Home

Sony KP-44DX2 Projection Television User Manual

1. MODEM connection Oo Lcisi E connect to the S VHS Hi8 DVC camcorder 8mm Hi8 DVC camcorder F To avoid If you want to record Ine all A picture signals from any p ai distortion 5 external equipment See ac Do not DVD connect the recording connect device to the scart equipment to D and B ale a connectors G at the same VCR SS el time Decoder DVD Acceptable input signal Available output signal No inputs Audio signal E Audio video and RGB signal Video audio from TV tuner Audio video and S video signal Video audio from selected source D S Video signal No output J Video signal No output Audio signal No output No input Audio signal to headphones continued 32 Additional Information Additional Information when connecting equipment Connecting a VCR We recommend you connect your VCR to the socket using a scart lead If you do not have a scart lead use the Manual Programme Preset section on page 20 to tune in the channel of the VCR test signal to TV programme number 0 Also refer to your VCR instruction manual to get the VCR test signal Connecting a SmartLink VCR e SmartLink is a direct link between your projection TV set and a VCR e For SmartLink you need a VCR which supports SmartLink NexTView Easy Link or Megalogic Easy Link is a trademark of Philips Corporation Megalogic is a trademark of Grundig Corporation e For more info
2. Exit The Digital Menus 21 The Digital INFO Menu The Digital INFO menu gives you information on the 8 8 y programmes currently being shown as well as the those programmes which are on next 22 Pickid Lake American talk show Today s guests are sporting a variety of faice books 09 05 09 25 The Wright Stuff 05 To do this With the TV in Digital mode press the G button to access this menu Next read below how to operate each option 09 05 09 25 DIGITAL INFO DISPLAY This display gives you a brief description of the next programme in the schedule To do this Press the button If the programme box is blank there is no information currently available To return to the starting point press the button repeatedly until the description for the current programme reappears To change channels while the Digital INFO display is on screen press the relevant numbered buttons on the remote control Press the MENU button to exit from this display SUBTITLES This feature will place Digital subtitles on the screen similar to selecting p 888 in analogue Teletext mode To do this With the Digital INFO display on the TV screen press the RED button to access the Subtitles pop up menu Press the or button to highlight the language required then press OK to select To remove subtitles from the TV screen access the Subtitles
3. N KZ SLEEP TIMER This option allows you to select a time period for the TV to switch itself automatically into the standby mode To do this AUTO FORMAT This option allows you to automatically change the aspect ratio of the screen Auto Format BO AV2 Output AUTO PIP Input AW PIP Position Select AV Enter gt The Features menu allows you to alter various adjustments of the TV To do this Once you have entered into this menu press or to select the desired option Next read below how to operate into each option After selecting the option press then press or to set the time period delay max of 4 hours e While watching the TV you can press the G button on the remote control to display the time remaining e One minute before the projection TV switches itself into standby mode the time remaining is displayed on the TV screen automatically To do this After selecting the option press Then press or to select On if you wish the TV set to automatically switch the screen format according to the broadcast signal or Off if you wish to keep your preference Finally press OK to store Even if you have selected On or Off in the Auto Format option you can always modify the format of the screen by pressing 4 repeatedly on the remote control to select one of the following formats Smart Imitation of wide screen effect for 4 3
4. a 5 Press OK key to enter on page 22 Refer to the Main Menu section Audio re on page 22 EL Control Refer to the section Detal Setup Wallpaper on page 23 07A VVKS 00 y Refer to the section REC Press OK key to enter Timer on page 22 Main Menu A Favorite Programme Refer to the section Wallpaper Parental Control Parental Control on Auto Tuning Detail Set up page 24 CAM Set up y Press OK key to enter Exit Main Menu A Favorite Programme Wallpaper Refer to the section Parental Control 11 ANG TONNE Auto Tuning on Detail Set up page 24 CAM Set up y Press OK key to enter Refer to the section Manual Tuning on page 26 Refer to the section PIN Main Menu Detail Set up 1 i z Code on page 27 Favorite Programme Mandal Tunng PoR trol PIN Code RUG ane ae Software Download Refer to the section Detail Set u System Information i m etail Set up Software Download on CAM Set up y M page 27 Press OK key to enter Press OK key to enter Back S Refer to the section System Information on page 27 Main Menu A Favorite Programme Wallpaper 7 Parental Control Refer to the section CAM Auto Tuning Detail Set up Set up on page 25 CAM Set up y Press OK key to enter
5. General TV Menus MENU icture Adjustmen icture Adjustmen sl ra i Picture Mode Personal jf cone o Lv Contrast m m Brightness B Brightness m P fy er lt e gt Sms Refer to the section Picture Adjustment on page 15 J oeur J ne reucion BOTOI Select AV Enter Menu gt Select AV Enter gt t EW ae ji PI SE J Be Bass D m 7 rae z 0 ZJ R g Eg Ees m gt osoo ms Refer to the section Sound Adjustment on page 16 TV Speakers BO E e Select AV Enter Menu gt Select AV Enter gt SleepTimer Oft eo l AN Air Kzl cen RM lt WE Pemu awe ae s a a Refer to the section Sleep Timer on page 17 Select AV Enter Menu gt Select AV Entel Features Sleep Timer KZ PP mp PIP Position Refer to the section Auto Format on page 17 Select AV Enter gt Features Sleep Timer Auto Format KZ PIP Input PIP Position Refer to the section AV2 Output on page 18 Select AV Enter gt Features Sleep Timer Auto Format AV2 Output Refer to the section PIP Input on page 18 PIP Position Select AV Enter gt Features Sleep Timer Auto Format AV2 Output PIP Input Refer to the section PIP Position
6. feature you must first set your PIN code This option allows you to set an age limit for programmes on the TV If any films or programmes classed above the age limit you have set are broadcast you will be requested to enter your PIN code before viewing is allowed To do this a If you have not already set a PIN code 1 Once you have entered into the Main Menu as it is explained in the previous page press the or button to highlight Parental Control then press the OK button to display the Parental Control menu 2 Press the RED button to display the PIN entry box on screen 3 Using the numbered buttons on the remote control enter a 4 digit number of your choice As you enter each digit it will be represented by a in the PIN entry box Enter the code again to confirm This will be your PIN number for the future please use a number you can easily remember 4 Press the OK button to confirm your PIN code 5 Press the BLUE button twice to return to the Main menu 6 Finally follow steps 2 4 of the instructions below b If you have already set a PIN code 1 Once you have entered into the Main Menu as it is explained in the previous page press the or button to highlight Parental Control then press the OK button to display the Parental Control menu 2 Using the numbered buttons on the remote control enter your 4 digit PIN code As you enter each digit it will be represented by
7. Hue Press or to decrease or to increase the green tones This option only appears for NTSC signal e g USA video tapes Sharpness Press or to soften or to sharpen the picture Sharpness can only be altered if Picture Mode is set to Personal Reset Press OK to reset the picture to the factory preset levels Noise Reduction This option is set to AUTO to automatically reduce the picture noise visible in the broadcast signal To cancel this function select Off instead of AUTO Noise Reduction can only be altered if you are in Analogue mode The General TV Menus 15 The Sound Adjustment Menu MENU QQ LEL 16 Picture Adjustment Picture Mode Contrast Brightness Colour Sharpness Reset Noise Reduction AUTO E E E E E E E E Select AV Enter Menu gt 4 The Sound Adjustment menu allows you to alter the sound adjustments To do this Once you have entered into this menu press or to select the desired option then press Next press or repeatedly to adjust it and finally press OK to store the new adjustment Effect Natural Treble ne a Bass E m Balance m m gt Reset A Dual Sound Stereo Auto Volume M TV Speakers BO Select AV Enter Menu gt Effect A D ere Treble Bass Balance Reset Dual Sound Auto Volume The General TV Me
8. an environmental friendly way D 8 Installation Switching On the Projection TV and Automatically Tuning The first time you switch on your TV a sequence of menu screens appear on the TV enabling you to choose the language of the menu screen and search and store all available channels TV Broadcast However if you need to change any of these settings at a later date you can do that by selecting the appropriate option in the Set Up menu or by pressing the Auto Start Up Button I on the TV set 1 Connect the Projection TV plug to the mains socket 220 240V AC 50Hz O The first time that the TV set is connected it is usually turned on If the TV is off press the on off button on the TV set to turn on the TV The first time you switch on the TV a Language menu displays automatically on the TV screen sro the OK button to confirm your selection From now on all the menus will appear in the selected language gt in 2 Press the or button on the remote control to select the language then press Nederlans y Select Language AV Confirm OK 3 The Auto Tuning menu appears on the screen Press the OK button to select Yes Do you want to start automatic tuning Yes No 4 The projection TV starts to automatically search and store all available broadcast channels for you as follows E E N a a The Digital autotune display appears on screen and the search and sto
9. below now to operate each option BLUE N Main Menu A Favorite Programme Wallpaper Parental Control Auto Tuning Detail Set up CAM Set up M Press OK key to enter Exit Detail Set up A Manual Tuning PIN Code Software Download System Information y Press OK key to enter Back MANUAL TUNING This option allows you to select a channel number from the displayed list and change the digital services of that channel To do this 1 The Digital Menus Once you have entered into the Detail Set up menu press the or button to highlight Manual Tuning then press the OK button to display the Manual Tuning menu Press the or button to highlight the chosen channel number for your new channel If you do not wish to select any of the programme numbers listed press the RED or GREEN button to display the previous or next 5 programme numbers on the list With your channel number highlighted press the OK button to display the Manual Programme Search screen Press the or button if you wish to change the channel number then press the button to make the select search box active Press the or button to begin the search process The words Searching Down or Searching Up appear in the select search box to indicate that the TV is searching If no Digital services are found on the channel you have chosen the channel
10. broadcast 4 3 Conventional 4 3 picture size full picture information 14 9 Compromise between 4 3 and 16 9 picture size Zoom Widescreen format for letterbox movies Nir N Wide For 16 9 broadcast Full picture information VA AN _ gt Wide In Smart Zoom and 14 9 modes parts of the top and bottom of the screen are cut off Press or to adjust the position of the image on the screen e g to read subtitles continued The General TV Menus 17 18 o e 6oe AV2 OUTPUT This option allows you to select the source to be output from the Scart connector G 2 9 2 so that you can record from this Scart any signal coming from the projection TV or from an external equipment connected to the Scart connector G gt 1 lt 1 or side connectors 93 or 3 and 3 If your VCR supports SmartLink this procedure is not necessary To do this Once you have entered into the Features menu as it is explained in the previous page and after selecting the option press Then press or to select the desired output signal e TV to output the aerial source e AVI to output sources connected to G1 1 e AV3 to output sources connected to amp 3 and 3 e YC3 to output sources connected to 93 and 3 e AUTO to output the signal that is being viewed on the TV e If you select AUTO the output signal will always be the same one that is displayed on the screen e If you have conne
11. minutes To reset your brand of DVD or VCR please repeat the above steps A small label is added inside the battery door to allow you to record your brand codes e Not all brands are covered and not all models of every brand may be covered 5 When you wish to use the remote control to operate the TV again press the Media Selector button until the TV green light illuminates Don t forget to select VCR or DVD using the Media Selector button every time you wish to operate that equipment with this remote control VCR Brand List DVD Brand List SONY VHS 301 302 303 308 309 SONY BETA 303 307 310 SONY DV 304 305 306 DAEWOO 342 343 GRUNDIG 358 355 360 361 320 351 Jvc 314 315 322 344 352 353 354 348 349 PHILIPS 311 312 313 316 317 318 358 359 34 Additional Information Optimum Viewing Area For the best picture quality try to position the projection TV so that you can view the screen from within the areas shown below Horizontal viewing area Optimum viewing position Vertical viewing area Min im um Optimum viewing position Additional Information 35 Technical Specifications TV system I DVB T Colour system PAL SECAM NTSC 3 58 4 43 only Video In MPEG 2 MP NL Channel Coverage I UHF B21 B69 Projected picture size 44 approx 112 cm measured diagonally Rear Terminals eG 1 1 21 pin scart connector CENELEC standard including audio vide
12. number changes up or down automatically and the search continues When all services allocated to the selected channel have been found the service selection screen is displayed Press the or button to find and highlight the service you wish to allocate to the channel number selected in Step 2 then press the OK button to display the channel selection screen Repeat Steps 2 to 6 if you wish to manually add more channels to your TV Press the BLUE button to return to the Digital Set up menu or press the MENU button to exit from this menu continued PIN CODE This option allows you to set a 4 digit PIN code To do this 1 Once you have entered into the Detail Set up menu as it is explained in the previous page press the or button to highlight PIN Code then press the OK button to display the PIN Code menu 2 Enter your PIN code using the numbered buttons on the remote control If you enter a wrong number press the RED button to clear and start again 3 Once you have entered a 4 digit code a cursor will appear in the second PIN Code box Enter your new PIN code once again as confirmation 4 When both PIN codes match a message appears to inform you that your new PIN code has been accepted This is the PIN code you must use in future 5 Press the BLUE button to return to the Digital Set up menu or press the MENU button to exit from this menu SOFTWARE DOWNLOAD Periodically Sony issues upda
13. pop up menu and select Off Press the MENU button to exit from this menu AUDIO This feature allows you to listen to the broadcast in different languages when the programme is broadcast in multiple languages To do this With the Digital INFO display on the TV screen press the GREEN button to access the Audio pop up menu Press the or button to highlight the language required then press OK to select Press the MENU button to exit from this menu REC TIMER If you highlight a current programme the REC feature allows you to automatically set your VCR to record the selected programme To do this With the Digital INFO display on the TV screen press the YELLOW button to access the REC pop up menu If your VCR does not have Smartlink a message is displayed reminding you to manually set your VCR Press the RED button to continue or press the BLUE button to return to the INFO display If you highlight a future programme the Timer feature allows you to automatically set your VCR to record the selected programme or have the TV switch to the correct channel automatically when the selected programme starts Press the RED button and your VCR will automatically record the selected programme when it starts only if your VCR has SmartLink facility or press the GREEN button if you wish the programme to appear on your TV screen when transmission begins Press the MENU button to exit from this menu
14. you do not have a SmartLink VCR a message appears on screen to inform you Press the RED button to store the programme settings on the TV then set the timer recording function on your VCR to correspond with the programme you have stored for recording e When a programme has been stored for recording a solid bar appears in the EPG display directly under the timer bar This solid bar shows you the amount of time allocated to a recording and reminds you that you are unable to record any other programmes during that period of time To set the Manual Timer 1 With the EPG menu on screen by pressing press the BLUE button to display the Timer List menu Press the RED button to display the Manual Timer Record menu If your VCR does not have SmartLink a message will be displayed reminding you to set your VCR timer Press the or buttons to select the correct date Press the button to highlight the start time CE Press the or buttons to select the start time Press the button to highlight the stop time Press the or buttons to select the stop time Press the button to highlight the programme Press the or buttons to select the programme Press the OK button to store The Timer List menu is displayed The event is now set to the Timer List Press the YELLOW button to delete the timed event or press the BLUE button to return to the main EPG screen 7 Press the RED button and repeat steps 3 to 6 if you wish to st
15. 4 095 661 11 1 409566111 100 HZ WIDE Digital Projection TV Operating Instructions _ si awlttttti a a U U CE Before operating the TV please read the Safety Information section of this manual Retain this manual for future reference KP 44DX2 2003 by Sony Corporation NOTICE FOR CUSTOMERS IN THE UNITED KINGDOM A moulded plug complying with BS1363 is fitted to this equipment for your safety and convenience Should the fuse in the plug supplied need to be replaced a 5 AMP fuse approved by ASTA or BSI to BS 1362 i e marked with or Y must be used When an alternative type of plug is used it should be fitted with a 5 AMP FUSE otherwise the circuit should be protected by a5 AMP FUSE at the distribution board If the plug supplied with this equipment has a detachable fuse cover be sure to attach the fuse cover after you change the fuse Never use the plug without the fuse cover If you should lose the fuse cover please contact your nearest Sony service station How to replace the fuse Open the fuse compartment with a blade screwdriver and replace the fuse e IMPORTANT If the plug supplied is not suitable for the socket outlets in your home it should be cut off and an appropriate plug fitted in accordance with the following instructions The wires in this mains lead are coloured in accor
16. E ENE ETSN EA EE EE AEEA NEN EEE ATEEN 35 eae e cert eea oTa R E E A E E E E A A E A eee er kee or 36 Leea n e EEE E E T EE E A E E E E E eer 37 Television Analogue Channel Guide for United Kingdom e sseeesseerssisrssistrerstsrisisrtstersrtsteststeststettststtststestetettntartstettrrstestnrertseeten 38 Ia a Sco A A E E TA E T A ENE E A N A E T E E sone raneaansoncse aes back cover Table of Contents 3 Safety Information This set is to operate on a 220 240V AC supply only Take care not to connect too many appliances to the same power socket as this could result in fire or electric shock Do not open the cabinet and the rear cover of the TV Refer to qualified service personnel Do not cover the ventilation openings of the TV For ventilation leave a space of at least 10cm all around the set Clean the screen and cabinet with a soft lightly dampened cloth Do not use any type of abrasive pad alkaline cleaner scouring powder or solvent such as alcohol or benzine or antistatic spray As a safety precaution unplug the TV before cleaning it Place the TV on a secure stable stand Never attempt to move the TV and stand together always move the TV and stand separately Do not place the TV on its side or face up Do not allow children to climb on to it For environmental and safety reasons it is recommended that the TV set is not left in standby mode when not in use Disconnect from the mains However some TVs may h
17. a in the PIN entry box If you have forgotten your PIN code please use 9999 This PIN code will always be accepted 3 With the Age box highlighted press the or button to set the age limit you desire then press the OK button to confirm your setting 4 Press the BLUE button to return to the Main Menu or press the MENU button to exit from this menu AUTO TUNING This option allows you to automatically re tune all available Digital channels To do this 1 Once you have entered into the Main Menu as it is explained in the previous page press or button to highlight Auto Tuning then press the OK button to display the Auto Tuning menu 2 Next press the RED button to begin tuning in all available Digital channels e If you wish to cancel the Auto Tuning process press the BLUE button e Press the BLUE button to return to the Main Menu or press the MENU button to exit from the menu The Digital Menus DETAIL SET UP This option access to a new menu window which contains the following features Manual Tuning PIN Code Software Download and System Information All these features are explained from next page on CAM SET UP Always switch the TV off before inserting or removing the CAM This option allows you to access a Pay Per View service once you have obtained a Conditional Access Module CAM and a viewing card Please contact your nearest Pay Per Vi
18. a Selector is switched to VCR press this button to record programmes Selecting Digital Analogue TV mode Press this button to switch between Digital or Analogue mode to switch off PIP Analogue Teletext or Video Input a In Digital mode press this button to display the Digital Menu See page 22 b In Analogue mode press this button to display all on screen indications such as channel number etc Press again to cancel Selecting screen format Press this button repeatedly to change the format of the screen See page 17 Swapping screens Whilst you are in PIP mode press this button to swap the two screens PIP Picture in Picture Press this button to watch another source in a small picture PIP within the main TV picture Press again to cancel To select the source you want to watch see page 18 This feature is available only in Analogue mode or if the last channel viewed was an Analogue TV channel Muting the Sound Press this button to mute TV sound Press again to restore the sound D Besides TV functions buttons labelled and are also used for Analogue Teletext operation For more details please see page 28 6 Overview Overview of Projection TV Buttons Programme Up or Down Buttons Select TV channels Volume Press on the control On Off mark Selecting Huone switch Input source Standby indicator A uto Convergence Button Pre
19. aerial e Change your aerial to cover the channels used by digital programmes Contact a local installer e Ensure aerial is correctly aligned to transmitter e Ensure aerial is plugged directly into the TV not through other equipment e Check that the optional equipment is on and press the button repeatedly on the remote control until the correct input symbol is displayed on the screen see page 33 e Press the button on the remote control e Check that TV Speakers is On in the Sound Adjustment menu see page 16 e Check that headphones are not connected e Using the menu system select the Picture Adjustment menu and select Reset to return to factory settings see page 15 e This is not a malfunction Press the number buttons on the remote control to select the desired channel e Adjust the colour registration For more details please refer to Adjusting Colour Registration Convergence section on page 10 e Using the menu system select the Manual Programme Preset menu and adjust Fine Tuning AFT to obtain better picture reception see page 20 e Using the menu system select the Noise Reduction option in the Picture Adjustment menu and select Auto to reduce the noise in the picture see page 15 e Turn off any equipment connected to the Scart connector on the rear of the projection TV e This is not a malfunction After 5 minutes viewing the same
20. ares amr iene 14 Terena NU fo 10g lt a andy i416 Renee enmeme ner etter Rene A nen Aine tte eh E Mare eer eer rte ere rere eee rere 15 dGlotzto a esalcbrs CoQ iolc apalci aha mEn Meena tene n Terie Teen rere ares er hte ee ere Serer te rer ene te een trent ne an eer reer eee ees 16 Ted calucs On lt 0 6 geen Reve eer rn em E ere reenter een er eet E E E ee ee er 17 i e AE eaaa iE A E E E E E E A E E EE E en tee ee ere 19 The Digital Menus eens eects sce eer tre vce E E E 21 Ori Screen Display Guide for the Digital Menus sccsscscsssnesnresnestatasernsniaschnuivasrs ops anmanape ots spletadaarmneesicadsobouaeuendinsa runetoatipeesepoumpapoens 21 me Bical ect BUN Yel BAY 2 oh Deere ner nes ener Nene O rr ee eee mre on Ree re en te een Cr ere 22 a Bical este lt 0 emails qi Renee etree aren etn errr et er EE ear nen etree NE eer 23 TeDe Dea ceo b iam relies Emenee nner ment TT ter try me TE aren keene rrr Ment nee nn ern er ey ee errr 26 Analogue TUN seca gases cet ec eee 28 Digital TSC ea a EE E cpt ergs eee eee 29 EPG Electronic Programme Guide 0 ccccccccccccssssesssssseessssssusssssssnessssssisesssssnessessssssssssssessessssusssssssusseesssuseesssueseesssneses 30 Additional Information Connie e orates atime E O T A E A N EN EEE O NO ee eee eer ee EN eee re ee 32 USD OP KON E E aE E E E R T GEE E O AER E O ET EE 33 Remote Control Configuration for VER DVD ages ac sper ini ioneii sitsa ee aa eee eee 34 OTM VIC WS A TE Aoire iia EE
21. ave features which require they are left in standby The instructions in this manual will inform you if this applies For your own safety do not touch any part of the TV power lead or aerial lead during lightning storms Never place the oa hot humid or excessively dusty places Do not install the TV where it may be exposed to mechanical vibrations Pull out the power lead by the plug Do not pull on the power lead itself Unplug the power lead before moving the TV Avoid uneven surfaces quick steps or excessive force If the set has been dropped or damaged have it checked immediately by qualified service personnel Additional Safety Information e After transporting the projection TV directly from a cold to a warm location or if the room temperature has changed suddenly pictures may be blurred or show poor colour over portions of the picture This is because moisture has condensed on the mirrors or lenses inside the projection TV Let the moisture evaporate before using the projection TV Never push objects of any kind into the set as this could result in a fire or electric shock Never spill liquid of any kind on the set If any liquid or solid object does fall into the cabinet do not operate the TV Have it checked immediately by qualified personnel To prevent fire or shock hazard do not expose the TV to rain or moisture To prevent fire keep inflammable objects or naked lights eg candles away from the TV Take ca
22. cted a decoder to the Scart G 2 2 or to a VCR connected to this Scart please remember to change back the AV2 Output to AUTO or TV for correct unscrambling PIP INPUT This option allows you to select the source you want to watch in the PIP screen To do this Once you have entered into the Features menu as it is explained in the previous page and after selecting the option press Then press or repeatedly to select the desired source AV1 AV2 AV3 or TV Finally press OK to store To watch the PIP screen with the selected source press the button on the remote control You can swap the screens by pressing the A button on the remote control PIP POSITION This option allows you to change the position of the PIP screen within the main screen To do this Once you have entered into the Features menu as it is explained in the previous page and after selecting the option press or to select the desired position Finally press OK to store The General TV Menus RLE Picture Adjustment Picture Mode Contrast Brightness Colour Sharpness Reset Noise Reduction AUTO L E L E E E L E Select AV Enter Menu gt 4 TIA Set Up Auto Tuning Programme Sorting Programme Labels AV Preset Manual Programme Preset Detail Set Up Select AV Enter Menu gt se
23. dance with the following code Blue Neutral Brown Live As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying the terminals in your plug proceed as follows The wire which is coloured blue must be connected to the terminal which is marked with the letter N or coloured black The wire which is coloured brown must be connected to the terminal which is marked with the letter L or coloured red Do not connect either wire to the earth terminal in the plug which is marked by the letter E or by the safety earth symbol or coloured green or green and yellow WARNING e To prevent the risk of electric shock do not insert the plug cut off from the mains lead into a socket outlet This plug cannot be used and should be destroyed e To prevent the risk of fire or electric shock do not expose the unit to rain or moisture e Dangerously high voltages are present inside the set Do not open the cabinet Refer servicing to qualified personnel only Introduction Thank you for choosing this Sony 100 Hz Digital Projection TV Before operating the projection TV please read this manual thoroughly and retain it for future reference e Symbols used in the manual Important information e Buttons shaded white on the remote control show you the buttons you have to press to follow the Information on a feature sequence of the instructions e 1 2 Sequence of instruction
24. e Only for SmartLink VCRs e Do not switch off the TV once a programme has been set to record If you do not wish to view the programme being recorded press the TV I O button on the remote control to switch the TV into standby mode e Do not change channels or switch the TV to analogue mode once a programme has started recording or the recording will be cancelled e When a programme has been set to record and the TV is in standby mode the standby indicator on the front of the TV will flash green and red periodically to remind you that a programme has been set to record continued The Digital Menus The Digital Set up Menu The Wright Stuff 09 05 09 25 This menu contains several features that will allow you to customise the Digital side of your TV To do this With the TV in Digital mode press the G button to access the Digital INFO display on the TV screen then press the BLUE button to access the Set up Main Menu Next read below how to operate each option 05 Pickid Lake 09 05 09 25 American talk show Today s guests are sporting a variety of faice books Subtitles Audio FAVOURITE PROGRAMME This option allows you to store your favourite channels TV Broadcast in a list for quick access To do this 1 Once you have entered into the Main Menu press the or button to highlight Favourite Programme th
25. e Reduction 15 O On Off switch 7 On Screen Display Guide for Digital menus 21 On Screen Display Guide for General TV menus 14 Optional equipment connecting 32 using 33 Overview of remote control 6 of the TV set buttons 7 P Q Parental control 24 Personal mode picture 15 Picture Adjustment menu 15 PIN Code 27 PIP input 18 PIP position 18 Plug wiring 2 Programme Index table 11 Programme labels 19 naming 19 Sorting 19 Skipping 20 Pictures modes 15 R REC Timer 22 Recording programmes 22 31 Remote control overview 6 controlling other equipment 34 Ecological Paper Totally Chlorine Free cas Resetting picture settings 15 sound settings 16 RGB Centring 20 S Safety Information 4 Screen burn 4 Screen format 17 Selecting Analogue mode 11 Digital mode 11 Sharpness adjusting 15 Skipping a programme 20 Sleep timer 17 SmartLink VCR connecting 33 Smart mode 17 Software Download 27 Sound Adjustment menu 16 Sound modes 16 Subtitles 22 Supplied accessories 5 Switching on the TV 9 System Information 27 T Treble adjusting 16 Table of contents 3 Technical specifications 36 Teletext Analogue 28 Digital 29 Timed display 31 Timer cancelling 31 setting manually 31 Tuning automatically Analogue 19 automatically Digital 24 manually Analogue 20 manually Digital 26 Troubleshooting 37 TV buttons overview 7 TV menu systems 13 TV speakers 16 U V W X Y Z Using optional e
26. en press the OK button to display the Favourite Programme Set menu e e 2 Press the or button to scroll through the list until the channel you wish to store as a favourite is highlighted If you do not wish to select one of these channels as a favourite press the RED or GREEN button to display the previous or next 5 channels in the list GB s 3 When you have found and highlighted a programme you want to register as a favourite press the OK gt _ button A tick appears alongside that programme in the display e Press the OK button again to cancel your selection e Press the YELLOW button if you wish to delete clear all favorite settings 4 Repeat steps 2 and 3 to store other programmes as favourites Press the BLUE button to return to the Main Menu or press the MENU button to exit from the menu WALLPAPER This option allows you customise the background pattern of the Digital menus To do this 1 Once you have entered into the Main Menu press the or button to highlight Wallpaper then press the OK button to display the Wallpaper menu 2 Press the or button to select your choice of wall paper 4 different choices followed by the OK button to store 3 Press the BLUE button to return to the Main Menu or press the MENU button to exit from the menu continued The Digital Menus 23 24 lt lt PARENTAL CONTROL In order to use the Parental Control
27. es In that case proceed as follows Auto converge the Red Green and Blue Lines 1 Press on the mark on the right side of the projection TV 2 Press DI button A The Auto Convergence function works for about 10 seconds When the white cross disappears from the screen your projection TV is ready for use The Auto Convergence function does not work when e no signal is input e the input signal is weak e the screen is exposed to spotlights or direct sunlight e you watch the teletext broadcast 10 First Time Operation Selecting Digital or Analogue mode Press the DIGITAL C button on the remote control to switch between Digital and Analogue mode To check if you are watching a Digital or Analogue mode press the button If you are watching a digital programme a banner will appear momentarily at the top of the screen The Programme Index table The Programme Index table is only available in Analogue mode The Programme Index table is a quick and easy way to search for a channel TV Broadcast you wish to view 1 Press the OK button to display the Programme Index table on screen 2 Press the or button to scroll through the list until the channel you wish to view is highlighted 3 Press the OK button to display your chosen channel on the TV screen The Channel Index menu The Channel Index menu is only available in Digital mode The Channel Index menu provides yo
28. ew supplier for details To do this 1 Switch off the TV and unplug from the mains 2 Unscrew and remove the CAM slot cover 3 Insert the CAM into the slot on the rear of the Projection TV as shown Take care not to damage the CAM when inserting 4 Insert your viewing card into the CAM 5 After inserting the CAM and the viewing card replace the cover 6 Connect the TV to the mains and switch on 7 With the TV in Digital mode press the button on the remote control to display the Digital INFO display Press the BLUE button to display the Main Menu 8 Press the or button to highlight Detail Set up then press the OK button to display the Detail Set up menu 9 Press the or button to highlight CAM Set up then press the OK button to display the CAM set up menu For further information regarding the CAM and services available please contact your nearest Pay Per View supplier The Digital Menus 25 The Digital Detail Set up Menu O The Detail Set up menu allows you to further customise your TV To do this 26 Subtitles Audio Pickid Lake The Wright Stuff 09 05 09 25 09 05 09 25 American talk show Today s guests are sporting a variety of faice books With the TV in Digital mode press the G button Next press the BLUE button to access the Main Menu Then press or to select Detail Set up and press the OK button Next read
29. formation e g answer to a quiz Press 4 Press it again to conceal the information To select a sub page A teletext page may consist of several sub pages In this case the page number that appears on the upper left corner will change from white to green and one or more arrows will appear next to the page number Repeatedly press the or buttons on the remote control to watch the desired sub page To Switch Off Teletext Press DIGITAL C Fastext Fastext service lets you access Teletext pages with one button push When you are in Teletext mode and Fastext is broadcast a colour coded menu appears at the bottom of the teletext page Press the appropriate coloured button red green yellow or blue to access the page corresponding to your menu choice Digital Teletext uN The Digital Teletext is only available when watching Digital channels e If the TV is not already in Digital mode press the DIGITAL O button on the remote control e Many Digital broadcasters now provide a Digital Teletext service in the form of a dedicated Teletext channel This Digital service includes high quality text and graphics along with advanced navigation options e The appearance content and navigation methods of all Digital Text services are decided by the broadcaster For example Digital Text from the BBC may look different to Digital Text from ITV which may use different navigation methods e Most of the Digital Text services curre
30. ies and record programmes To do this With the TV in Digital mode press the button to access to the EPG Next read below how to operate each option LIST OF PROGRAMMES This screen consists of an information window a preview window a 2 hour timer bar divided into 30 minute intervals and a 5 channel programme list covering the 2 hour period You can select different programmes to get information To do this 1 With the EPG menu on screen by pressing press the or buttons to move the coloured cursor bar up or down the programme list and the or buttons to move left and right If you press the button once more after highlighting the last programme on the right the programmes scheduled for the next 2 hour period are displayed As each programme is highlighted a brief description of the programme appears in the event information box at the top left of the screen If you do not wish to select a programme from the 5 channels listed press the GREEN button to display the next 5 channels or RED button to display the previous 5 channels 2 Ifa programme you highlight is currently being broadcast press the OK button to obtain a preview in the preview window If you have previously set a viewing age limit in the Parental Control option see page 24 and the programme exceeds that age limit you will be asked to enter your PIN code before the preview is allowed 3 When the programme in the preview sc
31. indicated by a small symbol or text display on your TV screen superimposed on the channel you are watching d Press the or buttons to select the symbol then press the OK button to display the chosen information rox 2 Alternatively you may be requested to use the numbered and coloured buttons on your remote control to display the various pages of text information If when viewing Q the teletext pages you are requested to select OK or Cancel press the OK button for OK and the lt gt button for Cancel 3 Once the text information is displayed on screen use the amp or buttons the coloured buttons and or the numbered buttons to access the chosen information 4 When you have finished viewing Teletext press the DIGITAL button and then select an alternative Digital channel Digital Teletext 29 e The EPG menu is only available when watching Digital channels e Ifthe TV is not already in Digital mode press the DIGITAL O button on the remote control The EPG menu Electronic Programme Guide is an onscreen electronic programme guide that provides you with a quick and easy way to View a complete list of the programmes available with a preview of the programmes currently being broadcast reduce the size 30 DIGITALO EPG of the list by selecting a category of programme e g Sports or Mov
32. l you wish to name When the programme you want to name appears on the screen select the Label option and press Next press or to select a letter number or for a blank Press to confirm this character Select the other four characters in the same way After selecting all the characters press OK twice to store C Fine tune the broadcast reception Normally the automatic fine tuning AFT will give the best possible picture however you can manually fine tune the TV to obtain a better picture reception in case the picture is distorted To do this While watching the channel TV Broadcast you wish to fine tune and once you have entered into the Set Up menu as it is explained in the previous page and after selecting the option press Then select the AFT option and press Next press or to adjust the fine tuning between 15 and 15 Finally press OK twice to store d Skip any unwanted programme numbers when they are selected with the PROG buttons To do this Once you have entered into the Set Up menu as it is explained in the previous page and after selecting this option press Next with the Programme option highlighted press the PROG button to select the programme number you want to skip When the programme you want to skip appears on the screen select the Skip option and press Next press or to select Yes Finally press OK twice to confirm and store To cancel this function af
33. m is only available when watching Digital channels and gives you information on the programmes currently being show etc This menu also contains a submenu called Main Menu which allows you to customise the Digital side of your TV etc For more details please refer to the relevant sections of the chapter The Digital Menus pages 21 27 To operate any of the above menu systems use the following buttons 1 To switch on the e General TV Menus press the MENU button e Digital Menus press the G button TE 2 eTo navigate through the General TV Menus e To highlight the desired menu or option press or e To enter the selected menu or option press e To return to the last menu or option press e To alter the settings of your selected option press or e To confirm and store your selection press OK e To navigate through the Digital Menus e Coloured buttons red green yellow and blue are basically used to display some of the screens For details please refer to the relevant sections 3 To switch off the e General TV Menus press the MENU button e Digital Menus press the MENU button MENU Menu Systems 13 The General TV Menus for Digital and Analogue channels This menu system will help you to get the most from your TV helping you to change the picture settings sound settings etc On Screen Display Guide for the
34. me numbers enter the second digit within 2 5 seconds O a If Media Selector is switched to TV Press this button to watch the last channel selected the last channel watched for at least 5 seconds b If Media Selector is switched to VCR For Sony s VCR double digit programme numbers e g 23 press first and then the buttons 2 and 3 These buttons are used for Analogue Teletext see page 28 as well as for Digital Menus see relevant sections in this manual Selecting Analogue Teletext Press this button to switch on teletext Joystick a If Media Selector is switched to TV e When MENU is switched on use these buttons to operate the different menu systems See page 13 e When MENU is switched off press OK to display The Programme Index Table or The Channel Index Menu See page 11 RM 948 fal b If Media Selector is switched to VCR or DVD w EEES Using these buttons you can control the main functions of your VCR or DVD Displaying the TV Menu system Press this button to display the menu on the TV screen Press again to remove the menu display from the TV screen See page 13 Selecting channels Press these buttons to select the next or previous broadcast channel Selecting EPG In Digital mode press this button to display the EPG Electronic Programme Guide See page 30 Adjusting TV volume Press these buttons to adjust the volume of the TV Recording button If Medi
35. new programme number position for your selected channel TV Broadcast then press OK 3 Repeat steps 1 and 2 if you wish to change the order of the other channels PROGRAMME LABELS This option allows you to name a channel using up to five characters letters or numbers This option is only available in Analogue mode To do this 1 After selecting the option press then press or to select the programme number with the channel you wish to name 2 Press With the first element of the Label column highlighted press or to select a letter or number select for a blank then press to confirm this character Select the other four characters in the same way Finally press OK to store continued The General TV Menus 19 20 sro AV PRESET This option allows you to designate a name to the external equipment you have connected to the input sockets of this projection TV To do this 1 Once you have entered into the Set Up menu as it is explained in the previous page and after selecting the option press then press or to select the input source you wish to name AV1 and AV2 are for the rear Scarts and AV3 for side connectors Next press 2 A label automatically appears in the label column a If you want to use one of the 6 predefined label CAM GAME CABLE AV SAT VIDEO or DVD press or to select the desired label and finally press OK to store b If you want to
36. ntly available use simple navigation methods based on the following buttons e The button to load Digital Teletext e The and buttons to move around the screen e The OK button to select items on screen e The button to cancel a selection or exit Digital Teletext e The four coloured buttons to access shortcuts e The DIGITAL O button to exit Digital Teletext Dedicated Digital Teletext channels 1 With the TV in Digital mode press the numbered buttons on the remote control to m select a dedicated Teletext channel number To find out the channel number of a rine aw EEM dedicated Digital Teletext channel use the Channel Index menu Please refer to emae a apn SANG Press BLUE to change section eo The Channel Index menu section of this instruction manual on page 11 2 Once the Teletext channel is displayed follow the on screen instructions to access the required information On some pages the TV programme is also displayed Instructions on screen will tell you how to change the displayed programme 3 Ifwhen viewing the Teletext pages you are requested to select OK or Cancel press the OK button for OK and the button for Cancel 4 When you have finished viewing Teletext press the DIGITAL button to exit Selecting Teletext from other Digital channels Normal Teletext services may also be available on other Digital channels Sometimes this is
37. nus TV Speakers to Off Sound Adjustment Dual Sound Auto Volume TV Speakers Select AV Enter gt This option allows you to customise the sound mode After selecting this option press Next press or repeatedly to select Natural Enhances clarity detail and presence of sound by using BBE High Definition Sound system Dynamic BBE High Definition Sound system intensifies clarity and presence of sound for better intelligibility and musical realism Dolby V Dolby Virtual simulates the sound effect of Dolby Surround Pro Logic Off Flat response Press or to decrease higher frequency sounds Press or to decrease or to increase the lower frequency sounds Press or to emphasise the left or the right speaker Press OK to reset the sound to the factory preset levels e For a Stereo broadcast Press or to select Stereo or Mono e For a bilingual broadcast Press or to select Mono for mono channel if available A for channel 1 or B for channel 2 Press or to select On the volume level of the channels will stay the same independent of the broadcast signal e g in the case of advertisements or Off the volume level changes according to the broadcast signal Press or to select On to listen to the TV from the set speakers or Off to listen to the TV from an external amplifier connected to the audio outputs on the rear of
38. o 9 To do this Mangua aaa Auto Tuning Programme Sorting Programme Labels AV Preset Manual Programme Preset Detail Set Up Select AV Enter gt The Set Up menu allows you to alter various options on this TV To do this Once you have entered into this menu press or to select the desired option Next read below how to operate into each option LANGUAGE This option allows you to select the language that the menus are displayed in After selecting the option press and then proceed in the same way as in step 2 of the section Switching On the Projection TV and Automatically Tuning on page 9 AUTO TUNING This option allows you to automatically search for and store all available Analogue TV channels This option is only available in Analogue mode To do this After selecting the option press and then proceed in the same way as in the steps 3 and 4 of the section Switching On the Projection TV and Automatically Tuning on page 9 PROGRAMME SORTING This option allows you to change the order in which the Analogue channels TV Broadcast appear on the screen This option is only available in Analogue mode To do this After selecting the option press Next 1 Press the or button to select the programme number with the channel TV Broadcast you wish to rearrange then press the button 2 Press the or button to select the
39. o input RGB input TV audio video output eG gt 2 492 21 pin Scart connector CENELEC SMARTLINK standard including audio video input S video input selectable audio video output and SmartLink interface C audio outputs Left Right phono jacks elf RF In Analogue e RF In Digital e Jb RF Out Fa CAM Conditional Access Module slot e gt MODEM connection Side Terminals e 293 S Video input 4 pin DIN e 3 video input phono jack 3 audio input phono jacks eN headphones jack Sound Output 2 x 30 W music power 2 x 15 W RMS Power Consumption 220 W Standby Power Consumption 1W Dimensions wx h xd approx 1100 x 1160 x 536 mm Weight approx 68 Kg Accessories supplied e 1 Remote Control RM 948 e 2 Batteries IEC designated AA size e 1 RF Loopthrough cable Other features e Digital terrestrial reception e Digital Comb Filter High resolution e 100 Hz picture Digital Plus e Digital Teletext e Analogue Teletext Fastext TOPtext e NICAM e Sleep Timer e SmartLink e Dolby Virtual e BBE e PIP e Auto Format e CAM connection for future use only e MODEM connection for service use only Design and specifications are subject to change without notice This instruction manual has been printed on Ecological Paper Totally Chlorine Free 36 Additional Information Troubleshooting Here are some simple solutions to problems
40. on page 18 Select AV Enter gt A A i i TRARY RA YQ A Set Up a 2 o Language Auto Tuning Programme Sorting Auto Tuning Programme Sorting ore Refer to the section Language on page 19 Manual Programme Preset Detail Set Up Programme Labels r o Preset lt _ gt etail Set Up Select AV Enter Menu gt Select AVILES Set Up Language Programme Sorting hn arne Pese Refer to the section Auto Tuning on page 19 Detail Set Up Select AV Start Auto Tuning gt Set Up Aum Tah Re eee Refer to the section Programme Sorting on page 19 Detail Set Up Select AV Enter gt Set Up eee Programme Sortin Refer to the section Programme Labels on page 19 Detail Set Up Select AV Enter gt Set Up Aus Tuning Programme Sorting Ae Sy Refer to the section AV Preset on page 20 BARE TAA BARE BARS anual Programme Prese Detail Set Up TAA Select AVY Enter gt Language Auto Tuning Programme Sorting Programme Labels i oT Refer to the section Manual Programme Preset on page 20 BARE Select AV Enter gt T exe Language Auto Tuning RGBCenting gt 0 Programme Sorting erate Refer to the section Detail Set up on Mari
41. on the screen 1 Connect your equipment to the designated projection TV socket as it is indicated on the previous page 2 Switch on the connected equipment el 3 To watch the picture of the connected equipment press the button repeatedly until the correct input symbol appears on the screen gt A Symbol Input Signals 1 e Audio video input signal through the Scart connector E 1 e RGB input signal through the Scart connector 2 This symbol appears only if an RGB ma source has been connected 2 e Audio video input signal through the Scart connector ws 292 e S Video Input signal through the Scart connector This symbol appears only if a S Video source has been connected 93 e Video input signal through the phono socket H and Audio input signal through fj 293 e S Video Input signal through the front S Video input jack B and Audio signal through Ii This symbol appears only if an S Video source has been connected 4 Press DIGITAL O button on the remote control to return to the normal TV picture For mono equipment a m Connect the phono plug to the L G S I socket on the side of the TV and select 3 or 93 input signal _ using the instructions above Finally refer to the Sound Adjustment section of this manual and select Dual Sound A on the sound menu screen see page 16 Additional Information 33 Remote Control Configuration for VCR DVD In it s default condition this remo
42. ore further programmes for recording 0e Press the button to return to normal TV operation Co Set the timer recording function on your VCR to switch on and off to correspond with the programmes you have stored for recording e Once a programme has started recording do not switch channels or the recording will be cancelled e When a programme has been set to record and the TV is in standby mode the standby indicator on the front of the TV will flash green and red periodically to remind you that a programme has been set to record To cancel a previously set event 1 With the EPG menu on screen by pressing press the BLUE button to display the Timer List e 6 2 Press the or buttons to highlight the programme event you wish to cancel 3 Press the YELLOW button to cancel the programme event EPG 31 Connecting Optional Equipment e Using the following instructions you can connect a wide range of optional equipment to your projection TV e Conecting cables are not supplied CAM slot unscrew and remove the cover After inserting the CAM and the veiewing card screw the cover again SMARTLINK O R D D D
43. quipment 33 VCR connecting 32 33 Video input button 33 Video watching 33 Viewing area optimum 35 Volume adjusting 6 7 auto 16 Wall Paper 23 Wide mode 17 Widescreen watching 17 Zoom mode 17
44. re Aoa procedure begins All the available Digital channels will now be captured and TSMR a stored As this may take some time a message is included in the display to oan inform you of the tuning progress Press Blue key to cancel Auto Tuning Cancel b When Digital tuning is complete the analogue display appears automatically and the search and store procedure for the analogue channels begins e This procedure could take some minutes Please be patient and do not press any buttons otherwise automatic tuning will not be completed Tuning the Analogue Channels e If no Digital and no Analogue channels were found during the auto tuning process then a new menu appears automatically on the screen ales z S asking you to connect the aerial Please connect the aerial see page 8 and press OK The auto tuning process will start again Searching e Once all Digital and Analogue channels have been captured and stored the TV returns to normal operation and displays the Digital No channel found channel captured on channel number 1 Please connect aerial If no Digital channels are captured the Analogue channel that is Confirm stored on channel number 1 is displayed N Your projection TV is now ready for use First Time Operation 9 Adjusting Colour Registration Convergence Due to the earth s magnetism the picture might become undefined and you could see different colours on the outlines of the imag
45. re not to place heavy objects on the power lead as this could result in damage We recommend you wind any excess lead around the holders provided on the rear of the TV Do not cover the ventilation openings of the TV with items such as curtains or newspapers etc e To obtain a clear picture do not expose the screen to direct illumination or direct sunlight If possible use spot lighting directed down from the ceiling e Displaying a still picture for long periods of time for instance when operating a video game or personal computer and viewing a programme in 16 9 mode may damage the picture tube To avoid this keep the picture contrast level low e Avoid touching the screen and take care not to scratch the surface with hard objects e Screen Burn Image Retention An image ghosting or screen burn may appear on the screen if the television is left operating with either a still image or a programme displaying a bright corner channel logo for an extended period of time The risk of this is higher if the set is in Live mode or has a high contrast setting This image cannot be removed once burnt onto the screen To avoid the risk of occurrence do not leave the television operating on such a picture or programme for long periods of time Repeated extended daily usage of the same image or programme can also result in this occurrence which is not covered by the Sony warranty 4 Safety Information Checking the Acces
46. reen is the one you wish to watch press the button to exit the EPG menu and view the programme at full size THE CATEGORY POP UP LIST The Category pop up list allows you to quickly search for a programme by choosing from different categories of programmes For example select the News option from the Category pop up list to display programme information only for News channels To do this 1 With the EPG menu on screen by pressing press the YELLOW button to display the Category pop up list 2 Press the or buttons to highlight the category you want then press the OK button The EPG programme list will now only contain programmes of the type selected For information on the types of Categories along with instructions on how to add and remove programmes from the Favourite list please refer to The Channel Index menu section of this instruction manual on page 11 continued RECORDING PROGRAMMES To select a programme for recording or timed display 1 With the EPG menu on screen by pressing Q press the or buttons to highlight a programme in the EPG menu that you wish to record then press the OK button The Timer screen appears 2 Press the RED button and your VCR will automatically record the selected programme when it starts only if your VCR has SmartLink facility or press the GREEN button if you wish the programme to appear on your TV screen when transmission begins e If
47. rmation on SmartLink please refer to the Instruction Manual of your VCR e Ensure that your SmartLink VCR is connected to the socket using a fully wired 21 pins Scart lead Hi Fi speakers To enjoy Dolby Virtual sound effect through your Hi Fi equipment Place the speakers of your equipment in front of your listening position and beside the projection Ooo TV set but keeping a distance of 50 cm between each speaker and the projection TV set Then by using the menu system select the menu Sound Adjustment and select Dolby V on the Effect option see page 16 E F Connecting to external Audio Equipment sa Plug in your Hi Fi equipment to the audio output sockets Aq if you wish to amplify the audio output from projection TV and using the menu system select the Sound Adjustment menu and set the TV Speakers to Off see page 16 a remote control Also treble and bass settings can be modified through the Sound Your sitting position Adjustment menu Audio level of the external speakers can be modified by pressing the volume buttons on the Using Optional Equipment In order to get the input signal of a connected equipment onto the TV screen you need to select the symbol of the connector to which you have connected the device e g Your VCR is connected to the connector with the symbol G gt 1 1 Press the button on the remote control repeatedly until you see the symbol 1
48. s Informs you of the result of the instructions Table of Contents Notcetor Customers inthe Latte Kingdom sionnsair anao a E a e EE 2 o UO eean S E a 3 SE OI E E E E A E E A EE E A E N E 4 Overview Checking thie Accessories Supplied susiana erini E E A E E A E eer TAE EEA 5 GV le Or e te Oni Olt oao AA A E A A E A A N 6 eren oe Poona ADON A E EA E E EE E E O EAE OE 7 Installation Connecung he Arrol and VCR eemenmemerenne eum reenter E E eee Inserting Batteries into the Remote Control First Time Operation Switching on the Projection TV and Automatically Tuning oe eeseseeeeeescseeeeeesesceeceesesssesseacseseeecscseseeecaesesecessssseesaeaseeeeeesseseeaeees 9 Adjusting Colour Registration Conver cence iriiri no ai i E a A AE a EERE AAEE AiE 10 Basic Operation PelecinA De alor Anao ue Od E pora EE EEE EEN as PEER EE ee 11 The io ane a eu hela a E E en ere re eee ee err 11 Bete et Vale lei bl Bele aea a E Menten A A mT mene E E stern ete ee Mer E ie mr Tonnes terete a earner ere mere E tee 11 Menu systems Introducing and Using the different Menu Systems s ssersesesreseeseresesersreresensossscestsreresensesssrtsrreonsnersrsseresreressssesrseeneneestesstesesseneesesteees 13 THe GENSAT MEDUS sessicusttenccrcaeiisrcdooadnarsssneicuanceiaied aurneninucnantronsryentiantnineninT nanohole eboney eames Rete emsmN Sus 14 On Screen Display Guide tor the General TV Menus sececsscsissasc singe sorcrstatsis desastvionsnetncnagancecnnnaaeen n
49. set a different label select Edit and press Then with the first element highlighted press or to select a letter number or for a blank then press to confirm this character Select the other four characters in the same way and finally press OK to store MANUAL PROGRAMME PRESET This option is only available in Analogue mode This option allows you to a Preset channels or the VCR channel one by one to the programme order of your choice To do this 1 Once you have entered into the Set Up menu as it is explained in the previous page and after selecting the option press Next with Programme option highlighted press Press or to select which programme number you want to preset the channel on for VCR select programme number 0 Then press 2 After selecting the Channel option press Then press the number buttons to enter directly the channel number of the TV Broadcast or the channel of the VCR signal If you do not know the channel number press or to search for it When you have tuned the desired channel press OK twice to store Repeat all the above steps to tune and store more channels b Label a channel using up to five characters To do this Once you have entered into the Set Up menu as it is explained in the previous page and after selecting the option press Next with the Programme option highlighted press the PROG button to select the programme number with the channe
50. slands AD Fremont Point 51 44 41 47 South dD Hannington 39 45 42 66 G3 Midhurst 61 55 58 68 Rowridge 31 24 27 21 West Q Mendip 58 64 61 54 37 East 6 Sandy Heath 31 27 24 21 39 aD Sudbury 51 44 41 47 Tacolneston 62 55 59 65 52 Midlands West Ridge Hill 22 28 25 32 Sutton Coldfield 46 40 43 50 D The Wrekin 26 33 23 29 Midlands East 2 Waltham 58 64 61 54 Northern Ireland 3 Brougher Mountain 22 28 25 a2 Divis 31 27 24 21 5 Limavady 55 62 59 65 North Belmont 22 28 25 32 56 7 Emley Moor 44 51 47 41 37 North West Winter Hill 55 62 59 65 48 North East Bilsdale West Moor 33 26 29 23 Caldbeck 30 34 28 32 56 GD Chatton 39 45 49 42 GD Pontop Pike 58 64 61 54 Scotland G Angus 57 63 60 53 Black Hill 40 46 43 50 37 G Sandale 22 67 Caldbeck z 28 32 56 GD Craigkelly 31 27 24 21 48 Darvel 33 26 23 29 Durris 22 28 25 32 67 Eitshal Lewis 33 26 23 29 Keelylang Hill 40 46 43 50 Knock More 33 26 23 29 Rosemarkie 39 45 49 42 Rumster Forest 31 a7 24 21 Selkirk 55 62 59 65 52 Wales Blaenplwyf 31 27 24 21 56 Carmel 57 63 60 53 Llanddona 57 63 60 53 Moel y Parc 52 45 49 42 Presely 46 40 43 50 37 GD Wenvoe 44 51 41 47 38 Additional Information Index A Accessories supplied 5 Aerial connecting 8 AFT 20 Analogue mode selecting 11 Audio Adjustment menu 16 Audio for Digital channels 22 Auto Format 17 Auto tuning Analogue 19 Auto tuning Digital 24 A
51. sories supplied VIDEO TV 7h 170 o e se REJ ete ety D VCR TV DVD 2 Batteries AA size RM 948 fal Dne o 1 RF Loopthrough 1 Remote control RM 948 Overview 5 Overview of Remote Control Buttons To Temporarily Switch Off TV Standby mode Press this button to temporarily switch off TV the standby indicator on the TV lights up Press again to switch on TV from standby mode To save energy we recommend switching off completely when TV is not in use After 15 minutes without a signal and without any button being pressed the TV switches automatically into standby mode VCR or DVD on off Press this button to switch your VCR or DVD on or off VIDEO TV _ 7h 17 Media Selector With this remote control you can operate not only this TV but also the main functions of your VCR or DVD Switch on the device you want to operate and next press this button repeatedly to select the VCR TV or DVD A green light will be momentarily lit to show which one you have selected Before the first time you want to control a DVD or VCR by using this remote control you have to set it up depending on the brand of the device to be used See page 34 Selecting input source Press this button repeatedly until the desired input symbol of the source appears on the TV screen Selecting channels If Media Selector is switched to TV or VCR press this button to select channels For double digit program
52. ss this button to adjust the colour registration For more details please refer to the chapter Adjusting Colour Registration Convergence on page 10 S video Input jack Video Input or Audio Input jacks Auto Start Up Button Press and hold this button Headphones jack for approximately 2 seconds to start the auto start up sequence For more details please refer to the chapter Switching On the Projection TV and Automatically Tuning on page 9 Overview 7 Connecting the Aerial and VCR One RF Loopthrough cable is supplied The rest of connecting cables are not supplied stad T OMS L G S o r 6V 200mA O R D D D 1 01 The Scart lead is optional If you use this optional connection it can improve picture and sound quality when using a VCR IN e If you do not use a Scart lead after automatically tuning the projection TV refer to the section Manual Programme Preset on page 20 to tune in the projection TV to the output of your VCR Also refer to your VCR instruction manual to find out how to find the output channel of your VCR e For more details of VCR connections as well as other connections please refer to the section Additional information when connecting equipment on page 33 Inserting Batteries into the Remote Control Make sure you insert the supplied batteries using the correct polarities Always remember to dispose of used batteries in
53. st Analogue TV stations The index page of the teletext service usually page 100 gives you information on how to use the service To operate teletext use the remote control buttons as indicated below e Teletext errors may occur if you use a channel TV Broadcast with a weak signal e After 5 minutes viewing the same teletext page and without any button being pressed the brightness level of the picture automatically decreases noticably to avoid any damage to the picture tube Press any button of the remote control to reset the brightness level Q 000 JOON SOOM o G ES 28 Analogue Teletext To switch on Teletext After selecting the Analogue TV channel which carries the teletext TELETEXT service you wish to view press eee News 153 Sport 101 Weather 98 To select a Teletext page Input 3 digits for the page number using the numbered buttons e If you make a mistake retype the correct page number e If the counter on the screen continues searching it is because the page is not available If this is the case input another page number To access the next or preceding page Press PROG E3 or PROG y To superimpose teletext on to the TV Whilst you are viewing teletext press E Press it again to cancel teletext mode To freeze a teletext page Press Press it again to cancel the freeze To reveal concealed in
54. tal Programme Preset lt a___ gt p age 20 Detail SetUp p Select AV Enter Menu gt TARE Select AV Enter gt 14 The General TV Menus fs The Picture Adjustment Menu MENU D The Picture Adjustment menu allows you to alter the A picture adjustments Fa A To do this Picture Mode M Once you have entered into this menu press or to select yf m Ly o the desired option then press Next press or eS ee o i gt BF staves repeatedly to adjust it and finally press OK to store the new Eq noce nection V 4 Noise Reduction MENEE adjustment Select AV Enter Menu gt Select AV Enter gt Picture Mode This option allows you to customise the picture mode based on the programme you are watching After selecting this option press Next press or repeatedly to select Live for live broadcast programmes DVD and Digital Set Top Box receivers ore Personal for individual settings Movie for films Contrast Press or to reduce or enhance picture contrast Brightness Press or to darken or brighten the picture Brightness can only be altered if Picture Mode is set to Personal Colour Press or to decrease or to increase color intensity Colour can only be altered if Picture Mode is set to Personal
55. te control will operate the basic functions of this Sony TV Sony DVDs and most Sony VCRs To control VCRs and DVDs of other manufacturers and some Sony VCR models please complete the following steps e Before you start look up the 3 digit code for your brand of DVD or VCR from the list below On those brands that have more than one code enter the first code number e Sony will endeavour to update the software according to market changes Therefore please refer to code table included with the remote control for latest code set To do this 1 Press the Media Selector button on the remote control repeatedly until the required green light VCR or DVD is lit GQ G If Media Selector is on TV position code numbers will not be stored Oo 7 8 9 2 Before the green light goes out press and hold the YELLOW button for approximately 6 seconds until the 0 green light starts flashing 3 Whilst the green light is flashing enter all three digits of the code for your brand of VCR or DVD using the number buttons on the remote control If your selected code is entered correctly all three green lights will be lit momentarily 4 Turn on your VCR or DVD and check that the main functions work e If your device is not working or some of the functions do not work please check that you entered the correct code set or try the next code listed against the brand e Your brand codes may be lost if weak batteries are not replaced within a few
56. teletext page and without any button being pressed the projection TV automatically decreases the brightness level to avoid any damage to the picture tube To reset the brightness level press any button of the remote control e Check that the Media Selector on the remote control is set to the device you are using VCR TV or DVD e If the remote control does not operate the VCR or DVD even when the Media Selector has been set correctly Enter the necessary code set as explained in the Remote Control Configuration for VCR DVD section on page 34 e Replace the batteries e Contact your nearest Sony service centre If you continue to experience problems have your projection TV serviced by qualified personnel or you can contact the Sony UK Digital Helpline on 0870 600 1717 Additional Information 37 Television Channel Number Guide for Analogue channels Only the main transmitters are listed Information regarding the regional sub relay channel numbers can be obtained by contacting The BBC Engineering Information Dept Telephone Number 020 7852 5040 MAIN TRANSMITTERS BBC1 BBC2 ITV CH4 CH5 London amp South East CD Bluebell Hill 40 46 43 65 Crystal Palace 26 do 23 30 Dover 50 56 66 53 CD Heathfield 49 52 64 67 Oxford 57 63 60 53 49 South West 6 Beacon Hill 57 63 60 53 C7 Caradon Hill 22 28 25 32 Huntshaw Cross 55 62 59 65 67 Redruth 51 44 41 47 37 Stockland Hill 33 26 23 29 Channel I
57. terwards select No instead of Yes in the step above DETAIL SET UP Once you have entered into the Set Up menu as it is explained in the previous page and after selecting this option press to acess to the RGB Centring option which allows you to readjust the horizontal position of the picture in case you need to do it when connecting an RGB source To do this While watching an RGB source select the RGB Centring option and press Then press or to adjust the centre of the picture between 10 and 10 Finally press OK to confirm and store The General TV Menus The Digital Menus This menu system gives you information on the programmes currently being shown as well as the those programmes which are on next It also allows you to customise the Digital side of you TV e The Digital Menus are only available when watching Digital Channels e Ifthe TV is not already in Digital mode press the DIGITAL O button on the remote control On Screen Display Guide for the Digital Menus Channel 5 05 The Wright Stuff Pickid Lake 7 09 05 09 25 09 05 09 25 American talk show Today s guests are sporting a variety of faice books Main Menu A Favorite Programme wallpaper Refer to the section Parental Control Auto Tuning Favourite Programme Detail Set up CAM Set up on page 23 y Subtitles Refer to the section Subtitules
58. tes for the software that controls your TV This option allows you to automatically receive updates free through your existing aerial To do this GB 1 Once you have entered into the Detail Set up menu as it is explained in the previous page press the or button to highlight Software Download then press the OK button to display the Software Download menu 2 Press the or button to change the Current Setting If you wish to receive downloads the Current Setting should be set to ON If you do not wish to receive downloads the Current Setting should be set to OFF Press the OK button to confirm your selection 4 Press the BLUE button to return to the Digital Set up menu or press the MENU button to exit from this menu SYSTEM INFORMATION This is an information screen only It tells you the current version of the software in your TV together with the signal strength as indicated by the coloured bar in the display To do this 1 Once you have entered into the Detail Set up menu as it is explained in the previous page press the or button to highlight System Information then press the OK button to display the System Information menu 2 Press the BLUE button to return to the Digital Set up menu or press the MENU button to exit from this menu The Digital Menus 27 Analogue Teletext Teletext is an information service transmitted by mo
59. the projection TV e If you are listening to the TV through headphones the Effect option will automatically be switched e If you select Dolby Virtual on the Effect option the Auto Volume option will automatically be switched to Off and vice versa The BBE High Definition Sound system is manufactured by Sony Corporation under license from BBE Sound Inc It is covered by U S Patent No 4 638 258 and No 4 482 866 The word BBE and BBE Symbol are trademarks of BBE Sound Inc This TV has been designed to create the Dolby Surround sound effect by simulating the sound of four speakers with two speakers when the broadcast audio signal is Dolby Surround encoded The sound effect can also be improved by connecting a suitable external amplifier for details refer to Connecting to external audio Equipment on page 33 Manufactured under license from Dolby Laboratories Dolby Pro Logic and the double D symbol J are trademarks of Dolby Laboratories RZ The Features Menu MENU RLE Picture Adjustment Picture Mode Contrast _ Brightness m m Colour ne E Sharpness Reset Noise Reduction AUTO Select AV Enter Menu gt RA KZ Q Features Sleep Timer Auto Format AV2 Output PIP Input PIP Position Select AV Enter Menu gt enpa 26 gt
60. u with a quick and easy way to a View a complete list of the programmes available for selection with a preview of the programmes contained in the list b Search for a programme quickly by selecting from different categories of programmes c Store programmes into a list of favourites a List of programmes o 1 Press the OK button on the remote control to display the Channel Index menu on the TV screen The menu contains a list of all the available channels TV Broadcast 7m The name of the programme currently being shown along with its start and finish Si umes times is shown for each of the available channels The current channel is previewed cms ceee in the top right corner of the screen with its channel name and number displayed Ce en is below it Previous 2 Press the or buttons to move the coloured cursor up or down the list to select the desired programme If you do not want to select a programme from the 6 channels listed press the GREEN button to display the next 6 programmes or the RED button to display the preceding 6 channels 3 Press the OK button to display the highlighted programme in the preview window 4 Press the OK button to exit the Channel Index menu The programme that was being previewed will be displayed If an age limit for viewing has been set and the programme selected exceeds that age limit you will need to enter your PIN code before the pre
61. uto volume 16 AV2 Output 18 AV Preset 19 Balance adjusting 16 Bass adjusting 16 Batteries inserting into the remote control 8 BBE 16 Brightness adjusting 15 Buttons overview of the remote control 6 overview of the TV buttons 7 C CAM Set up 25 Camcorder connecting 32 Category pop up list 12 30 Channel Index menu 11 Channels changing 6 Colour adjusting 15 Colour registration adjusting 10 Configuring the remote control 34 Connecting an aerial 8 a Camcorder 32 a DVD 32 a Hi Fi 32 a SmartLink VCR 32 33 a VCR 32 headphones 32 Contrast adjusting 15 Convergence adjusting 10 D Dedicated Digital Teletext channels 29 Digital INFO display 22 Digital menus 21 Digital mode selecting 11 Digital Teletext 29 Dolby Virtual 16 33 Dual sound 16 DVD connecting 32 E F EPG 30 Fastext 28 Favourite programme 12 23 Fine tuning for analogue channels 20 Fuse replacing 2 http www sony net Sony Espa a S A Printed in Spain G H J K Guide On Screen Display Guide for Digital menus 21 Guide On Screen Display Guide for General TV menus 14 Headphones connecting 32 Hi Fi connecting 32 Image retention 4 L M N Labelling Analogue channels 20 Language of the menus selecting 19 Live mode 15 Manual timer 31 Manual tuning analogue 20 Digital 26 Media Selector button 6 Menu systems 13 Movie mode 15 Naming a programme 19 Noise Reduction 15 Mode 4 3 17 Mode 14 9 17 Nois
62. view is displayed Refer to PIN Code section on page 27 Programmes that exceed the age limit you have set will be identified by a symbol continued Basic Operation 11 b The Category pop up list The Category pop up list allows you to quickly search for a programme by choosing from different categories of programmes 1 With the Channel Index menu on screen press the YELLOW button to display the Category pop up list The following categories are available m ES OS Sakia ae 09 05 09 25 Favourite key to exit Index Favourite Contains all the programmes you have stored as a favourite see re wsus NENS below Previous v Choice The TV will create this list based on the type of programmes you watch the most Recent Prog Contains the last 5 programmes watched All Categories Contains all available channels Sports Contains all sport channels News Contains all news channels Film Contains all film channels Entertainment Contains all entertainment channels Lifestyle Contains all lifestyle channels Education Contains all education channels Kids Contains all kids channels 2 Press the or buttons to highlight the required category The category you choose will be displayed in a title bar at the top of the programme list along with the date and time 3 Press the OK button The Channel Index menu will now contain only programmes of the t
63. which may affect the picture and sound Problem No picture screen is dark and no sound Poor or no picture screen is dark but good sound No Digital channels after tuning No picture or no menu information from equipment connected to the Scart connector Good picture no sound No colour on colour programmes When you switch on the TV the last channel you were watching before switching the TV off does not appear Undefined picture with different colour on the outlines of the images Noisy picture when viewing a TV channel Distorted picture when changing programmes or selecting teletext Brightness level of the picture is notoriously decreased when viewing a teletext page Remote control does not function The standby indicator on the projection TV flashes even though the EPG is not programmed to record e Never open the casing yourself Solution e Check the aerial connection e Plug the TV in and press the button on the front of the projection TV e If the standby indicator is on press TV I O button on the remote control e Using the menu system select the Picture Adjustment menu and select Reset to return to the factory settings see page 15 e Maybe there are no Digital transmissions in your area contact a local installer to find out when digital transmissions begin in your area e Contact a local installer to find out at which transmitter you should be pointing your
64. ype selected 4 Press the OK button to exit the Channel Index Menu c Favourite programmes This option allows you to create a list of your favourite programmes To add a programme to the Favourite list 1 With the Channel Index menu on screen press the or buttons to highlight the programme you want as a favourite 2 Press the BLUE button to store the programme in the favourite list To remove a programme from the Favourite list 1 With the Channel Index menu on screen press the YELLOW button to display the Category pop up list 2 Highlight the Favourite category Press the OK button to display the Favourite list 3 Press or to highlight the programme you wish to remove from the Favourite list 4 Press the BLUE button to remove the programme 5 Press the OK button to exit the Channel Index Menu 12 Basic Operation Introducing and Using the different Menu systems Your projection TV uses an On Screen Display menu system to guide you through the operations This projection TV has 2 different Menu Systems as follows a General TV Menus This menu system is available when watching both Digital and Analogue channels The displays of this menu system will help you to alter the picture settings sound settings etc For more details please refer to the relevant sections of the chapter The General TV Menus pages 14 20 b Digital Menus This menu syste

Sony KP-44DX2 Projection Television User Manual

Contents

Download Pdf Manuals

Related Search

Related Contents