Stanton SINGLE TOP LOADING CD PLAYER PROFESSIONAL PREAMP MIXER CD Player User Manual
Contents
1. 4d6 CH1 CH2 CUE PAN P ER 26 9 ma HIGH CUE LEVEL 10 10 OOOOO OOOOO 1 2 FADER START 2 8 Y A SMX 211 MIXER FEATURES TOP amp FRONT PANEL Input fader Controls individual source levels channels in the mix Input toggle switch Selects which source will be active based on what you have connected to the rear panel input section phono line Treble and Bass EQ Adjusts the high and low frequency levels of the input channels for good sound Channel Gain Adjusts the pre fader volume for cleaner sound Replaceable Crossfader Achieves clean segues between the two input channels Hard left selects Channel 1 Hard right selects Channel 2 With the crossfader centered both assigned channels are live Use the crossfader for fast and seamless segues fades from one selected channel to the other REAR PANEL 12 13 14 po on 10 11 Note The crossfader is user replaceable in case of failure Simply unscrew the two large screws which hold it in place lift it out and disconnect itis cable Re attach the new crossfader and screw the mounting plate back onto the unit you re back in business Mic Input Gain2. nc Warranty Provision Returns for Repairs or Replacement WARRANTY Through Stanton s authorized dealers around the World Stanton or one of Stanton s authorized distributors outside the U S will without charge repair or replace at the sole discretion of the entity responsible for making the repair or providing the replacement any Stanton merchandise proved defective in material or workmanship for a period of one 1 year following the date of original purchase Exceptions to this warranty are as noted below The warranty for mechanical parts which are subject to wear and tear are limited to the earlier to occur of thirty 30 days following the date of original purchase or the following number of cycles Faders 15 000 Rotary potentiometers 10 000 and Switches 10 000 Stanton will warrant all replacement parts and repairs for ninety 90 days from the date of original shipment Repairs made necessary by reason of misuse alteration normal wear or accident are not covered under this warranty RETURNS Authorized Stanton dealers are only authorized to sell and distribute merchandise within a specific country All goods requiring warranty repair or replacement must be returned freight prepaid if not hand delivered to the authorized Stanton dealer from whom the merchandise was purchased and in the same country where the merchandise was purchased For purposes of purchases made via the Internet the merchandise must be re
3. Fader Start This function works in conjunction with a compatible fader start CD player When used with a compatible CD player you can use the crossfader to start and stop the CD player with the slide of the fader The fader start switch activates the fader start feature When in the ON position the fader start allows the fader to return automatically to preset digital CUE POINTS on your compatible STANTON DJ CD Player Power Connector Plug in power adapter here and check the voltage level to match your countryis standard Power Switch turns unit off and on Note Remember to turn ALL volume levels down when turning on off the unit QUICK SETUP DIAGRAM Study this setup diagram Make sure all faders are at Zero and all devices are off First connect all input sources and processors Next connect your microphone and monitor headphones Finally connect the stereo outputs to the power amplifier s and or audio receivers such as tape decks Plug your mixer into AC power Now you are ready to switch everything on IMPORTANT Always switch on your audio input sources such as turntables or CD players first then your mixer and finally any amplifiers When turning off always reverse this operation by turning off amplifiers then your mixer and then input devices TURNTABLE b Y stantwn ED IS e TURNTABLE EEE5 6
4. Power Sources This product should be operated only from the type of power source indicated on the rating label If you are not sure of the type of power supply to your home consult your product dealer or local power company For products intended to operate from battery power or other sources refer the operating instructions Grounding or Polarization This product may be equipped with a polarized alternation current line plug a plug having one blade wider than the other This plug will fit into the power outlet only one way This is a safety feature If you are unable to insert the plug fully into the outlet try reversing the plug If the plug should still fail to fit contact your electrician to replace your obsolete outlet Do not defeat the safety purpose of the polarized plug Power Cord Protection Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them paying particular attention to the cord in correspondence of plugs convenience receptacles and the point where they exit from the appliance Cleaning The appliance should be cleaned only as recommended by the manufacturer Clean by wiping with a cloth slightly damp with water Avoid getting water inside the appliance For AC line powered units Before returning repaired unit to user use an ohm meter to measure from both AC plug blades to all exposed metallic parts The resistance should be more
5. POWER AMPLIFIER CD PLAYER TAPE DECK CONNECT THE POWER SETUP DIAGRAM LINE 2 OUTPUT EE stanton SMX 211 1 HIS MIC 57 GAIN k o 26 tait HIGH HIGH o 2 II OOOOO S I OOOOO BBEHBBz BH J 1 za ae E 8NEE3S BB o S 250 SMX 211 1 AC IN 4 LINE 1 2 FADER START 5 LINE 2 3 AUDIO OUT 6 OUTPUT 7 FADER START A 8 FADER START B 9 AC 9V AC ADAPTOR SPECIFICATION S 250 POWER SOURCE Dual Voltage AC 115 230V 50 60Hz Single Voltage AC 100V 50Hz For Japan AC 110V 60Hz For Taiwan AC 120V 60Hz For U S A Canada AC 127V 60Hz For Mexico AC 220V 50Hz For United Arab Emirates Chile Aegentina AC 220V 60Hz For Philippines AC 230V 50Hz For Europe U K New Zealand South Africa Singapore srael AC 240V 50Hz For Australia DIMENSIONS 216 W x 275 H x 88 D mm WEIGHT 2 3Kgs S 250 10 AC IN 11 FADER START 12 AUDIO OUT SMX 211 POWER SOURCE AC 9V DIMENSIONS 228 W X 265 D X 87 H mm WEIGHT 2 8Kg Stanton Magnetics
6. Adjust s microphone input level Mic Input Insert your Micr ophone with 1 4 plug in here Headphone Input Insert in the 1 4 plug for your headphones here Channel Cue Cue Pan Used to preview channel audio to your headphones Listen here before bringing up channel faders or moving the crossfader Headphone Level fi Adjusts cue volume Master Fader Controls the overall output level POWER MASTER L2 EIC stanton 9 ON START 2 STAR Grounding post for turntable connection Always use this connection when using standard turntables with ground cable Some turntables like the STR8 80 100 do not require grounding wire Phono Inputs Plug your turnt ables in here When these connectors are used your signal is fed directly to the high quality RIAA phono pre amplifiers Use this position only for turntables Line level sources will overload the sensitive phono pre amps and will cause distortion Line Inputs Unbalanced RCA jacks for connecting stereo audio from line level sources such as CD players HiFi VCRs cassette and reel to reel tape decks DAT machines laser discs tuners even synthesizers or other mixing consoles NOTE Plug mono audio sources into both Left and Right inputs using a Y cable connector IE 15 16 17 18 7 Stereo Main Outputs Unbalanced RCA connectors controlled by the Master fader
7. DIGIPAK SINGLE TOP LOADING CD PLAYER PROFESSIONAL PREAMP MIXER OWNER S MANUAL stanten STANTON MAGNETICS INC information stantondj com 954 689 8833 www 5s t an tr on d j co m IMPORTANT SAFETY INSTRUCTIONS 1 10 11 12 13 14 Read Instructions All the safety and operating instructions should be read before this product is operated Retain Instructions The safety and operating instructions should be retained for future reference Heed Warnings All warnings on the appliance and in the operating instructions should be adhered to Follow Instructions All operating and use instructions should be followed Water and Moisture The appliance should not be used near water for example near a bathtub washbowl kitchen sink laundry tub in a wet basement or near a swimming pool and the like Carts and Stands The appliance should be used only with a cart or stand that is recommended by the manufacturer An appliance and cart combination should be moved with care Quick stops excessive IM 6 force and uneven surfaces may cause the appliance and cart combination to overturn PATES lt Wall or Ceiling Mounting The product should be mounted to a wall or ceiling only as recommended by the manufacturer Heat The appliance should be situated away from heat sources such as radiators heat registers stoves or other appliances including amplifiers that produce heat
8. For sets with ventilation holes Do not let foreign objects in the set Do not let insecticides benzene and thinner come in contact with the set Never disassemble or modify the set in any way 3 250 FUNCTIONS a N 2 5 6 S 250 FUNCTIONS 1 EJECT Opens the CD door 2 STOP Stops the CD 3 SKIP Skips through the tracks on the CD forward or back 4 4 Scans forward or back through the current track This unit features 3 scan speeds Keep the or button pressed for a few seconds to change the scan speed 5 PLAY PAUSE Plays or pauses the CD Autocue function sets the cue point automatically when this button is used 6 CUE Used to recall and preview the cue point 7 TIME LCD display reads the time remaining or time elapsed according to this button 8 PITCH Turns pitch fader ON and OFF 9 PITCH SELECT Pressing the PITCH and PITCH BEND minus buttons simultaneously changes the pitch fader range between 8 12 and 16 10 PITCH BEND Maximum pitch on this unit is 16 If the pitch fader is already physically set to 16 this function will not work 11 SGL CTN Switches between Single or Continuous play modes 12 LOOP Press once to set starting loop po
9. IC SHOCK any cover No user serviceable parts inside Refer servicing to DO NOT OPEN qualified service personnel only The lightning flash with arrowhead symbol within the equilateral triangle is intended to alert the use to the presence of un insulated dangerous voltage within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock The exclamation point within the equilateral triangle is intended to alert the user to the presence of important operation and maintenance servicing instructions in the literature accompanying this appliance CAUTION To prevent electric shock do not use this polarized plug with an extension cord receptacle or other outlet unless the blades can be fully inserted to prevent blade exposure LINE VOLTAGE SELECTION Just for Dual Voltage model only The desired voltage may be set with the VOLTAGE SELECTOR switch on the rear panel of the main unit using a screwdriver Do not twist the VOLTAGE SELECTOR switch with excessive force as this may cause damage lf the VOLTAGE SELECTOR switch does not move smoothly contact a qualified serviceman NOTE ON USE Allow for sufficient heat dispersion when installed on a rack Handle the power cord carefully Hold the plug when unplugging the cord Keep the set free from moisture water and dust Unplug the power cord when not using the set for long periods of time Do not obstruct the ventilation holes
10. arranty provides you with specific legal rights You may also have additional rights which are subject to variation from state to state and country to country If there is a dispute regarding the warranty of merchandise that does not fall under the warranty conditions stated above please include a written explanation with the merchandise when returned pursuant to the terms and conditions set forth herein Please register your product online at www stantondj com or mail your completed warranty card to Stanton Magnetics Inc 3000 SW 42 St Hollywood Florida 33312 d Z 514 Ang noA pip 919UNA oseuoJng jo 9 eq Joquunw IEL S Jequunw J PON O3NI LONGOUd uoud l L 1yuno2 9189 S A9 ssa1ppy O3NI IVNOSA d AUEJHEM sleplleA O ui J919IdUulo2 puedo SIU SIMI YJO U102 DUO1UE1S AAAMA je jonpoud 1 1sIB91 esee d sso22E6 19U193UI eAeu NOA J Gavo NOI1VMISIO3H ALNVAUVM NOLNVLS cut along dotted line Stanton Magnetics Inc 3000 SW 42nd Street Hollywood FL 33312 U S A
11. been adhered to Attachments do not use attachments not recommended by the product manufacturer as they may cause hazards Accessories Do not place this product on an unstable cart stand tripod bracket or table The product may fall Causing serious injury to a child or adult and serious damage to the product Use only with a cart stand tripod bracket or table recommended the manufacturer or sold with the product Any mounting of the product should follow the manufacturer s instructions and should use a mounting accessory recommended by the manufacturer Lightning For added protection for this product during a lightning storm or when it is left unattended and unused for long periods of time unplug it from the wall outlet and disconnect the antenna or cable system This will prevent damage to the product due to lightning and power line surges Replacement Parts When replacement parts are required be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part Unauthorized substitutions may result in fire electric shock or other hazards Safety Check Upon completion of any service or repairs to this product ask the service technician to perform safety checks to determine that the product is in proper operating condition IMPORTANT SAFETY INSTRUCTIONS CAUTION To reduce the risk of electric shock do not remove RISK OF ELECTR
12. int press again set ending point and enter loop Press a third time to exit loop 13 LCD DISPLAY Shows time minutes seconds frame and pitch information 14 PITCH FADER Used to speed up or slow down current track 15 AUDIO OUT This stereo line output connects to the line input on any DJ mixer 16 DIGITAL OUTPUT This coaxial S P DIF digital output connects to any RCA S P DIF input as found on most standard computer sound cards or CD burners 17 FADER START Connects to any DJ mixer equipped with a fader start input This enables the user to start the CD from the cue point using the mixer s cross or line fader depending on the mixer 18 VOLTAGE SELECTOR Used to select the unit s voltage according to the local setting Note The voltage should preset correctly from the factory however make sure to check it before powering the unit Just for Dual Voltage only 19 AC IN This is the connection for the supplied power cable 20 POWER This button is used to power the unit ON and OFF 21 PHONES Use this stereo jack to connect a pair of headphones SMX 211 FEATURES Compact design User replaceable crossfader 2 phono 2 line 1 microphone input Gain Treble and Bass Controls on Channels Powerful stereo headphone output Cue Pan Selector Ch 1 Ch 2 Bright LED Output Indicators Selectable Fader Start Ch 1 CH 2 SMX 211 MIXER FEATURES Stanton 1 max max max max MIC GAIN GAIN MASTER
13. than 100 000 ohms Non use Periods The power cord of the appliance should be unplugged from the outlet when left unused for a long period of time 15 16 gt OO W 17 18 19 20 21 22 23 Object and Liquid Entry Care should be taken so that objects do not fall and liquids are not spilled into the enclosure through openings Damage Requiring Service The appliance should be serviced by qualified service personnel when The power supply cord or the plug has been damaged or Objects have fallen or liquid has been spilled into the appliance or The appliance has been exposed to rain or The appliance does not appear to operate normally or exhibits a marked change in performance or The appliance has been dropped or the enclosure damaged Servicing The user should not attempt any service to the appliance beyond that described in the operating instructions All other servicing should be referred to qualified service personnel Ventilation Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from overheating and these openings must not be blocked or covered The openings should never be blocked by placing the product on a bed sofa rug or other similar surface This product should not be placed in a built in installation such as a bookcase or rack unless proper ventilation is the manufacturer s instructions have
14. turned to the authorized Stanton dealer in the country where the authorized Stanton dealer which sold the merchandise to purchaser is located and not the authorized Stanton dealer in the country where the purchaser is located or the country in which the merchandise was received Any returns to a non authorized dealer or to an authorized Stanton dealer not in the same country as the merchandise was intended to be sold or as set forth above will void this warranty To initiate a warranty repair you must contact the authorized Stanton dealer from whom you purchased the merchandise and follow such authorized Stanton dealer s return policy Stanton assumes no risk and shall be subject to no liability for damages or loss resulting from the specific use or application made of the merchandise Stanton s liability for any claim whether based on breach of contract negligence infringement of any rights of any party or product liability and relating to the merchandise shall not exceed the price received by Stanton from your purchase of such merchandise In no event will Stanton be liable for any special incidental or consequential damages including loss of use loss of profit and claims of third parties however caused whether by the negligence of Stanton or otherwise To the extent permitted by law and except as otherwise provided above Stanton disclaims any express or implied warranties of merchantability or fitness for a particular purpose The above w
Download Pdf Manuals
Related Search