Home

ATI ALL-IN-WONDER X600 PRO, Graphic Card

1. For detailed instructions on how to use your ATI product refer to the Online User s Guide included on your ATI installation CD ROM If you require further assistance with your product the following Customer Care options are available Service Availability Access Cost Online 24 7 ati com online customercare Complimentary Telephone US amp 9 00am 7 00PM EST 1 905 882 2626 Complimentary to Canada Monday to Friday registered users Toll charges may apply Telephone US amp 9 00am 7 00PM EST 1 900 733 2841 1 25 perminute Canada Priority Monday to Friday subject to change Service without notice Telephone US amp Canada Priority 9 00am 7 00PM EST Monday to Friday 1 877 284 7379 19 95 per incident subject to change Pay Per without notice Incident Europe and 10 30am 7 00 PM GMT 49 1803 347345 Complimentary to Other Regions Monday to Friday registered users else US 19 95 per incident subject to change without notice Toll charges to Germany may apply Mail ATI TECHNOLOGIES INC Attention Customer Care 1 Commerce Valley Drive East Markham Ontario Canada L3T 7X6 Complimentary 6 Warranty Information ATI Customer Care will work to resolve your issue and help you to get your ATI product up and running If your issue is not resolved our technicians will determine whether the difficulty you are experiencing is the result of the ATI product wheth
2. PC speaker connection optional Line In to sound card Dolby Digital AC 3 Amplifier S PDIF connection Cable TV connection Cable FM Radio connection 18 Input and Output Adapters To display your PC output on a high definition TV Use the optional ATI output adapter to connect a high definition TV to your ALL IN WONDER X600 Series card as shown Input Output Adapter 6 ALL IN WONDER X600 Series card Optional ATI HD Output Adapter Cables with RCA plug at each end available separately from a consumer electronics dealer Input and Output Adapters 19 Typical HDTV video inputs Note Input and output cable lengths should not exceed 50 feet 15m Y Green Pb Blue Pr Red Cable with mini stereo plug at each end available separately from a consumer electronics dealer for connecting PC speakers optional LINE IN to sound card Dolby Digital AC 3 Amplifier Cable with RCA plug at each end available separately from a consumer electronics dealer 8 S PDIF connection 20 Input and Output Adapters Compatibility with earlier ALL IN WONDER products If you have input and output devices connected to an earlier ALL IN WONDER product the input output adapter included with your ALL IN WONDER X600 Series card lets you easily re attach those devices ATI Input Adapter used with earlier ALL IN WONDE
3. oY a ATI Displays Tab Troubleshoot ATI Displays Tab Scheme Displays the drop down list of available display device configurations that have previously been created New configurations can be entered here and then saved using the Save button Hotkey Associates a hotkey with a scheme To input the hotkey highlight the field and press the appropriate key combination on your keyboard Save button Saves display device configuration schemes Delete button Deletes display device configuration schemes Display buttons Enables or disables a display device they also indicate whether a device is enabled or disabled 30 ATI Displays Tab ATI Displays Tab Troubleshoot Opens a Troubleshoot dialog to assist with possible button display problems To enable or disable a display If the enable disable button is green it indicates the device is enabled If it is red it indicates the device is disabled If the button is greyed out the device is not an option For example if there is only one monitor connected all buttons will be grey Click the enable disable button r for the display device you want to enable disable Click OK or Apply to save the changes Note Due to power restrictions you can normally only have two devices active at the same time for example two monitors or a monitor and a TV To save a display device scheme Display device selections can be saved as a schem
4. ALL IN WONDER X600 Series Installation and Setup User s Guide P N 137 70865 10 Copyright 2004 ATI Technologies Inc All rights reserved ATI and ATI product and product feature names are trademarks and or registered trademarks of ATI Technologies Inc All other company and or product names are trademarks and or registered trademarks of their respective owners Features performance and specifications are subject to change without notice Product may not be exactly as shown in diagrams Reproduction of this manual or parts thereof in any form without the express written permission of ATI Technologies Inc is strictly prohibited Disclaimer While every precaution has been taken in the preparation of this document ATI Technologies Inc assumes no liability with respect to the operation or use of ATI hardware software or other products and documentation described herein for any act or omission of ATI concerning such products or this documentation for any interruption of service loss or interruption of business loss of anticipatory profits or for punitive incidental or consequential damages in connection with the furnishing performance or use of the ATI hardware software or other products and documentation provided herein ATI Technologies Inc reserves the right to make changes without further notice to a product or system described herein to improve reliability function or design With respect to ATI products which
5. 1 Select a hotkey combination from the Assigned Hotkey text box 2 Click Remove Note Assigning a new combination to an action with an existing combination will overwrite the existing one To disable hotkeys so that you do not accidentally activate them for example click the Disable Hotkeys checkbox If you plan to use hotkeys make sure this box is unchecked The easiest way to apply your own color settings from within a full screen 3D application is to create a Full Screen 3D profile and save it assign hotkeys for the Load Current Profile action through the Hotkeys dialog make sure that the profile you prefer is selected from the drop down list box and click OK Once inside the 3D application use the hotkeys to trigger the profile ATI Options Tab The ATI Options tab provides detailed driver information and access to your graphics card s versioning and specifications You can also enable or disable the ATI taskbar icon from this dialog ATI Options Tab 39 SMARTGART tm 3D VPU Recover General Adapter Monitor Troubleshoot Color Management Displays Color Options Rotation Overlay Version Information CATALYST Version 02 2 2D Version 6 14 10 6451 Packaging Version 8 02 040501 n 015040E ATI Details lt I lt I lt I Re activate all warning messages Enable ATI taskbar icon application Show ATI icon on taskbar Disable quick resolution feature Reduce DVI frequency on high resolution display
6. Click the Defaults button to reset the values to their default settings ATI Overlay Tab 43 SMARTGART tm 3D YPU Recover General Adapter Monitor Troubleshoot Color Management Displays Color Options Rotation Overlay Overlay Adjustments Brightness _ Contrast x Saturation ne mode options ATI Overlay Tab ATI Overlay Tab Brightness Adjusts the brightness of the video image Contrast Adjusts the contrast in the video image Saturation Adjusts the vividness of the color Sliding it all the way to the left removes all color and produces a black and white picture Hue Adjusts the pureness or tint of the red green and blue components of the color Gamma Adjusts the overall intensity of the video image Clone mode Accesses Clone Mode overlay settings These settings options only apply to video content when viewed in dual controller Clone mode For more information see the Clone Mode Settings section Defaults button Resets the Overlay settings to default values 44 ATI Overlay Tab ATI Overlay Tab Theater Mode Displays video playback in full screen on a secondary monitor if available and enabled Clone Mode Settings Clone Mode Options are available under the following conditions e Your ATI graphics accelerator has dual controllers to support Primary and Secondary Clone displays e Your ATI video adapter has dual display functionalit
7. Operating e Windows XP Service Pack 1 and Service Pack 2 System Windows XP e Windows 2000 with Service Pack 1 or later Monitor e High resolution MultiSync or multi frequency monitors or any other type of VGA monitor e Digital flat panel DFP displays or digital CRT display Before You Begin Before you begin installing your ALL IN WONDER X600 Series product please do the following Record Your Serial and Part Numbers The serial number and 102 part number printed on the graphics card are required for registration They are located on a sticker on the back of the card Qo 000000 000000 1028360100 1 Serial number S N 102 part number P N Record Your Serial and Part Numbers 3 Write these numbers down before installing your new ATI product Uninstall Previous Graphics Card Drivers To ensure the successful installation of your new ALL IN WONDER X600 Series card you must uninstall the drivers for the existing graphics card before removing it from your computer To uninstall previous drivers With your current graphics card still in your computer 1 Close all applications that are currently running 2 Navigate to the Control Panel and select Add Remove Programs 3 Select your current graphics card drivers and select Add Remove The wizard will help you remove your current display drivers Note If the previously installed graphics card has any additional software installed
8. Properties gt Advanced gt Displays gt Adjustments tune the position of the picture on the screen via the video signal e Set the monitor s RGB inputs and sync switches if this option is available to 75 Ohms with the sync set to external Digital Flat Panel DFP monitor users refer to your monitor s documentation for the appropriate cable and connector to plug into the DVI I connector on the graphics card Operating e Check the driver installation and make sure that all System Warns software is correctly loaded corresponding to your that Video Card operating system and applications Isn t Properly Re install the ATI drivers for your ALL IN WONDER Configured X600 Series card Solution Selector 69 HDTV HDTV Adapter Troubleshooting Problem Possible Solution The colors on my TV display are incorrect Ensure that the connections between the Component Video Adapter and your HDTV are correct Y Green Pb Blue Pr Red There is no display on my TV Your TV will not display anything until Windows starts this may take several minutes Set your TV to YPbPr input Ensure that the HDTV Component Video Adapter is properly connected then restart your computer DVDs will not play in 720p or 1080i modes Copy protected DVDs restrict playback to 480i and 480p modes I can t see the entire display If your component input device supports it try 720p mode The display appea
9. size of grounding conductors location of antenna discharge unit connection of grounding electrodes and requirements for the grounding electrode Lightning For added protection for this product during a lightning storm or when it is left unattended and unused for long periods of time unplug it from the wall outlet and disconnect the antenna or cable system This will prevent damage to the product due to lightning and power line surges Power Lines An outside antenna system should not be located in the vicinity of overhead power lines or other light or power circuits or where it can fall into such power lines or circuits Antenna Installation When installing an outside antenna system extreme care should be taken to keep from touching such power lines or circuits as contact with them may be fatal Note to CATV System Installer This reminder is provided to call the CATV systems installer s attention to Section 820 40 of the NEC which provides guidelines for proper grounding and in particular specifies that the cable ground shall be connected to the grounding system of the building as close to the point of cable entry as practical Contents Getting Started 1 System Requirements Before You Begin Record Your Serial and Part Numbers Uninstall Previous Graphics Card Drivers ND D ND Available Resources Using the Digital User s Guide Getting Additional Accessori
10. Technology Equipment EN55024 1998 CISPR 22 1997 Information Technology Equipment Immunity Characteristics Limits and Methods of Measurement Low Voltage Directive for TV Tuner E quipped products 73 23 EEC The Low Voltage Directive EN 60950 1992 A1 A2 A3 A4 Safety of Information Technology Equipment L Information de conformit de la CE Directive EMC 89 336 CEE et amendement 92 31 CEE et 93 68 EEC dispositif num rique de Classe B EN 55022 1998 CISPR 22 1997 Class B Limites et m thodes de mesure des caract ristiques d interf rences radiophoniques Mat riel des technologies de l information EN 55024 1998 CISPR 24 1997 Limites et m thodes de mesure des caract ristiques d immunit Mat riel des technologies de l information E quipement de Technologie de l Information Caract ristiques d immunit Limites et m thodes de mesure Directive de Basse Tension pour produits contenir tuner de t l vision 73 23 CEE Directive basse tension EN 60950 1992 A1 A2 A3 A4 S curit du mat riel des technologies de l information CE befolgunginformationen EMC Richtlinie 89 336 EEC und nderungen 92 31 EEC und 93 68 EEC Digitales Ger t der Klasse B EN 55022 1998 CISPR 22 1997 Klasse B Grenzwerte und MeRverfahren fur F unkstorungen von Einrichtungen der Informationstechnik EN 55024 1998 CISPR 24 1997 Einrichtungen der Informationstechnik Storfestigkeitseigenschaften Grenzwerte und Pr fverfahren N
11. appropriate prompt insert the ATI Installation CD to load the drivers for your ALL IN WONDER X600 Series card To set up a multi monitor display 1 Q From the Start menu click Control Panel then Display Click the Settings tab to access the basic multi monitor configuration settings Note ATI software provides many additional configuration features that can be accessed by clicking the Advanced button from the Display Properties gt Settings tab Select the Monitor icon identified by the number 2 Click Extend my Windows desktop onto this monitor Set the Screen Resolution and Color Quality as appropriate for the second monitor Click Apply or OK to apply these new values e Refer to your Windows online help and documentation for further information on using the Settings tab Note When you use multiple monitors with your card one monitor will always be Primary Any additional monitors will be designated as Secondary Display Configurations 61 Display Configurations Your ALL IN WONDER X600 Series graphics card provides dual display functionality and TV Out The following table lists the different ways you can connect displays to your card Display Configuration Connector s Used Comments Single CRT VGAconnectorOR CRT cathode ray tube analog display display DVI I connector with DVI I to VGA adapter Single DFP DVI I connector DFP digital flat panel display di
12. correct drive letter Click OK A Click Install under Software Install Click Next O NOO Click Yes to the license agreement Solution Selector 67 9 Click ATI Easy Install to begin the Installation Wizard 10 Follow the Wizard s on screen instructions to complete the installation Note The Express installation option is recommended If your ATI Graphics Accelerator card includes a multimedia component the software for that component will automatically be installed along with the ATI graphics driver Not all software components are installed using the Express installation Custom installation allows you to select individual software components for installation Solution Selector General Problems Problem Possible Solution Computer Does e Verify that the installation instructions were properly Not Boot Up followed Properly Check that the card is properly installed in your system and connected to your monitor If you have problems during start up restart your computer in Safe Mode While starting Windows 2000 and Windows XP press and hold F8 until you see the Windows Advanced Options Menu Use the arrow keys to select Safe Mode and press Enter e Check the system configuration utility of your operating system for the interrupt assignments e Contact ATI s Customer Care or your local technical support No Display e Check that the card is seated properly in its expansion slot e
13. it should also be removed at this point 4 Restart your system after the drivers have been removed 4 Using the Digital User s Guide Available Resources This chapter tells you where to find your user s guide where to get additional accessories how to register your product and warranty and compliance information Using the Digital User s Guide Your ATI graphics card comes complete with a User s Guide in Portable Document Format PDF The User s Guide describes in detail the features and functions of your ATI graphics card and the associated software You will need Adobe Reader software available from www adobe com To open the User s Guide 1 Insert the ATI Installation CD ROM into your CD ROM drive 2 If Windows runs the CD ROM automatically proceed to step 6 3 Click Start gt Run 4 Type the following D ATISETUP If D is not your CD ROM drive substitute the correct drive letter Click OK Q Click Documentation 7 Click User Guides Getting Additional Accessories Additional and replacement cables installation CD ROMs manuals and other accessories for ATI products can be purchased from the online ATI store at ati com online accessories Product Registration To receive Customer Service you must register your product with ATI within 30 days of purchase An Online Product Warranty Registration form is available at ati com online registration Customer Care Customer Care 5
14. screen 3D application Changing the gamma alters the curvature of the color curve Brightness slider Increases or decreases the color brightness of your Desktop or full screen 3D application Changing the brightness adjusts the vertical position of the color curve Contrast slider Increases or decreases the color contrast of your Desktop or full screen 3D application Changing the contrast adjusts the slope of the color curve Reset buttons Restores an individual slider setting to its default value Click Apply or OK to save Color preview box The color image indicates visually how the Gamma Brightness and Contrast sliders affect the final color settings of your display device In Desktop mode clicking on this with your mouse pointer will change the image Hotkeys button Opens the Color Hotkeys Settings dialog There you can assign hotkeys for adjusting your color settings within a full screen 3D application environment To activate this button you must select the Full Screen 3D radio button Defaults button Restores all of the color settings to the default values Click Apply or OK to save To create a Desktop or Full Screen 3D profile 7 Choose either the Desktop or Full Screen 3D radio button as desired ATI Color Tab 35 2 Adjust the Gamma Brightness and Contrast sliders to the desired settings either individually or using the All Colors checkbox 3 Type a profile name in th
15. this document relates ATI disclaims all express or implied warranties regarding such products including but not limited to the implied warranties of merchantability fitness for a particular purpose and non infringement Product Notices Dolby Laboratories Inc Manufactured under license from Dolby Laboratories Confidential Unpublished Works 1992 1997 Dolby Laboratories Inc All rights reserved Macrovision Apparatus Claims of U S Patent Nos 4 631 603 4 577 216 4 819 098 and 4 907 093 licensed for limited viewing uses only This product incorporates copyright protection technology thatis protected by method claims of certain U S patents and other intellectual property rights owned by Macrovision Corporation and other rights owners Use of this copyright protection technology must be authorized by Macrovision Corporation and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation Reverse engineering or disassembly is prohibited Documentation Updates ATI is constantly improving its product and associated documentation To maximize the value of your ATI product you should ensure that you have the latest documentation ATI s documentation contains helpful installation configuration tips and other valuable feature information IMPORTANT SAFETY INSTRUCTIONS Read Instructions All the safety and operating instructions should be read before the product i
16. Ensure that the monitor cable is securely fastened to the card e Make sure that the monitor and computer are plugged in and receiving power e f necessary disable any built in graphics capabilities on your mother board For more information consult your computer s manual or manufacturer Note some manufacturers do not allow the built in graphics to be disabled or to become the secondary display e Make sure that you selected the appropriate monitor when you installed your enhanced driver ATI Technologies 68 Solution Selector General Problems Problem Possible Solution Screen Defects e Check if your monitor supports the resolution Appear horizontal kHz and vertical Hz refresh rates as required by the graphics card e Check your current resolution refresh rate and color depth settings in the Settings and Monitor tabs in your Display Properties dialog Warning Ensure that both video card and monitor support resolution and refresh rates you select Incompatible resolution refresh rate selection may result in monitor damage Refer to your monitor s documentation for recommended resolutions and refresh rates Off Center e Try adjusting the brightness sharpness contrast and Screen Image color balance controls of your monitor Odd Colors or No Try adjusting the centering and positioning controls of Picture your monitor to position the picture on the screen Note The Screen Position settings in Display
17. Multimedia Center and then select the feature you want to run For information on the ATI Multimedia Center see the User s Guide and the online help The first time you launch TV you must complete the Initialization Wizard which guides you through setting up TV After that the Wizard will not run unless you want to re run it Introduction 27 CHAPTER 4 ATs CATALYST Software Suite Introduction This chapter describes using the advanced multiple monitor and 3D graphics features in ATT s CATALYST Software Suite The ATI REMOTE WONDER software is automatically installed with the CATALYST Software Suite See the ATT REMOTE WONDER Installation Guide for installation instructions Features Multiple Displays and 3D Gaming ATT s CATALYST Software Suite provides multiple display functionality and its advanced graphic features such as SMARTSHADER HD provide the ultimate 3D gaming experience The CATALYST Software Suite also supports the latest versions of Direct 3D and OpenGL Many 3D game titles will virtually come to life through the advanced Direct 3D or OpenGL features Gamers can fine tune these settings for the ultimate experience in 3D image quality or 3D gaming performance HYDRAVISION In addition to the multiple display functionality available with ATI s CATALYST Software Suite you can also use HYDRAVISION for advanced multi monitor management For more informati
18. R products TV F connector for cable TV input FM F connector for cable FM radio input Input connector Oo e ATI Output adapter used with earlier ALL IN WONDER products Input and Output Adapters 21 O Input Output connector ALL IN WONDER X600 Series card 22 Input and Output Adapters Installing Drivers and Software in Windows 23 CHAPTER 3 Installing Software This chapter will guide you through the installation of the drivers and software associated with your ALL IN WONDER X600 Series card Installing Drivers and Software in Windows You will need to install the ALL IN WONDER X600 Series drivers and software in the following cases e After you have installed the card in your system e After you have reinstalled or upgraded your operating system This procedure applies to Windows 2000 and Windows XP Software Installation Prerequisites To install or remove the drivers you must have administrator rights or be logged on as a user with administrator rights Your operating system must be installed and running before you can install the ALL IN WONDER X600 Series drivers You must also have Service Pack 1 or higher for Windows 2000 or Windows XP installed Make sure your monitor cable is properly attached before you begin Note The installation dialog will display in English if your operating system s language is not supported To inst
19. T tm 3D YPU Recover General Adapter Monitor Troubleshoot Color Management Displays Color Options Rotation Overlay Rotation Standard Landscape 0 Rotate 90 Right Rotate 180 Rotate 90 Left j 7 Mouse tracks rotation ATI Rotation Tab ATI Rotation Tab 41 ATI Rotation Tab Rotation buttons Rotates the display by the preset amount Configure Lists the rotation actions with which you can associate a Hotkeys drop hotkey down list Hotkey field Associates a hotkey with a rotation To input the hotkey click on the field and press the appropriate key combination on your keyboard Save button Saves a hotkey setting Defaults Restores the default hotkey settings Mouse tracks When selected rotates the mouse pointer to match the rotation display image settings When deselected the mouse checkbox pointer will move relative to the Standard Landscape view regardless of display rotation To rotate a single display 1 2 3 Select one of the four rotation settings by clicking the appropriate button Optionally check the Mouse Track Rotation checkbox to have the mouse pointer match the display image Click OK or Apply To rotate multiple displays 1 Select the Settings tab in the Windows Display Properties dialog Select the display to which you want to apply the rotation Click the Advanced button and select the Rotation tab Select one of th
20. WONDER X600 Series graphics card 12 Detailed Installation 1 ALL IN WONDER X600 Series Graphics Card Installing the Card 1 Turn off the computer monitor and other peripheral devices 2 Unplug the computer s power cord and disconnect all cables from the back of your computer WARNING Wait approximately 20 seconds after unplugging the power cord before disconnecting a peripheral or removing a component from the motherboard to avoid possible damage to the motherboard 3 Remove the computer cover If necessary consult your computer s manual for help in removing the cover Detailed Installation 13 WARNING Remember to discharge your body s static electricity by touching the power supply or the metal surface of the computer chassis 4 Unscrew or unfasten and remove any existing graphics card from your computer Note If your computer has an on board graphics capability you may need to disable it on the motherboard For more information see your computer documentation 5 Locate the appropriate slot and if necessary remove the metal back plate cover 6 Align your ATI graphics card with the slot and press it in firmly until the card is fully seated 7 Screw in or fasten the graphics card securely Make sure the cables are not interfering with anything inside the computer for example a cooling fan and replace the computer cover 8 Reconnect any cables you have disconnected and plug in the
21. all ATI drivers and software 1 Start your system When the Found New Hardware Wizard comes up click Cancel When the System Settings Change window asks you to restart your computer click No 2 Run the ATISETUP utility The ATISETUP utility will start automatically if you insert the ATI Installation CD ROM into your CD ROM drive after the operating system has started If your CD ROM auto run is not enabled or the ATISETUP utility does not start automatically 24 HYDRAVISION Multi monitor Management a Click the Start button in the task bar b Click Run c Select ATISETUP EXE from the root directory of the ATI Installation CD ROM d Click OK 3 Click Install under Software Install 4 Click Next 5 Click Yes to the license agreement ATI Easy Install will start the Installation Wizard 6 Follow the wizard s on screen instructions to complete the installation Note The Express installation option is recommended The HYDRAVISION multi monitor and desktop management software will automatically be installed along with the ATI driver by selecting this option Not all software components are installed using the Express installation Custom installation allows you to select individual software components for installation 7 When the Setup complete message appears select Yes want to restart my computer now and click Finish 8 After the system reboots the Found New Hardware message may display the Digital Signatur
22. ation Preference Anisotropic Filtering Method Application Preference Texture Preference High Quality Mipmap Detail Level High Quality Wait for Vertical Syne Application Preference TRUFORM tm Always Off Profiles for Direct3D Current Profile Zi J dee J Compatibility j Defaults j ATI 3D Tab ATI 3D Tab 3D Settings for Selects either Direct 3D or OpenGL as the radio buttons format to be altered in the workspace Performance Quality Controls the overall performance image quality of slider your graphic application Moving the slider to the left will maximize application performance while moving the slider to the right will maximize image quality Use Custom Settings When Use Custom Settings is checked the checkbox Performance Quality slider is disabled and the Custom button is enabled Using custom settings is recommended for advanced users only Custom button Opens the Custom Properties dialog Using custom settings is recommended for advanced users only For more information refer to the Custom Properties Dialog section ATI 3D Tab 47 ATI 3D Tab Current Settings Shows the current settings for either Direct 3D or OpenGL whichever is selected Profiles for Allows you to save a unique profile of the custom settings you have selected Once you have completed making your custom settings click OK in the Custom Properties dialog Enter a name in Current Profile a
23. computer s power cord Note Before turning your computer on again connect the appropriate display devices Connecting Display Devices The following connections are available e VGA for standard VGA monitors e DVI I for digital flat panel displays You can connect an analog CRT display using an optional DVI I to VGA adapter as shown below VGA DVI I TO DVI I CONNECTOR VGA CONNECTOR FROM ADAPTER ON CARD MONITOR 14 Input and Output Adapters Turning on the System WARNING Turn on your monitor before you turn on your computer Failure to do so could damage your monitor If you have properly installed your graphics card operating system messages will appear once the boot procedure is finished Your monitor will be running in a basic video mode Higher refresh rates are not available at this stage of the installation Once you have installed the ALL IN WONDER X600 Series drivers and software you can use the Display Properties dialog to adjust the video settings and configure multiple monitors Input and Output Adapters Your ALL IN WONDER X600 Series uses input and output adapters that let you connect audio and video devices to the card for example TV VCR or camcorder To hear sound when you use your ALL IN WONDER X600 Series card s TV feature ensure that the ALL IN WONDER card s audio output cable is connected to your sound card s line in connector To watch movies on your PC o
24. d mode you can make slider adjustments or select a different profile on the Color tab then switch back to full screen mode to see the effects immediately Color Hotkeys Settings Some full screen 3D applications automatically load their own color settings rather than those set through the ATI Color tab If you want to force the application to use your custom settings you can preconfigure hotkey combinations to either adjust the individual color properties or apply profiles you have created from within the 3D application This control is accomplished through the Color Hotkeys Settings dialog of the Color properties tab Properties n Color Hotkeys Settings Modifier key Hotkey Hotkey action Decrease Gamma Increase Brightness Decrease Brightness Increase Contrast Shift Alt Ctrl Decrease Contrast Update Current Profile Next Profile v D _ ear ina Drafila Assigned hotkeys Remove j M Disable hotkeys Color Hotkeys Settings Dialog Color Hotkeys Settings 37 Color Hotkey Settings Modifier key In combination with the Hotkey specifies the hotkey combination that triggers an action The Modifier key can be any combination of Alt Ctrl or Shift Note that the Shift key is never used alone Hotkey In combination with the Modifier key specifies the hotkey combination that triggers an action Hotkey can be any key listed To avoid conflicts be aware of any hotkeys or keyboard controls that ma
25. display to turn off automatically or become scrambled the PC monitor will not be affected Your TV display will be restored once you exit the game or if you restart your computer CHAPTER 6 Using Multiple Displays Connecting Your Monitors Your ALL IN WONDER X600 Series provides hardware support for one DVI I monitor or two VGA monitors using the optional DVI I to VGA adapter A TV can also be used to expand your desktop by using the S Video out Connections and Adapters for the ALL IN WONDER X600 Series Card 1 Standard VGA Monitor Connector To connect a VGA monitor to the DVI I connector plug the supplied DVI I to VGA adapter into the DVI I connector then plug your monitor cable into the adapter 2 Optional DVI l to VGA Adapter Connections and Adapters for the ALL IN WONDER X600 Series Card DVI I Backplate Connection To connect a flat panel plug the monitor s DVI I connector into the DVI I connection Note If you use multiple monitors the ALL IN WONDER X600 Series card must be the primary graphics card Normally the system BIOS determines which graphics card will be the primary To connect your monitors 1 2 3 4 Turn off your computer and monitors Plug the monitor cables into their appropriate connectors Turn on your monitors first and then restart your computer so that Windows can detect the new hardware settings When the New Hardware Found Wizard appears at the
26. e Not Found message Click Yes or Continue to complete the driver installation HYDRAVISION Multi monitor Management The HYDRAVISION multi monitor and desktop management software will install automatically with the Express driver installation of the ATISETUP utility If you do not want to install HYDRAVISION select the Custom driver installation and clear the HYDRAVISION check box For more information concerning HYDRAVISION consult the user s guide included on the ATI Installation CD ROM Monitor Configuration 25 Monitor Configuration Once the drivers and software have been installed you can configure your monitor To configure your primary display 1 Navigate to the Control Panel and choose Display or right click on the desktop and choose Properties 2 Choose the Settings tab and select a screen resolution and color depth that best suit your requirements and your monitor s performance 3 Click the Advanced button and select the Monitor tab 4 Choose a refresh rate from the drop down list WARNING Choosing a refresh rate unsupported by your monitor may damage your monitor Consult your monitor s documentation if necessary 5 Click OK until you return to the desktop Reinstalling Drivers The software installation procedure detailed in this chapter describes how to install the drivers for your graphics card after you have installed a new card for the first time and have rebooted your compu
27. e Profile list box 4 Click Save To apply the settings for a specific Desktop profile 1 Choose the Desktop radio button 2 Select the profile name from the drop down list box 3 Click Apply or OK To apply the settings for a Full Screen 3D profile 1 Choose the Full Screen 3D radio button 2 Select the profile name from the drop down list box 3 Click Apply or OK 4 Start your 3D application in full screen mode Hotkeys Some 3D applications automatically load their own color settings rather than those set through the ATI Color tab To use custom settings you can preconfigure hotkey combinations to either adjust the individual color properties or apply profiles you have created once the 3D application is running To access the Color Hotkeys Settings dialog 1 Select the Full Screen 3D radio button 2 Click the Hotkeys button to access the Color Hotkeys Settings dialog The easiest way to apply your own color settings from within a full screen 3D application is to create a Full Screen 3D profile and save it assign hotkeys for the Load Current Profile action through the Hotkeys dialog make sure that the profile you prefer is selected from the drop down list box and click OK Once inside the 3D application use the hotkeys to trigger the profile 36 Color Hotkeys Settings Some 3D applications allow you to switch easily between full screen mode and windowed mode and do not load their own color settings In windowe
28. e Settings 44 ATI 3D Tab 45 Custom Properties Dialog 48 Direct 3D Compatibility Settings 51 OpenGL Compatibility Settings 52 ATI VPU Recover Tab 53 Using TV Display and Capture Features 55 Using TV Out 55 Viewing Your PC s Display ona TV 55 Connecting toa TV or VCR 55 Starting Windows with TV Display Enabled 55 Using and Adjusting TV Display Features 56 TV Display Hardware Restrictions 56 Using a Monitor vs Using TV Display 56 Adjusting Monitor Display 56 Viewing Text ona TV 57 Reducing Edge Distortion 57 Using TV Display Alone 58 Using Games and Applications 58 Using Multiple Displays Connecting Your Monitors Display Configurations MULTVIEW MULTVIEW audio requirements EAZYLOOK Troubleshooting Uninstalling Old Graphics Card Software Windows New Hardware Found Installing the CATALYST Software Suite Solution Selector Index 73 CHAPTER 1 Getting Started Welcome to the convergence of your PC TV and video This new technology changes the way you view TV graphics and video on your PC The ALL IN WONDER family of cards are powerful TV tuners DVD players Personal Video Recorders and 2D amp 3D graphics and video accelerators Their features will take your PC s graphics and video capabilities to the next level TV ON DEMAND and TV Listings enhance your television experience Using an attached video camera the ALL IN WONDER family provid
29. e button 024 or disable button D accordingly Click OK or Apply to save the changes Using and Adjusting TV Display Features For information about how to adjust TV display features right click the ATI taskbar icon point to Help then point to ATI Television Display TV Display Hardware Restrictions A TV cannot be left connected to the graphics card if two analog monitors are connected to your ALL IN WONDER X600 Series card even if the TV is off and not enabled in the software Similarly an analog monitor connected to the DVI I connector should not be left connected to your ALL IN WONDER X600 Series card when TV Out is enabled In both cases your ALL IN WONDER X600 Series will become overloaded resulting in a dim image on all devices Using a Monitor vs Using TV Display Using your TV for your computer s display can be useful however the display on your monitor may change or looked squashed This distortion occurs because the display adjusts to fit the dimensions of your TV To correct the monitor s display use the monitor s control buttons to adjust its display size and position Some single frequency monitors may not work with TV display enabled If you experience problems when TV display is enabled disable TV display to restore your monitor s display Adjusting Monitor Display The size of the display on your monitor may become smaller and not perfectly centered when you have TV display enabled These eff
30. e for quick recall 2 3 Click the enable disable button ey for the display devices you want to have active Type a name into the Scheme drop down list field Click Save to save the scheme Dynamic Display Reassignment You can change the assignment of your Primary and Secondary display on the fly without rebooting Note Before you can change the assignment of the Primary display at least one Secondary display and the Extended Desktop mode must be enabled Extended Desktop mode is enabled through the Windows Display Property dialog under Settings For more information consult your Windows documentation To assign your Primary monitor 1 Click the buttons to assign the Primary monitor ATI Color Tab 31 For Windows XP e The ATI Displays tab shows you the display s that are active The Primary display has the i button depressed To change the display assignment click the Primary display s B button or click the button of the other display device For Windows 2000 e Clicking the button will reassign the Primary and Secondary monitors Clicking the B button creates a clone or mirror image of the Primary display onto the Secondary display Clicking the gt button extends your desktop to a Secondary display located to the right of the Primary display Clicking the button extends your desktop to a Secondary display located below the Primary display 2 Click OK or Apply to save the changes ATI Colo
31. e four rotation settings by clicking the appropriate button Optionally check the Mouse Track Rotation checkbox to have the mouse pointer match the display image Click OK or Apply 42 ATI Overlay Tab Rotation HotKeys Hotkeys can be assigned to quickly rotate the image on your display without having to access the Windows Display Properties dialog To assign rotation hotkeys 1 Choose the required rotation setting from the Configure HotKeys drop down list 2 Click on the HotKey field and press the appropriate key combination on your keyboard 3 Click Save Note When assigning hotkeys be careful that the key combinations you choose do not conflict with those of other applications in which you might want to use them The ATT Rotation page only checks for duplications within the Rotation page itself insofar as it allows a hotkey combination to be assigned only once ATI Overlay Tab The ATI Overlay tab allows you to configure the brightness contrast saturation hue and gamma properties of your video overlay Video Overlay Video overlay allows for the viewing of streaming video on your PC However there is only one video overlay which is only available on the Primary display The video overlay controls are automatically activated during playback of any video file type that supports overlay adjustments Move the sliders to the right to increase the values of the various options and to the left to decrease them
32. ect the Application Preference checkbox for high quality images with a negligible reduction in the application s performance Deselect the Application Preference checkbox to customize the anti aliasing ATI 3D Tab 49 Custom Properties Dialog OpenGL or Direct 3D SMOOTHVISIONTM Anisotropic filtering uses a texture filtering technique HD Anisotropic that blends multiple texture samples together The Filtering slider number of samples taken when anisotropic filtering is performed can vary By moving this slider to the right as the number of samples taken increases the quality of the final image increases significantly 16X provides extremely detailed crisp looking images as a result of the largest number of texture samples possible Selecting the Application Preference checkbox will result in high quality images with a negligible reduction in the application s performance Select the Application Preference checkbox for high quality images with a negligible reduction in the application s performance Deselect the Application Preference checkbox to customize the anisotropic filtering Texture Preference Choose between high quality or high performance slider textures for your application Moving the slider to the right delivers the highest quality experience Moving the slider to the left emphasizes a high performance solution while still providing good visuals Mipmap Detail Choose the texture quality of the
33. ects are caused by the changes required to provide a proper display on the TV Using TV Out 57 Use the controls available on the Adjustments tab on the Monitor Properties page accessible by clicking on the Monitor button on the ATI Displays tab to adjust the display on your monitor only Click the TV button to adjust the TV display only Viewing Text ona TV A TV is designed primarily to show moving images The large dot pitch of a TV will yield poor quality static images The small text sizes commonly used for PC desktops can appear blurred or unclear on a TV You can compensate for this degradation by using larger fonts Switching to a larger display font 1 Access the Display Properties dialog by right clicking on the desktop or navigating through Windows Control Panel 2 Click the Settings tab the Advanced button and then the General tab 3 Inthe Display section select Large 120 DPI from the Font Size or DPI Setting drop down list 4 Click Apply If prompted click Yes to restart your Computer Reducing Edge Distortion When using a TV for your computer s display you may see some edge distortion on the left and right side of your TV screen This effect depends on your TV and the computer application you are running You can reduce edge distortion by increasing the TV display s horizontal size or contrast Increasing the horizontal size of a TV display 1 Access the Display Properties dialog by right clicking
34. er your product contains a defect and whether your product is under warranty e ATI Customer Care is unable to assist with refunds returns or exchange specific inquiries If resolving the problem being experienced is critical to your decision to keep the product it is your responsibility to ensure that you know and are within the period of time your reseller will allow for refunds returns or exchange e ATTis not responsible for any expense incurred accessing Customer Care It is expected that customers will review the expense associated with the available support options and will choose the method that best meets their needs and budget e ATI Customer Care reserves the right to limit support options for products that are not registered or are at End of Life Warranty Information Hardware Warranty Service Statement ATI Technologies Inc warrants to the original purchaser of the hardware that the productis in good working condition according to its specifications at the time of shipment for a period of three years from the date of original purchase Should the product in ATI s opinion malfunction within the warranty period ATI will at its discretion repair or replace the product upon receipt with an equivalent Any replaced parts become the property of ATI This warranty does not apply to the software component of the installation usage not in accordance with product specifications and instructions natural or personal disaster o
35. es Product Registration Customer Care Warranty Information Hardware Warranty Service Statement Warranty Service Limitations Compliance Information FCC Compliance Information Industry Canada Compliance Statement CE Compliance Information L Information de conformit de la CE CE befolgungInformationen ODDODWDANDOOUA AHA A Installing Hardware 11 Quick Installation 11 Detailed Installation 11 Installing the Card 12 Connecting Display Devices 13 Turning on the System 14 Input and Output Adapters 14 To watch movies on your PC or record video from your VCR or camcorder 14 To display your PC output on TV and record PC output on videotape 16 To display your PC output on a high definition TV 18 Compatibility with earlier ALL IN WONDER products 20 Installing Software 23 Installing Drivers and Software in Windows 23 Software Installation Prerequisites 23 HYDRAVISION Multi monitor Management 24 Monitor Configuration 25 Reinstalling Drivers 25 Starting the ATI Multimedia Center 26 ATI s CATALYST Software Suite 27 Introduction 27 Features 27 Multiple Displays and 3D Gaming 27 HYDRAVISION 27 Accessing the CATALYST Software Suite 27 ATI Displays Tab 28 Dynamic Display Reassignment 30 ATI Color Tab 31 Hotkeys 35 Color Hotkeys Settings 36 ATI Options Tab 38 ATI Rotation Tab 40 Rotation HotKeys 42 ATI Overlay Tab 42 Video Overlay 42 Clone Mod
36. es be able to reset the graphics accelerator without requiring a system restart VPU Recover Settings M Enable VPU Recover tepare an error report if VPU Recover is activated for isubmission to ATI Technologies ATI VPU Recover Tab ATI VPU Recover Tab Enable VPU Recover Enables VPU Recover checkbox 54 ATI 3D Tab ATI VPU Recover Tab Prepare an Error Report checkbox When VPU Recover is activated a dialog will prompt you to submit an automatically generated error report to ATI This error report will help ATI to determine the cause of the problem and help create more stable drivers To disable this feature deselect the Prepare an Error Report checkbox Using TV Out 55 CHAPTER 5 Using TV Display and Capture Features Using TV Out Your ALL IN WONDER X600 Series has TV Out capability As an option it also supports YPbPr component video output Viewing Your PC s Display on a TV You can attach your graphics card to a TV and monitor at the same time You can also connect it to your VCR and record your monitor s display IMPORTANT INFORMATION for European Customers Some PC monitors in Europe cannot be used simultaneously with TV display When you enable TV display in Europe the refresh rate for the monitor and TV is set to 50 Hz Some monitors may not support this refresh rate and could be damaged e Please check the documentation supplied with your monitor to see if your monit
37. es time lapse video recording and motion triggered video recording which can be used for security applications Your card s advanced video recording and editing features also give you Video CD and DVD authoring capability You can use your ALL IN WONDER to connect your computer to a television This feature is ideal for playing games giving presentations watching movies and browsing the Internet For more information see Viewing Your PC s Display on a TV on page 55 ALL IN WONDER also turns your PC into an intelligent TV with the following features TV ON DEMAND THRUVIEW MULTVIEW TV MAGAZINE EAZYLOOK Zoom and Pan Scheduled Viewing Channel Scanning Video Recording Closed Captioning with HOTWORDS Program Transcript Recording North America only Interactive Program Guide in selected countries Personal Video Recorder with Real Time Video Compression REMOTE WONDER USB RF Remote Control optional AC 3 Digital Audio Playback supporting Dolby 5 1 surround sound 2 System Requirements System Requirements Hardware Intel Pentium 4 AMD Athlon or compatible e 128 MB of system memory 256 MB or more for best performance e Motherboard with free PCI Express slot e CD ROM drive for installation software 300 watt or greater power supply recommended A 350 watt power supply may be required in some fully loaded PC systems
38. have an ALL IN WONDER Series card and an ATI TV WONDER PCI card installed in the same system MULTVIEW lets you watch a different channel in a secondary video window You can record video from your ALL IN WONDER while you watch another channel on the TV WONDER The secondary window can be in the following locations Picture in Picture PiP When the main video window is in full screen the MULTVIEW PiP video window is embedded in the main window It can be positioned in the top bottom left or top bottom right of the main window Picture outside Picture PoP If you use only one monitor the main and MULTVIEW video windows can be displayed in separate windows If you use dual monitors you can drag the MULTVIEW window to the secondary monitor MULTVIEW can be displayed in a window or full screen in the secondary monitor The first time you start TV the MULTVIEW Initialization Wizard will guide you through setting up the MULTVIEW window location and the MULTVIEW tuner audio connection MULTVIEW controls include channel up down Mute unmute audio swap channel volume slider and channel status When MULTVIEW is in focus you can also type a channel number or name to change channels To enable MULTVIEW In the MULTVIEW Initialization Wizard click Enable MULTVIEW To open and close MULTVIEW 1 Right click the control panel or the video panel 2 Inthe Feature menu click MULTVIEW and then clic
39. iederspannung Richtlinie f r Produkte Enthalten Fernsehen tuner 73 23 EEC Niederspannungsrichtlinie EN 60950 1992 A1 A2 A3 A4 Sicherheit f r Einrichtungen der Informationstechnik 10 Compliance Information Quick Installation 11 CHAPTER 2 Installing Hardware This chapter will guide you through the physical installation of your ALL IN WONDER X600 Series card Quick Installation Experienced users and system administrators can follow these brief instructions for installing the ALL IN WONDER X600 Series card in the shortest possible time To perform a quick installation 1 Uninstall the drivers and software for your old graphics card if you have not already done so Note If you are using a motherboard containing an on board graphics solution and do not intend to use it as part of a multiple monitor display disable it Shut down and disconnect your computer system Remove any previously installed card Install your new ALL IN WONDER X600 Series card Reassemble and connect your computer system Install the ALL IN WONDER X600 Series drivers and configuration software from the ATI Installation CD ROM by doing one of the following O a KR WD ND e Run through the automatic ATISETUP utility or Start gt Run gt X ATISETUP EXE where X is the drive letter of your CD ROM drive Detailed Installation The following instructions will take you step by step through the installation of your new ALL IN
40. igured settings will only be apparent within a full screen 3D application environment Profiles for Indicates whether the profiles in the drop down list are for your Desktop or a Full Screen 3D environment Profiles drop Lists all of the Desktop or Full Screen 3D profiles that you down list have saved Selecting a profile from the list loads those custom color settings for the relevant environment To create a new profile simply type in a name and click Save 34 ATI Color Tab ATI Color Tab Save button Saves your current color settings to a Desktop or Full Screen 3D profile using the name you specified in the list box To restore these settings later simply select the Profile name from the list and click Apply or OK Delete button Deletes the profile that is selected in the Profiles list box All Colors checkbox Adjusts the Gamma Brightness or Contrast for Red Green and Blue simultaneously Note that any individual color settings in effect are lost if All Colors is selected the color settings revert back to the last known All Colors settings Red Green and Blue radio buttons Selects the active color component Red Green or Blue whose values will be adjusted by the Gamma Brightness and Contrast sliders Note that any individual color settings made are lost if you subsequently select All Colors Gamma slider Increases or decreases the gamma correction of your Desktop or full
41. ings are available when Theater Mode is Settings selected Same as source The aspect ratio of the source video is maintained for full video screen display Note that this option may result in black bars on either the horizontal or vertical sides of the video display Full Screen Video The source video is scaled so that your display is showing full screen Note if the source video contains horizontal black bars as do some DVD movies the full screen video will also contain black bars 4 3 Standard TV Select this option if the aspect ratio of the display device showing full screen video has the standard 4 3 aspect ratio standard TVs and monitors 16 9 Widescreen Select this option if the aspect ratio of the display device is showing full screen video has a 16 9 aspect ratio widescreen HDTVs ATI 3D Tab This tab allows you to fine tune settings for both Direct 3D and OpenGL applications It displays existing settings and allows you to create unique application profiles 46 ATI 3D Tab Color Options Rotation Overlay General Adapter Monitor Troubleshoot Color Management Displays SMARTGART tm 3D VPU Recover 3D Settings for Use recommended settings for 7 Use custom settings fe Direct3D DIRECT3D lt Performance Quality gt Current Settings Direct3D SMOOTHVISION HD Anti Aliasing Application Preference Maximum Resolution Application Preference Anisotropic Filtering Applic
42. irect3D Compatibility Settings Settings DIRECT30 Support DXT texture formats Enabled Disabled Altemate pixel center C Enabled Disabled Direct 3D Compatibility Settings Dialog Direct 3D Compatibility Settings Support DXT There are a few applications that can only support a texture formats limited number of texture formats By selecting Disabled the driver will not support DXT texture formats thus reducing the number of texture formats supported Alternate pixel May eliminate problems with some Direct 3D games center which display vertical and horizontal lines around textures or text that appears incorrect However this setting should only be used if you are experiencing the symptoms mentioned as it may cause problems with other games Defaults button Resets to the dialog s default values 52 ATI 3D Tab OpenGL Compatibility Settings OpenGL Compatibility Settings Settings Ge L Force Z buffer depth C Force 24 bit C Force 16 bit Disabled Triple Buffering Enabled Disabled OpenGL hardware acceleration Enabled Disabled OpenGL Compatibility Settings Dialog OpenGL Compatibility Settings Force Z buffer Explicitly set the Z Buffer depth Most applications will depth work best when Disabled is selected Triple Buffering Improves the frame rate of games when Wait for Vertical Sync is enabled in Custom Settings Enabling Triple Buffering may decrease app
43. k Show To close MULTVIEW click the Close button FX or right click the control panel or the video panel and in the Feature menu click MULTVIEW and then click Show To change the location of the MULTVIEW window When the main video window is in full screen right click the control panel or the video panel click MULTVIEW click Location and then click the position you want Top Left Top Right Bottom Right or Bottom Left 64 EAZYLOOK You can manually change the embedded window s size and location when the MULTVIEW borders are visible Autohiding MULTVIEW window controls and borders The MULTVIEW window borders disappear after a few seconds of mouse inactivity on the MULTVIEW window When you move your mouse over the MULTVIEW window the border re appears Only one video window can be can be in control When the embedded MULTVIEW window is in focus its borders are red when it is not in focus its borders are black For example when the borders are red a REMOTE WONDER channel change command will change the MULTVIEW channel MULTVIEW audio requirements If you have one audio card or an integrated audio chip you must connect one audio path internally CD In for example and the other externally Line In for example If you have two audio cards or one audio card and an integrated audio chip you can connect both audio paths internally externally or one internally and the other externall
44. lication performance as there will be less frame buffer memory available If there is insufficient memory available to support this feature it will be automatically disabled It is recommended that this feature remain disabled Defaults button Resets to the dialog s default values OpenGL This feature should only be disabled if you are hardware experiencing serious rendering problems Disabling this acceleration feature will significantly decrease OpenGL performance ATI 3D Tab 53 ATI VPU Recover Tab Hardware crashes may occur when a hardware device and the corresponding software device driver are no longer able to communicate with each other VPU Recover enables the ATI display driver to detect when the graphics card is no longer able to respond to display driver commands When this situation arises the display driver will reset the graphics card Depending on the current state of the system when VPU Recover is activated applications that are running may be able to fully recover from this reset In other cases running applications may be closed and the user will be returned to the Windows desktop General Adapter Monitor Troubleshoot Color Management Displays Color Options Rotation Overlay SMARTGART tm 3D VPU Recover VPU Recover allows the ATI display driver to reset the graphics accelerator when it stops responding to commands from the display driver Using VPU Recover the display driver will in most cas
45. mipmaps the Level slider application will use Mipmaps are a collection of different sized textures of the same image As the user moves closer to a 3D object the image quality should increase requiring a higher quality texture of the same image The base mipmap is the highest quality texture and all subsequent mipmaps are smaller sized textures of the same image Moving the slider to the right selects a higher quality base mipmap delivering the highest quality application experience Moving the slider to the left selects a lower quality mipmap delivering the highest application performance Wait for Vertical Controls whether the Vertical sync is always on always sync slider off or controlled by the application TRUFORM slider TRUFORMT is a technology developed by ATI that enables higher order surface rendering through traditional triangle rendering APIs It improves the sillouhettes and lighting of objects 50 ATI 3D Tab Properties OpenGL SMARTSHADER tm Effects Please select the SMARTSHADER tm Effect you would like to apply to your game SMARTSHADER tm Effects OpenGL Custom Properties Dialog SMARTSHADER Effects SMARTSHADER SMARTSHADER applies preset pixel effects on Effects drop down OpenGL or Direct 3D applications Choose the list desired effect and click OK Defaults button Restores the default settings ATI 3D Tab 51 Direct 3D Compatibility Settings D
46. nd click the Save button Saved profiles are selected from the Current Profile drop down window To delete a profile select it from the Current Profile drop down window and press the Delete button Compatibility Settings Accesses advanced settings that may solve button compatibility issues for a few specific Direct 3D or OpenGL applications whichever is selected For more information refer to the Compatibility Dialog section Defaults Resets to the dialog s default values 48 ATI 3D Tab Custom Properties Dialog OpenGL SMARTSHADER tm Effects Custom Settings SMOOTHVISION HD Anti Aliasing yy Application lt S Preference s i sd Cc A pp ee Application Anisotropic Filtering IV Braisiahce i 3 lt Performance Quality gt Texture Preference High Quality Mipmap Detail Level High Quality i Wait for Vertical Sync Default Off TRUFORM tm Always Off OK Cancel Custom Properties Dialog Custom Properties Dialog OpenGL or Direct 3D SMOOTHVISIONTM HD Anti Aliasing slider SMOOTHVISION Anti Aliasing improves image quality by removing jagged edges from 3D images resulting in smoother more natural looking objects Anti Aliasing can be applied using different sample patterns and sample points such as 2X or 4X Moving this slider to the right increases sampling to provide the most realistic 3D image Sel
47. nty apply Limitations This warranty is valid only if the online Product Warranty Registration form at ati com online registration is successfully submitted within 30 days of purchase of said product All warranties for this product expressed or implied will expire three 3 years from date of riginal purchase The REMOTE WONDER unitis warranted for 1 year The HDTVCOMPONENT ADAPTER is warranted for 1 year All accompanying cables and accessories are warranted for 90 days No warranties for this product expressed or implied shall extend to any person who purchases the product in a used condition The liability of ATI in respect of any defective product will be limited to the repair or replacement of such product ATI may use new or equivalent to new replacement parts Defective product will be sent in for repair or replacement only ATI makes no other representations or warranties as to fitness for a particular purpose merchantability or otherwise in respect of the product No other representations warranties or conditions shall be implied by statute or otherwise In no event shall ATI be responsible or liable for any damages including but not limited to the loss of revenue or profit arising From the use of the product as a result of any event circumstance action or abuse beyond the control of ATI whether such damages be direct indirect consequential special or otherwise and whether such damages are incurred by
48. oblems check the audio connections to your ALL IN WONDER card No Sound from Ensure that the audio connection between your TV ALL IN WONDER card and your sound card is correct For instructions see nput and Output Adapters on page 14 Solution Selector 71 Audio Troubleshooting Problem Possible Solution Can t Record Sound 1 Click Start point at Programs point at Accessories point at Entertainment and then select Volume Control Or right click the speaker icon usually in the lower right corner of your screen then click Open Volume Controls In the Volume Control menu click Options click Properties click Recording and then click OK The Recording Control opens Ensure that Line or the Audio input you selected in the TV Sound Initialization Wizard is checked and then close the dialog Can t record sound when recording froma videotape No sound on the videotape when outputting toa VCR Left and right audio output from your VCR must be connected to your ALL IN WONDER X600 Series card note that S Video does not provide an audio connection For instructions see Input and Output Adapters on page 14 Left and right audio output from your VCR must be connected to your ALL IN WONDER X600 Series card note that S Video does not provide an audio connection For instructions see nput and Output Adapters on page 14 ATI Technologies 72 Solution Selec
49. on on HYDRAVISION please refer to the HYDRAVISION User s Guide PDF located on your ATI Installation CD Accessing the CATALYST Software Suite For help installing the CATALYST Software Suite refer to the Getting Started Guide 28 ATI Displays Tab The CATALYST Software Suite installs the ATI display tabs into the Windows Display Properties dialog They are accessed through the Advanced button located on the Settings tab To access the Display Properties dialog right click on the desktop or navigate through Windows Control Panel which is located in the Start menu Display Properties Themes Desktop Screen Saver Appearance Settings Drag the monitor icons to match the physical arrangement of your monitors 2 EE Display 1 Plug and Play Monitor on RADEON v Screen resolution Color quality Les Moe Highest 32 bit x 1024 by 768 pixels nin ie device as the primary monitor Troubleshoot Windows Display Properties Settings Tab ATI Displays Tab The ATI Displays tab provides control over multiple monitor features Here you can enable disable display devices and swap the assignment of Primary and Secondary displays ATI Displays Tab 29 Color Options Rotation Overlay SMARTGART tm 3D VPU Recover General Adapter Monitor Troubleshoot Color Management Displays Monitor y 1280x960 j y 1280x960 75Hz 75Hz OB DA
50. on the desktop or navigating through Windows Control Panel Click on the Settings tab and then the Advanced button Click on the ATI Displays tab Click on the TV button Click the Adjustments tab Da KR WO ND In the Screen Size section click on the plus button beside the horizontal arrowheads fz to increase the horizontal size of the TV display 58 Using TV Out 7 Click OK or Apply to save the changes you have made You can also reduce edge distortion by increasing the TV s contrast Increasing the contrast of a TV display 1 Access the Display Properties dialog by right clicking on the desktop or navigating through Windows Control Panel Click on the Settings tab and then the Advanced button Click on the ATI Displays tab Click on the TV button Drag the Contrast slider to the right to increase the contrast O a KR ND Click OK or Apply to save the changes you have made Using TV Display Alone If you plan to move your computer to a place where you are using TV display only make sure that you have the TV display feature enabled prior to removing the monitor The maximum display resolution for TV is 1024x768 Choosing a resolution higher than this will cause the TV display to disappear if it is the only display device Using Games and Applications Some older games and applications may program your ALL IN WONDER X600 Series directly to run under a specific display mode This may cause your TV
51. or supports a refresh rate of 50 Hz e If your monitor does not support 50 Hz or if you are not sure turn off your monitor before turning on your PC when using your TV asa display TV display is ideal for giving presentations and watching movies or playing games on a screen larger than a typical monitor The following tips will help you get the most out of your TV Out feature Connecting to a TV or VCR To connect your ALL IN WONDER X600 Series card to a TV or VCR use an S Video cable Many TVs and VCRs have a Composite video input in which case you can use the supplied S Video to Composite video adapter If your TV has cable input only you can connect your graphics card to your TV through your VCR or an RF modulator that is available from most electronics stores Starting Windows with TV Display Enabled The TV screen may become scrambled during the initial Windows logo display This distortion is only a temporary effect and your screen will be restored within a few seconds 56 Using TV Out During start up your ALL IN WONDER X600 Series will go through a sequence of mode settings during which your TV display will remain blank This process takes only a few seconds and programs the TV display To enable or disable the TV display 1 Access the Windows Control Panel Double click Display 2 Click the Settings tab and then the Advanced button 3 Click the ATI Displays tab Click the TV button 4 5 Click the enabl
52. output on TV and recording PC output on videotape 16 displays Hotkey 29 primary 28 scheme 29 secondary 28 dot pitch 57 driver information 38 drivers installing 23 reinstalling 25 uninstalling 3 DVI operational mode 40 DXT texture formats 51 E EAZYLOOK 64 F full screen 3D 3D full screen 31 G games TV display 58 gaming performance performance gaming 27 gamma 34 35 color settings 31 video overlay 42 gamma correction 34 Getting started 1 graphics card resetting through VPU Recover 53 H Hardware installing 11 HDTV troubleshooting 69 HDTV adapter troubleshooting 69 horizontal size TV display 57 Hotkeys color settings 35 hue video overlay 42 HYDRAVISION 27 HYDRAVISION 24 l input and output adapters 14 input output adapter 20 Installation detailed 11 quick 11 installing CATALYST Software 66 M Multimedia Center starting 26 multiple displays 59 rotate 41 MULTVIEW 63 audio requirements 64 Picture in Picture Picture outside Picture 63 TV WONDER 63 O old graphics drivers uninstall 65 Options tab 38 overlay adjustments 42 overlay settings Clone Mode 43 P performance 3D 46 Picture in Picture 63 Picture outside Picture 63 primary display 28 clone mode 44 profiles 3D 47 color 33 color settings 33 Q quality 3D 46 Quick Installation 11 R registration 2 REMOTE WONDER 27 resetting graphics card 53 rotate multiple displays 41 single display 41 Rotation HotKeys 42 S safety instructions iii
53. point For example DVD Player or Multimedia applications Windows New Hardware Found Windows may start the Add New Hardware Wizard to install the Standard VGA Driver ATI Technologies 66 Installing the CATALYST Software Suite To install and detect your new hardware 1 Click Next to allow Windows to search for the Standard VGA or Standard PCI Graphics Adapter If prompted for the Windows CD ROM insert it into your CD ROM drive 2 Type the following D lt Operating System name gt for example D WinXP If D is not your CD ROM drive substitute D with the correct drive letter 3 Click OK 4 Click Finish to close the Wizard and then restart your system Installing the CATALYST Software Suite ATP s CATALYST software suite provides you with all you need to get the most out of your ATI Graphics Accelerator card The CATALYST software suite comprises four distinct software elements e Driver e Multimedia Center e HydraVision not included in the Express Install e Remote Wonder Software To ensure you install supported software use the ATI Installation CD ROM that shipped with your ATI Graphics Accelerator card To install the CATALYST Software Suite 1 Insert the ATI INSTALLATION CD ROM into your CD ROM drive If Windows runs the CD ROM automatically proceed to step 6 2 Click Start 3 Select Run Type the following D ATISETUP If D is not your CD ROM drive substitute D with the
54. r Tab The ATI Color tab allows you to configure Gamma Brightness and Contrast color settings for both your desktop and full screen 3D environments You can also save settings to a color profile for easy recall In addition you can assign unique hotkey combinations that allow you to adjust Gamma Brightness and Contrast color settings within your full screen 3D applications 32 ATI Color Tab Ci SCAT GAS Tita fan 3D a YPU Recover D Displays Overlay General Adapter Monitor Troubleshoot L Color Management Zi Color A Options il Rotation Desktop Profiles for Desktop save _1 C FullScreen3D Css _j MN All Colors g C C Reset Gamma 05 j 35 J Brightness 100 j 100 F Contrast CA mew Datat J ATI Color Tab Desktop Settings ATI Color Tab 33 SMARTGART tm 3D VPU Recover General Adapter Monitor Troubleshoot Color Management Displays Color Options Rotation Overlay C Desktop Profiles for Full Screen 3D Full Screen 3D Generic Profile he Delete J F E ef oY Reset Gamma asis pu 4 J Brightness 100 100 oe Contrast 0 200 Foi H J Hotkeys Defaults ATI Color Tab Full Screen 3D Settings ATI Color Tab Desktop radio Select Desktop to configure your desktop color settings button Full Screen 3D Select Full Screen 3D to configure the color settings for radio button your 3D application Note that the conf
55. r record video from your VCR or camcorder Use the ATI input adapter to connect a VCR or camcorder to your ALL IN WONDER X600 Series card as shown Input and Output Adapters 15 Typical VCR or camcorder audio and video output connectors Use composite video out or S Video out S Video will provide better results Cable with S Video plug at each end Cables with RCA plug at each end available separately from a consumer electronics dealer ATI Input Adapter You can snap the adapters together for convenient placement and use Input Output connector o ALL IN WONDER X600 Series card 16 Input and Output Adapters To display your PC output on TV and record PC output on videotape Use the ATI output adapter to connect a TV camcorder or VCR to your ALL IN WONDER X600 Series card as shown we lt 1 Typical VCR or camcorder audio and video input connectors Use composite video in or S Video in S Video will provide better results To use your TV as a display you must enable TV Out see Using TV Out on page 55 2 Cables with RCA plug at each end available separately from a consumer electronics dealer Cable with S Video plug at each end ATI Output Adapter You can snap the adapters together for convenient placement and use Input and Output Adapters 17 Input Output connector ALL IN WONDER X600 Series card
56. r unauthorized alterations repairs or modifications Proof of purchase may be required if doubt exists regarding warranty eligibility Late model products are assumed to be under warranty ATI accepts ordinals photocopies and faxes as proof of purchase when required Warranty Service For warranty service instructions visit ati com online warranty or contact one of our Customer Service Representatives using one of the aforementioned means Before shipping any unit for repair obtain an RMA number for warranty service When shipping your product pack it securely show the RMA and serial number of the product on the outside and ship prepaid and insured ATI will not be held liable for damage or loss to the product in shipment Standard warranty service consists of repair upon receipt ATI reserves the right to replace the product with a serviced product at their sole discretion at any time Warranty Information 7 You are responsible for the cost of shipping the product to ATI ATI plays the cost of returning the product to you Products which are repaired under warranty are guaranteed for the remainder of the original warranty period Repairing or exchanging a product does not start a new warranty period If at the time of repair a productis already out of warranty or within the last 90 days of the warranty period ATI will guarantee the repair for the full 90 days All other terms and conditions of the original warra
57. rs tilted My CRT display is green Consult your HDTV user s manual Your system is in component output mode Restart your computer with the CRT monitor connected x ATI Technologies 70 Solution Selector Audio Troubleshooting Problem Possible Solution No Sound Ifyou have external speakers ensure that they are powered on POWER indicator light is on and connected to the LINE OUT or SPEAKER OUT connectors on your sound card Connect the Line In connector to your sound card first Still No Sound 1 Click Start point at Settings select Control Panel and then double click Sounds 2 In the Events area Click Asterisk and then click a WAV file in the Sound area 3 Click the Play button to preview the sound If you still do not hear any sound open the Volume Control Click Start point at Programs point at Accessories point at Entertainment and then select Volume Control Or right click the speaker icon usually in the lower right corner of your screen and then click Open Volume Controls e If the speaker icon is not in your Taskbar do the following In the Windows Taskbar click Start point to Settings click Control Panel then double click Multimedia In the Audio tab check Show volume control on the Taskbar Ensure that the Volume Control and the Wave channel are not muted or set very low When you hear sound from your speakers you know they are working e Ifyou still experience audio pr
58. s IV Alternate DVI operational mode ATI Options Tab ATI Options Tab Version Information Details button Shows the Catalyst version number 2D version number and the driver build information Gives access to the Details tab which lists the card s hardware details and driver information Reactivate all Reactivates any disabled graphics warning messages warning messages Enable ATI Enables disables the ATI taskbar applications and taskbar icon removes the ATI icon from your system tray application Show ATI icon on taskbar Removes replaces the ATI icon from the system tray without disabling the ATI icon applications Disable quick resolution feature The quick resolution feature is accessible by left clicking the ATI icon in the system tray Checking this option disables this feature 40 ATI Rotation Tab ATI Options Tab Reduce DVI Resolves display corruption or no image at high frequency on resolutions for example 1280x1024 75Hz using a high resolution digital DVI display This setting has no effect when using a DVI I to VGA adapter Alternate DVI Use this option if you are experiencing display corruption operational mode on your DVI flat panel ATI Rotation Tab Use the Rotation tab to rotate the image on your display up to 180 degrees This feature is useful when using a flat panel display that can be physically rotated to different positions SMARTGAR
59. s operated Retain Instructions The safety and operating instructions should be retained for future reference Heed Warnings All warnings on the product and the operating instructions should be adhered to Compatibility This option card is for use only with IBM AT or compatible UL Listed personal computers that have Installation Instructions detailing user installation of card cage accessories Grounding For continued protection against risk of electric shock and fire this accessory should be installed only in products equipped with a three wire grounding plug a plug having a third grounding pin This plug will only fit into a grounding type power outlet This is a safety feature If you are unable to insert the plug into the outlet contact your electrician to replace the obsolete outlet Do not defeat the safety purpose of the grounding type plug Secure Attachment All card securement pins shall be completely tightened as to provide continuous bonding between the option card and the PC chassis Outdoor Antenna Grounding Since an outdoor antenna or cable system is connected to the product be sure that the antenna or cable system is grounded so as to provide some protection against voltage surges and built up static charges Article 810 of the National Electrical Code ANSI NFPA 70 provides information with regard to proper grounding of the mast and supporting structure grounding of the lead in wire to the antenna discharge unit
60. saturation video overlay 42 secondary display 28 secondary displays clone mode 44 serial number 2 settings 3D applications 36 Clone Mode 44 single display rotate 41 Software installing 23 Special Multimedia Center features EAZYLOOK 64 system requirements 2 T tab Overlay 42 Theater Mode 44 Triple Buffering 52 troubleshooting audio 70 general problems 67 HDTV 69 HDTV adapter 69 TV MULTVIEW 63 TV display 55 57 58 contrast 57 games 58 hardware restrictions 56 horizontal size 57 TV Out 55 56 TV WONDER 63 U uninstall old graphics drivers 65 Uninstalling old graphics card software 65 V VGA 44 Video overlay definition 42 video overlay 42 brightness 42 contrast 42 gamma 42 hue 42 saturation 42 VPU Recover 53 W watching movies on PC and recording video from VCR or camcorder 14 Y YPbPr 69 Z Z Buffer depth explicitly setting 52
61. splay Single TV S Video Out The S Video out can also support a composite connection via the S Video to Composite adapter Single HDTV HDTV Output HDTV High Definition Television display Adapter CRT display VGA connector UNSUPPORTED CONFIGURATION TV S Video Out if the CRT display is attached to the DVI I connector via the DVI I to VGA adapter CRT display VGA connector HDTV HDTV YPrPb output cable DFP display DVI I connector TV S Video out DFP display DVI I connector HDTV S Video Out to HDTV YPrPb cable CRT display VGA connector DFP display DVI I connector CRT display VGA connector The DVI I connector can support a CRT display DVI I connector CRT display using the DVI I to VGA with DVI I to VGA adapter adapter CRT display VGA connector The TV display will clone the image DFP display DVI I connector of one of the other two displays TV S Video Out 62 Display Configurations Display Connector s Comments Configuration Used CRT display VGA connector UNSUPPORTED CONFIGURATION DFP display DVI I connector HDTV HDTV YPrPb output cable CRT display VGA connector UNSUPPORTED CONFIGURATION CRT display DVI I connector TV with DVI I to VGA adapter S Video Out CRT display VGA connector UNSUPPORTED CONFIGURATION CRT display DVI I connector HDTV with DVI I to VGA adapter S Video Out to HDTV YPrPb cable MULTVIEW 63 MULTVIEW If you
62. ter If you are installing the graphics card drivers in a special working scenario such as if you have reinstalled your operating system or want to perform a manual reinstallation To reinstall drivers using the ATISETUP utility You can always install the drivers using the ATISETUP utility on the ATI Installation CD ROM The ATISETUP utility will start automatically if you insert the ATI Installation CD ROM into your CD ROM drive after the operating system has started If your CD ROM auto run is not enabled or the ATISETUP utility does not start automatically perform the following actions 1 Click the Start button in the task bar 2 Select Run 26 Starting the ATI Multimedia Center 3 Browse to ATISETUP EXE on the root directory of the ATI Installation CD ROM and click OK To manually reinstall drivers To manually reinstall drivers when prompted for a driver installation CD insert the ATI Installation CD ROM and browse to the drivers subdirectory Starting the ATI Multimedia Center From LaunchPad The LaunchPad provides a convenient way to start all your Multimedia Center features just click the one you want LaunchPad opens automatically when you start your computer or if you prefer you can right click LaunchPad and uncheck Load on Startup in the drop down menu to disable this feature FIEF ES From Windows taskbar 1 Inthe Windows taskbar click Start and then point at Programs 2 Point at ATI
63. the person to whom this warranty extends or a third party From the loss of use of the product as a result of any event circumstance action or abuse beyond the control of ATI whether such damages be direct indirect consequential special or otherwise and whether such damages are incurred by the person to whom this warranty extends ora third party Unauthorized repairs to an ATI board level product will void the warranty offered by ATI Technologies ATI reserves the rightto refuse to service any product which has been altered modified or repaired by non ATI service presonnel o 8 Compliance Information Compliance Information FCC Compliance Information This ALL IN WONDER product complies with FCC Rules part 15 Operation is subject to the following two conditions e This device may not cause harmful interference and e This device must accept any interference received including interference that may cause undesired operation This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if notinstalled and used in accordance with manufacturer s instructions may cause harmful interference to radio communications However there is no guarantee that interference
64. tor Index Numerics 102 part number 2 3D 31 custom settings 46 performance 46 profiles 47 quality 46 3D applications settings 36 A adapters compatibility with earlier ALL IN WONDER products 20 input and output 14 adjusting overlays 42 application profiles creating 45 ATI Overlay tab 42 ATI taskbar applications disabling 38 39 enabling 38 39 B brightness 34 35 color settings 31 video overlay 42 C card specification information 38 Catalyst version number 39 CATALYST Software installing 66 CATALYST Software Suite 27 features 27 REMOTE WONDER software 27 Clone Mode overlay settings 43 settings 44 clone mode primary display 44 secondary displays 44 color hotkeys 34 profiles 33 color contrast contrast color 34 color preview color settings 34 color profile profile color 31 color settings brightness 31 color preview 34 contrast 31 desktop 33 gamma 31 Hotkeys 35 profiles 33 Compliance information Low Voltage Directive for TV tuner equipped products 9 configuration primary monitor 25 contrast 34 35 color settings 31 TV display 57 video overlay 42 Copy protection DVDs DVDs Copy protection 69 custom settings 3D 46 D desktop color settings 33 Detailed installation 11 display configurations 61 display corruption DVI 40 high resolution 40 Display devices connecting 13 display devices multiple 59 displaying PC output on a high definition TV 18 displaying PC
65. will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Re orient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment to an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help The use of shielded cables for connection of the monitor to the graphics card is required to ensure compliance with FCC regulations Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user s authority to operate this equipment Industry Canada Compliance Statement ICES 003 This Class B digital apparatus complies with Canadian ICES 003 Cet appareil num rique de la Classe B est conforme a la norme NMB 003 du Canada For further compliance information ATI Research Inc 4 Mount Royal Ave Marlborough MA 01752 1976 USA 508 303 3900 Compliance Information 9 CE Compliance Information EMC Directive 89 336 EEC and Amendments 92 31 EEC and 93 68 EEC for Class B Digital Device EN 55022 1998 CISPR 22 1997 Class B Limits and Methods of Measurement of Radio Disturbance Characteristics of Information
66. y EAZYLOOK Designed to work with the REMOTE WONDER see page 27 in full screen mode EAZYLOOK displays large on screen information about remote control functions when you watch TV DVD or File Player It also provides assistance when you use the Library or navigate in TV Listings Uninstalling Old Graphics Card Software 65 CHAPTER 7 Troubleshooting The following troubleshooting tips may help if you experience problems ATT s documentation contains helpful installation configuration tips and other valuable feature information Please contact your dealer for more advanced troubleshooting information More troubleshooting information can be found on the ATI Website at ati com support Uninstalling Old Graphics Card Software To ensure successful installation of your ALL IN WONDER X600 Series card you must uninstall the graphic drivers for the existing graphics card before removing it from your computer To uninstall old graphics drivers 1 With your current graphics card still in your computer close all open applications 2 Click Start gt Settings gt Control Panel then select Add Remove Programs 3 Select your current graphic drivers then click Add Remove e The Wizard will help you remove your current display drivers e Restart your system after the drivers have been removed If the previously installed graphics card has any additional software installed they may also need to be removed at this
67. y already be assigned to your applications and 3D games Hotkey action Specifies the action that the assigned hotkey combinations will control within a full screen 3D application environment You can only assign one hotkey combination to each action Assigned Lists the assigned hotkey combinations and the actions hotkeys that each one controls Add button Adds a hotkey combination to the assigned list Remove button Removes a hotkey combination from the assigned list Disable hotkeys Disables all hotkeys To disable a single hotkey checkbox combination remove it from the assigned list To assign color settings hotkeys for full screen 3D applications 1 2 3 4 Select a modifier key from the Modifier Key list Select a hotkey from the Hotkey list Select the action you want from the Hotkey Action list Click Add to create the hotkey combination This combination will appear in the Assigned Hotkeys text box Only one hotkey combination can be assigned to each action if you assign a new combination for an action it will overwrite an existing one Note When assigning hotkeys be careful that the key combinations you choose do not conflict with those of other applications in which you might want to use them The ATT Color properties page only checks for duplications within the Color page itself insofar as it allows a hotkey combination to be assigned only once 38 ATI Options Tab To remove assigned hotkeys
68. y by providing a standard VGA connector and a digital flat panel connector such as the DVI I connector In either of these cases you can access Clone Mode Options if more than one display is connected Note These settings apply to video content viewed when you are in dual controller Clone mode and not single display or extended desktop configurations Properties Clone Mode Options You may need to restart your video application before changes to some of these settings can take effect For help with these Clone Mode Overlay options click the question mark in the top right corner of this dialog then click on a control Overlay Display Mode Standard C Same on all Theater Mode Settings Set video aspect ratio to Same as source video Full screen video Display device aspect ratio 4 3 Standard TY 16 9 Widescreen Clone Mode Options tab ATI 3D Tab 45 Clone Mode Options Standard Video content is displayed on your Primary display only Theater Mode Video content is displayed on your Primary and Secondary displays Video content is displayed on your Secondary display s is always in full screen mode Note your computer must be set for 16 bit color depth or higher to use this mode Same on all Video content is displayed on your Primary and Secondary display in exactly the same manner For example all displays will show video output in full screen mode Theater Mode These sett

ATI ALL-IN-WONDER X600 PRO, Graphic Card

Contents

Download Pdf Manuals

Related Search

Related Contents