Home

Sony 4-115-568-11(1) Flat Panel Television User Manual

1. BD DVD Input buttons TV white Numeric button tools DISPLAY options 2K 1 Hold down the input button of which you want to change the assignment Example Hold down DVD 60 2 Referring to the following table press the corresponding button for the category you want Example Press 3 Now you can use the DVD button to control the Blu ray Disc player Categories and the corresponding buttons for BD DVD and SAT Categories Press DVD player 1 command mode DVD1 DVD recorder 2 command mode DVD3 Blu ray disc player 3 command mode BD1 yb Blu ray disc recorder 4 command mode BD3 Euro Digital Satellite 7 Receiver a The default setting of the DVD button Sony DVD recorders are operated with a DVD1 or DVD3 setting For details refer to the operating instructions of the DVD recorders 5 The default setting of the BD button For details on the BD1 or BD3 setting refer to the operating instructions of the Blu ray Disc player or Blu ray Disc recorder The default setting of the SAT button Categories and the corresponding buttons for TV Categories Press Tv 5 TV 6 DThe default setting of the TV white button When this setting is selected the audio input of the TV is switched and the image from the TV tuner is displayed on the TV screen automatically by pressing the TV white button When this setting is selected the audio input
2. Returns to the original display when several seconds have elapsed 44s Using the Radio Data System RDS Models of area code CEL CEK only This receiver also allows you to use RDS Radio Data System which enables radio stations to send additional information along with the regular program signal You can display RDS information Notes e RDS is operable only for FM stations e Not all FM stations provide RDS service nor do they provide the same type of services If you are not familiar with the RDS services in your area check with your local radio stations for details Receiving RDS broadcasts Simply select a station on the FM band using automatic tuning page 41 or preset tuning page 42 When you tune in a station that provides RDS services the program service name appears on the display Note RDS may not work properly if the station you tuned to is not transmitting the RDS signal properly or if the signal strength is weak Displaying RDS information While receiving an RDS station press DISPLAY repeatedly Each time you press the button RDS information on the display changes cyclically as follows Program Service name Frequency Using BRAVIA Sync features What is BRAVIA Sync BRAVIA Sync is compatible with a Sony TV Blu ray Disc DVD Player AV amplifier etc that is equipped with the Control for HDMI function By connecting Sony components that are compatible
3. Lets you adjust the speaker levels while listening to the test tone from your listening position For details see 8 Adjusting the speaker levels TEST TONE page 27 E FL LVL Front left speaker level E CNT LVL Center speaker level E FR LVL Front right speaker level E SR LVL Surround right speaker level E SL LVL Surround left speaker level E SW LVL Subwoofer level Notes e CNT LVL does not appear when you set CNT N in the SP SETUP setting e SR LVL and SL LVL do not appear when you set SUR N in the SP SETUP setting Adjusting the tone TONE menu You can use the TONE menu to adjust the tonal quality bass treble level of the speakers Select TONE in the amplifier menus For details on adjusting the parameters see Navigating through menus page 31 and Overview of the menus page 32 TONE menu parameters E BASS Bass level E TREBLE Treble level 3708 suoneado 131dwy if Settings for the Custom Menu CUSTOM menu You can use the CUSTOM menu to make settings for the audio to suit your preference Select CUSTOM in the amplifier menus For details on adjusting the parameters see Navigating through menus page 31 and Overview of the menus page 32 CUSTOM menu parameters E DUAL Digital broadcast language selection Lets you select the language you want to listen to during digital broadcast This f
4. For details see Types of sound field available page 40 Types of sound field available Sound field Sound field Effect for Display A F D mode 2CH STEREO When multi channel surround formats are input the signals are 2CH ST downmixed to 2 channel A F D STANDARD Presents the sound as it was recorded encoded without adding A F D STD any surround effects However this receiver will generate a low frequency signal for output to the subwoofer when there is no LFE signals A F D MULTI Reproduce sound from any of the format to 2 or more A F D MULT speakers PRO LOGIC Performs Dolby Pro Logic decoding The source recorded in 2 DOLBY PL channel format is decoded into 4 1 channels PRO LOGIC II MOVIE Performs Dolby Pro Logic II Movie mode decoding This PLII MV setting is ideal for movies encoded in Dolby Surround In addition this mode can reproduce sound in 5 1 channel for watching videos of overdubbed or old movies PRO LOGIC II MUSIC Performs Dolby Pro Logic II Music mode decoding This PLII MS setting is ideal for normal stereo sources such as CDs Movie MOVIE D C S The system reproduces the sound characteristics of the Sony MV D C S Pictures Entertainment Cary Grant Theater cinema production studio This is a standard mode great for watching almost any type of movie Music SPORTS SPORTS Reproduces the feeling of sports broadcasting NEWS NEWS The systems provided
5. SET HDMI appears on the display 3 Press or to enter the menu 4 Press repeatedly to select CONTROL FOR HDMI CONTROL FOR HDMI scrolls across the display then CONTROL appears 5 Press or to enter the parameter 6 Press repeatedly to select CTRL ON Control for HDMI function is activated 7 Setthe Control for HDMI function of the connected component to on 8 Select the HDMI input BD DVD SAT of the receiver and TV to match the HDMI output of the connected component so that the image from the connected component is displayed For details on setting the TV and connected components refer to the operating instructions of the respective components 460 Notes e You cannot perform One Touch Play and System Audio Control during Control for HDMI Easy Setting operation e Before you do the Control for HDMI Easy Setting from the TV be sure to turn on the TV connected components and receiver e When you unplug the HDMI cable or change the connection perform the steps given in When your TV is compatible with the Control for HDMI Easy Setting function page 45 or When your TV is not compatible with the Control for HDMI Easy Setting function page 46 If the playback components cannot function after you have made the settings for Control for HDMI Easy Setting check the Control for HDMI setting on your TV e If the connected components do not support t
6. lt gt PI lt gt Press to skip the track Press to fast reverse or fast forward gt playback Play mode button II pause press again to resume normal playback E stop To control the component 1 Press one of the input buttons TV BD DVD or SAT to select the component you want to operate The component assigned to the selected input button becomes operable 2 Referring to the following table press the corresponding button for the operation 10 Press to turn on or off the Sony audio video components that the remote is assigned to operate page 60 Press 1 1 and 2 TV VO AV VO at the same time to turn off the receiver and all other components that the remote is assigned to operate SYSTEM STANDBY fq Ty uch AV I on standby 8 ENTER Po Numeric buttons number 5 Press to enter the selection Press to select channels and tracks directly To control the TV Press and hold 15 TV yellow button while pressing the buttons with a yellow dot or yellow printing to control the TV Remote Button Function 4 AUDIO Select the desired audio signal To change the screen format manually to suit the Screen mode broadcast 5 THEATRE on Press to sets the optimal picture settings automatically for watching movies when you connect a Sony TV which is compatible with the T
7. then press or 3 Press repeatedly until SLEEP appears then press or 4 Press repeatedly to select the preset time The minutes display the remaining time changes as follows SLP OFF gt SLP 10M SLP 20M t t SLP 90M gt SLP 80M SLP 30M 5 press 6 Press AMP MENU The AMP menu turns off Switching the audio input mode IN MODE You can select the audio input mode setting when you connect satellite tuner or set top box to both HDMI IN jack and optical digital input jack on the receiver and SAT input has been selected T Press AMP MENU SET HDMI appears on the display Press repeatedly to select CUSTOM Press or to enter the menu Press repeatedly to select IN MODE Press or to enter the parameter Press repeatedly to select the audio input mode you want J O C1 A W N Press AMP MENU The AMP menu turns off Audio input modes E AUTO Gives priority to HDMI audio signals if there are both digital HDMI and optical connections E OPT Specifies the digital audio signals input to the DIGITAL SAT OPT IN jack 51 GB suoijeiodo 134 0 Using an S AIR Product This receiver is compatible with the S AIR function page 62 which allows wireless sound transmission between S AIR products When you purchase the S AIR product you need to perform the following settings to establish the sound transmission A
8. LAN or Bluetooth the transmission of S AIR products or other wireless systems may be unstable In this case the transmission may be improved by changing the following RF CHNG setting e S AMPMENU AMP D e S MENU tools OPTIONS 6 Ae ei DISPLAY gt ae TVCH PRESET aes TUNING TUNING at calc Press AMP MENU S AIR Press or to enter the menu RF CHNG ar A ND Press G or to enter the parameter continued Press repeatedly to select Press repeatedly to select 57 GB suoijeiodo 19410 6 Press repeatedly to select the setting you want then press e RF AUTO Normally select this The system change RF CHNG to RF ON or RF OFF automatically e RF ON The system transmits sound by searching the better channel for transmitting e RF OFF The system transmits sound by fixing the channel for transmitting To exit the menu Press AMP MENU Notes e When the wireless transmitter is not inserted in the S AIR main unit you cannot set RF CHNG e In most cases you will not need to change this setting If RF CHNG is set to RF OFF transmission between the S AIR main unit and S AIR sub unit can be performed using one of the following channels S AIR ID A equivalent channel for IEEE 802 11b g channel 1 S AIR ID B equivalent channel for IEEE 80
9. VIDEO 1 or VIDEO 2 You can also use INPUT SELECTOR on the receiver to select VIDEO 1 or VIDEO 2 30 4 Change the TV input For details refer to the operating instructions of the TV 5 Play back the tape on the VCR Enjoying a Super Audio CD CD 1 Turn on the Super Audio CD player CD player then place the disc on the tray 2 Turn on the receiver 3 Press SA CD CD You can also use INPUT SELECTOR on the receiver to select SA CD CD 4 Adjust the volume Enjoying a connected component through DMPORT connection T Press DMPORT You can also use INPUT SELECTOR on the receiver to select DMPORT 2 start playback of the connected component Tip When listening to MP3 or other compressed music using a portable audio source you can enhance the sound Press SOUND FIELD repeatedly to select P AUDIO page 40 Amplifier Operations Navigating through menus By using the amplifier menus you can make various adjustments to customize the receiver AMP MENU e Sh RETURN EXIT MENU HOME T Press AMP MENU SET HDMI appears on the display Press repeatedly to select the menu you want Press or to enter the menu OO N Press repeatedly to select the parameter you want to adjust ol Press G or to enter the parameter 6 Press repeatedly to select the setting you want 7 Press or to enter the
10. can also use INPUT SELECTOR on the receiver 2 Press TUNING or TUNING Press TUNING to scan from low to high press TUNING to scan from high to low The receiver stops scanning whenever a station is received To stop the automatic tuning manually press TUNING or If an FM program is noisy If an FM program is noisy you can select monaural reception There will be no stereo effect but reception will improve T Press MENU HOME 2 Press repeatedly until FM MODE appears then press or 3 Press repeatedly to select MONO e STEREO stereo reception e MONO monaural reception The default setting is STEREO 4 Press G 5 Press MENU HOME Tip To improve reception reorient the supplied antennas aerials 42 Presetting radio stations You can preset up to 20 FM stations and 10 AM stations Then you can easily tune in the stations you often listen to Presetting radio stations TUNER Numeric buttons DISPLAY Too Disitay OPTIONS 6 CAN E MENU t4 e gt EP HOME RETURNEXT MENUIHOME PRESET E iar af Ka Ca rr TUNING 1 Press TUNER repeatedly to select the FM or AM band You can also use INPUT SELECTOR on the receiver 2 Press and hold TUNING or TUNING until the auto scanning starts Scanning stops when the receiver tunes in a station ST for stereo program light up in the display Press ME
11. of the TV is switched automatically by pressing the TV white button To clear all remote button assignments Press and hold A then press VW and DMPORT at the same time The remote is reset to its factory settings Additional Information Glossary Digital Cinema Sound DCS A unique sound reproduction technology for home theater developed by Sony in cooperation with Sony Pictures Entertainment for enjoying the exciting and powerful sound of movie theaters at home With this Digital Cinema Sound developed by integrating a DSP Digital Signal Processor and measured data the ideal sound field intended by filmmakers can be experienced at home E Dolby Digital Digital audio encoding decoding technology developed by Dolby Laboratories Inc It consists of front Left Right center surround Left Right and subwoofer channels It is a designated audio standard for DVD video and also known as 5 1 channel surround Since surround information is recorded and reproduced in stereo more realistic sound with fuller presence is delivered than with Dolby surround E Dolby Pro Logic Il This technology converts 2 channel stereo recorded audio into 5 1 channel for playback There is a MOVIE mode for movies and MUSIC mode for stereo sources such as music Old movies encoded in the traditional stereo format can be enhanced with 5 1 channel surround sound E Dolby Surround Dolby Pro Logic Audio processing technology d
12. playback page 28 29 30 42 682 Indicators on the display ae be zog ji Lio ST MONO 11 10 9 Name Function Name Function ights up when the disc bein ights up when a playbac 1 LFE Lights up when the disc being 6 HDMI Lights up wh playback played back contains an LFE component is connected to this Low Frequency Effect channel receiver using an HDMI jack and the LFE channel signal is page 19 actually being reproduced 7 Preset Lights up when using the receiver 2 SLEEP Lights up when the sleep timer is station to tune in radio stations you have activated page 51 indicators preset For details on presetting 3 Playback The letters L C R etc indicate radio stations see page 42 channel the channels being played back 8 Tuner Lights up when using the receiver indicators The boxes around the letters vary indicators to tune in radio stations page 41 to show how the receiver etc downmixes she ube sound 9 COAX Lights up when the source signal L Front Left is a digital signal being i R Front Right 1s a digital signa eing input 8 through the COAX IN jack Cc Center monaural SL Surround Left 10 OPT Lights up when the source signal SR Surround Right is a digital signal being input S Surround monaural or the through the OPT IN jack surround c
13. setting To return to the previous display Press To exit the menu Press AMP MENU 31 GB suo eado sayiduy ff Overview of the menus The following options are available in each menu For details on navigating through menus see page 31 Menu Parameters Settings Initial setting Display Display HDMI settings Control for HDMI CTRL ON CTRL OFF CTRL ON SET HDMI CONTROL FOR HDMI pagea Volume limit MAX 39 1 MIN MAX VOL LIM Power save SAVE ON SAVE OFF SAVE ON P SAVE Auto Calibration Auto calibration start For details see Performing Auto settings START Calibration page 24 eas Clear Auto Calibration result YES NO NO pag A CAL CLR Speaker settings Center speaker CNT Y CNT N CNT Y SP SETUP CNT SP page 36 Surround speakers SUR Y SUR N SUR Y SUR SP Front left speaker distance FL 0 00 m to FL 7 00 m FL 3 00 m FL DIST 0 10 m step Center speaker distance CNT 0 00 m to CNT 7 00 m CNT 3 00 m CNT DIST 0 10 m step Front right speaker distance FR 0 00 m to FR 7 00 m FR 3 00 m FR DIST 0 10 m step Surround right speaker SR 0 00 m to SR 7 00 m SR 3 00 m distance 0 10 m step SR DIST Surround left speaker SL 0 00 m to SL 7 00 m SL 3 00 m distance 0 10 m step SL DIST Subwoofer distance SW 0 00 m to SW 7 00 m SW 3 00 m SW DIST 0 10 m step 3268 M
14. that the optimizer microphone remains at the same height as your ears Tip When you face the speaker towards the optimizer microphone you will get a more accurate measurement 2408 Performing Auto Calibration VV switch Input buttons S AMP MENU MEI AMP m o GE MENU DISPLAY Orvis ok P o Manel 2 HOV E p O20 0 RETURNEXIT MENU HOM T Press AMP MENU 2 Press repeatedly to select A CAL 3 Press or to enter the menu START appears on the display 4 Press to start the measurement Measurement starts in 5 seconds While the time is counting down stand away from the measurement area to avoid measurement error The measurement process will take approximately 30 seconds to complete The table below shows the display when measurement starts Measurement for Display Speaker existance TONE Speaker gain distance T S P frequency response Subwoofer gain and distance WOOFER Notes e If PHONES appears you cannot perform the Auto Calibration Disconnect the headphones from the S AIR product you are using then restart the Auto Calibration If CHK MIC appears you cannot perform the Auto Calibration Connect the calibration mic then restart the Auto Calibration Tips e When Auto Calibration starts Stand some distance from the speakers and the listening position to avoid measurement failure This is bec
15. the clearer sound for the voice program such as news PORTABLE AUDIO Reproduces a clear enhanced sound image from your portable ENHANCER audio device This mode is ideal for MP3 and other P AUDIO compressed music Others HEADPHONE 2CH Output the sound from headphone left and right Multi channel HP 2CH surround formats are downmixed to 2 channels HEADPHONE THEATER Output the sound as surround from headphone left and right HP THEA dD C S technology is used For details see Glossary page 61 This decoding mode appears when you connect the headphones to surround amplifier S Air sub unit not supplied 40 Notes e The effects provided by the virtual speakers may cause increased noise in the playback signal e When listening with sound fields that employ the virtual speakers you will not be able to hear any sound coming directly from the surround speakers e This function does not work when signals with a sampling frequency of more than 48 kHz is input the multi channel Linear PCM signals are received via an HDMI IN jack The sound is not output from multiple speakers depending on the source e Depending on the disc or source the beginning of the sound may be cut off as the optimum mode is automatically selected To avoid cutting the sound select A F D STD e When the input signal is multi channel source Dolby Pro Logic N MOVIE MUSIC are canceled and the multi channel source is o
16. to CTRL ON and P SAVE is set to SAVE ON page 35 When S AIR standby STBY is set to STBY OFF page 59 3 Input buttons Press one of the buttons to select the component you want to use The buttons are factory assigned to control Sony components You can change the button assignments following the steps in Changing the input button assignments on page 60 SOUND FIELD Press to select a sound field 7 9 AMP MENU Press to display the menu of the receiver fii aX Press to turn off the sound Muting temporarily Press 0X again to restore the sound 12 lt Press to adjust the volume 7 Press or to select the settings Then press 4 e gt to enter the selection continued 9 GB Tuner operations Remote Button Function Common operations Remote Button Function 8 ENTER i3 MENU HOME i4 PRESET Press to enter the selection Press to display the menu Press to select a preset station TUNING Press to scan the station 7 Press to select the menu items and to enter the 4 4 4 gt selection i8 DISPLAY Press to display information during TUNER function fig CLEAR Press to clear a mistake when you input a wrong character DMPORT operations Remote Button Function 14
17. unit 160 mm cone type Bass reflex 1 5 ohms Dimensions w h d Approx 220 x 395 x 325 mm with foot Mass Approx 5 6 kg Enclosure type Rated Impedance HT SS360 only e Front speaker SS MSP36S e Surround speaker SS SRP36S e Center speaker SS CNP36 Front Surround speaker Full range Center speaker Full range Magnetically shielded Speaker unit Front Surround speaker 65 mm cone type Center speaker 30 x 60 mm cone type Enclosure type Front Surround speaker Bass reflex Center speaker Acoustic suspension Rated Impedance 3 ohms Dimension w h d Approx Front Surround speaker 102 x 163 x 77 mm with foot 380 x 50 x 64 mm with foot Center speaker Mass Approx Front speaker 0 52 kg Surround speaker 0 48 kg Center speaker 0 38 kg e Subwoofer SS WP36 Speaker unit 160 mm cone type Bass reflex 1 5 ohms Dimensions w h d Approx 220 x 395 x 325 mm with foot Mass Approx 5 6 kg Enclosure type Rated Impedance Supplied speakers Front speaker 2 Center speaker 1 Surround speaker 2 Subwoofer 1 Supplied accessories Operating Instructions this manual Quick Setup Guide 1 Speaker Stand Installation Guide HT SF360 only 1 FM wire antenna 1 AM loop antenna 1 Remote commander e RM AAU058 1 R6 size AA batteries 2 Optimizer microphone ECM AC2 1 Speaker cords 5 Foot pads e Speakers HT SS360 only 20 HT SF360 only 4 e Subwoofer 4 Sc
18. want then press G e STBY OFF You cannot enjoy the S AIR receiver while the S AIR main unit is in standby mode e STBY ON You can enjoy the S AIR receiver while the S AIR main unit is in standby mode or turned on To exit the menu Press AMP MENU Notes e When you set STBY to STBY ON the power consumption increases during the standby mode e When the wireless transmitter is not inserted in the S AIR main unit you cannot set STB Y e When the wireless transmitter is removed from the S AIR main unit STBY is set to STBY OFF automatically e When you turn the system off while STBY is set to STBY ON you cannot use any buttons other than IC button e The sound of the S AIR receiver may be cut off by operation of the S AIR main unit 5968 suoijesodoO 134 0 Using the Remote Changing the input button assignments You can change the factory settings of the input buttons to suit the components in your system For example if you connect a Blu ray Disc player to the DVD jack on the receiver you can set the DVD button on this remote to control the Blu ray Disc player You cannot assign any component other than a TV to the TV white button of the remote Notes e You can change the remote assignments for BD DVD and SAT input buttons e When the receiver is in VIDEO1 VIDEO2 or SA CD CD mode you cannot operate the selected component VW D M PO RT kitz STANDBY
19. with the BRAVIA Sync with an HDMI cable not supplied operation is simplified as follows e One Touch Play When you play back a component such as a DVD Blu ray disc player the receiver and the TV are turned on automatically and switched to the appropriate HDMI input Be sure that the System Audio Control setting is set to on System Audio Control While watching TV you can select to output the sound from the TV speaker or the speakers connected to the receiver System Power Off When you turn off the TV the receiver and connected components are also turned off simultaneously Control for HDMI is a mutual control function standard used by HDMI CEC Consumer Electronics Control for HDMI High Definition Multimedia Interface The Control for HDMI function does not work in the following cases e When you connect the receiver to a component which does not correspond with Sony s Control for HDMI function e When you connect the receiver and components using other than HDMI connection We recommend that you connect the receiver to products featuring BRAVIA Sync Note Depending on the connected component the Control for HDMI function may not work Refer to the operating instructions of the component Preparing for the BRAVIA Sync To use the BRAVIA Sync set the Control for HDMI function to on for both the receiver and the connected component The receiver is compatible with the Control fo
20. 2 11b g channel 6 S AIR ID C equivalent channel for IEEE 802 1 1b g channel 11 e The transmission may be improved by changing the transmission channel frequency of the other wireless system s For details refer to the operating instructions of the other wireless system s 58 ce Changing the RF output power For EZW T100A wireless transceiver only T Press AMP MENU Press repeatedly to select S AIR menu 2 3 Press or to enter the 4 Press repeatedly until RF POWER appears in the front panel display then press or gt D Press 4 4 to select the desired setting e HIGH Normally select this e LOW The RF output power is decreased 6 Press The setting is made T Press AMP MENU The receiver menu turns off Enjoying the S AIR receiver while the S AIR main unit is in standby mode For the S AIR receiver only not supplied You can enjoy the S AIR receiver while the S AIR main unit is in standby mode by setting STBY to STBY ON G AMP MENU AMP amp MEN TOOLS OPTIONS IANN O eae 2100 gt RETURNIEXIT ee TCH PRESET ret we SOF Press AMP MENU Press repeatedly to select S AIR Press or to enter the menu Press repeatedly to select STBY Press or to enter the parameter oOo ac N Press repeatedly to select the setting you
21. AMP MENU Press repeatedly to select S AIR Press or to enter the menu Press repeatedly to select S AIR ID Press G or to enter the parameter oo act e RN Press repeatedly to select the desired ID A B or C then press G To exit the menu Press AMP MENU 5468 To set the ID of the S AIR sub unit For details on setting the ID of the surround amplifier and S AIR receiver refer to operating instructions supplied with the surround amplifier and S AIR receiver Sound transmission is established as follows example Other S AIR S AIR main unit main unit S AIR S AIR AIR sub unit sub unit sub unit Pairing the S AIR main unit with a specific S AIR sub unit Pairing operation To establish sound transmission you need to set the same ID for your S AIR main unit and S AIR sub unit However if your neighbors have S AIR products and their IDs are the same as yours your neighbors could receive the sound of your S AIR main unit or vice versa To prevent this you can pair the S AIR main unit with a specific S AIR sub unit by performing the pairing operation E Before pairing Sound transmission is established by the ID example Your room Neighbor S AIR main unit S AIR sub unit S AIR sub unit E After pairing Sound transmission is established between the paired S AIR main unit and S AIR sub unit s only Your room Neighbor S AIR
22. DC IDA S AIR S AIR ID page 52 PAIRING START CONDIN START PAIRING S AIR mode PARTY SEPARATE PARTY MODE RF Change RF AUTO RF ON RF OFF RF AUTO RF CHNG RF Power PWR HIGH PWR LOW PWR HIGH RF POWER S AIR standby STBY ON STBY OFF STBY OFF STBY a For details refer to the page in the parentheses 5 CONTROL FOR HDMI scroll across the display then CONTROL appears This parameter is only available when the result of the Auto Calibration is saved D When the Auto Calibration result is saved you can adjust the setting in 0 01 meter increment This parameter is only available when SAT input is selected This parameter is only available if the S AIR transmitter not supplied is inserted to the EZW T100 slot on the receiver 8 This parameter is only available when using the EZW T100A wireless transceiver for model of area code CEL CEK only 34s Settings for the HDMI SET HDMI menu You can use the SET HDMI menu to make various adjustments for HDMI settings Select SET HDMI in the amplifier menus For details on adjusting the parameters see Navigating through menus page 31 and Overview of the menus page 32 SET HDMI menu parameters E CONTROL FOR HDMI Control for HDMI Lets you turn the Control for HDMI function on or off For details see Preparing for the BRAVIA Sync page 45 E VOL LIM Volume limit Lets you set the volume
23. DRC STD is the standard setting but it only enacts light compression Therefore we recommend using the DRC MAX setting This greatly compresses the dynamic range and lets you view movies late at night at low volumes Unlike analog limiters the levels are predetermined and provide a very natural compression E DIMMER Brightness of the display Lets you adjust the brightness of the display For details see Changing the brightness of the display DIMMER page 50 E DISPLAY Display Lets you turn on and off the display For details see Changing the display setting DISPLAY page 50 E SLEEP Sleep timer Lets you set the timer to power off the receiver automatically For details see Using the Sleep Timer SLEEP page 51 E IN MODE Switching the audio input mode Lets you set the audio input mode of inputs For details see Switching the audio input mode IN MODE page 51 This parameter is only available when SAT input is selected Settings for the S AIR S AIR menu For details on S AIR see Using an S AIR Product page 52 3962 suoneado 131 dwy fi Enjoying Surround Sound Selecting the sound field This receiver can create multi channel surround sound You can select one of the optimized sound fields from the receiver s preprogrammed sound fields DoD ae D SOUND FIELD Press SOUND FIELD repeatedly to select the sound field you want
24. HEATRE button Also the audio is automatically switched to the audio output of this receiver when you connect the TV and the receiver with HDMI connection and the Control for HDMI function is set to on 6 amp Press to display the guide Guide when you are watching analog and digital channels Press to return to the previous channel watched for more than five seconds Ea Previous channel Remote Button Function Remote Button Function 10 TOOLS OPTIONS Press to enable you to access various viewing options and change make adjustments according to the source and screen format 29 J Input select Text hold In TV mode Press to select input In Analogue Text mode Press to hold the current page aX Press to turn off the sound Muting 12 a Press to adjust the volume ress to allow you to select 3 MENU HOME P llow y 1 channels or input sources and change the settings for your TV i4 TV CH In TV mode Press to select EDE the next or previous channel In Text mode Press to select the next D or previous E page 16 ban Return to the previous RETURN screen of any displayed EXIT menu 7 Press to select the menu item and enters the selection 4 4 gt 8 DISPLAY Press to display the TV s information on the TV screen Displays the current channel numbe
25. I appears on the display 2 Press repeatedly until LEVEL appears then press or 3 Press repeatedly until T TONE appears then press or 4 Press repeatedly to select T TONE Y then press G The test tone is output from each speaker in sequence as follows Front left gt Center Front right Surround right Surround left Subwoofer D Press until T TONE appears 6 Press repeatedly to select the desired speaker then press or The test tone is emitted from the speaker that is being adjusted only e FL LVL adjusts the front left speaker level e CNT LVL adjusts the center speaker level e FR LVL adjusts the front right speaker level e SR LVL adjusts the surround right speaker level e SL LVL adjusts the surround left speaker level e SW LVL adjusts the subwoofer level Notes e CNT LVL does not appear when you set CNT N in the SP SETUP setting e SR LVL and SL LVL do not appear when you set SUR N in the SP SETUP setting payeys Buryje5 7 Press repeatedly to adjust the speaker level then press or You can adjust from 6 0 dB to 6 0 dB in 0 5 dB steps Note If you do not adjust for a certain period the test tone is emitted from the next speaker in sequence 8 Repeat step 6 and 7 to adjust the other speaker level 9 After you have finished making adjustments pres
26. NU HOME oo 4 Press repeatedly until MEMORY appears in the display 5 press or A preset number appears in the display 6 Press repeatedly to select the preset number you want You can select the preset number directly by pressing the number buttons T Press G COMPLETE appears in the display and the station is stored 8 Press MENU HOME 9 Repeat 2 to 8 to store other stations To change the preset number Restart from step 3 Changing the AM tuning interval Except model of area code CEL CEK The AM tuning interval can be set to either 10 kHz or 9 kHz T Press TUNER BAND repeatedly until AM appears in the display 2 Press MENU HOME 3 Press repeatedly until AM STEP appears in the display then press G or OK STEP or 10K STEP appears in the display 4 Press G COMPLETE appears in the display The AM tuning interval is changed D Press MENU HOME Note If you change the interval AM preset stations will be erased Tuning to preset stations 1 Press TUNER repeatedly to select the FM or AM band 2 Press PRESET or PRESET repeatedly to select the preset station you want Each time you press the button the receiver tunes in one preset station You can also press the numeric buttons to select the preset station you want Then press ENTER to enter the selection Naming preset station You can enter a name for pre
27. S O NY 4 130 031 11 3 Home Theatre system Operating Instructions HT SF360 HT SS360 2009 Sony Corporation To reduce the risk of fire or electric shock do not expose this apparatus to rain or moisture To reduce the risk of fire do not cover the ventilation opening of the apparatus with newspapers tablecloths curtain etc Do not place the naked flame sources such as lighted candles on the apparatus To reduce the risk of fire or electric shock do not expose this apparatus to dripping or splashing and do not place objects filled with liquids such as vases on the apparatus Do not install the appliance in a confined space such as a bookcase or built in cabinet As the main plug is used to disconnect the unit from the mains connect the unit to an easily accessible AC outlet Should you notice an abnormality in the unit disconnect the main plug from the AC outlet immediately Do not expose batteries or apparatus with battery installed to excessive heat such as sunshine fire or the like The unit is not disconnected from the mains as long as it is connected to the AC outlet even if the unit itself has been turned off To prevent injury this apparatus must be securely attached to the floor wall in accordance with the installation instructions For models of area code SP TH only This symbol is intended to alert the user to the presence of the Hot Surface that may be hot if it is touched during
28. TAL MEDIA PORT DC OUT 5 V 700 mA MAX uopewnoju jeuonippy Power consumption Reference power output for front center surround speakers and subwoofer Depending on the sound field settings and the source there may be no sound output Area code Power consumption CEL CEK AU TW 165 W TH SP 140 W continued 6962 Power consumption during standby mode 0 3 W When Control for HDMI and S AIR standby are off Dimensions w h d Approx 430 x 66 5 x 333 mm including projecting parts and controls Mass Approx 3 4 kg Speaker section HT SF360 only e Front speaker SS MSP36F e Surround speaker SS SRP36F e Center speaker SS CNP36 Front Surround speaker Full range Center speaker Full range Magnetically shielded Speaker unit Front Surround speaker 65 mm cone type Center speaker 30 x 60 mm cone type Enclosure type Front Surround speaker Bass reflex Center speaker Acoustic suspension Rated Impedance 3 ohms Dimension w h d Approx 113 x 830 x 83 mm without stand 315 x 1 015 1 345 x 315 mm with stand 108 x 540 x 78 mm without stand 290 x 1 045 1 235 x 290 mm with stand 380 x 50 x 64 mm with foot Front speaker Surround speaker Center speaker Mass Approx Front speaker 1 6 kg without stand 3 3 kg with stand 1 1 kg without stand 2 6 kg with stand 0 38 kg Surround speaker Center speaker 70 e Subwoofer SS WP36 Speaker
29. TV 2 Turn the satellite tuner and the receiver on 3 Press SAT You can also use INPUT SELECTOR on the receiver to select SAT 4 Change the TV input For details refer to the operating instructions of the TV 5 Adjust the volume of the receiver Tip The sound may be output from the TV s speaker In this case turn the volume of the TV s speaker down to the minimum 29 GB yoeqhe d Enjoying Blu ray Disc or DVD 1 Turn on the TV 2 Turn on the Blu ray Disc or DVD player recorder and the receiver 3 Press DVD or BD You can also use INPUT SELECTOR on the receiver to select DVD or BD Be sure to change the factory setting of the DVD input button on the remote so that you can use the button to control your DVD player For details see Changing the input button assignments page 60 4 Change the TV input For details refer to the operating instructions of the TV 5 Play back the disc 6 Adjust the volume Tip Even if you playback Dolby True HD Dolby Digital Plus or DTS HD with a connected component compatible with these sound formats the receiver accepts as Dolby Digital or DTS When you connect the component to the receiver using an HDMI cable to playback these high quality sound formats set the connected component to output the sound in multi channel PCM if possible Enjoying a VCR 1 Turn on the TV 2 Turn the VCR player and the receiver on 3 Press
30. also need to pair between the S AIR main unit and the S AIR receiver For details see Pairing the S AIR main unit with a specific S AIR sub unit Pairing operation page 54 Press AMP MENU Press repeatedly to select S AIR Press or to enter the menu Press repeatedly to select MODE Press G or to enter the parameter 7 Press repeatedly to select the setting you want e PARTY The S AIR sub unit outputs sound according to function set on the S AIR main unit e SEPARATE You can select the input you want for the S AIR receiver while the input of the S AIR main unit remain unchanged When SEPARATE is set the functions you can select are MAIN UNIT SACD CD TUNER FM TUNER AM and DMPORT To enjoy the same function as the S AIR main unit select MAIN UNIT 8 Select the desired function on the S AIR product When the sound is other than 2 channel stereo multi channel sound is down mixed to 2 channel 9 Adjust the volume on the S AIR receiver Notes e When the sound is other than 2 channel stereo multi channel sound is downmixed to 2 channel When TUNER FM or TUNER AM is selected on the receiver you can only select the same band for the tuner on the S AIR product Changing the channel for better sound transmission If you use multiple wireless systems which sharing the 2 4 GHz band such as wireless
31. anceled automatically and the INCOMP display appears To cancel pairing Reset the ID of the S AIR main unit For details see To set the ID of the S AIR main unit page 54 You can set the same ID as before Enjoying the system s sound in another room For the S AIR receiver only not supplied You can enjoy the system s sound in another room by using the S AIR receiver The S AIR receiver can be placed in another room for enjoying the system s sound there For details of the S AIR receiver refer to the operating instructions supplied with S AIR receiver Note Sources with copyright protection may not be playable on S AIR products ae So S AMPMENU AMP e S MENU TooLs pispLay options UK LO S RETURNIEX MENU HOME TVCH TV CH PRESET PRESET TUNING Qo oe 5668 ao al A OON Set the ID of the S AIR receiver to match the S AIR main unit e To set the ID of the S AIR main unit see To set the ID of the S AIR main unit page 54 To set the ID of the S AIR receiver refer to the operating instructions supplied with S AIR receiver Notes e When you are using another S AIR sub unit such as a surround amplifier do not change the ID of the S AIR main unit Set the ID of the S AIR receiver to the match the ID of the S AIR main unit e When you pair the S AIR main unit and another S AIR sub unit such as a surround amplifier you
32. as a sampling frequency of 44 1 kHz Generally speaking a higher sampling frequency means better sound quality 6268 E S AIR Sony Audio Interactive Radio frequency Recent times have seen the rapid spread of DVD media Digital Broadcasting and other high quality media To ensure that the subtle nuances of these high quality media are transmitted with no deterioration Sony has developed a technology called S AIR for the radio transmission of digital audio signals with no compression and has incorporated this technology into the EZW T100 This technology transfers digital audio signals with no compression using the 2 4 GHz band range of ISM band Industrial Scientific and Medical band such as wireless LANs and Bluetooth applications E S master S master is an all digital amplifier technology developed by Sony which effectively minimizes the occurrence of sound fragmentation and jitter delivering superb dialog clarity and faithful reproduction of the original sound The compact amplifier section supports a higher power efficiency and improved thermal performance E TSP Time Stretched Pulse A TSP signal is a highly precise measuring signal that utilizes impulse energy measuring a wide band from low to high in a short period The amount of energy used to measure signals is important to ensure measurement accuracy in a normal indoor environment Using TSP signals makes it possible to measure signals effectivel
33. ate input automatically TV sound is output from the speakers connected to the receiver and the volume of fay the TV is minimized simultaneously You can use the System Audio Control function as follows If you turn on the receiver while the TV is turned on the System Audio Control function will automatically be set to on and the TV sound will output from the speakers connected to the receiver However if you turn off the receiver the sound will output from the TV speakers You can adjust the receiver s volume when you adjust the TV volume Notes e If System Audio Control does not function according to your TV setting refer to the operating instructions supplied with the TV e When you connect a TV that does not have System Audio Control function the System Audio Control function does not work e If the TV is turned on before turning on the receiver the TV sound will not be output for a moment 47 soinjeay ouAS WIAWHG BuIsn Using the Volume Limit function When the System Audio Control function is active and the output method changes from the TV speaker to the speakers connected to the receiver automatically loud sound may be output depending on the volume level of the receiver You can prevent this by limiting the maximum volume level T Press AMP MENU 2 Press repeatedly until SET HDMI appears then press or gt 3 Press repeatedly until VOL LIM appears then press o
34. ause test signals are output from the speakers during measurement Avoid making noise to get a more accurate measurement The Auto Calibration function will be canceled when you do the following during the measurement process Press VO or aX Press input buttons on the remote or INPUT SELECTOR on the receiver Change the volume level Confirming saving the measurement results 1 Confirm the measurement result When the measurement ends a beep sounds and the measurement result appears on the display Measurement Display Explanation result When the SAVE Proceed to step measurement 2 process completes properly When the ERROR See When measurement XXXX error codes process fails appear page 25 2 Press repeatedly to select the item Then press ee Item Explanation D r r SAVE Saves the measurement 5 results and exits the setting Q process o o WRN CHK Displays warning Pi concerning the a measurement results See When you select WRN CHK page 26 DIST Displays the measurement result for speaker distance LEVEL Displays the measurement result for speaker level EXIT Exits the setting process without saving the measurement results Note After SAVE is displayed for 50 seconds the measurement result is saved automatically without the need to save the procedure 3 Save the measurement result Selec
35. ayer etc The COAX IN jack ee ZIN provides a better Jac sound quality page 20 Y HDMI IN Connects to a DVD OUT jacks player satellite tuner or a Blu ray disc player The image is output to a TV or a projector while the sound can be output from a TV or and speakers connected to this receiver page 19 52 3 DMPORT v DMPORT Connects toa C3 jack DIGITAL MEDIA PORT adapter page 18 7 ANTENNA section 4 AUTO CALIBRATION section AUTO CAL Connects to the MIC jack supplied optimizer microphone for the Auto Calibration function page 24 FM Connects to the ANTENNA supplied FM wire jack antenna page 21 AM Connects to the ANTENNA supplied AM loop terminals antenna page 21 5 AUDIO INPUT section AUDIO IN Connects to a Super White L jacks Audio CD player CD player etc Red R page 18 20 882 Basic operations Remote commander Remote Button Function You catuse the supplied remote 2 vd Press to turn the receiver on RM AAU058 to operate the receiver and to on standby or off control the Sony audio video components that To turn off all Sony the remote is assigned to operate page 60 components press I and AV 1 1 at the same time SYSTEM RM AAU058 STANDBY Saving the power in standby mode When CONTROL FOR HDMI is set
36. bout S AIR products There are two types of S AIR product e S AIR main unit this receiver The S AIR main unit is for transmitting sound You can use up to 3 S AIR main units The number of usable S AIR main unit depends on the use environment S AIR sub unit not supplied The S AIR sub unit is for receiving sound Surround amplifier You can enjoy surround speaker sound wirelessly S AIR receiver You can enjoy system sound in another room These S AIR products can be purchased as an option the S AIR products lineup differs depending on the area Notes or instruction from the surround amplifier or S AIR receiver in this operating instructions is refer only when the surround amplifier or S AIR receiver is used 5268 S AIR sub unit S AIR receiver S AIR main unit this receiver S AIR sub unit surround amplifier Inserting the wireless transmitter transceiver To make use of the S AIR function you need to insert the wireless transmitter not supplied into the S AIR main unit and the wireless transceiver not supplied into the S AIR sub unit Notes e Before inserting the wireless transmitter transceiver be sure to disconnect the AC power cord mains lead e Do not touch the terminals of the wireless transmitter transceiver To insert the wireless transmitter into the S AIR main unit 1 Remove the screws and detach the slot co
37. bwoofer Installing the speakers on the speaker stand For greater flexibility in positioning the speakers you are recommended to use the speaker stand below Model Speaker Stand HT SF360 Supplied For details refer to the supplied speaker stand installation guide HT SS360 Optional WS FV11 or WS FV10D speaker stand available only in certain countries For details refer to the operating instructions supplied with the speaker stand 14 Installing the speakers on the wall You can install your speakers on the wall 1 Prepare screws not supplied that are suitable for the hook on the back of each speaker See the illustrations below pns Amm y more than 25 mm 4 6 mm re oan Hook on the back of the speaker 2 Fasten the screws to the wall The screws should protrude 5 to 7mm For the center speaker ee z S 5mmto7mm Ni J For the front speakers of HT SF360 Y 5mm to 7mm J For the surround speakers of HT SF360 5mm to 7mm For the front and surround speakers of HT SS360 T 5 mm to 7 mm 3 Hang the speakers on the screws Rear of speaker Notes e Use screws that are suitable for the wall material and strength As a plaster board wall is especially fragile attach the screws securely to a beam and fasten them to the wall Install the speakers on a vertical and flat wall where reinforcement is applied e Contact a screw shop or installer regard
38. cal symbol The chemical symbols for mercury Hg or lead Pb are added if the battery contains more than 0 0005 mercury or 0 004 lead By ensuring these batteries are disposed of correctly you will help prevent potentially negative consequences for the environment and human health which could otherwise be caused by inappropriate waste handling of the battery The recycling of the materials will help to conserve natural resources In case of products that for safety performance or data integrity reasons require a permanent connection with an incorporated battery this battery should be replaced by qualified service staff only To ensure that the battery will be treated properly hand over the product at end of life to the applicable collection point for the recycling of electrical and electronic equipment For all other batteries please view the section on how to remove the battery from the product safely Hand the battery over to the applicable collection point for the recycling of waste batteries For more detailed information about recycling of this product or battery please contact your local Civic Office your household waste disposal service or the shop where you purchased the product Notice for customers The following information is only applicable to equipment sold in the countries applying EU Directives The manufacturer of this product is Sony Corporation 1 7 1 Konan Minato ku Tokyo 108 0075 Japan The Authorized Represe
39. ct the surround speakers E FL DIST Front left speaker distance E FR DIST Front right speaker distance Lets you set the distance from your listening position to the front speaker If both front speakers are not placed an equal distance from your listening position set the distance to the closest speaker CNT DIST Center speaker distance Lets you set the distance from your listening position to the center speaker 36 E SR DIST Surround right speaker distance E SL DIST Surround left speaker distance Lets you set the distance from your listening position to the surround speakers E SW DIST Subwoofer distance Lets you set the distance from your listening position to the subwoofer Notes e CNT DIST does not appear when you set CNT N in the SP SETUP setting e SR DIST and SL DIST do not appear when you set SUR N in the SP SETUP setting Tip When the Auto Calibration result is saved you can adjust the speakers distance in 1 cm steps If the Auto Calibration result is not saved you can adjust the speakers distance in 10 cm steps Adjusting the level LEVEL menu You can use the LEVEL menu to adjust the level of each speaker Select LEVEL in the amplifier menus For details on adjusting the parameters see Navigating through menus page 31 and Overview of the menus page 32 LEVEL menu parameters E T TONE Test tone
40. e AA only 4 amp 8 On Copyrights This receiver incorporates Dolby Digital and Pro Logic Surround and the DTS Digital Surround System Manufactured under license from Dolby Laboratories Dolby Pro Logic and the double D symbol are trademarks of Dolby Laboratories Manufactured under license under U S Patent s 5 451 942 5 956 674 5 974 380 5 978 762 6 487 535 amp other U S and worldwide patents issued amp pending DTS and DTS Digital Surround are registered trademarks and the DTS logos and Symbol are trademarks of DTS Inc 1996 2008 DTS Inc All Rights Reserved This receiver incorporates High Definition Multimedia Interface HDMI technology HDMI the HDMI logo and High Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC x v Colour and x v Colour logo are trademarks of Sony Corporation BRAVIA is a trademarks of Sony Corporation S AIR and its logo are trademarks of Sony Corporation Table of Contents Description and location of parts 6 Getting Started 1 Installing the speakers 13 2 Connecting the speakers ce 15 3 Connecting the TV oo eee 16 4 Connecting the audio video components 17 5 Connecting the antennas 21 6 Preparing the receiver and the remote 22 7 Calibrating the appropriate settings automatically AUTO CALIBRATION eee 23 8 Adju
41. eature only functions for Dolby Digital sources e MAIN Main Sound of the main language will be output e SUB Sub Sound of the sub language will be output MAIN SUB Main Sub Sound of the main language will be output through the front left speaker and sound of the sub language will be output through the front right speaker simultaneously E A V SYNC Synchronizes audio with video output Lets you delay the audio output so that the time gap between the audio output and visual display is minimized You can adjust from OFF 1 10 ms to 20 200 ms in 1 10 ms steps Notes e You may not be able to adjust the delay between sound and image perfectly using this function e This function is useful only for Dolby Digital DTS and Linear PCM 2ch input by optical and coaxial audio input signals 3868 E AUD DRC Audio dynamic range compression Lets you compress the dynamic range of the sound track This may be useful when you want to watch movies at low volumes late at night Audio dynamic range compression is possible with Dolby Digital sources only e DRC OFF The audio dynamic range is not compressed e DRC STD The audio dynamic range is compressed as intended by the recording engineer e DRC MAX The audio dynamic range is compressed dramatically Tip Audio dynamic range compression lets you compress the dynamic range of the soundtrack based on the dynamic range information included in the Dolby Digital signal
42. ect polarity when installing batteries Notes e Do not leave the remote in an extremely hot or humid place e Do not use a new battery with old ones e Donot mix manganese batteries and other kinds of batteries e Do not expose the remote sensor to direct sunlight or lighting apparatuses Doing so may cause a malfunction e If you do not intend to use the remote for an extended period of time remove the batteries to avoid possible damage from battery leakage and corrosion When you replace the batteries the remote buttons may be reset to their factory settings If this happens reassign the buttons again page 60 e When the remote no longer operates the receiver replace all the batteries with new ones 7 Calibrating the appropriate settings automatically AUTO CALIBRATION This receiver is equipped with DCAC Digital Cinema Auto Calibration Technology which allows you to perform automatic calibration as follows e Check the connection between each speaker and the receiver e Adjust the speaker level e Measure the distance of each speaker from your listening position e Measure the frequency characteristics The measurement result is not utilized for signals with a sampling frequency of more than 96 kHz The DCAC is designed to obtain proper sound balance in your room However you can adjust the speaker levels manually according to your preference For details see 8 Adjusting the speaker l
43. enu Parameters Settings Initial setting Display Display Level settings Test tone T TONEN T TONE Y T TONE N LEVEL T TONE page 37 Front left speaker level FL 6 dB to FL 6 dB FL 0 0 dB FL LVL 0 5 dB step Center speaker level CNT 6 dB to CNT 6 dB CNT 0 0 dB CNT LVL 0 5 dB step Front right speaker level FR 6 dB to FR 6 dB FR 0 0 dB FR LVL 0 5 dB step Surround right speaker level SR 6 dB to SR 6 dB SR 0 0 dB SR LVL 0 5 dB step Surround left speaker level SL 6 dB to SL 6 dB SL 0 0 dB SL LVL 0 5 dB step Subwoofer level SW 6 dB to SW 6 dB SW 0 0 dB SW LVL 0 5 dB step Tone settings Bass level BASS 6 dB to BASS 6 dB BASS 0 0 dB TONE BASS 0 5 dB step page 37 Treble level TRE 6 dB to TRE 6 dB TRE 0 0 dB TREBLE 0 5 dB step Custom settings Digital broadcast language MAIN SUB MAIN SUB MAIN CUSTOM selection page 38 DUAL Synchronizes audio with SYNC OFF SYNC 1 to SYNC 20 SYNC OFF video output A V SYNC Audio Dynamics range DRC OFF DRC STD DRC MAX DRC OFF compression AUD DRC Brightness of the display DIMMER Y DIMMER N DIMMER N DIMMER Display DSPL ON DSPL OFF DSPL ON DISPLAY Sleep timer SLP OFF SLP 10M SLP 20M SLP OFF SLEEP SLP 90M Switching the audio input AUTO OPT AUTO mode IN MODE continued 33 GB suoneado 131dwy g Menu Parameters Settings Initial setting Display Display S AIR settings S AIR ID IDA IDB I
44. eveloped by Dolby Laboratories Inc Center and mono surround information is matrixed into two stereo channels When reproduced audio is decoded and output in 4 channel surround sound This is the most common audio processing method for DVD video continued 61 GB uOHeWOU jeuonippy a0way oy Buisn il E DTS Digital Surround Digital audio encoding decoding technology for theaters developed by DTS Inc It compresses audio less than Dolby Digital delivering a higher quality sound reproduction E HDMI High Definition Multimedia Interface HDMI High Definition Multimedia Interface is an interface that supports both video and audio on a single digital connection allowing you to enjoy high quality digital picture and sound The HDMI specification supports HDCP High bandwidth Digital Contents Protection a copy protection technology that incorporates coding technology for digital video signals E L F E Low Frequency Effects Sound effects of low frequencies which are output from a subwoofer in Dolby Digital or DTS etc By adding a deep bass with a frequency between 20 to 120 Hz audio becomes more powerful E Sampling frequency To convert analog audio to digital analog data should be quantified This process is called sampling and the number of times per second the analog data is quantified is called the sampling frequency A standard music CD stores data quantified at 44 100 times per second which is expressed
45. evels TEST TONE page 27 Before you perform Auto Calibration Before you perform the Auto Calibration set up and connect the speakers page 13 15 e The AUTO CAL MIC jack is used for the supplied optimizer microphone only Do not connect other microphones to this jack Doing so may damage the receiver and the microphone During the calibration the sound that comes out of the speakers is very loud The volume of the sound cannot be adjusted Pay attention to the presence of children or to the effect on your neighborhood e Perform the Auto Calibration in a quiet environment to avoid the effect of noise and to get a more accurate measurement If there are any obstacles in the path between the optimizer microphone and the speakers the calibration cannot be performed correctly Remove any obstacles from the measurement area to avoid measurement error Notes If the muting function has been activated before you perform Auto Calibration the muting function will be set to off automatically e When you use the S AIR product disconnect the headphones continued 23 GB payeys Burje5 Example HT SS360 5 EtG Optimizer enu microphone Sises CAL MIC 1 Connectthe supplied optimizer microphone to the AUTO CAL MIC jack 2 Set up the optimizer microphone Place the optimizer microphone at your listening position You can also use a stool or tripod so
46. h the DIGITAL MEDIA PORT adapter 18 Notes on connecting DIGITAL MEDIA PORT adapter e Do not connect or disconnect the DIGITAL MEDIA PORT adapter while the receiver is turned on Be sure to make DMPORT connections firmly insert the connector straight in As the connector of the DIGITAL MEDIA PORT adapter is fragile be sure to handle with care when placing or moving the receiver When connecting the DIGITAL MEDIA PORT adapter be sure the connector is inserted with the arrow mark facing toward the arrow mark on the DMPORT jack To detach the DIGITAL MEDIA PORT adapter press and holed both sided of the connector and then pull out the connector Connecting components with HDMI jacks HDM is the abbreviated name for High Definition Multimedia Interface It is an interface which transmits video and audio signals in digital format Sony recommends that you connect components to the receiver using an HDMI cable With HDMI you can easily enjoy both high quality sound and high quality images However it is necessary to connect the audio output of the TV to the audio input of the receiver using an optical cord to listen to the TV multi channel surround sound broadcasting from the receiver By connecting Sony BRAVIA Sync compatible components using HDMI cables BRAVIA Sync Features makes operations simpler page 45 HDMI features e A digital audio signals transmitted by HDMI can be output from the s
47. he Control for HDMI Easy Setting you need to set the Control for HDMI function for the connected components to on before you perform the Control for HDMI Easy Setting from the TV Playing back components with one touch operation One Touch Play You can enjoy sound and image from the components connected to the receiver via HDMI connections by a simple operation Play back a connected component The receiver and the TV are turned on automatically and switched to the appropriate HDMI input Note Be sure that the System Audio Control setting is set to on Watching a DVD Blu ray disc by simple operation You can also select a connected component such as a DVD Blu ray disc player using the TV menu In this case the receiver and the TV switch to the appropriate HDMI input Note Depending on the TV the start of the content may not be output Tip You can enjoy the components that are connected to the HDMI jacks even if you turn the receiver off The ACTIVE STANDBY indicator lights up in amber Enjoying the TV sound from the speakers connected to the receiver System Audio Control You can enjoy the TV sound from the speakers connected to the receiver by a simple operation You can operate System Audio Control function using the TV menu For details refer to the operating instructions supplied with the TV When System Audio Control function is turned on the receiver will turns on and switches to the appropri
48. iesuesisctatesvestctedustateneesacteeces Using the Sleep Timer SLEEP Switching the audio input mode IN MODE wis sce cei cnee need 51 Using an S AIR Product eee 52 Using the Remote Changing the input button assignments 60 Additional Information Glossa Yidi ia neiii 61 PLECAUtLONS chedere 63 Troubleshooting ssesesseeseiseseesersesersrsenese 64 SpecificatlOn Sessien 69 TIGER ed iei Back cover 5 GB Description and location of parts Front panel Name Function EELO Press to turn the receiver on standby on or off page 22 29 30 2 ACTIVE Lights up in amber when STANDBY the Control for HDMI lamp and or S AIR standby mode are set to on and the receiver is on standby mode Note If the ACTIVE STANDBY lamp is flashing see page 68 3 Display The current status of the selected component or a list of selectable items appears here page 7 4 White lamp Lights up when the receiver is on and DSPL is set to on in DISPLAY function page 50 Lights off when the receiver is in standby mode or DSPL is set to off in DISPLAY function 5 Remote sensor Receives signals from remote commander 6 MASTER Turn to adjust the volume VOLUME level of all speakers at the same time page 28 29 30 7 INPUT Press to select the input SELECTOR source to
49. ing the wall material or screws to be used e Sony is not responsible for accident or damage caused by improper installation insufficient wall strength or improper screw installation natural calamity etc e For HT SF360 if you install the speakers on the wall you do not need to attach the supplied speaker stand 2 Connecting the speakers Before connecting the cords be sure to disconnect the AC power cord mains lead payeys Bunje5 t CENTER SUBWOOFER Connector Speaker cord supplied PA Front speaker left E Front speaker right Center speaker BD Surround speaker left Surround speaker right Subwoofer continued 1558 Note on speaker cords The connector of the speaker cords are the same color as the speaker jack to be connected When connecting a speaker cord be sure to match the colored connector to the speaker jack on the receiver Connector Speaker jack Red FRONT R White FRONT L Grey SURR Blue SUR L Green CENTER Purple SUBWOOFER To connect the speakers correctly Check the speaker type by referring to the speaker label at the rear panel of the speakers Character on Speaker type speaker label L Front left R Front right SL Surround left SR Surround right The center speaker and subwoofer do not have the character on the speaker label For details on the spea
50. ker type see page 4 16 3 Connecting the TV You can watch the selected input image when you connect the HDMI OUT jack toa TV It is not necessary to connect all the cords Connect audio and video cords according to the jacks of your components Before connecting the cords be sure to disconnect the AC power cord Audio video Audio signal i m OO AUDIOIN J AUDIO IN TV SAT mA MAX qd i po SS SS Sy E5 m BDIN DVD IN SATIN OUT Q Audio cord not supplied Optical digital cord not supplied HDMI cable not supplied We recommend that you use a Sony HDMI cable 750 COAXIAL Notes e Be sure to turn on the receiver when the video and audio signals of a playback component are being output to a TV via the receiver Unless the power is turned on neither video nor audio signals will be transmitted e When connecting optical digital cords insert the plugs straight in until they click into place e Do not bend or tie optical digital cords Tips To output the sound of the TV from the speakers connected to the receiver be sure to connect the audio output jacks of the TV to the TV IN jacks of the receiver turn off the TV s volume or activate the TV s muting function e All the digital audio jacks are compatible with 32 kHz 44 1 kHz 48 kHz and 96 kHz sampling frequencies 4 Con
51. lection The number 5 4 and C gt buttons have tactile dots Use the tactile dots as references when operating the receiver Notes e Some functions explained in this section may not work depending on the model The above explanation is intended to serve as an example only Therefore depending on the component the above operation may not be possible or may operate differently than described HT SS360 only Getting Started 1 Installing the speakers This receiver allows you to use a 5 1 channel speaker system To fully enjoy theater like multi channel surround sound be sure to connect all the speakers two front speakers a center speaker and two surround speakers and a subwoofer 5 1 channel You can place your speakers as shown below PN Front speaker left E Front speaker right fe Center speaker BD Surround speaker left H Surround speaker right a Subwoofer Tip Since the subwoofer does not emit highly directional signals you can place it wherever you want peyeys Buine5 HT SF360 only 13 Installing the speakers on a flat surface Before you install the speaker and subwoofer be sure to attach the supplied foot pads to prevent vibration or movement as shown in the illustration below Example of HT SS360 front speaker Attach the supplied foot pad to the below speakers Model Speakers HT SF360 center speaker and subwoofer HT SS360 all the speakers and su
52. limit of your receiver For details see Using the Volume Limit function page 48 E P SAVE Power Save Lets you save the power consumption during power standby mode while Control for HDMI function is set to on For details see Using the Power Saving function Power Save page 49 Settings for the Auto Calibration A CAL menu You can use the A CAL menu to make settings for the Auto Calibration function to suit your preference Select A CAL in the amplifier menus For details on adjusting the parameters see Navigating through menus page 31 and Overview of the menus page 32 A CAL menu parameters E START Auto Calibration start Lets you start the Auto Calibration function For details see Performing Auto Calibration page 24 E A CAL CLR Clear Auto Calibration result Lets you delete the Auto Calibration result For details on the operation see Clearing the measurement result page 26 35 GB suoneado 131dwy Settings for the Speaker SP SETUP menu You can use the SP SETUP menu to set the distance of the speakers connected to this receiver Select SP SETUP in the amplifier menus For details on adjusting the parameters see Navigating through menus page 31 and Overview of the menus page 32 SP SETUP menu parameters E CNT SP Center speaker Lets you select the center speaker E SUR SP Surround speaker Lets you sele
53. main unit No transmission gt 5 S AIR sub unit er gt SAIR sub unit Pairing 1 Place the S AIR sub unit that you want to pair near the S AIR main unit Note Remove headphones from the surround amplifier if connected on O of Ff CO Match the IDs of the S AIR main unit and the S AIR sub unit e To set the ID of the S AIR main unit see To set the ID of the S AIR main unit page 54 To set the ID of the S AIR sub unit refer to the operating instructions supplied with the S AIR sub unit Press AMP MENU Press repeatedly to select S AIR Press or to enter the menu Press repeatedly to select PAIRING Press or to enter the parameter Press repeatedly to select the setting you want then press G e START The S AIR main unit starts pairing e CONDIN you can check the current ID When the pairing setting is timed out NO PAIR appears in the display suoijeiodoO 10410 Start pairing of the S AIR sub unit E For the surround amplifier Refer to the operating instructions supplied with surround amplifier E For the S AIR receiver Refer to the operating instructions supplied with S AIR receiver 1 OPairing completed COMPLETE appears in the display To exit the menu Press AMP MENU continued 55 GB Note Perform the pairing within several minutes after step 8 Otherwise the pairing is c
54. n is on press SOUND FIELD e Sound fields do not function for signals with a sampling frequency of more than 48 kHz Dolby Digital or DTS multi channel sound is not reproduced e Check that the DVD etc you are playing is recorded in Dolby Digital or DTS format e When connecting the DVD player etc to the digital input jacks of this receiver check the audio setting the settings for the audio output of the connected component There is no sound from the component connected to the DIGITAL MEDIA PORT adapter e Adjust the volume of this receiver e The DIGITAL MEDIA PORT adapter and or component is not connected correctly Turn off the receiver then reconnect the DIGITAL MEDIA PORT adapter and or component e Check the DIGITAL MEDIA PORT adapter and or component device to make sure it supports this receiver Video There is no picture or an unclear picture appears on the TV screen or monitor e Make sure you have connected the video output of your video component to the TV e Move your audio components away from the TV e Depending on the DIGITAL MEDIA PORT adapter video output may not be possible continued 65 GB uonewojuy jeuonippy g HDMI The volume turns down when the output method changes from the TV speaker to the speakers connected to the receiver e The Volume Limit function is working For details see Using the Volume Limit function page 48 The source sound i
55. nals of a Super Audio CD are not output Audio signals sampling frequency bit length etc transmitted from an HDMI jack may be suppressed by the connected component Check the setup of the connected component if the image is poor or the sound does not come out of a component connected via the HDMI cable Sound may be interrupted when the sampling frequency the number of channels or the audio format of the audio output signals from the playback component is switched When the connected component is not compatible with copyright protection technology HDCP the image and or the sound from the HDMI OUT jack may be distorted or may not be output In this case check the specification of the connected component You can enjoy multi channel Linear PCM only with an HDMI connection Set the image resolution of the playback component to 720p 10801 or 1080p when you output 96 kHz multi channel sound over an HDMI connection You may need to make certain settings on the image resolution of the player before you can enjoy multi channel Linear PCM Refer to the operating instructions of the player Refer to the operating instructions of each component connected for details We do not recommend using an HDMI DVI conversion cable When you connect an HDMI DVI conversion cable to a DVI D component the sound and or the image may not be output 20 Connecting video components The following illustration shows how to connect video comp
56. necting the audio EE video components How to hook up your components This section describes how to hook up your components to this receiver Before you begin refer to Component to be connected below for the pages which describe how to connect the audio video components Before connecting the cords be sure to disconnect the AC power cord mains lead After hooking up all your components proceed to 5 Connecting the antennas page 21 payeys Burje5 Component to be connected To connect See TV page 16 Audio components page 18 e Super Audio CD player CD player e DIGITAL MEDIA PORT adapter Components with HDMI jack page 19 Video components page 20 e Satellite tuner Set top box DVD player DVD recorder e VCR 1768 Connecting audio components The following illustration shows how to connect audio components such as Super Audio CD player CD player and DIGITAL MEDIA PORT adapter You can also view the images on the TV screen by connecting the video output of the DIGITAL MEDIA PORT adapter to the video input of the TV Super Audio CD player CD player Audio signal DIGITAL MEDIA PORT adapter Q Audio cord not supplied Video cord not supplied The type of connector varies depending on the DIGITAL MEDIA PORT adapter For details refer to the operating instructions supplied wit
57. nge The distance between the optimizer microphone and the speakers is too closed Set them away and then try to perform the Auto Calibration WARN 43 The distance and position of a subwoofer cannot be detected This may be caused by noise Try to perform the Auto Calibration in a quiet environment NO WARN There is no warning information When you select DIST or LEVEL You can check the speaker distance or speaker level When you have finished Disconnect the optimizer microphone from the receiver 268 Note If you have changed the position of the speakers it is recommended that you perform Auto Calibration again in order to enjoy the surround sound Clearing the measurement result You can delete the result of Auto Calibration If there is no saved data you cannot delete the result T Press AMP MENU 2 Press repeatedly until A CAL appears then press or 3 Press repeatedly to select A CAL CLR then press G or gt 4 Press repeatedly to select YES then press G The saved result is deleted The settings for speaker distance and speaker level return to their defaults 8 Adjusting the speaker levels TEST TONE You can adjust the speaker levels while listening to the test tone from your listening position AMP MENU iS CAMP MENU Gp em S amp S TOOLS cs ey 6 C S T Press AMP MENU SET HDM
58. nput appears on the display volume You can also use MASTER VOLUME on the receiver To activate the muting function Press 0X The muting function will be canceled when you do the following e Press oX again e Increase the volume e Turn off the receiver To avoid damaging your speakers Before you turn off the receiver be sure to turn down the volume level 288 Enjoying sound images from the components connected to the receiver wv DS omport avi VO VW SYSTEM STANDBY VIDEO2 Input e e buttons SAT TV SA CDICD TUNER e e e e TOPMENU MENU Fi F2 Teen gt e sounD AMP MENU 3 FIELD m o are gt Tools DISPLAY options OX a e JSN E SSI RETURNEXIT A MENUHOM Enjoying TV 1 Turn on the TV and choose a program For details refer to the operating instructions of the TV N Turn the receiver on oo Press TV 4 Adjust the volume of the receiver Tips e When you connect a Sony TV the audio input of the TV is switched and the image from the TV tuner is displayed on the TV screen automatically by pressing the TV button To change this setting see Changing the input button assignments page 60 The sound may be output from the TV s speaker In this case turn the volume of the TV s speaker down to the minimum Enjoying a satellite tuner 1 Turn on the TV For details refer to the operating instructions of the
59. nput to the HDMI jack on the receiver is not output from the receiver or the TV speaker e Check the setting of CONTROL FOR HDMI in the SET HDMI menu page 35 e Check the HDMI connection page 19 e You cannot listen to the Super Audio CD by connecting HDMI e Depending on the playback component you may need to set up the component Refer to the operating instructions supplied with each component The source image input to the HDMI jack on the receiver is not output from the TV e Check the HDMI connection page 19 e Depending on the playback component you may need to set up the component Refer to the operating instructions supplied with each component The control for HDMI function does not work e Check the HDMI connection page 19 e Make sure CONTROL FOR HDMI is set to CTRL ON in SET HDMI menu e Make sure the connected component is compatible with the Control for HDMI function e Check the Control for HDMI settings on the connected component Refer to the operating instructions of the connected component e Repeat the procedures of Preparing for the BRAVIA Sync if you change the HDMI connection connect disconnect the AC power cord or there is a power failure page 45 66 No sound is output from the receiver and TV speaker while using the System Audio Control function e Make sure the TV is compatible with the System Audio Control function e If you canno
60. ntative for EMC and product safety is Sony Deutschland GmbH Hedelfinger Strasse 61 70327 Stuttgart Germany For any service or guarantee matters please refer to the addresses given in separate service or guarantee documents 3 GB SEE About This Manual The instructions in this manual are for model HT SF360 and HT SS360 In this manual models of area code CEL is used for illustration purposes unless stated otherwise Any difference in operation is clearly indicated in the text for example Models of area code AU only The HT SF360 consists of e Receiver STR KS360S e Speaker system Front speaker SS MSP36F Center speaker SS CNP36 Surround speaker SS SRP36F Subwoofer SS WP36 The HT SS360 consists of e Receiver STR KS360S e Speaker system Front speaker SS MSP36S Center speaker SS CNP36 Surround speaker SS SRP36S Subwoofer SS WP36 a Be sure to use only the supplied speakers e The instructions in this manual describe the controls on the supplied remote You can also use the controls on the receiver if they have the same or similar names as those on the remote About area codes The area code of the receiver you purchased is shown on the lower portion of the rear panel see the illustration below 4 XXX XXX XX AA Area code Any differences in operation according to the area code are clearly indicated in the text for example Models of area cod
61. omponents obtained Moa PL I PL lights up when the by Pro Logic processing 1 PLII receiver applies Pro Logic Example processing to 2 channel signals in Recording format Front order to output the center and Surround 3 2 1 surround channel signals Sound Field A F D AUTO A PLIP lights up when the Pro LICR Logic II Movie Music decoder is activated SWJ SL SR 12 DTS Lights up when the receiver is 4 0 D Lights up when receiver is decoding DTS signals decoding Dolby Digital signals Note 5 Note When playing a DTS format disc When playing a Dolby Digital be sure that you have made digital format disc be sure that you have connections made digital connections 13 Sw Lights up when the audio signal is 5 S AIR Lights up when the S AIR output from the SUBWOOFER transmitter not supplied is connected jack 758 Rear panel _ SPEAKERS section 6 DIGITAL INPUT OUTPUT section Connects to the supplied speakers and subwoofer page 15 0 OPT IN jacks 2 S AIR EZW T100 With slot cover CAUTION S Please do not remove WAN ij the slot cover until you want to install the wireless transmitter slot Connects to a wireless transmitter not supplied page o e coe Connects toa DVD pl
62. on e For receiver operation you can only use the DISPLAY button when the TUNER input is selected e Point the remote at the remote sensor on the receiver e Remove any obstacles in the path between the remote and the receiver e Replace all the batteries in the remote with new ones if they are weak e Make sure you select the correct input on the remote 6868 Others The ACTIVE STANDBY lamp is flashing e The receiver is in protection mode Turn off the receiver and turn it on again Error messages If an error message appears while you perform Auto Calibration see When error codes appear page 25 to solve the problem If you are unable to remedy the problem using the troubleshooting guide Clearing the receiver s memory may remedy the problem page 22 However note that all memorized settings will be reset to their factory settings and you will have to readjust all settings on the receiver If the problem persist Consult your nearest Sony dealer Note that if service personnel changes some parts during repair these parts may be retained In the event of a problem with S AIR function have a Sony dealer check the entire system together S AIR main unit and S AIR sub unit Reference sections for clearing the receiver s memory To clear See All memorized settings page 22 Specifications Amplifier section Models of area code CEL CEK AU TW Power Output Stereo mode
63. onents such as DVD player DVD recorder VCR etc It is not necessary to connect all the cords Connect audio and video cords according to the jacks of your components DVD recorder DVD player Satellite tuner Set top box Audio signal Audio signal Audio signal VCR Audio cord not supplied Coaxial digital cord not supplied Optical digital cord not supplied Notes To input multi channel digital audio from the DVD player set the digital audio output setting on the DVD player Refer to the operating instructions supplied with the DVD player e When connecting optical digital cords insert the plugs straight in until they click into place e Do not bend or tie optical digital cords Be sure to connect the video output of the DVD player DVD recorder and VCR to the TV so that the image is displayed on the TV Refer to the operating instructions of each connected component for details e You cannot do recording on the DVD recorder or VCR via this receiver For details refer to the operating instructions supplied with the DVD recorder or VCR Tip All the digital audio jacks are compatible with 32 kHz 44 1 kHz 48 kHz and 96 kHz sampling frequencies 5 Connecting the antennas Connect the supplied AM loop antenna and FM wire antenna Before connecting the antennas be sure to disconnect the AC power cord mains lead FM
64. onippy g If color irregularity is observed again Place the speaker further away from the TV set If howling occurs Reposition the speakers or turn down the volume on the receiver On cleaning Clean the cabinet panel and controls with a soft cloth slightly moistened with a mild detergent solution Do not use any type of abrasive pad scouring powder or solvent such as alcohol or benzine If you have any questions or problems concerning your receiver please consult your nearest Sony dealer 6458 Troubleshooting If you experience any of the following difficulties while using the receiver use this troubleshooting guide to help you remedy the problem Audio There is no sound no matter which component is selected or only a very low level sound is heard e Check that the speakers and components are connected securely e Check that both the receiver and all components are turned on e Check that MASTER VOLUME is not set to VOL MIN e Press i to cancel the muting function e Check that you have selected the correct component with the input buttons The protective device on the receiver has been activated Turn off the receiver eliminate the short circuit problem and turn on the power again e Check that the IN MODE setting is correct for SAT input There is no sound from a specific component e Check that the component is connected correctly to the audio input jacks for that componen
65. p and prolong the life of the receiver Do not place the receiver near heat sources or in a place subject to direct sunlight excessive dust or mechanical shock Do not place anything on top of the cabinet that might block the ventilation holes and cause malfunctions Do not place the receiver near equipment such as a TV VCR or tape deck If the receiver is being used in combination with a TV VCR or tape deck and is placed too close to that equipment noise may result and picture quality may suffer This is especially likely when using an indoor antenna Therefore we recommend using an outdoor antenna Use caution when placing the receiver or speakers on surfaces that have been specially treated with wax oil polish etc as staining or discoloration of the surface may result On operation Before connecting other components be sure to turn off and unplug the receiver If you encounter color irregularity on a nearby TV screen The center speaker is magnetically shielded to allow it to be installed near a TV set However color irregularities may still be observed on certain types of TV sets As the front surround speakers and subwoofer are not magnetically shielded we recommend that you place the surround speakers and subwoofer slightly further away from TV set page 13 If color irregularity is observed Turn off the TV set then turn it on again after 15 to 30 minutes continued 63 GB uopewnoju jeu
66. peakers connected to the receiver This signal supports Dolby Digital DTS and Linear PCM e This receiver supports xvYCC transmission e This receiver supports the Control for HDMI function For details see Using BRAVIA Sync features page 45 TV etc Audio video signals Audio signals OUTPUT payeys Bunje5 FM 750 COAXIAL SAT I A P es OUTPUT OUTPUT OUTP HOMI Audio video Audio video Audio video signals signals signals Satellite tuner Set top box Blu ray disc player DVD player DVD recorder HDMI cable not supplied We recommend that you use a Sony HDMI cable Optical digital cord not al Audio cord not ee a If you connect a DVD player be sure to change the factory setting of the DVD button on the remote so that you can use the button to control your DVD player For details see Changing the input button assignments page 60 Connect at least one of the audio cords B or continued 1982 Notes on HDMI connections An audio signal input to the HDMI IN jack is output from the SPEAKERS jacks and HDMI OUT jack It is not output from any other audio jacks Video signals input to the HDMIIN jack can only be output from the HDMI OUT jack The multi stereo area audio sig
67. r Remote Button Function To control the SAT Remote Button Function 6 z Press to display the guide i3 MENU HOME Press to display the menu 14 ea gt gt I Press to skip chapters Press to jump backward gt Press to jump forward lt gt Press to fast reverse or to fast forward the disc when pressed during playback D gt playback Play mode button II pause press again to resume normal playback E stop 7 Press to select a menu item and enters the selection t 4 4 gt 21 BD DVD Press to display the top menu TOP MENU or disc menu MENU To control the HDD DVD COMBO Remote Button Function 4 F1 Press to select the HDD F2 Press to select the DVD 3 MENU HOME Press to display the menu 14 lt gt PI Press to specify the previous next chapter track Ka Press to change to replay mode Press to advance m iaai Press to fast reverse or to fast forward the disc when pressed during playback gt playback Play mode button II pause press again to resume normal playback H stop 7 Press to move the highlight cursor and selects the item 4 4 e gt 21 BD DVD Press to display the top menu TOP MENU or disc menu MENU 1268 Guide menu 3 MENU HOME ed 4 4 e gt Press to display the menu Press to select a menu item and enters the se
68. r gt 4 Press repeatedly to select the maximum volume level you want The maximum volume level changes as follows MAX gt 39 gt 38 21 gt MIN 5 Press AMP MENU The AMP MENU turns off Notes This function is available only when the Control for HDMI function is set to on e This function is not available when the output method changes from the speakers connected to the receiver to the TV speaker Tips e Sony recommends that you set the maximum volume level to a little lower than the volume you usually listen to e Regardless of the maximum volume level you set the MASTER VOLUME on the receiver and the lt button of the remote are operable If you do not want to limit the maximum volume level select MAX age Turning off the receiver with the TV System Power Off When you turn the TV off by using the POWER button on the TV s remote the receiver and the connected components turn off automatically You can also use the receiver s remote to turn off the TV Seale WV VIDEO1 VIDEO2 BD DVD SAT TV SA CD CD TUNER BD IDVD TOP MENU MENU F1 F2 DIGITAL ANALOG fF AUDIO we AMP MENU Ga Gm w TOOLS DISPLAY ey as aTa PRESET PRESET TUNING TUNING W o TV a Press TV and TV I at the same time The TV receiver and the components connected via HDMI are turned off Notes e Set the TV Standb
69. r etc SLB Info Text reveal In digital mode Press to display brief details of the program currently being watched In analogue mode Press to display information such as current channel number and screen format In Text mode Press to reveal hidden information e g answers to a quiz Text Press to display Text Ss Numeric buttons number 5 Press to select channels Press ENTER 8 to change channels immediately ANALOG Press to change to analog mode DIGITAL Press to change to digital mode To control the DVD recorder Blu ray Disc recorder Remote Button Function 4 F1 Press to select the HDD F2 Press to select the Blu ray Disc DVD 13 MENU HOME Press to display the menu 14 Ke Press to skip chapters Press to jump backward while viewing live or recorded programs Press to jump forward while viewing recorded programs gt gt I Press to skip forward to the next available chapter lt gt Press to fast reverse or to fast forward the disc when pressed during playback gt playback II pause press again to resume Play mode button normal playback H stop 7 Press to select a menu item and enters the selection 4 4 4 gt 21 BD DVD Press to display the top menu TOP MENU or disc menu MENU continued 11 To control the DVD player Blu ray Disc playe
70. r HDMI Easy Setting function When your TV is compatible with the Control for HDMI Easy Setting function When you connect a Sony TV with the Control for HDMI Easy Setting function the Control for HDMI function of the receiver can be turned on simultaneously by turning the Control for HDMI function of the TV on 1 Make sure that the receiver TV and playback components are connected using an HDMI cable not supplied The respective components must be compatible with the Control for HDMI function 2 Turn on the receiver TV and playback components 3 Turn the Control for HDMI function of the TV on The Control for HDMI function of this receiver and all the connected components are simultaneously turned on During setup SCANNING appears in the display and once setting is completed COMPLETE will appear Wait until the setup is complete For details on setting the TV refer to the operating instructions supplied with the TV continued 4548 s n e ouAS VIAVYg BuISN i When your TV is not compatible with the Control for HDMI Easy Setting function Turn the Control for HDMI function of the receiver and the connected component on individually ODEDE CD B S AMP MENU AMP GE CO e S MENU RETURN EXIT MENU HOME 1 Perform the steps given in When your TV is compatible with the Control for HDMI Easy Setting function page 45 2 Press AMP MENU
71. rated 108 W 108 W 3 ohms at 1 kHz THD 1 Surround mode reference RMS Output 3 ohms at 1 kHz THD 10 FRONT 143 Wich CENTER 143 W SUR 143 Wich 1 5 ohms at 70 Hz THD 10 SUBWOOFER 285 W Models of area code SP TH Power Output Stereo mode rated 90 W 90 W 3 ohms at 1 kHz THD 1 Surround mode reference RMS Output 3 ohms at 1 kHz THD 10 FRONT 125 Wich CENTER 125 W SUR 125 W ch 1 5 ohms at 80 Hz THD 10 SUBWOOFER 210 W Measured under the following conditions Area code Power requirements CEL CEK 230 V AC 50 Hz AU SP 240 V AC 50 Hz TW 110 V AC 60 Hz TH 220 V AC 50 Hz Inputs Analog Sensitivity 1 V 50 kohms Digital Coaxial Impedance 75 ohms Tone Gain levels 10 dB 0 5 dB step Reproduction frequency range 28 20 000 Hz FM tuner section Tuning range 87 5 108 0 MHz Antenna FM wire antenna Antenna terminals 75 ohms unbalanced Intermediate frequency 10 7 MHz AM tuner section Tuning range Area code Tuning scale 10 kHz step 9 kHz step AU 530 531 1 710 kHz 1 710 kHz TW TH SP 530 531 1 610 kHz 1 602 kHz CEL CEK 531 1 602 kHz Antenna Loop antenna Intermediate frequency 450 kHz General Power requirements Area code Power requirements CEL CEK SP 220 240 V AC 50 60 Hz AU 240 V AC 50 Hz TW 110 V AC 60 Hz TH 220 V AC 50 60 Hz Power output DIGI
72. rews small HT SF360 only 12 Screws large HT SF360 only 8 For details on the area code of the component you are using see page 4 Design and specifications are subject to change without notice Halogenated flame retardants are not used in the certain printed wiring boards 71 GB uopewnoju jeuonippy p Index A AUTO CALIBRATION 23 Blu ray disc player connecting 19 playback 30 C CD player connecting 18 playback 30 Control for HDMI connecting 19 preparing 45 D Digital Cinema Sound DCS 40 61 DIMMER 50 DISPLAY 50 Dolby Digital 61 DTS 62 DVD player connecting 20 playback 30 DVD recorder connecting 20 E Error messages 68 H HDMI connecting 19 Control for HDMI 35 l IN MODE 51 Initial setup 22 M Menu A CAL 35 CUSTOM 38 LEVEL 37 S AIR 39 SET HDMI 35 SP SETUP 36 TONE 37 Muting 28 O One Touch Play 47 P PAIRING 54 Power Save 49 R RDS 44 Remote commander 9 413003111 3 Sony Corporation Printed in Malaysia S S AIR 52 Satellite tuner Set top box connecting 19 enjoying 29 Selecting component 28 Sleep Timer 51 Speakers connecting 15 Super Audio CD player connecting 18 playback 30 System Audio Control 47 System Power Off 48 T TEST TONE 27 Tuner connecting 21 Tuning automatically 41 to preset stations 43 TV connecting 16 enjoying 29 V VCR connecting 20 playback 30 Volume Limit 48 http www sony net
73. s until T TONE appears then press G or 1 Opress repeatedly to select T TONE N then press G 11 Press AMP MENU The AMP menu turns off When atest tone is not output from the speakers The speaker cords may not be connected securely The speaker cords may have the short circuit problem The test tone signals are not output from the HDMI OUT jack 27 GB Selected input Components that can Playback Display be played back DMPORT DIGITAL MEDIA PORT S DMPORT adapter connected to the electing a component DMPORT jack VIDEO or VCR etc connected to ae rete we VIDEO2 the VIDEO 1 or VIDEO 2 VIDEO 1 or jack VIDEO 2 nes ne BD Blu ray disc player etc BD connected to the BD jack TSEMENU MEND DVD DVD player DVD DIGITAL ANALOQ EF DYD recorder etc connected GD EDIED C to the DVD jack SAT Satellite tuner set top SAT box etc connected to the A 5 SAT jack a lt AMP MENU Sre TV TV etc connected to the DISPLAY options 3K TV TV jack RO O i i s SA CD CD Super Audio CD CD GOF SA CD CD player etc connected to B a the SA CD CD jack PDQ O PRETURNEXIT MENUJHOMI TUNER Built in radio tuner FM or AM band 1 Press the input button to select 2 Turn on the component and a component start playback You can also use INPUT SELECTOR on the receiver 3 Press 4 to adjust the The selected i
74. set stations These names for example X YZ appear in the display when a station is selected Note that no more than one name can be entered for each preset station 1 Press TUNER repeatedly to select the FM or AM band You can also use INPUT SELECTOR on the receiver 2 Press PRESET or PRESET repeatedly to select the preset station you want to create an index name for Press MENU HOME Press repeatedly to select NAME IN Press G Create a name by using 4l lel gt Press repeatedly to select a character then press to move the cursor to the next position Letters numbers and other symbols can be input for a radio station name ol continued 4368 suoijesado JOUNL If you enter a wrong character Press repeatedly until the character to be changed flashes then press repeatedly to select the desired character To erase the character press repeatedly until the character to be erased flashes then press CLEAR T Press G COMPLETE appears in the display and the station name is stored 8 Press MENU HOME Viewing the station name or frequency in the display When the receiver is set to FM or AM you can check the frequency using the display Press DISPLAY Each time you press DISPLAY the display changes as shown Station name Frequency 4 This is displayed if you have entered a name for a preset station
75. setting page 54 e Place the S AIR main unit and S AIR sub unit closer to each other e Avoid use of equipment that generates EM electromagnetic energy such as a Ground wire microwave oven not supplied e Place the S AIR main unit and S AIR sub unit separately from other wireless To ground devices e Avoid using any other wireless devices e Change the RF CHNG setting page 57 e Change the S AIR ID settings of the S AIR main unit and S AIR sub unit e Turn off the receiver and S AIR sub unit then turn on again continued 67 uopewnoju jeuonippy Radio stations cannot be tuned in e Check that the antennas are connected securely Adjust the antennas and connect an external antenna if necessary The signal strength of the stations is too weak when tuning in with automatic tuning Change to monaural reception page 42 e No stations have been preset or the preset stations have been cleared when tuning by scanning preset stations Preset the stations page 42 RDS does not work e Make sure that you are tuned to an FM RDS station e Select a stronger FM station The RDS information that you want does not appear e Contact the radio station and find out whether they actually provide the service in question If so the service may be temporarily out of order a Models of area code CEL CEK only Remote control The remote does not functi
76. sting the speaker levels TEST TONE cece eee teers 27 Playback Selecting a component cece 28 Enjoying sound images from the components connected to the receiver 29 Amplifier Operations Navigating through menus eee 31 Settings for the HDMI SET HDMI menu 35 Settings for the Auto Calibration A CAL Men iecerei 35 Settings for the Speaker SP SETUP men 0 eee 36 Adjusting the level LEVEL menu 37 Adjusting the tone TONE menv 37 Settings for the Custom Menu CUSTOM men cceeeeeeeeteeeeee 38 Settings for the S AIR S AIR menu 39 Enjoying Surround Sound Selecting the sound field 40 Tuner Operations Listening to FM AM radio ee 41 Presetting radio stations 42 Using the Radio Data System RDS 44 Models of area code CEL CEK only Using BRAVIA Sync features What is BRAVIA Sync c eee 45 Preparing for the BRAVIA Sync 45 Playing back components with one touch operation One Touch Play 47 Enjoying the TV sound from the speakers connected to the receiver System Audio Control ee eeeeeeeeeee 47 Turning off the receiver with the TV System Power Off 48 Using the Power Saving function Power Save ccc cieseccassictestasttacactectects 49 Other Operations Changing the brightness of the display DIMMER aaia 50 Changing the display setting DISPLAY s
77. t SAVE in step 2 The measurement results are saved When error codes appear Try the remedies and perform the Auto Calibration again Error code Cause and remedies ERROR 32 e The sound input from the optimizer microphone is out of the acceptable range The optimizer microphone or subwoofer may be damaged Contact your Sony dealer or local authorized Sony service facility ERROR F 33 The front speakers are not connected Check that the front speakers are connected properly ERROR SR 33 Either the surround left or surround right speaker is not connected Check that the surround speakers are connected properly continued 25 GB Error code Cause and remedies ERROR SW 33 The subwoofer may be damaged Contact your Sony dealer or local authorized Sony service facility When you select WRN CHK If a warning on the measurement result is present detailed information is displayed Press or to return to step 2 of Confirming saving the measurement results Warning code Explanation WARN 40 The Auto Calibration has completed However the noise level is high You may be able to perform the Auto Calibration properly if you try it again even though the measurement cannot be performed in all environments Try to perform the Auto Calibration in a quiet environment WARN 41 WARN 42 The sound input from the optimizer microphone is out of the acceptable ra
78. t e Check that the cord s used for the connection is are fully inserted into the jacks on both the receiver and the component There is no sound from one of the front speakers e Make sure you have connected to both the Land R jacks of an analog component and not only to either the L or R jack Use an audio cord not supplied There is no sound from digital sources from OPTICAL input jack e Check that the IN MODE is set to AUTO for SAT input There is severe hum or noise e Check that the speakers and components are connected securely e Check that the connecting cords are away from a transformer or motor and at least 3 meters away from a TV set or fluorescent light e Move your audio components away from the TV The plugs and jacks are dirty Wipe them with a cloth slightly moistened with alcohol There is pop noise from a specific component connected to this receiver when you turn on the component e Check that the IN MODE is set to AUTO for SAT input page 51 There is no sound or only a very low level sound is heard from the center surround speakers e Select a MOVIE D C S mode page 40 e Adjust the speaker level page 27 e Check that the speakers are connected securely There is no sound from the subwoofer e Check that the subwoofer is connected correctly and securely The surround effect cannot be obtained e Make sure the sound field functio
79. t listen to the sound of a component connected to the receiver Select the appropriate input when you want to watch a program on a component connected via HDMI connection to the receiver Change the TV channel when you want to watch a TV broadcast Select the component or input you want to watch when you watch a program on the component connected to the TV Refer to the operating instructions of the TV on this operation When the receiver is in standby mode there is no image or sound on the TV e When the receiver is in standby mode image and sound are output from the HDMI component selected the last time you turned off the system If you are enjoying other component play the component and perform the One Touch Play operation or turn on the system to select the HDMI component you want to enjoy Make sure P SAVE is set to SAVE OFF in the SET HDMI menu if you connect component not compatible with the BRAVIA Sync to the receiver page 49 S AIR function There is noise or the sound skips e If you use another S AIR main unit place it more than 8 m away from this S AIR S AIR connection is not established sound transmission is not established e g the indicator of the main unit S AIR sub unit turns off flashes or e Place the S AIR main unit and S AIR sub turns red unit closer to each other e Avoid use of equipment that generates electromagnetic energy such as a microwave o
80. the normal operation 268 For customers in Australia Disposal of Old Electrical amp Electronic Equipment Applicable in the European Union and other European countries with separate Hm collection systems For customers in Europe Disposal of Old Electrical amp Electronic Equipment Applicable in the European Union and other European countries with separate Hmm collection systems This symbol on the product or on its packaging indicates that this product shall not be treated as household waste Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment By ensuring this product is disposed of correctly you will help prevent potential negative consequences for the environment and human health which could otherwise be caused by inappropriate waste handling of this product The recycling of materials will help to conserve natural resources For more detailed information about recycling of this product please contact your local Civic Office your household waste disposal service or the shop where you purchased the product Disposal of waste batteries applicable in the European Union and other European countries with separate collection systems This symbol on the battery or on the packaging indicates that the battery provided with this product shall not be treated as household waste On certain batteries this symbol might be used in combination with a chemi
81. ut e This function is available only when the Control for HDMI function is set to on ages s n e ouAS WIAWH BuIsn A Other Operations Changing the brightness of the display DIMMER You can change the brightness of the display Press AMP MENU SET HDMI appears on the display 2 Press repeatedly until CUSTOM appears then press or 3 Press repeatedly until DIMMER appears then press or 4 Press repeatedly to select the brightness of the display then press G e DIMMER Y Low lighting e DIMMER N Bright lighting 5 Press AMP MENU The AMP menu turns off 5068 Changing the display setting DISPLAY You can change the display setting 1 2 Press AMP MENU SET HDMI appears on the display Press repeatedly until CUSTOM appears then press or Press repeatedly until DISPLAY appears then press or Press repeatedly to change the display setting then press e DSPL ON The display appears all the time e DSPL OFF The display appears when you operate the receiver Press AMP MENU The AMP menu turns off Using the Sleep Timer SLEEP You can set the receiver to turn off at a preset time when you sleep while listening to music You can preset the time in 10 minutes decrements T Press AMP MENU SET HDMI appears on the display 2 Press repeatedly until CUSTOM appears
82. utput directly e When the bilingual broadcast sound is input Dolby Pro Logic II MOVIE MUSIC are not effective e Multi channel Linear PCM is not available for P AUDIO Depending on the input stream the decoding mode may not be effective e When you select MV D C S depending on the input stream Dolby Pro Logic may be applied automatically e When changing the sound mode while using the S AIR receiver not supplied sound from the S AIR receiver not supplied may skip Tip You can identify the encoding format of DVD software etc by looking at the logo on the package Tuner Operations Listening to FM AM radio You can listen to FM and AM broadcasts through the built in tuner Before operation make sure you have connected the FM and AM antennas to the receiver page 21 Tip The tuning scale for direct tuning differs depending on the area code as shown in the following table For details on area codes see page 4 Area code FM AM AU SP TW TH CN 50kHz 9 kHz CEL CEK 50 kHz 9 kHz The AM tuning scale can be changed page 43 Tuning into a station automatically Auto Tuning suoijesado JOUNL VIDEO1 VIDEO2 BD DVD SAT TV SA CD CD TUNER TUNER BD DVD TOP MENU MENU Fi F2 DIGITAL ANALOG AUDIO THEATRE DISPLAY ors MENU HOME TUNING TUNING continued 41 1 Press TUNER repeatedly to select the FM or AM band You
83. ven e If you use another S AIR main unit place it more than 8 m away from this S AIR main unit e Confirm the S AIR IDs of the S AIR main e Place the S AIR main unit and S AIR sub unit and S AIR sub unit page 54 unit separately from other wireless e Another S AIR sub unit is paired to the devices S AIR main unit Pair the desired S AIR e Avoid using any other wireless devices sub unit with the S AIR main unit page e Change the RF CHNG setting page 57 54 e Change the S AIR ID settings of the The S AIR main unit is paired to another S AIR main unit and S AIR sub unit S AIR sub unit Cancel pairing e Place the S AIR main unit and S AIR sub unit separately from other wireless devices Tuner e Avoid using any other wireless devices e The S AIR sub unit is turned off Make sure the AC power cord mains lead is connected and turn on the S AIR sub unit The FM reception is poor e Use a 75 ohm coaxial cable not supplied to connect the receiver to an outdoor FM antenna as shown below If you connect No sound is heard from the S AIR the receiver to an outdoor antenna ground product it against lightning To prevent a gas e If you use another S AIR main unit place explosion do not connect the ground wire it more than 8 m away from this S AIR to a gas pipe main unit Outdoor FM antenna e Confirm the S AIR IDs of the S AIR main unit and S AIR sub unit page 54 e Confirm the pairing
84. ver Slot cover Notes e Remove the screws from the slot cover bearing the caution mark Do not remove other screws The slot cover is no longer necessary However keep it after detaching 2 Insert the wireless transmitter EZW T100 slot Wireless transmitter Notes e Insert the wireless transmitter with the S AIR logo facing up e Insert the wireless transmitter so that the Y marks are aligned Do not insert other than the wireless transmitter into the EZW T 100 slot 3 Use the screws that you removed from step 1 to fasten the wireless transmitter Note Do not use other screws to fasten the wireless transmitter To insert the wireless transceiver into the S AIR sub unit For details on installing the wireless transceiver into the surround amplifier and S AIR receiver refer to the operating instructions supplied with the surround amplifier and S AIR receiver 53 GB suoijeiado 19410 Establishing sound transmission between the S AIR main unit and S AIR sub unit ID setting When you match the ID of the S AIR main unit and the S AIR sub unit you can establish sound transmission You can use multiple S AIR products by setting a different ID for each unit SOUND FIELD 5 G78 2 65 E wel AMP MENU AMP C Co oe MENU S B PRETURNEXIT MENUIHOME TCH WCH PRESET PRESET tsi TUNING TUNING To set the ID of the S AIR main unit Press
85. wire antenna supplied AM loop antenna supplied OIGO AUDIO IN AUDIO IN COAX IN TV VIDEO 2 The shape of the connector varies depending on the area code of this receiver Notes e To prevent noise pickup keep the AM loop antenna away from the receiver and other components e Be sure to fully extend the FM wire antenna e After connecting the FM wire antenna keep it as horizontal as possible 2158 payeys Burje5 6 Preparing the receiver and the remote Connecting the AC power cord mains lead Connect the AC power cord mains lead to a wall outlet AC power cord mains lead FRONTA FRONTL SURA SURL CENTER To the wall outlet Performing initial setup operations Before using the receiver for the first time initialize the receiver by performing the following procedure This procedure can also be used to return settings you have made to their factory defaults Be sure to use the buttons on the receiver for this operation 1 2 Press 1 to turn on the receiver 2 Hold down I for 5 seconds CLEARED appears All the settings you have changed or adjusted are reset to the initial settings 2268 Inserting batteries into the remote Insert two R6 size AA batteries in the RM AAU058 Remote Commander Observe the corr
86. y E x v Colour x v Colour is a more familiar term for the xvYCC standard proposed by Sony and is a trademark of Sony xvYCC is an international standard for colour space in video This standard can express a wider colour range than the currently used broadcast standard Precautions On safety Should any solid object or liquid fall into the cabinet unplug the receiver and have it checked by qualified personnel before operating it any further On power sources e Before operating the receiver check that the operating voltage is identical with your local power supply The operating voltage is indicated on the nameplate on the back of the receiver The unit is not disconnected from the AC power source mains as long as it is connected to the wall outlet even if the unit itself has been turned off If you are not going to use the receiver for a long time be sure to disconnect the receiver from the wall outlet To disconnect the AC power cord grasp the plug itself never pull the cord The AC power cord must be changed only at a qualified service shop On heat buildup Although the receiver heats up during operation this is not a malfunction If you continuously use this receiver at a large volume the cabinet temperature of the top side and bottom rises considerably To avoid burning yourself do not touch the cabinet On placement Place the receiver in a location with adequate ventilation to prevent heat buildu
87. y Synchro to ON before using the System Power Off function For details refer to the operating instructions supplied with the TV e Depending on the status the connected components may not be turned off For details refer to the operating instructions supplied with the connected components Using the Power Saving function Power Save You can reduce the receiver s power consumption when you connect a BRAVIA Sync compatible TV to this receiver during active standby mode if the TV is turned off and HDMI signal transmission is stopped pe AMP MENU GE GD Gia S TOOLS OPTIONS AMP MENU DISPLAY 4 4 4 gt RETURN EXIT MENU HOME WCH TVCH PRESET PRESET G Ee amp TUNING TUNING T Press AMP MENU SET HDMI appears on the display Press or to enter the menu Press repeatedly to select P SAVE then press or gt N Press repeatedly to select the setting then press or e SAVE ON Reduces power consumption in standby mode HDMI signal transmission occurs only when the TV is on e SAVE OFF No reduction HDMI signal transmission occurs continuously D Press AMP MENU The AMP MENU turns off Notes The power saving function may not work for some TVs compatible with the BRAVIA Sync In this case set P SA VE to SAVE OFF e Depending on your components it may take time before image or sound is outp

Sony 4-115-568-11(1) Flat Panel Television User Manual

Contents

Download Pdf Manuals

Related Search

Related Contents