Zanussi FLS 522 C Washer/Dryer User Manual
Contents
1. 4 rinses Spin 5 min Wash at 60 C 4 rinses Spin 5 min Wash at 40 C 3 4 rinses Spin 5 min Load bleacher 4 4 rinses Spin 5 min load additif 5 1 rinse Spin 5 min 6 Drain water Spin 2 5 min 9 This 60 programme is the reference programme for the Energy label according to the article 2 paragraph 1 of the EEC Directive 92 75 PROGRAMS FOR SYNTHETICS MIXED AND WOOL Recommended load max 2 kg wool max 1 kg PROGRAM MIXED FABRICS FAST COLOURS SYNTHETICS DELICATES WOOL SILK RINSES DELICATES ADDITIVES SOFTENER DRAIN DEGREE OF SOIL heavy soil normal soil normal soil normal soil COMPARTMENTS NNSA AS MAXIMUN WATER TEMP 60 60 40 40 POSITION PROGRAM DESCRIPTION Prewash at 30 C 7 Wash at 60 C 3 rinses Stop with water in the drum Wash at 60 C 8 3 rinses Stop with water in the drum Wash at 40 C 9 3 rinses Stop with water in the drum Wash at 40 C 1 0 3 rinses Stop with water in the drum 1 1 3 rinses Stop with water in the drum Load additif 1 2 1 rinse Stop with water in the drum Drain water 1 3 drum stands still For draining the water once the cycle is finished situate the timer 13 right in its place 28 WASHING HINTS Sort the laundry according to the type of fabric colour fastness and how dirty it is When washing curtains remove the hooks It is essential to wash new coloured items separ2. a few seconds Position the end of the drain hose in a bowl on the floor Run the draining program for a few seconds This way you make sure now water at all remains in the appliance which could freeze and thus damage it and its surroundings When you need to start the machine up again make sure that the room temperature is above 0 C SERVICING Before contacting your local Service Force Centre check your machine against the simple maintenance guidelines given below The appliance does not start up Check if the door is closed properly Check if the appliance is plugged in Check the fuse Check if the program dial is in the correct position THE MACHINE DOES NOT FILL Check if the water tap is on Check if the tap is clogged Check if the inlet hose is bent Check if the water inlet filter is clogged THE MACHINE EMPTIES AS IT FILLS The end of the drain hose is too low see page 25 THE MACHINE DOES NOT DRAIN OR SPIN Check if the drain hose is bent or squashed Check if the drain filter is clogged Check if the selected program includes spinning Check if the Rinse Hold botten is pressed THE MACHINE LEAKS OR OVERFLOWS Too much washing powder Unsuitable washing powder Check the joints for leaks It is rather difficult to see the water running along a hose THE MACHINE VIBRATES OR IS NOISY Check if all transport devices have been removed Check if the
3. appliance touches the walls or furniture Check if the legs are adequately levelled and the nuts tight If after above checks there is still a fault call your Local Service Centre Please make sure you give the model and serial number of the appliance and the purchasing date IMPORTANT REMARK This washing machine is provided with the latest technical advances in washing and water level reduction It is quite right that you do not see the water through the door 31 35 292 406 0
4. temperature coincides with the marker On the program table you will find the most apropriate temperature for each kind of washing Selecting X any program can be run through with cold water This will ensure a saving in electricity consumption 6 PROGRAM SELECTOR To select the required program turn the control clockwise until the marker on the top coincides with the number of the required program reference mark on the control panel If at any chance you pass by the required number NEVER TURN THE CONTROL ANTICLOCKWISE just continue clockwise until the required number is reached again HOW TO USE THE CONTROLS DETERGENT AND ADDITIVES 1 LOADING THE WASHING MACHINE Load the laundry loosely alternating large items with small ones Do not overload the washing machine but always try to use its utmost capacity in accordance with the type of fabric Reduce the quantity when washing very dirty or fluffy laundry Once the machine is working and you wish to add any item you must stop the program IMPORTANT REMARK This appliance is provided with a security device to avoid opening during the cycles Open it only when absolutely necessary and wait 2 to 3 minutes after you have stopped the machine to give the safety device time to unlock 2 DOSE THE WASHING POWDER Pull the handle to open the dispenser Enter the advised quantity of washing powder into compartment UI For prewash use compartment 1 3 DOSE THE ADDI
5. too The manufacturer declines any liability in case of accidents or incicents should these safety measures not be observed Never touch the washing machine or any electric appliance while standing on a wet floor or being barefoot 25 DESCRIPTION OF THE CONTROLS Control panel 5 gt o D 2 8 4 1 WASHING POWDER DISPENSER The dispenser is provided with 4 compartments marked with the following symbols UJ Prewash symbol shows the compartment for the prewash detergent UL Wash symbol shows the compartment for the washing detergent smooth symbol shows the compartment for the smoothing additives bleach symbol shows the compariment for the bleaching additives 2 ON OFF LAMP It lights when the appliance is operating 3 1 2 LOAD BUTTON 2 Pressing this button before starting the intense program there will be one rinse less which leads to energy and water saving 26 5 6 4 NO SPINNING BUTTON amp Pressing this button before starting the intense washing program all spinnings will be excluded The other steps of the program remain unchanged 5 TEMPERATURE SELECTOR This control allows you to select the temperature of the washing cycle in accordance with the kind of clothes to be washed Turn the control until the reguired
6. CE AND CLEANING Before any maintenance or cleaning is carried out you must DISCONNECT the appliance from the electricity supply EXTERNAL CLEANING Clean the exterior cabinet of the appliance with neutral soap and water only and then try thoroughly CLEANING THE DISPENSER DRAWER AND THE RECESS Pull the drawer to remove slightly at first till the stop then pull hard Flush well under a fast running tab Clean the recess with a small brush Replace the drawer CLEANING THE DRAIN FILTER A clean filter is important for correct functioning of the washing machine and it should therefore be cleaned regularly Small objects left in the pockets and yarn ist retained here Unscrew the filter completely turning it anticlockwise Remove the filter and clean it under a fast running tap Replace the filter turning now clockwise and tighten it CLEANING THE WATER INLET HOSE FILTER If it takes longer to fill up the washing machine it is time to check the water inlet hose filter it may be clogged Turn off the water tap Unscrew the fixing nut of the inlet hose Remove the filter from the electrovalve and clean it with a hard bristle brush and replace it Screw on the nut thoroughtully 30 THE DANGERS OF FREEZING If the machine is exposed to temperatures below 0 C certain precautions should be taken Turn off the water tap and unscrew the inlet hose Select a wash program and run for
7. INSTRUCCIONES MANUAL DE INSTRU ES INSTRUCTIONS LAVADORAS AUTOMATICAS M QUINAS DE LAVAR A ROUPA WASHING MACHINES FLS 432 C FLS 522 C CONTENTS Technical specifications fume dali doida dede da P g MEV Sis screens ioga E ai Sa da ES P g Unpacking and 1 518 10 P g SECA TT P g Ugo ama A Pag HS i Pag teil et21 Keleja 91 107 17 01 essre TAA A a mee Pag Descriptions of the CONN access i ada ja gs e saga P g COMO DANO PM ne gi As onda 22 dA ia P g USC O CONTOS na na e aida naat KAA ap P g Washing powder QISDE RISE sia P g 8197005 140 aaa ni negada e ZOO E Pag NOS IN AIAN NG DUNO rcp esc SS P g Temperature
8. SO ON a a P g TTT Ta Pag How to use controls detergent and additives Loading the washing Machine a iania P g Dose de Washing POMOS E dies P g DOSE ne GOES P g RR RR ee eee E q RR RR re P g DE IRC id ii P g RC E ii E a Ru E aaa P g see iii iii E P g Programs TOF cotton and P g Programmes for synthetics mixed and wool e P g WaS MNG EO ssa E E P g 4020 TI WY AS q lp SB AG q sche RECORRE PN RN a A O ON A aaa e Pag DES aaa RS A E P g TANS OES NS 1 a P g Maintenance and Med cee P g Elena P g Cleaning the dispenser drawer and lhe receSS aiaisa suiiesniadinto tirar csasaiindadasa sadia Ciranda kuid va ainda danad
9. TIVES If you wish to use additives enter the softener in the compartmente with the symbol ee and the bleacher in the compartment with the symbol Never exceed the MAX level 4 SELECT THE TEMPERATURE Turn the dial clockwise to the desired temperature 5 SELECT THE PROGRAM Turn the dial clockwise until the marker reaches the desired program 6 START Before pressing the On off Button check if The door is properly closed The appliance is plugged in The water supply tap is turned on The drain filter is tight The drain hose is adequately positioned Pull the program dial up to you till it klicks The pilot light comes on and the program will begin 7 STOP The washing machine stops automatically once the cycle is finished the pilot goes out Open the door 2 to 3 minutes after the end of the program to give the safety device time to unlock Close the tap and unplug the appliance Leave the door ajar for a few minutes for the steam to get out 27 PROGRAMS FOR COTTON AND LINEN Recommended load max 4 5 kg PROGRAM WHITES with prewash WHITES without prewash FAST COLOURS NON FAST COLOURS RINSES ADDITIVES SOFTENER SPIN DEGREE OF SOIL heavy soil normal soil normal soil normal soil COMPARTMENTS TO USE RN RAR R MAXIMUN WATER TEMP 90 90 60 40 POSITION PROGRAM DESCRIPTION Prewash 1 Wash at 90 C 4 rinses Spin 5 min Wash at 90 C 2
10. a P g Cleaning eau dae e e Pag Cleaning the water m e maintain etiline P g The dangers of 5 Pag ee sapo E S OO P g TECHNICAL SPECIFICATIONS DIMENSIONS Width 60 cm Height 85 cm Depth 55 cm ELECTRICAL CONNECTION Voltage 220 230 V 50Hz Max Power Absorbed 2 200 W 10A WATER PRESSURE Minimum 5N cm Maximum 80N cm MAXIMUM RECOMMENDED LOAD Cotton Linen 4 5 kg Synthetics delicate fabrics 2 kg Wool 1 kg SPIN SPEED Maximum MOD FLS 432 C 400 r p m MOD FLS 522 C 500 r p m This appliance marked CE complies with the directives 89 336 CEE on electro magnetic compatibility 73 23 CEE on electric material designed to be used with certain power limits 22 WARNINGS THESE WARNINGS ARE PROVIDED IN THE INTEREST OF SAFETY YOU MUST READ THEM CAREFULLY BEFORE INSTALLING OR USING THE APPLIANCE It is most important that this instruction book should always be at hand for the user for reference Should the appliance be sold or transferred to another owner or should you move house and leave the appliance always ensure that the book is left with the appliance in order
11. ately when washing them for the first time When washing fabrics requiring different wash temperatures together always select the lowest one White items should NOT be washed with coloured ones For wool use gentle detergents only in small quantities Only wool marked PURE NEW WOOL WASHABLE PRESHRUNK can be washed in the machine using the wool program other types of wool should be washed by hand or dry cleaned Some stains such as fruit wine grass rust blood etc are difficult to remove and should be treated before washing with specific products which can be found in most household shops In any case they should be treated immediately later on they are difficult to remove Damp laundry should be hung out to dry as soon as possible after finishing the wash Knitwear and woollens should be dried flat away from direct sunlight On the care labels in most clothes wash code symbols can be found which help you to select the adequate wash program You are advised to observe and follow these instructions On the following table you will find the meaning of the symbols TABLE OF SYMBOLS LOAD THE WASHING MACHINE Check the quantity you are going to wash for each cycle It is rather difficult to weigh all the pieces to be washed We therefore advise you Cotton and linen fill the drum without pressing Synthetic resistant fill two thirds of the drum Delicates and wool fill half the drum TEMPERATURES Yo
12. f in doubt consult the manufacturer of that item HM Before washing ensure that all pockets are empty and buttons and zips are fastened EH Any objects such as coins safety pins nails screws stones or any other hard sharp material can cause extensive damage and must not be placed into the appliance nor left in the pockets Avoid washing frayed or torn articles and treat stains such as paint ink rust and grease before washing Garments which have been in contact with volatile petroleum products should not be machine washed If volatile cleaning fluids are used care should be taken to ensure that the garement is dry before placing in the washing machine Wash small items such as socks laces washable belts etc in a washing bag or pillow case as it is possible for such items to slip down between the tub and the inner drum Only wash the advised quantity of delicate fabrics Damage to the fabric can ensue if you over fill Refer to the manufacturer s recommendations of quantities Do not overload the appliance see the relevant WASHING PROGRAM section Pets have been known to climb into washing machines Please check your drum before use The glass door becomes very hot during the wash cycle Keep children away from the appliance whilst it is in operation Before opening the door look through the window to check if the water has been drained Should there be water do not open before draining If in doub
13. n connection pipe of 3 4 gas for the water supply a sink a wash basin or a drainage system in the wall Previously check if it is not a hot water tap the running water is clean If not run off a reasonable amount of water to flush out any debris that may have collected in the pipes Have the permanent drainage system in the wall checked by a plumber Place the enclosed rubber joint delivered in a plastic bag together with the appliance A Fig 6 at the very end of the inlet hose and carefully screw the pipe to the tap taking care not to damage the screwdrive and fix the nut well on to the end in order to avoid leaking If necessary turn the hose adequately by unscrewing the nut at the rear of the appliance Now tighten the nut anew to avoid leaks Open the tap and asure that it does not leak and close it again Place the discharging hose in a washbasin or sink with the aid of the bent piece delivered separately The bent piece has to be entered into the tube s mouth in order to assure the support Aforesaid piece allows the hose to be fixed to the wall by means of an opening on the upper part and that way the hose does not move and its falling is avoided 1 5 m Maximum IMPORTANT The distance from the floor to the highest part of the hose should be between 60 to 90 cm It is advised to be between 60 and 70 cm The hose must not be bent nor twisted to avoid cloggi
14. ng Should a prolongation of the discharging hose be unavoidable this must never surpass 1 5 m and must be of the same diameter as the original hose Make sure the hoses are not too tense LEVELLING Level the appliance by loosening or tightening the feet Once in the right position fix the feet by pushing the nuts against the base of the case Accurate levelling will prevent vibration noise and displacement of the appliance during operation Some vibration is inevitable especially if placed ona wooden floor Wooden floors are particularly susceptible to vibrations For advice consult a builder If posible always place the appliance on a solid floor 8 z E Alo AI s s el E DI OQ O O OI ELECTRICAL CONNECTIONS Before plugging the appliance make sure that 1 the mains of your installation is the same as on the rating plate of your appliance the plate is sticked to the rear of the appliance 2 The meter the fuses the wiring and the socket outlet can support the max power absorbed stated on the rating plate 32 The socket base and the plug must fit in adequately without any reducing interposition multiple outlets or adapters If necessary replace the socket outlet by an adequate one The applicable rules for electrical security require an adequate earthing The plug of the appliance is provided with such a device Make sure your socket outlet is provided with an adquate earthing
15. t read section INSTRUCTIONS FOR USE Always unplug the appliance and turn off the water after use Leave the porthole slightly ajar between washes to preserve the door seal Unplug the appliance before cleaning This product must be serviced by an authorised Service Centre and only genuine spare parts should be used Do not try to repair the appliance yourself Repairs carried out by inexperienced persons may cause injury or serious malfunctioning of the machine Contact your local Service Centre Always insist on genuine spare parts 23 UNPACKING AND INSTALLATION TRANSIT SECURITY BARS Before starting the machine up the transport security bars must be removed as follows You are advised to keep all the transport security bars in case the appliance has to be transported again 1 Unscrew and remove the three rear screws by means of a key 2 Lean the appliance back on the rear and fit one of the polystyrene angles between the appliance and the floor Make sure the hoses are not squashed 3 Carefully remove the plastic bags on the right and the left pulling them to the centre of the appliance 4 Place the machine in an upright position and remove the three plastic bolts 5 Plug the 3 holes with the plastic plugs which you can find in the envelope containing the instruction booklet 24 HYDRAULIC CONNECTION There should be a COLD WATER tap near the washing machine with a screwing o
16. that the new owner can get to know the functioning of the appliance and the relevant warnings CHECK THE APPLIANCE UPON RECEPTION AND SHOULD ANY DAMAGE BE OBSERVED CALL YOUR DISTRIBUTER BEFORE YOU MAKE IT WORK M Children must not be allowed to temper with the controls or play with the product The appliance is heavy Care should be taken when moving it Do NOT hold yourself on the controls H All packing and transit bolts must be removed before use HM Serious damage can occur to the product and to property if this has not been adhered to See relevant section unpacking in the instruction booklet The washing machine must be unplugged when removing the interior transit bolts Do not plug the appliance before finishing the removal of the transit bolts and the fixing of the caps in the holes where the security bolts were If the appliance is to stand on a carpeted floor make sure that there is space between the carpet and the supporting feet of the appliance for the air to circulate freely around Any electrical and or plumbing work required to install this appliance should be carried out by a qualified electrician and or plumber or competent person It is dangerous to alter the the specifications or attempt to modify this product in any way Care must be taken to ensure that the appliance dos not stand on the electrical supply cable HW Only wash fabrics which are designed to be machine washed I
17. u are advised to wash whites at a temperature of 60 C If the laundry is not very soiled this will be enough and it is energy saving If you want to wash whites without temperature you must choose the program 2 Coloured fabrics are advised to be washed at 40 C although they would stand 60 C When washing together dark and light colours the temperature should not exceed 40 C Synthetic white and light coloured fabrics can be washed at 60 C but here also 40 will do if they are not very soiled Dark synthetics delicate fabrics and wool must be washed at a temperature lower than 40 C If one of the labels is marked 30 C select 30 C for the whole cycle The symbols on the labels are of great help for the wash care and treatment STRONG WASH Max wash temp 60 C WwW A Bleach in cold water Max wash temp 95 C DELICATE WASH BLEACHING Hot iron max 200 C A E Dry cleaning in perchlorethylene petrol pure alcohol Dry cleaning in all solvents Max wash temp 40 C cd Hot iron max 150 C NET Max wash temp 30 C Hand wash Do not wash at all A Do not bleach cl Hot iron max 100 C Dry cleaning in Do not petrol pure alcohol dry cleaning R111yR113 Do not iron R 111 yR 113 m On the line pen High 20 temperature Dos NA temperature On clothes hanger A Do not tumble dry Tumble dry 29 MAINTENAN
Download Pdf Manuals
Related Search