Home

VocoPro DTX-9909K Stereo Receiver User Manual

1. Basic Functions Turning the Power On and Off 1 Press the POWER button on the front panel to turn the power on Initializing will appear in the display panel After three seconds of initializing the unit will be ready to operate Press the POWER button on the front panel again to turn the receiver off Turning Standby On and Off 1 When the receiver is on press the 0 button on the remote control to enter Standby mode POWER OFF will appear in the display panel Press the 0 button on the remote control again to exit Standby mode Initializing will appear in the display panel After three seconds of initializing the unit will be ready to operate NOTE In Standby mode the DTX 9909K con sumes a small amount of power in order to receive infrared signals from the remote control Selecting an Input Channel Available Input channels e DVD e AUX1 e AUX2 e AUX3 e CD e TV e TUNER e TAPE e OPT1 e OPT2 e COX1 e COX2 e COX3 e 7 1 CH Digital channels are not available in Zone 2 Zone 2 is reserved for analog output Hemote Control Use the Input Select buttons to select an input channel CHE oo TAPE COX1 7 1 INPUT TV AUX3 DVD OPT1 QO AUXe COX3 TUNER AUTO AUX1 0PT2 Q 7 SIRE og e Front Panel Input Adjust control knob Use this knob to cycle through the available input channels when the DTX 8808K is in Music Mode The DTX 9909K is in
2. buttons Use the buttons to scan through radio stations Press the button to scan down and the button to scan up 35 Memory button Press this to enter Memory Mode In memory mode you can store the current radio station to one of the preset numbers About Karaoke Mode and Music Mode The DTX 8909K automatically enters Karaoke Mode when a microphone is connected to either of the microphone inputs on the front panel When no microphones are connected it will be in Music Mode Descriptions and Functions Display TUNER CD AUX DVD VIDEO TV VCR 6CH 8CH MEMORY STEREO TUNED SLEEP dts nO NEO 6 VIRTUAL HHH C Q DSTI GIL DOEK DO PL Decoder indicators Indicates which decoder s is being used Input source indicators Light up to indicate which input source is being used Volume level indicator 98G Indicates the volume level Headphone indicator G Lights up when headphones are connected to the headphone input Multi information display Shows the name of the current sound field program and other information when adjusting or changing settings Output speaker indicator Shows which speaker outputs are being used UB Front Left channel KS Front Center channel Front Right channel EB Surround Left channel Surround right channel E13 Subwoofer channel GEIB Surround Back Left channel Surround Back Right channel MUTE mx Lit when the mute function is on
3. The speaker layout below shows the standard ITU R speaker setting You can use it to enjoy CINEMADSP multi channel audio sources and THX More than 11 8 80cm Front Speakers FR and FL The front speakers are used for the main source sound plus effect sounds Place these speakers an equal distance from the ideal listening position The distance of each speaker from each side of the video monitor should be the same Center Speaker C The center speaker plays the center channel sounds dialogue vocals etc Align the front face of the center speaker with the front face of your video monitor Place the speaker directly between the front speakers and as close to the TV monitor as possible NOTE If for some reason it is impractical to use a center speaker it can be left out but for best results it is recom mended that you use the full system Surround Speakers SR and SL The surround speakers are used for effect and surround sounds Place these speakers behind the listening position facing slightly inwards approximately 5 9 1 8 m above the floor Surround Back Speakers SBR and SBL The Surround Back speakers supplement the surround speakers and provide for more realistic front to back transi tions Place these speakers directly behind the listening position and at approximately 5 9 1 8 above the floor the same height as the surround speakers Ideally these should be positioned with t
4. Connect one end of the Optical cable to the Optical audio output on the player Connect the other end of the Optical cable to either of the Optical inputs on the DTX 89909K rear panel Select the proper input channel on the DTX 8909K Select the DVD input channel for OPT1 and the AUX1 input channel for OPT2 NOTE Make sure the player s video is also connected to the correct input channel Matching up the Correct Video Input OPT1 Video When connecting a player s audio to the OPT1 input make sure that player s video is connected to one of the video inputs on the DVD input channel OPTe Video When connecting a player s audio to the OPT2 input make sure that player s video is connected to one of the video inputs on the AUX1 input channel Selecting the correct input channel Front panel Press the INPUT button on the DTX 9909K front panel until the correct input channel is displayed on the screen Remote Control Press the corresponding input button on the remote control to access the correct input channel i e DVD OPT1 button for the OPT1 input channel or the AUX1 0PT2 button for the OPT2 input channel DVG 888K rear panel DTX 9909K rear panel DVX 880 PRO rear panel Pur DODODO0000 DODODDDODD LIS 7 LA VERNE CALIFORNIA U S A DT
5. sound with DVDs that are labeled with the Dolby Digital EX porey logo ENS EX 29 DTS Neo 6 button Selects DTS NEO 6 mode Use DTS NEO 6 to create virtual 5 1 or 6 1 surround sound from a 2 channel source such as a VCR CD player etc 30 DSP button Cycles through the virtual EG settings CHURCH DISCO HALL JAZZ LIVE STADIUM THEATER and OFF Select the one that best fits the movie or music you are listening too NOTE This option is not available on the 7 1 Input channel or when playing a DVD that is set to Dolby output 31 Dolby Pro Logic IIx button Switches between the Dolby Pro Logic IIx Movie Music modes Dolby Pro Logic lik Movie For 5 1 channel surround sound for DVDs and videos that are labeled with the Dolby Surround Pro Logic Il logo DD Can also be used with stereo movies or TV programs and other 2 channel stereo devices Dolby Pro Logic lik Music For adding 5 1 surround sound to stereo sources such as music CDs and DVDs 32 AM FM Tuner preset buttons Use these buttons to jump directly to preset stations You can program up to 32 stations for each band to its own preset number 33 A B C D Use this button to cycle through the four available radio preset banks Bank A Bank B Bank C and Bank D Each bank can store up to 8 preset radio stations for AM and 8 preset stations for FM Use the AM FM Tuner preset buttons on the remote control to access the preset stations 34 Scan and
6. D Digital Key Control 23 30 Display 33 Display Abbrevations 44 Display screen 23 Dolby 23 DOLBY D 44 Dolby Digital 23 Dolby Digital Dolby EX button 32 Dolby Digital Surround EX 23 DOLBY DEX 44 Dolby Pro Logic IIx button 32 Dolby Pro Logic IIx Movie 23 Dolby Pro Logic IIx Music 23 DSP 24 DSP button 32 DTS 23 DTS DTX ES and DTS NEO 8 b Digi tal Key Control button 23 DTS DTX ES button 32 DTS 96KHz 24bit encoded DVD CDs 44 DTS ES DISC 44 DTS NEO 6 23 DTS Neo 6 32 DTS Neo 6 button 32 DIX ES 23 DVD OPT1 input channel button 31 DVD 7 1 Channel Surround Sound input 29 DVD Component Video Y Pb Cb Pr Cr input 27 DVD L R Stereo RCA inputs 28 DVD RCA video input 26 DVD S Video input 26 Dynamic 39 E Effect 30 Effect and 30 EFF VOLUME 40 F F B EX feedback eliminator button 31 Factory Presets 47 FB EX 42 FB TIME 42 FL VOL 38 FM Antenna 35 FM Coax antenna input 26 Front Left and Front Right speaker outputs 27 Front Speakers FR and FL 43 FRONT speaker terminals 13 FR VOL 38 Full Working Names 44 H Headphone input 25 l Impedence Selector 29 Input Adjust 23 Input button 23 Input Channel 34 Installing Batteries 11 K Karaoke Mode 41 42 Karaoke Mode Off 40 Karaoke Mode On 40 Karaoke Mode Settings 40 Karaoke Mode Settings Menu 40 L LB VOL 38 Listening Modes 44 M Main Menu 23 Manually Presetting Stations 36 Manual Tuning 35 Ma
7. decrease the repeat level Karaoke Mode cont e RVB TIME Microphone DSP reverb time Use this setting to set the reverb time for the DSP micro phone reverb effect NOTE The DSP effect volume must be set loud enough in order to hear the effect Use the Input Adjust knob on the front panel or the and P buttons on the remote control to adjust the reverb time Reverb Time Range O 80 1 Turn the Input Adjust knob on the front panel clock wise or press the button on the remote control to increase the reverb time 2 Turn the Input Adjust knob on the front panel counter clockwise or press the W button on the remote control decrease the reverb time e RVB VOLUME Microphone DSP reverb volume This setting determines how much DSP reverb is present in the microphone signal Use the Input Adjust knob on the front panel or the and buttons on the remote control to adjust the volume for the DSP reverb effect Reverb Volume Range O 80 1 Turn the Input Adjust knob on the front panel clock wise or press the A button on the remote control to raise the reverb volume 2 Turn the Input Adjust knob on the front panel counter clockwise or press the W button on the remote control to lower the reverb volume e FB TIME Reverb feedback time Use this setting to set the reverb feedback time for the DSP microphone reverb effect NOTE The DSP effect volume must be set loud enough in order to hear the effect Use the
8. distortion 196 Output V W of distortion limit Input 1KHz signal output 8Q load distortion 196 CH gain Input 1KHz signal output BQ load Frequency response Input 1KHz signal output 8Q load 1W all the tune at middle point for reference test frequency range 20Hz 20Khz CH separated ratio Separated input 1KHz and 10KHz signal Output 8Q load 1K255 10K250 DVD VIDEO CH cross talk Separated input 1KHz and 10KHz signal output 8Q load 1K265 10K255 Tone range Input 1KHz signal Output BQ load 1W all the tune at middle point for reference Test frequency range 100Hz 10Khz test at 100Hz and 10KHz 8 9 Damp coefficient Under Working condition 8 9 mono work 100Hz 2100 S N Rating output as parameter S NZ75 Aweightz82 excess noise No signal input Use 600 9 resistance short circuit input OUT 802 lt 3 Mic input sensitivity Input 1KHz signal Output BQ load distortion 1 MIC Overload electromotive force Input 1KHz signal Output BQ load distortion 196 Tone range Input 1KHz signal Output BQ load1W all the tune at middle point for reference test at 10QHz and 10KHz 10 2 MIC Frequency response Input 1KHz signal Output 8Q load 1VV all the tune at middle point for reference test frequency range 30Hz 10Khz MIC S N Rating output as reference value S N 60 Aweight 65 Excess
9. input channels to a different location to be played simultane ously with the main zone This is common for home enter tainment setups that have different things playing in different rooms at the same time NOTE Zone 2 does not include any of the digital input channels optical coaxial 7 1 surround sound The L R red and white RCA ZONE2 PRE output jacks on the rear panel can be connected to any self powered input device with RCA inputs i e recording device powered speakers etc What you will need Powered device with L R RCA inputs RCA L R audio cable red amp white Connect one end of the red and white RCA cable to the ZONE2 PRE output jacks on the DTX 8909K s rear panel Connect the other end of the red and white RCA cable to the RCA inputs on the recording device powered speak ers etc Press the ZONE2 button on the front panel to enter Zonee to make changes The number 2 will appear in the display indicating that Zone2 is open Regular output Zone2 output Simultaneous Alternate Audio Device play of two separate audio sources O Getting Connected cont Connecting to the DTX 89909K s Inputs There are 5 available A V input channels which allow you to connect up to 5 A V players to the DTX 9909K DVD AUX1 AUX2 AUX3 and TV 2 2 ie anv AvuUy na O3GIA S O3GIA o o Le o o Choosing A Video Output The DTX 9909K offers t
10. Adjust knob on the front panel counter clockwise or press the W button on the remote control to decrease the delay time e S DELAY Surround speakers delay It may be necessary to adjust the delay for the surround speaker channels to make up for the distance between the speakers Use the Input Adjust knob on the front panel or the and buttons on the remote control to adjust the delay time Delay range O ms 30 ms 1 Turn the Input Adjust knob on the front panel clock wise or press the button on the remote control to increase the delay time 2 Turn the Input Adjust knob on the front panel counter clockwise or press the W button on the remote control to decrease the delay time B DELAY Back Surround speakers delay It may be necessary to adjust the delay for the back sur round speaker channels to make up for the distance be tween the speakers Use the Input Adjust knob on the front panel or the and buttons on the remote control to adjust the delay time Delay range O ms 35 ms 1 Turn the Input Adjust knob on the front panel clock wise or press the A button on the remote control to increase the delay time 2 Turn the Input Adjust knob on the front panel counter clockwise or press the W button on the remote control to decrease the delay time Dynamic Choices MAX maximum STA standard and MIN mini mum Select the Dynamic setting that sounds best for you Maximum High Signal Compression St
11. Input Adjust knob on the front panel or the and buttons on the remote control to adjust the reverb feed back time Feedback Time Range Oms 8Oms 1 Turn the Input Adjust knob on the front panel clock wise or press the A button on the remote control to increase the reverb feedback time 2 Turn the Input Adjust knob on the front panel counter clockwise or press the W button on the remote control decrease the reverb feedback time e OK Karaoke output mode Use this setting to select which speakers will be used for microphone output Use the Input Adjust knob on the front panel or the and buttons on the remote control to cycle through the avail able output modes Choices LR C LR C SL SR L R C and SL SR C L R Microphone output will be in the Front Left and Front Right speakers C Microphone output will be in the Center speaker L R C Microphone output will be in the Front Left Front Right and Center speakers SL SR L R C Microphone output will be in the Surround Left Surround Right Front Left Front Right and Center speakers SL SR C Microphone output will be in the Surround Left Surround Right and Center speakers FB EX Feedback reducer Use this select which Feedback Reducer setting to use Use the Input Adjust knob on the front panel or the and buttons on the remote control to cycle through the avail able Feedback Reducer settings 1 2 3 and OFF Heference Surround Sound Setup
12. Reset the DTX 9909K instructions at the end of this troubleshooting section Move the DTX 8909K away from such equipment Change to a correct source Heplace with a new cable Wait about 1 hour for the DTX 9909K to cool off and then turn it back on e Check the antenna connections Try using a high quality directional FM an tenna not included e Use the manual tuning method e Adjust the antenna position to elimi nate multipath interference e Use a high quality directional FM an tenna not included or use the manual tuning method Troubleshooting cont Problem Previously preset stations can no longer be tuned in The desired AM station cannot be tuned in with the automatic tuning method There are continuous crackling and hissing noises There are buzzing and whining noises The remote control does not function properly Cause e The DTX 8909K has been discon nected for a long period of time The signal is weak of the antenna connection is loose These noises are caused by lightning fluorescent lamps motors thermo stats and other electric equipment A TV set is being used nearby Wrong distance or angle Direct sunlight or lighting from an inverter type of fluorescent lamp etc is striking the remote control sensor on the DTX 9909K e The batteries are weak No batteries are installed or they are installed in the wrong polar direction Remedy Preset the st
13. Video Y Pb Cb Pr Cr input Component Video input for the AUX1 input channel Connect to a TV with Component Video inputs using a set of Component Video cables NOTE If a player s video is connected to this input make sure its audio is connected to an audio input that is on the AUXT input channel 17 AUX2 Component Video Y Pb Cb Pr Cr input Component Video input for the AUX2 input channel Connect to a TV with Component Video inputs using a set of Component Video cables NOTE If a player s video is connected to this input make sure its audio is connected to an audio input that is on the AUX2 input channel 18 Component Video Y Pb Cb Pr Cr output Connects to a TV with Component Video Y Pb Cb Pr Cr inputs Con nect here using a set of Component Video cables This will play the video from a player that is connected to one of the Component Video input jacks Make sure that the correct input channel is selected 19 Subwoofer output Connects to a powered subwoofer with an RCA input NOTE Requires a powered subwoofer or a power amplifier 20 Center C speaker output Connect to the Center surround sound speaker using speaker cables with exposed wires or banana plugs 21 Front Left and Front Right speaker outputs Connect to the Front Left and Front Right speakers using speaker cables with exposed wires or banana plugs 22 Surround Left and Surround Right speaker outputs Connect to the Surround Left and Surrou
14. a player s video is connected to this input make sure its audio is connected to an audio input that is on the AUX2 input channel Descriptions and Functions Hear Panel 1NV dOO1 v ANTENNA p SPEAKERS OUTPUT AC 115V 60Hz SPEAKERS IMPEDANCE 4 18 OHMS RECOMMEND IMPEDANCE OHMS XVOD W4 MAX 1000W CTTTTTIT gaman avo J 12 AUX3 S Video input S Video input for the AUXS input channel Connect here using an S Video cable NOTE If a player s video is connected to this input make sure its audio is connected to an audio input that is on the AUXS input channel 13 TV S Video input S Video input for the TV input channel Connect here using an S Video cable NOTE If a player s video is connected to this input make sure its audio is connected to an audio input that is on the TV input channel 14 S Video output jack Connects to a TV with an S Video input Connect here using an S Video cable This will play the video from a player that is connected to one of the S Video input jacks Make sure that the correct input channel is se lected 15 DVD Component Video Y Pb Cb Pr Cr input Component Video input for the DVD input channel Connect to a TV with Component Video inputs using a set of Component Video cables NOTE If a player s video is connected to this input make sure its audio is connected to an audio input that is on the DVD input channel 16 AUX1 Component
15. control to speakers do not have a high ability for bass reproduction raise the level In this position low bass signals 100 Hz in the surround 2 Turn the Input Adjust knob on the front panel counter left and right channels are output from the subwoofer speaker or from the left and right main speaker if the clockwise or press the W button on the remote control to lower the level subwoofer setting is set to the N none position None Select this position if your system does not include FR VOL Front Right Channel level wie surround left and right speskers The surround left Use the Input Adjust knob on the front panel or the and and right channels will be output from the front left and gt buttons onthe remote control to sdiuek the devel right speakers instead i Level range 70dB to 10dB B Speaker Back Surround Speakers 1 Turn the Input Adjust knob on the front panel clock Use the Input Adjust knob on the front panel or the and wise or press the A button on the remote control to P buttons on the remote control to select the parameter raise the level T 2 Turn the Input Adjust knob on the front panel counter Choices 0 0 5 0 L O 3 5 and L L clockwise or press the W button on the remote control to lower the level 0 0 When there are no back speakers S O When there is only one small back speaker L O When there is only one large back speaker LB VOL Left Back Surround Channel level Use the Input Adjust k
16. correct input channel i e AUX1 for the AUX1 input channel DVD OPT1 for the DVD input channel etc DVG 888K rear panel DTX 9909K rear panel Connecting to a TV Video Monitor using the Com ponent Video Y Pb Cb Pr Cr Outputs What you will need TV video monitor with Component Video inputs Component video cable 1 Connect one end of each of the Component video cables to each of the Component Video Output jacks on the DTX 9909K rear panel 2 Connect the other ends of the Component video cables to the Component Video inputs on the TV Video monitor 3 Make sure the TV Video monitor is set to the correct video input Consult the TV Video monitor s user manual for the necessary instructions a S COMPONENT IN COMPONENT VIDEO IN DVD Y Ps Ca PR CR DTX 89909K rear panel Getting Connected cont Connecting a CD or Tape Player audio only Use the CD and TAPE inputs on the rear panel to connect audio only devices CD Mp3 tape players with RCA outputs Tape player 1NYdOO1 WY Selecting the correct input channel Front panel Press the INPUT button on the DTX 9909K front panel until the correct input channel is displayed on the screen Remote Control Press the corresponding input button on the remote control to access the correct input channel i e TAP
17. noise OUT 8Q No signal input short circuit input lt 15 SW input sensitivity Input 1OOHz signal distortion 196 7 1 Input lt 360 SW linear input Overload electromotive force Input frequency 100Hz 7 1 Input 23 5 SW linear Max output voltage Input 1OOHz signal distortion 196 7 1 Input Headphone max output Input 1KHz signal Output 32 load distortion 196 REC Max output without distortion Input 1KHz signal Output 10K load distortion 196 Video frequency test Input 6 5MHz 1Vpp Output 75Q load Output 900 950mVpp AM 26cB limit noise sensitivity Specification MIN 603KHz 999KHz 1404KHz Technical Specifications cont Signal to noise ratio 8096 mod 999KHz A weight Distortion rate 80 mod 999KHz Audio output L R output 999KHz intermediate frequency restrain ratio Audio frequency Ref characteristic 16 Frequency range 522 161 88 0MHz 15KHz LPF ON 98 0MHz 106 0MHz 50dB limit noise sensitivity 98 0MHz Signal noise ratio 15KHz LPF ON 98 0MHz 98 0MHz Distortion 15KHz LPF ON 98 0MHz 98 0MHz Audio output 15KHz LPF ON 98 0MHz Stereo separate ratio 15KHz LPF ON 98 0MHz 23 30 Frequency range 87 50 108 00 Ge
18. the maximum volume level for micro phone channel 2 NOTE If this is set too low the micro phone will not be loud enough Use the Input Adjust knob on the front panel or the and buttons on the remote control to adjust the maximum volume for microphone channel 2 Volume Range O 80 1 Turn the Input Adjust knob on the front panel clock wise or press the button on the remote control to raise the volume 2 Turn the Input Adjust knob on the front panel counter clockwise or press the W button on the remote control to lower the volume e MIC BASS Microphone bass tone level Use this setting to adjust the amount of bass tone that is present in the microphone channels 1 and 2 Use the Input Adjust knob on the front panel or the and buttons on the remote control to adjust the microphone bass tone level Bass Tone Range 10dB 10dB 1 Turn the Input Adjust knob on the front panel clock wise or press the A button on the remote control to increase the bass 2 Turn the Input Adjust knob on the front panel counter clockwise or press the W button on the remote control decrease the bass e MIC TREB Microphone Treble tone level Use this setting to adjust the amount of treble that is pres ent in the microphone channels 1 and 2 Use the Input Adjust knob on the front panel or the and buttons on the remote control to adjust the microphone treble level Treble Tone Range 10dB 10dB 1 Turn the Input Adju
19. to choose either Bass or Treble2 and use the button on the remote to decrease the Bass or Treble and the P to increase it 13 Arrow buttons Use the arrow buttons to adjust the various speaker settings Use the and V arrows to select which settings to adjust Use the and P buttons to change the parameters for each settings To open the Speaker Settings menu press either of the amp and V ar rows or press the MENU button 14 Menu button Accesses the Speaker Settings Menu Use the arrow buttons to make changes in the Speaker Settings Menu All of the information will appear on the display screen on the front panel 15 Test button Press this button to perform a channel test The channel test sends sound to each of the speak er outputs to test whether they are connected correctly The display screen will show which speaker is being tested at a given time so that you can make sure the connec tions are correct 16 Zone2 Button Toggles between input channel Zone 1 and input channel Zone 2 Zone 1 Analog and digital input channels DVD AUX1 AUX2 AUX3 TV AM FM Tuner 7 1 CH OPT1 OPT2 COAX1 COAX2 COAX3 TAPE and CD Zone 2 Analog input channels DVD AUX1 AUXe2 AUX3 TV AM FM Tuner TAPE and CD 17 Tape COX input button Toggles between the TAPE and COAX1 input channels When the DTX 9909K is set to Zone 2 this button will only access the TAPE input channel as the digital coaxial channels are not ava
20. 5 C52 C 2 Ce C C 8 MIC BASS MIC TREBLE TUNER AUTO AUX1 OPT2 TUNER AUTO button O O8 DTX 9909K NOTE Weak signals can affect the Automatic Preset Storing function Adjust the antenna for best reception and a more efficient search Manually Presetting Stations 1 2 Press the MEMORY button on the remote control Press the TUNER AUTO button on the remote control to select AM or FM Select a radio station using the SCAN or SCAN but tons on the remote control The MEMORY indicator on the display screen will begin blink ing Press the A B C D button on the remote control to cycle through the preset banks A to D and select one Press one of the preset station number buttons 1 8 on the remote control to select a preset station number Repeat steps 2 to 5 to store other stations Retrieving Preset Stations Press the TUNER AUTO button on the remote control to select AM or FM Press the A B C D button on the remote control to select your desired preset bank Press one of the preset station number buttons 1 8 on the remote control to select your desired preset sta tion number opeaker Settings Menu Speaker Settings Menu In order to adjust the speaker settings the DIX 9909K must be in Music Mode The DTX 899O09K is in Music Mode whenever there are no microphone cables connected to either of the microphon
21. 9K s display screen Use the Input Adjust knob on the front panel or the lt and P buttons on the remote control to adjust the param eters for each setting Available Karaoke Mode Settings e EFF VOLUME Microphone DSP effect volume This setting determines how much DSP effect is present in the microphone signal Use the Input Adjust knob on the front panel or the and buttons on the remote control to adjust the volume for the DSP microphone effect Volume Range O 80 1 Turn the Input Adjust knob on the front panel clock wise or press the button on the remote control to raise the volume 2 Turn the Input Adjust knob on the front panel counter clockwise or press the W button on the remote control to lower the volume Karaoke Mode cont e MIC1 VOL Microphone channel 1 volume Use this setting to set the maximum volume level for micro phone channel 1 NOTE If this is set too low the micro phone will not be loud enough Use the Input Adjust knob on the front panel or the and buttons on the remote control to adjust the maximum volume for microphone channel 1 Volume Range O 80 1 Turn the Input Adjust knob on the front panel clock wise or press the button on the remote control to raise the volume 2 Turn the Input Adjust knob on the front panel counter clockwise or press the W button on the remote control to lower the volume e MIC2 VOL Microphone channel 2 volume Use this setting to set
22. E COX button for the TAPE input channel or the CD COX2 button for the CD input channel Getting Connected cont Digital Audio Options The DTX 8909K allows you to utilize the premium sound experience that digital audio offers by providing five digital au dio inputs A digital connection allows for an entirely digital signal to be sent to and decoded by the DTX 89909K This eliminates the need for an analog signal or conversion and the subsequent loss in fidelity and quality Take advantage of the DTS or Dolby Digital capabilities of many DVDs and CDs by using either of the two types of inputs found here and give your home theater or KJ set up the digital edge DIGITAL OPTICAL This input also known as TOSLINK provides a digital connection through the use of a single pin fiber optic cable DIGITAL COAXIAL This input provides a digital connection through the use of an RCA style coaxial cable Note that both types of inputs are nearly identical in signal quality they are both available on the DTX 9909K to allow flexibility with your existing equipment DIGITAL OPTICAL may provide a stronger signal over a long distance connection but this is usually not a concern in most home theater and KJ set ups Connecting a Player with Digital Optical Audio Out puts There are 2 Digital Optical audio inputs on the DTX 9909K rear panel OPT1 and OPT2 What you will need Player with a Digital Optical output Digital Optical cable
23. Guard against this by setting your equipment at a safe level BEFORE your hearing adapts To establish a safe level Start your volume control at a low setting Slowly increase the sound until you can hear it comfortably and clearly and without distortion Once you have established a comfortable sound level Set the dial and leave it there Pay attention to the different levels in various recordings Taking a minute to do this now will help to prevent hearing damage or loss in the future After all we want you listening for a lifetime Used wisely your new sound equipment will provide a lifetime of fun and enjoyment Since hearing damage from loud noise is often undetectable until it is too late this manufacturer and the Electronic Industries Association s Consumer Electronics Group recommend you avoid prolonged exposure to excessive noise This list of sound levels is included for your protection Some common decibel ranges Level Example 30 Quiet library Soft whispers 40 Living room Refrigerator Bedroom away from traffic 50 Light traffic Normal Conversation 60 Air Conditioner at 20 ft Sewing machine 70 Vacuum cleaner Hair dryer Noisy Restaurant 80 Average city traffic Garbage disposals Alarm clock at 2 ft The following noises can be dangerous under constant exposure Level Example 90 Subway Motorcycle Truck traffic Lawn Mower 100 Garbage truck Chainsaw Pneumatics drill 120 Rock band concert in front of
24. IBA ABI 7 7 TM THE SINGER S ULTIMATE CHOICE DTX 9909K INPUT MAIN MENU UR DIGITAL DSP 2 7 STEREO TEST ZONE POWER HEADPHONE DIT MIC 1 MIC 2 e OQ e e m DTX 9909K OOW MAX 7 1 Surround Sound Receiver with Professional Karaoke DSP Processing Table of Contents FCC Information Listening for a Lifetime Safety Instructions Features Technical Specs Getting Started Getting Connected Speakers Microphones Headphones Descriptions and Functions Front Panel Rear Panel Remote Control LED Display Basic Functions AM FM Tuner Operations Speaker Settings Menu Karaoke Mode Reference Surround Sound Setup Playback Modes Listening Modes FCC INFORMATION U S A 1 IMPORTANT NOTICE DO NOT MODIFY THIS UNIT This product when installed as indicated in the instructions contained in this manual meets FCC requirements Modifications not expressly approved by Vocopro may void your authority granted by the FCC to use this product 2 IMPORTANT When connecting this product to accessories and or another product use only high quality shielded cables Cable s supplied with this product MUST be used Follow all installation instructions Failure to follow instructions could void your FCC authorization to use this product in the U S A 3 NOTE This product has been tested and found to comply with the requirements listed in FCC Regulations Part 15 fo
25. Music Mode whenever a microphone is NOT connected to either of the microphone Input button Press this button to cycle through the available input channels Adjusting the Music Volume Adjust the master music volume using the VOLUME control on the front panel Turn the VOLUME control clockwise to raise the volume and counter clockwise to lower the volume DTX 9909K Adjusting the Master Microphone Volume When there is one or more microphones connected to the microphone input s on the front panel adjust the master microphone volume using the INPUT ADJUST control on the front panel Turn the control clockwise to raise the volume and counter clockwise to lower the volume NOTE At least one microphone must be con nected to a microphone input for INPUT ADJUST control to adjust the microphone volume AM FM Tuner Operations The DTX 8909K has a built in AM and FM tuner that allows you to listen to your favorite radio stations Connecting the Antennas The antennas must be connected in order to receive clear reception Indoor FM Antenna 1 Connect the FM loop antenna with the coaxial end to the FM COAX jack on the rear panel 2 If necessary hang the other end of the antenna so that it is up higher and out of the way of any hindrance Indoor FM antenna included ANV dOO WY Oe oe ANTENNA AM Loop Antenna 1 Uncoil the antenna wire 2 Press down on the antenna ta
26. OTE If a player s audio is connected to this input make sure its video is connected to a video input RCA or S Video that is on the TV input channel 32 Record Out L R RCA jacks Connect to a recording device powered speakers or any device with RCA L R inputs Descriptions and Functions Hear Panel ELEH a eA a banana a a aa m m DE T T mm uo TT SEE MANUAL TO SWITCH VOLTAGE e 33 DVD 7 1 Channel Surround Sound input jacks Connect a player with 5 1 or 7 1 digital surround sound audio outputs here 34 ZONE Pre Out L R RCA jacks Connect to a second mixer or receiver to output ZONE2 This output will play which ever input channel ZONE is set to play The ZONE 2 channel allows you to output any of the analog input channels to a different location to be played simultaneously with the main zone This is common for home entertainment setups that have different things playing in different rooms at the same time NOTE Zone 2 does not include any of the digital input channels optical coaxial 7 1 surround sound 35 OPT1 Digital Optical Audio input Digital optical audio input for the OPT1 DVD input channel Connect here using a digital optical cable When using a player that is connected to these inputs make sure the DTX 8909K is set to the OPT1 input channel NOTE If a player s audio is connected to this input make sure its video is connected to a video input RCA S Video or Component th
27. Surround EX Decoder DSP Vocal Reverb e DSP Feedback Reducer e 7 Input Channels 5 audio video 2 audio only e Treble and Bass Tone Controls Digital AM FM Tuner with 64 Station Presets e Full function Remote Control e Automatic Audio Format Recognition e Remote Control Standby e Sleep Timer Headphone Jack and Speaker Bypass Dolby Digital Decoder e DTS Decoder e 7 Channel Stereo Mode e 2 Channel Stereo Bypass Mode e 7 DSP modes Church Disco Hall Jazz Live Stadium and Theater Connections Contents Audio Inputs e 1 Power cable e 7 Stereo L R RCA e 1 Remote control e 3 Digital Coaxial e 2 AA battery 2 Digital Optical e 1 Indoor FM antenna e 1 AM loop antenna Video Inputs e 1 Warranty card e 5 RCA Video e 5 S Video e 3 Component Video YPbPr Audio Outputs e L R RCA Pre e L R RCA Record e RCA Subwoofer Speaker Outputs e L R Banana Plug Front Speaker e Center Banana Plug Speaker e L R Banana Plug Surround e L R Banana Plug Surround Back Video Outputs e 1 RCA Video e 1 S Video e 1 Component YPbPr Radio Tuner e FM Antenna Output e AM Antenna Output Warranty Card Technical Specifications Test item Test condition Technology requirement Input Sensitivity Input 1KHz signal output 8Q load distortion 1 L R C SL SR SBL SBR 200 Overload electromotive force Input 1KHz signal output 8Q load
28. X 9909K rear panel Getting Connected cont Connecting a Player with Digital Coaxial Audio Out DVG 888K rear panel puts There are 3 Digital Coaxial audio inputs on the DTX 9909K rear panel COAX1 COAX2 and COAX3 What you will need Player with a Digital Coaxial output Digital Coaxial cable Connect one end of the Coaxial cable to the Coaxial audio output on the player AN Gonnect the other end of the Coaxial cable to either of the Coaxial inputs on the DTX 9909K rear panel Select the proper input channel on the DTX 8909K Select the DVD input channel for COAX1 the AUX1 input channel for COAX2 and the AUX2 input channel for COAX3 NOTE Make sure the player s video is also con nected to the correct input channel SN G N DTX 9909K rear panel Matching up the Correct Video Input COAX1 DVD When connecting a player s audio to the COAX1 input make sure that player s video is connected to one of the video inputs on the DVD input channel COAX2 AUX1 When connecting a player s audio to the COAX2 input make sure that player s video is connected to one of the video inputs on the AUX input channel COAX3 AUX2 When connecting a player s audio to the COAXS input make sure that player s video is connected to one of the video inputs on the AUX2 input channel Selecting the correct input channel Front panel Press the INPUT button o
29. andard Normal Signal Compression Minimum Minimum Signal Compression Karaoke Mode The DTX 89089K will be in Karaoke Mode whenever there is at least one microphone connected to the microphone inputs Turning Karaoke Mode On 1 Insert a microphone cable into one of the microphone inputs on the front panel 2 The display screen will say KARAOKE ON indicating that Karaoke Mode is on Turning Karaoke Mode Off 1 Unplug all of the microphone cables to turn Karaoke Mode off 2 The display screen will say KARAOKE OFF indicating that Karaoke Mode is off Karaoke Mode Settings Menu The Karaoke Mode Settings Menu allows you adjust the fol lowing settings Microphone DSP Effect Volume Microphone 1 amp 2 Volume limits Microphone Bass tone level Microphone Treble tone level Microphone Delay time Microphone Repeat level Microphone Reverb Time Microphone Reverb Level Microphone Feedback Time e OK Feedback Reducer setting Accessing the Karaoke Mode Settings Menu 1 Press the Main Menu button on the front panel or the Menu button on the remote control while the DTX 9909K is in Karaoke Mode 2 The settings will appear on the DTX 8909K s display screen Navigating through the Karaoke Mode Settings Menu 1 Press the Main Menu button on the front panel or the amp and V buttons on the remote control to cycle through the available Karaoke Mode Settings The settings will appear on the DTX 890
30. andby On and Off 34 Subwoofer 43 Subwoofer output jack 27 Surround Back Left and Surround Back Right speaker outputs 27 Surround Back Speakers SBR and SBL 43 SURROUND BACK speaker terminals 13 Surround Speakers SR and SL 43 SW Speaker 38 SW VOL 39 SW VOL Subwoofer volume 38 S DELAY 39 S Speaker 38 T Tape COX1 input button 31 TAPE L R Stereo RCA inputs 28 TEST F B EX button 24 Test button 31 TREBLE 39 TUNER AUTO 31 Turning Karaoke Mode Off 40 Turning Karaoke Mode On 40 TV input channel button 31 TV L R Stereo RCA inputs 28 TV RCA video input 26 TV S Video input 27 Z Zone2 Button 31 Zone2 button 24 ZONE2 PRE 14 ZONE2 Pre Out 29 Zone 2 Menu 31 NOTES 50 IBA ABI 7 7 TM THE SINGER S ULTIMATE CHOICE DTX 9909K owner s manual VocoPro 2008 v1 0 Wwww vocopro com
31. annot be tuned in with automatic tuning Cause e The connected component is not set to output Dolby Digital or DTS digital signals e The incorrect input channel has been selected e Cable s not connected correctly e t is not possible to record the sound effect with a recording device e The recording device is not connected to the PRE OUT REC jack e The internal microcomputer has been frozen by an external electric shock such as lightening or excessive static electricity or by a power supply with low voltage e The DTX 9909K is too close to the digital or high frequency equipment The video source uses scrambled or encoded signals to prevent dubbing The video signal is not connected to the correct source The video cable is bad The internal temperature is too high and the overheat protection cicuitry has been activated FM stereo broadcasts may cause this problem when the transmitter is too far away or the antenna input is poor There is multipath interference The signal is too weak Remedy e Set your player to the correct setting following it s operating instructions e Select the correct input channel using the input select buttons e Firmly connect all audio cables If the problem persists the cable s may be defective e Connect the recording device to the PRE OUT REC jack e Disconnect the AV power cord from the outlet and then plug it in after ap proximately 30 seconds
32. at is on the DVD input channel 36 OPT2 Digital Optical Audio input Digital optical audio input for the OPT2 AUX71 input channel Connect here using a digital optical cable When using a player that is connected to these inputs make sure the DTX 8909K is set to the OPT2 input channel NOTE If a player s audio is connected to this input make sure its video is connected to a video input RCA S Video or Component that is on the AUX1 input channel 37 COAX1 Digital Coaxial Audio input Digital Coaxial audio input for the COX1 DVD input channel Connect here using a digital coaxial cable When using a player that is connected to these inputs make sure the DTX 9909K is set to the COX1 input channel NOTE If a player s audio is connected to this input make sure its video is connected to a video input RCA S Video or Component that is on the DVD input channel 38 COAX2 Digital Coaxial Audio input Digital Coaxial audio input for the COX2 AUX1 input channel Connect here using a digital coaxial cable When using a player that is connected to these inputs make sure the DTX 9909K is set to the COX2 input channel NOTE If a player s audio is connected to this input make sure its video is connected to a video input RCA S Video or Component that is on the AUX1 input channel 39 COAXS Digital Coaxial Audio input Digital Coaxial audio input for the COX3 AUX2 input channel Connect here using a digital coaxial cable When using a p
33. ations again Tighten the AM loop antenna connec tion and reposition it for better recep tion Use the manual tuning method e Use an outdoor antenna and a ground wire e Move the DTX 8909K away from the TV The remote control will function within a maximum range of 2O 6m and at no more than a 30 angle from the DTX 8908K s front panel e Reposition the DTX 9909K e Replace all of the batteries e Install the batteries into the remote control Be sure to match the and ends of each battery to the symbols shown in the remote control s battery compartment Resetting the DIX 9909K Resetting the Factory Presets To reset all of the DTX S9O09K s parameters to the original factory settings follow the instructions below This procedure completely resets ALL parameters and settings NIH ABI T F DTX 9909K Digital Surround Sound Receiver with Professional Karaoke Processor INPUT MAIN MENU pe DIGITAL SP 2 7 STEREO TEST ZONE DTS Nes 6 PROLOGI Ix MENU CHANNEL OJ POWER HEADPHONE MODE MIC 1 MIC 2 e E 2276 Dnpssv pew PTAS AJ 1 Be sure the power is OFF 2 Press and hold the INPUT button on the front panel then press the POWER button on the front panel 3 Hold down the INPUT button until HESET appears on the display screen 2 5 Stereo 24 2 7 Stereo 24 2 7 Stereo 2 5 Stereo button 24 2 7 Stereo button 32 7 1 input
34. b to open the terminal 3 Insert the exposed wires 4 For best reception rotate the antenna horizontally Operating the Auto Tuner 1 Press the TUNER AUTO button on the remote control or INPUT button on the front panel to select TUNER as the input source 2 Press the TUNER AUTO button on the remote control to select AM or FM There are two ways to tune automatic and manual Auto matic tuning is effective when station signals are strong and there is no interference If the signal from the station that you want to select is weak you must tune it manually Manual Tuning 1 Press the SCAN or SCAN buttons on the remote con trol to find your desired station 2 You can also press and hold the SCAN or SCAN but tons for about one second to use the automatic search function Automatic search will automatically scan up or down until it finds a clear station AM FM Tuner Operations cont Preset Stations Automatic Preset Storing Make sure TUNER is selected as the input source Press the TUNER AUTO button on the remote control to select AM or FM Press and hold the TUNER AUTO button on the remote control for 3 seconds to begin automatic tuning Radio frequencies will be scanned and stations stored automatically as A1 Ae A3 A4 Ab etc When all avail able radio stations are stored or if all 32 memory loca tions are full the auto preset will stop GOD YD CIGD C4
35. button on the remote control to raise the level 2 Turn the Input Adjust knob on the front panel counter clockwise or press the W button on the remote control to lower the level Speaker Tone Settings e TREBLE Use the Input Adjust knob on the front panel or the and buttons on the remote control to adjust the tone Tone range 10dB to 70dB 1 Turn the Input Adjust knob on the front panel clock wise or press the A button on the remote control to raise the treble 2 Turn the Input Adjust knob on the front panel counter clockwise or press the W button on the remote control to lower the treble e BASS Use the Input Adjust knob on the front panel or the and P buttons on the remote control to adjust the tone Tone range 10dB to 70dB 1 Turn the Input Adjust knob on the front panel clock wise or press the A button on the remote control to raise the bass 2 Turn the Input Adjust knob on the front panel counter clockwise or press the W button on the remote control to lower the bass C DELAY Center delay It may be necessary to adjust the delay for the center chan nel to make up for the distance between the speakers Use the Input Adjust knob on the front panel or the and P buttons on the remote control to adjust the delay time Delay range O ms 5 ms 1 Turn the Input Adjust knob on the front panel clock wise or press the button on the remote control to increase the delay time 2 Turn the Input
36. channel button 31 80 amp 40 Impedence Selector switch 29 A A B C D 32 Accessing the Speaker Settings Menu 37 AC input 27 Adjusting the Master Microphone Vol ume 34 Adjusting the Music Volume 34 AM FM Tuner preset buttons 32 AM Loop Antenna 35 AM Loop Antenna input 26 Antennas 35 Automatic Preset Storing 36 AUXA OPT2 input channel button 31 AUX1 Component Video Y Pb Cb Pr Cr input 27 AUX1 L R Stereo RCA inputs 28 AUX1 RCA video input 26 AUX1 S Video input 26 AUX2 COX3 input channel button 31 AUX2 Component Video Y Pb Cb Pr Cr input 27 AUX2 L R Stereo RCA inputs 28 AUX2 RCA video input 26 AUX2 S Video input 26 AUX input channel button 31 AUX3 L R Stereo RCA inputs 28 AUX3 RCA video input 26 AUX3 S Video input 27 Available Input channels 34 Available listening modes 44 B BASS 39 Battery Replacement 11 B DELAY 39 B Speaker 38 C CD COX2 input channel button 31 CD L R Stereo RCA inputs 28 Center C speaker output 27 Center Speaker C 43 CENTER speaker terminals 13 COAX1 Digital Coaxial Audio input 29 COAXe Digital Coaxial Audio input 29 COAX3 Digital Coaxial Audio input 29 Component Video Y Pb Cb Pr Cr 18 Component Video Y Pb Cb Pr Cr output jack 27 Connecting a DVD Player 15 Connecting Speakers 12 Connecting the Antennas 35 Connecting to a TV Video Monitor 17 Connecting to a TV Video Monitor us ing the S Video Output 17 C DELAY 39 C Speaker 37
37. crophones are connected it will be in Music Mode 2 7 Stereo MIC CHANNEL When a L R stereo device is connected to the DTX 8909K you can set it to send the audio to just the right and left speakers 2 channel or to the surround sound speaker outputs 7 channel 5 channel In Music Mode this button switches between 2 channel stereo mode and 7 channel stereo mode In Karaoke Mode this button switches between 2 channel stereo mode and the available 5 channel output configurations L R C left right Center SL SH L R C side left side right left right Center SL SR C side left side right center L R left right and C center NOTE when using either the 7 channel or Mic Channel modes you must have speakers connected to the red amp black surround speaker outputs on the rear panel About Karaoke Mode and Music Mode The DTX 8909K automatically enters Karaoke Mode when a microphone is connected to either of the microphone inputs on the front panel When no microphones are connected it will be in Music Mode TEST F B EX button In Music Mode press this button to perform a channel test The channel test sends sound to each of the speaker outputs to test whether they are connected correctly The display screen will show which speaker is being tested at a given time so that you can make sure the connections are correct In Karaoke Mode use this button to cycle through the 3 levels of DSP feedback eliminator or to turn it
38. d to the wall outlet even if the apparatus itself is turned off To fully insure that the apparatus is indeed fully void if residual power leave unit disconnected from the AC outlet for at least fifteen seconds CAUTION READ THIS BEFORE OPERATING YOUR UNIT 1 To ensure the finest performance please read this manual carefully Keep it in a safe place for future reference 2 Install your unit in a cool dry clean place away from windows heat sources and too much vibration dust moisture or cold Avoid sources of hum transformers v motors To prevent fire or electrical shock do not expose to rain and water 3 Do not operate the unit upside down 4 Never open the cabinet If a foreign object drops into the Set contact your dealer 5 Place the unit in a location with adequate air circulation Do not interfere with its proper ventilation this will cause the internal temperature to rise and may result in a failure 6 Do not use force on switches knobs or cords When moving the unit first turn the unit off Then gently disconnect the power plug and the cords connecting to other equipment Never pull the cord itself 7 Do not attempt to clean the unit with chemical solvents this might damage the finish Use a clean dry cloth 8 Be sure to read the Troubleshooting section on common operating errors before concluding that your unit is faulty 9 This unit consumes a fair amount of power even when the power swi
39. e inputs Below is a list of the available speakers settings and their available options Accessing the Speaker Settings Menu To access the speaker settings press the Main Menu but ton on the front panel or the Menu button on the remote control Using the Speaker Settings Menu Front Panel 1 Press the Main Menu button on the front panel to cycle through all of the speaker settings 2 Use the Input Adjust control to change the parameters for each setting INPUT ADJUST POWER HEADPHONE amp Remote Control Press the Menu button on the remote control to access the Speaker Settings menu Use the and V buttons to cycle through all of the speaker settings Use the and P buttons to change the parameters for each setting Available Speaker Settings Below is a list of the speaker settings available in the Speaker Settings Menu M Speaker Main Speakers zs Use the Input Adjust knob on the front panel or the and buttons on the remote control to select the parameter Choices Large Small Large If your main speakers have a high ability for bass reproduction In this position full range signals present in the main channels are output from the main speakers Small If your main speakers do not have a high ability for bass reproduction However if your system does not include a subwoofer do not select this position In this position low bass signals are output from the subwoofer outpu
40. e on Zone 2 Descriptions and Functions Hemote Control n MN ve DTS 2 7 TEREC as DTX 9909K 26 DTS DTX ES button Use this button to select the correct DTS or DTX ES setting Select DTS when playing 8 disc that is formatted with DTS 5 1 surround sound or DTS ES when using a disc that is formatted with DTS ES 6 1 surround sound NOTE In order to get true 5 1 or 6 1 surround sound the disc must be formatted with 5 1 or 6 1 surround sound audio Check your disc s packaging if you are not sure whether it is for matted for 5 1 or 6 1 surround sound 27 2 7 Stereo button When a L H stereo device is con nected to the DTX 9909K you can set it to send the au dio to just the right and left speakers 2 channel or to the surround sound speaker outputs 7 channel 5 channel In Music Mode this button switches between 2 channel stereo mode and 7 channel stereo mode In Karaoke Mode this button switches between 2 channel stereo mode and the available 5 channel output configurations L R C left right Center SL SR L R C side eft side right left right Center SL SH C side left side right center L R left right and C center 28 Dolby Digital Dolby EX button Toggle between Dolby Digital and Dolby Digital Surround EX mode Dolby Digital for 5 1 channel surround sound with DVDs that are labeled with the Dolby Digital logo papos Dolby Digital Surround EX For 6 1 channel surround
41. eo out put on your player 2 Connect the other end of the S Video Cable to one of the S Video inputs on the DTX 99Q09K s rear panel 3 Select the proper input channel on the DTX 9909K NOTE All 5 of the A V input channels have an S Video input so make sure the correct one is selected Selecting the correct input channel Front panel Press the INPUT button on the DTX 9909K front panel until the correct input channel is displayed on the screen Remote Control Press the corresponding input button on the remote control to access the correct input channel i e AUX1 for the AUX1 input channel DVD OPT1 for the DVD input channel etc DVX 880 PRO rear panel FE i Price FL CENTER st NO I SE SCART OUTPUT DDDODD000 VALCO TT LA VERNE CALIFORNIA 1NY 4001 WY xvoo WI 7 1CH IN DTX 9909K rear panel Connecting to a TV Video Monitor using the S Video Output What you will need TV video monitor with an S Video video input e S Video video cable 1 Connect one end of the S Video video cable to the S Video OUT jack on the DTX 8809K rear panel 2 Connect the other end of the S Video video cable to the S Video video input on the TV Video monitor 3 Make sure the TV Video monitor is set to the correct video input Consult the TV Video monitor s user manual for the necessary instruc
42. ereo RCA inputs for the AUX1 input channel Connect here using stereo RCA audio red amp white cables When using a player that is connected to these inputs make sure the DTX 9909K is set to the AUX71 input channel NOTE If a player s audio is connected to this input make sure its video is connected to a video input RCA S Video or Component that is on the AUX1 input channel 29 AUX2 L R Stereo RCA inputs Stereo RCA inputs for the AUX2 input channel Connect here using stereo RCA audio red amp white cables When using a player that is connected to these inputs make sure the DTX 9909K is set to the AUX input channel NOTE If a player s audio is connected to this input make sure its video is connected to a video input RCA S Video or Component that is on the AUX input channel 30 AUX3 L R Stereo RCA inputs Stereo RCA inputs for the AUXS input channel Connect here using stereo RCA audio red amp white cables When using a player that is connected to these inputs make sure the DTX 9909K is set to the AUXGS input channel NOTE If a player s audio is connected to this input make sure its video is connected to a video input RCA or S Video that is on the AUX3 input channel 31 TV L R Stereo RCA inputs Stereo RCA inputs for the TV input channel Connect here using stereo RCA audio red amp white cables When using a player that is connected to these inputs make sure the DTX 9909K is set to the TV input channel N
43. he same distance between each other as is between the front speakers or no less than 11 8 30 cm Subwoofer A subwoofer is great for not only reinforcing bass frequen cies from any or all channels but also for high fidelity repro duction of the LFE low frequency effect channel included in Dolby Digital and DTS software It is best to position the subwoofer near the front speakers and turn it slightly to wards the center of the room to reduce wall reflections Di Pole Speaker Layout Either Di pole or direct radiating speaker types can be used for THX surround sound If you choose di pole speakers please place the surround and surround back speakers ac cording to the speaker layout below e Di pole speaker 1 Direction of the di pole speaker phase Heference cont Playback Mode Display Abbrevations and Full Working Names ones raveraa 1 neo 6 MUS ve 6Musc s puo easvoemu s PRO ik MUSIC poBY PROLOGIC I MUSIC s PRO tk MOVE DOLBY PROLOGIC Ix MOVE Listening Modes Depending in the type of disc you are using certain listening modes will be available Below is a complete list of the DTX 9909K s listening modes NOTE Not all listening modes will be available for every type of disc e BYPASS 2 CH STEREO e 7 CH STEREO e DOLBY DIGITAL e DOLBY DIGITAL EX e DOLBY PROLOGIC Il MOVIE e DOLBY PROLOGIC MUSIC e DTS e DTS ES e DTS 96 24 Neo 6 CINEMA Neo 6 MUSIC Available
44. he user with three video output and input options that can be utilized to optimize your home theater system or KJ set up lt is recommended to use the best available connection to maximize your video output Composite Yellow RCA This type of connection is the most common type Outputs are found on all DVD players camcorders and other video output devices inputs can be found on most TVs and video monitors This connection requires an RCA style video cable not included S Video This is the four pin seperate video connection and provides a higher quality video signal than composite Outputs can be found on most DVD players camcorders and other video output devices inputs can be found on many TVs and video monitors This connection requires an S Video cable not included Component Y PbPr This type of connection provides the highest quality video signal of those found on the DTX 8909K Outputs can be found on many DVD players DVRs and other video output devices inputs can be found on High Definition TVs as well as many modern Standard Definition TVs This connection requires a component video cable not included NOTE The DTX 8809K will only output the type of video signal received from the corresponding input it does not convert a lesser signal to a greater signal lt is recommend ed you use the same type of video output connection used on the input It is suggested that you refer to the operating instructions of
45. hone volume controls Use these controls to adjust each microphone channel s individual volume Turn the control clockwise to raise the microphone s volume and counter clockwise to lower it 16 Microphone input jacks 4 Connect a microphone to each of these jacks using V4 microphone cables NOTE When a microphone is connected to one of these jacks the DTX 9909K will enter Karaoke Mode Descriptions and Functions Hear Panel 1NV dOO1 v ANTENNA p SPEAKERS OUTPUT AC 115V 60Hz SPEAKERS IMPEDANCE 4 18 OHMS RECOMMEND IMPEDANCE OHMS XVOD W4 MAX 1000W sae eee ee ee avo J AM Loop Antenna input Connect the AM radio tuner antenna here FM Coax antenna input Connect the FM radio tuner antenna here DVD RCA video input RCA video input for the DVD input channel Connect here using an RCA video yellow cable NOTE If a player s video is connected to this input make sure its audio is connected to an audio input that is on the DVD input channel AUX1 RCA video input RCA video input for the AUX1 input channel Connect here using an RCA video yellow cable NOTE If a player s video is connected to this input make sure its audio is connected to an audio input that is on the AUX1 input channel AUK2 RCA video input RCA video input for the AUX2 input channel Connect here using an RCA video yellow cable NOTE If a player s video is connected to this
46. ilable on Zone 2 18 7 1 input channel button Selects the 7 1 surround sound input channel When the DTX 8808K is set to Zone 2 the 7 1 surround sound input channel will not be available 19 TV input channel button Selects the TV input channel 20 CD COX input channel button Toggles between the CD and COAX2 input channels When the DTX 9909K is set to Zone 2 this button will only access the CD input channel as the digital coaxial channels are not available on Zone 2 21 AUX3 input channel button Selects the AUXS input channel 22 DVD OPT1 input channel button Toggles between the DVD and OPT1 input channels When the DTX 9909K is set to Zone 2 this button will only access the DVD input channel as the digital optical channels are not available on Zone 2 23 AUX2 COX3 input channel button Toggles between the AUX2 and COAXS input channels When the DTX 9909K is set to Zone 2 this button will only access the TAPE input channel as the digital coaxial channels are not available on Zone 2 24 TUNER AUTO Selects the AM FM tuner channel and toggles between AM and FM Hold this button down for 1 second to begin Auto Tuning The stations for each band AM and FM must be tuned before using 25 AUX1 OPTe2 input channel button Toggles between the AUX1 and OPT1 input channels When the DTX 9909K is set to Zone 2 this button will only access the AUX71 input channel as the digital optical channels are not availabl
47. input make sure its audio is connected to an audio input that is on the AUX2 input channel AUXS RCA video input RCA video input for the AUXS input channel Connect here using an RCA video yellow cable NOTE If a player s video is connected to this input make sure its audio is connected to an audio input that is on the AUXS input channel TV RCA video input RCA video input for the TV input channel Connect here using an RCA video yellow cable NOTE If a player s video is connected to this input make sure its audio is connected to an audio input that is on the TV input channel RCA Video output jack Connects to a TV with an RCA video input Connect here using an RCA video yellow cable This will play the video from a player that is connected to one of the RCA video input jacks Make sure that the correct input channel is selected DVD S Video input S Video input for the DVD input channel Connect here using an S Video cable NOTE If a player s video is connected to this input make sure its audio is connected to an audio input that is on the DVD input channel 10 AUX1 S Video input S Video input for the AUX1 input channel Connect here using an S Video cable NOTE If a player s video is connected to this input make sure its audio is connected to an audio input that is on the AUX1 input channel 11 AUX2 S Video input S Video input for the AUX2 input channel Connect here using an S Video cable NOTE If
48. layer that is connected to these inputs make sure the DTX 9909K is set to the COXS input channel NOTE If a player s audio is connected to this input make sure its video is connected to a video input RCA S Video or Component that is on the AUX2 input channel 40 80 amp 40 Impedance Selector switch Switches between 80 amp 4Q output Descriptions and Functions Hemote Control Standby button When the receiver s main power is on use this button to turn Standby Mode on and off Standby mode is similar to turning the machine off but in Standby mode the DTX 9909K consumes a small amount of power in order to receive infrared signals from the remote control Sleep button Accesses the sleep timer The sleep timer can be set to automatically turn the DTX 9909K off Press this button to cycle through the available sleep times 10 20 30 40 50 60 70 80 90 100 110 and 120 minutes To turn the Sleep Timer off press the Sleep button until SLEEP OFF appears on the display screen Mute button Turns Mute on and off When Mute is turned on there will be no music or microphone sound Digital Key Control Adjusts the musical key of music to fit the singer s vocal range b Lowers the musical key h Resets the music to the original or natural key Raises the musical key NOTE Digital Key Control changes the key of mu sic but will not affect the microphone vocals Micr
49. le Exposed Speaker Wire 1 Remove approximately 3 8 10mm of insulation wm 2 Twist the exposed wires together to prevent short circuits 3 Loosen the knob on the speaker terminal 4 Insert the bare wire 5 Tighten the knob until the wire is secure Getting Connected cont Determining the proper way to connect the speaker cables The speaker cable is a pair of insulated cables running side by side One cable is colored or shaped differently perhaps with a stripe groove or ridges 1 Connect one end of the striped grooved ridged etc cable to the red terminal on the rear panel of the DTX 9909K Connect the other end of the striped grooved ridged etc cable to the red terminal on the speaker Connect one end of the plain NO stripes grooves ridges etc cable to the black terminal on the rear panel of the DTX 8909K Connect the other end of the plain NO stripes grooves ridges etc cable to the black terminal on the speaker i 6 speaker wires DTX 8909K connectors Connecting to the FRONT speaker terminals Connect a pair of front positioned speakers to the and FRONT terminals on the rear panel of DTX 9909K following steps 1 5 on page 12 DTX 9909K rear panel Connecting to the CENTER speaker terminals Connect a center positioned speaker to the and CENTER terminals on
50. listening modes Below are lists of the available listening modes for certain discs When playing PCM encoded music CDs or analog signals including the AM FM tuner e BYPASS 2 CH STEREO e 7 CH STEREO e DOLBY PROLOGIC MOVIE e DOLBY PROLOGIC MUSIC Neo 6 CINEMA Neo 6 MUSIC When playing DOLBY DIGITAL or DOLBY DIGITAL SUR ROUND EX encoded DVD CDs e DOLBY STEREO 2 CH STEREO e 7 GH STEREO DOLBY DIGITAL DOLBY DIGITAL EX When playing DTS or DTS ES encoded DVD CDs e DTS STEREO 2 CH STEREO e 7 CH STEREO e DTS e DTS ES e DTS 96 24 When playing DTS 96KHz 24bit encoded DVD CDs NOTE The DTX 9909K will automatically switch to DTS 96 24 listening mode e DTS STEREO 2 CH STEREO e 7 GH STEREO e DTS 96 24 Troubleshooting Problem Dolby Digital or DTS sources cannot be played Dolby Digital or DTS indicator on the front panel display does not light up A humming sound can be heard The sound effect cannot be recorded A source cannot be recorded by a recording device This unit does not operate properly There is noise interference from digital or high frequency equipment or this unit The picture is disturbed There is no picture on the TV video monitor The power suddenly turned off and there is no sound or display FM stereo reception is noisy There is distortion and a clear recep tion cannot be found even with a high quality FM antenna The desired station c
51. n the DTX 9909K front panel until the correct input channel is displayed on the screen Remote Control Press the corresponding input button on the remote control to access the correct input channel i e TAPE COX1 button for the COAX1 input channel the CD COX2 button for the COAX2 input channel and the AUX2 COX3 button for the COAXS input Getting Connected cont Connecting Microphones You can connect up to 2 microphones to the DTX 8808K using Ya microphone cables What you will need e 2 microphones e 2 V4 microphone cables Connect the 1 4 end of the microphone cable to one of the microphone inputs MIC 1 or MIC 2 on the front panel Adjusting the Microphone Volume Use the microphone volume controls on the front panel to adjust the volume for each microphone channel 1 Turn the control clockwise to raise the microphone volume 2 Turn the control counter clockwise to lower the microphone volume VOLUME AW O mmm Connecting Headphones You can connect headphones to the DTX 9909K using headphones with a 1 4 jack Connect the 1 4 headphone cable to the headphone input jack on the DTX 8809K front panel Headphone Notes Do not play the headset at a high volume Hearing experts advise against continuous extended play f you experience a ringing in your ears reduce volume or discontinue use Always turn down the volume before connecting your headphones The speakers a
52. nd Right surround sound speakers using speaker cables with exposed wires or banana plugs 23 Surround Back Left and Surround Back Right speaker outputs Connect to the Surround Back Left and Surround Back Right surround sound speakers using speaker cables with exposed wires or banana plugs 24 AC input plug Connect the power cable here Descriptions and Functions Hear Panel orri opt2 COAX COAX2 coaxa D 5 C IMPEC NCE o ager afx2 SEL T o o D a 25 TAPE L R Stereo RCA inputs Stereo RCA inputs for the TAPE input channel Connect here using stereo RCA audio red amp white cables When using a player that is connected to these inputs make sure the DTX 9909K is set to the Tape input channel 26 CD L R Stereo RCA inputs Stereo RCA inputs for the CD input channel Connect here using stereo RCA audio red amp white cables When using a player that is connected to these inputs make sure the DTX 8909K is set to the CD input channel 27 DVD L R Stereo RCA inputs Stereo RCA inputs for the DVD input channel Connect here using stereo RCA audio red amp white cables When using a player that is connected to these inputs make sure the DTX 9909K is set to the DVD input channel NOTE If a player s audio is connected to this input make sure its video is connected to a video input RCA S Video or Component that is on the DVD input channel 28 AUX1 L R Stereo RCA inputs St
53. nd has been providing patrons of bars churches schools clubs and individual consumers the opportunity to sound like a star with full scale club models in home systems and mobile units All our products offer solid performance and sound reliability and to reinforce our commitment to customer satisfaction we have customer service and technical support professionals ready to assist you with your needs We have provided some contact information for you below VocoPro 1728 Curtiss Court La Verne CA 91750 Toll Free 800 678 5348 TEL 909 593 8893 FAX 909 593 8890 VocoPro Company Email Directory Customer Service amp General Information infoQ vocopro com Tech Support techsupport vocopro com Remember Our Website Be sure to visit the VocoPro website www vocopro com for the latest information on new products packages and promos And while you re there don t forget to check out our Club VocoPro for Karaoke news and events chat rooms club directories and even a KJ Service directory We look forward to hearing you sound like a PRO with VocoPro the singer s ultimate choice FOR YOUR RECORDS Please record the model number and serial number below for easy reference in case of loss or theft These numbers are located on the rear panel of the unit Space is also provided for other relevant information Model Number Serial Number Date of Purchase Place of Purchase Features Features e 7 1 Dolby Digital
54. nly with a cart or stand that is recommended by the manufacturer 7 A An appliance and cart combination should be moved with care Quick stops excessive force and uneven surfaces may cause an overturn 8 Ventilation The appliance should be situated so its location does not interfere with its proper ventilation For example the appliance should not be situated on a bed sofa rug or similar surface that may block the ventilation slots 9 Heat The appliance should be situated away from heat sources such as radiators heat registers Stoves or other appliances including amplifiers that produce heat 10 Power Sources The appliance should be connected to a power supply only of the type described in the operating instructions or as marked on the appliance 11 Grounding or Polarization Precautions should be taken so that the grounding or polarization means of an appliance is not defeated 12 Power Cord Protection Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them paying particular attention to cords at plugs convenience receptacles and the point where they exit from the appliance 13 Cleaning Unplug this unit from the wall outlet before cleaning Do not use liquid cleaners or aerosol cleaners Use a damp cloth for cleaning 14 Power lines An outdoor antenna should be located away from power lines 15 Nonuse Period
55. nob on the front panel or the and S S When there are two small back speakers f buttons on the remote control to adjust the level L L When there are two large back speakers Level range 10dB to 10dB SW Speaker Subwoofer 1 Turn the Input Adjust knob on the front panel clock Use the Input Adjust knob on the front panel or the and wise or press the A button on the remote control to P buttons on the remote control to select the parameter raise the level 2 Turn the Input Adjust knob on the front panel counter Choices Y yes N none clockwise or press the W button on the remote control to lower the level Y Yes If your system includes a subwoofer RB VOL Right Back Surround Channel level Use the Input Adjust knob on the front panel or the and buttons on the remote control to adjust the level N None If your system does not include a subwoofer Level range 70dB to 10dB 1 Turn the Input Adjust knob on the front panel clock wise or press the A button on the remote control to raise the level 2 Turn the Input Adjust knob on the front panel counter clockwise or press the W button on the remote control to lower the level opeaker Settings Menu cont e SW VOL Subwoofer volume Use the Input Adjust knob on the front panel or the ana P buttons on the remote control to adjust the level Level range 10dB to 10dB 1 Turn the Input Adjust knob on the front panel clock wise or press the A
56. off 10 Zone2 button Toggles between input channel Zone 1 and input channel Zone 2 Zone 1 Default main mode Analog and digital input channels DVD AUX1 AUX2 AUX3 TV AM FM Tuner 7 1 CH OPT1 OPT2 COAX1 COAX2 COAX3 TAPE and CD Zone 2 Analog input channels DVD AUX1 AUX2 AUX3 TV AM FM Tuner TAPE and CD NOTE The DTX 8809K will always be set to ZONE 1 unless you press the ZONE2 button Descriptions and Functions Front Panel DTX 809K V V VOLUME INPUT ADJUST NA MIC CHANNEL F B EX POWER HEADPHONE a ers MIC 1 MIC 2 NY ED 11 Master Volume control Controls the music volume Turn clockwise to raise the music volume and counter clockwise to lower the music volume 12 Power main power button Turns the DTX 8909K s main power on and off Press the button in to turn the power on and press it out to turn the power off 13 Headphone input jack 4 Connect headphones to this jack using a V4 headphone cable The speakers are turned off while the headphones plug is connected to the headphone jack 14 Microphone Effects Mode buttons When in Karaoke Mode use these buttons to select 8 different preset vocal tone and effect configurations About Karaoke Mode and Music Mode The DTX 8909K automatically enters Karaoke Mode when a microphone is connected to either of the microphone inputs on the front panel When no microphones are connected it will be in Music Mode 15 Microp
57. one is connected to either of the microphone inputs on the front panel When no microphones are connected it will be in Music Mode Dolby Digital for 5 1 channel surround sound on DVDs that are labeled with the Dolby Digital logo Dore Dolby Digital Surround EX For 6 1 channel surround sound on DVDs that are labeled with the Dolby Digital EX logo DE ses DIGITAL EX Dolby Pro Logic Ilx Movie For 5 1 channel surround sound on DVDs and videos that are labeled with the Dolby Surround DO peter Pro Logic logo Saas This can also be used with stereo movies or TV programs and other 2 channel stereo devices Dolby Pro Logic Ilx Music For adding 5 1 surround sound to stereo sources such as music CDs and DVDs Descriptions and Functions Front Panel DTX 809K V V VOLUME INPUT ADJUST A Ss MIC CHANNEL F B EX POWER HEADPHONE 5 MIC 1 MIC 2 VOL NI ED DSP Digital Key Control button Cycles through the virtual EG settings CHURCH DISCO HALL JAZZ LIVE STA DIUM THEATER and OFF Select the one that best fits the movie or music you are playing NOTE This option is not available on the 7 1 Input channel or when playing a DVD that is set to Dolby output In Karaoke Mode use this button to raise the key of the disc music About Karaoke Mode and Music Mode The DTX 8909K automatically enters Karaoke Mode when a microphone is connected to either of the microphone inputs on the front panel When no mi
58. ophone Effects Mode buttons When in Karaoke Mode use these buttons to select 8 different preset vo cal tone and effect configurations Mic Bass buttons In Karaoke Mode adjusts the amount of Bass tone that is present in the vocal signal Press the button to increase the amount of bass and the button to decrease it Mic Treble buttons In Karaoke Mode adjusts the amount of Treble tone that is present in the vocal signal Press the button to increase the amount of Treble and the button to decrease it Mic Volume buttons In Karaoke Mode adjusts the master microphone volume Press the A button to increase the microphone volume and the W button to decrease it Mic Effect and buttons In Karaoke Mode adjusts the amount of DSP Effect that is applied to the vocal sig nal Press the button to increase the Effect level and the button to decrease it 70 Music Volume buttons Adjusts master music volume Press the A button to increase the music volume and the W button to decrease it Descriptions and Functions Hemote Control ZONE2 MENU AUX2 COX3 TUNER AUTO AUX1 0PT2 v f TEBE ea 11 EF B EX feedback eliminator button In Karaoke Mode use this button to cycle through the 3 levels of DSP feedback eliminator or to turn it off 12 Zone 2 Menu button Accesses the music Bass and Treble menus for Zone 2 Press the Zone 2 Menu button
59. r Class B digital devices Compliance with these requirements provides a reasonable level of assurances that your use of this product in a residential environment will not result in harmful interference with other electronic devices This equipment generates uses radio frequencies and if not installed and used according to the instructions found in the owner s manual may cause interference harmful to the operation of other electronic devices Compliance with FCC regulations does not guarantee that interference will not occur in all installations If this product is found to be the source of interference which can be determined by turning the unit Off and On please try to eliminate the problem by using one of the following measures Relocate either this product or the device that is being affected by the interference Use power outlets that are on different branch circuit breaker or fuse circuits or install AC line filter s In the case of radio or TV interference relocate reorient the antenna If the antenna lead in is 300 ohm ribbon lead change the lead in to coaxial type cable If these corrective measures do not produce satisfactory results please contact your local retailer authorized to distribute Vocopro products If you can not locate the appropriate retailer please contact Vocopro 1728 Curtiss Court La Verne CA 91750 CAUTION The apparatus is not disconnected from the AC power Source so long as it is connecte
60. re turned off while the headphones plug is connected to the headphone jack e When you connect a pair of headphones the listening mode is set to stereo unless it is already set to 2 Ch stereo When you disconnect the headphones the previous listening mode will resume When the multi channel input is used only the front left and right audio can be heard in the headphones Descriptions and Functions Front Panel DTX 1 9809K dr dr dr INPUT ADJUST SA MIC CHANNEL F B EX POWER HEADPHONE Papa Biji its Ean 1 Input Adjust control Cycles through the available input channels when in input mode or adjusts the parameters for various settings including audio settings surround sound settings microphone effect settings etc In Karaoke Mode this control adjusts the master microphone volume Turn clockwise to raise the master microphone volume and counter clockwise to lower it About Karaoke Mode and Music Mode The DTX 8909K automatically enters Karaoke Mode when a microphone is connected to either of the microphone inputs on the front panel When no microphones are connected it will be in Music Mode 2 Display screen Displays various operating information e g Main Volume DSP source and parameter etc 3 Input button Enters input mode and cycles through the available input channels The Input Adjust control can also be used to cycle through the available input channels when the receiver is in inpu
61. s The power cord of the appliance should be unplugged from the outlet when left unused for a long period of time 16 Object and Liquid Entry Care should be taken so that objects do not fall and liquids are not spilled into the enclosure through openings 17 Damage Requiring Service The appliance should be serviced by qualified service personnel when The power supply cord or plug has been damaged or Objects have fallen into the appliance or The appliance has been exposed to rain or The appliance does not appear to operate normally or exhibits a marked change in performance or The appliance has been dropped or the enclosure damaged m OOU 18 Servicing The user should not attempt to service the appliance beyond that described in the operating instructions All other servicing should be referred to qualified service personnel Note To CATV system installer s U S A This reminder is provided to call the CATV system installer s attention to Article 820 40 of the NEC that provides guidelines for proper grounding and in particular specifies that the cable ground shall be connected as close to the point of cable entry as practical THE SINGERS ULTIMATE CHOICE Welcome And thank you for purchasing the DTX 9909K from VocoPro your ultimate choice in Karaoke entertainment With years of experience in the music entertainment business VocoPro is a leading manufacturer of Karaoke equipment a
62. s DVG 888K rear panel 1NV 4001 WV xvoo Wd 060 DTX 89909K rear panel Audio connections DVG 888K rear panel WARNING 1Nv d007 WW DTX 9909K rear panel Connecting to a TV using the RCA Video yellow Output What you will need TV video monitor with an RCA video input RCA video cable yellow 1 Connect one end of the RCA video cable to the RCA video OUT jack on the DTX 8809K rear panel 2 Connect the other end of the RCA video cable to the RCA video input on the TV Video monitor Make sure the TV Video monitor is set to the correct video input Consult the TV Video monitor s user manual for the necessary instructions 1NVd001 WY ANTENNA a xvoo Wd DTX 9909K rear panel Getting Connected cont Connecting a DVD Player Video using S Video Inputs There are 5 available S Video inputs located on the rear panel NOTE Make sure you connect each player s S Video the same input on the DTX 8909K that that player s audio is connected to i e If it is connected to the AUX1 audio inputs connect to the S Video input on the AUXT input channel What you will need Player with an S Video output e S Video cable 1 Connect one end of the S Video Cable to the S Vid
63. speakers 140 Gunshot blast Jet plane 180 Rocket launching pad Information courtesy of the Deafness Research Foundation Safety Instructions IN CAUTION RISK OF SHOCK CAUTION To reduce the risk of electric shock do not remove cover or back No user serviceable parts inside Only refer servicing to qualified service personnel Explanation of Graphical Symbols The lightning flash amp arrowhead symbol within an equilateral triangle is intended to alert you to the presence of danger The exclamation point within an equilateral triangle is intended to alert you to the presence of important operating and servicing instructions WARNING To reduce the risk of fire or electric shock do not expose this unit to rain or moisture 1 Read Instructions All the safety and operating instructions should be read before the appliance is operated 2 Retain Instructions The safety and operating instructions should be retained for future reference 3 Heed Warnings All warnings on the appliance and in the operating instructions should be adhered to 4 Follow Instructions All operating and use instructions should be followed 5 Attachments Do not use attachments not recommended by the product manufacturer as they may cause hazards 6 Water and Moisture Do not use this unit near water For example near a bathtub or in a wet basement and the like 7 Carts and Stands The appliance should be used o
64. st knob on the front panel clock wise or press the button on the remote control to increase the treble 2 Turn the Input Adjust knob on the front panel counter clockwise or press the W button on the remote control decrease the treble MIC DELAY Microphone Echo Delay Effect Use this setting to set the delay time for the DSP micro phone echo effect NOTE The DSP effect volume must be set loud enough in order to hear the effect Use the Input Adjust knob on the front panel or the and buttons on the remote control to adjust the delay time Delay Time Range Oms 250ms 1 Turn the Input Adjust knob on the front panel clock wise or press the button on the remote control to increase the delay time 2 Turn the Input Adjust knob on the front panel counter clockwise or press the W button on the remote control decrease the delay time REPEAT Microphone Echo Repeat Effect Use this setting to set the amount of repeat for the DSP microphone echo effect NOTE The DSP effect volume must be set loud enough in order to hear the effect Use the Input Adjust knob on the front panel or the and buttons on the remote control to adjust repeat level Repeat Range OdB 80dB 1 Turn the Input Adjust knob on the front panel clock wise or press the A button on the remote control to increase the repeat level 2 Turn the Input Adjust knob on the front panel counter clockwise or press the W button on the remote control
65. ster Volume control 25 Matching up the Correct Video Input 20 21 Memory button 32 Menu button 31 MIC1 VOL 41 MIC2 VOL 41 Microphone Effects Mode buttons 25 30 Microphone input 25 Microphone volume controls 25 MIC BASS 41 Mic Bass 30 MIC DELAY 41 MIC TREB 41 Mic Treble 30 Mic Volume buttons 30 Music Volume buttons 30 Mute button 30 M Speaker 37 Index cont N Navigating through the Karaoke Mode Settings Menu 40 Neo 6 CIN 44 Neo 6 CINEMA 44 Neo 6 MUS 44 0 OK 42 OPT1 Digital Optical Audio input 29 OPT2 Digital Optical Audio input 29 P Playback Mode Display Abbrevations and Full Working Names 44 Playing DOLBY DIGITAL or DOLBY DIGITAL SURROUND EX encoded DVD CDs 44 Playing DTS or DTS ES encoded DVD CDs 44 Playing PCM encoded music CDs 44 Playing PCM encoded music CDs or analag signals 44 Power 34 Power main power button 25 Power Cable 11 Power On and Off 34 Preparing the Speaker Cable 12 Pro Logic IIx button 32 R HB VOL 38 RCA Video output 26 Record Out L R RCA jacks 28 REC OUT 14 Remote Control 11 REPEAT 41 Resetting the Factory Presets 46 RVB TIME 42 RVB VOLUME 42 5 S Video output jack 27 Scan and 32 Selecting an Input Channel 34 Selecting the Correct input channel 15 Selecting the correct input channel 20 21 Sleep button 30 Speaker Output Levels 38 Speaker Settings Menu 37 Speaker Tone Settings 39 Standby 34 Standby button 30 St
66. t 100HZ C Speaker Center Speaker Egs Bon Sr Een SER Use the Input Adjust knob on the front panel or the and buttons on the remote control to select the parameter Choices Large Small and None Large If you have a large surround center speaker The entire range of the surround center signal is directed to the surround center speaker Small If your center speaker does not have a high ability for bass reproduction In this position low bass signal 100 Hz in the center channel is output from the sub woofer speaker or from the left and right main speaker if the subwoofer setting is set to the N none position None Select this position if your system does not include the center speaker The center channel will be output from the left and right speakers instead opeaker Settings Menu cont S Speaker Surround Left and Right Speakers Adjusting Speaker Output Levels Use the Input Adjust knob on the front panel or the and P buttons on the remote control to select the parameter e FL VOL Front Left Channel level Use the Input Adjust knob on the front panel or the and Choices Large Small and None P buttons on the remote control to adjust the level Large If you have large surround left and right speakers Level range 1OdB to 10dB PEN 1 Turn the Input Adjust knob on the front panel clock Small Select this position if your surround left and right wise or press the A button on the remote
67. t mode 4 Main Menu Enters the Main Menu and cycles through the available menu options Use the Input Adjust control to change the actual settings for each menu option 5 DTS DTX ES and DTS NEO 6 b Digital Key Control button In Music Mode use this button to select the correct DTS setting Select DTS when playing a disc that is formatted with DTS 5 1 surround sound DTS ES when using a disc that is formatted with DTS ES 6 1 surround sound and DTS NEO 6 to create virtual 5 1 or 6 1 surround sound from a 2 channel source such as a VCR CD player etc In Karaoke Mode use this button to lower the key of the disc music About Karaoke Mode and Music Mode The DTX 8909K automatically enters Karaoke Mode when a microphone is connected to either of the microphone inputs on the front panel When no microphones are connected it will be in Music Mode NOTE In order to get true 5 1 or 6 1 surround sound the disc must be formatted with 5 1 or 6 1 surround sound audio Check your disc s packaging if you are not sure whether it is formatted for 5 1 or 6 1 surround sound 6 Dolby mode select 4 Digital Key Control button Cycle between the Dolby Digital Dolby Digital Surround EX mode and the Dolby Pro Logic IIx Movie Music modes In Karaoke Mode use this button to reset the key of the disc music back to its original or natural key About Karaoke Mode and Music Mode The DTX 8909K automatically enters Karaoke Mode when a microph
68. tch is turned off We recommend that you unplug the power cord from the wall outlet if the unit is not going to be used for a long time This will save electricity and help prevent fire hazards To disconnect the cord pull it out by grasping the plug Never pull the cord itself 10 To prevent lightning damage pull out the power cord and remove the antenna cable during an electrical storm 11 The general digital signals may interfere with other equipment such as tuners or receivers Move the system farther away from such equipment if interference is observed NOTE Please check the copyright laws in your country before recording from records compact discs radio etc Recording of copyrighted material may infringe copyright laws Listening for a lifetime Selecting fine audio equipment such as the unit you ve just purchased is only the start of your musical enjoyment Now it s time to consider how you can maximize the fun and excitement your equipment offers VocoPro and the Electronic Industries Association s Consumer Electronics Group want you to get the most out of your equipment by playing it at a safe level One that lets the sound come through loud and clear without annoying blaring or distortion and most importantly without affecting your sensitive hearing Sound can be deceiving Over time your hearing comfort level adapts to a higher volume of sound So what sounds normal can actually be loud and harmful to your hearing
69. the rear panel of DTX 9909K following steps 1 5 on page 12 DTX 9909K rear panel 5 9 Sd e e o e o SPEAKERS OUTPUT SPEAKERS IMP EDANCE 4 16 OHMS RECOMMEND IMPEDANCE 8 OHMS Connecting to the SURROUND speaker terminals Connect a pair of surround positioned speakers to the and SURROUND terminals on the rear panel of DTX 9909K following steps 1 5 on page 12 Connecting to the SURROUND BACK speaker termi nals Connect a pair of rear surround speakers to the and SURR BACK terminals on the rear panel of DTX 9909K fol lowing steps 1 5 on page 12 Getting Connected cont Connecting to the REC OUT jacks The L R red and white RCA Record Output jacks on the rear panel can be connected to any self powered input device with RCA inputs i e recording device powered speakers etc What you will need Powered device with L R RCA inputs e RCA L R audio cable red amp white Connect one end of the red and white RCA cable to the HEC OUT jacks on the DTX 8909K s rear panel Connect the other end of the red and white RCA cable to the RCA inputs on the recording device powered speak ers etc AN aS NA S SY NJ E AUXI Y Pe Ca PR CR AUX Y Pa Cs PR CR J N L c SL DTX 9909K rear panel CDR 1000 PRO rear panel OUTPUT BAL UNBAL BAL UNBAL Connecting to the ZONE2 PRE jacks The ZONE 2 channel allows you to output any of the analog
70. tions Ni 9e e OO W4 1NVdOO WW e r9 666 666 TAPE co DVD auxi AUX2 We DTX 9909K rear panel Getting Connected cont Connecting a DVD Player Video using the Compo nent Video Input s There are Component Video Y Pb Cb Pr Cr inputs on 3 of the DTX 88089K s input channels DVD AUX1 and AUX2 NOTE When connecting a player to the Component Video inputs make sure that the player s audio outputs are con nected to the same input channel i e If the player is con nected to the Y Pb Cb Pr Cr inputs on the AUX2 channel make sure that the player s audio is connected to AUX2 audio inputs as well What you will need Player with Component Video outputs e Set of component video cables 1 Connect one end of each of the component video cables to the Component Video Y Pb Cb Pr Cr outputs on the player Connect the other ends of the component video cables to one of the Y Pb Cb Pr Cr Inputs on the DTX 9909K rear panel Select the proper input channel on the DTX 9909K NOTE 3 of the A V input channels have Com ponent video inputs DVD AUX1 and AUX2 so make sure the correct one is selected Selecting the correct input channel Front panel Press the INPUT button on the DTX 9909K front panel until the correct input channel is displayed on the screen Remote Control Press the corresponding input button on the remote control to access the
71. tting Started About the Remote Control e The area between the remote control and the main unit must be clear of large obstacles Do not expose the remote control sensor to strong light ing especially an inverter type fluorescent lamp as this may cause the remote control to not function properly Installing Batteries in the Remote Control 1 Turn the remote control over and slide the battery com partment cover off towards the direction of the arrow 2 Insert the AA batteries positioning them according to the polarity markings on the inside of the battery compartment Close the battery compartment cover Battery Replacement If you find that the distance between the remote control and the main unit must be shorter in order to use the remote control this means that the batteries are low and must be changed Replace both batteries with new ones Battery Notes Use AA batteries Be sure the polarities are correct See the illustra tion inside the battery compartment e Remove the batteries when not using the remote control for an extended period of time f batteries leak dispose of them immediately Avoid skin clothing and any other contact with the leaked material Clean the battery compartment thoroughly before installing new batteries Do not mix old and new batteries Do not mix alkaline standard carbon zinc with recharge able nickel cadmium batteries Connecting the Po
72. wer Cable Plug the supplied AC power cable into the AC inlet after all other connections are complete and then plug the AC power cable to an AC wall outlet CAUTION Use the supplied AC cable Do not use other AC power cables as doing so may result in fire hazard or electrical shock 6 5 E ca 115V 60Hz Getting Connected Connecting Speakers The Speaker Terminals are located on the rear panel There are two FRONT terminals one CENTER terminal Two SUR ROUND terminals and two SURR BACK surround back terminals Be sure to connect the left channel L right channel R red and black properly DTIX 8909K rear panel FRONT SURROUND SURR BACK secsee 000006 SPEAKERS OUTPUT SPEAKERS IMPEDANCE 4 16 OHMS RECOMMEND IMPEDANCE 8 OHMS Caution e f using 4Q speakers be sure to set the DTX 9909K s speaker impedance setting to 4Q before using If using 8Q speakers make sure it is set to 80 The speaker impedance switch is located on the rear panel Impedance Switch Before connecting the speakers make sure that the DTX 9909K is disconnected from the power source Do not let the bare speaker wires touch each other or another metal part of this unit This could damage the DTX 9909K and or the speakers Preparing the Speaker Cable You can either used an exposed speaker wire or Banana Plug speaker cab
73. your video output devices TVs and video monitors for specific information regarding the use of these outputs and inputs Connecting a DVD Player with RCA Audio and Video Outputs A DVD or other A V player can be connected to any of the 5 inputs using the L R red amp white RCA audio inputs and the RCA video yellow input What you will need Player with RCA audio and video outputs RCA L R audio cable red amp white RCA video cable yellow Audio 1 Connect one end of the red and white RCA audio cable to the L R audio outputs on your player 2 Connect the other end of the red and white RCA audio cable to one of the L R audio inputs on the DTX 9909K rear panel Video 1 Connect one end of the RCA video cable to the RCA video output on your player 2 Connect the other end of the RCA video cable to one of the RCA video inputs on the DTX 9909K s rear panel 3 Select the proper input channel on the DTX 9909K NOTE All 5 of the A V input channels have RCA audio and video inputs so make sure the correct one is selected Selecting the Correct input channel Front panel Press the INPUT button on the DTX 9909K front panel until the correct input channel is displayed on the screen Remote Control Press the corresponding input button on the remote control to access the correct input channel i e AUX1 for the AUX1 input channel DVD OPT1 for the DVD input channel etc Getting Connected cont Video connection

VocoPro DTX-9909K Stereo Receiver User Manual

Contents

Download Pdf Manuals

Related Search

Related Contents