Sanyo Transmax SC-150 Bagged Upright Vacuum
Contents
1. the date the productwas first purchased at retail LABOR PARTS MOTOR 1YEAR 1YEAR 2YEAR EXCLUSIONS This warranty does not cover A the adjustment of customer operated controls as explained in the appropriate model s instruction manual or B the repair of any product whose serial number has been altered defaced or removed This warranty shall not qun to the following items non electrical mechanical attachments accessories appearance items disposable parts such as filters paper bags belts headlight lamps and agitator brushes This warranty shall not apply to setup installation removal or the product for repair or reinstallation ofthe product after repair This warranty doesnot apply torepairs or replacements necessitated by any cause beyond the control of SFC including but notlimited to any malfunction defect orfailure caused byor resulting fromunauthorized service or parts improper maintenance operation contrary to furnishedinstructions shipping ortransit accidents modification orrepair by theuser abuse misuse neglect accident incorrect power line voltage fire flood orother Acts of God or normal wear and tear The foregoing isin lieu ofall other expressed warranties and SFC does not assumeor authorize any party to assume for itany other obligationor liability THE DURATION OF ANY WARRANTIES WHICH MAY BE IMPLIED BY LAW INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS IS LIMITED TO THE TER2. SANYO INSTRUCTION MANUAL SC 150 SC 180 VACUUM CLEANER Contents IMPORTANT SAFETY INSTRUCTIONS n 1 2 FEATURE See eee 3 NAMES OF PARTS 4 ASSEMBLING THE VACUUM CLEANER 5 USING THE VACUUM CLEANER 6 7 REPLACING THE PAPER 8 PRODUCT MAINTENANCE 9 TROUBLESHOOTING 10 REPLACEMENT PARTS 10 IMPORTANT SAFETY INSTRUCTIONS When using an electrical appliance basic precautions should always be followed including the following READ ALLINSTRUCTIONS BEFORE USING THIS VACUUM CLEANER WARN N G 7 To reduce the risk of fire electric shock or injury Do notleave appliance when plugged in Unplug from outlet when notin use and before servicing e Do notuse outdoors or on wet surfaces e Do notallow to be used as atoy Close attention is necessary when used by or near children Use only as described in this manual Use only the manufacturer s recommended attachments Do notuse with a damaged cord or plug If appliance is not working as it should has been dropped damaged left outdoors or dropped into water returnit to service center Do not pull or carry by the cord use cord as a handle close a dooron cord or pull cord around sharp edges or corners Do not run appliance over cord Keep cleaner overthe cord Keep the cord away from heated surfaces Do notunplug by pulling on cord To unplug grasp the plug notth
3. MOF THIS WARRANTY IN NOEVENT SHALL SFC BELIABLE FOR SPECIAL INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING FROM OWNERSHIP OR USE OF THIS PRODUCT OR FORANY DELAY IN THE PREFORMANCE OF ITS OBLIGATIONS UNDER THIS WARRANTY DUE TO CAUSES BEYONDITS CONTROL SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS AND OR DO NOT ALLOW THE EXCLUSION ORLIMITATION OF CONSEQUENTIAL DAMAGES SO THEABOVE LIMITATIONS AND EXCLUSIONS MAY NOT APPLY TO YOU THIS WARRANTY GIVES YOU SPECIFICLEGAL RIGHTS YOUMAY HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE For your protection in the eventof theftor loss of this product please fill inthe information below for your own personal records Model JSerial No Located on back or bottom side of unit Date of Purchase Purchase Price Where Purchased SANYO 21605 Plummer Street 9BF D P111 00440 0109 Chatsworth CA 91311 E WWW sanyo com
4. NERLIMITED WARRANTY OBLIGATIONS USA ONLY In order to obtain warranty service the product must be delivered to and picked up from an Authorized Sanyo Factory Service Center at the user s expense unless specifically stated otherwise in this warranty The names and addresses of Authorized Sanyo Service Centers may be obtained by calling the toll free number listed below For product operration authorized service senter referral service assistance or problem resolution call CUSTOMER INFORMATION 1 800 421 5013 Weekdays 8 00 AM 5 00 PM Pacific Time www Sanyoservice com For accessories and or parts not available from an authorized dealer call PARTS ORDER INFORMATION 1 800 726 9662 Weekdays 8 00AM 5 00 PM Pacific Time THIS WARRANTY IS VALID ONLY ON SANYO PRODUCTS PURCHASED AND USED IN THE UNITED STATES OF AMERICA THIS WARRANTY APPLIES ONLY TO THE ORIGINAL RETAIL USER AND DOES NOT APPLY TO PRODUCTS USED FOR ANY INDUSTRIAL PROFESSIONAL OR COMMERCIAL PURPOSE THE ORIGINAL DATED BILL OF SALE OR SALES SLIP MUST BE SUBMITTED TO THE AUTHORIZED SANYO SERVICE CENTER AT THE TIME WARRANTY SERVICE IS REQUESTED Subject to the OBLIGATIONS above and EXCLUSIONS below SANYO FISHER COMPANY SFC warrants this SANYO products againstdefects in materialsand workmanship forthe periods ofLABOR and PARTS specified below SFC will repairor replace atits option the product and anyof its parts which failto conform to this warranty The warranty period commences
5. TC Z Z Crevice a topl Upholstery tool amp Dusting brush Upholstery tool amp Crevice tool Dusting brush WALL MOUNTABLE STORAGE NAMES OF PARTS SC 150 SC 180 Hole for a wall mountable storage Hole for wall mountable storage Floor nozzle X Crevice tool SHH Cord storage IE hook Extension pipe AA Upholstery tool amp Dusting brush si WARNING Operate vacuum cleaner only at the voltage specified on nameplate ASSEMBLING THE VACUUM CLEANER Caution Do not connect the power plug to the wall socket until assembly is completed 1 Insert the hose into the main 2 Attach the extension pipes and the unit floor nozzle as shown N S Click into place REMOVAL REMOVAL Pull while pressing button Rotate the rings inthe direction shown by the arrows and pull pipes apart Match the imprinted numbers as Button Z N Ring Fit the floor nozzle slot onto the Set the holding latch into the floor nozzle mount latch slot Latch slot Floor nozzle slot Floor nozzle mount REMOVAL hose holder mount Slide the button in Hook the hose holder onto the the direction shown Button by the arrow S Y Ii Floor nozzle Hose holder mount Caution Do notlift or carry the vacuum cleaner by the hose or extension pipes There is a hazard if the hoseor extension pipes become detac
6. e cord e Do nothandle plugor appliance with wethands e Do notput any object into the openings Do notuse with any opening blocked keep free of dust lint hairand anything that may reduce airflow Keep hair loose clothing fingers and all parts of body away from openings and moving parts Do not pick up anything thatis burning or smoking such as cigarettes matches or hot ashes Do notuse withoutfilters in place Turn off all controls before unplugging Use extra care when cleaning on stairs Do notuse to pick up flammable or combustible liquids such as gasoline or use in areas wherethey may be present Unplug before connecting any hose attachment accessory e Do nottouch the agitator while it is spinning To reduce the risk of electric shock this appliance has a polarized plug one blad is wider than the other This plug will fit in a polarized outlet only one way If the plug dose not fit fully the outlet reverse the plug If it still does notfit contacta qualified electrician to install the proper outlet Do not change the plug in any way SAVE THESE INSTRUCTIONS This vacuum cleaner is intended for household use only FEATURES CLEANS CARPETS AND OTHER FLOORING Upholstery tool amp I Crevice tool Dusting brush CLEANING INNARROW SPACES AND HARD TO REACH PLACES SUCHASUNDER BEDS ETC TABLETOP CLEANING AND CLEANING OF SLIDING WINDOW OR DOOR GROOVES E
7. eaner performance PRODUCT MAINTENANCE aution Be sure turn the ON OFF switch to the O position and disconnect the power cord from the wall outlet before cleaning MAIN UNIT Wet asoft cloth with neutral 2 Wipe the external surfaces 3 Wipe with a dry cloth detergent solution and wring of the unit out excess liquid Caution Do use organic solvents including thinner or other strong cleaning liquids such as alkaline detergents Use of such substances may cause discoloration or deterioration of materials resulting in deformation or cracking Remove threads caught inthe agitor assembly by cutting them with scissors Threads The electrostatic micron filter should be replaced atleast once every 8 months in order to maintain cleaning performance Only use genuine Sanyoreplacement filters 1 Remove the dust cover and replace 2 Replace the dust cover the electrostatic micron filter Electrostatic micron filter 4 N C gt gt A Z Dust cover Caution The electrostatic micron filter cannot bereused TROUBLESHOOTING e If there is a problem with the vacuum cleaner carry out the following checks to find the cause If the problem still persists after the checks have been made do not use the vacuum cleaner to prevent the possibility of an accident occurring Turn the ON OFF switch to the O position disconnect the
8. hed Be careful not to sandwich the electrical cord between the pipe and the main unit when inserting the holding latch into the latch slot USING THE VACUUM CLEANER Set the ON OFF switch to to operate the vacuum cleaner 2 Set the ON OFF switch to O to stopthe vacuum cleaner POWER CORD WINDING THE POWER CORD 1 Hook the power cord Wind the power cord around the cord over the clip whichis storage hooks located onthe upper cord storage hook as shown Secure the power Plug side cord plugon the power cord UNWINDING THEPOWER CORD 1 Rotate the upper Return the hook to cord storage hook the upright position downward Sie before attempting Upper cord to rewind the storage hook power cord e First attach the main unit to the extension pipes e When the crevice toolis notin use place itin the storage area between the cord storage hooks Crevice tool _ USING THE VACUUM CLENER UPHOLSTERY TOOL amp DUSTING BRUSH SC 180 only Press the tabs downward to remove the dusting brush from the upholstery tool Insert the front portion of the dusting brush into the groove located inside the front of the upholstery tool Pull up on the tabs to reattach the dusting brush to the upholstery tool After use fix to the extension pipe for storage as shown in the illustration URBINE BRUSH SC 180 only The turbine brush has a lever with two This rug attachment has a small bu
9. ilt in positions turbine that is driven by the suction force of the unit The turbine drives a brush inside the attachment to pick up fine particles more efficiently Turbine Caution Do not touch the agitator while it is spinning e Do not vacuum bare floors with lever in rug position Doing so may damage the floor e Do not leave the brush rotating for long periods over the same spot Doing so may damage the carpet REPLACING THE PAPER BAG aution Be sure to turn the ON OFF switch tothe O position and disconnect the power cord from the wall outlet when replacing the paper bag Always make sure the paper bagis installed properly before using 1 Pull the dust coverto remove it 2 Remove the paper bag Dust cover Q N 3 Throw away the usedpaper bag 2 5 Slide the bag collar of the new bag into 6 Return the dust coverto its original track completely position Bag collar Caution e Be careful not toclamp the paper bag with the edge ofthe dust cover e Always use genuine Sanyo paper bagsto assure maximum performance Never use your vacuum cleaner without a paper bag Never use a broken bag or attempt to reuse old paper bags Obtaining new paper bags e Youcan obtain new paper bags form your nearest Sanyo dealer Be sure to specify only genuine Sanyo vacuum cleaner bags If bags from any other manufacturer are used it may have adverse effects on vacuum cl
10. power cord from the wall outlet and contact the place of purchase or your nearest Sanyo self servicing dealer or call toll free 1 800 421 5013 USA Only Problem Possible cause Motor does not operate when Is the cord plugged completely into the power outlet the switch is depressed to the Check the connection of the cord into the power outler for complete insertion PRP positon e Is the cord damaged where it is connected to the plug or are you pulling on the cord too hard or bending it Have the cord replaced at a Sanyo self servicing dealer or a Sanyo service station Suction does not improve Is the electrostatic micron filter dirty after replacing the bag Replace the electrostatic micron filter e 5 the turbine brush or the hose clogged If so clean it out e The lever is not set to the RUG position Set the lever to the RUG position e Is the turbine brush or the hose clogged If so clean it out The agitator dose not operate SC 180 only REPLACEMENT PARTS e Be sure to use only genuine Sanyo replacement parts e Paper bags electrostatic micron filters and other replacement parts can be obtained from your nearest Sanyo dealer e f there is on Sanyo dealer in your vicinity please contact a Sanyo service center or call toll free 1 800 5013 USA Only Part Name amp Illustration Paper bag Electrostatic micron filter 10 SANYO UPRIGHT VACUUM CLEA
Download Pdf Manuals
Related Search