Targus PACD010/400-0137-001B Computer Drive User Manual
Contents
1. 24x CD speed 3 600 KB s 8 cm 3 15 inches and 12 cm 4 72 inches The Targus drive reads formats according to the following CD compact disc and DVD digital versatile disc standards Audio CDs i trax CD CD Digital Audio Kodak Photo CDs single and CDI CDi Ready CD Midi ulti session CD R CD RW CD Plus Mixed Mode CDs CD ROM XA MS DOS operating system CD TEXT CD EXTRA 2s CDs High Sierra Mode 1 Data CDs Joliet Mode 2 complying with ISO Enhanced CD 9660 UDF Universal Disc Format Video CDs Targus USB 2 o CD ROM Slim External Drive Troubleshooting To view Frequently Asked Questions FAQ and download driver updates visit our Web site at http www targus com support asp Solving General Problems If the Targus drive is not functioning Verify that your system meets the hardware requirements See System Requirements on page 3 Check that the drive is receiving power by making sure the drive indicator light is glowing green Make sure that the cable is firmly attached to the drive and that both ends of the Y cable are fully inserted into available USB ports on your computer If there is no sound when using the Targus drive check that The disc you are using is an audio disc or supplies audio output The headphones speakers are correctly connected The cable is in good condition The volume is turned up The audio software is installed Technical Support Hav2. 001 eS L weld SINd weld SINd AANGAS NOY 9NOH O1NOHO L sa139NV SO AHOA MAN 3qinD s yuasn AU IeLLISTC4d WHS WOY d D oc asn HOISEY S417 N ano Buie lN SND SldVd NOdNO AYOdVONIS WVqQHa31SAV ONV IIA OAMO L VNO1T3O9tivg 8T00 T0 00t OTOdIVd dul snBje pue jeuopeusayu dnoJs snbiel vooz 3nou 3noujM Bueu2 0 p fqns ae suone yi eds pue s ime j UJO2 Shn JeyY mmm Je SYS q AA JnO3ISIA J9ISe3 J 1 SON sno Bupjew go H3AONNVH S1T3ssnug TARGUS USB 2 0 CD ROM SLIM EXTERNAL DRIVE Introduction Thank you for purchasing the Targus Targus USB 2 0 DVD CD RW Slim External Drive that allows you to read audio and data CDs After installing the Targus drive you can use it at any time by connecting the supplied Universal Serial Bus USB Y cable to your computer s USB ports This user s guide describes how to connect and operate the Targus drive In addition to this user s guide this package contains Targus Targus USB 2 0 DVD CD RW Slim External Drive USB Y cable System Requirements To use the Targus drive your computer must meet the following hardware requirements and run one of the operating systems listed below Hardware PC with an Intel Pentium processor or equivalent and a hard disk drive 64 MB RAM or higher depending on the operating system Two 2 USB 1 1 or 2 0 interface ports NOTES WHEN CONNECTED TO USB VERSION 1 1 PORTS THE DRIVE S PERFORMANCE
3. LEVEL WILL BE LESS THAN OPTIMAL FOR BEST RESULTS CONNECT THE DRIVER TO USB VERSION 2 0 PORTS Targus USB 2 o CD ROM Slim External Drive THE TARGUS DRIVE RECEIVES ITS POWER FROM YOUR COMPUTER S USB PORTS YOU MUST HAVE A MINIMUM OF TWO USB PORTS TO USE THE DRIVE THEY MUST BE IN FULL COMPLIANCE WITH THE USB SPECIFICATIONS AND SUPPLY A MINIMUM OF 5V 500MA OF POWER Operating System Windows Me 2000 XP Connecting the Drive and Installing the Drivers NOTES INSTALLING THE TARGUS DRIVE MAY CHANGE INTERNAL DRIVE LETTER ASSIGNMENTS YOU CAN CONNECT THE TARGUS DRIVE TO YOUR COMPUTER VIA A HUB OR PORT REPLICATOR AS LONG AS THE DEVICE HAS ITS OWN AC POWER ADAPTER The Y cable that connects the Targus drive to your computer has two USB type A connector ends one single and one with a USB pass through The connector with the USB pass through supports up and downstream data flow between your computer and supported devices connected to the pass through connector and provides power to the drive The single connector supports up and downstream data flow between the drive and your computer and also provides power to the drive CAUTIONS AVOID CONNECTING A HIGH POWER DEVICE SUCH AS A PRINTER OR SCANNER TO YOUR COMPUTER VIA THE Y CABLE S PASS THROUGH END AS THE DEVICE MAY NOT WORK PROPERLY AND OR CAUSE THE TARGUS DRIVE TO STOP WORKING TEMPORARILY FOR BEST RESULTS CONNECT ONLY LOW POWER DEVICES SUCH AS A MOUSE OR KEYBOARD TO THE PASS THROU
4. G THE READABLE SIDE OF THE DISC MAY CAUSE READ ERRORS POOR PERFORMANCE OR FAILED OPERATION Targus USB 2 o CD ROM Slim External Drive 1 Turn on your computer and press the drive s eject button to open the tray 2 To insert a disc hold it by the edges and place it in the tray with the readable plain side down 3 Close the media tray by gently pushing it until it clicks into place 1 USB 2 0 cable port Audio out jack Media tray Indicator light Eject button Emergency eject hole Targus drive To remove a disc grasp it by the edges and gently pull up until the disc is released Removing a Disc Using the Emergency Eject Feature QU CAUTION UsE THE EMERGENCY EJECT MECHANISM ONLY IF THE TARGUS DRIVE IS NOT y CONNECTED TO YOUR COMPUTER OR IF THE COMPUTER S BATTERY IS FLAT AND THERE IS NO POWER AVAILABLE FOR THE EJECT BUTTON EXCESSIVE USE OF THE EMERGENCY EJECT MECHANISM MAY DAMAGE IT AND CAUSE THE MECHANISM TO STOP WORKING To manually remove a disc when there is no power to your computer 1 Gently insert a slim straight object such as a straightened paper clip into the emergency eject hole until you feel some resistance 2 Remove the paper clip Targus USB 2 o CD ROM Slim External Drive 3 Carefully open the tray by hand Hot Swapping You can connect and disconnect the Targus drive while the computer is running When connecting the Targus drive first connect the Type A connectors of the Y ca
5. GH END F USING A HUB OR PORT REPLICATOR THE USB PORTS ON THE DEVICE MUST PROVIDE AT LEAST 500 MA PER PORT FOR THE TARGUS DRIVE TO WORK PROPERLY ALSO FOR BEST RESULTS TURN OFF ANY HIGH POWER DEVICES ON THE HUB OR PORT REPLICATOR WHILE USING THE DRIVE Targus USB 2 o CD ROM Slim External Drive NOTE Nor ALL USB HUBS AND PORT REPLICATORS WILL SUPPORT THE USE OF THIS DRIVE WITH THE Y CABLE IF YOUR HUB OR PORT REPLICATOR DOES NOT ALLOW THE DRIVE TO FUNCTION THE DRIVE WILL NEED TO BE ATTACHED DIRECTLY TO THE USB PORTS ON YOUR COMPUTER When the USB type A connectors are used together the Y cable provides enough power to run the Targus drive eliminating the need for an AC power adapter 1 Using the supplied Y cable connect the USB type A connector with the USB pass through into a USB port on your computer 5 ce Type B J Y cable with USB type A and B connector ends 2 Connect the single USB type A connector into another USB port on your computer for additional power to the drive 3 Connect the cable s USB type B connector the single end into the Targus drive Your computer s operating system automatically detects the new hardware and begins installing the appropriate default drivers 4 Follow the on screen instructions to complete the driver installation You can now begin using the drive Using the Drive Inserting and Removing a Disc CAUTION AVOID TOUCHING THE READABLE PLAIN SIDE S OF A DISC TOUCHIN
6. ble and then connect the Type B When disconnecting remove the Type B connector from the drive first Playing Audio CDs To play audio CDs use the Windows Media Player included in your computer s operating System The Targus drive supports digital audio extraction DAE for audio CD playback This allows you to listen to audio CDs via your computer s built in audio system without connecting external devices such as headphones or speakers To use this method the digital audio feature in Windows Media Player must be enabled You can also listen to audio CDs by connecting headphones or external speakers to the audio out jack on the Targus drive However you must disable the digital audio feature in Windows Media Player otherwise you will continue to hear audio through your computer To enable or disable the digital audio feature refer to the Windows operating system manual that came with your computer or select the Help option in Windows Media Player Things to Remember Operating Hints Never press the eject button while the Targus drive is accessing a disc The Targus drive operates in either an upright or horizontal position To prevent possible damage avoid changing the drive s position while it is in use Targus USB 2 o CD ROM Slim External Drive Avoid using or storing the Targus drive in extreme temperatures The environmental specifications while operating are 50 113 degrees F 10 45 degrees C After transport
7. e the following information available The serial number of your Targus drive located on the back of the drive The name and model of your computer and details of its hardware specification The name and version number of your operating system and of the software that was running when the problem occurred 10 Targus USB 2 o CD ROM Slim External Drive A detailed description of the problem including exact error messages and when these errors occurred What you do to replicate the problem f this is a new problem whether you have recently changed your system configuration and in what way For technical questions please visit US Internet http www targus com support asp Australia Internet www targus com au Email infoaust targus com Telephone 1800 641 645 New Zealand Telephone 0800 633 222 Product Registration Targus recommends that you register your Targus accessory shortly after purchasing it To register your Targus accessory go to http www targus com registration asp You will need to provide your full name email address phone number and company information if applicable Warranty Targus warrants this product to be free from defects in materials and workmanship for one year If your Targus accessory is found to be defective within that time we will promptly repair or replace it This warranty does not cover accidental damage wear and tear or consequential or incidental loss Under
8. ing the Targus drive allow it to reach room temperature before using it Q CAUTION CHANGES IN TEMPERATURE DURING TRANSPORT PARTICULARLY FROM A COOL TO A WARMER TEMPERATURE CAN CAUSE CONDENSATION TO FORM IN THE DRIVE AND MAY RESULT IN OPERATING PROBLEMS ALLOWING THE DRIVE TO REACH ROOM TEMPERATURE HELPS TO PREVENT THIS Avoid using the Targus drive in dusty or humid surroundings A short delay is normal before the Targus drive reads an audio CD CD ROM DVD or DVD ROM WARNING NEVER CLEAN THE TARGUS DRIVE WITH A COMMERCIALLY AVAILABLE CD or CD ROM CLEANING SET AS DOING SO MAY CAUSE DAMAGE TO THE DRIVE Safety Measures Any attempt to disassemble adjust or repair the Targus drive may result in exposure to laser light or other safety hazards This is a Class 1 Laser Product This product complies with all applicable safety standards DHHS Rules 21 CFR Chapter 1 Sub chapter J The laser beam generated is totally enclosed during all modes of normal operation and no hazardous laser light is emitted from the drive Specifications Dimensions Length 6 1 inches 15 5 cm Width 5 6 inches 14 2 cm Height 0 75 inches 1 9 cm Weight 14 6 ounces 414 g Computer connection USB 1 1 or 2 0 use USB 2 0 for best DVD playback performance Targus USB 2 o CD ROM Slim External Drive Voltage Access Time Data Buffer Maximum Speed Supported Disc Sizes Media Formats DC 5V 5 CD 220 ms random CD 128 kB CD Mode
9. no conditions is Targus liable for loss of or damage to a computer nor loss of or damage to programs records or data nor any consequential or incidental damages even if Targus has been informed of their possibility This warranty does not affect your statutory rights Product Registration at http www targus com registration asp 11 Targus USB 2 o CD ROM Slim External Drive Regulatory Compliance This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions 1 This device may not cause harmful interference and 2 This device must accept any interference received including interference that may cause undesired operation FCC Statement Tested to Comply This equipment has been tested and found to comply with the limits of a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference b
10. y one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Move the computer away from the receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected All trademarks and registered trademarks are the property of their respective owners 12
Download Pdf Manuals
Related Search