Home

Toshiba X3030 Flat Panel Television User Manual

1. 10 When the search is complete the television will automatically select programme one The AUTO TUNING screen will display the total number of services found AUTO TUNING 94 programmes found m 58 TV 27 Radio H9 Text Press OK to watch programme Prog Name Type UHF Quality 1 BBC ONE m 34 GOOD 2 E A gt DM E Goon C E 2 5 6 Five CE ooD ITV2 31 ooR Change Watch PageUp Page Down Sort Use V or A to move through the list to select a programme then press OK to view NOTE The time will be set automatically by transmission but can be advanced or decreased by up to 2 hours using Local Time Settings Digital auto tuning NOTE As new services are broadcast it will be necessary to re tune the television in order to view them Auto tuning Auto tuning will completely re tune the television and can be used to up date the channel list It is recommended that Auto tuning is run periodically to ensure that all new services are added All current programmes and settings i e favourites and locked programmes will be lost 1 Press MENU the SETUP MENU will appear Use Vto highlight Auto tuning Press OK 2 A screen will appear warning that previous digital programmes and settings will be deleted Press OK to continue with the Auto tuning WARNING Q All previous digital programmes and settings will be deleted Continue 4 YES gt CoS tage ME
2. SETUP MENU E _ Selec Manual tuning from the SETUP MENU Local Options e OK Manual tuning STOK 2 Enter the multiplex number using the number buttons and then press OK The television will Programmes OK automatically search for that multiplex MENU Jit Watch TV and press OK When the multiplex is found any channels not currently on the programme list will be added 3 With the list of stations now showing use W or ane the ibe on intorna at the top of A to highlight the station you want to move and the screen will be updated ress P P ED Repeat as necessary Press EXIT to finish The selected station will be moved to the right of the screen PROGRAMMES Prog Name 1 2 C C 5 6 m Five fm iTv2 ree EE OCE MENU J Ft ven EXIT AVECINA Page Up Page Down 12 Tuning Analogue mode for the first time The Quick Setup feature will tune all analogue channels currently available in the area To put the television into ATV mode press the A D button Select ATV mode The Quick Setup screen will appear Quick Setup Select your language Language Watch TV Using lt or gt select your language then press OK Then press lt d or to select your country To start Auto tuning press OK Auto tuning ETE The search will begin for all available stations The slide bar will move along the line as the search progresses You must allow the telev
3. Most of the picture controls and functions are available in both digital and analogue modes To access the required menus when in digital mode press MENU and using select TV setup press OK then lt or P to select the desired menu PLEASE NOTE features not available in digital mode will be greyed out To access the required menus when in analogue mode press MENU and use lt or gt to select the desired menu Picture position analogue only The picture position may be adjusted to suit personal preference and can be particularly useful for external inputs 1 In the SET UP menu press W until Picture position is highlighted Quick Setup Watch TV Press OK to view the options available for the picture format that has been selected Press A and to select an option then lt or gt to adjust the settings The options alter depending on the widescreen format chosen and when viewing connected equipment In Cinema 2 Picture position Horizontal position 4 eee Vertical position a gt Back Watch TV To return to the original factory settings select Reset in the Picture position menu and press OK 21 Backlight Adjusting the Backlight can improve the clarity of the screen when viewing In the PICTURE menu press W to select Picture settings then press OK Picture settings 3D Colour management Base colour adjustment Active Backlight Control Watch TV In the Picture setting
4. Side panel adjustment The Side panel feature lightens or darkens the band each side of the screen when in 4 3 or 14 9 format This helps prevent image retention of the band and can also make viewing in bright or dark conditions more comfortable 1 In the FUNCTION menu press W until Side panel is highlighted 2 Press lt d or gt to adjust Picture still This feature is used to hold a still image on the screen 1 Press to hold an image on the screen press D again to cancel Panel lock Panel lock disables the buttons on the television All buttons on the remote control can still be used From the FUNCTION menu select Panel lock and choose On or Off using lt or gt Teletext Panel lock Auto format 4 3 stretch Blue screen Side panel Back Watch TV When Panel lock is On a reminder will appear when the buttons on the television are pressed If the standby button is pressed the television will switch off and can only be brought out of standby by using the remote control The timers English 5 When all the details have been entered press OK Programme timer digital only 1o save thie irer This feature will set the television to go to a specific Auto start VCR If your Toshiba media recorder is AV link channel at a certain time It can be used to view a compatible setting this feature to YES will auto start stop particular programme or by setting the mode to daily or a recording w
5. 640 x 480 60 Hz VESA VGA 640 x 480 75 Hz VESA SVGA 800 x 600 60 Hz VESA SVGA 800 x 600 75 Hz VESA XGA 1024 x 768 60 Hz VESA XGA 1024 x 768 70 Hz VESA XGA 1024 x 768 75 Hz VESA WXGA 1280 x 768 60 Hz VESA WXGA 1280 x 768 60 Hz VESA Reduced Blanking WXGA 1280 x 768 75 Hz VESA WXGA 1360 x 768 60Hz VESA SXGA 1280 x 1024 60 Hz SXGA 1280 x 1024 75 Hz IMPORTANT NOTE SXGA will display but it will not be to VESA standards When connecting a PC using HDMI the following signals can be accepted 1080i 50 60Hz 1080p 50 60Hz 720p 50 60Hz Controls and input connections A wide variety of external equipment can be connected to the input sockets on the side of the television Whilst all the necessary adjustments and controls for the television are made using the remote control the buttons on the television may be used for some functions RED LED Standby w l GREEN LED Power on Standby GREEN LED Active standby digital only GREEN LED Timer analogue only Uc a ye vv gt a lt Tag S MENU Lae 7 VIDEO Q nput 3 OK side will take Priority over EXT3 back if oth connections are used at the same time Switching on If the RED LED is unlit check that the mains plug is connected to the power supply If the picture does not appear press C on the remote control it may take a few moments To
6. press MENU to return to the list of channels and select the next number to tune Press EXIT when you have finished To name external equipment e g DVD on EXT2 press to select 2 then select Manual setting from the SET UP menu Press to select Label then using A V lt and P put in the required characters Press OK 86 60 Manual setting Pease Note This television has direct channel entry if the channel numbers are known Select the Manual tuning screen in Step 3 Enter the Programme number the System then C for standard terrestrial channels or S for cable channels and the Channel number Press OK to store 15 Using Auto tuning 1 To set up the television using Auto tuning press MENU and use lt or gt to select the SET UP menu Language Country Auto tuning Manual tuning Antenna Amplifier AV connection Back Watch TV Press W to highlight Language and lt or gt to select Using V highlight Country then lt or P to select The television will now tune the stations for your country Press W to highlight Auto tuning then press OK Auto tuning Previous settings will be lost Press EXIT for no change Press OK to start Auto tune Watch TV O To start Auto tuning press OK You must allow the television to complete the search When the search is complete the television will automatically select programme position 1 This may not be a clea
7. Input Side Phono jack Video Phono jaag mole Headphone socket 3 5mm stereo HDMI 1 2 Input HDMI 1080p LIP SYNC Accessories Remote control PC Input Mini D sub 15 pin Analog RGB signal 2 batteries AAA IEC RO3 1 5V PC HDMI1 Audio Phono jacks Audio L R Digital Audio Output S PDIF Optical Output to Active Super Woofer Phono jack Fixed Audio Output Phono jacks Audio L R DVB is a registered trademark of the DVB Project as Printed on recycled paper 100 Chlorine free Toshiba Information Systems U K Limited All rights reserved Reproduction in whole or part without written permission is strictly prohibited Toshiba Information Systems U K Limited Consumer Products Division European Service Centre Admiralty Way Camberley Surrey GU15 3DT UK Specification is subject to change without notice Originated by Zushi Illustration amp Visualisation Bristol UK 42
8. a list of the digital channels that are watched most Four lists can be created these can be a mixture of television text and radio channels 1 From the FEATURE MENU press V to select Favourite and Locked Programmes FAVOURITE AND LOCKED PROGRAMMES Prog Type Name C o BBC TWO m ivi Channel 4 Five m Tv2 EHEHEHEH b PE MENU LA geUp PageDown Select all Deselect all 2 Use Aand to go through the list of channels pressing OK to select the ones required a tick will appear in the box 3 Press to select List 2 Follow the same procedure to make the selection When all favourites have been selected press MENU to return to the FEATURE menu Use to highlight Favourites and lt or gt to select between ALL TV RADIO FAV 1 and FAV 2 The number of favourites available depends on how many lists have been created FEATURE MENU Parental Control e OK Favourite and Locked Programmes e OK Favourites FAV 1 gt Common Interface Slots NO MODULE Software Upgrade e OK MENU EUER EXIT AVEO A O Press EXIT Using the A P w buttons will now only access those channels in Favourite List 1 when FAV 1 is selected 29 Locking programmes Locked Programmes stops the viewing of digital channels they can only be accessed by entering the PIN 1 From the FEATURE MENU press V to select Favourite and Locked Programmes D Press
9. decoder could ro ae 1 j Tg use as a handle and be Digital Satellite upto 7 i i L remove all cables her LY re or any ot eE A A E XING STRAP amp Moving the compatible e POOMI 1 _ television s AUDIO i a i A t cesececececcececeocecese ZN TTT 1 H E i z n s errs SS A H Gp Al E E2 G OrcBiPc HDMI 1 2 a MEDIA REC HDMI INPUT decoder mm AM bo PRN I SOCKETS media recorder Aerial cables a ut Connect the aerial to the socket on the rear of the television If you use a decoder and or a media recorder it is essential that the aerial cable is connected through the decoder and or through the media recorder to the television SCART leads seseeceeeeneeees AA Connect the video recorder IN OUT socket to the television Connect the decoder TV socket to the television Connect the media recorder SAT socket to the decoder MEDIA REC socket Before running Auto tuning put your decoder and media recorder to Standby The phono sockets alongside the COMPONENT VIDEO INPUT sockets will accept L and R audio signals The Digital Audio Output socket enables the connection of a suitable surround sound system NOTE this output is always active In addition there is a fixed external audio ouput which enables the connection of a suitable Hi Fi unit Make sure the Speaker option in the Sound menu is set to Off HDMI High Definition Multimedia Int
10. on the television screen Press 9 whilst watching a normal television broadcast to see a time display from the broadcaster It will remain on screen for about 5 seconds Sound controls Volume Press lt 1 or lt 1 to adjust the volume Sound Mute Press BK once to turn the sound off and again to cancel 17 Bass Treble and Balance The sound controls are accessible in digital and analogue modes as are most of the televisions features 1 In digital mode press MENU and using V highlight TV setup then press OK Use lt q or gt to select SOUND In analogue mode press MENU and lt or gt to select SOUND Bass Treble Balance wow Stable sound Back Watch TV Press W to highlight Bass Treble or Balance and lt or gt to change the setting When connecting to a Hi fi unit set the Speaker option to Off Press W to highlight Speaker and or P to select Off ME v2 Bass boost Bass boost level Watch TV English Sound controls continued SRS WO is sound effects dual stable sound Bass boost Bass boost enhances the depth of the sound on the TV speakers The difference will only be noticeable on sound with a strong bass In the SOUND menu press W to highlight Bass boost Use lt or gt to select On Then press W to highlight Bass boost level and using lt or gt adjust to suit your preference Speaker Bass boost Bass boost level Watch TV When a
11. repeatedly to select the Locked Programme list Use A and to go through the list of channels pressing OK to select the ones required a padlock will appear in the box FAVOURITE AND LOCKED PROGRAMMES Prog Type Name EB Bac one 2 BOEEN 3 Some 4 BOR 5 m Five 6 mv Oca MENU F N PageUp PageDown Lock all Unlock all Press EXIT and put the television into standby When the television is switched back on and any of the channels in the Locked Programme list are selected the PIN must be entered before they can be accessed Encrypted programmes Selecting Encrypted Programmes allows all encrypted programmes to be shown in the programme list even if they are not available to select 1 In the FEATURE MENU press A or W to select Encrypted Programmes D Use lt q or gt to select ON or OFF NOTE CAMs Conditional Access Modules are available from service providers see Common Interface section Digital settings nines audio languages audio output subtitles reset ty common interface Audio languages Subtitles This feature allows a programme or film to be viewed with This feature will show subtitles on the bottom of the a choice of soundtrack language provided they are screen in the selected language provided they are being currently being broadcast broadcast 1 In the SETUP MENU press W to select Local 1 In the LOCAL OPTIONS menu press V t
12. the text over a normal broadcast picture and again to return to normal viewing Programmes cannot be changed until text is cancelled The first text page shown will be the initial page Any text page can be accessed by entering the 3 digit page number using the numbered buttons pressing the coloured buttons or pressing P A to advance to the next page and P to go back to the previous page Sub pages If there are sub pages they will automatically load into memory without changing the page on screen To access the sub pages press E9 then use PW and P w to view them A bar with numbers will appear on the side of the screen 35 The sub page you are viewing will be highlighted and as the television loads any additional sub pages the colour of the numbers will change indicating that these pages have been loaded These sub pages will remain available to view until another page is chosen or in normal TV mode the channel is changed Navigating pages using Auto If Fastext is available four coloured titles will appear at the base of the screen To access one of the four given subjects press the relevant coloured button on the remote control For further information on your particular text system s see the broadcast text index page or consult your local Toshiba dealer Navigating pages using LIST The four coloured choices at the bottom of the screen are numbers 100 200 300 and 400 which have been programmed
13. to choose between Dual 1 or Dual 2 Stable sound The Stable Sound feature limits high volume levels on the TV speakers preventing the extreme changes in volume that can occur when channels are changed or a programme switches to a commercial 1 Select the SOUND menu Use to highlight Stable sound then press lt or P to select On or Off Widescreen viewing Depending on the type of broadcast being transmitted programmes can be viewed in a number of formats Press the amp button repeatedly to select between PC Exact scan Wide Super Live 2 Cinema 2 4 3 Super Live 1 Cinema 1 Subtitle and 14 9 SUPER LIVE 1 This setting will enlarge a 4 3 image to fit the screen by stretching the image horizontally and vertically holding better proportions at the centre of the image Some distortion may occur SUPER LIVE 2 If a side panel format signal is being received this setting will enlarge the image to fit the screen by stretching the image horizontally and vertically holding better proportions at the centre of the image Some distortion may occur 0 CINEMA 1 When watching letterbox format films video tapes this setting will eliminate or reduce the black bars at the top and bottom of the screen by zooming in and selecting the image without distortion o CINEMA 2 When watching all sides panel format films video tapes this setting will eliminate or reduce the black bars at al
14. 00 74 250 1920 1080 640 480 720 480 1280 720 1920 1080 640 480 720 480 1280 720 Prog 45 000 60 000 74 250 1920 1080 Int 33 750 60 000 74 250 1920 1080 Prog 56 250 50 000 148 500 1920 1080 Prog 67 433 59 940 148 352 1920 1080 Prog 67 500 60 000 148 500 Int Interlace Prog Progressive 41 English Specifications and accessories DVB T Broadcast systems channels Broadcast systems channels Stereo Nicam UK UHF 21 68 PAL I UHF UK21 UK69 2 carrier system France VHF 05 10 VHF 01 05 PAL B G UHF E21 E69 Visible Screen Size Model 32 80cm UHF 21 69 VHF E2 E12 1 S41 approx 37 94cm 42 107cm Germany VHF 05 12 SECAM L UHF F21 F69 HF 21 6 VHF F1 F10 B U 2 Display 16 9 Switzerland VHF 05 12 SECAM D K UHF R21 R69 UHF 21 69 VHF R1 R12 Sound output at 10 distortion Main 10W 10W Italy VHF 05 12 D E FG H H1 H2 Power consumption Model 32 154W UHF 21 69 as specified in 37 190W EN60107 1 1997 42 241W Spain UHF 21 69 Standby approx Model 32 lt 1W Video Input PAL SECAM NTSC 3 58 4 43 37 lt 1W External connections 4 SIW EXT Input Output 21 pin SCART RGB A V t K Selectable output Dimensions Model 32 60cm H 80cm W 29cm D approx 37 67cm H 92cm W 29cm D EXT2 Input Output 21 pin SCART AN S video 42 73cm H 103cm W 34cm D Selectable output Height dimension includes foot stand EXT3 Input Phono jacks Y Pa Cp Pr Cp Weight approx Model 32 18kg Phono jacks AV 37 22kg 3 7 42 27 5kg EXT3
15. 33 English Input selection and AV connections continued PC audio In order to receive sound from a connected PC plug the audio cable into the back of the television as shown in Connecting a computer section then use the PC HDMI1 audio settings In the SET UP menu press W until AV connection is highlighted then press OK Language Country Auto tuning Manual tuning Antenna Amplifier AV connection Back Watch TV Highlight PC HDMI1 audio then use to gt select the PC option AV connection PC HDMI audio we HDMI audio OOo a EXT output B LET input a CoE l Woofer aT Watch TV NOTE Selecting the PC option will force HDMI into digital audio HDMI the HDMI logo and High Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC 34 HDMI1 audio If the connected HDMI source does not support digital audio plug the audio cable into PC HDMI1 audio on the back of the television as shown in the Connecting a computer section then use the HDMI audio settings In the AV connection menu press Y to highlight PC HDMI1 audio and using select HDMI1 Then highlight HDMI1 audio and using lt or gt select Auto Digital or Analogue AV connection PC HDMI audio o MM HDMI1 audio Auto gt EXT output A ET input ee E Watch TV If the sound is missing select an alternative setting NOTE HDMI1 supports digital and analo
16. EG noise reduction MPEG NR digital noise reduction DNR Picture controls colour temperature 3D colour management base colour adjustment Picture controls active backlight control cinema mode antenna amplifier automatic format widescreen Picture controls 4 3 stretch blue screen side panel adjustment picture still Panel lock disabling the buttons on the television DIGITAL programme timer Sleep timer DIGITAL on screen information and programme guide DIGITAL settings parental controls setting the PIN mode DIGITAL settings favourite programmes locked programmes encrypted programmes DIGITAL settings audio languages audio output subtitles reset TV common interface DIGITAL settings software upgrade version automatic upgrade searching for new software PC settings picture position clock phase sampling clock reset Input selection and AV connections input and output sockets for connected equipment analogue switch off TEXT SERVICES ANALOGUE text setting up general information Auto and LIST modes ANALOGUE text control buttons PROBLEM SOLVING Questions and Answers answers to some of the more common queries including manual fine tuning and colour system INFORMATION Notes for your own records Information signal information Specifications and Accessories technical information about the television supplied accessories 3 o ONDUR 40 42 Safety Precaut
17. NU Jerry The television will start to search for all available stations AUTO TUNING Progress CD Prog Name Type UHF Quality 70 EE 34 oop 87 elite fm 21 EOR EXIT er UIZ 11 You must allow the television to complete the search When the search is complete the Auto tuning screen will display the total number of services found AUTO TUNING 94 programmes found m 58 TV 27 Radio H9 Text Press OK to watch programme Prog Name Type UHF Quality 1 BBC ONE m 34 GOOD 2 3 4 5 6 Change Watch MENU Back Page Up Page Down Sort Use V or A to move through the list to select a programme then press OK to view Digital programme sorting manual tuning English NOTE When the television is switched off the mode being viewed at the time will automatically be selected when the television is switched back on O Use V or A to move through the list to your preferred position As you do so the other stations will move to make room Programme sorting 1 The station order may be changed to suit O Press lt q to store your move Repeat as personal preference Press MENU the SETUP necessary then press EXIT MENU will appear on screen 2 Use V to move down through the list and highlight Programmes Press OK Manual tuning This feature is available for service engineers or can be used for direct channel entry if the multiplex channel is known
18. TOSHIBA C3030 X3030 Series Contents SETTING UP Safety precautions Some do s and don ts for you to be aware of Installation and important information The remote control an at a glance guide Connecting external equipment a guide to connecting external equipment to the back of the television Connecting a computer connecting a computer to the back of the television Controls and input connections switching on the television standby using the controls on the television headphone socket connecting equipment to the side input sockets TUNING THE TELEVISION DIGITAL tuning the television for the first time DIGITAL auto tuning DIGITAL programme sorting manual tuning ANALOGUE tuning analogue mode for the first time language country ANALOGUE manual tune broadcast system ANALOGUE auto tune ANALOGUE programme skip sorting programme positions CONTROLS AND FEATURES General controls changing programme position Stereo and bilingual transmissions stereo mono or dual language broadcasts Time display analogue only Sound controls volume sound mute bass treble balance Sound controls bass boost super woofer dual analogue only stable sound SRS WOW sound effects SRS 3D FOCUS and TruBass Widescreen viewing Picture controls picture position analogue only back light Picture controls picture preferences contrast brightness colour tint sharpness black stretch MP
19. amp to EJECT Ma4 24 hours press W to STOP TOSHIBA gt gt 24 hours CT 90273 44 1 page press lt to SKIP REWIND ae press P to SKIP FORWARD page Inserting batteries and effective range of the remote Remove the back cover to reveal the battery compartment and make sure the batteries are inserted the right way round Suitable battery types for this remote are AAA IEC RO3 1 5V Do not combine a used old battery with a new one or mix battery types Remove dead batteries immediately to prevent acid from leaking into the battery compartment Dispose of them in a designated disposal area Warning batteries must not be exposed to excessive heat such as sunshine fire or the like The performance of the remote control will deteriorate beyond a distance of five metres or outside an angle of 30 degrees from the centre of the television If the operating range becomes reduced the batteries may need replacing Connecting external equipment Before connecting any external equipment turn off all main power switches If there is no switch remove the mains plug from the wall socket COMPONENT VIDEO EXT3 Gn Ge Pa Woeonrut VARIABLE OIO A T eolo im I r tiro roan Ge can be use A our ull ae d for coal a al a oS 3 1a recorder and i i bee A e dio cables Do not a
20. e television is too strong this may result in picture interference and or a buzzing sound Setting Antenna Amplifier to Off reduces the signal strength and can help to remove the interference 2 With lt or gt select either On or Off In the SET UP menu press W until Antenna Amplifier is highlighted Language Country Auto tuning Manual tuning Antenna Amplifier AV connection Back Watch TV Automatic format Widescreen When this television receives a true Widescreen picture and Auto format is On it will automatically be displayed in Widescreen format irrespective of the television s previous setting 1 Press MENU and lt or gt to select the FUNCTION menu Teletext Panel lock Auto format Watch TV D Press W to highlight Auto format then lt or gt to select On or Off Picture controls lt ontinuea panel lock 4 3 stretch When 4 3 stretch is activated the size switching system changes 4 3 programs into a full screen picture In the FUNCTION menu press W to highlight 4 3 stretch Teletext Panel lock Blue screen Side panel Back Watch TV o Press lt or gt to select On or Off Blue screen When Blue screen is selected the screen will turn blue and the sound will be muted when no signal is received In the FUNCTION menu press W to highlight Blue screen Auto Panel look o Side panel Back Watch TV o Press lt or gt to select On or Off 25
21. eekly can be used to view a series of programmes PLEASE NOTE When a timed programme is about to Press MENU and lt or P to select the TIMER start an information screen will appear offering the option MENU of watching or cancelling the programme The menus and other channels will not be available during the timed 6 programme unless the programme timer is cancelled TIMER MENU Sleep timer Programme Timers lt gt OK J The television can be set to turn itself off after a certain time 1 Press MENU and lt or gt to select the TIMER menu MENU F an EXIT Aer ad Sleep timer Press W to select Programme Timers then press OK to select Press W to select the first programme to be timed then press OK The SET TIMER menu will now appear on screen O Press A and W to go through the list adding the details of the programme to be timed by using the number buttons and lt and gt to make Watch TV selections 2 Press W to select the Sleep timer Use the 11 36 Mon 11 Dec number buttons to set the required time For example to switch the television off in one and a SEVER half hours enter 01 30 or press lt or gt to Programme Channel 4 1 increase decrease in steps of 10 minutes Date Mon 11 Dec 2006 11 12 EP Pes EXIT to finish End Time 12 30 Audio Language OB 9 E ae E MENU KETA 26 Digital on screen information and Programme Gu
22. erface is for use with a DVD decoder or electrical equipment with digital audio and video output scrub COMMON INTERFACE DTV MODE ONLY The Common Interface is for a Conditional Access Module CAM Contact a service provider It is designed for best performance with 1080i and 1080p high definition video signals but will also accept and display 480i 480p 576i 576p and 720p signals NOTE For 1080p it is recommended that approved HDMI cable up to 5m long is used If the unit has DVI output a special conversion cable from DVI to HDMI will be required PLEASE NOTE Although this television is able to connect to HDMI equipment it is possible that some equipment may not operate correctly A wide variety of external equipment can be connected to the back of the television therefore the relevant owners manuals for all additional equipment must be referred to We recommend SCART 1 for a decoder and SCART 2 for a media recorder If connecting S VIDEO equipment set the INPUT for EXT2 See page 33 If the television automatically switches over to monitor external equipment return to normal television by pressing the desired programme position button To recall external equipment press to select between DTV EXT1 EXT2 EXT3C HDMI1 HDMIZ2 PC or ATV HDMI the HDMI logo and High Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC English Connecting a computer Before c
23. es be achieved The colour is factory set to Auto to automatically display the best colour system To check that you have the best colour 1 With the external source playing select Manual setting from the SET UP menu Colour system Auto A VCR LOK Store MENU F EA Watch TV With A or Y choose between Auto PAL SECAM NTSC 4 43 or 3 58 Why doesn t the video DVD being played show on screen Make sure the VCR or DVD player is connected to the television as shown on page 7 then select the correct input by pressing Q Why is there a good video picture but no sound A Check all lead connections Q Why is there a picture but no sound Check the volume has not been turned down or that sound mute has not been selected Why is the VCR DVD picture in black and white Check the correct input has been chosen S VIDEO or AV See AV connections page 33 Why is there picture and sound interference on all digital and analogue channels The signal strength may be too strong Set the Antenna Amplifier option in the SET UP menu to Off Q What else can cause a poor analogue picture A Interference or a weak signal Try a different television station Manual fine tuning may help 1 Select the Manual tuning menu Highlight the station and press OK then press gt to select Manual fine tuning 2 Using A or V adjust to get the best picture and sound Press OK and then EXIT Manual tuning Manual f
24. et This specifies the type of signal going into SCART 2 EXT2 on the back of the television Please refer to the manufacturers instructions for the connected equipment Alternatively press the external source selection button until the picture from connected equipment is shown This button must be used to view equipment connected using the COMPONENT VIDEO INPUT EXT3C inthe SET UP menu press Y until AV connection is highlighted then press OK An S in the display e g 2S EXT 2S indicates the input is set for an S Video signal Input selection Language At any time by pressing a list will appear on ausam screen showing modes and all stored external equipment Use V and A to highlight and OK to Manual tuning Antenna Amplifier select AV connection Back Watch TV PC eT POO HDMI HDMI 2 With lt or gt select either AV or S VIDEO as the HomM O DMD reg ired inpr for EXT2 3C 3c O2 oO O2 OO AV connection for ameme HDMI1 audio NOTE When in digital mode ATV cannot be selected in analogue mode DTV cannot be selected To switch between DTV and ATV press the A D button Watch TV HDMI displays equipment connected to Input HDMI on the back of the television It is designed for best performance with 1080i high definition signals If the colour is missing try the alternative setting PC displays a computer connected to Input RGB PC on the back of the television
25. gue sound HDMI2 is digital sound only Certain formats of DVD disk may not output from this TV 32 44 1 48kHz and 16 20 24 bits are acceptable Analogue switch off This is a digital television which is integrated to allow the use of both digital and analogue services However during the lifetime of this set it is very likely that analogue services will be switched off to allow for more new digital services This switch off will happen in a number of phases which will be advertised in your area well in advance It is recommended that at each phase the television is re tuned to ensure that existing and new digital services can be viewed without disruption see the Auto tuning section Analogue text services setting up general information Auto and LIST modes This television has a multi page text memory which takes a few moments to load It offers two Modes of viewing text Auto will display Fastext if available LIST will store your four favourite pages Selecting modes The text character set will be automatically chosen by the language setting in the SET UP menu 1 Select Teletext from the FUNCTION menu 2 With lt 4 or gt choose Auto or LIST then press EXIT FUNCTION Teletext 4 Auto gt Panel lock off Auto format On 4 3 stretch off Blue screen On Side panel 1 MENU GD Watch TV Text information The 68 0 button To view text services press amp C4 C Press again to superimpose
26. h TV Clock phase The Clock phase matches the PC signal with the LCD display Adjusting this can clear horizontal stripes and picture blur In the SET UP menu press W until PC Setting is highlighted Press OK to select then W to highlight Clock phase Use lt or gt to adjust until the picture clears 32 PC settings picture position clock phase sampling clock reset Sampling clock Adjusting the Sampling clock alters the number of pulses per scan this will clear vertical lines on the screen In the SET UP menu press V until PC Setting is highlighted Press OK to select then V to highlight Sampling clock PC Settings Horizontal position Horizontal width Vertical position Vertical height Clock phase Sampling clock gt Back Watch TV Use lt or gt to adjust until the picture clears Reset To return to the original factory settings In the SET UP menu press Y until PC Setting is highlighted Press OK to select then V to highlight Reset Press OK NOTE When a PC is connected using HDMI none of these functions will be available Input selection and AV connections Defining the INPUT and OUTPUT sockets so that the television recognises connected equipment See page 7 for a clear view of the back connection recommendations Most media recorders and decoders send a signal through the SCART lead to switch the television to the INPUT signal selection correct Input sock
27. ide When viewing in digital mode the on screen information and programme guide give access to programme details for all available channels Information Select information by pressing i the information screen will appear giving details of the channel and programme currently being viewed ALL PROGS Channel4 In ca EGAN ITv2 That s What She Said Hank in uncomfortable with his BBC THREE new colleague s innuendo and Dale tries to give up Sree g also ITV Playalong in 4 minutes on ITV Play CCEE EXIT Accum aa TV FAV ROEE Page Up E ShowingAlso Languages To see details of any of the other channels currently available press A and W to scroll up and down the channel list As the channel is selected details of the programme currently being broadcast will appear Pressing the YELLOW button will activate Showing also giving details of programmes which have started on other channels To record the following programme with the information guide showing press The Tune option in the bottom section of the screen will change to Record press OK The SET TIMER screen will appear t 11 36 Mon 11 Dec News at Noon 004 Channel 4 12 00 12 30 Mon 11 Dec SET TIMER Repeat Auto start VCR Subtitles Audio Language ENGLISH Q Enter Number Save Timer ZX Cancel The details of the programme will have been added to the screen Press OK to save 27 Guide Select
28. igital audio output socket providing it is Interface Slot following the instructions provided being broadcast It will automatically mute the speakers with the CAM A box will appear on screen to confirm that the CAM is loaded 1 In the LOCAL OPTIONS menu press V to select Audio output 2 In the FEATURE MENU press A or W to select Common Interface Slots 2 Use lt d or P to select PCM or Bitstream Details of the CAM should now be available Use OK to select it If two CAMs are inserted use lt or P to select between the two 30 Digital settings oninuei software upgrade Version Searching for new software This feature can be used to check the version of software If preferred software upgrades can be searched for currently installed manually using Search for New Software 1 From the FEATURE MENU press A or W to select 1 In the SOFTWARE UPGRADE menu press A or Software upgrade Press OK Y to select Search for New Software SOFTWARE UPGRADE FEATURE MENU Auto upgrade OFF Favourite and Locked Programmes Search for New Software lt gt OK Favourites ALL PROGS S MENU EXIT A Common Interface Slots NO MODULE Software Upgrade c OK ee 2 Press OK The television will automatically start EnciyptediErogianmes searching for a software upgrade the progress bar CED Back Gp Watch TV will move along the line SEARCHING FOR NEW SOFTWARE Press A or W to se
29. ine tuning sty HEARACH Store MENU J l Watch TV Why don t the controls on the front of the television work A Check that Panel lock is not ON Q Why doesn t the remote control work Check the side switch on the remote control is in TV mode Check the batteries aren t dead or inserted incorrectly Why is there a message permanently on the screen A Remove it by pressing G Q Why is the DTV main menu unavailable A Another mode is selected Press A D to select DTV Q Why are some of the menus locked Lock Menu has been enabled see Parental Controls page Q Why is the digital channel locked A The channel has been selected in Locked Programmes see Digital Settings section Why can only certain digital channels be viewed A A Favourite list has been selected see Favourite Programmes section set the feature to ALL PROGS or change channels by using the number buttons Why are some of the digital subscription channels unavailable A Your subscription needs upgrading Contact your service provider Why is the soundtrack in English when a different audio language has been selected A The programme is currently being broadcast with an English soundtrack only Why is there incorrect or no sound when in DTV mode Press OD I II to check if the hard of hearing option has been selected Why is there no sound from my connected sound equipment Check the Speaker option in
30. into the television s memory To view these pages press the relevant coloured buttons To change these stored pages press the relevant coloured button and enter the 3 digit number This number will change in the top left of the screen and in the coloured highlight Press OK to store The bars at the bottom of the screen will flash white Whenever OK is pressed all four page numbers showing at the bottom will be stored and the previous ones will be lost If OK is not pressed the selection will be forgotten when text is cancelled Other pages may be viewed by entering the 3 digit page number but DO NOT press OK or these pages will be stored English Analogue text services control buttons Digital interactive services Below is a guide to the functions of the remote control text buttons To display the index initial page Press Ei to access the index initial page The one displayed is dependant on the broadcaster S O T display a page of text Press O to display text Press again to superimpose text over a normal normal broadcast picture Press again to return to normal television viewing Programmes cannot be changed until this has been done For use with PW and P w to view sub pages when available To access sub pages To reveal concealed text To discover the solutions on quiz and joke pages press the button At times it is convenient to hold a page of text Press and will appea
31. ions This equipment has been designed and manufactured to meet international safety standards but like any electrical equipment care must be taken to obtain the best results and for safety to be assured Please read the points below for your own safety They are of a general nature intended to help with all electronic consumer products and some points may not apply to the goods you have just purchased Air Circulation Leave more than 10cm clearance around the television to allow adequate ventilation This will prevent overheating and possible damage to the television Dusty places should also be avoided Heat Damage Damage may occur if the television is left in direct sunlight or near a heater Avoid places subject to extremely high temperatures or humidity Place in a location where the temperature remains between 5 C 41 F min and 35 C 94 F max Mains Supply The mains supply required for this equipment is 220 240v AC 50 60Hz Never connect to a DC supply or any other power source DO ensure that the television is not standing on the mains lead DO NOT cut off the mains plug from this equipment this incorporates a special Radio Interference Filter the removal of which will impair its performance IF IN DOUBT PLEASE CONSULT A COMPETENT ELECTRICIAN Do DO read the operating instructions before you attempt to use the equipment DO ensure that all electrical connections including the mains plug extension leads a
32. ision to complete the search When the search is complete the television will automatically select programme position 1 and the Manual tuning screen will appear 13 Manual tuning C22 BBC1 C28 BBC2 Select Sort Back Watch TV Use V or A to move through the list to select a programme then press EXIT to view The station order may be changed using the Manual tuning screen see the analogue Sorting programme positions section English Analogue manual tune The television can be tuned in manually using Manual tuning For example if the television cannot be connected to a media recorder decoder with a SCART lead or to tune in a station on another System Use lt 4 and gt to move across the screen and select any of these Manual Tune options D Programme System Colour Programme Channel Search Manual fine Station system skip tuning Programme The number to be pressed on the remote control System Specific to certain areas Colour system Factory set to Auto should only be changed if problems are experienced i e NTSC input from external source Programme skip _ means nothing has been stored or the facility to skip the channel is ON See page 76 Channel The channel number on which a station is being broadcast Search Search up and down for a signal Manual fine tuning Only used if interference weak signal is experienced See page 37 Station Station identification Use the A or V and lt
33. ividual colours to suit personal preference This can be useful when using an external source In the PICTURE menu press to select Base colour adjustment then press OK Picture settings 3D Colour management Base colour adjustment Active Backlight Control Watch TV Press A and W to select an option then to adjust the settings Base colour adjustment Watch TV To return to the original factory settings select Reset and press OK English Active Backlight Control When Active Backlight Control is activated it will automatically optimise the backlighting levels for dark scenes 1 In the PICTURE menu press W to select Active Backlight Control Picture settings 3D Colour management Base colour adjustment Active Backlight Control 4 On Cinema mode aac a Watch TV 2 Press lt or gt to select On or Off Cinema mode If there are lines or jagged edges in the film or programme being viewed selecting Cinema mode can help correct this by smoothing out the picture 1 In the PICTURE menu press W to select Cinema mode Picture settings OKJ 3D Colour management Base colour adjustment Active Backlight Control C o Cinema mode Oo o Watch TV 2 Press lt or gt to select On or Off NOTE When a DVD with subtitles is being played this mode may not work correctly 24 Picture controls lt ontinvea Antenna amplifier If the signal being received by th
34. l sides of the screen by zooming in and selecting the image without distortion o TE When subtitles are included on a SUBTITL E letterbox format broadcast this setting will raise the picture to ensure that all the text is displayed 19 English Widescreen viewing coninved 14 9 Use this setting when watching a 14 9 a broadcast Use this setting when watching a widescreen DVD widescreen video g tape or a 16 9 broadcast WIDE when available Due to the range of widescreen formats 16 9 14 9 20 9 etc black bars may be visible on the top and bottom of the screen Use this setting to view a true 4 3 broadcast O This option is only k perenne available when watching a 1080 source Use this setting when watching a EXACT SCAN 1080 source it will display the image as transmitted without scaling or cropping the picture nin gt O gt HDMI this setting will show the picture without over scan i e WYSIWYG Press the amp button and a list of all the widescreen formats will appear on screen Use A and to highlight the required format and OK to select Pc When a PC is connected via HDMI it will be selectable in the widescreen format list Wide Super Live 1 Using the special functions to change the size of the displayed image i e changing the height width ratio for the purposes of public display or commercial gain may infringe on copyright laws 20 Picture controls
35. lect Version Use lt or P to select When the software has been updated there Searching for a new software upgrade for will be a choice of two versions available this TV Searching c u SOFTWARE UPGRADE Version Auto upgrade If an upgrade is found the television will Search for New Software OK automatically start downloading if not a screen will appear stating that an upgrade is unavailable MENU J E Watch TV NO UPGRADE AVAILABLE There is no upgrade available at Auto Upgrade this time If Auto upgrade is selected the software will automatically update as each version becomes available provided the television is on or in standby If the television is on a screen prompt will appear showing the software download taking place 1 In the SOFTWARE UPGRADE menu press A or Y to select Auto upgrade o Use lt d or gt to select ON or OFF 31 English Picture position Connect the PC as shown in the Connecting a PC section and ensure that a picture is showing on the television screen The picture position may now be adjusted to suit personal preference Press to select PC then select PC Setting from the SET UP menu Language AV connection PC Setting Watch TV Press OK Press A and W to select an option then lt or to adjust the settings PC Settings Horizontal position 4 Vertical position Vertical height Clock phase Sampling clock Back Watc
36. n active Super Woofer is connected to the Woofer Out connection on the back of the television select AV connection in the SET UP menu press V to highlight Woofer and using lt or gt select External See Input Selection and AV Connections section SRS WOW sound effects SRS WOW is a suite of audio effects which use the stereo signals being broadcast to produce enhanced sound from the television s speakers If mono sound is broadcast only TruBass will be available SRS 3D gives a rich sound experience FOCUS concentrates the sound and gives the effect of it coming from the centre of the television TruBass enhances the lower bass frequencies D Press MENU and select the SOUND menu 2 Use A or Y to highlight WOW then press OK SRSC WOW SRS and symbol are trademarks of SRS Labs Inc SO WOW technology is incorporated under license from SRS Labs Inc 18 TruBass Watch TV Press W to highlight SRS 3D and using lt or P select between On or Off Then press W to highlight FOCUS and press lt or P to select between On or Off Highlight TruBass and use lt or P to select Off Low or High to suit your preference NOTE This feature is not available through headphones Dual analogue only If a programme or film is being broadcast with a soundtrack in more than one language the DUAL feature allows selection between them o Select the SOUND menu Use W to highlight Dual then press lt or P
37. nd inter connections between pieces of equipment are properly made and in accordance with the manufacturers instructions Switch off and withdraw the mains plug before making or changing connections DO consult your dealer if you are ever in doubt about the installation operation or safety of your equipment DO be careful with glass panels or doors on equipment DO NOT REMOVE ANY FIXED COVERS AS THIS WILL EXPOSE DANGEROUS AND LIVE PARTS THE MAINS PLUG IS USED AS A DISCONNECTING DEVICE AND THEREFORE SHOULD BE READILY OPERABLE Do not DO NOT obstruct the ventilation openings of the equipment with items such as newspapers tablecloths curtains etc Overheating will cause damage and shorten the life of the equipment DO NOT allow electrical equipment to be exposed to dripping or splashing or objects filled with liquids such as vases to be placed on the equipment DO NOT place hot objects or naked flame sources such as lighted candles or nightlights on or close to equipment High temperatures can melt plastic and lead to fires DO NOT use makeshift stands and NEVER fix legs with wood screws To ensure complete safety always fit the manufacturers approved stand bracket or legs with the fixings provided according to the instructions DO NOT leave equipment switched on when it is unattended unless it is specifically stated that it is designed for unattended operation or has a standby mode Switch off by
38. nes Q Why are there no analogue text sub pages There are none broadcast or they have not yet loaded Press the E9 button to access See text section Why are the four coloured text numbers visible but no text A Text has been selected whilst viewing an external source i e DVD or VCR No text will appear on screen or a box may appear stating no information is available Select a broadcasting channel and press D to access Why does the GREEN Active Standby LED sometimes take longer to go out When put into standby the television s active standby will automatically search all available channels for downloads provided Auto upgrade is On The time it takes to do this may vary Cleaning the screen and cabinet Why are the colours wrong when an NTSC source is played Connect the source via a SCART lead and play Select Manual setting from the SET UP menu Manual setting a vomnnns Watch TV Set the Colour to Auto and exit Go to the Picture settings menu and adjust the tint Why is there no sound from a PC connected via HDMI AV connection PC HDMI audio m e HDM audio Co ome gt ET output o A ETE input o M LS O86 Watch TV Press and hold the OK button for 5 seconds the Lip Sync Latency menu will appear Select between On and Off Lip Syne Latency one Turn off the power clean the screen and cabinet with a soft dry cloth We recommend that you do not
39. o select Options Subtitles 2 Press OK then press A or W to highlight Audio 2 Use lt q or to select an option Language LOCAL OPTIONS Reset TV Country Luk Selecting Reset TV will delete all stored digital channels and settings The television will return to factory settings Audio Language ENGLISH 2 and then auto tune Subtitles 1 In the SETUP MENU press V until Reset TV is 7 7 highlighted Local Time Settings MENU J F Watch TV 2 Press OK to select A screen will appear warning that all digital settings will be lost press OK to continue 3 Use lt or gt to select an option i The Welcome screen will appear press OK to NOTE If more than one soundtrack is available continue the television will then auto tune use OOI II to select between them Common interface Audio output The Common Interface Slot situated on the back of the When connecting a surround sound amplifier to the digital television enables the insertion of a CAM Conditional audio output Sony Philips Digital Interface Format Access Module and card These are purchased from a S PDIF the following options can be selected service provider and allow additional subscription broadcasts to be viewed For information see a PCM this mode outputs PCM format to the digital service provider audio output socket BITSTREAM this mode outputs audio format eg Dolby 1 Insert the CAM and card into the Common Digital to the d
40. onnecting any external equipment turn off all main power switches If there is no switch remove the mains plug from the wall socket the back of your television R PCIHDMIt 7 AUDIO Audio cable for PC to television connection not supplied xA Computer Conversion adaptor if required not supplied Connect the PC cable from the computer to the PC terminal on the back of the television Connect the audio cable to the PC HDMI1 Audio socket on the back of the television Select PC from the PC HDMI1 audio options in the AV connection menu located in the SET UP menu Press the to select PC mode PLEASE NOTE Some PC models cannot be connected to this television An adaptor is not needed for computers with a DOS V compatible mini D sub 15 pin terminal A band may appear at the edges of the screen or parts of the picture may be obscured This is due to scaling of the picture by the set it is not a malfunction When PC input mode is selected some of the television s features will be unavailable e g Manual setting in the SET UP menu Colour Tint DNR and Black Stretch in the Picture settings menu oa aul crew t w IN W amp ORGE PC Mini D sub 15 pin connector lt RGB PC cable not supplied The following signals can be displayed VGA
41. or gt buttons to enter up to seven characters L I To allocate a programme position on the television for a decoder and media recorder turn the decoder on insert a pre recorded film in the media recorder and press PLAY then manually tune D Press MENU and using lt or gt select the SET UP Press OK to select If the programme is skipped menu with V highlight Manual tuning press Programme skip must be removed before OK to select storing k D DOOODOOCooo Language Speed Watch TV Country Auto tuning O Press to select System and use A or V to Manual tuning change if required Antenna Amplifier O Then press to select Search Back Watch TV O Press A or W to begin the search The search symbol will flash 2 Use A or to highlight the programme position required e g we suggest Prog 0 for a media Manual tuning recorder DOOCMEOCIoo 3 Store Back Watch TV Manual tuning Different Each signal will show on the television if it is not Channel your media recorder press or Y again to numbers restart the search may be displayed Select Back Watch TV 14 Analogue manual tune lt oninuea Auto tune When your media recorder signal is found press gt to move along to Station With A V lt and gt put in the required characters e g VCR Manual tuning DOOODMOOCTooo Store Back Watch TV Press OK to store Repeat for each programme position you want to tune or
42. ots This is not a sign of a malfunction Side View Top View Make sure the television is located in a position where it cannot be pushed or hit by objects as pressure will break or damage the screen and that small items cannot be inserted into slots or openings in the case Please take note EXCLUSION CLAUSE Toshiba shall under no circumstances be liable for loss and or damage to the product caused by i fire ii earthquake iii accidental damage iv intentional misuse of the product v use of the product in improper conditions vi loss and or damage caused to the product whilst in the possession of a third party vii any damage or loss caused as a result of the owner s failure and or neglect to follow the instructions set out in the owner s manual viii any loss or damage caused directly as a result of misuse or malfunction of the product when used simultaneously with associated equipment Furthermore under no circumstances shall Toshiba be liable for any consequential loss and or damage including but not limited to the following loss of profit interruption of business the loss of recorded data whether caused during normal operation or misuse of the product NOTE A Toshiba wall bracket or stand where available must be used If a non Toshiba wall bracket or stand is used the product s BEAB approval will become void and the equipment is then used at the consumers own risk If stationary images generated by text
43. ou want to move and press gt The selected station will be moved to the right of the screen Manual tuning C22 BBC1 C28 BBC2 C69 Store Back Watch TV Use V or A to move through the list to your preferred position As you do so the other stations will move to make room Press lt q to store your move Repeat as necessary then press EXIT General controls stereo bilingual transmissions time display sound controls Selecting programme positions To select a programme position use the numbered buttons on the remote control Programme positions can also be selected using PA and Py To revert to the previous programme position press 2 To display on screen information i e programme position channels or stereo mono signal press i Press again to cancel Stereo and Bilingual transmissions If stereo or dual language broadcasts are transmitted the word Stereo or Dual will appear on the screen each time programme positions are changed disappearing after a few seconds If the broadcast is not in stereo the word Mono will appear Stereo Press CD I II to select Stereo or Mono Bilingual Bilingual transmissions are rare If they are transmitted the word Dual will display Choose the required programme number and if the word Dual appears press CD I II to select Dual 1 Dual 2 or Mono The Time Display analogue only The time display facility allows the current text service time to be seen
44. put the television into Standby press on the remote control the GREEN active standby LED will appear see Software Upgrade section next to the RED for a few moments then disappear To view the television press C again The picture may take a few seconds to appear Using the remote control Press the MENU button on the remote control to see the menus In digital mode the menu bar at the top of the screens will show three different topics shown in symbols As each symbol is selected by pressing the lt or button on the remote control its respective options will appear below In analogue mode the menu appears as a list of five topics As each symbol is selected by pressing the lt or gt button on the remote control its respective options will appear below er NS INPUT 3 OAL BIOS Aupio EXT3 8 To use the options press the A and W button on the remote control to move up and down through them and OK lt or gt to select the required choice Follow the on screen instructions The functions of each menu are described in detail throughout the manual Using the controls and connections To alter the volume press lt 1 To alter the programme position press W A Press MENU and gt or A to control the sound and picture options Press MENU twice to finish When connecting sound equipment to EXT3 connect the audio output of the equipment to the phono sockets on
45. r in the top left of the screen The page will be held on screen until the button is pressed again Press Et once to enlarge the top half of the page press again to enlarge the bottom half of the page Press again to revert to normal size To hold a wanted page To enlarge the text display size 36 To select a page whilst viewing a normal picture X Enter the page number then press 9 a normal picture will be displayed The television will indicate when the page is present by displaying the page number at the top of the screen Press amp C4 C to view the page To display news flashes Select the news flash page for the chosen text service see the index page of text service Press The news flashes will be displayed as and when they are broadcast Press again to cancel the display The news flash page must be cancelled before changing programmes Remember to cancel text before changing channel S press th V O button twice Questions ana Answers Below are the answers to some of the most common queries For more information go to www toshiba co uk Q Why is there no sound or picture Check the television is not in standby mode Check the mains plug and all mains connections There is a picture but why is there little or no colour When using an external source for instance a poor quality video tape if there is little or no colour improvements may sometim
46. r picture so the station order can be changed see Sorting programme positions section English Analogue programme skip sorting programme positions Programme skip To prevent certain programmes from being viewed the programme position can be skipped The remote control must be removed as the channels will still be available using the number buttons Programmes can then be watched as normal using the controls on the television but the television will not show the skipped programme position 1 Select Manual tuning from the SET UP menu Manual tuning Use A or W to highlight the programme position to be skipped and press OK to select Press to select Programme skip Use A or W to turn Programme skip on Press OK N on the screen indicates a skipped programme position Manual tuning OOOBDOOCIoo Store Back Watch TV Press MENU and repeat from Step 2 or press EXIT Each programme position has to be individually selected To turn Programme skip off repeat the procedure for each position Skipped programme positions cannot be selected by PA and P w or by the controls on the television but can still be accessed by the number buttons on the remote control 16 Sorting programme positions Channels may be moved and stored on the programme position of your choice Select Manual tuning from the SET UP menu With the list of stations now showing use W or A to highlight the station y
47. s menu press W to select Backlight Press lt or to adjust Picture settings 1 2 Backlight w o Brightness Sharpness Back Watch TV Picture controls coniinued c lt 2 lt Lu Picture preferences MPEG NR Noise Reduction This television offers the choice of personalising the picture When watching a DVD the compression may cause some style Press AWK to view the different styles available words or picture elements to become distorted or pixelated Using the MPEG NR feature reduces this effect by Picture mode 1 to 3 are preset options and effect many smoothing out the edges features settings within the television Picture mode M stores your own settings as detailed below o Select MPEG NR from the Picture settings menu 1 Select Picture settings from the PICTURE menu Picture settings Picture settings 1 2 Black stretch Backlight Contrast Brightness Colour Temperature Tint Sharpness Watch TV Back Watch TV i Use lt q or P gt to select a setting to suit your 2 Use lt or gt to adjust the Contrast Brightness 2 preference k Colour Tint and Sharpness DNR Digital Noise Reduction Black stretch DNR enables you to soften the screen representation of a weak signal to reduce the noise effect Black Stretch increases the strength of dark areas of the picture which improves the definition 1 Select DNR from the Picture settings menu 1 In the Picture se
48. services channel identification logos computer displays video games on screen menus etc are left on the television screen for any length of time they could become conspicuous it is always advisable to reduce both the brightness and contrast settings English The remote control Simple at a glance reference of your remote control To select mode Number buttons To return to the previous programme To switch between ATV analogue television and DTV digital television To alter the volume On screen Menus To display the digital on screen Programme Guide Text control buttons Selectable picture preferences Widescreen viewing DVD MENU aa MENU TOP MENU SET Up gt GUIDE C CHE For On Standby mode To select input from external sources To change programme positions and text pages To mute the sound To exit Menus When using menus the arrows move the cursor on the screen up down left or right OK to confirm your selection To switch between TV Radio and Favourite programmes when in digital mode To display digital on screen information To call up text services in analogue mode When in TV mode When using a TOSHIBA VCR or DVD SUBTITLE CDI II UML press II II to PAUSE STEP Sil picture k ress gt to PLAY OOM Stereo bilingual transmissions Pi summe Digital Subtitles press Aio REWIND Time display press gt gt to FAST FORWARD When using the Programme Guide press
49. tal control In order to prevent viewing of unsuitable films and programmes channels and menus can be locked These can then only be accessed with a security code PIN when in digital mode Setting the PIN 1 Press MENU and P to select the FEATURE MENU i FEATURE MENU Parental Control 0K MENU J F Watch TV 2 Use W to select Parental Control then press OK Press W to highlight Change Pin then press OK PARENTAL CONTROL Mode an ON Change PIN OK C MENU EU ER EXIT Vey Cons Using the number buttons enter a four digit number when these have been entered the screen will ask you to confirm them by entering them again DEFINE PIN NUMBER Mew PIN Confirm PIN Q Enter PIN Exit The PIN number is now set To activate put the television into standby 28 Mode This feature locks various menus to prevent the television being retuned or the settings being overridden 1 In the PARENTAL CONTROL menu press Y to select Mode PARENTAL CONTROL Mode On Change Pin e OK MENU A S EXIT AVERA Use lt or gt to choose between ON LOCK MENU LOCK INSTALL and OFF When menus that have been locked are now selected they will only become available when the PIN is entered Digital settings favourite programmes locked programmes encrypted programmes Selecting favourite programmes Favourite Programmes creates
50. the Sound menu is set to Off 38 Questions ana Answers conned What can be done if the PIN number has been forgotten Use the Master PIN code of 1276 then change to a number of your choice Ensure that no one else can use the Master PIN by removing the Owner s Manual Why are there vertical stripes on the screen when in PC mode A The Sampling clock may need adjustment Select PC Setting from the SET UP menu highlight Sampling clock and adjust until the lines clear Why are there horizontal stripes and or blurred images on the screen when in PC mode A The Clock phase may need adjustment Select PC Setting from the SET UP menu highlight Clock phase and adjust until the picture clears Why when digital subtitles have been selected are they not showing on screen Subtitles are not currently being transmitted by the broadcaster Q Why is there no digital text service The digital programme being viewed is not broadcasting digital text Try another digital programme Q Why are there problems with analogue text Good performance of text depends on a good strong broadcast signal This normally requires a roof or loft aerial If the text is unreadable or garbled check the aerial Go to the main index page of the text service and look for the User Guide This will explain the basic operation of text in some detail If further information is needed on how to use text see the text section Questions ana Answers oni
51. the on screen guide by pressing GUIDE the guide screen will appear highlighting details of the channel and programme currently being viewed This may take a few moments to appear Monday 11 00 11 30 12 00 BBC ONE My Life For Sale BBC TWO ISchools _ sch ITV1 This Morning fanessa s Channel 4 CS CO oa leadland Five Trisha Godd Five News Brainteas a ALL PROGS RA The Montel Will f Judge Jud BBC THREE This is BBC THREE BBC FOUR Tvs Ce Ce CD SKY THREE Tunisia Egypt UKTV History The Re Inventors More CS COT ELE v Watch Page Up RT on EXIT ANECIA TV FAV KOE E Page Down Timers Press lt q or gt for information of other programmes scheduled for the channel selected For details of other channels currently available press A and to scroll up and down the channel list As the channel is selected details of the programme currently being broadcast will appear then press lt or gt For information on a highlighted programme press i To set the timer for that programme press the BLUE button to bring up the Programme timers menu NOTE Recording can be set from both the information screen and guide In order for the recording operation to work the media recorder must be AV link compatible Press I gt to move the Guide forward by 24 hours press 44 to go back Pressing gt or lt 4 will move the Guide forwards or backwards a page at a time English Digital settings paren
52. the television To select the Input press until the display shows EXT3 as described on page 33 The television will automatically sense the type of signal Please always refer to the owner s manual of the equipment to be connected for full details Please note Inserting the headphone plug will mute the sound from all speakers Tuning Digital television for the first time Before switching on the television put your decoder and media recorder to Standby if they are connected and ensure the aerial is connected To set up the television use the buttons on the remote control as detailed on page 6 Press the Q button the LOCAL OPTIONS screen will appear This screen will appear the first time that the television is switched on and each time the television is reset LOCAL OPTIONS Country UK gt Language ENGLISH Audio Language ENGLISH Audio Output Subtitles Local Time Settings of Press V to highlight Country and lt or gt to select The television will now tune the stations for your country Using V highlight Language then lt or gt to select Press OK to start tuning The AUTO TUNING screen will appear and the television will start to search for available stations The progress bar will move along the line You must allow the television to complete the search AUTO TUNING Progress C Prog Name Type UHF Quality 70 EE 34 CoD 87 KZS m 21 ooR EXIT KOET
53. ttings menu press V until Black E i Stretch is highlighted Picture settings 2 2 Black stretch ea MPEGNR tow Picture settings Black stretch a Colour Temperature cc CMPEGNR tow PNR Atos yU Colour Temperature Watch TV Watch TV 2 Use lt or gt to adjust The differences may not always be noticeable for the best result use lower settings as picture quality can be lost if the setting Press lt q or to select between On and Off The is too high effect depends on the broadcast and is most noticeable on dark colours 22 Picture controls coniinuec Colour temperature Colour Temperature increases the warmth or coolness of a picture by increasing the red or blue tint In the Picture settings menu press W until Colour Temperature is highlighted Picture settings 2 2 week dw RA Coot gt Colour Temperature Watch TV Press lt q or gt to select between Normal Warm and Cool to suit your preference 3D Colour management When 3D Colour management is selected it allows the Base colour adjustment feature to become available In the PICTURE menu press W to select 3D Colour management Picture settings 3D Colour management On Base colour adjustment OK Active Backlight Control Cinema mode Watch TV D Press lt or gt to select On or Off 23 Base colour adjustment The Base colour adjustment feature allows the adjustment of ind
54. use any proprietary polishes or solvents on the screen or cabinet as this may cause damage Disposal The following information is only for EU member states The use of the symbol indicates that this product may not be treated as household waste By ensuring this product is disposed of correctly you will help prevent potential negative consequences for the environment and human health which could otherwise be caused by inappropriate waste handling of this product For more detailed information about recycling of this product please contact your local city office your household waste disposal service or the shop where you purchased the product Notes For your own records 40 Information Before connecting any external equipment turn off all main power switches If there is no switch remove the mains plug from the wall socket Connecting a computer Signal information for Mini D sub 15 pin connector Acceptable video signals through HDMI terminals Pin No Signal name Pin No Signal name 1 R 9 NC 2 G 10 Ground 3 B 11 NC 4 NC not connected 12 NC 5 NC 13 H sync 6 Ground 14 V sync 7 Ground 15 NC 8 Ground Pin assignment for RGB PC terminal Connecting a DVD STB via HDMI H Active V Active 1 P H Frequency kHz V Frequency Hz Pixel Frequency MHz 720 576 Prog 31 250 50 000 27 000 1280 720 37 500 50 0
55. withdrawing the plug make sure your family know how to do this Special arrangements may need to be made for people with disabilities DO NOT continue to operate the equipment if you are in any doubt about it working normally or it is damaged in any way switch off withdraw the mains plug and consult your dealer WARNING excessive sound pressure from earphones or headphones can cause hearing loss ABOVE ALL NEVER let anyone especially children push or hit the screen push anything into holes slots or any other openings in the case NEVER guess or take chances with electrical equipment of any kind it is better to be safe than sorry Installation and important information Where to install Locate the television away from direct sunlight and strong lights soft indirect lighting is recommended for comfortable viewing Use curtains or blinds to prevent direct sunlight Sturdy tie as short as possible falling on the screen Place on a sturdy platform the mounting surface should be flat and steady It must be secured to the wall with a sturdy tie using the clip on the back of the stand or secured to the platform using the fixing strap located underneath the table top stand this will prevent it from falling over The LCD display panels are manufactured using an extremely high level of precision technology however sometimes some parts of the screen may be missing picture elements or have luminous sp

Toshiba X3030 Flat Panel Television User Manual

Contents

Download Pdf Manuals

Related Search

Related Contents