Topfield TF4000Fe Satellite TV System User Manual
Contents
1. Change OSD Transparency Changes Transparency E Previous Menu Adjust the OSD transparency of all the menus The available levels are ranging from 0 to 50 Info Box Display Time Adjust the time out of the Info Box Set the period of time that the Info Box is displayed on screen The adjustable time is 0 to 30 seconds No info box and Never Hide Info Box Position Adjust the position of the Info Box It allows you to change the position by using gt buttons 20 MENU OPERATIONS Organizing Services This mode can be used to rename reorder lock hide and delete TV Services Organizing Services Browse Rename Move Lock Skip Delete Sort Renames Rearranges Locks Skips Deletes specific Services 1 Moves to another function Moves to Service List GE Previous Menu Moves to Ch List Service A Browse Press button Now browsing through the Organizing Services is possible Press assigned buttons on the help message B Rename Use Nw buttons to select Rename item and press button to move the cursor to the Service List Press button to display keyboard and rename the service After renaming it be sure to save it by pressing button at Save item C Move You can reorder and move the service to the preferred position Mark the desired service to move and press button Use buttons to choose the Move mode D Lock You can restrain an2. Transfer Data to Other IRD Firmware Upgrade IRD Status Information Calendar ExBlock Game BricksLay mh Bomb Hexa Satellite Name r Frequency Symbol Rate g Polarization PID Start r System ID Loader Version Device Version F Application Version Last Update 42 SPECIFICATIONS SPECIFICATIONS Tuner amp Channel Decoder Input Loop through Connector F type IEC 169 24 Female Frequency Range 950 2150MHz Signal Level Input 65 25dBm LNB Power amp Polarization Vertical 13 5VDC Horizontal 18VDC Current Max 500mA with Overload Protection 22KHz Tone Frequency 22 1KHz Amplitude 0 65 0 2V DiSEqC Control Version 1 0 1 1 1 2 1 3 Compatible Demodulation QPSK Input Symbol Rate 1 45 Msps Code Rate 1 2 2 3 3 4 5 6 and 7 8 MPEG Transport Stream A V Decoding Transport Stream ISO IEC 13818 1 MPEG 2 Transport stream Specification Profile Level MPEG 2 MP ML Aspect Ratio 4 3 16 9 Pan amp scan Letterbox Video Resolution 720 x 576 Audio Decoding MPEG 1 Layer 1 amp 2 Main System Main Processor Power PC Data In Out Video CVBS output RCA A V Audio L R output SCART M CVBS S VIDEO RGB YUV output Audio L R output RS 232C 9 pin D sub type Transfer rate max 115 2Kbps RF Modulator RF Connecto
3. SEHE DV3 pu UNIVERSAL SATELLITES Digital Video DIRE AUTOMATIC LOCATION SYSTEM Broadcasting The Users Manual Digital Satellite Receiver TF4000Fe TF5000Fe Please read this User s Manual carefully The menu structure and specification can be changed without notice TABLE OF CONTENTS TABLE OF CONTENTS INTRODUCTION 5 CONTENTS 5 FEATURES 6 REMOTE CONTROL UNIT RCU n9 INSTALLATION 11 Connection to TV VCR and 0 464000 0 1 11 Connection to the other Satellite Receiver 12 GETTING STARTED iie ied ee eror e ent le dere teer eere dte rode Siete e eros 12 MENU OPERATIONS oic yt vna Dn eene ere e ERE c d na nete 13 System Seltlhng Ue HER Pd Tuus tae 14 Local Time Setting iv iui Ie acre tae e ei esee ee dert da 14 VCR Timer Setting eiii ete et rte en endete de Pre reno cg 15 Parental eee rU ages bo eevee edad ee 16 language Setting een ttem sce p ode agr 17 AIM Output Setting cde dete 19 OSD Transpatengy eret eee ree eet Eee ud 20 Info Box Display Time uet ceci ac enc ene te tint eer ez aperta 20 Into Box POSIEIOD eiit emo fa re Tee eere o afe ite be ine cos 20 Organizing Services TTT 21 Organizing Favorites nitr
4. J Service Search It is used to go to Channel Search menu directly from SAT TP Edit menu Factory Setting Installation LNB Setting Motorized DiSEq USALS Setting SATI TP Edit Reset All Data Factory Setting System Recovery No Transfer Program Transfer Data to c Firmware Upgrade Resets all stored data Moves Item D Reset all data E Previous Menu the stored data can be reset just like it was manufactured The factory setting has two steps The first is to reset the service data and other system configurations except 31 MENU OPERATIONS Motorized DiSEqC1 2 setting The second is to reset the parameters of Motorized DiSEqC 1 2 System Recovery All the data and system setting can be stored and restored Recover It recovers all the stored data and system setting The factory default setting will be reloaded unless the installer stores the data and system setting by Store function Store It stores all the data and system setting as current setting The stored data and seting will be restored by Recover function It is permitted only to the installers The PIN code is different from that of users Transfer Program to Other IRD It is used to transfer STB firmware to other STB for upgrading the STB Notes Please proceed this menu with connecting the STB of same model and same specification Transfer Data to Other IRD It is used to transfer STB Data such as service
5. Configurations concerning Audio and Video can be made here A TV Type Select your TV standard For automatic PAL NTSC selection set it to Multi B Video Output Select the mode of Video output among RGB S Video YUV and CVBS on TV SCART by using 4 buttons C TV Aspect Ratio Select your TV screen format Select 4 3 or 16 9 mode by using lt 4 gt buttons D Display Format If you have a TV set with the 4 3 picture format and transmission is in 16 9 you can select the display format Select the Letter Box or Center extract by using 4 j buttons E Sound Mode It allows you to configure the sound mode Select the Stereo Mono Left and Right mode by using buttons The Sound mode is configurable later on by using button on your RCU F RF Output When the STB is connected to the TV by an RF cable you may need to select the correct TV standard system Select the PAL PAL 1 PAL NTSC M mode by using gt buttons G RF Channel Select a UHF channel by using gt buttons The default UHF channel is CH36 When you change the UHF channel number you must also change to the same value on the TV If you do not there will be no picture and sound 19 MENU OPERATIONS OSD Transparency System Setting Local Time Setting Setting Parental Control Language Setting Output Setting OSD Transparency Info Box Display Time 4Sec Info Box Position
6. Motorized DiSEqC1 2 Satellite Name Asiasat2 C 3640 27850 H LNB Setting Motorized DiSEqC1 2 g Level Select the satellite of the dish Press OK to see the list 1 Move Item oq Selects Item z Previous Menu If you have DiSEqC 1 2 motorized system then you can use the DiSEqC 1 2 functions A Satellite Name Select a satellite name that will be used to identify a motor position B Frequency Select the transponder to catch the strong signal Select the TP from TP list box to get the strong signal C LNB Setting Please refer to LNB setting of this chapter D Motorized DiSEqC1 2 Select Enable or Disable If you are using DiSEqC1 2 antenna set to Enable E DiSEqC Command Mode Change the current mode between User and Installer modes User This mode is used to fine tune the position of the motor for better reception Installer This mode is used to search for the position of a satellite manually F Movement In case of User mode the movement is adjustable by fine tuning In case of Installer mode the movement is adjustable by East West going command 27 MENU OPERATIONS G Motor Control Goto Move the motor to the stored position of the selected satellite Store Store the current position of the motor for the selected satellite The followings are available only at the Installer mode Recalculate Recalculate the position of the Stab Rotor mot
7. TO THE SATELLITE DISH LNB Disconnect the STB from the mains before connecting or disconnecting the cable from the satellite dish Failure to do so can damage the LNB SERVICING Do not attempt to service this product by yourself Do not remove the cover Refer all serving to qualified service agents LIGHTNING For protection we recommend that you connect the STB via an external surge protection device Disconnect the antenna cable from STB during lighting storms EARTHING The antenna cable must be earthed LOCATION Locate the STB indoor place properly to prevent lightening raining and direct sunlight Do not allow the STB to be exposed to hot cold or humid conditions INTRODUCTION INTRODUCTION Thank you for purchasing the STB This STB is fully compliant with the international DVB standard and thus transmits digital images sounds information guides and teletext directly to your TV through the satellite broadcasting Now you can comfortably see and receive digitally transmitted music news movie and sports satellite broadcasts in your office or at your home The STB records and plays back satellite broadcasts You can enjoy interesting games embedded in STB In the Service Search section both the automatic channel search method and the manual search mode are provided Also it supports DiSEqC 1 0 1 1 1 2 and USALS DISEqC 1 3 enabling you to move your antenna in order to focus preferred satellite You can save up to 35
8. TV 08 03 Wed 11 39 30Min 07 02 Mon 13 00 60Min WL Service Number Reseved Date and Time to Start playing Service Name Duration 15 MENU OPERATIONS To insert new entry of Timer Setting press Red Button Press button to edit the entry and press Green button to delete the selected entry Type Select TV or Radio by pressing lt button Satellite Press button to display the satellite list Select a satellite that includes the service to be played Service Select the service to be reserved for recording by pressing button Mode By using 4 gt buttons select one among One Time Everyday Every Weekend Weekly and Every Weekday Date Select the recording start date by pressing lt buttons Wakeup Time Select the wakeup time buttons and BEI buttons are available Duration Select the recording duration by pressing lt gt buttons OK To confirm the setting for the reserved recording press button Parental Control Parental Control No block Change PIN Code Enter PIN code Sets the age limit to restriet the viewing of certain programs 4 Selects Item E Previous Menu Password to various menus can be configured The PIN Code box will automatically appear when this menu is selected The default PIN Code is 0000 A Censorship The Censorship item blocks programs according to each speci
9. 00 TV and 1500 Radio channels and work around with the Favorite Lock Delete Move and Sort functions The menu is very modern and supports multiple languages All functions can be carried out using the remote control and some of the functions can also be carried out using the front panel The STB is easy to use and adaptable for future advances Please be aware that new software may change the functions of the STB If you have any difficulties concerning the operation of your STB please refer to the relevant section of this manual including the Troubleshooting This Manual will provide you with useful information on using the STB CONTENTS Please ensure that the following items are included with the STB 1 Remote control unit 2 Batteries size AAA 3 User s Guide this document FEATURES FEATURES Fully Compliant with DVB MPEG 2 Digital and fully DVB compliant 22KHz On Off Automatic FEC detection Automatic Service Search DiSEqC 1 0 1 1 1 2 USALS DISEQqC 1 3 5000 services TV and Radio programmable Service switching time less than 1 second Service list editing Favorite service list editing 30 favorite service groups support Automatic and Manual PAL NTSC selection Multilingual Audio support 256 color On screen Display OSD Multilingual menu text support GMT and Time Offset support Full Picture In Graphic PIG function Electronic Program Guide fo
10. LS items according to your antenna LNB and satellite settings If the right Satellite Name and LNB Frequency were not found in the list call the dealer for satellite information Then press button at Service Search item and go to the Service Search menu Set the Search Mode to the Auto Manual Advanced or SMATV Search Select the Start Search item and press button The search procedure will take a while Press button when the searching process is finished to confirm and save the new service list For further information please refer to the LNB Setting part of MENU OPERATIONS in this manual 12 MENU OPERATIONS MENU OPERATIONS Now this chapter assumes that the STB system has been installed correctly meaning The satellite dish for the STB has been installed connected to the STB and correctly adjusted to the proper satellite The STB is connected to the TV The RCU has batteries and ready to control the STB If the STB has not been installed or connected properly please refer to the INSTALLATION menu on this manual Many of the functions of the STB are available from the Main Menu Press button to open it Main Menu System Setting System Setting t Moves Item Selects Item Exit 13 MENU OPERATIONS System Setting System Setting OSD Transparency Info Box Display Time CE Info Box Position Sets local time automatically or manu
11. SCORE 00035600 Bomb 35 FUNCTION GUIDE FUNCTION GUIDE Service List TV Services 55 Ch 409 AS33 34 AS3 56 Ch 410 AS37 38 AS3 Retuers WNS Wtv a 65 60 RAL Inter al 64 EDTV Asiasat 2 C 4000H 28125 Help Normal Sorting 5 Alphabetic Search Satellite List Satellite Press button to see the Service List and Help window will be displayed Select one of the services you want to enjoy By pressing BEN button instead of button satellite selection window will appear You can select a satellite there Sorting alphabetic search and selecting a channel by satellite is possible Information Box Press 4 button the RCU to see the program information The Information box displays as follows Service Number Service Name Detailed Program Information Signal Level and Quality Satellite Information 36 4000MHz 60 RAI International FUNCTION GUIDE Information of subtitle and or teletext Parental Lock You can hide the Information Box by pressing button Service Name Freq Signal Strength Serice Time CAS Parental Event Name Subtitle Lock Number Information Teletext Mark Event Description Start Time End Time Dolby Multifeed You can see the Current Next event by pressing 4 button in the inf
12. ally 1 Moves Item Selects Item lt Previous Menu Local Time Setting The exact local current time can be adjusted by using the GMT the Time Offset and the Mode sub menus Local Time Setting lt gt 01 01 2004 03 39 Sets the local time t Moves Item Selects Item E Previous Menu A Mode By using 4 gt buttons you can select on of the Auto Manual mode The Auto mode updates the time settings automatically by the GMT received from the broadcast and the Time Offset you have inserted The Auto mode is recommended B Local Time 14 MENU OPERATIONS The Local Time is adjustable only when the Mode is in the Manual mode Adjust the current time if necessary by using the numeric buttons and gt buttons C GMT GMT is referred to the standard time of Greenwich It cannot be changed D Time Offset The current time of the local area can be inserted In another words insert the time difference of the local time zone from the GMT For example if the local area is Seoul the time difference from the GMT is 9 insert 9 00 The time is adjustable by using buttons 15 minutes at a time VCR Timer Setting VCR Timer Setting New Entry U US nnn pand Asiasat 2 C Servi 60 RAI International One Time 4101 2004 Thu 00 45 30 Min 1 Next Prev entry Edit entry Insert new entry Delete the selected entry FASHION
13. arch To go to Service Search menu directly from LNB Setting menu press button at this item 24 MENU OPERATIONS Service Search Service Search Satellite LL Search Mode lt gt Auto Network Search FTA Scrambled FTA CAS Start Search Te Select the scanning mode t Moves Selects Item E Previous Menu A Satellite Name Press button to display the Satellite List Box The list of Satellite is put in alphabetical order Select one of the preprogrammed satellites that correspond to the direction of the antenna If the desired satellite name is not in the list then select Other B Search Mode There are 4 search modes There are 4 search modes Auto Manual Advanced and SMATV The Auto mode enables you to search using the information the STB has On the other hand you may need to know in advance the frequencies and the symbol rates before using the Manual mode On the Advanced mode enter the Audio PID Video PID or the PCR PID The SMATV mode is used to special purposes on satellite master antenna TV system C Frequency Select or enter the Transponder s Frequency by using the numeric buttons on your RCU D Symbol Rate Enter the Transponder s Symbol Rate by using the numeric buttons on your RCU E Polarization Choose the type of polarization either the Horizontal or the Vertical F Network Search 25 MENU OPERATIONS This Network Search
14. aster supports teletext you can see symbol in the Information Box There are VBI insertion mode and software emulation mode in teletext In the VBI insertion mode which is always on you can watch the teletext with your TV using the RCU of your TV To watch teletext with VBI insertion your TV must support teletext In the software emulation mode you can watch the teletext even though your TV does not support teletext You can watch the teletext using the RCU of STB Press Teletext ME button to watch the teletext with software emulation mode Press button once more or EXIT button to escape from teletext Sound Track You can choose a language of soundtrack by pressing button when a broadcaster supports various languages of soundtrack Also it is possible to choose a mode among Stereo Mono Left and Right using lt buttons button is used for multifeed function too If the multifeed is available in current service Multifeed Track will be displayed first You can change the display to Sound Track selection menu by pressing button once more Sound Mode Multifeed If multifeed is available in the service Multifeed Icon will appear at the right side of the Information box If available the Multifeed Track and Sound Track are toggled by button It is possible to choose one of the multifeed services 38 SOFTWARE UPGRADE AND PC INTERFACE SOFTWARE UPGRADE AND PC INTERFACE Software Upgra
15. ate deze e eed ein eee ed dc 22 Installation ESRB 23 ENB Setting i See obe tien A 23 Service Sedarcli anaa HSR 25 Motorized DiSEQqC 1 2 27 USALS TT P 28 E esi Here E tier ee ae 30 Factory Setting iiem e MID D e tuia s oM EDS 31 System RECOVERY e EE HAERES 32 Transfer Program to 32 Transfer Data to 32 Firmware Upgrades iter T 33 lntormatlon Ioue tie e GERE d ye dese RR 34 TABLE OF CONTENTS Subtitle ent 38 Teletext ERE 38 SOUNG Track 38 MUultifC iiec ette a usce tote Dein oo e bed e Dai 38 SOFTWARE UPGRADE AND PC INTERFACE 39 Software Upgrade 4 niii erp 39 ENU MAP NM E 40 SPECIFICATIONS ode DR ESI eM 43 CAUTION RISK ELECTRIC SHOCK DO NOT OPEN This symbol indicates dangerous voltage This symbol indicates inside the product that presents a risk of TAX important instructions electric shock or personal injury accompanying the product CAUTION TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE Warn
16. d lock the services From here locking and later unlocking services in any of the lists is possible e g in order to prevent children from watching it If a locked service is selected you should enter the PIN code in order to enjoy it E Skip You can hide and skip the services In order to unlock the skip function press button on the skipped service The skipped services will not be visible on the service list 21 MENU OPERATIONS F Delete Press button to delete services The delete function differs from the skip function as it deletes the service completely Whereas the skip function just makes the service invisible NOTE Deleted services are permanently deleted The only way to recover them is to perform a new service search G Sort You can sort and rearrange the service list Organizing Favorites Organizing Favorites E Fav List TV Service List News Sport Movie Music AAA NEW Select the favorite services in the service list 1 Moves Cursor 6 Moves Cursor to fav Services or Service List E Previous Menu 9 Changes name Delete This mode is helpful in adding and deleting services to and from the favorite group Under the menu Organizing Favorites there are three different modes Fav List Fav Services and TV or Radio Services List On the Fav List mode four standard lists are selected as the default menus News Sports Movie and Music Up to 30 lists including these l
17. de The STB has stable and convenience software to use But to improve the STB the new software of the STB may be released Whenever a problem is found or functions are added or modified the software in the STB has to be upgraded to enjoy better function The latest news software utility driver product and manual will be found at Topfield website http www topfield co kr There are some methods to download the new software The configuration of the RS232 cable is as follows PC pin 2 STB pin3 PC pin 3 STB pin2 PC pin 5 STB pin5 The other pins do not need care 5 to 5 download 5232 It is possible to download the firmware or service data from STB to another STB b PC to STB download via RS232C You need the TFD down exe to download the software To start download start download at PC and turn on the STB c OTA You can download the latest STB software from Satellite by OTA The satellite and TP can be added or changed You can get the information at www topfield co kr For more information refer to the transfer firmware chapter of Menu Operations 39 MENU MAP Mode Local Time Setting 45 al Tite Time Offset Type Satellite Service Insert New Entry Mode Day WakeupTime Duration Type VCR Timer Setting Satellite Service Edit the Selected Entry Mode Day WakeupTime Duration System Setting Delete the Selected Entry Censorship Change PIN Code Parental Control Time Setting Lan
18. e It means the longitude of your location You can select the angle East and West by K or numeric button E My Latitude It means the latitude of your location You can select the angle South or North by lt or numeric button F Reference Position Go to Reference position 022 G Move After searching the position you want by Goto the position item you can tune the antenna to go to the exact position by this item button moves the antenna to anti clockwise and clockwise respectively H Frequency Selects the Transponder to catch the strong signal Goto the position After setting the Longitude Latitude and the longitude of the selected satellite this menu is used when you want to move the desired direction position of the dish saved before moving limit is 65 29 MENU OPERATIONS SAT TP Edit SAT TP Edit Satellite Name Frequency Symbol Rate 27850 KS s Polarization SAT Name Edit Add new TP Delete TP Add Satellite Delete Satellite 00 Level Select the satellite name of the dish Press OK to see the list 1 Moves Selects Item cam Previous Menu A Satellite Name By pressing button you can see the listed satellite names Then using 4 or buttons you can select satellite B Frequency By pressing button you see the all frequencies of transponders of a satellite and can select a freq
19. fic setting Use 4 buttons to select the items below No Block Access to everyone 16 MENU OPERATIONS Total Block Access to no one without PIN code If the service is limitation free the block function will not work 4 18 Inaccessible for viewers within each minimum age limit if a maturing rating of the event is same or lower than the age limit In case of inaccessible the STB asks the PIN Code and check the age limit If the service is limitation free the block function will not work B Change PIN Code Go to the Change PIN Code item to configure new PIN Code Press button then a box will appear on the screen Enter the PIN code by using the numeric buttons on your RCU C Access Control Access Control Time setting Language Setting AN Output Setting Organizing Services Organizing Favorites Installation IRD Lock Locks or Unlocks Installation menu 1 Moves Item Selects Item Previous Menu The Access Control menu controls access to following items Time Setting Language Setting A V Output Setting Organizing Services Organizing Favorites Installation and IRD Lock Press 4 gt buttons to Locked Unlocked the access Locked means controlling the access to the specific menus with the PIN Code system The default PIN Code is 0000 Language Setting There are many languages available for the menu 17 MENU OPERATIONS A Menu Language It is an item for cha
20. guage Setting Output Setting Access Control Organizing Services Organizing Favorites Installation IRD Lock Menu Language Language Setting Subtitle Language Audio Language TV Type Video Output AIV Output Setting TV Aspect Ratio Display Format Sound Mode RF Output RF Channel MENU MAP OSD Transparency Info Box Display Time Info Box Position Browse Rename Move Lock Skip Delete Sort Add Favorite Group Edit Service Organizing Services Organizing Favorites LNB Setting Service Search Installation Motorized DiSEqC1 2 USALS Setting 6 per peti 25 rus ensi ob pud Satellite Name LNB Frequency LNB Power 22Khz DiSEqC 1 1 DiSEqC 1 0 Service Search Satellite Name Search Mode Frequency Symbol Rate Polarization Network Search PID FTA Scrambled Start Search LNB Setting Satellite Name Frequency LNB Setting Motorized DiSEqC 1 2 DiSEqC Command Mode Movement Motor Control Service Search Motorized DiSEqC 1 3 Satellite Name Satellite Angle 1 MENU MAP USALS Setting Installation SAT TP Edit Factory Setting System Recovery My Longitude My Latitude Reference Position Move Frequency Goto the position m Satellite Name F Frequency Symbol Rate Polarization SAT Name Edit Add new r Delete TP F Add Satellite F Delete Satellite Service Search p Recover Store Transfer Program to Other IRD
21. information to other STB for upgrading the STB Notes Please proceed this menu with connecting the STB of same model and same specification 32 MENU OPERATIONS Firmware Upgrade Frimware Upgrade 27850 KS s SS 5 00 Level 1 00 Quality Select the Satellite name for OTA Moves Selects zx Previous Menu At this menu you can download the latest STB software from Satellite The TP details are as bellows Astra Hotbird 4 FREQUENCY 12603 MHz FREQUENCY 12673 MHz S R 22000 KS s S R 27500 KS s Polarity Horizontal Polarity Vertical PID 347 PID 730 For OTA Over The Air Upgrade it takes around several minutes to download software from the Satellite To start OTA press button at Start item For better service the satellite and TP can be added or changed You can get the information at www topfield co kr 33 MENU OPERATIONS Information You can check the IRD STB version and refer the calendar IRD Status IRD Status Check the STB s system information here It shows System ID Loader Version Device Version Application Version and Last Update Calendar Press 4 or gt button to select the year Press orxgz button to select the month Calender P P Next Previous month Next Previous year 34 MENU OPERATIONS Game
22. ing Please do not insert metal or alien substance into the slots for the Modules and Cards In doing so can cause damage to the STB and reduce its life span WARNING Please read the following recommended safety precautions carefully for your safety MAINS SUPPLY 90 250V AC 50 60 Hz OVERLOADING Do not overload wall outlets extension cords or adapters as these can result in fire or electrical shock LIQUIDS Keep liquids away from the STB The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids such as vases shall be placed on the apparatus FLAME SOURCES Do not place naked flame sources such as lighted candles on the STB or near the STB SMALL OBJECTS Coins or other small objects must be kept away from the STB as they can fall through the ventilation slots of the STB and cause serious damage CLEANING Disconnect the STB from the wall socket before cleaning it Use a dry cloth lightly dampened no solvents to clean the exterior of the STB VENTILATION Do not block the STB s ventilation slots Ensure that a free airflow is maintained around the STB Never stand the STB on soft furnishings or carpets Do not use or store the STB where it is exposed to direct sunlight or near a heater Never stack other electronic equipment on top of the STB ATTACHMENTS Do not use any attachments that are not recommended as these may cause hazards or damage the equipment CONNECTION
23. ists can be added and renamed When deleting a service select a service in the Fav Services section and press the assigned button on the help message To add services into Favorites locate the cursor to the desired service in Services List and press button To delete a service from Favorites locate the cursor to the service in Fav Services and press button 22 MENU OPERATIONS Installation LNB Setting The Low Noise Block down Converter LNB amplifies the signal received by the satellite dish and lowers the frequency of the signal The signal is then fed from the LNB at the dish via cable to the STB For the LNB Setting move the cursor to Installation item and press button Then move the cursor to the LNB Setting item and press button A Satellite Name Press button to display the Satellite List The list of Satellite is put in alphabetical order Select one of the preprogrammed satellites that corresponds to the direction of the antenna If the desired satellite name is not in the list then select Other B LNB Frequency Select the L O Frequency of the LNB The LNB Frequency of 5150 9750 10600 10750 11250 11475 9750 10600 9750 10700 or 9750 10750 can be selected by lt gt button Also you can insert LNB frequency by using Numeric key on the RCU E LNB Power Select LNB power On to output the LNB voltage F 22 KHz If you are using a 22 KHz tone switch box make 22 KHz tone switch enable or disable to
24. item can be used if the Search mode is set to Manual or Auto If the Network Search item is set to On and the NIT Network Information Table is available the Transponder s information can be found G PID This item is valid when the Search Mode is set to Advanced only Press button to enter Video Audio and PCR PID s 1 Video PID Insert the Video PID by using the numeric buttons on your RCU 2 Audio PID Insert the Audio PID by using the numeric buttons on your RCU 3 PCR PID Insert the PCR PID by using the numeric buttons on your RCU 4 SAVE To ensure the above Video Audio and PCR PID change press button at this item H FTA Scrambled Choose your favorable services you want to search among FTA only CAS only and FTA CAS Start Search To start the searching process press button at this item To stop the searching process on the way press either the button or the button This menu will be shown as long as the STB is searching for services All services found will be listed in two columns on the screen with TV services in one column and Radio services in the other Please note that the search procedure may take a few minutes When the search procedure is completed the screen will show how many TV and Radio services have been found Press button to save the services J LNB Setting To go to LNB Setting menu directly from Service Search menu press button at this item 26 MENU OPERATIONS Motorized DiSEqC 1 2
25. lection window Select the subtitle language in the list 17 FAV Button Display the favorite service list 18 Button Red 28 Button Green Button Yellow Button Blue These buttons are function key So the function in each OSD Screen be referred in each instruction message in help window 19 UHF Button zu Display and alter the UHF setting in menu 20 SLEEP Button 8 Display the sleep time At the sleep time the power is automatically turned OFF and the STB goes to the STANDBY mode 21 TELETEXT Button Enable the teletext with software emulation 22 SAT Button 1 Display service list by satellite 23 Button Reserved 10 INSTALLATION Connection INSTALLATION Connection First connect both the satellite antenna and the TV to the STB There are some of the most common ways to connect the equipment in this manual There are several ways of connecting the STB to the existing Audio TV system We recommend one of the following setup If you have problems with your connections and need help contact your dealer or service provider Connection to TV VCR and Hi Fi 1 Connection to the TV with the SCART Cable Connect one end of the SCART cable to the TV SCART socket on the STB and the other end to a SCART socket on the TV 2 Connection to the TV with the CINCH Cable Connect one end 3 co
26. nging the language of the Main menu Select the language that the menus will be shown in English French Deutsch Italian Spanish Arabic Greek Turkish Danish Swedish Norwegian Dutch Russian Polish Persian The supported language can be changed without any notice B Subtitle Language It is an item for changing the language of the subtitle As long as the services support it the subtitle language is changeable by pressing BIEN button on your RCU Language Setting Menu Language Subitile Language lt gt Danish Audio Language Changes the Subitile language 1 Moves Selects Item XE Previous Menu English French Deutsch Italian Spanish Arabic Greek Turkish Danish Swedish Norwegian Dutch Russian Polish Persian Disable The supported language can be changed without any notice C Audio Language It is an item for changing the language of the Audio If more than one audio language is transmitted you may select one language among the languages transmitted by pressing button English French Deutsch Italian Spanish Arabic Greek Turkish Danish Swedish Norwegian Dutch Russian Polish Persian The supported language can be changed without any notice 18 MENU OPERATIONS Output Setting The STB has many A V Outputs Control this menu properly according to external components connected to the STB
27. nnectors of the CINCH cable to the AUDIO RIGHT red AUDIO LEFT white and the VIDEO output yellow socket on the STB Connect the other end 3 connectors to the AUDIO RIGHT red AUDIO LEFT white and the VIDEO input yellow socket on the TV or Hi Fi 3 Connection to the TV using the RF cable Connect a terrestrial antenna to RF IN socket on the STB Connect one end of the RF cable to the RF OUT Socket on the STB Connect the other end to the ANT IN socket on the TV 11 INSTALLATION Connection Connection to the other Satellite Receiver Connect the satellite antenna cable to the LNB IN socket on the STB With other connector connect the IF OUT socket on the STB and the LNB IN socket of the other STB or STB GETTING STARTED Press the Power button to operate the STB from the STANDBY mode Now the Info Box will appear for a given time and disappear By pressing 4 button the Info Box will remain on the screen The display time of the Info Box is adjustable in the System Setting menu of the Main menu IMPORTANT Before taking charge of your new STB some important technical settings are essential First press the MENU p button on the RCU to make the Main Menu appear Go to the LNB Setting item in the Installation menu and press button Choose the right parameters for Satellite Name LNB Frequency LNB Power 22KHz DiSEqC 1 1 and DiSEqC 1 0 Set the Motorized DiSEqC1 2 and the USA
28. or Goto Ref Go to reference Limit E Limit W Set the limits of East and West position Limit Off Remove the limitation Reset Reset all the stored position of the motor relative to the 0 position Service Search After saving the DiSEqC configuration at the highest signal quality press button to start service searching of the selected satellite USALS Setting USALS is very convenient motorized DiSEqC system that supports DiSEqC 1 3 command and also can get the satellite position automatically if you know your geographical location Basically the listed satellites have its Longitude and therefore the angle of the satellite can be calculated without problem If you have USALS motorized system then you can use the USALS as followings USALS Setting Motorized DiSEqC 1 3 lt gt Enable Satellite Name 3640 H 27850 X 00 Quality For USALS Select Enable 2 Move Item Select Position Previous Menu 28 MENU OPERATIONS A Motorized DiSEqC1 3 Select Enable or Disable If you are using DiSEqC1 3 switch set to Enable B Satellite Name Select a satellite that will be used to identify a motor system C Satellite Angle It is the longitude of the selected satellite and it can be set automatically in case of selecting a satellite name You can use numeric keys of RCU to enter the angle East or West will be selected by 4 button D My Longitud
29. ormation box To control the volume in the information box you have to press 4 gt button two times without interval If EPG is available on programs by using gt buttons you can see the EPG You can see extended information of the event by pressing button once more EPG Electronic Program Guide To display the information about currently being E Pi Guid broadcasted as well as those that will be E broadcasted next press button on the 00 00 00 00 remote control unit i i JOURNAL News Business If EPG is available on programs you will see EL CEN the detailed description of the programs i EE insight start end time and programs schedules etc Toggle EPG Type Previous Day Next Day 9 Next Info Page Reserve selected programm buttons will be used to move program SO and to see next program schedules P buttons will be used to switch the service button makes the reservation for the next program AL button shows extended information of the event will change the contents of EPG between TV and Radio services Red button switches the EPG from Single Service to Multi Service and opposition 37 FUNCTION GUIDE Subtitle You can choose a language of subtitle using button on the RCU If the broadcaster provides subtitles you can see _ symbol in the Information Box Teletext If the broadc
30. r 750 IEC 169 2 Female Male Frequency 470 860MHz PAL 470 890MHz NTSC Output Service CH21 69 PAL CH3 4 14 83 NTSC TV standard PAL G I K NTSC M selectable by Menu 43 SPECIFICATIONS Power Supply Input Voltage 90 250VAC 50 60Hz Type SMPS Power Consumption Running Max 24W Standby 9W Protection Separate internal fuse The input shall have lightning protection Physical Specification 340mm Model Size W x H x D 340 x 60 x 265 mm Weight Net 3 0Kg Physical Specification 260mm Model Size W x H x D 260 x 54 x 185 mm Weight Net 1 8Kg Specifications and functions may be changed improvement without notice in advance 44 for www i topfield com 110T F45B3 201 0 rev 2
31. r on screen service information Subtitle supported Teletext supported by VBI insertion and software emulation Parental lock facility by service and program event Program and Service information transfer from receiver to receiver Exciting games embedded RF modulator output S PDIF for digital audio or Dolby AC 3 bitstream output SCART and RCA A V output CVBS RGB YUV and S VIDEO output SCART connector VCR Timer function FRONT REAR PANELS REAR PANELS 1 FRONT PANEL DISPLAY During the STANDBY mode the current time is displayed When the power is ON the current status is displayed TV Radio Menu POWER The power button of STB ON Stand by CHANNEL Change the channels LED TV STB REMOTE STAND BY 2 REAR PANEL VIDEO OUTPUT AUDIO LEFT OUTPUT RF OUT DD LNB IN SCART AUDIO RIGHT OUTPUT FRONT REAR PANELS 1 LNB IN Connect the satellite antenna cable 2 LNB Out Use it to connect to another STB 3 VIDEO OUTPUT Video output YELLOW 4 AUDIO RIGHT OUTPUT Audio output RED 5 AUDIO LEFT OUTPUT Audio output WHITE 6 RF IN Connect the TV antenna 7 RF OUT Connect the TV RF IN 8 RS232 Upgrade the STB data amp software 9 TV SCART Connect the TV or VCR 10 S PDIF Optical output for Digital Audio REMOTE CONTROL UNIT RCU REMOTE CONTROL UNIT RCU 1 POWER Button Switch the STB bet
32. select LNB or antenna NOTE If the LNB Frequency is set to Universal LNB 9750 10600 9750 10700 or 9750 10750 it is not possible to set 22KHz because high or low band is selected by 22KHz DiSEqC 1 1 The STB is designed to be DiSEqC 1 1 compatible This allows multiple antennas to be connected to the STB at the same time If you are using two or more fixed antennas or LNBs then it is recommended to use a DiSEqC 1 1 switch If you use DiSEqC 1 1 switch only it is possible to connect up to 4 antennas Set the DiSEqC 1 0 to Disable and select an item in DiSEqC1 1 23 MENU OPERATIONS If you use DiSEqC1 1 switch and DiSEqC1 0 switches it is possible to connect up to 16 antennas Connect the DiSEqC1 1 switch to the LNB input and connect the DiSEqC1 0 switches to the DiSEqC1 1 switch Set the DiSEqC1 1 item and DiSEqC1 0 item according to the antenna configuration For example set DiSEqC1 1 to 2 of 4 and DiSEqC1 0 to 3 of 4 to select 7 STB yp LNB IN i DiSEqC 1 1 Switch H DiSEqC 1 0 The STB is designed to be DiSEqC 1 0 compatible This allows multiple antennas to be connected to the STB at the same time If you are using two or more fixed antennas or LNBs then it is recommended to use a DiSEqC 1 0 switch Select one of 1 of DiSEqC to 4 of DiSEqC Mini A Mini B or Disable according to the option or the configuration of DiSEqC switch box or antenna Service Se
33. uency Or by pressing or gt buttons you select and view a frequency one by one C Symbol Rate You can see the symbol rate of specified satellite on the right side of the menu D Polarization You can select the polarization from Horizontal and Vertical modes E SAT Name Edit You can change the name of the satellite name by this menu Press button to display a keyboard There are several items such as Other Save and Space in the keyboard By selecting Other item you can see a new alphabet character sets The Space item make a space between two characters And the Save item is used to confirm the new name of the satellite Notes You can move the cursor in the keyboard row by lt or and column by As Or W button 30 MENU OPERATIONS F Add New TP In case of new transponder information is added by broadcaster you can add new TP transponder information and enjoy new services Before adding new TP information you should know the frequency symbol rate and polarization types After adding new information you should confirm the new information by pressing button at OK item G Delete TP By selecting this item you can delete the selected TP Transponder information H Add Satellite Using this menu you can add new satellite name by keyboard then it will be added in the Satellite Name menu 1 Delete Satellite By selecting this item you can delete the selected satellite information
34. ween Operation and Standby mode 2 MUTE Button Enable Disable the Audio 3 Numeric Buttons EE Select the TV or Radio service services and menu options 4 MENU Button 7 Display the Menu on screen or return to previous menu from submenu 5 GUIDE Button Display the EPG on screen when available Remove EPG when EPG is displayed 6 V V Buttons 4 Adjust the volume Increase Decrease Change the value of the selected item in Menu 7 P P Buttons A NE Service up or down through the available services Move the selection bar in Menu 8 OK Button Display Service List on screen Select an item in the menu 9 EXIT Button e Return to the previous menu and the Screen 10 INFO Button 2 Display the program information box on the Screen and remove it Display the extended event information when the information box is displayed 9 REMOTE CONTROL UNIT RCU 11 RECALL Button Select the previously viewed service 12 TV Radio Button Select the TV Radio mode 13 PAUSE Button Pause the live picture 14 TV STB Button Change the terrestrial TV and STB mode 15 SOUND Button 8 Select Sound Track and LEFT RIGHT MONO STEREO sound Select the multifeed service if multifeed is available 16 SUBTITLE Button Activate the subtitle se
Download Pdf Manuals
Related Search