Home

TANDBERG Utility Telephone User Manual

1. Trusted sites Figure 6 3 3 Enter the Release key in the Release Key field and press the Install Software button 166 6 Appendices A new page will now be displayed A TANDBERG Management Microsoft Internet Explorer provided by TANDBERG ji oj sl File Edit View Favorites Tools Help ay Qm O SI een Sere O C 5 LAO 3 Address http 10 0 4 6 clos 5 Overview M Phonebook System status System configuration 7 Endpoint configuration ID ISDHH 320 network BRI H 323 SIP wireless lan SNMP ODataport Hetwork profiles Misc Upgrade Far end upgrade Software Upgrade Software Upload Select Software File Press Browse to select the software upgrade file and press Install to proceed with the software upload System parameters will automatically be saved Select the software file sS0000632 pka Browse Press Cancel to abort now and go back to upgrade page To see a detailed progress indication connect through telnet before pressing Install Cancel Figure 6 4 4 Type in the path to where the new software file is stored or select the file by using the Browse button 5 The progress for the sw upgrade can be tracked by pressing the telnet link in the help text box BEFORE pressing the install button Please note that this is not a necessary action for a successfull software upgrade An indication of the software upgrade progress will
2. TANDBERG COMPASS MXP UTILITY MXP 4 4 1 Video Algorithm The system will automatically select the best video algorithm based on the video source and the capabilities of the remote system Use this menu to disable video algorithms in case you have interoperability issues calling other systems H 264 Bandwidth efficient video compression and decompression H 263 Normal video compression and decompression H 261 Legacy video compression and decompression The system will always have H 261 enabled Therefore it is impossible to uncheck H 261 96 4 Administrator Settings 4 4 2 Audio Algorithm The system will automatically select the best audio algorithm based on the call rate and the capabilities of the remote system Use this menu to disable audio algorithms in case you want to remove low quality audio or if you have interoperability issues calling other systems G 722 High quality audio 7 kHz at 48kbps 56kbps or 64kbps G 728 Compressed normal quality audio telephone quality 3 1 kHz at 16kbps G 711 Normal quality audio telephone quality 3 1kHz at 64kbps This audio algorithm is mandatory for video conferencing equipment and is impossible to uncheck G 722 1 Compressed high quality audio 7 kHz at 24kbps 32kbps and 48kbps AAC CD quality audio MPEG 4 Advanced Audio Coding Low Delay 20 kHz mono at LD 64kbps Call Rate vs Audio algorithms selected Modify remove algorithms used by unchecking the different au
3. Dual Monitor Emulation Side by Side PC Zoom Simultaneous videoconference amp local PC mode VIDEO INPUTS 1 INPUT Built in main camera 1 x DVI I SXGA PC Input 800 x 600 60 72 75 85 Hz 1024 x 768 60 70 75 Hz 1280 x 1024 60 Hz Extended Display Identification Data EDID VIDEO FORMAT NTSC PAL VGA SVGA XGA or SXGA LIVE VIDEO RESOLUTIONS NATIVE NTSC ASIF 704 x 480 pixels Digital Clarity SIF 352 x 240 pixels NATIVE PAL 4CIF 704 x 576 pixels Digital Clarity CIF 352 x 288 pixels QCIF 176 x 144 pixels SQCIF 128 x 96 pixels receive only 147 6 Appendices SECURITY FEATURES Management via HTTPS IP Administration Password Menu Administration Password Dialing Access code Streaming password H 243 MCU Password VNC password SNMP security alerts Disable IP services MD 5 Challenge Network settings protection SIP Authentication via NTLM and Digest Authentication IEEE 802 1x NETWORK INTERFACES 3 x ISDN BRI Ru 45 Ginter face 1 x LAN Ethernet RJ 45 10 100 Mbit LAN DSL cable modem 1 x PC card slot PCMCIA for wireless LAN 1 x USB WIRELESS LAN SUPPORT Compliant with IEEE 802 11b up to 11 Mbit Support for 64 128 bit encryption WEP Infrastructure or ad hoc mode ETHERNET INTERNET INTRANET CONNECTIVITY TCP IP DHCP ARP FTP Telnet HTTP HTTPS SOAP and XML MD 5 Challenge SNMP Enterprise Management Internal web server Internal streaming serve
4. EMBEDDED ENCRYPTION H 320 and H 323 point to point calls Standards based H 233 H 234 H 235 v2 amp v3 DES and AES NIST validated AES NIST validated DES Automatic key generation and exchange Supported in Dual Stream IP NETWORK FEATURES H 235 Authentication Differentiated Services DiffServ Resource Reservation Protocol RSVP IP precedence IP type of service ToS IP adaptive bandwidth management including flow control Auto gatekeeper discovery Dynamic playout and lip sync buffering Intelligent Packet Loss Recovery IPLR H 245 DTMF tones in H 323 Cisco Call Manager integration using ECS IP Address Conflict Warning PRESENTATIONS AND COLLABORATION Natural Presenter Package including PC Presenter DVI I SXGA In PC SoftPresenter Digital Clarity amp Native Formats Dual Monitor Emulation Side by Side Streaming compatible with Cisco IP TV Apple QuickTime RealPlayer v8 etc SYSTEM MANAGEMENT Support for the TANDBERG Management Suite Total management via embedded web server SNMP Telnet FTP and SOAP Remote software upload via web server or FTP server DIRECTORY SERVICES Support for Local Global and Dynamic Server Directories Unlimited entries using Server directory supporting LDAP and H 350 400 number global directory 200 number local directory Last Number Called Call History Directories in Local Languages 16 SELECTABLE MENU LANGUAGES English German French Norwegian Swedish
5. Italian Spanish Portuguese Simplified Chinese Traditional Chinese Japanese Russian Korean Finnish Thai and Arabic CUSTOMIZED BOOT UP LOGO JPEG POWER Auto sensing power supply 100 250 VAC 50 60 Hz 45 watts max OPERATING TEMPERATURE AND HUMIDITY 0 C to 35 C 32 F to 95 F ambient temperature 10 to 90 Relative Humidity RH STORAGE AND TRANSPORT TEMPERATURE 20 C to 60 C 4 F to 140 F at RH 10 90 non condensing APPROVALS Directive 73 23 EEC Low Voltage Directive Standard EN 60950 Directive 89 336 EEC EMC Directive Standard EN 55022 Class B Standard EN 55024 Standard EN 61000 3 2 3 3 Directive 1999 5 EEC R amp TTE Directive Standard TBR3 Approved according to UL 60950 and CAN CSA C22 2 No 60950 Complies with FCC15B Class B 148 6 Appendices PRODUCT RELIABILITY MTBF The predicted reliability is expressed in the expected random Mean Time Between Failures MTBF for the electronic components based on the Power On Hours Power On Hours POH gt 69 000 hours Useful Life Cycle gt 6 years ISO 9001 certificate is available upon request Requires TANDBERG Management Suite 9 0 or newer System features vary depending on network selection and software package All specifications subject to change without notice TANDBERG is a registered trademark or trademark of TANDBERG in the U S and other countries RealPlayer is a trademark or a registered trademark of
6. Note that this service has limited access on some ISDN networks Example 12345678 2 up to four digit sub addresses are possible Validate Numbers MSN Multiple Subscriber Number The use of MSN Multiple Subscriber Number enables you to attach different ISDN terminals with different numbers to the same physical ISDN telephone line If Validate Numbers is set to On only calls to those numbers specified in the Line Setup menus will be answered This service can be ordered from your telephone company Parallel dial On Channels will be dialed and connected in parallel when setting up a BONDING call Off Channels will be dialed one by one which may increase the dialing time Send Own Numbers On The system will send its own numbers to the far end Off The system will not send its own numbers to the far end but please note that the network may still send your numbers to the far end Sending Complete On The system will send the ISDN message information element Sending Complete Off The system will not send Sending Complete 119 TANDBERG COMPASS MXP UTILITY MXP 4 8 2 LAN Settings LAN Settings contain IP Settings H 323 Settings SIP Settings Wireless LAN Settings SNMP Settings IP Services Quality of Service IEEE 802 1x 120 4 Administrator Settings 4 8 2 1 IP Settings Remember to restart the system after making changes to IP Settings This can be done by selecting the Save and Restart at the
7. Pin 5 RX Pin 6 TX 145 TANDBERG COMPASS MXP UTILITY MXP 6 Appendices Appendices Appendix 1 Technical Specification Appendix 2 Bandwidth Information Appendix 3 Environmental considerations Appendix 4 Guidelines for setting up videoconferencing rooms Appendix 5 Security Appendix 6 Using the file system Appendix 7 Web Interface Appendix 8 Connecting the system to ISDN using NT1 network adapters Appendix 9 Remote control Appendix 10 CallManager registration Appendix 11 Diagnostic Tools for IP Appendix 12 System Upgrade Appendix 13 Declaration of Conformity 146 Appendix 1 Technical Specification UNIT DELIVERED COMPLETE WITH Wireless remote control built in camera microphone speakers cables 12 1 LCD screen robust cabinet LED light source LCD SCREEN Wide view angle screen XGA resolution Auto or manual brightness Display Area mm 245 8 x 184 3 12 106 inch diagonal Number of Dots 1024 x 3 H x 768 V Pixel Pitch mm 0 240 H x 0 240 V Color Pixel Arrangement RGB vertical stripe Display Mode normally white Optimum Viewing Angle Contrast ratio 6 o clock Brightness cd m2 300 BANDWIDTH 770 880 990 H 320 up to 384 kbps H 323 up to 768 kbps SIP up to 768 kbps FIREWALL TRAVERSAL TANDBERG Expressway Technology Auto NAT VIDEO STANDARDS H 261 H 263 H 263 H 264 VIDEO FEATURES Intelligent Video Management Picture in Picture PIP
8. The system s IP address and IP subnet mask must be specified in the IP address field IP Precedence Used to define which priority the system should have in the network Higher numbers indicate higher priority IP subnet mask Defines the type of network This address is only used in static mode IP TOS IP Type Of Service Helps a router select a router path when multiple paths are available iSIF Interlaced SIF 352x240 pixels 60 fields per second L Layout Use the Layout key to change picture layout on the screen Main Camera Your camera Video input 1 175 TANDBERG COMPASS MXP UTILITY MXP Max call length This feature will automatically end both incoming and outgoing calls when the call time exceeds the length specified Max channels Indicates the maximum number of channels the system is allowed to use on the E1 T1 interface MCU Multipoint Conference Unit MCU status line Shows indicators for MultiSite MCU and DuoVideo MicOff Microphone is switched off Mix mode How to adjust the weighting of each microphone to obtain the best possible audio and minimize the background noise Modem mode Dataport Supports external control of the system via a PC as in Control Mode Once a call is established Dataport 1 will automatically switch to Data mode When the call disconnects Dataport 1 switches back to Control Mode MSN Multiple Subscriber Number Possible to attach different ISDN terminals with different
9. log on to the administration web interface and go to the phone configuration page The Phone configuration page is located on device top menu gt Add a New device gt Phone gt H 323 Client In the phone configuration page type the IP address of the TANDBERG system in the Device name field select device pool and push the insert button A pop up box will now appear on the screen and ask you if you would like to configure the directory number Push the ok button You should now see the Directory Number Configuration WEB page Enter the E 164 phone number of your TANDBERG system in the Directory number field and in the Forward and Pickup Settings enter the time of No Answer Ring Duration The time selected has to have a value from 1 to 300 seconds Push the Add button to update the CallManager with the directory number settings You have now configured the CallManager with a H 323 client and should be able to register the TANDBERG system to When the TANDBERG system is registered to a CallManager it will be possible to place and receive calls from this system to any other video and voice systems that are registered on the same CallManager 162 6 Appendices Appendix 11 Diagnostic Tools for IP To use these tools will require using a PC and setting up a telnet session towards the system Q 931 To show Q 931 trace during a call you need to issue the command syslog on One can get traces for RAS Q 931 and H 245 wi
10. 2 30 H 263 XGA 4 30 SVGA 3 30 VGA 2 30 SQCIF 1 30 QCIF 1 30 CIF 1 30 4CIF 2 30 131 TANDBERG COMPASS MXP UTILITY MXP 4 8 2 4 Wireless LAN Settings SSID Service Set Identification Example WLANNETWORKk Defines a local network id for this wireless region It must be the same for all end points and the access point An endpoint will find the access point if the SSID is correct however if the encryption key is faulty it will not transmit any data Community optional Community can be used when connecting to an access point where the SSID is the same Example Unit2 WLAN Mode AdHoc Used when not communicating with an access point Managed Used when communication is made through an access point Make sure the corresponding settings are programmed into the access point Press Restart from Control Panel in order to activate the settings Required cards e Compaq WL110 11 Mbps Wireless LAN e Lucent Orinoco 11 Mbit s SILVER e Lucent Orinoco 11 Mbit s GOLD e Cisco Aironet 350 series AIR PCM 350 series e Enterasys Networks RoamAbout 802 11 DS High Rate e Melco Buffalo WLI PCM L11G Recommended access point e Compaq WL410 base station Note The PC card PCMCIA card used must comply with the relevant regulations for such cards in the country where it is used The unit must be supplied by power supply AC DC adapter powerbox SPN 270 12 which complies with the requirements for limited power sourc
11. Book in Kiosk Mode Corporate The system will use the Corporate Directory in Kiosk Mode Kiosk Mode Kiosk Menu On The Kiosk Mode menus will appear on the screen Off No menus or indicators will appear on the screen 81 TANDBERG COMPASS MXP UTILITY MXP 4 2 6 Startup Welcome Menu The Welcome Menu contains the Main Menu System Status your System Name and dial in numbers On The Welcome Menu is shown when the system wakes up from standby mode Off The Welcome Menu is not shown when the system wakes up from standby mode Press the OK button to open the welcome menu Welcome Picture The Welcome Picture is what you see in the background of the welcome menu Selfview Selfview is shown in the background of the welcome menu In most cases this means that main camera is displayed and you can see the video image of yourself Off No picture is shown in the background of the welcome menu Logo It is possible to upload a company logo to the system For more information about how to upload a Logo see Appendix 6 Set the Logo settings to On to display the logo On Choose On if you want the company logo to appear in the background of the welcome menu Off The logo is not displayed Note The TANDBERG Logo will be displayed if no other company logo is loaded and logo is enabled Display Welcome Text The welcome text displays your system name and dial in numbers by default It is possible to hide this information by choosing
12. COMPASS MXP UTILITY MXP 1 2 3 4 Table of Contents Diiira e leila EE 1 TET AU EI IEN 3 Te Men StrUCtUrS 2 eerste behead eech anenai aaae aaaea aradan ae eA aeaaaee aae aae Ta 5 dE te BEE 8 a le lee EE 9 2 2 Connecting Cables criera ena aaa a aa Eea EES ES EEEdee Kee EaR 10 2 3 Monitor Confguraton 11 2 4 System Confguration sssini n aasian ain aa adiantan daian iaai iaaiaee 12 General USO innia a a a Eae E a Ea aa aa aaa Zeg eege 15 3 1 The Welcome Screen Normal Mode 16 3 2 The Welcome Screen Kiosk Model 17 3 3 Using the Remote Control 19 3 3 1 Ee EI EE 21 3 3 2 Number and Letter kOyS ccccceecccceeseceeeeeeeceeeeeeeceeeeeeeaeeeeeaaaeeseeaeeeseseaeeesneeaeenees 22 3 4 On screen INGICALOIS 0 02 eee cece cece cece ce ceeeeeeeaeeeeeaeeeeeecaaeeeeaaeeeeeeeaeeeeaaesseaeessaeeesaeeseaaesseneeeaas 23 3 5 Using the Kiosk Men eegenen d geen deeg degen e 24 3 6 Using the Language Men 25 3 7 Place a Eelere EEN EENEG 26 3 8 Receive a alles EEN CERN 27 3 9 End e 28 9 10 Using the Handset EE 29 Bibl Standby EE 31 3 12 Phone Book My Contacts 32 3 121 Acel New Contact isorinis aeiiae aaea EEN 33 3 122 Edit Contacts atch neisi nee Avena 34 8 1233 Delete Contact riiseni iiaia aiaa anaa a aa aan aiia aaa anada 35 3 12 4 Copy Contact to My Contacts cccceeeceeeeeeeeceeeeeaeeeeeeeceaeeesaaeeseaeeseeeescaeeeeaeeeeneeeaas 36 3 13 Camera Control EE 37 3 14 Dual Stream Duoyideof EH 2201 38 3 15 C
13. Data Port Not available on this product 6 Save changes Remember to save any changes made in the menu by selecting the Save button on the Menu line and pressing OK Kiosk Mode Settings Press OK Menu to open the Main Menu if not already displayed Select Control Panel Administrator Settings Menu Settings Kiosk mode Settings to open the Kiosk Mode Settings menu The default Kiosk Mode settings for the Utility MXP are Language menu OFF Available languages check boxes with all languages Auto dial ON Allowuse of Remote Control YES Phone Book Local Kiosk menu OFF After having configured the settings of the Utility MXP you must activate Kiosk mode by setting Kiosk Mode til ON Be avare that you cannot deactivate kiosk mode again through the menu but only through the web interface telent or the remote control The default Kiosk Mode settings for the Compass MXP are Language menu OFF Available languages check boxes with all languages Auto dial ON Allow use of Remote Control NO Phone Book Local Kiosk menu ON After having configured the settings of the Compass MXP you must activate Kiosk mode by setting Kiosk Mode til ON Be avare that you cannot deactivate kiosk mode again through the menu but only through the web interface telent or the remote control See Kiosk Mode Settings for more details 3 General Use 3 General Use Wake up the system When the system is
14. Display Welcome Text Off 82 4 Administrator Settings On Welcome text is displayed on the welcome menu Off Welcome text is not displayed on the welcome menu Welcome Text You can change the welcome text to any text you like instead of the default text Remember that Display Welcome Text must be On to be able to edit the welcome text 83 TANDBERG COMPASS MXP UTILITY MXP 4 2 7 Icons The following indicator icons may be set to on or off Mic Off Volume Off On Air Encryption Bad Network Telephone See On screen Indicators for details 84 4 Administrator Settings 4 3 Presentation Settings The presentation settings are only available when Kiosk Mode is deactivated Presentation Presentation Start O Auto Manual H239 Disabled Q Enabled Startup Video Source Current e Presentation Source PC gt Snapshot Source Mam Cam FK Auto Display Snapshot 9 Auto Manual PIP Appearance Auto Q On PIP Placing Top Right gt VNC Settings Ier en e Figure 4 14 Presentation settings menu Presentation Settings contain Presentation Start H 239 Startup Video Source Presentation Source Snapshot Source Auto Display Snapshot PIP Appearance PIP Placing VNC Settings 85 TANDBERG COMPASS MXP UTILITY MXP 4 3 1 Presentation Start If your system has Dual Stream capabilities you can show two video streams at the same time see also Dual Stream Presentation Start is Auto by
15. H323 Bandwidth SIP Mic1 Mic2 Mic3 Audio4 Audio5 Audio6 Mix Mode VCR Ducking Mic1 Mic2 Mic3 Audio4 Audio5 Audio6 Out1 Out2 AUX Out3 VCR Out1 Mode Out1 Out2 AUX Out3 VCR Mic1 Mic2 Mic3 Audio4 Mics Audio5 AUX Audio6 VCR Received Audio Video Call Alert Tone Telephone Alert Tone Alert Volume Alert Speaker Key Tones Camera Tracking Mode MCU Status Line Web Snapshot 46 Picture Control Video Name Network Type Advanced ISDN Settings ISDN PRI Settings Channel Hunting Advanced ISDN PRI Settings Leased E1 T1 Settings External network configuration 47 3 General Use MultiSite Picture Mode Focus White balance Brightness Main Cam AUX Doc Cam VCR PC VGA VNC ISDN BRI PRI Leased E1 T1 Enternal H331 ISDN Switch Type ETSI Euro ISDN Line1 Setup On Number Number SPID1 SPID2 Line2 Setup On Number Number SPID1 SPID2 Line Setup On Number Number SPID1 SPID2 Subaddress Validate Numbers MSN Parallel Dial Send Own Numbers Sending Complete Number Range ISDN PRI Switch Type Max Channels Low Channel High Channel Search High Low Line Settings T1 Cable Length 1 T2 Cable Length 2 E1 CRC 4 NSF Code Video NSF Code Telephone Call Call Control Network Interface Max Channels Start Channels T1 Line Coding Line Settings Call Control RS66 TANDBERG COMPASS MXP UTILITY MXP IP Settings H 32
16. Kiosk Mode settings allow you to make some adjustments to the system s behavior in Kiosk Mode Kiosk Mode Language Menu a CO op e mm Figure 4 13 Language selection menu If Language Menu is enabled you will first see the language selection menu Select language and the Welcome Menu will be displayed with your desired language On When On the system will display the language menu as the first menu in kiosk mode Off When Off the system will display the welcome menu in English default Kiosk Mode Available Languages In Kiosk Mode the system supports 7 different languages for its simplified on screen menu English German French Norwegian Swedish Italian and Spanish Select the preferred language 80 4 Administrator Settings Kiosk Mode Auto Dial On The system will automatically dial to the first contact in the Phone Book when he handset is lifted If this contact is busy the system will call the second number in the Phone Book and so on If the user places the handset in the cradle the system will switch to Speaker Mode Only the Far End system can end the call Off The system will not make a call automatically when the handset is lifted Applies only to systems with handset Kiosk Mode Allow Use of Remote Control Yes All keys on the remote control are enabled No All keys except the arrow keys and OK key are disabled Kiosk Mode Phone Book Local The system will use the Local Phone
17. MXP It is possible to add new contacts and edit or delete existing contacts My Contacts can store up to 200 contacts It is possible to sort the names into a specific sequence by adding digits e g 00 99 as a prefix to the name The list is sorted alphanumerically The settings box below depicts the My Contacts list when the Kiosk Mode is deactivated i e when in set up mode Note With regard to Auto Dial and Make a Call it is possible to select which Phone Book the system uses either the locally stored My Contacts or the list available via LAN and TMS known as Corporate Global Directory Phone Book My Contacts Back Aaron Johnson Auto Bett Frank H 323 Daniel Lund Auto David Lee Auto Eric Harper H 323 Fredrik Hansen Auto Frida Smith Auto Helen Holm H 323 lan Brown Auto John Anderson Auto Linda Crow H 323 Liz Strand Figure 3 10 Phone Book My Contacts 32 3 General Use 3 12 1 Add New Contact The Add New Contact function is available from My Contacts It is recommended to add new contacts remotely using the IP address and the web interface or telnet To perform the following using the remote control the Kiosk Mode must first be deactivated This is done via the telnet or web interface or by pressing 5 times on the Phone Book symbol then once on the number 3 on the remote control The remote control can be directed to the inside lower edge of the Compass MXP cabinet i e the un
18. OU Gi GI mnovserc Figure 3 6 Language selection menu The language selection menu is an optional menu and is only active if Language Menu is ON in the Kiosk Settings Press the left right buttons on the Compass MXP to highlight the appropriate icon then press the center button to confirm selection 25 TANDBERG COMPASS MXP UTILITY MXP 3 7 Place a Call Autodial ON If Autodial is activated on either the Utility MXP or Compass MXP then a call can be placed by simply lifting the handset from the cradle The unit will then automatically call through the list of names held in either the Local or Global phone book If no connection is made after 7 seconds the unit will proceed to the next name on the list If the list is emptied without any connection the system will repeat through the list Place a Call Figure 3 7 Phone Book Autodial OFF If Autodial is not activated on the Compass MXP then it is possible to place a call using the five buttons to navigate through the kiosk menu To place a call on the Compass MXP first select Place a Call on the main Kiosk Menu using the left right buttons then press the central button to confirm the selection Then select the appropriate person or service to call by pressing the up down buttons and center button to confirm the selection Selecting and confirming Back will return the user to the main Kiosk Menu 26 3 General Use 3 8 Receive a Call How to answ
19. Presentation key is held down for 1 second then the Presentation video sources menu will appear 10 Press OK Menu to show the menu and to select menu items see Navigation 11 Use Zoom and to zoom the camera in and out zech N OOA OON 19 TANDBERG COMPASS MXP UTILITY MXP Figure 3 4 Remote Control This does not apply to all systems with small integrated cameras Selfview displays your outgoing video Press Selfview again to turn selfview off Use the Phone Book to store and recall video contacts for easy placement of calls see Phone Book Use the red End Call key to end the current call Pressing this key when not in a call will place the system in Standby mode see End Call and Standby Number Letter keys function in the same manner as with a mobile or cellular phone see Number and Letter keys Press Touch tones when you are ina call and need to dial extension numbers etc instead of presets Press the OK Menu button to exit Touch Tones 20 3 General Use 3 3 1 Navigation Arrow keys and OK Navigate in the menu with the arrow keys on the remote control The orange selector on screen shows the selected item Press OK to select Cancel key In the main menu pressing Cancel X will hide the menu If the menu is hidden bring it back with OK In other menus pressing Cancel X takes you one step back In an input field pressing Cancel X will delete character
20. Range 2326 2405 Audio Range 2326 2405 Data FECC Range 2326 2405 Table 9 MultiSite Duo Video Type UDP TCP TCP UDP UDP UDP Note While using MultiSite if a site is disconnected and reconnected without terminating the entire conference the next site to be connected will have a H 245 port outside of the specified range If this functionality is required through a firewall the range of TCP ports can be extended past 5564 However if a site is disconnected and reconnected without ending the conference enough times one can quickly end up outside of this range again 164 6 Appendices Appendix 12 System Upgrade Before starting the software upgrade of the TANDBERG MXP system please make sure to have the new software file for instance sO50000F30 pkg and the Release Key for this software available Your TANDBERG Partner will provide this for you All options and settings will automatically be stored when upgrading so no backup is necessary If the system upgrade process is aborted before it s complete the system will work as normal with the original software The TANDBERG MXP systems can be upgraded in three different ways Using the web interface Using FTP Using ISDN A To upgrade using the the web interface please do the following steps 1 Type the IP address of the TANDBERG MXP system that shall be upgraded for instance 10 0 8 77 in a standard browser such as Internet Explorer 6 0 2 Th
21. RealNetworks Inc QuickTime is a registered trademark of Apple Computer Inc registered in the U S and other countries Microsoft and NetMeeting are either registered trademarks or trademarks of Microsoft Corporation in the United States and or other countries All other trademarks are property of their respective owners Contains iType from Agfa Monotype Corporation Service availability may vary from region to region Please contact your TANDBERG reseller for more information 149 TANDBERG COMPASS MXP UTILITY MXP Appendix 2 Bandwidth information for TANDBERG Compass Utility MXP Utility Compass MXP Bandwidth Standard 768 IP only Point to Options 128 768 384 point 768 ISDN IP MultiSite Not Available Rate Not Available Matching Dual Standard Stream DuoVideo H 239 Secure All bandwidths Conference H 264 Up to 768 Picture Not Available Mode MultiSite 6 Appendices Appendix 3 Environmental considerations This section explains how to carry out basic adjustments and simple tests to ensure that you send and receive the best possible image and audio quality when using your system Iris control and lighting By default the system camera will use an automatic iris to compensate for changes in lighting In addition to this feature you may further assist the system to maintain the best possible image quality by paying special attention to environmental lighting and background colors as described
22. also be shown on the display of the system 6 Press the Install button to start the software upgrade When the software upgrade is complete you need to click on the restart button and press OK to restart the system in order to activate the new software Once verified the system will reboot once more to complete the upload of all systems parameters kept from the old software revision 7 To verify that the new sw is installed refresh the page shown in figure1 after restart The Software Version should now show the new software version uploaded to the system The same information can also be found in the menu on the system under Control Panel System Information B Upgrading using FTP Copy the new software file to a folder on your harddisk for instance c software Open a DOS window and go to the folder where the new software is stored Type ftp lt ip address of the TANDBERG MXP system gt Type in the supplied Release Key as user RONDTE 167 TANDBERG COMPASS MXP UTILITY MXP 5 Type in your IP password default is TANDBERG as password 6 Type put lt software file name gt and press Enter The new software file will now be uploaded to the TANDBERG MXP system 7 When the software upload is complete end the ftp connection to the TANDBERG MXP system by typing bye in the DOS prompt 8 To exit the DOS window completely type exit 9 Restart the system to activate the new softwa
23. bandwidth key A restart of the system is required after entering a new option and or bandwidth keys If the key is invalid the original key will be used The following options are available 1 No option 2 Bandwidth options 71 TANDBERG COMPASS MXP UTILITY MXP 4 1 10 Date and Time Settings NTP IP This is the NTP time server address from which the system can get updated time information See IP Services for more details Auto The NTP IP address is set automatically Manual The NTP IP address is set manually IP Address The IP Address for obtaining the date and time information Time Zone Select the correct time zone for the location of your system Date Format Choose between DD MM YY MM DD YY or YY MM DD as the desired date format Time Format Select 12h or 24h time format Daylight Savings On Automatically adjust for daylight savings changes Off Do not adjust for daylight saving changes 72 4 Administrator Settings 4 1 11 Max Call Length This feature will automatically end both incoming and outgoing calls when the call time exceeds the specified Max Call Length Max Call Length can have the following values 0 999 minutes where 0 means off 73 TANDBERG COMPASS MXP UTILITY MXP 4 2 Menu Settings The menu settings are only available when Kiosk Mode is deactivated Menu Settings Input Editor Language Off k Menu Timeout In Call eof 20n Balloon Help eof O0n Administrator Pass
24. below Remember the system will send live images of yourself and your immediate surroundings Avoid direct sunlight on the subject matter i e yourself the background or onto the camera lens as this will create harsh contrasts f light levels are too low you may need to consider using artificial lighting As described above direct illumination of the subject matter and camera lens should be avoided When using artificial lighting daylight type lamps will produce the most effective results Avoid colored lighting Indirect light from shaded sources or reflected light from pale walls often produces excellent results Avoid harsh side lighting or strong light from above Strong sunlight from a window or skylight may put part or all of the subject matter in shadow or cause silhouetting H you still have problems with the iris and lighting manual adjustment of the camera parameters might help see Video Settings menu Dim scenes can also be improved by manually adjusting the camera brightness setting Background The appearance of the picture background is very important but easily overlooked It is important to remember that the camera also shows what is behind you when in a videoconference To ensure a Suitable background we recommend you consider the following Use aneutrally colored background with a medium contrast and a soft texture e g a plain curtain with no heavy patterns or strong colors that may adversely tint th
25. call press the central button on the Compass MXP cabinet to display the on screen menu then press the central button again to confirm the End Call selection How to end an Auto Answer call e If the handset has been used on either the Compass MXP or Utility MXP together with Auto Answer ON then replacing the handset will not end the call e Only the far end can end an Auto Answered call 28 3 General Use 3 10 Using the Handset The handset has different functions depending on the setup of the unit and depending on if the unit is outside or inside a call e When outside a call and with autodial activated lifting the handset will waken the system from standby mode and will start to dial through the names stored in My Contacts Replacing the handset onto the cradle will end the call e When outside a call and with autodial deactivated lifting the handset will waken the system and show the Kiosk Menu if activated otherwise self view will be shown Replacing the handset onto the cradle will have no consequence e When an incoming call is ringing on the system and with auto answer deactivated lifting the handset will accept the call Replacing the handset onto the cradle will end the call e When incoming call is ringing on the system and with auto answer activated lifting the handset after the call has been auto answered will switch between built in speaker A microphone and the handset Replacing the handset onto the cradle after an a
26. controlled by the handset and the five buttons located on the cabinet The system is not designed to be controlled by a remote control accessible to the user There is no remote control delivered with the Compass MXP System set up must be done via telnet or web interface Think of the remote control as a mobile phone with number keys and call keys Use the arrow keys and OK to navigate the menu The system s most commonly used functions are also accessible directly from the remote control The TANDBERG remote control TRC 3 1 Mic Off turns your microphone on and off 2 Arrow keys are used for navigation in the menu and for moving the camera when the menu is hidden see Navigation 3 Volume and adjusts the Codec volume only and not the monitor s volume 4 The Layout key toggles between full screen and different display layouts 5 Cancel takes you back one step in the menu system Use Cancel to delete characters in an input field see Navigation 6 Press the Call key to place a call see Place a Call 7 Camera presets define specific camera positions Move the camera to the desired position and press and hold a number key for 1 second to save the current camera position to that number key To activate a preset whilst in a call simply press and release that number key 8 Snapshot takes a snapshot of your video only while you are in a call 9 The Presentation key switches to a predefined presentation source If the
27. etc G 174 7 Glossary G 711 Audio algorithm for normal quality audio telephone quality 3 1 kHz The system will always have G 711 enabled G 722 Audio algorithm for high quality audio 7 kHz G 722 1 Audio algorithm for compressed high quality audio 7 kHz G 728 Audio algorithm for compressed normal quality audio telephone quality 3 1 kHz Gateway The gateway enables sites on IP and sites on ISDN to participate in meetings with each other Global Phone Book A phone book provided by TMS H H 261 Video algorithm for legacy video compression and decompression The system will always transmit H 261 H 263 Video algorithm for normal video compression and decompression H 264 Video algorithm for bandwidth efficient video compression and decompression Hardware serial number A unique number listed in the System Information menu to identify your system towards your TANDBERG representatives Humfilter A highpass filter which reduces very low frequency noise iCIF Interlaced CIF 352x288 pixels 50 fields per second Incoming call Someone calls in to your system Incoming MCU Calls If occupied in a call the system will provide a visual audio indication of an incoming call and ask to accept or reject the call IP address Defines the network address of the system This address is only used in static mode IP assignment IP address IP subnet mask and Gateway are assigned by the DHCP server IP assignment Static
28. for electronic products Production of products Our factories employ the most efficient environmental methods for reducing waste and pollution Our designers do their best to ensure TANDBERG products are highly recyclable Digital User Manuals TANDBERG is pleased to announce that it has replaced the printed versions of its User Manuals with a digital CD version Instead of a range of different user manuals there is now one CD which can be used with all TANDBERG MXP products The CD contains a variety of supported languages The environmental benefits of digital manuals are significant from saving paper to reduced weight for shipping Even the CD itself is recyclable Not only are they more ecological digital manuals are more user friendly A simple web based search feature helps users directly access the information they need In addition this TANDBERG video system now has an intuitive on screen help function which provides a range of useful features and tips If desired the user manuals on the CD can still be printed locally TANDBERG COMPASS MXP UTILITY MXP Operator Safety Summary For your protection please read these safety instructions completely before operating the equipment and keep this manual for future reference The information in this summary is intended for operators Carefully observe all warnings precautions and instructions both on the apparatus and in the operating instructions Warnings Water and moisture
29. for more information on Access codes On When making a call an Access Code dialog box will be shown The user must enter the correct password in order to put the call through Off No password is necessary to make a call Incoming Telephone Calls On The system will accept incoming telephone calls Off The system will not accept incoming telephone calls This is useful to prevent incoming calls from systems other than videoconferencing systems Far End Camera Control On The far end will be able to e Control your camera e Select your video sources e Activate your camera presets e Request snapshots Off The far end can access none of the four features above on the local system You will however still be able to control the camera on the far end 64 4 Administrator Settings Fallback to Telephony When dialing a number and the system fails to place a video call to the number dialed the system will attempt to place a telephone call if Fallback to Telephony is enabled On Enables falloack from video calls to telephone calls Off Disables fallback Far End ISDN System Upgrade It is possible to upgrade software remotely i e a far end system may upgrade software on a local system via http on ISDN The system to be upgraded must be configured to allow remote software upgrade It is possible to set a password which is needed for the far end system to be able to accomplish the software upgrade On The system will allow a re
30. is a picture layout mode that is optimized for wide screens Full screen 1 3 layout and emulated dual monitor layout Presentation Presentation means to show another video source Use the Presentation Key for a predefined presentation source Use the presentation menu to choose among all available video sources Presentation source The video source that is on display when you press the Presentation Key on the remote control Presets Predefined camera positions and video sources Q QCIF Quarter CIF 176x144 pixels QSIF Quarter SIF 176x120 pixels R Release Floor To end the request floor function release floor to site Allows the chairman to release the floor Remote Short for Remote Control Request Floor The MCU will broadcast the video in full screen to all other participants in the conference If the MCU conference has a chairman a request will be sent to the the chairman Restart Restarts the system Restore defaults Restores system settings to the factory defaults Restricted call A call to a 56 kbps network By default the system will dial an unrestricted call a call to a 64 kbps network and downspeed to 56 kbps if necessary 177 TANDBERG COMPASS MXP UTILITY MXP S VHS S video S video The standard camera uses one of the S video inputs in the codec Selfview Outgoing video In most cases the image of your self Serial number A unique number the hardware serial number listed in the System Inform
31. microphone output Ring earphone receiver input Sleeve common ground Headsets with the microphone positioned in front of the user s mouth connected to the earphone through a rod tend to give more echo than earbud headsets with the microphone attached to the cord TANDBERG recommends the Plantronics MX100 headset www plantronics com products mobile 144 5 Interfaces 5 1 3 Network Ethernet 1 x Ethernet RJ 45 Jack LAN interface 10 100 Mb up to 768kbps To connect the system to a LAN use the Ethernet cable provided by TANDBERG or a standard Ethernet cable The cable specification is Biles 2 3 3 6 6 If no LAN is available and the codec is connected directly to a computer use a crossover cable The crossover cable specification is l l gt N P g 3 d Aw 3 ee OF If such a connection is needed the system and the PC must use static TCP IP settings because no DHCP server is controlling the small LAN which has been created between the computer and the system When configuring a back to back connection between the PC and the system make sure both static IP addresses exist on the same subnet ISDN BRI Interface ISDN 1 420 RJ 45 Jack Basic Rate Interface S T 2B D 128 kbps per ISDN I F To connect the system to BRI use the ISDN cable provided by TANDBERG or a standard BRI cable The pinout of the S T interface is BRI Pinout Pin 3 TX Pin 4 RX
32. off button again to turn the microphone back on see Mic Off for details Volume Off This indicator is shown when the volume is turned off Press Volume to turn the volume back on see Volume and for details Secure Conference AES This double padlock indicator is shown when AES encryption Secure Conference is active see Security for details Secure Conference DES This padlock indicator is shown when DES encryption Secure Conference is active see Security for details Not Secure Conference This open padlock indicator is shown during the initialization phase for AES or DES encryption During this period the call is not secure see Security for details Warning This indicates that the system has detected a warning Select the icon and press OK to see details on the warning Please see Warnings for a list of possible warnings Bad Network This indicator appears if the system detects network anomalies like packet loss jitter etc during a call Open the menu by pressing the OK Menu button and select the warnings icon too see details TANDBERG COMPASS MXP UTILITY MXP 3 5 Using the Kiosk Menu Figure 3 5 Kiosk Menu Press the left right buttons on the Compass MXP to highlight the appropriate icon then press the central button to confirm selection The menu contains the following items e Place a Call e Volume e Close 24 3 General Use 3 6 Using the Language Menu To Sach amp kl UU
33. view in the industry Welcome menu The welcome menu displays the main menu when you are outside a call 179 TANDBERG COMPASS MXP UTILITY MXP XGA extended Graphics Array 1024 x 768 X 180
34. with a cart stand tripod bracket or table specified by the manufacturer or sold with the apparatus When a cart is used use caution when moving the cart apparatus combination to avoid injury from tip over Lightning Unplug this apparatus during lightning storms or when unused for long periods of time ISDN cables CAUTION To reduce the risk of fire use only No 26 AWG or larger telecommunication line cord Servicing Do not attempt to service the apparatus yourself as opening or removing covers may expose you to dangerous voltages or other hazards and will void the warranty Refer all servicing to qualified service personnel Damaged Equipment Unplug the apparatus from the outlet and refer servicing to qualified personnel under the following conditions When the power cord or plug is damaged or frayed f liquid has been spilled or objects have fallen into the apparatus If the apparatus has been exposed to rain or moisture If the apparatus has been subjected to excessive shock by being dropped or the cabinet has been damaged If the apparatus fails to operate in accordance with the operating instructions Contact us If you have any questions comments or suggestions please see the Online Support service at www tandberg net It is also possible to send a fax or mail to the attention of Product and Sales Support TANDBERG P O Box 92 1325 Lysaker Norway Tel 47 67 125 125 Fax 47 67 125 234 TANDBERG
35. 1 Unpacking The TANDBERG Compass MXP and Utility MXP consist of the following items Videoconferencing system with built in camera handset and lamp Remote Control Utility MXP only Batteries User Manual on CD Integrated power supply Cables High security keys 2 Installation TANDBERG COMPASS MXP UTILITY MXP 2 2 Connecting Cables 1 Power cable Connect the power cable from the wallplate to the power supply Note The connection of main electrical supply to the wallplate is described in the Installation Sheet 2 ISDN cables Connect the ISDN cables to the ISDN connectors on the system Connect the ISDN cables to the ISDN sockets S T interface provided by the service provider Your main number will be the number associated with the socket to which ISDN cable number 1 is connected North America The system does not have a built in network terminator If the wall socket provides an ISDN U interface an NT1 between the system and the ISDN line is needed see Appendix 8 for details Note Write down the numbers associated with each of the ISDN lines They are needed for configuring the system Figure 2 1 Connectors 3 LAN cable To use the system on LAN connect a LAN cable from the Ethernet connector on the system to the LAN 10 2 Installation 2 3 Monitor Configuration Power on Switch the system on by connecting the power cable from the wallpla
36. 1x wireless LAN is not supported 156 6 Appendices Appendix 6 Using the file system It is possible to access a file system within the TANDBERG system by using ftp DOS ftp lt IP address of system gt or window Web ftp lt IP address of system gt browser Description of the different files all prm all settings in the system including directory dir prm directory entries up to 200 entries event log logs fault situations etc sw pkg the system software globdir prm file containing up to 400 entries These entries can not be edited from the system but can be edited as a text file Custom logos Go to the folder where your logo is located Type ftp lt IP address of your local system gt Go to the user folder type cd user Upload the logo type put lt logo jpg gt The new logo will be displayed the next time you restart your system Recommended maximum size is 704x576 file format jpg If the file is too large no logo will be displayed 157 TANDBERG COMPASS MXP UTILITY MXP Appendix 7 Web Interface It is possible to access and maintain the system remotely via a local area network LAN using a standard Web browser Connect your system to a LAN with a Network cable How to configure your system for web interface 1 Open Administrator Settings and choose Network AN Settings Specify IP assignment DHCP or Static If DHCP is selected no other settings are needed If Static i
37. 3 Settings Advanced H 323 Settings IP Precedence Diffserv SNMP Settings Streaming Settings Network Profiles Security Data Port 1 Data Port 2 RS449 V 35 Compatible IP assignment IP address IP subnet mask Gateway Ethernet Speed E 164 Alias Use Gatekeeper Gatekeeper IP H 323 Prefix RSVP NAT NAT Address QoS Audio Video Data Signaling IP Type of Service TOS Audio Video Data Signaling SNMP Trap Hosti SNMP Trap Host2 SNMP Trap Host3 SNMP Community Address Address Port TTL Router Hops Streaming Source Allow Remote Start Announcements Video rate kbps Auto H 320 H 323 Network Profile 4 Network Profile 5 Network Profile 6 Encryption Encryption mode Baud rate Parity Databits Stopbits Mode Baud rate Parity Databits Stopbits Mode 48 3 General Use 3 16 6 IP Address Conflict Check The system will give a warning if there is an IP conflict The user may initiate this check by selecting IP Address Conflict Check 49 TANDBERG COMPASS MXP UTILITY MXP 3 16 7 Warnings If any warnings registered by the system it will be displayed in the Warnings menu Open a warning in the list to get more information about the warning Warnings ISDN PRI warnings 1 gt GR Figure 3 16 Warnings The following warnings are displayed if detected by the system ISDN BRI warnings ISDN is enabled on BRI line x but the line is not connected Pleas
38. 448p gt iCIF 50 gt CIF gt QCIF MOTION NTSC 400p gt 448p gt iSIF 60 gt iCIF 60 gt SIF gt CIF gt QCIF MOTION VGA CIF gt QCIF MOTION SVGA CIF gt QCIF MOTION XGA CIF gt QCIF MOTION Wide w448p gt w288p gt CIF gt QCIF SHARPNESS PAL 4CIF gt VGA gt CIF gt QCIF SHARPNESS NTSC ASIF gt 4CIF gt VGA gt SIF gt CIF gt QCIF SHARPNESS VGA VGA gt 4CIF gt CIF gt QCIF SHARPNESS SVGA SVGA gt XGA gt 4CIF gt VGA gt CIF gt QCIF SHARPNESS XGA XGA gt SVGA gt 4CIF gt VGA gt CIF gt QCIF SHARPNESS Wide w720p gt w576p gt w448p gt w288p gt CIF gt QCIF Table 4 Transmission mode with Motion or Sharpness selections 4 4 5 2 Native Resolutions The following live video resolutions are supported on the system Native NTSC ASIF 704 x 480 pixels Digital Clarity 400p 528 x 400 iSIF 352 x 480 pixels Natural Video SIF 352 x 240 pixels 101 TANDBERG COMPASS MXP UTILITY MXP Native PAL 4ACIF 704 x 576 pixels Digital Clarity 448p 576 x 448 iCIF 352 x 576 pixels Natural Video CIF 352 x 288 pixels QCIF 176 x 144 pixels SQCIF 128 x 96 pixels Native PC Resolutions XGA 1024 x 768 pixels Digital Clarity SVGA 800 x 600 pixels Digital Clarity VGA 640 x 480 pixels Digital Clarity Wide 16 9 Resolutions w288p 512 x 288 pixels w448p 768 x 448 pixels w576p 1024 x 5
39. 64 An Offer Answer Model with the Session Description Protocol SDP RFC 3263 Session Initiation Protocol SIP Locating SIP Servers No support for NAPTR records RFC 3311 The Session Initiation Protocol SIP UPDATE Method RFC 2976 SIP INFO Method Draft levin mmusic xml media control 03 txt Used for video fast picture update requests RFC 3361 Dynamic Host Configuration Protocol DHCP for IPv4 Option for Session Initiation Protocol SIP Servers RFC 3550 RTP A Transport Protocol for Real Time Applications RFC 2032 RTP Payload Format for H 261 Video Streams Draft ietf avt rfc2032 bis 06 txt Draft for advanced video signaling including resolution and mpi 130 4 Administrator Settings RFC 2190 RTP Payload Format for H 263 Video Streams RFC 2429 RTP Payload Format for the 1998 Version of ITU T Rec H 263 Video H 263 Draft ietf avt rfc2429 bis 05 txt Draft for advanced video signaling including resolution mpi annexes and custom formats RFC 3047 RTP Payload Format for ITU T Recommendation G 722 1 RFC3581 An Extension to the Session Initiation Protocol SIP for Symmetric Response Routing RFC3984 RTP Payload Format for H 264 Video RFC3016 RTP Payload Format for MPEG 4 Audio Visual Streams Media Capabilities supported in SIP Audio PCMU G 711 u law PCMA G 711 a law G 722 64 kbps G722 1 24kbit G 722 1 32 kbps Video H 261 QCIF 1 30 CIF 1 30 H 263 SQCIF 1 30 QCIF 1 30 CIF 1 30 4CIF
40. 76 pixels w720p 1280 x 720 pixels Note that the TANDBERG 550 MXP the TANDBERG 1000 MXP and the TANDBERG Compass Utility MXP do not transmit the following video formats 448p 400p iCIF iSIF w288p w448p w576p and w720p 102 4 Administrator Settings 4 4 6 Default Call Settings The system will use the Default Call Settings when making a call In addition to the Call Type Net Bandwidth and Restrict 56k you also find settings for H 320 Auto bandwidth and H 323 Auto bandwidth in Default Call Settings Call Type Network 103 Call Type can be set to Video Call Telephone Call If either the Call Type is set to Telephone Call or the Place Telephone Call icon is selected when making a call the call will be set up as a telephone call In all other cases the call will be set up as a video call Some network configurations may cause the setup of a video call to fail The call will then be set up as a telephone call instead if Fallback to Telephony is enabled The Network alternatives are Auto ISDN H 323 SIP If Auto is selected the system will select the right network depending on the entered number If an IP address e g 10 12 34 56 is entered H 323 is selected f the first digits in the number match those set in H 323 Prefix H 323 is selected In other cases ISDN H 320 is selected ISDN indicates ISDN BRI If a gatekeeper is present it is possible to place IP ca
41. AES The system will try to use AES with 128 bits encryption when setting up calls If AES is not supported by the other site s no other type of encryption will be initiated DES The system will always try to set up the call using DES with 56 bits encryption on ISDN and IP If all other sites do not support DES no other type of encryption will be initiated Both AES and DES Encryption are supported for mixed ISDN IP calls In addition AES and DES Encrypted sites can be connected at the same time 115 TANDBERG COMPASS MXP UTILITY MXP 4 7 3 Passwords Administrator Password IP Access Password Streaming Password VNC Password Access Code and Remote Software Upgrade password are duplicated from their respective menus Using the Security menu gives you a quick way to change all passwords of the system 116 4 Administrator Settings 4 8 Network The network setting is only available when Kiosk Mode is deactivated Network ZB LAN Settings Network Profiles Gi Figure 4 20 Network settings menu The network menu contain ISDN BRI Settings LAN Settings Network Profiles 117 TANDBERG COMPASS MXP UTILITY MXP 4 8 1 ISDN BRI Settings To make sure your system will work properly using ISDN BRI make the following settings 1 Set ISDN switch type 2 Enter ISDN line numbers SPIDs if required 3 Disable unused lines Some software versions do not support 6 ISDN lines therefore so
42. Codes do not match this would indicate that the call has been exposed to a Man In The Middle attack When a system with MultiSite functionality hosts a conference the highest possible encryption algorithm will be negotiated on a site by site basis MultiSite conferences can therefore support a mix of AES and DES encrypted endpoints in the same conference A conference will only be as secure as its weakest link 155 TANDBERG COMPASS MXP UTILITY MXP All systems supporting DES encryption can upgrade to AES encryption Please contact your TANDBERG representative for more information The standards supporting the encryption mechanisms employed by TANDBERG are AES DES H 233 H234 and H 235 H235v3 amp v2 for backwards compatibility with extended Diffie Hellman key distribution via H 320 H 323 and Leased Line connections The TANDBERG AES implementation is validated as conforming to the Advanced Encryption Standard AES Algorithm as specified in Federal Information Processing Standard Publication 197 Advanced Encryption Standard by The National Institute of Standards and Technology NIST IEEE 802 1x EAP Extensible Authentication Protocol This is a standard for authentication and authorization of units systems onto the network Static configuration System ID and Password Anonymous ID for encryption challenge Enable methods Supported methods MD5 simple challenge PEAP encrypted channel TTLS Note that 802
43. Do not operate the equipment under or near water for example near a bathtub kitchen sink or laundry tub in a wet basement or near a swimming pool or in areas with high humidity Cleaning Unplug the apparatus from the wall outlet before cleaning or polishing Do not use liquid cleaners or aerosol cleaners Use a lint free cloth lightly moistened with water for cleaning the exterior of the apparatus Ventilation Do not block any of the ventilation openings of the apparatus Install in accordance with the installation instructions Never cover the slots and openings with a cloth or other material Never install the apparatus near heat sources such as radiators heat registers stoves or other apparatus including amplifiers that produce heat Grounding or Polarization Do not defeat the safety purpose of the polarized or grounding type plug A polarized plug has two blades with one wider than the other A grounding type plug has two blades and a third grounding prong The wide blade or third prong is provided for your safety If the provided plug does not fit into your outlet consult an electrician Power Cord Protection Route the power cord so as to avoid it being walked on or pinched by items placed upon or against it paying particular attention to the plugs receptacles and the point where the cord exits from the apparatus Attachments Only use attachments as recommended by the manufacturer Accessories Most systems should only be used
44. L video input SIF from NTSC w288p from wide format HD720p input VGA SVGA XGA from PC Digital Clarity At high bit rate 448p will be used from a PAL video input if Natural Video is Off or Auto or if Natural Video is x kbps and the bit rate is lower than x kbps 400p from NTSC if Natural Video is Off or Auto or if Natural Video is x kbps and the bit rate is lower than x kbps CIE will be used from a PAL video input if Natural Video is x kbps and the bit rate is higher than or equal to x kbps GIE from NTSC if Natural Video is x kbps and the bit rate is higher than or equal to x kops w448p will be used from a wide format HD720p input VGA SVGA XGA from PC Digital Clarity 100 4 Administrator Settings Sharpness Improved quality of detailed images and graphics lower frame rate ideal for enhancing quality at lower bandwidths 4CIF will be used from a PAL video input Digital Clarity 4SIF from NTSC Digital Clarity w720p will be used from a wide format HD720p input VGA SVGA XGA from PC Digital Clarity IVM Resolution The following table shows relationship between Transmission modes selected by the system when Motion or Sharpness is set in the Call Quality menu IVM will use this table to optimize the Video quality according to the capabilities of the remote system s Basic Video Video Input Transmission mode selection rules Quality MOTION PAL
45. NDBERG supports DVI D Single Link DVI A and DVI I Single Link format cables DVI D cables transmit digital T M D S signals DVI A cables transmit analog VGA signals and DVI I cables can transmit either digital or analog signals It is possible to extend existing DVI cables by the use of extension cables The maximum cable length however is 5 meters Going beyond that may result in quality loss Pin Signal Pin Signal Pin Signal Assignment Assignment Assignment 1 T M D S 9 T M D S 17 T M D S Data0 Data2 Data1 2 T M D S 10 T M D S 18 T M D S Data0 Data2 Data1 3 T M D S 11 T M D S 19 T M D S Data2 4 Shield Data1 3 Shield Data0 5 Shield 4 T M D S 12 1T M D S 20 T M D S Data5 Data4 Data3 5 T M D S 13 1 M D S 21 T M D S Data5 Data4 Data3 6 DDC Clock 14 5V Power 22 T M D S Clock Shield 7 DDC Data 15 Ground return 23 1 M D S Clock for 5V HSync and VSync 8 Analog Vertical 16 Hot Plug Detect 24 T M D S Clock Sync C1 Analog Red C2 Analog Green C3 Analog Blue C4 Analog C5 Analog Ground Horizontal analog R G amp Sync B return Table 7 DVI I Combined Analog and Digital Connector Pin Assignments 143 TANDBERG COMPASS MXP UTILITY MXP 5 1 2 Audio All audio inputs are active by default For further information refer to chapter Audio Headset 1 headset connector 2 5mm 3 pole mini jack d Sleeve compte ground uo The headset plug must have the following configuration Tip
46. Ontrol PANG ccscevseecsis tevecneveasersentewdensvtencetets EE eege S edd secher 39 LR ele ne A0 S Systemi Jotoreten ees Ae eege ee deed baaa gedd eege enee aa 41 3 16 22 Channel Stats rsss seno anaandaa ae aaa ena aaaea kaia aiia aAa 42 3 16 39 Call Status sccciccl seccsveteecescrbeceesbetenc stunt vetatentereesert edeateveasdtcchs doa aae iaaa aAA aa 43 3 164 System Zelter nenn enanada ae aasa adaa aaa kaia aiiai 44 3 16 5 View Administrator Settings ccccccceceeeeeeeeeeeeeeeceeeeeeeaeeeeeaeeeeeeeseaeeesaeseeeeseeeeeeas 45 3 16 6 IP Address Conflict Check 49 WEE WANING eeeer eer Segoe eege e degt 50 DE Text Ohal siant etanse aaan a Eed KEE dees 52 3 16 9 Administrator Settings eee cece ceeeee cece ee eeeeeeeae scenes seaeeeseaeeseaeeseeeesaeeeeaeseeneeeeas 53 3 16 10 EEE a eege Dave penta eege eege ER deaniaadbesavaddeceasate reasialedannnadianas 54 3 16 11 UE UE 55 Administrator Settings ccccecceeceeeceeeceeeeaeeeeeeeeeeeeseaeeeeaae scenes saeeesaaeeseaeeseeeescaeeseaeseeneeseas 56 4 1 General Settings eeccccc cece ceeneeeeeeee eae eeeeaeeaeeeceaeeeeaaeseeeeeseeeeeseaeseeaaesgeeeeseaeeseaeeeeaeeeeeeeees 57 4 1 1 Ee ae U E 58 AKTE 59 4 1 3 International Name 60 E AUTO BEE 61 4 1 5 Phone Book Settings cccccecccceeeceeeeeeeeceeeeeeeaeeeeaaeeeeeeesaeeeeaaeseeeeeseaeeesaeeseaeeeeeeeess 62 4 1 6 External Services Settings cccccccceeeesceceeeeeceeeeeeeae scene
47. Press Mic Off to switch the microphone on Off You must manually answer all incoming calls by pressing OK or the Call key 61 TANDBERG COMPASS MXP UTILITY MXP 4 1 5 Phone Book Settings Corporate Directory On The Corporate Directory is available in the menu Off The Corporate Directory is hidden from the menu and is unavailable for users IP address Enter the IP address of the management system that provides the Phone Book Path The Path indicates the function of the management system 62 4 Administrator Settings 4 1 6 External Services Settings External Services On When set to On External Services are available Off When set to Off External Services are unavailable IP address Enter the IP address of the service provider for External Services Path Enter the Path to the External Services provider The services available are defined by the service provider 63 TANDBERG COMPASS MXP UTILITY MXP 4 1 7 Permissions Permissions contains settings for incoming telephone Calls Far End Control Remote Software Upgrade and Fallback to Telephony Access Code An access code will help you control the use of the system All users must enter a code to identify themselves and the call will be charged on their account Access Codes are handy for group systems where there are more users or divisions that share the costs of using the system Access Code can be set to On and Off Please refer to section Appendix 5
48. TANDBERG Compass Utility MXP User Manual Software version F4 D13865 01 This document is not to be reproduced in whole or in part without permission in writing from TANDBERG COMPASS MXP UTILITY MXP Trademarks and Copyright All rights reserved This document contains information that is proprietary to TANDBERG No part of this publication may be reproduced stored in a retrieval system or transmitted in any form or by any means electronically mechanically by photocopying or otherwise without the prior written permission of TANDBERG Nationally and internationally recognized trademarks and trade names are the property of their respective holders and are hereby acknowledged This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit Copyright 1998 2002 The OpenSSL Project All rights reserved This product includes cryptographic software written by Eric Young Copyright 1995 1998 Eric Young All rights reserved Contains iType from Agfa Monotype Corporation AGFA Monotype ICU License ICU 1 8 1 and later COPYRIGHT AND PERMISSION NOTICE Copyright c 1995 2003 International Business Machines Corporation and others All rights reserved Disclaimer The information in this document is furnished for informational purposes only is subject to change without prior notice and should not be construed as a commitment by TANDBERG The information in this document is believed t
49. The system will use a gatekeeper to make a H 323 call CallManager The system will use a CallManager to make a H 323 call H 323 Prefix When dialing a number prefixed with digits specified by H 323 Prefix and with Net Auto an H 323 call will be placed Example H 323 Prefix is 555 Dialing 55582 with Net Auto will select LAN 124 4 Administrator Settings Gatekeeper Settings Gatekeeper Discovery Auto The system will automatically try to register on any available gatekeeper If a gatekeeper responds to the request sent from the codec within 30 seconds this specific gatekeeper will be used This requires auto discovery on the gatekeeper as well If no gatekeeper responds the system will not use a gatekeeper for making H 323 calls and hence an IP address must be specified manually Manual The system will use a specific gatekeeper identified by Gatekeeper IP address Gatekeeper IP Address This is the gatekeeper IP address that is used if you specify H 323 Call Setup Gatekeeper and Gatekeeper Discovery Manual Note that if your system is part of a TANDBERG Expressway firewall traversal solution and is placed outside the firewall you should register the IP address of your Border Controller as the Gatekeeper IP address and set H 323 Call Setup to Gatekeeper Authentication Mode Auto If Authentication Mode is set to Auto and the gatekeeper indicates that it requires authentication the endpoint will automaticall
50. Utility MXP it is possible to close the camera for privacy by sliding across a door Monitor The Digital LCD displays the far end videoconferencing site in addition to the menu Codec The codec is the heart of the system Its main task is the compression of outgoing video audio and data the transmission of this information to the far end and the decompression of the incoming information the name codec comes from a combination of the two words compression and decompression Figure 1 1 TANDBERG Utility MXP and Compass MXP Microphone The microphone is integrated and located at the edge on the left hand side of the unit Handset For privacy both Utility MXP and Compass MXP are delivered with a handset located on the right hand side of the unit Lifting the handset from the cradle automatically toggles between internal microphone loudspeaker and the handset Lamp ALED light emitting diode lamp is integrated into the top of the unit and gives optimally directed additional illumination to the users face This improves the quality of the image transmitted to the TANDBERG COMPASS MXP UTILITY MXP far end The power output of the lamp can be varied upon installation or by service personnel thereafter and can be adjusted from zero to full power Remote Control The remote control is only delivered with the TANDBERG Utility MXP The remote control is located inside the locked cabinet on the Utility MXP and is in
51. XP Appendix 9 Remote Control TRC 3 The TANDBERG remote control transmits IR signals using the following parameters Protocol Siemens SDA2208 Reference frequency 485kHz Address 4 amp 7 IR wavelenght 940nm IR carrier ferquency 30kHz 160 6 Appendices Remote Control keycode map Button codes Remote control Button codes Remote Conirol Decimal Hex Address Button name Decimal Hex Address Button name 0 00 33 21 0 OK 1 01 0 NUMBER 1 34 22 0 CALL 2 02 0 NUMBER 2 35 23 0 END CALL 3 03 0 NUMBER 3 36 24 0 PHONE BOOK 4 04 0 NUMBER 4 37 25 0 MENU 5 05 0 NUMBER 5 38 26 0 CANCEL 6 06 0 NUMBER 6 39 27 0 7 07 0 NUMBER 7 40 28 0 PRESETS 8 08 0 NUMBER 8 41 29 9 09 0 NUMBER 9 42 2A 10 OA 0 NUMBER 0 43 2B 11 0B 0 3 44 2C 12 OC 0 45 2D 13 OD 46 2E 14 OE 47 2F 15 OF 48 30 16 10 49 31 17 11 PRESENTER 50 32 18 12 0 51 33 19 13 52 34 20 14 53 35 21 15 54 36 22 16 0 ZOOM OUT 55 37 23 17 0 ZOOM IN 56 38 24 18 57 39 25 19 0 VOLUME 58 3A DOWN 26 1A 0 VOLUME UP 59 3B 27 1B 0 MIC OFF 60 3C 28 1C 61 3D 29 1D 0 UP 62 3E 30 1E 0 DOWN 63 3F 0 WAKE UP 31 1F 0 LEFT 25 19 3 LOW BATT 32 20 0 RIGHT XX 3 PROG VER 161 TANDBERG COMPASS MXP UTILITY MXP Appendix 10 Cisco CallManager registration Configuring an H 323 client on the CallManager 4 0 The registration of a H 323 client in CallManager is supported on the CallManager CCM 4 0 software and forward Ts 2 6 To configure the CallManager with an H 323 client
52. XP UTILITY MXP 3 16 10 Restart The restart is only available when Kiosk Mode is deactivated Restart the system by pressing the Restart button You are prompted with a dialog box saying Do you want to restart the system Press OK to restart press Cancel X to abort Restart Do you want to restart ri X Cancel Figure 3 17 Restart 54 3 General Use 3 16 11 User Guide The user guide is only available when Kiosk Mode is deactivated The on screen user guide takes you through a quick step by step introduction to videoconferencing It gives the user basic skills in how to use the system User Guide RK Using the a How to Using Remote Control Make a Call Phone Book G A EAE ae Camera Presentation Using Confere ei Using Camera TANDBERG Services Presets MXP a Figure 3 18 User Guide 55 TANDBERG COMPASS MXP UTILITY MXP 4 Administrator Settings The administrator settings are only available when Kiosk Mode is deactivated Administrator Settings L Genera CU Menu Settings C Presentation Settings gt Call Quality GI Audio E Video 7 A Security Kl Network ei Restore Default Settings Figure 4 1 Administrator settings menu Administrator Settings contain all the settings of the system Making changes to Administrator Settings will change the behavior of the system It is recommended to password protect the access to Administrator Settings
53. agement Application will contain information about the IP address and the service WEB Telnet FTP being used for the attempt If TMS is used email notifications or alarms about the attempt can be sent to specified persons Encryption All TANDBERG systems support both AES and DES encryption By default this feature is enabled such that when connecting with any other video system or MCU a TANDBERG system will attempt to establish a secure conference using AES or DES encryption The TANDBERG system will attempt this for both IP and ISDN connections Where a remote system or MCU supports encryption the highest common encryption algorithm will be selected on a port by port basis The type and status of the encryption negotiated is indicated by padlock symbols and on screen messages Encryption on the TANDBERG systems is fully automatic and provides clear security status indicators An open padlock indicates that encryption is being initialized but the conference is not yet encrypted Single padlock indicates DES encryption Double padlock indicates AES encryption In addition to on screen indicators the Call Status menu provides two information fields regarding call encryption The first field is the Encryption Code which will identify either AES or DES The second field is the Encryption Check Code and is comprised of an alphanumeric string This string will be the same for systems on either side of an encrypted conference If the Check
54. answered by pressing the central button 29 TANDBERG COMPASS MXP UTILITY MXP subsequent lifting of the handset will switch between speaker mode and handset mode and replacing the handset will not end the call Alternative Compass example Settings Auto answer is OFF and Auto dial is OFF Lifting the handset outside a call will wake up the system and you will see self view and the Kiosk menu on the screen Thereafter replacing the handset will make no change 30 3 General Use 3 11 Standby The system will automatically go to Standby mode when it is not in use In standby mode the screen and LED lamp are black It is however still possible to receive incoming calls How to turn off the standby mode When the system is in standby pick up the handset on Compass MXP and Utility MXP or press any of the buttons on the Compass MXP to activate the system again The standby mode of the system should be used if the system is to be left idle 31 TANDBERG COMPASS MXP UTILITY MXP 3 12 Phone Book My Contacts The Phone Book My Contacts is a list of contacts that can be stored locally on the system Within the normal operating mode outside of Kiosk Mode the list is known as My Contacts and within Kiosk Mode it is represented only as a list on the Make a Call screen The list of numbers within My Contacts is available for both Auto Dial if activated and for ringing via the Make a Call menu only possible on the Compass
55. ation menu to identify your system towards your TANDBERG representatives Side by Side Side by side view means that two pictures are displayed side by side each other on the screen You will se two equally sized pictures SIF Standard Input Format 352x240 pixels SNMP Simple Network Management Protocol SNMP Community SNMP Community names are used to authenticate SNMP requests SNMP requests must have a password in order to receive a response from the SNMP agent in the system The SNMP Community name is case sensitive SNMP Trap Host Identifies the IP address of the SNMP manager SNMP traps Generated by the agent to inform the manager about important events SoftMux Ensures high reliability and includes the unique Downspeeding feature It also makes it possible to dial to another videoconferencing equipment phones and mobile phones in a uniform way and provides an on screen real time feedback on the progress of a call Split Screen All the participants in a MultiSite conference are displayed on the screen Former Continuous Presence Start Channel Indicates the firstE1 T1 channel the system is allowed to use The setting might be used when if the E1 T1 line is shared with other equipment Start up video source The video source that is on display when the system wakes up from standby mode Status Format Provides call quality feedback on the status line Streaming Allows broadcasting of audio video via an IP network St
56. ave them displayed on the screen when they are sent or received The snapshots will be sent and received but not displayed With Auto Display Snapshot set for Manual you must enter the Presentation menu to display a snapshot Auto A sent or received snapshot will automatically be displayed on the screen Manual A sent or received snapshot will not be displayed on the screen To see the snapshot choose Display Snapshot in the Presentation menu 91 TANDBERG COMPASS MXP UTILITY MXP 4 3 7 PIP Appearance A Picture in Picture PIP is a smaller picture placed in one of the corners of the screen The PIP enables you to see an extra picture in your video conference Auto PIP Auto means that Picture In Picture will appear automatically when it is suitable A picture in picture is nice when you use Duo Video and you need an extra window to see all the pictures You can of course show or hide the PIP with the Layout button on the remote anytime On PIP On means that a Picture in Picture will always be displayed Off PIP Off means that PIP is not displayed automatically 92 4 Administrator Settings 4 3 8 PIP Placing PIP Placing lets you decide where the PIP shall appear You can of course move the PIP with the Layout button on the remote anytime Top Right PIP is placed in the Top Right corner Bottom PIP is placed in the Bottom Right corner Right Bottom PIP is placed in the Bottom Left corner Left Top Left PIP is placed i
57. aximum 5 digits long The Administrator Password dialog box will pop up when you choose Administrator Settings from the Control Panel This will prevent occasional users from going in to administrator settings With an administrator password you can ensure that your system will behave in the same way every time and that only approved people are allowed to make changes to the system 78 4 Administrator Settings 4 2 5 Kiosk Mode Settings Kiosk Mode In Kiosk Mode the system is set to a simplified state where it can be controlled with just the four arrow keys and OK You will get a simplified on screen menu with only basic functionality available make calls using predefined contacts in the phone book receive calls end calls adjust volume Note that deactivating the Kiosk Mode is only possible through the web interface telnet or data port or by pressing 5 times on the Phone Book symbol then once on the number 3 Using Kiosk Mode Outside a call the Welcome Menu will be displayed Figure 4 12 Place a Call Volume and Close 79 TANDBERG COMPASS MXP UTILITY MXP In a call the system will display Far End video in full screen If Max Call Length is set to a value and the system is in a call the system will display a warning when it is 5 minutes 1 minute and 10 seconds left of the call If pressing OK when the system is in a call the following menu will be displayed End Call Volume and Close The following
58. bottom of the IP setting menu Changes in IP Settings menu will not have any effect until the system is restarted IP Protocol IPv4 IP version 4 supported IPv6 IP version 6 supported IP Address IP Subnet Mask and Gateway will be disabled Both Both IP version 4 and IP version 6 supported IP assignment DHCP Dynamic Host Configuration Protocol can be selected when a DHCP server is present Note that for IPv6 DHCP is used for NTP DNS Server Addresses DHCP IP address IP subnet mask and Gateway are not used because the DHCP server assigns these parameters Static The system s IP address IP subnet mask and Gateway must be specified in the IP address field IP address IP address defines the network address of the codec This address is only used in static mode In DHCP mode the assigned IP address can be found on the Welcome Menu IP subnet mask P subnet mask defines the type of network This address is only used in static mode Your LAN administrator will provide the correct value for this field Gateway When using DHCP the default gateway will be set automatically If the LAN utilizes static IP addresses IP address subnet mask and default gateway must be specified by the LAN administrator 121 TANDBERG COMPASS MXP UTILITY MXP Ethernet Speed Auto The codec will auto detect the speed duplex on the LAN 10 Half The codec will connect to the LAN using 10Mbps speed Half Duplex 10 Full 10 Mbps speed F
59. cccecceeseeceeeeeeeaeeeeeaeeeeeeeceaeeeeaaeseeneeeeeeeesaeeeeaaesseneesas 107 4 5 2 Alert Tones and Volume REENEN EEN 108 FONIO EE 109 4 6 1 MCU Status EI servi EAT A chacthetteeieceesber eeeratieees 110 46 2 Eeer 111 4 6 3 VUE Ou 112 4 T SOCUMILY EE 113 4 7 1 SNE Kee EE 114 4 7 2 Encryption MOG ifececetcesceticoceciecnetoexs sega T ES AEAT licks REES REES 115 4 7 3 PASSWOMGS EE 116 KEE 117 4 8 1 ISDN BRI Setting S EE 118 Ee LAN SettinQs rst E E avi AER berenetieed 120 4 8 3 Network Prona arri aara di eege egenen en eg Eege iere EEEE EE 139 4 8 4 Restore Default Settings cccecececseeceeeeeceeeeeeeee scenes cae eeseaeseeeeeseeeesaeeeeeeseeeees 140 NWOT ACS EE 141 5 1 1 VUE 142 NGA AUDIO EEEE E TEE T E E T TEA 144 5 1 3 ENEE 145 ale lee 146 GOSS EE 172 TANDBERG COMPASS MXP UTILITY MXP TANDBERG Compass Utility MXP 1 Introduction 1 Introduction The TANDBERG Compass MXP provides essential video features for face to face communication in public areas with the quality and reliability found in all TANDBERG equipment The TANDBERG Utility MXP provides essential video features for face to face communication in rugged environments with the quality and reliability found in all TANDBERG equipment Audio Quality High performance audio provides a richer more complete visual communication experience The MPEG4 AAC LD standard is used to provide true standards based CD quality stereo audio NEW Eliminate disturbance f
60. ct to My Contacts function is available from the Last Number Dialed Missed Calls Call History and Global Contacts folders see Phone Book for details It may be wise to copy contacts that are often used to My Contacts Note that the local copy will not be updated if the Global Contacts are updated from the management system How to copy a contact from the Global Phone Book to the Local Phone Book 1 Select the contact to be copied to My Contacts 2 Press the left arrow on the remote control followed by the down arrow until the Copy Contact to My Contacts icon is selected A message box telling that the operation was successful will be displayed 36 3 General Use 3 13 Camera Control The camera on the TANDBERG Compass MXP and Utility MXP is fixed and cannot be controlled by the user The focus is pre adjusted from the factory to suit a normal face to face call No user adjustment is possible 37 TANDBERG COMPASS MXP UTILITY MXP 3 14 Dual Stream DuoVideoTF H 239 Dual Stream is standard on the Utility MXP and Compass MXP H 239 is the new ITU standard defining how to send two video sources simultaneously With Dual Stream you have the opportunity to receive two different live video streams simultaneously main video and one additional source This is handy when receiving a presentation You see the live presentation and the live video of the presenter simultaneously When the far end discontinues the Dual Stream the Utilt
61. d is the password needed for 802 1x authentication EAP MD5 On The EAP MD5 protocol is enabled Off The EAP MD5 protocol is disabled EAP_TTLS On The EAP_TTLS protocol is enabled Off The EAP_TTLS protocol is disabled EAP PEAP On The EAP_PEAP protocol is enabled Off The EAP_PEAP protocol is disabled Note that 802 1x wireless LAN is not supported 138 4 Administrator Settings 4 8 3 Network Profiles This menu consists of 7 network profiles a prefix can be added for each profile If you add a prefix to a profile this prefix will automatically be added in front of the number being dialed Example 0 is added as a Call Prefix to the 2nd profile ISDN If you enter 12345678 in the dial menu and select ISDN the number dialed will be 012345678 Using the three last profiles you can enter the name of a profile prefix and network selection This is useful if you have a fixed prefix for your service provider 139 TANDBERG COMPASS MXP UTILITY MXP 4 8 4 Restore Default Settings Restore Default Settings will restore all administrator settings Note that this will not affect your Call Directory information Network Type Line Setup numbers or your SPID numbers Note that when holding the headset speaker button while turning on the power and while the notification lamp is flashing it is possible to press The number button 1 to restore default values The number button 2 to reformat flash disk The number b
62. d on PAL systems 98 4 Administrator Settings 4 4 4 Max Upstream Rate kbps The Max Upstream Rate kbps defines the desired maximum transmitted call rate This is to be able to limit the outgoing bandwidth whilst keeping the maximum incoming bandwidth especially useful for home offices with different upstream and downstream rates typically ADSL 99 TANDBERG COMPASS MXP UTILITY MXP 4 4 5 Video Quality The different video sources need different Video Quality Settings Main Camera VCR AUX and Split Screen have Motion as default PC Document Camera and VNC have Sharpness as default Motion Optimized for smooth motion video CIF SIF for low bandwidths iCIF iSIF for high bandwidths Sharpness Optimized for sharp video 4CIF 4SIF SVGA XGA Auto The system chooses the best of Motion or Sharpness depending on picture layout and bandwidth 4 4 5 1 Intelligent Video Management IVM It is possible to configure the picture sent from the system depending upon specific requirements and applications adding an additional level of flexibility and adaptability Generally the IVM will always try to transmit the format closest to the video input format Each video input can be configured to either motion or sharpness Motion When there is a need for higher frame rates typically when a large number of participants are present or when there is a lot of motion in the picture At low bit rate CIF will be used from a PA
63. default This means that you will start Dual Stream a second video stream automatically when starting a presentation Dual Stream requires the Presenter Option and H 263 video To check which options are installed see the System Information menu in Control Panel Manual means that you manually choose if you want to start Duo Video or not every time you start a presentation Auto Dual Stream starts automatically when you start a presentation in other words when you choose a second video source If your system or the far end system is not capable of Duo Video H 239 you will not use Dual Stream but rather send the presentation source as your Main Video Manual When starting a presentation select Presentation in the call menu and select Start Presentation Choose a video source from the list displayed on the screen 86 4 Administrator Settings 4 3 2 H 239 H 239 supports transmission of two video streams It combines elements of Duo Video and People Content If H 239 is disabled you will still be able to start TANDBERG Dual Video Stream Enabled Enables H 239 Disabled Disables H 239 The TANDBERG 550 MXP can only receive Dual Video Stream 87 TANDBERG COMPASS MXP UTILITY MXP 4 3 3 Startup Video Source The Startup Video Source is the video source on display when the system wakes up from standby mode If you use Main Camera as start up source the system will start with Main Camera every time the system wakes up from s
64. devices or to telephone add on hybrids Audio input 6 Intended for connection to a VCR or DVD player or other external playback devices Audio out 1 Intended for connection to TANDBERG Natural Audio televisions or audio amplifiers Audio out 2 Intended for connection to audio recording equipment or to a telephone add on hybrid Audio out 3 Intended for connection to a VCR or other recording equipment Auto display snapshot Sent and received snapshot will automatically appear on full screen display Auto answer The system will automatically answer all incoming calls Automatic Duo Video Duo Video Mode is put to Auto When starting a presentation Duo Video will start automatically if possible 172 7 Glossary B Bandwidth Decides the quality of the video call High bandwidth gives high quality C Call Control Data Triggered Uses TxData RxData and clock signals only Use Data Triggered when no handshake signal is available Call control Leased Line Is a non dialing protocol and should be used when two systems are connected in a point to point connection Use Leased Line when the handshaking signals DTR and CD are available Call control Manual Should be used when no handshake signals are available and the external equipment requires a constantly connected line Call control RS366 Dialing The only dialing protocol and would normally be used together with network clocking RS449 V35 Compatible when the e
65. dicated to the main camera and will not be available in standard configuration DES Encryption Data Encryption Standard DHCP Dynamic Host Configuration Protocol 173 TANDBERG COMPASS MXP UTILITY MXP Diagnostics Allows testing of individual system components and displays the current system settings Digital ClarityTF Participants enjoy presentations of exceptionally high quality resolution video Disconnect site As a Chairman you get the option Disconnect site Disconnect site allows you to disconnect any participant in the conference Do Not Disturb When Do Not Disturb is active the system will not accept any incoming calls The caller will hear a busy tone when calling the unit Document Camera A document camera is an additional camera that is used for showing text diagrams as well as physical objects DownspeedingTF If channels are dropped during a videoconferencing session the connection is automatically maintained without interruption dual monitor The second monitor Dual monitor system A videoconference system with two monitors Duo VideoTF Allows participants at the far end to simultaneously watch a presenter on one screen and a live presentation on the adjoining screen E E 164 Alias The E 164 address of the system Equivalent to a telephone number sometimes combined with access codes The system will not register with the gatekeeper if the E164 alias is not set E1 Network type 30 channels Defau
66. dio algorithms Automatically preferred audio algorithms on call rates up to and including 192kbps 1 G 722 1 24kbps or 32kbps 2 G 728 16kbps 3 AAC LD 64kbps or 56kbps 4 G 722 56kbps 64kbps or 48kbps 5 G 711 64kbps 56kbps or 48kbps 6 AAC LD 48kbps or 128kbps Automatically preferred audio algorithms on call rates above 192kbps AAC LD 128kbps AAC LD 64kbps or 56kbps G 722 64kbps 56kbps or 48kbps G 722 1 32kbps or 24kbps G 728 16kbps G 711 64kbps 56kbps 48kbps AAC LD 48kbps or 128kbps NOoOROD G 722 at 64kbps is used in H 323 IP calls only G 711 at 64kbps is used in SIP and H 323 IP calls only 7 Dependent on a call rate above the AAC LD 128 threshold Note that this is not available on all TANDBERG systems 97 TANDBERG COMPASS MXP UTILITY MXP 4 4 3 Natural Video Choosing Natural Video will enable 60 fields per second true interlaced picture for high motion video The use of Natural Video requires the H 263 and H 263 video protocols Natural video will be disabled in H 323 MultiSite calls and in H 320 Continuous Presence MultiSite calls Auto Natural Video Auto will enable transmission of Natural Video from 768 kbps and above Reception of Natural Video is in this case always enabled Off Natural Video Off will disable both transmission and reception of Natural Video Custom 384 kbps and above to 1920 kbps and above 50 fields per secon
67. e Press the Layout button to move it around in the corners of the screen and finally hide it Pressing and holding Layout for 1 second will hide the small picture directly from any position Picture Press the Layout button to see the images side by side e g 1 1 layout outside where the far end and near end are displayed as images of equal size see Picture figure below POP Press the Layout button once more to change to 1 2 layout The far end image will be displayed as the main video with the near end usually the user of the system as a smaller image in the upper right corner If Duo Stream is used the Dual Stream image is displayed as the main image and the far end and near end as smaller images to the right see figure below for an example Press the Layout button again to get the 1 3 layout The next time the Layout button is pressed the normal full screen view of the far end is displayed Pressing and holding Layout for 1 second will always bring you back to full screen 66 4 Administrator Settings Remote view Presentation Let Om 2ndQt rdar 4thaw A Figure 4 3 Example of Picture in Picture a i ee essses2use2 LLT inar Ad on Sane 4m OW Ct to o8ssessss Lag Op 2ndQtr 3rd Ow 4th Qtr e i Remote view f dd Fi IT Selfview af i il yi Presentation Ist Qtr 2nd Qtr 3rd Qtr 4th Qtr Figure 4 6 Example of 1 3 Picture
68. e The default password is public 134 4 Administrator Settings 4 8 2 6 IP Services NTP IP This is the NTP time server address from which the system can get updated time information This is a requirement for proper operation if H 235 authentication is implemented The Network Time Protocol NTP is used to synchronize the time of the system to a reference time server The NTP IP setting holds the IP address to a time source where the system can get the exact time The time server will subsequently be queried every 24th hour for time updates The system will use the time to timestamp messages transmitted to Gatekeepers or Border Controllers requiring H 235 authentication 135 TANDBERG COMPASS MXP UTILITY MXP 4 8 2 7 Quality of Service QoS Type Off No QoS is used Diffserv Diffserv QoS method is used Please see below for details IP IP Precedence QoS method is used Please see below for details Precedence IP Precedence Video Used to define which priority audio video data and signaling should have in the network The higher the number the higher the priority The priority ranges from O off 7 for each type of packets Auto will provide the following priority Audio Video Data Signaling OO GO PE IP Type of Service TOS helps a router select a routing path when multiple paths are available Delay Tells the router to minimize the delay Throughput Tells the router to maximize the throughput Reliabi
69. e according to IEC EN 60950 Encryption Select Encryption if you want to use WEP encryption on your Wireless LAN connection Increased encryption level will decrease performance 132 4 Administrator Settings Use Select which of the keys shown below you want to use Key Key 1 The 64 bit keys can consist of a leading star and 5 characters 4 The 128 bit key can consist of a leading star and 13 characters Start with a and then the text Example 128 bit key secretkeyhome Encryption using Hex numbers The 64 bit keys can consist of 10 hexadecimal digits Example de01ad4dbe The 128 bit key can consist of 26 hex numbers 133 TANDBERG COMPASS MXP UTILITY MXP 4 8 2 5 SNMP Settings SNMP Settings SNMP Trap Host identifies the IP address of the SNMP manager SNMP Simple Network Management Protocol SNMP Ver 1 is used for monitoring and configuring of different entities in a network The system s SNMP Agent responds to requests from SNMP Managers a PC program etc SNMP traps are generated by the agent to inform the manager about important events Traps can be sent to multiple SNMP Trap Hosts Enter the IP address of up to three SNMP managers All traps will then be sent to the hosts listed SNMP Community names are used to authenticate SNMP requests SNMP requests must have a password in order to receive a response from the SNMP agent in the codec Note that the SNMP Community name is case sensitiv
70. e check your network connection or disable the line 101 There is something wrong with ISDN BRI line x Please check your network connection 102 IP E quality warnings The system is experiencing packet loss in the IP network This may affect the quality of the call The system is experiencing high jitter in the IP network This may affect the quality of the call The system is dropping IP packets due to latency in the network This may affect the quality of the call ISDN PRI warnings ISDN PRI is configured for this system but the line is not connected Please check your network connection or disable the network 131 There is something wrong with the ISDN PRI line Blue alarm Please check your network connection 132 There is something wrong with the ISDN PRI line Yellow alarm Please check your network connection 133 There is something wrong with the ISDN PRI line D Channel not active Please check your network connection 134 External Network warnings External Network is configured for this system but the line is not connected Please check your network connection or disable the network 161 Leased E1 T1 warnings Leased E1 T1 is configured for this system but the line is not connected Please check your network connection or disable the network 191 50 3 General Use There is something wrong with the Leased E1 T1 line Blue alarm Please check your network connection 192 There
71. e from My Contacts It is recommended to add new contacts remotely using the IP address and the web interface or telnet To perform the following using the remote control the Kiosk Mode must first be deactivated This is done via the telnet or web interface or by pressing 5 times on the Phone Book symbol then once on the number 3 on the remote control The remote control can be directed to the inside lower edge of the Compass MXP cabinet i e the unit must be temporarily removed from the wallplate On the Utility MXP the remote control can be held directly in front of the small hole just under the speaker grill How to edit a contact in the Local Phone Book 1 Select the contact that is to be edited Press the left arrow on the remote control followed by the down arrow until the Edit Contact icon is selected 3 The current settings for this contact are displayed in a dialogue box Alter the wanted settings 4 Press OK to save Edit Contact Nme len Holm Number 45678 Call Type Video Call Net H323 gt Bandwidth kbps Auto e Restrict 56k On O Off D X Cancel Figure 3 12 Edit Contact 34 3 General Use 3 12 3 Delete Contact The Delete Contact function is available from My Contacts It is recommended to add new contacts remotely using the IP address and the web interface or telnet To perform the following using the remote control the Kiosk Mode must first be deactivated This is done via the teln
72. e web interface of the codec will then be displayed Select the System Configuration tab on top of the page and then the sub tab Upgrade 165 TANDBERG COMPASS MXP UTILITY MXP The following page will now be displayed yj TANDBERG Management Microsoft Internet Explorer provided by TANDBERG ioj xj File Edit view Favorites Tools Help Gx D D x E AD po search Se Favorites L GZ ga m rel a 33 Address a http 10 0 4 6 gt EJ oo 5 Overview M Phonebook System status e System configuration Endpoint configuration ID ISDHH 320 network BRI H 323 SIP wireless lan SNMP ODataport Hetwork profiles Misc Upgrade Far end upgrade Software Upgrade System Information Software Version F3 0 PAL Hardware Serial Number 33430313 Installed Options MultiSite Presenter Security Current Feature Option Key 5201779911343373 Current Bandwidth Option Key 4973379185648639 Software Option New Option Key l F Enable Option Enter the option key in the Key field and BILL De LEE press Enable Option The system will validate the key and if Bandwidth Option Key id valid a restart would be requested for the new option to take effect Enable Bw Option Install Software Release Key Software Upgrade Enter the release key in the Key field and press Install Software You will be presented with a new page where you select the software package file to Install Software piles 7 SC
73. e whole scene Avoid moving backgrounds such as curtains blowing in a draught moving objects or people walking behind as this may both reduce image quality and distract the attention of the calling party Do not place the camera facing a doorway Loudspeaker volume The audio system will use the Digital Natural Audio Module DNAM if available and supported by the system The volume of the audio system is controlled by the Volume Control keys on the system remote control 151 TANDBERG COMPASS MXP UTILITY MXP Appendix 4 Guidelines for setting up videoconferencing rooms The following are a set of guidelines to consider when either building a videoconferencing room or using an existing room for videoconferencing Lighting Low Contrast desired for light intensity No dark spots Intensity table 800 1400 Lux as measured with an Incident light meter Block sunlight from entering room Seating Area Table Should allow all participants to see Monitors Should allow camera to see all participants Non shiny non patterned preferably light grey surface if table used Color Generally high contrast color desired Light blue is commonly used Acoustically reflective surfaces such as glass or concrete should be covered with curtains or sound treatment Audio Noise Floor preferred less than 44dBC Reverb Time 0 3 to 0 5 sec Ventilation Keep in mind Noise Floor Velocit
74. enupassword set lt pin code gt The pin code should be maximum 5 five digits To erase the password enter an empty pin code Streaming password By setting a streaming password in the streaming menu on the system a password has to be entered on the streaming client to be able to see the video stream from the system 154 6 Appendices IP Password By setting an IP Access Password on the system all access to the system using IP Telnet FTP and WEB requires a password This password can be enabled from telnet or dataport using the command ippassword lt ip password gt The default IP username and password is TANDBERG To remove this password use the command ippassword From telnet this is only possible by first entering the correct password IP Services The different IP services on the system FTP Telnet Telnet Challenge HTTP HTTPS SNMP and H 323 can be disabled to prevent access to the system By using the commands below the services can be independently enabled disabled xconfiguration Telnet TelnetChallenge FTP HTTP HT TPS H323 Mode lt On Off gt xconfiguration TelnetChallenge Mode lt On Off gt port xconfiguration SNMP Mode lt On Off ReadOnly TrapsOnly gt SNMP Security alert This function will notify any Management Application such as TMS TANDBERG Management Suite if anyone tries to perform Remote Management on the system using an illegal password The Security alert that is sent to the Man
75. er an incoming call with Auto Answer ON e f Auto Answer is activated then it is not necessary to lift the handset the call will automatically be answered and connected to the built in microphone and speaker see Auto Answer for details e f wishing privacy within an Auto Answered call the user can pick up the handset which will automatically switch the system over to the handset microphone and speaker How to answer an incoming call with Auto Answer OFF e To accept incoming calls on either the Compass MXP or the Utility MXP simply lift the handset e Onthe Compass MXP itis also possible to answer by pressing the middle of the five buttons How to reject an incoming call e To reject an incoming call on the Compass MXP select the Reject icon using the left right arrow buttons then press the central button to confirm e Itis not possible to reject a call on the Utility MXP Call Status Incoming Call 55555 X Reject Figure 3 8 Answering a call When idle the system will accept all incoming calls as long as Incoming Telephone Calls are set to On see Permissions for details 27 TANDBERG COMPASS MXP UTILITY MXP 3 9 End Call ZER Figure 3 9 Ending a call How to end an Auto Dial call e f Auto Dial is activated on either the Compass MXP or Utility MXP then replacing the handset onto the cradle will end the call How to end a non Auto Dial call only possible on Compass MXP e Toend a
76. ernational Name Autoanswer Qof Tel BOE Meme Phone Book Settings External Services Permissions Screen Settings Software Options Date and Time Settings GER Figure 2 2 General settings menu 2 Language Press OK in the Language field and select the wanted language from the list Note This General Language governs the language on the Setting and Screen Menus when in normal mode If multiple languages are desired in Kiosk mode then this is defined within the Kiosk settings menu 12 2 Installation 3 System Name International System Name Enter a name in the System Name field using the number keys on the remote control in the same way as with a mobile or cellular phone Hold down the key for one second to switch back and forth from numbers to alpha characters The International System Name field is only visible if the System Name contains supported Asian and non Latin text input 4 Auto Answer Phone Book Settings External Services Settings and Permissions Utility MXP requires Auto Answer to be activated it is also recommended for Compass MXP Otherwise these settings may be left unchanged if no special needs are required See chapter General Settings for more information 5 Screen Settings The settings may be left unchanged if no special needs are required The display layout may be changed at any time using the Layout button on the remote control 6 Software Options To activate options for t
77. et or web interface or by pressing 5 times on the Phone Book symbol then once on the number 3 on the remote control The remote control can be directed to the inside lower edge of the Compass MXP cabinet i e the unit must be temporarily removed from the wallplate On the Utility MXP the remote control can be held directly in front of the small hole just under the speaker grill How to delete a contact 1 Select the contact that is to be deleted Press the left arrow on the remote control followed by the down arrow until the Delete Contact icon is selected The Delete Contact dialogue box is displayed 3 Confirm by pressing the OK button again Delete Contact Do you really want to delete Helen Holm Cc xp Cancel Figure 3 13 Delete Contact 35 TANDBERG COMPASS MXP UTILITY MXP 3 12 4 Copy Contact to My Contacts It is recommended to add new contacts remotely using the IP address and the web interface or telnet To perform the following using the remote control the Kiosk Mode must first be deactivated This is done via the telnet or web interface or by pressing 5 times on the Phone Book symbol then once on the number 3 on the remote control The remote control can be directed to the inside lower edge of the Compass MXP cabinet i e the unit must be temporarily removed from the wallplate On the Utility MXP the remote control can be held directly in front of the small hole just under the speaker grill The Copy Conta
78. ftware should now be displayed as the Software Version 170 6 Appendices Appendix 13 Declaration of Conformity Contact your TANDBERG representative for a Declaration of Conformity 171 TANDBERG COMPASS MXP UTILITY MXP 7 Glossary 199 AV1 External input for the TANDBERG LOEWE monitor 2nd monitor The second monitor of your videoconferencing system The second monitor is normally placed on the right side of the first monitor ACIF 4 times CIF 704x576 pixels ASIF 4 times SIF 704x480 pixels A AACLD Advanced Audio Coding Low Delay Access code Use Access code to password protect outgoing calls Accessories box The cabinet contains the following W A V E camera table microphone remote control and tracker and documentation Accessories drawer See Accessories box AES Strong encryption Advanced Encryption Standard AGC Automatic Gain Control Maintains the audio signal level at a fixed value by attenuating strong signals and amplifying weak signals Very weak signals i e noise alone will not be amplified Alert speaker The internal speaker will warn you of an incoming call even though the monitor may not be switched on Audio call Audio call equals a telephone call You can make a call with the video system with audio only Audio input 4 Intended for connection to an external microphone amplifier or an external fixed mixer Audio input 5 Intended for connection to external playback
79. he system a new option key must be entered in the Software Options menu see paperwork accompanying the system The Presenter option key should be entered under New Option Key Any bandwidth option key should be entered under New Bandwidth Key For more information on these options please contact your TANDBERG representative 7 Date and Time Settings Select your preferred Date and Time Settings 8 Save changes Remember to save any changes made in a menu by selecting the Save button on the menu line and pressing OK Network configuration 1 Open the Network menu Press OK Menu to open the Main Menu if not already displayed Select Control Panel Administrator Settings Network to open the Network menu Network E LAN Settings Network Profiles Data Port Si Figure 2 3 Network settings menu 13 TANDBERG COMPASS MXP UTILITY MXP 2 ISDN configuration Set the Network type to the desired network Specify the settings for the selected network in the relevant menu For details follow the instructions in ISDN BRI Settings 3 LAN configuration Select LAN Settings in the Network menu and specify the necessary LAN settings according to the instructions from your LAN administrator For details follow the instructions in LAN Settings If there is an H 323 Gatekeeper present on your LAN refer to H 323 Settings as well 4 Network Profiles Please refer to Network Profiles for details 5
80. iew Administrator Settings This window displays all the system settings Use the arrow key on the remote control to scroll through the list The administrator settings available will vary within the MXP system range depending on system and what software options installed View Administrator Settings may contain General Settings System Name Language Dual Monitor Auto answer Max Call Length Access Code Incoming MCU calls Incoming Telephone calls Far End Control Fallback to Telephony Screen Settings TV Monitor Format Picture Layout VGA Monitor Format VGA Out Quality PC Picture Format Allow VGA 50Hz Software Options Options Installed Serial Number Current Option Key Menu Settings Menu Timeout in Call Welcome Menu Welcome Picture Logo Balloon Help Display Welcome Text Welcome Text Administrator Password Presentation Settings Duo Video Mode Start up Video Source Presentation Source Snapshot Source Auto Display Snapshot PIP Appearance PIP Placing VNC Settings Address Display Number Call Quality Video Algorithm Audio Algorithm 45 TANDBERG COMPASS MXP UTILITY MXP Video Quality Default Call Settings Audio Settings Inputs Level Settings Outputs Level Settings Echo Control Audio Levelling AGC Alert Tones amp Volume Video Settings Interlaced Main Camera PC Document Camera VCR AUX VNC Split Screen Call Type Network Bandwidth Restrict 56k Auto H320 Bandwidth Auto
81. igital Clarity which provides presentations of exceptionally high quality resolution video Users can display video and presentations in the best layout based on the situation Supported screen layouts are Picture in Picture Picture outside Picture Side by Side User interfaces A web interface to the codec provides System management diagnostics and software uploads Text chat closed captioning Unicast Streaming which allows broadcasting of audio video via an IP network to a single compatible client RealMedia or Apple Quicktime or streaming server The On Screen Menu Easy interface for first time users with symbols and descriptions Builds upon the familiar current interface NEW Enhanced language support with Asian and non Latin character text input in the menu for local language system names NEW Simplified on screen menu Kiosk Mode designed for public environments Interoperability The TANDBERG Compass MXP and Utility MXP are worldwide compatible with other standards based videoconferencing systems optional feature To check which options are installed select Control Panel Diagnostics System Information in the menu TANDBERG First 1 1 Ata Glance Utility MXP L Compass MXP L 4 SE 1 Introduction Camera The camera is an integrated part of the unit and is centrally placed just above the monitor On the
82. is something wrong with the Leased E1 T1 line Yellow alarm Please check your network connection 193 H323 gatekeeper warnings 51 Could not register to the gatekeeper The gatekeeper rejected to register the system Another system is already registered with the same alias or H 323 ID The max capacity on the gatekeeper is reached Registration failed Tried to register to the gatekeeper without a valid alias Registration failed The system is not allowed to register with this gatekeeper Can not find the gatekeeper Check the gatekeeper configurations on the system TANDBERG COMPASS MXP UTILITY MXP 3 16 8 Text Chat While in an ISDN or IP call to another system supporting Text Chat T 140 select Text Chat from the Control Panel Enter text in the displayed window How to use Text Chat 1 Choose Text Chat from the Control Panel to open the Text Chat window Enter text with the number keys like on a mobile phone The text is sent to the far end continuously letter by letter 3 Press OK to end Text Chat and escape from the text chat window Note that Text Chat is supported in point to point calls only 52 3 General Use 3 16 9 Administrator Settings Administrator Settings contains the configuration of the whole system It is recommended to password protect Administrator Settings to prevent occasional users to make changes to the system See Administrator Settings for further details 53 TANDBERG COMPASS M
83. it must be temporarily removed from the wallplate On the Utility MXP the remote control can be held directly in front of the small hole just under the speaker grill Add a new contact to My Contacts by 1 Select the New Contacts button to open the New Contacts dialog box Enter Name by using the letter keys on the remote control Input will automatically be interpreted as letters Toggle between capital letters and small letters by pressing the button on the remote control The maximum name length is 30 characters For numbers press the button for one second 3 Enter Number by using the number keys on the remote control Input will automatically be interpreted as numbers The maximum number length is 60 numbers Use a star as separator in IP addresses For letters press the button for one second 4 Alter the default setting of Call Type if necessary 5 Alter the default setting of Network if necessary 6 Alter the default setting of Bandwidth if necessary For bandwidth 2x64 kbps or 2x56 kbps two numbers are required see Default Call Settings for more details 7 Alter the default setting of Restrict 56k if necessary 8 Press OK to save Add New Contact Figure 3 11 Add New Contact Name E unn RS Call Type Video Call Net H323 gt Bandwidth kbps Auto ie Restrict 56k On O Off v OK x Cancel 33 TANDBERG COMPASS MXP UTILITY MXP 3 12 2 Edit Contact The Edit Contact function is availabl
84. ld of view when entering the room Other than the conference participants there should be no moving items in the sent image 153 TANDBERG COMPASS MXP UTILITY MXP Appendix 5 Security The system has several features both to protect from unauthorized use and system access Access Code When Access Code is enabled the user will be asked to enter an access code before he she is able to make acall The system will verify if the entered access code is valid by checking the code with the allowed codes listed in the access txt file on the ftp server in the system If no access txt file is uploaded to the system registration of the code will be done without validation E g you can enter whatever code you want and have access to the system The access txt file is a plain text file with one line per access code as shown below 1234 1250 To upload this file to the system follow these steps Open a DOS window and go to the folder where the access ixt file is located Type ftp lt IP address of your local system User press Enter or enter IP password Type bin and press Enter Go to the user folder type cd user Upload the access txt file type put access txt Exit from ftp type bye Administrator Password Access to the administrator menu on the system unit can be controlled using password protection You can set the Administrator Password in Menu Settings in Security or from the dataport m
85. lect the preferred language and press OK to save Note that pressing the Phone Book button 5 times followed by the number button 1 on the remote control will reset the menu language to English 58 4 Administrator Settings 4 1 2 System Name System Name identifies the system On the welcome page During an MCU conference call When using the Web interface When the codec is acting as an SNMP Agent Towards a DHCP server H323 ID Other systems can call in using this name instead of IP number IP address System Name is blank by default System name can be alphanumeric and up to 50 characters long Follow the installation procedure to enter a System Name Note that if the system name contains Asian and non Latin character text input the International Name using Latin characters only must be specified as well 59 TANDBERG COMPASS MXP UTILITY MXP 4 1 3 International Name If the System Name contains Asian and non Latin character text input the International Name using Latin characters only must be specified as well This is in order to make other systems understand the system name 60 4 Administrator Settings 4 1 4 Auto Answer The auto answer setting decides whether an incoming call is put through automatically or manually On The system will automatically answer all incoming calls On Mic The system will automatically answer all incoming calls and switch the Off microphone off when the call is connected
86. lftest View Administrator Settings IP Address Conflict Check Warnings 40 3 General Use 3 16 1 System Information Select System Information to view system numbers line status software version hardware serial number and other useful information Press arrow key up and down to scroll in the System Information list System Information contains System Name Software Network Hardware My ISDN Number Version Lines active Serial My IP Number Internal Test Lines not active Number My IP Address Software MAC address Options Ethernet installed Speed Table 1 System Information Note that the serial number is also found on a sticker on the system It is essential for identifying the system when it comes to service contracts or other support activities The serial number format is xx xxxxx 41 TANDBERG COMPASS MXP UTILITY MXP 3 16 2 Channel Status Comprehensive information about the call progress is available through the Channel Status window This window indicates the various stages each B channel goes through whilst establishing a connection Status Comments BRI Idle the channel is idle Calling when calling the network has acknowledged the call Connected when connection is established Sync when the channels are synchronized Active when all available channels are connected Releasing waiting for the network to confirm a release of the call Released when disconnected the network has acknowledged the di
87. lity Tells the router to maximize the reliability Cost Tells the router to minimize the cost IP Precedence Telephony Used to define which priority audio should have in the network for telephone calls The higher the number the higher the priority The priority ranges from O off 7 for each type of packets 136 4 Administrator Settings Auto will provide the following priority Audio 4 Diffserv Video Used to define which priority Audio Video Data and Signaling packets should have in an IP network The priority ranges from 0 to 63 for each type of packets Diffserv Telephony Used to define which priority Audio packets should have in an IP network for telephone calls The priority ranges from 0 to 63 for each type of packets 137 TANDBERG COMPASS MXP UTILITY MXP 4 8 2 8 IEEE 802 1x 802 1X The system may be connected to an IEEE 802 1x LAN network Supported 802 1x protocols are EAP MD5 EAP PEAP and EAP TTLS The 802 1x authentication are enabled by setting 802 1x Mode to On On 802 1x authentication enabled Off 802 1x authentication disabled Anonymous Identity The 802 1x Anonymous ID string is to be used as unencrypted identity with EAP types that support different tunneled identity EAP PEAP and EAP TTLS The anonymous ID if set will be used for the initial unencrypted EAP Identity Request Identity The 802 1x Username is the username needed for 802 1x authentication Password The 802 1x Passwor
88. ll try to set up calls using encryption Point to point calls If the far end system supports encryption AES or DES the call will be encrypted If not the call will proceed without encryption MultiSite calls In order to have encrypted MultiSite calls all sites must support encryption The padlock symbol will indicate encryption mode AES or DES If there is a mix of AES and DES encryption only the symbol for DES encryption single padlock will be displayed The closed padlock will only be displayed on each site when all links in the MultiSite conference are encrypted If the far end supports encryption the systems will initiate encryption after the call is connected an open padlock symbol will be displayed When encryption has been established a closed padlock symbol will be displayed The system will only send and receive encrypted data The call will not be established if not all participants support encryption The system will not send or receive encrypted data Technical encryption information like encryption algorithm and encryption check code can be found in the Call Status menu Only available on systems with MultiSite option supported and installed 114 4 Administrator Settings 4 7 2 Encryption Mode Auto The system will try to use the most secure encryption AES dependent on the capabilities of the other sites For sites that do not support AES encryption DES encryption will be tried
89. lls using telephone style numbers e g an E 164 alias according to the numbering plan implemented in the gatekeeper The gatekeeper will then translate the dialed number into an IP address see H 323 Settings for more information about gatekeepers Select ISDN to ensure that the call is set up as an ISDN call Select H 323 to ensure that the call is set up as an H 323 call TANDBERG COMPASS MXP UTILITY MXP Bandwidth Restrict 56k Select SIP to ensure that the call is set up as an SIP call Bandwidth decides the quality of the video picture When set to Auto the system will establish a connection using a proper bandwidth for the call typically 384kbps for ISDN calls and 768kbps for IP calls When set to Max the system will set up the call with maximum bandwidth depending on the selected network Overview Auto 384 kbps on ISDN 768 kbps on LAN Max 384 kbps on ISDN BRI 768kbps IP only 768 kbps 12B IP only 512 kbps 8B IP only 384 kbps 6B 320 kbps 5B 256 kbps 4B 192 kbps 3B 128 kbps 2B Bonding H 221 64kbps 1B H 221 Note that some software versions and networks do not support all channel selections A restricted call uses 56kbps channels rather then the default unrestricted 64kbps channels Some older networks primarily in the USA do not support 64kbps channels and require the use of restricted 56kbps calls By default the system will dial an unrestricted call and downspeed t
90. lt for PAL versions Echo canceller Continuously adjusts itself to the audio characteristics of the room and compensates for any changes it detects in the audio environment Echo control When set to On the far end is prevented to hear their own audio Encryption Use encryption to make a secure call The system will try to make point to point calls using encryption If the far end system supports encryption the call will be encrypted If not the call will proceed without encryption Auto encryption Set encryption to On if you don t want an unencrypted call to be established at all Set encryption to Off if you don t want to use encryption End view Stop viewing the site previously chosen with View Site and return the view to the site that is currently On Air Can be used by all conference participants Ethernet Speed The speed Mbps on the connection from the system to the LAN F Fallback to telephony Enables fallback from video calls to telephony speech calls Far End In a video conference Far End means the remote side of the conference Far End Camera is your conference partner s camera Opposite to Near End FECC Far End Camera Control When activated it is possible to control the far end s camera select video sources activate presets and request still images Floor In a multipoint call use Request Floor to broadcast your picture to all other participants This is handy when you are having presentations for teachers
91. m The menu structure for Main Menu and Administrator Settings is shown below Make a Call Standby End Call Presentation Control Panel Phone Book Near End Call Settings Save New Camera Preset Place Video Call Display Preset Diagnostics Text Chat Audio Demo Administrator Settings Restart Place Telephone Call Picture Control Streaming Far End only in call Display Preset User Guide End Call MultiSite Services Do Not Disturb the MultiSite Services Main Video vary depending on Dual Video your Call Snapshot External Services Delay Auto Standby for 1 H Delay Auto Standby for 3 H Do Not Disturb Standby Now Far End Video if available from TMS Figure 1 3 Main menu 1 Introduction Administrator Settings Presentation e Restore eneral Audio ecu Ado Language System Name Intemational Name Auto Answer Phone Book Settings External Services Permissions Sofware Options Date and Time Setti Input Editor Language Menu Timeout in Call Balloon Help Administrator Password Kiosk Mode Settings Startup Icons Presentation Start H 239 Startup Video Source Presentation Source Snapshot Source Auto Display Snapshot PIP Appearance PIP placing VNC Settings Video Algorithm Audio Algorithm Max Upstream Rate Natural Video Default Call Settings Figure 1 4 Administrator Settings menu ISDN External LeasedE1 T1 LAN Settings Network Profiles Encryption Encrypti
92. m will try to determine if the NAT Address or the real IP address should be used within signalling This is done to make it possible to place calls to endpoints on the LAN as well as endpoints on the WAN NAT Address This must be the external global IP address to the router with NAT support Packets sent to the router will then be routed to the system In the router the following ports must be routed to the system s IP address Port 1720 Port 5555 5560 Port 2326 2365 Please contact your TANDBERG representative for further information RSVP Auto Resource Reservation Protocol enables the systems to request the optimal amount of bandwidth for the duration of an IP videoconference Off Resource Reservation Protocol is switched off 127 TANDBERG COMPASS MXP UTILITY MXP H 323 Ports Static When selecting static H 323 ports for TCP connections the ports 5555 to 5565 will be used for Q 931 and H 245 respectively Dynamic The system will allocate which ports to use when opening a TCP connection The reason for doing this is to avoid using the same ports for subsequent calls as some firewall consider this as a sign of attack 128 4 Administrator Settings 4 8 2 3 SIP Settings Mode On Setting the SIP mode to on will enable the system for incoming and outgoing SIP calls Off Setting the SIP mode to off will disable incoming and outgoing SIP calls from the system Display Name The Display name part of the SIP Add
93. me of the Line Setup entries may be grayed out ISDN switch type Select the type of ISDN network connected to your unit Note that 1TR6 should only be used if you are operating the system behind a PABX Line setup This menu allows you to program the numbers associated with your ISDN line If you want to use this ISDN line you need to set Enabled On and enter the numbers of your ISDN line If some of the ISDN lines are not to be used set Enabled Off Line 1 should always be enabled National ISDN and AT amp T Custom ISDN might require SPID numbers associated with your ISDN numbers If you have received two different SPID Service Profile IDentifier numbers for each ISDN line from your network provider you must program both Example Numbers SPIDS ISDN BRI 1 67838498 016783849800 67838498 016783849810 ISDN BRI 2 23478060 012347806000 23478070 012347807000 ISDN BRI 3 23478420 012347842000 23478430 012347843000 ISDN BRI 4 23478520 012347852000 23478530 012347853000 Table 5 Example of Line setup with numbers and SPIDs Note that some systems has less than 4 BRIs available 118 4 Administrator Settings Advanced ISDN Settings Sub address Using a sub address enables you to connect up to eight ISDN terminals to the same ISDN telephone number and line The terminals are addressed by using different sub addresses To call a terminal with a sub address separate the ISDN telephone number and the sub address with a
94. mote system to upgrade local software Off The system will not allow a remote system to upgrade local software Note that the configuration can also be done via the telnet or the serial port Maximum Call Length minutes This feature will automatically end both incoming and outgoing calls when the call time exceeds the specified Max Call Length Max Call Length can have the following values 0 999 minutes where 0 means off 65 TANDBERG COMPASS MXP UTILITY MXP 4 1 8 Screen Settings Auto Layout On If Auto Layout is On the system will change layouts automatically depending on the number of participants in a call and if you have a dual video stream or not Please refer to Layout for more information Off If Auto Layout is Off there will be no automatic layout changes during a call All desired layout changes must be done manually Note that when you receive low resolution images 176x144 pixels or less the screen will automatically adjust to a smaller view to give optimum quality experience Picture Layout The Advanced Picture Layout is related to the Layout button on the remote control and it can be used at any time to change the screen layout For wide screen systems POP mode is recommended You will get optimized picture layouts for wide screen by pressing the Layout button on the remote Picture in Pressing the Layout button on the remote will result in an extra picture in Picture PIP smaller view Picture in Pictur
95. n provides you with the most important system information System Name Your ISDN Number Your IP Address or IP Number It is possible to customize the text on the welcome screen See Menu Settings for how to edit welcome text John Smith My IP Number 12345 N EE E Figure 3 1 The Welcome Screen in normal mode 16 3 General Use 3 2 The Welcome Screen Kiosk Mode When the system is switched on and Kiosk Mode is ON and Show Menu is ON the welcome screen will be displayed The welcome screen presents the menu and displays your main camera image in the background An additional welcome screen can be shown if Language Menu is ON The normal welcome screen will appear after the language has been selected It is possible to customize the text on the welcome screen See Menu Settings for how to edit welcome text Ae Q Figure 3 2 The Welcome Screen in Kiosk Mode 17 TANDBERG COMPASS MXP UTILITY MXP GOOO wer Figure 3 3 Language selection menu 3 General Use 3 3 Using the Remote Control The Utility MXP is only controlled by the handset and from the far end The system is not designed to be controlled by a remote control accessible to the user The remote control is only for system setup and maintenance by authorized personnel The IR receiver is a small hole just below the speaker grill the remote control must be held directly in front of the small hole The Compass MXP is
96. n the Top Left corner 93 TANDBERG COMPASS MXP UTILITY MXP 4 3 9 VNC Settings VNC Settings is necessary when using a VNC presentation See chapter PC Soft Presenter and VNC for more information on how to use VNC Address The IP address of the PC with the VNC software installed To find the IP address of the PC place the mouse pointer on the VNC program icon in the lower right corner of the Windows taskbar You can also select Command Prompt from the Startup menu Run and type cmd then enter This will open a command window and from here Type ipconfig and press enter Display The display number for VNC is 0 and upwards If you are using WinVNC Number double click on the icon on the taskbar to view WinVNC properties This number should correspond with Display Number in this menu Password Enter the same password as specified in WinVNC properties The password will be shown as asterisk signs the next time you enter the menu 94 4 Administrator Settings 4 4 Call Quality The call quality setting is only available when Kiosk Mode is deactivated Call Quality Video Algorithm d u H 263 SL H 264 Audio Algorithm i T G 728 N G 722 G 722 1 AAC LD Max Upstream Rate kbps 768 Video quality Default Call Settings ZER Figure 4 15 Call quality menu Call Quality contains the settings 95 Video Algorithm Audio Algorithm Natural Video Max Upstream Rate Video Quality Default Call Settings
97. not in use it is in standby mode and the screen is black Wake up the system by picking up the handset An incoming call or pressing any key on the Compass MXP will also wake up the system Quick Key for IP Address If the IP address of the system has been mislaid or forgotten it can be shown temporarily on the screen by pressing the central button on the Compass MXP for at least 5 seconds until the address appears on the screen On the Utility MXP the remote control can be removed from the cabinet and the OK button pressed in the same manner Quick Key to Deactivate Kiosk Mode If it is required to deactivate the Kiosk Mode without using the telnet or web interface the following must be performed using the remote control stored inside the cabinet This is only possible if the setting Allow Use of Remote Control has been saved as ON Please refer to later chapters on where the remote control should be directed to enable IR reception e Press 5 times on the Phone Book symbol then once on the number 3 15 TANDBERG COMPASS MXP UTILITY MXP 3 1 The Welcome Screen Normal Mode When the system is switched on the normal welcome screen will be displayed The welcome screen presents the menu and displays your main camera image in the background main camera is system default The ISDN IP numbers and the system name are displayed in the upper right corner The ISDN Number and IP Number are the dial in numbers of the system The welcome scree
98. numbers to the same physical ISDN telephone line The service can be ordered from the telephone company multipoint call A call with more than two participants including yourself MultiSite The TANDBERG systems internal MCU Built in system which makes it possible to establish meetings with up to 6 video calls and 5 telephone calls The MultiSite option is not available on all systems MultiSite cascading By connecting up to 4 or 6 depending on the system capacity MultiSite systems together to achieve a higher number of participants in a multipoint call N NAT Network Address Translation NAT support in the videoconferencing system enables proper exchange of audio video data when connected to an external videoconferencing system when the IP traffic goes through a NAT router Used in small LANs often home offices when a PC and a videoconferencing system is connected to a router with NAT support NAT Address The external global IP address to the router with NAT support Packets sent to the router will then be routed to the system s IP address Natural Audio ModuleTM Designed to improve audio quality during a videoconference It is mounted in the cabinet above the Codec and consists of an audio system optimized for speech Natural Presenter Package Consists of Duo Video Digital Clarity and PC Presenter Natural VideoTF 60 fields per second true interlaced picture Near End In a video conference Near End means your own side of
99. o 56kbps if necessary To force a restricted call choose Restrict 56k On H 221 or 2x64 2x56 Calling Some older or low end video systems do not have the ability to make bonded ISDN calls In these cases it is necessary to dial both ISDN numbers separately to call those systems These types of calls are often referred to as H 221 calls 2x64 calls 2x56 calls as making 2 x 64 kbps or 2 x 56 kbps calls to the same system 104 4 Administrator Settings Place this type of call by Set Network to ISDN Set Bandwidth to 128 kbps A field for the 2nd number pops up in Call Settings Enter the second number in the Call Settings field For 128 kbps calls that use bonding ignore the second number field and just enter one number to be dialed Using sub address extension address MCU password Sub address is used to address different systems on the same ISDN line and is primarily used in European Countries LAN equivalent extension address or TCS 4 is used to address different systems on a LAN when dialing via a gateway To specify an ISDN sub address or its LAN equivalent extension address TCS 4 add a star after the number and then enter the sub address extension address Example 12345678 10 lt number gt lt Sub address extension address MCU password gt When dialing IP via a gateway the number behind the star on IP might be interpreted as an extension address When calling to external MCU s req
100. o be accurate and reliable however TANDBERG assumes no responsibility or liability for any errors or inaccuracies that may appear in this document nor for any infringements of patents or other rights of third parties resulting from its use No license is granted under any patents or patent rights of TANDBERG This document was written by the Research and Development Department of TANDBERG Norway We are committed to maintain a high level of quality in all our documentation Towards this effort we welcome you to Contact us with comments and suggestions regarding the content and structure of this document COPYRIGHT 2006 TANDBERG Environmental Issues TANDBERG visual communication products significantly reduce the need for travel and thereby help reduce various types of pollution TANDBERG recommends the use of low energy peripherals such as EnergyStar monitors Thank you for buying a TANDBERG product Battery handling The batteries for the Remote Control are Long Life Alkaline batteries which means you will need fewer batteries further benefiting the environment Please follow the guidelines on the packing material for handling and disposal instructions for the batteries Waste handling This TANDBERG product contains no consumables that require disposal You should retain the packaging materials in case future shipment is necessary Please contact your local authorities for information on waste handling and recycling regulations
101. on mode Administrator Password IP Access Password Streaming Password VNC Password Remote Upgrade Password Access Code MCU Status Line Web Snapshot Video Name Alert Tones amp Volume Headset Level Settings Only when a non latin character System Name is used Note that the system features and menu settings may vary depending on network selection and software package TANDBERG COMPASS MXP UTILITY MXP 2 Installation Precautions Never install communication wiring during a lightning storm Never install jacks for communication cables in wet locations unless the jack is specifically designed for wet locations Never touch uninstalled communication wires or terminals unless the telephone line has been disconnected at the network interface Use caution when installing or modifying communication lines Avoid using communication equipment other than a cordless type during an electrical storm There may be a remote risk of electrical shock from lightning Do not use the communication equipment to report a gas leak in the vicinity of the leak Always connect the product to an earthed socket outlet The socket outlet shall be installed near to the equipment and shall be easily accessible 1TR6 network type is not approved for connection directly to the telecommunications network This network type is only to be used behind a PABX This product complies with directives LVD 73 23 EC EMC 89 366 EEC R amp TTE 99 5 EEC 2
102. ould be coded If parts of the systems use restricted coding this should be selected Take chair Request chairmanship of the conference If no one else is chairman the request is granted TCS 4 Used to address different systems on a LAN when dialing in via a gateway Terminal Names Lists the site numbers or name if supported of other sites connected in the conference Terminate meeting The chairman can terminate the conference i e all participants are disconnected TMS TANDBERG Management Suite Touch Tones To dial extension numbers etc during a call use touch tones in order to get tones instead of preset on the number keys Tracker The tracker is a small infrared remote control device made to steer the camera to any desired location within the room TSC 1 TCS 1 is used for H243 password on H320 MCU s V VCR Video Cassette Recorder VGA Video Graphics Array 640 x 480 VGA Out Quality Changes the resolution of the VGA signal available in the VGA Out connector at the rear of the codec View administrator settings Displays all the system settings in a read only format View site View any participant in the conference other than the participant currently On Air Can be used by all conference participants VNC Virtual Network Computing Voice Switched The active site will be displayed in full screen during a MultiSite conference W WAVE II Camera Wide Angle View Camera delivers the widest angle of
103. outside Picture wide screen 67 TANDBERG COMPASS MXP UTILITY MXP Note that the following menu settings do not apply for all TANDBERG MXP systems Please refer to the actual menu page on your system VGA Monitor Format To fully leverage your wide screen display activate the Native 16 9 format by setting the VGA Monitor Format to Wide Note that you should only change this setting if your VGA monitor is a wide screen 16 9 monitor or projector The VGA and DVI output will then be optimized for Wide Screen VGA display Normal Output format is optimized for Normal VGA monitors 4 3 Wide Output format is optimized for Wide VGA monitors 16 9 rob Figure 4 8 Wide screen VGA or TV monitor In Wide native mode VGA Out Quality The supported range of VGA formats will be optimized for the VGA display monitor based on the source image VGA Out Quality enables the user to change the preferred format for the DVI VGA output It is recommended to keep this setting in Auto unless your screen doesn t support some of the XGA or SVGA formats the system is using Note that the VGA Out port support VESA Power Management 68 4 Administrator Settings Auto VGA output format will be optimized dependant of the video source format refresh and of the EDID information available Supported formats are SVGA 800x600 75Hz XGA 1024x768 60Hz 75Hz WXGA 1280x768 60Hz SVGA 800x600 VGA output format is forced to SVGA format 800
104. package file to upload Hote that Far End Software Password Upgrade is only possible when in an ISDH conference Install Software with one far end endpoint lone Siem Figure 6 5 5 Enter the release key for the system to be upgraded in the Release Key field If no release key is given the Far End System will use the previously stored release key if possible This will work when upgrading from a main release to a dot release 6 Make sure the setting Far End System Upgrade is set to On at the remote site This setting can be found in the Administrator Settings General Permissions menu 7 Enter the password set at the far end for remote upgrade default password is TANDBERG 8 Press Install Software The system will now use about 90 of the call capacity to transfer the software file across During this time audio and video will be turned off 9 Once the software has been transferred and verified at the far end you will get a new webpage with information that the upgrade of the far end was successful At the same time a message box will appear at the remote system asking if you want to reboot the system to activate the new software 10 To activate the new software The ISDN connection needs to be closed and the TANDBERG MXP system must be rebooted 169 TANDBERG COMPASS MXP UTILITY MXP In the menu on the system under Control Panel System Information the installed so
105. r OTHER MAJOR STANDARDS SUPPORTED H 231 H 233 H 234 H 235 v2 amp v3 H 239 H 241 H 243 H 281 BONDING ISO 13871 H 320 H 323 H 331 RFC 3261 RFC 2237 RFC 3264 RC 3311 RFC 3550 RFC 2032 RFC 2190 RFC 2429 RFC 3407 H 460 18 H 460 19 CAMERA 1 4 CCD 752 H x 582 V resolution Lens f 4mm F1 1 2 64 horizontal field of view 49 vertical field of view Minimum illumination 5 0 lux video output 50 AGC on Manual focus CLOSED CAPTIONING TEXT CHAT T 140 text chat available from Telnet Web and User Inter face TANDBERG COMPASS MXP UTILITY MXP NATIVE PC RESOLUTIONS XGA 1024 x 768 pixels SVGA 800 x 600 pixels VGA 640 x 480 pixels STILL IMAGE TRANSFER CIF SIF 4CIF H 261 Annex D 4SIF VGA SVGA XGA AUDIO STANDARDS G 711 G 722 G 722 1 G 728 64 bit MPEG4 AAC LD AUDIO FEATURES CD Quality 20KHz Mono Automatic noise reduction Acoustic echo canceller Automatic gain control Packet loss management Active lip synchronization GSM _ Blackberry noise filter PRIVACY FEATURE Headset 2 5 mm mini jack FRAME RATES 30 frames per second 168 kbps and above DUAL STREAM Duo Video amp H 239 Available on H 323 amp H 320 NETWORK FEATURES Auto H 320 H 323 dialing SIP Downspeeding Programmable network profiles Intelligent Call Management Maximum call length timer Automatic SPID and line number configuration National ISDN GR 2941 CORE SoftMux URI Dialing IP version 6
106. re C ISDN Upgrade The TANDBERG MXP systems has the possibility to be upgraded remotely from another TANDBERG MXP system using ISDN Please note that both systems must be on software version F3 0 or newer for this functionality Please also note that both systems must be on software version F3 0 or newer for this functionality 1 Connect to the system that shall be upgraded using ISDN 2 Copy the new software file to a folder on your computer for instance c software 3 Type the IP address of the TANDBERG MXP system that the software upgrade is going to be done from for instance 10 0 8 77 in a standard browser such as Internet Explorer 6 0 The web interface of the codec will then be displayed 4 Select the System Configuration tab on top of the page and then the sub tab Far end upgrade 168 6 Appendices The following page will now be displayed TANDBERG Management PST06 6000F Microsoft Internet Exp lol x Fie Edit View Favorites Tools Help Address gt Go ay CO Back x 2 4 A Faoite Links Si 4775 Overview M Phonebook System status e System configura ID ISDHH 320 network PRI BRI Externalleased H323 SIP SNMP D Far End Software Upgrade Install Far End Software Far End Software Upgrade Enter the release key and Release Key password in the Key field and press Install Software You will be presented with a new page where you select the software
107. reaming Address Defined as the IP address of a streaming client streaming server or a multicast address Streaming Address Port If several codecs are streaming to the same IP address different ports have to be used in order for the client to know which stream to receive Streaming Allow remote Start Streaming can be started from the Videoconferencing system using the remote control by using the Data port or from external user interfaces like the Web browser or Telnet session Streaming Announcements The system will announce to the network that it is streaming This enables a streaming client e g a PC to connect to the system s streaming session Used by Cisco IP TV Streaming Password Prevents unauthorized access to the streaming functionality Streaming Source Select between local video and or far end video to be streamed Local and far end audio is always streamed Streaming TTL Router Hops Used for streaming data to limit how many routers the data should pass before it is rejected Streaming Video Rate Defines the Video streaming rate from the system 178 7 Glossary SVGA Super VGA 800x600 SXGA Super extended Graphics Array 1280x1024 System information Lists system numbers line status software version and other useful information System name Identifies a videoconferencing system T T1 Network type 24 channels Default for NTSC versions T1 Line Coding Indicates how the signals on the line sh
108. ress URI is usually a full name or system name Examples Alice Wonderland System 01 SIP Address The SIP Address is the SIP URI used to address the system SIP Address URI lt text field gt Examples alice example com 1234 1234 example com Server Discovery Auto When Auto is selected the SIP Server address is obtained using Dynamic Host Configuration Protocol DHCP Manual When Manual is selected the manually configured SIP Server address will be used 129 TANDBERG COMPASS MXP UTILITY MXP Server Address The Server Address is the manually configured address for the outbound proxy and registrar It is possible to use a fully qualified domain name or an IP address The default port is 5060 for TCP and UDP but another one can be provided Server Address lt text field gt Examples sipserver example com sipserver example com 5060 10 0 0 2 10 0 0 2 5061 Authentication User Name This is the user name part of the credentials used to authenticate toward the SIP Server User name lt text field gt Password This is the password part of the credentials used to authenticate toward the SIP Server Password lt text field gt Server Type Available servers are Auto Nortel Microsoft and Experimental Current RFC s and Drafts supported RFC 3261 SIP Session Initiation Protocol RFC 2327 SDP Session Description Protocol RFC 32
109. rom GSM mobile phones and Blackberry devices Video Quality Features which ensure high quality video includes Natural Video which provides a 60 fields per second true interlaced picture _H 264 video compression up to 768kbps NEW High quality video and native 16 9 formats Network The system supports videoconferencing via both IP and ISDN networks The bandwidth capabilities are up to 768kbps on IP up to 384 kbps on ISDN SIP support If channels are dropped during a videoconferencing session downspeeding automatically maintains connections without interruption Security Secure Conference provides embedded encryption for Point to Point calls and ensures both privacy and security The system is delivered with integrated Expressway firewall traversal technology When used together with a TANDBERG Border Controller it enables Secure and seamless traversal of ANY firewall No missing features when traversing the firewall works with H 264 MPEG4 audio encryption Outside systems such as home offices to be part of the enterprise dial plan TANDBERG COMPASS MXP UTILITY MXP NEW H 460 ITU Standardized firewall traversal support NEW High security network authentication 802 1x The TANDBERG videoconferencing system can also be used purely as an audio bridge with an ISDN connection Presentations The Natural Presenter Package NPP makes it possible to receive presentations and comprises D
110. s numbers to the left Back Cancel button os The X button in the menu corresponds with the X key on the remote 21 TANDBERG COMPASS MXP UTILITY MXP 3 3 2 Number and Letter keys When accessing an input field where letters are required the system automatically goes to letter mode Writing letters works like on a mobile phone Press the key that corresponds to your desired letter Press the key as many times as needed to get the right letter Change to lower or back to upper case letters with the a A key and space with the 0 _ key To write numbers in a text input field press the button through all the letters Press once more and the number will appear Example How do I write System 123 in the System Name input field in General in Administrator Settings Press the 7 key four times to get an S Press the key once to switch between upper case and lower case letters Press the 9 key three times to get a y Press the 7 key four times to get an s Press the 8 key once to get a t Press the 3 key twice to get an e Press the 6 key once to get an m Press the 0 key once to get space Press the 1 key three times to get a 1 Press the 2 key four times to get a 2 Press the 3 key four times to get a 3 22 3 General Use 3 4 On screen Indicators The system has a number of icons signaling different settings Microphone Off This indicator is shown when the microphone is turned off Press the Mic
111. s seaeeeeeaeeseeeeseeeeesaeeeeeeseneeess 63 4 1 7 POLIMISSIONS ege deeg E A A A EE n A 64 vi vii 4 1 8 Sereen Setting EE 66 4 1 9 Software Options 0 eceeeccceceeeeeeeeeeeeeeeeeeeeeceaeeeeaaeseeeeesaeeeseaeeseaeeseeeeeseaeeeeaeseeeeeeaas 71 4 1 10 Date and Time Settings ec eccceeneceeeeeceeeeeeeae scenes eeaeeeseaeeeeaeeseeeeesaeeseaeseneeeeeas 72 4 1 11 Max Call Length 73 ERT DEEN 74 4 2 1 Input Editor Language 75 4 2 2 Menu Timeout In Call 76 4 2 3 Balloon we EE 77 4 2 4 Administrator Password 78 4 2 5 Kiosk Mode Settings ecccccecceeeeeeceeeceeeeeeeceaeeeeeaeseeeeecaeeeeaaesseaeecseeeesaeeeeaaeeseneeseas 79 GG EE 18 0 0 WEE 82 4 2 7 el 84 4 3 Presentation Settings A 85 4 3 1 PRESCMLALIOM Stat EE 86 GE bya EE 87 4 3 3 Startup Video Gource ennt 88 4 3 4 Presentation Gource s inana a aa A a aE a AE i a ia 89 GE nee 90 4 3 6 Auto Display Snapshot ceccceceeeceeeeeeeeeeeeeeeeeaeeeeeeeecaeeeseaeseeaeeseaeeesaeeeeaeseneeeseas 91 4 3 7 PIP eier 92 4 3 8 ad Lea Le VE 93 4 3 9 VNG ul e EE 94 4 4 Call Quality EE 95 4 4 1 Video MYOMA EE 96 d Audo Dlggptbm earannan eles ele nos N E S 97 4 4 3 Natural Vid O EEN 98 4 4 4 Max Upstream Hate KOS eeccceeescccceeeeeceeeeeseceeeseseaeeesnaaeeeeeaeeeeneeaeeeeneeaeenenes 99 445 Video Quality geess ee EE de 100 4 4 6 Default Gall Settings ncrs sinsin iaia See AEN EEN e 103 AD AUGIO EE 106 4 5 1 Headset Level Settings cccc
112. s selected IP address IP subnet mask and Gateway must be specified 3 Start your Web browser In the address field type the IP address of the system Enter the password and the Web page of the system will be shown The default password is TANDBERG 4 Restart the system Choose Restart from the Control Panel Example P assignment Static IP address 196 9 200 129 P subnet mask 255 255 255 0 Gateway 196 9 200 21 158 6 Appendices Appendix 8 Connecting the system to ISDN using NT1 network adapters Connecting Connect the first ISDN cable from ISDN 1 on the system to the S interface on your first NT1 network adapter Connect the other ISDN cables to the appropriate NT1 network adapters Connect the U interface of your NT1 adapter to the line provided from your network provider For convenience the NT1 adapters could be placed inside the cabinet If needed use the shorter ISDN cable RJ45 connectors delivered with the NT1 between the codec and the NT1 and the longer ISDN cable between the NT1 and the connector RJ45 at the wall socket Configuring The configuration of the system is performed in the same manner as described in ISDN BRI Settings The NT1 should be powered up and you should check that the network is active Please check your NT1 User Manual U interface NT 384 NT 1 tripie Wall S T interface 6000 Figure 6 2 Connecting to ISDN using NT1 159 TANDBERG COMPASS MXP UTILITY M
113. sconnection Table 2 Channel status Cause codes The most common cause codes for ISDN are 1 Unallocated unassigned number 2 No route to specified transit network WAN 16 Normal clearing 17 User busy 18 No user responding 21 Call rejected 28 Invalid number format incomplete number 29 Facility rejected 31 Normal unspecified 34 No circuit channel available 41 Temporary failure 58 Bearer capability not presently available 65 Bearer service not implemented 69 Requested facility not implemented 81 Invalid call reference value 88 Incompatible destination 100 Invalid information element contents 102 Recovery on timer expiry 127 Internetworking unspecified 255 TANDBERG specific undefined cause code Table 3 Cause codes 3 General Use 3 16 3 Call Status Comprehensive information about the call is available through the Call Status window The menu has two columns one for transmitted and one for received audio video data information If Dual Stream is available on your system and in use pressing the UP DOWN keys will show one page per connected site Some of the information fields will vary dependent on if H 320 ISDN calls or H 323 IP calls are made 43 TANDBERG COMPASS MXP UTILITY MXP 3 16 4 System Selftest The system performs a check to determine internal hardware integrity System Selftest is useful when you want to check if your network connection is active 44 3 General Use 3 16 5 V
114. tandby regardless of what the previous user was using You can change Startup Video Source to Main Camera PC Document Camera VCR AUX VNC or Current depending on what video sources you have available for your system Choosing Current will result in the last used video source before the system went to standby 88 4 Administrator Settings 4 3 4 Presentation Source The Presentation Source is connected to the Presentation button on the remote Pressing the Presentation button will put the Presentation Source on display Presentation Source is PC by default You can change the Presentation Source to any video source and none Choosing none results in opening the Presentation menu when pressing the Presentation key Only for systems with the PC video input available 89 TANDBERG COMPASS MXP UTILITY MXP 4 3 5 Snapshot Source When you take a Snapshot you get a snapshot of the Snapshot Source Current is the default Snapshot Source This means that you take a snapshot of the video source that is currently active You can change the Snapshot Source to any video source In this way you can program the snapshot key to apply only for PC for instance Press Snapshot and you will take a PC snapshot regardless of what video source that is currently active 90 4 Administrator Settings 4 3 6 Auto Display Snapshot Select Auto to automatically display a received snapshot Turn Auto Display Snapshot Manual if you wish not to h
115. te to the integrated power supply After the system has performed a self test routine the main menu will be displayed on the monitor of the Utility MXP units are shipped with Kiosk Mode OFF The Compass MXP is shipped with Kiosk Mode ON and the monitor will therefore display the Kiosk Menu 11 TANDBERG COMPASS MXP UTILITY MXP 2 4 System Configuration The Compass MXP and Utility MXP have default settings from the factory enabling initial use However the system must be configured for each installation Configuration settings can be made via the system menu using the remote control or more easily via telnet or web interface using IP The following screen pictures are based on remote control access directly on the system whilst the telnet or web interface gives a different visual layout but with the same configuration possibilities Refer to Appendix 7 Web Interface for more details Navigate through the menu system using the arrow keys and OK Remember to press the Save button on the bottom of each menu to save the changes Press Cancel x to return to the previous Menu See General Use for more information about how to use the menus and the remote control General configuration 1 Open the General Settings menu Press OK Menu to open the Main Menu if not already displayed Select Control Panel Administrator Settings General to open the General Settings menu General Language English gt System Name fiom Sih Int
116. tended for system setup when using ISDN The reception of the remote control signal is limited to a small hole directly under the speaker mesh on the Utility MXP The remote control is used to control all functions of the system The remote control uses 4 AAA batteries The system will tell you when batteries are running low Change the batteries at the back of the remote control The reach of the remote control signal is around 20 meters For users sitting in an open plan office this can cause problems Use the little white switch placed under the batteries to change the reach of the signal from 20 meters to 2 meters This will prevent you from unintentionally controlling another video system when you control your own system 1 Introduction 1 2 Menu Structure The menu structure is divided in three The Kiosk Menu which is available for all users when Kiosk mode is activated the Main Menu which contains all functionality of the system and the Administrator Menu that contains all the settings of the system The menu structure for Kiosk Menu is shown below Welcome screen Make a Call Volume Back Close Place a Call End Call Figure 1 2 Kiosk menu TANDBERG COMPASS MXP UTILITY MXP The Main Menu and Administrator Settings are only accessible when Kiosk Menu is deactivated Select Control Panel and Administrator Settings from the Main Menu Making changes to the Administrator Settings will change the behavior of the syste
117. th this command It is a complex trace and requires an extensive knowledge in H 323 signalling to be understood Ping Ping is used to see if the system is able to reach a specific IP address using a mechanism in IP called ICMP If the system is unable to register to its gatekeeper or if it is unable to dial a specific endpoint one can use ping to see if there is at least an IP route to the gatekeeper or to the endpoint In case you have problems one would first ping the default gateway then the gatekeeper and then the other endpoint Traceroute Traceroute does exactly that it traces the route an IP packet takes to reach its destination and displays all router hops Traceroute is very useful for seeing exactly where there is a routing problem in the IP network and for checking where transport delay is introduced Layer 4 Ports used in H 323 calls The layer 4 ports used by the system in a H 323 call can be defined as follows Dynamic The ports are allocated at random from 2048 to 65535 Static Will use the predefined layer 4 ports listed in the tables below Function Port Type Gatekeeper Discovery RAS 1719 UDP Q 931 Call Setup 1720 TCP H 245 Range 5555 5565 TCP Video Range 2326 2341 UDP Audio Range 2326 2341 UDP Data FECC Range 2326 2341 UDP Table 8 Point to point Duo Video 163 TANDBERG COMPASS MXP UTILITY MXP Function Port Gatekeeper Discovery RAS 1719 Q 931 Call Setup 1720 H 245 Range 5555 5565 Video
118. the conference Near Camera is your own camera Opposite to Far End Network clocking Specifies the number of physical external clock signals Network Interface Indicates if the network is of type E1 or T1 Network profiles It is possible to define up to 6 network profiles each consisting of name and call prefix and 3 of them also include network selection Non Standard Facility The network provider may require service selection in your ISDN configuration Valid NSF codes are from 1 to 31 0 will disable NSF service codes NR Noise Reduction Reduces constant background noise e g noise from air conditioning systems cooling fans etc 176 7 Glossary NSF Non Standard Facility NTSC National Television System Committee Video standard corresponding to 4SIF Primary used in USA Japan and other countries O Option Key Required by the system to activate optional features such as MultiSite and Presenter P PAL Phase Alternation by Line Video standard corresponding to 4CIF Primary used in Europe Middle East and Asia Parallel dial Channels will be dialed and connected in parallel when setting up a bonding call PC PresenterTF An easily accessible PC connection plug When connected the PC image is displayed on the monitor PC SoftPresenterTF Shows PC images via the LAN connection PIP Picture In Picture point to point call A call with two participants including your self POP Picture Outside Picture POP
119. to prevent occasional users from making crucial changes to the system see Administrator Password Administrator Settings contain General Menu Settings Presentation Settings Call Quality Audio Video Security Network Restore Default Settings 56 4 Administrator Settings 4 1 General Settings The general settings are only available when Kiosk Mode is deactivated When installing the system go through the General Settings menu to ensure that you have the right settings for your system see System Configuration General S Language English b System Name ohn Smin International Name Autoanswer Qof On On Mic Off Phone Book Settings External Services Permissions Screen Settings Software Options Date and Time Settings GER Figure 4 2 General settings menu General Settings contain Language System Name International Name Autoanswer Phone Book Settings External Service Settings Permissions Screen Settings Software Options Date and Time Settings This field is only visible if the system name contains Asian and non Latin character text input 57 TANDBERG COMPASS MXP UTILITY MXP 4 1 1 Language The system supports 16 different languages for its on screen menus English German French Norwegian Swedish Italian Spanish Portuguese Russian Finnish Chinese Simplified Chinese Traditional Japanese Korean Thai and Arabic Se
120. ts The system is able to generate JPEG snapshots and provide them to the world outside by request as http get or via ftp See Appendix 6 for descriptions of the possible snapshot files On Snapshots generation is enabled Off Snapshots generation is disabled Note that web snapshots are not generated if the conference is encrypted 111 TANDBERG COMPASS MXP UTILITY MXP 4 6 3 Video Name As a default the video inputs are given the names Main Cam PC Doc Cam VCR AUX or VNC dependent on what video sources are available on your system The video names cannot exceed eight characters The names correspond to the video names in the Presentation Menu Choose Presentation from the main menu and open the Main Video or Presentation Video pop up menu If video names are changed you will see the changed name appear in the Main Video and Presentation Video menus 112 4 Administrator Settings 4 7 Security The security setting is only available when Kiosk Mode is deactivated Security Encryption eof 0On Q Auto Encryption Mode AES DES Q Auto Administrator Password IP Access Password Streaming Password VNC Password Remote Upgrade Password Access Code Q Off On GER Figure 4 19 Security menu Security contains the settings Encryption Encryption Mode Passwords 113 TANDBERG COMPASS MXP UTILITY MXP 4 7 1 Encryption Country specific Auto On Off The system wi
121. tton without changing the volume setting you have for the loudspeaker When changing back to the loudspeaker you will get the volume settings you had before you activated the headset 107 TANDBERG COMPASS MXP UTILITY MXP 4 5 2 Alert Tones and Volume Video Call Alert Tone and Telephone Alert Tone To help distinguish between incoming video calls and ordinary telephone calls it is recommended to use different ringing tones for video calls and telephone calls Alert Volume You may change the volume level for the selected ringing tone Key Tones On There will be a sound indicator when pressing keys on the remote control Off There will be no sound when pressing keys on the remote control 108 4 Administrator Settings 4 6 Video The video setting is only available when Kiosk Mode is deactivated Video MCU Status Line Q Auto Web Snapshot Video Name er en e Figure 4 18 Video settings menu Video contains the settings a MCU Status Line Web Snapshots Video Name 109 TANDBERG COMPASS MXP UTILITY MXP 4 6 1 MCU Status Line On The MCU DuoVideo indicator will be displayed and provide information about the conference Off The MCU DuoVideo indicator will not be displayed Auto The MCU DuoVideo indicator will be displayed for a few seconds and then timed out When grabbing the remote control the indicators will be shown again 110 4 Administrator Settings 4 6 2 Web Snapsho
122. uiring a password TSC 1 this password can be added after the star If no password is specified the user will be asked to enter the password after connecting to the MCU 105 TANDBERG COMPASS MXP UTILITY MXP 4 5 Audio The audio setting is only available when Kiosk Mode is deactivated Audio Alert Tones amp Volume Headset Level Settings er e oe Figure 4 16 Audio settings menu Audio contains the settings Headset Level Settings Alert Tones and Volume 106 4 Administrator Settings 4 5 1 Headset Level Settings Headset mic It is possible to adjust the headset microphone input level according to the sensitivity of the used headset The on screen audio level indicator will make it easier to set the correct input level settings The input level should be adjusted so that the average level reaches within the yellow area preferably in the middle The headset microphone input level are adjustable in steps of 1 5 dB from 0 dB to 22 5 cB Headset out It is possible to adjust the audio output level to the headset loudspeakers Headset Level Settings Headset mic lt ___ _ EEGEN aeSsi 8 gt 13 5dB GR Figure 4 17 Headset level settings menu Note that the system has separate volume settings for loudspeaker and headset output The volume keys on the remote control also adjust the level of the headset output when the headset is activated by pressing the push bu
123. ull Duplex 100 Half 100 Mbps speed Half Duplex 100 Full 100 Mbps speed Full Duplex IP Access Password By setting an IP Access Password on the system all access to the system using IP Telnet FTP and WEB requires a password The default IP Access Password is TANDBERG 122 4 Administrator Settings DNS Settings DNS Server 1 5 DNS Server defines the network addresses for DNS servers Up to 5 addresses may be specified If the network addresses are unknown please contact your administrator or Internet Service Provider DNS Domain Name DNS Domain Name is the default domain name suffix which is added to unqualified names Example DNS Domain Name is example com and the name to lookup is videosystem will result in a videosystem example com DNS lookup 123 TANDBERG COMPASS MXP UTILITY MXP 4 8 2 2 H 323 Settings E 164 alias This is the E 164 address of the system The E 164 address is equivalent to a telephone number sometimes combined with access codes Valid characters are 0 9 and When using a gatekeeper the system will send a message to the gatekeeper containing both the E 164 address and the H 323 ID of the system H 323 ID The H 323 ID of the system may be specified here The System name is used if no H 323 ID is entered H 323 Call Setup Direct An IP address must be used in order to make a H 323 call The system will not use a gatekeeper or CallManager Gatekeeper
124. uto answered call will not end the call but will switch back to the built in speaker and microphone e When inside an existing call lifting the handset switches between the built in loudspeaker and microphone and those contained in the handset This feature is the same for both the Utility MXP and the Compass MXP The switching is a toggling action therefore upon replacing the handset on the cradle the unit will switch back to the built in speaker and microphone The above description of handset functions can also be related to the actual units and their default settings for Auto Answer and Auto Dial Utility MXP Default settings Auto answer is ON and Auto dial is ON Lifting the handset outside a call will wake up the system and start to dial the numbers listed in the phone book Thereafter replacing the handset will end the call An incoming call will automatically connect the call with speaker active Lifting the handset in a call will switch from speaker mode to handset mode If you hang up in a call it will switch to speaker mode again Compass MXP Default settings Auto answer is OFF and Auto dial is ON Lifting the handset outside a call will wake up the system and start to dial the numbers listed in the phone book Thereafter replacing the handset will end the call An incoming call will be connected by lifting the handset Thereafter replacing the handset on the cradle will end the call Note If an incoming call is
125. utton 3 to swap images While the notification button is flashing even faster press the button in order to confirm the choice 140 TANDBERG COMPASS MXP UTILITY MXP 5 Interfaces This chapter describes details on the available connectors on the back of the system Video Audio Network TNA Figure 5 1 Connectors 141 TANDBERG COMPASS MXP UTILITY MXP 5 1 1 Video 1 Video Input 1 VGA DVI I DVI Digital Video Interface Integrated Digital amp Analog input supporting resolutions SVGA 800x600 XGA 1024x768 and SXGA 1280x1024 analog or digital DVI and specifications DVI stands for Digital Video Interface and is a form of video interface technology made to maximize the quality of flat panel LCD monitors and high end video graphics cards The TANDBERG codec contains a DVI I plug that can transmit either digital DVI signals or standard analog VGA signals depending on what type of monitor is connected DVI Specifications TANDBERG DVI I follows the VESA Monitor Timing Standard v1 08 also knows as Display Monitor Timing DMT Analog Horizontal Vertical Pixel Frequency frequency Clock 800x600 46 875kHz 75 00Hz 49 50MHz 75Hz 1024x768 48 363kHz 60 004Hz 65 00MHz 60Hz Digital 800x600 46 875kHz 75 00Hz 49 50MHz 75Hz 1024x768 48 363kHz 60 004Hz 65 00MHz 60Hz Table 6 DVI I Video resolution supported in F1 and above 142 5 Interfaces Supported DVI cables TA
126. word p Kiosk Mode Settings Startup Icons We en oi Figure 4 11 Menu settings menu Menu Settings contain the settings Input Editor Language Menu Timeout In Call Balloon Help Administrator Password Kiosk Mode Settings Startup Icons 74 4 Administrator Settings 4 2 1 Input Editor Language When the Input Editor Language is set to Chinese Korean or Japanese the user will be able to enter Chinese Korean Japanese characters into an input field like the System Name or Phone Book using the remote control 75 TANDBERG COMPASS MXP UTILITY MXP 4 2 2 Menu Timeout In Call Main menu appears on the bottom line of the screen Set Menu Timeout In Call to On if you want the menu to time out automatically when you are in a call On The menu will time out automatically after 15 seconds if there is no activity on the remote control Menu timeout does only apply when you are in a call Outside a call the menu will not time out Off The menu will not time out automatically Press Cancel X to hide the main menu manually 76 4 Administrator Settings 4 2 3 Balloon Help It is possible to enable disable the balloon help window On Choose On if you want help text windows to appear Off There will be no help text window 77 TANDBERG COMPASS MXP UTILITY MXP 4 2 4 Administrator Password It is recommended to put an Administrator Password on the system The Administrator Password can be m
127. x600 75Hz 75Hz XGA 1024x768 VGA output format is forced to XGA format 1024x768 60Hz 60Hz VGA Out Quality for Wide XGA If VGA Monitor Format is set to Wide PC Picture Format is set to Normal VGA Out Quality is set to Auto the layout on the monitor is either fullscreen or POP and the input source to the largest window is PC with resolution 1024x768 the system will use WideXGA 1280x768 instead of XGA when the monitor supports this PC Picture Format wide screen monitors only PC Picture Format setting only takes effect when TV or VGA Monitor Format is set to Wide Use this setting to determine if you want your PC presentations to be shown stretched in full screen or with correct aspect ratio using part of the widescreen display With the VGA Out Quality set to Auto the presentation will be of the best possible quality supported by the monitor Normal VGA output will have 4 3 aspect ratio on wide screen monitor Wide VGA output will utilize the wide screen monitor at full 90 gt gor 707 60 507 40 S 30 Ge S Gr T 107 os BEE EE SEN Ba Ist Qtr 2nd Qtr 3rd Qtr 4th Qtr Figure 4 9 PC presentation shown in Normal correct ratio mode 69 TANDBERG COMPASS MXP UTILITY MXP IstQt 2ndQt 3rdQwr Ab Om Figure 4 10 PC Presentation shown in Wide stretched mode 70 4 Administrator Settings 4 1 9 Software Options In order to activate additional bandwidth you need to enter a
128. xternal system uses RS2366 ports Call status Comprehensive information about the call listing transmitted and received audio video data information Camera tracking Voice Activated Camera Positioning the camera will automatically view the current speaker Camera tracking mode Voice Activated Camera Positioning the camera will automatically view the current speaker Chair control Enables one participant to control the meeting by selecting which of the conference participants that is to be broadcasted to the other participants Channel status Comprehensive information about the call progress listing the numbers called and if an error occurs a cause code is displayed CIF Common Intermediate Format 352x288 pixels Closed Captioning Text chat Codec The Codec is the heart of the system The main task for the Codec is the compression of outgoing video audio and data the transmission of this information to the far end and the decompression of the incoming information Continuous Presence See Split Screen Control Panel The Control Panel is found in the main menu CSU Channel Service Unit D Daisy chaining Use of several cameras in a video conference Dataport The system provides two standard RS 232 data ports to allow a computer to be connected for data transfer and control purposes Dataport 1 A standard RS 232 data port to allow a computer to be connected for data transfer and control purposes Dataport 2 De
129. y Noise Therefore keep velocity of air low Room Should be located away from noise Should not have windows Doors should be located off camera How to prepare a typical room for videoconferencing The illustration below shows the principles of a typical room designed to obtain the best results when using a videoconference system 152 6 Appendices H3 Prestered camera views NSA Document camens Figure 6 1 Video conferencing room If the system has a separate microphone it should be placed at the front of the table to ensure that all speech will be detected The best position for the microphone is at least 2 meters 6 5 feet in front of the system on a plain flat table with at least 0 3 meters 12 inches of table in front of the microphone The document camera should be close to the chair person or a designated controller of the document camera for ease of use remember to arrange all the peripherals so that one participant can reach each of them to point change the display tape and so forth The camera supports up to 15 pre stored camera positions The illustration shows three possible camera positions one for all the participants one for the whiteboard and one for the main speaker The remaining camera presets are then available for other peripheral equipment for example a VCR Position the system in such a way as to avoid the possibility of somebody inadvertently walking into the camera s fie
130. y MXP or Compass MXP will switch over to single stream It is not possible to send a Dual Stream from the Utility MXP or Compass MXP Dual Stream and Bandwidth Using Dual Stream the quality automatically downspeeds to the optimal bandwidth This means that you need higher quality to allocate enough bandwidth for the two video streams Dual Stream borrows bandwidth from main video When Dual Stream is closed the bandwidth is returned to the main video 38 3 General Use 3 15 Control Panel The control panel is only available when Kiosk Mode is deactivated Control Panel Er Diagnostics Gel Text Chat L fellate La dei Restart User Guide Settings Figure 3 14 Control Panel menu The Control Panel contains the features Diagnostics Text Chat Audio Demonstration Administrator Settings Restart User Guide Audio Demonstration is not available on this product 39 TANDBERG COMPASS MXP UTILITY MXP 3 16 Diagnostics The diagnostics panel is only available when Kiosk Mode is deactivated Diagnostics allows testing of individual system components and displays the current system settings Diagnostics System Information Channel Status Call Status Detailed Call Status System Selftest View Administrator Settings IP Address Conflict Check CREWE CG Figure 3 15 Diagnostics menu Diagnostics contain System Information Call Status Channel Status System Se
131. y try to authenticate itself to the Gatekeeper Off If Authentication Mode is set to Off the system will not try to authenticate itself to a Gatekeeper but will still try a normal registration Authentication ID Authentication Password The system sends the Authentication ID and Password to a Gatekeeper for authentication The authentication is a one way authentication from the endpoint system to a Gatekeeper i e the endpoint is authenticated to the Gatekeeper If the Gatekeeper indicates that no authentication is required the endpoint will still try to register 125 TANDBERG COMPASS MXP UTILITY MXP CallManager Settings CallManager IP This is the CallManager IP address that is used if you specify H 323 Call Setup CallManager 126 4 Administrator Settings Advanced H 323 Settings The Advanced H 323 Settings only have an effect if they are supported by your IP infrastructure NAT NAT Network Address Translation is used when a PC and a videoconferencing system are connected to a router with NAT support NAT support in the videoconferencing system enables proper exchange of audio video data when connected to an external videoconferencing system when the IP traffic goes through an NAT router When NAT is On the NAT Server Address will be shown in the startup menu My IP Address 10 0 2 1 On The system will signal the configured NAT Address in place of its own IP address within Q 931 and H 245 Auto The syste

TANDBERG Utility Telephone User Manual

Contents

Download Pdf Manuals

Related Search

Related Contents