Worksaver HK-305 Network Card User Manual
Contents
1. x 2 hex head bolts attach the main frame of the kit to the swinging drawbar mount NOTE Use the two holes in the swinging drawbar mount that are parallel Tighten these bolts securely Open the snap couplers on your tractor and place the lift arm leveling assemblies into the snap couplers and then snap them back down On both the outer left hand and the right hand ends of the hitch main frame start the ends of the pull pins ref 5 through the outer pull bracket ears Position the pull pin so that the end with NO hole goes to the inside As soon as the end of the pull pin passes through the first outer pull bracket ear slide the pull pin spacer ref 6 on the pin so that it is located between the first and second pull bracket ears Slide the pull pin in further until the end is just entering the second pull bracket ear Then place the forward end of the lift arm between the large side plate on the main hitch frame and the second pull bracket Slide the pull pin in further so that it goes through the ball end of the lift arm and enters the hole in the large side plate Rotate the pull pin so that the holes in the pin are horizontal Slide the spacer tube and adjust the pull pin so that a large 5 16 hairpin clip can be inserted through the center hole of the pull pin This locks the pull pin in place on each side Raise the lift arms sliding them between the clevis ends of the lift arm leveling assemblies and pin them2. The stabilizer bars should be used whenever possible as they provide rigidity and stability to the unit plus added strength The stabilizer bars have threaded stubs so their length can be adjusted so the spread of the lift arms can be increased or decreased to accommodate the different width of Category I and Category II tools This kit is designed to lift up to 1600 lbs but of course lifting capacity is dependent on the pressure and condition of the tractors hydraulic system You will also find that the closer the load is kept to the tractor the more you will be able to lift A CAUTION Be sure your tractor is in good condition and properly equipped with counterweights Read all the safety precautions and make sure all tractor operators are familiar with the safety rules of tractor operation A CAUTION When using a 3pt Hitch rear blade in a reverse position bulldozing use extra care DO NOT RAM BLADE into dirt or packed snow piles Tractor lift arms and the blade are not built to take high impact loads in this position RAMMING backwards can also dislodge operator from seat and or tractor controls resulting in possible serious injury or death Always ease the tractor into the load It may be necessary to reposition and take less bite on the material to move it safely Watch for and avoid hidden obstructions i e buried pipes rocks concrete piers uneven concrete slabs stumps etc when operation This is espec
3. in place Install the stabilizer stub pins ref 34 in the forward holes of each lift arm Have the large 7 8 diameter of the stub pin to the outside of the lift arm and the threaded nut to the inside Do not use a lock washer under the nut Place a screwdriver or small bar through the linchpin hole and tighten the nut on the stub pin Place one end of the stabilizer bars ref 21 over the ends of the pull pins on the outer ends of the frame and secure with linchpins The stabilizer bars have threaded ends and can be adjusted to the correct length by turning the center barrel Adjust the stabilizer bars then slide the other end over the stabilizer stub pins in the lift arms Secure in place with linchpins NOTE When connection the hitch to an implement it will be necessary to remove the lift arm end of the stabilizer bar from the lift arm This allows the lift arm to swing out and be installed on the pull pin of the implement After the lift arms are connected to the implement Continued on page 2 Instructions Continued from page 1 the stabilizer bars need to be reconnected and adjusted so that the implement is centered behind the tractor Remove the two 2 U Clamps from the top link bracket and then slide them over the rocker shaft of the tractor Place the top link bracket against the tractor rocker shaft with the ears extending out toward you Slide the U Clamps over the top link bracket and bolt them back in place Sl
4. OWNERS Packing Maintenance MANUAL Assembly amp Mounting Repair Parts Operating Instructions MODEL NO HK 305 CAUTION For Operation Read Rules And Instructions Carefully STATEMENT OF POLICY It is the policy of Worksaver Inc to improve its products where it is possible and practical to do so Worksaver Inc reserves the right to make changes or improvements in design and construction at any time without incurring 3 PT HITCH ADAPTER KIT obligation to make these HK 305 changes on previously manufactured units For A C Models WD amp WD45 Tractors A CAUTION THE FOLLOWING SAFETY PRECAUTIONS SHOULD BE THOROUGHLY UNDERSTOOD BEFORE ATTEMPTING TO BEGIN ASSEMBLING THIS MACHINE Select an area for assembly that is clean and free 6 After completing assembly thoroughly inspect of any debris which might cause persons the machine to be sure that all nuts bolts working on the assembly to trip hydraulic fittings or any other fastened Do not lift heavy parts or assemblies Use crane assemblies have been thoroughly tightened jack tackle fork trucks or other mechanical Before operating the machine thoroughly read devices the operation section of your operator s Preview the assembly instructions in your manual operator s manual before proceeding further Before operation read the maintenance section If the assembly instructions call for parts or of your operator s manual to be sure that any assemblie
5. condition so as to command the lowest freight rates Shipment consists of 3 cartons TRACTOR PREPARATION Before installing the adapter kit it is necessary to remove the existing swinging drawbar assembly Check the threaded holes that go into the tractor housing and make sure the threads are in good condition and that the holes are clean A CAUTION an air hose is used to blow any loose rust or dirt from the holes be sure safety glasses are used to prevent particles from entering an eye Be sure tires and rims are in good condition Inflate tires to the proper recommended air pressure Check the tractor s hydraulic system Refer to your tractor operator s manual or dealer for any adjustments necessary to put the hydraulic system in good working order I amp T shop manuals will list most specifications and adjustment instructions available from most farm equipment dealers Check the shield over the PTO stub shaft Make sure it is in good condition and bolted securely to the tractor Purchase a new shield if old shield is damaged or missing You may have to use a tractor salvage yard for replacement parts on older tractors It is recommended that a ROPS Roll Over Protection Structure be installed on all tractors Contact your local dealer for a ROPS for your tractor ASSEMBLY In order to mount this kit it will first be necessary to remove the swinging drawbar and mounting brackets from your tractor Using the 34
6. ially of concern when removing snow MAINTENANCE Check all bolts and nuts to be sure they are tight Periodically oil the following a Top link upper 3 link threads b Cylinder pins c Ball sockets d Leveling assembly threads e Stabilizer bar threads v Keep children away from danger all day every day Equip tractors with rollover protection ROPS and keep all machinery guards in place v Please work drive play and live each day with care and concern for your safety and that of your family and fellow citizens Page 2 EXPLODED PARTS VIEW OF FOR HK 305 Obey AII Safety Warnings Page 3 REPAIR PARTS FOR HK 305 3 PT Hitch Adapter Kit PART DESCRIPTION Moin Frome Weldment S03 i amp Dia 1 Arm weldm ni 4 no ra iiye r 2 ir 19 zadal Mul 5ra 11M eT Siobilizer Aasembly Parta 18 21 Borrel PPE PA _ _ _ _ _ _ _ __ pio Stabilizer End FAO Pe s90s18 Stabilizer Eng DAO zadania 8 Ex 26 25005 Mul 12 1 tul Hew _ __ FFA GB Borrel 1 dra PH w de Lg o O End RH pA Te 1421 TH am He 31 1 te ed Handle 32 Soo Top J AK 33 Linck Pin frig 14 la4 ae b Fin AK we io ghee M 2503135 Bol J 4 1 NC w 3 Heod Gr PSB 250G03 p 4_ 10h Gafeiy Sign Coutio
7. ide the lug end of the top link between the ears on the top link bracket and pin it in place with the top link pin and linchpin provided NOTE This kit is equipped with the mounting brackets necessary to use the existing swinging drawbar on your tractor and mounts in the same way OPERATION Two 2 holes are provided on the lift arms to connect to the lower ends of the leveling assemblies The forward holes will provide the greatest lifting range for the ball ends of the lift arms The rear holes will allow heavier loads to be handled by the hitch The adjustable screw type leveling assemblies will provide additional adjustment in the lifting height of the hitch NOTE BE SURE THAT AT LEAST 1 4 OF THREAD ON EACH END IS ENGAGED INTO THE THREADED BARREL OF THE LEVELING ASSEMBLIES The adjustable screw type top link can also be shortened or lengthened to adapt different implements and can be used to obtain various degrees of pitch on the implements you are using The 2 way ball sockets on the end of the lift arms will allow you to connect to either Category I or Category II implements If the drawbar or implement you mount has Category I 7 8 dia pins then make sure the balls are turned so that the 7 8 dia holes are used IMPORTANT If the larger 11 8 dia holes are used with the smaller 7 8 dia pins the ball holes will wear rapidly in an uneven pattern and make the entire ball socket eventually unusable
8. n Soy Cleor of Arma 38 10108 Safely Sign Worning Pull from Drowbor M 4 CAUTION bar or 3Pt lower lift arms only Failure to hitch SI A CLEAR properly could Y cause tractor to Flip over result OF RAISING ARMS ing in serious injury or death 101039 Fa a FE I T u b 1 Page 4 A SAFETY PRECAUTIONS MOST ACCIDENTS OCCUR BECAUSE OF NEGLECT OR CARELESSNESS AVOID NEEDLESS ACCIDENTS BY FOLLOWING ALL OF THE SAFETY PRECAUTIONS LISTED BELOW Machinery should be operated only by those who are responsible and are authorized to do so Stop the engine lower all equipment lock the brakes and remove the ignition key before dismounting from the tractor Never stand between tractor and implement while tractor is being backed to hitch Loose fitting clothing should not be worn to avoid catching on various parts Detach implement in area where children normally do not play When performing adjustments or maintenance on an implement first lower it to the ground or block it securely at a workable height Only a qualified operator should be permitted on tractor when in operation no riders allowed Make certain everyone is in the clear before starting tractor or raising or lowering equipment Operate the tractor and implement only while A heavy load can cause instability of the tractor Use extreme care during road travel Slow down on turns and watch out for bumps Tractor may need front counter weights
9. r family and fellow citizens MAKE EVERY DAY WHEN ORDERING REPAIR PARTS ALWAYS GIVE THE FOLLOWING INFORMATION PART NUMBER PART DESCRIPTION MODEL NUMBER NAME OF ITEM of improper assembly or operation by the customer 3 parts accidentally damaged 4 failure of parts traceable to improper care 5 parts failing through use of implement for purposes other than those for which it was designed The obligations assumed by Worksaver and the limitations expressed herein are in lieu of all other warranties expressed or implied MARCH 2001 WORKSAVER INC P O BOX 100 LITCHFIELD IL 62056 0100 Phone 1 217 324 5973 Fax 1 217 324 3356 Web Site www worksaver com E Mail sales worksaver com
10. s to be blocked up use only blocking parts requiring lubrication such as gearboxes material that is in good condition and is capable are full to avoid any possible damage of handling the weight of the assembly to be Before operating equipment If you have blocked Also insure that the blocking material is any questions regarding the proper on a clean dry surface assembly or operation contact your Never put hands or any other part of body under Worksaver dealer or representative blocked up assemblies if at all possible WORKSAVER INC P O BOX 100 LITCHFIELD IL 62056 100 Phone 217 324 5973 Fax 217 324 3356 E Mail sales worksaver com Web Site www worksaver com To the Owner Operator Dealer All implements with moving parts are potentially hazardous recognizes the potential hazards and follows reasonable safety practices There is no substitute for a cautious safe minded operator who The manufacturer has designed this implement to be used with all its safety equipment properly attached to minimize the chance of accidents BEFORE YOU START Read the safety messages on the implement and shown in your manual Observe the rules of safety and common sense Instructions The Model HK 305 hitch adapter kit is designed for the Allis Chalmers Model WD WD4S tractors This kit uses the existing hydraulic lift on the tractor to raise and lower the 3 pt Hitch PACKING The adapter kit is shipped in knocked down
11. to counter balance the weight of the implement Reduce speed on hillsides or curves so there is no danger of tipping Avoid driving too close to the edge of ditches or creeks Do not transport implement on public toads without reflectors and slow moving vehicle emblem in daylight and with approved warning lights at night and other periods of poor visibility Due to the width of some implements use extra caution on highways farm roads and when approaching gates Always be sure the implement is in the proper position for transport Keep alert and watch the front as well as the seated in the driver s seat e Reduce speed when transporting mounted implement to avoid bouncing and momentary loss of steering control OWNER S MANUAL MODEL NO FROM ACCIDENTS HK 305 me 3 PT HITCH ADAPTER KIT HK 305 For A C Models WD amp WD45 Tractors WORKSAVER LIMITED WARRANTY Worksaver warrants its implements parts and accessories to be free from defects in materials and workmanship for a period of six 6 months from the date of purchase Upon written approval Worksaver will repair or exchange without charge any part which upon examination by Worksaver or its authorized agent shall disclose to be defective This does not apply to 1 parts that have worn out in normal use 2 parts broken because rear when working with the implement Please work play and live each day with care and concern for your safety and that of you
Download Pdf Manuals
Related Search