Home

Toshiba e-STUDIO281c Copier User Manual

1. If your opt subdirectory does not have the rcutil tool you can still run it from the above locations The opt is the default location for the symbolic link where the rcutil program can be launched During installation this location can be specified to be a different location Please note the UI Link path in the setup installation program Printer List The program displays the Setup tab at start up rcutil initially displays the default settings read from the PPD configuration file The program then updates the GUI with the user defaults saved in the settings file 533rc in user s home directory if it exists Note The Motif libraries libXm may need to be installed in the system rcutil requires Motif to be installed on the system for optimal operation Settings file The 533rc settings file contains keywords and settings that were saved through the rcutil configuration program This file can also be created directly using a text editor This file must be saved in the user s home directory The entries in the file is in the format keyword option where keyword is the feature to be enabled or disabled and the option is one of the choices configurable for that feature The valid choices are either those defined in the configuration file or the standard options which are features that are not defined in the configuration file but are supported in the driver An example follows User s Guide 27 TOSHIBA e STUDIO
2. TOSHIBA e STUDIO28 35 45 Unix Printer Driver Motif 1 2 System Reguirement Details HP UX Motif 1 2 libraries libXm Needed to be installed in target system Solaris Motif 1 2 libraries libXm Needed to be installed in target system AIX Motif 1 2 libraries libXm Needed to be installed in target system Linux None No library is needed Motif 2 1 libraries are linked statically To determine which version of Motif is installed in your Unix or Linux system do the following system checks Check if the following files exist e usr include Xm ComboBox h e usr include Xm Notebook h e usr include Xm SpinB h If you have these files you have Motif 2 1 installed in your system If not check if the usr include Xm sub directory exists If so you have Motif 1 2 installed If Motif is not installed on HP UX SunOS Solaris or IBM AIX systems the driver may not be installed or run correctly You would need to install Motif first before being able to install the Unix driver For more information please refer to the install Installation Script section Obtaining the Installation Package The package is shipped as one compressed file toshiba1 2 tar Z or toshiba2 1 tar Z To uncompress the file use uncompress lt Zfile gt Then use tar to restore the files tar xvf lt tarfile gt Installed Files Platform Installation Destination Path HP UX usr local tsbprn Sun Solari
3. Asks whether to specify a different configuration program manpage path Default is No Specify configuration program manpage path y N Asks whether to name a configuration program manpage path or not Default is No This should never appear This is added as a precautionary measure only if the default printer port was not detected Specify configuration program manpage path Prompts for new configuration program manpage path Default UI Link Path Identifies the current default UI Link Path Change UI Link Path y N Asks whether to specify a different UI Link Path Default is No Specify UI Link Path y N Asks whether to name a UI Link Path or not Default is No This should never appear This is added as a precautionary measure only if the default printer port was not detected Specify UI Link Path Prompts for new Ul Link Path Default path for temporary files Identifies the current default path for temporary files Change path for temporary files y N Asks whether to specify a different path for temporary files Default is No Specify path for temporary files y N Asks whether to name a path for temporary files or not Default is No This should User s Guide 41 TOSHIBA e STUDIO28 35 45 Unix Printer Driver Message Description never appear This is added as a precautionary measure only if the default printer port was not detected
4. Print Queue Status printer pshakuba unknown state enabled since Oct 18 16 59 2002 available Printer pshakubafrhserv2 dest direct hakuba Queue no printable jobs in Set as default F Install User Interface setup program Er Delete Uninstall All Delete Uninstall All Exit Help Exit Hele Figure 2 General Tab Server Install Figure 3 General Tab Client Install e Print Queue O This is the name of the print queue to be created and associated with the Unix filter e Install Type O The print queue can be server default or client print queue Network Printer Network Server o On server install type Network Printer is the name of the remote printer device where the print jobs will be sent to On client install type Network Server is the name of the remote UNIX Linux server where the print jobs will be sent to le User s Guide 11 TOSHIBA e STUDIO28 35 45 Unix Printer Driver e Printer Port Remote Queue o On server install type Printer Port is the Fiery printer port on the remote printer device o On client install type Remote Queue is the server type print queue on the UNIX Linux Network Server o This is print by default e Remote Server OS o Shown on client type installation this specifies the type of operating system in the remote Network Server This is needed in an HP UX
5. User s Guide TOSHIBA e STUDIO28 35 45 Unix Printer Driver GUI Mode The following buttons allows user to interactively control the installation and un installation process e Install button This button starts the installation process This button is disabled until all required fields are filled in e Delete button This button deletes selected print queue in the list of installed print queues If there is no print queue available this button is disabled e Uninstall All button This button deletes all print queues in the list of installed print queues If there is no print queue available this button is disabled e Exit button This button terminates the installation program e Help button This shows the instructions on how to use the setup installation program The text displayed is taken from the Setup txt file that is included in the package Setup resource file The Setup resource file contains the settings that define the setup installation program Motif based user interface This file is needed to be in the same location as the setup installation program itself Putting it in a separate location could cause unexpected errors when running the installation program The Background color is set through this resource file If the Background setting is removed from or not set in the resource file the installation program is also capable of detecting which background color to use in two ways First it uses the utility xdpyinfo to detect
6. installation for enabling the client print queue e Install Manpage o This enables disables installation of the documentation man pages This also enables disables the manpage path fields in the Advanced tab e Set as default o This enables disables making the print queue the default print queue e Install User Interface setup program o This enables disables installation of the rcuti1 configuration program NOTE The user may opt not to install the rcutil on systems without graphics capability for instance if Motif is not supported Advanced Tab Setup Program Version 1 0 0276 ioj xj Introduction Printers New Printer Data Queues Destination UI Link General Advanced md Eril tros zS Driver Path usr local Client middle script Shfilter clnt CORE Manpage Path AU Morpogo Poth 7 UI Link Path Zot Temporary files path tmp Print Queue Status printer pshakuba unknoun state enabled since Oct 18 16 59 2002 available Printer pshakuba rhserv2 dest directGhakuba Queue no printable jobs in kii Del Delete Uninstall All Figure 4 Advanced tab e Enable three digit request number o This is for HP UX client type installation only This specifies whether to use or not use the lpadmin option ob3 when creating the client print queue in the HP UX system We have observed that sometimes ob3 is required to enable printing in a
7. or client In Un install mode if lt insttype gt is a11 this un installs all print gueues All other values would un install lt gueue gt ifitis specified This is not all not set and not used by default Tells whether to run in Graphical mode or Text mode lt guitype gt can be either yes GUI default or no Text lt dval gt is for depth value Specifies the color depth to use to be able to formulate the background color when running in GUI mode lt dval gt can be no or any numeric value Non digit values are treated as no no tells the program to use system default colors for displaying the user interface This cdepth parameter is relevant ONLY if the Background color setting is removed or commented out in the Setup resource file This is unused if Background color setting is in the resource file The parameters can be specified in any order In text mode if a lt gueue gt or lt server gt is not specified in the command line parameter the program will prompt for it Example Usage install g pshakuba s hakuba p direct where pshakuba is the desired print queue name hakuba is the network target printer and direct isthe Fiery direct port in the hakuba printer This opens the setup installation program in server install type and GUI mode install pshakuba will open the setup installation program in server install type and print Fiery port This opens in GUI mode The Network Printer field will be empty waiting
8. Specify path for temporary files Prompts for new path for temporary files OS of remote server to connect to 1 Sun SunOS Solaris 2 HP UX 3 IBM AIX 4 Red Hat Linux Default lt platformID gt Text mode menu for specifying the remote server operating system Choose Prompts for the ID of the remote server OS from the text mode menu above Enable three digit request numbers y N Asks whether to enable 3 digit request numbers in HP UX client installation types The default can be a Yes or No depending on default value of the 3 digit request numbers flag Default client middle script Identifies the current default client middle script Change client middle script y N Asks whether to specify a different client middle script Default is No Specify client middle script y N Asks whether to name a client middle script or not Default is No This should never appear This is added as a precautionary measure only if the default printer port was not detected Specify client middle script Prompts for new client middle script Default middle script Identifies the current default middle script Change middle script y N Asks whether to specify a different middle script Default is No Specify middle script y N Asks whether to name a middle script or not Default is No This should never appear This is added as a precautionary measure only if the de
9. additional overhead Running the rcutil GUI tool for Toshiba e STUDI045 Series Printer Driver For Unix The printer driver comes with a Motif implemented Graphical User Interface tool It is pre installed with the driver The default name is rcutil and the default location is opt fopt rcutil is a symbolic link to the rcutil in the actual printer driver installation location The actual installation location depends on the system described below HP UX etc lp interface model efi Solaris etc lp interfaces model efi AIX fusr spool model efi usr local tsbprn Figure 19 Help dialog The F533Readme txt file that is shipped with the driver contains the text displayed in the Help dialog The said file can be edited for further customization The Help dialog also displays the list of keywords and options supported in the driver optionsoff gt Optionstoff A Type Boolean Keyword Relay On OFF Default OFF Non native keyword variations relay gt Relayton relayon Relay on relayoff gt Relaytoff Type Boolean Keyword Text On OFF Default Off Non native keyword variations ascii gt Textion text gt Text on texton gt Text on textoff gt Texttoff Type Boolean Keyword Pesc On OFF Default OFF Non native keyword variations pesc gt Pescton pescon gt Pescton pescoff gt Pesctoff Type Pick One Keyword Orientation Portrait Landscape ReversePortrait ReverseLandscape De
10. any trademark or trade name which is likely to be similar to or confusing with that of Electronics For Imaging or any of its suppliers or take any other action which impairs or reduces the trademark rights of Electronics For Imaging or its suppliers The trademarks may only be used to identify printed output produced by the Coded Font Programs At the reasonable reguest of Electronics For Imaging you must supply samples of any Typeface identified with a trademark CONFIDENTIALITY You agree to hold the Software and Coded Font Programs in confidence disclosing the Software and Coded Font Programs only to authorized users having a need to use the Software and Coded Font Programs as permitted by this Agreement and to take all reasonable precautions to prevent disclosure to other parties REMEDIES Unauthorized use copying or disclosure of the Software Coded Font Programs Typefaces or Trademarks will result in automatic termination of this license and will make available to Electronics For Imaging other legal remedies LIMITED WARRANTY AND DISCLAIMER Electronics For Imaging warrants that for a period of ninety 90 days from the date of delivery to you the Software under normal use will perform without significant errors that make it unusable Electronics For Imaging s entire liability and your exclusive remedy under this warranty which is subject to you returning the controller GA 1040 for TOSHIBA e STUDIO28 35 45 to Electronics For Ima
11. for user to specify a target printer install pshakuba s hakuba g no will run the setup installation program in Text mode The pshakuba is the desired print queue name hakuba is the network target printer It will ask if the default print Fiery port will be used And if not it will prompt for a new value User s Guide TOSHIBA e STUDIO28 35 45 Unix Printer Driver install u t all g no runs the setup installation program in un install and text mode to un install all print gueues install pshakuba s hakuba p direct cdepth 8 Runs in GUI mode and initialize the print queue destination printer and port fields in the user interface If Background color setting is removed from the Setup resource file this will use the 8 bit color depth parameter to choose the background color for the user interface Notes on X_QueryColors In some systems with limited color support an X OueryColors runtime error may occur A message may be something like X error of failed request BadValue integer parameter out of range for operation Major opcode of failed request 91 X QueryColors Value in failed request 0x806a92 Serial number of failed request 141 Current Serial number in output stream 141 The value of failed request and serial numbers may differ This is a known problem in Solaris 8 for Intel platform and will be fixed in a future update If this occurs perform the installation by running the installation program in Text mode
12. newly installed print queue You may want to try the on or off case to check which setting enables printing If you still can t print please inform us o Please refer to the manpage of 1padmin for the use of ob3 option e Driver Path o For HPUX Solaris and AIX a model script or backend script is installed on the system on the directory specified by the Driver Path This location may be different from the default location for the driver files which is usr local tsbprn Or etc lp interfaces tsbprn in Solaris If the User s Guide 12 TOSHIBA e STUDIO28 35 45 Unix Printer Driver system reguires the scripts to be in a different location specify the new location in this field e Middle script Client script o This is for Linux installations only This is the name to give the actual script installed on the system By default this is shfilter ps tos for server install type and is shfilter clnt for client install type o For server installation type the label is Middle script For client installation type the label changes to Client script CORE Manpage Path o This specifies the system directory where the CORE filter manpage will be installed This is disabled if the Install Manpage field is not checked in the General tab e UI Manpage Path o This specifies the system directory where the rcutil manpage will be installed This is disabled if the Install Manpage field is not checked in the General tab e UI Link Path o The setup p
13. ofthe installation folder We recommend making a local copy of the installation folder It is important to run it where it is located For one it uses the Setup resource file for defining its Motif based user interface e If a print queue would be re installed uninstall it first before re installing to ensure that the driver is updated correctly The setup installation program provides the capability to un install print gueues e The rcutil interface was developed using Motif 1 2 Motif 2 1 and C programming language Except for Linux systems it is reguired that the Motif 2 1 or Motif 1 2 libraries be installed on the system where the setup installation program will be used and where rcutil will be installed For safety use the install script utility for installing as it performs initialization checks before launching the setup installation program e To launch the setup installation program in GUI mode the DISPLAY environment variable must be set The user must manually set this on the command line For example type DISPLAY host 0 0 on the command line host isthe name ofthe terminal where setup would be launched It can also be the IP address of the said terminal After assigning value to DISPLAY export the environment variable by typing export DISPLAY on the command line If setup cannot still launch in GUI mode you may need to add the terminal in the hosts file done by typing xhost host on the command line Please coordinate with y
14. t lt insttype gt g lt guitype gt cdepth lt dval gt To run setup directly use setup in the same syntax as setup uh q lt queue gt s lt server gt p lt portvalue gt t lt insttype gt g lt guitype gt cdepth lt dval gt If no parameter is specified this launches the setup installation program in graphical install mode Parameters that are enclosed in square brackets are optional User s Guide 7 TOSHIBA e STUDIO28 35 45 Unix Printer Driver h u g lt gueue gt s lt server gt p lt portvalue gt t lt insttype gt g lt guitype gt cdepth lt dval gt Prints the usage guide If no other parameter is specified the program will terminate Otherwise it will launch the installation program either in graphical or text mode depending on value of the g parameter Uninstalls the specified lt queue gt The name of the local print queue to be set up or uninstalled q is optional Any parameter without the tag is assumed to be a print gueue name Only the last lt gueue gt if there s more than one specified in the parameter will be used The destination network printer server The printer port in lt server gt lt portvalue gt is the name ofthe printer port This is print by default Identifies the type of action on the print queue s In Install mode this implies installing of a server or client print gueue lt insttype gt can be either server default
15. the PCL6 Unix driver build Text mode text lt param gt CORE option only In PostScript print on text texton ascii text without interpreting it In non off textoff PostScript add CR for each LF This option allows the CORE driver to pass data to the printer without adding any extra commands Pesc mode pesc lt param gt Same as Text Command on pesc pescon off pescoff User s Guide 34 TOSHIBA e STUDIO28 35 45 Unix Printer Driver PPD Options Feature Keyword Option Non native form Description Rotate 180 userrotate180 lt param gt Sets User Rotate 180 Degrees On or Degrees 0 UserRotate1800 Off 1 UserRotate1801 Finishing finishing lt param gt Specifies the finishing option none finishingnone Needs a finishing device installed under sort finishingsort Options tab or the Finisher group finishinggroup keyword alternation finishingalternation stapleul finishingstapleul stapleur finishingstapleur staplel2 finishingstaplel2 staplet2 finishingstaplet2 saddle finishingsaddle Hole Punch punch lt param gt Selects the location of the hole punch none punchnone Needs a punch unit device installed left punchleft under Options tab or the PunchUnit top punchtop keyword Smoothing refine lt param gt Turns on or off the smoothing feature off refineoff type1 refinetype1 Pedestal Option pedestaloption lt param gt Specifies which pedestal option is none pedesta
16. the supported color depths in the system and adjusts the background color accordingly Second The cdepth parameter may also be specified in the command line is any numeric number used to detect the supported color depth in the system Some possible values are 1 2 4 6 8 12 16 24 and 32 User s Guide 10 TOSHIBA e STUDIO28 35 45 Unix Printer Driver Introduction Tab The Introduction tab shows information about the setup installation program Setup Program Version 1 0 0276 loal x Introduction Printers Unix Driver Installer Program Version 1 0 Installs the Unix Print Driver files Figure 1 Introduction tab General Tab Setup Program Version 1 0 0276 oi x Setup Program Version 1 0 0276 ioj xi Introduction Printers Introduction Printers New Printer Data Queues Destination UI Link New Printer Data Queues Destination UI Link General Advanced ct opt General Advanced E di Print Print Queue OJ Install Type A Server w Client Network Printer f Printer Port print 1 Install Manpage Install Type Remote Server 05 one Eam veas Network Server y v HP UX Renote Queue print Salk gt Linux J Install Manpage Print Queue Status 1 Set as default printer pshakuba unknoun state enabled since Oct 18 16 59 2002 F Install User Interf available de E arco Printer pshakubarhserv2 dest direct hakuba Queue no printable jobs in
17. 28 35 45 Unix Printer Driver System Default Profile for rcutil Number of characters per line is expected to be less than 256 variables have to be in uppercase values to be lowercase PageSize Ledger Destination Inner Orientation Reverse Portrait Duplex Long Finishing StapleUL Punch Left If this file exists in the user s home directory it is parsed and the values are reflected in the rcutil GUI controls or widgets In this version of the driver the settings file is unique in the user s home directory named as 533rc The user may have installed the driver in different Unix or Linux systems yet the user s home directory is the same Therefore all settings saved in one system will still be available in another system In order to avoid confusion the settings file may be deleted or its content deleted to allow the driver to reset to the default settings from the PPD configuration file The rcutil provides the capability to save settings to the settings file It can be used to create the settings file To do the actual printing use the 1p command to send the print documents to the printer During printing the settings file is parsed and the values passed to the CORE UNIX filter to apply the features in the print out The settings saved in the settings file will affect the actual print job Further options can also be passed to the CORE UNIX filter through the 1p command Command line options takes pr
18. 7 installation requirements ver5 8 Solaris 5 8 installation requirements User s Guide TOSHIBA e STUDIO28 35 45 Unix Printer Driver Linux Additional Files Description shfilter scr Middle script filter for Linux server installations used to parse parameters received from Ip and passed to the CORE filter The Linux installer assumes that the Korn shell exists in bin If Korn ksh does not exist in bin the usr local tsbprn ps shfilter ps tos file must be modified to the existing shell in bin If Borne Again bash shell is available edit the first line in shfilter ps tos file replace bin ksh with bin bash shfilter cint Middle script filter for Linux client systems that passes the input file from the client to the server print queue User s Guide TOSHIBA e STUDIO28 35 45 Unix Printer Driver setup Installation Program Depending on your network environment distribution of clients and planned print configuration you may run only server installations of the Unix driver or both client and server installations Pre Installation Procedures Before running server or client install program review the following points e Login as the superuser root of the system to ensure that all files are installed to their correct location Only root is allowed to perform installation procedures e The installation program can be executed from the current folder or from a local copy
19. Binding short Short Edge Binding Long Edge Binding The pages are bound on the long side regardless of orientation AI ped Figure 12 Portrait Figure 13 Landscape Short Edge Binding The pages are bound on the short side regardless of orientation Figure 15 Landscape Figure 14 Portrait User s Guide 20 TOSHIBA e STUDIO28 35 45 Unix Printer Driver Number of Copies The user can specify 1 999 copies Keyword Name Translation Display Text copies Number of Copies Type Range Integer 1 999 Additional PPD specified Property Tabs The Personality and Options tabs are examples of PPD specified property tabs The settings in PPD tabs are detected from the PPD configuration file associated with the driver during installation Personality Tab gt Toshiba e STUDI045 Series Printer Driver aE Setup Personality Options About Rotate 180 Degrees Finishing Left Double Staple Hole Punch Left Smoothing On x Exit Save settings Help Figure 16 Personality tab Rotate 180 Degrees The user can enable or disable 180 degrees rotation Keyword Name Translation Display Text userrotate 180 Rotate 180 Degrees Option Name Translation Display Text 0 No 1 Yes User s Guide 21 TOSHIBA e STUDIO28 35 45 Unix Printer Driver Finishing The user can specify to turn on collation and stapling Hole Punch
20. O28 35 45 Unix Printer Driver Message Description gueue Default is No Install User Interface configuration program Y n Asks whether to install the rcutil configuration program Default is Yes Default driver path Identifies the current default driver path The driver path is the system s directory for modelscript middlescript or backend program Change driver path y N Asks whether to specify a different driver path Default is No Specify a driver path y N Asks whether to name a driver path or not Default is No This should never appear This is added as a precautionary measure only if the default printer port was not detected Specify name of driver path Prompts for new driver path Default CORE filter manpage path Identifies the current default CORE filter manpage path Change CORE filter manpage path y N Asks whether to specify a different CORE filter manpage path Default is No Specify CORE filter manpage path y N Asks whether to name a CORE filter manpage path or not Default is No This should never appear This is added as a precautionary measure only if the default printer port was not detected Specify CORE filter manpage path Prompts for new CORE filter manpage path Default configuration program manpage path Identifies the current default configuration program manpage path Change configuration program manpage path y N
21. ORE driver translates print commands and drives printing on UNIX and Linux platforms e The rcutil configuration program provides a visual interface to the driver for graphical access to print properties specified in the PostScript Printer Description PPD file It also comes with the install installation script that is used to install and un install print gueues The install installation script first checks the system for Motif support before running the setup installation program This manual contains information on e Pre installation and system requirements e Installation and un installation process e rcutil Property tabs e Using the rcutil configuration program to save print settings e Print command reference e Printing from the command line and from applications e Error and status messages Guidelines This manual uses the following rules for the use of symbols and font style in this document bold Verana font means a title or an important concept bold Courier New font means a program name program variable a directory or path name or a constant value Solaris Solaris from here on refers to both SunOS and Solaris User s Guide 1 TOSHIBA e STUDIO28 35 45 Unix Printer Driver Pre installation System Reguirements English versions of the following operating systems are supported for use with the GA 1040 Printer Driver Sun Solaris 2 4 or later SPARCstation Sun Solari
22. Page First lt Last Page First Print First Page First v Last Page First Orientation Portrait Landscape Orientation Portrait Landscape Print w Greyscale Color Print Greyscale Color Paper Size Letter 8 1 2 11in w Legal 8 1 2 x 14 in Paper Size Letter 8 1 2x 11in lt Legal 8 1 2 x 14 in s Executive 7 1 2x 10in A4 210 x 297 mm wv Executive 7 1 2x 10 in w A4 210 x 297 mm Figure 24 Print to Printer Figure 25 Print to File Then click on Print button to start printing the file through pshakuba print queue In Figure 23 the printout will be double sided long edge and will use tabloid paper size In Figure 24 if printing to file specify the destination file in the File Name field then click the Print button After the dialog finishes use 1p to send the printed file to the print queue as in the following lp d pshakuba o duplex o tabloid home username filetoprn ps Duplexing and tabloid paper size will also then be applied to the print job User s Guide 37 TOSHIBA e STUDIO28 35 45 Unix Printer Driver Printing in Adobe Acrobat Reader Specify in the print command the print queue and the options that will be applied to the printout Figure 26 Acrobat Reader print dialog If printing to file as in the following figure Figure 27 Printing to file specify the destination file in the File Name field then click the Print bu
23. SE Electronics For Imaging Inc grants you a non exclusive non transferable license to use the software and accompanying documentation Software included with the controller GA 1040 for TOSHIBA e STUDIO28 35 45 Series printer you have purchased including without limitation PostScript software provided by Adobe Systems Incorporated You may a usethe Software solely for your own customary business purposes and solely with the controller GA 1040 for TOSHIBA e STUDIO28 35 45 b usethe digitally encoded machine readable outline and bitmap programs Font Programs provided with the controller GA 1040 for TOSHIBA e STUDIO28 35 45 in a special encrypted format Coded Font Programs to reproduce and display designs styles weights and versions of letters numerals characters and symbols Typefaces solely for your own customary business purposes on a monitor used with the controller GA 1040 for TOSHIBA e STUDIO28 35 45 c use the trademarks used by Electronics For Imaging to identify the Coded Font Programs and Typefaces reproduced therefrom Trademarks and d assign your rights under this Agreement to a transferee of all of your right title and interest in and to the controller GA 1040 for TOSHIBA e STUDIO28 35 45 provided the transferee agrees to be bound by all of the terms and conditions of this Agreement You may not a make use of the Software directly or indirectly to print bitmap images with pri
24. THIS LIMITATION WILL APPLY EVEN IF ELECTRONICS FOR IMAGING OR ANY AUTHORIZED DEALER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE YOU ACKNOWLEDGE THAT THE PRICE OF THE CONTROLLER GA 1040 FOR TOSHIBA e STUDIO28 35 45 REFLECTS THIS ALLOCATION OF RISK BECAUSE SOME STATES JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES THE ABOVE LIMITATION MAY NOT APPLY TO YOU EXPORT CONTROLS You agree that you will not export or re export the Software or Coded Font Programs in any form without the appropriate United States and foreign government licenses Your failure to comply with this provision is a material breach of this Agreement GOVERNMENT USE Use duplication or disclosure of the Software by the United States Government is subject to restrictions as set forth in subdivision c 1 ii of the Rights in Technical Data and Computer Software clause at DFARS 252 227 7013 or in subparagraphs c 1 and 2 of the Commercial Computer Software Restricted Right Clause at 48 CFR 52 227 19 as applicable THIRD PARTY BENEFICIARY You are hereby notified that Adobe Systems Incorporated a California corporation located at 345 Park Avenue San Jose CA 95110 2704 Adobe is a third party beneficiary to this Agreement to the extent that this Agreement contains provisions that relate to your use of the Fonts the Coded Font Programs the Typefaces and the Trademarks licensed hereby Such provi
25. TOSHIBA E DIGITAL PLAIN PAPER COPIER O R OPERATOR S MANUAL OR PRINTER FUNCTION AN NT ETWORK PRINTER BOARD GA 1040 UIDE FOR UNIX FILTER TOSHIBA e STUDIO28 35 45 Unix Printer Driver FCC IC NOTICE This eguipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference when the eguipment is operated in a commercial environment This eguipment generates uses and can radiate radio freguency energy and if not installed and used in accordance with the instruction manual may cause harmful interference to radio communications Operation of this eguipment in a residential area is likely to cause harmful interference in which case the user will be reguired to correct the interference at his own expense This Class A digital apparatus complies with Canadian ICES 003 Cet appareil num rique de la classe A est conform la norme NMB 003 du Canada WARNING Changes or modification made to this eguipment not expressly approved by Toshiba Tec or parties authorized by Toshiba Tec could void the user s authority to operate the eguipment For European models only WARNING This product complies with Class A for network connection In a domestic environment this product may cause radio interference in which case the user may be reguired to take adeguate measures 1 Do notto
26. The Hole Punch setting is the selection for punch holes whether turned off or Keyword Name Translation Display Text finishing Finishing Option Name Translation Display Text none None sort Sort group Group alternation Alternation stapleul Upper Left Staple stapleur Upper Right Staple staplel2 Left Double Staple staplet2 Top Double Staple saddle Saddle Stich punched on the left or top of the page Smoothing Keyword Name Translation Display Text punch Hole Punch Option Name Translation Display Text none Off left Left top Top The user can specify whether to turn on or off smoothing Keyword Name Translation Display Text refine Smoothing Option Name Translation Display Text off Off type1 On User s Guide 22 Options Tab TOSHIBA e STUDIO28 35 45 Unix Printer Driver Toshiba e STUDIO45 Series Printer Driver Setup Personal ity Options About Pedestal Option Finisher Option Punch Unit Not Installed z Saddle Stitch Finisher 4 2 3 Hole Punch Unit 4 Exit Save settings Help Figure 17 Options tab Pedestal Option This setting provides the choices for the installed pedestal devices Keyword Name Translation Display Text pedestaloption Pedestal Option Option Name Translation Display Text none Not In
27. USINESS INFORMATION AND THE LIKE ARISING OUT OF THE USE OR INABILITY TO USE THE APPLE SOFTWARE EVEN IF APPLE HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES BECAUSE SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEOUENTIAL OR INCIDENTAL DAMAGES THE ABOVE LIMITATIONS MAY NOT APPLY TO YOU Apple s liability to you for actual damages from any cause whatsoever and regardless of the form of the action whether in contract tort including negligence product liability or otherwise will be limited to 50 Copyright TOSHIBA TEC Corp 2002 All Rights Reserved Under the copyright laws this manual cannot be reproduced in any form without prior written permission of TOSHIBA TEC No patent liability is assumed with respect to the use ofthe information contained herein No part of this manual may be copied in whole or part without permission The contents of this manual may change without notification User s Guide ii TOSHIBA e STUDIO28 35 45 Unix Printer Driver SOFTWARE LICENSE AGREEMENT YOU SHOULD CAREFULLY READ THE FOLLOWING TERMS AND CONDITIONS BEFORE USING THIS SOFTWARE IF YOU DO NOT AGREE TO THE TERMS AND CONDITIONS OF THIS AGREEMENT DO NOT USE THE SOFTWARE INSTALLING OR USING THE SOFTWARE INDICATES THAT YOU AGREE TO AND ACCEPT THE TERMS OF THIS AGREEMENT IF YOU DO NOT AGREE TO ACCEPT THE TERMS OF THIS AGREEMENT YOU MAY RETURN THE UNUSED SOFTWARE FOR A FULL REFUND TO THE PLACE OF PURCHASE LICEN
28. ecedence over the settings saved in the settings file The rcutil configuration program only saves the changed or non default settings Only the settings that differ from the PPD default settings are saved to the settings file The PPD default settings are not saved The CORE UNIX filter knows the default settings when it loads as it reads in the default settings from the PPD file The CORE UNIX filter only needs to know the new non default settings to apply to the print job The settings file serves as a record of the settings that the user wants preserved for the next print job User Home Directory Access Restrictions During printing the 1pa printing system through the 1p system account must be able to access the 533rc settings file Being that the settings file is maintained in the user s home directory the user s home directory itself must be accessible to 1p Otherwise the Unix filter will fail to retrieve the saved settings and so no features will be applied on to the print job The user s home directory must have an executable attribute for users of type others Thatis the last attribute of the directory must show an x It must be something like dabcabcabx where a can be a or r for readable b can be or w for writable and c can be a or x for executable The last attribute is the c but is User s Guide 28 TOSHIBA e STUDIO28 35 45 Unix Printer Driver reguired to be turned on This would allow the 1p system accou
29. ent and Trademark Office and or certain other foreign jurisdictions The Electronics For Imaging logo the Fiery Driven logo Command WorkStation DocBuilder DocBuilder Pro Fiery X3e Fiery FreeForm Fiery Scan Fiery ScanBuilder Fiery Weblnstaller Fiery WebScan Fiery WebSpooler Fiery WebStatus Fiery WebTools NetWise Velocity Velocity Balance Velocity Build Velocity Design Velocity Estimate and Velocity Scan are trademarks of Electronics For Imaging Inc All other terms and product names may be trademarks or registered trademarks of their respective owners and are hereby acknowledged Legal Notices APPLE COMPUTER INC APPLE MAKES NO WARRANTIES EXPRESS OR IMPLIED INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE REGARDING THE APPLE SOFTWARE APPLE DOES NOT WARRANT GUARANTEE OR MAKE ANY REPRESENTATIONS REGARDING THE USE OR THE RESULTS OF THE USE OF THE APPLE SOFTWARE IN TERMS OF ITS CORRECTNESS ACCURACY RELIABILITY CURRENTNESS OR OTHERWISE THE ENTIRE RISK AS TO THE RESULTS AND PERFORMANCE OF THE APPLE SOFTWARE IS ASSUMED BY YOU THE EXCLUSION OF IMPLIED WARRANTIES IS NOT PERMITTED BY SOME STATES THE ABOVE EXCLUSION MAY NOT APPLY TO YOU IN NO EVENT WILL APPLE ITS DIRECTORS OFFICERS EMPLOYEES OR AGENTS BE LIABLE TO YOU FOR ANY CONSEOUENTIAL INCIDENTAL OR INDIRECT DAMAGES INCLUDING DAMAGES FOR LOSS OF BUSINESS PROFITS BUSINESS INTERRUPTION LOSS OF B
30. estination Auto Select 4 Number of Copies pu Media Type Normal 2 Exit Save settings Help Figure 7 Setup Tab Paper Size The list of available paper sizes will be determined from the PPD associated with the driver The user can select any one of the available sizes as well as specify a custom size if Custom Size is one of the choices Keyword Name Translation Display Text pagesize Paper Size Option Name Translation Display Text letter Letter legal Legal ledger Ledger statement Statement a4 A4 a3 A3 b5 B5 b4 B4 a5 A5 User s Guide 17 TOSHIBA e STUDIO28 35 45 Unix Printer Driver Paper Source The list of available input paper trays will be determined from the PPD associated with the driver The user can select any one ofthe available trays Destination Keyword Name Translation Display Text papersource Paper Source Option Name Translation Display Text auto Auto Select upper Upper Cassette lower Lower Cassette pfpu Pedestal Upper Cassette pfpl Pedestal Lower Cassette Icf Large Capacity Feeder manual Bypass Short Edge manualr Bypass Long Edge The list of available output trays will be determined from the PPD associated with the driver The user can select any one of the available trays Media Type Keyword Name Translation Display Text destina
31. fault Portrait Non native keyword variations portrait gt Orientationtportrait landscape gt Orientation landscape revportraint gt Orientationtreverseportrait revlandscape gt Orientationtreverselandscape 4 Figure 20 Bottom part of Help dialog User s Guide 25 TOSHIBA e STUDIO28 35 45 Unix Printer Driver Localization The buttons and settings fields in the user interface can be renamed by editing the Rcutil resource file This file is found in usr lib X11 app defaults except in Solaris where it is found in usr openwin lib X11 app defaults User s Guide 26 TOSHIBA e STUDIO28 35 45 Unix Printer Driver Using rcutil Running rcutil To launch the GUI setup program run opt rcutil on the command line opt rcutil lt Return gt Note e The rcutil configuration program uses the same PPD configuration file as the CORE UNIX filter It parses the PPD configuration file to display the settings in the GUI If it cannot find the PPD configuration file it will abort and the GUI will not display Please coordinate with your System Administrator if you have this situation e The opt rcutil is a symbolic link to the actual file installed in the driver files path UNIX LINUX System Driver Files Location HPUX usr local tsbprn Solaris SPARC etc lp interfaces tsbprn Solaris Intel usr local tsbprn AIX usr local tsbprn Red Hat Linux usr local tsbprn
32. fault printer port was not detected Specify middle script Prompts for new middle script Default pass thru name Identifies the current default pass thru name Use a different pass thru name y N Asks whether to name a pass thru name or not Default is No This should never appear This is added as a precautionary measure only if the default printer port was not detected Specify pass thru name Prompts for new pass thru name Installing the man pages Status message when starting to install the man pages EFTPS manpage already exists and will be updated Status message when installing over an existing CORE filter manpage rcutil manpage already exists and will be updated Status message when installing over an existsing configuration program manpage Installing the EFTPS manpage Status message during actual install of CORE filter manpage Installing the rcutil manpage Status message during actual install of User s Guide 42 TOSHIBA e STUDIO28 35 45 Unix Printer Driver Message Description configuration program manpage To see supported CORE options enter man Tells users on how to view the CORE filter EFTPS manpage To see GUI setup program manpage enter man Tells users on how to view the rcutil configuration program manpage rcutil Configuration Program Status X Hole PunchiLeft not allowed due to Punch Uni
33. ging or an authorized dealer will be at Electronics For Imaging s option to use reasonable commercial efforts to attempt to correct or work around errors to replace the Software with functionally equivalent software or to refund the purchase price and terminate this Agreement Some states jurisdictions do not allow limitations on duration of implied warranty so the above limitation may not apply to you For warranty service please contact your authorized service support center EXCEPT FOR THE ABOVE EXPRESS LIMITED WARRANTY ELECTRONICS FOR IMAGING MAKES AND YOU RECEIVE NO WARRANTIES OR CONDITIONS ON THE SOFTWARE OR CODED FONT PROGRAMS EXPRESS IMPLIED STATUTORY OR IN ANY OTHER PROVISION OF THIS AGREEMENT OR COMMUNICATION WITH YOU AND ELECTRONICS FOR IMAGING SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTY OR CONDITION OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE Electronics For Imaging does not warrant that the operation of the software will be uninterrupted or error free or that the Software will meet your specific requirements User s Guide iv TOSHIBA e STUDIO28 35 45 Unix Printer Driver LIMITATION OF LIABILITY IN NO EVENT WILL ELECTRONICS FOR IMAGING OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES INCLUDING LOSS OF DATA LOST PROFITS COST OF COVER OR OTHER SPECIAL INCIDENTAL CONSEQUENTIAL OR INDIRECT DAMAGES ARISING FROM THE USE OF THE SOFTWARE OR CODED FONT PROGRAMS HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY
34. gram e Save settings button Stores the non default settings to driver user defaults file 533rc The defaults are the settings from the PPD configuration file Only the settings changed through that GUI would be saved to the user defaults file e Help button Opens the Help dialog describing how to use this rcutil configuration program User s Guide 24 TOSHIBA e STUDIO28 35 45 Unix Printer Driver Help Dialog The Help dialog provides a description of the GA 1040 Printer Driver including the features enabled in the driver Toshiba e STUDIO45 Series Printer Driver PostScript Driver for UNIX Introducing the Toshiba e STUDIO45 Series Printer Driver for Unix Printing layout or formatted text in Unix Systems can now be done using the Toshiba e STUDIO4S Series Printer Driver for Unix This driver incorporates the technology in Windows print drivers to make printing easy in Unix and Linux environments Summary of Features o Media settings can be specified and saved through the Graphical User Interface to a settings file which is later read to print a file through the Toshiba e STUDIO45 Series Printer Driver for Unix o The driver is capable of connecting to and enabling features for any Toshiba lt or Fiery printer through the use of custom configuration lt PPD PDD gt files o Pre formatted files eg PostScript files are automatically detected and sent to printer with finishing options applied and without
35. gs the file will be empty and no settings will be saved Status X Default settings selected Figure 22 When no setting is saved When a setting is saved the following message is shown Status x New settings saved to file home neilb f533rc Figure 23 When any setting is saved User s Guide 30 TOSHIBA e STUDIO28 35 45 Unix Printer Driver Illustrated Process and Data Flow rcutil GUI program is invoked by user GUI Process Read settings from E533rc e When Save settings button is clicked on the non default settings are saved back to the settings file 533rc is a custom default setting for each user Toshiba e STUDIO45 Series Printer Driver nl xl A e The Exit button causes the eme Jerem tte toi rcutil to terminate Paper Size Letter E rientation Portrait 4 Paper Source Auto Select af Duplex Long Edge Binding lt f Destination Auto Select 4 Number of Copies p Media Type Normal 4 l rcutil configuration program Exit Save settings Help User s Guide 31 TOSHIBA e STUDIO28 35 45 Unix Printer Driver Unix CORE Driver Process Unix CORE driver is invoked by 1p command Apply features and generate output file User s Guide 32 TOSHIBA e STUDIO28 35 45 Unix Printer Driver Printer Driver Details This section describes in detail the features available in the GA 1040 Printer Driver Standard Option
36. guration file thick mtypethick Orientation orientation lt param gt Print in portrait landscape reverse portrait portrait portrait or reverse landscape mode landscape landscape reverseportrait revportrait reverselandscape reviandscape User s Guide 33 TOSHIBA e STUDIO28 35 45 Unix Printer Driver Feature Keyword Option Non native form Description Duplex duplex lt param gt For simplex print single sided If not single simplex specified the printer s front panel long duplex double vd d sets the default to either simplex or short hduplex hd duplex For duplex and hduplex print double sided with long edge binding short edge binding This command is defined in the configuration file Relay relay lt param gt CORE option only This feature allows on relay the CORE driver to print a formatted off file with some PJL commands added in the print job header and footer These PJL commands can be finishing options that will be applied to the page on the engine at print time Options list options lt param gt CORE option only Lists all available on options optionson options off optionsoff Language language lt param gt Force language to PostScript mode selection postscript post postscript Only the PDL for the specific build is valid For example if the driver is a PostScript build post is the only valid parameter To use PCL5 use the PCL5 Unix driver build To use PCL6 use
37. hrough the Ip command o lp d printqueue o keywordl option o keyword2 option filename prn keyword option is any pairing of a feature and one of its corresponding options Example Punch Left Or PageSize A4 NOTE e The actual output using this method may be affected by any settings saved in the settings file 533rc Printing from Unix applications Printing is possible directly from Unix Linux applications This section discusses printing from Netscape Navigator and Adobe Acrobat Reader Once the printer driver has been installed print jobs can be sent to the print queue directly from Unix applications or from command line If the application being used has a print dialog specify the lp command in the Print Command field and use the print queue to send the job to If the application has the capability to print to file print the document to file and send the output file through 1p command to the print queue These are better illustrated in the next sub sections User s Guide 36 TOSHIBA e STUDIO28 35 45 Unix Printer Driver Printing in Netscape Navigator Specify in the print command the print gueue and the options that will be applied to the printout Print To Printer v File Print To w Printer File Print Command 1p a pshakuba o duplex o tabloid Print Command Ly d pehakuba o duplex o tabloid File Name E et scape ps ip File Name none usrname filetoprn ps Browse Print First
38. la og making a local copy of the installation folder E r e ei e a i id The help button shows the help dialog progran is invoked will dieabla the Ip scheduler during the which describes the setup installation Intalltion if recesary pon isa ie program The text displayed in this dialog itil inte i ti 2 Moti t H H and neha leane 14 15 jae Ss but LE ren eee IS ta ken from the Setup txt that IS that Motif 2 1 or Motif 1 2 be installed on the system where P i reutil will be installed shipped with the driver x To launch the setup installation program in GUI mode the DISPLAY environment variable must be set The user must manually set this on the command line For example type DISPLAY host 0 on the command line host is the name of the terminal where setup would be launched It can also be the IP address of the said terminal After assigning value to DISPLAY export the 4 Figure 6 Help dialog Text Mode If the program fails to detect support for X Windows in the Unix Linux system or if g no is specified in the command line parameters the program will run in Text mode Installation mode Usage install g lt gueue gt s lt server gt p lt portvalue gt t lt insttype gt g no The g no parameter launches the installation program in Text mode If lt gueue gt and lt server gt is not specified the installation program will prompt for them If lt portvalue gt is not specified the p
39. led Further setup customization Status message that implies more prompts to follow Default remote print queue lt remoteprintqueue gt Identifies the current default print queue Change destination print queue y N Asks whether to specify another remote print queue or use default print queue Default is No Specify a destination print queue y N Asks whether to name a destination print queue or not Default is No This should never appear This is added as a precautionary measure only if the default remote print queue was not detected Specify name of destination remote queue Prompts for name of new destination print queue Default network printer port Identifies the current default printer port Change destination printer port y N Asks whether to specify another destination port or use default port Default is No Specify a destination printer port y N Asks whether to name a destination port or not Default is No This should never appear This is added as a precautionary measure only if the default printer port was not detected Specify name of destination printer port Prompts for name of new destination printer port Install Manpages y N Asks whether to install the manpages or not Default is No Set as default y N Asks whether to set the installed print queue as the system s default print User s Guide 40 TOSHIBA e STUDI
40. lled print gueues and will ask which print gueue will be un installed Post Installation Procedures The setup installation program assumes lpsched is running when the program is invoked It will disable the 1p scheduler during the installation process Restart the scheduler manually after installation if necessary In GUI installation mode a successfully set up print queue is added and selected in the setup Printer List field In text installation mode you can use lpstat v W for AIX systems to verify if the print queue has been successfully installed in the system lpstat lists down the print queues available in the system Platform Specific Checks Linux Shell For Linux systems it is assumed that the Korn shell exists in bin If Korn ksh does not exist in bin the usr local tsbprn shfilter ps tos file must be modified to reflect the supported shell in the system If for example Borne Again bash shell is available edit the first line in shfilter ps tos file replacing bin ksh with bin bash SunOS windex For SunOS installing the manpages may require an extra step updating of the windex file This file is an index of all manpages in a given main directory for manpages Only those manpages with entries in the windex file will be available and User s Guide 15 TOSHIBA e STUDIO28 35 45 Unix Printer Driver shown when the man command is used If a manpage has no entry in the windex file the said manpage may
41. loptionnone installed pedestal pedestaloptionpedestal1 pedestal2 pedestaloptionpedestal2 Icf pedestaloptionlcf Finisher Option finisher lt param gt Specifies which finishing device is false finisherfalse installed hangingfinisher finisherhangingfinisher finisher finisherfinisher saddle finishersaddle Punch Unit punchunit lt param gt Specifies which punch unit device is none punchunitnone installed 2hole punchunit2hole Shole punchunit hole 4holef punchunitdholef 4holes punchunitdholes Printing To send a job from the command line you can type the following on the command line lp d lt print gueue gt o optionl o option2 or lp d lt print gueue gt o optionl option2 o optionn lt file to print gt optionn lt file to print gt Note The second form of the command may not work on some systems If this happens use the first form User s Guide 35 TOSHIBA e STUDIO28 35 45 Unix Printer Driver The option can be inthe non native or native format Native format means keyword option while non native means keywordoption Some options can be specified as just option for example A4 or duplex Methods of Printing Through rcutil e Run rcutil e Make changes in the settings in the GUI e Save settings f533rc will be updated in the user s home directory e Exit rcutil e Use 1p command to send the job o lp d printgueue filename prn Through the command line e Pass the options t
42. not be displayed using the man command If windex exists in the main manpage directory an entry for the manpage must be added into it If it does not exist in the main manpage directory all manpages within the subdirectories will be available to the man command If the windex file exists the setup installation program updates it automatically each time the manpages are installed The installation program makes a backup copy of the windex by renaming the file as windex orig done before updating the windex file It is recommended that you save a copy of the windex file somewhere else so that it will not be lost as the setup installation program may update the windex file several times depending on how many print gueues and manpages are being installed The setup installation program does not create a windex file ifit is originally not found in the main manpage directory User s Guide 16 TOSHIBA e STUDIO28 35 45 Unix Printer Driver rcutil Property Tabs The GA 1040 Printer Driver reutil configuration program consists of four property tabs Setup Personality Options and About tabs Setup Tab This tab contains the standard printer settings paper size paper source destination tray media type orientation duplex and number of copies Toshiba e STUDIO45 Series Printer Driver lol x Personality Options About Paper Size Letter D Orientation Portrait Paper Source Auto Select 4 Duplex Long Edge Binding D
43. nt resolutions of greater than 600 dots per inch or to generate fonts or typefaces for use other than with the controller GA 1040 for TOSHIBA e STUDIO28 35 45 b make or have made or permit to be made any copies of the Software Coded Font Programs accompanying documentation or portions thereof except as necessary for use with the controller GA 1040 for TOSHIBA e STUDIO28 35 45 purchased by you provided however that under no circumstances may you make or have made or permit to be made any copies of that certain portion of the Software which has been included on the controller GA 1040 for TOSHIBA e STUDIO28 35 45 hard disk drive or ROM You may not copy the documentation c attempt to alter disassemble decrypt or reverse engineer the Software Coded Font Programs d rent or lease the Software User s Guide iii TOSHIBA e STUDIO28 35 45 Unix Printer Driver PROPRIETARY RIGHTS You acknowledge that the Software Coded Font Programs Typefaces and Trademarks are proprietary to Electronics For Imaging and its suppliers and that title and other intellectual property rights therein remain with Electronics For Imaging and its suppliers Except as stated above this Agreement does not grant you any right to patents copyrights trade secrets trademarks whether registered or unregistered or any other rights franchises or licenses in respect of the Software Coded Font Programs Typefaces or Trademarks You may not adapt or use
44. nt to have access to the settings file stored in the user s home directory If you re having a problem printing in your system check if the user s home directory satisfies the condition described above Use 1s 1 home ifthe user s home directory has executable access If not you can turn it on using chmod o x home userdirectory User s Guide 29 TOSHIBA e STUDIO28 35 45 Unix Printer Driver Constraints As settings are changed the program checks if the selection violates some constraints specified in the PPD configuration file The constraints are rules that tell when an option is valid when combined with other options For example Punch holes cannot be done if there is no puncher An A3 paper size may not be allowed to come from Tray 3 Duplex may not be allowed on Transparency paper These are only examples To find out about what options can be combined with other options you must check the PPD configuration file A message will be shown when you select an option that violates a constraint Status X Hole PunchiLeft not allowed due to Punch Unit Not Installed Please try a different setting Figure 21 Constraint violation error Saving settings The Save settings button saves the changed non default settings to the settings file The program checks if the selected options are non default compared to values from configuration file If so they are saved If all settings are default settin
45. o data structure FATAL ERROR Cannot allocate string buffer Failed to allocate memory for a string buffer ERROR Failed to read new manpage path Prompt for CORE filter manpage path failed ERROR Failed to read new manpage path Prompt for rcutil manpage path failed ERROR Failed to read new Ul Link Path Prompt for reutil link path eg opt failed ERROR Failed to read new temporary files path Prompt for the temporary files path failed Unknown choice Please re enter choice When user selects an invalid value in the prompt for identifying the type of remote server OS ERROR Failed to read new client middle script name Prompt for client middle script name failed ERROR Failed to read new middle script name Prompt for middle script name failed ERROR Failed to read new pass thru name Prompt for pass thru name failed ERROR Failed to initialize driver installation info Failed to allocate memory for driver installation info or failed to initialize manpage path names setup s not installer for lt platform gt Please use the lt platform gt installer If setup is accidentally launched in an unsupported platform for instances that the setup binary program may run in such platforms ERROR Failed to detect user name Failed to determine the name of the current logged on user using the whoami system utility ERROR lt username gt i
46. our system administrator on how to configure your system for running programs with GUI e If DISPLAY is not set the setup installation program will run in Text mode The installation program detects the system capability for graphics and can run in either Text or GUI mode e Man pages must be updated to customize it to your need Currently the man pages contains a place holder for the contact info for troubleshooting You can update this with a correct contact info NOTE Do not modify application names such as EFTPS35 as the installation program automatically parses it e Update text files that are used by the driver as Help files for further customization These files are the Setup txt and F533Readme txt install Installation Script The install script is the installation utility and is the secure way for installing or un installing the Unix driver It performs initial system checks before actually launching the setup installation program Its major role is to check if Motif library is installed in the target system This is provided for convenience to avoid unexpected User s Guide 6 TOSHIBA e STUDIO28 35 45 Unix Printer Driver system errors when launching the setup installation program directly on systems without Motif support The install installation script will show an error message if it cannot find the Motif library in the system except for Linux where the driver is built to run even on systems without Motif support If
47. rogram also installs a symbolic link to the reutil configuration program in the location specified in the UI Link Path field This is opt by default e Temporary files path o The setup installation program creates temporary files during installation If tmp is unavailable in the system this field specifies an alternative location where temporary files can be created This is tmp by default If you like the installation program to install the symbolic link in a different path say bin or usr bin you can specify this new value in the Temporary files path field e Pass Thru reserved o This is only for AIX systems without support for the rembak system utility e If the bullet is selected the user can type in a name on the text field It will be used as the pass thru name e If the bullet is not selected the setup installation program will generate detect a pass thru name NOTE e The pass thru queues are required for sending filtered jobs from the print queue to the Fiery ports print direct or hold e This is only included as a fallback solution in AIX systems which currently does not provide easy access to Fiery ports If the current solution of using the rembak utility fails pass thru queues will be created Printer List e Print Queue column o This enumerates the print queues installed in the system and that are associated to the GA 1040 Print Driver e Destination column o This shows to which network server with Fiery printer po
48. rogram will show the default which is print and will ask if a different value will be used If lt insttype gt is not specified the default installed print gueue type is server User s Guide 14 TOSHIBA e STUDIO28 35 45 Unix Printer Driver The program will also prompt for other settings such as manpage path middle script name temporary files location or UI Link path Follow screen prompts to specify non default settings Whenever a yes no type guestion is asked the upper case letter identifies the default response For example y N N isthe default You can just press the Return or Enter key to use the default setting After all information is specified the program begins the install process Status and error messages are shown to guide user through the install process Uninstallation mode Usage install u g lt gueue gt t lt insttype gt g no The g no parameter launches the program in Text mode If only u is specified it will list down all installed print gueues related to the driver and let you choose which print gueue to un install If lt gueue gt is specified it will un install the lt gueue gt if it is installed in the system If not it will list down all installed print gueues related to this driver If t all is specified it will un install all related print gueues even if lt gueue gt is specified If lt gueue gt is not specified in the parameters the program will list down insta
49. rt the print queue will send jobs to e UI Link column o This shows the path where the symbolic link to the reutil configuration program associated to the print queue can be found Printer Status This displays the status of the currently selected print queue in the Printer list User s Guide 13 TOSHIBA e STUDIO28 35 45 Unix Printer Driver Status Dialog The Status dialog shows messages Setting up the print queue pshakuba to send jobs to gt aa 7 hakuba direct describing the progress of the installation Rie ier este process ERROR Printer queue pshakuba already exists The Done button closes the dialog after a successful installation or after an error occurs during installation It is disabled during the install process If a fatal error occurs the setup installation program terminates Cl Figure 5 Status dialog SETUP INSTALLATION PROGRAM LL Depending on your network environment distribution of clients and planned print configuration you may run only server installations of the Unix driver or both client and server installations PRE INSTALLATION PROCEDURES Before running server or client install program revieu the following points Log in as the superuser root of the system to ensure that all files are installed to their correct location H l Di l The installation program can be executed from the current folder or from a local copy of the installation folder We recommend e p
50. s Feature Keyword Option Non native form Description Copies copies copies where is in the Sets number of copies Range 1 999 range 1 999 Paper Size pagesize lt param gt Sets the paper size letter letter This command is defined in the ledger ledger tabloid 11x17 configuration file legal legal statement statement A3 A3 A4 A4 A5 A5 B4 B4 B5 B5 Paper Source papersource lt param gt tray1 Feed media from the specified tray auto tray2 upper ub ubin This command is defined in the upper tray3 lower Ib Ibin configuration file The preprocessor lower pupper puppercassette script file script c must be modified pfpu plower plowercassette when new trays are configured in the pfpl bypassS manual man printer manual manualfeed bypassL manualr Icf largecapacityfeeder Icf feeder Destination destination lt param gt Output pages to specified bin By Auto bin3 bin10 default the bin2 option face down inner is valid bin is the Tray1 face tray1 bin1 topbin down Bin3 through bin10 are tray2 bin2 optional external output bins This command is defined in the configuration file When the option bins are installed added in the configuration file the preprocessor script file script c must also be modified Media Type mediatype lt param gt Use the specified media type normal mtypeplain mtypenormal This command is defined in the transparency mtypetransparency confi
51. s SPARC etc lp interfaces tsbprn Sun Solaris Intel usr local tsbprn IBM AIX usr local tsbprn Red Hat Linux usr local tsbprn The driver and user interface files are placed in usr local tsbprn folder except on Solaris systems In most Solaris systems the usr local directory is a mounted NFS remote system and it is write protected Because of this the drivers are installed in etc lp interfaces tsbprn by default User s Guide 3 TOSHIBA e STUDIO28 35 45 Unix Printer Driver The driver cannot be installed on systems that have write protection turned on for the usr local folder The driver installation destination directory is fixed for each platform to the location specified in the table above This is currently not configurable as there is no concept of registry in Unix systems where settings can be saved at installation time and that could be retrieved later by the driver at run time If the installation directory does not exist or cannot be created the setup installation program will display error messages and terminate The following files are included in the Unix Driver package Common Files Description GA1040ReleaseNotes pdf Release Notes GA1040 pdf This documentation and manual RELEASE NUMBER This file contains the release number EFTPSxx CORE UNIX driver program that interprets and renders printed output xx specifies the release number rcutil Driver utility pro
52. s 8 Intel HP UX 10 0 or later IBM AIX 4 0 or later Red Hat Linux 6 0 or later The following system programs are needed for successful installation UNIX LINUX System System Tools HP UX usr bin nslookup usr lib Ipadmin usr sbin ipshut usr bin enable usr sbin lpsched usr lib accept Sun Solaris usr sbin nslookup usr lib Ipadmin SPARC Intel usr lib ipshut usr bin enable usr lib lpsched usr lib accept usr bin Ipstat IBM AIX usr bin host usr bin enable usr sbin piomisc_base mkque usr bin Ipstat mkquedev Red Hat Linux usr bin host etc rc d init d Ipd or etc init d Ipd If the utility is not in the specified path the named utility must be found in the system search path and can be run on the command line Motif Support The rcutil configuration program ships in two versions Motif 1 2 and Motif 2 1 Motif 2 1 supports combo box spin box and notebooks for property pages For systems with Motif 1 2 support the Unix driver is shipped with Motif 1 2 option menus and custom property pages The following packages are available Motif 2 1 System Requirement Details Solaris Motif 2 1 libraries libXm Needed to be installed in target system AIX Motif 2 1 libraries libXm Needed to be installed in target system Linux None No library is needed Motif 2 1 libraries are linked statically There is no Motif 2 1 support for the HP UX driver User s Guide
53. s not authorized to install this printer driver The user that launched the setup installation program does not have User s Guide 39 TOSHIBA e STUDIO28 35 45 Unix Printer Driver Message Possible Cause You must be root superuser to install superuser access is needed to be able to install the printer driver ERROR The default folder for manpage of lt manpage gt does not exist The manpage cannot be installed because the path for the manpage cannot be found or accessed ERROR Printer gueue lt printgueue gt already exists Print gueue that is passed as parameter as print gueue to be installed is already in the system Status and Prompt Messages Message Description Un install another gueue y N Asks whether to try to un install other detected print gueues Default is No Print Aueue Name Prompting for the print queue as it is not specified in the command line parameter Select print queue to delete choice s 1 n Ask for which detected print queue to un install Validating lt printqueue gt Status message when checking if print queue is not yet installed in the system Validating lt destinationname gt Status message when checking if network printer or remote server exists in the system Destination server Prompt for name of network printer or remote server to associate the print queue that is to be instal
54. sions are made expressly for the benefit of Adobe and are enforceable by Adobe in addition to Electronics for Imaging GENERAL This Agreement is governed by the laws of the State of California This Agreement is the entire agreement held between us and supersedes any other communications or advertising with respect to the Software and Coded Font Programs If any provision of this Agreement is held invalid the remainder of this Agreement shall continue in full force and effect If you have any questions concerning this Agreement please see Electronics For Imaging s web site at www efi com Electronics For Imaging 303 Velocity Way Foster City CA 94404 User s Guide v TOSHIBA e STUDIO28 35 45 Unix Printer Driver TABLE OF CONTENTS Introduction User s Guide vi TOSHIBA e STUDIO28 35 45 Unix Printer Driver User s Guide vii TOSHIBA e STUDIO28 35 45 Unix Printer Driver Introduction This manual describes how to install the user software for the TOSHIBA GA 1040 Network Printer Board set up printing and manage print jobs from a Unix client For information about setting up network servers and clients to use the GA 1040 see Administrator s Guide For general information on using the copier your computer your application software or your network see the manuals that accompany those products The GA 1040 Printer Driver consists of a Unix filter CORE driver and the rcutil configuration program e The C
55. stalled pedestal Pedestal 1 pedestal2 Pedestal 2 Icf Large Capacity Feeder Finisher Option This setting provides the choices for the installed finishing devices Keyword Name Translation Display Text finisher Finisher Option Option Name Translation Display Text false Not Installed hangingfinisher Hanging Finisher finisher Finisher saddle Saddle Stich Finisher TOSHIBA e STUDIO28 35 45 Unix Printer Driver Punch Unit This setting provides the choices for the installed punch unit devices Keyword Name Translation Display Text punchunit Punch Unit Option Name Translation Display Text none Not Installed 2hole 2 Hole Punch Unit Shole 213 Hole Punch Unit 4holef 4 Hole Punch Unit F 4holes 4 Hole Punch Unit S About Tab The About tab displays the product name version copyright and patents information Toshiba e STUDIO45 Series Printer Driver aix Setup Personality Options About Toshiba e STUDIO4S Series Printer Driver Version 1 0 0153 Copyright lt c 2002 TOSHIBA TEC Corp Copyright c 2002 Electronics for Imaging Inc All rights reserved Patents 5 666 436 5 553 200 5 543 940 5 537 516 5 517 334 5 506 346 5 424 754 5 343 311 5 212 546 4 941 038 4 837 722 4 500 919 Save settings Help Main Controls e Exit button Figure 18 About Tab Closes the reutil configuration pro
56. t Not Installed Please try a different setting Figure 31 Constraint violation error message Status X Default settings selected Figure 28 When no setting is saved Status kd New settings saved to file 7 f533rc EI Figure 30 When any setting is saved If 533rc cannot be created try mn F3 adding executable permission for other users for the directory No write permission on the settings file f533rc where it is being created If it s in the root directory edit and ok create an empty 533rc and then change its attribute so that other users has executable Figure 29 Error when f533rc cannot be permission Use chmod o w written on 533rc to do this User s Guide 43 TOSHIBA e STUDIO28 35 45 Unix Printer Driver CORE Driver A banner page is automatically printed if there s an error in the print job User lt username gt JobID lt jobidnumber gt Title lt doctitle gt Time DD MM D HH MM SS YYYY Copies 1 Options lt optionl gt lt option2 gt lt optionn gt Error message ee nn Figure 32 Banner page template The banner page contains the following header information Error type Banner Page error message Unrecognized non native parameter Cannot recognize option lt parameter gt Unrecognized native format parameter single Invalid option lt parameter gt word Unrecognized native forma
57. t parameter with Invalid keyword or parameter lt keyword gt lt option gt colon Constraint error A conflict was detected between lt param1 gt and lt param2 gt Please change either one of these settings For the unrecognized parameters check for validity the non native keyword or the native keyword and option pair The options page can be printed using the options on parameter or if running the rcutil configuration program on the Help page A constraint error means that one of the listed parameters either param1 or param2 cannot be used with each other To fix this error in next printing one of the parameter s values must be changed If either param1 or param2 is not actually one of the parameters passed to 1p that means that the default setting for the parameter violates the constraint setting for the other parameter To fix this the parameter must be passed as one of the parameters to lp with the correct non default setting User s Guide 44 2002 TOSHIBA TEC CORPORATION All rights reserved
58. tion Destination Option Name Translation Display Text auto Auto Select inner Inner Tray tray1 Tray 1 tray2 Tray 2 The list of available media types will be determined from the PPD associated with the driver The user can select any one of the available media types Keyword Name Translation Display Text mediatype Media Type Option Name Translation Display Text normal Normal transparency Transparency thick Thick Paper User s Guide 18 TOSHIBA e STUDIO28 35 45 Unix Printer Driver Orientation The user can select Portrait Landscape Reverse Portrait or Reverse Landscape Keyword Name Translation Display Text orientation Orientation Option Name Translation Display Text portrait Portrait landscape Landscape reverseportrait Reverse Portrait reverselandscape Reverse Landscape TEST Line 1 TEST Line 1 m M o Qi AA E C 2 2 ID FI Figure 9 Portrait Figure 8 Landscape N vow ce i Ek On on w LI FE 22111531 4 2071531 User s Guide 19 TOSHIBA e STUDIO28 35 45 Unix Printer Driver Duplex The user can select the output job to be Single single sided Long two sided with long edge binding or Short two sided with short edge binding Keyword Name Translation Display Text duplex Duplex Option Name Translation Display Text single None long Long Edge
59. tton After the dialog finishes use 1p to send the printed file to the print queue as in the following lp d pshakuba o duplex o tabloid home usr fileprn ps User s Guide 38 TOSHIBA e STUDIO28 35 45 Unix Printer Driver Messages The following tables show the messages that the installation program and the rcutil configuration program may generate with the possible causes why the messages are shown Installation Phase These messages are shown during installation phase Error Messages Message Possible Cause Please install the Motif library The lt library gt is missing Shown by install script if it fails to detect the Motif lt library gt in the system FATAL ERROR Cannot parse command line parameters due to lack of memory Failed to allocate memory for storing the command line parameter values ERROR Cannot find the server named lt servername gt in the network lt servername gt cannot be detected using nslookup Or host system utility programs ERROR Cannot find the printer named lt printername gt in the network lt printername gt cannot be detected using nslookup Or host system utility programs ERROR Failed to detect platform info Failed to allocate memory for detecting platform info ERROR Failed to read new driver path Prompt for driver path failed ERROR Failed to initialize driver installation info Cannot allocate memory for Driverlnf
60. uch the connector terminal when disconnecting the cables of peripheral eguipment 2 Before opening any covers or removing any units from the copier discharge the static electricity from your body by touching a metal part of the copier This product is carrying the CE Mark in accordance with the related European Directives Responsible for CE marking is TOSHIBA TEC GERMANY IMAGING SYSTEMS GmbH Carl Schurz Str 7 41460 Neuss Germany e mail customerservice toshibatec tgis com The software described in this publication is furnished under license and may only be used or copied in accordance with the terms of such license This product may be covered by one of more ofthe following U S Patents 4 500 919 4 837 722 5 212 546 5 343 311 5 424 754 5 467 446 5 506 946 5 517 334 5 537 516 5 543 940 5 553 200 5 615 314 5 619 624 5 625 712 5 666 436 5 760 913 5 818 645 5 835 788 5 867 179 5 959 867 5 970 174 5 982 937 5 995 724 6 002 795 6 025 922 6 041 200 6 065 041 6 112 665 6 122 407 6 134 018 6 141 120 6 166 821 6 185 335 6 201 614 6 215 562 6 219 659 6 222 641 6 224 048 6 225 974 6 226 419 6 238 105 6 239 895 6 256 108 6 269 190 6 289 122 6 292 270 6 310 697 6 327 047 6 327 050 User s Guide i TOSHIBA e STUDIO28 35 45 Unix Printer Driver Trademarks EFI Fiery the Fiery logo Fiery Driven and RIP While Print are registered trademarks of Electronics For Imaging Inc in the U S Pat
61. viding graphical access to print features and settings Rcutil Resource file that sets characteristics of the graphical interface F533Readme txt Driver readme file displayed as online help in the rcutil Help dialog This file can be customized for a particular environment toshibaps ppd GA 1040 PPD configuration file pditype Utility program that checks the type of input file whether text file PostScript file PCL5 or PCL6 file f533 man CORE Driver manual pages rcutil man Interface manual pages install Installation script that checks for Motif support before launching the setup installation program setup Installation un installation program for CORE driver and rcutil configuration program Setup txt Installation program readme file displayed as online help in the setup Help dialog box This file can be edited or customized for a particular environment Setup Resource file that sets characteristics of the graphical interface for the installation program AIX Additional Files Description bafilter ps Back end program required for installation on AIX systems passthru ins Installation script for the pass through filter HP UX Files Description modelscr Server installation model script remote scr Client installation model script Solaris Additional Description Files modelscr Server installation model script ver5 7 Solaris 5
62. you are sure that you have Motif installed in the system you can use the setup installation program directly The install installation script assumes pre defined libraries for determining whether the systems supports Motif or not The script checks if the libraries below exist in their specified locations Platform Library location HP UX usr lib libXm 2 Sun Solaris SPARC usr lib libXm so 4 Sun Solaris Intel usr lib libXm so 4 IBM AIX usr lib libXm a Red Hat Linux None If not the script will show an appropriate message If you think Motif is installed in the system you can also try running setup installation program directly on the command line setup e If it fails crashes please take note of any error message you get from the system and send it to us This would help us update the install script to reflect whatever library or file the setup installation program may require to run successfully in your system e BUT if setup runs and shows the user interface that could mean that it has found the Motif library somewhere in your system meaning you have a different location than usr lib for the Motif library In this case you can modify the install script to reflect this library path You can contact us if you like us to do this update for you just inform us the correct library path for your target system Syntax install uh q lt queue gt s lt server gt p lt portvalue gt

Toshiba e-STUDIO281c Copier User Manual

Contents

Download Pdf Manuals

Related Search

Related Contents