Home

Toshiba AM40 Flat Panel Television User Manual

Contents

1. E 11 Connecting a DVD player with ColorStream component video and a VCR 12 Connecting a DTV receiver set top box with ColorStream component video and a VCR 13 Connecting a camcorder 14 Connecting an HDMI or a DVI device to the HDMI iriput iiiter nit cette cete sete 15 Connecting a PC Personal Computer 16 Power essen eene nnns 16 Power connection eooni 16 Setting up your TV esee 17 Using the remote control 17 Preparing the remote control for use 17 Installing the remote control batteries 17 Using the remote control to operate your other Ir TE REESE 17 Programming the remote control to operate your other devices 18 Cable TV converter satellite receiver VCR and DVD player code tables 19 Learning about the remote control 21 Startinig Setup i secs ices eere erecti ee eei 22 Changing the on screen display language 22 Adding channels to the TV s memory 23 Programming channels automatically 23 Adding and erasing channels manually 23 Changing channels 23 J3U70221A E P02 10 7 Using the TV s
2. Toshiba Canada Limited TCL makes the following limited warranties to original consumers in Canada THESE LIMITED WARRANTIES EXTEND TO THE ORIGINAL CONSUMER PURCHASER OR ANY PERSON RECEIVING THIS LCD TELEVISION AS A GIFT FROM THE ORIGINAL CONSUMER PURCHASER AND TO NO OTHER PURCHASER OR TRANSFEREE LCD TELEVISIONS PURCHASED IN CANADA AND USED ANYWHERE OUTSIDE OF CANADA INCLUDING WITHOUT LIMITATION THE U S A AND MEXICO ARE NOT COVERED BY THESE WARRANTIES LCD TELEVISIONS PURCHASED ANYWHERE OUTSIDE OF CANADA INCLUDING WITHOUT LIMITATION THE U S A AND MEXICO AND USED IN CANADA ARE NOT COVERED BY THESE WARRANTIES Limited One 1 Year Warranty on Parts and Labour TCL warrants this LCD Television and its parts against defects in materials or workmanship for a period of one 1 year after the date of original retail purchase DURING THIS PERIOD TCL WILL AT TCL S OPTION REPAIR OR REPLACE A DEFECTIVE PART WITH A NEW OR REFURBISHED PART WITHOUT CHARGE TO YOU YOU MUST DELIVER THE ENTIRE TELEVISION TO AN AUTHORIZED TCL SERVICE DEPOT YOU MUST PAY FOR ALL TRANSPORTATION AND INSURANCE CHARGES FOR THE TELEVISION TO AND FROM THE SERVICE DEPOT Rental Units The warranty for LCD Television rental units begins on the date of the first rental or thirty 30 days after the date of shipment to the rental firm whichever comes first Limited Warranty for Commercial Units TCL warrants LCD Televisions that are sold and used for
3. nonscrambled channels your TV With the switch the A position program using the remote control such as tune your TV to the output of the Converter Descrambler box usually labeling channels blocking channels and channel 3 or 4 and use the box to tune scrambled channels programming your favorite channels From Cable TV back panel LIMONO R PR L MONO R o o G LAUDIO I DC IN 10 J3U70221A E P02 10 10 05 08 2005 10 13 AM _ 1 1 e Connecting a DVD player satellite receiver and a VCR This connection allows you to watch DVD satellite VCR or TV pro grams You can record from the satellite receiver and TV as well as record one TV channel while watching another channel From satellite DVD player Satellite Receiver VIDEO S VIDEO Stereo VCR IN from ANT OUT to TV CH3 CH4 TV back panel VIDEO LAUDIO DGIN ANT 75Q L MONO R bd You will need three coaxial cables two sets of standard A V cables one S video cable Note You can use a standard video cable instead of the S video cable but the picture quality will decrease If you use an S video cable between the TV and DVD player satellite receiver make the audio connections but remove the standard video cable Do not connect both an S video and a standard video cable to VIDEO at the same time or the picture performance will be unac
4. 13 1 READ INSTRUCTIONS safety and operating instructions should be read before the unit is operated RETAIN INSTRUCTIONS The safety and operating instructions should be retained for future reference HEED WARNINGS All warnings on the unit and in the operating instructions should be adhered to FOLLOW INSTRUCTIONS All operating and use instructions should be followed CLEANING Unplug this unit from the wall outlet before cleaning Do not use liquid cleaners or aerosol cleaners Clean only with a dry cloth ATTACHMENTS Do not use attachments not recommended by the product manufacturer as they may cause hazards WATER AND MOISTURE Do not use this unit near water for example near a bathtub washbowl kitchen sink laundry tub in a wet basement or near a swimming pool ACCESSORIES Do not place this product on an unstable cart stand tripod PORTABLE CART WARNING bracket or table The product may fall causing serious injury to symbol provided by RETAC a child or adult and serious damage to the product Use only DANGER with a cart stand tripod bracket or table recommended by the RISK OF DEATH SERIOUS manufacturer or sold with the product Any mounting of the PERSONAL INJURY OR e product should follow the manufacturer s instructions and EQUIPMENT DAMAGE should use a mounting accessory recommended by the manufacturer 83126A An appliance and cart combination should be moved with
5. To control a VCR Program the remote control to recognize the brand of your see Programming the remote control to operate your other VCR devices on page 18 The buttons shown a right will then control the VCR Press VCR first Be sure to use AAA size batteries Dispose of batteries in a designated disposal area Batteries should always be disposed of with the environment in mind Always dispose of batteries in accordance with applicable laws and regulations If the remote control does not operate correctly or if the operating range becomes reduced replace batteries with new ones When necessary to replace batteries in the remote control always replace both batteries with new ones Never mix battery types or use new and used batteries in combination Always remove batteries from remote control if they are dead or if the remote control is not to be used for an extended period of time This will prevent battery acid from leaking into the battery compartment POWER 0060 Input TV Power Channel Numbers CH RTN Channel Return Channel V t Volume TV Pic Size TV PAUSE zur STOP SKIP SKIPI SEARCH REW SEARCH VCR controls TOPMENU REC CLEAR TV VCR OOOO TOSHIBA CT 885 05 08 2005 10 13 AM gt c lt lt gt 5 gt To con
6. been set to optimize picture quality WOW TruBass To select your desired bass CLOCK To minimize any vertical bars or stripes visible expansion level HIGH LOW or on the screen background RED GREEN BLUE To adjust the color temperature of the PC Monitor screen Set to ON when you select the WXGA mode on the PC WXGA INPUT Resetting your picture audio adjustments in the PC mode The RESET function returns your picture quality adjustments to the following factory settings PICTURE menu AUDIO menu Brightness center 25 Bass ues center 25 Contrast max 50 Treble center 25 Ried center 25 Balance center 0 Green center 25 BIUS center 25 To reset your picture adjustments 1 Press TV to select the TV mode 2 Press MENU during PC mode 3 Press lt or gt to select the desired menu 4 Press A or V to highlight RESET and then press 39 J3U70221A E P37 40 39 OFF in PC mode Cc 2 gt j T i i Note If the remote control does not operate your TV press the TV button on the remote control and try again 05 08 2005 10 15 AM ml Appendix Appendix Troubleshooting Before calling a service technician please check the following table for a possible cause of the symptom and some solutions Symptom TV will not turn on No pic
7. 2 Press ENTER to highlight LABEL Press to enter a character in pes the first space Press the button seLect ADJUST ENTER SET repeatedly until the character you want appears on the screen Press ENTER Repeat step 8 to enter the rest of the characters If you would like a blank space in the label name you must choose 5 an empty space from the list of characters otherwise a dash will appear in that space Repeat steps 1 9 for other chan nels You can assign a label to each channel Press EXIT to return to normal viewing SELECT ENTER SET Note The character will change as below lt gt 0 9 lt gt A Z lt gt SPACE lt gt lt gt erase channel labels 1 7 2 E 3 S 4 LL 5 o gt m 97 5 7 2 J3U70221A E P25 28 Press TV to select the TV mode Select a channel with a label Press MENU then press or gt until the OPTION menu appears Press A or V to highlight CH LABEL Press to display the CH LABEL menu SET CLEAR will be highlighted Press lt or P to highlight CLEAR Press ENTER Repeat steps 1 7 to erase other channel labels 28 POWER o DOO PAUSE STOP SKIP SKIP SEARCH REW FF SEARCH C TOPMENU REC CLEAR TV VCR TOSHIBA CT 885 Note If the remote control d
8. CHRTN 10 Co VCR INPUT DISPLAY MUTE POWER TV Menu AV 4 Exit including the brightness contrast color tint and sharpness The qualities you choose will be stored automatically in your TV s memory so you can recall them at any time To adjust the picture quality OOOO C G3 D 1 Press TV to select the TV mode 2 Press MENU then press or to display the PICTURE menu 3 Press A or V until the item you want to adjust is highlighted MODE BRIGHTNESS CONTRAST COLOR TINT SHARPNESS i SELECT Selection 3 o gt E m S 4 gt COLOR TINT SHARPNESS We F zl 2 2 PICTURE SPORTS ADJUST 4 Press or to adjust the level 4 Pressing gt BRIGHTNESS darker lighter CONTRAST lower higher paler deeper reddish greenish softer sharper 5 Press EXIT to return to normal viewing J3U70221A E P31 36 34 34 Note If the remote control does not operate your TV press the TV button on the remote control and try again 05 08 2005 10 14 AM Using the CableClear feature CableClear reduces visible interference in your TV picture This is useful when receiving a broadcast with a weak signal especially a Cable channel or playing a video cassette or disc damaged by repeated use To turn on the CableClear feature 1 Pres
9. 1 Press TV to select the TV mode 2 Select the channel you want to add or erase If adding channels you must select the channel to add using the Channel Number buttons 3 Press MENU then press or P to display the SETUP menu LE Al 4 Press A or V to highlight ADD SETUP ERASE LANGUAGE ENGLISH CLOCK SET 12 00AM 5 Press or to select ADD or PESE sec Em ERASE whichever function you want perform 6 Repeat steps 1 5 for other channels you want to add or erase SELECT i amp ADJUST Changing channels To change to the next programmed channel Press Channel V on the TV or CH A V on the remote control To change to a specific channel programmed or Press the Channel Number buttons 0 9 and 100 on the remote control For example to select channel 125 press 100 2 5 23 J3U70221A E P17 24 23 INPUT DISPLAY MUTE OOOQ CU 2 3 Channel 6 Numbers TV Channel V Menu AY 4 PLAY PAUSE STOP SKIP SKIP SEARCH REW FF SEARCH TOPMENU REC CLEAR TV VCR TOSHIBA gt Co c lt lt In addition to cycling through your programmed channels the Channel V buttons will also cycle through the video input sources page 29 in the order illustrated below ANT programmed channel VIDEO1 VIDEO2 PC 5 HDMI lt gt ColorStream H
10. 3 023 031 049 Proscan 008 009 013 035 039 043 045 ae Hitachi 033 Radio Shack 022 023 030 047 058 Hughes 033 RCA 008 009 013 016 Zenith 027 For VCR Mode 2 VCR Admiral 049 Fuji 004 041 Marantz 005 006 007 012 Aiko 019 Funai 018 073 014 026 053 067 Aiwa 018 Garrard 018 Memorex 007 009 010 016 Akai 003 004 037 038 GE 001 002 009 040 018 034 049 063 039 058 069 042 048 056 065 066 068 075 Audiovox 010 Go Video 056 059 061 081 079 Bell amp Howell 007 068 Goldstar 005 010 014 054 MGA 020 028 039 Broksonic 008 017 056 065 067 MGN 056 Calix 010 Gradiente 018 065 Minolta 024 025 035 063 Carver 026 Harman Kardon 005 Mitsubishi 020 024 025 028 CCE 019 Hitachi 024 025 035 037 039 043 065 Citizen 009 010 011 012 042 063 070 080 Montgomery Ward 049 013 014 015 019 JBL 076 Motorola 049 057 073 JC Penney 005 006 007 008 MTC 009 046 061 Colortyme 005 009 010 023 024 Multitech 009 012 018 Craig 009 010 016 061 025 026 035 056 NEC 005 006 007 012 065 079 061 063 065 014 037 043 053 Curtis Mathes 001 005 009 012 Jensen 024 025 037 054 067 070 014 040 048 053 JVC 005 006 007 014 Nikko 010 056 057 037 043 062 063 Noblex 009 Daewoo 011 013 015 017 068 082 Optimus 010 049 065 018 019 057 078 Kenwood 005 006 007 012 Optonica 0
11. 3 Press A or V to highlight RESET and then press ELE od ud 21 65 PICTURE A CableClear COLOR TEMPERATURE cooL RESET gt 9 SELECT ADJUST 35 J3U70221A E P31 36 35 POWER OOOO DO CO G3 D DOD CHRTN 10 TV Menu AV lt gt Exit SKIP SKIP SEARCH REW FF SEARCH TOPMENU REC CLEAR TV VCR TOSHIBA CT 885 Note If the remote control does not operate your TV press the TV button on the remote control and try again 05 08 2005 10 14 AM Cc 2 i Adjusting the sound POWER Muting the sound Mute Press MUTE to temporarily turn off the sound While the sound is off Gb C3 the screen will display the word MUTE in the lower right hand corner C6 DOS CHRTN Display To restore the sound press MUTE again Selecting stereo SAP broadcasts Co The multi channel TV sound MTS feature provides high fidelity stereo sound MTS also can transmit a second audio program SAP contain ing a second language or other audio information Note The MTS feature is not available in VIDEO mode When the TV receives a stereo or SAP broadcast the word STEREO or SAP displays on screen every time you turn the TV on change the channel or press DISPLAY TV Menu AY lt gt To listen to stereo sound 1 Press TV to select the TV mode 2
12. Technics 072 GE 001 029 030 048 049 050 Techwood 075 Go Video 087 Philips 004 051 Toshiba 000 013 076 077 GPX 031 Pioneer 052 053 054 055 078 Hitachi 005 032 033 034 Proscan 001 056 Yamaha 079 080 081 035 Qwestar 057 058 Zenith 014 082 092 JVC 003 007 036 042 RCA 001 002 059 089 088 Portable DVD Brand Code Brand Code Brand Code Aiwa 093 Panasonic 024 096 099 RCA 098 Audiovox 094 095 HTIB Brand Code Brand Code Brand Code Lasonic 083 Panasonic 084 Venturer 085 For VCR and DVD Mode DVD VCR Combo Brand VCR Code DVD Code Brand VCR Code DVD Code Go Video 081 087 Samsung 084 090 JVC 082 088 Sanyo 085 091 RCA 083 089 Zenith 086 092 20 05 08 2005 10 13 AM Learning about the remote control INPUT selects the video input source page 29 DISPLAY displays status information on screen page 38 MUTE turns off the sound page 36 POWER turns the TV on and off CHANNEL NUMBERS allow direct access to channels page 24 Input Displ CH RTN Channel Return returns to the last viewed channel SES page 24 Channel TV selects TV mode Numbers CH A V cycles through programmed channels page 23 Channel A V VOL adjusts the volume level VCR selects VCR mode page 17 CBL SAT CBL SAT selects CBL SAT mode page 17 Sleep DVD selects DVD mode page 18 SLEEP programs the TV to turn off at a set time page 33 DVD Menu PIC SIZE cycles through the three picture sizes Natural TheaterW
13. commercial purposes as follows all parts are warranted against defects in materials or workmanship for a period of ninety 90 days after the date of original retail purchase DURING THIS PERIOD TCL WILL AT TCL S OPTION REPAIR OR REPLACE A DEFECTIVE PART WITH A NEW OR REFURBISHED PART WITHOUT CHARGE TO YOU YOU MUST DELIVER THE ENTIRE TELEVISION TO AN AUTHORIZED TCL SERVICE DEPOT YOU MUST PAY FOR ALL TRANSPORTATION AND INSURANCE CHARGES FOR THE TELEVISION TO AND FROM THE SERVICE DEPOT Owner s Manual and Product Registration Read this owner s manual thoroughly before operating this LCD Television Register your LCD Television online at www toshiba ca as soon as possible By registering your LCD Television you will enable TCL to bring you new products specifically designed to meet your needs and help us to contact you in the unlikely event a safety notification is required Failure to register your LCD Television does not diminish your warranty rights Your Responsibility THE ABOVE WARRANTIES ARE SUBJECT TO THE FOLLOWING CONDITIONS 1 You must retain your original bill of sale or provide other proof of purchase 2 All warranty servicing of this LCD TV must be made by an Authorized TCL Service Depot 3 The warranties from TCL are effective only if this LCD Television is purchased in Canada from an authorized TCL dealer and operated in Canada 4 Labour service charges for set installation setup adjustment of custome
14. Atlanta 063 078 079 080 084 087 091 092 086 089 091 096 088 098 101 105 096 098 Magnavox 072 096 Sears 095 Archer 065 092 097 099 Memorex 091 092 104 Signature 062 Cableview 064 094 Multi Canal 090 Signature 2000 096 Century 092 Novavision 101 Sprucer 081 085 Citizen 090 092 097 Panasonic 081 083 085 Starcom 069 082 087 096 Contec 083 085 086 088 Philco 087 103 104 093 098 Philips 066 067 068 070 Stargate 069 090 Diamond 093 072 073 074 075 Sylvania 095 100 Eagle 091 091 092 TeleView 090 GE 061 062 Pioneer 076 077 Texscan 100 Gemini 069 070 094 Proscan 061 062 Tocom 071 084 085 General Instruments 062 089 096 Radio Shack 092 097 099 U S Electronics 087 096 098 Hamlin 093 RCA 064 081 United Cable 082 Hitachi 062 095 096 Realistic 065 Universal 065 092 097 099 Jasco 097 Recoton 102 102 103 Samsung 077 090 Wards 096 Satellite Brand Code Brand Code Brand Code Alphastar 038 059 Hughes Network 019 Realistic 030 Chaparral 034 Systems Samsung 059 DISH Network 057 Intersat 048 Sony 014 055 Drake 020 040 044 046 Janeil 027 Star Choice 057 050 053 JVC 017 057 Star Trak 025 026 037 054 Echostar 018 041 051 Kenwood 029 STS 024 Express Vu 057 Magnavox 060 Toshiba 000 001 002 003 Fujitsu 027 Optimus 058 004 005 006 007 r GE 008 009 013 Pansat 036 052 020 031 056 General Instruments 010 011 012 022 Primestar 015 042 Uniden 021 028 030 032
15. Press MENU then press 4 or to display the AUDIO menu 3 Press A or V to highlight MTS 4 Press or to highlight STR stereo Notes n general you can leave your TV in stereo mode because the TV automatically outputs the type of sound being broadcast stereo or mono f the stereo sound is noisy select MONO to reduce the noise Exit Note A second audio program SAP can be heard only on those TV stations that offer it For example a station might broadcast music Ege ri as second audio program If you have SAP on you will see the current program on the MTS ae TREBLE screen but hear music instead of the STABLE SOUND OFF J H Y program s normal audio seLECT ADJUST However if you have SAP on and the station you are watching is not currently 5 Press EXIT to return to normal viewing broadcasting second audio program the To listen to a second audio program SAP station s normal audio will be output 1 Press TV to select the TV mode however occasionally there is no sound at all 2 Press MENU then press lt to display the AUDIO menu in SAP mode If this happens set the MTS 3 Press A or V to highlight MTS feature to STEREO mode 4 Press 4 or to highlight SAP The TV speakers will output the second audio program instead of normal audio 5 Press EXIT to return to normal viewing Adjusting the sound quality You can change
16. Selecting the color temperature 35 Resetting your picture adjustments 35 Adjusting the sound seee 36 Muting the sound 36 Selecting stereo SAP broadcasts 36 Adjusting the sound quality 36 Resetting your audio adjustments 37 Using the StableSound feature 37 Using the WOW surround sound feature 37 Selecting the HDMI audio input source 38 Adjusting the back lighting feature 38 Displaying on screen information 38 Auto power off aiite a reds 38 Understanding the Power Return feature 38 Picture Audio adjustments in the PC mode 39 Resetting your picture audio adjustment inthe PO mode niii rte 39 Appendix 40 Troubleshoot oett ttr 40 Specifications oce 41 Limited Canada 42 05 08 2005 10 13 AM 7 gt 9 5 The STARTING SETUP feature appears the first time you turn on the TV See page The volume and channel buttons on the top panel can be used as A W and
17. against voltage surges and built up static charges Section 810 of the National Electrical Code NEC ANSI NFPA 70 provides information with respect to proper grounding of the mast and supporting structure grounding of the lead in wire to an antenna discharge unit size of grounding conductors location of antenna discharge unit connection to grounding electrodes and requirements for the grounding electrode 5 5 EXAMPLE OF ANTENNA x GROUNDING AS PER THE ANTENNA LEAD IN WIRE NATIONAL ELECTRICAL CODE GROUND CLAMP NEC NATIONAL ELECTRICAL CODE ANTENNA DISCHARGE UNIT G2898A NEC SECTION 810 20 ELECTRIC SERVICE EQUIPMENT GROUNDING CONDUCTORS D NEC SECTION 810 21 POWER SERVICE GROUNDING 224 GROUND CLAMPS ELECTRODE SYSTEM NEC ART 250 PART 18 SERVICING Do not attempt to service this unit yourself as opening or removing covers may expose you to dangerous voltage or other hazards Refer all servicing to qualified service personnel For example When the power supply cord or plug is damaged If liquid has been spilled or objects have fallen into the unit If the unit has been exposed to rain or water If the unit does not operate normally by following the operating instructions Adjust only those controls that are covered by the operating instructions as an improper adjustment of other controls may result in damage and will often require extensive work
18. any province of Canada THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH MAY VARY FROM PROVINCE TO PROVINCE IN CANADA SOME PROVINCES OF CANADA DO NOT ALLOW LIMITATIONS ON THE DURATION OF AN IMPLIED WARRANTY WHEN AN ACTION MAY BE BROUGHT OR THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES THEREFORE THE ABOVE PROVISIONS MAY NOT APPLY TO YOU UNDER SUCH CIRCUMSTANCES 0305 05 08 2005 10 15 AM J3U70221A E P41 44 43 43 __ gt 5 e 5 x 05 08 2005 10 15 AM 1 __ i l TOSHIBA OF CANADA LIMITED 191 McNabb Street Markham Ontario L3R 8H2 TEL 905 470 5400 Service Centers TORONTO 191 McNABB STREET MARKHAM ONTARIO L3R 8H2 CANADA TEL 905 470 5400 MONTREAL 18050 TRANS CANADA KIRKLAND QUEBEC H9J 4A1 CANADA TEL 514 390 7766 VANCOUVER 22171 FRASERWOOD WAY RICHMOND B C V62 105 CANADA TEL 604 303 2500 CableClear ColorStream TheaterWide and StableSound are registered trademarks of Toshiba America Consumer Products L L C GameTimer is a trademark of Toshiba America Consumer Products L L C Printed in Thailand J3U70221A E P41 44 44 05 08 2005 10 15 AM
19. approved wall bracket to wall mount this television could result in serious bodily injury and or property damage For more information call TCL s Customer Service Department at 1 800 268 3404 NOTE TO CATV INSTALLERS This is a reminder to call the CATV system installer s attention to Article 820 40 of the U S NEC which provides guidelines for proper grounding and in particular specifies that the cable ground shall be connected to grounding system of the building as close to the point of cable entry as practical For additional antenna grounding information see item 17 on page 4 Child Safety It Makes A Difference Where Your TV Stands Congratulations on your purchase As you enjoy your new TV keep these safety tipi in mind The Issue Ifyou are like most consumers you have a TV in your home Many homes in fact have more than one TV U The home theater entertainment experience is a growing trend and larger TVs are popular purchases however they are not always supported on the proper TV stands we U Sometimes TVs are improperly secured or inappropriately situated on dressers bookcases shelves desks audio speakers chests or carts As a result TVs may fall over causing unnecessary injury Toshiba Cares The consumer electronics industry is committed to making home entertainment enjoyable and safe The Consumer Electronics Association formed the Home Entertainment Support Saf
20. buttons while the TV menu is Remote control POWER 0000 S Exploring your new TV You can operate your TV by using the buttons on the top panel or the remote control The side and back panels provide the 5 inputs to connect other equipment to your TV 4 p a A EF gt 22 for details S Top panel 4 QU NL displayed on screen Approx 5 Approx 10 Right side Front You can adjust the angle of the TV screen 5 forward or 10 backward from vertical Hold the Power indicator Remote sensor base of the TV while adjusting the angle Left side Side panel HEADPHONE 6 VIDEO 2IN 2 PCIN i S DC IN VIDEO 1 IN ColorStream HDMI IN HD IN J3U70221A E P02 10 8 Owa C82 C6 2 e PLAY STOP PAUSE SKIP SKIP SEARCH REW FF SEARCH TOPMENU REC CLEAR TV VCR 05 08 2005 10 13 AM TOSHIBA CT 885 Selecting a location for the TV Place the TV on the floor or on a sturdy platform in a location where light does not directly hit the screen Place the TV far enough from the walls to allow proper ventilation Inadequate ventilation may cause overheating which may damage the TV Connecting your TV If you haven t connected ele
21. by a qualified technician to restore the unit to its normal operation e If the unit has been dropped or the cabinet has been damaged f When the unit exhibits a distinct change in performance this indicates a need for service 19 REPLACEMENT PARTS When replacement parts are required be sure the service technician uses replacement parts specified by the manufacturer or those that have the same characteristics as the original part Unauthorized substitutions may result in fire electric shock or other hazards 20 SAFETY CHECK Upon completion of any service or repairs to this unit ask the service technician to perform safety checks to determine that the unit is in proper operating condition 21 HEAT The product should be situated away from heat sources such as radiators heat registers stoves or other products including amplifiers that produce heat J3U70221A E P02 10 4 05 08 2005 10 13 AM 1 __ Be IMPORTANT SAFEGUARDS 22 CONNECTING When you connect the product to other equipment turn off the power and unplug all of the equipment from the wall outlet Failure to do so may cause product damage Read the owner s manual of the other equipment carefully and follow the instructions when making any connections 23 HEADPHONES When you use headphones keep the volume at a moderate level Using headphones continuously at a high volume may cause hearing damage 24 LCD Do not press on or allow anythi
22. enter the code within 10 seconds from step 3 or if you enter the wrong code this operation is canceled 4 Point the remote control at the cable TV converter satellite receiver VCR or DVD player and press POWER to test the code f the device responds you entered the correct code f the device does not respond repeat steps 1 4 using another code 5 Press TV to control the TV For future reference write down the codes you used Cable TV converter satellite receiver code VCR code DVD player code J3U70221A E P17 24 18 18 POWER INPUT DISPLAY MUTE TOSHIBA cT 885 Notes When shipped from the factory the remote Display Channel Numbers TV VCR DVD CBL SAT control is set to operate your TV e Each time you replace the batteries you must reprogram the remote control Some newer VCRs are capable of working on either of two remote codes These VCRs have a switch labeled VCR1 VCR2 If your VCR has this kind of switch and does not respond to any of the codes for your VCR set the switch to the other position VCR1 or VCR2 and reprogram the remote control 05 08 2005 10 13 AM ENENENENDSE 1 1 Cable TV converter satellite receiver VCR and DVD player code tables For CBL SAT Mode CABLE Box Brand Code Brand Code Brand Code ABC 061 062 063 082 Jerrold 062 069 071 082 Scientific
23. features 24 Adjusting the channel 24 Switching between two channels 24 Programming your favorite channels 24 Using the LOCKS menu 25 Selecting a 25 Locking channels iones 26 Locking the video inputs 26 Setting the 27 Using the panel lock feature 27 Labeling channels 28 Selecting the video input source 29 Labeling the video input sources 29 Setting the clock ienei ennnen 29 Setting the ON timer sssrinds 30 Viewing the wide screen picture formats 480i and 480p signals only eee 31 Selecting the cinema mode 32 Using the ASPECT feature 32 Setting the sleep 33 Using the closed caption feature 33 Adjusting the picture 34 Selecting the picture mode 34 Adjusting the picture quality 34 Using the CableClear feature 35
24. long period of use This is not a malfunction degrees to the monitor E When the unit is not in use turn off the power E if you do not use the unit for a long period the unit may not function properly in the future Turn on and use the unit occasionally Notes on locating the unit E When you place this unit near a TV radio or VCR the playback picture may become poor and the sound may be distorted In this case place the unit away from the TV radio or VCR E To avoid damage to this product never place or store the TV in direct sunlight hot humid areas or areas subject to excessive dust or vibration E Always place the TV on the floor or a sturdy level stable surface that can support the weight of the unit Use a sturdy tie between the TV s rear hooks and the rear wall pillar etc or screw the TV to the stand using the TV s rear screw hole or a safety band see illustration Wall TV Stand Safety Band J3U70221A E P02 10 6 05 08 2005 10 13 AM atgersli CUO cc 2 IMPORTANT SAFEGUARDS 3 Precautions 6 Exploring your new 8 Selecting a location for the TV 9 Connecting your TV esee 9 Connecting a VCR sssini ienesa asai 9 Connecting cable converter box or antenna 10 Connecting a DVD player satellite receiver and a
25. menu SET CLEAR will be highlighted LEE o S FAVORITE CH CH002 CLEAR TV CABLE SETUP CH RETURN 8 9 ENTER SET 6 Press lt or highlight SET and press ENTER 7 Press EXIT to return to normal viewing 8 Repeat steps 1 7 for up to 12 channel To select your favorite channels Press the FAV buttons on the remote control to select your favorite channels The FAV A buttons will not work until you have programmed your favorite channels To clear your favorite channels Press TV to select the TV mode Select a channel you want to clear Press MENU then press lt or to display the OPTION menu Press A or V to highlight FAVORITE CH Press gt to display the FAVORITE CH menu SET CLEAR will be highlighted Press or highlight CLEAR gu Ni 5 FAVORITE CH CH002 SET TV CABLE SETUP CH 09 RETURN gt SELECT ADJUST ENTER CLEAR Press ENTER until 0 replaces the channel number you want to erase Press EXIT to return to normal viewing Repeat steps 1 8 for the other channels J3U70221A E P17 24 24 POWER aG 4G C6 Channel Numbers CH RTN TV Channel A V Menu Enter AV lt gt FAV VA Exit TOPMENU REC CLEAR TV VCR TOSHIBA CT 885 Note If the remote control does not operate yo
26. of your entertainment needs in the future Safety Precautions WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER OR BACK NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance servicing instructions in the literature accompanying the appliance CAUTION To reduce the risk of electric shock do not use the polarized plug with an extension cord receptacle or other outlet unless the blades can be inserted completely to prevent blade exposure WARNINGS Handling the cord on this product or cords associated with accessories sold with this product will expose you to lead a chemical known to the State of California to cause birth defects or other reproductive harm Wash hands after handling WARNING Always use a Toshiba approved wall bracket to wall mount this television The use of any wall bracket other than a Toshiba
27. press the TV button on the remote control and try again 26 J3U70221A E P25 28 26 05 08 2005 10 14 AM To unlock the video inputs Press TV to select the TV mode Press MENU then press lt or display the LOCKS menu Press A or V to display the password entering mode Use the Channel Number buttons 0 9 to enter your password then press ENTER The LOCKS menu appears 5 Press or V to highlight VIDEO LOCK and press or to highlight OFF 6 Press EXIT to return to normal viewing Setting the With the GameTimer feature you can automatically activate the VIDEO LOCK feature VIDEO setting to set a time limit for playing a video game 30 60 90 or 120 minutes To set up the GameTimer Press TV to select the TV mode Press MENU then press lt or P to display the LOCKS menu Press A or V to display the password entering mode Use the Channel Number buttons 0 9 to enter your password then press ENTER The LOCKS menu appears Press A or V to highlight GAME TIMER Press or to select a time limit 30 minutes 60 minutes 90 minutes 120 minutes or OFF 7 Press EXIT to return to normal viewing After the GameTimer is programmed the display will appear briefly every ten minutes to remind you that GameTimer is operating When the programmed time is reached the TV will change channels automatically and enter VIDEO LOC
28. 005 10 13 AM J3U70221A E P11 16 15 Connecting an HDMI or a DVI device to the HDMI input The HDMI input on your TV receives digital audio and uncompressed digital video from an HDMI device or uncompressed digital video from a DVI device This input is designed to accept HDCP program material in digital form from EIA CEA 861 861B compliant consumer electronic devices such as a set top box or DVD player with HDMI or DVI output The HDMI input is designed for best performance with high definition video signals It will accept and display 480i 480p 720p and 1080 signals Note The HDMI jack is not intended for connection to and should not be used with a personal computer For PC connection see page 16 To connect an HDMI device you will need one HDMI cable type A connector For proper operation it is recommended that you use as short an HDMI cable as possible You should not encounter difficulty if you use an HDMI cable that is shorter than 16 4 ft 5m HDMI cable transfers both video and audio Separate analog audio cables are not required see illustration below You must set the HDMI audio input setting to HDMI in the AUDIO menu see page 38 Some CDVs Video CDs may not output digital audio signals In that case you may hear sound by connecting analog audio cables If you do use analog audio cables for this reason you will need to set the HDMI audio input setting to DVI to he
29. 2m one pair of standard analog audio cables An HDMI to DVI adapter cable transfers only video Separate analog audio cables are required see illustration below You must set the HDMI audio input setting to DVI in the AUDIO menu see page 38 DVI device VIDEO AUDIO L R 05 08 2005 10 13 AM 9 2 5 1 Qo 5 lt lt gt LI gt gt c 5 o Connecting a PC Personal Computer Before you connect this TV to your PC change the adjustment of your PC s Resolution and Refresh rate See Monitor Display modes at right Connect one end of a male to male VGA cable to the video card of the computer and the other end to the VGA connector PC at the side of the TV Fix the connectors firmly with the screws on the plug In case of a Multimedia computer connect the audio cables to the audio outputs of your Multimedia computer and to the AUDIO L and R connectors of the PC IN jacks of the TV Set the video input source to PC mode see Selecting the video input Source on page 29 and Picture Audio adjustments in the PC mode on page 39 The TV can be used as a computer monitor TV side panel HEAD PHONE Power source Power connection To use AC power 1 Connect the AC cord to the AC adapter You will need one VGA cable Monitor Display modes MODE Resolutio
30. 31 Daytron 078 014 037 043 053 Orion 054 057 062 065 Denon 063 068 071 068 072 Dimensia 001 048 Kodak 010 Panasonic 036 045 046 057 Electrohome 010 020 065 LG 010 061 072 079 Emerson 003 008 010 011 Lloyds 053 073 079 Pentax 012 024 025 035 017 018 020 028 Logik 061 042 053 063 039 054 057 062 LXI 010 Pentex Research 014 065 068 072 Magnasonic 061 065 078 Philco 026 027 063 Fisher 007 016 021 022 Magnavox 026 027 034 044 Philips 026 031 044 057 023 057 064 068 057 061 072 Pioneer 006 024 043 055 070 071 079 J3U70221A E P17 24 19 05 08 2005 10 13 AM gt 5 gt i J3U70221A E P17 24 VCR Continued Brand Code Brand Code Brand Code Portland 012 013 015 007 009 016 054 Tashiko 010 001 002 048 064 068 071 075 Tatung 037 Proton 061 079 085 Teac 018 029 037 Quasar 045 Scott 008 011 017 028 Technics 036 Radio Shack 010 031 065 030 057 065 072 Teknika 010 018 065 Radio Shack 007 009 010 016 Sears 007 010 016 021 Toshiba 000 011 021 023 Realistic 018 020 021 022 022 023 024 025 024 028 030 039 031 049 035 053 057 063 057 074 078 079 Radix 010 064 065 068 071 Totevision 009 010 065 RCA 001 002 003 009 075 079 Unitec 073 024 025 029 035 Sharp 013 020 031 049 Unitech 009 040 0
31. 4 AM gt H i gt 5 oy o Starting setup The STARTING SETUP feature appears the first time you turn on the TV and helps you select the menu language specify the TV CABLE setting and program channels automatically IMPORTANT Make sure that the antenna or cable TV system connection is made 1 Press TV to select the TV mode 2 Press POWER to turn on the TV The starting setup function begins and the language setup menu appears on the screen Press A or V to select your desired language then press ENTER 3 Press A or V to select TV or CABLE then press ENTER BS 4 Press A or W to select START then press ENTER If you select CANCEL and press ENTER the STARTING SETUP stops and changes to the TV screen 5 Now the AUTO SETUP starts After the starting setup is com pleted the TV channel appears on the screen f you press the EXIT button in the process of AUTO SETUP the STARTING SETUP stops and changes to the TV screen LANGUAGE LANGUE IDIOMA SELECT ENTER SET After you have installed the batteries and programmed the remote control you need to set some preferences on the TV using the menu system You can access the menu system with the buttons on the remote control When you make a menu selection your changes occur immedi ately You do not have to press MENU or EXIT to see your changes After one minute the menu screen w
32. 4 or 10 highlight OFF 27 J3U70221A E P25 28 27 Notes Interactive video games that involve shooting a gun type of joy stick at an on screen target may not work on this TV To deactivate the GameTimer set the VIDEO LOCK to OFF see Locking the video inputs page 26 POWER 6 e C3 Channel Ce Numbers TV I Menu Enter AV lt gt Exit TV top panel numum numum gum VOLUME Cc 5 2 0 T t o Lcd 1 7 Note If the remote control does not operate your TV press the TV button on the remote control and try again 05 08 2005 10 14 AM __ 1 Labeling channels Channel labels appear above the channel number display each time you turn on the TV select a channel or press the DISPLAY button You can choose any four characters to identify a channel To create channel labels 1 2 3 N 10 e 11 Press A or V to highlight CH LABEL Press gt to display the CH LABEL Press TV to select the TV mode Select a channel you want to label C8 of 8 0 A Press MENU then press 4 or P until the OPTION menu appears PAVORITE VIDEO LABEL FF SELECT ADJUST menu SET CLEAR will be high lighted Press 4 to highlight SET then 0 2 x re press ENTER cH LABEL
33. 42 045 048 051 060 066 Vector Research 005 006 011 012 055 056 063 071 Shintom 004 025 032 061 053 083 Signature 049 Video Concepts 005 006 011 012 Realistic 007 009 010 011 Signature 2000 075 039 053 016 018 020 021 Singer 047 061 Wards 009 010 011 016 022 031 049 051 Sony 004 032 033 041 018 020 024 025 056 060 065 075 052 058 070 074 031 035 049 051 079 076 077 080 056 057 060 065 Ricoh 047 STS 035 066 079 Runco 034 Sylvania 018 026 027 028 White Westinghouse 073 Samsung 009 011 038 056 044 072 XR 1000 018 073 084 Symphonic 018 051 053 073 Yamaha 005 006 007 014 Sansui 006 037 043 061 079 037 053 Tandy 007 Zenith 004 032 034 041 047 069 086 TV VCR Combo Brand Code Brand Code Brand Code Action 078 Precision 078 Toshiba 057 GE 059 062 Quasar 065 Zenith 065 Goldstar 065 Realistic 079 Totevision 009 010 065 Panasonic 065 Sony 074 For DVD Mode DVD Brand Code Brand Code Brand Code Aiwa 006 015 Kenwood 037 Sampo 060 016 017 008 009 Samsung 061 062 086 090 BOSE 097 Magnavox 004 038 Sansui 073 Broksonic 018 Memorex 039 Sanyo 063 091 Clarion 019 Mintek 040 Sharp 064 067 Classic 020 NAD 026 Sherwood 074 Daewoo 021 Nakamichi 041 Sony 011 012 065 066 Denon 022 023 024 025 Norcent 043 068 069 070 Emerson 026 027 Onkyo 044 Sylvania 027 Fisher 028 Oritron 058 Teac 071 Funai 027 Panasonic 010 045 046 047
34. ColorStream HD jacks and HDMI jacks can be used with Progressive 480p 720p and Interlaced 480i 1080i scan systems If your DTV receiver does not have compo nent video use the S video and standard audio connections instead Do not connect both an S video and a standard video cable to VIDEO at the same time or the picture performance will be unacceptable The unauthorized recording use distribution or revision of television programs videotapes DVDs and other materials is prohibited under the Copyright Laws of the United States and other countries and may subject you to civil and criminal liability 05 08 2005 10 13 AM Oo 2 5 1 ie 2 lt lt gt gt gt 22 c 5 o J3U70221A E P11 16 Connecting a camcorder This connection allows you to watch videos recorded on a camcorder VHS Camcorder S VIDEO VIDEO TV side panel S VHS Camcorder 14 You will need one set of standard AV cables You will need one S video cable one pair of standard audio cables Note For better picture quality if your camcorder has S video you can use an S video cable plus the standard audio cables instead of a standard video cable Do not connect both a standard video cable and an S video cable at the same time or the picture performance will be unacceptable 05 08 2
35. D Note If the remote control does not operate your TV press the TV button on the remote control and try again 05 08 2005 10 14 AM 7 A E o gt E m 92 5 7 gt Using the TV s features Adjusting the channel settings Switching between two channels You can switch between two channels without entering an actual channel number each time To switch between two channels 1 Press TV to select the TV mode 2 Select the first channel you want to view 3 Select a second channel using the Channel Number buttons 0 9 100 4 Press CH RTN The previous channel will be displayed Each time you press CH RTN the TV will switch back and forth between the two channels Programming your favorite channels You can preset up to 12 of your favorite channels using the Favorite Channel Programming feature Because this feature scans through only your favorite channels it allows you to skip other channels you do not normally watch You can still use Channel V to scan through all the channels you programmed in the TV s memory To program your favorite channels 1 Press TV to select the TV mode 2 Select a channel you want to program 3 Press MENU then press lt to display the OPTION menu 4 Press A or V to highlight FAVORITE CH OPTION ON TIMER FAVORITE CH CH LABEL VIDEO LABEL SELECT ADJUST 5 Press P to display the FAVORITE CH
36. K mode c Ea o 218 Locks gt CH LOCK VIDEO LOCK OFF GAME TIMER OFF 2111 30 60 90 120 SELECT ADJUST Using the panel lock feature You can lock the top panel buttons to prevent your settings from being changed accidentally by children for example When the panel lock is set to ON all control buttons on the TV top panel except POWER do not operate To lock the panel Press TV to select the TV mode Press MENU then press lt or to display the LOCKS menu Press A or V to display the password entering mode Use the Channel Number buttons 0 9 to enter your password then press ENTER The LOCKS menu appears RON 5 Press A or V to highlight PANEL LOCK and press 4 tohighlight 0 cg ey eo ON LOCKS If a button on the top panel is PANEL LOCK ON NEW PASSWORD pressed the message NOT AVAILABLE appears To unlock the panel Press and hold the VOLUME button on the TV top panel for about 10 seconds until the message PANEL LOCK OFF appears on Screen SELECT ADJUST You also can unlock the panel using the menus 1 Press TV to select the TV mode 2 Press MENU then press lt or to display the LOCKS menu 3 Press or V to display the password entering mode 4 Use the Channel Number buttons 0 9 to enter your password then press ENTER The LOCKS menu appears 5 Press A or V to highlight PANEL LOCK and then press
37. L MONO i Y PB PR L MONO R S SVIDEO L AUDIO COLOR STREAM HD LaupIo VIDEO VIDEO 1 IN from cable box or antenna Stereo VCR IN 9 9 9 VIDEO IN from ANT OUT to TV CH3 CH4 OUT L R AUDIO J3U70221A E P02 10 9 Note To prevent equipment damage do not plug in any power cords until you have finished connecting all equipment You will need two coaxial cables one set of standard A V cables Note If using a mono connect L Mono to VCR Audio OUT using only one audio cable For better picture quality if your VCR has S video you can use an S video cable instead of the standard video cable Do not connect a standard video cable and an S video cable to VIDEO 1 simultaneously The unauthorized recording use distribu tion or revision of television programs videotapes DVDs and other materials is prohibited under the Copyright Laws of the United States and other countries and may subject you to civil and criminal liability 05 08 2005 10 13 AM 9 2 5 1 Qo 2 lt lt Connecting cable converter box antenna This television has an extended tuning range and can tune most cable channels without using a cable company supplied converter box Some cable companies offer premium pay channels in which the signal is scrambled Descrambling these sig
38. LER o 8 display the OPTION menu QUEM 3 Press A or V to highlight VIDEO LABEL 4 Press to display the VIDEO LABEL menu 5 Press A or V to highlight the video Source you want to label 6 Press 4 or gt to select the desired label for that input source YipEoz HL 7 Press EXIT to return to normal viewing Setting the clock You must set the clock before you can program the ON timer To set the clock Example 8 30 AM A 21 6 1 Press TV to select the TV mode 2 Press MENU then press or P to zm SELECT ADJUST VIDEO LABEL SELECT ADJUST display the SETUP menu LANGUAGE ENGLISH 3 Press A or V to highlight CLOCK weer Viste SET ADD 1 ERASE ADD 4 Press to highlight the hour seLecT ADJUST position 5 Press A or V to set the hour then press to highlight the minute SETUP position LANGUAGE ENGLISH 6 Press A or V to set the minutes TERRE e H PR RAM then press EXIT to return to normal ADD KERASE ADU viewing 8 ADJUST J3U70221A E P29 29 Please note the following regarding the HDMI source selection The HDMI IN jack is not intended for connection to and should not be used with a PC personal computer See Connecting an HDMI or a DVI device to the HDMI input on page 15 and Connecting a PC on page 16 for details POWER INPUT DISPLAY MUTE C4 C55 Ce TV Menu AY 4 Exit SEARCH REW FF SEA
39. OCUS To turn on or off the vocal emphasis effect DYO e TruBass To select your desired bass expansion level HIGH LOW or OFF use Ea Ti zd 2 5 AUDIO TV Menu o 5 2 E T t fb D 7 AV lt gt 585 ON aa FOCUS OFF OFF HDMI gt amp SELECT amp ADJUST 5 Press or to adjust the item Note If the remote control does not operate your TV press the TV button on the remote control and try again WOW SRS and symbol are trademarks of SRS Labs Inc WOW technology is incorporated under license from SRS Labs Inc 37 J3U70221A E P37 40 37 05 08 2005 10 15 AM 1 __ Bee 1 3 o gt E p 92 gt Selecting the HDMI audio input source See page 15 for details on connecting an HDMI or a DVI device to the TV s HDMI input If you connect a DVI device to hear audio you must also connect the analog audio cables to the HDMI audio IN jacks see page 15 Set the HDMI audio input setting to DVI with this connection If you connect an HDMI device and play media with digital audio output to hear digital audio set the HDMI audio input setting to HDMI with this connection If you connect an HDMI device but play media with analog audio output for example certain CDVs do not output digital audio t
40. RCH TOPMENU REC CLEAR TV VCR TOSHIBA CT 885 o gt 0 E o T o rm iv Note If the power source for the TV is interrupted for example the power cord is unplugged or a power failure occurs you will need to reset the clock Note If the remote control does not operate your TV press the TV button on the remote control and try again 05 08 2005 10 14 AM Setting the ON timer This feature allows you to program the TV to turn on automatically at a set time If you program the ON TIMER to DAILY the TV will turn on every day at the same time to the same channel until you clear the ON TIMER To set the on timer Example Turning on the TV to channel 012 at 6 30 AM DAILY 1 To cancel the on timer 3 o gt E p 92 gt J3U70221A E P30 Press A or V to set the desired hour Set the desired minutes and channel Press TV to select the TV mode Set the clock if you have not already done so see above Press MENU then press lt or to display the OPTION menu Press A or V to highlight ON TIMER Press or P to highlight SET then press ENTER The ON TIMER menu appears Press P to set the time then press P Eu NE 6 ON TIMER ON TIMER gt CH002 CLEAR RETURN gt SELECT ADJUST as in ste
41. __ __ Bee TOSHIBA Owner s MANUAL LCD Color Television Owner s Record The model number and serial number are on the back of your TV Record these numbers in the spaces below Refer to these numbers whenever you communicate with your Toshiba dealer about this TV 2 i g 5 Model number Serial number _________ 2005 TOSHIBA CORPORATION All Rights Reserved J3U70221A E Cover 05 08 2005 10 12 AM Oo 9 5 5 2 E 5 Co lt c m lt IJI S AL 94 Buisn ALl 1no dn x pu ddy 5 5 J3U70221A E P02 10 2 Always read and understand the PRODUCT WARNINGS and USER DIRECTIONS that are contained in this manual before attempting to use your television to help ensure its safe use Always store this manual near your television for convenient future reference Dear Customer Thank you very much for purchasing this Toshiba television You must carefully read and understand all of the safety instructions contained in this manual before you attempt to use this product in order to avoid potential hazards that could cause bodily injury or property damage or could damage your Television We hope that you are completely satisfied with your Toshiba television and that it will give you long and enjoyable service We look forward to providing you with additional Toshiba products to serve all
42. an be used with Progressive 480p 720p and Interlaced 480i 1080i scan systems A 1080 i signal will provide the best picture performance The unauthorized recording use distribu tion or revision of television programs videotapes DVDs and other materials is prohibited under the Copyright Laws of the United States and other countries and may subject you to civil and criminal liability 05 08 2005 10 13 AM Connecting a DTV receiver set top box with ColorStream component video and a VCR This connection allows you to watch DTV digital TV VCR and TV programs and record DTV and TV programs Your TV has ColorStream component video inputs Connecting your TV to a DTV receiver with component video can greatly enhance picture quality and realism From Antenna Stereo VCR 000 IN from ANT CH3 CH4 TV back panel j LIMONO R Y MONO R PR oi VIDEO LAUDIO I COLOR STREAM HD LAUDIO I IN Dc IN ana VIDEO 1 IN um T C 5 1 SFG 69 1 c IT T From DTV Antenna pen em 1 DTV Receiver with Component video 13 J3U70221A E P11 16 13 You will need three coaxial cables two sets of standard A V cables one set of standard audio cables one set of component video cables Note For HDMI connection see page 15 The
43. ar the analog audio see page 38 Note If you connect an HDMI device and analog audio cables and play media with digital audio output to hear digital audio you must set the HDMI audio input setting to HDMI page 38 HDMI device oo oO TV back panel 16906000000 HDMI the HDMI logo and High Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC 15 1 HDMI High Definition Multimedia Interface 2 DVI Digital Video Interface 3 HDCP High bandwidth Digital Content Protection 4 EIA CEA 861 861B compliance covers the transmission of uncompressed digital video with high bandwidth digital content protection which is being standardized for reception of high definition video signals Because this is an evolving technology it is possible that some devices may not operate properly with the TV To ensure that the HDMI or DVI device is reset prop erly it is recommended that you follow these proce dures When turning on your electronic components turn on the TV first and then the HDMI or DVI device When turning off your electronic components turn off the HDMI or DVI device first and then the TV To connect a DVI device you will need one HDMI to DVI adapter cable HDMI type A connector For proper operation the length of an HDMI to DVI adapter cable should not exceed 9 8 ft 3m The recommended length is 6 6 ft
44. care Quick stops excessive force and uneven surfaces may cause the appliance and cart combination to overturn VENTILATION Slots and openings in the cabinet back or bottom are provided for ventilation and to ensure reliable operation of the unit and to protect it from overheating These openings must not be blocked or covered The openings should never be blocked by placing the unit on a bed sofa rug or other similar surface This unit should never be placed near or over a radiator or heat source This unit should not be placed in a built in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer s instructions have been adhered to POWER SOURCE This unit should be operated only from the type of power source indicated on the rating plate If you are not sure of the type of power supply to your home consult your appliance dealer or local power company GROUNDING OR POLARIZATION Wide plug S This unit is equipped with a polarized alternating current line plug a plug having one blade wider than the other This plug will fit into the power outlet only one way This is a safety feature If you are unable to insert the plug fully into the outlet try reversing the plug If the plug should still fail to fit contact your electrician to replace your obsolete outlet POWER CORD PROTECTION gt e Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed u
45. ceptable The unauthorized recording use distribu tion or revision of television programs videotapes DVDs and other materials is prohibited under the Copyright Laws of the United States and other countries and may subject you to civil and criminal liability PR JMON L MONO R COLOR STREAM HD LAUDIO IN 11 J3U70221A E P11 16 11 05 08 2005 10 13 AM Oo 2 5 1 7 5 lt lt 2 gt gt 22 c o o Connecting a DVD player with ColorStream component video and a VCR This connection allows you to watch DVD VCR or TV programs and record TV programs You can record from one source while watching a program from another source Your TV is capable of using ColorStream component video Connecting your TV to a component video compat ible DVD player such as a Toshiba DVD player with ColorStream can greatly enhance picture quality and performance DVD player with Component video COMPONENT VIDEO M PB 0 0 S VIDEO L AUDIO I TV back panel ET From antenna Stereo VCR IN from ANT OUT to TV CH3 CH4 12 J3U70221A E P11 16 12 You will need two coaxial cables one set of standard A V cables one set of component video cables one pair of standard audio cables Note The ColorStream HD jacks c
46. ctronic equipment before or you have been frustrated in the past you may wish to read this section Cables are not supplied e A coaxial cable is the standard cable that comes in from your antenna or cable converter box Coaxial cables use F connectors Standard A V audio video cables are usually color coded accord ing to use yellow for video and red and white for audio The red audio cable is for the stereo right channel and the white audio cable is for the stereo left or mono channel If you look at the rear panel of the TV you will see that the terminals are color coded in the same manner as the cables S video cables provide better picture performance than standard video cables S video cables can only be used with S video compatible components Component video cables provide better picture performance than S video cables Component video cables can only be used with component video compatible components HDMI High Definition Multimedia Interface cable is for use with video equipment that has HDMI output see page 15 e e 00 5 Coaxial Cable Cable D D AUDIO Cables Component video ables D pi i Cable HDMI able Connecting a VCR This connection allows you to watch local channels and video programs play or record on the VCR while watching TV and record from one channel while watching another channel TV back panel
47. d Lo AUDIO TV Menu A WOW SRS 3D Focus AY lt gt SELECT ADJUST Using the StableSound feature The StableSound feature limits the highest volume level to prevent extreme changes in volume when the signal source is changed To turn on the StableSound feature 1 Press TV to select the TV mode 2 Press MENU then press lt or to display the AUDIO menu 3 Press A or V to highlight STABLE SOUND 4 Press or to highlight ON ud Io AUDIO MTS STEREO 25 BASS TREBLE BALANCE STABLE SOUND v SELECT ADJUST To turn off the StableSound feature Highlight OFF in step 4 above Using the WOW surround sound feature Notes If the broadcast is monaural the SRS 3D WOW is a special combination of SRS Labs audio technologies that effect will not work creates a thrilling surround sound experience with deep rich bass The headphone jack do not output any of from stereo sound sources Your TV s audio will sound fuller richer and the WOW audio features wider WOW consists of three features SRS 3D FOCUS and TruBass To adjust the WOW feature 1 Press TV to select the TV mode Ce 2 Select STEREO mode see selecting stereo SAP broadcasts on page 36 C9 3 Press MENU then press 4 or to display the AUDIO menu 4 Press w or A to highlight the desired WOW feature you want to adjust e SRS 3D To turn on or off the surround sound effect F
48. e blocked by CH LOCK feature or erased with the add erase feature Check the VIDEO LOCK feature The station may have broadcast difficulties e Use a highly directional outdoor antenna The station may have broadcast difficulties Try another channel Try another channel Adjust the TINT and or COLOR in the PICTURE menu Select OFF in the Closed Caption menu to turn off the Closed Caption Text mode Make sure the MTS feature is set properly AUDIO menu Make sure the TV CBL SAT VCR DVD mode is set properly Remove all obstructions between the remote control and the TV The remote control batteries may be dead Replace the batteries Check the PANEL LOCK feature If the TV is connected to an external A V device e g DVD player video game system set top box etc always try to use the ColorStream video jacks and corresponding audio jacks or the HDMI input if available for connection to such external A V device This will reduce the amount of video processing to be performed by the television As with all products that contain a digital display in rare instances when viewing certain content e g television broadcasts video games DVDs or with varous audio system connections you may notice that the picture and sound are slightly out of sync This phenomenon can be caused by various factors including without limitation video processing within the TV video processing in a
49. elected as described in the following table Automatic aspect size Aspect ratio of signal source automatically selected when ASPECT is ON 4 3 Normal Natural 16 9 Full Full 4 3 Letter box TheaterWide Not defined User set mode If the signal does not include aspect information the picture size you selected on pages 31 is displayed To turn on the ASPECT feature 1 Press TV to select the TV mode 2 Press MENU then press or until the SETUP menu appears 3 Press A or V to highlight ASPECT then press lt to select ON LA 2 6 SETUP CLOSED CAPTION OFF PICTURE MDE CINEMA Fim gm OFF BACK LIGHTING SELECT 32 J3U70221A E P31 36 32 POWER MG Ce TV lt gt Menu SKIP SEARCH REW EH SEARCH TOPMENU REC CLEAR TV VCR TOSHIBA CT 885 Note If the remote control does not operate your TV press the TV button on the remote control and try again 05 08 2005 10 14 AM Setting the sleep timer You can set the TV so it turns off automatically POWER To set the sleep timer TN CS P8 Repeatedly press SLEEP on remote control to set the length of time until the TV turns off The clock will increase 10 minutes for each Gh Gp eG press of the SLEEP button Oh00m Oh10m 1h50m 2h00m After the sleep timer is programmed the display will appear briefly every Q4 ten minutes to remind you that the sle
50. ep timer is operating CH RTN To confirm the sleep timer setting 10 Press SLEEP one time The remaining time will be momentarily TV displayed To cancel the sleep timer Repeatedly press SLEEP until the display turns to OhOOm Menu Using the closed caption feature av 4 The Closed Caption feature has two options e Captions An on screen display of the dialogue narration and sound effects of programs and videos that are closed captioned Sleep usually identified in your local TV listing as CC e Text An on screen display of information not related to the program such as weather or stock data if available in your viewing area To view captions or text Note 1 Press TV to select the TV mode Ole 2 Tune the TV to the desired program A closed caption signal may not be decoded 3 Press MENU then press to display the SETUP menu in the following situations 4 Press A or to highlight CLOSED CAPTION when a video tape has been dubbed when the signal reception is weak Pa when the signal reception is non standard SSE RETA 5 Press or select the desired Closed Caption mode as follows To view captions select C1 or C2 C1 displays translation of the primary language in your area Note If the program or video you selected is not closed 5 captioned no captions will display on screen Q e To view text select T1 or T2 Note If
51. ety Committee comprised of TV and consumer electronics furniture manufacturers to advocate children s safety and educate consumers and their families about television safety Tune Into Safety One size does NOT fit all Use appropriate furniture large enough to support the weight of your TV and other electronic components Use appropriate angle braces straps and anchors to secure your furniture to the wall but never screw anything directly into the TV Carefully read and understand the other enclosed instructions for proper use of this product Do not allow children to climb on or play with furniture and TVs Avoid placing any item on top of your TV such as a VCR remote control or toy that a curious child may reach for Remember that children can become excited while watching a program and can potentially push or pull a TV over Share our safety message about this hidden hazard of the home with your family and friends Thank you 2500 Wilson Blvd Arlington 22201 U S A Tel 703 907 7600 Fax 703 907 7690 www CE org gt CEA is the Sponsor Producer and Consumer Electronics Association Manager of the International CES CAUTION TO PREVENT ELECTRIC SHOCK DO NOT USE THIS POLARIZED PLUG WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE 05 08 2005 10 13 AM IMPORTANT SAFEGUARDS 1 8A 10 11 12
52. f POWER INPUT DISPLAY MUTE Note The cold cathode fluorescent lamp used for the back light on this TV has a limited life When areas on the screen darken flicker or no longer light up the lamp may be at the end of its life Contact your nearest Toshiba Authorized Service Station INPUT DISPLAY POWER Q Display ooo 2 C52 C6 TV Menu AV lt gt Note If the remote control does not operate your TV press the TV button on the remote control and try again The TV will automatically turn off after approximately 15 minutes if it is tuned to a vacant channel or a station that completes its broadcast for the day and stops broadcasting on that channel This feature does not work in Video input PC mode Understanding the Power Return feature If the power is cut off while you are viewing the TV and the power is resupplied the Power Return feature will turn the TV on automatically If the power is going to be off for a long time or you are going to be away from home for a long time unplug the power cord from the wall outlet to prevent the TV from turning on in your absence 38 J3U70221A E P37 40 38 05 08 2005 10 15 AM Picture Audio adjustments in the PC mode There are a number of picture settings you can adjust to optimize the performance of the unit in PC mode AUDIO Menu PICTURE Menu Example Adjust the contras
53. f precision technology however there 1 An afterimage ghost may appear on the screen if a fixed non moving image is displayed for a long period of time The afterimage is not permanent and will disappear in a short period of time Note Interactive video games that involve shooting a gun type of joystick at an on screen target may not work with this TV _______________________________________________________________________________________________ Precautions Notes on handling Notes on cleaning E Do not subject the LCD panel to physical shock such as Clean only with a soft dry lint free cloth dropping it It may cause unit damage and malfunction E Retain the original shipping carton and packing Notes on LCD materials For maximum protection when shipping E The fluorescent tube which illuminates the panel from repack the unit as it was originally packed at the factory the inside will deteriorate with use When the LCD E Do not use volatile liquids such as insecticide near the becomes dim flickers or does not illuminate contact unit Do not leave rubber or plastic products in contact your dealer for replacement with the unit for prolonged periods of time Doing so will E The brightness of the LCD monitor differs slightly lave marke on th finish depending on the viewing angles Adjust the angle to E ihe top and rear panels of the unit may become warm obtain the best viewing The recommended angle is 90 after a
54. ide and full page 31 Enter Pause FAV A Y Favorite Channels cycles through the channels you Skip Search programmed as favorite channels page 24 E ee Rew MENU ENTER accesses the menu system also sets menu TOP Menu selections page 22 Rec EXIT closes on screen menus page 22 DVD MENU access the DVD menu PAUSE pauses a videotape DVD PLAY plays a videotape DVD STOP stops a videotape DVD INPUT DISPLAY MUTE BOWES MGI 222 PAUSE STOP Sk E SEARCH REW FF SEARCH TOPMENU REC CLEAR TV VCR TOSHIBA CT 885 POWER Mute CH RTN Channel Return Volume VCR DVD Pic Size FAV AV Favorite Channels Menu Enter Exit Play Stop FF TV VCR Clear 0 5 c Ke lt 9 cu E lt Aim the remote control the remote sensor and press control buttons to DVD SKIP SEARCH gt skips DVD chapter operate REW rewinds a videotape DVD Operate the remote control within a 30 degree angle on either side of the remote sensor up to a distance of approx 16 ft 5m FF fast forwards a videotape DVD TOP MENU access the DVD TOP menu REC starts recording a videotape DVD CLEAR clears input data in DVD mode TV VCR toggles between TV and VCR modes when viewing while recording Approx 5 meters 21 J3U70221A E P17 24 21 05 08 2005 10 1
55. ill automatically close if you do not make a selection Your changes will still be saved When you are finished programming the menus press EXIT Changing the on screen display language You can choose from three different languages English French and Spanish for the on screen displays Adjustment menus and messages will appear in the language of your choice To select a language 1 Press TV to select the TV mode 2 Press MENU then press lt until the SETUP menu appears LA Fi 5 SETUP LANGUAGE ENGLISH CLOCK SET 12 00AM TV CABLE CABLE CH PROGRAM ADD ERASE ADD SELECT ADJUST 3 Press A or V to highlight LANGUAGE 21 SETUP LANGUAGE RSE FRAN SAIS B SPAROL CLOCK SET 12 00AM TV CABLE CABLE CH PROGRAM ADD ERASE ADD v 9 SELECT 9 ADJUST 4 Press or to highlight your desired language 22 J3U70221A E P17 24 22 Note The position and size of the on screen menus POWER CD G5 C3 C45 C55 Ce KIP SEARCH REW FF SEARCH TOPMENU REC CLEAR TV VCR TOSHIBA POWER TV Menu Enter AV 4 Exit change for some program formats such as 1080i or 720p Note If the remote control does not operate your TV press the TV button on the remote control and try again 05 08 2005 10 14 AM Adding channels to the TV s memory When you press CH or V your TV will s
56. ize The image is displayed close to its originally formatted proportion Some program formats will display with side bars and or bars at the top and bottom Natural picture size example The way the image displays will vary depending on the format of the program you are currently watching QOO 000 OOO FOOO Conventional 4 3 picture Conventional 4 3 picture in on a conventional TV Natural size on your wide screen screen TV TheaterWide picture size for 4 3 format programs The center of the picture remains close to its original proportion but the left and right edges are stretched wider to fill the screen The top and bottom edges of the picture may be hidden o Obes ers 19 TheaterWide picture size example Full picture size for 16 9 source programs If receiving a 4 3 format program the picture is stretched wider to fill the width of the screen but not stretched taller None of the picture is hidden OO GO O OO Full picture size example 31 vie J3U70221A E P31 36 31 POWER MGI Channel C4 C6 Numbers C75 C8 C9 CHRTN Cent VCR AE TV O O Pic Size Note You also can change the picture size by selecting PICTURE SIZE in the SETUP menu ORE L i SETUP A CLOSED CAPTION PICTURE SIZE CINEMA MODE FILM N A BACK LIGHTING 16 SELECT ADJUST Notes e The PICTURE SIZE feat
57. k 60Hz AC cord supplied 16 J3U70221A E P11 16 16 dissipation of heat and may cause fire electric shock or damage When this unit is not used for a long time e g away on a trip in the interest of safety be sure to unplug it from the wall outlet Do not plug unplug the plug when your hands are wet This may cause electric shock If you need to replace the supplied AC adapter or AC cord the specified AC adapter and AC cord must be used Contact the dealer that you purchased the unit from 05 08 2005 10 13 AM Setting up your Using the remote control Preparing the remote control for use With the remote control you can operate your TV most cable TV converters satellite receivers VCRs and DVD players together even if they are different brands If you will be using your TV with a Toshiba satellite receiver VCR or DVD player your remote control is already programmed and ready to use If you own different brands of cable TV converters satellite receivers VCRs and or DVD players you must first program your remote control See Programming the remote control to operate your other devices on page 18 Installing the remote control batteries To install the batteries 1 Open the battery cover on the back of the remote control Note The TV remote control may not operate your VCR DVD player or cable TV converter Refer to the owner s manual supplied with your
58. n Refresh rate VGA 640x480 60Hz SVGA 800x600 56 3Hz SVGA 800x600 60 3Hz XGA 1024x768 60Hz WXGA 1280x720 60Hz WXGA 1280x768 60Hz Notes The current signal source does not display when you return to TV mode The on screen displays will have a different appearance in PC mode than in TV mode When you select WXGA mode set the WXGA INPUT to ON in the PC PICTURE menu see page 39 2 Connect the AC adapter plug into the TV s DC input jack Notes 3 Connect the AC cord into a wall outlet MN WO M AmA Make sure to insert the plug of each cord securely During use the AC adapter becomes warm This is not a malfunction WARNING Do not connect this unit to the power source using any device other than the supplied AC adapter or power cord This could cause fire electric shock or damage Do not use with a voltage other than the power voltage displayed This could cause fire electric shock or damage 00000 0 000000000 Never lift the AC adapter by holding the AC cord The adapter may fall causing personal injury or equipment damage amp CAUTION Do not use the AC adapter if it is covered by a cloth etc To DC cmm 7 AC 120V or pressed into a narrow area This results in poor input jac
59. n attached gaming system and video processing different compression rates used by broadcasters in their programming You may want to try one or more of the following suggestions which may help to reduce the effect of this phenomenon e f the TV is connected to an A V receiver that has a programmable audio delay feature use this feature to help synchronize the sound to the picture f you notice this phenomenon only on certain TV channels please contact your local broadcast cable or satellite provider to inform them of this issue 40 05 08 2005 10 15 Specifications Notes This model complies with the specifications listed below Designs and specifications are subject to change without notice This model may not be compatible with features and or specifications that may be added in the future LCD panel Display method Number of pixels Television system Tuner type Channel coverage Antenna input Power source Power consumption Audio power Speaker type Video Audio terminals Dimensions Weight Supplied accessories E EDID Enhanced Extended Display Identification J3U70221A E P41 44 41 20 04 inches 508 9 mm diagonal Screen size is approximate Color TFT LCD 1366 Horizontal x 768 Vertical NTSC standard F Synth VHF 2 13 UHF 14 69 Cable TV 5 1 A l J W W 1 W 84 VHF UHF 75 ohm 120V AC 60 Hz with supplied AC adapter 100 W with s
60. nals for normal viewing requires the use of a descrambler device which is generally provided by the cable company Option 1 For Subscribers to Basic Cable TV Service For basic cable service not requiring a Converter Descrambler box connect the incoming 75 ohm Coaxial Cable directly to the Antenna Jack on the back of the television Option 2 For Subscribers to Scrambled Cable TV Service If you subscribe to a cable service that requires the use of a Converter Descrambler box connect the incoming cable to the Converter Descrambler box and connect the output of the box to the Antenna Jack on the back of the television Follow the connections shown below Set the television to the output of the Converter Descrambler box usually channel 3 or 4 and use the Converter Descrambler box to select channels gt LE 5 gt o o Option 3 For Subscribers to Unscrambled Basic Cable with Scrambled Premium Channels If you subscribe to a cable service in which basic cable channels are unscrambled and premium channels require the use of a Converter Descrambler box you may wish to use a two set signal splitter some times called a two set coupler and an A B Switch box from the cable Note installer or an electronics supply store Follow the connections shown When you use a converter box with your TV below With the switch in the B position you can directly tune any there may be features that you cannot
61. ng to impact the surface of the viewing screen LCD panel The LCD panel inside the TV is fragile and subject to damage The LCD Panel contains glass and a toxic liquid If the liquid comes in contact with your mouth or eyes or your skin is cut by broken glass rinse the affected area thoroughly with water and consult your doctor ALWAYS contact a service technician to inspect the TV any time it has been damaged or dropped 7 9 5 ON DISPOSAL This product contains mercury Disposal of mercury may be regulated due to environmental considerations For disposal or recycling information please contact your local authorities or the Electronic Industrial Alliance www eiae org J3U70221A E P02 10 5 05 08 2005 10 13 AM may be an occasional pixel dot of light that does not operate properly does not light remains constantly lit etc This is a structural property of LCD technology is not a sign of malfunction and is not covered under your warranty Such pixels are not visible when the picture is viewed from a normal viewing distance malfunction therefore Toshiba is not responsible for perceived defects resulting from these symptoms JE Important notes about your LCD S The following symptoms are technical limitations of 2 The LCD panel contained in this TV is manufactured using an LCD Display technology and not an indication of extremely high level o
62. o hear audio you must also connect the analog audio cables to the HDMI audio IN jacks see page 15 Set the HDMI audio input setting to DVI with this connection To select the HDMI audio input source 1 Press TV to select the TV mode 2 Press MENU then press lt or 10 display the AUDIO menu 3 Press W or A to highlight HDMI 4 Press 4 or to select HDMI DVI ud 21 8 AUDIO SRS 3D Focus RESET amp sELECT ADJUST Adjusting the back lighting feature If your TV is in a bright room the screen image may be difficult to see You can use the BACK LIGHTING feature to adjust the screen bright ness for improved picture clarity To adjust the back lighting 1 Press TV to select the TV mode 2 Press MENU then press lt or until the SETUP menu appears 3 Press A or V to highlight BACK LIGHTING 2 6 SETUP CLOSED CAPTION OFF PICTURE SIZE gt CINEMA MODE FILM ASPECT ON BACK LIGHTING mek O T3 SELECT ADJUST 4 Press a or adjust the screen brightness Displaying on screen information Press DISPLAY to display the following on screen information Clock Channel number or Video input mode selected Channel label if preset Stereo or SAP second audio program audio status On timer Sleep timer if preset Picture size STEREO SAP ON TIMER 12 00AM SLEEP TIMER 2h00m ANT ABCD clock 12 00am caste 002 Auto power of
63. oes not operate your TV press the TV button on the remote control and try again 05 08 2005 10 14 AM Channel Numbers TV Menu Enter lt gt Exit Selecting the video input source SOURCE SELECTION Press INPUT to view a signal from another device connected to your TV go ae such as a VCR or DVD player You can F select ANT VIDEO 1 VIDEO 2 ColorStream HD HDMI or PC depend ing on which input jacks you used to connect your devices see Connecting Pressing INPUT on the remote your TV on page 9 0 5 SELECT control displays the current signal Source press INPUT again or 0 5 to change You also can use the Channel V buttons to select the video input Source In addition to cycling through your programmed channels page 23 the Channel V buttons will also cycle through the video input sources in the order illustrated below ANT programmed channel lt gt VIDEO1 lt VIDEO2 PC 9 HDMI OolorStream HD Labeling the video input sources The video label feature allows you to label each input source for your TV from the following preset list of labels Uses the default label name VCR Video cassette recorder DVD DVD video DTV Digital TV set top box SAT Satellite box CBL Cable box To label the video input sources 1 Press TV to select the TV mode 2 Press MENU then press lt or P to
64. other devices to see which features may be available Additionally the remote control for this TV may not support certain features available on the original remote controls for your other devices in which case it is suggested that you use the original remote control for the applicable device Caution Never throw batteries into a fire Notes 2 Install two AAA size batteries Match the and signs on the batteries to the signs on the battery compartment 3 Close the battery cover on the remote control until the lock snaps Using the remote control to operate your other devices To control a cable TV Power converter satellite Input TV receiver Mute TV Program the remote End control to recognize the CH RTN brand of your cable TV Channel Retum converter satellite receiver Channel AV see Programming the CBL SAT remote control to operate Volume TV your other devices on Pic Size TV page 18 The buttons shown at right will control the cable TV converter satellite receiver Press CBL SAT first TV VCR J3U70221A E P17 24 17 INPUT DISPLAY MUTE o C52 Ce E CHRIN vcr cH voL ovo SLEEP PICSIZE FAV ENTER riei J gt f a ENTER v EXT PAUSE PLAY STOP SKIP SEARCH REW SEARCH TOPMENU REC CLEAR TWVCR TOSHIBA CT 885 17
65. p 6 we 6 ON TIMER ON TIMER gt Sze AM CLEAR RETURN gt 5 ADJUST Eu Nd E 7 ON TIMER Press to select ONCE or DAILY Press EXIT to return to normal viewing ON TIMER 6 30AM gt CH012 ONCE DYNIWA CLEAR RETURN ADJUST ENTER SET Select CLEAR in step 8 above Press EXIT to return to normal viewing 30 INPUT DISPLAY MUTE OOG C45 C55 Ce TV I Menu Enter Note After a power failure or disconnection of the power the timer settings will be lost Note If the remote control does not operate your TV press the TV button on the remote control and try again 05 08 2005 10 14 AM Viewing the wide screen picture formats 480i and 480p signals only You can view 480i and 480p format programs in a variety of picture sizes Natural TheaterWide and Full The way the image displays in any of the picture sizes will vary depending on the format of the program you are viewing Select the picture size that displays the current program the way that looks best to you Selecting the picture size 1 Press TV to select the TV mode 2 Press PIC SIZE on the remote control 3 Press the corresponding number button 0 2 to select the desired picture size as described below and on the next page PICTURE SIZE 0 NATURAL 1 THEATER WIDE 2 FULL 0 2 SELECT Natural picture s
66. pon or against GHE them paying particular attention to cords at plugs convenience receptacles and the point where they exit from the appliance Ape t LIGHTNING We To protect your unit from a lightning storm or when it is left unattended and unused for long periods of time unplug it from the wall outlet and disconnect the antenna or cable system This will prevent damage to the unit due to lightning and power line surges J3U70221A E P02 10 3 05 08 2005 10 13 AM 7 5 5 IMPORTANT SAFEGUARDS 14 POWER LINES An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits or where it can fall onto or against such power lines or circuits When installing an outside antenna system extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal 15 OVERLOADING Do not overload wall outlets and extension cords as this can result in a risk of fire or electric shock 16 OBJECT AND LIQUID ENTRY Do not push objects through any openings in this unit as they may touch dangerous voltage points or short out parts that could result in fire or electric shock Never spill or spray any type of liquid into the unit 17 OUTDOOR ANTENNA GROUNDING If an outside antenna or cable system is connected to the unit be sure the antenna or cable system is grounded to provide some protection
67. r controls and installation or repair of antenna systems are not covered by this warranty Reception problems caused by inadequate antenna systems misaligned satellite dishes cable television distribution VCRs DVD players recorders personal computer level IEEE 1394 devices and any other connected signal source device are your responsibility J3U70221A E P41 44 42 42 5 Warranties extend only to defects in materials or workmanship as limited above and do not extend to any LCD Television or parts that have been lost or discarded by you or to damage to the LCD Television or parts caused by fires misuse accident Acts of God such as lightning or fluctuations in electric power improper installation improper maintenance or use in violation of instructions furnished by TCL use or malfunction through simultaneous use of this LCD Television and connected equipment or to units that have been modified or had the serial number removed altered defaced or rendered illegible How to Obtain Warranty Service If after following all of the operating instructions in this manual and reviewing the section entitled Troubleshooting you find that service is needed 1 To find the nearest TCL Authorized Service Depot visit TCL s web site at www toshiba ca 2 You must include the original bill of sale or a copy thereof or other proof of purchase along with the entire LCD Television to the Authorized Se
68. ress 10 display the CH LOCK menu o Ce PENES 6 Press to highlight CLEAR and clear all channels from the C9 list of locked channels Press ENTER S 7 Press EXIT to return to normal viewing TV 7 Locking the video inputs 2 With the VIDEO LOCK feature you can lock out the input sources as u VIDEO1 VIDEO2 COLORSTREAM HD HDMI PC and channels 3 4 You will not be able to select the input sources with the INPUT gt button or Channel buttons unless you clear the setting o To set up the video lock em 1 Press TV to select the TV mode 2 2 Press MENU then press to display the LOCKS menu Exit im 3 Press A or V to display the password entering mode 4 Use the Channel Number buttons 0 9 to enter your password then press ENTER The LOCKS menu appears 5 Press or V to highlight VIDEO LOCK Mote umm After programming VIDEO LOCK change 6 Press 4 or to select oe h the INPUT bef OFF Unlocks all video input Vibes ocx SI ey sources ee ne turning off the television VIDEO Locks VIDEO1 VIDEO2 COLORSTREAM HD HDMI aor Note VIDEO Locks VIDEO1 VIDEO2 COLORSTREAM HD HDMI PC channel 3 and channel 4 This option should be used if you use the antenna terminal to play a video tape 7 Press EXIT to return to normal viewing If the remote control does not operate your TV
69. ring mode Use the Channel Number buttons 0 9 to enter your password Press ENTER The LOCKS menu appears Press A or V to highlight NEW PASSWORD and press P to display the NEW PASSWORD menu 6 Use the Channel Number buttons 0 9 to enter a new code Press ENTER 7 Enter the password again to confirm it and then press ENTER 8 Press EXIT to return to normal viewing 25 J3U70221A E P25 28 25 Note The password you programmed is also used in the LOCKS menu see pages 26 27 POWER Display i Channel Numbers TV Exit e IP SEARCH REW FF SEARCH TOPMENU REC CLEAR TV VCR TOSHIBA CT 885 Note If you forget your password press DISPLAY four times within five seconds while the TV is in password entering mode This allows you to reset your password 2 5 2 lt T Lcd 7 Note If the remote control does not operate your TV press the TV button on the remote control and try again 05 08 2005 10 14 AM Locking channels With the CH LOCK feature you can lock specific channels You will not be able to tune locked channels unless you clear the setting You can choose to lock up to nine TV channels and nine cable channels INPUT DISPLAY MUTE 1 Press TV to select the TV mode O O 2 Use the Channel Number buttons 0 9 and 100 to displa
70. rvice Depot You are responsible for all inbound transportation and insurance charges for the LCD Television to the Authorized Service Depot For additional information visit TCL s website www toshiba ca ALL WARRANTIES IMPLIED BY THE LAW OF ANY PROVINCE OF CANADA INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY LIMITED TO THE DURATION OF THE LIMITED WARRANTIES SET FORTH ABOVE WITH THE EXCEPTION OF ANY WARRANTIES IMPLIED BY THE LAW OF ANY PROVINCE OF CANADA AS HEREBY LIMITED THE FOREGOING WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES GUARANTEES AGREEMENTS AND SIMILAR OBLIGATIONS OF TCL WITH RESPECT TO THE REPAIR OR REPLACEMENT OF ANY PARTS IN NO EVENT SHALL TCL BE LIABLE FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES INCLUDING BUT NOT LIMITED TO LOST PROFITS BUSINESS INTERRUPTION OR MODIFICATION OR ERASURE OF RECORDED DATA CAUSED BY USE MISUSE OR INABILITY TO USE THIS LCD TELEVISION No person agent distributor dealer or company is authorized to change modify or extend the terms of these warranties in any manner whatsoever The time within which an action must be commenced to enforce any obligation of TCL arising under the warranty or under any law of Canada or any province thereof is hereby limited to ninety 90 days from the date you discover or should have discovered the defect This limitation does not apply to implied warranties arising under the law of
71. s TV to select the TV mode 2 Press MENU then press lt or to display the PICTURE menu 3 Press A or V to highlight CableClear PICTURE A CableClear onea TEMPERATURE cooL RESET gt SELECT amp ADJUST 4 Press or P to select ON To turn off the CableClear feature Select OFF in step 4 Selecting the color temperature Change the picture quality by selecting from three preset color tem peratures cool medium and warm as described in the following table Mode Picture Quality COOL Blueish MEDIUM Neutral WARM Reddish To select the color temperature 1 Press TV to select the TV mode 2 Press MENU then press lt to display the PICTURE menu 3 Press A or V to highlight COLOR TEMPERATURE We od ud 65 PICTURE A CableClear COLOR TEMPERATURE S Ie WMEDIUM WARM RESET gt SELECT ADJUST 4 Press 4 or to highlight the mode you prefer 5 Press EXIT to return to normal viewing Resetting your picture adjustments The RESET function returns your picture quality adjustments to the following factory settings Mode sports TAE iine center 0 Brightness center 25 Sharpness center 25 Contrast max 50 Color temperature cool COM atis center 25 To reset your picture adjustments 1 Press TV to select the TV mode 2 Press MENU then press lt or to display the PICTURE menu
72. t 1 Press TV to select the TV mode 2 During PC mode press MENU then press lt or to display the PICTURE menu 3 Press A or V to select CONTRAST 4 Press or adjust CONTRAST 5 Press EXIT to return to normal viewing DESCRIPTION ABOUT EACH SETTING OPTION PICTURE menu BRIGHTNESS CONTRAST To adjust the contrast of PC Monitor screen HOR POSITION To adjust the horizontal position of the image STABLE SOUND the PC Monitor screen Each video standard will require a different value for this setting VER POSITION To adjust the vertical position of the image on WOW SRS 3D the PC Monitor screen Each video standard will TV Menu AV lt gt Exit Notes If you wish to change the on screen language follow the steps 1 4 on page 22 If no buttons are pressed for more than approx 60 seconds the PC Monitor Menu screen will return to normal Monitor screen automatically The PC Monitor Menu settings are not effective for normal TV mode DVD mode or external input mode AUDIO menu To adjust the brightness of PC Monitor screen _ BASS STREBLE BALANCE To adjust the sound quality of PC mode To turn on or off the StableSound feature in PC mode To turn on or off the surround effect PC mode require a different value for this setting FOCUS To turn on or off the vocal PHASE This must be adjusted after the frequency has emphasis effect in PC mode
73. text is not available in your viewing area a black rectangle may appear on screen If this E happens set the Closed Caption feature to OFF lt To turn the Closed Caption feature off highlight OFF in the 2 Closed Caption menu 2 Note If the remote control does not operate your TV press the TV button on the remote control and try again 33 J3U70221A E P31 36 33 05 08 2005 10 14 AM 1 __ Adjusting the picture Selecting the picture mode INPUT DISPLAY MUTE pone You can select four picture modes Sports Standard Movie and Memory as described in the following table Mode SPORTS STANDARD MOVIE MEMORY Picture Quality Bright and dynamic picture factory set Standard picture quality factory set Movie like picture setting factory set Your personal preferences set by you see Adjusting the picture quality To select the picture mode 1 Press TV to select the TV mode 2 Press MENU then press lt or to display the PICTURE menu 3 Press A or V to highlight MODE Oe Fo 21 6 PICTURE MODE BRIGHTNES CONTRAST TINT SHARPNESS SELECT STANDARD 25 ADJUST 4 Press 4 to highlight the mode you prefer 5 Press EXIT to return to normal viewing Adjusting the picture quality 9 You can adjust the picture quality to your personal preferences CO C4 C52 C3 lt gt C75 C85 C9
74. the sound quality of your TV by adjusting the bass treble and balance To adjust the sound quality 1 Press TV to select the TV mode 2 Press MENU then press 4 until the AUDIO menu appears 3 Press A or V to highlight the item you want to adjust Note Adjusting the sound quality bass treble and balance does not affect the sound that is 6 output from the headphone jack AUDIO 3 o gt m 92 S 2 gt STEREO 25 25 BALA NCE STABLE SOUND OFF v SELECT ADJUST 4 Press or to adjust the level 4 makes the sound quality weaker or decreases the balance in the right channel depending on the item selected gt makes the sound quality stronger or decreases the balance in the left channel depending on the item selected 36 Note If the remote control does not operate your TV press the TV button on the remote control and try again J3U70221A E P31 36 36 05 08 2005 10 14 AM _ 1 1 Resetting your audio adjustments POWER The RESET function returns the audio adjustments to the following O factory settings E M E m Em DIS reble center center 0 CHRIN Balance To reset your audio adjustments 1 Press TV to select the TV mode 2 Press MENU then press or to display the AUDIO menu 3 Press or V to highlight RESET and then press LER u
75. top only on the channels you have stored in the TV s channel memory Follow the steps below to program channels into the channel memory Programming channels automatically Your TV can automatically detect all active channels and store them in its memory After the TV has stored the channels in its memory auto matically you can add or erase channels manually To add channels automatically 1 Press TV to select the TV mode 2 Press MENU then press lt or to display the SETUP menu 3 Press A or V until the TV CABLE selection is highlighted op 8 4 Press or to highlight either UE MON TV or CABLE depending on chock ser nm which you use Abo ERASE If you use an antenna choose TV If you use cable choose CABLE Press W until the CH PROGRAM selection is highlighted 6 Press gt to start channel programming The TV will automatically cycle through all the TV or Cable channels depending on which you selected and store all active channels in the channel memory While the TV is cycling through the channels the message PROGRAMMING NOW PLEASE WAIT appears 7 When channel programming is complete the message COMPLETED appears 8 Press CH A or V to view the programmed channels SELECT amp ADJUST Adding and erasing channels manually After you have programmed the channels automatically you can add or erase specific channels manually To add or erase channels manually
76. trol a DVD player Program the remote control to recognize the brand of your DVD player see Programming the remote control to operate your other devices below The buttons shown at right will then control the DVD player Press DVD first Power Input TV Display Mute TV Number buttons Volume TV DVD Pic Size TV DVD MENU AV 4 ENTER DVD controls DVD Skip Search 4 gt TOP Menu DVD Clear PAUSE SRI SEARCH REW SEARCH SSS TOSHIBA creas Programming the remote control to operate your other devices This remote control is pre programmed to operate most Toshiba satellite receivers VCRs and DVD players To control a non Toshiba device or a Toshiba device that the remote control is not pre programmed to operate you must follow the steps below to program your remote control 1 Refer to the code tables on pages 19 and 20 to find the corresponding code for your device If more than one code is listed try each one separately until you find the one that works 2 If you are programming the remote control to operate your Cable TV converter satellite receiver Press CBL SAT VCR Press VCR DVD player Press DVD 3 While holding down DISPLAY press the Channel Number buttons to enter the three digit code for your device within 10 seconds Note If you do not
77. ture no sound No sound picture OK Poor sound picture OK Poor picture sound OK Poor reception of broadcast channels Cannot receive above channel 13 Unable to select a certain channel Cannot access signal input sources Video1 Video2 ColorStream HD HDMI and PC and or Channels 3 and 4 Multiple images Poor color or no color Black box on screen No stereo or SAP sound from a known MTS broadcast The remote control does not operate The top panel buttons do not operate Poor composite or S video picture Picture and sound are out of sync J3U70221A E P37 40 40 Solution Make sure the connection of the AC adapter and AC cord then press POWER The remote control batteries may be dead Replace the batteries Check the antenna cable connections The sound may be muted Press VOLUME The station may have broadcast difficulties Try another channel The MTS feature may be in SAP mode Select STR or MONO in the MTS menu The station may have broadcast difficulties Try another channel The MTS feature may be in SAP mode Select STR or MONO in the MTS menu Check the antenna connections The station may have broadcast difficulties Adjust the PICTURE menu The station may have broadcast difficulties Check the antenna connections Try another channel Try another channel Make sure TV CABLE is set to CABLE mode The channel may b
78. upplied AC adapter 2 5W 2 5W 1 8 x 3 9 inches 45 7 x 99 1 mm 16 ohm x 2 S VIDEO INPUT Y INPUT 1V p p 75 ohm negative sync Mini x 1 C INPUT 0 286V p p burst signal 75 ohm VIDEO AUDIO INPUT VIDEO 1V p p 75 ohm negative sync pin jack x 2 AUDIO 150 mV rms 30 modulation equivalent 47k ohm pin jack L R x 5 ColorStream component video INPUT Y 1V p p 75 ohm Pr 0 7V p p 75 ohm 0 7V 75 ohm HEADPHONE 3 5mm stereo mini jack x 1 HDMI INPUT HDMI compliant type A connector HDCP compliant E EDID compliant Suggested scan rates 1080i 480p 480i 720p HDMI Audio 2 channel PCM 32 44 1 48 kHz sampling frequency 16 20 24 bits per sample PC Monitor Input Mini Dsub 15pin x 1 Width 21 13 16 inches 554 mm Height 17 5 8 inches 448 mm Depth 8 11 16 inches 220 mm 19 8 105 9 0 kg Remote control CT 885 with two size AAA batteries AC adapter AC cord for AC adapter Owner s Manual This booklet WARNING Always use a Toshiba approved wall bracket to wall mount this television The use of any wall bracket other than a Toshiba approved wall bracket to wall mount this television could result in serious bodily injury and or property damage For more information call TCL s Customer Service Department at 1 800 268 3404 x pu ddy 41 05 08 2005 10 15 ml Appendix Limited Canada Warranty for LCD Televisions 20 and smaller
79. ur TV press the TV button on the remote control and try again 05 08 2005 10 14 AM Using the LOCKS menu The LOCK menu includes the CH LOCK VIDEO LOCK GAME TIMER PANEL LOCK and NEW PASSWORD functions Selecting a password You can use these functions after entering the correct password To select your password and access the LOCKS menu 1 Press TV to select the TV mode 2 Press MENU then press or P to highlight the LOCKS menu 3 Press A or V to display the password entering mode LER 02 Locks NEW PASSWORD o SELECT 0 9 ENTER SET EXIT END 4 Use the Channel Number buttons 0 9 to enter your password If you are accessing the LOCKS menu for the first time select a four digit number to be your password Press ENTER 2 LOCKS NEW PASSWORD SELECT 0 9 ENTER SET EXIT END 5 Enter the password again to confirm it and then press ENTER The LOCKS menu appears If the wrong password is entered ERROR blinks about 4 seconds LOCKS CONFIRM PASSWORD SELECT 0 9 ENTER SET EXIT END 6 You may now set up the LOCKS menu See Locking channels page 26 Locking the video inputs page 26 Setting the GameTimer page 27 or Using the panel lock feature page 27 To change your password Press TV to select the TV mode Press MENU then press to display the LOCKS menu Press A or V to display the password ente
80. ure is not available for some program formats such as 1080i or 720p Such formats will display in Full picture size Using these functions to change the picture size i e changing the height width ratio for any purpose other than your private viewing may be prohibited under the Copyright Laws of the United States and other countries and may subject you to civil and criminal liability Cc 2 gt o T t D mr D 7 Note If the remote control does not operate your TV press the TV button on the remote control and try again 05 08 2005 10 14 AM 3 o gt E m S 4 gt Selecting the cinema mode When you view a DVD movie 3 2 pulldown processed from a DVD player connected to the ColorStream component video inputs on the TV smoother and more natural motion can be obtained by setting the CINEMA MODE to FILM To set the CINEMA MODE to FILM 1 Press TV to select the TV mode 2 Press MENU then press 4 or gt 21 8 SETUP until the SETUP menu appears z 3 Press A or V to highlight CINEMA een MODE then press lt or to select aa 1 FILM SELECT ADJUST To set the CINEMA MODE to VIDEO off Press 4 or select VIDEO in step above Using the ASPECT feature When the ASPECT feature is set to ON and the TV receives a 480i signal the picture size is automatically s
81. y the television channel you wish to lock CG C3 Channel 3 Press MENU then press 4 to display the LOCKS menu Ce Numbers 4 Press A or V to display the password entering mode 5 Use the Channel Number buttons 0 9 to enter your password then Em INE E TV press ENTER The LOCKS menu Locks appears c ger 6 Press A or V to highlight CH Sees TIMER LOCK and press to display i i CH LOCK menu amp sELECT ADJUST Enter 7 Press or select the follow 4 ing rea SET to set the channel as one to be locked Then press a ee ESL i ci ENTER LOCKED CH Exit e CLEAR to clear all channels from the list of locked channels Then press ENTER SELECT 8 Repeat steps 1 through 7 to lock other channels When you are finished locking channels press EXIT to return to normal viewing If you try to tune a locked channel the TV will not display it but will Note display the nearest unlocked channel After programming CH LOCK change Tosmiacicehaimsls channels before turning off the television Press TV to select the TV mode 1 2 Press MENU then press or gt to display the LOCKS menu E 3 Press A or V to display the password entering mode O 4 Use the Channel Number buttons 0 9 to enter your password INPUT then press ENTER The LOCKS menu appears C12 3 CES 5 Press A or V to highlight CH LOCK and p

Download Pdf Manuals

Related Search

Related Contents

Philips BTM1180  Nokia 770 Cell Phone User Manual  MPA Multi-Protocol Terminal Emulation Adapter Using the DP8344    Motorola M800BP Telephone User Manual  ックス DAS・。AB 取扱説明書  Rounds Tracker User Manual  共通取扱説明書  M5/M6 Manual del Operador (Spanish)  Pfister F-529-7ANY Installation Guide  

Copyright © All rights reserved. Failed to retrieve file