Home

Sony KLV S23A10 Flat Panel Television User Manual

1. Oooo oo If your TV does not turn on and red light keeps flashing your TV may need service Call your local Sony Service Center Check Power Saving settings page 61 Make sure the power cord is connected securely Turn on the power of the TV Check antenna cable connections Set Cable to Off in the Channel settings page 53 Perform Auto Program to add receivable channels that are not presently in the TV s memory page 53 Check your Channel Fix setting page 53 Perform Auto Program to add receivable channels that are not presently in the TV s memory page 53 Perform Auto Program to add receivable channels that are not presently in the TV s memory page 53 Make sure Cable in the Channel settings is set to On page 53 Perform Auto Program to add receivable channels that are not presently in the TV s memory page 53 Check if the Sleep timer is activated page 58 Check the connection between the optional video equipment and the TV Press TV VIDEO on the remote control page 33 If you connect video equipment to the S VIDEO input of the TV set Auto YC to On in the Setup settings page 61 Press WEGA GATE on the remote control Select your desired input from the External Inputs list Check antenna cable connections Check the antenna location and direction Other Information Problem Possible Remedies Only snow and noise appear on the screen Dotted li
2. Using the Settings 2 Using the Setup Settings To select the Setup settings 1 Press 2 Select 3 Highlight WEGA GATE Settings Setup WEGA GATE To exit the Setup settings press Setup 22 Caption Vision Info Banner 4 Press X Label video Input Language to select Auto Power Saving ie Light Sensor ass th WM Select Set Back e Exit Selecting Setup The Setup settings includes the following options Options To highlight an option and to change settings press Press to confirm the selection Option Caption Vision Info Banner 60 Description Allows you to select from several closed caption modes for programs that are broadcast with closed caption Off Caption Vision is turned off CC1 CC2 Displays a printed version of the dialog or sound 4 effects of a program Should be set to CC1 for most programs Text1 Text2 Displays network station information presented Text3 Text4 using either half or the whole screen if available Set to On or Off When on displays the program name if the broadcaster offers this service Displays for up to four seconds when the channel is changed or the DISPLAY button is pressed Using the Settings Option Description X If you have assigned Video Labels you can access the External Inputs list on
3. While the Sleep timer is activated the TIMER LED on the TV lights up in red To cancel the Sleep timer Press SLEEP repeatedly until Sleep Off appears or turn the TV power to off then turn on the TV again Introducing WEGA GATE Overview of WEGA GATE WEGA GATE provides one button access for controlling your TV It enables you to perform a variety of tasks intuitively with an on screen menu rather than a complicated remote control When you press the WEGA GATE button you can perform basic TV operation your favorite channels watching TV images from external equipment or setting menus 1 Press WEGA GATE on the remote WEGA GATE control panel appears WEGA GATE Q Favorites WEGA GATE Select H Exit WEGA GATE Press WEGA GATE to exit 42 Introducing WEGA GATE The WEGA GATE screen gives you access to the following items Icon Description The Favorites feature lets you select programs from a list of up to 8 favorites channels that you specify For details see page 44 S Favorites The TV List feature lets you select TV programs from a list of channel labels You can assign a label to the channel For details see page 45 d TV List The External Inputs feature lets you select equipment that is connected to your TV such as a DVD player You can assign a label to your equipment or skip unused inputs conveniently For details see page 45 External Inputs The Sett
4. Q N Select 9 5 0 Back Exit WEGA The Channel settings includes the following options To highlight an option and to change settings press 4 Press to confirm the selection EET Option Description S Favorite Lets you set up a list of up to 8 of your favorite channels E Channels 1 Press to select Program 2 Press 4 9 to highlight a Favorite Channel numbers 1 8 i which you want to make your Favorite Channel then press o to select it gt 3 Press 4 9 to scroll through the channels until you find the 2 channel you want as your favorite then press to select it 4 select other Favorite Channel numbers repeat steps 2 3 D Press to return to the Channel settings or press WEGA GATE to exit Settings Cable On Select if you are receiving cable channels with a cable Off Select if you are using an antenna You should run Auto Program after changing the cable setting Channel Fix Off Turns off Channel Fix Useful when you 9 6 Select one of these channels if something is have a cable box or a satellite receiver connected Auto Program connected to the VHF UHF jack Video 1 4 Use this setting if you have connected the equipment to the A V input jacks Automatically sets up the channel list on the TV for all receivable channels Continued 53 Using the Settings X Channels that you set to be hidden can be accessed o
5. 29 Setting Up the Channel List 30 Using Initial 30 Button Descriptions eese 32 Programming the Remote Control 34 Using Other Equipment with Your Remote Control icr in ena enean cres 36 Special Buttons on the Remote Control 38 Using the Wide Screen Mode 38 Using the Jump Function 39 Using the Freeze Function 39 Using the Power Saving Function 39 Using the Sleep Function 40 Introducing WEGA GATE Overview of WEGA 42 Navigating and Select 44 Using Favorites in WEGA GATE 44 Using TV List in GATE 45 Using External Inputs in GATE 45 Using Settings WEGA GATE 45 Using the Settings Overview of the Settings 46 Using the Video 48 Selecting Video 48 Using the Audio Settings 49 Selecting Audio Options 49 Using the Screen Settings
6. 51 Selecting Screen 51 Using the Channel Settings 53 Selecting Channel Options 53 Using the Parent Settings 55 Selecting Parent Options 55 US Models Selecting Custom Rating Options aic tee aie 56 Viewing Blocked Programs 56 Canadian Models Selecting Custom Rating Options SURG eite bd ers 57 Viewing Blocked Programs 57 Using the Clock Timers Settings 58 Selecting Clock Timers Options 58 Using the Setup Settings 60 Selecting Setup Options 60 Troubleshooting eere 62 Trouble Symptoms and Remedies 62 Contacting Sony esee 64 65 i2 er 66 Introducing the TV Welcome Thank you for purchasing this Sony HDTV Ready LCD TV This manual is for models KLV S19A10 and KLV S23A10 Package Contents Along with your new TV the packaging box contains a remote control size AA batteries 75 ohm coaxial cable ferrite core attached AC power cord AC power adaptor KLV S19A10 only HDI5 HD15 cable Support belt securing screw wood screw Operating Instr
7. Be sure to attach the brackets supplied with the wall mount bracket Protruding location Do not install the TV in protruding locations If you install the unit in the following locations injury may result O Donotinstall the unit in a location where the unit protrudes such as pillars O Do not install the unit in a location that may cause injury Oils Do not install this unit in restaurants where oily vapors occur Dust absorbing oil may enter into the unit and damage the unit Corrosion Use of this TV near the seashore may subject the set to excessive salt corrosion and internal damage and result in deterioration of the TV s performance If the set will be subjected to these conditions steps should be taken to reduce the humidity and temperature of the area where the TV is located Ventilation The slots and openings in the TV are provided for necessary ventilation To ensure reliable operation of the unit and to protect it from overheating these slots and openings must never be blocked or covered Unless proper ventilation is provided the unit may gather dust and get dirty For proper ventilation observe the following Do not install the unit turned backward sideways Do not install the unit turned over or upside down ABBE o Never cover the slots and openings with a cloth or other materials o Never block the slots and openings by placing the unit on a bed sofa rug
8. CHANNEL CHANNEL In the WEGA GATE screen these buttons serve as up down buttons 6 POWER Press to turn on and off the TV 7 IR Infrared Receives IR signals from the remote control Receiver Light Senses room light level and adjusts the screen brightness accordingly see page 61 for details Sensor Do not put anything near the sensor as its function may be affected 8 PIC OFFLED When lit indicates that the Picture Off feature is activated For details see page 61 9 TIMER LED When lit indicates one of the timers is set When the timer is set this LED will remain lit even if the TV is turned off For details see page 58 POWER LED Lights up in green when the TV is turned on If the LED blinks in red continuously this may indicate the display unit needs servicing see Contacting Sony on page 2 11 Speaker Outputs audio signal The CHANNEL button has a tactile dot Use it as a reference when operating the TV 13 Introducing the TV Side Panel 20000 Left side Right side Description 1 2 E 2 14 VIDEO 2 IN S VIDEO VIDEO 2 IN VIDEO AUDIO L AUDIO R Headphones jack PC IN RGB IN 6 HDMI IN 5 HDMI L AUDIO R Connects to the S VIDEO output jack on your camcorder or other video equipment that has S VIDEO Provides better picture quality than composite video 2 Connect to the composit
9. N Y 2 589 826 11 1 amp LCD Color TV Operating Instructions KLV S19A10 KLV S23A10 2005 Sony Corporation Owner s Record The model and serial numbers are located at the rear of the TV Record these numbers in the spaces provided below Refer to them whenever you call upon your Sony dealer regarding this product Model No Serial No Contacting Sony If after reading these operating instructions you have additional questions related to the use of your Sony TV please call our Customer Information Services Center at 1 800 222 SONY 7669 US residents only or 1 877 899 SONY 7669 Canadian residents only WARNING To reduce the risk of fire or shock hazard do not expose the TV to rain or moisture UTION ELECTRIC SHOCK DO NOT OPEN ATTENTION RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR PRECAUCION RIESGO DE CHOQUE ELECTRICO NO ABRIR AN AN CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER OR BACK NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL This symbol is intended to alert the user to the presence of uninsulated dangerous voltage within the product s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons This symbol is intended to alert the user to the presence of important operating and maintenance servicing instructions in the literature a
10. To Do This Do This Watch the satellite receiver Press WEGA GATE to select the Satellite input Video 1 2 or 3 in the External Inputs list or Press TV VIDEO repeatedly to select the satellite receiver input Video 1 2 or 3 Set up the remote control to operate the satellite You must program the remote control See Programming the receiver Remote Control on page 34 Activate the remote control to operate the Press SAT CABLE FUNCTION satellite receiver Control satellite receiver functions with the See Operating a Satellite Receiver on page 36 remote control Label video inputs to easily identify equipment See the instructions for setting up Label Video Inputs on page 61 connected to the TV 19 Connecting the TV HD Equipment Disconnect all power sources before making any connections X If your equipment has an HDMI or DVI connector see page 26 20 1 Using a component video cable connect your equipment s output jacks to the TV s input jacks Use HD DVD IN 4 connections y Component video YPsPr connection is necessary to view 480p 720p and 1080i formats Note that this TV displays all format types of picture in a resolution of 1 280 dots x 768 lines KLV S19A10 and 1 366 dots x 768 lines KLV S23A10 2 Using an audio cable connect your equipment s AUDIO output jacks to the TV s AUDIO input jacks y The YPsPn jacks do not provide audio so audio cable
11. KLV S19A10 SU LWI KLV S23A10 To Customers Sufficient expertise is required for installing the specified product Be sure to subcontract the installation to Sony dealers or contractors and pay adequate attention to safety during the installation Continued 3 For Customers in the United States This product contains mercury Disposal of this product may be regulated if sold in the United States For disposal or recycling information please contact your local authorities or the Electronics Industries Alliance http www eiae org To Sony Dealers For installation of SONY WALL MOUNT BRACKET be sure to read and follow the instructions supplied with those optional products Trademark Information TruSurround SRS and the symbol are trademarks of SRS Labs Inc TruSurround technology is incorporated under license from SRS Labs Inc Licensed by BBE Sound Inc under USP4638258 4482866 BBE and BBE symbol are trademarks of BBE Sound Inc Macintosh is a trademark licensed to Apple Computer Inc registered in the U S A and other countries Wega Steady Sound VAIO PlayStation and CineMotion are registered trademarks of Sony Corporation KLV S23A 10 only As an ENERGY STAR Partner Sony Corporation has determined that this product meets the ENERGY STAR guidelines for energy efficiency ENERGY STAR is a U S registered mark This TV incorporates High Definition mil Multimedia Interface HDMI te
12. When you press the button twice only the frozen screen is displayed when you press it a third time the normal screen returns FREEZE Current program Move the sub screen with To cancel the Freeze function mode Press FREEZE until the normal screen appears Watching the TV Previous channel AL 991 Frozen picture gt With Freeze function active some functions are unavailable such as WEGA GATE You can reduce the power consumption of the TV POWER SAVING A gt appears Power Saving Standard Power Saving Reduced Power Saving Picture Off To cancel the Power Saving mode Press POWER SAVING repeatedly until Power Saving Standard 39 Watching the TV Using the Sleep Function S If you turn the TV off and then turn it on again the Sleep timer returns to Sleep Off TV will turn off soon appears one minute before the TV shuts off This message may not appear if you are performing other operations in the settings X You can set the Sleep timer too on using setting Select Sleep in the Clock Timers settings then set it to 15 30 45 60 90 or Off 40 You can set the TV to turn off automatically after a predetermined period of time 15 30 45 60 or 90 minutes SLEEP Sleep 15 gt Sleep 30 Sleep 90
13. list Press TV VIDEO repeatedly to select the input VIDEO 1 2 or 3 Watch cable channels Press WEGA GATE to select the VCR input Video 1 2 or 3 in the External Inputs list Press TV VIDEO repeatedly to select the input VIDEO 1 2 or 3 Set up the remote control to You must program the remote control See Programming the Remote Control on operate the VCR page 34 Activate the remote control to Press DVD VCR FUNCTION operate the VCR Control VCR functions with the Operating a on page 36 remote control Label video inputs to easily See the instructions for setting up Label Video Inputs on page 61 identify equipment connected to the TV 23 AL 2 Connecting the TV DVD Player For best results use this connection if your DVD player has component video YPsPr jacks To connect a DVD player with component video connectors 1 Use a component video cable to connect the DVD player s output jacks to the TV s input jacks HD DVD IN 4 The YPBPR jacks on your DVD player are sometimes labeled Y and or Y B Y and R Y If so connect the cables to their matching color jacks 2 Usean audio cable to connect the DVD player s audio output jacks to the TV s audio input jacks HD DVD IN 4 y The YPsPn jacks do not provide audio so audio cables must be connected to provide sound iae 1 PB Rear of TV NOS Comp
14. 12 VOL 32 Press to mute the sound Press again or press VOL to restore the sound Press once to display the current channel number channel label time and Wide Mode settings The OSD on screen display will be canceled after a few seconds or press again to immediately cancel the display Press repeatedly to cycle through the power saving modes Standard Reduced Picture Off See Power Saving on page 61 Press to freeze the picture The current program appears in the sub screen when freeze is selected Press again to restore the picture You can use this feature to write down information such as phone numbers recipes etc y Some functions will not be available in freeze Press to jump back and forth between two channels The TV alternates between the current channel and the last channel that was selected Press to go back to the previous screen when displaying settings Press to navigate to TV functions See Introducing WEGA GATE on page 42 Press to have the remote control operate the equipment you want See Programming the Remote Control on page 34 When FUNCTION is switched on DVD VCR these buttons operate the video equipment you have programmed into the remote control See Using Other Equipment with Your Remote Control on page 36 49 Rewind We Play gt gt Fast forward Pause W Stop Record Press to display the top menu of your DVD VCR Press to display the menu of your DVD or Satellit
15. 807 811 812 f an Aiwa VCR does not work even though you enter the code for Aiwa enter the code for Sony instead 35 AL 991 Watching the TV Using Other Equipment with Your Remote Control To operate other connected equipment with your TV first turn to page 35 and program the necessary code For operating video equipment press TV VIDEO repeatedly until you see the video input on the screen for your connected equipment Remote control operation tips are provided below y Some functions cannot be operated depending on the equipment In that case operate by the remote control supplied with the equipment Operating a Cable Box To Do This Press To Do This Press Activate the remote control to operate g aT CABLE FUNCTION Select a channel 0 9 ENT the cable box Change channels CH Turn on off POWER Back to previous channel JUMP Operating a Satellite Receiver To Do This Press To Do This Press Activate the remote control to operate Display SAT Guide GUIDE the satellite receiver SAT CABLE FUNCTION Turn on off POWER Display SAT Menu MENU Select a channel 0 9 ENT Move highlight cursor Change channels CH Select item Back to previous channel JUMP Switch between the TV and satellite TV SAT broadcasts Display channel number DISPLAY Operating a VCR To Do This Press To Do This Press Activate the remote control to FUNC
16. SYSTEM EXTREME CARE SHOULD BE TAKEN TO KEEP FROM CONTACTING SUCH POWER LINES OR CIRCUITS AS CONTACT WITH THEM IS ALMOST INVARIABLY FATAL Be sure the antenna system is grounded so as to provide some protection against voltage surges and built up static charges Section 810 of the National Electrical Code NEC in USA and Section 54 of the Canadian Electrical Code in Canada provides information with respect to proper grounding of the mast and supporting structure grounding of the lead in wire to an antenna discharge unit size of grounding conductors location of antenna discharge unit connection to grounding electrodes and requirements for the grounding electrode Antenna Grounding According to the National Electrical Code ANSI NFPA 70 Antenna lead in wire Ground clamps Antenna discharge unit NEC Section 810 20 Electric service Grounding conductors NEC Section 810 21 equipment Ground clamps 4 Power service grounding electrode system NEC National Electrical Code NEC Art 250 Part H Lightning For added protection for this TV during a lightning storm or when it is left unattended and unused for long periods of time unplug it from the wall outlet and disconnect the antenna This will prevent damage to the receiver due to lightning and power line surges 8 Service Damage requiring service Unplug the unit from the wall outlet and refer servicing to qualified service personnel u
17. VA 13 Unplug this apparatus during lightning storms or when unused for long periods of time 14 Refer all servicing to qualified service personnel Servicing is required when the apparatus has been damaged in any way such as power supply cord or plug is damaged liquid has been spilled or objects have fallen into the apparatus the apparatus has been exposed to rain or moisture does not operate normally or has been dropped Important Safeguards Before using your TV please read these instructions completely and keep this manual for future reference Carefully observe and comply with all warnings cautions and instructions placed on the unit or described in the operating instructions or service manual WARNING To guard against injury the following basic safety precautions should be observed in the installation use and servicing of the unit Use Power Sources This unit should be operated only from the type of power source indicated on the information label If you are not sure of the type of electrical power supplied to your home consult your dealer or local power company Grounding or Polarization This unit is equipped with a polarized AC power cord plug a plug having one blade wider than the other or with a three wire grounding type plug a plug having a third pin for grounding Follow the instructions below For the unit with a polarized AC power cord plug This plug will fit into the power outlet
18. and inputs are changed set 4 3 Default to Off Option Wide Mode Select a Wide Mode to use for 4 3 sources 4 3 Default Select the default Screen Mode to use for 4 3 sources Screen ey M 122 Wide Mode Wide Zoom 4 3 Default Normal 4 Press Overscan Full Zoom to select 25 Center G3 7 IZ Select Set Back Exit Description Wide Zoom Normal Full Zoom Wide Zoom Normal Full Zoom Off Using the Settings The Screen settings includes the following options To highlight an option and to change settings press 4 Press to confirm the selection Select to enlarge to fill screen with minimum distortion Select to display 4 3 picture in original size when the original source is 4 3 Standard definition source sBulyjag y Select to enlarge the original picture horizontally to fill the screen when the original source is 4 3 Standard definition source When the original source is 16 9 High definition source select this mode to display 16 9 picture in original size Select to enlarge the original picture without distorting the aspect ratio Select to enlarge the 4 3 picture to fill the 16 9 screen keeping the original image as much as possible Select to return the 4 3 picture to its original size Select to enlarge the 4 3 picture horizontally only to
19. channel For details see Using the Channel Settings on page 53 18 Connecting the TV Satellite Receiver This scenario shows a SAT Box connected through the video inputs and the and Cable Antenna Cable Antenna connected through the VHF UHF input Satellite signals are selected by the SAT Box through the video inputs while TV signal is selected by the TV tuner To connect a satellite receiver 1 Connect the satellite antenna cable to the satellite receiver s satellite If you connect the input jack Aun Ma 2 Usean A V and S VIDEO cables to connect the satellite receiver s ed AUDIO and S VIDEO output jacks to the TV s AUDIO and S VIDEO component video input jacks VIDEO 1 or 3 Connect the supplied 75 ohm coaxial cable from the antenna to the TV s VHF UHF input jack 4 Run the Initial Setup program as described in Setting Up the Channel List on page 30 cables see page 20 AL Buijoeuuo2 gt If your satellite receiver is equipped with S VIDEO use VIDEO cable yellow instead of the S VIDEO cable 1 Satellite Satellite Receiver e SATELLITE IN lA AUDIO R AUDIOL VIDEO S VIDEO C 75 ohm savia LINE OUT EA 9097 a VHF UHF Rear of TV 2 S VIDEO cable 77 S VIDEO ee VIDEO VIDEO yellow i 9 VIDEO gt Notes on Using This Connection
20. from the Manufacturer s Codes listed on page 35 If more than one code number is listed try entering from the code listed first 1 Press and hold the Or FUNCTION button you want to program on the remote control and press the C5 button simultaneously The selected FUNCTION button DVD VCR or SAT CABLE will flash 2 Enter the three digit manufacturer s code number using the 0 09 buttons while the button is lit approximately 10 seconds 3 Press button TOPMENU MENU GUIDE SLEEP When the programming is correct the selected FUNCTION button will OROROORO flash twi p VOL CH ash twice slowly and when not flashes five times quickly To check if the code works Aim your TV s remote control at the equipment and press the green Et POWER button If the equipment responds the programming is completed 0 If not try the next code listed SOUND PICTURE WIDE SONY If no code is input within the above specified time or an invalid or incorrect code number is input the remote control automatically goes back to the previous setting gt In some cases you may not be able to program your remote control to operate other equipment In such cases use the equipment s own remote control Insert two size AA batteries supplied by matching the y Dead batteries or removing the batteries may cause the and on the batteries to programmable codes to be lost and revert back to factory s
21. of panel gt If your camcorder is not equipped with S VIDEO use a VIDEO cable yellow instead of the S VIDEO cable If you have a mono camcorder connect its audio output jack to the TV s L MONO audio input jack PlayStation Camcorder Left side of TV white AUDIO R red S VIDEO cable AN cable Notes on Using This Connection To Do This Do This Watch the camcorder or Press WEGA GATE to select the camcorder or game input Video 2 in the External PlayStation Inputs list or Press TV VIDEO repeatedly to select the camcorder or game input Video 2 Label video inputs to easily See the instructions for setting up Label Video Inputs on page 61 identify equipment connected to the TV 29 AL 2 Connecting the TV Setting Up the Channel List Using Initial Setup 30 After you finish connecting your TV you need to run Initial Setup which automatically sets up available channels The Initial Setup screen appears when you turn on your TV for the first time after hooking it up If you do not want to set up the channels at this time you can do it later by selecting the Auto Program option in the Channel settings see page 53 gt The Auto Program feature does not apply for installations that use a cable box The factory default setting for channel selection is Cable ON For antenna connections run the Auto Program again after se
22. only one way This is a safety feature If you are unable to insert the plug fully into the outlet try reversing the plug If the plug still fails to fit contact your electrician to have a suitable outlet installed Do not defeat the safety purpose of the polarized plug by forcing it in Wall outlet Do not use a poor fitting outlet Insert the plug fully into the outlet If it is loose it may cause arcing and result in fire Contact your electrician to have the outlet changed Wiring For your safety unplug the AC power cord when wiring cables Electric shock Do not touch the AC power cord or the unit with wet hand If you plug unplug the AC power cord from the unit with a wet hand it may cause electric shock Cleaning 7 Clean the AC power plug regularly 2 Ifthe plug is covered with dust and it picks up moisture its insulation may deteriorate i op and result in fire Unplug the AC power plug and clean it regularly Unplug the AC power cord when cleaning this unit If not it may result in electric shock 8 Clean the cabinet of the TV with a dry soft cloth To remove dust from the screen wipe it gently with a soft cloth Stubborn stains may be removed with a cloth slightly dampened with a solution of mild soap and warm water Never use strong solvents such as thinner or benzine for cleaning If using a chemically pretreated cloth please follow the instruc
23. repeatedly until the TV displays the time in minutes 15 30 45 60 or 90 that you want the TV to remain on before shutting off To cancel Sleep Timer press SLEEP repeatedly until Sleep Off appears 23 GUIDE Press to display the program guide of your satellite program provider CH Press to scan through channels To scan quickly through channels press and hold down either CH 25 TV SAT Press to switch between the TV and the satellite receiver when FUNCTION is switched on SAT CABLE Press to select the sound effect modes TruSurround Simulated Off The sound effect modes can be also accessed in the Audio settings See Selecting Audio Options on page 49 WIDE Press repeatedly to step through the Wide Screen Mode settings Wide Zoom Normal Full Zoom The Wide Screen Mode settings can be also accessed in the Screen settings See page 51 y GUIDE and TV SAT buttons are functional when the SAT CABLE function button is selected 33 AL 991 Watching the TV Programming the Remote Control The remote control is preset to operate Sony brand video equipment MTS POWER MUTING DISPLAY SAP Sony Equipment Programmable Code Number O net DVD VCR 601 Sony Dream System SAVING FREEZE VIDEO OO O SAT Cable 801 Sony Satellite Receiver Follow the steps below to program your TV s remote control to operate the non Sony video equipment Find the three digit code for your equipment
24. service center to exchange it Batteries Do not dispose of batteries in a fire Do not short circuit disassemble or overheat the batteries Dispose of used batteries To preserve our environment dispose of the used batteries according to your local laws or regulations Objects and Ventilation holes Never push objects of any kind into the unit through OFS the cabinet slots as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock Never spill liquid of any kind on the unit 00 020 Do not place any objects on the unit The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids such as vases shall be placed on the apparatus Attachments Do not use attachments not recommended by the manufacturer as they may cause hazards X N Lan Continued 5 Medical institution Do not place this unit in a place where medical LCD screen Although the LCD screen is made with high precision technology equipment is in use It may cause malfunction of medical instruments Moisture and flammable objects Do not use power line operated sets near water for example near a bathtub washbowl kitchen sink or laundry tub in a wet basement or near a swimming pool etc It may result in fire or electric shock o Do not let this unit get wet Never spill liquid
25. the WEGA GATE control panel Label Video Inputs The Skip label is useful for inputs to which no equipment is connected Language Auto YC XX To change from one Power Saving option to another use POWER SAVING on the remote control Power Saving Light Sensor Allows you to identify A V equipment you connected to the TV such as a VCR DVD etc For example if you have a DVD player connected to the VIDEO 4 jack you can select the label DVD for the VIDEO 4 input Then when you press TV VIDEO to change inputs the Video Label you assigned to that input appears on screen Press 4 4 to highlight the video input VIDEO 1 6 to which you want to assign a label Then press to select the input 2 Press 4 9 to highlight one of the displayed labels Then press to select the label You can select from the following labels for each input Video 1 3 Video 1 3 VHS DVD Receiver Satellite Cable Box 8mm DTV Game LD Beta Skip Video 4 5 Video 4 5 DVD Satellite Cable Box DTV HD Game PVR Skip Video 6 Video 6 PC DVD HD Game Skip If you select Skip your TV skips this input when you press the TV VIDEO button Select to display all on screen Settings in your language of choice English Espa ol Fran ais When connecting both VIDEO IN and S VIDEO IN you can select the jack from which the TV receives the input signal The TV is factory set to receive S VIDEO input signals 1 Press TV VIDEO repeatedly
26. until the desired video input appears 2 After selecting the Auto YC option to watch the pictures input from the S VIDEO input jack Press 4 to select On then press To watch the pictures input from the VIDEO input jack Press 4 to select Off then press 3 Press WEGA GATE to exit Settings eui Standard Select to view picture without the benefit of Power Saving Reduced Select to view picture with reduced power consumption It also enhances the black level Picture Off Select to turn off the picture Audio stays on with your selected volume setting Select On to enable the automatic brightness control The light sensor measures the room brightness which allows the TV to automatically adjust the picture brightness based on the picture settings and the ambient room light conditions gt Be sure not to put anything around the sensor as its function may be affected See page 13 on the sensor 61 Other Information Troubleshooting Trouble Symptoms and Remedies Problem Possible Remedies No picture screen not lit no sound No picture No picture Cannot receive any channels Cannot receive upper channels UHF when using an antenna TV is locked to one channel Cannot receive any channels when using cable TV Cannot receive or select channels The TV turns off automatically No picture from some video sources Poor picture Double images or ghosts 62
27. your Macintosh computer to connect to the PC IN RGB IN terminal of the TV Use an optional adapter if necessary If you use an adapter first connect the adaptor to your computer then connect the supplied HD15 HD15 cable X Depending on the PC you will find a flicker or noisy picture in the screen when inputting corresponding signal In that case adjust Phase and Pitch in the Screen settings Right side of TV To PC IN RGB IN jack Rear of TV Audio cable optional stereo mini jack HD15 HD15 cable analog RGB supplied To D Sub output terminal Audio output terminal Notes on Using This Connection To Do This Do This Watch the PC Press WEGA GATE to select the PC input Video 6 in the External Inputs list or Press TV VIDEO repeatedly to select the PC input Video 6 Label video inputs to easily See the instructions for setting up Label Video Inputs on page 61 identify equipment connected to the TV 28 Connecting the TV Camcorder or For easy connection to a camcorder or PlayStation the TV has left side A V PlayStation input jacks If you prefer you can connect the camcorder to the TV s rear A N input jacks To connect a camcorder or PlayStation Use an A V and S VIDEO cables to connect the camcorder or PlayStation s AUDIO and S VIDEO output jacks to the TV s AUDIO and 5 VIDEO input jacks VIDEO 2 on the left side
28. 10 with stand 566 x 448 x 218 mm 22 3 8 x 17 3 4 x 8 5 8 inches without stand 566 x 411 x 89 mm 22 3 8 x 16 1 4 x 3 5 8 inches Model name Rating In standby Mass KLV S19A10 with stand 9 9 kg 21 Ib 14 oz without stand 6 3 kg 13 Ib 15 oz KLV S23A10 with stand 12 3 kg 27 Ib 2 oz without stand 8 7 kg 19 Ib 3 oz Supplied accessories Remote control 001 1 Size AA batteries 2 75 ohm coaxial cable 1 AC power cord 1 AC power adaptor 1 KLV S19A10 only HD15 HD15 cable 1 Support belt 1 securing screw 1 and wood screw 1 Operating Instructions 1 Quick Setup Guide 1 Leaflet Installing the Wall Mount Bracket to the TV 1 Warranty Card 1 Optional accessories Headphones plug adaptor Connecting cables Wall Mount Bracket SU WL11 KLV S19A10 SU LW1 KLV S23A10 i Optional accessories availability may depend on its stock Design and specifications are subject to change without notice 65 Index 4 3 Default screen setting 51 5 1 Channel DVD using with remote control 37 A ACIN 16 Audio Out 50 AUDIO OUT jack described 16 Audio setting 46 49 Auto Program 30 53 Auto SAP MTS setting 49 Auto YC 61 B backlight adjusting 48 balance adjusting 49 bass adjusting 49 bilingual audio 49 black corrector 48 brightness adjusting 48 C cable channel setting 53 with VCR connecting 22 cab
29. 17 318 341 330 335 338 329 304 309 322 339 340 332 306 304 305 338 309 308 309 305 304 330 314 336 337 314 336 337 345 346 347 314 336 332 337 332 332 305 330 335 338 308 309 310 314 336 337 332 309 335 305 304 323 324 325 326 325 338 321 314 336 337 309 308 327 317 308 309 306 307 305 304 308 309 308 309 310 308 308 309 306 304 305 308 309 311 312 313 310 329 309 330 328 335 324 338 314 322 313 321 330 335 312 313 321 335 323 324 325 326 Manufacturer Sharp Watching the TV 327 328 Signature 2000 M 338 327 Ward SV2000 Sylvania Symphonic Tashiro Tatung Teac Technics Toshiba Wards Yamaha Zenith Cable Boxes Manufacturer Sony Hamlin Regal Jerrold G I Motorola Oak Panasonic Pioneer Scientific Atlanta Tocom Zenith 338 308 309 338 310 338 332 314 336 337 314 336 338 337 309 308 312 311 327 328 335 331 332 314 330 336 337 331 230 222 223 224 225 226 201 202 203 204 205 206 207 208 218 222 227 228 229 219 220 221 214 215 209 210 211 216 217 212 213 Satellite Receivers Manufacturer Code Sony Dish Network Echostar General Electric Hitachi Hughes Mitsubishi Panasonic RCA PROSCAN Toshiba Philips Samsung 801 810 810 802 805 804 809 803 802 808 806
30. GATE Settings Parent to select O Chance Passwod Custom E Je CO Ge ED Use 0 9 on the remote control to enter a four digit password The first time you create password confirm the password by entering it Select Set Back s Exit GwEsx anre again The Parent settings options appear To exit the Parent settings press o You need your password for any future access into the Parent settings If you lose your password see Lost password on page 64 Selecting Parent Options If you are not familiar with the Parental Guideline rating system you should select Child Youth or Y Adult to help simplify the rating selection To set more specific ratings select Custom For descriptions of Child Youth and Y Adult ratings see page 56 The Parent settings includes the following options eui To change settings press 4 Press to confirm the selection Option Description Lock Turn ratings on off and select a rating system Select Country Change Password Off Child Youth Y Adult Custom U S Canada Parental lock is off No programs are blocked from viewing Maximum ratings permitted are US TV Y TV G Ll Canada G TV Y TV G Maximum ratings permitted are US TV PG PG Ll Canada C8 PG 8 TV PG Maximum ratings permit
31. MTS setting 49 Support Belt 11 swivel 12 T U tilt 12 time Clock Timers setting 58 Timer 58 TIMER LED 13 TOP MENU button 32 treble adjusting 49 troubleshooting 62 64 TruSurround Effect 49 turning on off the TV 18 TV FUNCTION button 32 TV List WEGA GATE 43 45 TV SAT C button 33 TV VIDEO button 13 33 V V Center adjusting 52 Variable audio setting 50 VCR using with remote control 36 with cable connecting 22 VHF UHF jack described 16 Video setting 46 48 VIDEO AUDIO L R jacks described 14 16 Vivid mode 48 VOL buttons 13 32 W X Y Warm Color Temp 48 WEGA GATE 10 42 WEGA GATE button 13 32 WIDE button 33 Wide mode 38 51 Wide Screen described 10 Wide Zoom mode screen setting 38 51 Wide Zoom mode setting 51 Z Zoom mode screen setting 38 51 67 http Awww sony net 2 Printed on 100 recycled paper Printed in Japan
32. Operating a DVD HDD Combo Unit To Do This Press Activate the remote control to operate the DVD HDD DVD VCR FUNCTION Turn on off POWER Select the HDD F1 Select the DVD F2 Play Stop Pause Operating AV Receiver To Do This Press Turn on off POWER VOL MUTING Change volume To Do This Watching the TV Press gt gt Search the picture forward or backward PP lt 4 during playback Move highlight cursor Select item Change volume To Do This Search the picture forward or backward PP or lt 4 during playback Move highlight cursor and select DVD Record VCR Change channels VCR Specify the previous chapter track Specify the next chapter track To Do This VOL MUTING 5 Press 5 5 2 while pressing 0 9 ENT using tuner CH CH Press Search the picture forward or backward PP 44 during playback Move highlight cursor and select Record Specify the previous chapter track Specify the next chapter track Display the menu setup Display the top menu while pressing CH CH MENU TOP MENU 37 Watching the TV Special Buttons on the Remote Control Using the Wide Screen Mode X When the TV receives a 720p 1080i signal that is 4 3 aspect ratio picture with a black bar at each side Full returns the picture to its original size You
33. TION Fast forward gt the Rewind the tape lt lt Turn on off POWER Pause press again to resume Change channels CH normal playback Record while pressing Search the picture forward or backward P or lt 4 during playback release to resume normal Play playback Stop Operating DVD Player DVD Changer Do This Press To Do This Press Activate the remote control to operate DVD VCR FUNCTION Step through different PP to step forward 44 to the DVD tracks of the disc step backward Turn on off POWER Step through different chapters of the CH to step forward or disc CH to step backward If you have a DVD changer 1 to skip disk Select a track directly 0 9 ENT Play Display the menu setup MENU Stop Display the top menu TOP MENU Pause press again to resume Operatethe DVD menu trt normal playback Operating 5 1 DVD AV System Sony DAV To Do This Press Activate the remote control to operate the DVD DVD VCR FUNCTION Turn on off POWER Select other equipment connected to 1 the DAV Skip a disk F2 Display the DVD menu TOP MENU Display the menu setup MENU Operating a DVD VCR Combo Unit To Do This Press Activate the remote control to operate DVD VCR FUNCTION the DVD VCR Turn on off POWER If you have a DVD VCR combo component Select the DVD F1 Select the VCR F2 Display the DVD menu MENU Play Stop Pause
34. V List feature lets you select TV programs from a list of channel labels You can also assign a label using Label Channels in the Channel settings see page 54 1 Select TV List from the WEGA GATE control panel and press The TV channel list appears Make your selection TV List Select 9 Set Exit weca cate 2 Press to highlight the desired channel and press gt J Using External Inputs in WEGA GATE The External Inputs feature lets you select the external inputs connected to your TV You can also assign a label using Label Video Inputs in the Setup settings see page 61 1 Select External Inputs from the WEGA GATE control panel and press The External Inputs list appears Make your selection Videos WEGA GATE 2 Press to highlight the desired external input and press Using Settings in WEGA GATE The Settings feature lets you enter to the settings screen where most of advanced settings and adjustments are performed See Overview of the Settings in page 46 45 31V9 Using the Settings Overview of the Settings The Settings provides you access to the following features Settings Allows you to set change Video Picture Mode page 48 CineMotion page 48 Video EET Reset page 48 Black Cor
35. alanced sync negative AUDIO 500 mVrms 100 modulation Impedance 47 kilohms HD DVD IN 4 YPBPR Component Video Y 1 0 Vp p 75 ohms unbalanced sync negative PB 0 7 Vp p 75 ohms PR 0 7 Vp p 75 ohms Signal format 480i 480p 720p 10801 AUDIO 500 mVrms 100 modulation Impedance 47 kilohms HDMI IN 5 HDMI Video 480i 480p 720p 10801 Audio Two channel linear PCM 32 44 1 and 48 kHz 16 20 and 24 bits AUDIO 500 mVrms 100 modulation Impedance 47 kilohms AUDIO OUT 500 mVrms 100 modulation More than 1 Vrms at the maximum volume setting Variable More than 500 mVrms Fixed PC IN 6 D sub 15 pin analog RGB 0 7 Vp p 75 ohms positive See the PC Input Signal Compatibility Chart on page 52 PC AUDIO INPUT Stereo mini jack 0 5 Vrms 1 kilohm Headphones Stereo mini jack Impedance 16 ohms Other Information Speaker Full range 4 x 10 cm 15 7 x 39 3 8 inches 2 Speaker output SW 5W Power requirement KLV S23A10 120 240 V AC 50 60 Hz KLV S19A10 18 V DC with AC power adaptor AC power adaptor for KLV S19A10 AC FD008 Input AC 100 V 240 V 50 60 Hz 128 W Output DC 18 V 6 11 A Power consumption In use KLV S19A10 95 W KLV S23A10 110 W KLV S19A10 Less than 1 3 W KLV 823A10 Less than 1 W Dimensions W H D KLV S19A10 with stand 468 x 402 x 218 mm 18 1 2 x 15 78 x 8 5 8 inches without stand 468 x 364 x 84 mm 18 1 2 x 14 3 8 x 3 3 8 inches KLV S23A
36. antenna Connects the supplied DC power cord Connects the supplied AC power cord Connects to the S VIDEO output jack of your VCR or other video equipment that has S VIDEO S VIDEO provides better picture quality than the composite video 5 Connect to the composite video and audio output jacks on your VCR or other video component third composite video and audio VIDEO 2 is located on the left side panel of the TV Connect to your DVD player s or digital set top box s component video and audio L R jacks Component video provides better picture quality than the S VIDEO 4 or the composite video 5 connections Connects to a personal computer s audio output connector Connect to the left and right audio input jacks of your audio or video equipment You can use these outputs to listen to your TV s audio through your stereo system Connecting the TV To display clear crisp pictures first you must connect your TV correctly and also need to choose the correct display format see Changing the wide screen mode on page 38 It is strongly recommended to connect the antenna using the supplied 75 ohm coaxial cable to receive optimum picture quality signal A 300 ohm twin lead cable can be easily affected by radio noise and the like resulting in signal deterioration If you use a 300 ohm twin lead cable keep it as far away as possible from the TV AL 2 Making Video Your TV in
37. ass to select ic Balance 7 Steady Sound Off effect A MTS Stereo ay Speaker On Audio Out SA HD Select Set Back Exit WEGA Reset bar adjustments to the default setting for each Sound Mode Dynamic Natural Clear Voice except for the options grayed out Using the Settings The Audio settings includes the following options To highlight an option and to change settings press Press to confirm the selection eui Adjust to increase or decrease higher pitched sounds Adjust to increase or decrease lower pitched sounds Adjust to emphasize left or right speaker balance Auto Off TruSurround Simulated Off Stereo Auto SAP Mono Select to stabilize the volume Select to turn off Steady Sound Select for surround sound for stereo programs only Adds a surround like effect to mono programs Select for normal stereo or mono reception Select for stereo reception when viewing a program broadcast in stereo Select to automatically switch the TV to second audio programs when a signal is received If no SAP signal is present the TV remains in Stereo mode Select for mono reception Use to reduce noise during weak stereo broadcasts Continued 49 Using the Settings Option Description Speaker On Select to turn on the TV speakers Off Select to turn off
38. can also access the Wide Mode settings in the Screen settings For details see page 51 38 MODE 4 3 Original source 16 9 Original source Standard definition source High definition source Wide Mode Wide Zoom Wide Mode Normal Wide Mode Full Wide Mode Wide Zoom Wide Mode Full Wide Mode Zoom uA gt Wide Mode Zoom When the TV receives 720p 1080 signal Normal cannot be selected Changing the wide screen mode 4 3 Original source 16 9 Original source Standard definition source High definition source Wide Zoom e Normal This mode is not available Using the Jump Function Using the Freeze Function While the picture is frozen the sound continues to be output normally Using the Power Saving Function V If you turn off the TV while the Power Saving mode is on the mode stays on next time you turn on the TV You can set the Power Saving mode to on using the settings screen Select Power Saving in the Setup settings then set it to Standard or Reduced V When Picture Off is selected the PIC OFF LED lights You can change or jump between the last two channels P gt You can use this feature to write down information such as phone numbers recipes etc When you press the button once the current screen is frozen and the sub screen appears
39. ccompanying the appliance CAUTION To prevent electric shock do not use this polarized AC plug with an extension cord receptacle or other outlet unless the blades can be fully inserted to prevent blade exposure Note on Caption Vision This TV provides display of TV closed captioning in accordance with 815 119 of the FCC rules Declaration of Conformity Trade Name SONY Model KLV S19A10 KLV S23A10 Responsible Party Sony Electronics Inc Address 16450 W Bernardo Dr San Diego CA 92127 U S A Telephone Number 858 942 2230 This device complies with part 15 ofthe FCC rules Operation is subject to the following two conditions 1 This device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation If any liquid or solid object should fall inside the cabinet unplug the TV immediately and have it checked by qualified service personnel before operating it further If you will not be using the TV for several days disconnect the power by pulling the plug itself Never pull on the cord For details concerning safety precautions see Important Safety Instructions on page 4 and Important Safeguards on page 5 Installing o The TV should be installed near an easily accessible power outlet NOTIFICATION This equipment has been tested and found to comply with the limits for a Class B
40. channel based on the type of hookup page 53 If you are using another device to control channels be sure the FUNCTION button for that device has been pressed For example if you are using your cable box to control channels be sure to press SAT CABLE page 32 Select the Parent settings on the settings screen then enter the following master password 4357 The master password clears your previous password and allows you to enter a new password page 55 If after reading these operating instructions you have additional questions related to the use of your Sony TV please call our Customer Information Services Center at 1 800 222 SONY 7669 US residents only or 1 877 899 SONY 7669 Canadian residents only Before calling Sony customer support please write down the model and serial numbers of your TV You ll find this information on the front cover of this manual 64 Specifications Television system American TV standard Channel coverage VHF 2 13 UHF 14 69 CATV 1 125 Antenna 75 ohm external terminal for VHF UHF Screen size measured diagonally KLV S19A10 19 inches KLV S23A10 23 inches Panel System LCD Liquid Crystal Display Panel Display resolution horizontal vertical KLV S19A10 1 280 dots 768 lines KLV S23A10 1 366 dots x 768 lines VIDEO IN 1 2 3 S VIDEO 4 pin mini DIN Y 1 0 Vp p 75 ohms unbalanced sync negative C 0 286 Vp p Burst signal 75 ohms VIDEO 1 Vp p 75 ohms unb
41. chnology HDMI the HDMI logo and High Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC ENERGY STAR 5 B Important Safety Instructions 1 Read these instructions 2 Keep these instructions 3 Heed all warnings 4 Follow all instructions 5 Do not use this apparatus near water 6 Clean only with dry cloth 7 Do not block any ventilation openings Install in accordance with the manufacturer s instructions 8 Do not install near any heat sources such as radiators heat registers stoves or other apparatus including amplifiers that produce heat 9 Do not defeat the safety purpose of the polarized or grounding type plug A polarized plug has two blades with one wider than the other A grounding type plug has two blades and a third grounding prong The wide blade or the third prong are provided for your safety If the provided plug does not fit into your outlet consult an electrician for replacement of the obsolete outlet 10 Protect the power cord from being walked on or pinched particularly at plugs convenience receptacles and the point where they exit from the apparatus 11 Only use attachments accessories specified by the manufacturer 12 Use only with the cart stand tripod bracket or table specified by the manufacturer or sold with the apparatus When a cart is used use caution when moving the cart apparatus combination to avoid injury from tip over
42. cludes several types of video inputs When connecting your TV Audio Connections use the inputs that are available on your devices that provide the best video performance as described below Best Video Separate audio Performance Connector type connection required Homi HDMI High Definition Multimedia Interface Component video 480i 480p 720p 1 080i Yes 5 voeo S VIDEO VIDEO Composite video RF Coaxial No No When you connect video equipment to both the VIDEO and the 5 VIDEO input jacks make sure Auto YC in the Setup settings is set to On to view the S VIDEO input see page 61 17 Connecting the TV Basic Connections Cable System or Cable or VHF only or VHF UHF VHF UHF Antenna JEU P coaxial Rear of TV System VHF UHF jack From the Channel settings select Cable On or Cable Off for your type of input signal A ferrite core is factory attached to the supplied 75 ohm coaxial cable Do not detach the ferrite core from the coaxial cable The ferrite core is attached to one end of not the center of the supplied 75 ohm coaxial cable When connecting the cable to the TV insert the end with the ferrite core into the VHF UHF jack Cable Box Digital Use this hookup if Cable Box O You subscribe to a cable TV system that uses scrambled or encoded The supplied remote signals requiring a cable box to view all channels and control can be You do not intend to ho
43. digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures O or relocate the receiving antenna Increase the separation between the equipment and receiver O Connect the equipment into an outlet on a circuit different from that to which the receiver is connected O Consult the dealer or an experienced radio TV technician for help You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment For Customers in the United States If you have any questions about this product you may call Sony Customer Information Services Center 1 800 222 7669 or http www sony com For Customers in Canada This Class B digital apparatus complies with Canadian ICES 003 Safety O Operate t
44. e Receiver Press again to exit from the menu Press to adjust the volume Watching the TV Button Description 13 SOUND Press repeatedly to cycle through the sound modes Dynamic Natural Clear Voice See Selecting Audio Options on page 49 PICTURE Press repeatedly to cycle through the available video picture modes Vivid Standard Pro The video picture modes can be also accessed in the Video settings See Selecting Video Options on page 48 15 POWER Press to turn on and off the TV MTS SAP Press repeatedly to cycle through the Multi channel TV Sound MTS options Stereo Auto SAP Second Audio Program and Mono The MTS setting can be also accessed in the Audio settings See Selecting Audio Options on page 49 TV VIDEO Press repeatedly to cycle through the video equipment connected to the TV s video inputs y See 61 on setting up the video input labels including skip function 0 9 ENT Press O 9 to select a channel the channel changes after 2 seconds Press ENT to change channels immediately Press to move the on screen cursor To select an item press 20 F1 Press to select the function of your video equipment which is programmed on the TV s remote control See pages 36 37 for specific functions F2 Press to select the function of your video equipment which is programmed on the TV s remote control See pages 36 37 for specific functions 2 SLEEP Press
45. e video and audio output jacks on your camcorder or other video equipment Connects to your headphones If your headphones do not match the jack use a suitable plug adaptor not supplied Connect to a personal computer s video output connector Can be connected to other Analog RGB devices such as Video Conferencing or Set top Boxes See PC Input Signal Compatibility Chart on page 52 for the signal to be displayed HDMI High Definition Multimedia Interface provides an uncompressed all digital audio video interface between this TV and any HDMI equipped audio video component such as a set top box DVD player and A V receiver HDMI supports enhanced or high definition video plus two channel digital audio The AUDIO IN L R of HDMI IN is for DVI connection See page 27 for details Introducing the TV Rear Panel KLV S19A10 KLV S23A10 AL eui Tr AC IN VHF UHF VHF UHF 1 2 1 HD DVD IN VIDEO IN 1080i 720p 480p 480i Continued 15 Introducing the TV Jack e 9 N 16 VHF UHF DC IN KLV S19A10 AC IN KLV S23A10 VIDEO IN 1 3 S VIDEO VIDEO IN 1 3 VIDEO L AUDIO R HD DVD IN 4 1080 720 480p 480i L AUDIO R PC AUDIO IN AUDIO OUT Description RF input that connects to your VHF UHF
46. ecting Cables Adjusting the Viewing Angle of the TV 12 You can bundle the connecting cables as illustrated below 1 Bundle the connecting cables KLV S19A10 KLV S23A10 2 Route the connecting cables through the hook gt Do not bundle the AC power cord for KLV S23A10 in the stand with other connecting cables This TV can be adjusted within the angles shown below Adjust the angle back and forth Adjust the angle left and right tilt swivel Right view Top view Front y When adjusting the angle hold the stand with one hand to avoid slipping or tipping the stand Introducing the TV TV Controls and Connectors Front and Top Panel ENTER IUe SS vsum VOLUME CHANNEL TV VIDEO POWER AL eui TIMER POWER PIC OFF Description 1 ENTER Press to confirm the selection or setting 2 WEGA GATE Press to display WEGA GATE Press again to exit WEGA GATE 3 TV VIDEO Press repeatedly to cycle through the video equipment connected to the TV s video inputs gi Press to adjust the volume In the WEGA GATE screen these buttons serve as left right VOLUME buttons 5 4 Press to scan through channels To scan quickly through channels press and hold down either
47. el digital audio HH 1 Light Sensor Allows the picture brightness level to be optimized to ambient light The effect from the Light Sensor depends on the setting of Picture Mode and Power Saving The factory setting is Off Caption Vision Info Banner Allows Closed Caption and or Channel Programming Information to be displayed 10 Introducing the TV Installing the TV Preventing the TV Attaching the Support Belt from Toppling Over AL Buronpouju 1 Screw the support belt supplied to the TV stand with a wood screw supplied 2 Attach the support belt to the stand and screw the belt with a securing screw supplied using a coin etc 3 Adjust the length by pulling the support belt towards you while holding the TV stand gt Be sure to take measures to prevent the TV from toppling over and causing injury gt The supplied wood screw may not be used depending on the type of TV stand In this case or when the securing strength is not enough prepare commercial screws to fit to the TV stand Use commercial screws of 3 to 4 mm diameter Consult your dealer about the types of screw When Mounting on a Wall Be sure to use the following optional wall mount brackets to hang the TV on the wall KLV S19A10 SU WL11 KLV S23A10 SU LW1 See the Instruction Guide supplied with the wall mount bracket on how to mount the TV on the wall 11 Introducing the TV Bundling the Conn
48. enter Phase and Pitch adjustments you made to the factory settings Available only for PC input PC Input Signal Compatibility Chart Resolution Horizontal frequency Vertical VESA standard Signals x bo kHz frequency Hz VGA 640 x 480 3L5 60 640 480 37 9 73 640 480 37 5 75 720 x 400 31 5 70 SVGA 800 x 600 352 56 v 800 x 600 37 9 60 v 800 x 600 46 9 75 v 800 x 600 48 1 72 v 848 x 480 31 0 60 v XGA 1024 x 768 48 4 60 v 1024 x 768 56 5 70 v 1024 x 768 60 75 v WXGA 1280 x 768 47 4 60 1280 768 47 8 60 1280 768 60 3 75 1360 768 47 7 60 Corresponding to the VGA signal f This TV does not support Sync on Green or Composite Sync If a signal other than in the above chart is input it may not be displayed properly or may not be displayed as you set 5 Using the Vertical frequency Hz of the personal computer at 60 is recommended 52 s Using the Channel Settings To select the Channel settings 1 Press 2 Select WEGA GATE Settings E 3 Highlight Channel S 4 5 WEGA GATE To exit the Channel settings press Selecting Channel Options X Also you can access the Favorite Channels list on the WEGA GATE control panel Using the Settings Channel eam E5 Favorite Channels Cable On 4 Press Channel Fix Off Auto Program to select Show Hide Channels Label Channels v g N
49. ettings the diagram inside the Reprogramming the codes may be necessary remote control s battery compartment 34 Manufacturer s Codes DVD Players Manufacturer Code Sony General Electric Hitachi JVC Magnavox Mitsubishi Panasonic Philips Pioneer RCA PROSCAN Samsung Toshiba Zenith DVD Changers Manufacturer Sony Panasonic 751 755 758 756 757 761 753 757 752 755 758 754 760 Code 765 766 DVD VCR Combo Units Manufacturer Sony Zenith Toshiba Samsung JVC Broksonic Panasonic Code 767 768 773 774 775 776 777 HDD DVD Combo Units Manufacturer Sony 770 771 772 5 1ch DVD AV System Manufacturer Code Sony DAV AV Receivers Manufacturer Code Sony VCRs Manufacturer Code Sony Admiral M Ward Aiwa Audio Dynamic Broksonic Canon 601 602 603 604 764 301 302 303 327 338 344 314 337 319 317 309 308 Manufacturer Citizen Craig Curtis Mathes Daewoo DBX Dimensia Emerson Fisher Funai General Electric Go Video Goldstar Hitachi Instant Replay JC Penney JVC Kenwood LG LXI SEARS Magnavox Marantz Marta Memorex Minolta Mitsubishi MGA Multitech NEC Olympic Optimus Orion Panasonic Pentax Philco Philips Pioneer Quasar RCA PROSCAN Realistic Sansui Samsung Sanyo Scott Code 332 302 332 304 338 309 341 312 309 314 336 337 304 319 320 316 3
50. fill the 16 9 screen Select to enlarge the 4 3 picture horizontally and vertically to an equal aspect ratio that fills the 16 9 screen Useful for watching Letterbox movies Select to continue using the current Wide Screen Mode setting when the channel or input is changed Not available for PC input Continued 51 Using the Settings 4 3 Default Option Description Overscan are not Overscan Normal Displays a standard size picture available for PC Input 1 2 Allows you to adjust the viewable picture area size This is useful for viewing ticker tape or banners at the top or bottom of the screen Not available for PC input The setting of V Center V Center Allows you to move the position of the picture up and down in and H Center can be Vertical Center the window Available only in Wide Zoom and Zoom modes between 50 and 50 Press 4 4 and press to choose a correction between 10 for PC input and 10 Zoom mode and 10 and 10 Wide Zoom mode H Center Allows you to move the position of the picture left and right in Center feature is Horizontal the window This function allows for horizontal adjustment of useful if TV is Center connected to game ente e picture being displayed equipment Phase Adjust the horizontal stripes Available only for PC input Pitch Adjust the vertical stripes Available only for PC input Reset Clear Wide Mode V Center H C
51. he TV only on 120 240 V AC O Usethe AC power cord specified by SONY and suitable for the voltage where you use it The plug is designed for safety purposes to fit into the wall outlet only one way If you are unable to insert the plug fully into the outlet contact your dealer To prevent internal heat buildup do not block the ventilation openings Do not install the TV in a hot or humid place or in a place subject to excessive dust or mechanical vibration o Avoid operating the TV at temperatures below 5 C 41 F o If the TV is transported directly from a cold to a warm location or if the room temperature changes suddenly the picture may be blurred or show poor color due to moisture condensation In this case please wait a few hours to let the moisture evaporate before turning on the TV o To obtain the best picture do not expose the screen to direct illumination or direct sunlight It is recommended to use spot lighting directed down from the ceiling or to cover the windows that face the screen with opaque drapery It is desirable to install the TV in a room where the floor and walls are not of a reflective material CAUTION Use the following SONY appliance s only with the following WALL MOUNT BRACKET Use with other WALL MOUNT BRACKET may cause instability and possibly result in injury SONY APPLIANCE MODEL NO KLV S19A10 KLV S23A10 SONY WALL MOUNT BRACKET MODEL NO SU WLI11
52. hnician to perform routine safety checks as specified by the manufacturer to determine that the unit is in safe operating condition and to so certify Ask a qualified service technician to dispose of the unit Contents Introducing the TV Package 10 E RE Peu 10 Installing the TV eere 11 Preventing the TV from Toppling Over 11 Bundling the Connecting 12 Adjusting the Viewing Angle of the TV 12 TV Controls and Connectors 13 Front and Top 13 Side Panel 5 5 o 14 15 Making Video and Audio Connections 17 Basic Connections eene 18 Cable System or VHF UHF Antenna System 18 Cable Box Digital Cable 18 Satellite Receiver and Cable Antenna 19 HD 20 Connecting Optional Equipment 22 VCR Cable and Antenna 22 DVD Player c p t nei RORIS 24 HDMI Equipped Device 26 DVI HDTV Equipped 27 Personal 28 Camcorder or PlayStation
53. household waste The LCD contains a small amount of liquid crystal The fluorescent tube used in this display contains mercury Follow your local ordinances and regulations for disposal Handling of broken glass and liquid crystal leakage If the LCD panel gets damaged crystalline liquid leakage may occur or scattered broken glass may result Do not touch broken glass or crystalline liquid which is toxic with bare hands as cuts or poisoning skin irritation may occur Also do not let glass fragments or leaked crystalline liquid get into your eyes or mouth Should either contact your eyes or mouth rinse the contacted area thoroughly with water and consult your doctor and has effective pixels of 99 99 or more black dots may appear or bright points of light red blue or green may appear constantly on the LCD screen This is a structural property of the LCD panel and is not a malfunction O Do not expose the LCD screen surface to the sun Doing so may damage the screen surface O Do not push or scratch the LCD screen or place objects on top of the TV The image may be uneven or the LCD panel may be damaged Ifthe TV is used in a cold place a smear may occur in the picture or the picture may become dark This does not indicate a failure These phenomena improve as the temperature rises Ghosting may occur when still pictures are displayed continuously It may disappear after a few moments The screen and cabi
54. hung from the ceiling and cause injury Ship and vessel Do not install this unit in a ship or vessel If the unit is exposed to seawater it may cause fire or damage the unit Preventing the TV from toppling over Take measures to prevent the unit from toppling over and causing injury To prevent the unit from toppling over secure the unit to the wall or pillar Installing on a level surface Tf you install the unit on an inclined surface the unit may fall or drop and cause injury or damage Continued 7 Placing a stable surface If you place the unit on an unstable surface the unit may fall and cause injury or damage Fall Do not hang anything on the unit The unit may fall from the stand or wall mount unit causing damage or serious injury AC power cord Unplug the AC power cord when moving the unit Do not move the unit with the AC power cord plugged in It may damage the AC power cord and result in fire or electric shock Do not allow anything to rest on or roll over the power cord and do not place the unit where the power cord is subject to wear or abuse Antennas Outdoor Antenna Grounding If an outdoor antenna is installed follow the precautions below An outdoor antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits or where it can come in contact with such power lines or circuits WHEN INSTALLING AN OUTDOOR ANTENNA
55. ing options To highlight an option and to change settings press Press to confirm the selection another use PICTURE Option Description on the remote control Picture Vivid Select for enhanced picture contrast and You can alter the Picture Mode sharpness Mode options Vivid Customized Standard Select for standard picture settings Standard Pro for each picture viewing Recommended for home entertainment video input including Pro Select for professional monitor like appearance the TV antenna input You can alter the Video Reset settings Picture Brightness Color etc for each Mode Picture Brightness Color Hue Sharpness Color Temp White adjustment Color Hue Sharpness CineMotion Black Corrector and NR are not available for PC input CineMotion Black Corrector NR Noise reduction Backlight 48 settings Reset all settings and adjustments to the default setting for each Picture Mode Vivid Standard Pro except for the options grayed out Adjust to increase picture contrast or decrease picture contrast Adjust to brighten or darken the picture Adjust to increase or decrease color intensity Adjust to increase or decrease the green tones Adjust to sharpen or soften the picture Cool Select to give the white colors a bluish tint Neutral Select to give the white colors a neutral tint Warm Select to give the white colors a reddish tint Provides an optimi
56. ings feature lets you adjust the Video Audio Screen Channel Parent Clock Timers or Setup settings For details see page 45 Settings 43 FLV Introducing WEGA GATE Navigating and Select Use your remote control to navigate through WEGA GATE and the settings To Do This Press Display WEGA GATE control panel Press WEGA GATE Display Settings Press WEGA GATE and select Settings Move through Settings Press Select an option to change Press Move back to upper layer Select confirm changed setting Press RETURN or select Return in the settings Press or press 4 Exit WEGA GATE control panel or Settings Press WEGA GATE Using Favorites in WEGA GATE 44 The Favorites feature lets you select programs from a list of up to 8 favorite channels that you specify You can create a list using the Add to Favorites option 1 Select Favorites from the WEGA GATE control panel and press The Favorite Channels list appears Make your selection Favorite Channels Return Add to Favorites EE 2 Press f 9 to highlight the desired channel and press To add the current channel to the list of Favorite Channels highlight Add to Favorites and press When the Favorite Channels list is full remove channel from your list using Favorite Channels in the Channel settings and try again see page 53 Introducing WEGA GATE Using TV List in WEGA GATE The T
57. k Exit Wesrand Clock Timers Sleep page 58 Clock Timers cw Timer 1 page 58 22 Finer on Timer 2 page 58 Timer 2 Off Current Time Select Set Back Exit Setup Setup 722 Caption Vision Off Info Banner On 0 Label Video Inputs Language English 22 Auto Power Saving Standard 92 Light Sensor On 27 3 Cr Select Set Exit Current Time page 59 Caption Vision page 60 Info Banner page 60 Label Video Inputs page 61 Language page 61 Auto YC page 61 Power Saving page 61 Light Sensor page 61 47 eui Using the Settings Using the Video Settings To select the Video settings 2 Select Settings 1 Press WEGA GATE E To exit the Video settings press 3 Highlight Video B Selecting Video Options X To change from one Picture Mode to Video fies Picture Mode Vivid Reset Standard 4 Press 0 Picture Pro Brightness to select gt Color 50 Hue 0 Sharpness 15 Color cc k MODI CineMotion Off Black Corrector On A 4 NR Off 2 Backlight 5 Select Set G Back Exit WEGA The Video settings includes the follow
58. le box using with remote control 36 Camcorder connection 29 Caption Vision 10 60 CH buttons 13 33 Channel fix 58 Channel setting 46 53 channels creating labels 54 setting up 30 CineMotion 10 48 Clear Voice Sound Mode 49 Clock Timers setting 47 58 closed caption modes 60 color adjusting 48 Cool Color Temp 48 66 D DC IN 16 DISPLAY button 32 DVD player using with remote control 36 with A V connectors connecting 25 DVD VCR FUNCTION button 32 DVI HDTV equipped device connection 27 Dynamic Sound Mode 49 E effect setting 49 ENT button 13 33 External Inputs WEGA GATE 43 45 F F1 button 33 F2 button 33 Favorite Channels 53 Favorites WEGA GATE 43 44 Fixed audio setting 50 Freeze 39 FREEZE button 32 Full mode screen setting 38 51 Fulll mode screen setting 51 Full2 mode screen setting 51 FUNCTION buttons 32 G GUIDE button 33 H H Center adjusting 52 HD DVD IN jack 1080i 720p 480p 4801 described 16 HDMI IN jack described 14 HDMI equipped device connection 26 Headphones jack described 14 High Definition Multimedia Interface HDMI 10 hue adjusting 48 Info Banner 10 60 Infrared Receiver IR 13 39 JUMP button 32 L Label channels 54 videos 61 Language setup setting 61 Light Sensor described 10 13 setting 61 Lock parent setting 55 M MENU button 32 36 Mono MTS setting 49 MTS 49 MTS SAP button 33 MUTING butto
59. le signals connected through the video Antenna inputs and the Antenna connected through the VHF UHF input The Cable or VCR signals are selected by the VCR through the video inputs while TV signal is selected by the TV tuner The most common To connect the VCR and cable setup is the Cable input into the VCR Antenna 1 Connect the CATV cable to the VCR s VHF UHF input jack IN the VCR Antenna 2 Connect the supplied 75 ohm coaxial cable from the antenna to the Out e the VHF UHF TV s VHF UHF input jack input 3 Usean A V and S VIDEO cables to connect the VCR s AUDIO and S VIDEO output jacks to the TV s AUDIO and 5 VIDEO input jacks VIDEO 1 or 3 4 Run the Initial Setup Program as described in Setting Up the Channel List on page 30 gt If your VCR is not equipped with S VIDEO use a VIDEO cable yellow instead of the S VIDEO cable 75 ohm 2 coaxial cable O CATV cable VHF UHF Rear of TV S VIDEO z VCR VIDEO VIDEO yellow VIDEO L Ge liam AUDIO L AUDIO hit 9 R 00 k red AUDIOR AUDIOL VIDEO S VI Qo t 3 o m o ant L3 S VIDEO cable A V cable 22 Connecting the TV Notes on Using This Connection To Do This Do This Watch the VCR Press WEGA GATE to select the VCR input Video 1 2 or 3 in the External Inputs
60. lecting Cable Off from the settings To run Initial Setup the first time you turn on your TV 1 Press POWER to turn on the TV The Initial Setup screen appears 2 Press or to select the on screen display language Then press C The message First please connect cable antenna appears y By default Auto Program is set to scan cable TV channels 3 Press CH to start Auto Program Auto Program automatically creates a list of receivable channels When finished the lowest numbered channel is displayed When all the receivable channels are stored the Show Hide Channels settings appear To scan available VHF UHF antenna channels instead of the cable TV channels 1 Select Settings in WEGA GATE then go to Channel settings 2 Set Cable to 3 Start Auto Program by pressing CH To perform Auto Program again follow the above instructions Depending on your signal source be sure to set Cable to On or Off accordingly see page 53 The Initial Setup menu will appear each time the TV is turned on until you complete the scanning for the available channels Watching the TV Button Descriptions Button Description 1 MUTING 2 DISPLAY VIV IIIS FUNCTION Buttons PICTURE WIDE SONY Operating Buttons The 5 button CH button B Play button and MTS SAP button have a tactile dot Use them as a reference when operating the TV TOP MENU MENU
61. n 32 N Natural Sound Mode 49 Neutral Color Temp 48 Normal mode screen setting 38 51 Normal mode setting 51 NR Noise Reduction 48 off turning off the TV 13 on turning on the TV 18 Overscan 52 P Q Parent setting 47 55 parental control described 10 Password 55 PC AUDIO IN 16 PCIN 14 Personal Computer connection 28 phase adjusting 52 PIC OFF LED 18 PICTURE button 33 Picture modes selecting 48 Picture off power saving 61 picture adjusting 48 pitch adjusting 52 POWER button 13 33 POWER LED 13 Power Saving 39 61 POWER SAVING button 32 Pro mode 48 problems troubleshooting 62 64 R ratings Parent setting 56 57 ratings viewing blocked programs 56 57 Reduced power saving 61 remote control programming 34 35 RETURN button 32 S S VIDEO jack described 14 16 SAT CABULE FUNCTION buttons 32 satellite receiver using with remote control 36 Screen setting 46 51 Select Country 55 setting up channels 30 Settings Audio 46 49 Channel 46 53 Clock Timers 47 58 Parent 47 55 Screen 46 51 Setup 47 60 Video 46 48 Settings WEGA GATE 43 45 Setup setting 47 60 sharpness adjusting 48 Show Hide channels 54 Simulated Effect 49 Sleep 40 58 SLEEP button 33 SOUND button 33 Sound modes selecting 49 speaker turning on off 50 using external speakers 50 Standard mode 48 Standard power saving 61 Steady Sound described 10 setting 49 Stereo
62. nder the following conditions O When the power cord or plug is damaged or frayed Ifliquid has been spilled into the unit Ifthe surface of the TV cracks do not touch it unplug the AC power cord Iftheunit has been exposed to rain or water unit has been subject to excessive shock by being dropped or the cabinet has been damaged Iftheunit does not operate normally when following the operating instructions Adjust only those controls that are specified in the L operating instructions Improper adjustment of gt other controls may result in damage and will often require extensive work by a qualified technician to restore the unit to normal operation When the unit exhibits a distinct change in performance it indicates a need for service Servicing Do not attempt to service the unit yourself since opening the cabinet may expose you to dangerous voltages or other hazards Refer all servicing to qualified service personnel Replacement parts When replacement parts are required be sure the service technician certifies in writing that he she has used replacement parts specified by the manufacturer that have the same characteristics as the original parts M SERVICE DEPT Unauthorized substitutions may result in fire electric shock or other hazards Safety check Upon completion of any service or repairs to the unit ask the service tec
63. nel gt The DVI HDTV VIDEO connector does not provide audio so audio cables must be connected to provide sound when a DVI to HDMI adapter is used gt Do not connect a PC to the TV s HDMI input Use the PC IN RGB IN connector instead when connecting a PC AL Buijoeuuo2 2 Usean Audio cable to connect the device s AUDIO output jacks to the TV s AUDIO input jacks on the right side panel DVI HDTV Equipped Device Right side of TV DVI to HDMI adapter or cable mh AUDIO R red Audio cable AUDIO L white Notes on Using This Connection To Do This Do This Watch the device Press WEGA GATE to select the DVI HDTV equipped input Video 5 in the External Inputs list or Press TV VIDEO repeatedly to select the DVI HDTV equipped device input Video 5 Label video inputs to easily See the instructions for setting up Label Video Inputs on page 61 identify equipment connected to the TV 27 Connecting the TV Personal Computer To connect a PC personal computer If you connect your PC to the TV you can watch your personal computer s display on the TV When connecting to When your PC is connectd to the TV with the supplied HD15 HD15 cable an Apple Macintosh and optinal audio cable you can view and listen to the PC s video and audio computer use the output on the TV display output connecting cord supplied with
64. nes or stripes No color Dark picture Color is not correct The picture is too bright Noisy picture No sound Noisy sound Good picture no sound Audio noise Striped noise during playback recording of a VCR Cannot operate settings item Wide Screen Mode changes automatically Remote control does not operate Oo Ooco Oooo O Do Check if the antenna is broken or bent Check if the antenna has reached the end of its serviceable life 3 5 years in normal use 1 2 years at the seaside Keep the TV away from noise sources such as cars motorcycles or hair dryers Press PICTURE to select the desired Picture mode page 33 Adjust the Picture Mode options in the Video settings page 48 Press PICTURE to select the desired Picture mode page 33 Make sure that the antenna is connected using the supplied 75 ohm coaxial cable Keep the antenna cable away from other connecting cords Do not use 300 ohm twin lead cables as interference may occur Check the volume control Press MUTING or VOL so that Muting disappears from the screen page 32 Disconnect your headphones Set Speaker to On in the Audio settings page 50 If it is set to Off sound is not output from the TV s speakers regardless of the TV s volume control Make sure that the antenna is connected using the supplied 75 ohm coaxial cable Keep the antenna cable away from other c
65. net get warm when the TV is in use This is not a malfunction Avoid spraying insect repellent with volatile material to the screen Avoid prolonged contact with rubber or plastic made material Fluorescent lamp This TV uses a special fluorescent lamp as its light source If the screen image becomes dark flickers or does not appear the fluorescent lamp has run down and should be replaced For replacement consult qualified service personnel Installation Installation O When installing or removing the TV on the wall be sure to use qualified qm jm contractors Wall mount installation requires the use of a wall mount bracket If the TV is installed or removed from the wall by a person other than a qualified contractor the unit may fall and cause serious injury if the unit is not installed securely To prevent injury this apparatus must be securely attached to the stand wall in accordance with the installation instructions Placement for viewing It is recommended to watch the TV at a distance of 3 to 7 times that of the screen height and in moderate brightness Watching the TV for too long or in a dark room will cause eye fatigue Optional accessories Observe the following when installing the TV using a wall mount bracket If the TV is not secured properly it may fall and cause injury Be sure to follow the operating instructions supplied with the wall mount bracket when installing the unit
66. nly with the 0 9 buttons Also you can access the TV channel list on the WEGA GATE control panel 54 Option Description Show Hide Channels Label Channels Allows you to show or hide channels that appear when you use the CH buttons 1 Press 4 9 to scroll through the channels until you find the channel you want to show or hide Then press to select it 2 Press 4 9 to determine if the channel will be shown or hidden 3 Toshow or hide more channels repeat steps 1 and 2 4 Press to return to the Channel settings or press WEGA GATE to exit Settings Allows you to assign labels such as station call letters to channel numbers 1 Press 4 9 to scroll through the channel numbers Then press to select the channel number that you want to assign a label 2 Press to highlight Label and press 3 Press to scroll through the label characters A Z 0 9 etc Then press to select the highlighted character Repeat to add up to 5 characters to the label 4 To assign labels to more channels repeat steps 1 3 D Press to return to the Channel settings or press WEGA GATE to exit Settings lt 3 Using the Parent Settings Using the Settings The Parent settings allows you to set up the TV to block programs according to their content and rating levels To select the Parent settings Parent 22 Lock Off 1 Press 2 Select 3 Highlight 4 Press lt Select Country Child
67. of any kind on the unit If any liquid or solid ZES object does fall through do not operate the MZ 2 unit It may result in electric shock or HASS damage to the unit Have it checked ARE xS N immediately by qualified personnel To prevent fire keep inflammable objects or naked lights e g candles away from the unit Accessories Do not place the unit on an unstable cart stand table or shelf The unit may fall causing serious injury to a child or an adult and serious damage to the unit No part of the TV should overhang any edge of the TV cart or stand any overhanging edge is a safety hazard An appliance and cart combination should be moved with care Quick stops excessive force and uneven surfaces may cause the appliance and cart combination to overturn Broken pieces 5 Do not throw anything at the unit The screen glass may break by the impact and cause serious injury Cable wiring Take care not to catch your feet on the cables It may damage the unit Heat Do not touch the surface of the TV It remains hot even for some time after the TV is turned off Volume adjustment o Adjust the volume so as not to trouble your neighbors Sound carries very easily at night time Therefore closing the windows or using headphones is suggested When using headphones adjust the volume so as to avoid excessive levels as hearing damage may result Disposal of the TV Do not dispose of the TV with general
68. ok up any other audio or video equipment to programmed to operate your TV anne s 1 Connect the coaxial connector from your cable service to the cable Remote Control on box s IN jack page 34 2 Using the supplied 75 ohm coaxial cable connect the cable box s OUT To change channels jack to the TV s VHF UHF jack using the cable box set 75 aum coaxial your TV to channel 3 or Cable cable cable box channel output X If you will be controlling all channel selection through your cable box consider using the Channel Fix feature to set your TV to channel 3 Cable box 4 53 pages Also set Cable to On in the Channel settings see page 53 cd MT OUT jack Notes on Using This Connection To Do This Do This Use the cable box digital cable Tune the TV to the channel the cable box is set to and then use the cable box to box switch channels Set up the remote control to Program the remote control See Programming the Remote Control on page 34 operate the cable box digital cable box Activate the remote control to Press SAT CABLE FUNCTION operate the cable box digital cable box Control cable box digital cable See Operating a Cable Box on page 36 box functions with the remote control Prevent the accidental switching When using the cable box need the TV to stay on the channel the cable box is set of TV channels to You can use the TV s Channel Fix feature to lock in a specific
69. onent O video cable ES AD AUDIO L white 2 AUDIO R 54 red B eid i VEMM Audio cable DVD Player COMPONENT VIDEO OUT AUDIO OUT R AUDIO 1 L Y PR 0000 966 24 Connecting the TV Notes on Using This Connection Watch the DVD player Press WEGA GATE to select the DVD player input Video 4 in the External Inputs list Or Press TV VIDEO repeatedly to select the DVD player input Video 4 Set up the remote control to You must program the remote control See Programming the Remote Control on EE operate the DVD player page 34 9 Activate the remote control to Press DVD VCR FUNCTION 5 operate DVD player Control DVD functions with the Operating a DVD Player or DVD Changer on page 36 a remote control gt Label video inputs to easily See the instructions for setting up Label Video Inputs on page 61 ig identify equipment connected to lt the TV To connect a DVD player with S VIDEO and audio connectors If your DVD player does not have component video jacks or the component video inputs are already connected to another device use this connection 1 Use an S VIDEO cable to connect the DVD player s S VIDEO output jack to the TV s S VIDEO input jack VIDEO 1 or 3 2 Usean audio cable to connect the DVD player s AUDIO output jacks to the TV s AUDIO input jacks VIDEO 1 or 3 If you
70. onnecting cords Do not use 300 ohm twin lead cables as interference may occur Press MTS SAP to select Mono page 33 This is caused by video head interference Keep your VCR away from the TV Leave a space of 30 cm 11 7 8 inches between your VCR and the TV to avoid noise Avoid installing your VCR in front of the TV or at the side of the TV If the option you want to select appears in a pale color you cannot select it f The current Wide Screen Mode setting is automatically replaced with the 4 3 Default setting when you change the channel or video input if 4 3 Default in the Screen settings is set to other than Off If you want to lock in the Wide Screen Mode selected with the WIDE button set 4 3 Default to Off in the Screen settings page 51 The batteries could be weak Replace the batteries Check the polarity of the batteries Press the TV FUNCTION button first for TV operation Point the remote control at the remote control sensor of the TV Install the TV away from fluorescent lights Press FUNCTION button for corresponding device you want to control Continued 63 Other Information Problem Possible Remedies Cannot change channels with the remote control Lost password Contacting Sony If you are using another device to change channels be sure you have not inadvertently switched your TV from channel 3 or 4 setting Use the Channel Fix option to fix the
71. ontent or both TV G TV PG TV 14 TV MA Age Based Ratings All children Directed to children age 7 and older General Audience Parental Guidance suggested Parents Strongly cautioned Mature Audience only Content Based Ratings FV D L S V Unrated Allow Blockprograms or movies that are Block broadcast without a rating Fantasy Violence Suggestive Dialogue Strong Language Sexual situations Violence Allows programs and movies that are broadcast without a rating Blocks all programs and movies that are broadcast without a rating You can view blocked programs by entering the password Press ENT when tuned to a blocked program then enter the password This temporarily switches off Parent To reactivate the Parent settings turn off the TV When the TV is turned on again your Parent settings are reactivated Canadian Models Selecting Custom Rating Options Viewing Blocked Programs Using the Settings For Canadian models the Custom Rating menu includes the following options For US models see page 56 Option Description English Rating C8 G PG 14 18 French Rating G 8 ans 13 ans 16 ans 18 ans U S A Rating You can view blocked programs by entering the password Press ENT when tuned to a blocked program then enter the password This temporarily switches off Parent To reactivate the Parent settings turn off the TV When See US Models on page 56 for de
72. or other similar surface O Never place the unit in a confined space such as a bookcase or built in cabinet unless proper ventilation is provided Leave some space around the unit and the power adaptor Otherwise adequate air circulation may be blocked causing overheating and cause fire or damage the unit When installing the unit on the wall allow this much space 117 g inches 10 10cm 4 inches 4 inches E When installing the unit using a stand allow this much space 30cm 117 g inches 10 cm 4 inches i10 115 4 inches LL 6 inches j KLV S19A10 only When installing the AC power adaptor allow this much space 10 cm i 4inches 1 LU 1 i 10 cm 2 Au He inches ee in NE gt 10 GI Jl 4 inches 1 10cm 74 4inches 49 mi 4 inches d die R Never install the unit as follows Air circulation is blocked Air circulation is blocked dur ex Outdoor use Do not install this unit outdoors If the unit is exposed to rain it may result in fire or electric shock If the unit is exposed to direct sunlight the unit may heat up and it may damage the unit Vehicle and ceiling Do not install this unit in a vehicle or
73. p Set the time in minutes 15 minutes 30 minutes 45 minutes 60 minutes 90 minutes or Off that you want the TV to remain on before shutting off automatically Timer 1 You can use the Timers to program the TV to turn on and off Timer 2 and tune to a specific channel at two scheduled viewing times Timer 1 and Timer 2 are not available to be set until you set the Current Time 1 Press to highlight Timer 1 or Timer 2 To set the timer press or 2 Press 4 9 to highlight one of the following options then press Set Select to set the Timer by day time duration and channel On Select to turn on the timer Off Select to turn off the Timer Your previous settings are saved 3 if you selected Set in step 2 press to set the day s hour minute duration and channel number Press to confirm each setting and move to the next setting Press to go back to the previous setting and select On to turn on the timer TIMER LED on the front panel will light indicating the timer has been set 4 Press WEGA GATE to exit Settings Using the Settings Description Current Time Select to set the current time day hour minute and AM PM 1 Press to select Current Time 2 Press to set the current time day hour minute and AM PM Press or to confirm each setting and move to the next setting Press to go back to the previous setting 3 Press WEGA GATE to exit Settings 59
74. r DVD player is not equipped with S VIDEO use a VIDEO cable yellow instead of the S VIDEO cable 25 Connecting the TV HDMI Equipped To connect a device with HDMI connector Device Use an HDMI cable to connect the device s HDMI output connector to the TV s HDMI IN connector on the right side panel HDMI cables transmit both audio and video signals Separate audio cables are not necessary You can purchase HDMI cables at your local electronics store gt Do not connect a PC to the TV s HDMI input Use the PC IN RGB IN connector instead when connecting a PC HDMI Equipped Device Right side of TV HDMI cable Notes on Using This Connection To Do This Do This Watch the device Press WEGA GATE to select the HDMI equipped device input Video 5 in the External Inputs list Press TV VIDEO repeatedly to select the HDMI equipped device input Video 5 Label video inputs to easily See the instructions for setting up Label Video Inputs on page 61 identify equipment connected to the TV 26 Connecting the TV DVI HDTV Equipped _ device with DVI HDTV connector Device If the device does not have an HDMI connector you can connect the TV s HDMI IN connector to the device s DVI HDTV output connector using DVI to HDMI cable 1 Use a DVI to HDMI adapter or cable to connect the device s DVI HDTV output connector to the TV s HDMI IN connector on the right side pa
75. rector page 48 125 Picture page 48 NR pages 48 O We o ha Brightness page 48 Backlight pages 48 e Color page 48 G Hue page 48 Wo si Sharpness page 48 eet Color Temp page 48 TE Select BUS Set Exit wearer Audio Sound Mode page 49 Audio _ _ ori Reset page 49 22 page 49 OE M 55 49 c 1 Balance page 49 EM uf S Steady Sound page 49 22 oer N Effect page 49 5 49 127 aaa sara Speaker page 50 Audio Out page 50 Screen Wide Mode page 51 Screen ______ _ 4 3 Default page 51 522 Mie Mods Wide Zoom Overscan page 52 O des V Center page 52 ea A WE H Center page 52 CRY Phase page 52 8 Pitch page 52 ze Reset page 52 GL Select Set Back Exit WES Channel Favorite Channels page 53 Channel Cable page 53 Channel Fix page 53 pei Auto Program page 53 Auto Program Show Hide Channels Label Channels 9 3 Select s s3 Set Back Exit anre Show Hide Channels page 54 Label Channels page 54 Using the Settings Parent Lock page 55 Parent Select Country page 55 wear eee Change Password page 55 6 Change Password 2 Ge 6 Select Set G Bac
76. s must be connected to provide sound Rear of TV Component video cable Audio cable HD Equipment with Component Video 0 10 AUDIO AUDIO VIDEO OUT Some of the HD equipment you can connect to receive the broadcasting signals are digital cable box digital satellite receiver and digital TV receiver Connecting the TV Notes on Using This Connection To Do This Do This Watch the HD equipment Press WEGA GATE to select the DVD input Video 4 in the External Inputs list Press TV VIDEO repeatedly to select the DVD input Video 4 Set up the remote control to You must program the remote control See Programming the Remote Control on operate the HD equipment page 34 Activate the remote control to Press SAT CABLE FUNCTION operate the HD equipment Control HD equipment functions See Using Other Equipment with Your Remote Control on page 36 with the remote control Label video inputs to easily See the instructions for setting up Label Video Inputs on page 61 identify equipment connected to the TV 21 AL Buijoeuuo2 Connecting the TV Connecting Optional Equipment You can connect a variety of optional equipment to your TV This section provides some of the individual connections you can make For multiple connections please refer to the Quick Setup Guide VCR Cable and This scenario shows a VCR with Cab
77. tails All children Children 8 years and older General programming Parental Guidance Viewers 14 and older Adult programming General programming Not recommended for young children Not recommended for ages under 13 Not recommended for ages under 16 Programming restricted to adults sBulyjag y the TV is turned on again your Parent settings are reactivated 57 Using the Settings Using the Clock Timers Settings To Select the Clock Timers settings 1 Press 2 Select WEGA GATE Settings E 2 GATE To exit the Clock Timers settings press o Selecting Clock Timers Options To return to the Timer settings after programming one of the Timers or current time press 4 X Timer will be set to when Auto Program is executed Channel Fix is set the AC power cord is disconnected and then reconnected to turn the TV on and the Current Time is displayed as 58 Clock Timers SEJEN Sleep Off 1 15 min 3 Highlight 4 Press O Timer 2 30 min Current Time 45 min Clock Timers to select e 60 min 90 min Ey 22 B Select Set Exit WEGA The Clock Timers settings includes the following options To highlight an option and to change settings press 4 Press to confirm the selection Option Description Slee
78. ted are US 14 PG 13 Ol Canada 14 13 ans TV 14 Select to set ratings manually US See page 56 for details Canada See page 57 for details Select to use USA ratings see page 56 Select to use Canadian ratings see page 57 For changing your password 55 Using the Settings US Models Selecting Custom Rating Options X The Content Based Ratings are linked to the level of the Age Based Rating For example a program with an Age Based Rating of TV PG V Violence rating may contain moderate violence while a TV 14 V Violence rating may contain more intense violence X To ensure maximum blocking capability set the Age Based Ratings X If you block unrated TV programs be aware that the following types of programs may be blocked programs broadcast from another country emergency broadcasts political programs sports news public service announcements religious programs and weather Viewing Blocked Programs 56 For US models the Custom Rating menu includes the following options For Canadian models see page 57 Option Description Movie Rating G PG PG 13 R All children and General Audience Parental Guidance suggested Parental Guidance for children under 13 Restricted viewing parental guidance is suggested for children under 17 NC 17 and X No one 17 or under allowed TV Rating Block programs by their rating TV Y7 c
79. the TV speakers and listen to the TV s sound only through your external audio receiver and speakers X Audio Out is available Audio Out Variable The TV s speakers are turned off but the audio only when the Speaker Easy control of output from your audio system can still be option is set to Off volume controlled by the TV s remote control adjustments Fixed The TV s speakers are turned off and the audio output of the TV is fixed Use your audio receiver s remote control to adjust the volume and other audio settings through your audio system 50 Using the Screen Settings To select the Screen settings 2 Select Settings R To exit the Screen settings press o 1 Press WEGA GATE 3 Highlight Screen e Selecting Screen Options To change from one Wide Mode option to another use WIDE on the remote control For Wide Zoom and Zoom modes you can adjust the vertical position of the picture For details see page 52 X Normal Full1 and Full2 are available for Wide Mode when PC input is selected 4 3 Default functions only when the TV receives 480i or 480p signals V If 4 3 Default option is set to anything but Off the Wide Mode setting changes only for the current channel When you change channels or inputs Wide Mode is automatically replaced with the 4 3 Default setting for 4 3 sources To retain the current Wide Mode setting as channels
80. tion provided on the package If the picture becomes dark after using the TV for a long period of time it may be necessary to clean the inside of the TV Consult qualified service personnel Overloading Do not overload wall outlets extension cords or convenience receptacles beyond their capacity since this can result in fire or electric shock Power Always turn the unit off when it is not being used When the unit is left unattended and unused for long periods of time unplug it from the wall outlet as a precaution against the possibility of an internal malfunction that could create a fire hazard Sound If a snapping or popping sound from the TV is continuous or frequent while the TV is operating unplug the TV and consult your dealer or service technician It is normal for some TV s to make occasional snapping or popping sounds particularly when being turned on or off AC Power Cord If you damage the AC power cord it may result in fire or electric shock not pinch bend or twist the cord excessively The core lines may be bared and cut and cause short circuit resulting in fire or electric shock Do not convert or damage the AC power cord Do not put anything heavy on the AC power cord Do not pull the AC power cord Keep the AC power cord away from heat sources Be sure to grasp the plug when disconnecting the AC power cord If the AC power cord is damaged stop using it and ask your dealer or Sony
81. uctions Quick Setup Guide Leaflet Installing the Wall Mount Bracket to the TV and warranty card See page 65 for the quantity of each supplied accessory Features Some of the features that you will enjoy with your new TV include WEGA GATE WEGA GATE is a new feature that allows you to easily navigate to the most convenient TV functions favorite channels TV channel list external input list or settings O CineMotion Provides an optimized display by automatically detecting film content and applying a reverse 3 2 pulldown process Moving pictures will appear clearer and more natural looking Wide Screen Mode Watch conventional 4 3 aspect ratio broadcasts in wide screen 16 9 mode Favorite Channels With the WEGA GATE function allows you to preview and select from 8 of your favorite channels Steady Sound Equalizes volume levels so there is consistent output between programs and commercials Component Video Input Offers the best video quality for DVD 480p and 4801 and digital set top box 10801 720p 480p and 4801 connections Parental Control V Chip technology allows parents to block unsuitable programming from younger viewers O HDMI High Definition Multimedia Interface Provides an uncompressed all digital audio video interface between this TV and any HDMI equipped audio video component such as a set top box DVD player and A V receiver HDMI supports enhanced or high definition video plus two chann
82. zed display by automatically detecting film content and applying a reverse 3 2 pulldown process Moving pictures will appear clearer and more natural looking Select On to enhance the black colors to give the picture strong contrast Select to reduce the noise level of connected equipment It is also effective on the signal from the VHF UHF jack Select from High Medium Low and Off Adjust to brighten or darken the backlight Using the Audio Settings To select the Audio settings 2 Select Settings 1 WEGA GATE 3 Highlight Audio ty 2 WEGA GATE To exit the Audio settings press fou Selecting Audio Options X To change from one Sound Mode option to another use SOUND on Option Description the remote control Sound Mode Dynamic Select to enhance treble and bass X Treble Bass and Customized Natural Flat setting Balance are adjustable sound listening Clear Voice Suitable for spoken dialogue when the Audio Out dens option is to Variable Pen X To change from one Effect option to another Treble use 8 on the remote Bass control er i Balance o change from one MTS option to another sweaty Sound use MTS SAP on the remote control Effect V MTS is not available when Video Component HDMI or PC input is selected MTS Enjoy stereo bilingual and mono programs Audio C RE E5 Sound Mode Dynamic Reset Natural 4 Press Treble Clear Voice B

Sony KLV S23A10 Flat Panel Television User Manual

Contents

Download Pdf Manuals

Related Search

Related Contents