Pyle PLTCDN7 Car DVD Player
Contents
1. This is to cut scenes that are unfavorable for children Select a desired parential lock When a parential lock is selected you need to input a password to see the picture 1 G 2 3 PG 4 PG 13 5 6 PG R 7 NC 17 8 ADULT The factory default setting is 8 ADULT PASSWORD You can change the old password 4 digit to new one 4 digit 1 Select PASSWORD and CHANGE 2 Input an old password with number button on the remote control and touch ENTER 3 Input a new password with number button on the remote control and touch ENTER 4 Input a new password again in the CONFIRM and touch ENTER Factory default setting is No Password DEFAULTS Select RESET and touch ENTER to reset all saved items to the factory defaults DVD Video Operation with Touch Keys 20 1 Insert a DVD disc into the disc slot hole The mode automatically switches to DVD mode and Playback starts 2 Press the OPEN CLOSE button to open the monitor In case playback does not operate normally press the RESET button with a pointed object to restart the operation Switching the NTSC PAL system You can switch the video system See Selecting Video System in TV operations with Touch Key in Page 13 Pausing Disc Play Touch II to pause playback Touch II again to resume playback Stopping Disc Play Touch to stop playback Touch or II to resume playback Fast Forward Play Touch for fast2. or to emphasize the sound in the front or the rear channel Selecting EQ 1 Touch EQ DSP to show the menu 2 Touch EQ to select one of EQ mode Each time EQ is touched the EQ mode switches as follows OFF gt CLASSIC gt ROCK gt POPS gt JAZZ gt OFF Setting Up 3D Sound 1 Touch EQ DSP to show the menu 2 Touch 3D to select 3D sound ON or OFF ON 3D sound on OFF 3D sound off Setting Up 4 1 Channel Output 1 Touch EQ DSP to show the menu 2 Touch 4 1 Ch to select 4 1 channel ON or OFF ON 4 1 Ch on OFF 4 1 Ch off Setting Up A V 1 or A V 2 Input 1 Touch SETUP and then Touch EXT DEVICE to show the menu 2 Touch AV 1 or AV 2 to select ON or OFF Each time AV 1 or AV 2 is touched ON or OFF is selected 3 Select ON when a external device is connected to AV 1 or AV 2 Select OFF when no external device is connected to AV 1 or AV 2 When a navigation unit is connected to AV 1 or AV 2 input make sure to set OFF for AV 1 or AV 2 which it is connected to System Settings with Touch Keys 11 Setting Clock 1 Touch SETUP and then Touch SYSTEM to show the menu 2 Touch HOUR or to adjust the hour 3 Touch MIN or to adjust the minute The screen dispalys 24 hours and sub LCD dispalys 12 hours Clock on the sub LCD displays only when the power of the unit is off and ACC on Adjusting the Volume of Subwoo
3. VCD Operation with Touch Keys 22 1 Insert a VCD disc into the disc slot hole The mode automatically switches to DVD mode and Playback starts 2 Press the OPEN CLOSE button to open the monitor 3 Touch the screen to show the touch keys Pausing Disc Play Touch II to pause playback Touch II again to resume playback Stopping Disc Play Touch to stop playback Touch or II to resume playback Fast Forward Play Touch for fast forward Each time is touched the fast forward speed goes from 1X 2X 3X 4X to normal playback Fast Backward play Touch for fast backward Each time is touched the fast backward speed goes from 1X 2X 3X 4X to normal playback VCD operations with the remote control Slow Playback 1 Press the SLOW button Each time SLOW button is pressed the slow playback speed goes from forward 2X 4X 8x backward 2X 4X 8X to normal playback 2 Press II button to return to normal playback There is no sound during slow playback Frame by Frame Playback 1 Press the STEP button Press the button again to show next image 2 Press the II button to return to normal playback There is no sound during frame by frame playback Repeat between A and B Scene 1 Press the A B button at the beginning of the desired scene 2 Press the A B button again at the end of the desired scene The scene from A to B continues repeating 3 Press the A B
4. button again to cancel REPEAT A B Viewing Zoom 1 Each time the ZOOM button is pressed The size of image changes from X1 5 X2 X3 to normal 2 While zooming press the or button to scroll the image 3 Press the II button to return to normal playback Listening to CD with Touch Keys 23 1 Insert a Music CD disc into the disc slot hole The mode automatically switches to DVD mode and Playback starts 2 Press the OPEN CLOSE button to open the monitor 3 Touch the screen to show the touch keys Pausing Disc Play Touch II to pause playback Touch II again to resume playback Stopping Disc Play Touch to stop playback Touch or II to resume playback Fast Forward Play Touch for fast forward Each time is touched the fast forward speed goes from 1X 2X 3X 4X to normal playback Fast Backward play Touch for fast backward Each time is touched the fast backward speed goes from 1X 2X 3X 4X to normal playback Track Search 1 Touch I to search the track number to backward 2 Touch I to search the track number to forward CD operations with the remote control Repeat Play Press the REPEAT button to select ONE ALL or OFF ALL All the track on the current disc plays repeatedly ONE The selected track on the current disc plays repeatedly OFF Repeat play will be off Random Play Press the RANDOM button to select
5. ON or OFF ON All the tracks on the current disc plays in random order OFF Randpm play will be off Repeat between A and B Section 1 Press the A B button at the beginning of the desired section 2 Press the A B button again at the end of the desired section The section set from A to B continues repeating 3 Press the A B button again to cancel REPEAT A B Listening to MP3 with Touch Keys 24 1 Insert an MP3 disc into the disc slot hole The mode automatically switches to DVD mode and Playback starts 2 Press the OPEN CLOSE button to open the monitor 3 Touch the screen to show the touch keys 4 Touch or to select the folder and touch key 5 Touch or to select the file that you want to play and touch key Pausing Disc Play Touch II to pause playback Touch II again to resume playback Stopping Disc Play Touch to stop playback Touch or II to resume playback Fast Forward Play Touch for fast forward Each time is touched the fast forward speed goes from 2X 4X 6X 8X to normal play Fast Backward play Touch for fast backward Each time is touched the fast backward speed goes from 2X 4X 6X 8X to normal playback Track Search 1 Touch I to search the track to backward 2 Touch I to search the track to forward MP3 operations with the remote control Repeat Play Press the REPEAT butt
6. RATING setting recording of the selected voice or subtitle language Replace the batteery with one having the same rating Specifications 32 Power Requirement 14 4V DC 11 16V Current Consumption DVD Monitor 2A Junction Box 10A Operating Temperature 10 60 General Storage Temperature 20 80 Total 178 W X 50 H X 190 D DVD Monitor Install 178 W X 50 H X 165 D Size Weight JunctionBox Total 257 W X 40 H X 187 D Weight Display Size 7 Inch Wide LCD Type Transparent Type TN LCD Monitor Section Drive Method TFT Active Matrix Number of Pixels 336 960 1 440 X 234 Back Lighting U Shaped Cold Cathode Fluorescent Tube Viseo System NTSC PAL Switchable Maximum Power Output 45W 4ch 35W 1ch Center Pre Output Voltage 1VRMS 5chRMS1V Subwoofer Output Voltage RMS 1 2VRMS Audio Section Speaker Impedance 4 Decoder Linear PCM Dolby Digital Dolby Pro Logic DTS EQ Classic Rock Pops Jazz 3D Sound Available Bass Treble Control Range 10dB System DVD Video VCD CD dtsCD MP3 DVD Player Section D A converter 96 24bit Channels 5 1ch 4ch Don Mix MP3 Decoding Format MPEG 1 amp 2 Audio Layer 3 Frequency Range 87 5 108 Frequency Step Manual Tuning 50 FM Radio Section Seek Tuning 100 Usable Sensitivity 15dB S N 30dB Stereo Separation 25dB S N Ratio 50dB Frequency Range USA Band 530 1710 Europe Band 522 1620 AM Radio Section Frequency Step USA B
7. forward Each time is touched the fast forward speed goes from 2X 8X 16X 32X 64X to normal playback Fast Backward play Touch for fast backward Each time is touched the fast backward speed goes from 2X 8X 16X 32X 64X to normal playback Chapter Search 1 Touch I to search the chapter number to backward 2 Touch I to search the chapter number to forward DVD Video operations with the remote control Disc Menu 1 Press the TITLE button to show root menu on the screen 2 Press the or button to select the desired menu 3 Press the ENTER button to confirm and play the selected menu Switching the Subtitle Language Press the SUB T button repeatedly until the desired subtitle languge is selected This function only available when there are two or more languages recorded in the disc Switching the Audio Language Press the AUDIO button repeatedly until the desired audio languge is selected This function only available when there are two or more languages recorded in the disc 21 Slow Playback 1 Press the SLOW button Each time the SLOW button is pressed the slow playback speed goes from forward 2X 4X 8x backward 2X 4X 8X to normal playback 2 Press the II button to return to normal playback There is no sound during slow playback Frame by Frame Playback 1 Press the STEP button Press the button again to show next image 2 Press the
8. from menu If the temperature of the monitor drops the screen may appear darker when power is first turned on due to the characteristics of a liquid crystal panel Wait a while Normal brightness will return When the unit is set to auto dimmer it is not linked to the vehicle s light switch Make propper connections according to Wire connection Separate the two antennas as far as possible Turn off the main unit Turn off Attenuator Reconnect the input output wires or the wiring harness correctly Reconnect the input output wires or the wiring harness correctly Troubleshooting guide 31 Problem The sound quality is poor or distorted Radio reception is poor The memory is erased when the ignition is turned off The sound picture skips on a DVD VCD CD A track will not play The subtitle is not displayed The voice or subtitle language cannot be changed The viewing angle cannot be changed Playback will not start even after a title is selected The voice or subtitle language selected in the initial setting is not played Remote control does not work Possible Cause One of the speaker wires is being pinched by a screw in the car The speakers are not wired correctly The car antenna is not extended The antenna control wire is not connected The battery wire has not been connected to the proper terminal The disc is scratched or dirty Random play has been selected T
9. Contents 1 Thank you for purchsing this product Please read this owner s manual carefully before installation and operating this unit and follow up all instructions for safe connecting operating this product Otherwise the unit can be damaged Pleas keep this manual in a handy place for future use Contents Precaution 2 Handling Discs 3 Operating with the main unit 4 Operating with the Remote Control 5 6 Basic Opreations 7 Radio Opration 8 Basic Opreations with Touch Keys 9 10 System Settings with Touch Keys 11 Radio Opration with Touch Keys 12 TV Opration with Touch Keys 13 DVD CD Changer Operation with Touch Keys 14 Navigation Operation with Touch Keys 14 Rear View Camera Operation with Touch Keys 15 DVD System Settings wi
10. II button to return to normal playback There is no sound during frame by frame playback Repeat Playback Each time the REPEAT button is pressed the repeat function switches as follows CHAPTER REPEAT gt TITLE REPEAT gt REPEAT OFF gt CHAPTER REPEAT Repeat between A and B Scene 1 Press the A B button at the beginning of the desired scene 2 Press the A B button again at the end of the desired scene The scene from A to B continues repeating 3 Press the A B button again to cancel REPEAT A B Searching with a Chapter Title number 1 Press the SEARCH button to show chapter and title number 2 Press the or button to select chapter or title 3 Input the number of the chapter or title that you want to play back with the 0 to 9 key 4 Press the ENTER button to confirm and play the selected chapter title number Viewing Zoom 1 Each time the ZOOM button is pressed The size of image changes from X1 5 X2 X3 to normal 2 While zooming press or to scroll the image 3 Press II button to return to normal playback Time Display Each time the DISPLAY button is pressed the time display during playback switches as follows 1 Displaying the elapsed time of the current title 2 Displaying the remaining time of of the current title 3 Displaying the elapsed time of the current chapter 4 Displaying the remaining time of of the current chapter 5 Time display off
11. Selecting the Radio Band Touch BAND to select radio band Each time BAND is touched the radio band switches in following order FM1 gt FM2 gt FM3 gt AM1 gt AM2 gt FM1 Seek Tuning Touch or to automaticaly seek a radio station Tuning automatically stops at a broadcasting frequency Manual Tuning Touch or repeatedly until the desired station is selected The frequecy changes one step at a time Manual Preset Memory 1 Tune in the station to be preset with seek or manual tuning 2 Touch one of the preset CH1 CH6 for more than 2 seconds at which you want to store the selected station 3 Each band can store 6 stations FM1 6 FM2 6 FM3 6 AM1 6 AM2 6 Total 30staions Auto Preset Memory 1 Touch BAND to select the band for the stations to be preset 2 Touch AS to store the stations automatically The stations will be automatically stored in the PRESET buttons in order of signal strength Preset Scan The frequency of the stations stored in the preset CH1 CH6 is being displayed on the screen 1 Touch PS shortly The unit starts scanning each station for 5 seconds sequentially 2 Touch PS shortly to stop scanning and retain the station currently selected Recalling the Preset Station 1 Touch BAND to select the desired band 2 Touch one of preset CH1 CH6 shortly at which the desired station is preset Cautions In case the radio is worked over 3 hours wit
12. Up 1 Touch SETUP and then Touch EXT DEVICE to show the menu 2 Touch RVC to select ON or OFF Each time RVC is touched ON or OFF is selected 3 Select ON when a rear view camera is connected to RVC input of the AV control box or select OFF when no rear view camera is connected to The factory default setting is OFF Connect video output of your rear view camera to video input RVC IN of the AV control box Watching the Picture of Rear View Canmera 1 Touch MODE to show the mode menu 2 Touch RVC or set the rear gear on any mode The monitor shows the picture of the back view camera picture A rear view camera is an optional item This unit only offers input for the system MODE DVD Setup Setup Enter GENERAL SETUP SPEAKER SETUP AUDIO SETUP PREFERENCES EXIT SETUP SETUP MENU MAIN PAGE 16 General Setup 17 PIC MODE Select according to the disc recording format If you are not sure of the recording format it is recommended to select AUTO AUTO Automatically select the image mode according to the disc recording format HI RES Play with high resolution for TV format NON FLICKER Selected to lower flash playing for movie format The factory default setting is AUTO ANGLE MARK Select according to the disc recording format You can set up so that the angle mark appears on the screen where the angles can be swithced ON To show angle mark
13. and 10 Europe Band 9 Usable Sensitivity 35dB S N 20dB Image Rejection Ratio 45dB System NTSC PAL BG PAL DK PAL I TV Tuner Setion Channel Coverage NTSC 2 13 VHF 14 69 UHF PAL E2 S41 VHF E21 E69 UHF Antenna Input 4 ch Diversity 75 Video Input Voltage 1 0Vpp 75 Input Output Section Video Output Voltage 1 0Vpp 75 Audio Input Voltage 1 0V 22
14. at which external sounds can be heard Mute On Off Each time the MUTE button is pressed mute is turned on and off Opening the Monitor Press the OPEN CLOSE button The monitor comes out and stand up automatically When the unit is off pressing the OPEN CLOSE button will turn on the power and the monitor will be automatically opened If the monitor touches an obstacle while it is opening or closimg the monitor will stop moving or close Close the monitor after removing the obstacle Do not touch the monitor when it is opening or closing Doing so may damage the unit To prevent the battery from going dead operate this unit with the engine running OPEN CLOSE The monitor can be closed only when it is positioned parallel with the front of unit Position manually the monitor parallel with the front of unit by holding left and right side of the monitor with hands and then press the OPEN CLOSE button to close it When a picture displays on the monitor pressing the OPEN CLOSE button will close the monitor But the sound can still be heard If you want to turn off the sound press the MODE POWER button more than 2 seconds to turn off the power and the sound SLIDE SLIDE ASPECT FULL gt WIDE gt NORMAL gt FULL FULL WIDE NORMAL NORMAL FUNC BASS FUNC TREBLE FUNC BALANCE FUNC FADER 7 Radio Operation 8 Press the MODE POWER button repeatedly until ra
15. atically stored in the PRESET buttons in order of signal strength 3 Each band can store 6 stations in the PRESET buttons as follows Preset Scan This function is useful when searching the stations stored in each PRESET buttons 1 Press the PS AS button shortly The unit starts scanning each station for 5 seconds sequentially 2 Press the PS AS button shortly again to stop scanning and retain the station currently selected Recalling the Preset Station Press one of the PRESET button which the desired station is preset Basic Operations with Touch Keys 9 This unit has Touch Screen feature You can select adjust the functions by touchung touch keys displaying on the monitor You can touch the screen with finger or the plastic pen supplied with this unit 1 Press the OPEN CLOSE button to open the monitor and turn on the power 2 Touch anywhere of the screen softly with a finger to show the menu of touch keys BASiC MODE 1 MODE key 2 Current mode display 3 EQ DSP key 4 SETUP key 5 PICTURE key 6 EXIT Key 7 TILT Up Down key Selecting the Mode 1 Touch MODE to show the menu of each mode on the screen 2 Touch one of the mode key that you want Adjusting Sound Volume Touch VOL or to adjust the volume of the sound The adjusted sound volume is stored in memory Adjusting Tilt Angle Touch TILT or to adjust vertical angle of the monitor The adjusted angle is stored
16. caccident Stop the car in a safe location and apply the parking break to watch the picture 1 Driving on extremely bumpy roads which cause severe vibration may cause the sound to skip 2 When the temperature of the unit falls such as during winter the monitor screen will become darker than usual Normal brightness will return after using the monitor for a while 3 This unit uses a precision mechanism Even in the event that trouble arises never open the case disassemble the unit or lubricate the rotating parts Be sure to consult your supplier 4 Any changes or modifications to this product not approved by the supplier could void the warranty and will violate FCC approval WARNING Handling Discs 3 Playable Discs This product only requires using of 12cm following circular discs DVD R DVD RW CD R and CD RW can be played back but it depends on the recorded condition Region number Regional restriction number 1 USA CANADA 2 EUROPE JAPAN SOUTH AFRICA MID EAST ASIA 3 KOREA SOUTH ASIA 4 LATIN AMERICA SOUTH AMERICA AUSTRALIA NEW ZELAND 5 RUSSIA INDIA MONGOLIA AFRICA 6 CHINA 7 ALL COUNTRY The Region number of this unit is set at your region number DVD players and DVD video discs each have an assigned region number and if this numbers do not match a disc cannot be played Handling Discs Do not forcibly insert or remove discs Turn off the power after remove the disc loaded Do not use discs
17. dio mode is selected In case the radio is tuned over 3 hours wih closing the monitor The unit will be hotter Please make sure to open the monitor when you want to listen to radio over 2 hours or else the unit may be damaged Selecting Radio Reception Area See Selecting Radio Reception Area in page 12 Selecting the Radio Band 1 Press the MODE POWER button repeatedly until the radio mode is selected Both the sub LCD and the monitor displays information on the radio station tuned in 2 Press the ENTER button to selct the desired radio band Each time the ENTER button is pressed the radio band switches in following order FM1 gt FM2 gt FM3 gt AM1 gt AM2 gt FM1 Seek Tuning Push the JOG or button to automaticaly seek a station Tuning automatically stops at a broadcasting frequency Manual Tuning Push the JOG or button repeatedly until the desired station is selected The frequecy changes one step at a time Manual Memory 1 Tune in the station to be preset with seek or manual tuning 2 Press one of the PRESET buttons for more than 2 seconds at which you want to store the selected station 3 Each band can store 6 stations in the PRESET buttons as follows FM1 6 FM2 6 FM3 6 AM1 6 AM2 6 Total 30staions Auto Memory 1 Press the ENTER button to select the band for the stations to be preset 2 Press the PS AS button for more than 2 seconds Stations are autom
18. e 10 or 12 DVD changer see the owner s manual of the DVD changer Operating the10 12 DVD Changer or the 6 CD Changer Touch MODE key and then touch CDC key to select CD DVD changer mode STATUS This shows the current CD status Disc check Seek Etc TIME This shows playing time of the disc being played Selecting a Disc Touch or button to select DISC Pausing Disc Play Touch II to pause playback Touch II again to resume playback Stopping Disc Play Touch to stop playback Touch II to resume playback Fast Forward Play Touch for fast forward Fast Backward play Touch for fast backward Track Chapter Search Touch I or I to search the track chapter number of the current disc Repeat Play Touch RPT to select ONE ALL or OFF ALL All the track on the current disc plays repeatedly ONE The selected track on the current disc plays repeatedly OFF Repeat play will be off Intro Play Touch INT to select ONE ALL or OFF ALL The first 10 seconds of each track of all discs plays in succession ONE The first 10 seconds of each track of the current disc plays in succession OFF Intro play will be off Random Play Touch RDM to select ONE ALL or OFF ALL All the tracks of all discs plays in random order ONE All the tracks on the current disc plays in random order OFF Randpm play will be off Navigation Operation with Touch Keys 15 Set
19. e screen is dark The screen does not darken when the vehicle s lights are turned on AM FM radio reception is poor and or there is noise No sound can be heard or the volume is low Possible Cause The fuse has blown No ACC position on vehicle ignition The computer chip in the unit is not functioning normally The parking brake is not engaged The unit is not connected to the parking brake detection switch The parking brake is not engaged The color system is set incorrectly The unit is a location where temperature is low The unit is set to auto dimmer The illumination wire has not been connected If manual dimmer is set The TV antenna and vehicle s radio antenna are to close Attenuator is turned on The fader or balance settings are set all the way to one side The input output wires or wiring harness are connected in correctly Solution After checking for short circuits in the wires replace the fuse with one having the same rating Connect the same wire to the ignition as the battery wire Press the reset button on the unit For safety reasons the monitor does not open while the vehicle is moving Engaging the parking brake Make proper connections according to wire connection For safety reasons no television video images are displayed while the vehicle is moving Engaging the parking brake will cause images to be displayed Please switch to correct color system
20. fer 1 Touch SETUP and then Touch VOLUME to show the menu 2 Touch Woofer VOL or to adjust the subwoofer volume Adjusting the Brightness of Picture 1 Touch PICTURE to show the picture menu 2 Touch BRIGHT or to adjust the brightness of picture Adjusting the Color Density of Picture 1 Touch PICTURE to show the menu 2 Touch COLOR or to adjust the color density of picture Adjusting the Tint of Picture 1 Touch PICTURE to show the menu 2 Touch HUE or to adjust the tint of picture Selecting the Brightness of Backlight 1 Touch PICTURE to show the menu 2 Touch DIMMER to select the brightness of backlight Each time DIMMER is touched the menu switches as follows USER gt STD gt DAY gt NIGHT gt AUTO gt USER USER To adjust the dimmer level by end user STD Standard level of the dimmer adjusted by the factory DAY Recommended when the surrouding is very bright NIGHT Recommended for night time or dark surrounding AUTO Automatically adjusted according to the surroundung brightness Radio Operation with Touch Keys 12 1 Touch softly with finger anywhere of the screen to show touch key menu 2 Touch MODE to show the mode menu and then touch RADIO to select radio mode Selecting Radio Reception Area 1 Touch SETUP and then Touch SYSTEM to show the menu 2 Touch RADIO AREA to select radio area for your country
21. he DVD disc being played does not contain the recording of subtitles The DVD disc being played does not contain the recording of more than one audio or subtitle language The DVD disc being played does not contain the recording of more than one angle You are attempting to switch the angle in a DVD section where more than one angle is not recorded A viewing restriction RATING has been set for the disc The DVD disc being played does not contain the recording of the selected voice or subtitle language The battery runs out Solution Reset the fader and or balance settings Reconnect the speaker wires so that each output terminal is connected to a different speaker Pull the antenna out all the way Connect the wire correctly referring to the section on connections Connect the wire correctly referring to the section on connections Clean the disc Turn off random play The subtitle cannot be displayed when the DVD disc being played does not contain the recording of subtitles The voice or subtitle language cannot be changed when the DVD disc being played does not contain the recording of more than one voice or subtitle language The viewing angle cannot be changed when the DVD disc being played does not contain the recording of more than one angle More than one viewing angle may be recorded only in limited sections in a disc Check the viewing restriction level RATING setting level
22. hout opening the monitor The unit becomes hotter It is strongly recommended to open the monitor when you want to listen to radio over 3 hours or else the unit can be damaged USA USA Canada S America EUROPE EU S E Asia M E Asia Africa KOREA Korea Taiwan Philipine CHINA China SETUP SYSTEM VIDEO STD VIDEO STD NTSC gt PAL BG gt PAL DK gt PAL I gt PAL AUS gt NTSC lt TV System for Your Country gt NTSC PAL BG PAL I PAL DK PAL AUS MODE TV BAND BAND TV1 gt TV2 gt TV3 gt TV1 1 36 BAND AS BAND 1 36 13 DVD CD Changer Operation with Touch Keys 14 Setting Up a DVD CD Changer 1 Touch SETUP and then Touch EXT DEVICE to show the menu 2 Touch CDC to select DVD or CD changer source Each time CDC is touched the source is switched as follows NONE gt MPIRE gt DVDC 12 gt DVDC 10 gt S CDC gt CDC 6 gt NONE 3 Select 6 CDC 10 DVDC or 12 DVDC when it is connected to the AV control box Select S CDC when Sanyo 6 CD changer is connected to the AV control box Select NONE when no DVD or CD changer is connected to the AV control box The factory default setting is NONE The car DVD or CD changer is an optional item This unit only offers input for the system Only when 6 disc CD changer 10 or 12 disc DVD changers which we are supplying is connected all the functions are working as mentioned in here To control of th
23. in memory Removing the menu on the screen Touch EXIT to exit from the menu on the screen or else the menu will disappear within 10 seconds Touch Point Calibration The touch point may be moved a little after long using of the unit In this case reset the touch point as follows 1 Press FUNC button of the main unit for more than 10 seconds The monitor shows following picture 2 Press the center of cross mark on the left upper side with a plastic pen with a rounded end The cross mark disappears and appears again on the right upper side 3 Press the center of cross mark on the right upper side The cross mark disappears and appears again on the left bottom 4 Press the center of cross mark on the left bottom side The cross mark disappears and appears again on the right bottom 5 Press the center of cross mark on the right bootom side The cross mark disappears and appears The correct touch point is set up System Settings with Touch Keys 10 Adjusting the Bass Level 1 Touch EQ DSP to show the audio menu 2 Touch or to decrease or increase the bass level Adjusting the Treble Level 1 Touch EQ DSP to show the menu 2 Touch or to decrease or increase the treble level Adjusting the Balance Levels 1 Touch EQ DSP to show the menu 2 Touch or to emphasize the sound in the left or the right channel Adjusting the Fader Levels 1 Touch EQ DSP to show the menu 2 Touch
24. on the screen OFF To close angle mark The factory default setting is ON OSD LANGUAGE Select a desired language for On Screen Display OSD to set it ENGLISH English OSD is selected KOREAN Korean OSD is selected The factory default setting is ENGLISH CAPTIONS Select ON or OFF to set the display captions on or off The factory default setting is OFF MAIN PAGE Select MAIN PAGE to return to SETUP MENU MAIN PAGE menu LT RT STEREO OFF STEREO ANALOG SPDIF RAW SPDIF PCM ANALOG SPDIF RAW SPDIF PCM LINE OUT RF REMOD RF REMOD STEREO L MONO R MONO MIX MONO STEREO OFF ON AUTO ON LPCM 48K LPCM 96K LPCM 96K 18 Preferences 19 AUDIO Select a desired audio language KOREAN ENGLISH FRENCH SPANISH CHINESE JAPANESE The factory default setting is ENGLISH This option is available only when the language selected is recorded in the disc SUBTITLE Select a desired subtitle language KOREAN ENGLISH FRENCH SPANISH CHINESE JAPANESE OFF This option is available only when the language selected is recorded in the disc The factory default setting is ENGLISH DISC MENU Select a desired DVD menu language KOREAN ENGLISH FRENCH SPANISH CHINESE JAPANESE This option is available only when the language selected is recorded in the disc The factory default setting is ENGLISH PARENTAL
25. on to select REP ONE FOLDER REPEAT or FOLDER REP ONE The selected track on the current folder plays repeatedly FOLDER REPEAT All the tracks on the current folder play repeatedly FODER Repeat play will be off Random Play Press the RANDOM button to select RANDOM SHUFFLE ON or FOLDER RANDOM All the tracks on the current folder plays in random order SHUFFLE ON The selected track on the current folder plays in random order FOLDER Random play will be off Accessries 25 Main Unit Remote control with a battery x each 1EA NINET Cable x 1EA Touch Ceramic Pen x1EA Trim Plate x 1EA Mounting Half Sleeve x 1EA Mounting Bracket x1EA Removal Key x 2EA Hex Head Screw M5 x 15mm x 4EA Binding Head Screw 15 x 15 x 1EA Spring Washer 5 2 x 1EA Plate Washer 5 2x 1EA Power Cable x 1EA Cleaning Cloth x 1EA AV control Box Power Cable x 1EA Mounting Bracket x 2EA Binding Head Screw M4 x 6mm x 4EA Binding Head Screw M5 x 16mm x 4EA Installing the A V Control Box Install the A V Control Box on somewhere under a front seat Installation 26 Installing the Unit 1 Place the universal mounting bracket Half Sleeve into the instrument panel and bend each stopper of the mounting bracket inward by a screwdriver 2 Insert the unit into the mounting bracket until it locks after connecting the wires 3 Mount the outer escutcheon so that all the hooks are looked Removing the unit 1 Unfasten
26. on with a pointed object to restart the operation when the power of the unit is on Pressing the RESET button will turn off the power Press the MODE POWER button to turn power on When the screen shows touch key RADIO on another mode change the mode to radio mode and then return to the original mode Turning On the Power Press the MODE POWER button shortly to switch on the unit When the power of the unit is off pressing the OPEN CLOSE button will turn on the power and the monitor will automatically open Turning Off the Power Press the MODE POWER button for more than 2 seconds again to switch off the unit When the monitor is open pressing the OPEN CLOSE button will close the monitor and video is off but sound is still working When the monitor is open pulling out the car key ACC OFF will turn off the power and close monitor automatically Selecting a Mode 1 Press the MODE POWER button shortly to change the mode of operation 2 Each time this button is pressed the mode switches in the following order RADIO gt CDC DVDC gt DVD gt TV gt NAVI gt AV1 gt AV2 gt RVC gt RADIO OFF or NONE for set up CDC AV1 AV2 RVC is selected thoes modes do not appear on the monitor Adjusting the Volume Press the Volume or button on any mode to adjust the volume The volume level is indicated in the monitor from 0 minimum to 50 maximum While driving Keep the volume level
27. ore 22 ASPECT Aspect 23 SLIDE Sliding Monitor Operating with the Remote Control 5 Replacing the battery for the remote control 1 Slide and hold the hooker in the figure of the battery cover to in the direction of the arrow 2 Slide the battery cover downward hoding the hooker in the direction of the arrow 3 insert the battery CR2025 3V with O face up 4 Close the battery cover Do not use metal tweezers to hold the battery to prevent short circuit Dispose of spent batteries in compliance with all applicable regulation Number Radio TV CDC DVD CD 1 POWER ON OFF 2 OPEN CLOSE 3 MODE 4 MUTE 5 Auto Store Preset Scan 6 Function 7 ASPECT 8 Preset 1 Ch No Preset 2 Ch No Preset 3 Ch No Preset 4 Ch No Preset 5 Ch No Preset 6 Ch No Ch No Intro Ch No Random Ch No Disc Up Ch No Disc Down Figure 10 9 Clear 10 Volume Up Down 11 TILT Up Down 12 I Track Chapter Down 13 I Track Chapter Up 14 Fast Backward 15 Fast Forward 16 II Pause Play 17 STEP 18 DISPLAY 19 Ch Seek Up Upper Ch Seek Down Downward Ch Tune Down To the Left Ch Tune Up To the Right 20 Band Enter Play 21 TITLE 22 SUB TITLE 23 AUDIO 24 REPEAT 25 SLOW 26 ZOOM 27 A B 28 STEP 29 RANDOM 30 PROGRAM 31 SEARCH 32 DVD SETUP REMOTE CONTROLLER KEY FUNCTION Basic Operations 6 Resetting In case the unit does not operate normally press the RESET butt
28. th Touch Keys 16 General Setup 17 Speaker Setup 17 Audio Setup 18 Preference 19 20 DVD Video Operation with Touch Keys 21 VCD Operation with Touch Keys 22 Listening to CD with Touch Keys 23 Listening to MP3 with Touch Keys 24 Accessories 25 Installation 26 Wire Connections 27 Connection for AV Equipments 8 29 Specifications 30 31 Troubleshooting Guide 32 Precautions 2 Warning Screen While the vehicle is in motion the monitor only shows WARNING PICTURE to prevent traffi
29. that have large scratches are misshappen cracked etc When those discs loaded the monitor shows Disc Error In this case eject the discs No ejecting those discs can damage the unit Do not touch the recording side of discs by hands Hold it carefully by the edges Donot expose discs to direct heat from heaters or any heat sources Do not expose discs to excess humidity or dust To remove fingermarks and dust wipe in a straight line from the center of the disc to the circumference with soft well dried cloth Do not clean discs surface with solvent thinner and other chemicals With the screen open a driver may not see the disc insertion slot For your safety insert a disc with the screen closed Operating with the main unit 4 Number Radio TV DVD CD 1 VOLUME Volume Down 2 VOLUME Volume Up 3 MODE Short Key Mode Power On POWER Long Key Powe Off 4 OPEN CLOSE Monitor Open Close 5 JOG Ch Seek Up Upper 6 JOG Ch Seek Down Downward 7 JOG Ch Tune Down To the Left 8 JOG Ch Tune Up To the Right 9 JOG Center Band Enter 10 MUTE Mute 11 FUNC Setting Sounds 12 Preset 1 Preset 1 Track Chapter Fast Forward 13 Preset 2 Preset 2 Track Chapter Fast Forward 14 Preset 3 Preset 3 RPT Repeat 15 Preset 4 Preset 4 RDM Random 16 Preset 5 Preset 5 SUB T Sub Title 17 Preset 6 Preset 6 AUDIO Audio 18 Eject Disc Eject 19 R Sensor Remote Sensor 20 Reset Reset 21 PS AS Preset Scan Auto St
30. the hex nut when the rear of the unit has been secured with it 2 Remove the outer escutcheon 3 Insert the 2 keys as the figure between the spring and the mounting bracket then pull the unit out Keep the 2 keys in safe You cannot remove the unit without it 1 Make sure to ground the unit to a negative 12V DC power supply 2 When replacing a fuse only use a new one with the prescrived rating Using a fuse with wrong rating may cause the unit to malfunction 3 To prevent short circuits when replacing a fuse first disconnect the wiring harness 4 Do not use any screws except for the ones provided Using improper screws may damage the unit 5 If you experience problems during installation consult your supplier Wire Connection 27 1 Be sure that the PARKING SENSOR WIRE must be grounded or opened If it is connected to ACC B The unit can be damaged 2 Do not ground the POWER ANTENNA wire If it is grounded the unit can be damaged Connection for AV Equipments 28 Connection for AV Equipments 29 Troubleshooting guide 30 What might appear to be malfunction in your unit may just be the result of slight misoperation or miswiring Before calling service first check the following table for possible problems Problem The power does not turn Nothing happens when the buttons are pressed The monitor does not open close No television video image appears Television video image appears black white Th
31. ting Up 1 Touch SETUP and then Touch EXT DEVICE to show the menu 2 Touch NAVI to select a navigation Input source Each time NAVI is touched Input source is switches as follows lt Version 1 gt NONE gt NOVA gt DW gt NONE NONE Select no navigation unit is connected to the unit NOVA or DW Select RGB output of your navigation is connected to RGB input of the main unit The factory default setting is NONE lt Version 2 gt NONE gt RGB gt AV 1 gt AV 2 gt NONE NONE No navigation unit is connected to the unit RGB RGB output of your navigation is connected to RGB input of the main unit AV1 AV output of your navigation is connected to AV1 input of the AV control box AV2 AV output of your navigation is connected to AV2 input of the AV control box The factory default setting is NONE Check the version of your unit and set up according to the version Watching the Picture of Navigation 1 Touch MODE to show the mode menu 2 Touch NAVI The screen shows the picture of the navigation or press MODE button on the main unit repeatedly until NAVI mode is selected When your navigation unit is connected to AV1 or AV2 input of the AV control box set up AV1 AV2 ON and then select AV1 AV2 mode to watch the picture of the navigation The car navigation system is an optional item This unit only offers input for the system Rear View Camera Operation with Touch Keys Setting
Download Pdf Manuals
Related Search