Home

Toshiba 3500 Personal Computer User Manual

1. E Sele ae Tar a Jf a E al ape EET Suu Numeric and cursor control overlay Using the overlay to type numeric data The keys with the numbers on their right front are the numeric overlay keys To turn the numeric overlay on press Fn and F11 simultaneously The numeric mode light glows when the numeric overlay is on Once the numeric overlay is turned on To Procedure Type lowercase letters Press and hold down Fn while you type the letters Type uppercase letters Press Fn and Shift simultaneously while you type the letters Use the cursor control Press and hold down Shift while keys you use the overlay keys then release Shift to return to the numeric overlay Learning the Basics 11 Starting a program To turn off the numeric overlay hold down the Fn key and press F11 again The numeric mode light on the keyboard indicator panel goes out Using the cursor control overlay SS To turn on the cursor control overlay press Fn and F10 simultaneously The cursor control mode light on the keyboard indicator panel glo
2. Function keys e f III N Secondary control button TouchPad Primary control button ystem Display release button eal pane Toshiba tablet pen The writing instrument used with the writing tablet For more information see Using tablet mode on page 106 Power button The power button is located above the Esc QO key Press and release the power button to turn on the computer For more information see Turning on the power on page 54 Power button lock Locks power on Function keys Used with the Fn key activate several different system functions For more information see Hot Keys on page 210 TouchPad enables you to move the cursor with the stroke of a finger For more information see Using the TouchPad on page 54 32 Finding Your Way Around Finding where everything is located Primary control button Acts like the primary button on a mouse For more information see Using the TouchPad on page 54 Display release button Pressing this button opens the computer display panel System indicator panel Provide information about various system functions For a description of these lights see System indicator panel on page 34 Secondary control button Acts like the secondary button on a mouse For more information see Using the TouchPad on pag
3. Sample TOSHIBA Power Saver Properties window In the Plugged in area click the Details button Click the System Power Mode tab Select Hibernation for the options you want When I press the power button Set this option to Hibernation so that the computer will go into Hibernation mode when you press the power button When I close the lid Set this option to Hibernation so that the computer will go into Hibernation mode when you close the display panel 7 Click Override all Modes with settings here 1 42 Enhancing Productivity Using Hibernation The Set the range window appears Set the range Sample Set the range window with DC only option 8 Do one of the following Click DC only if you want the settings to apply only when you are using battery power Click All for the settings to apply whether you are using battery power or outlet power 9 Click OK to close the Full Power Properties window 10 Click the Hibernate tab then click the Enable hibernate support check box 11 Click OK to close the TOSHIBA Power Saver Properties window then close the Control Panel Going into Hibernation mode If you are not connected to a Windows network server domain server power off the computer using the Hibernation command as follows 1 Click Start Turn off computer Enhancing Productivity 1 43 Using Hibernation The Turn off computer window appears Turn off computer Hibernate Turn
4. In the search field type in the topic on which you need help and follow the on screen instructions Click a problem you would like help with from the listings and follow the on screen instructions You can connect to Support Online by clicking Support from the menu Resolving a hardware conflict If you receive an error message telling you there is a device driver conflict or a general hardware problem try using Windows Help and Support to troubleshoot the problem first For help on hardware conflicts 1 Click Start then click Help and Support 2 Click the Hardware link in the window s left pane A list of category links appear 3 Click the Fixing a hardware problem 4 Choose from specific topics and follow the steps If there is still a problem the operating system should display a message that explains what the conflict is 1 82 lf Something Goes Wrong Resolving a hardware conflict A plan of action The smooth operation of the system depends on the interaction of all devices programs and features If the system or one of its attached devices isn t working resolving the problem can be time consuming and frustrating The recommended procedure for getting multiple devices to work together is to add and set up one device at a time After you add each device test it to make sure it and all previously connected devices work The device most recently connected to the system is the one most likely to
5. For more information on using a modem see Setting up for communications on page 125 HINT If you are using a telephone line at home disable Call Waiting before you connect through the modem Call Waiting i Ji interrupts transmission Connecting to a network To learn how to use your computer s LAN or W1 Fi capabilities to connect to a network see Connecting your computer to a network on page 81 Getting Started D Setting up your computer Connecting to a power source Your computer requires power to operate Use the power cable and AC adapter to connect the computer to a live power outlet or use the battery Connecting to an AC outlet The AC adapter enables you to power the computer from a wall outlet and to charge the computer s battery disconnect it Do NOT pull the cable itself Doing so may damage 2 DANGER Hold the power cable by its plug when you connect F the power cable and result in a Short circuit or electric shock To connect AC power to the computer 1 Connect the power cable to the AC adapter Connecting the power cable to the AC adapter 5 Getting Started Setting up your computer 2 _ Plug the AC adapter into the DC IN on the back of the computer Connecting the AC adapter to the computer 3 Connect the power cable to a live electrical outlet If the electrical outlet is live the system indicator panel s AC power light 482 glow
6. Gently push the tray in to close it To remove a disc with the computer turned off 1 Insert a slender object such as a straightened paper clip into the manual eject hole CAUTION Never use a pencil to press the manual eject button A Pencil lead can break off inside the computer and damage it e 2 Gently pull the tray out until it is fully open remove the disc and place it in its protective cover 3 Gently push the tray in to close it Caring for CDs and DVDs hS e hS gt hS e he Sd Store your discs in their original containers to protect them from scratches and keep them clean Never bend a disc or place heavy objects on top of it Never apply a label to or otherwise mar the surface of a disc Hold a disc by its outside edge Fingerprints on the surface can prevent the drive from reading the data properly Avoid exposing discs to direct sunlight or extreme heat or cold To clean a disc that is dirty wipe it with a clean dry cloth The most efficient method to clean it is to start from the center of the disc and wipe toward the outward edge not in a circle If necessary moisten the cloth with water or a neutral cleaner not benzine or rubbing alcohol Let the disc dry completely before inserting it in the drive 80 Learning the Basics Playing audio Playing audio Your computer is equipped to play audio files including those that run on optional media d
7. Getting Started 49 Setting up your computer See your printer documentation for additional configuration steps or see Setting up a printer on page 60 Connecting the modem Your computer comes with a built in modem that can be connected to a standard voice grade telephone line The modem allows you to Access the Internet Communicate with your office s local area network LAN or a larger corporate wide area network WAN For specific information about connecting to a LAN or WAN consult your network administrator o Send a fax directly from your computer For more information regarding your system s V 92 modem visit the Toshiba web site at www pcsupport toshiba com Connecting to a phone line Before you can communicate using the modem you need to connect it to a telephone line Your computer s built in modem provides an RJ11 jack 1 Plug one end of the telephone cable into the modem port on the left side of the computer Connecting the telephone cable to the modem port D0 Getting Started Setting up your computer 2 Connect the other end to the RJ11 wall jack 7 LP _A Connecting to a wall jack CAUTION The modem is designed for use with a standard analog telephone line Never connect the modem to a digital telephone line A digital line will damage the modem Now you re ready to send a fax or use the modem to connect to an online service or the Internet
8. The Pen Options tab allows you to set various pen options After making your selections on the Tablet and Pen Settings window click OK Chapter 8 Keeping Your Files Safe You may have files on your computer that you want to keep private Your computer comes with several options that can help you keep your computer and files safe from unwanted intrusion This chapter describes the security options for your notebook computer Using passwords in the Windows operating system Setting password lets you leave your computer secure in the knowledge that nobody can access your files When you set a password you must enter the password before you can work on your computer again Toshiba supports the following types of passwords on your computer A power on password Prevents unauthorized users from starting or restarting the computer An instant password Secures your open programs and files when you need to leave the computer temporarily 166 Keeping Your Files Safe 1 6 Using passwords in the Windows operating system A hard disk drive password Protects your data by preventing access to the hard disk even if it is removed and installed in another computer You can set a hard disk drive user password and or a hard disk drive master password User level passwords The user level password is the basic level of password security You can use it as both a power on password and an instant password
9. Your computer includes several utilities designed to help you to reconfigure your system to best meet your individual needs Together these allow you to ascertain certain system details set additional options or change default options These utilities are described in this chapter Fn esse Hotkey utility TOSHIBA Console TOSHIBA Rotation utility Fn esse The operating system shortcuts and Toshiba s Fn esse program provide quick ways to open programs documents and folders from within any program without using the Start menu This section describes how to use the Fn esse program to quickly access your programs and files 149 1 50 Toshiba Utilities Fn esse With Fn esse you can assign an Fn key combination to Open a Windows program gt Open a file in its associated Windows program gt Display a customized folder of Windows programs and or files from which to choose Fn esse also has several keys known as hot keys that perform preassigned operations For more information see Hot Keys on page 210 You can assign any key that is not associated with a hot key or a keyboard overlay Starting Fn esse You can access Fn esse in one of two ways Click Start All Programs Toshiba Utilities and Fn esse Click the Fn esse icon The Fn esse keyboard appears amp Fn esse Assignments Options Help Sample Fn esse keyboard The keys are colo
10. 4 Inthe Running on batteries section click Details The mode Properties window appears 5 Click the Alarm tab and set the alarm s as desired Turning off the display automatically To save power it s a good idea to set the display to turn off automatically when you re not using the computer You can do this in several ways Use the Display Properties to enable the blank screen saver Use the Power Saver Properties to turn off the LCD panel after a certain amount of time has passed Enabling the screen saver 1 Click Start Control Panel Click Appearance and Themes Click Display The Display Properties window appears 4 Click the Screen Saver tab Mobile Computing O Changing the battery Display Properties Themes Desktop ScreenSaver Appearance Settings Screen saver Windows xP v Settings Wait 10 minutes On resume password protect Monitor power To adjust monitor power settings and save energy A click Power Sample Display Properties window with Screen Saver tab displayed 5 Inthe section labeled Screen Saver select the screen saver of your choice 6 Inthe Wait window click the up and down buttons to set the number of minutes of inactivity before the display turns off automatically 7 Click Apply then OK Changing the battery L r f options plug in the AC Adapter or install a fresh battery TECHNICAL NOTE To avoid losing any data save y
11. Check that the monitor s power cable is firmly plugged into a working power outlet Check that the cable connecting the external monitor to the computer is firmly attached Try adjusting the contrast and brightness controls on the external monitor Press Fn and F5 simultaneously to make sure the display priority is not set for the built in screen The screen does not look right You can change the display settings by clicking a blank area of the desktop with the secondary control button then clicking Properties This opens the Display Properties dialog box The Appearance tab of this dialog box allows you to choose the colors for the screen The Settings tab allows you to choose the screen resolution The built in screen flickers Some flickering is a normal result of the way the screen produces colors To reduce the amount of flickering try using fewer colors To change the number of colors displayed 1 Point at the desktop and click with the secondary button 1 90 lf Something Goes Wrong Resolving a hardware conflict 2 Click Properties and then the Settings tab 3 Change the Colors option and click OK For more information see Windows Help A message tells you that there is a problem with your display settings and that the adapter type is incorrect or the current settings do not work with your hardware Reduce the size of the color palette to one that is supported by the computer s internal disp
12. ccccecceeseeees 88 Charging batteries 89 Charging the batteries cee eeeeeeen 90 Using a battery Charger 91 Monitoring battery DOWER cceecceeeeseeeeeeeneees 91 Determining remaining battery power 92 What to do when the battery runs low 92 Conserving battery DOWEL ccs ecceeeeseeeeeeeeees 93 setting a power usage Mode 94 Using battery alarMS icnn 95 Setting battery alarms 95 Turning off the display automatically 8 96 Enabling the screen Saver cscs 96 Changing the battery eeen 97 Removing the battery from the computer 98 Inserting a charged battery ou cece 99 Disposing of used batteries safely 100 Iraveling UPS eee ee ee 100 Contents d 7 Chapter 5 Expansion Options ee 102 Using your computer at the office 102 Using the optional external USB diskette drive 103 Connecting the optional external USB diskette AY Gi ecacoreiotacsnecesncuendovecuetarengseectneetacaasanes 103 Using an optional external DVD ROM drive 104 Connecting the optional external DVD drive 104 Using external display devices cceeeeeeeeeees 104 Directing the display output when you turn on the CO DULG Ie snececatnssesacaunrceseseatscnsousccacaao accor 105 Adjusting the quality of the external display 105 Display limitations occ 106 Using tablet MOde cenen 106 Preparing to use the tablet 106 Using tablet MOde nenn 108 Using t
13. on page 95 Many programs offer a feature that saves documents at regular intervals such as every 15 minutes Check your programs documentation to see whether they have an automatic save feature To save A file you are updating open the program s File menu and click Save A new file choose Save As from the File menu type a name for the file and click OK HINT To make another copy of the file you are currently working with choose Save As from the File menu and give the new file a different name Learning the Basics 13 Printing your work Printing your work Va 2 a your printer as described in Setting up a printer on page 60 TECHNICAL NOTE You only need to set up the printer the first time you connect it If you use more than one printer or are changing printers you will need to set up the operating system to run with the additional printer s To print a file 1 If your printer is not on turn it on now 2 Inthe File menu of your program click Print The program displays a Print dialog box 3 Click OK to print Using diskettes To use diskettes you must connect the optional external USB diskette drive to the USB port on the back of the computer See Using the optional external USB diskette drive on page 103 for more information Inserting and removing diskettes 1 Insert a diskette into the insertion slot until it clicks in place A protect
14. Control Panel Administrative Tools 2 Click the Computer Management icon 3 Select the specific device from the device category 4 In the toolbar look to the far right for an icon of a monitor with a strike mark through a circle on the front This is the disable feature 5 Click the icon You are given the option of disabling the device 6 Click yes or no whichever is appropriate Checking device properties Device Manager provides a way to view the properties of a device Properties include the name of the manufacturer the type of device the drivers installed and the system resources assigned to the device lf Something Goes Wrong 1 85 Resolving a hardware conflict To check a device s properties 1 p 3 4 Click Start Control Panel Administrative Tools Click the Computer Management icon Click the Device Manager button To view the device s installed double click the device type To view the properties double click the device The operating system displays the Device Properties dialog box which provides an array of tabs They include The General tab which provides basic information about the device The Resource tab which lists resources assigned to the monitor optional external diskette disk drive and other power using functions The Drivers tab which displays the drivers being used by the device A Troubleshooting button is also present Click troubleshooting A Help and S
15. Devices with Removable Storage Tay 4 DVD Drive E Q a Removable Disk F Qa aii Network Drives Windows XP Professional Tea Evaluation copy Build 2526 Er i J 5 48PM Sample toolbar locations 1 2 4 Enhancing Productivity Personalizing your desktop The elements you can add to the top of the window are Toolbar element Description Address Bar Opens Web pages programs folders or documents By default the address bar shows your current location and whether it is a folder or a Web page You can browse to another location by typing an address a URL a path or even a pro gram name If you start typing a previously typed address the AutoComplete feature fin ishes the address for you Standard buttons Displays buttons for commonly used commands such as copying pasting deleting items changing views and browsing backward and forward Displaying a toolbar in a window 1 Click Start then click My Computer The My Computer window appears 2 On the View menu point to Toolbars then click the name of the toolbar you want to display The toolbar appears below the menu bar of the current window Displaying information about each folder In addition to displaying the contents of each window you might find it helpful to have the operating system display the name of the folder and brief information about how to use the folder This means displaying an individual window as a
16. Fn a This hot key increases the screen brightness 216 Wireless device enable disable Fn A N This hot key enables and disables the optional wireless devices installed in your computer Wireless device enable disable The wireless modes are All disabled tThis disables both the Bluetooth and Wi Fi modules Wi Fi enabled tThis enables just the Wi Fi module Bluetooth enabled tThis enables just the Bluetooth module see Using Bluetooth on page 131 All enabled tThis enables both Bluetooth and W1 Fi Sd hesa Disabling or enabling the TouchPad Fn a This hot key disables or enables the TouchPad To use the TouchPad see Using the TouchPad on page 54 Sample disable and enable TouchPad window Pr ihe 21 Keyboard hot keys F10 _ 5 This hot key turns the cursor control overlay on and off Fn This hot key turns the numeric overlay on and off F12 Fn s This hot key turns the scroll lock feature on and off Appendix B Power Cable Connectors Your notebook computer features a universal power supply you can use worldwide This appendix shows the shapes of the typical AC power cable connectors for various parts of the world USA and Canada United Kingdom gt UL approved CSA approved BS approved Australia Europe VDA approved AS approved NEMKO approved 218 Glossary Ma Acronyms TECHNICAL NOTE Some fe
17. My browser can t find a site I bookmarked The World Wide Web is constantly changing A site you bookmarked yesterday may not be available today or its server may be down to temporary repair Try again later DVD operating problems If you experience a problem playing DVDs you may be able to fix the problem yourself For general problems playing a DVD title try the following Steps 1 Check that the disc is in a format that the drive supports DVD ROM Ensure that the disc is properly inserted in the drive tray Ensure that the Display properties are not True Color 24 bit If it is set to 24 bit color there will be a video format error To verify your display settings Click Start Control Panel Appearance and Themes and double click Display 200 If Something Goes Wrong DVD operating problems gt h Sd Click on the Settings tab and check the Color Palette It should be set to High Color 16 bit If it is not set to High Color change the settings to 16 bit color and click OK Clean the disc and try again A dirty drive can also cause audio problems If you have tried several discs and all fail consider sending your drive to an authorized service provider to get it cleaned Verify that your computer recognizes your DVD ROM drive To do this Double click the My Computer icon on the desktop The DVD ROM drive should appear in the list See Checking device properties on page
18. See the documentation supplied with the device for additional configuration steps TECHNICAL NOTE In order to use the simultaneous mode you must set the resolution of the internal display panel to match the resolution of the external display device The external display device must support a resolution of 640 X 480 or higher L 106 Expansion Options Using tablet mode Display limitations Keep in mind that the quality of the display will be limited to the capabilities of the external video device If the external video device such as an SVGA monitor is capable of displaying at a maximum resolution of 640 x 480 and your system is set for a higher resolution only part of the desktop will appear on the screen You can view the lost area by scrolling to it If you use the display hot key Fn F5 to change the display output with the LCD Display Stretch option enabled and the Display area resolution set to 640 x 480 or 800 x 600 the image on the internal display panel may appear stretched Using tablet mode One of your computer s features is a convertible display that allows you to use the screen much as you would a writing tablet Your computer came with applications already installed specifically designed to work with the tablet feature of the system For more information on those applications see the documentation provided with them Preparing to use the tablet 1 2 P
19. default Enabled may cause feedback Revert to the default settings PC Card problems PC Cards PCMCIA compatible include many types of devices such as a removable hard disk additional memory or a pager Most PC Card problems occur during installation and setup of new cards If you re having trouble getting one or more of these devices to work together several sections in this chapter may apply Resource conflicts can cause problems when using PC Cards See Resolving a hardware conflict on page 181 Card Information Structure When you insert a PC Card into a slot the computer attempts to determine the type of card and the resources it requires by reading its Card Information Structure CIS Sometimes the CIS contains enough information for you to use the card immediately lf Something Goes Wrong 1 O5 Resolving a hardware conflict Other cards must be set up before you can use them Use the Windows XP PC Card PCMCIA Wizard to set up the card Refer to your Microsoft documentation for more information or refer to the documentation that came with the PC Card Some card manufacturers use special software called enablers to support their cards Enablers result in nonstandard configurations that can cause problems when installing the PC Card If your system does not have built in drivers for your PC Card and the card did not come with an operating system driver it may not work under the operating syste
20. 091 RAM random access memory RFI radio frequency interference ROM read only memory RTC real time clock SCSI small computer system interface SDRAM synchronous dynamic random access memory SRAM static random access memory SVGA super video graphics adapter TFT thin film transistor USB universal serial bus URL uniform resource locator WAN wide area network www World Wide Web Terms The following terms may appear in this user s guide A active matrix display A liquid crystal display LCD made from an array of liquid crystal cells using active matrix technology Also known as a TFT display in its simplest form there is one thin film transistor TFT for each cell This type of display works well with notebook computers because of its shallow depth and high quality color Active matrix displays are viewable from wider angles than most passive matrix displays adapter A device that provides a compatible connection between two units For example the computer s internal display adapter receives information from the software and translates it into images on the screen An adapter can take a number of forms from a microprocessor to a simple connector An intelligent adapter one that is capable of doing some processing may also be called a controller alternating current AC The type of power usually supplied to residential and commercial wall outlets AC reverses its direction at regular intervals C
21. 157 snagu 219 Standby Mode F3 Fn This hot key puts the computer into Standby mode A message box is displayed by default to confirm that the computer is going into Standby mode You can choose not to display this message box Do vou with to switch the machine to standby Do not show this message in the future Sample Standby confirmation box For more information about Standby mode please see Using Standby on page 144 214 Hibernation mode Hibernation mode F4 Fn This hot key puts the computer into Hibernation mode If Hibernation mode is enabled the default a message box is displayed by default to confirm the computer is going into Hibernation mode You can choose not to display this message box THotkey Do vou wish to switch the machine to hibernation Do not show this message in the future Sample Hibernation confirmation box If Hibernation mode is disabled this hot key will not respond For more information on Hibernation mode see Using Hibernation on page 140 wee 215 Display modes Display modes F5 Fn a0 This hot key cycles through the power on display options The display modes are Built in display panel only Built in display panel and external monitor simultaneously External monitor only Sample display options window Display brightness Fn E This hot key decreases the screen brightness
22. 194 PC Card problems icen 194 Printer problems nccc 197 Modem problems cccccccseeseeseeeesesseeeen 198 Internet Problems ccce 199 DVD operating probleMs cceeecesseeeeeeseees 199 Develop good computing habits 0 202 If you need further assistance 203 DOTORE VOU Call scncese 203 Contacting Toshiba ne 204 Other Toshiba Internet Web sites 01 0000 205 Contents 2 Toshiba s worldwide offices csecsen 206 Appendix A Hot K yS ccccccccssssseeeeeeseesseeeeessaes 210 Volume Mute ccce 210 Password security sxicccedects ctexevedercunseisctncscterascvien 210 Without a password csscccsercecerers 210 With a password cccecceesssseeeeceesseeeeeeeeeens 211 Power usage mode ecese 212 Standby Mode cece ceeecccseccssessssseessseeeesenesns 213 Hibernation mode ccceccessseseesseeesessseeeeeeseees 214 Display modes ccecce 215 Display brightness cccccccccccccecrrn 215 Wireless device enable disable cc cccecee 216 Disabling or enabling the TouchPad 216 Keyboard Not KeyS ou ceececesseescesssseesesseeeeeeesenes 217 Appendix B Power Cable Connectors 218 USA and Canada uu cc ecee ees eeseeeeeeeen 218 United Kingdom ccce 218 Australia 218 1 0 0 eran en ener ee 218 CTT OSSSSt a re 219 AOLE ioc ccecccccccccccccescccscececccaceceeceascecesecausecauseneseeness 235 Introduction Welcome to the world of powerful a
23. Expansion Options 1 090 Using tablet mode 2 Use the Toshiba tablet pen on the tablet as you would any pointing device or pen Writing on the tablet After placing the screen in tablet mode be sure to calibrate the screen using the Tablet and Pen Settings screen There are two ways to open this screen To open Tablet and Pen Settings through the Control Panel 1 Click Start and select Control Panel 2 Click Printers and Other Hardware 3 Click Tablet and Pen settings The Tablet and Pen Settings screen appears 1 1 0 Expansion Options Using tablet mode Tablet and Pen Settings Settings Display Tablet Buttons Pen Options Handedness You can improve handwriting recognition accuracy by indicating whether you are right handed or left handed Right handed O Left handed Menu location fou can select a menu position so that menus don t appear under your hand Right handed menu appears on left Left handed menu appears on right Calibration You can improve the accuracy of your pen by calibrating how the screen displays and responds to the pen You need to calibrate the screen for each orientation Landscape Vv Calibrate Sample Tablet and Pen Settings screen 4 Click the Calibrate button on the Settings tab the default tab displayed and follow the on screen instructions 5 Click OK To open the Tablet and Pen Settings screen through the TOSHIBA Console 1 Cl
24. Other Toshiba Internet Web sites Other Toshiba Internet Web sites toshiba com Worldwide Toshiba corporate site computers toshiba com Marketing and product information in the USA www toshiba ca Canada www toshiba Europe com Europe www toshiba co jp index htm Japan http servicio toshiba com Mexico and all of Latin America 206 lf Something Goes Wrong Toshiba s worldwide offices Toshiba s worldwide offices Australia Austria Toshiba Australia Pty Lim Toshiba Europe GmbH ited Handelskai 388 84 92 Talavera Road 1020 Wien Austria North Ryde NSW 2113 Sydney Australia Belgium Canada Toshiba Information Systems Toshiba Canada Ltd Benelux Belgium B V 191 McNabb Street Excelsiorlaan 40 Markham Ontario B 1930 Zaventem L3R 8H2 Belgium Canada Czech Republic Denmark CHG Toshiba s r o Scribona Danmark A S Hnevkovskeho 65 Naverland 27 61700 Brno DK2600 Glostrup Denmark Finland France Scribona TPC OY Toshiba Systemes France Sinimdentie 14 S A P O Box 83 7 Rue Amp re 02630 ESPOO 92804 Puteaux C dex Finland France Germany Greece Toshiba Europe GmbH Ideal Electronics S A Leibnizstrabe 2 109 Syngrou Avenue D 93055 Regensburg 176 71 Kalithea Germany Athens Greece Hungary Technotrade Kft Szerencs utca 202 1147 Budapest Hungary Italy Progetto Elettronica 92 s r l Viale Certosa 138 20156 Milano Italy Luxembourg Toshiba Information Systems Benelux B V Riv
25. Uniform Resource Locator 84 119 USB Universal Serial Bus hot swapping 28 USB compatible diskette drive connecting 103 keyboard connecting 48 mouse connecting 48 printer connecting 48 using Bluetooth 131 utilities Fn esse 149 Hotkey utility 153 Power Management 157 V volume control 132 volume control dial 27 W warranty SelectServ 25 Web address 84 Web browsers 82 Web content interface 120 Web sites Toshiba 205 943 Wi Fi module 130 Windows Media Player 80 Windows XP Help and Support 181 problem solving 178 special features 118 wireless indicator light 35 wireless features Bluetooth 131 Wi Fi 130 wireless modules Bluetooth 129 Wi Fi 129 wizards Add Printer 60 Backup or Restore 75 Dial Up Networking 81 Internet Connection 85 World Wide Web 82
26. Web page 1 Click Start then click My Computer The My Computer window appears Enhancing Productivity 1 25 Setting up for communications Open the folder you want to view as a Web page In the Tools menu select Folder Options In the Tasks section click the button for Show common tasks in folders 5 Click Apply then OK amp Control Panel E fel File Edit View Favorites Tools Help ay Q Back S pe Search Key Folders m Address Control Panel v SE Links Vg Control Panel Pick a category GB Switch to Classic View Ta _ Appearance and Themes Printers and Other Hardware See Also Windows Update A 9 Help and Support Network and Internet Connections User Accounts Other Control Panel Options Add or Remove Programs Date Time Language and Regional i Options gt D Sounds Speech and Audio Devices Accessibility Options o Performance and Maintenance Sample Control Panel window as a Web page The addition of the name of the folder and instructions for how to use the folder on the left give the window the appearance of a Web page Setting up for communications In order to connect to the Internet use an online service or communicate across the telephone lines with another computer you need A modem one comes with your computer A telephone line 1 20 Enhancing Productivity Setting up for communications A browser or communications program An Int
27. and keep it for your future reference In case of any trouble with this model please contact your nearest AUTHORIZED service station To prevent direct exposure to the laser beam do not try to open the enclosure Use of controls or adjustments or performance of procedures other than those atl specified in the owners manual may result in hazardous radiation exposure Copyright This guide is copyrighted by Toshiba America Information Systems Inc with all rights reserved Under the copyright laws this guide cannot be reproduced in any form without the prior written permission of Toshiba No patent liability is assumed however with respect to the use of the information contained herein 2002 by Toshiba America Information Systems Inc All rights reserved Export Administration Regulation This document contains technical data that may be controlled under the U S Export Administration Regulations and may be subject to the approval of the U S Department of Commerce prior to export Any export directly or indirectly in contravention of the U S Export Administration Regulations is prohibited Notice The information contained in this manual including but not limited to any product specifications is subject to change without notice 12 TOSHIBA CORPORATION AND TOSHIBA AMERICA INFORMATION SYSTEMS INC TOSHIBA PROVIDES NO WARRANTY WITH REGARD TO THIS MANUAL OR ANY OTHER INFORMATION CONTAINED HEREIN AND HER
28. and store them in a safe place If your hard disk suddenly fails you may lose all the data on it unless you have a separate backup copy gt hS Use Error Checking and Disk Defragmenter regularly to conserve disk space and help your computer perform at its optimal level Consult your Windows XP operating system documentation for more information on these and other utilities Always use the proper procedure to power off the computer See Powering down the computer on page 134 TECHNICAL NOTE The operating system records information P such as your desktop setup during its shutdown procedure If you A don t let the operating system shut down details such as new icon positions may be lost Using the keyboard Your computer s keyboard contains character keys control keys function keys and special Windows keys providing all the functionality of a full size keyboard Feral 1 Feral Ez a Keyboard Learning the Basics 6 Using the keyboard Character keys Typing with the character keys is very much like typing on a typewriter except that The space bar creates a space character instead of just passing over an area of the page The lowercase letter el and the numeral 1 are not interchangeable The uppercase letter O and the numeral 0 are not interchangeable _ The Caps Lo
29. battery power on page 91 Finding Your Way Around 35 Indicator panels I7 o JIN Hard disk drive light Flashes to indicate that the hard disk is currently in use Wireless indicator light If your computer is fitted with an optional wireless communication system either 802 1 1b now referred to as Wi1 Fi wireless fidelity or Bluetooth this indicator light glows amber when the wireless on off antenna switch is on For more information on connecting to a wireless local area network LAN see Connecting your computer to a network on page 81 Keyboard indicator panel Tose a Indicator i E E e a lights f PETTERI TT OETI T a a a The lights on the keyboard indicator panel provide information about keyboard functions Caps lock light The light on the Caps lock key glows green t when the Caps lock is on Cursor control light Glows green when the cursor control overlay is on When this light is on pressing an overlay key moves the cursor as shown by the white arrow or command printed on the key instead of the letter printed on the top of the key For more information see Using the cursor control overlay on page 71 Nu
30. connection for USB peripherals y DEFINITION USB 2 0 is a peripheral expansion standard that Z Y supports a data transfer rate of up to 480 Mbps for peripherals LK such as keyboards and pointing devices USB peripherals have a single standard for cables and connectors The USB standard also allows hot swapping of peripherals fino Network port Lets you connect the computer to an Ethernet JT LAN local area network Finding Your Way Around 29 Finding where everything is located Right side Hard disk drive cover Security lock slot Hard disk drive cover Covers the computer s hard disk drive W Security lock slot Attaching an optional PORT Noteworthy computer lock cable to the security lock slot lets you anchor your computer to a large heavy object such as your desk For more information see Using a computer lock on page 63 Left side Compact Flash Wireless antenna eject button Modem port on off switch H C ee WS Compact Flash PC card vai SD card slot CF Type II slot PC Card eject button SD indicator ligh Compact Flash eject button Allows easy removal of Compact Flash memory cards Compact Flash CF Type II slot Compact Flash memory is available in 32 64 and 128 and 512 MB sizes PC Card slot A PC Card slot allows you to use Type II PC Cards A sh
31. copy amp Presentation a Super Long Life EE lt ill gt Details About V Show Power Saver Properties icon on the taskbar Q High Power amp DYD Playback TOSHIBA Sample TOSHIBA Power Saver Properties window 1 58 Toshiba Utilities TOSHIBA Console The Power Save Modes tab shows the power usage modes for both AC power Plugged in and battery power Running on batteries You can either use one of the preset modes or create and use your own customized mode The preset modes cannot be deleted By changing the options that appear in the Toshiba Power Saver Properties window and clicking OK you can reconfigure that function Any options that you change become effective when you click either OK or Apply Plugged in section This section has a single preset power usage mode Full Power You can create other AC power modes but Toshiba recommends use of the preset Full Power mode The windows and settings for creating and customizing AC power modes are described below Running on batteries section This section lists the preset modes along with the estimated battery life for each mode The preset modes are Long Life Normal High Power DVD Playback Presentation Super Long Life Although you can change the properties for any of these modes this is not recommended If you need a customized mode create a new mode with the properties you require Toshiba Utilities 1 DO TOS
32. fix file system errors Scan for and attempt recovery of bad sectors 6 Click Start Error checking tests and repairs the disk Your hard disk seems very slow If you have been using your computer for some time your files may have become fragmented Run Disk Defragmenter To do this click Start then click All Programs point to Accessories and System Tools and click Disk Defragmenter Your data files are damaged or corrupted Refer to your software documentation for file recovery procedures Many software packages automatically create backup files You may also be able to recover lost data using utility software Consult your network administrator 1 92 lf Something Goes Wrong Resolving a hardware conflict Some programs run correctly but others do not This is probably a configuration problem If a program does not run properly refer to its documentation and check that the hardware configuration meets its needs A diskette will not go into the optional external diskette drive You may already have a diskette in the drive Make sure the drive is empty You may be inserting the diskette incorrectly Hold the diskette with the hub side facing down and insert it so that the metal head window cover goes into the drive first The metal cover or a loose label may be obstructing the path into the drive Carefully inspect the diskette If the metal cover is loose replace the diskette If the label is loose replace t
33. for human contact during normal operation is minimized The antenna s used in this device are located at the upper edge of the LCD screen and this device has been tested as portable device as defined in Section 2 1093 of FCC rules when the LCD screen is rotated 180 degree and covered the keyboard area In addition Wireless LAN has been tested with Bluetooth transceiver FCC ID CJ6UPA3232BT for co location requirements This device and its antenna s must not be co located or operating in conjunction with any other antenna or transmitter NOTE Changes or modifications made to this equipment not expressly approved by Toshiba or parties authorized by Toshiba could void the users authority to operate the equipment Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy If not installed and used in accordance with the instructions it may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encour
34. improve the accuracy of your pen by calibrating how the screen displays and responds to the pen ou need to calibrate the screen for each orientation Landscape J Tablet and Pen Settings window 164 Toshiba Utilities Tablet and Pen Settings gt e The Settings tab allows you to specify whether you are left handed or right handed the menu location and to calibrate the screen after changing its orientation NOTE You should calibrate your screen each time you rotate it by clicking the Calibrate button on the Tablet and Pen Settings window While the Display tab can be used to change the screen s orientation and adjust screen brightness it is recommended that you use the Toshiba Rotation Utility see page 162 to change the screen s orientation and the Toshiba Power Saver Utility click it s icon in the System Tray to adjust screen brightness The Tablet Buttons tab allows you to specify an action when a display system button is pressed After making your selections click Change chose an Action and then click OK Tablet and Pen Settings Settings Display Tablet Buttons Pen Options Button settings for Primary landscape Button location Detailed view Tablet Button Action Arrow button 1 Up Enter button Enter Arrow button 2 Down Tablet and Pen Settings Tablet Buttons tab Toshiba Utilities 1 65 Tablet and Pen Settings
35. in the MS DOS operating system generally a drive letter followed by a greater than sign indicating where users are to enter commands Toshiba tablet pen The writing instrument used with the tablet It is stored to the left of the screen TFT display See active matrix display universal serial bus USB A serial bus that supports a data transfer rate of up to 12 Mbps 12 million bits per second USB can connect up to 127 peripheral devices through a single all purpose USB port USB allows hot swapping of peripherals See also bus hot swapping serial upload To send a file to another computer through a modem or network See also download USB See universal serial bus USB 234 om utility A computer program designed to perform a narrowly focused operation or solve a specific problem Utilities are often related to computer system management W Web See World Wide Web Wi Fi A trademarked term by the Wireless Capability Ethernet Alliance which stands for Wireless Fidelity Wi Fi is another term for the IEEE 2 11b communication protocol to permit an Ethernet connection using wireless communication components World Wide Web www The worldwide network of Web sites linked together over the Internet A user of the Web can jump from site to site regardless of the location of the computer hosting the site See also Internet Index A AC adapter DC IN 28 plugging in 28 AC powe
36. key you just selected To open a popup list showing the items in that folder press Fn plus the appropriate key from within any Windows program Viewing existing key assignments To view the existing key assignments choose Assignments from the Fn esse keyboard Fn esse displays the Function Key Assignments dialog box This box lists all the key assignments and the program or document to which each key is assigned To view items in a popup list click the Expand popup lists check box Changing or removing existing key assignments 1 Inthe Fn esse keyboard click the key you wish to change with the secondary button Fn esse displays the Assignment Type dialog box 2 To change the key assignment click Direct or Popup and continue as if you were creating a new assignment 3 To remove the key assignment click Clear Hotkey utility The hotkey utility allows you to receive a confirmation message when you use the hot key combination for Standby Fn F3 and Hibernation Fn F4 To activate the utility 1 Click Start then click Hotkey utility The Hotkey window appears 1 D 4 Toshiba Utilities TOSHIBA Console Toshiba Hotkey Vv Display a Standby confirmation message if Fn F3 is pushed r Display a Hibermation confirmation message if Fn F 4 i pushed Cancel Sample Toshiba Hotkey utility window 2 Puta check mark next to the desired option 3 Click OK TOSHIBA Console The TOSHIBA Console provides qu
37. minutes the battery may have reached the end of its useful life Try replacing it The battery appears not to power the computer for as long as it usually does If you frequently recharge a partially charged battery it may not charge fully Let the battery discharge completely then try charging it again Check the power options using the Power Management utility Have you added a device such as a PC Card or memory module that takes its power from the battery Is your software using the hard disk more Is the display power set to turn off automatically Was the battery fully charged to begin with All these conditions affect how long the charge lasts For more information on maximizing battery power see Charging batteries on page 89 1 88 lf Something Goes Wrong Resolving a hardware conflict Keyboard problems If when you type strange things happen or nothing happens the problem may be related to the keyboard itself The keyboard produces unexpected characters A keypad overlay may be on If the numlock light or cursor control mode light is on press Fn and F10 simultaneously to turn off the cursor control mode light or Fn and F11 simultaneously to turn off the numlock light If the problem occurs when both the keypad overlays are off make sure the software you are using is not remapping the keyboard Refer to the software documentation and check that the program does not assign different meanings to any of
38. necessary adapters plug the cable from the headphones or external speakers into the headphone jack The headphone jack requires a 16 ohm stereo mini jack To adjust the volume For external speakers use the volume controls on each speaker For headphones use the computer s volume control dial Enhancing Productivity 1 33 Using audio features Recording sounds The external microphone may be used with other software to record monaural audio sounds and save them as digital audio WAV files on disk P7 DEFINITION A WAV pronounced wave file is one of the formats for storing sound in files LS You may also record sounds as WAV files by connecting an external microphone or other sound source to the microphone jack Using a microphone 1 Connect an external microphone to the computer 2 Click Start point to All Programs Accessories Entertainment then click Sound Recorder Z Sound Sound Recorder File Edit Effects Help Position Length Positioning 0 00 sec 0 00 sec bar E 1s Record Stop Play Skip forward Skip backward Sample Sound Recorder screen 1 3 4 Enhancing Productivity Powering down the computer 3 Click the Record button and speak normally into the microphone NOTE You can only record 60 seconds at a time When you have finished recording click the Stop button J 5 To hear what you just recorded click the Play button
39. not installed and used in accordance with the instructions it may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment to an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help NOTE Only Peripherals complying with the FCC Class B limits may be attached to this equipment Operation with noncompliant peripherals or peripherals not recommended by Toshiba is likely to result in interference to radio and TV reception Shielded cables must be used between the external devices and the computer s or expansion unit s serial port parallel port monitor port USB port PS 2 port i LINK port and microphone jack Changes or modifications made to this equipment not expressly approved by Toshiba or parties authorized by Toshiba could void the user s authority to operate the equipment This device complies with Part 15 of the FCC Rules Operation is subject to the following
40. right side up and lock the battery into place using the battery lock Reconnect any cables Restart the computer 10 Mobile Computing Traveling tips Disposing of used batteries safely You can recharge a battery many times so it should last for years When the battery needs replacing the battery light flashes amber shortly after you have fully recharged the battery You must discard a battery if it becomes damaged CAUTION The battery is a lithium ion Li ion battery which can explode if not properly replaced used handled or disposed of Putting spent batteries in the trash is not only irresponsible it may be illegal Dispose of the battery as required by local ordinances or regulations Use only batteries recommended by Toshiba The materials that came with your computer may include an insert regarding the disposal of batteries If not check with your local government for information on where to recycle or dispose of old batteries Traveling tips The environmental precautions listed in Selecting a place to work on page 38 also apply while traveling Never leave your computer on a sunny ledge or in a place where it could get splashed with moisture or covered in dust gt h S Always travel with the computer in a carrying case Toshiba offers a choice of carrying cases for the computer They all provide plenty of extra space for Mobile Computing 1 0 Traveling tips manuals pow
41. screen that represents a function file or program interlaced A method of refreshing a computer screen in which only every other line of pixels is refreshed Interlaced monitors take two passes to create a complete screen image Compare non interlaced internal device See device Internet The decentralized world wide network of computers that provides electronic mail the World Wide Web and other services See also World Wide Web K keyboard shortcut A key or combination of keys that you use to perform a task instead of using a pointing device such as a mouse kilobyte KB A unit of data equal to 1024 bytes See also byte L L1 level one cache Memory cache built into the processor to help improve processing speed See also cache CPU cache L2 cache w 229 L2 level two cache Memory cache installed on the motherboard to help improve processing speed It is slower than L1 cache and faster than main memory See also cache CPU cache LI cache LAN local area network A group of computers or other devices dispersed over a relatively limited area and connected by a communications link that enables any device to interact with any other on the network liquid crystal display LCD A type of display that uses a liquid substance between two transparent electrode panels When an electric current passes through the electrodes the molecules in the liquid form a crystalline pattern that p
42. the keys You ve connected an external keyboard and the operating system displays one or more keyboard error messages The keyboard you connected may be defective or incompatible with the computer Try using a different make of keyboard Nothing happens when you press the keys on the external keyboard You may have plugged the external PS 2 keyboard in while the computer was turned on Click Start Shut Down or Turn off computer and Restart the computer using the TouchPad on the internal keyboard The computer will restart and recognize the device Display problems Here are some typical display problems and their solutions The screen is blank Display Auto Off may have gone into effect Press any key to activate the screen lf Something Goes Wrong 1 89 Resolving a hardware conflict You may have activated the instant password feature by pressing Fn and F1 simultaneously If you have registered a password press any key type the password and press Enter If no password is registered press any key The screen reactivates and allows you to continue working If you are using the built in screen make sure the display priority is not set for an external monitor To do this press Fn and F5 simultaneously once If this does not correct the problem press Fn and F5 simultaneously again to return the display priority to its previous setting If you are using an external monitor Check that the monitor is turned on
43. traveling you need a dial up connection Ask your network administrator for the telephone number of the network To set up the connection use the Dial Up Networking Wizard 1 Click Start and point to All Programs 2 Point to Accessories then to Communications and click Network Setup Wizard or Network Connections 3 Enter the phone number of your network connection and let the program dial the number 82 Learning the Basics An overview of using the Internet The computer connects with the network An overview of using the Internet The following sections give a quick introduction to the Internet and some of its exciting features under these headings The Internet The World Wide Web Internet Service Providers Connecting to the Internet Surfing the Internet Internet features Uploading and downloading files from the Internet The Internet The Internet is an association of thousands of networks and millions of computers around the world connected by communications lines They all work together to share information The World Wide Web The World Wide Web or Web is a subset of the Internet a collection of interlinked documents located on computers connected to the Internet that work together using a specific Internet protocol called Hypertext Transfer Protocol HTTP The World Wide Web offers information as text images audio or video to be referenced from anywhere in the worl
44. you can easily attach an external monitor to your computer if you need a larger screen To do this 1 Connect the monitor s video cable to the RGB monitor port on the back of the computer 2 Connect the monitor s power cable to a live electrical outlet Turn on the external monitor 4 Set the display mode by pressing Fn F5 or by setting the Display Properties settings For more information see Directing the display output when you turn on the computer on page 105 Expansion Options 1 05 Using external display devices Directing the display output when you turn on the computer Once you ve connected an external display device you can choose to use the internal display only the external device only or both simultaneously The quickest way to change the display output settings is to use the display hot key Fn F5 1 Press Fn and F5 simultaneously 2 While holding down Fn press F5 repeatedly until the setting you want takes effect This hot key cycles through the settings in the following order Built in display panel only Built in display panel and external monitor simultaneously External monitor only 3 Release the Fn key TECHNICAL NOTE You can also change these settings using the L Display Properties Box Z Adjusting the quality of the external display To obtain the best picture quality from your external display device you may need to adjust the video settings
45. 00 feet If your computer is equipped with Bluetooth and you want to enable the Bluetooth module 1 Flip the wireless antenna on off switch to the on position The antenna is enabled 2 Hold down the function key Fn and press F8 until the Bluetooth icon is highlighted 3 Release the keys Bluetooth is now enabled NOTE Your Bluetooth module is based on the Bluetooth specification version 1 1 Toshiba cannot confirm all compatibility with PC products and or electronic devices using Bluetooth other than Toshiba mobile PCs 1 3 Enhancing Productivity Using audio features Using audio features Your computer is equipped with a built in monaural speaker The computer plays sounds through the internal speaker It uses the sound settings in your operating system except for the system speaker which is configured by the Toshiba System utility To adjust the volume click the speaker icon in the taskbar Using external speakers or headphones Your computer is equipped with a sound system with internal speakers Instead of using the internal speakers you can connect headphones or a pair of external stereo speakers we TECHNICAL NOTE Use amplified speakers that require an P external power source Other types of speakers will be inadequate 5 to produce sound from the computer To play back sound files through headphones or external speakers AQ 1 Locate the headphone jack on the computer 2 Using any
46. 184 for instructions on using Device Manager to view the DVD ROM properties Check the Toshiba Web site for new information on DVD ROM drives and their operation A blank screen appears while watching a DVD ROM movie or title Disable the Shut off Monitor feature in the Display Properties using the following steps 1 Click the secondary mouse button on a blank area of the desktop Click Properties Click the Screen Saver tab Deselect Shut off Monitor Jumping video lines appear around the DVD ROM video window To change the screen s display resolution 1 Click Start Control Panel The Control Panel window appears lf Something Goes Wrong 201 DVD operating problems 2 Click Appearance and Themes and double click the Display icon The Display Properties dialog box appears Click the Settings tab Next to the words Desktop Area move the slider to a lower setting such as 800 x 600 or 640 x 480 5 Click OK DVD titles games or applications appear distorted Having Stretch enabled when your video resolution is set to 640 x 480 or 800 x 600 can cause distortion To disable Stretch follow the instructions below 1 Right click the Desktop select Properties Select the Settings tab Select the Advanced Flat Panel tab Click Disable Display Stretch Feature Click OK The screen saver runs while you are watching a movie or title If the screen saver is enabled it runs on top of any movie o
47. 190 checking device properties 184 computer hangs when PC Card inserted 196 computer will not power up 177 corrupted damaged data files 191 Device Manager 184 disabling a device 184 disk drive is slow 191 display is blank 188 external display not working 190 external monitor 189 faulty memory 185 hardware conflict 181 182 high pitched noise 194 illegal operation 176 Internet bookmarked site not found 180 Internet connection is slow 180 keyboard not responding 177 missing files trouble accessing a disk 190 modem not receiving or transmitting 198 no sound 194 non system disk or disk error 178 192 PC Card 194 checklist 195 error occurs 196 hot swapping fails 196 not recognized 196 slot appearsdead 195 power and batteries 186 printer 197 program not responding 175 program not working properly 192 screen does not look right flickers 189 Startup options 179 system resources 182 trouble prevention 202 URL address not found 180 warning resume failure 178 Windows won t start 178 Windows XP not working 178 programs not running correctly 192 starting 71 Web browsers 82 R real time clock RTC battery 87 recording adjusting quality 134 recording sounds 133 Recovery CDs 24 transferring application files 129 registering computer 57 remaining battery power 92 removing PC Cards 30 113 m 24 Restart command 135 restoring work 76 RGB monitor port 28 RJ11 modem jack connecting telephone cable 50 S s
48. CPU CPU cache A section of very fast memory residing between the CPU and the computer s main memory that temporarily stores data and instructions the CPU will need to execute commands and programs See also cache LI cache L2 cache cursor A symbol that indicates the current position on the screen The shape of the cursor varies depending on the program you re using and what you re doing D default The setting selected by a program when the user does not specify an alternative setting device A component attached to the computer Devices may be external outside the computer s case or internal inside the computer s case Printers disk drives and modems are examples of devices device driver A program called a driver that permits a computer to communicate with a device dialog box An on screen window displayed by the operating system or a program giving a direction or requesting input from the user direct current DC The type of power usually supplied by batteries DC flows in one direction Compare alternating current AC wn 225 direct memory access DMA A dedicated channel bypassing the CPU that enables direct data transfer between memory and a device directory See folder disable To turn a computer option off See also enable disc A round flat piece of metal designed to be read from and written to by optical laser technology and used in
49. EBY EXPRESSLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE WITH REGARD TO ANY OF THE FOREGOING TOSHIBA ASSUMES NO LIABILITY FOR ANY DAMAGES INCURRED DIRECTLY OR INDIRECTLY FROM ANY TECHNICAL OR TYPOGRAPHICAL ERRORS OR OMISSIONS CONTAINED HEREIN OR FOR DISCREPANCIES BETWEEN THE PRODUCT AND THE MANUAL IN NO EVENT SHALL TOSHIBA BE LIABLE FOR ANY INCIDENTAL CONSEQUENTIAL SPECIAL OR EXEMPLARY DAMAGES WHETHER BASED ON TORT CONTRACT OR OTHERWISE ARISING OUT OF OR IN CONNECTION WITH THIS MANUAL OR ANY OTHER INFORMATION CONTAINED HEREIN OR THE USE THEREOF Trademarks Port g Noteworthy Fn Esse and InTouch are registered trademarks SelectServ is a trademark of Toshiba America Information Systems Inc and or Toshiba Corporation CompuServe is a registered trademark of America Online Inc Dolby Manufactured by Toshiba under license from Dolby Laboratories Dolby and the double D symbol are trademarks of Dolby Laboratories Microsoft Windows DirectX and DirectShow are registered trademarks and Windows Media is a trademark of Microsoft Corporation PS 2 is a registered trademark of International Business Machines Corporation Wi Fi is a trademark of the Wireless Capability Ethernet Alliance Bluetooth is a trademark owned by its proprietor and used by Toshiba under license Symbol Commander is a trademark of Sensiva inc All other brand and product names are trademarks or re
50. For most users this is all the password security you ll need CAUTION Make sure you use a password you can remember easily If you ever forget your password contact your network administrator Setting a user level password To set register a user level password 1 Click Start Control Panel and click Toshiba HWSetup 2 Open the Password tab 3 Click Registered A Password dialog box appears 4 Type in the password and click OK 5 Reenter the password and click OK 6 Click OK at the bottom of the HWSetup window Your user password is now in effect Use it when you start the computer power on password Disabling the user level password To delete a user level password 1 68 Keeping Your Files Safe Using passwords in the Windows operating system fe 1 Click Start Control Panel and click Toshiba HWSetup Open the Password tab Click Not Registered A Password dialog box appears 4 Type in the password and click OK Click OK at the bottom of the HWSetup window The user password is disabled Using the power on user level password Whenever you start your computer with a power on user level password in effect the computer prompts you to enter the password before it goes through its normal startup procedure When your computer prompts you to enter your password type it in and press Enter If you enter the password correctly the computer continues with its normal startup procedu
51. HIBA Console Creating a new power mode 1 Highlight one of the preset modes 2 Click Create copy 3 A new mode appears with the title Copy Name where Name is the title of the mode you copied Delete this title type in the name for your new power mode then press Enter Customizing a power mode 1 Highlight the mode on the Power Save Modes window 2 Click Details The Properties window for the selected mode opens with the General tab displayed This tab enables you to choose an icon for your power usage mode describe the mode s characteristics and optionally associate it with a program The Name field displays the name assigned to the mode in the Power Saver Properties window You can change the name here if you wish 1 60 Toshiba Utilities TOSHIBA Console Toshiba Hardware Setup Toshiba Hardware Setup is the Toshiba configuration management tool To access it In the TOSHIBA Console click the Toshiba Hardware Settings icon amp TOSHIBA HWSetup CPU BootPriority Keyboard USB LAN General Password Device Config Display F TOSHIBA Hw Setup program allows you to configure your id computer Setup BIOS Version 1 00 09 20 2002 Sample TOSHIBA HWSetup window The TOSHIBA HWSetup window appears with tabs for the following Boot Priority Allows you to set the order of priority by which the machine searches for a device to boot from in addition to changing the network bo
52. ICAL NOTE If your computer is connected to a network L the Startup menu may display different versions of Safe mode f Internet problems My Internet connection is very slow Many factors contribute to the speed with which you can surf the Internet They include modem speed time of day when everyone else is surfing your access can be slow and popularity of the site If accessing a particular site is very slow try later My browser can t find the URL address I typed in Make sure you separated the domain names of the address with the forward slash Check the spelling of each name and the syntax of the address carefully A single incorrect letter or missed character comma instead of period dot or other mistake makes it impossible for your browser to locate the site My browser can t find a site I bookmarked The World Wide Web is constantly changing A site you bookmarked yesterday may not be available today or its server may be down for temporary repair Try again later lf Something Goes Wrong 1 BT Resolving a hardware conflict The Windows XP operating system can help you If the operating system has started properly but you still have a problem using your computer the online Help can assist you in troubleshooting the problem To access Windows XP Help and Support 1 Click Start then click Help and Support The Help and Support window appears 2 Then do one or both of the following
53. Make sure you installed the proper printer drivers as shown in Setting up a printer on page 60 You may have connected the printer while the computer is on Disable Standby mode turn off the computer and turn off the printer Turn the printer back on make sure it is on line then turn the computer back on Try printing another file For example you could create and attempt to print a short test file using Notepad If a Notepad file prints correctly the problem may be in your original file If you cannot resolve the problem contact the printer s manufacturer The printer will not print what you see on the screen Many programs display information on the screen differently from the way they print it See if your program has a print preview mode This mode lets you see your work exactly as it 1 98 lf Something Goes Wrong Resolving a hardware conflict will print Contact the software manufacturer for more information Modem problems This section lists common modem problems The modem will not receive or transmit properly Make sure the cable from the modem to the telephone line 1s firmly connected to the computer s modem port and the telephone line jack Check the port settings to make sure the hardware and software are referring to the same COM port See Determining the COM port on page 126 Check the communications parameters baud rate parity data length and stop bits specified in the communicati
54. N To save the file select Save from the File menu Adjusting recording settings The better the quality of the recording the more disk space the sound file requires Experiment to find a balance that fits your needs 1 Open Sound Recorder if necessary click Start point to All Programs Accessories Entertainment then click Sound Recorder 2 Inthe Sound Recorder window click Edit then click Audio Properties 3 Inthe Audio Properties dialog box adjust the Recording Volume and Preferred device 4 Click OK Your new settings take effect the next time you record Powering down the computer When you power down the computer you have a number of options to choose from gt Turn Off or Shut down which power off the computer gt h Sd Hibernation which saves the current operating state to the hard disk and powers off the computer Standby which saves the current operating state to memory and enters a low power mode Enhancing Productivity 1 35 Powering down the computer we Restart which restarts the computer Each option has its advantages MA TECHNICAL NOTE Before using any of these options to power down your computer save your files and make sure the disk activity lights are off If you change your mind and decide to continue working after all wait a few seconds before turning the computer on again Turn Off or Shut down command The Turn Off or Shut dow
55. OFF Cancel Sample Turn off computer window with shift key held down to show Hibernate option 2 Hold down the shift key and click Hibernate Hibernate only appears when the shift key is pressed The computer saves the state of the system including all open programs and files to the hard disk and then powers down completely If you are connected to a Windows network server domain server follow these steps to power down the computer using Hibernation 1 Click Start then Shut Down The Shut Down window appears 2 Select Hibernate from the drop down list of options 3 Click OK The computer saves the state of the system including all open programs and files to the hard disk and then powers down completely Going into Hibernation mode more quickly You can also put the computer into Hibernation mode in three ways By pressing the hotkey combination Fn F4 By pressing the power button 1 4 4 Enhancing Productivity Using Standby By closing the display panel Starting again from Hibernation To start up the computer from Hibernation mode press and release the power button until the on off icon glows green The computer returns to the screen you were using If you went into Hibernation mode by closing the display panel you can start the computer again by opening the display panel Using Standby If you are not connected to a Windows network server domain server power down the comput
56. OR MALFUNCTION OF THE HARD DISK DRIVE OR OTHER STORAGE DEVICES AND THE DATA CANNOT BE RECOVERED TOSHIBA SHALL NOT BE LIABLE FOR ANY DAMAGE OR LOSS OF DATA OR ANY OTHER DAMAGE RESULTING THEREFROM WHEN COPYING OR TRANSFERRING YOUR DATA PLEASE BE SURE TO CONFIRM WHETHER THE DATA HAS BEEN SUCCESSFULLY COPIED OR TRANSFERRED TOSHIBA DISCLAIMS ANY LIABILITY FOR THE FAILURE TO COPY OR TRANSFER THE DATA CORRECTLY Critical Applications The computer you have purchased is not designed for any critical applications Critical applications means life support systems medical applications connections to implanted medical devices commercial transportation nuclear facilities or systems or any other applications where product failure could lead to injury to persons or loss of life or catastrophic property damage ACCORDINGLY TOSHIBA ITS AFFILIATES AND SUPPLIERS DISCLAIM ANY AND ALL LIABILITY ARISING OUT OF THE USE OF THE COMPUTER PRODUCTS IN 3 ANY CRITICAL APPLICATIONS IF YOU USE THE COMPUTER PRODUCTS IN A CRITICAL APPLICATION YOU AND NOT TOSHIBA ASSUME FULL RESPONSIBILITY FOR SUCH USE FCC Notice This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if
57. Portege 3500 3505 Series Users Guide If you need assistance InTouch Center Calling within the United States 800 457 7777 Calling from outside the United States 949 859 4273 For more information see If Something Goes Wrong on page 175 TOSHIBA C6632 0902M1 2 Model Port g 3500 3505 Series Compact Disk ReWritable The computer system you purchased may include a Compact Disk ReWritable CD RW one of the most advanced storage technologies available As with any new technology you must read and follow all set up and usage instructions in the applicable user guides and or manuals enclosed If you fail to do so this product may not function properly and you may lose data or suffer other damage TOSHIBA AMERICA INFORMATION SYSTEMS TOSHIBA ITS AFFILIATES AND SUPPLIERS DO NOT WARRANT THAT OPERATION OF THE PRODUCT WILL BE UNINTERRUPTED OR ERROR FREE YOU AGREE THAT TOSHIBA ITS AFFILIATES AND SUPPLIERS SHALL HAVE NO RESPONSIBILITY FOR DAMAGE TO OR LOSS OF ANY BUSINESS PROFITS PROGRAMS DATA OR REMOVABLE STORAGE MEDIA ARISING OUT OF OR RESULTING FROM THE USE OF THE PRODUCT EVEN IF ADVISED OF THE POSSIBILITY THEREOF Protection of Stored Data For your important data please make periodic back up copies of all the data stored on the hard disk or other storage devices as a precaution against possible failures alteration or loss of the data IF YOUR DATA IS ALTERED OR LOST DUE TO ANY TROUBLE FAILURE
58. The computer calculates the remaining battery charge based on your current rate of power use and other factors such as the age of the battery What to do when the battery runs low When the battery runs low you can gt gt Plug the computer into an external power source and recharge the battery Put the computer in Hibernation mode and replace the battery with a charged spare Mobile Computing 93 Conserving battery power Connect the computer to the optional high capacity battery Save your work and turn off the computer If you don t manage to do any of these things before the battery completely runs out of power the computer automatically enters Standby mode and turns itself off Standby mode keeps track of where you were so when you turn on the power again you can continue where you left off The computer stores information on what you were doing until the battery runs out of power If you have Hibernation mode enabled the default the computer copies the details of your open programs and files to the hard disk before shutting down Conserving battery power How long a fully charged battery lasts when you are using the computer depends on a number of factors such as How the computer is configured How much you use the display panel instead of an external monitor How much you use the hard disk and other drives Whether you use any optional devices to which the b
59. Toshiba for use with your computer s batteries The battery light C3 glows amber while the battery is being charged and glows green when it is fully charged A battery may not start charging immediately under the following conditions The battery is extremely hot or cold To ensure that the battery charges to its full capacity wait until it reaches room temperature gt h Sd The battery is almost completely discharged Leave the power connected and the battery should begin charging after a few minutes The battery charges the RTC battery During normal use the battery keeps the RTC battery adequately charged Occasionally the RTC battery may lose their charge completely especially if you ve had the computer turned off for a long time To recharge the RTC battery plug the computer in and turn it on for at least 24 hours Mobile Computing OF Monitoring battery power Using a battery charger You can purchase an optional battery charger that recharges batteries without requiring the use of your computer CAUTION Avoid leaving batteries in the battery charger for more than a week at a time Doing so may reduce the potential charge of the battery Use only battery chargers designed to work with your computer and its batteries You can order a Toshiba battery charger through the accessories information sheet or Toshibas Web site at toshibaaccessories com Monitoring battery power The co
60. a tablet pen located at the edge of the screen CAUTION When rotating LCD screen of your computer be sure to Slowly turn the screen in the proper direction and not apply excessive force or speed Getting Started DO Using the computer for the first time Using the computer in tablet mode For more information on using the computer in tablet mode see Using tablet mode on page 106 NOTE Included with your computer is Sensivas Symbol Commander allowing you to quickly execute commands for example changing the layout of the screen from landscape to portrait by drawing a pre assigned symbol on the screen For details on using Symbol Commander refer to the online help with the application Your computer came with applications already installed specifically designed to work with the tablet feature of the system For more information on those applications see the documentation provided with them 60 Getting Started Using the computer for the first time Setting up a printer If you have a printer follow these steps to set it up for the first time You only need to set up the printer once 1 Click Start Printers and Faxes The Printers and Faxes window appears 2 Click Add a Printer The Add Printer Wizard appears Add Printer Wizard Welcome to the Add Printer Wizard This wizard helps you install a printer or make printer connections S Fyou have a Plug and Play printer that connec
61. afe 0 ee 166 Using passwords in the Windows Operating SYSTEM eccerre 166 User level passwordS o oo cece eeeeeseeeeeeteeeeee 167 setting a user level password ecce 167 Disabling the user level password nccc 167 Using the power on user level password 168 Using the instant user level password 168 20 Contents Hard disk drive passwords eeen 169 Setting a hard disk drive master password 170 Setting a hard disk drive user password 172 Deleting the hard disk drive user password 173 Chapter 9 If Something Goes Wrong 6 175 Problems that are easy to fiX 0 0 eceeeeeeeeeseees 175 Problems when you turn on the computer 177 The Windows operating system is not working 178 Using Startup options to fix problems 179 Internet problems eccere 180 The Windows XP operating system can NEID YOU uuu cece csessseeeeessssseeeeeeees 181 Resolving a hardware conflict eee 181 A plan Of action cece cceccessseeeeesessseeeeeeeeens 182 Resolving hardware conflicts on your own 182 Fixing a problem with Device Manager 184 Memory Card problems ccceeeeeeseeeees 185 Power and the batteries cc eeeeeeeeeeeee 186 Keyboard problems cccccceseeeeeeseeeeen 188 Display problems nccc 188 Disk drive problemS ecne 190 Problems with the DVD ROM drive 192 Sound system problems c eee eee e ees
62. afety icons 23 saving your work 72 screen blank 188 doesn t look normal flickers 189 screen saver enabling 96 SD card 30 formatting 116 installing drivers 115 installing in SD slot 115 using 115 using in Hibernation mode 116 using in Standby mode 116 SD slot 30 Search Engine 84 secondary control button 55 security password 166 PORT Noteworthy computer lock cable 29 security lock slot 29 SelectServ 25 setting up computer 43 44 printer 60 Shut down using 137 Shut down command 135 sound problem solving 194 speakers 242 e connecting external 132 Standby command 136 145 Standby mode 136 starting a program 71 starting the computer password 168 Startup menu problem solving 179 stereo headphones 27 system indicator panel 27 32 34 T taskbar customizing 119 toolbars displaying in a window 124 Toshiba Accessories Information 24 Internet Web sites 205 registering computer 57 worldwide offices 206 TOSHIBA Button Controls 156 TOSHIBA Console 154 Toshiba Hardware Setup 160 163 Toshiba online services Toshiba Forum 204 Toshiba tablet pen 108 TouchPad disabling 56 enabling 56 using 54 55 traveling tips 100 troubleshooting DVD player general problems 199 DVD ROM drive 192 external keyboard 188 keyboard 188 keypad overlay 188 Turn Off using 137 Turn Off command 135 138 Turn Off methods 138 turning off the computer 61 U Uniform Resource Locator URL 84 119 uploading 85 URL
63. aged to try and correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the distance between the equipment and the receiver gt gt gt hesa Connect the equipment to an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help TOSHIBA is not responsible for any radio or television interference caused by unauthorized modification of the devices included with this TOSHIBA Wireless LAN Mini PCI Card or the substitution or attachment of connecting cables and equipment other than specified by TOSHIBA 9 The correction of interference caused by such unauthorized modification substitution or attachment will be the responsibility of the user Approved Countries for use This equipment is approved to the radio standard by the countries in Fig 1 Fig 1 Caution Do not use this equipment except in the countries in Fig 1 Caution Bluetooth and Exposure to Radio Frequency Radiation The radiated output power of the Bluetooth Cards from Toshiba is far below the FCC radio frequency exposure limits Nevertheless the Bluetooth Cards from Toshiba shall be used in such a manner that the potential for human contact during normal operation is minimized This device has been tested with Wireless LAN FCC ID CJ6PA3171 WL for co location requirements This device and it
64. attery supplies power Where you are working since operating time decreases at low temperatures Toshiba s power saving options greatly increase the length of time you can use the computer before having to recharge the battery Toshiba has combined these options into several preset power usage modes Q 4 Mobile Computing Conserving battery power Setting a power usage mode NOTE Toshiba recommends that you use the Toshiba Power yom E Management Utility for changing System power settings 1 Click Start Control Panel The Control Panel window appears 2 Click Performance and Maintenance 3 Click the Toshiba Power Saver icon The TOSHIBA Power Saver Properties window appears s TOSHIBA Power Saver Properties Power Save Modes Hibernate The Power Save Modes are a seres of settings for power management You can change which mode your computer is using change the settings for each mode or create custom modes 3 5 Plugged in Pe Power source Create copy AC power Batten remaining _ Delete 100 Life on Standby 101 hours Details Life on Hibernation 26 days Running on batteries Create copy a Super Long Lite a iiil W Show Power Saver Properties icon on the taskbar Cancel Sample TOSHIBA Power Saver Properties window By changing the options that appear in the Power Saver Properties dialog box and clicking OK you can reconfigure that function Mobile Computin
65. atures defined in this glossary may not be available on your computer The following acronyms may appear in this user s guide AC BIOS bps CD CD ROM CD RW CMOS COMI COM2 DC alternating current basic input output system bits per second compact disc compact disc read only memory compact disc rewrite memory complementary metal oxide semiconductor communications port 1 serial port communications port 2 serial port central processing unit direct current 219 DMA DIMM DOS DPI DSTN DVD DVD ROM ECP EPROM FAT FCC FIR GB HDD HTML IEEE VO IRQ ISP KB LAN LCD LPT1 LSI MB MIDI PC PCI PCMCIA 220 om direct memory access dual inline memory module disk operating system dots per inch dual supertwist nematic digital versatile or video disc digital versatile or video disc read only memory enhanced capabilities port erasable programmable read only memory file allocation table Federal Communications Commission fast infrared gigabyte hard disk drive Hypertext Markup Language Institute of Electrical and Electronics Engineers input output interrupt request Internet service provider kilobyte local area network liquid crystal display line printer port 1 parallel port large scale integration megabyte Musical Instrument Digital Interface personal computer Peripheral Component Interconnect Personal Computer Memory Card International Association oer
66. be causing a hardware conflict Resolving hardware conflicts on your own Computer components need resources to accomplish a task A device such as a disk drive or a modem needs a channel to the computer s Central Processing Unit CPU It also needs a direct channel to the computer s memory to store information as it works These channels of communication are commonly referred to as system resources Interrupt Request Channel The channel to the CPU is called an Interrupt Request IRQ because it interrupts what the processor is doing and requests some of the processor s time If two or more devices use the same IRQ the processor does not know which device is asking for attention This causes a hardware conflict Direct Memory Access Similarly the data required by the device is stored in a specific place or address in memory called the Direct Memory Access DMA The DMA provides a dedicated channel for adapter cards to bypass the microprocessor and access memory directly If two or more devices use the same DMA the data required by one device overwrites the data required by the other causing a hardware conflict lf Something Goes Wrong 1 83 Resolving a hardware conflict Plug and Play With Plug and Play and the operating system avoiding hardware conflicts is easy Plug and Play is a computer standard that helps the system BIOS basic input output system and the operating system to automatically assign system res
67. by conserving energy and saving money in the process It has a number of other features that enhance its energy efficiency Many of these energy saving features have been set by Toshiba We recommend you leave these features active allowing your computer to operate at its maximum energy efficiency so that you can use it for longer periods while traveling Running the computer on battery power _ The computer contains a removable lithium ion Li ion battery that provides power when you are away from an AC outlet You can recharge it many times Battery life may vary depending on applications power management settings and features utilized Recharge time 36 Mobile Computing 8 Running the computer on battery power varies depending on usage The battery may not charge while the computer is consuming full power After a period of time the battery will lose its ability to perform at maximum capacity and will need to be replaced This is normal for all batteries To purchase a new battery pack see your accessories information that shipped with your computer or visit the Toshiba Web site at toshibaaccessories com To ensure that the battery maintains its maximum capacity operate the computer on battery power at least once a month until the battery is fully discharged Please see Maximizing battery life below for procedures If the computer is continuously operated on AC power either through an AC adapter or a do
68. ccurs while you are running a program consult the program s documentation for troubleshooting suggestions Contact the software company s technical support group for their assistance Consult your network administrator 204 If Something Goes Wrong If you need further assistance Consult your authorized Toshiba representative who is your best source for current information Contacting Toshiba If you still need help and suspect that the problem is hardware related Toshiba offers a variety of resources to help you 1 Start with accessing Toshiba on the Internet using any Internet browser by typing pcsupport toshiba com 2 Next try one of Toshiba s online services The Toshiba Forum can be accessed through CompuServe by typing go toshiba Toshiba voice contact Before calling Toshiba make sure you have Your computer s serial number The computer and any optional devices related to the problem Backup copies of your Windows operating system and all other preloaded software on diskettes or CD ROM Name and version of the program involved in the problem along with its installation diskettes or CD ROM Information about what you were doing when the problem occurred Exact error messages and when they occurred For technical support call the Toshiba InTouch Center Within the United States at 800 457 7777 Outside the United States at 949 859 4273 lf Something Goes Wrong 205
69. ce and Resolving a hardware conflict on page 181 The computer is not accessing the hard disk or the optional external diskette drive Your computer normally loads the operating system from the hard disk If you have a hard disk problem you will not be able to start the computer Insert a system diskette into the optional external diskette drive and press F12 when the machine starts and use the arrow keys to select the boot up device The computer displays the WARNING RESUME FAILURE message The computer was placed in Stand By mode and the battery has discharged Data stored in the computer s memory has been lost To charge the battery leave the computer plugged into a live wall outlet for several hours For more information see Power and the batteries on page 186 The computer displays the Non System disk or disk error message Make sure there is no diskette in the optional external diskette drive If there is one remove it and press any key to continue If pressing any key does not work press Ctrl Alt and Del to restart the computer The Windows operating system is not working Once you are familiar with the desktop and used to the way the operating system responds to your work routine you can easily detect if the operating system is not working correctly For example lf Something Goes Wrong 1 19 The Windows operating system is not working The operating system fails to start after the Sta
70. cess your hard disk in case you forget the hard disk drive user password If you choose to set a hard disk drive master password you should set it before you set a hard disk drive user password HINT The hard disk drive shipped with your computer may not support the master password feature When you attempt to set master password protection your computer may alert you that this feature is not supported by your drive If this happens and you want to establish a master password for your hard disk contact your network administrator for instructions 170 Keeping Your Files Safe Setting a hard disk drive master password Setting a hard disk drive master password CAUTION If you choose to set a hard disk drive user password we strongly recommend that you set a hard disk drive master password as well If you set a hard disk drive user password and later forget the password or lose your password diskette YOU WILL NEVER BE ABLE TO ACCESS YOUR HARD DISK AGAIN unless you ve set a hard disk drive master password NOTE If you want to set a master password and your system already has a user password you must first remove the user password To set a hard disk drive master password 1 2 Click Start then click Run In the Run box type c Program Files toshiba Windows Utilities HDDPWM HDDPWM and press Enter The Hard Disk Drive Password program HDDPWM displays a warning screen To set a har
71. choosing Hibernation While in Hibernation mode the computer uses no battery power Because the state of the system is held on the hard disk no data is lost if the battery discharges while the computer is in Hibernation mode gt h S When starting up again this choice uses less time and battery power than the Turn Off or Shut down option But it uses a little more time and battery power to start up than the Standby option because information is being retrieved from the hard disk instead of from memory On restarting the computer returns to the state in which you left it and opens all the programs and files you were using Standby command The Standby command puts the computer into a power saving mode Standby stores the current state of the computer in memory so that when you restart the computer you can continue working from where you left off Factors to consider when choosing Standby While in Standby mode the computer uses some battery power If your computer is left in Standby mode for an extended period your computer could lose data Enhancing Productivity 1 3 Using Turn Off or Shut down When starting up again this choice uses less time and battery power than either Turn Off Shut down or Hibernation On restarting the computer returns to the state in which you left it and opens all the programs and files you were using NOTE If you power down using the Standby command a
72. ck key changes only the alphabet keys to upper case the number and symbol keys are not affected The light on the Caps Lock key glows when you press the Caps Lock key Making your keyboard emulate a full size keyboard Although your computer s keyboard layout is compatible with a standard full size keyboard it has fewer keys A standard full size keyboard has two Enter Ctrl and Alt keys editing keys cursor positioning keys and a numeric keypad Pressing the Fn key simultaneously in combination with one of the specially marked keys on your computer s built in keyboard allows you to emulate a full size keyboard NOTE The emulation Fn key is not supported when using a USB keyboard Gil 68 Learning the Basics Using the keyboard Your computer s keyboard has only one Enter and one Ctrl key Most of the time this doesn t matter However some programs assign separate functions to the right and left Ctrl and Alt keys or to the regular and numeric pad Enter keys on the full sized keyboard Using the Fn key you can simulate these separate keys as follows Press Fn and Ctrl simultaneously to simulate the Ctrl key on the right side of the enhanced keyboard Press Fn and Enter simultaneously to simulate the Enter key on the numeric pad of the enhanced keyboard Ctrl Fn and Alt keys EEE Ctrl Fn and Alt keys The Cirl Fn and Alt keys do different things depending on the program you ar
73. cking station if applicable to your system for an extended period more than a month the battery may fail to retain a charge This may shorten the life of the battery and the battery light may not indicate a low battery condition The computer has an internal lithium ion Li ion real time clock RTC battery The RTC battery powers the RTC memory that stores your system configuration settings and the current time and date information It maintains this information for up to a month while the computer is turned off Maximizing battery life To maximize the life of your battery At least once a month disconnect the computer from a power source and operate it on battery power until the battery fully discharges Before doing so follow the steps below 1 Turn off the computer s power 2 Disconnect the AC adapter and turn on the computer s power If it does not turn on go to step 4 3 Operate the computer on battery power for five minutes If the battery has at least five minutes of OO Mobile Computing Running the computer on battery power gt hS h Sd operating time continue operating until the battery is fully discharged If the battery light flashes or there is some other warning to indicate a low battery go to step 4 Connect the AC adapter to the computer and the power cable to a power outlet The DC IN if applicable to your system or AC power light should glow gree
74. communications it means the transmission of more than one bit of information at a time On your computer the parallel port provides a parallel communications interface between the computer and an appropriate device Most modern printers are parallel Compare serial password A unique string of characters entered by a user to verify his or her identity to the computer or the network PC Card A credit card sized expansion card designed to increase the capabilities of notebook computers PC Cards provide functions such as modem fax modem hard disk drive network adapter sound card or SCSI adapter peripheral Any device such as a printer or joystick that is attached to the computer and controlled by the computer s CPU pixel Short for picture element The smallest dot that can be produced on a screen or printer Plug and Play Generally refers to the computer s ability to automatically configure itself to work with peripheral devices When capitalized refers to a standard that when followed by a device manufacturer allows a PC to configure itself automatically to work with the device pointing device Any device such as the TouchPad or a mouse that enables you to move the cursor on the screen port A socket on the computer where you plug in a cable for connection to a network or a peripheral device processor See central processing unit CPU program A set of instructions that ca
75. could destroy it causing the release of toxic fumes Avoid touching the metal terminals of the battery with another metal object Short circuiting the battery will cause it to overheat and may cause permanent damage to the battery or the computer Never incinerate a spent battery as this will cause it to explode and release toxic materials Ifa battery is leaking or damaged replace it immediately Use protective gloves when handling a damaged battery To replace the battery use an identical battery that you can purchase through toshibaaccessories com A reverse polarity condition should be avoided with all batteries The battery is designed so that it cannot be installed to cause reverse polarity Charge the battery only in the computer or in a battery charger designated as an approved option When you install the battery you should hear a click when it is seated properly Do not expose the battery to fire The battery could explode Charging batteries The battery and replacement batteries needs to be charged before you can use them to power the computer You can charge the battery using either your computer or an optional battery charger 90 Mobile Computing Charging batteries Charging the batteries To charge the batteries in your computer plug the computer into a live electrical outlet The batteries charge whether the computer is on or off NOTE Use only the battery charger supplied by
76. cribed in Problems with the DVD ROM drive on page 192 6 Place the disc carefully in the disc tray label side up 18 Learning the Basics Using a DVD drive 7 Gently press the disc onto the center spindle until you feel it click into place CAUTION Handle DVDs and CDs carefully making contact only with the center hole and edge Never touch the surface of the disc Never stack discs If you incorrectly handle the discs you could lose data 8 Make sure the disc is completely on the spindle and is lying flat on the tray CAUTION If you insert the disc incorrectly it may jam the drive If this happens contact your network administrator for assistance e 9 Push the disc tray in by pressing gently on the center of the tray until it clicks into place You are ready to use the disc Playing a CD or DVD For information on playing a disc see Using a DVD drive on page 76 Removing discs CD or DVD To remove a disc with the computer turned on 1 Press the eject button on the drive CAUTION Never press the eject button while the drive in use indicator light is glowing Doing so could damage the disc or the drive Also if the disc is still spinning when you open the disc tray wait for it to stop spinning before you remove it Learning the Basics 19 Using a DVD drive 2 3 Pull the tray until it is fully open remove the disc and place it in its protective cover
77. ction you d like to move the cursor hS To move the cursor to the top of the page push your finger forward on the TouchPad Getting Started bb Using the computer for the first time To move the cursor to the bottom of the page drag your finger toward yourself To move the cursor to the right side of the page slide your finger across the TouchPad from left to right To move it to the left side slide your finger from right to left NOTE Because the TouchPad is much smaller than the display screen moving your cursor across the screen often means having to move your finger several times across the TouchPad in the preferred direction Once you ve positioned your cursor you can double tap the TouchPad or click the buttons to open a program or file or to get information about an icon Primary and secondary control buttons When you want to click or choose an item use the TouchPad to move the pointer cursor to the item Once the pointer cursor is positioned you can double tap the TouchPad or click the buttons to open a program or file or to get information about an icon The control buttons are adjacent to the TouchPad and are used like the buttons on a mouse The primary control button is the left one and corresponds to the left mouse button To double tap press the primary button twice in rapid succession The function of the secondary button depends on the program you are using It usual
78. d The Fn F1 key combination turns off the display and activates instant security Type either a user or supervisor password and press Enter If you set a blank screen saver pressing the Fn F1 key combination to activate instant security will cause the screen to go blank Moving the pointing device or pressing a key turns the screen back on An Unlock Computer window appears prompting you for a password After typing in the password press Enter NOTE To activate the password feature you must first enable it by using Toshiba Hardware Setup Refer to Toshiba Hardware Setup on page 160 To activate the password feature 1 2 3 Click Start Control Panel Click Appearances and Themes Click one of the following Choose a screen saver in the Pick a task section Display in the or pick a Control Panel icon section The Display Properties window appears If you clicked Choose a screen saver the Screen Saver tab has already been selected If it isn t selected click the Screen Saver tab Click the On resume password protected check box 212 6 Click OK Power usage mode Power usage mode F2 Fn This hot key displays the power usage pop up win dow and cycles through the battery save modes Tag Long Life Sample power usage modes The properties of each mode are set in the Toshiba Power Management utility For more information see Power Management on page
79. d Special programs called Web browsers are specifically designed to work with HTTP They make it easier to connect to a particular network address and send and receive information Learning the Basics 83 An overview of using the Internet Internet Service Providers To connect a computer directly to the Internet many people and businesses use an Internet Service Provider ISP An ISP is a company that has the equipment and the telecommunication lines necessary to maintain an Internet connection You can connect to the Internet by using a telephone and modem or through other higher speed communication methods such as Digital Subscriber Lines DSL cable and satellite links Connecting to the Internet To connect to the Internet you need A modem and telephone line or a LAN connection A Web browser An Internet Service Provider ISP account The Microsoft Web browser Internet Explorer is automatically configured on your system so that when you first start it it guides you through signing up for a new ISP account or assists you in setting up your computer to work with your existing ISP Once you have established an ISP account you can connect to the Internet 1 Connect your computer s modem to a telephone line For more information on connecting to a modem see Connecting the modem on page 49 2 Start your Web browser Have your modem dial the ISP s telephone number and establish a connection
80. d disk drive master password read the warning and click OK To quit without setting a password click Cancel To set a hard disk drive master password click Register Update then Update A master password warning will appear Read the warning and click Yes to continue setting the password or No to cancel Keeping Your Files Safe 1 11 Setting a hard disk drive master password 6 7 Type a password of up to 10 characters under New Password and type it again to confirm Click OK CAUTION Make sure you choose a hard disk drive master password you can remember easily If you set a hard disk drive user password and later forget the password or lose your password diskette you will need to enter the hard disk drive master password in order to access your hard disk A confirmation screen appears to verify you want to register the password Click Yes If you want to store the password on a removable media click Yes otherwise click No to continue without storing the password on a removable media If you are storing the password on a removable media insert the media of you choice and type the drive and file name you want to save it as or click Browse to search for the drive Press OK to continue HDDPWM saves the password on the media as a text file If you forget your password you can open the text file on another computer and find out what the password is HDDPWM displays a warning screen notifying you t
81. d to enter the hard disk drive user password in order to access your hard disk Keeping Your Files Safe 1 13 Setting a hard disk drive master password A confirmation screen appears to verify you want to register the password 9 Click Yes 10 If you want to store the password on a removable media click Yes otherwise click No to continue without storing the password on a removable media 11 Ifyou are storing the password on a removable media insert the media of you choice and type the drive and file name you want to save it as or click Browse to search for the drive 12 Press OK to continue HDDPW saves the password on the media as a text file If you forget your password you can open the text file on another computer and find out what the password is HDDPW displays a warning screen notifying you that the computer must be turned off and restarted in order for the change to take place 13 To finish setting the hard disk drive user password click OK The hard disk drive user password will be registered the next time you restart your computer 14 When you need to use the hard disk drive user password type the password when prompted and press the tab key Deleting the hard disk drive user password HINT You must delete the hard disk drive user password before you can delete the hard disk drive master password To delete a hard disk drive user password 1 1 Click Start then click Run 1 4 Kee
82. e 54 Keyboard The 84 key keyboard provides all the functionality of a full size keyboard For more information see Using the keyboard on page 66 NOTE For environments that do not permit wireless use or instruct you to turn off all radio devices for example aboard commercial aircraft you should turn the wireless antenna switch off Keyboard indicator panel These lights provide information about various keyboard functions See Keyboard indicator panel on page 35 for details Windows button Performs the same function as pressing Ctrl Alt and Del simultaneously once For more information see Display system buttons on page 36 Down button Programmable button For more information see Display system buttons on page 36 Enter menu button Programmable button For more information see Display system buttons on page 36 Up button Programmable button For more information see Display system buttons on page 36 Finding Your Way Around 33 Finding where everything is located Screen and tablet The computer s screen is a liquid crystal display LCD that provides clear sharp images Note that the screen rotates clockwise and folds down to be used as a writing tablet See Using tablet mode on page 106 for details Underside Expansion memory cover fo ae g 0000000000000 00000000000000 Batter
83. e Switch 130 network port 28 numeric overlay 35 numlock light 35 0 on off light 34 optional additional equipment battery charger 89 91 carrying case 101 Noteworthy computer lock cable 63 overlay cursor control 35 71 numeric 35 pP password creating 167 disabling 167 hard disk drive 167 169 instant 168 power on 166 types 166 user level 166 168 240 e passwords 166 PC Card checklist 195 CIS Card Information Structure 194 computer stops working 196 errors 196 hot swapping 114 hot swapping fails 196 inserting 113 modem default 126 not recognized 196 problem solving 194 195 removing 113 slot 30 112 PC Card slot 29 112 playing audio 80 Plug and Play 183 port COM 126 infrared 27 modem 30 network 28 RGB monitor 28 PORT Noteworthy computer lock cable 29 power cable connectors 218 computer will not start 177 energy saving features 86 preset usage modes 93 problem solving 186 power button 31 54 106 Power Management 157 running on batteries 158 power off guidelines 61 power usage modes changing 94 customizing 159 preset 93 powering down the computer 134 options 134 precautions 52 primary control button 55 printer connecting 48 problem solving 197 setting up 60 printing a file 73 problem solving AC power 186 accessing disk drives 178 battery charge doesn t last 187 battery not charging 187 can t insert diskette in drive 192 can t read a diskette 192 changing display properties
84. e on the Web or any other Internet facility Generically it is known as the World Wide Web site address Having a list of favorite URLs handy saves time Using it bypasses the need for you to launch your browser first To customize your taskbar settings point to an empty space in the taskbar and click the secondary button Then click Properties 120 Enhancing Productivity Personalizing your desktop Bringing the world to your desktop With the Windows XP operating system you can set up your desktop with complete World Wide Web integration at a single click Turning on the Web content interface The first step to bring active content to your desktop is to turn on the Web content interface 1 NN on A U Point to an empty space on the desktop and click the secondary button Click Properties The Display Properties window appears Click the Desktop tab Click the Customize Desktop button Click the Web tab Follow the instructions to set up your desktop Adding components to the Web content interface 1 Point to an empty space on the desktop and click the secondary button Click on Properties The Display Properties window appear Click the Desktop tab Click the Customize Desktop button Click the Web tab The operating system displays a list of items to add to the desktop To view additional components click New The New Desktop Item dialog box appears Enhancing Productivity 1 21 Pe
85. e using For more information see your program documentation Function keys The function keys not to be confused with the Fn key are the 12 keys at the top of the keyboard Function keys F1 through F12 are called function keys because they execute programmed functions when pressed Used in combination with the Fn key function keys marked with icons execute specific functions on the computer For more information see Fn esse on page 149 or Hot Keys on page 210 Learning the Basics 69 Using the keyboard Hot keys When used in combination with the Fn key function keys marked with icons run programmed functions specific to your computer For more information see Hot Keys on page 210 Windows special keys Start key Application key Windows special keys Your computer s keyboard has two keys located at the top right of the keyboard that have special functions in the operating system Start key Opens the Start menu Application key Has the same function as the secondary mouse or TouchPad button Overlay keys The keys with numbers and symbols on the front of them form the numeric and cursor overlay This overlay lets you enter numeric data or control the cursor as you would using the 10 key keypad on a desktop computer s keyboard 10 Learning the Basics Using the keyboard
86. e volume of the system speakers Battery lock Holds the battery securely in place Battery lock indicator lIndicator glows red when battery is locked Display release button Pressing this button opens the computer display panel System indicator panel The system indicator panel is made up of several status lights that provide information about various system functions See System indicator panel on page 34 for details Infrared port IR Allows cable free communication with another device such as a computer or printer that has a compatible infrared port Battery release Releases the battery 2 8 Finding Your Way Around Finding where everything is located Back RGB monitor coodoo o0000 oo0000 Cooling vent USB 2 0 ports Network port Cooling vent Provides ventilation to keep the computer s processor from overheating The vent lets the processor continue performing at its maximum speed CAUTION To prevent possible overheating of the computer s processor make sure you dont block the cooling vent ae O DC IN jack Enables you to plug in the AC adapter C RGB monitor port Lets you connect an external monitor For more information see Using external display devices on page 104 USB 2 0 ports The two USB Universal Serial Bus ports A provide a
87. ection you may be unable to stop or eject your card If this occurs try restarting the computer Using Standby or Hibernate while using the SD card It is recommended that you do not select Standby or Hibernation mode while an SD card is in use If you do so your system may not enter Standby or Hibernation mode some tasks may become unresponsive and the operating system may not shut down properly If this occurs reset your computer by holding down the power button for four seconds Removing an SD card Before removing an SD card from the SD slot close any applications which utilize the SD card Use the eject utility to ensure that the card is ready to be removed Once the activity indicator light has turned off you may safely remove the card Expansion Options 1 1 T Using an SD card To remove an SD card press the card inward to release it The card pops out slightly The device name will disappear only after you have physically removed the card from your computer CAUTION Removing the SD card without the eject utility may result in lost data on your SD card Chapter 6 Enhancing Productivity In this chapter you will explore other features of your notebook computer Windows XP special features The Windows XP Professional operating system offers you several new features and enhancements including New system file protection A system restore function allowing you to rollback the system
88. ed This chapter provides tips for working comfortably summarizes how to connect components and explains what to do the first time you use your notebook computer Selecting a place to work Your computer is portable and designed to be used in a variety of circumstances and locations Creating a computer friendly environment Place the computer on a flat surface that is large enough for the computer and any other items you are using such as a printer Leave enough space around the computer and other equipment to provide adequate ventilation Otherwise they may overheat To keep your computer in prime operating condition protect your work area from Dust moisture and direct sunlight 38 Getting Started 39 Selecting a place to work e Liquids and corrosive chemicals eSa hS CAUTION If you spill liquid into the computer turn it off unplug it from the AC power source and let it dry out completely before turning it on again If the computer does not operate correctly after you turn it back on contact your Toshiba service representative or your network administrator Equipment that generates a strong electromagnetic field such as stereo speakers other than speakers that are connected to the computer or speakerphones Rapid changes in temperature or humidity and sources of temperature change such as air conditioner vents or heaters Extreme heat cold or humidity Keepi
89. en e erain aE EEEE ERE 42 Setting up your Computer ceee 43 Removing a memory module 47 Connecting an external USB mouse 48 Connecting an external USB keyboard 48 Connecting a printer l c 48 Connecting the Modem ccc 49 Connecting to a phone line oe 49 Connecting to a network nees 50 Connecting to a power SOUICE oee 51 Connecting other external devices 000 53 Using the computer for the first time 08 53 Opening the display panel eee 53 Turning ON the POWEDS eccere 54 Using the TouchPad en 54 Setting up your SO WaAre een 57 Registering your computer with Toshiba 57 Using your computer in tablet mode 58 Setting UP a printer cenn 60 Customizing your computer s settings 61 Powering off the computer cece eeeeeeeeneees 61 Closing the display panel eee 62 Different ways to turn the computer on and off 62 Caring for your COMPUTEL eee eceeeeeeeeeeeerees 62 Cleaning the computer cees 63 Moving the COMpUter enas 63 Using a computer lOCK accenn 63 Contents d D Chapter 3 Learning the BaS CS n 65 COMPUTING TIPS woo eee ceccceeesessseseseeeserneeeeees 65 Using the keyboard ccecce 66 Character kKeyS sccicicctvssaisincsissbeinestrtacarocuacnencien 67 Making your keyboard emulate a full size KOVDOATO Peete me nen eo ee ee Orne 6 Ctrl Fn and Alt Keys nccc 68 FUNG TOT OY Seca egeeten decane ste encnzses ni
90. er cables diskettes etc See your dealer for more information NOTE When traveling by air you may be required to put your notebook through airport security The X ray equipment used will not harm your computer Chapter 5 Expansion Options Your computer is designed to work in your office as well as on the road This chapter explains how to set up several optional external devices so that your notebook can provide all the convenience of a traditional desktop computer To order additional devices and accessories see the accessories information provided with your computer or visit toshibaaccessories com Using your computer at the office By connecting an external full size keyboard an external monitor a mouse and a printer you can work with your computer as if it were a standard office model You can connect a monitor and USB compatible devices such as the keyboard mouse and printer directly to the computer For information on connecting a mouse and a printer see the Getting Started on page 38 If you want to connect your computer to the office network you can use the LAN port or your optional wireless LAN Wi Fi capability 102 Expansion Options 1 03 Using the optional external USB diskette drive Using the optional external USB diskette drive The optional external USB diskette drive allows you to use diskettes and is useful for installing software on the hard disk exchanging info
91. er using the Standby command as follows 1 Click Start Turn off computer The Turn off computer window appears Turn off computer Stand By Turn Off Restart Cancel Sample Turn off computer window with Stand By option Enhancing Productivity 1 A5 Using Standby 2 Click Stand By The computer saves the state of all open programs and files to memory turns off the display and goes into a low power mode The on off light blinks amber indicating the machine is in Standby mode If you are connected to a Windows network server domain server power down the computer using the Standby command as follows 1 Click the Start button then select Shut down The Shut Down window appears 2 Select Stand by from the drop down list of options 3 Click OK The computer saves the state of all open programs and files to memory turns off the display and goes into a low power mode The on off light blinks amber to indicate the machine is in Standby mode Going i NOTE If you power down using the Standby command and the battery discharges fully your information will be lost Be sure to save your work often nto Standby mode more quickly You can also put the computer into Standby mode in three ways By pressing the hot key combination Fn F3 By pressing the power button By closing the display panel 1 46 Enhancing Productivity Using Standby To put the computer into Standby mode
92. ernet Service Provider ISP or online service if you plan to use the Internet Determining the COM port Your modem is connected to one of the computer s COM communications ports The default setting for the modem is COM3 The following procedure is intended to support you if you need to either upgrade your modem or reset the port to the default settings If you re having trouble connecting through the modem you may need to determine the current COM port name and possibly change it To find out which port your modem is connected to in the operating system 1 Click Start click Control Panel then Printers and Other Hardware The Control Panel opens 2 Click Phone and Modem options The Phone and Modem options window appears 3 Click the Modems tab A location box appears 4 Make a note of the COM port number shown in the Attached to field 5 To verify that the modem is set up properly double click the COM port to which your modem is connected The Modem AMR Properties box appears In the device status area the computer should indicate whether the modem is working properly 6 If the modem isn t working properly click Troubleshooting and follow the instructions Enhancing Productivity 1 2 Setting up for communications 7 Click OK to close the Properties box then the Phone and Modem options box 8 Close the Control Panel For more information regarding your system s V 92 modem visit the Toshiba
93. es oh neste 68 Windows special keys s s s 69 Overlay Keys cos saceacenccestasuansadenestesesanastorausacnenes 69 Starting a program 71 SAVING YOU WOKK cece cece eceseeeesseeseseesereeeennens 72 Printing VOUS WOFKK cc ccccccesseeeeeseesseeeeeseesseeeeeens 13 USING diskettes ceren 13 Inserting and removing diskettes 00 13 Copying documents to a diskette 14 Taking care of diskettes 19 Backing UP YOUP WOFK 0 cceececeeeseeeseesseeeeeeesseeees 19 Restoring your WOMK uo cceecceeseseeeceesseeeeeeeessteeeeens 16 Using a DVD dive ec ccceceeseseesesteeereeneeen 76 Inserting discs CD or DVD uu eee 77 Removing discs CD or DVD cece 18 Caring for CDs and DVDS 79 Playing audio ou ceececescecceseeeesesseeeeeseseeeseeseeeess 80 setting up for COMMUNICATIONS eee 81 Connecting your computer to a network 81 An overview of using the Internet 62 MR WOO UIVCN aS 82 The World Wide Web cee ceeeceesseeeeeeeees 82 Internet Service Providers 83 Connecting to the Internet e 83 Surfing the Internet 84 Internet features 84 1 O Contents Uploading and downloading files from the Internet i r 89 Toshiba s online resources reren 8D Chapter 4 Mobile Computing 86 Toshiba s energy Saver design csser 86 Running the computer on battery power 86 Maximizing battery life O Using additional batteries ccce 88 Battery safety precautions
94. evice To assign a key to open a program or document 1 2 Start Fn esse Perform one of the following Using the keyboard press and hold the Fn key then press the desired assignment key Using the pointing device move the cursor over the desired key and press the secondary button The Assignment Type dialog box appears HINT If you are making a direct key assignment complete step 3 If you are making a popup assignment complete step 4 To make a direct key assignment select Direct to display the Add Edit Command dialog box then complete these Steps Enter the Description Command Line and Working Directory for the new Fn esse key assignment or click the Browse button to specify this information Click OK To make a popup assignment select Popup to display the Application Explorer dialog box then complete these Steps Select the desired folder The left side of the Application Explorer window displays the folders in the Programs menu The right side lists the programs and documents in the folder These are the items that appear in the popup list Ss To create a popup list with items from various folders or to pick only a few items from a folder create a new folder containing only the desired programs and documents If you are unsure how to Toshiba Utilities 1 53 Hotkey utility do this refer to your operating system documentation Click OK to associate the folder with the
95. evices such as CD and DVD drives By adjusting the controls on your operating system s Windows Media Player you can control the playing of those files To access the Windows Media Player click Start then click Windows Media Player Windows Media Player DER File View Play Tools Help 7 Total Time 0 01 Rewind Fast forward Play Volume Stop control Previous track Next track Mute Sample Windows Media Player screen With your pointing device use the Windows Media Player screen as you would an audio control panel Learning the Basics ST Setting up for communications Setting up for communications To connect to the Internet use an online service or communicate across the telephone lines with another computer you need A modem supplied with your computer A telephone line A browser or communications program An Internet Service Provider ISP or an online service if you plan to use the Internet Before you can use the modem you must connect it to a standard voice grade telephone line See Connecting the modem on page 49 for details Connecting your computer to a network To access a network At the office connect the computer to a Local Area Network LAN For specific information about connecting to the LAN consult your network administrator Use your computer s optional Wi Fi capability to connect to a wireless LAN While you are at home or
96. g Standby Hibernate For more information see Power Management on page 157 Different ways to turn the computer on and off Pressing the power button isn t the only way to turn on and off the computer Alternatives include o Using Hot Key combinations Opening and closing the display panel For more information see Using Hibernation on page 140 and Using Standby on page 144 Caring for your computer This section gives tips on cleaning and moving your computer For information about taking care of your computer s battery see Battery safety precautions on page 88 Getting Started 63 Caring for your computer Cleaning the computer CAUTION Keep liquid including cleaning fluid out of the computers keyboard speaker grille and other openings Never spray cleaner directly onto the computer Never use harsh or caustic chemical products to clean the computer To keep your computer clean gently wipe the display panel and exterior case with a lightly dampened cloth Ask your network administrator for suggestions for appropriate cleaning products Moving the computer Before moving your computer even across the room make sure all disk activity has ended the drive in use light stops glowing and all external peripheral cables are disconnected Using a computer lock You may want to secure your computer to a heavy object such as your desk The easiest way to do this is to
97. g O5 Using battery alarms You may choose a power saving management strategy to best suit your computing needs If you are running on batteries and the programs that you are using do not require a lot of system resources you may experience longer work sessions by enabling the Normal setting Any options that you change become the active settings when you exit the program You do not have to restart your system before they become active settings Using a hot key to select the power usage mode 1 Press Fn and F2 simultaneously to display the power usage pop up window 2 While continuing to press Fn press F2 until you select the desired power usage mode 3 Release the Fn key The computer is now in the selected mode Using battery alarms You can configure the computer to warn you when the battery is running low Setting battery alarms You can set two alarms Each alarm can be set to alert you when a specified percentage of remaining battery power has been reached You can set how the warning occurs sound an alarm display a message both or none You can also set the computer to enter Standby mode or Hibernation mode or to completely power down when the alarm goes off To set an alarm or alarms 1 Click Start Control Panel 2 Click Performance and Maintenance 3 Click the Toshiba Power Saver icon The TOSHIBA Power Saver Properties window appears 96 Mobile Computing Turning off the display automatically
98. gistered trademarks of their respective companies Computer Disposal Information This product contains mercury Disposal of this material may be regulated due to environmental considerations For disposal reuse or recycling information please contact your local government or the Electronic Industries Alliance at www eiae org Contents WOE OCIIGTIOW sinapan Enne E 22 This guide sacsce nas sceatedasticmeensahoctivesssancieatentitaateaeccestes 22 Safety ICONS occ ccccssecccsesesseessseesesessseeeeeneeeees 23 Other iCONS used 24 Other documentation 0 cc eeceeeeeeeeeeen 24 Service OPTIONS wo ecccseseseeesseeeseseeeseeeeeenens 25 Chapter 1 Finding Your Way Around seee 26 Making sure you have everything cceee 26 Finding where everything is located 08 26 Front with the display panel closed 21 PG OANE 20 PONLO IU eee a E 29 Left side a re eee 29 Front with the display panel open 6 30 Underside coxa tarsacisenieatasseanautanterextanee naideetssaen 33 Indicator panels c ccc ccceeeesessseeeeeeeessseeeeneeess 34 System indicator panel ccn 34 Keyboard indicator panel 39 Display system DUttONS ec ceecceeseeeeeeeeereees 36 1 4 Contents Chapter 2 Getting Started wo cesses 38 selecting a place tO WOFK ccce 38 Creating a computer friendly environment 38 Keeping yourself comfortable c ee 39 FCC AUD ONG siren
99. gs on your Computer IF you prefer you can switch to Advanced Mode to change the settings used for backup or restore This option is recommended for advanced users only To continue click Next Sample Backup or Restore Wizard window 3 Follow the on screen instructions Restoring your work You can also use the Backup or Restore Wizard to restore information from your backup media to your hard disk we TECHNICAL NOTE When restoring files the backup program P prompts you if you try to overwrite a file that already exists on the f hard disk Make sure the backup version is the one you want before overwriting the existing file wl Using a DVD drive Your computer may come with an external DVD ROM drive that can read CDs and DVDs Learning the Basics T Using a DVD drive To attach this drive to your computer follow the instructions in Using an optional external DVD ROM drive on page 104 Inserting discs CD or DVD To insert a disc into the drive 1 Make sure the computer is turned on 2 Make sure the drive in use indicator light is off 3 Press the drive s eject button The disc tray slides partially out of the drive about 1 inch HINT The drive wont open if the computers power is off 4 Grasp the tray and pull it fully open Drive tray fully extended 5 Hold the disc by its edges and check that it is free of dust If the disc is dusty clean it as des
100. hat the computer must be turned off and restarted in order for the change to take place To finish setting the hard disk drive master password click OK NOTE Once it is set the master password can be changed but not deleted 1 2 Keeping Your Files Safe Setting a hard disk drive master password The hard disk drive master password will be registered the next time you restart your computer When you need to use the hard disk drive master password type the password when prompted and press the tab key Setting a hard disk drive user password To set a hard disk drive user password 1 2 Click Start then click Run In the Run box type c Program Files toshiba Windows Utilities HDDPW HDDPW and press Enter The Hard Disk Drive Password program HDDPW displays a warning screen To set a hard disk drive user password read the warning and click OK To quit without setting a password click Cancel To set a hard disk drive user password click Register Update then Update A user password warning will appear Read the warning and click Yes to continue setting the password or No to cancel Type a password of up to 10 characters under New Password and type it again to confirm Click OK CAUTION Make sure you choose a hard disk drive user password you can remember easily If you set a hard disk drive user password and later forget the password or lose your password diskette you will nee
101. he Toshiba tablet pen 111 Returning the computer to its original CONFIQUIATION ccccccccceessseeeeeseesseeeeeens 112 Using PC Cards 112 Inserting a PC Card ns 113 Removing a PC Card cenn 113 Hot swapping PC Cards scree 114 Using an SD Card ceren 115 Installing SD Card rivers cesses sees 115 Installing the SD card in the SD slot 115 Formatting an SD Card cenn 116 Using Standby or Hibernate while using the SD 672 0 E nen en E ee 116 1 8 Contents Chapter 6 Enhancing Productivity 118 Windows XP special features 0 0cce eee 118 Personalizing your desktop ccecce 119 Customizing the taskbar nn 119 Bringing the world to your desktop 120 Changing desktop and browsing style 121 Personalizing individual windows 6 122 Customizing window toolbars c c 123 Displaying information about each folder 124 setting up for CommuNICatIONS eee 125 Determining the COM port ee 126 Using the Ethernet LAN Port 127 Accessing a LAN ccccccccccceccn 127 Exchanging data with another computer 128 Transferring application fileS ee 128 setting up a direct cable connection 129 setting up a wireless connection 0 129 Accessing the wireless modules using your SAVES 2 eee ee oe een 129 Using Bluetooth ccnn 131 Using audio features eccnrenen 132 Using external speakers or headphone
102. he label and try inserting the diskette again The computer displays the Non system disk or disk error message If you are starting the computer from a diskette the diskette in the drive does not have the files necessary to start the computer Replace it with a bootable diskette The drive cannot read a diskette Try another diskette If you can access the second diskette the first diskette not the drive is probably causing the problem Run Error checking on the faulty diskette for instructions see Disk drive problems on page 190 Problems with the DVD ROM drive You cannot access a disc in the drive Make sure the tray which holds the CD ROM or DVD ROM is closed properly Press gently until it clicks into place lf Something Goes Wrong 1 93 Resolving a hardware conflict Open the tray and remove the disc Make sure the tray is clean Any dirt or foreign object can interfere with the laser beam Examine the disc to see 1f it is dirty If necessary wipe it with a clean cloth dipped in water or a neutral cleaner Replace the disc in the tray Make sure that the disc is lying flat label side uppermost Close the tray carefully making sure it has shut completely You press the DVD ROM eject button but the DVD ROM tray doesn t slide out Make sure the computer is connected to a power source and turned on The DVD ROM drive eject mechanism requires power to operate If you need to remove a disc and cann
103. ht wireless 35 indicator panel system 32 infrared port 27 transferring files 128 instant password 168 hot key 168 Internet 82 bookmarked site not found 180 chat rooms 84 connecting to 83 news groups 84 overview 82 slow connection 180 URL address not found 180 Internet Service Provider ISP 83 85 IRQ Interrupt Request 182 J jack headphone 27 microphone 27 K keyboard 84 key 32 caps lock key 67 character keys 67 connecting USB compatible 48 curser control overlay 71 Fn esse 150 full size 32 function keys 68 indicator panel 32 35 not working 177 overlays 69 troubleshooting 188 Windows special keys 69 L latch display 27 LCD display 33 LCD panel closing 62 screen saver 96 turn off automatically 96 light battery 34 lighting 41 lights AC power 34 battery 34 hard disk drive 35 numlock 35 on off 34 system 32 wireless indicator 35 memory problem solving 185 removing expansion slot cover 45 memory module inserting 46 removing 47 microphone jack 27 using 133 modem connecting to telephone line 49 determining COM port 126 problem solving 198 resetting port to default settings 126 upgrading 126 modem port 30 modes Hibernation 136 Standby 136 mx 239 module Bluetooth 130 Wi Fi 130 monitor adjusting display 105 connecting 104 not working 189 monitor port 28 mouse connecting USB compatible 48 moving the computer 63 network accessing 81 127 Dial Up Networking Wizard 81 Network Devic
104. ical files to diskette on a daily basis If you have installed your own programs you should back up these programs as well as your data files If something goes wrong that requires you to reformat your hard disk and start lf Something Goes Wrong 203 If you need further assistance again reloading all your programs and data files from a backup source will save time Read the user s guides It s very difficult to provide a fail safe set of steps you can follow every time you experience a problem with the computer Your ability to solve problems will improve as you learn about how the computer and its software work together Get familiar with all the user s guides provided with your computer as well as the manuals that come with the programs and devices you purchase Your local computer store or book store sells a variety of self help books you can use to supplement the information in the manuals if you need further assistance If you have followed the recommendations in this chapter and are still having problems you may need additional technical assistance This section contains the steps to take to ask for help Before you call Since some problems may be related to the operating system or the program you are using it is important to investigate other sources of assistance first Before contacting Toshiba Review the troubleshooting information in your operating system documentation Ifthe problem o
105. icates the drive is being accessed don t turn off the computer Powering off the computer while it is reading from or writing to a disk may damage the disk the drive or both Keep the computer and diskettes away from objects that generate strong magnetic fields such as large stereo speakers Information on diskettes is stored magnetically Getting a magnet too close to a diskette can erase important files Getting Started 43 Setting up your computer Scan all new files for viruses This precaution is especially important for files you receive via diskette or email or download from the Internet Setting up your computer Your computer contains a rechargeable battery that needs to be charged before you can use it To use external power or to charge the battery you must attach the AC adapter See Connecting to an AC outlet on page 51 To register your computer online or to sign up for an Internet account you must connect the built in modem to a telephone line See Connecting the modem on page 49 Before starting to use your computer you may also want to Add more memory Connect a mouse see Connecting an external USB mouse on page 48 Connect a full size keyboard see Connecting an external USB keyboard on page 48 Connect an external monitor see Connecting other external devices on page 53 and Using external display devices on page 104 Connect a local pr
106. ick Start then point to All Programs 2 Point tc TOSHIBA Console then click TOSHIBA Console selection The TOSHIBA Console window appears 3 Click the Table and Pen Settings icon The Tablet and Pen Settings screen appears 4 Click the Calibrate button on the Settings tab the default tab displayed and follow the on screen instructions 5 Click OK Expansion Options 1 1 1 Using tablet mode To learn how to manually change the layout of the screen from portrait to landscape see The Toshiba Rotation Utility on page 162 NOTE Included with your computer is Sensivas Symbol Commander allowing you to quickly execute commands for example changing the layout of the screen from landscape to portrait by drawing a pre assigned symbol on the screen For details on using Symbol Commander refer to the online help with the application original configuration with the screen open and facing the yw NOIE You can also use tablet mode when the computer is in its E keyboard Using the Toshiba tablet pen Use the Toshiba tablet pen as you would a mouse or other pointing device For example you can execute mouse type commands in the same manner you normally would To move the pointing icon or cursor on the tablet simply drag the Toshiba tablet pen across the tablet To click a button gently press the Toshiba tablet pen on it one click To launch an application from the desk
107. ick access to computer functions and allows you to customize a range of computer settings To access this utility 1 Click Start then point to All Programs 2 Point tt TOSHIBA Console then click TOSHIBA Console selection The TOSHIBA Console window appears Toshiba Utilities 1 DD TOSHIBA Console Customizing Your db D g Computer Power Mouse Hotkey Management Assignment ir a K ss TOSHIBA Tablet and AutoRotation Hardwa Pen Settings Settings Sample TOSHIBA Console window The TOSHIBA Console offers three categories of options Customize Your Computer Network gt Security Customize Your Computer The options available in this category are Power Management Mouse Hotkey assignment for detailed information see Fn esse on page 149 Toshiba Hardware Setup Tablet and Pen Settings Auto Rotation Settings 1 56 Toshiba Utilities TOSHIBA Console Network The options in this category are the IR Utility Bluetooth settings Start Bluetooth and Network Device Switch Security The options available in this category are Supervisor password User password TOSHIBA Controls The TOHSIBA Controls allows you to select either the default Internet browser default e mail program TOSHIBA Console or custom Application to launch when you click the InTouch button in the Tablet menu For information on how to display the Tablet menu and InTouch button see Dis
108. inter see Connecting a printer on page 48 Install PC Cards see Using PC Cards on page 112 4 4 Getting Started Setting up your computer Installing a memory module Depending on your system s configuration the memory slot may be occupied You need a standard Phillips no 1 screwdriver to install a memory module CAUTION To avoid damaging the computers screws use a standard Phillips no 1 screwdriver that is in good condition e CAUTION Do not install or remove a memory module while the DVD ROM drive power is on e CAUTION Installing a memory module with the computers power on may damage the computer the module or both a If the computer is on begin at step 1 otherwise skip to step 3 1 If the computer is on click Start Turn Off Computer The Turn off computer window appears 2 Click Turn Off The operating system turns off the computer 3 Unplug and remove any cables connected to the computer 4 Remove the battery Close the display panel and turn the computer upside down to locate the expansion memory cover to the memory slot Getting Started A5 Setting up your computer Expansion memory cover Base of the computer 6 Using a standard Phillips no 1 screwdriver unscrew the screw that secures the memory slot cover then remove the memory slot cover Removing the memory slot cover screws 7 Place the screw and
109. ium Boulevard 41 2909 LK Capelle a d IJssel The Netherlands Morocco C B I 22 Rue de B thune Casablanca Morocco lf Something Goes Wrong Toshiba s worldwide offices 20 Ireland Toshiba Information Systems U K Ltd Toshiba Court Weybridge Business Park Addlestone Road Weybridge KT15 2UL United Kingdom Japan Toshiba Corporation PCO IO 1 1 Shibaura 1 Chome Minato Ku Tokyo 105 8001 Japan Mexico and all of Latin America Toshiba de M xico S A Sierra Candela No 111 6to Piso Col Lomas de Chapultepec CP 11000 Mexico DF 800 457 7777 within the US 949 859 4276 outside of the US this call may incur long distance charges The Netherlands Toshiba Information Systems Benelux B V Rivium Boulevard 41 2909 LK Capelle a d IJssel The Netherlands 208 lf Something Goes Wrong Toshiba s worldwide offices Norway Papua New Guinea Scribona Norge A S Fujitsu PNG Pty Ltd Toshiba PC Service P O Box 4952 Boroko Stalfjaera 20 NCD Papua P O Box 51 New Guinea Kalbakken 0901 OSLO 9 Norway Poland Portugal TECHMEX S A Quinta Grande Assist ncia ul Partyzantow 71 T cnica Informatica Lda 43 316 Bielsko Biala Av Moinhos no 15A 01 059 Warszawa Ur Quinta Grande Poland 2720 Alfragide Portugal Singapore Slovakia Toshiba Singapore Pte Ltd HTC as 438B Alexandra Rd 06 01 Dobrovicova 8 Alexandra Technopark 81109 Bratislava Singapore 119968 Slovakia Slovenia Spai
110. ive flap inside the drive s insertion slot automatically retracts when you insert a diskette The diskette in use light glows when the computer is accessing a diskette 2 Push the diskette eject button to remove a diskette from the drive T 4 Learning the Basics Using diskettes Copying documents to a diskette Diskettes provide an easy means of transferring files from one computer to another Copying a file to a diskette also gives you a backup copy in case something happens to the original on your hard disk This section describes how to use the My Computer window to copy a file from the hard disk to a diskette To copy files to a diskette 1 Connect the optional external USB diskette drive to the computer 2 Insert a diskette into the drive 3 Double click the My Computer icon The operating system opens the My Computer window 4 Double click the drive that contains the file you want to copy The operating system displays the contents of the drive 5 Double click the folder that contains the file then click the file you want to copy HINT Use the Ctrl or Shift key to select more than one file On the menu bar click File then click Send To Click the icon for 32 Floppy A The operating system copies the file s HINT You can also copy a file to diskette by clicking the file or files you want to copy with the secondary button then pointing to Send To and clicking 3 Floppy A Lea
111. l 1 Press the display release button 2 Lift the display panel CAUTION To avoid damaging the display panel do not force it beyond the point where it moves easily and never lift the computer by the display panel To learn how to rotate the display panel or use your computer in tablet mode see Using your computer in tablet mode on page 58 04 Getting Started Using the computer for the first time Turning on the power To turn on the computer 1 Make sure any external devices such as the AC adapter if you plan to use AC power rather than battery power are properly connected and ready If an optional external diskette drive is connected to your computer check that the drive is empty Press and hold in the power button until the on off light on the system indicator panel glows green about one second CAUTION Never turn off the computer while any of the drives is in use Doing so may damage the media in use and result in loss of data The preinstalled operating system will load automatically CAUTION When you turn on the computer for the first time don t turn off the power again until the operating system has loaded completely Using the TouchPad The TouchPad the small smooth square cutout located in front of the keyboard is sensitive to touch and enables you to move the cursor with the stroke of a finger Simply move your finger on the TouchPad in the dire
112. lacing your computer in front of a bright light that could shine directly in your eyes If possible use soft indirect lighting in your computer work area Arms and wrists Avoid bending arching or twisting your wrists Keep them in a relaxed neutral position while typing Exercise your hands wrists and arms to improve circulation 42 Getting Started Precautions Work habits The key to avoiding discomfort or injury from strain is to vary your activities If possible schedule a variety of tasks into your working day Finding ways to break up the routine can reduce stress and improve your efficiency gt h S Take frequent breaks to change position stretch your muscles and relieve your eyes A break of two or three minutes every half hour is more effective than a long break after several hours Avoid performing repetitive activities for long periods Intersperse such activities with other tasks Focusing your eyes on your computer screen for long periods can cause eyestrain Look away from the computer frequently and focus your eyes on a distant object for at least thirty seconds Precautions gt Sd gt h S Avoid spilling liquids on the computer s keyboard If you do spill a liquid that gets into the keyboard turn off the computer immediately Leave the computer turned off overnight to give it time to dry out before you use it again If a drive in use light ind
113. latile we mean that information in ROM remains whether or not the computer is receiving power This type of memory is used to store your computer s BIOS which is essential instructions the computer reads when you start it up See also BIOS memory Compare RAM select To highlight or otherwise specify text data or graphics with the intent to perform some operation on it w 233 serial Processes that occur one at a time In communications it means the transmission of one bit at a time sequentially over a single channel On your computer the serial port provides a serial interface between the computer and an appropriate device Compare parallel shortcut See keyboard shortcut software See program Compare hardware Standby A feature of some Windows operating systems that allows you to turn off the computer without exiting your open applications and to continue from where you left off when you turn the computer on again Suspend A feature of some Windows operating systems that allows you to turn off the computer without exiting your open applications and to continue from where you left off when you turn the computer on again system disk A diskette that contains the operating system files needed to start the computer Any diskette can be formatted as a system disk A system disk is also called a bootable disk or a startup disk Compare non system disk system prompt The symbol
114. lay To change the display properties 1 Point at the desktop and click with the secondary button The Display Properties window appears 2 Click Properties then click the Settings tab Adjust the screen resolution and or color quality 4 Click OK The display mode is set to Simultaneous and the external display device does not work Make sure the external monitor is capable of displaying at resolutions of 800 x 600 or higher Devices that do not support this resolution will only work in External monitor only mode Disk drive problems Problems with the hard disk or with a diskette drive usually show up as an inability to access the disk or as sector errors Sometimes a disk problem may cause one or more files to appear to have garbage in them Typical disk problems are You are having trouble accessing a disk or one or more files appear to be missing Make sure you are identifying the drive by its correct name A or C lf Something Goes Wrong 1 OF Resolving a hardware conflict Error checking Run Error checking which analyzes the directories files and File Allocation Table FAT on the disk and repairs any damage it finds To run Error checking 1 Click Start then click My Computer 2 Right click the drive you want to check The drive s Properties box appears Click the Tools tab Click the Check now button The Check Disk All Apps box appears 5 You can choose one or both options Automatically
115. ly corresponds to the right mouse button Check your program s documentation to find whether it uses the secondary mouse button 56 Getting Started Using the computer for the first time Disabling or enabling the TouchPad The TouchPad is enabled by default To change the current enable disable TouchPad setting 1 Click Start Control Panel The Control Panel window appears Click Printers and Other Hardware Click Mouse Properties The Mouse Properties window appears 4 Click the TouchPAD ON OFF tab The TouchPAD ON OFF tab view window appears Mouse Properties Buttons Pointers Pointer Options Motion Hardware Orientation Tapping Gestures Others m TouchPAD ON OFF TouchP4D ON OFF Current TouchPAD Status Setting Change Enable Ee Sample Mouse Properties window 5 Select Disable or Enable whichever is appropriate 6 Click Apply 7 Click OK Getting Started 5 Using the computer for the first time 8 9 The Mouse Properties window closes Close the Printers and Other Hardware window Close the Control Panel window You can also use a hot key to disable or enable the TouchPad See Disabling or enabling the TouchPad on page 216 Setting up your software The first time you turn on your computer the Setup Wizard guides you through steps to set up your software 1 From the welcome screen click Next to enter the Setup Wizard Confirm acceptance of Microsoft s End User Licen
116. m Contact the manufacturer of the PC Card for information about using the card under the operating system PC Card checklist Make sure the card is inserted properly into the slot Make sure all cables are securely connected Occasionally a defective PC Card slips through quality control If another PCMCIA equipped computer is available try the card in that machine If the card malfunctions again it may be defective Resolving PC Card problems Here are some common problems and their solutions The slot appears to be dead PC Cards that used to work no longer work Check the PC Card status 1 Click Start 2 Click My Computer icon with the secondary button then click Properties The System Properties dialog box appears 3 Click the Hardware tab 1 96 lf Something Goes Wrong Resolving a hardware conflict 4 Click the Device Manager button Double click the PCMCIA adapter Double click the appropriate PC Card The operating system displays your PC Card s Properties dialog box which contains information about your PC Card configuration and status The computer stops working hangs when you insert a PC Card The problem may be caused by an I O input output conflict between the PCMCIA socket and another device in the system Use Device Manager to make sure each device has its own I O base address See Fixing a problem with Device Manager on page 184 for more information Since all PC Cards share
117. mfortable than a conventional chair Whichever type you choose use the following guidelines to adjust your chair for maximum computing comfort y a C S Approximately aes 90 degree angles Below eye level _ Correct posture and positioning of the computer o Position your chair so that the keyboard is at or slightly below the level of your elbow You should be able to type Getting Started 4 Selecting a place to work comfortably with your shoulders relaxed and your forearms parallel to the floor If you are using a conventional chair e hS Your knees should be slightly higher than your hips If necessary use a footrest to raise the level of your knees and ease the pressure on the back of your thighs Adjust the back of your chair so that it supports the lower curve of your spine If necessary use a cushion to provide extra back support Lower back support cushions are available at many office supply stores Sit with your back straight so that your knees hips and elbows form approximately 90 degree angles when you work Avoid slumping forward or leaning back too far Lighting Proper lighting can improve the visibility of the display and reduce eyestrain e hS e Position the display panel or external monitor so that sunlight or bright indoor lighting does not reflect off the screen Use tinted windows or shades to reduce glare Avoid p
118. mlock light Glows green when the numeric overlay is on When this light is on pressing an overlay key produces the white number printed on the key instead of the letter printed on the top of the key For more information see Using the overlay to type numeric data on page 70 36 Finding Your Way Around Display system buttons Display system buttons Enter menu button Up button F 9 A E E E E a eS ES SS A SS Use the four buttons below the screen on the right to perform the following functions Windows Security button Performs the same function as pressing Ctrl Alt and Del simultaneously once Down button Programmable button Up button Programmable button Enter menu button Programmable button To use the Enter feature click once To use the Menu feature click and hold the button down until the following Tablet menu appears Auto Ingtant Display Adjust In Touch Rotation security Modes Brightness wireless Button es oe Antenna Management On Off Utility Sample Tablet menu Finding Your Way Around 3 Display system buttons Use the Up or Down buttons to move to the item you would like to quickly access and then press the Enter menu button to select it For more information on the functions of Tablet menu items see Tablet and Pen Settings on page 163 Chapter 2 Getting Start
119. mputer s battery light gives you an indication of the battery s current charge hS No illumination means the battery is not in use and the AC Adapter is not connected Green means the battery is fully charged Amber means the battery is charging AC Adapter connected Flashing amber means the battery charge is low and it is time to recharge the battery or plug in the AC Adapter HINT Be careful not to confuse the battery light o with the on off light y When the on off light flashes amber it indicates that the system is suspended using the operating system Standby command 92 Mobile Computing Monitoring battery power Determining remaining battery power NOTE Wait at least 16 seconds after turning on the computer before trying to monitor the remaining battery power The computer needs this time to check the battery s remaining capacity and perform its calculations Click Start then click Control Panel Click Performance and Maintenance Click the Toshiba Power Saver icon The Power Saver Properties window appears The current power source and battery power remaining section displays the current charge state of the battery The value is shown as a percentage of remaining battery charge TECHNICAL NOTE The computer drains the battery faster at low temperatures Check your remaining charge frequently if you are working in temperatures below 50 degrees Fahrenheit
120. n Inea d o o Toshiba Information Systems Ljubljanska 80 Espa a S A 61230 Domzale Parque Empresarial San Slovenia Fernando Edificio Europa la Planta Escalera A 28831 Madrid San Fernando de Henares Spain Sweden Switzerland Scribona PC AB Ozalid AG Sundbybergsv egen 1 Herostrasse 7 Box 1374 8048 Z rich 171 27 Solna Switzerland Sweden lf Something Goes Wrong 209 Toshiba s worldwide offices United Kingdom United States Toshiba Information Systems Toshiba America Information U K Ltd Systems Inc Toshiba Court 9740 Irvine Boulevard Weybridge Business Park Irvine California 92618 Addlestone Road United States Weybridge KT15 2UL United Kingdom The Rest of Europe Toshiba Europe I E GmbH Hammfelddamm 8 D 4 1460 Neuss Germany Appendix A Hot Keys Hot keys are keys that when pressed in combination with the Fn key turn system functions on and off Hot keys have a legend on the key indicating the option or feature the key controls Volume Mute Fn E This hot key enables disables volume mute on your computer When volume mute is enabled no sound will come from the speakers or headphones Password security F1 Fn L This hot key blanks the display Without a password The Fn F1 key combination turns off the display and activates instant security Using the pointing device or any key will make the display reappear 210 mtn 217 Password security With a passwor
121. n and the battery light should glow amber to indicate that the battery is being charged If the DC IN or AC power light indicator does not glow power is not being supplied Check the connections to the AC adapter and power cable 5 Charge the battery until the battery light glows green If you have extra batteries rotate their use If you will not be using the system for an extended period more than one month remove the battery Disconnect the AC adapter when the battery is fully charged Overcharging makes the battery hot and shortens life If you are not going to use the computer for more than eight hours disconnect the AC adapter Store spare batteries in a cool dry place out of direct sunlight Using additional batteries If you spend a lot of time traveling and need to work for many hours without an AC power source you may want to carry additional charged batteries with you You can then replace a discharged battery and continue working Battery safety precautions o e Turn off the computer s power immediately and disconnect the power cable from the power socket 1f the battery produces an odor overheats or changes color or Mobile Computing 89 Charging batteries shape while it is being used or charged Carefully remove the battery from the computer Never try to disassemble a battery Never overcharge or reverse charge a battery Overcharging will shorten its life and reverse charging
122. n be executed by a computer The general classes of programs also called software are operating system application and utility See also operating system application utility properties The attributes of an object or device For example the properties of a file include the file s type size and creation date 232 0 R RAM random access memory Volatile memory that can be written to as well as read By volatile we mean that information in RAM is lost when you turn off your computer This type of memory is used for your computer s main memory See also memory Compare ROM random access memory See RAM read only memory See ROM reboot See boot restart removable disk A disk that can be removed from a disk drive A diskette is one example of a removable disk resolution A measure of the sharpness of the images that can be produced by a printer or displayed on a screen For a printer resolution is expressed in dots per inch dpi For a screen it is expressed as the number of pixels available horizontally and vertically restart Synonymous with reboot To reset the computer by reloading the operating system without turning the computer off See also boot RJ11 A modular connector used on most U S telephone systems and direct connect modems The RJ11 connector is a 6 wire connector ROM read only memory Non volatile memory that can be read but not written to By non vo
123. n commands power off the computer The Windows XP Professional operating system uses Turn Off if you are not connected to a Windows network server domain server It uses Shut down if you are connected to a Windows network server domain server Factors to consider when choosing Turn Off or Shut down e e No power is used while the computer is turned off This is the most efficient mode if you will be away from your computer for an extended time Restarting from Turn Off or Shut down uses the most time and battery power When starting up again the system does not automatically open the programs and files you were previously using Restart command Restart is the same as Turn Off or Shut down but automatically powers up the computer Use it when you need to reload the operating system for example to activate changes to system settings 1 36 Enhancing Productivity Powering down the computer Hibernation command The Hibernation command powers off the computer but it first saves the current state of the computer to the hard disk Since Hibernation does not require power to maintain the saved information the system settings are retained indefinitely Restoring information from the hard disk takes longer than restoring it from memory When you start up again the computer runs a self test loads the operating system and then returns to the state in which you left it Factors to consider when
124. nce of a hazard that could CAUTION This icon indicates the existence of a hazard that could result in damage to equipment or property if the safety instruction iS not observed NOTE This icon indicates information that relates to the safe E operation of the equipment or related items 2 4 Introduction Other documentation Other icons used Additional icons highlight other helpful or educational information TECHNICAL NOTE This icon highlights technical information Yo about the computer f y DEFINITION This icon indicates the definition of a term used in the text as HINT This icon denotes helpful hints and tips Other documentation Your computer comes with the following documentation This electronic version of the user s guide Guides for other programs that may come preinstalled on your computer and for additional programs on your Recovery CDs Accessories information which lists accessories available from Toshiba and explains how to order them The Microsoft Windows operating system documentation which explains the features of the operating system Introduction 2 D Service options Service options Toshiba offers a full line of service options built around its SelectServ warranty programs For more information visit Toshiba s Web site at Toshiba com If you have a problem or need to contact Toshiba see Tf Something Goes Wro
125. nd portable multimedia computers With your new Toshiba notebook computer your access to information can accompany you wherever you go You will find that your Microsoft Windows XP Professional operating system is already installed on your computer It offers exciting features and easy Internet access This guide This guide introduces the computer s features You can Read the entire guide from beginning to end Skim through and stop when a topic interests you Use the table of contents and the index to find specific information If you are new to computers or have not used a notebook computer before read through the first couple of chapters to familiarize yourself with the components of the computer and how to turn it on After that seek out whatever interests you most 22 Introduction 2 Safety icons Go Safety icons This manual contains safety instructions that must be observed in order to avoid potential hazards that could result in personal injuries damage to your equipment or loss of data These safety cautions have been classified according to the seriousness of the risk and the icons highlight these instructions as follows DANGER This icon indicates the existence of a hazard that could result in death or serious bodily injury if the safety instruction is not observed result in bodily injury if the safety instruction is not observed W WARNING This icon indicates the existe
126. nd the battery discharges fully your information will be lost Be sure to save your work often Using Turn Off or Shut down If you are not connected to a Windows network server domain server power off the computer as follows To turn off the computer 1 Click Start Turn off computer The Turn off computer window appears Turn off computer F _ oQ Stand By Turn OFF Restart Cancel Sample Turn off computer window 2 Click Turn Off The computer turns itself off If you are connected to a Windows network server domain server power off the computer as follows 1 3 8 Enhancing Productivity Using Turn Off or Shut down 1 Click the Start button then Shut down The Shut Down window appears Select Shut down from the drop down list Click OK The computer shuts down completely Turning off more quickly In addition to the method described above you can turn off the computer by pressing the power button To use this method you first need to turn on the feature in TOSHIBA Power Saver 1 Click Start Control Panel The Control Panel window appears Click Performance and Maintenance Double click the Toshiba Power Saver icon The TOSHIBA Power Saver Properties window appears T TOSHIBA Power Saver Properties Power Save Modes Hibernate s The Power Save Modes are a series of settings for power management You can change which mode your computer is using change the settings f
127. ng on page 175 Chapter 1 Finding Your Way Around This chapter presents a grand tour of your computer with illustrations to guide you along your way It serves as a reference when you need to locate specific parts of the computer Making sure you have everything Before you do anything else consult the Quick Start Card that shipped with your computer to make sure you received everything If any items are missing or damaged contact your authorized Toshiba representative or your network administrator Finding where everything is located The next few pages take you on a guided tour of your computer 20 Finding Your Way Around 2 Finding where everything is located Front with the display panel closed Battery lock indicator IR port Headphone jack system indicator panel Microphone jack Microphone jack The 3 5 mm microphone jack lets you connect an external monaural microphone or other audio input device Connecting a microphone or other device to this jack automatically disables the internal microphone Headphone jack The 3 5 mm headphone jack lets you connect stereo headphones or other audio output devices Connecting headphones or other devices to this jack automatically disables the internal speakers Volume control dial The volume control dial lets you adjust th
128. ng taskbar 119 D desktop browsing style 121 changing styles 121 personalizing 119 Device Manager 184 checking properties 184 185 disabling a device 184 digital audio WAV files 133 Digital Subscriber Lines DSL 83 discs handling 78 inserting 77 removing 78 Disk Defragmenter 66 191 disk drive corrupted damaged data files 191 missing files trouble accessing a disk 190 running slow 191 diskette care 75 copying documents to 74 copying files 74 inserting and removing 73 protecting stored data 75 diskette drive attaching external USB 103 can t insert a diskette 192 can t read a diskette 192 display doesn t look normal flickers 189 external monitor not working 190 external monitor connecting 104 external adjusting 105 hot key 105 screen is blank 188 display latch 27 display panel adjusting 30 closing 62 opening 30 turn off automatically 96 display release button 27 displaying folder information 124 disposing of battery 100 DMA Direct Memory Access 182 double click 55 downloading 85 DVD drive connecting 104 DVD player general problems 199 DVD ROM drive opening 77 troubleshooting 192 using 76 E email 84 environment computer friendly 38 ergonomics 39 40 41 error Messages device driver conflict 181 general hardware problem 181 non system disk or disk error 178 192 problem with display settings current settings not working with hardware 190 program has performed an illegal opera
129. ng up a direct cable connection To establish a direct cable connection with another computer 1 2 NA Oo A U 8 Click Start All Programs Point to Accessories Communications and click New Connection Wizard Click Next Select Set up an advanced connection Click Next Select Connect directly to another computer Choose the appropriate role for your computer Guest Host Follow the on screen instructions Setting up a wireless connection For information on how to set up a wireless connection refer to your wireless networking device documentation Accessing the wireless modules using your system tray The following information applies to systems with the optional Wi Fi and Bluetooth features When using your Wi Fi Mini PCI module and or Bluetooth module your computer may display an icon in the desktop s 1 30 Enhancing Productivity Exchanging data with another computer system tray to indicate that it is in use Do not confuse the system tray s icon with other removable PC Card devices you may have installed Your Wi Fi Mini PCI and Bluetooth modules are integrated into your computer system It is recommended that you do not remove the modules from your computer For assistance contact a Toshiba Wireless Authorized Service Partner Network Device Switch The Network Device Switch enables quick and easy setup of Internet and network settings The Network Device Switch manages profiles capt
130. ng yourself comfortable Strain and stress injuries are becoming more common as people spend more time using their computers With a little care and proper use of the equipment you can work comfortably throughout the day Ww WARNING Using the computer keyboard incorrectly may result in discomfort and possible injury If your hands wrists and or arms bother you while typing stop using the computer and rest If the discomfort persists consult a physician This section provides hints on avoiding strain and stress injuries For more information consult books on ergonomics repetitive strain injury and repetitive stress syndrome 40 Getting Started Selecting a place to work Placement of the computer Proper placement of the computer and external devices is important to avoid stress related injuries Place the computer on a flat surface at a comfortable height and distance You should be able to type without twisting your torso or neck and look at the screen without slouching gt Sd If you are using an external monitor the top of the screen should be no higher than eye level hesa If you use a paper holder set it at about the same height and distance as the screen Seating and posture When using your computer maintain good posture with your body relaxed and your weight distributed evenly Proper seating is a primary factor in reducing work strain Some people find a backless chair more co
131. ny Procedures The goal of the telephone company is to provide you with the best service it can In order to do this it may occasionally be necessary for them to make changes in their equipment operations or procedures If these changes might affect your service or the operation of your equipment the telephone D company will give you notice in writing to allow you to make any changes necessary to maintain uninterrupted service If Problems Arise If any of your telephone equipment is not operating properly you should immediately remove it from your telephone line as it may cause harm to the telephone network If the telephone company notes a problem they may temporarily discontinue service When practical they will notify you in advance of this disconnection If advance notice is not feasible you will be notified as soon as possible When you are notified you will be given the opportunity to correct the problem and informed of your right to file a complaint with the FCC In the event repairs are ever needed on your modem they should be performed by Toshiba Corporation Toshiba America Information Systems Inc or an authorized representative of Toshiba Disconnection If you should ever decide to permanently disconnect your modem from its present line please call the telephone company and let them know of this change Fax Branding The Telephone Consumer Protection Act of 1991 makes it unlawful to use a computer or othe
132. o apply only when you are using battery power Click All for the settings to apply whether you are using battery power or outlet power 9 Click OK to close the Full Power Properties window 10 Click OK to close the TOSHIBA Power Saver Properties window then close the Control Panel Starting again after Turn Off or Shut down To start the computer up again press and release the power button the on off light changes to green Using Hibernation Enabling the Hibernation command Hibernation is a default setting If it should become disabled you can enable it as follows 1 Click Start Control Panel The Control Panel window appears Click Performance and Maintenance Double click the Toshiba Power Saver icon Enhancing Productivity 1 4 Using Hibernation The TOSHIBA Power Saver Properties window appears T TOSHIBA Power Saver Properties Power Save Modes Hibernate The Power Save Modes are a series of settings for power management You can change which mode your computer is using change the settings for each mode or create custom modes Plugged in Tt Power source Create copy AC power Battery remaining 100 Delete Life on Standby 96 hours _Detais Life on Hibernation 24 days i Running on batteries Create copy a Super Long Life i S Details o Abot V Show Power Saver Properties icon on the taskbar V Show Intel R SpeedStep TM Technology icon on the taskbar
133. oduct that is based on Direct Sequence Spread Spectrum DSSS radio technology and is compliant to gt hS The IEEE 802 11 Standard on Wireless LANs Revision B as defined and approved by the Institute of Electrical and Electronics Engineers The Wireless Fidelity Wi Fi certification as defined by the WECA Wireless Ethernet Compatibility Alliance Wireless LAN and your Health Wireless LAN products like other radio devices emit radio frequency electromagnetic energy The level of energy emitted by Wireless LAN devices however is far much less than the electromagnetic energy emitted by wireless devices like for example mobile phones Because Wireless LAN products operate within the guidelines found in radio frequency safety standards and recommendations Toshiba believes Wireless LAN is safe for use by consumers These standards and recommendations reflect the consensus of the scientific community and result from deliberations of panels and committees of scientists who continually review and interpret the extensive research literature In some situations or environments the use of Wireless LAN may be restricted by the proprietor of the building or responsible representatives of the organization These situations may for example include e Using the Wireless LAN equipment on board of airplanes or In any other environment where the risk of interference to other devices or services is perceived or identified as harmf
134. olarizes the light passing through it A filter over the electrodes permits only non polarized light to pass to the surface of the display creating light and dark pixels load To move information from a storage device such as a hard disk into memory for processing local area network See LAN logical drive A section of a disk that is recognized by the operating system as a separate disk drive A system s logical drives may differ from its physical drives For example a single hard disk drive may be partitioned into two or more logical drives megabyte MB A unit of data equal to 1 048 576 bytes 1024 x 1024 bytes See also bytes memory Typically refers to the computer s main memory where programs are run and data is temporarily stored and processed Memory can be volatile and hold data temporarily such as RAM or it can be nonvolatile and hold data permanently such as ROM A computer s main memory is RAM See RAM ROM microprocessor See central processing unit CPU MIDI Musical Instrument Digital Interface A standard for connecting musical instruments synthesizers and computers The MIDI standard provides a way of translating music into a form computers can use and vice versa 230 om modem Short for modulator demodulator A device that converts information from digital to analog and back to digital enabling information to pass back and forth between digital comp
135. ompare direct current DC 202 sn application A computer program that you use to perform tasks of a specific type Applications include word processors spreadsheets and database management systems See also program R backup A copy of a file usually on a removable disk kept in case the original file is lost or damaged basic input output system BIOS See BIOS baud rate The speed at which a communication device such as a printer or modem transmits information Baud rate is the number of signal changes per second not necessarily the same as bits per second See also bits per second BIOS basic input output system Basic instructions stored in read only memory ROM containing the information the computer needs in order to check hardware and load the operating system when you start up the computer bit Short for binary digit A bit is the smallest unit of information used by a computer A group of eight bits is a byte See also byte bits per second bps A way of measuring the speed at which information is passed between two devices The basic measure used in modem communications bps is similar but not identical to the baud rate See also baud rate boot To start the computer The term boot originates from bootstrap program as in pulling itself up by its bootstraps a program that loads and initializes the operating system See also reboot boot disk See
136. omputer Is on Hot swapping precautions Although you can insert a PC Card at any time remember not to remove a card while it is in use Otherwise you could lose valuable information For example Never remove a hard disk card or CD ROM drive card while the system is accessing the card Never remove a network card while you are connected to the network Never remove a SCSI card while any of the SCSI devices connected to it are operating S DEFINITION SCSI is an acronym for Small Computer Systems L Interface A Single SCSI PC Card enables you to connect several Lf SCSI devices to your computer at the same time gt Before removing a PC Card stop it by clicking the PC Card PCMCIA icon on the taskbar Expansion Options 1 1 D Using an SD card Using an SD card Your computer supports the use of an SD card The card can be used with a variety of digital products digital music players cellular phones PDAs digital cameras digital video camcorders etc CAUTION Do not touch the SD connector You could expose the storage area to static electricity which can destroy data Do not remove an SD card while data is being written or read Even when the message copying in the windows disappears the computer may be writing to the computer and your data could be destroyed Wait for the SD indicator light to go out Installing SD card drivers During installation of the SD card drive
137. omputer nor recharge the batteries Here are some typical problems and how to solve them The AC power light does not come on when you plug in the AC adapter and power cable Make sure the AC adapter and power cable are firmly plugged into both the wall outlet and the computer If the AC power light still does not come on check that the wall outlet is working properly by plugging in a lamp or other appliance lf Something Goes Wrong 1 8 Resolving a hardware conflict The AC adapter and power cable work correctly but the battery will not charge The battery doesn t charge while the computer is consuming full power Try turning off the computer The battery may not be inserted correctly in the computer Turn off the computer remove the battery clean the contacts with a soft dry cloth if necessary and replace the battery See Removing the battery from the computer on page 98 The battery may be too hot or too cold to charge properly If you think this is the probable cause let the battery reach room temperature and try again If the battery has completely discharged it will not begin charging immediately Leave the AC adapter and power cable connected wait 20 minutes and see if the battery is charging If the battery light is glowing after 20 minutes let the computer continue charging the battery for at least another 20 minutes before you turn on the computer If the battery light does not glow after 20
138. ons program It should be set up to transmit at 300 1200 2400 4800 9600 14400 28800 33600 bps bits per second or higher Refer to the program s documentation and the modem manual for information on how to change these settings TECHNICAL NOTE Disable Call Waiting before you connect Va through the modem Call Waiting interrupts data transmission lt The modem is on set up properly and still will not transmit or receive data Make sure the line has a dial tone Connect a telephone handset to the line to check this The other system may be busy or off line Try making a test transmission to someone else For more information regarding your system s V 92 modem visit the Toshiba web site at www pcsupport toshiba com lf Something Goes Wrong 1 QO Internet Problems Internet Problems My Internet connection is very slow Many factors contribute to the speed with which you can surf the Internet They include modem speed time of day when everyone else is surfing your access can be slow and popularity of the site If accessing a particular site 1s very slow try later My browser can t find the URL address I typed in Make sure you separated the domain names of the address with the forward slash Check the spelling of each name and the syntax of the address carefully A single incorrect letter missed period dot or other mistake makes it impossible for your browser to locate the site
139. or each mode or create custom modes Plugged in Power source Create copy AC power Battery remaining Delete 100 Lures Life on Standby i 101 hours _Details _ Life on Hibernation 26 days Running on batteries a Create copy u lt j 3 Details V Show Power Saver Properties icon on the taskbar Cancel Sample TOSHIBA Power Saver Properties window Enhancing Productivity 1 39 Using Turn Off or Shut down 4 Click Details in the Plugged in section The Full Power Properties window appears 5 Click the System Power Mode tab Full Power Properties General Power Save Mode System Power Mode Device Settings S These settings control system standby properties r Q 2 5 Override all Modes with settings here m When press the power button Power Off A when close the i No action Prompt for password when computer goes off Standby or Hibernation OK Cancel Apply Sample Full Power Properties window 6 Select Power Off for the option you want When I press the power button Set this option to Power Off if you want the computer to turn off when you press the power button 1 40 Enhancing Productivity Using Hibernation 7 Click Override all Modes with settings here The Set the range window appears Set the range A DC only Sample Set the range window with DC only option 8 Do one of the following Click DC only if you want the settings t
140. ot protocol You can also manually choose the boot up sequence by pressing the power button then quickly pressing the right or left arrow keys Toshiba Utilities 1 61 TOSHIBA Console Select the boot device by pressing the right or left arrow keys then pressing the Enter key eSa e e e hS e hS NOTE Since the System is a quick booting system you must press the arrow keys immediately after pressing the power button Keyboard Allows you to enable or disable Wake up from the keyboard This function only applies to the built in keyboard from Standby mode USB Allows you to enable or disable USB Legacy Emulation LAN Lets you enable or disable the Wake up on LAN feature and enable or disable the built in LAN Display Allows you to change various default settings for the built in LCD display and external video displays CPU Allows you to set the CPU Frequency Mode to one of Dynamically Switchable Always High or Always Low General Allows you to view the current BIOS Password Allows you to set user passwords Device Config Shows the Device configuration options 1 62 Toshiba Utilities The Toshiba Rotation Utility The Toshiba Rotation Utility This utility allows you to change the default setting of the display format primary portrait to three other display formats o Primary landsca
141. ot turn on the computer for example if the battery is completely discharged use a narrow object such as a straightened paper clip to press the manual eject button This button is in the small hole next to the DVD ROM eject button on the face of the DVD ROM tray Some discs run correctly but others do not Check the type of disc you are using The DVD ROM drive supports the Digital Versatile Disc DVD formats DVD ROM DVD R read only plus CD ROM CD R read only and CD RW read only If the problem is with a data CD or DVD refer to the software s documentation and check that the hardware configuration meets the program s needs The disc will not come out of the drive when you click the eject button on the screen Press the button on the DVD ROM drive itself 1 Q 4 lf Something Goes Wrong Resolving a hardware conflict sound system problems You do not hear any sound from the computer Adjust the volume control If you are using external headphones or speakers check that they are securely connected to your computer The computer emits a loud high pitched noise This is feedback between the microphone and the speakers It occurs in any sound system when input from a microphone is fed to the speakers and the speaker volume is too loud Adjust the volume control Changing the settings for the Record Monitor feature in the Recording Control Utility default Off or the Mute feature in the Mixer Utility
142. our files and then either completely Shut down your computer or put it into Hibernation mode before changing the battery 98 Mobile Computing Changing the battery Removing the battery from the computer CAUTION When handling batteries dont drop or knock them Also be careful not to damage the casing or short circuit the a terminals To remove the battery 1 Save your work Shut down and turn off the computer 2 3 Remove all cables connected to the computer 4 Turn the computer over 5 Slide the battery lock up and slide the release latch to the left Insert a fingertip in the battery pack recessed area and pull the discharged battery module out of the computer N YH Unlocking the battery Mobile Computing QO Changing the battery Removing the discharged battery protective gloves to handle it and discard it immediately following WARNING If the battery is leaking or its case is cracked put on H the advice in Disposing of used batteries safely on page 100 Inserting a charged battery 1 Wipe the terminals of the charged battery with a clean cloth to ensure a good connection 2 Insert the charged battery into the slot The battery has been designed so that you cannot install it with reverse polarity CAUTION If the battery does not slide into the Slot easily remove the battery and try again Avoid forcing the battery into position 3 Turn the computer
143. ources to Plug and Play compliant devices In theory if every device connected to the computer is Plug and Play compliant no two devices will compete for the same system resources Plug in the device and turn on your computer The operating system is automatically set up to accommodate the new device If you install an older legacy device that the operating system cannot recognize the operating system may have difficulty assigning resources to it As a result a hardware conflict can occur Resolving conflicts There are three things you can do to resolve hardware conflicts Disable the device For an older device remove it from the computer Disable another system component and use its resources for the new device see Fixing a problem with Device Manager on page 184 Reconfigure the device so that its requirements do not conflict Refer to the device s documentation for instructions about changing settings on the device 184 lf Something Goes Wrong Resolving a hardware conflict Fixing a problem with Device Manager Device Manager provides a way to check and change the configuration of a device CAUTION Changing the default settings using Device Manager can cause other contlicts that make one or more devices unusable Device Manager is a configuration tool for advanced users who understand configuration parameters and the ramifications of changing them Disabling a device 1 Click Start
144. pe o Secondary portrait o Secondary landscape To change the display format 1 Click Start select All Programs select the TOSHIBA Rotation Utility program group and then click TOSHIBA Rotation Utility The Toshiba Rotation Utility screen appears Set Orientation Select a screen orientation to use When in PC mode Primary landscape v When in Tablet PC mode Primary portrait x id Disable Rotation Utility i Cancel Default Sample Toshiba Rotation Utility screen 2 Select a new display format for either PC mode or Tablet PC mode 3 Click OK Toshiba Utilities 1 63 Tablet and Pen Settings Tablet and Pen Settings Utility to change screen rotation options and settings for the tablet yw NOIE Toshiba recommends that you use the Toshiba Rotation E feature The Tablet and Pen Settings window allows you to set various options for using the tablet and pen To access Tablet and Pen Settings From the TOSHIBA Console click the Tablet and Pen Settings icon Tablet and Pen Settings Settings Display Tablet Buttons Pen Options Handedness You can improve handwriting recognition accuracy by indicating whether you are right handed or left handed O Left handed Menu location You can select a menu position so that menus don t appear under your hand Right handed menu appears on left Left handed menu appears on right Calibration You can
145. ping Your Files Safe Setting a hard disk drive master password 2 In the Run box type c Program Files toshiba Windows Utilities HDDPW HDDPW and press Enter The Hard Disk Drive Password program HDDPW displays a warning screen To delete the hard disk drive user password click Delete HDDPW displays another warning and asks you whether you want to delete the hard disk drive user password Type your password and press Enter If the password you typed matches the registered hard disk drive user password the password is deleted Any password service diskette made with the password is now no longer valid Shut down and restart the computer for your changes to take effect Chapter 9 if Something Goes Wrong Some problems you may encounter when using your computer are relatively easy to identify and solve Others may require help from your network administrator or the manufacturer of a software program This chapter aims to help you solve many problems by yourself It covers the problems you are most likely to encounter If all else fails contact Toshiba You will find information on Toshiba s support services at the end of this chapter Problems that are easy to fix Your program stops responding If you are working with a program that suddenly freezes all operations chances are the program has stopped responding You can exit the failed program without shutting down the operating system or closing o
146. play system buttons on page 36 Intouch Select a Prograrn C ntemet default browser C Mail default e mail program Select TOSHIBA Console Restore Default TOSHIBA Carcel Sample InTouch dialog box 1 Click Start and then Control Panel 2 Click Printers and Other Hardware 3 Click the TOSHIBA Controls icon Toshiba Utilities 1 5 TOSHIBA Console 4 Make the desired selection If you choose Select your Program click the Select button make your application selection and then click OK 5 Click OK Power Management NOTE Toshiba recommends that you use the Toshiba Power Management Utility for changing system power settings The Power Management feature enables you to control your computer s power usage regardless of the source and use the many preset power modes or create one yourself To access Power Management through the TOSHIBA Console click the Power Management icon The TOSHIBA Power Saver Properties window appears l TOSHIBA Power Saver Properties Power Save Modes Hibernate The Power Save Modes are a series of settings for power management You m can change which mode your computer is using change the settings for each mode or create custom modes p Plugged in N Power source Create copy AC power Battery remaining _ Delete 100 Life on Standby 7 101 hours _ Details Life on Hibernation 26 days Running on batteries a Create
147. power source even though the computer is off to fully charge the battery When the battery light glows green the battery is fully charged Guidelines for powering off the computer If you have work in progress and if you are not connected to a network use the Hibernate command to save your system settings to the hard disk so that when you turn on the computer again you automatically return to where you left off To leave the computer off for a longer period power down the computer The Windows XP Professional operating system uses the Shut down command to power down the computer if you are connected to a Windows network server domain server or the Turn Off command if you are not When the hard disk drive light on the system indicator panel is on don t turn off the power Doing so may damage your hard disk For more information see Powering down the computer on page 134 62 Getting Started Caring for your computer Closing the display panel When you are finished using the computer power off and close the display panel to keep dust and dirt out of the computer If you close the display panel while the computer is still on one of these actions will occur o If you have the audible warning set the computer will beep to notify you that it is still on See Toshiba Hardware Setup on page 160 If you have an action feature set the computer will perform that action Nothin
148. purchase an optional PORT Noteworthy computer lock cable PORT Noteworthy computer lock cable To secure the computer 1 Loop the cable through or around some part of a heavy object Make sure there is no way for a potential thief to slip the cable off the object 64 Getting Started Caring for your computer Pass the locking end through the loop W 3 _ Insert the cable s locking end into the security lock slot on your computer then engage the locking device The computer is now securely locked Chapter 3 Learning the Basics This chapter lists computing tips and provides important information about the system s basic features Computing tips Save your work frequently Your work temporarily stays in the computer s memory until you save it to the disk You will lose all unsaved work if for example a system error occurs and you must restart your computer or your battery runs out of charge while you are working Your computer can be configured to warn you when the battery is running low See Setting battery alarms on page 95 HINT Some programs have an automatic save feature which you can turn on This feature saves your file to the hard disk at preset intervals See your software documentation for details 65 66 Learning the Basics Using the keyboard Back up your files to diskettes or other removable storage media on a regular basis Label the backup copies clearly
149. r title you are watching To disable the screen saver 1 Click Start Control Panel nan AeA UO N The Control Panel window appears 2 Click Appearance and Themes and double click the Display icon The Display Properties dialog box appears 3 Click the Screen Saver tab In the Screen Saver list the current screen saver 1s highlighted 202 lf Something Goes Wrong Develop good computing habits 4 Click the down arrow at the right of the current screen saver name A list of screen savers displays 5 Click and hold the up arrow by the list or move the slide to the top Click None Click OK Develop good computing habits Make sure you are prepared Save your work frequently You can never predict when your computer will lock forcing you to close a program and lose unsaved changes Many software programs build in an automatic backup but you should not rely solely on this feature Save your work See Computing tips on page 65 for instructions On a regular basis back up the information stored on your hard disk Here are some ways you can do this gt h S Copy files to diskette e Connect a tape drive to the system and use specialized software to copy everything on the hard disk to a tape Connect your computer to the office network and copy files to your network partition Some people use a combination of these methods backing up all files to tape weekly and copying crit
150. r Options The Folder Options dialog box appears Folder Options General View File Types Tasks Show common tasks in folders Browse folders Open each folder in the same window Open each folder in its own window Click items as follows Single click to open an item point to select Double click to open an item single click to select Restore Defaults Sample Folder Options dialog box 3 Click the preferred options 4 Click Apply then OK Personalizing individual windows Just as you can display a Web page on your desktop you can also display a Web page in an individual window If you subscribe to the Web page it can be automatically updated on a regular basis For example using this Web integration feature you can monitor weather game scores stock prices or headlines all in the window of your choice Enhancing Productivity 1 23 Personalizing your desktop Customizing window toolbars You can display one or more customizable toolbars at the top of a window As you browse the operating system detects the kind of information presented in the window and automatically displays the appropriate toolbar buttons and menus You can also add these toolbars to the taskbar Address bar Standard buttons Fie Edit View Favorites Tools Help Files Stored on This Computer a Ga Shared Documents Recycle Bin Hard Disk Drives ee 53408200000 C er Local Disk D
151. r coded as follows Available keys are white Assigned keys and keys associated with a popup list are shown on the Fn esse keyboard in the selected color Unavailable keys are not shown Toshiba Utilities 1 D Fn esse Assigning a key to a program or document There are two ways to assign a key to open a program or document Drag and drop Use the keyboard or pointing device The method most often used is drag and drop Using drag and drop To assign a key to a program or document 1 Start both Fn esse and Windows Explorer or the program supporting drag and drop 2 Resize the Explorer window so that you can see both the Fn esse keyboard and Explorer at the same time 3 In the Explorer window highlight the program or document file you wish to assign to a key 4 Click and hold the primary button as you drag the highlighted item from Explorer to the key on the Fn esse keyboard you want to assign to it 5 Release the primary button Fn esse displays the Add Edit Command dialog box with the Description Command Line and Working Directory fields automatically completed 6 Click OK to close the Add Edit Command dialog box with your key assignment in place The program or document is now associated with the key you just selected To open the program or document press Fn plus the appropriate key from within any Windows program 192 Toshiba Utilities Fn esse Using the keyboard or pointing d
152. r electronic device to send any message via a telephone fax machine unless such message clearly contains in a margin at the top or bottom of each transmitted page or on the first page of the transmission the date and time it is sent and an identification of the business other entity or individual sending the message and the telephone number of the sending machine or such business other entity or individual In order to program this information into your fax modem you should complete the setup for your fax software before sending a message Instructions for IC CS 03 certified equipment 1 NOTICE The Industry Canada label identifies certified equipment This certification means that the equipment meets certain telecommunications network protective operational and safety requirements as prescribed in the appropriate Terminal Equipment Technical Requirements document s The Department does not guarantee the equipment will operate to the user s satisfaction Before installing this equipment users should ensure that it is permissible to be connected to the facilities of the local telecommunications company The equipment must also be installed using an acceptable method of connection The customer should be aware that compliance with the above conditions may not prevent degradation of service in some situations Repairs to certified equipment should be coordinated by a representative designated by the supplier Any repairs or alteration
153. r light 34 accessories carrying case 101 PORT Noteworthy computer lock cable 63 audio WAV digital wave files 133 features 132 playing 80 Backup or Restore Wizard 75 76 basics keyboard 66 67 battery additional ones 88 alarms 95 changing 97 98 charge indicator light 91 charge not lasting 187 charging 89 conserving power 93 lights 34 low charge 92 module 33 monitoring power 91 not charging 187 optional charger 91 power usage mode 94 real time clock RTC 87 remaining power 92 removing 99 safe disposal 100 status 34 unlocking 98 battery light 34 battery lock 27 Bluetooth 131 module 130 button display release 27 buttons control 55 primary control 55 secondary control 55 239 236 ai C channels DMA 182 IRQ 182 checking device properties 184 cleaning the computer 63 click 55 COM port 126 command Shut down 135 Turn Off 135 communications cable free 27 network connection 81 127 setting up 81 system resources 182 computer display release button 30 lock 63 non system disk or disk error message 178 not accessing disk drives 178 setting up 43 44 warning resume failure message 178 computing tips 65 configuring password 166 connecting DVD drive 104 external monitor 104 external USB keyboard 48 external USB mouse 48 modem to telephone line 49 printer 48 to a network 81 USB compatible mouse 48 control buttons 55 cooling vent 28 copying files 128 cursor control overlay 35 71 customizi
154. r network 2 To send font data from the computer to a printer See also upload 226 om drag To hold down the mouse button while moving the cursor to drag a selected object In the Windows operating system this refers to the left mouse button unless otherwise stated driver See device driver DVD An individual digital versatile or video disc See also DVD ROM DVD ROM digital versatile or video disc read only memory A very high capacity storage medium that uses laser optics for reading data Each DVD ROM can hold as much data as several CD ROMs Compare CD ROM F emulation A technique in which a device or program imitates another device or program enable To turn on a computer option See also disable executable file A computer program that is ready to run Application programs and batch files are examples of executable files Names of executable files usually end with a bat or exe extension expansion device A device that connects to a computer to expand its capabilities Other names for an expansion device are port expander port replicator docking station or network adapter extension See file extension external device See device file A collection of related information saved on disk with a unique name A file may be a program information used by a program or a document See also document file allocation table FAT The section of a disk that keep
155. r television interference caused by unauthorized modification of the devices included with this Bluetooth Cards from Toshiba or the substitution or attachment of connecting cables and equipment other than specified by Toshiba The correction of interference caused by such unauthorized modification substitution or attachment will be the responsibility of the user CD ROM DVD ROM DVD ROM CD RW Safety Instructions The CD ROM DVD ROM and DVD ROM CD RW drives employ a laser system To ensure proper use of this product please read this instruction manual carefully and retain for future reference Should the unit ever require maintenance contact an authorized service location Use of controls adjustments or the performance of procedures other than those specified may result in hazardous radiation exposure To prevent direct exposure to the laser beam do not try to open the enclosure Location of the required label Sample shown below Location of the label and manufacturing information may vary 11 Product is certified by the manufacturer to comply with DHHS rules 21 CFR sub chaper J applicable at the date of manufacture MANUFACTURED Toshiba Corporation 1 1 Shibaura 1 Chome Minato Ku Tokyo 105 0061 Japan CLASS 1 LASER PRODUCT LASER KLASSE 1 CAUTION This appliance contains a laser system and is classified as a CLASS 1 LASER PRODUCT To use this model properly read the instruction manual carefully
156. re If you enter an incorrect password the computer beeps After three incorrect attempts the system turns off automatically Using the instant user level password An instant password secures your system with a single keystroke Use this feature when you need to leave your desk for a few minutes and don t want to turn off the computer To use an instant password press Fn and F1 simultaneously Pressing this hot key freezes the keyboard and TouchPad and blanks the screen An instant password has no effect on an optional serial mouse or trackball If you have not registered a user level password press Enter to unlock your system If you have registered a user level password press Enter type your password and press Enter If you enter the password Keeping Your Files Safe 1 69 Hard disk drive passwords correctly the computer returns to where it was when you pressed the hot key Hard disk drive passwords Your computer comes with a program preinstalled that lets you set two types of hard disk drive passwords user and master These passwords protect your primary and secondary hard disks as follows Setting a hard disk drive user password prevents an unauthorized user from accessing your hard disk even if it is removed and installed on another computer This password does not encrypt data on the hard disk Setting a hard disk drive master password lets you bypass the hard disk drive user password and ac
157. ress the display panel release button and lift the display panel Press and hold in the power button until the on off light on the system indicator panel glows green about one second Expansion Options 1 07 Using tablet mode 3 Rotate the display panel clockwise 180 degrees When you complete this task the screen faces away from the keyboard CAUTION When rotating LCD screen of your computer be sure to Slowly turn the screen in the proper direction and not apply excessive force or speed y Aor A Wy WY y _ Ye YA ji W yyy ILLES ve 7 Rotating the display panel clockwise 180 4 Flip the display latch so it points toward the back of the LCD screen 5 Fold the display panel down flat over the keyboard The display latch will click and lock the screen in tablet position 1 08 Expansion Options Using tablet mode Display latch Folding the display panel down flat By default the computer desktop will automatically rotate to primary portrait view For more information on changing tablet screen settings see The Toshiba Rotation Utility on page 162 Using tablet mode 1 Press the dimple at the bottom of the Toshiba tablet pen to remove it from the slot at the edge of the display panel Removing the Toshiba tablet pen from the slot on the tablet
158. rmation with other systems and making backup copies of the files stored on your hard disk Connecting the optional external USB diskette drive You can attach the optional external USB diskette drive to a USB port on the computer USB connector Eject button Diskette slot Diskette in use light Va Optional external USB diskette drive and connector cable TECHNICAL NOTE You may attach the optional external USB diskette drive while the computer is on or off If you attempt to access the drive when it is not attached to the computer you will receive an error message To attach the optional external USB diskette drive cable to a USB port on the computer gently push the connector into the USB port The computer automatically recognizes the optional external USB diskette drive and calls it A 1 0 4 Expansion Options Using an optional external DVD ROM drive Using an optional external DVD ROM drive An optional external DVD drive allows you to use CDs and DVDs and is useful for installing software on the hard disk and exchanging information with other systems Optional external DVD ROM drive Connecting the optional external DVD drive You can install the external drive in the PC Card slot on the left side of the computer Alternatively if you have a PC Card SCSI adapter you can use a SCSI CD ROM drive Using external display devices L Your computer comes with a built in LCD display but
159. rning the Basics 15 Backing up your work Taking care of diskettes To protect the data stored on your diskettes o Store your diskettes in their boxes or other containers to protect them and keep them clean Keep diskettes at room temperature and avoid exposing them to direct sunlight Otherwise data may be lost Keep your diskettes away from sources of magnetism such as speakers and radios since these can destroy data Clean dirty diskettes with a soft cloth moistened in water Do not use cleaning fluids Avoid Sliding back the protective metal cover Touching the magnetic surface of a diskette Fingerprints can prevent the drive from reading the data held on a diskette Twisting or bending a diskette Placing heavy objects on your diskettes Eating smoking or using erasers near your diskettes Foreign particles can damage the surface Backing up your work To back up several files at one time use the Backup or Restore Wizard You can choose the files and the type of backup you want to perform 1 Connect the backup device to your computer as shown in the manufacturer s instructions 2 Click Start All Programs Accessories System Tools Backup The Backup or Restore Wizard window appears 16 Learning the Basics Restoring your work Backup or Restore Wizard Welcome to the Backup or fea Restore Wizard gt ik This wizard helps you back up or restore the files and settin
160. rs one or more dialog boxes may appear indicating that the driver is not digitally signed The message may appear as Digital Signature not found About Secure Digital Emulation from Toshiba Click Yes to continue Installing the SD card in the SD slot To insert an SD card turn the card so that the connector metal area faces down then push the card in the slot until it locks in place If the operating system does not recognize an inserted SD card remove and insert it again The green LED on the right side of the SD card slot will glow when the card is being accessed CAUTION If the SD card is not inserted into the slot correctly any data saved to the card may be lost 1 1 O Expansion Options Using an SD card Formatting an SD card If you want to format your SD card you may do so using Windows operating system formats such as FAT16 FAT32 or NTFS After formatting is complete there is a possibility that the SD card may become unusable on some devices which have an SD card slot If you want to use the card on more than one device make sure the devices all support the format you have selected To verify check with the device s documentation NOTE Multi Media Cards MMCs are not supported by this product Stopping or removing the SD card after formatting If you have formatted the SD card drive with the Windows operating system format see Formatting an SD Card in the preceding s
161. rsonalizing your desktop 7 To browse the Gallery for more components to add click Visit Gallery In order to browse an active Internet connection must be established 8 To select some other Web site type the address of the Web site you want or click Browse to locate it You can configure the Web content interface in several other ways For further information see your operating system documentation or access Windows Help by clicking Start Help and Support Changing desktop and browsing style The operating system enables you to customize the way you view your desktop and browse the files and folders on your local computer or network file server You can specify that Items that normally require a double click will open with a single click Folders will open in their own window instead of in the same window Folders are accompanied by a list of common tasks instead of being displayed alone The options you choose determine how you browse in the operating system regardless of whether you start from the desktop My Computer Windows Explorer or Internet Explorer For more information about changing your desktop style enter desktop in the Help and Support Index Choosing a style To select desktop and browsing style options 1 Click Start then click My Computer 1 292 Enhancing Productivity Personalizing your desktop The My Computer window appears 2 Select the Tools menu then click Folde
162. rting Windows XP message appears The operating system takes a long time to start The operating system responds differently from the normal routine The screen does not look right Unless a hardware device has failed problems usually occur when you change the system in some way such as installing a new program or adding a device If you experience any of these problems use the options in the Startup menu to fix the problem Using Startup options to fix problems If the operating system fails to start properly you may have to change your system s configuration or verify the startup procedure to fix the problem To do this use the options in the Startup menu This section describes each option and when to use the procedure To open the Startup menu 1 Restart your computer 2 Press F8 when your computer starts The Windows Advanced Options menu displays these options Safe Mode Safe Mode with Networking Safe Mode with Command Prompt Enable Boot Logging Enable VGA Mode Last known good configuration your most recent settings that worked 1 80 lf Something Goes Wrong The Windows operating system is not working Directory Services Restore Mode Windows domain controllers only gt h Sd Debugging Mode Start Windows normally Reboot Return to OS Choices menu gt h Sd See your Windows documentation for further explanation TECHN
163. s 132 Recording SOuUndS n 133 Using a MICrophone enen 133 Adjusting recording settings eee 134 Powering down the computer sssscccsccce 134 Turn Off or Shut down command 0 135 Restart command ccc eccceeesseesseeeeeeees 135 Hibernation command l c 136 Standby COMMANA ceecee 136 Using Turn Off or Shut down eee 137 Turning off more Quickly ccnn 138 starting again after Turn Off or Shut down 140 Using Hibernation cecene 140 Contents d o Enabling the Hibernation command 140 Going into Hibernation mode es 142 Going into Hibernation mode more quickly 143 Starting again from Hibernation 0 144 Using Standby ceecee 144 Going into Standby mode more quickly 145 Starting again from Standby ees 148 Chapter 7 Toshiba Utilities eee 149 FIDO SS E E E A E 149 Starting FN S eenn 150 Assigning a key to a program or document 151 Viewing existing key assignments 153 Changing or removing existing key ASSIQNMENES ereere 153 OKEY UUNTY ccedtsacetestanceathsecauua socenecedaaceetiacasortaes 153 TOSHIBA Console ccce 154 Customize Your Computer cees 155 NetWork ee 156 SCU ase Oe en ne en ee 156 TOSHIBA Controls scce 156 Power Management ccenn 157 Toshiba Hardware Setup oneee 160 The Toshiba Rotation Utility ee 162 Tablet and Pen SettingS 0 cc cess eeeeeen 163 Chapter 8 Keeping Your Files S
164. s is connected to the earth and is the point of reference for voltages in the circuit hard disk A storage device composed of a rigid platter or platters that can be magnetically coded with data Hard disks hold much more information than diskettes and are used for long term storage of programs and data The primary or only hard disk in a computer is usually fixed but some computers have secondary hard disks that are removable By default the hard disk is referred to as drive C hardware The physical components of a computer system Compare software 228 om Hibernation A feature of many Toshiba notebook computers that saves to the hard disk the current state of your work including all open files and programs when you turn the computer off When you turn on the computer again your work 1s returned to the same state it was when the computer was turned off See also Standby Suspend high density diskette A 3 5 inch diskette that holds 1 44 MB of data See also diskette hot key 1 A feature in which certain keys in combination with the Fn key can set system options or control system parameters such as the battery save mode 2 A key or combination of keys that activates a memory resident program hot swapping The ability to add or remove devices from a computer while the computer is running and have the operating system automatically recognize the change icon A small image displayed on the
165. s made by the user to this equipment or equipment malfunctions may give the telecommunications company cause to request the user to disconnect the equipment Users should ensure for their own protection that the electrical ground connections of the power utility telephone lines and internal metallic water pipe system if present are connected together This precaution may be particularly important in rural areas Caution Users should not attempt to make such connections themselves but should contact the appropriate electric inspection authority or electrician as appropriate The user manual of analog equipment must contain the equipment s Ringer Equivalence Number REN and an explanation notice similar to the following The Ringer Equivalence Number REN of this device can be found on the label affixed to your computer NOTICE The Ringer Equivalence Number REN assigned to each terminal device provides an indication of the maximum number of terminals allowed to be connected to a telephone interface The termination on an interface may consist of any combination of devices subject only to the requirement that the sum of the Ringer Equivalence Numbers of all the devices does not exceed 5 The standard connecting arrangement telephone jack type for this equipment is jack type s USOC RJILIC Wireless Interoperability The Toshiba Wireless LAN Mini PCI Card products are designed to be interoperable with any wireless LAN pr
166. s antenna s must not be co located or operating in conjunction with any other antenna or transmitter NOTE Changes or modifications made to this equipment not expressly approved by Toshiba or parties authorized by Toshiba could void the users authority to operate the equipment Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy If not installed and used in accordance with the instructions it may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try and correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the distance between the equipment and the receiver gt gt gt hS Connect the equipment to an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help Toshiba is not responsible for any radio o
167. s green DANGER Damaged power cables can cause fire or electric shock Never modify forcibly bend place heavy objects on top of or apply heat to the power cable If the power cable becomes damaged or the plug overheats dis continue use There is a risk of electric shock Never remove the power plug from the outlet with wet hands Doing so may cause an electric shock CAUTION Use of the wrong AC adapter could damage your computer Toshiba assumes no liability for any damage in such cases Never pull directly on the power cable to unplug it Hold the power plug when removing the cable from the outlet Getting Started 53 Using the computer for the first time Using the battery Your computer came with its battery already installed Before using the battery to power the computer you must first charge it To charge the battery leave the computer plugged in until the battery light glows green After that the battery will be completely charged and ready to power the computer For more information about installing or removing the battery see Changing the battery on page 97 Connecting other external devices For more information on attaching other external devices such as a keyboard and diskette drive see Expansion Options on page 102 Using the computer for the first time For information on connecting devices see Setting up your computer on page 43 Opening the display pane
168. s track of the location of files stored on the disk file name A set of characters that uniquely identifies a file within a particular folder It consists of two parts the actual name and the file name extension See also file extension Glossary 221 file extension The three characters following the period pronounced dot at the end of a file name The extension indicates the type of file Examples are exe for program files and hlp for help files See also file name folder Also called directory A container for organizing files saved to a disk A folder is symbolized on screen by a graphical image icon of a file folder A folder can contain files and other folders format verb To prepare a blank disk for use with the computer s operating system Formatting creates a structure on the disk so the operating system can write information to the disk or read information from it frontside bus The primary pathway bus between the CPU and the computer s main memory Also called system bus See also bus function keys The keys labeled F1 through F12 typically located on the keyboard Their function is determined by the operating system and or individual programs gigabyte GB A unit of data equal to 1 073 741 824 bytes 1024 x 1024 x 1024 bytes See also byte ground A conductor to which all components of an electric circuit are connected It has a potential of zero O volt
169. se Agreement and click Next Enter your name and the name of your company or organization and click Next Enter the information about your computer NOTE If your computer has the Microsoft Windows XP Professional operating system and will be connected to a network consult your system aaministrator before you choose your computer name and network settings Set the correct date time and time zone for your computer and click Next Your computer restarts automatically Registering your computer with Toshiba Registering your computer lets Toshiba keep you up to date with information about new products and upgrades and also extends your Toshiba warranty worldwide at no charge to you You can register your computer with Toshiba by double D 8 Getting Started Using the computer for the first time clicking the icon on your desktop or by mailing the registration card that may ship with your computer NOTE To register online your computers modem must be 7m E connected to a voice grade telephone line Using your computer in tablet mode One of your computer s features is a convertible display that allows you to use the screen much as you would a writing tablet Rotating the screen By simply rotating and folding the screen over the keyboard your system is ready to use in tablet mode with the included Toshib
170. sends the results to another device that uses the information character Any letter number or symbol you can use on the computer Some characters are non printing characters such as a paragraph break in a word processing program A character occupies one byte of computer storage chip A small piece of silicon containing computer logic and circuits for processing memory input output and or control functions Chips are mounted on printed circuit boards click To press and release the primary control button adjacent to the TouchPad or the mouse button without moving the TouchPad or mouse In the Windows operating system this refers to the TouchPad left control button or the left mouse button unless otherwise stated See also double click 224 sn color palette A set of specified colors that establishes the colors that can be displayed on the screen at a particular time compatibility The extent to which computers programs or devices can work together harmoniously using the same commands formats or language as another configuration 1 The collection of components that make up a single computer system 2 How parts of the system are set up that is configured controller A device that controls the transfer of data from a computer to a peripheral device and vice versa For example disk drives monitors keyboards and printers all require controllers CPU See central processing unit
171. system disk boot priority startup sequence The order in which the computer accesses its disk drives to locate the startup files Under the default startup sequence the computer looks for the startup files in the diskette drive before checking the hard disk wn 093 bus An electrical circuit that connects the central processing unit CPU with other parts of the computer such as the video adapter disk drives and ports It is the pathway through which data flows from one device to another See also bus speed frontside bus bus speed The speed at which the central processing unit CPU communicates with the other parts of the computer byte A sequence of eight bits A byte is the smallest addressable unit of data See also bit gigabyte kilobyte megabyte cache A section of very fast memory in which frequently used information is duplicated for quick access Accessing data from cache is faster than accessing it from the computer s main memory See also CPU cache LI cache L2 cache CD An individual compact disc See also CD ROM CD ROM compact disc read only memory A form of high capacity storage that uses laser optics instead of magnetic means for reading data See also CD Compare DVD ROM central processing unit CPU The chip that functions as the brain of the computer It takes information from outside sources such as memory or keyboard input processes the information and
172. t When I press the power button Set this option to Standby so that the computer will go into Standby mode when you press the power button When I close the lid Set this option to Standby so that the computer will go into Standby mode when you close the display panel When the system standby time has passed Set this option to Standby if you want the computer to automatically go into Standby mode when you haven t used it for a specified amount of time You can set the System standby time on the Power Save Mode tab 7 Click Override all Modes with settings here 1 48 Enhancing Productivity Using Standby The Set the range window appears Set the range Sample Set the range window with DC only option 8 Do one of the following Click DC only for the settings to apply only when you are using battery power Click All for the settings to apply whether you are using battery power or outlet power 9 Click OK to close the Full Power Properties window 10 Click OK to close the TOSHIBA Power Saver Properties window then close the Control Panel Starting again from Standby To start up the computer from Standby mode press and release the power button until the on off light changes to green The computer returns to the screen you were using If you put the computer in Standby mode by closing the display panel you can start the computer again by opening the display panel Chapter 7 Toshiba Utilities
173. ta with another computer To transfer a large amount of information between your notebook and another computer with a compatible infrared port you can use a special synchronization program 1 nan AeA UO N Place the computers so that their infrared ports are aligned Load the synchronization program on both computers Set any specific options Start the transfer When you have finished transferring files close the synchronization programs on both computers Transferring application files There may be instances when you will need to transfer application files from the Recovery CD that comes with your computer A CD ROM drive may not be a standard feature of your computer but you can transfer these files to your computer in the following ways hesa Use an external CD ROM drive You can order a PC Card CD ROM drive from Toshiba and install it in the PC Card slot on the left side of the computer Alternatively if you have a PC Card SCSI adapter you can use a SCSI CD ROM drive Connect to a network Enhancing Productivity 1 29 Exchanging data with another computer e You can access your Recovery CD by connecting your notebook to the office network You then can upload the files on the CD from another computer with a CD ROM drive onto a network server and download the files onto your notebook Use the infrared port to connect your notebook to another computer that has a CD ROM drive Setti
174. the production of optical discs such as CDs and DVDs Compare disk disk A round flat piece of material that can be magnetically influenced to hold information in digital form and used in the production of magnetic disks such as diskettes and hard disks Compare disc See also diskette hard disk disk drive The device that reads and writes information and programs on a diskette or hard disk It rotates the disk at high speed past one or more read write heads diskette A thin flexible disk in a protective jacket that stores magnetically encoded data Diskettes can be removed from the computer and come in two sizes 5 25 inch and 3 5 inch Your computer uses 3 5 inch diskettes See also double density diskette high density diskette document Any file created with an application and 1f saved to disk given a name by which it can be retrieved See also file double click To press and release the primary control button adjacent to the TouchPad or the mouse button rapidly twice without moving the TouchPad or mouse In the Windows operating system this refers to the TouchPad left control button or the left mouse button unless otherwise stated double density diskette A 3 5 inch diskette that can hold up to 720 KB of information half the capacity of a high density diskette See also diskette high density diskette download 1 In communications to receive a file from another computer through a modem o
175. the cover in a safe place so that you can retrieve them later 46 Getting Started Setting up your computer CAUTION Static electricity can damage the memory module Before you handle the module touch a grounded metal surface to discharge any static electricity you may have built up To avoid damaging the memory module be careful not to touch its gold connector bar on the side you insert into the computer Remove the new memory module from its antistatic packaging Holding the memory module by its edges so that the gold connector bar faces the slot fit the module into the socket Gently press down on the memory module connector until the clips snap into place Do not force the module into position The memory module should be level when secured in place 2a Inserting the memory module CAUTION Avoid touching the connectors on the memory module or on the computer Grease or dust on the connectors may cause memory access problems Getting Started 4f Setting up your computer 11 Replace the memory slot cover 12 Replace the screw and tighten it 13 Turn the computer over and reconnect any cables you removed Removing a memory module If you need to remove a memory module 1 Complete steps 1 7 in Installing a memory module on page 44 to shut down the computer and expose the memory module s 2 Pull the clips away from the memory module The memory module pops partiall
176. the same socket each card is not required to have its own address Hot swapping removing one PC Card and inserting another without turning the computer off fails Follow this procedure before you remove a PC Card 1 Double click the PC Card icon on the taskbar 2 Click Safely remove xxxx where xxxx is the identifier for your PC Card The operating system displays a message that you may safely remove the card 3 Remove the card from the slot The system does not recognize your PC Card Refer to the PC Card documentation Removing a malfunctioning card and reinstalling it can correct many problems A PC Card error occurs Reinsert the card to make sure it is properly connected lf Something Goes Wrong 1 O Resolving a hardware conflict If the card is attached to an external device check that the connection 1s secure Refer to the card s documentation which should contain a troubleshooting section Printer problems This section lists some of the most common printer problems The printer will not print Check that the printer is connected to a working power outlet turned on and ready on line Check that the printer has plenty of paper Some printers will not start printing when there are just two or three sheets of paper left in the tray Make sure the printer cable is firmly attached to the computer and the printer Run the printer s self test to check for any problem with the printer itself
177. ther programs 1 9 1 6 If Something Goes Wrong Problems that are easy to fix To close a program that has stopped responding 1 Press Ctrl Alt and Del simultaneously once The Windows Task Manager window appears Click the Applications tab If a program has stopped responding the words not responding appear beside its name in the list Select the program you want to close then click End Task Closing the failed program should allow you to continue working If it does not continue with step 5 Close the remaining programs one by one by selecting the program name then End Task To power off your computer do one of the following If you are not connected to a domain server 1 Click Start Turn off computer The Turn off computer window appears Click Turn Off The computer turns off If you are connected to a domain server 1 Click the Start button then Shut down The Shut Down window appears Select Shut down from the drop down list Click OK The computer shuts down completely Your program performs an illegal operation If you receive the message Your program has performed an illegal operation you should record the details of the message and consult the software manufacturer lf Something Goes Wrong 1 T Problems when you turn on the computer To record the details 1 Click the Details button and select the text the operating system displays The Details bu
178. tible PC Cards check the package to make sure they conform to the PCMCIA 2 1 standard or later Other cards may work with your computer but they are likely to be much more difficult to set up and use Expansion Options 1 1 3 Using PC Cards Inserting a PC Card Before inserting a PC Card read the documentation that came with the card to see if it has any special requirements HINT The operating system provides the Card and Socket Services software for your PC Card Even if your PC Card comes with its own version of Card and Socket Services you should use the files included in the operating system To insert a PC Card 1 Locate the PC Card slot on the left side of the computer 2 Insert the PC Card Inserting a PC Card 3 When the card is almost all the way into the slot push firmly but gently to ensure a firm connection with the computer Avoid forcing the card into position Removing a PC Card 1 Locate the PC Card eject tab 2 Push the eject button The eject button pops out from the slot 1 1 4 Expansion Options Using PC Cards 3 Push the eject button again so the card will pop out 4 Grasp the edges of the PC Card and slide it out of the slot Hot swapping PC Cards One of the great things about PC Cards is that you can replace one PC Card with another while the computer is on This is called hot swapping DEFINITION Hot swapping is the ability to change PC Cards while the c
179. tion 176 warning resume failure 178 Error checking 66 191 i ay Ethernet LAN Port disabling 127 using 127 exchanging data 128 expansion memory slot 45 external diskette drive 103 display devices 28 microphone 27 monitor 28 not working 190 external monitor connecting 104 F FAT File Allocation Table 191 files WAV 133 backing up 66 printing 73 restoring 76 saving 65 72 transferring application files 128 Fn key 31 assigning functions 150 151 Fn esse 150 Fn esse 149 assigning keys 150 151 change remove key assignments 153 drag and drop 151 keyboard 150 starting 150 using keyboard or pointing device 152 viewing key assignments 153 folders displaying information 124 function keys 31 68 238 e H hard disk drive light 35 password 167 169 hardware conflicts 181 resolving 183 headphones 132 jack 27 Help and Support Windows XP 181 Hibernation command 136 enabling 140 Hibernation mode 136 methods 142 143 144 145 hot key display brightness 215 display modes 215 display output settings 105 hibernation mode 214 instant password 168 keyboard 217 password security 210 power usage mode 212 Standby mode 213 volume mute 210 wireless device enable disable 216 wireless mode 216 hot keys power usage modes 95 hot swapping 114 peripherals 28 precautions 114 Hotkey utility 153 Hypertext Transfer Protocol HTTP 82 IBM 101 key enhanced keyboard 67 icons safety 23 indicator lig
180. to its previous mode Animproved help center support automation and automatic Windows operating system update Wizards to simplify setting up your home network Ability to share one Internet connection among multiple PCs An automatic discovery feature that allows your computer to detect new and intelligent devices 118 Enhancing Productivity 1 1 Q Personalizing your desktop Personalizing your desktop Your desktop is your virtual workspace This section explains how to customize its features for the way you like to work You can customize the following aspects of the desktop Taskbar which resources to display for quick access Web content interface what information from the Internet to always display Desktop style how windows are displayed and how to browse folders and files Toolbars what information appears at the top of each window Customizing the taskbar As you work the taskbar changes to reflect what you are doing Its icons provide shortcuts to programs documents files folders system features and components Open applications also have Forward and Backward buttons to allow navigation through folders documents and Web sites For example you can personalize the taskbar to include Quick Launch icons and also your favorite URL addresses or local folders and programs DEFINITION URL stands for Uniform Resource Locator which is the address that defines the route to a fil
181. top press the Toshiba tablet pen on the icon some applications may require you to press it twice two clicks To drag a screen to another location on the tablet press the Toshiba tablet pen on the screen s Title Bar and then hold it while you drag it to its new location When working in an application you can use the Toshiba tablet pen like a pen and simply draw or write directly onto the tablet s work space 112 Expansion Options Using PC Cards Returning the computer to its original configuration When you are finished using the tablet follow the steps below to return the computer to its original configuration 1 5 Return the Toshiba tablet pen to the slot at the edge of the display panel Press the display latch release button Lift the display panel to its upright position Rotate the display panel counter clockwise 180 When you complete this task the screen returns to its normal position facing the keyboard Flip the display latch toward the LCD screen Using PC Cards You may insert a Type II card into the computer s PC Card slot PC Cards are credit card sized expansion cards that greatly increase the capabilities of your computer Some PC Cards combine several functions Multifunction cards allow you to get the most out of your PC Card slot Most PC Cards conform to the PCMCIA Personal Computer Memory Card International Association standard TECHNICAL NOTE For PCMCIA compa
182. ts 1 through a USB port for any other hot pluggable port such as IEEE 1394 infrared and so on you do not need to use this wizard Click Cancel to close the wizard and then plug the printer s cable into Your Computer or point the printer toward your computer s infrared port and turn the printer on Windows will automatically install the printer for you To continue click Next i Cancel Sample Add Printer Wizard 3 Follow the on screen instructions to set up your printer TECHNICAL NOTE Some printers require a specific installation process In this case the Windo ws XP Professional Add Printer Wizard will display an error message If this happens refer to your printer installation guide for further instructions Getting Started 61 Powering off the computer Customizing your computer s settings There are several ways in which you can customize your computer to suit your particular requirements Refer to your operating system documentation or Help and Support for details You may also wish to customize your power usage settings For more information see Turning off the display automatically on page 96 There are additional custom settings you can choose See Toshiba Utilities on page 149 Powering off the computer It s a good idea to power off your computer when you are not using it for a while If you are using the computer for the first time leave the computer plugged into a
183. tton displays information that the software manufacturer needs to help you solve your problem 2 Press Ctrl and c simultaneously to copy the text to the clipboard 3 Open Notepad click Start point to All Programs then point to Accessories and click Notepad 4 Press Ctrl and v simultaneously to paste the details into Notepad 5 Add a paragraph break and type some notes describing what you were doing when you received the message 6 Save the file and refer to it when you contact the software manufacturer Problems when you turn on the computer These problems may occur when you turn on the power The computer will not start Make sure you attached the AC adapter and power cable properly or installed a charged battery Press and hold down the power button for a few seconds If you are using the AC adapter check that the wall outlet is working by plugging in another device such as a lamp The computer starts but when you press a key nothing happens You are probably in Standby mode and have a software or resource conflict When this happens turning the power on returns you to the problem instead of restarting the system To clear the condition press Ctrl Alt and Del simultaneously 1 18 lf Something Goes Wrong The Windows operating system is not working Clearing the condition may get the computer running but it won t solve a resource conflict Read the documentation that came with the conflicting devi
184. two conditions This device may not cause harmful interference This device must accept any interference received including interference that may cause undesired operation Contact Toshiba America Information Systems Inc 9740 Irvine Blvd Irvine CA 92618 1697 949 583 3000 Industry Canada Requirement This Class B digital apparatus complies with Canadian ICES 003 Cet appareil num rique de la classe B est conform a la norme NMB 003 du Canada FCC Requirements The following information is pursuant to FCC CFR 47 Part 68 and refers to internal modems Installation When you are ready to install or use the modem call your local telephone company and give them the following information The telephone number of the line to which you will connect the modem The FCC registration number of the modem The ringer equivalence number REN of the modem which is 0 6B The modem connects to the telephone line by means of a standard jack called the USOC RJ11C Type of Service Your modem is designed to be used on standard device telephone lines Connection to telephone company provided coin service central office implemented systems is prohibited Connection to party lines service is subject to State tariffs If you have any questions about your telephone line such as how many pieces of equipment you can connect to it the telephone company will provide this information upon request Telephone Compa
185. ul If you are uncertain of the policy that applies on the use of wireless devices in a specific organization or environment e g airports you are encouraged to ask for authorization to use the Wireless LAN device prior to turning on the equipment Regulatory Information The Toshiba Wireless LAN Mini PCI Card must be installed and used in strict accordance with the manufacturer s instructions as described in the user documentation that comes with the product This device complies with the following radio frequency and safety standards Canada Industry Canada IC This device complies with RSS 210 of Industry Canada Operation is subject to the following two conditions 1 this device may not cause interference and 2 this device must accept any interference including interference that may cause undesired operation of this device USA Federal Communications Commission FCC This device complies with Part 15 of FCC Rules Operation of the devices in a Wireless LAN System is subject to the following two conditions This device may not cause harmful interference This device must accept any interference that may cause undesired operation O Caution Exposure to Radio Frequency Radiation The radiated output power of the TOSHIBA Wireless LAN Mini PCI Card is far below the FCC radio frequency exposure limits Nevertheless the TOSHIBA Wireless LAN mini PCI Card shall be used in such a manner that the potential
186. upport window for that device appears For more information about Device Manager refer to Windows XP online help Memory card problems Incorrectly connected or faulty memory modules may cause errors that seem to be device related It 1s worthwhile checking for these first 1 2 Click Start Turn off computer Click Turn Off The operating system shuts down and turns off the computer automatically 1 86 lf Something Goes Wrong Resolving a hardware conflict 3 Remove the memory module following the instructions in Removing a memory module on page 47 4 Reinstall the memory module following the instructions in Installing a memory module on page 44 and making sure the module is seated properly Check for the error again If the error recurs remove the memory module entirely and check for the error again If removing the memory module eliminates the error the memory module may be faulty If the error recurs without the memory module installed the error is not caused by the memory module TECHNICAL NOTE You must have at least one memory module L installed for the computer to work f Power and the batteries Your computer receives its power through the AC adapter and power cable or from the system batteries battery optional high capacity battery and real time clock RTC battery Power problems are interrelated For example a faulty AC adapter or power cable will neither power the c
187. ured from the computer settings for each network that you use When you select a profile your network settings change To access this utility 1 Click Start point to All Programs Network Device Switch 3 2 Click Network Device Switch 3 The Network Device Switch dialog box appears noting that a profile has been created with your current network settings z Network Device Switch Main Selected Profile My Profile Profile was generated Profile List My Profile Network Device Switch i Following profile was crea My Profile About Profile Profile was generated Stay on the taskbar Sample network device switch screen Enhancing Productivity 1 31 Exchanging data with another computer 3 Click OK to close the dialog box Using Network Device Switch you can add a new network profile modify or view detailed information about a profile delete a profile or switch to different network profiles Using Bluetooth The following information applies to those systems with the optional Bluetooth wireless feature Bluetooth is a technology that expands wireless communication beyond networking equipment and can connect many different kinds of electronic devices without the need for cables Bluetooth uses the 2 4 GHz frequency band for wireless communications Bluetooth can transmit at data rates up to 1 Mbit sec The range through walls and floors of the wireless transmission is up to 1
188. uters and analog telephone lines motherboard The main circuit board in the computer It contains the processor memory and other primary components MS DOS prompt See system prompt multimedia A combination of two or more media such as sound animation and video in a computer program or presentation Musical Instrument Digital Interface See MIDI N network A collection of computers and associated devices that are connected by communications facilities A network allows you to share data and peripheral devices such as printers with other users and to exchange electronic mail non interlaced A method of refreshing a computer screen in which each pixel of every line is refreshed as the electron beam scans across and down the screen Compare interlaced non system disk A disk for storing programs and data that cannot be used to start the computer Compare system disk 0 online Available through the computer Online may refer to information being read from your own computer s hard disk such as online documentation or online help or to information coming from another company on a company network or the Internet operating system A set of programs that controls how the computer works Examples of operating systems are the Windows XP Professional and Windows XP Home operating systems P palette See color palette omen 031 parallel Processes that occur simultaneously In
189. utter door protects the slot 30 Finding Your Way Around Finding where everything is located PC Card eject button Allow easy removal of a PC Card R Modem port Lets you connect the computer s internal modem directly to a conventional telephone line Wireless antenna on off switch available only on Wi Fi or Bluetooth systems Lets you turn on a Wi Fior Bluetooth module on your system S SD card slot Lets you install and use an SD card SD indicator light glows when the SD slot is in use Front with the display panel open To view the front of the computer with the display panel open 1 Locate the display release button on the front of the computer 2 Press the button and lift the display panel 3 Adjust the display panel to a comfortable viewing angle CAUTION To avoid damaging the display panel be careful when opening and closing it Never force the panel beyond the point where it moves easily and never use it to lift the computer For information on your computer s tablet feature see Using your computer in tablet mode on page 58 Finding Your Way Around 31 Finding where everything is located Screen and tablet Toshiba tablet pen Enter menu button Up button button Power button lock Power button Keyboard indicator panel a EEA a VN yyy Ft Ao A TA Keyboard
190. web site at www pcsupport toshiba com Using the Ethernet LAN Port If your operating system is Windows XP Professional you can connect your computer to a Local Area Network LAN at work or from a remote location When your computer starts the Windows operating system attempts to contact a Dynamic Host Configuration Protocol DHCP server If the computer is not connected to a network it may pause a few minutes as it waits for a reply To avoid this delay you can configure the Windows operating system to disable the LAN port To disable the LAN port 1 Click Start and then click Control Panel 2 Click Performance and Maintenance 3 Click the System icon and select the Hardware tab then select the Device Manager button 4 Select Network Adapters then select the specific Network Adapter Right click the Adapter and click Disable Click Yes to confirm disabling the network card Your LAN port is now disabled Accessing a LAN To access a LAN o At the office you can connect the network Ethernet cable to the RJ45 jack on your computer 128 Enhancing Productivity Exchanging data with another computer e Your computer may be equipped for wireless communications If so see the next section on Exchanging data with another computer From home or while on the road you ll need a dial up connection Ask your network administrator for the telephone number to access the network Exchanging da
191. wed by others on their computer screens Internet news groups A news group is similar to a chat room but instead of using a dedicated site to converse about a specialized subject with others in real time it uses a Web site as a Learning the Basics 85 Toshiba s online resources clearinghouse where all the messages are placed like a gigantic bulletin board Online shopping Many Web sites offer products and services for sale Uploading and downloading files from the Internet Transferring files from one computer to another is termed uploading transferring data from your computer to a site on the Web or downloading transferring data from a site on the Web to your computer There are several ways to upload or download data It can be as simple as attaching a file or document to an email or you can use the File Transfer Protocol FTP features of your Web browser to transfer large amounts of data Toshiba s online resources Toshiba maintains a number of online sites to which you can connect These sites provide information about Toshiba products give help with technical questions and keep you up to date with future upgrades For more information see Contacting Toshiba on page 204 Chapter 4 Mobile Computing This chapter covers all aspects of using your computer while traveling Toshiba s energy saver design Your computer enters a low power standby mode when it is not being used there
192. when you press the power button or close the display panel you must preset the mode 1 Click Start Control Panel The Control Panel window appears Click Performance and Maintenance Double click the Toshiba Power Saver icon The TOSHIBA Power Saver Properties window appears l TOSHIBA Power Saver Properties Power Save Modes Hibernate The Power Save Modes are a series of settings for power management You can change which mode your computer is using change the settings for each mode or create custom modes 8 Plugged in ia a Power source Create copy AC power Battery remaining 100 Life on Standby 101 hours Life on Hibernation 26 days Create copy a Super Long Life ZZ lt Mm gt Details About V Show Power Saver Properties icon on the taskbar TOSHIBA Cancel Sample TOSHIBA Power Saver Properties window 4 Click Details in the Plugged in section The Full Power Properties window appears 5 Click the System Power Mode tab Enhancing Productivity 1 4f Using Standby Full Power Properties General Power Save Mode System Power Mode Device Settings 4 gt These settings control system standby properties Override all Modes with settings here B When press the power button Standby v A hen close the jd F Prompt for password when computer goes off Standby or Hibernation OK Cancel Apply Sample Full Power Properties window 6 Select Standby for the options you wan
193. with the ISP s computer If you are using your computer at the office then you probably connect to the Internet through your company s network See your network administrator about connecting to the Internet 8 4 Learning the Basics An overview of using the Internet Surfing the Internet Once connected to the Internet the Web browser displays a home page for example your ISP s home page on the Internet or your company s Web site home page To visit a desired Web site type in the Web address The Web address or Uniform Resource Locator URL is a unique identifier for that computer system linked to the Internet Web addresses can also appear within a Web page s text and are known as links Clicking a link automatically displays the site on your Web browser You can also use a Search Engine a Web site specifically designed to help you look for information Internet features The Internet offers many types of communication tools to help you perform many tasks Internet email To send and receive email of your own you need a mailbox on the Web or an email address If you have an account with an ISP you can probably set up an email address at the same time as you sign up for the service Internet chat rooms A chat room is a Web site that offers a place where people with similar interests and ideas can communicate in real time one on one or in groups by typing messages which are instantly vie
194. ws when the cursor control overlay is on Once the cursor control overlay is on To Procedure Type lowercase Press and hold down Fn while you letters type the letters Type uppercase Press Fn and Shift simultaneously letters while you type the letters Use the numeric Press and hold down Shift while you keys use the overlay keys then release Shift to return to the cursor control overlay To turn off the cursor control overlay hold down the Fn key and press F10 again The cursor control mode light on the keyboard indicator panel goes out Starting a program The easiest way to start a program is to double click the name of the file that contains the information you want to work on To find the file use My Computer or Windows Explorer If you prefer to open the program first you have the following options Double click the icon for the program on your desktop 2 Learning the Basics Saving your work Use the Start menu Use Windows Explorer to locate the program file Use the Run dialog box For more information see Help and Support in the Start menu Saving your work Before you turn off the computer save your work to the hard disk drive or a diskette NOTE Always save your data even when you are using the Stand by command If your battery fully discharges your information will be lost Your computer can be configured to warn you when the battery is running low see Using battery alarms
195. y out of the slot Pulling the clips away from the memory module 3 Carefully remove the module from the slot 4 Replace the memory slot cover and the screw 5 Restart the computer 4 8 Getting Started Setting up your computer Connecting an external USB mouse You may want to use a mouse instead of the TouchPad the computer s built in pointing device You can attach an external mouse to one of the computer s USB ports provided the mouse is USB compatible To connect the mouse to your computer plug its cable into one of the USB ports You can connect it while the computer is on The operating system automatically detects the mouse The mouse and TouchPad can be used at the same time Connecting an external USB keyboard You can attach an external standard keyboard to a USB port on your computer provided the keyboard is USB compatible yw NOTE The emulation Fn key is not supported when using a USB E keyboard Connecting a printer You can connect a local USB printer to your computer If the printer has a USB interface you can connect it directly to the computer You also need a USB cable which may come with your printer You can purchase one from a computer or electronics store Connecting a USB printer 1 Connect the flat end of the USB cable to the USB port 2 Connect the other end of the USB cable to the printer 3 Connect the printer s power cable to a power outlet and turn on the printer
196. y pack 00000000000000 Battery pack Lets you to use your computer when a standard electrical outlet is not available For further information about using the battery see Mobile Computing on page 86 Expansion memory cover Covers the expansion memory slot 3 4 Finding Your Way Around Indicator panels Indicator panels Two sets of indicator panels the system indicator panel and the keyboard indicator panel display the current state of your system System indicator panel This panel is located on the top leading edge of the display 000e B AC power light Glows green when the computer is connected to an AC power source On off light Indicates whether the computer is on off or in QO a low power standby mode Glows green when the computer is on gt h Sd Flashes amber when you power down the computer using the Standby command May flash amber if the computer is overheating Battery light Indicates the status of the battery gt h S Flashes amber when you are running on battery power and the battery charge is running low Is off when you are running on battery power and the battery charge is not running low gt Glows amber when you are connected to AC power and the battery is charging gt h Sd Glows green when you are connected to AC power and the battery is fully charged For more information see Monitoring

Toshiba 3500 Personal Computer User Manual

Contents

Download Pdf Manuals

Related Search

Related Contents