Vipower VP- 1028LSF IDE TO USB2.0 SWAPRACK MOBILE RACK Drive Case - VP-1028
Contents
1. USB I O Expansion Solt Bracket WiPowEIR wwwvipowercom VP 1028 Rev 1 0 04 14 20052. VP 1028 USB 2 0 out Frame to IDE Inner Tray with Backup Module Installation Guide Exploded View Step 2 2 3 Perform the following steps to enable the USB function of the VP 1028 USB 2 0 out Frame to IDE Inner Tray with Backup Module a With the computer cover removed ensure the power is OFF and all power cords and cables from the back of the computer are unplugged b Select an unused I O expansion slot at the back of your computer and remove its slot cover Save its screw for securing the USB slot bracket c Install the USB slot bracket and secure with the previously removed screw d Connect the small 5 pin connector on the bracket to the USB connector on the back of the VP 1028 out Frame eg Mounting Screw USB connector to Computer s USB Port USB Bracket Installed in VP 1028 USB 2 0 out Fra Connection to VP 1028 out Frame installed in Computer VP 15 IDE Inner Tray e Replace the computer s cover and reconnect the power and other cable connections And plug the bracket mounted USB connector into any available USB port on the computer Latch Lock Power Switch Hardware Installation Step 1 1 Turn OFF the power to your computer and any other connected peripheral devices Follow the precautions for static electricity discharge a Discharge any static electricity build up in your body by touching a grounded metal surface such as the computer case if plugged in b During installat
3. he 3 5 HDD inside the VP 15 IDE inner tray Secure the HDD in place using the supplied mounting screws Use the mounting holes on the sides Power Connector Mounting Screws Si sedis Screws VP 1028 out Frame Replace the VP 15 IDE inner tray cover by sliding it back on w __ Mounting Screws 5 25 inch Drive Bay Step 2 1 1 Connect an available 4 pin power cable from the system s power supply to the 4 pin connector on the back panel of the VP 1028 USB 2 0 out Frame Step 4 Insert the VP 15 IDE Inner Tray into the VP 1028 USB 2 0 out Frame installed in the computer And slide the latch lock switch on the VP 1028 USB 2 0 out Frame LEFT to LOCK Power USB Connector Connector VP 1028 out Frame USB and Power Connectors Unlock OFF Position Position 2 Installation for USB Interface The computer must be USB ready in order to implement the USB feature of the VP 1028 USB 2 0 out Frame to IDE Inner Tray with Backup Module An I O expansion slot bracket with a USB interface cable is supplied for connecting the VP 1028 out Frame to an available USB port on the computer VP 1028 USB 2 0 out Frame to IDE Inner Tray with Backup Module mm ww www www ww www ww ww ww ww i i i Ce Connect to Connect to USB connector USB Port on on VP 1028 out Frame Computer The hardware installation is complete The VP 1028 USB 2 0 out Frame to IDE Inner Tray with Backup Module is ready to use
4. ion procedures avoid any contact with internal parts Step 3 Before insert the VP 15 IDE Inner Tray into the VP 1028 out Frame installed in the computer perform the following steps to mounting a Drive in the VP 15 IDE Inner Tray 1 Remove the VP 15 IDE inner tray cover by Unplug the power cord from the back of the computer And remove your computer s cover sliding it towards the back of the unit and the computer s front cover plate from the 5 25 inch drive bay you plan to install the VP 1028 into Slide the latch lock switch on the front panel of the VP 1028 USB 2 0 out Frame RIGHT to UNLOCK Remove separate the VP 15 IDE Inner Tray from the VP 1028B USB 2 0 out Frame by lifting the handle and pulling it out Slide the VP 1028 USB 2 0 out Frame into the 5 25 inch drive bay 5 Position the VP 1028 USB 2 0 out Frame so its mounting holes align with the 5 25 inch drive bay s mounting holes Secure with the supplied mounting screws two on each side If you plan to install a drive that features removable media such as a zip TR 4 tape MO LS 120 drive or ATA Flash memory reader remove the center part of the front panel Connect the cables from the VP 15 IDE inner tray to the appropriate pin connecotrs of the 3 5 HDD Attach the power and IDE cables from the VP 15 IDE inner tray to the 3 5 HDD The colored stripe Mounting on the IDE cable should be closest to the power Screws connector Carefully position t
Download Pdf Manuals
Related Search