Playback With MP3 JPEG Navigation DVD DVD Audio Tz E Ed E EZ E2 Es E EZ This unit can play back discs that MP3 WMA sound files and JPEG image files taken with digital still cameras or other devices are recorded The MP3 WMA JPEG Navigation enables you to search and select the desired files recorded on CD R RW or CD ROM discs very easily 2 ROOT 001 IT S SHOWTIME Bz CLASSIC CLUB SEXY GUY GOMAKI DANCE HEY AYAYA EUROPE DOOR TO TOMORROW I WISH FOREIGN GROUP REASON ASAMI FOREIGN ROCK DIE ANOTHER DAY JAMES BOND 4 Selected group number total number of groups on the disc Selected file number total number of files in the group that ntains the selected file Elapsed time MP3 only Name of
80. ailure was occurred e When normal recording timer recording Live Memory Recording or Automatic Satellite Programme Recording lt pg 48 is performed e When the LIVE MEMORY setting is changed lt pg 68 e When tuner channel setting is performed gt pg 70 e When dubbing is performed by pressing DUBBING cF pg 56 e When DV is selected by pressing PR lt pg 58 BASIC OPERATIONS ON HDD DECK c 44 Recording playback Status Display CABLE SAT TV DVD LIVE ON SCREEN Live Memory Playback status can be checked by pressing ON SCREEN to display the bar meter on the superimpose display The current status is superimposed on the TV screen gt pg 15 When using Live Memory playback NOTES e Live Memory Playback cannot be performed for approximately 30 seconds after recording has started e Although high speed search up to approximately 30 seconds before the current recording point is possible during Live Memory Playback once the current recording point is reached the unit resumes normal playback and maintains a delay of approximately 30 seconds so that recording and playback can continue e When using Live Memory Playback during timer recording playback continues even after the end of the recording e When using Live Memory Playback during timer recording playback is automatically stopped just before recording starts and then recording starts when the time a
81. ain to engage the ITR mode e On the front display panel 0 30 appears 3 If you want to record for more than 30 minutes press to extend the time Each press extends recording time by 30 minutes NOTES e You can only perform ITR using the 6 button on the unit e If DIRECT REC is set to ON in the menu Instant Timer Recording ITR function does not work pg 68 e When the recording capacity becomes full during timer recording or Instant Timer Recording the unit is automatically shut off BASIC OPERATIONS ON HDD DECK 39 Watch Another Programme While Recording On The Unit While recording is going on you can watch another programme on the TV by using the TV s tuner NOTE It is required that the remote control is set to be able to operate the TV in advance lt pg 63 1 During recording press TV AV VIDEO to select TV mode e Video mode is disengaged and the video lamp VIDEO on the unit is turned off e The programme received on the TV s tuner is displayed on the TV Screen 2 Slide the TV CABLE SAT DVD switch to TV Press repeatedly to select the desired channel NOTE If a decoder is connected to the unit lt pg 66 you can select a scrambled channel as well as other normal channels Elapsed Recording Time And Disc Remaining Time Indication During recording press DISPLAY repeatedly until the desired indication appears on the front display panel e Each time you press D
82. back received on this unit is recorded when you dub the Release the Parental Lock temporarily or change the set level programme to an external recording equipment pg 34 Set SUPERIMPOSE to pg 69 Playback HDD Deck e here are cases when the operation is prohibited on the disc e Lightning or static electricity may cause malfunction of the unit e The HDD deck is not selected Press 1 turn the power off then press the button again to Press HDD so that the HDD lamp lights up on the unit turn the power on 78 cn TROUBLESHOOTING Recording DVD Deck The desired programme cannot be recorded e The channel position does not correspond to that in the receiving area Set the correct channel position for the receiving broadcast gt pg 70 Recording cannot made e No disc or a disc not being compatible with the unit is loaded Load a recordable disc on the unit gt pg 5 e The disc loaded is not formatted Format the disc gt pg 74 e A finalised DVD R disc is loaded Recording cannot be made on finalised discs Load a recordable disc on the unit e The disc is full or does not have enough space for the title to be recorded Clear unnecessary titles on the disc or load a blank disc pg 51 e he DVD RAM disc loaded has had its protect tab slid to the protect position Release the protect tab gt pg 8
83. can programme this unit to timer record as many as 32 programmes With the SHOWVIEW system timer programming is greatly simplified because each TV programme has a corresponding code number which your unit is able to recognize You can use the remote control to enter the SHOWVIEW number e Make sure that the unit s built in clock is set properly e Turn on the unit e Turn on the TV and select the AV mode e Slide the TV CABLE SAT DVD switch to DVD m CABLE SAT TV DVD 0 9 CANCEL PROGRAMME ENTER RETURN CLEAR DISPLAY VPS PDCO Load a recordable disc if recording to DVD 2 Press PROGRAMME to access the programme top screen Press AV gt to select SHOWVIEW then press ENTER e When PROGRAMME FULL DELETE UNWANTED TIMER PROGRAMMES appears on the TV screen you need to cancel some of the reserved programmes pg 47 4 Press the number keys to enter the SHOWVIEW number of a programme you wish to record OR PUDE Press AV l gt to select the desired number key on the screen then press ENTER Hepeat to enter all needed numbers 5 Press AY to select RECORD then press ENTER Press AV to select the desired recording deck then press ENTER Press V4 gt to select CONFIRM then press ENTER e f the number you entered is invalid 4 amp 3 HOWVIEW NO ERROR CONFIRM SHOWVIEW NO THEN RETRY appears on the TV screen Input a valid SHOWVIEW number
84. ct CANCEL then press ENTER 1 0 Press EDIT to return to the normal screen NOTES e There may be a discrepancy of several seconds between the scene you intend to edit and the scene which is actually edited e Available recording capacity may not match the deleted part after deletion 52 EN NAVIGATION Divide Title Press EDIT The Editing screen appears 2 Press AV lt D to select DIVIDE then press ENTER Press AV lt I gt to select a title to divide then press ENTER 4 Locate a point to divide by pressing the appropriate buttons 44 gt gt Il 5 Confirm the arrow is on DIVIDE then press ENTER at the dividing point e The first picture start of the newly created title appears in the bottom right window 6 Press lt gt to select PREVIEW then press ENTER e The first several seconds of the newly created title is played back then the playback pauses at the dividing point e To undo the division press lt gt to select RETRY then press ENTER Repeat the above procedure to locate another point to divide 7 Press lt gt to select then press ENTER 8 Press EDIT to return to the normal screen NOTE There may be a discrepancy of several seconds between the scene you intend to edit and the scene which is actually edited Modify Chapter You can create and delete chapter marks in titles Perform steps 1 4 of Modify Inde
85. d model name etc may not appear depending on the connected equipment Time counter for the connected DV equipment Sound monitor mode m e 0 8 s 15 Remote control switch 16 Auto capture button 17 Sound monitor switch Elapsed recording time Basic Connections TV aerial cable ANTENNA IN COMPONENT VIDEO OUT Mains outlet S VIDEO OUT Mains power cord ANTENNA L 1 IN OUT T AUDIO OUT Component video cable not provided Audio cable S Video not provided cable t HF cable 21 pin SCART Ms i ir provided provided TV Its essential that your unit be properly connected ATTENTION Your TV must have a 21 pin AV input connector SCART for the basic connection to the unit THESE STEPS MUST BE COMPLETED BEFORE ANY VIDEO OPERATION CAN BE PERFORMED sure the package contains all of the accessories listed in SPECIFICATIONS on page 81 2 Place the unit on a stable horizontal surface 3 Connect the unit to a TV depending on the TV and cables you use INSTALLING YOUR NEW UNIT en 47 Basic Connection To connect to a TV with 21 pin SCART input connector Disconnect the TV aerial cable from the TV 2 Connect the TV aerial cable to the ANTENNA IN connector the rear pan
86. d per second The larger this value is the better the picture quality becomes but more capacity is required for the recording Select XP or SP for programmes where quick movement occurs such as sports programmes and LP or EP for talk shows etc with relatively less movement mode approx time approx P X 5 FR60 FR360 1 6 hours c pg 37 The amount varies core Was FR420 selected time 1008 FRA80 e For details on FR mode refer to Free Rate Function lt pg 37 Recording Resume Function If there is a power outage during recording Instant Timer Recording ITR gt pg 39 or timer recording gt pg 44 46 the recording will resume automatically when power is restored to the unit unless the units memory backup has expired Recording Features e Turn on the unit e Turn on the TV and select the AV mode e Slide the TV CABLE SAT DVD switch to DVD e Press HDD so that the HDD lamp lights up on the unit TV DVD TV AV VIDEO HDD CABLE SAT PR DISPLAY Instant Timer Recording ITR This easy method lets you record for from 30 minutes to 6 hours selectable in 30 min increments and shuts the unit off after recording is finished Press on the unit to start recording 2 Press ag
87. dio quality of this unit are not guaranteed for discs that do not conform to the Compact Disc specification CD DA Before you play back a CD check for the CD logo and read the notes on the package to confirm that it conforms to the Compact Disc specification e Depending on the intentions of the author of the software recording conditions of DVD discs and Video CD SVCD discs may be restricted Since this unit plays back discs according to the intentions of the author of the software as indicated on the disc some functions may not operate as commanded e When switching from the first layer to the second layer of double layered DVD VIDEO discs the image and sound may be momentarily distorted This is not a malfunction e DVD AUDIO discs compatible with DVD video players can be played e Super Audio CDs SACD compatible with conventional CD players can be played Unplayable Discs The following types of discs cannot be played using this unit Do not attempt to play back any kind of disc that is damaged cracked warped or repaired with adhesive tape or discs in unusual shapes heart shaped octagonal or other forms If such discs are accidentally played back it may cause noise that can lead to speaker damage e CD ROM discs including PHOTO CD and CD G e Discs recorded in Packet Write UDF format e 1 3 GB double density CDs DDCD e High density CDs HDCD The following discs also cannot be played back e Discs of
88. e press and hold AV to change the date 15 days e When you set the time press and hold A V to change the time by minutes 5 Press AV to select JUST CLOCK then press ENTER Press AV to set to the desired mode then press ENTER e The default setting is OFF e For the Just clock function refer to Just Clock on the right column e f you set to OFF you can disregard the next step as you won t be able to receive regular clock adjustments 6 Press AV to select TV PROGRAMME then press ENTER Press AV to set the channel position to the number representing the station transmitting clock setting data then press ENTER e The unit is preset to receive clock setting and adjustment data from channel position 1 SETUP amp amp tNTER SELECT WITH THEN PRESS ENTER eee PRESS SET UP TO EXIT SUBSIDIARY SETTINGS y 73 7 Press SET UP to start the clock operation NOTES e Just Clock when set to ON adjusts the unit s built in clock every hour except for 23 00 0 00 1 00 and 2 00 e Just Clock is not effective when the unit s power is on the unit is in the Timer mode a difference of more than 3 minutes exists between the built in clock s time and the actual time the unit is in the Automatic Satellite Programme Recording mode 7 pg 48 the unit is in the Power Save mode gt pg 69 L 2 SELECT is set to SAT VIDEO
89. e total time of the programme to be recorded and either the remaining disc space or the specified recording time from 60 minutes to 480 minutes Torecord the entire programme within the actual remaining disc space DVD deck only Select FR JUST in a recording mode selection procedure e Note that this function is available only for timer programming recording lt pg 44 46 and dubbing from HDD to DVD t pg 56 To record the entire programme by specifying the desired recording time Select FR60 FR360 FR420 or FR480 in a recording mode selection procedure gt pg 35 38 44 46 Torecord a 25 min long daily programme five times just on the same DVD disc for example Perform SHOWVIEW Timer Programming gt pg 44 procedure Be sure to set the recording mode to FR125 and set Weekly Daily Rec Function to MON FRI in step 8 to fit the total recording time to the whole disc space A 1st B 2nd Blank C 3rd D 4th C E 5th When the same programme is recorded in SP mode instead of in FR125 the 5th programme cannot be recorded A 1st B 2nd C 3rd D 4th E Blank 20 min Blank NOTES You can programme this unit to timer record regardless of the disc remaining time When the disc remaining time is not enough the unit performs Relief Recording pg 46 To avoid this make sure of the disc remaining time before setting timer programming
90. e The Satellite Controller may not work with all types of satellite receiver e For some satellite receivers you need to set its channel input mode to 2 digit f your satellite receiver has more than two channel modes be sure to set to All Channel Mode For details refer to the instruction manual of the satellite receiver e When selecting the satellite receivers channel step 9 signals from the remote control may interfere with signals transmitted from the Satellite Controller In this case move the remote control as close to the unit s infrared beam receiving window as possible Basic Playback DVD DVD Audio E3 kd E32 E3 ES e Turn on the unit e Turn on the TV and select the AV mode e Slide the TV CABLE SAT DVD switch to DVD DVD JVC gt d 05 1 OP P To H CABLE SAT TV DVD SELECT ATTENTION e t takes approximately 30 seconds to read disc depending on the type and condition of the disc since this unit is multi disc compatible DVD RAM DVD RW DVD R It may even take several minutes when a disc is dirty scratched or warped e t may take a few seconds to start playback This is not a malfunction e Forward reverse high speed search and other operations
91. e currently watching temporarily recorded on the background pg 41 Temporary recording for Live Memory 1 Press 44 or 4 4 to locate the point to start recording from e Each press of 4 4 increases the reverse search speed 2 Press on the unit to start Live Memory Recording Or press and hold 6 and press on the remote control Press to stop Live Memory Recording e The on air screen resumes NOTES e You cannot use Live Memory Recording for channels other than the channel you are currently watching e Recording speed is automatically set to SP mode when Live Memory Recording is started e Temporarily recorded data prior to the beginning of Live Memory Recording is erased when Live Memory Recording started To Move Back The Playback Position Slightly While Recording One Touch Replay Function You can move back the playback position while continuing to record or timer record Press e Each press skips back for approximately 7 seconds and resumes playback e Pressing while paused skips back for approximately 7 seconds and resumes pause To Resume Playback Of A TV Broadcast From The Paused Point You can resume playback of a TV broadcast you were recording or watching from the point you have paused 1 Press I to pause a TV broadcast e Recording continues when recording 2 Press to start Live Memory Playback e Playback resumes from the paused position 3 Press W to resume the on air
92. e functions may differ by system TV DVD Im OLO CABLE SAT ENTER INITIAL SETTINGS EN 19 If you have connected the unit to your TV via a 21 pin SCART cable gt pg 17 the unit will automatically perform Preset Download instead of the Auto Set Up in step 4 on page 18 After downloading the unit sets the clock and Guide Program numbers automatically e Slide the TV CABLE SAT DVD switch to DVD e Perform steps 1 to 3 of Auto Set Up pg 18 before continuing Press lt 1 gt to select T V LINK and press ENTER The T V LINK screen will appear ATTENTION Preset positions on the front display panel increase from PR 1 do NOT press any button on the unit or remote SETUP ENTER SELECT WITH THEN PRESS ENTER control until the front display panel Bm RETA shows clock time PR 1 or as illustrated on page 20 e When Preset Download is completed COMPLETED appears for about 5 seconds then the normal screen appears e f you press any button on the unit or remote control while downloading is in progress it will be interrupted NOTES e For details refer to the instruction manual of your TV e In the area where no TV station transmits PDC Programme Delivery Control signal the unit can perform neither Auto Clock Set nor Auto Guide Program Number Set e f there is a power cut or if you press or SET UP w
93. e number keys to select the channel you wish to record 3 Press REC MODE repeatedly to select the recording mode then press ENTER e Each time you press REC MODE the recording mode changes as follows XP SP LP EP FR60 FR360 420 FR480 gt Back to the beginning The value is selectable from 1 to 6 hours in 5 min increment by pressing lt gt repeatedly after selecting FR60 FR360 To change the value in 30 min increments press and hold i P e For details on the recording mode see the right column 4 Press on the unit to start recording Or press and hold and press on the remote control 5 Press twice to stop recording e Pressing once displays the confirmation message to stop recording Press again to terminate recording NOTE Continuous recording for over 48 hours is not possible Pause recording on HDD deck It is not possible to pause recording Pressing initiates Live Memory Playback However it is still possible to pause recording only when recording the channels of external sources L 1 L 2 F 1 and DV Press and hold then press on the remote To resume recording press and hold 6 then press on the remote No operation can be made with the buttons on the unit Recording Mode MPEG format is used as recording format As guide for picture quality the bps unit is used to represent how much data can be recorde
94. e remote control Lr NAVIGATION ORIGINAL lt 0026 FISH WORLD 1 25 12 03 THU 10 00 10 15 FROG WORLD SELECT WITH 4 THEN PRESS ENTER PRESS NAVIGATION TO EXIT NAVIGATION m ENTER menue Playback screen Indicates currently received TV programme Guidance for operations Scroll bar Appears when there are over nine registered titles or play lists The scroll bar only indicates that there are more titles or play lists hidden off the current screen display To show hidden titles or play lists press AV lt repeatedly Recording information for the title indicated by the arrow Index list Thumbnail still of each title Index a Indicates no index is registered D Indicates title in standby for timer recording EE Indicates no title is registered 7 Icons Indicate the record condition of each title e The Icons and their meanings This title is write protected This title has stereo sounds This title was recorded with timer recording This title is Weekly Recording Weekly Overwrite This title is Daily Recording Daily Overwrite This title is Daily Recording Weekly Overwrite This title has not been played back This title is copy protected NAVIGATION EN 49 Using Library Database Navigation system you can easily modify registered information edit the title or play list as wel
95. e use Scratches and dirt on the recording side of a disc may hinder proper playback and recording Also be careful that a DVD RAM disc may get scratched or dirt when removed from cartridge then put back in after use Storage Make sure that discs are kept in their cases If discs are piled on top of one another without their protective cases they can be damaged Do not put discs in a location where they may be exposed to direct sunlight or in a place where the humidity or temperature is high Avoid leaving discs in your car Maintenance of discs If there are fingerprints or other dirt adhering to a disc wipe with a soft dry cloth moving from the centre outwards If a disc is difficult to clean wipe with a cloth moistened with water Never use record cleaners petrol alcohol or any anti static agents CAUTION Sometimes during playback noise may appear or images may be garbled This is sometimes due to the disc It may not be up to industry standards These symptoms are caused by the discs not by the malfunction of the unit DISC INFORMATION EN 9 10 En INDEX Front View S VIDEO 4 VIDEO L MONO AUDIO R Q Infrared Beam Receiving Window Front Display Panel c pg 12 Disc Tray Open Close Button 4 gt 8 Stop Button Bl gt pg 25 40 Play Button c pg 25 40 Pause Button pg 25 40 Record Bu
96. eat playback is not performed TITLE REPEAT The current title is played back repeatedly CHAPTER REPEAT The current chapter is played back repeatedly Audio CD Video CD SVCD JPEG MP3 OFF Repeat playback is not performed ALL REPEAT The whole disc is played back repeatedly GROUP The current group is played back repeatedly TRACK REPEAT The current track is played back repeatedly GROUP REPEAT cannot be selected for Audio CD and Video CD SVCD discs TRACK REPEAT cannot be selected for JPEG discs To clear the on screen bar Press ON SCREEN To cancel Repeat Playback Hepeat the above procedure from step 1 select OFF in step 3 then press ENTER NOTES e Repeat Playback is not possible for a Video CD SVCD with PBC function e Repeat Playback may not work properly depending on the type of the disc being used A B Repeat Playback DVD DVD Audio Ed Ed E E2 E You can repeat the desired part During playback Press ON SCREEN twice to access the on screen bar 2 Press lt gt to select A B D 3 Press ENTER at the beginning of the desired part you want to repeat point A The elapsed playing time of the point A appears TITLE 99 TRACK 99 EACH 0 00 DVD 3D ON CINEMA AUTO 1 my c Jasco O ion Ca E3l A 1 25 58 E 4 Press ENTER at the end of the desired part you want to repeat point B The elapsed playing time of the point B appears e The selected par
97. ect Indicator 3D gt pg 32 Lights when a simulated surround effect is set to SD ON on the on screen bar Q Linear PCM Indicator LPCM Lights when XP MODE REC AUDIO is set to LINEAR PCM pg 68 for recording with HDD DVD RAM DVD R and DVD RW discs and when Linear PCM audio is played Q Random Programme Playback Mode Indicator RND PRGM c pg 33 RND Lights when Random Playback mode is set PRGM Lights when Programme Playback mode is set Repeat Mode Indicator 3 1 A B c pg 31 Select Repeat Playback mode on the on screen bar C Whole disc is played back repeatedly C1 A single title chapter track is played back repeatedly 5A B The selected part A B is played back repeatedly No display Repeat Playback mode is off Video Output Indicator gt 69 No display Indicates that interlace mode is engaged Indicates that progressive mode is engaged Example 9 lights when video output mode is in progressive mode Group Title Number Display Track Chapter Number Display Remaining Time Elapsed Time Indicator gt pg 28 36 Lights when remaining time of DVD RAM DVD R and DVD RW discs is displayed and lights out when elapsed time is displayed The right 6 digits of the Multi Display XB indicate elapsed or remaining time of each track No display Indicates elapsed time of the disc Displayed Indicates remaining time of the disc Remaining
98. ed times you may have preset into the timer This means that your unit will start and stop recording when the preset TV programmes actually start and end even if the broadcast time of a preset TV programme is changed NOTES e Make sure to press VPS PDCO after completing timer programming procedure to activate the VPS PDC recording function e When you use Manual Timer Programming set the start time VPS or PDC time exactly as advertised in the TV listing A different time than advertised will result in no recording e VPS PDC recording is also possible when a satellite receiver or a cable system is connected to L 2 IN DECODER connector on your unit e VPS PDC recording is also possible via the L 1 IN OUT connector How to check if the station being received transmits a VPS PDC signal 1 Hold down DISPLAY for about 5 seconds VPS PDC appears blinking on the front display panel If a VPS PDC signal is detected from the station VPS PDC will stop blinking If no VPS PDC signal is detected from the station VPS PDC will blink at a slower rate 2 Press DISPLAY again to return to normal display 46 en RECORDING Manual Timer Programming You can programme this unit to timer record as many as 32 programmes If you do not know the SHOWVIEW number for the programme you wish to record use the following procedure to set your unit to timer record the programme e Make sure that the unit s built in clock is
99. eed the skipped channels restore them gt pg 70 The channel cannot be changed e Recording or Live Memory recording is in progress Press to pause the recording change channels then press P to resume recording HDD deck only Channel settings that were made manually seem to have changed disappeared e After the manual settings were made Auto Channel Set was performed Perform Clock Set pg 73 TROUBLESHOOTING 79 On screen Message DISC NOT REGISTERED IN THE LIBRARY REGISTER DISC A disc that is not registered in the library has been inserted Register the disc as necessary gt pg 54 INSERT DISC XXXX e Appears when a title that has been selected in the library is not contained in the loaded disc CAN NOT RECORD OR MAKE PLAY LIST DELETE UNWANTED TITLES e Recording and or editing cannot be performed e The number of titles exceeds 99 e The number of play lists exceeds 999 SET CLOCK BEFORE TIMER PROGRAMMING e To set the timer programme the clock must be set in advance lt pg 73 PROGRAMME FULL DELETE UNWANTED TIMER PROGRAMMES e You can programme this unit to timer record as many as 32 programmes To programme more you need to cancel a timer programme already set gt pg 47 DISC NOT LOADED e Operation has been attempted when a disc is not loaded or loaded upside down gt pg 8 DISC NOT RECORDABLE INSERT RECOR
100. el of the unit Connect the ANTENNA OUT connector on the rear panel of the unit and the TV s aerial connector with the provided RF cable 4 Connect the L 1 IN OUT connector on the rear panel of the unit and the TV s 21 pin SCART connector with a provided 21 pin SCART cable e The L 1 IN OUT connector accepts and delivers either a composite signal regular video signal Y C signal or RGB signal e Set your TV to the VIDEO or AV Y C or RGB mode according to the type of your TV s SCART connector B S Video Connection To connect to TV s S VIDEO input and AUDIO input connectors Perform 11 3 in Basic Connection Connect the unit s S VIDEO OUT connector to the TV s S VIDEO input connector Connect the units AUDIO OUT connectors to the TV s AUDIO input connectors You can obtain high quality S VHS pictures e With S VIDEO connection you cannot use the Preset Download function pg 19 e f your TV is not stereo capable use the units AUDIO OUT connectors to connect to an audio amplifier for Hi Fi stereo sound reproduction eo Component Video Connection To connect to TV s component video input connectors Perform 11 3 in Basic Connection Connect the units COMPONENT VIDEO OUT connectors to the TV s component video input connectors Connect the units AUDIO OUT connectors to the TV s AUDIO input connectors e You can obtain high
101. elapsed playing time from the beginning of a programme DVD RAM DVD R DVD RW DVD VIDEO and HDD or a disc Video CD SVCD and Audio CD Press ON SCREEN twice to access the on screen bar 2 Press lt gt to select then press ENTER The pop up window appears under the selected item TITLE 99 TRACK 99 EACH 0 00 DVD CINEMA AUTO 1 5 5 E3 Press the number keys to enter the time then press ENTER Playback starts from the specified time Example To play back from a point 12 minutes 50 seconds elapsed TIME E gt TIME Press 1 2 TIME 1 2 BAR gt Press 5 Press 0 TIME 12 5 If you have specified a wrong selection Press CANCEL X for the last entered number or CLEAR for whole numbers to clear the wrong number then enter the correct one s before you press ENTER in this step To clear the on screen bar Press ON SCREEN NOTES e When is displayed on the TV screen in step 3 you have selected a point that excesses the recording time of the disc e Some DVD VIDEO discs do not contain time information and it is not possible to use the Time Search function In such cases O is displayed on the TV screen as well e This function is not possible for a Video CD SVCD with PBC function Simulated Surround Effect EZ E31 EM E E E EZ It is possible to get a simulated surround effect from your stereo
102. elect CANCEL then press ENTER 5 Press EDIT to return to the normal screen NAVIGATION 54 Delete Unwanted Part Of The Title DVD deck only You can delete unwanted part of the title Perform steps 1 3 of Modify Index lt pg 50 before continuing 2 Press AV lt D to select DEL SCENE then press ENTER Press AV lt D to select one title whose unwanted part you want to delete then press ENTER 4 The playback pictures appear in the window on the screen The elapsed playing time starts counting with the arrow on IN 5 Find the point where you want of EDITING gt ORIGINAL DELETE SCENE the deletion to begin then press ee ENTER with the arrow on IN The edit in time is fixed and the elapsed playing time starts counting again Find the point where you want the deletion to end then press ENTER with the arrow on OUT The edit out time is fixed e Press 4 4 gt PP 4 4 or I to find the edit in and edit out points 7 Press lt gt to select PREVIEW then press ENTER to preview the edited title 8 Press lt gt to select OK then press ENTER e f you do not want to delete the scene press EDIT or RETURN To modify the points Press EDIT or RETURN Hepeat steps 4 8 as necessary 9 Press lt gt to select DELETE then press ENTER The selected scene is deleted To cancel the deletion press lt gt to sele
103. ellite Receiver Users To timer record a satellite broadcast using Manual Timer Programming 1 Perform Satellite Receiver Control Setting gt pg 23 2 Perform Manual Timer Programming gt pg 46 In step 8 press AUX to change TV PROG to SAT Then press AV to enter the channel position for the satellite broadcast 3 Leave the satellite receivers power Relief Recording When a programme that is set for the DVD deck cannot be recorded properly the programme is recorded to the HDD deck instead in the same recording mode as set e f the remaining capacity of the hard disc is not sufficient the programme is recorded to the DVD deck until the remaining capacity of the DVD disc lasts e If JUST is selected for the recording mode the current recording mode for the DVD deck is applied ENTER 00 OLO CABLE SAT vC LIT DVD y TIMER RECORDING y 47 Check Programmes To check the whole list of programmes Press PROGRAMME to access the programme top screen 2 Press AV lt gt to select PROGRAMME LIST then press ENTER e The details of a selected programme appear on the top of the screen e The daily programme of a title is listed as one programme To check the list of programmes by date Press PROGRAMME to access the programme top screen 2 Press AV lt gt to select CALENDAR LIST then press ENTER 3 Press AV to
104. en press ENTER for confirmation The dubbing screen appears for 5 seconds NOTES e t is not possible to dub play lists on DVD discs e is not possible to dub pre recorded DVD VIDEO discs EDITING 57 About Disc Remaining Display The unit displays the time information for dubbing by bar meter By comparing the disc remaining time and the necessary time for dubbing of the selected items it is possible to check if the dubbing can be performed completely or not When performing the High Speed Dubbing Capacity of a disc Remaining capacity 2196 Dark green Length of already recorded item Light green Length of selected item Yellow Length of the item now being selected by arrow Red Excess over the capacity When performing the Just Dubbing TOTAL 105MIN e The unit displays the status on the assumption that the selected items are dubbed in the lowest transfer rate e The total time of a loaded disc is displayed on the right of the bar meter When performing the Manual Dubbing MAX FR240 e The unit displays the status on the assumption that the selected items are dubbed in the lowest transfer rate e The available highest transfer rate is displayed on the right of the bar meter 58 EN EDITING Dubbing You can dub programmes from a camcorder or DV equipment connected to the unit with a DV cable The unit s remote control allows you the limited control of the connected camcorder or DV equipm
105. ent functions during dubbing NOTES e Use the DV cable VC VDV 204U for connection e When you connect a PC to the DV IN connector we do not assure the normal operation of this unit Your unit O B Camcorder VC VDV 204U not provided DV connector DV equipment Connect camcorder or DV equipment to the DV IN connector on the unit s front panel 2 Press HDD Press PR to set the channel to DV e The on screen display for DV dubbing appears Press lt gt to select 99 m7 then press ENTER to display the remote icon facing to the right for the DV equipment 9 Press lt gt to select ais 49 95 then press ENTER QD n st E E DV JVC GR DV3500 SOUND1 repeatedly until the desired sound track appears on the TV screen AUDIO 1 Select this to record the original stereo sound played back on the connected DV rz ap ae equipment AUDIO 2 Select this to record the dubbed stereo sound played back on the connected DV equipment MIX Select this to record the sound of both AUDIO 1 and AUDIO 2 e Note that this selection is not available when the source programme is recorded in 16BIT 48 kHz mode Press REC MODE repeatedly to set the recording mode 7 Locate the point from where you want to start dubbing then stop
106. er recording or playback Once the disc has been finalised these chapter marks are deleted and new chapter marks are assigned automatically approximately every 5 minutes DVD RAM DVD RW DVD R or DVD VIDEO disc Title 1 Title 2 Chapter 1 Chapter 2 Chapter Chapter Chapter 3 e n Video mode even before finalising it is impossible to perform editing operations other than changing the disc name and or title names and deleting programmes and or titles e After finalising it is impossible to perform editing operations Chapter 1 DISC INFORMATION EN 7 Audio CD Video CD SVCD Typically Audio CD discs are divided into separate tracks each containing one song Each track is assigned a number For example the third track is Track 3 The same is true for Video CD SVCD discs However some discs are not divided into tracks Audio CD or Video CD SVCD Track 1 Track 2 Track 3 Track 4 JPEG MP3 Disc CD R RW ROM MP3 JPEG files put in directories nested in several levels on a disc will be organized as if they were put in single level directories groups by the MP3 JPEG Navigation of this unit gt pg 55 File structure of a disc before starting the MP3 JPEG Navigation file 1 mp3 file 2 mp3 file 3 mp3 file 4 mp3 file 6 mp3 file 7 jpeg file 8 jpeg file 9 jpeg 1 Directory CD file lt gt JPEG file File structure of the disc after s
107. es Auto Channel Set automatically assigns all receivable stations in your area to call them up by using the PR buttons without going through any vacant channels e Turn on the unit e Turn on the TV and select the AV mode e Slide the TV CABLE SAT DVD switch to DVD CABLE SAT TV DVD OLO Ex di ENTER AN ID SET UP IMPORTANT Perform the following steps only if Auto Channel Set has not been set correctly by Auto Set Up or by Preset Download gt pg 18 19 you have moved to a different area or if a new station starts broadcasting in your area Auto Channel Set 1 Press SET UP to access the Main Menu screen 2 Press lt gt to select INITIAL SET UP then press V Press lt gt to select TUNER SET then press V 4 Press AV Abe to select INITIAL SET UP AUTO CH SET then press TUNERSET CLOCK SET E NTE R AUTO CH SET MANUAL CH SET B x 2 5 Press AV lt D to select your country s name then press SAT CONTROL SET GUIDE PROG SET S A Cm SELECT WITH THEN PRESS ENTER ENTER PRESS SET UP TO EXIT Press AV lt P to select the language of your choice 7 Press ENTER twice e When you have connected the unit to a TV offering T V Link via a fully wired 21 pin SCART cable gt pg 17 the unit automatically performs the Preset Download and the T V
108. es selected time 8 hours e For details on FR mode refer to Free Rate Function gt pg 37 Recording Resume Function If there is a power outage during recording Instant Timer Recording ITR pg 36 or timer recording gt pg 44 46 the recording will resume automatically when power is restored to the unit unless the units memory backup has expired 36 BASIC OPERATIONS ON DVD DECK Recording Features DVD DVD VCD Audio RAM lust mulu CD e Turn on the unit e Turn on the TV and select the AV mode e Slide the TV CABLE SAT DVD switch to DVD e Press DVD so that the DVD lamp lights up on the unit e DVD Ue O TV AV VIDEO DISPLAY 00 01 TV DVD CABLE SAT PR Instant Timer Recording ITR This easy method lets you record for from 30 minutes to 6 hours selectable in 30 min increments and shuts the unit off after recording is finished Press on the unit to start recording 2 Press again to engage the ITR mode e On the front display panel 0 30 appears 3 If you want to record for more than 30 minutes press to extend the time Each press extends recording time by 30 minutes NOTES e You can only perform ITR using the button on the unit e If DIRECT
109. esponding buttons to operate the TV amp TV AV VIDEO PR TVA TV ii number keys e For some brands of TVs you must press ENTER after having pressed the number keys BRAND NAME JVC HITACHI MAGNAVOX MITSUBISHI PANASONIC SHARP SONY SAMSUNG SANYO SEARS TOSHIBA ZENITH 64 en REMOTE CONTROL Satellite Receiver Multi Brand Remote Control Your remote control can operate the basic functions of your satellite receiver set In addition to JVC satellite receivers other manufacturer s satellite receivers can also be controlled e Slide the TV CABLE SAT DVD switch to CABLE SAT IMPORTANT Although the provided remote control unit is compatible with JVC satellite receivers as well as many other models it may not work with your satellite receiver or in some instances may have limited function capability e Keep pressing SET UP down during step 1 1 Enter your satellite receiver s brand code using the number keys then press ENTER 2 Press 0 on the unit s remote control to turn on the satellite receiver and try operations gt step 3 e Once you have set the remote control to operate the satellite receiver you do not have to repeat this step until you replace your remote control s batteries e Some brands of satellite receivers have more than one code If the satellite receiver does not function with one code try entering another 3 Press the corresponding buttons to operate the satelli
110. ess ENTER FUNCTION SET REC PLAY SETUP DISPLAY SET VIDEO IN OUT 4 Press SET UP to complete the TN setting The boldface settings below SETUP SENTER SELECT WITH THEN PRESS ENTER indicate the settings at your 9 9 M 1 INPUT VIDEO S VIDEO VIDEO When connecting an appliance to the VIDEO input connector set to VIDEO S VIDEO When connecting an appliance to the S VIDEO input connector set to S VIDEO Digital Audio Dubbing You can dub selected audio from a DVD or Audio CD disc to a digital audio device However it is not possible to dub copy protected discs e Turn on the TV and select the AV mode e Slide the TV CABLE SAT DVD switch to DVD Example Dubbing to an MD Recorder a 2 O Digital audio device MD deck etc Optical cable Coaxial cable not provided not provided DIGITAL OUT COAXIAL Rear of unit DIGITAL OUT OPTICAL Note for connection Remove the protection cap from the cable 1 Connect the unit and a digital audio device using either an optional optical cable or an optional coaxial cable 2 Place a disc on the unit and load an MD on the connected digital audio device 3 Select the audio to be dubbed 4 start playback slightly before the actual point from where you wish to start dubbing
111. f the button reverses slow motion at 1 16 times 1 4 times and 1 2 times the normal playback gt gt e Each press of the button during playback advances the playback speed in 4 steps for forward direction Available only when paused e Each press of the button advances the still picture frame by frame e Pressing down for 2 or more seconds advances playback at 1 16 times the normal speed Then each press of the button advances 6 slow motion at 1 16 times 1 4 times and 1 2 times the normal 9 playback e Pressing once during Live Memory Playback Live Memory Recording returns to the screen on air 11 e Pressing twice during recording stops recording and returns to the Screen on air Pressing once pauses playback still picture playback Pressing repeatedly advances the still picture frame by frame JUMP Each press of the button during playback or Live Memory Playback jumps back for the selected time interval and resumes playback gt pg 43 Jump Search JUMP Each press of the button during playback or Live Memory Playback jumps forward for the selected time interval and resumes playback pg 43 Jump Search Pressing once skips forward for approximately 30 seconds and resumes playback Pressing repeatedly skips forward continuously as many times as pressed It is useful when skipping over unwanted sections o G Pressing once skips back for approximately 30
112. g 70 CLOCK SET gt pg 73 HDD DVD SET UP FUNCTION SET UP INITIAL SET UP e The procedure below shows how to set the desired option of the AUDIO REC mode as an example 1 Press SET UP to access the Main Menu screen 2 Press lt gt to select FUNCTION SET UP then press V 3 Press lt gt to select REC PLAY SET then press V Press AV to select AUDIO then press ENTER 5 Press AV to select the desired option then press ENTER Press SET UP to complete the setting DVD VIDEO SET UP HDD DVD SET UP FUNCTION SET UP MI RIS REC PLAY zen DISPLAY SET VIDEO IN OUT XP MODE REC AUDIO DOLBY DIGITAL AUDIO REC NICAM DIRECT REC INPUT COLOUR SYSTEM JUMP TIME 15 MIN SUBSIDIARY SETTINGS y 67 The boldface settings below indicate the settings at your purchase AUDIO OUTPUT DIGITAL AUDIO OUT DOLBY DIGITAL PCM STREAM PCM PCM ONLY Set to the appropriate mode according to the type of the device connected to DIGITAL OUT connector DOLBY DIGITAL PCM Select this when you connect the digital input connector of a Dolby Digital decoder or an amplifier with a built in Dolby Digital decoder STREAM PCM Select this when you connect the digital input connector of an amplifier with a built in DTS Dolby Digital or MPEG multichannel decoder PCM ONLY Select this when you connect the linear PCM digital inp
113. g between a recording point and a playback point as shown in the figure below Current playback point Live Memory Playback Current recording position Recording start point Recording point Playback Recording gt continues gt continues 30 min 1 hour Currently elapsed recording time Not only can this unit play back a programme previously recorded while recording or timer recording another programme but the unit also allows you to play back from the beginning of a programme while continuing to record the same programme Temporary recording for Live Memory This unit automatically records the channel being received within the specified range of time to the reserved space on the hard disc The time range can be set for 30 minutes 1 hour and 3 hours pg 68 NOTE Previous temporary recordings will be overwritten since the unit is always recording the channel being received Thus it is not possible to play back TV programmes recorded beyond the specified range of time since they are already overwritten To avoid this in order to save titles perform normal recording gt pg 38 timer recording gt pg 44 46 or Live Memory Recording lt pg 43 About limitation on temporary recording The temporary recording for Live Memory is cancelled in the following cases and will start all over again when it is to resume e When the power is turned off e When the system is powered again after a power f
114. has detected invalid contents at the start or in the middle of playback e When an incompatible disc is loaded gt has been pressed lt pg 6 THE i LINK DEVICE THAT YOU HAVE CONNECTED IS NOT RECOGNIZED COULD NOT FORMAT THE DISC MAKE SURE THAT THE DEVICE IS CONNECTED PROPERLY AND CHECK THE DISC POWERED ON e Formatting is not complete since the disc may be dirty or e An attempt has been made to start DV dubbing when a digital damaged Take out the disc clean it and retry gt pg 9 74 video camera is not properly connected to the unit e ion CAN NOT FINALISE THIS DISC Senger Me T Poe e Finalising is not complete since the disc may be dirty or damaged Take out the disc clean it and retry gt 9 75 CAN NOT CANCEL FINALISATION OF THIS DISC e Cancelling disc finalisation is not complete since the disc may be dirty or damaged Take out the disc clean it and retry gt pg 9 75 GENERAL Power requirement AC 220 V 240 V 50 Hz 60 Hz Power consumption Power on 37 W Power off 19 3 W Temperature Operating 5 C to 40 C Storage 20 C to 60 Operating position Horizontal only Dimensions WxHxD 435 mm x 70 mm x 345 5 mm Weight 6 1 kg Input Output S video input Y 0 8 1 2 Vp p 75 ohms C 0 2 0 4 Vp p 75 ohms S video output Y 1 0 Vp p 75 ohms C 0 3 Vp p 75 ohms Video input 0 5 2 0 Vp p 75 ohms pin jack Audio input 8 dB 50 kilohm
115. he AV mode e Slide the TV CABLE SAT DVD switch to DVD OLO DUBBING ENTER ON SCREEN High Speed Dubbing From HDD To DVD It is possible to dub the original recordings and or play lists on the HDD deck to DVD discs The dubbing is performed in high speed keeping the original transfer rate NOTES e After accessing the Dubbing Menu screen it is not possible to take out a disc e t is not possible to dub copy once titles in Video mode e When the dubbing is finished the data will be moved from HDD to DVD e When you cancel dubbing a copy once title during dubbing the original recording on the HDD deck remains and the title copied to a DVD disc is deleted e t is not possible to dub play lists which contain copy once titles Load a recordable disc 2 Press DUBBING to access the Dubbing Menu screen Press A V D to select HIGH SPEED then press ENTER Press AV lt gt to select indexes small pictures of desired original recordings and or play lists then press MARK After selecting all indexes you want to dub press ENTER You can select up to 8 original recordings and or play lists 5 Press lt gt to select EXECUTE or AUTO POWER OFF then press ENTER The dubbing screen appears for 5 seconds To display the dubbing screen again press ON SCREEN EXECUTE Select this to continue the dubbing operations AUTO POWER OFF Select this to continue the d
116. he lid The remote control can operate most of your unit s functions as well as basic functions of TV sets and satellite receivers of JVC and other brands gt pg 63 64 e Point the remote control toward the receiving window e The maximum operating distance of the remote control is about 8 m NOTE If the remote control doesn t work properly remove its batteries wait a short time replace the batteries and then try again 14 en INDEX On Screen Display DVD deck When SUPERIMPOSE is set to AUTO and ON SCREEN on the remote control is pressed various operational indicators appear on the TV screen To clear the operational indicators press ON SCREEN twice When playing back a recorded title Playback title number Playback chapter number Disc remaining time Current status playback Audio mode Current received recording channel position number On playback background Bar meter Name of title or play list currently being played back Current playback point Recorded mode 1 Live Memory mode recording kal 8 L9 0 When recording 11 35 FR360 3 Recording point Current status recording Current time Recording channel number 12 When pressing REC MODE Appears for eight seconds Disc type Current recording speed Remaining disc time for each recordi
117. hen press ENTER 5 Press I to pause playback To resume normal playback press Press B to stop playback Modify Original Information DVD DVD Audio 0 e Turn on the TV and select the AV mode e Slide the TV CABLE SAT DVD switch to DVD e Press HDD or DVD to choose the corresponding deck e Load a DVD disc to modify ATTENTION It is not possible to modify discs recorded on DVD units from other manufacturers Modify Index Press EDIT The Editing screen appears 2 DVD deck only Press AV lt gt to select MODIFY under ORIGINAL PLAY LIST then press ENTER Press AV lt I gt to select MODIFY under ORIGINAL then press ENTER Press AV lt gt to select one title you want to modify then press ENTER D Press lt gt to select INDEX 2 EDITING gt MODIFY INDEX Search for the picture from the title by pressing the appropriate buttons 4 4 gt gt gt II The INDEX pictures of the title appear on the left window 7 Confirm the arrow is on Bree a 38 REPLACE then press ENTER to a register new index New index appears on the right window e When you press ENTER with the arrow on RETURN you can return to the previous screen 8 Press EDIT to return to the normal screen Modify Title Name Pertorm steps 1 4 of Modify Index gt pg 50 before continuing 2 Press AV lt D
118. her DVD players DVD RW discs are finalised in the mode that the discs were formatted enabling playback on compatible DVD players Title names input in the Library Database Navigation are registered as title names in the DVD menu gt pg 50 e Turn on the unit e Turn on the TV and select the AV mode e Slide the TV CABLE SAT DVD switch to DVD e Load a DVD R RW disc to finalise CABLE SAT ove 9 ENTER Before finalising e is possible to record on a blank space e is possible to enter title names gt pg 50 e is possible to delete titles pg 51 e t is impossible to overwrite recorded areas of DVD R discs e Available recording capacity does not increase even if a recorded title is deleted from a DVD R disc e is impossible to record or edit DVD R RW discs recorded on other devices even if they have not been finalised After finalising For DVD R RW Video mode discs e Video and audio that have been recorded by then are recorded in conformity to the DVD Video standard enabling you to play back the discs as DVD VIDEO discs e Although DVD R RW discs finalised on this unit become playable on DVD players compatible with DVD R RW discs some discs still may not play for which JVC cannot take responsibility e Marked points marked before finalising will be deleted and titles will be divided automatically into chapters approximately eve
119. hile downloading or set up is in progress it will be interrupted be sure to turn off the unit power once and try again from the beginning e Auto Clock Set may not function properly depending on the reception condition e On this unit the characters available for station names ID are A Z 0 9 and space Some names of downloaded stations may differ from those of your TV lt pg 72 After Preset Download is completed perform Monitor Set on page 22 INITIAL SET UP gt AUTO CH SET AUTO SET T V LINK 2 LH INITIAL SET UP AUTO SET AUTO SET PLEASE WAIT CANCEL Ca o SELECT WITH THEN PRESS ENTER PRESS SET UP TO EXIT 1 EXT SELECT 20 en INITIAL SETTINGS Results Of Auto Set Up Preset Download Appearing On The Front Display Panel If both Auto Channel Set and prs p umm Auto Clock Set have been i performed successfully the correct current time is displayed Turn on the TV and select its AV mode then make sure that all necessary stations have been stored in the unit s memory by using the PR button s e f station names ID pg 85 have also been stored in the unit s memory the station name will be displayed at the top right corner of the TV screen for about 5 seconds when the unit is tuned to a different station e f you want to set the tuner manually such as to add or skip channels to change channel positions o
120. ice personnel To prevent electric shock or fire hazard DISC TRAY AND OTHER OPENINGS TO LOOK INTO THE remove the power cord from the mains outlet prior to INSIDE OF THIS UNIT connecting or disconnecting any signal lead or aerial USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE TM SPECIFIED HEREIN MAY RESULT IN HAZARDOUS 1 dts SHOWVIEW DIGITAL OUT RADIATION EXPOSURE DIGITAL DELUXE DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF e Manufactured under licence from Dolby Laboratories Dolby and REFER SERVICING TO QUALIFIED PERSONNEL double D symbol are trademarks of Dolby Laboratories e DTS and DTS Digital Out are trademarks of Digital Theater Systems Inc e SHOWVIEW is a registered trademark of Gemstar Development Corporation The SHOWVIEW system is manufactured under licence from Gemstar Development Corporation e This product incorporates copyright protection technology that is protected by method claims of certain U S patents and other intellectual property rights owned by Macrovision Corporation and other rights owners Use of this copyright protection technology must be authorized by Macrovision Corporation and is intended for home and other limited viewing users only unless otherwise authorized by Macrovision Corporation Reverse engineering or disassembly is CLASS 1 LASER PRODUCT prohibited REPRODUCTION OF LABELS WARNING LABEL INSIDE OF THE UNIT CAUTION VISIBLE
121. ie disc etc SHARP Clearer sharper edged picture when viewing images with lots of flat same coloured surfaces such as cartoons SOFT Select this option when too much noise appears To clear the on screen bar Press ON SCREEN Setting The Progressive Mode DVD DVD Audio RAM VIDEO cD You can obtain optimal picture quality by selecting whether the content on the disc is processed by field video source or by frame film source 1 Press ON SCREEN twice to access the on screen bar 2 Press lt gt to select then press ENTER The pop up window appears under the selected item TITLE 99 TRACK 99 EACH 0 00 DVD 3D ON CINEMA AUTO 1 my c C 4sc ie CI Press AV to select the desired option then press ENTER AUTO 1 Used to play a disc containing both video and film source materials This system recognizes the source type video or film of the current disc according to the disc information Normally select this option AUTO 2 Almost the same as the AUTO 1 but the processing of the scenes with movement is different Select AUTO 1 or AUTO 2 to your preference FILM Suitable for playing back a progressive scanned film source disc VIDEO Suitable for playing back a video source disc The outlines on the played back pictures will be soft To clear the on screen bar Press ON SCREEN NOTE When the progressive mode is set be sure to set L 1 OUTPUT to COMPONENT
122. if they have not been finalised e t is impossible to overwrite recorded areas of DVD R discs e Available recording capacity does not increase even if a recorded programme is deleted from a DVD R disc After finalising After a DVD R RW disc Video mode has been finalised it is possible to play back the recorded programmes video and or audio on a standard DVD video player as a DVD VIDEO disc e Edited titles are displayed as the DVD menu in video mode e t is impossible to record edit or delete the data either in video mode or in VR mode gt CONTENTS MENU a PREV 81 Sister Princess ED2 14 11 0 55 PR12 lt HDD MN26 16 11 2002 82 GALAXY ANGEL A 01 OP 06 10 9 30 PR12 lt HDD 07 10 2002 83 GALAXY ANGEL A 01 ED 06 10 9 30 PR12 lt HDD 07 10 2002 84 FISHING WORLD OP 22 12 20 00 PR3 22 12 2002 85 FISHING WORLD ED 22 12 20 00 PR3 22 12 2002 86 RALLY CAR OP 10 04 0 30 PR16 04 10 2002 87 RALLY CAR ED 10 04 0 30 PR16 04 10 2002 88 Chobits 04 OP 02 05 PR10 02 05 2002 e Either in video mode or in VR mode although the disc can be 89 Chobits 404 ED 02 05 PR10 02 05 2002 pl ayed back on DVD pl ayers from 90 Chobits 25 ED 26 09 0 00 PR10 MN32 LPCM anan other manufacturers sometimes it may not be possible to play back depending on the disc and recording conditions e t is impossible to record on CD R RW or DVD R discs used for authoring e t is impossible to record onto DVD R RW Video mode discs broadcasts that allow y
123. includes black standard 4 3 aspect bands at the top and ratio the bottom of image which has a standard 4 3 aspect ratio letter box Video playback is in Wide video mode 16 9 on wide televisions but in letter box on televisions with standard 4 3 aspect ratio Video playback is in Wide video mode 16 9 on wide televisions but pan and scan is used on televisions with standard 4 3 aspect ratio either the left or right side of the image is cut out Marks related to audio Number of audio tracks Dolby Digital mark It has been developed by Dolby Laboratories as a digital surround system D I GITAL DTS Digital Theater Systems You can enjoy DTS audio if you connect an amplifier with a built in DTS decoder to the DIGITAL OUT connector of the unit DIGITAL SURROUND Placing A Disc Opening the disc tray Press 4 to open the disc tray A T 2 CABLE SAT TV DVD D STANDBY ON CLOSE TVAV TVICAUSAT DVD VIDEO e Es e Pressing the button again closes the disc tray e Use the buttons to open and close the disc tray e Do not block the disc tray with your hand while it is opening or closing as this may result in hardware failure e Do not place unplayable discs or any object other than a disc on the disc tray e Do not press down strongly on the disc tray or place any heavy objects on it
124. ings ONCE One Time Recording In this mode a programme will not be automatically overwritten WEEKLY OVERWRITE Weekly Recording Weekly Overwrite When the set weekly programme is broadcast the programme recorded last week is automatically deleted and overwritten by the new programme This week s drama Overwritten Last week s drama MON SUN FOR A WEEK MON SAT FOR A WEEK MON FRI FOR A WEEK Daily Recording Weekly Overwrite When the set weekly programme is broadcast the programme recorded on the same day last week is automatically deleted and overwritten by the new programme n ces ied uen lad d week Overwritten Last penus MON SUN OVERWRITE MON SAT OVERWRITE MON FRI OVERWRITE Daily Recording Daily When the set daily programme is broadcast yesterday s programme is automatically deleted and overwritten by the new programme Tuesday s programme Overwritten Monday s programme For the DVD deck ONCE One Time Recording WEEKLY Weekly Recording MON SUN MON SAT MON FRI Daily Recording TIMER RECORDING 4 45 VPS PDC Recording Now available from some TV stations PDC Programme Delivery Control and VPS Video Programme System are services designed to assure safe accurate timer recording With this system special code signals are transmitted together with the audio video signals These code signals control your video unit and have precedence over the advertis
125. io Dubbing sirenen a a a 62 REMOTE CONTROL 63 Remote Control Functions 63 SYSTEM CONNECTIONS 65 Connecting A Satellite Receiver 65 Connecting To A Dolby Digital Decoder Or An Amplifier With IX EI DI Serao autora 66 SUBSIDIARY SETTINGS 67 Mode Set E IE 67 Sean Mode Gel CHR 69 SHOWVIEW System Setup sese 70 jid IE 70 COCK SOU Fe 73 Format A Disc DVD Deck Only 74 Finalise A Disc DVD Deck Only 75 PIC FUNCION deem 76 Tray Lock DVD Deck Only 76 TROUBLESHOOTING 77 SPECIFICATIONS 81 APPENDIX 82 LIST OF TERMS 86 About Discs Recordable playable Discs You can use discs with the following logos for recording and playback a SUE _ RW RAMA 7 DVD RAM DVD RW 12 cm 4 7 GB 9 4 GB Ver 1 1 1x 2x speed Video Ver 2 0 2x speed mode VR mode Ver 2 1 1x 2x speed mode e The above table is based on the information as of February 2004 e Recording and playback may not be performed depending on the characteristics and condition of the disc used leading to unsatisfactory results Using discs manufactured by JVC is recommended since they have been tested to be compatible with this unit DVD RAM
126. io of your TV is fixed to 16 9 wide TV The unit automatically SET UP adjusts the screen width of the output signal correctly when playing back a picture whose aspect ratio is 4 3 ENTER Pan amp Scan Letter Box In general DVD VIDEO disc are produced for a wide screen TV with 16 9 aspect ratio Material with this ratio will not fit to a TV with 4 3 aspect ratio There are two styles to display the image Pan amp Scan PS and Letter Box LB Pan amp Scan The right and left side of the image are cut off The image fills the screen e The picture will be shown in the 4 3LB mode depending on the disc even if the 4 3PS mode is selected Letter Box Black bands appear at the top and bottom of the image The image itself appears in 16 9 aspect ratio Satellite Receiver Control Setting Satellite receiver Satellite Controller provided suggested locations Your unit Satellite Controller provided Transmitter 21 pin SCART cable provided Back of unit L 2 IN DECODER SAT CONTROL CABLE SAT TV DVD OLO E ENTER SET UP SAT CONTROL SET 23 The following procedure is required if you receive satellite channels through a satellite receiver Approximately 20 seconds before the SHOWVIEW timer programming gt pg 44 or Manual Timer programming lt pg 46 starts the un
127. it sets its input mode L 2 and automatically switches the satellite receiver s channels using the provided Satellite Controller Installing Satellite Controller Place the Satellite Controller so that the path between its transmitter and the satellite receiver s remote sensor is unobstructed 2 Fix securely using the adhesive strip attached on the back of the Satellite Controller 3 Be sure to connect the unit s L 2 IN DECODER connector to the satellite receiver s 21 pin SCART connector NOTE When connecting your satellite receiver refer to its instruction manual Connect the Satellite Controller to the SAT CONTROL connector on the rear panel Setting Satellite Receivers Brand And Channel After installation set the satellite receivers brand and channel correctly otherwise the Satellite Controller cannot work correctly e Turn on the unit e Turn on the TV and select the AV mode e Slide the TV CABLE SAT DVD switch to DVD Turn on the satellite receivers power 2 Press SET UP to access the Main Menu screen Press lt gt to select INITIAL SET UP then press V 4 Press lt gt to select TUNER 5 INITIAL SET UP SET then press V TUNER SET CLOCK SET w 5 Press AV lt P to select SAT AUTO CH SET MANUAL CH SET CONTROL SET then press 4 eal E NT E R SAT CONTROL SET GUIDE PROG SET 6 Press Y to select
128. iver the unit may not record a slight portion of the beginning of the programme or may record slightly longer than the actual length of the programme e f you engage the Automatic Satellite Programme Recording mode when the satellite receiver s power is on the unit will not start Automatic Satellite Programme Recording even though SATO blinks on the front display panel When the satellite receiver shuts off once and is turned back on again the unit starts recording e You can also record a programme from your cable system in the same way if the system has a timer Just Clock gt pg 73 does not work when the Automatic Satellite Programme Recording mode is engaged Library Database Navigation DVD DVD Audio Tz E Ed Ed Peo ES ES ES The Library Database Navigation enables you to search and select the desired titles recorded on the HDD deck and the DVD deck very easily You can record up to 99 titles on a disc Each time a title is recorded the information of the title is registered for the Library Database Navigation automatically So you can confirm the information of the titles recorded with the Library Database Navigation screen And you can also select one of the titles recorded using the Library Database Navigation The following screen appears as the Library Database Navigation screen when you press NAVIGATION You can move the arrow to select the desired position on the screen by pressing AV lt on th
129. l as search for the beginning of each title About registration of information The following information is automatically registered for each title when ordinary recording or timer recording is performed then stored in an area specified on the unit e index reduced pictures to show programme titles e programme title e category e date and time e channel e recording mode e length of recording time The items marked with an asterisk can be easily modified and registered again after recording by using Library Database Navigation system The limitations of registration You can register information up to 99 titles for the DVD deck and 200 titles for the HDD deck When the amount of information is at the limits of registration you cannot record new titles any more In this case you need to delete old titles to register new one lt pg 51 NOTE Once a DVD R RW Video mode disc has been finalised the displays for original and play list do not appear Only display for library appears 50 en NAVIGATION Scan For Beginning Of Title e Turn on the TV and select the AV mode e Slide the TV CABLE SAT DVD switch to DVD e Press HDD or DVD to choose the corresponding deck e Load a DVD disc to scan TV LD DVD CABLE SAT HDD DVD MEMO NAVIGATION AVA ENTER CLEAR a i You can scan the beginning of the title easily with the Library Database Navigation Press NAVIGATION The
130. lass filled with cold liquid In conditions where condensation may occur disconnect the unit s power plug from the wall and keep it disconnected for a few hours to let the moisture dry then turn on the unit ATTENTION To mobile phone users Using a mobile phone in the vicinity of the unit may cause picture vibration on the TV screen or change the screen to a blue back display On placing the unit Some TVs or other appliances generate strong magnetic fields Do not place such appliances on top of the unit as it may cause picture disturbance Aen CONTENTS DISC INFORMATION ADOUL DISCS es oc eter ce eumd RE munde INDEX 10 INSTALLING YOUR NEW UNIT 17 Basic 5 5 2 Ia s t ed estas dean tenn 17 INITIAL SETTINGS 18 Sel m T 18 Preset Download ix ado e Usu dep ao ANE SO AX UE Gea 19 Language EET 21 MOMMOR SEU 22 SAT CONTROL SET 23 Satellite Receiver Control Setting 23 BASIC OPERATIONS ON DVD DECK 25 Basic Playback atu tete ceat eestor qus adu oe 25 Playback Features 26 Using The On screen Bar 30 Parental LOCK 12 52 23 qu aC opea cora pce 34 Basic Recording asec DD 35 Recording Features c eres sires eec o DR T e EE ees 36 BASIC OPERATIONS ON HDD DECK 38 5
131. live in Hungary MAGYARORSZAG Czech Republic CESKA REPUBLIKA Poland POLSKA or other countries in Eastern Europe OTHER EASTERN set the clock manually O0 O O B O 00 00 Fg CABLE SAT TV DVD y DVD ci ENTER Before starting make sure of the following e The TV aerial cable should be connected to the unit e The unit s mains power cord should be connected to a mains outlet e Turn on the TV and select the AV mode e Slide the TV CABLE SAT DVD switch to DVD 1 Press on the unit or DVD 1 on the remote control to turn on the unit The Country Set display appears on the TV screen 2 Press AV lt I gt to select your country s name then press INITIAL SET UP gt AREA SELECT ENTER The Language Set EUTSOHLAND display appears on the TV screen NOTES OTHER WESTERN e f you have selected BELGIUM or SUISSE go to step 3 e f you have selected MAGYARORSZ G CESK REPUBLIKA POLSKA or OTHER EASTERN press ENTER The Clock Set screen appears Set the clock manually lt pg 73 then go to step 4 e f you have selected any other country name go to step 4 SETUP amp ENTER SELECT WITH THEN PRESS ENTER more PRESS SET UP TO EXIT Press AV lt I gt to
132. nd data are erased It is 5 Press lt gt to select OK then SELUP SELECT WTH o THEN PRESS ENTER EXT T SELECT impossible to restore them press ENTER e Never turn off the unit or disconnect the mains power cord while NOW FORMATTING is displayed on the TV screen Format A DVD RW Disc e Turn on the unit Perform steps 1 to 3 of Format A DVD RAM Disc on the above e Turn on the TV and select the AV mode before continuing D pue atc ME 2 Press AV lt D to select FORMAT then press ENTER Press lt gt to choose VR MODE or VIDEO then press ENTER when DISC WILL BE FORMATTED appears the TV screen VR MODE To be chosen when you want to record erase or edit data on the disc repeatedly VIDEO MODE To be chosen when you want to erase all the data on the disc once played back to record new data or play back the disc on other DVD players Press lt gt to select OK then press ENTER NOTES e t is impossible to format Version 1 0 DVD RW discs in Video mode e is impossible to format DVD R discs e All the titles on a disc will be deleted once the disc is formatted even if they are protected titles pg 51 OLO CABLE SAT ENTER Finalise A Disc DVD Deck Only DVD DVD MUN Audio RAM VIDEO SVCD CD Finalising DVD R RW discs recorded on this unit makes it possible for the discs to be played back on ot
133. nel becomes dimmer OFF To dim the front display panel Blue lamp on the front display panel is turned off POWER SAVE OFF ON When this function is set to ON you can reduce the power consumption while the unit is turned off NOTES e During Power Save mode the front display panel will be turned off the Just Clock function lt gt pg 73 does not work e Power Save does not work when the unit is in the Timer mode the unit s power is turned off after timer recording or Instant Timer Recording the Automatic Satellite Programme Recording mode is engaged lt pg 48 L 2 SELECT is set to DECODER SAT VIDEO or SAT S VIDEO lt pg 61 e takes some time for the unit to complete initialisation after you turn on the unit power with WAKE UP blinking on the front display panel ON SCREEN LANGUAGE This unit offers you the choice to view on screen messages in 10 different languages Though Auto Set Up selects the language automatically gt pg 20 you can change the language setting manually as required For details refer to On screen Language gt pg 21 SUBSIDIARY SETTINGS y 69 Scan Mode Set If you connect the unit and TV with Component Video Connection lt pg 17 you can select the scan mode from two modes Interlaced scan mode which is used in the conventional TV system and Progressive scan mode which enables
134. ng speed Recording speed eo ro When pressing during recording Pen IIR 2 30 1 Recording time for Instant Timer Recording ITR mode On Screen Display HDD deck When SUPERIMPOSE is set to AUTO and ON SCREEN on the remote control is pressed various operational indicators appear on the TV screen To clear the operational indicators press ON SCREEN twice When playing back a recorded title 1 2 3 4 5 p 12 STEREO Title start 2 Current playback point 3 Title end 4 Elapsed playing time 5 Play mode 6 Current received recording channel position number On playback background Recorded title or play list number currently being played back Name of title currently being played back Time scale This title is an hour and a half long Audio mode 1 Live Memory mode recording When watching a programme on air 11 35 12 EON AIR 1 Possible start point from where Live Memory Playback can be performed 2 Possible start point from where Live Memory Recording can be performed Received channel has changed at this point Currently viewed point Time scale Current time Current received channel position number 3 ES EN EX When using Live Memory playback n 11 00 in 12 00 1 00 14 35 1 11 35 T Time
135. ng time of VPS PDC recording gt pg 45 f you connect the decoder or the satellite receiver to L 2 IN DECODER and if L 2 SELECT is set to DECODER or SAT VIDEO or SAT S VIDEO pg 61 when JUST CLOCK is set to ON pg 73 Set JUST CLOCK to OFF if you mind the noise of the fan INDEX EN 11 PCM STREAM COAXIAL IN DECODER Mains Power Cord c 17 L 1 Input Output Connector L 1 IN OUT gt pg 17 60 61 65 66 L 2 Input Decoder Connector L 2 IN DECODER gt pg 23 60 65 66 D Satellite Control Connector SAT CONTROL c pg 23 Region Number Label c pg 6 12 INDEX Front Display Panel 5 GRP VPS PDC Indicator gt pg 45 Appears when checking if the station being received transmits a VPS PDC signal Disc Type Indicator When a disc is loaded the type of the disc is indicated Disc Status Indicator When a disc is running the disc marks rotate During High Speed Search Rotate faster than normal playback During Slow Motion Rotate slower than normal playback While recording Inner red ring lights in the same way as normal playback During Instant Timer Recording ITR inner red ring slowly blinks Disc marks blink when either recording or playing back Disc marks all light Disc marks all blink While pa
136. nge of more than 110 dB with regards to its Hi Fi audio capability It is recommended that you check the maximum level if you are going to listen to the Hi Fi audio signals through a stereo amplifier A sudden surge in the input level to the speakers may damage them e Some speakers and televisions are specially shielded to prevent television interference If both are of the non shielded type do not place the speakers adjacent to the TV set as this can adversely affect the playback picture When you can t switch the audio channel of a bilingual programme When the unit is connected with a digital audio device using an optional optical cable and DIGITAL AUDIO OUT is set to DOLBY DIGITAL PCM it is not possible to switch the audio channel of a bilingual programme recorded on a DVD RAM or DVD RW VR mode disc In this case perform the following steps using the remote control to switch DIGITAL AUDIO OUT from DOLBY DIGITAL PCM to PCM ONLY pg 29 Press SET UP to access the Main Menu screen Press lt gt to select DVD VIDEO SET then press V Press lt gt to select AUDIO OUTPUT then press V Press AV to select DIGITAL AUDIO OUT then press NTER Press AV to select PCM ONLY then press ENTER pg 67 Press SET UP to complete the setting Press AUDIO to select the desired audio channel m JS cec Connecting Using A Decoder
137. o mark positions During playback press MARK at positions you want to mark e MARK appears on the TV screen You can easily locate the marked positions using ka a or gt gt when you play back the disc To delete the marked positions While paused press 1444 or PI to locate a marked position you want to delete then press MARK e Crossed MARK appears on the TV screen and the marked position is deleted NOTES e When a monaural programme changes to a stereo programme while recording a mark signal is automatically recorded e When a DVD R RW Video mode disc is finalised marked points marked before finalising will be deleted and programmes will be divided automatically into chapters approximately every 5 minutes lt pg 75 MARK 28 EN BASIC OPERATIONS ON DVD DECK CABLE SAT TV DVD y DVD 0 9 TOP MENU ENTER MENU RETURN PREVIOUS NEXT be B G DISPLAY SET UP AUDIO SUBTITLE ANGLE Checking The Time Information DVD DVD Audio FA kil E E31 E3 You can check time information of a disc on the front display panel and the TV screen Each press of DISPLAY changes the display as follows DVD RAM DVD R DVD RW During recording Clock time front display panel only Current title elapsed time Disc remaining time back to the beginning only discs before finalising e Clock time is displayed only when a recordable disc is played back During
138. ode e Slide the TV CABLE SAT DVD switch to DVD Playback Features e Turn on the unit e Turn on the TV and select the AV mode e Slide the TV CABLE SAT DVD switch to DVD e Press HDD so that the HDD lamp lights up on the unit Fall TV DVD CABLE SAT ENTER SELECT ATTENTION e t may take a few seconds to start playback This is not a malfunction e Forward reverse high speed search and other operations cannot be performed while playback is stopped Press HDD so that the HDD lamp lights up on the unit 2 Press to start playback e The Library Database Navigation also enables you to search and select the desired programmes pg 50 Press to pause playback To resume normal playback press Press to stop playback NOTE When the Library Database Navigation screen appears choose a thumbnail image of the desired title on the TV screen then press SELECT f or ENTER c pg 50 CABLE SAT TV DVD HDD 4 4 510 gt gt SLOW i a High Speed Search During playback press for forward high speed search or 4 4 for reverse high speed search e Each press of the button increases the search speed for each direction To resume normal playback
139. ollowed strictly Failure to heed the following precautions may result in damage to the unit remote control or disc 1 DO NOT place the unit in an environment prone to extreme temperatures or humidity in direct sunlight in a dusty environment in an environment where strong magnetic fields are generated on a surface that is unstable or subject to vibration 2 DO NOT block the unit s ventilation openings or holes If the ventilation openings or holes are blocked by a newspaper or cloth etc the heat may not be able to get out 3 DO NOT place heavy objects on the unit or remote control 4 DO NOT place anything which might spill on top of the unit or remote control If water or liquid is allowed to enter this equipment fire or electric shock may be caused 5 DO NOT expose the apparatus to dripping or splashing 6 DO NOT use this equipment in a bathroom or places with water Also DO NOT place any containers filled with water or liquids such as cosmetics or medicines flower vases potted plants cups etc on top of this unit 7 DO NOT place any naked flame sources such as lighted candles on the apparatus 8 AVOID violent shocks to the unit during transport SAFETY FIRST EN 3 MOISTURE CONDENSATION Moisture in the air will condense on the unit when you move it from a cold place to a warm place or under extremely humid conditions just as water droplets form on the surface of a g
140. ome of them is poor You can delete those stations with an unacceptable picture from the list pg 72 Delete A Channel NOTES e Fine tuning is performed automatically during Auto Channel Set If you want to perform tuning manually refer to Fine Tuning Channels Already Stored pg 72 e f you perform Auto Channel Set when the aerial cable is not connected properly SCAN COMPLETED NO SIGNAL appears on the TV screen in step 8 In such a case make sure of the aerial connection and press ENTER Auto Channel Set will start again e f no sound accompanies the picture or the audio sounds unnatural on some channels that have been stored by Auto Set Up the TV system setting for those channels may be incorrect Select the appropriate TV system for those channels lt pg 72 INFORMATION SUBSIDIARY SETTINGS 74 Manual Channel Set Store channels that were not stored during Auto Set Up gt pg 18 Preset Download gt pg 19 or Auto Channel Set lt pg 70 Press SET UP to access the Main Menu screen 2 Press lt gt to select INITIAL SET UP then press V Press lt gt to select TUNER SET then press V Press AV lt I gt to select MANUAL CH then press ENTER The Manual Channel Set screen appears 5 Press lt D to select EDIT then press ENTER Press AV lt I gt to selecta blank position in which you want to Example To store in position 12
141. on AUDIO gt pg 29 Subtitle Button SUBTITLE c pg 28 TV CABLE SAT DVD switch 21 DVD Standby On Button DVD 6 TV CBL SAT Standby On Button TV CBL SAT rs pg 63 DVD Button c pg 25 TV Volume Buttons TV1 c pg 63 6 Programme Buttons PR c pg 35 63 Memo Button MEMO c pg 50 53 Mark Button MARK c pg 27 Programming Button PROGRAMME c pg 44 46 47 Edit Button EDIT pg 50 Navigation Button NAVIGATION c pg 49 Enter Button ENTER c pg 21 Return Button RETURN c pg 29 44 Forward Skip Button gt l gt pg 26 42 43 Next Button NEXT c pg 29 Forward Search Button gt gt pg 26 42 Forward Slow Button SLOW c pg 27 Play Button Be gt pg 25 40 Select Button SELECT c pg 25 50 Pause Button gt pg 25 40 Stop Button W gt pg 25 40 Clear Button CLEAR c pg 31 44 Skip Search Button c pg 27 42 D Help Button c pg 76 D One Touch Replay Button S c pg 42 D On Screen Button ON SCREEN c pg 14 30 B Set Up Button SET UP c pg 21 D Progressive Scan Button PROGRESSIVE SCAN rs pg 69 9 Angle Button ANGLE DVD deck only c 28 Live Check Button LIVE CHECK c pg 42 How To Use Before use insert two R6 size batteries into the remote control with the polarity and matched correctly as indicated on the battery compartment or on t
142. ont display panel Press on the remote control to change the unit s code The code currently set on the remote control blinks on the front display panel for approximately 5 seconds and is applied to the unit NOTE When POWER SAVE is set to ON pg 69 it is not possible to change the remote code REMOTE CONTROL 63 TV AV VIDEO CABLE SAT TV DVD TV 0 ENTER 0 oonga o od E eof 9 B 0 SET UP TV Multi Brand Remote Control Your remote control can operate the basic functions of your TV set In addition to JVC TVs other manufacturer s TVs can also be controlled e Turn off the TV using its remote control e Slide the TV CABLE SAT DVD switch to TV IMPORTANT Although the provided remote control unit is compatible with JVC televisions as well as many other models it may not work with your TV or in some instances may have limited function capability e Keep pressing SET UP down during step 1 Enter your TV s brand code using the number keys then press ENTER 2 Press 0 on the units remote control to turn on the TV and try operations c step 3 e Once you have set the remote control to operate the TV you do not have to repeat this step until you replace your remote control s batteries e Some brands of TVs have more than one code If the TV does not function with one code try entering another 3 Press the corr
143. or pause playback by pressing the following buttons on the remote control gt gt B 11 e To play back in slow speed 1 10 of the normal speed press to pause playback then press 4 4 or BP e To play back frame by frame press IM to pause playback then press Il repeatedly Each press of advances a frame e To change the playback direction press 4 4 PP 8 Press lt I gt to select Ei then press ENTER The dubbing starts e Playback on the external DV equipment and recording on the unit should start simultaneously To pause dubbing press lt gt to select 2 then press ENTER Both the unit and the external DV equipment pause dubbing Pressing on the unit also works the same way 9 Press the remote control to stop dubbing e Both the unit and the external DV equipment stop dubbing NOTES e Dubbing copyright guarded programmes is not possible e Original DV informations such as the recording date and time are not recorded e The superimposed indication during the operation or dubbing is not recorded e f the dubbing is paused while the channel is set to DV you cannot switch channels When you dub from DV equipment other than a camcorder Perform step 1 to 2 Locate the point from where you want to start dubbing then stop on the DV equipment e f you pause the DV equipment in this step a few second s still picture will be recorded at the
144. ou encounter problems while operating this unit e Turn on the unit e Turn on the TV and select the AV mode e Slide the TV CABLE SAT DVD switch to DVD TV DVD olo CABLE SAT AV ENTER 44 PREVIOUS Press to access the help screen e An INDEX screen that contains the most common needed topics headings relating to the current status appears Topics with the icon refer to HDD deck operations and with the icon refer to those for the DVD deck 2 Press AV to search for the item that describes the solution to your problem then press ENTER e The selected help page appears e You can also browse help pages by pressing AV e To return to a previous page press RETURN 3 Press to return to the normal screen NOTE You cannot perform playback recording timer recording or other normal operations while accessing the help screen Tray Lock DVD Deck Only You can lock the disc tray to prohibit the unwanted disc ejection by children e Turn off the unit I To lock tray While the unit is turned off press and hold Bil then press amp on the unit LOCKED appears on the front display panel and the disc tray is locked To unlock tray While the unit is turned off press and hold then press amp on the unit
145. ou to copy once The copy once programmes can only be recorded onto DVD RW discs formatted in VR mode NOTE The following may result if you play back a DVD R disc recorded on another unit e The disc does not play A mosaic pattern block noise appears on the screen e Video or audio may be dropped out e The unit stops during playback 6 DISC INFORMATION Discs For Playback Only You can use discs with the following logos for playback only DVD DVD VIDEO EE VIDEO Video CD Super Video CD Gist DIGITAL VIDEO VIDEO SUPER VIDEO VIDEO example of region code indications 273 405 HEE VIDEO CD VIDEO CD R CD DA JPEG Audio CD al COMPACT MP3 files CD DA files ISG Recordable CD RW COMPACT CD DA JPEG files e Playback may not be performed depending on the characteristics and condition of the disc used e DTS Audio CDs can also be played back An optional DTS decoder is required e and JPEG discs can be played back on this unit only when they have been recorded in the ISO9660 or Joliet format and finalised OS DIGITAL AUDIO GSK ReWritable CD ROM JPEG MP3 files e JPEG files that can be played back on this unit must conform to JFIF Baseline process and the maximum resolution of a JPEG file is 3 840 x 2 160 pixels e CD R RW discs recorded in music CD format need to be finalised to play back on this unit e Operation and au
146. perly gt 48 On the front display panel appears e Power failure occurred Set date and time correctly gt pg 73 PROGRAMME FULL appears on the TV screen during timer programming e 32 programmes have already been timer programmed Clear unnecessary programmes on the unit then try timer programming again gt pg 47 The disc space does increase when recorded titles are cleared e The PC s data recorded on a DVD RAM drive cannot be cleared on this unit Format the disc When the disc is soiled wipe the disc with a soft dry cloth before formatting gt pg 9 74 Other Problems The image of the TV broadcast appears distorted on the TV screen For basic S video connection Press PROGRESSIVE SCAN for 3 or more seconds so that the Video output indicator lights off on the front display panel For component video connection Press PROGRESSIVE SCAN for or more seconds so that the Video output indicator 3 lights up on the front display panel Whistling howling is heard during camcorder recording e he camcorders microphone is too close to the TV Position the camcorder so its microphone is away from the TV e The TV s volume is too high Turn the TV s volume down When scanning channels some of them are skipped over e Those channels have been designated to be skipped f you n
147. play press ENTER In addition the angle selection display disappears automatically if no operation is done for 10 seconds Subtitle Selection ES ER Some DVD VIDEO discs contain more than one subtitle language from among which you can choose the desired subtitle language Ke appears on the TV screen at the beginning of the part where more than one subtitle language are recorded Press SUBTITLE during playback The subtitle selection display appears on the TV screen e Each time you press SUBTITLE the subtitle display is switched on and off 2 Press lt I gt to select your desired language To clear the subtitle selection display press ENTER NOTES e When appears on the TV screen no subtitle language is recorded e When the subtitle language won t be changed with the procedure above change the subtitle on a disc menu displayed by pressing MENU EX 4123 When 3 scene angles are contained 4128 D ENGLISH When 3 subtitle languages are contained Audio Language Sound Selection ES Some DVD VIDEO discs contain the multiple audio language sound You can select the desired audio language or sound For some Video CD SVCD discs you can switch the audio channel to choose Karaoke either with or without the vocal Press AUDIO during playback The Audio Language Sound selection display appears 2 Press AUDIO or lt
148. quality component video pictures e f your TV is not stereo capable use the units AUDIO OUT connectors to connect to an audio amplifier for Hi Fi stereo sound reproduction e By using the component video connection you can view the images in the progressive mode For switching to the progressive mode refer to Scan Mode Set pg 69 NOTE Select an appropriate option of L 1 OUTPUT as follows pg 61 When your TV s SCART i oan Composite signals SCART VIDEO Y C signal separated luminance brightness and chrominance colour signals RGB signal SCART RGB Component video signal COMPONENT 4 Plug the end of the mains power cord into a mains outlet LOADING blinks on the front display panel when the AC plug of the mains power cord is connected into a mains outlet and it takes approximately 50 seconds for the unit to be turned on This is not a malfunction eo SCART S VIDEO 18 En INITIAL SETTINGS Auto Set Up Auto Channel Set Auto Clock Set Auto Guide Program Number Set After the button on the unit or DVD on the remote control is pressed for the first time to turn on the unit by simply selecting your country the Auto Set Up function sets the tuner channels clock and Guide Program numbers automatically f you live in Belgium BELGIUM or Switzerland SUISSE you also need to select your language If you
149. r to set or change station names see pages 71 72 If Auto Channel Set has mrs E MM succeeded but Auto Clock Set has not PR 1 channel position is displayed OR If both Auto Channel Set and Auto Clock Set have failed is displayed 1 Turn on the TV and select its AV mode then make sure that all necessary stations have been stored in the unit s memory by using the PR button s e f station names ID gt pg 85 have also been stored in the unit s memory the station name will be displayed at the top right corner of the TV screen for about 5 seconds when the unit is tuned to a different station e f you want to set the tuner manually such as to add or skip channels to change channel positions or to set or change station names see pages 71 72 2 Perform Clock Set on page 73 ATTENTION After making sure the cables are connected properly turn off the unit s power once then turn the unit s power back on again The Country Set display appears on the TV screen perform Auto Set Up on page 18 or Preset Download on page 19 again IMPORTANT e To check if the Guide Program numbers have been set correctly perform the SHOWVIEW Timer Programming lt pg 44 e n certain reception conditions station names may not be stored correctly and auto Guide Program Number Set may not work properly If the Guide Program numbers are not set properly when you timer record a TV
150. ramble the signal with the decoder connected to the satellite receiver e For details refer to the instruction manual of the satellite receiver and decoder Outdoor unit Aerial Satellite cable TV aerial cable ANTENNA IN m mi s ANTENNA OUT 66 en SYSTEM CONNECTIONS Connecting To Dolby Digital Decoder Or An Amplifier With Built in DTS These instructions enable you to connect your unit to a Dolby Digital decoder or an amplifier with built in DTS Coaxial cable not provided DIGITAL OUT COAXIAL Dolby Digital Decoder or amplifier with built in DTS To DIGITAL AUDIO input Optical cable not provided DIGITAL OUT OPTICAL Note for connection Remove the protection cap from the cable 1 Connect the unit and Dolby Digital decoder or an amplifier with built in DTS using either an optional optical cable or an optional coaxial cable NOTES e For Dolby Digital sound set DIGITAL AUDIO OUT to DOLBY DIGITAL PCM lt pg 67 e For DTS sound set DIGITAL AUDIO OUT to STREAM PCM pg 67 CAUTIONS e This unit has a dynamic ra
151. rated States of fea eea FO 5 s Bahamas FR EN x Bowetisiand GA ew Botwwana oe United Kingdom ___ LN CA e CF Belarus D Grenada Korea Democratic People s Republic of H Ghana dK Comoros Saint Kitts and Nevis EC EE EG EH ES ET FI FJ FK FM FO FR FX GA GB G G G Cocos Keeling Islands G Ghana Y Cayman Islands Central African Republic Gibraltar KZ Kazakhstan KZ Congo GL Greenland LA Lao People s Democratic Hepublic E Cote d lvoire BB BE B BG BH BJ BN BS BT BV BW BY BZ CA CC CF 84 en APPENDIX Liechtenstein om ome wo Ww _ ei PA fe Frere Souten Tortores _ umma PF TM Wed _ Moe PM To wp en Wwe ooo D ooo LN Wm NU Z PA PE PF PG Russian Federation United States Minor Outlying Islands Vatican City State Holy See SE Martinique Saint Vincent and the Grenadines APPENDIX 85 TV Station And ID List The ID abbreviation is what is shown on screen in lieu of the station name The ID abbreviation is listed in the Confirmation screen and is displayed on the TV screen when the unit is tuned to a different station ID STATION NAME ID STATION NAME ID STATION NAME TV1000
152. reproduction of higher quality images B Interlaced scan In the conventional video system a picture is shown on the display monitor in two halves The Interlaced scan system places lines of the second half of the picture in between lines of the first half of the picture Progressive scan Progressive scan displays all the horizontal lines of a picture at one time as a single frame This system can convert the interlaced video from DVD into progressive format for connection to a progressive display It dramatically increases the vertical resolution ATTENTION Your TV needs to be compatible with PAL Progressive e Turn on the unit e Turn on the TV and select the AV mode e Slide the TV CABLE SAT DVD switch to DVD v e e olo gt CABLE SAT PROGRESSIVE SCAN Press PROGRESSIVE SCAN for 3 or more seconds e Video output indicator lights on the front display panel if Progressive scan mode has been established pg 12 e Each press of PROGRESSIVE SCAN for 3 or more seconds switches the scan mode NOTES e When the progressive mode is set be sure to set L 1 OUTPUT to COMPONENT pg 61 Progressive scan is output only from COMPONENT VIDEO OUT connector e Interlaced scan mode is the setting at your purchase e Interlaced scan mode might be suitable depending on video material e Scan mode cannot be set while menu screen is displayed e When Progre
153. rol code is inappropriate Load a playable disc on the unit gt pg 5 Set the same remote control code 1 2 3 or 4 on both the unit A dirty disc is loaded and the remote control gt pg 63 Clean the disc pg 9 e The batteries are discharged e Defective disc is loaded Replace the dead batteries with new ones Replace the warped or scratched disc with a normal one Dubbing from the external equipment is not possible Images are blurred or distorted when you start High Speed e The source another video recorder camcorder has not been cn properly connected Images are blurred or distorted at the point where the playback Confirm that the source is properly connected speed changes and this is not a malfunction of the unit e All necessary power switches have not been turned on Confirm that all units power switches are turned on e The setting of the input channel position is inappropriate Playback does not start for approximately 30 seconds after Select the input channel position F 1 L 1 or L 2 that recording is stopped and this is not a malfunction of the unit corresponds to the input terminal connected to the external equipment gt pg 60 Playback does start when you select a title chapter e The Parental Lock is engaged and the disc is rated higher than The on screen display superimposed programme played the set level
154. rrives for the next timer programme e t is impossible to perform ITR even if you press 6 during Live Memory Playback lt pg 39 Press to display the programme being recorded then perform ITR settings e Playback may be paused for a moment during Live Memory Playback which does not interfere with recording e Live Memory Playback cannot be performed while recording the source from DV input lt pg 58 DV Dubbing e When LIVE CHECK is pressed to display the picture currently being recorded the picture size may not be correct e Press or LIVE to stop Live Memory Playback 42 py BASIC OPERATIONS ON HDD DECK ee nr Returns to on air programme screen When a confirmation message appears by pressing this button during timer e Turn on the unit programming or title editing etc follow the instruction to return to e Turn on the TV and select the AV mode the previous screen e Slide the TV CABLE SAT DVD switch to DVD e Press HDD so that the HDD lamp lights up on the unit NAVIGATION Displays Library Database Navigation menu You can choose a title CABLE SAT to play back TV DVD gt e Each press of the button during playback advances the playback speed in 5 steps for reverse direction Available only when paused e Each press of the button reverses the still picture frame by frame e Pressing down for 2 or more seconds reverses playback at 1 16 times the normal speed Then each press o
155. ry 5 minutes pg 27 e Depending on the DVD players and DVD R RW discs used and on the conditions of recording it may not be possible to play back the discs In this case play back the discs on this unit e Additional recordings become impossible SUBSIDIARY SETTINGS 75 Finalise A DVD R RW Disc Perform steps 1 to of Format A DVD RAM Disc c pg 74 before continuing 2 Press AV lt D to select FINALIZE then press ENTER Press lt gt to select then press ENTER Press lt I gt to select OK then press ENTER 4 Press SET UP to return to the normal screen e Menu screen is cleared e Once a DVD R RW Video mode disc has been finalised the displays for original and play list do not appear Only display for library appears e Once a DVD RW VR mode disc has been finalised it can be played on DVD players compatible with VR mode Cancel The Finalisation Of A DVD RW Disc 1 Load a DVD RW disc to cancel the disc finalisation and perform steps 1 to of Format A DVD RAM Disc pg 74 before continuing 2 Press AV lt D to select CANC FINALIZ then press ENTER Press lt I gt to select OK then press ENTER 4 Press SET UP to return to the normal screen e When the disc finalisation is cancelled the mode in which the disc was formatted is restored making the disc recordable pg 7 74 76 SUBSIDIARY SETTINGS Help Function Use this function if y
156. s pin jack Corresponding to mono left Audio output 8 dB 1 kilohms pin jack i Link 4 pin for DV input Component video output Y 1 0 Vp p 75 ohms CB CR PB PR 0 7 Vp p 75 ohms Corresponding to copy protection Digital audio output Optical 18 dBm 660 nm Coaxial 0 7 Vp p 75 ohms Corresponding to Dolby Digital and DTS Digital Surround Bit stream Selectable in digital audio output setting menu RCA connectors IN x 1 OUT x 1 VIDEO AUDIO DVD Deck Recording time Maximum 8 hours with 4 7 GB disc XP Approx 1 hour SP Approx 2 hours LP Approx 4 hours EP Approx 6 hours FR Approx 1 hour 8 hours Audio recording system Dolby Digital 2 ch Linear PCM XP mode only Video recording compression system MPEG2 CBR VBR SPECIFICATIONS Ey 81 VIDEO AUDIO HDD Deck Video recording compression system MPEG2 VBR Audio recording system Dolby Digital 2 ch Linear PCM XP mode only Recording time Maximum 204 hours XP Approx 34 hours SP Approx 68 hours LP Approx 136 hours EP Approx 204 hours FR Approx 1 8 hours TUNER TIMER Signal system PAL type colour signal and CCIR monochrome signal 625 lines 50 fields TV channel storage capacity 99 positions AUX position Tuning system Frequency synthesized tuner Channel coverage VHF 47 MHz 89 MHz 104 MHz 300 MHz 302 MHz 470 MHz UHF 470 MHz 862 MHz Memory backup time Approx 60
157. s To Play Back Again Later 27 Menu Audio Subtitle Language Set 21 One Touch Replay i ii Re eie ues 29 43 On screen 30 On screen Language 21 P iia ae rufo edis 22 Play 52 Playback Control PBC 29 Programme Playback 33 Progressive SCAN utei uate Rees 69 R Random Playback 33 Recordable playable discs 5 Recording Medium And Format 7 Recording 35 38 Recording Resume Function 35 38 HeglorbNUmbBl A seu ER seca d EE 6 Register DISO P M LU EM M Ud 54 Relief Recording s sider a N 46 Repeat Playback ti ce qus 31 Resume FUNCION 27 S Select The Switching Interval Of The Slide Show 33 Setting The Progressive Mode 33 Simulated Surround Effect 32 SRIDASOSICIT eur 27 40 SIOW MOTION
158. s back the stop time in 1 min increments e To advance go back the stop time in 30 min increments press and hold AV 8 Press AV to select TV PROG then press ENTER Press AV to select the desired channel Press AV to select CONFIRM then press ENTER 10 Set the other recording options as required e Refer to step 8 in SHOWVIEW Timer Programming lt pg 44 1 1 Press AV to select then press ENTER to access the Programme Confirmation screen 12 Press lt gt to select EXIT then press ENTER to complete timer programming e To programme another timer press lt gt to select CONTINUE then press ENTER e f PROGRAMME OVERLAPPED appears on the TV screen see page 47 NOTES e When two successive programmes are recorded on a DVD RW disc with Manual Timer Programming function the beginning of the second one may be left off the recording e f the copy limited programme is received during timer recording the unit enters Record Pause mode Recording starts again if it is switched to a recordable broadcast during the time you programmed Hj PROGRAMME gt CALENDAR PR 3 3 14 01 04 WED 22 30 23 00 BBC GARDENING EDUCATION FR360 1 00 28 00 ES PUT TITLE GARDENING THEN PRESS ENTER CATEGORY TT PRESS PROGRAMME OFF TO EXIT WEEKLY DAILY MON FRI FOR A WEEK REC MODE FR360 x PROGRAIINE am ENTER EXIT sp ECT Sat
159. s recording by the signals input from the satellite receiver After recording the unit s power shuts off automatically ATTENTION e Be sure not to turn on the satellite receiver before the programme is executed otherwise the unit will start recording when the satellite receiver s power is turned on e f you have connected another appliance other than a satellite receiver to the L 2 IN DECODER connector be sure not to engage the Automatic Satellite Programme Recording mode otherwise the unit will start recording when the connected appliance s power is turned on e Automatic Satellite Programme Recording and timer recording cannot be done at the same time HDD DVD JVC B B 9 REC MODE SATO e Make sure the satellite receiver is connected to the unit s L 2 IN DECODER connector e Programme the timer on the satellite receiver e Slide the TV CABLE SAT DVD switch to DVD Press HDD or DVD to choose the recording deck 2 Set 1 2 SELECT to SAT VIDEO or SAT S VIDEO pg 61 e Also refer to IMPORTANT on page 65 3 Press REC MODE repeatedly to set the recording mode 4 Press and hold SATO for about 2 seconds to engage the Automatic Satellite Programme Recording mode
160. scale for Temporary Recording Current Temporary Recording point Current time Current playback channel position number Time scale for Live Memory Playback Current playback point Live Memory playback mode Current playback time INDEX 15 When recording FR360 Live Memory Recording point Live Memory Recording mode 11 35 12 11 33 When pressing REC MODE Appears for eight seconds 7 001 BS 10 00 SP ES 20 00 LP ES 28 00 EP 36 00 4 8480 gt HDD capacity graph Current recording speed Remaining HDD time for each recording speed Recording speed When pressing 6 during recording 1 ITR 2 30 1 Recording time for Instant Timer Recording mode 16 EN INDEX On Screen Display DV Dubbing When capturing images from the external DV equipment 1 2 c 18 JVC GR DV3500 11 Recording speed HDD capacity graph HDD time counter Recording time scale HDD mode Remote control mode Connected DV equipment mode Connected DV equipment model information Input channel Sound mode Sound input bit rate Indicates the sound bit rate of the connected DV equipment Connected DV equipment information Maker name an
161. screen BASIC OPERATIONS ON HDD DECK 1 5x Speed Search You can play back a title quickly without disrupting the soundtrack This feature can also be performed with normal playback 1 Press 4 4 to locate the point to start 1 5x speed search from 2 Press to resume playback Press gt once e Pressing ON SCREEN displays X1 5 on the top right corner of the Screen Jump Search You can locate a scene ahead or behind the current one by jumping scenes according to selected time intervals gt pg 68 during playback or Live Memory Playback This feature is also available during recording or Live Memory Recording or when watching a TV received programme Press JUMP or JUMP 4 To advance forward or back press JUMP or JUMP repeatedly within 5 seconds of each press to continue jump e When you cannot advance any farther beginning or end of programme reached the message UNABLE TO GO BACK ANYMORE appears on the screen and the on air screen resumes In such a case press Hda 4 4 or E Example 1 Playback search when jump interval is set to 30 MIN jumps Time counter 0 min 40 min 1 h 15 min 30 min 1h Beginning of Current scene End of programme programme Example 2 Recording search when jump interval is set to 15 MIN jumps Clock time 9 00 9 40 10 15 Current scene Beginning of programme End of programme 44 en TIMER RECORDING Showview Timer Programming You
162. select the language of your choice then press ENTER The AUTO SET T V LINK display appears on the TV screen INITIAL SET UP gt LANGUAGE SELECT RETURN SETUP amp ENTER 2 amp SELECT WITH THEN PRESS ENTER PRESS SET UP TO EXIT EXT SELECT 4 Press lt gt to select AUTO SET then press ENTER The AUTO SET screen will appear INITIAL SET UP gt AUTO CH SET 4 pa J R SETUP _ amp ENTER a SELECT WITH 4 THEN PRESS ENTER ATTE NTION EXIT S FRESS eer EOE AUTO blinks on the front display panel do NOT press any button on the unit or remote control until the front display panel shows as illustrated on page 20 e When you have connected the unit to a TV offering T V Link via a fully wired 21 pin SCART cable gt pg 17 and the TV is turned on the unit automatically performs the Preset Download pg 19 even if you select AUTO SET for Auto Set Up function INITIAL SET UP gt AUTO SET AUTO SET PLEASE WAIT CANCEL SETUP SELECT WITH THEN PRESS ENTER PRESS SET UP TO EXIT 1 EXIT SELECT ATTENTION Once you have performed Auto Set Up even if the unit s memory backup has expired all the stored stations and their Guide Program numbers remain in the unit s memory and the unit will not perform Auto Set Up again The unit only performs Auto
163. select the desired date then press ENTER Cancel And Change Programmes e Repeat steps in Check Programmes to select a programme before proceeding To cancel the programme 1 Press AV lt P to select CANCEL then press ENTER To modify the programme settings 1 Press AV lt P to select MODIFY then press ENTER 2 Change the settings of the desired recording options as required e Refer to steps 4 12 in Manual Timer Programming pg 46 To skip the weekly daily programmes to the next week day It is easy to temporarily cancel weekly daily programmes of a week day 1 Press gt to select PROGRAMME SKIP then press ENTER 2 Press lt gt to select SKIP then press ENTER twice To save the titles of weekly daily programmes HDD Deck Only Use this function to avoid overwriting titles of weekly daily programmes of a previous week day 1 Press V gt to select TITLE SAVE then press ENTER 2 Press lt gt to select SAVE then press ENTER twice NOTE This function is available only when the remaining capacity of the hard disc is sufficient 48 en RECORDING Automatic Satellite Programme Recording This function allows you to automatically record a satellite programme which is timer programmed on your external satellite receiver Connect a satellite receiver to the unit s L 2 IN DECODER connector and programme the timer on the satellite receiver The unit starts or stop
164. selection of the programme Pressing 1 returns to the beginning of the current selection To clear the on screen bar and the contents of the programme Press ON SCREEN To cancel Programme Playback Press lt gt to select PRGM then press ENTER NOTE Programme Playback is not possible depending on the type of disc Random Playback DVD DVD Audio RAM VIDEO CD You can play back all the tracks on the disc in random order While stopped 1 Press ON SCREEN twice to access the on screen bar 2 Press lt gt to select RND then press ENTER Playback starts in random order TRACK 99 EACH 0 00 m To clear the on screen bar Press ON SCREEN To cancel Random Playback Perform steps 1 and 2 NOTE The same track will not be played back more than once during Random Playback Select The Switching Interval Of The Slide Show DVD DVD Audio RAM VIDEO CD You can control the switching interval of the slide show Press ON SCREEN twice to access the on screen bar 2 Press lt gt to select Elly then press ENTER The pop up window appears under the selected item GROUP 99 TRACK 99 EACH 179 59 5 SEC CINEMA Press AV to select the desired option then press ENTER e Each time you press AV the interval changes as follows 5 SEC 10 SEC 15 SEC 20 SEC 25 SEC 30 SEC Back to the beginning To clear the on screen bar Press ON SCREEN 34 EN BASIC OPERATIONS O
165. ssive scan mode is engaged no video signal is output from S VIDEO OUT connector and L 1 IN OUT connector 70 SUBSIDIARY SETTINGS SHowView System Setup IMPORTANT Normally Auto Set Up pg 18 Preset Download lt pg 19 or Auto Channel Set pg 70 sets the Guide Program numbers automatically You need to set the Guide Program numbers manually only in the following cases e When timer programming with the SHOWVIEW system the channel position where the station you wish to record is received on your unit is not selected OR when you add a channel after Auto Set Up Preset Download or Auto Channel Set has taken place Set the Guide Program number for that station manually When you wish to timer record a satellite programme with the SHOWVIEW system Set the Guide Program numbers for all satellite broadcasts received on your satellite receiver e Turn on the unit e Turn on the TV and select the AV mode e Slide the TV CABLE SAT DVD switch to DVD Guide Program Number Set Press SET UP to access the Main Menu screen 2 Press lt to select INITIAL SET then press V 3 Press lt gt to select TUNER DVD VIDEO SET UP HDD DVD SET UP FUNCTION SET UP INITIAL SET UP SET then press V TUNER SET CLOCK SET X Press AV lt I gt to select GUIDE PROG SET then press ENTER SAT CONTROL SET GUIDE PROG SET SETUP ENTER SELECT WITH 4 THEN
166. t is activated pg 32 e The effect of NORMAL and WIDE RANGE may not be different depending on discs OUTPUT LEVEL STANDARD LOW You can lower the output level of analog audio to accommodate the unit to the connected A V equipment STANDARD Normally select this setting LOW The output level of analog audio is lowered 68 en SUBSIDIARY SETTINGS DISC PLAY SET UP RESUME OFF ON DISC RESUME When this function is set to or DISC RESUME you can use the resume function gt pg 27 OFF You cannot use the resume function ON You can start playback from the resume point of the placed disc DISC RESUME The unit retains a memory of the resume points of the last 30 discs played back even though they have been ejected NOTE DISC RESUME setting works on DVD VIDEO VCD SVCD and already finalised DVD R DVD RW video mode discs For other types of discs the function under ON setting will be applied even if RESUME is set to DISC RESUME HDD SET UP B LIVE MEMORY OFF 30 MIN 1 HR 3 HR When this function is set to 30 MIN 1 HR or 3 you can apply the selected time length to Temporary recording for Live Memory gt pg 41 DVD SET UP SAVE AS LIBRARY OFF ON When this function is set to ON the recording information is automatically stored in the library For details refer to Modify Library Information gt pg 54 i C
167. t of the disc between point A and B is played repeatedly TITLE 99 TRACK 99 EACH 0 00 DVD 3D ON CINEMA AUTO 1 we res A 1 25 58 B 1 40 00 BASIC OPERATIONS ON DVD DECK 31 To clear the on screen bar Press ON SCREEN To cancel A B Repeat Playback Press lt gt to select A B then press ENTER NOTES e A B Repeat Playback may not work properly depending on the type of disc being used e The subtitles recorded around the A B point may not appear e When the end of the item is reached before the end point is set the on screen bar disappears from the TV screen In such a case repeat the procedure from step 1 e The point B must be set at least 3 seconds after the point A e When playing back a DVD A B Repeat Playback is possible only within the same title e A B C D cannot be selected during Programme and Random Playback e A B D cannot be selected while stopped Locating The Beginning Of A Desired Selection E2 EHE EI ES E3 Es EL EZ RAM VIDEO CD You can locate the beginning of a title chapter group or track During playback or while stopped Press ON SCREEN twice to access the on screen bar 2 Press lt gt to select BM then press ENTER Press V to select the desired item then press ENTER e Skip this step for Video CD SVCD and Audio CD For DVD RAM RW R DVD VIDEO TITLE SEARCH or CHAPTER SEARCH is selectable TITLE SEARCH
168. tarting the MP3 JPEG Navigation Files are automatically grouped as follows and displayed on the MP3 JPEG Navigation screen Data is displayed in the alphabetical order of file name Files are grouped based on roots Root file 1 mp3 file 2 mp3 file 4 mp3 file 5 mp3 file 6 mp3 file 7 jpeg file 8 jpeg France file 9 jpeg e This unit can recognise up to 9 hierarchies including directories and files Also it can recognise up to 250 files in each group and up to 99 groups on a disc NOTES e Video CD SVCD discs that support Playback Control PBC The contents of a disc are recorded into several hierarchies and played back according to the instructions on the screen while navigating through the hierarchies It is also possible to playback recorded tracks consecutively without activating the PBC function even when playing a PBC compatible disc pg 29 e Regarding the contents recorded on discs Some files may not be played back depending on the file types and other factors 8 DISC INFORMATION DVD VIDEO Marks Sometimes marks are printed on a DVD disc and or on its packaging to indicate information regarding the contents and functions of the disc Check the marks indicating the contents and functions of the disc Note however that in some cases a disc may not include a mark even for a function it supports Marks related to video Number of subtitles Number of angles Recorded under the Screen
169. te receiver PR number keys e For some brands of satellite receivers you must press ENTER after having pressed the number keys e The number keys may not function with some satellite receivers BRAND NAME CODE JVC 73 60 61 62 63 92 AMSTRAD CANAL SATELLITE CANAL D BOX ECHOSTAR VIA DIGITAL FINLUX FORCE GALAXIS GRUNDIG HIRSCHMANN HUMAX ITT NOKIA KATHREIN LUXOR MASCOM MASPRO NOKIA PACE PANASONIC PHILIPS RADIX RFT SABA SAGEM SALORA SAMSUNG SIEMENS SKYMASTER TECHNISAT THOMSON TPS TRIAX WISI Connecting To A Satellite Receiver Simple Connections This is an example of a simple connection if your TV has one 21 pin AV input SCART connector Connect the satellite receiver to the L 2 IN DECODER connector then connect the L 1 IN OUT connector to the TV s connector NOTES e Set L 2 SELECT to VIDEO or S VIDEO pg 61 You can use the Automatic Satellite Programme Recording function gt pg 48 with this connection e To record a programme via the satellite receiver select L 2 mode by pressing PR so that L 2 appears on the front display panel e For details refer to the instruction manual of the satellite receiver Outdoor unit Aerial Satellite cable TV aerial cable Satellite receiver h ANTENNA IN ANTENNA OUT
170. to select NAME then press ENTER Press AV lt I gt to select the desired letter or command then FH WORLD press ENTER Repeat this process to complete the name To correct a letter press AV gt to select DELETE then press EEEE ENTER gt ON REMOTE AC EDITING gt MODIFY NAME EDIT ENTER em ome e You can enter the letters up to 64 ECTS Press AV lt I gt to select SAVE then press ENTER 5 Press EDIT to return to the normal screen Modify Category Perform steps 1 4 of Modify Index pg 50 before continuing 2 Press AV lt D to select CATEGORY then press ENTER Press AV lt I gt to select the desired category then press ENTER 4 Press EDIT to return to the normal screen PRES zx EDITING gt MODIFY CATEGORY E P 0026 FISH WORLD 364 MIN 25 12 03 THU 10 00 10 15 PR 3 FROG WORLD HOBBY MOVIE MUSIC DRAMA SLT WT THEN PRESS ENTER ANIMATION SPORTS DOCUMENTARY Maer L NEWS y WEATHER 52 zr HOBBY d EXIT lt SELECT Protect Title DVD deck only You can protect titles to pre
171. tton 6 gt pg 35 38 HDD Button c pg 38 DVD Button gt pg 25 Standby On Button 0 1 Video Lamp VIDEO c pg 36 39 S Video Video Audio Input Connectors S VIDEO VIDEO AUDIO L R gt pg 59 DV Input connector DV IN gt pg 58 i Link refers to the IEEE1394 1995 industry specification and extensions thereof The amp logo is used for products compliant with the i Link standard p HDD Lamp c pg 38 DVD Lamp c pg 25 To access covered connectors pull and open the connector cover Rear View RIGHT LEFT Antenna Connectors ANTENNA IN OUT c pg 17 Component Video Output Connectors COMPONENT VIDEO OUT e pg 17 S video Output Connector S VIDEO OUT c pg 17 60 Q Audio Output Connectors AUDIO OUT RIGHT LEFT r pg 60 Q AV COMPU LINK Connector Not function with this unit Q Digital Audio Output Connectors DIGITAL OUT COAXIAL OPTICAL c pg 62 66 Q Cooling Fan e This prevents the temperature from rising inside the unit Do not remove it e Install the unit so as not to block the area around the fan e The cooling fan on the rear of the unit may be activated even if the unit is turned off in the following cases n the Automatic Satellite Programme Recording standby mode pg 48 slightly before the starti
172. ture Control function of DVD During playback or while stopped Press ON SCREEN twice to access the on screen bar The item currently selected is highlighted and pointed by TITLE 99 TRACK 99 EACH 0 00 DVD 3D ON CINEMA AUTO 1 E ies 2 Press lt gt to select then press ENTER The pop up window appears under the selected item TITLE 99 TRACK 99 EACH 0 00 3D ON CINEMA AUTO 1 VIDE Reo ww Lal Press V to select the desired option then press ENTER EACH 0 00 3D ON CINEMA 1 L3 CINEMA TITLE 99 TRACK 99 S59 Omi SHARP SOFT To clear the on screen bar Press ON SCREEN NOTE See the corresponding pages for details on each menu item Repeat Playback DVD DVD Audio Tz E Ed Ed co Es E EZ You can repeat playback as you like according to the type of disc Press ON SCREEN twice to access the on screen bar 2 Press lt gt to select then press ENTER The pop up window appears under the selected item TITLE 99 TRACK 99 EACH 0 00 DVD 3D ON CINEMA AUTO 1 anes 9 O rei 3 Press AV repeatedly to select the desired Repeat mode then press ENTER DVD RAM RW R OFF Repeat playback is not performed ALL REPEAT The whole disc is played back repeatedly TITLE REPEAT The current title is played back repeatedly DVD VIDEO OFF Rep
173. ubbing Menu screen Press D to select MANUAL then press ENTER 4 Perform step 4 of High Speed Dubbing From HDD To DVD The Manual Dubbing screen appears 5 Press AV to select REC MODE then press ENTER Press AV to select the desired option then press ENTER The confirmation screen appears NOTE In Video mode if the selected play list includes the scenes recorded in the different transfer rate the dubbing is performed in the highest transfer rate of the scenes in the selected play list However the lower transfer rate cannot be dubbed in the higher transfer rate Original Dubbing From DVD To HDD It is possible to dub the original recordings on DVD discs to the HDD deck Load a disc you want to dub 2 Press DUBBING to access the Dubbing Menu screen Press D to select ORIGINAL then press ENTER Press AV lt I gt to select indexes small pictures of desired original recordings and or play lists then press MARK After selecting all indexes you want to dub press ENTER You can select up to 8 original recordings and or play lists 5 Press AV to select EXECUTE or AUTO POWER OFF then press ENTER to start dubbing EXECUTE Select this to continue the dubbing operations AUTO POWER OFF Select this to continue the dubbing operations and turn off the unit after dubbing CANCEL Select this to cancel dubbing operation 6 Press lt gt to select EXECUTE th
174. ubbing operations and turn off the unit after dubbing While the dubbing screen is displayed you can also select this mode by pressing DUBBING CANCEL Select this to cancel dubbing operation NOTES e Play lists are dubbed as programmes e n Video mode if the selected play list includes the scenes recorded in the different transfer rate the dubbing is performed in the highest transfer rate of the scenes in the selected play list Just Dubbing From HDD To DVD By using Just Dubbing function when dubbing all selected original recordings and or play lists the unit automatically sets the appropriate recording mode depending on the combination of the total time of the selected recordings and or play lists to be dubbed and the available disc space Load a recordable disc 2 Press DUBBING to access the Dubbing Menu screen Press AV lt gt to select JUST then press ENTER 4 Perform steps 4 5 of High Speed Dubbing From HDD To DVD NOTES e Play lists are dubbed as programmes e n Video mode if the selected play list includes the scenes recorded in the different transfer rate the dubbing is performed in the highest transfer rate of the scenes in the selected play list However the lower transfer rate cannot be dubbed in the higher transfer rate Manual Dubbing From HDD To DVD It is possible to perform dubbing in the desired transfer rate Load a recordable disc 2 Press DUBBING to access the D
175. used While stopped While resume stopped While the disc tray opened Disc marks all light out No disc on the disc tray Disc marks all light out VR Mode Indicator gt pg 74 Lights when a DVD RW disc is formatted in VR mode Recording Mode Indicator XP SP LP EP FR gt pg 35 Blinks when recording mode is being set While FR is blinking the left 3 digits of the Multi Display B indicate setting values ranging from 60 to 480 After the value has been set only FR lights VPS PDC Recording Indicator gt pg 45 Lights when the VPS PDC recording function is activated Group Title Indicator GRP TITLE GRP or TITLE lights depending on a disc loaded while the left 2 digits of the Multi Display D indicate the numbers explained below GRP Total number of groups or group number being played back are displayed on the Multi Display TITLE Total number of titles or title number being played back are displayed on the Multi Display Track Chapter Indicator TRK CHAP TRK or CHAP lights depending on a disc loaded while the 3rd and 4th digits from the left of the Multi Display B indicate the numbers explained below Total number of tracks or track number being played back are displayed on the Multi Display CHAP Chapter number being played back are displayed on the Multi Display 6 TRK CHAP i 3D LPCM Simulated Surround Eff
176. ut of other audio equipment amplifier MD or DAT deck etc ANALOG AUDIO OUT STEREO DOLBY SURROUND Select the appropriate setting to accommodate the unit to the connected A V equipment This function takes effect when a DVD VIDEO disc is played back STEREO Select this when listening to conventional two channel stereo audio with the unit s AUDIO OUT connectors connected to a stereo amplifier receiver or TV set or in case you want to record the audio from a DVD VIDEO disc to a Mini Disc etc DOLBY SURROUND Select this when listening to multichannel surround audio with the units AUDIO OUT connectors connected to an amplifier receiver with a built in surround decoder or a surround decoder D RANGE CONTROL NORMAL WIDE RANGE TV MODE The dynamic range the difference between the loudest sound and the quietest one can be compressed during playback of a programme encoded in Dolby Digital format This function takes effect when a DVD VIDEO disc recorded in Dolby Digital format is played back at low or middle volume NORMAL Normally select this setting to activate this function WIDE RANGE Select this to deactivate this function when you enjoy wide dynamic range programme TV MODE Select this when you hear the sound through the TV s NOTES e This function takes no effect on programmes other than that recorded in Dolby Digital format e This function dose not work when Simulated Surround Effec
177. vent accidental erasure of the important titles Perform steps 1 of Modify Index lt pg 50 before continuing 2 Press AV lt I gt to select PROTECT then press ENTER 3 Press AV lt D to select a title you want to protect then press ENTER Press lt gt to select PROTECT then press ENTER appears e To cancel the protection repeat 3 4 again In step 4 select CANCEL then press ENTER 5 Press EDIT to return to the normal screen NOTE All the titles on a disc will be deleted once the disc is formatted even if they are protected titles pg 51 Delete Title You cannot record any more with Library Database Navigation once the registered titles on the disc reach 99 titles for the DVD deck and 200 titles for the HDD deck Deleting unnecessary titles after dubbing or other operations can increase remaining time and available recording capacity For DVD R discs although it is possible to delete recorded titles available recording capacity does not increase The deleted title is never resumed Play lists and title information in the unit s library are also deleted Press EDIT The Editing screen appears 2 Press AV lt I gt to select DELETE under ORIGINAL then press ENTER Press AV lt D to select one title you want to delete then press ENTER Press lt gt to select DELETE then press ENTER e When you cancel the deletion s
178. where you stop playback and resume playback from that position e Be sure to set RESUME to ON or DISC RESUME pg 68 1 Press during playback to memorize a resume point e The unit enters Resume Stop mode and memorizes the position where you have stopped playback as a resume point The inside of the disc status indicator on the front display panel blinks while memorising e The unit retains a memory of the resume points of the last 30 discs played back even though they have been ejected if RESUME is set to DISC RESUME pg 68 e To clear the resume points The inside of the disc status indicator stops blinking and lights When RESUME is set to ON e Press to turn off the unit Press 4 to take out the disc Press W in stop mode Press TOP MENU to display the top menu then start playback by selecting an item etc Press MENU to display the disc menu then start playback by selecting an item etc When RESUME is set to DISC RESUME Set RESUME to pg 68 Press W in stop mode Press TOP MENU to display the top menu then start playback by selecting an item etc Press MENU to display the disc menu then start playback by selecting an item etc 2 Press gt in stop mode to resume playback The unit starts playback from the resume point BASIC OPERATIONS ON DVD DECK 27 NOTES e DISC RESUME setting
179. x gt pg 50 before continuing 2 Press AV lt gt to select CHAPTER then press ENTER 3 Confirm the arrow is on EDITING MODIFY CHAPTER MARK then press ENTER at positions you want to mark e The newly created chapter is displayed e To undo the marking press lt to select RETRY then press ENTER Repeat the above procedure to locate another point to mark 4 Press gt and press lt 4 lt or gt gt to select one chapter you want to delete then press 5 Press lt gt to select ERASE then press ENTER e The selected chapter is deleted e To undo the deletion press lt gt to select RETRY then press ENTER Repeat the above procedure to locate another point to delete 6 Press EDIT to return to the normal screen NOTE There may be a discrepancy of several seconds between the scene you intend to edit and the scene which is actually edited CHAPTER 03 10 0 07 01 uum 01 00 00 00 02 00 05 30 03 00 07 00 04 00 30 00 MARK M ERASE retry Modify Play List Information DVD DVD Audio RAM VIDEO cD e Turn on the TV and select the AV mode e Slide the TV CABLE SAT DVD switch to DVD e Press HDD or DVD to choose the corresponding deck e Load a DVD disc to modify ATTENTION It is not possible to modify discs recorded on DVD units from other manufacturers CABLE SAT TV DVD OLO anil DVD MEM

JVC DRMH20 DVD Recorder

Contents

Download Pdf Manuals

Related Search

Related Contents