Stanton C.502 CD Player User Manual
Contents
1. 1 AUTO CUE 2 TRACK INDICATOR 3 FOLDER TRACK INDICATOR 4 PLAY PAUSE INDICATOR 5 CUE INDICATOR 6 SINGLE INDICATOR 7 MP3 INDICATOR TIME BAR INDICATOR LOOP INDICATOR RELOOP INDICATOR PITCH INDICATOR PITCH METER TIME DISPLAY CHARACTER DISPLAY TOTAL REMAIN INDICATOR REMAIN INDICATOR 17 ELAPSED INDICATOR 0 1 2 3 4 5 6 7 PREPARATIONS 1 Checking the Contents Check that the carton contains the following items 1 Main unit 2 Control unit 3 Operating instructions this booklet 4 Two pair of RCA pin cord 5 Control cords 1 meter 6 Power cord 7 Two fader start cables Installing the Unit Mount the unit onto your console or rack with 19 EIA rack rails CAUTION The player will work normally when the main unit is mounted with the front panel at within 15 degrees of the vertical plane If the unit is tilted excessively discs may not be loaded or unloaded properly Max 15 Main unit Figure1 Connections 1 Turn off the POWER switch 2 Connect the RCA pin cord to the input on your mixer The control panel s LCDs are designed to be clearly visible within the angles shown in Figure 2 Mount the control unit so that the visual angle is within this range Control Panel Button Figure2 3 Connect the control cords to the REMOTE connector on the main unit CAUTION NAMES AND FUNCTIONS2. OPERATIONS eee Scanning Fast forward Fast backward Scanning is a function for moving quickly forward or backward when lt or BP button is pressed The scanning speed depends on how long you hold the button Press and hold the lt q or PP to begin scanning The disc moves rapidly forward or backward and the sound is output The current scan point is indicated on the LCD Press and hold to scan in the forward scanning scan in the reverse scanning 10 Time display MP3 MODE Press the TIME button to select time display MP3 mode Elapsed time of a track Remaining time of a track 2107 0 02 3 03 lt 10 1 CD MODE Press this button to switch the time display It switches between the elapsed time and remaining time and total remaining time of the disc TIME 82 3 02 PE 023503 lt L Figure 10 2 11 Matching the Beats Per Minute BPM There are two tools available for matching the BPM of the two CDs Use the pitch slider to adjust the BPM statically 2 Use the PITCH BEND buttons to change the BPM temporarily Use the JOG WHEEL to
3. use alteration normal wear or accident are not covered under this warranty Returns Authorized Stanton dealers are only authorized to sell and distribute merchandise within a specific country All goods requiring warranty repair or replace ment must be returned freight prepaid if not hand delivered to the authorized Stanton dealer from whom the merchandise was purchased and in the same country where the merchandise was purchased For purposes of purchases made via the Internet the merchandise must be returned to the author ized Stanton dealer in the country where the authorized Stanton dealer which sold the merchandise to purchaser is located and not the authorized Stanton dealer in the country where the purchaser is located or the country in which the merchandise was received Any returns to a non authorized dealer or to an authorized Stanton dealer not in the same country as the merchandise was intended to be sold or as set forth above will void this warranty To initiate a warranty repair you must contact the authorized Stanton dealer from whom you purchased the merchandise and follow such authorized Stanton dealers return policy Stanton assumes no risk and shall be subject to no liability for damage or loss resulting from the specific use or application made of the merchandise Stantons liability for any claim whether based on breach of contract negligence infringement of any rights of any party or product liability and relating to th
4. 482 W x 88 8 H x 60 D mm 19 W x 3 1 2 x 2 1 3 D Weight Player unit 5 3 kgs 11 7 Ibs Control unit 1 8 3 9 Ibs Power supply Dual Voltage AC 115 230V 50 60Hz Single Voltage AC 100V 50 60Hz For Japan AC 110V 60Hz For Taiwan AC 120V 60Hz For U S A Canada Mexico 220 50Hz For United Arab Emirates Chile Aegentina 230 50Hz For Europe New Zealand South Africa Singapore Israel 220V 60Hz For Philippines AC 240V 50Hz For Australia U K Power consumption 25W WARRANTY amp RETURN POLICY Warranty Through Stantons authorized dealers around the World Stanton or one of Stantons authorized distributors outside the U S will without charge repair or replace at the sole discretion of the entity responsible for making the repair or providing the replacement any Stanton merchandise proved defective in material or workmanship for a period of one 1 year following the date of original purchase Exceptions to this warranty are as noted below The warranty for mechanical parts which are subject to wear and tear are limited to the earlier of either thirty 30 days following the date of original purchase or the following number of cycles Faders 15 000 Rotary potentiometers 10 000 and Switches 10 000 Stanton will warrant all replacement parts and repairs for ninety 90 days from the date of original shipment Repairs made necessary by reason of
5. e Be sure to use the supplied control cords Using another type of cable may result in damage Be sure the power is off when connecting the control cords Otherwise the units may not work properly Main Unit Front Panel 1 POWER Power ON OFF Switch When the POWER switch is pressed the power turns on 2 DISC HOLDER Place the discs in the holder Press the OPEN CLOSE button to open and close the disc holder 3 OPEN CLOSE Press it to open and close the disc holder The control unit also includes OPEN CLOSE button The disc holder cannot be opened during playback so stop playback before pressing the button 4 REMOTE CONTROL CONNECTOR Connect this connector to the control unit using the included control cord 5 AUDIO OUT The audio signals from each player are output from these jacks 6 DIGITAL OUT SOCKET The music signal of this socket is digital Connect the output to the respective digital input of a digital amplifier for example NAMES AND FUNCTIONS Control Unit 1 OPEN CLOSE Press it to open and close the disc holder The main unit also includes OPEN CLOSE buttons The disc holder cannot be opened during playback so stop playback before pressing the button 2 SGL CTN Single Continuous Button Press it to switch between the single and continuous play modes The SINGLE mode is indicated by the SINGLE indicator on the LCD 3 CD MODE Press this button to switch the time display among the
6. Please note thatthe Fader start function only works with the appropriate mixers Insert the CD and select the desired track Start playback from your mixer Relay In the Relay operation the device automatically switches to the other player after every track Inthis way you have the possibility to enlarge the music program by using several CDs To start press the Relay button Press the Single button the display shows SINGLE on both CD players Start playback of CD1 As soon as the current track of CD71 is finished the player automatically starts CD2 The first CD player goes into Pause mode Press the single button again for continuous mode the SINGLE display is not lit When playback of all tracks of CD1 is finished the player automatically starts CD2 and Cd1 is goes into pause mode You can load anew CD or memorize a Cue point for either player in the Pause Mode When playback of all tracks or the current track of CD2 is finished the player automatically starts CD1 and CD2 goes into pause mode CAUTION The Relay operation does not work properly if the two CD players are connected to different power amplifiers 11 BEFORE SWITCHING OFF THE POWER When you have finished using the CD player before switching off the power be sure that the disc holder had been closed with the OPEN CLOSE button CAUTION Do not forcibly close the disc holder when the power is off PWER OFF PWER OFF D
7. it is damaged or deformed it may cause electric shock or malfunction when used When removing from wall outlet be sure to remove by holding the plug attachment and not by pulling the cord 2 Inorder to prevent electric shock do not open the top cover If a problem occurs contact your dealer 3 Donot place metal objects or spill liquid inside the CD player Electric shock or malfunction may result Please record and retain the Model name and serial number of your set shown on the rating label Model No Serial No CAUTION TO REDUCE THE RISK A OF ELECTRIC SHOCK DO NOT CAUTION REMOVE THE COVER OR BACK wx sonora THERE ARE SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product s enclosure that may be of sufficient mag nitude to constitute a risk of electric shock to persons The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance servicing instructions in the literature accompanying the appliance e FORU S A amp CANADA MODEL ONLY CAUTION TO PREVENT ELECTRIC SHOCK DO NOT USE THIS POLARIZED PLUG WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CANBE FULLY INSERTED T
8. ANGE Choose from pitch percentages of 4 8 16 18 PITCH LOCK Use this button to enable or disable BPM adjustment with the pitch sliders BPM adjustment with the pitch sliders is enabled when the PITCH LED lights 19 PITCH DOWN The CD slows down while this button is pressed Release the button to return to the original BPM 20 PITCH UP The CD speeds up while this button is pressed Release the button to return to the original BPM 21 RELAY Press this button when Disc 1 ends the CD player will automatically change to Disc 2 and when Disc 2 ends it will return to Disc 1 etc 22 RELAY LED 23 PITCH 4 LED 24 PITCH 8 LED 25 PITCH 16 LED 26 PITCH LOCK LED 27 FADER START Via the Control socket the respective CD player can be remotely controlled If you are using a mixer with fader start function connect the player with the Control Out socket Please note that these sockets must never be connected with any voltage 28 CONTROL CONNECTOR Connect this connector to the REMOTE connector on the main unit using the included control cord CONTROLS AND FUNCTIONS gt O gt HE CUE JEOLDER TRACK SINGLE MP3 remain FAUTO CUE Mille SE O AUTO CUE This will indicate if the Auto Cue is or off Press and hold the SGL CTN for 1 sec to turn the Auto Cue func
9. O PREVENT BLADE EXPOSURE NOTE This CD player uses the semiconductor laser To allow you to enjoy music at a stable operation it is recommended to use this in a room of 5 C 41 F 35 C 95 F RATING LABEL CLASS 1 LABEL CAUTION USE OF CONTROLS OR ADJUSTMENTS OR REFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE THE COMPACT DISC PLAYER SHOULD NOT BE ADJUSTED OR REPAIRED BY ANYONE EXCEPT PROPERLY QUALIFIED SERVICE PERSONNEL DOUBLE INSULATED WHEN SERVICING USE ONLY IDENTICAL REPLACEMENT PARTS NOTE This unit may cause interference to radio and television reception Line Voltage Selection for multiple voltage model only The desired voltage may be set with the VOLTAGE SELECTOR switch on the rear panel using a screwdriver Do not twist the VOLTAGE SELECTOR switch with excessive force as this may cause damage If the VOLTAGE SELECTOR switch does not mov smoothly please contact a qualified serviceman NOTE ON USE Allow for sufficient heat dispersion when installed in a rack Handle the power cord carefully Hold the plug when unplugging the cord Keep the set free from moisture water and dust Unplug the power cord when not using the set for long periods of time Do not obstruct the ventilation holes For sets with ventilation holes Do not let foreign objects in
10. Stanton C 502 stgnt 9 0 USER MANUAL IMPORTANT SAFETY PRECAUTIONS 1 Read Instructions All the safety and operating instructions should be read before this product is operated 2 Retain Instructions The safety and operating instructions should be retained for future reference 3 Heed Warnings All warnings on the appliance and in the operating instructions should be adhered to 4 Follow Instructions All operating and use instructions should be followed 5 Water and Moisture The appliance should not be used near water for example near bathtub washbow l kitchen sink laundry tub in a wet basement or near a swimming pool and the like 6 Wall or Ceiling Mounting The product should be mounted to a wall or ceiling only as recommended by the manufacturer 7 Heat Appliance should be situated away from heat sources such as radiators heat registers stoves or other appliances including amplifiers that produce heat 8 Power Sources This product should be operated only from the type of power source indicated on the rating label If you are not sure of the type of power supply to your home consult your product dealer or local power company For products intended to operate from battery power or other sources refer the operating instructions 9 Grounding or Polariz
11. ated 12 PITCH METER Shows the percentage change in pitch of the song The meter will display the pitch percentage applied by the PITCH SLIDER 13 TIME DISPLAY This displays the Minutes Seconds and Frames The meter will display either the elapsed time or remaining time of a track 14 CHARACTER DISPLAY This will display the name of the file artist and title when a Mp3 disc is loaded 15 TOTAL REMAIN INDICATOR When TOTAL and REMAIN are visible this indicates that the Time Display is showing total remaining disc time 16 REMAIN INDICATOR When the REMAIN indicator is visible this indicates that the Time Display is showing remaining track time 17 ELAPSED INDICATOR Itis for showing time as it is taking place OPERATIONS 7 Loading discs Opening and Closing the Disc Holder Turn the unit power on Press the OPEN CLOSE button to open the disc holde OPEN CLOSE buttons are provided on both the main unit and control unit The disc holder cannot be opened during playback to prevent playback from being interrupted if the OPEN CLOSE button is pressed accidentally Stop the playback first then press the OPEN CLOSE button Hold the disc by the edges and place it in the disc holder then press the OPEN CLOSE button again to close the disc holder The unit will show the total track number and the total playing time for about 2 seconds then enter the cue condition the cue point will be set to the mu
12. ation This product may be equipped with a polarized alternating current line plug a plug having one blade wider than the other This plug will fit into the power outlet only one way This is a safety feature If you are unable to insert the plug fully into the outlet try reversing the plug If the plug should still fail to fit contact your electrician to replace your obsolete outlet Do not defeat the safety purpose of the polarized plug 10 Power Cord Protection Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them paying particular attention to the cord in correspondence of plugs convenience receptacles and the point where they exit from the appliance 11 Cleaning The appliance should be cleaned only as recommended by the manufacturer Clean by wiping with a cloth slightly damp with water Avoid getting water inside the appliance 12 Non use Periods The power cord of the appliance should be unplugged from the outlet when left unused for a long period of time 13 Object and Liquid Entry Care should be taken so that objects do not fall and liquids are not spilled into the enclosure through openings 14 Damage Requiring Service The appliance should be serviced by qualified service personnel when The power supply cord or the plug has been damaged or Objects have fallen or liquid has been spilled into the appliance or The appliance has been e
13. ausing e Press the PLAY PAUSE button to switch between play and pause e The play indicator flashes when the pause mode is set Figure 6 show the relationship between the play and pause 2 4 6 y gt 3 7 1 5 Figure 6 The player has completed the cue or pause operation Pausing and is waiting for the play start command Playback resumes when the PLAY PAUSE button When the PLAY PAUSE button is pressed and enter is pressed again play mode is entered Playing Playing The pause mode is set when the PLAY PAUSE button is pressed again Cueing Cueing is the action of preparing for playback Press CUE button the player will enter cue mode the playback returns to cue point and enter pause condition the cue indicator lights up and the play indicator flashes When PLAY PAUSE button is pressed play starts from the cue point When the track search operation is completed after pressing the SKIP buttons the player automatically finds the position at which the sound starts and cues there Auto Cue If the CUE button is pressed after the search operation or the scanning operation the playback returns to cue point and enters pause condition Figure 7 1 shows the relationship between the play and back cue operations 2 8 2 4 6 8 L oa pnb y 15 1 5 9 9 Figure 7 1 The player has compl
14. change the BPM temporarily 1 Pitch Slider To adjust the BPM by sliding the pitch slider up or down press the PITCH button to turn on the PITCH adjustment function before use Slide the pitch slider up to decrease BPM or down to increase BPM The adjustment range is 4 8 16 ae Bending The BPM increases or decreases respectively while the PITCH BEND or PITCH BEND button is pressed x The BPM increase depends on how long you hold the button If you hold the button for about 1 2 second the BPM will go either to 16 for PITCH BEND or 16 for PITCH BEND If you tap the button the BPM will only change a little so you can change the beat slightly without audible changes in the music The will return to the tempo indicated by the Pitch slider when you let go of the PITCH BEND or Figure 11 1 shows an example of how to use the pitch bend function In this example both players playing and the BPM has already been matched with the pitch sliders CD1 beat bass beat 2 iL BA bass beat H bass beat The bass beats also match PITCH BEND 10 OPERATIONS 12 13 Fader start You have the possibility to start the respective CD player directly from the mixer Make sure that the Control socket is connected with the respective socket on the mixer Additionally the Audio out sockets have to be connected with the Line input sockets of your mixer
15. e merchandise shall not exceed the price received by Stanton from our purchase of such merchandise In no event will Stanton be liable for any special incidental or consequential damages including loss of use loss of profit and claims of third parties however caused whether by the negligence of Stanton or otherwise To the extent permitted by law and except as otherwise provided above Stanton disclaims any express or implied warranties of merchantability or fitness for a particular purpose The above warranty provides you with specific legal rights You may also have additional rights which are subject to variation from state to state and country to country If there is a dispute regarding the warranty of merchandise that does not fall under the warranty conditions stated above please include a written expla nation with the merchandise when returned pursuant to the terms and conditions set forth herein Please register your product online at www stantondj com
16. elapsed time and remaining time and total remaining time of the disc 4 TRACK BACKWARD Use this button to go back to the beginning of the current track or select a previous track for playing 5 10 FOLDER CD mode use this button to skip ahead 10 tracks Mp3 mode press this button to select the next folder 6 TRACK FORWARD Use this button to skip to the next CD track 7 8 F FORWARD F BACKWARD Press these buttons to perform scan function during pause mode or during play mode 9 PITCH SLIDER Use the slider to adjust the CD pitch Slide up to decrease pitch down to increase pitch 10 LCD 11 LOOP IN Used for setting a start loop point and releasing the loop action 12 LOOP OUT Used for setting the end loop point and releasing the loop action 13 RELOOP Depending on mode as explained further this button is used for either repeating a previously set loop or seamlessly stuttering on the last set cue point 14 JOG WHEEL When the dial is turned during CD pause the point at which the sound is being produced moves by anumber of frames corresponding to the number of clicks Clockwise moves the point forward counterclockwise moves the point backward 15 CUE Cue Button Press the CUE button during playback to return to the position at which playback started 16 PLAY PAUSE Use this button to start playback Press once to start playback once again to set the pause mode and once more to resume playback 17 PITCH R
17. eted the cue or pause operation is Pressed again and is waiting for the play start command Pausing When the PLAY PAUSE button is pressed playback When the PLAY PAUSE button is pressed again starts and the cue point is stored in the memory Playing Playing Press the CUE button The pause mode is set when the PLAY PAUSE button The pickup returns to the cue point Back Cue Cue point setting When play starts from pause by pressing the IN button or Scanning or Frame Search also skip to a new track by using skip button the begin play point will be set to the new cue point When a new cue point is set the cue indicator lights by flash for about 1 second NOTE During cue mode if the CUE button is pressed and hold playback will start from the cue point when the button is released the player will return to the cue mode automatically it allows you to check the cue point Jog Wheel The jog wheel serves two functions depending on the current operating mode The jog wheel will act as a slow frame search control when the unit is in pause or cue mode allowing you to set a specific cue point or find a particular starting point The wheel also works as a momentary pitch bend during playback Turning the wheel clockwise will increase the pitch percentage up to 16 and turning the wheelin the counterclockwise direction will decrease the pitch percentage up to 16 The pitch bend will be determined by how fast you turn the wheel
18. mended by the manufacturer 19 Lightning For added protection for this product during a lightning storm or when it is left unattended and unused for long periods of time unplug it from the wall outlet and disconnect the antenna or cable system This will prevent damage to the product due to lightning and power line surges 20 Replacement Parts When replacement parts are required be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part Unauthorized substitutions may result in fire electric shock or other hazards 21 Safety Check Upon completion of any service or repairs to this product ask the service technician to perform safety checks to determine that the product is in proper operating condition 22 This product is in compliance with EUWEEE regulations Disposal of end of life product should not be treated as municipal waste Please refer to your local regulations for instructions on proper disposal of this product 23 Carts and Stands The appliance should be used only with a cart or stand that is recommended by the manufacturer An appliance and cart combination should be moved with care Quick stops excessive force and uneven surfaces may cause the appliance 5 and cart combination to overturn 24 This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions 1 this device may not cause ha
19. o not switch off the power when the disc holder is open Switch off the power after the disc holder has been closed with the OPEN CLOSE button COMPACT DISCS Precautions on handling compact discs Do not allow fingerprints oil or dust to getonthe surface of the disc Condensation will form if a disc is brought into warm area from a colder one such as outdoors in winter If the disc is dirty wipe it off with a soft dry cloth Do not use benzene thinner water record spray electrostatic proof chemicals or silicone treated cloths to clean discs Always handle discs carefully to prevent damaging the surface in particular when removing a disc from its case or returning it Do not bend the disc Do not apply heat Do not enlarge the hole in the center of the disc Do not write on the label printed side with a hard tipped implement such as a pencil or ball point pen Do not attempt to dry the disc with a hair dryer etc Precaution on storage After playing a disc always unload it from the player Always store the disc in the jewel case protect from dirt or damage Do not place discs in the following areas Areas exposed to directs sunlight for a considerable time Areas subject to accumulation of dust or high humidity Areas affected by heat from indoor heaters etc SPECIFICATIONS GENERAL Dimensions Main unit 482 W x 88 8 H x 251 D mm 19 W x 3 1 2 H x 9 4 5 D Control unit
20. rmful interference and 2 this device must accept any interference received including interference that may cause undesired operation CAUTION To reduce the risk of electric shock do not remove any cover No user serviceable parts inside Refer servicing to qualified service personnel only The lightning flash with arrowhead symbol within the equilateral triangle is intended to alert the use to the presence of un insulated dangerous voltage within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock The exclamation point within the equilateral triangle is intended to alert the user to the presence of important operation and maintenance servicing instructions in the literature accompanying this appliance CAUTION To prevent electric shock do not use this polarized plug with an extension cord receptacle or other outlet unless the blades can be fully inserted to prevent blade exposure IMPORTANT TO SAFETY IMPORTANT TO SAFETY WARNING TO PREVENT FIRE OR SHOCK HAZARD DO NOT USE THIS PLUG WITH AN EXTENSION CORD RECEPTACLE OR OTHEROUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PRESENT BLADE EXPOSURE TO PREVENT FIRE OR SHOCK HAZARD NO NOT EXPOSE THIS APPLIANCE TO RAIN OR NOISTURE TO PREVENT ELECTRICAL SHOCK MATCH WIDE BLADE PLUG TO WIDE SLOT FULLY INSERT CAUTION 1 Handle the power supply cord carefully Do not damage or deform the power supply cord If
21. sic starting point of the first track automatically Figure 2 1 Do not place any foreign objects inthe disc holder and do place more than disc the disc holder at a time Do not push the disc holderin manually when the power is off as this may result in malfunction and damages the player Selecting Tracks Press the SKIP button once to move to the next higher or lower track Hold the SKIP button to change tracks continuously higher speed When anew track is selected during playback playback begins as soon as the skip search operation is completed If the skip PPI button is pressed while at the last track the first track is selected In the same way if the skip button is pressed while at the first track the last track is selected Starting Playback Press the PLAY PAUSE button during the pause or cue condition to start playback The PLAY indicator will light The point at which playback starts is automatically stored in the memory as the cue point The pickup then returns to the cue point when the CUE button is pressed Back Cue a E Figure 4 1 Stopping Playback There are two ways to stop playback 1 Press the PLAY PAUSE button during playback to pause at that point 2 Press the CUE button during playback to return to the cue point and enter pause condition Back Cue T gt 58 Figure 5 OPERATIONS 6 P
22. the set Do not let insecticides benzene and thinner come in contact with the set Never disassemble or modify the set in any way For 220 volt use in USA USAnema style 220 volt plug For other countries use proper plug for the local outlet MAIN FEATURES 1 8 times oversampling 1 bit D A converter 2 4 different scan speeds 3 Frame search 4 Auto cue 5 6 7 20 sec Anti shock Pitch display MP3 playback MAIN UNIT 2062 u UD S 1 POWER 2 DISC HOLDER 5 AUDIO OUTLANDR 3 OPEN CLOSE 6 DIGITAL OUT SOCKET 4 REMOTE CONTROL CONNECTOR 7 VOLTAGE SELECTOR FOR DUAL VOLTAGE ONLY MAIN FEATURES CONTROL UNIT 1 OPEN CLOSE 2 SINGLE CONTINUE 3 TIME 4 TRACK BACKWARD 5 10 FOLDER 6 TRACK FORWARD 7 F BACKWARD 8 F FORWARD 9 PITCH SLIDER 10 LCD PLAY PAUSE PITCH RANGE PITCH LOCK PITCH DOWN 21 RELAY 22 RELAY LED 23 PITCH 4 LED 24 PITCH 8 LED 25 PITCH 16 LED 26 PITCH LOCK LED 27 FADER START CONNECTOR 28 CONTROL CONNECTOR PAUTO CUE gt CUE SINGLE BD DD DD DD DD DD DD DD DD FOLDER TRACK L geet Mie 11 I
23. tion on and TRACK INDICATOR This 3 digit indicator displays the current track The number displayed in the track indicator is a direct reference to a track being selected or a track in play pause or cue mode FOLDER TRACK INDICATOR This indicator shows you if you are looking at the track number or the folder number PLAY PAUSE INDICATOR When the unit isin play mode the PLAY indicator will glow when the drive is in pause mode the PAUSE indicator will glow CUE INDICATOR This indicator will glow when the unit is in CUE mode and will flash every time new CUE POINT is set SINGLE INDICATOR This indicates that the CD drive is in single play mode The track will play once and return to CUE mode If the single indicator is not on the unitis in continuous mode and the drive will play all the remaining tracks onthe disc until you stop it or power is interrupted MP3 INDICATOR This will indicate that a Mp3 disc is loaded in the drive BAR INDICATOR This bar gives a visual approximation of a track or disc s remaining time This bar will begin to flash when a CD is ending or a track if the unitis in SINGLE mode 9 LOOP INDICATOR Appears when the CD is repeating a particular area with the music on the CD 10 RELOOP INDICATOR Appears when the CD has a loop set previously and can go back loop again 11 PITCH INDICATOR Indicator will light up when the Pitch is activ
24. xposed to rain or The appliance does not appear to operate normally or exhibits a marked change in performance or The appliance has been dropped or the enclosure damage CAUTION RISK OF ELECTRIC SHOCK DONOT OPEN 15 Servicing The user should not atempt any service to the appliance beyond that described in the operating instructions All other servicing should be referred to qualified service personnel 16 Ventilation Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from overheating and these openings must not be blocked or covered The openings should never be blocked by placing the product on a bed sofa rug or other similar surface This product should not be placed in a built in installation such as a bookcase or rack unless proper ventilation is the manufacturers instructions have been adhered to 17 Attachments Do not use attachments not recommended by the product manufacturer as they may cause hazards 18 Accessories Do not place this product on an unstable cart stand tripod bracket or table The product may fall causing serious injury to a child or adult and serious damage to the product Use only with a cart stand tripod bracket or table recommended by the manufacturer or sold with the product Any mounting of the product should follow the manufacturers instructions and should use amounting accessory recom
Download Pdf Manuals
Related Search