Randell 4173SCA
Contents
1. e Never connect the unit to a power source while standing in water Wet hands and wet floors should be avoided when connecting any electrical appliance to a power outlet When a replacement part is required always insist on factory authorized parts When working on units equipped with casters depress caster brake to secure the unit in place In addition all Randell food service equipment is backed by some of the best warranties in the food service industry and by our professional staff of service technicians Retain this manual for future reference NOTICE Due to a continuous program of product improvement Randell Manufacturing reserves the right to make changes in design and specifica tions without prior notice NOTICE Please read the entire manual carefully before installation If certain recommended procedures are not followed warranty claims will be denied MODEL NUMBER SERIAL NUMBER INSTALLATION DATE randell com WHEN OPTIONAL 5 YEAR COMPRESSOR WARRANTY APPLIES 888 994 7636 Randell Manufacturing Service and Parts Hotline The serial number is located inside the display case cabinet Service and Parts Hotline 800 621 8560 Warranty Policies Congratulations on your purchase of a Randell manufactured piece of equipment Ran dell believes strongly in the products it builds and backs them with the best warranty in the industry Standard with every unit comes the piece of mind2. that this unit has been thoroughly engineered properly tested and manufacture to excruciating tolerances by a manufacturer with over 25 years of industry presence On top of that front end commit ment Randell has a dedicated staff of certified technicians that monitor our own technical service hotline at 1 800 621 8560 to assist you with any questions or concerns that may arise after delivery of your new Randell equipment 1 1 ear parts replacement of any and all parts that are found defective in material or workmanship 2 Free ground freight to customer specified location for all in warranty parts within continental U S 3 3 months 90 days labor reimbursement for any repairs that are caused by Randell s use of defective material or workmanship Reasonable geographic and industry rates do apply To request a warranty approval number call our Field Service Department at 1 888 994 7636 Randell will provide to the original customer that owns a Randell piece of equipment and has an optional compressor warranty with one of the following options 1 Provide reimbursement to servicing company for the cost of locally obtained replace ment compressor in exchange for the return of the defective compressor sent back freight prepaid Note Randell Manufacturing does limit amount of reimbursement allowed and does require bill from local supply hose where compressor was obtained customer should not pay servicing agent up front for compresso
3. OPERATORS MANUAL This manual provides information on Installation operating maintenance trouble shooting amp replacement parts for CURVED GLASS DISPLAY CASE 00 NOTIFY CARRIER OF DAMAGE ONCE It is the responsibility of the consignee to inspect the container upon receipt of same and to determine the possibility of any damage including concealed damage Randell suggests that if you are suspi cious of damage to make a notation on the delivery receipt It will be the responsibility of the consignee to file a claim with the carrier We recommend that you do so at once Information contained in this document is known to be current and accurate at the time of printing creation Unified Brands recommends referencing our product line websites unifiedbrands net for the most updated product information and specifications OMANUAL_CGDC 8 23 04 l UNIFIEDBRANDS FOODSERVICE EQUIPMENT SOLUTIONS a DOVER compare 1055 Mendell Davis Drive Jackson MS 39272 888 994 7636 fax 888 864 7636 randell com 888 994 7636 Table of Contents Congratulations 3 E ia Safety Procedures 4 OE ARE O I RO Serial Number Location Service and Parts Hotline page AO so air Randell Limited Warranty page 7 10 Unit Specifications 11 12 ica Unit Installation 13 cuni ei bll Ilie ela Unit Operation pace aiar Prevent
4. VER USE HYDROCHLORIC ACID MURIATIC ACID ON STAINLESS STEEL Proper maintenance of equipment is the ultimate necessity in preventing costly repairs By evaluating each unit on a regular schedule you can often catch and repair minor problems before they completely disable the unit and become burdensome on your entire operation For more information on preventive maintenance consult your local service com pany or CFESA member Most repair companies offer this service at very reasonable rates to allow you the time you need to run your business along with the peace of mind that all your equipment will last throughout its expected life These services often offer guarantees as well as the flexibility in scheduling or maintenance for your convenience Randel believes strongly in the products it manufactures and backs those products with one of the best warranties in the industry We believe with the proper maintenance and use you will realize a profitable return on your investment and years of satisfied service EASY TO FOLLOW TROUBLE SHOOTING CHART PROBLEM POSSIBLE CAUSE REMEDY A Refrigerator not running 1 Circuit breaker tripped 1 Reset 2 Power cord unplugged 2 Plug In 3 Thermostat turned off 3 Turn on 4 Unknown 4 Call service agency B Condensing unit operates for 1 Excessive heat load placed in unit 1 Allow unit sufficient time to remove heat long periods or runs continuously 2 Prolonged or too frequent door openings or door a
5. anization FOOTNOTES IN REFERENCE TO PARAGRAPHS ABOVE 1 Herein called Randell 2 NET means list price less discount warranty labor policy freight Randell delivery and other miscellaneous charges CASH DISCOUNTS WILL BE CALCULATED ON NET ONLY UNIT SPECIFICATIONS FOR CURVED GLASS SELF CONTAINED L Display area VOLT SHIP WT shelves sq ft or oer or fe er ro randell com Ea UNIT SPECIFICATIONS FOR CURVED GLASS REMOTE SE ll shelves sq ft 115 500 115 560 115 675 888 994 7636 UNIT SPECIFICATIONS FOR CURVED GLASS AMBIENT TESE shelves sq ft e e UNIT SPECIFICATIONS FOR CURVED GLASS DUAL TEMP Display area SHIP WT shelves sq ft for C KJ 888 994 7636 RECEIVING SHIPMENT LOCATING YOUR NEW DISPLAY MERCHANDISER ELECTRICAL SUPPLY DOOR INSPECTION Unit Installation Upon arrival examine the exterior of the shipping crate for signs of abuse It is advisable that the shipping crate be partially removed in order to examine the cabinet for any pos sible concealed damages are evident replace the crate in order to protect the unit during local delivery If the unit is damaged it should be noted on the delivery slip or bill of lading and signed to that effect A claim must be filed immediately against the carrier indicating the extent and estimated cost o
6. ansfer Failure to maintain this heat transfer will affect unit performance and eventually destroy the compressor Clean the condenser coils with coil cleaner and or a vacuum cleaner and brush NOTE Brush coil in direction of fins normally vertically as to not damage or re strict air from passing through condenser 2 Clean fan blade on the condensing 3 Clean and disinfect drains with a solution of warm water and bleach 4 Clean and disinfect drain lines and evaporator pan with a solution of warm water and bleach 5 Clean all gaskets on a weekly if not daily basis with a solution of warm water and mild detergent to extend gasket life 6 Do not wash interior mirrors with abrasive rag or cleansers NOTE DO NOT USE SHARP UTENSILS randell com IG 1 888 994 7636 PREVENTIVE MAINTENANCE cont RECOMMENDED CLEANERS FOR YOUR STAINLESS STEEL INCLUDE THE FOLLOWING detergent medallion sponge Ecoshine discoloration Impression the polish lines Grease fatty acids blood Easy off Degrease It Excellent removal on all and burnt on foods Oven Aid finishes Grease and oil Any good commercial Apply with a sponge detergent cloth Restoration Benefit and Super Good idea monthly Sheen Reverence Nickel Development Institute DiverseyLevr Savin Ecolab NAFEM Do not use steel pads wire brushes scrapers or chloride cleaners to clean your stainless steel CAUTION DO NOT USE ABRASIVE CLEANING SOLVENTS NE
7. ant that your unit has its own dedicated line Condensing units are designed to operate with a voltage fluctuation of plus of minus 10 of the volt age indicated on the unit data plate Burn out of a condensing unit due to exceeding voltage limits will void the warranty 1 Check doors to ensure that they are sealing properly 2 Check doors for proper alignment 3 Check doors to ensure that they open and shut freely randell com Ki Unit Installation cont INSTALLATION CHECKLIST After the final location of the display merchandiser has been determined refer to the fol lowing checklist prior to start up IG 888 994 7636 j 95 Check all exposed refrigeration lines to ensure that they are not kinked dented or rubbing together Check that condenser and evaporator fans rotate freely without striking any stationary members Unit must be properly leveled Plug unit in and turn on main power switch and or cold control Refer to the front of this manual for serial number location Please record this information in your manual on page 3 now It will be necessary when ordering replacement parts or requesting warranty service Confirm that unit is holding temperature Set controls to desired temperature for your particular ambient and altitude Allow your display merchandiser to operate for approximately 2 hours before putting in food This allows interior to cool down to the correct storage temperat
8. ative Maintenance 15 iaia ale Troubleshooting page ia Replacement Parts Congratulations on your recent purchase of Randell food service equipment and welcome to the growing family of satisfied Randell customers Our reputation for superior products is the result of consistent quality craftsman ship From the earliest stages of product design to successive steps in fabrica tion and assembly rigid standards of excellence are maintained by our staff of designers engineers and skilled employees Only the finest heavy duty materials and parts are used in the production of Randell brand equipment This means that each unit given proper maintenance will provide years of trouble free service to its owner SAFETY PROCEDURES e Always Disconnect power cord before attempting to work on or to clean equipment Turning the switch off is insufficient as the power remains live to the cabinet and can be a hazard Route the power cord so that it is not likely to be walked on or pinched by other appliances e Your unit is equipped with a grounded plug a plug with 2 blades and a grounding post Do not defeat the purpose of the plug by removing ground post or using an adapter without properly grounding the outlet Disconnect plug when the appliance will be idled for a long period of time Do not attempt to service this unit yourself as removing covers may cause unnecessary exposure to dangerous voltage
9. ent the item shows rough handling or visible damage to minimize liability a full inspection is necessary upon arrival A notation must be placed on the freight bill and signed for by the truck driver Appearance of damage will require removing the crate in the presence of the driver Consignee is responsible for filing of freight claims when a clear delivery receipt is signed Claims for damages must be filed immediately within 10 days by the con signee with the freight carrier Retain all cartons and merchandise for inspection Authorization for return must first be obtained from Randell before returning any mer chandise Any returned goods shipment lacking the return authorization number will be refused all additional freight costs to be borne by the returning party Returned equip ment must be shipped in original carton freight prepaid and received in good conditions Any returned merchandise is subject to a minimum handling charge consult factory for rate Equipment installation is the responsibility of the dealer and or their customer Dealer penalty clauses on their purchase order or contractually agreed to between the dealer and their clients are not binding on Randell Randell does not accept orders sub ject to penalty clauses This agreement supersedes any such clauses in dealer purchase orders All quotations for export sales will be handled by Dorian Drake International www doriandrake com Randell s export management org
10. f damage occurred The following conditions should be considered when selecting a location for your unit 1 Countertop load The countertop on which the display merchandiser will rest must be free of vibration and suitably strong enough to support the combined weights of the unit plus the maximum product load weight 2 Clearance There must be a combined total of at least 10 clearance at the top of the unit 3 Ventilation The air cooled self contained display merchandiser requires a sufficient amount of cool clean air Avoid placing the unit near heat generating equipment such as ovens ranges heaters fryers steam kettles etc and out of direct sunlight Avoid locating the make table in an ungrated room or where the room temperature may drop below 55 F or above 90 F The wiring should be done by a qualified electrician in accordance with local electrical codes A properly wired and grounded outlet will assure proper operation Please consult the data plate attached to the compressor to ascertain the correct electrical requirements Supply voltage and amperage requirements are located on the serial number tag NOTE It is important that a voltage reading be made at the compressor motor elec trical connections while the unit is in operation to verify that the correct voltage re quired by the compressor is being supplied Low or high voltage can detrimentally affect operation and thereby void its warranty NOTE It is import
11. jar 2 Make sure door is closed when not in use 3 Gasket not sealing 3 Adjust door or replace gasket 4 Dirty condenser coil 4 Clean coil 5 Evaporator coil frozen 5 Unplug unit defrost coil then adjust cold control to warmer position 6 Unknown 6 Call service agency C Unit is noisy 1 Check for loose compressor mounts 1 Tighten if necessary 2 Check fan motor mounts 2 Tighten if necessary 3 Check fan blades for obstructions 3 Remove any obstructions Tighten or adjust shrouds 4 Check all panels louvers and covers 4 Tighten and isolate as needed 5 Unknown 5 Call service agency D Temperature too high 1 Check power cord and circuit breaker 1 Plug in cord or reset breaker 2 Temperature control set too high 2 Adjust control 3 Dirty condenser coil 3 Clean coil 4 Evaporator coil froze 4 Unplug unit defrost coil then adjust cold control to warmer position 5 Unknown 5 Call service agency E Compressor runs but unit 1 Fan blades have encountered an obstruction 1 Check for obstruction and free fan blade not cooling 2 Unknown 2 Call service agency F Product freezing 1 Check thermostat 1 Replace or turn up 2 Unknown 2 Call service agency G Door will not close 1 Check opening for obvious obstruction 1 Remove any obstruction 2 Check self closing spring 2 Adjust or replace spring 3 Check for loose or worn hinges 3 Replace hinges H Unit leaks water 1 Check for blockage in drain 1 Clean evaporator pan and clea
12. n and cancelled are subject to a cancellation charge contact factory for details randell com STORAGE CHARGES SHIPPING amp DELIVERY DAMAGES RETURNED GOODS INSTALLATION PENALTY CLAUSES EXPORT POLICY 888 994 7636 Warranty Policies continued Randell makes every effort to consistently meet our customers shipment expectations If after the equipment has been fabricated the customer requests delay in shipment and warehousing is required 1 Equipment held for shipment at purchasers request for a period 30 days beyond original delivery date specified will be invoiced and become immediately payable 2 Equipment held beyond 30 days after the original delivery date specified will also include storage charges Randell will attempt to comply to any shipping routing or carrier request designated by dealer but reserves the right to ship merchandise via any responsible carrier at the time equipment is ready for shipment Randell will not be held responsible for any carrier rate differences rate differences are entirely between the carrier and puchaser Point of shipping shall be determined by Randell Weidman MI Tucson AZ At dealers request Randell will endeavor whenever practical to meet dealers request Freight charges to be collect unless otherwise noted All crating conforms to general motor carrier specifications To avoid concealed dam age we recommend inspection of every carton upon receipt In the ev
13. ndard domestic policy 3 AII electrical components operated on 50 cycle power are covered for 90 days from shipment only 4 Extended warranty options are not available from the factory 1 Maintenance type of repairs such as condenser cleaning temperature adjustments clogged drains unit leveling and gasket replacement or cleaning 2 Repairs caused by abuse such as broken glass freight damage or scratches and dents 3 Electrical component failure due to water damage from cleaning procedures Verbal quotations are provided for customer convenience only and are considered invalid in the absence of a written quotation Written quotations from Randell are valid for 30 days from quote date unless otherwise specified Randell assumes no liability for dealer quotations to end users Due to continued product improvement specification and product design may change without notice Such revisions do not entitle the buyer to additions Changes or replace ments for previously purchased equipment Certain areas require specific anitation requirements other than N S F amp U L standards Randell must be advised of these specifications before fabrication of equipment In these special circumstance a revised quotation may be required to cover additional costs Fail ure to notify Randell before fabrication holds the dealer accountable for all additional charges Orders canceled prior to production scheduling entered into engineering productio
14. r 2 Provide repair at the manufacturing facility by requiring that the defective unit be sent back to Randell freight prepaid Perform repair at the expense of Randell and ship the item back to the customer freight collect 3 Furnish a complete condensing unit freight collect in exchange for the return of the defective compressor sent back freight prepaid Decisions on whether or not to send complete condensing units will be made by Randell s in house service technician OWHEN OPTIONAL LABOR EXTENSION POLICY APPLIES WHEN EXPORT WARRANTIES APPLY ITEMS NOT COVERED UNDER WARRANTY QUOTATIONS SPECIFICATION amp PRODUCT DESIGN SANITATION REQUIREMENTS CANCELLATIONS Warranty Policies continued Randell Manufacturing will provide reimbursement of labor invoiced to any customer that has an optional labor extension of our standard warranty Reasonable geographic and industry rates do apply Randell offers both 1 and 2 year extensions Labor exten sions begin at the end of our standard warranty and extend out 9 months to 1 calendar year or 21 months to 2 calendar years from date of purchase Please contact Randell Manufacturing s technical service hotline at 1 800 621 8560 for details and warranty authorization numbers 1 Randell Manufacturing covers all non electrical components under the same guide lines as our standard domestic policy 2 All electrical components operated on 60 cycle power are covered under our sta
15. r drain 2 Check for cracked drain pan 2 Inspect and replace if necessary 3 Check for level 3 Level unit 4 Check for loose or disconnected drain hose 4 Tighten or reconnect hose randell com IG CURVED GLASS DISPLAY 4100 SERIES UNIT 4149 4161 4173 4137DT 4149DT Cold Control HD CNT200 HD CNT200 HD CNT200 HD CNT200 HD CNT200 Light Bulb EL TUB018 EL TUB0306 EL TUB0306 EL TUB9801 EL TUB030 Light Fixture EL LGT049 EL LGT0306 EL LGT0306 N A EL LGT061 2 073 1 Bottom Shelf HD SHL186 2 Shelf Pilaster RH HD RCK9803 RH Door HD DOR9901R Door Lock HD LCK026 HD LCK026 Frame HD Wiper Gasket IN GSK600 RH Bumper IN GSK601 LH Bumper IN GSK602 HD BMP0008 Shelf Support RP SPT9902 Condensing Unit RF CON9803 CON0202 Compressor RF CONO104P Evap Motor EL 0230 Fan Bracket RP BRK1050 Front Louver RP LVR9949 Rear Louver RP LVR9950 Switch EL SWT1451 21 ELSWT1451 21 EL SWT1451 21 Front Glass HD GLS049 Front Glass RP GCR049 RP GCRO61 RP GCR073 RP GCR037 RP GCR049 Cover ALL QUANTITIES ARE 1 EXCEPT FOR THOSE MARKED 2 NOTE OLD LIGHT SINGLE POST NOTE NEW LIGHT DOUBLE POST o IG 888 994 7636
16. ure NOTE All motors are oiled and sealed After installing unit in final location make sure counter surface is clean and seal around base perimeter with silicone adhesive to eliminate spillage of liquid from getting under base FIGURE A Temperature control adjustments The temperature control allows for temperature adjustments Turning the adjustment knob clockwise will result in increased cooling Turning it ti far clockwise can result in freeze up while turning it counterclockwise to far will shut the compressor off If your cabinet temperature is to warm adjust temperature control Unit Operation Your display merchandiser s temperature is adjusted by a cold control It is important to keep the doors closed as much as possible This is especially important in the summer and when ambient temperatures exceed 80 F to help reduce the chance of condensation forming on the glass and to increase the efficiency of the merchandiser NOTE Even though your display case was designed for heavy use excessive door openings should be avoided in order to maintain proper box temperature and eliminate the possibility of coil freeze up PREVENTIVE MAINTENANCE Randell strongly suggests a preventive maintenance program which would include the following Monthly procedures 1 Cleaning of all condenser coils Condenser coils are a critical component in the life of the compressor and must remain clean to assure proper air flow and heat tr
Download Pdf Manuals
Related Search