Sony 3-298-969-11(1) Flat Panel Television User Manual
Contents
1. 7 QO 8 D 17 16 13 0 9 OOO 2 Ti e 0 PROG E v ik E 8 SONY 6 PROG In TV mode Press to select the next or DD previous channel In Analogue Text mode Press to select the next 65 or previous 7 page Z Press to adjust the volume Volume 8 IX Mute Press to mute the sound Press again to restore the 10 sound n standby mode if you want to turn on the TV without sound press this button 15 14 9 5 G Input In TV mode Press to display a list of equipment select Text connected to the TV page 23 hold In Analogue Text mode Press to hold the current page 10 TOOLS Press to display a list that contains PAP page 23 PIP page 23 Device Control or shortcuts to some setting menus page 26 Use the Device Control menu to operate equipment that is compatible with control for HDMI The listed options vary depending on the input source and screen format 11 Text Press to display text information page 16 12 G Info In digital mode Displays details of the Text reveal programme currently being viewed In analogue mode Displays information such as current channel number and screen format In Analogue Text mode pag2. Hue Increases or decreases the green tones and red tones f Hue can be adjusted only for the NTSC colour signal e g U S A video tapes Colour Temperature Adjusts the whiteness of the picture Cool Gives white colours a blue tint Neutral Gives white colours a neutral tint Warm 1 Warm 2 Gives white colours a red tint Warm 2 gives a redder tint than Warm 1 v Warm 1 and Warm 2 are not available when Picture Mode is set to Vivid Sharpness Sharpens or softens the picture Noise Reduction Reduces the noise level of pictures snowy pictures when the broadcast signal is weak Auto Automatically reduces picture noise in analogue TV mode only High Medium Modifies the effect of the noise reduction Low Off Turns off the Noise Reduction MPEG Noise Reduction Reduces picture noise in MPEG compressed videos 26 GB Advanced Seitings Allows you to set Picture settings in more detail These settings are not available when Picture Mode is set to Vivid Adv Contrast Automatically adjusts Backlight and Contrast to the most Enhancer suitable settings judging from the brightness of the screen This setting is especially effective for dark images scenes and will increase the contrast distinction of the darker picture scenes Live Colour Makes colours more vivid Sound Sound Effec
3. nuayy Manual Programme Press 4 4 to select the programme number you want to manually tune if tuning a Preset recorder select channel 00 then press System Channel 1 Press 4 9 to select System then press 2 Press 4 9 to select one of the following TV broadcast systems then press RETURN B G For western European countries areas I For the United Kingdom D K For eastern European countries areas L For France Press 9 9 to select Channel then press 4 Press 4 to select S for cable channels or C for terrestrial channels then press gt f S is not available when United Kingdom is selected for Country page 7 5 Tune the channels as follows If you do not know the channel number frequency Press 4 9 to search for the next available channel The search stops when a channel is found To continue searching press 4 9 If you know the channel number frequency Press the number buttons to enter the channel number of the broadcast you want to tune or the channel number of your recorder 6 Press to jump to Confirm then press Repeat the above procedure to preset other channels manually Label Assigns a name of your choice up to five letters or numbers to the selected channel This name appears briefly on the screen when you select the channel AFT Allows you to fine tune the selected channel manually if you feel that a slight tuning adj
4. To change your PIN 1 Press the number buttons to enter your PIN code 2 Press the number buttons to enter a new PIN code 3 Press RETURN PIN code 9999 is always accepted Technical Set up Auto Service Enables the TV to detect and store new Update digital services as they become available Software Enables the TV to automatically receive Download free software updates through your existing aerial cable when issued We recommend that you leave the setting to On at all times System Displays the current software version and Information the signal level Time Zone Allows you to manually select the time zone you are in if it is not the same as the default time zone setting for your country area Auto DST Sets whether or not to automatically switch between summer time and winter time Off Displays the time according to the time difference set in Time Zone On Automatically switches between summer time and winter time according to the calendar CA Module Set up Provides access to a pay TV service after you obtain a Conditional Access Module CAM and a view card See page 22 for the location of the 5 PCMCIA socket 34 Additional Information Specifications Model name KDL 40S40xx KDL 40V4000 KDL 46V4000 KDL 52V4000 40U40xx 40V42xx 46V42xx 52V42xx System Panel system LCD Liquid Crystal Display Panel TV system Analogue
5. When connecting an audio system be sure to also connect the DIGITAL AUDIO OUT OPTICAL socket of the TV and the audio system using an optical audio cable except for KDL 40S40xx 40U40xx For details see page 21 2465 To make the control for HDMI settings The control for HDMI settings must be set on both the TV side and connected equipment side See HDMI Set up on page 30 for the TV side settings For settings on the connected equipment refer to the operating instructions for that equipment Using Menu Functions Navigating through menus Menu functions allow you to enjoy various convenient features of this TV You can easily select channels or input sources and change the settings for your TV 1 Press MENU 2 Press 4 9 to select an option then press Q To exit the menu press MENU Digital Favourites Displays the Favourite list page 20 Analogue Returns to the last viewed analogue channel Digital Returns to the last viewed digital channel Digital EPG Displavs the Digital Electronic Programme Guide EPG page 18 External Inputs Displays a list of equipment connected to the TV To view pictures from an external input select the input source then press To select the equipment that is compatible with control for HDMI select HDMI Device Selection Q Settings Displays the Settings menu where most of the advanced settings and adjustments are perf
6. environments or situations such as those listed below or the TV set may malfunction and cause a fire electrical shock damage and or injuries Location Outdoors in direct sunlight at the seashore on a ship or other vessel inside a vehicle in medical institutions unstable locations near water rain moisture or smoke Environment Places that are hot humid or excessively dusty where insects may enter where it might be exposed to mechanical vibration near flammable objects candles etc The TV set shall not be exposed to dripping or splashing and no objects filled with liquids such as vases shall be placed on the TV Situation Do not use when your hands are wet with the cabinet removed or with attachments not recommended by the manufacturer Disconnect the TV set from mains socket and aerial during lightning storms Broken pieces O Do not throw anything at the TV set The screen glass may break by the impact and cause serious injury O If the surface of the TV set cracks do not touch it until you have unplugged the mains lead Otherwise electric shock may result When not in use O If you will not be using the TV set for several days the TV set should be disconnected from the mains for environmental and safety reasons As the TV set is not disconnected from the mains when the TV set is just turned off pull the plug from the mains to disconnect the TV set completely However some TV sets may hav
7. three to five years for normal use one to two years when used at the seaside The picture is distorted dotted lines or stripes appear Keep the TV away from electrical noise sources such as cars motorcycles hair dryers or optical equipment When installing optional equipment leave some space between the optional equipment and the TV Check the aerial cable connection Keep the aerial cable TV cable away from other connecting cables There is picture or sound noise when viewing a TV channel Adjust AFT Automatic Fine Tuning to obtain better picture reception page 32 Tiny black points and or bright points appear on the screen The screen is composed of pixels Tiny black points and or bright points pixels on the screen do not indicate a malfunction The picture contours are distorted Select Auto in Film Mode page 28 The picture is not displayed in colour Select Reset page 26 The picture from equipment connected to the COMPONENT IN sockets is not displayed in colour or is displayed in irregular colours Check the connection of the COMPONENT IN sockets and check if the sockets are firmly seated in their respective sockets Continued 37 uojgeunoju g Condition Explanation Solution Sound The picture is good but there Press 4 or IX Mute is no sound Check if the Speak
8. Belgi Belgique Luxembourg France Schweiz Suisse Svizzera Previous If you want to change the order of analogue channels follow the steps in Programme Sorting on page 31 If your TV cannot receive digital broadcasts the Clock Set menu appears on the screen page 28 amp Location Analogue BS Quick start Analogue Do you want to enable Quick Start TV turns on more quickly but standby power consumption is increased Select Auto Tuning Analogue Do you want to start Auto Tuning Control for HDMI Analogue Do you want to enable control for compatible HDMI devices Make sure that the aerial is connected Digital Auto Tuning Digital Analogue Please choose your TV connection Set up complete When you select Cable we recommend that you select Quick Scan for quick tuning Set Frequency and Network ID according to the information supplied from your cable provider If no channel is found using Quick Scan try Full Scan though it may take some time For a list of compatible cable providers refer to the support web site http support sonv europe com TV DVBC 798 Adjusting the viewing angle of the TV except for KDL 40U40xx This TV can be adjusted within the angles shown below Adjust the angle left and right swivel Top view Front 868
9. Depending on your country area selection B G H D K L I Digital DVB T DVB C Colour video system Analogue PAL SECAM NTSC 3 58 4 43 only video input Digital MPEG 2 MP ML HL Channel coverage Analogue VHF E2 E12 UHF E21 E69 CATV S1 S20 HYPER S21 S41 D K R1 R12 R21 R69 L F2 F10 B Q F21 F69 I B21 B69 Digital VHF UHF Sound output 10W 10W Input Output jacks Aerial cable 75 ohm external terminal for VHF UHF G AVI 21 pin scart connector CENELEC standard including audio video input RGB input and TV audio video output 2 23 8 3AV2 21 pin scart connector CENELEC standard including audio video input RGB input S video input SmartLink selectable audio video output and SmartLink interface lt COMPONENT IN Supported formats 1080p 1080i 720p 576p 576i 480p 480i Y 1 Vp p 75 ohms 0 3V negative 0 7 Vp p 75 ohms PR Cn 0 7 Vp p 75 ohms COMPONENT IN Audio input phono jacks HDMIIN 1 2 3 Video 1080 24p 1080p 1080i 720p 576p 576i 480p 480i Audio Two channel linear PCM 32 44 1 and 48 kHz 16 20 and 24 bits Analogue audio input phono jacks HDMI IN 2 only PC Input see page 36 SJAV3 Video input phono jack AV3 Audio input phono jacks G DIGITAL AUDIO OUT OPTICAL except for KDL Digital optical jack 40540 40040 G Audio output phono jacks PC IN PC Input D sub 15 pin see page
10. Detaching the Table Top Stand from the TV f Remove the screws guided by the arrow marks 4 of the TV Do not remove the Table Top Stand for any reason other than to wall mount the TV KDL 52V4000 52V42xx 46V4000 46V42xx 40V4000 40V42xx KDL 40S40xx 40U40xx Safety Information Installation Set up Install and use the TV set in accordance with the instructions below in order to avoid any risk of fire electrical shock or damage and or injuries Installation O The TV set should be installed near an easily accessible mains socket Place the TV set on a stable level surface m O Only qualified service personnel should carry out wall installations m For safety reasons it is strongly recommended that you use Sony accessories including KDL 52V4000 52V42xx Wall mount bracket SU WL500 KDL 46V4000 46V42xx 40V 4000 40 V 42xx A0S 40xx 40U40xx Wall mount bracket SU WL500 TV stand SU FL300M O Be sure to use the screws supplied with the Wall mount bracket when attaching the mounting hooks to the TV set The supplied screws are designed so that they are 8 mm to 12 mm in length when measured from the attaching surface of the mounting hook The diameter and length of the screws differ depending on the Wall mount bracket model Use of screws other than those supplied may result in internal damage to the TV set or cause it to fall etc 8 mm 12 Screw supplied with the Wall
11. Information page 9 Retain this manual for future reference ao O w Start up Guide 1 Checking the accessories 2 Attaching the stand Mains lead Type BF 1 except for KDL 52V4000 Stand 1 and screws 4 52V42xx Remote RM ED013 1 1 Size AA batteries R6 type 2 Do not remove the ferrite cores To insert batteries into the remote Push and lift the cover to open If using an electric screwdriver set the tightening torque at approximately 1 5 N m 15 kgf cm 3 Connecting an aerial Set Top Box recorder e g DVD recorder Connecting a Set Top Box recorder e g DVD recorder with SCART Set Top Box recorder e g DVD recorder Connecting a Set Top Box recorder e g DVD recorder with HDMI 2 ou AE Set Top Box recorder e g DVD recorder 5 GB apind 4 Preventing the TV from 5 Bundling the cables toppling over 6 Performing the initial set up 1 Install a wood screw 4 mm in diameter not supplied in the TV stand 2 Installa machine screw 5 12 not supplied into the screw hole of the TV Tie the wood screw and the machine screw with a strong cord fan Country Analogue Programme Sorting Analogue Select country Prog Label Enter Programme number o2 53 54 o4 css o5 cse o 57 o7 58 os cso Ireland Nederland
12. and up to 5 equipment items can be connected to a single socket Be sure to update the HDMI Device List when you change the connections or settings If the specific Sony equipment that is compatible with control for HDMI is connected this setting is applied to the connected equipment automatically when the Device List Update is executed on the TV HDMI Device List Displays a list of connected equipment that is compatible with control for HDMI You cannot use Control for HDMI if the TV operations are linked to the operations of an audio system that is compatible with control for HDMI Product Information Displays product information of the TV All Reset Resets all settings to factory settings and displays the Auto Start up screen f e Do not turn off the TV or press any buttons during Reset takes about 30 seconds Settings for the Digital Favourites lists country area language and auto tuned channels will also be reset to factory settings Analogue Set up Auto Tuning Tunes in all the available analogue channels You can retune the TV after moving house or to search for newly launched channels Programme Sorting Changes the order of analogue channels stored in the TV 1 Press 9 9 to select the channel you want to move to a new position then press Q 2 Press 4 9 to select the new position for the channel then press C Continued 3168
13. is compatible with SmartLink Once a recording has begun you can switch the TV to standby mode but do not turn off the TV completely or the recording will be cancelled f an age restriction has been set to programmes a message asking for a PIN code appears on the screen For details see Parental Lock on page 34 AL 1965 Using the Digital Favourite List M3 Digital Favourite List EUER R You can specify up to four of your favourite channel lists 1 In digital mode press Q 2 Perform the desired operation as shown in the following table or displayed on the screen This function may not be available in some countries areas To Do this Create a Favourite list for the first 1 Press to select Yes time 2 Press the yellow button to select the Favourite list Press 4 9 to select the channel you want to add then press A symbol appears next to channels that you have stored in the Favourite list Watch a channel 1 Press the yellow button to select a Favourite list 2 Press 9 9 to selecta channel then press Add or remove channels in a 1 Press the blue button Favourite list 2 Press the yellow button to select the Favourite list to edit 3 Press 4 9 to select the channel to add or remove then press Remove all channels from a Favourite 1 Press the blue button list 2 Press the yellow button to select the Favourite list to edit 3 Pres
14. mount bracket Mounting Hook Hook attachment on rear of TV set Transporting O Before transporting the TV set disconnect all cables O Twoorthree people are needed to transport a large TV set O When transporting the TV set by hand hold it as shown on the right Do not put stress on the LCD panel O When lifting or moving the TV set hold it firmly from the bottom O When transporting the TV set do not subject it to jolts or excessive vibration O When transporting the TV set KA 7 for repairs or when moving sure to hold the bottom of pack it using the original the panel not the front part carton and packing material Do not handle with dent area Do not handle with the transparent bottom part Ventilation m m m 10 cm Never cover the ventilation holes or insert anything in the cabinet Leave space around the TV set as shown below It is strongly recommended that you use a Sony wall mount bracket in order to provide adequate air circulation Installed on the wall 30 cm 10 cm 10 10 Leave least this space around the set Installed with stand 30 cm Leave at least this space around the set To ensure proper ventilation and prevent the collection of dirt or dust Do notlay the TV set flat install upside down backwards or sideways not place the TV set on a shelf rug bed or in a closet
15. not cover the TV set with a cloth such as curtains or items such as newspapers etc Do not install the TV set as shown below Air circulation is blocked BN Mains lead Handle the mains lead and socket as follows in order to avoid any risk of fire electrical shock or damage and or injuries Use only Sony mains leads not those of other brands Insert the plug fully into the mains socket Operate the TV set on a 220 240 V AC supply only When wiring cables be sure to unplug the mains lead for your safety and take care not to catch your feet on the cables Disconnect the mains lead from the mains socket before working on or moving the TV set Keep the mains lead away from heat sources Unplug the mains plug and clean it regularly If the plug is covered with dust and it picks up moisture its insulation may deteriorate which could result in a fire Notes m m Do not use the supplied mains lead on any other equipment Do not pinch bend or twist the mains lead excessively The core conductors may be exposed or broken Continued 998 Do not modify the mains lead Do not put anything heavy on the mains lead Do not pull on the mains lead itself when disconnecting the mains lead Do not connect too many appliances to the same mains socket Do not use a poor fitting mains socket OO 000 Prohibited Usage Do not install use the TV set in locations
16. 36 G 0 7 Vp p 75 ohms non Sync on Green B 0 7 Vp p 75 ohms R 0 7 Vp p 75 ohms HD 1 5 Vp p VD 1 5 Vp p PC audio input minijack m Headphones jack CAM Conditional Access Module slot Power and others Power requirements 220 V 240 V AC 50 Hz Screen size measured 40 inches Approx 40 inches Approx 46 inches Approx 52 inches Approx diagonally 101 6 cm 101 6 cm 116 8 cm 132 2 em Display resolution 1 920 dots horizontal x 1 080 lines vertical Power in 175 W 175 W 215 W 222 W consumption Standard mode in 197 W 197 W 238 W 249 W Vivid mode Standby power consumption 0 19 W Continued 3568 uomneunojuj jeuoni ppi Model name KDL 40S40xx KDL 40V4000 KDL 46V4000 KDL 52V4000 40U40xx 40V42xx 46V42xx 52V42xx Dimensions with Table Top 99 7 x 69 1 27 9 98 6 x 68 4 27 9cm 112 0 x 78 2 x 30 7 cm 126 2 x 87 1 x 34 7 cm Approx Stand wxhxd without Table 997x644x110em 986x646x1l0cm 1120x742x1L5cm 1262x829 x 11 9 cm Top Stand Mass with Table Top 23 0 kg 21 5 kg 29 0 kg 38 0 kg Approx Stand without Table 20 0 kg 18 5 kg 25 0kg 32 0 kg Top Stand Supplied accessories See 1 Checking the accessories on page 4 SU WL500 Wall Mount Bracket SU FL300M TV stand SU WL500 Wall Optional accessories Mount Bracket Specified st
17. Additional operations To Do this Access the Press Programme index To select an analogue table in analogue channel press amp Y 1 Press D on the TV to turn on the TV mode only then press When the TV is in standby mode the d Access the Digital Press Q standby indicator on the TV front panel Favourites in For details see page 20 is red press I D the remote to turn on digital mode only the TV 2 Press DIGITAL to switch to digital mode To access Digital Text or press ANALOG to switch to analogue Many broadcasters provide a Digital Text mode service Digital Text offers graphically rich contents compared to Analogue Text Select a digital channel which provides Digital Text then press When a broadcaster provides a dedicated Digital Text channel select this channel to access Digital Text The available channels vary depending on the mode 1665 To navigate through Digital Text follow the instructions on the screen To exit Digital Text press RETURN To move around press 6 9 4 9 To select items press and the number buttons To access shortcuts press the coloured buttons To access Analogue Text In analogue mode press 69 Each time you press G3 the display changes cyclically as follows Text Text and TV picture No Text exit the Text service To select a page press the number buttons or D To hold a page press To reveal hidden informati
18. SON Y LCD Digital Colour TV Operating Instructions KDL 52V4000 52V42xx KDL 46V4000 46V42xx KDL 40V4000 40V42xx KDL 40S40xx 40U40xx BRAVIA 2008 Sony Corporation 3 298 969 11 1 NOTICE FOR CUSTOMERS IN THE UNITED KINGDOM A moulded plug complying with BS1363 is fitted to this equipment for your safety and convenience Should the fuse in the plug supplied need to be replaced with the same rating of fuse approved by ASTA or BSI to BS 1362 i e marked with or Y must be used When an alternative type of plug is used it should be fitted with the same rating of fuse otherwise the circuit should be protected by a 13 AMP FUSE at the distribution board If the plug supplied with this equipment has a detachable fuse cover be sure to attach the fuse cover after you change the fuse Never use the plug without the fuse cover If you should lose the fuse cover please contact your nearest Sony service station How to replace the fuse Open the fuse compartment with a blade screwdriver and replace the fuse Please refer to the illustration that actually equiped with the product Introduction Thank you for choosing this Sony product Before operating the TV please read this manual thoroughly and retain it for future reference Notes on Digital TV function O Functions related to Digital TV D 3 will work only in countries or areas where a compatible DVB C MPEG2 cable service is available Confi
19. Sync compatible equipment that is connected to the TV SYNC MENU Displays the menu of connected HDMI equipment While viewing other input screens or TV programmes HDMI Device Selection is displayed when the button is pressed THEATRE You can set Theatre Mode on or off When Theatre Mode is set to on the optimum audio output if the TV is connected with an audio system using an HDMI cable and picture quality for film based contents are automatically set If you turn the TV off Theatre Mode is also turned off f Control for HDMI BRAVIA Sync is only available with the connected Sony equipment that has the BRAVIA Sync logo or is compatible with control for HDMI Indicators KDL 52V4000 52V42xx 46V4000 46V42xx 40V4000 40V42xx KDL 40S40xx 40U40xx Indicator Description 1 5 Picture Lights up in green when you select Picture Off page 28 Off Timer Lights up in orange when you set the timer page 28 2 d Standby Lights up in red when the TV is in standby mode 3 199 Power Lights up in green when the TV is on Timer REC Lights up in orange when you have set the timer recording page 18 Lights up in red during timer recording 4 Remote control Receives IR signals from the remote sensor Do not put anything over the sensor The sensor may not operate
20. adcast Stereo Mono For stereo broadcasts A B Mono For bilingual broadcasts select A for sound channel 1 B for sound channel 2 or Mono for mono channel if available f For other equipment connected to the TV set Dual Sound to Stereo A or When you connect an external equipment to the HDMI socket Dual Sound is automatically set to Stereo except when using the audio in sockets 2768 Features Quick Start The TV turns on faster than usual within two hours after switching to standby mode However power consumption in standby mode is higher than usual Power Saving Reduces power consumption of the TV by adjusting the backlight When you select Picture the picture is switched off and the amp Picture Off indicator on the TV front panel lights up in green The sound remains unchanged Film Mode Provides improved picture movement when playing DVD or VCR images taken on film reducing picture blur and graininess Auto Provides smoother picture movement than the original film based content Use this setting for standard use Off Turns off the Film Mode If the image contains irregular signals or too much noise Film Mode is automatically turned off even if Auto is selected Video Photo Sets the image quality setting most suited to the input source video or photograph data Video A Sets suitable i
21. al 28958 Set up Auto Start up You can run the initial set up that appeared when you first connected the TV page 6 and select the language country area and tune in all available channels again Even if you have made the settings when you first connected the TV you may need to change the settings after moving house or to search for newly launched channels Language Sets the language displayed on the menu screens Screen Settings Screen Format See To change the screen format manually on page 17 Auto Format Automatically changes the screen format to match the broadcast signal If you want to use the setting that you specified in Screen Format select Off Display Area Adjusts the picture display area in 1080i p and 720p sources when Screen Format is set to Wide Auto During digital broadcasts displays pictures in accordance with the settings recommended by the broadcast station Full Pixel Displays the original picture area Normal Displays pictures in their recommended size Horizontal Shift Adjusts the horizontal position of the picture Vertical Shift Adjusts the vertical position of the picture when Screen Format is set to Smart Zoom or 14 9 f Vertical Shift is not available when Display Area is set to Full Pixel nuayy Vertical Size Adjusts the ver
22. andby power is reached after the TV finishes necessary internal processes Design and specifications are subject to change without notice PC input signal reference chart for PC Resolution Signals Horizontal x Vertical Horizontal Vertical Standard Pixel Line frequency kHz frequency Hz VGA 640 x 480 31 5 60 VESA 640 x 480 37 5 75 VESA 720 x 400 31 5 70 VGA T SVGA 800 x 600 37 9 60 VESA Guidelines 800 x 600 46 9 75 VESA XGA 1024 x 768 48 4 60 VESA Guidelines 1024 x 768 56 5 70 VESA 1024 x 768 60 0 75 VESA WXGA 1280 x 768 47 4 60 VESA 1280 x 768 47 8 60 VESA 1280 x 768 60 3 75 1360 x 768 47 7 60 VESA SXGA 1280 x 1024 64 0 60 VESA f This TV s PC input does not support Sync on Green or Composite Sync This TV s PC input does not support interlaced signals This TV s PC input supports signals in the above chart with a 60 Hz vertical frequency For other signals you will see the message NO SYNC PC input signal reference chart for HDMI IN 1 2 3 Resolution Signals Horizontal x Vertical Horizontal Vertical Standard Pixel Line frequency kHz frequency Hz VGA 640 x 480 31 5 60 VESA SVGA 800 x 600 37 9 60 VESA Guidelines XGA 1024 x 768 48 4 60 VESA Guidelines WXGA 1280 x 768 47 4 60 VESA WXGA 1280 x 768 47 8 60 VESA SXGA 1280 x 1024 64 0 60 VESA 36 98 Troubleshooting Check whether the 5 s
23. cket EJ Headphones You can listen to TV sound through headphones 2268 Viewing Pictures from Connected Equipment Turn on the connected equipment and perform one of the following operations For equipment connected to the scart sockets using a fully wired 21 pin scart lead Start playback on the connected equipment The picture from the connected equipment appears on the screen For an auto tuned recorder In analogue mode press PROG 4 or the number buttons to select the video channel For other connected equipment Press amp to display a list of connected equipment Press 4 to select the desired input source then press The highlighted item is automatically selected if you do not perform any operation for two seconds after pressing If you have set an input source to Skip in the AV Preset menu page 30 that input source does not appear in the list To return to normal TV mode press DIGITAL or ANALOG To view two pictures simultaneously PAP Picture and Picture You can view two pictures external input and TV programme on the screen simultaneously Connect an optional equipment page 21 and make sure that images from the equipment appear on the screen page 23 f This function is not available for a PC input source You cannot change the size of the pictures You cannot display analogue TV video in the TV programme picture whi
24. e 17 Reveals hidden information e g answers to a quiz 13 GUIDE Press to display the Digital Electronic EPG Programme Guide EPG page 18 14 lt Favourite Press to display the Digital Favourite List that you have specified page 20 15 Coloured When the coloured buttons are available an buttons operation guide appears on the screen Follow the operation guide to perform a selected operation page 17 18 20 16 DIGITAL Press to display the digital channel that was last viewed 17 ANALOG Press to display the analogue channel that was last viewed Continued 1368 20 1465 G9 BRAVIA Syn SYNC MENU 18 Number buttons In TV mode Press to select channels For channel numbers 10 and above press the second and third digits in quick succession In Analogue Text mode Press to enter a page number C 23 21 22 18 19 19 C Previous Press to return to the channel that was last viewed channel for more than five seconds 00 ei Screen Press to change the screen format page 17 mode 21 Subtitle Press to display the Subtitle Setting menu setting page 33 in digital mode only 22 AUDIO In analogue mode Press to change the dual sound mode page 27 In digital mode Press to display the Audio Language menu page 33 23 BRAVIA A IE You can operate the Sync BRAVIA
25. e features that require the TV set to be left in standby to work correctly For children O Do not allow children to climb on the TV set O Keep small accessories out of the reach of children so that they are not mistakenly swallowed If the following problems occur Turn off the TV set and unplug the mains lead immediately if any of the following problems occur Ask your dealer or Sony service centre to have it checked by qualified service personnel When Mains lead is damaged Poor fitting of mains socket TV set is damaged by being dropped hit or having something thrown at it Any liquid or solid object falls through openings in the cabinet 1065 Precautions Viewing the TV m View the TV in moderate light as viewing the TV in poor light or during long period of time strains your eyes When using headphones adjust the volume so as to avoid excessive levels as hearing damage may result CD Screen Although the LCD screen is made with high precision technology and 99 99 or more of the pixels are effective black dots may appear or bright points of light red blue or green may appear constantly on the LCD screen This is a structural property of the LCD screen and is not a malfunction Do not push or scratch the front filter or place objects on top of this TV set The image may be uneven or the LCD screen may be damaged If this TV set is used in a c
26. er is set to TV Speaker page 30 When using HDMI input with Super Audio CD or DVD Audio DIGITAL AUDIO OUT OPTICAL may not output audio signals Channels You cannot select your desired channel Switch between digital and analogue mode and select the desired digital analogue channel Some channels are blank The channel is for scrambled subscription service only Subscribe to a pay TV service The channel is used only for data no picture or sound Contact the broadcaster for transmission details You cannot view digital Contact a local installer to find out if digital transmissions are provided channels in your area Upgrade to a higher gain aerial General The TV turns off Check if the Sleep Timer is activated or confirm the Duration automatically the TV enters setting of On Timer Settings page 28 standby mode If no signal is received and no operation is performed in the TV mode for 10 minutes the TV automatically switches to standby mode The TV turns on Check if the On Timer Settings is activated page 28 automatically Some input sources cannot be selected Select AV Preset and cancel the Skip setting for the input source page 30 The remote does not function Replace the batteries You cannot add a channel to the Favourite list Up to 999 channels can be stored in the Favourite list HDMI equipment does no
27. facturer of this product is Sony Corporation 1 7 1 Konan Minato ku Tokyo 108 0075 Japan The Authorized Representative for EMC and product safety is Sony Deutschland GmbH Hedelfinger Strasse 61 70327 Stuttgart Germany For any service or guarantee matters please refer to the addresses given in separate service or guarantee documents 11 Remote Control and TV Controls Indicators Remote control and TV controls i 3l s 7 6 2 meni 2 PROG Buttons TV will work same as those remote control In TV menu these buttons will work as 4 V lt a q gt e The number 5 B PROG and AUDIO buttons have a tactile dot Use the tactile dots as a reference when operating the TV Button Description 1 TV standbv Press to turn the TV on and off from standbv mode 2 Power Press to turn the TV on or off f To disconnect the TV completely turn off the TV then unplug the mains lead from the mains c BY Kaje 1G Press 6 9 4 P to move the on screen cursor Press C9 to select confirm the highlighted item MENU Press to display the TV menu page 25 ol e RETURN Press to return to previous screen of the displayed menu 1266
28. ing impaired are displayed with the subtitles when such visual aids are available Subtitle Allows you to select the language of the Language subtitles Audio Set up Audio Type Switches to broadcast for the hearing impaired when you select For Hard Of Hearing Audio Sets the language to be used for a Language programme Some digital channels may broadcast several audio languages for a programme Continued 33 Audio Provides audio description narration of Description visual information when such information is available Mixing Level Adjusts the TV main audio and Audio Description output levels Radio Display Displays the screen wallpaper when you listen to a radio broadcast You can select the screen wallpaper colour or display a random colour To cancel the screen wallpaper display temporarily press any button Parental Lock Sets an age restriction to viewing or recording programmes To view or record any programme rated for ages above the age you specify enter the correct PIN code Press the number buttons to enter your PIN code If you have not already set a PIN code a PIN code entry screen appears Follow the instructions in PIN Code below 2 Press 4 9 to select an age restriction or None for unrestricted watching then press 3 Press RETURN PIN Code To set a PIN for the first time 1 Press the number buttons to enter a PIN code 2 Press RETURN
29. ipment Uses preset labels to assign a name to labels connected equipment Edit Allows you to create your own label Press 4 to select the desired letter or number then press gt Repeat this step until you complete the name then select OK and press Skip Skips unnecessary input sources AV2 Input Sets a signal to be input from the C2 3 s 3AV2 socket Usually set to Auto However depending on the connected equipment the signal may not be correctly detected even though Auto is selected If the video from the equipment connected to the C9 3 S 3AV2 socket is not displayed correctly select Composite S Video or RGB for the signal of the connected equipment AV2 Output Sets a signal to be output to the C9 3 S 3AV2 socket If you connect a recorder or other recording equipment to the 2 amp 3 8 3AV2 socket you can record the output signal from other equipment connected to the TV TV Outputs TV broadcasts Auto Outputs whatever is being viewed on the screen except signals from the DCOMPONENT IN HDMI IN 1 HDMI IN 2 HDMI IN 3 and 2 IN sockets Speaker TV Speaker Turns on and outputs the TV s sound from the TV speakers Audio System Turns off the TV speakers and outputs the TV s sound from external audio equipment connected to the audio output sockets on the TV You can also turn on the connected equipment that is compatible with control for HDMI after making
30. le displaying AV1 AV2 or AV3 video in the external inputs picture The TV outputs the analogue TV s sound 1 Press TOOLS Press 4 to select then press The picture from the connected equipment is displayed on the left and the TV programme is displayed on the right Press the number buttons or PROG 4 to select the TV channel To return to single picture mode Press or RETURN The picture framed in green is audible You can switch the audible picture by pressing 4 9 To view two pictures simultaneously PIP Picture in Picture You can view two pictures PC input and TV programme on the screen simultaneously Connect a PC page 21 and make sure that images from the PC appear on the screen f Power Management page 29 is not available in PIP mode 1 Press TOOLS Press 4 to select PIP then press The picture from the connected PC is displayed in full size and the TV programme is displayed in the small screen You can use 9 3 c to change the position of the TV programme screen 3 Press the number buttons or PROG 4 to select a TV channel To return to single picture mode Press RETURN You can switch the audible picture by selecting Audio Swap from the Tools menu 23 jeuondo bulsn Using BRAVIA Sync Control for HDMI The control for HDMI function enables the TV to communicate with the connected equipme
31. local Civic Office your household waste disposal service or the shop where you purchased the product Disposal of waste batteries applicable in the European Union and other European countries with separate Pb collection systems This symbol on the battery or on the packaging indicates that the battery provided with this product shall not be treated as household waste By ensuring these batteries are disposed of correctly you will help prevent potentially negative consequences for the environment and human health which could otherwise be caused by inappropriate waste handling of the battery The recycling of the materials will help to conserve natural resources In case of products that for safety performance or data integrity reasons require a permanent connection with an incorporated battery this battery should be replaced by qualified service staff only To ensure that the battery will be treated properly hand over the product at end of life to the applicable collection point for the recycling of electrical and electronic equipment For all other batteries please view the section on how to remove the battery from the product safely Hand the battery over to the applicable collection point for the recycling of waste batteries For more detailed information about recycling of this product or battery please contact your local Civic Office your household waste disposal service or the shop where you purchased the product The manu
32. mage quality depending on the input source video data or photograph data when directly connecting Sony HDMI output capable equipment that supports Video A mode Video Produces suitable image quality for moving pictures Photo Produces suitable image quality for still images f f the connected equipment does not support Video A mode the setting is automatically set to Video even if you select Video A Video Photo is available only for HDMI or component input source 1080p and 1080i Timer Settings Sleep Timer Sets the TV to automatically switch to standby mode after a certain amount of time When Sleep Timer is activated Timer indicator on the TV front panel lights up in orange When you turn off the TV and turn it on again Sleep Timer is reset to Off A notification message appears on the screen one minute before the TV switches to standby mode On Timer On Timer Sets the TV to automatically turn on from Settings standby mode Timer Mode Set the day you want the timer to turn on the TV Time Set the time you want the timer to turn on the TV Duration Set how long you want the TV to stay on before switching to standby mode again Clock Set Allows you to adjust the clock manually When the TV is receiving digital channels you cannot adjust the clock manually because the clock automatically receives the time code from the broadcast sign
33. nt that is compatible with the function using HDMI CEC Consumer Electronics Control For example by connecting Sony equipment that is compatible with control for HDMI with HDMI cables you can control them together Be sure to connect the equipment correctly and make the necessary settings Control for HDMI e Automatically turns the connected equipment off when you switch the TV to standby mode using the remote Automatically turns the TV on and switches the input to the connected equipment when the equipment starts to play e If you turn on a connected audio system while the TV is on the sound output switches from the TV speaker to the audio system Adjusts the volume 1 and mutes the sound EX of a connected audio system Youcan operate the connected Sony equipment that has the BRAVIA Sync logo by the TV remote by pressing Pp B I 4 to operate the connected equipment directly SYNC MENU to display the menu of the connected HDMI equipment on the screen After displaying the menu you can operate the menu screen by using 4 9 4 and CJ TOOLS to display Device Control then select options from Menu Options and Content List to operate the equipment Refer to the instruction manual of the equipment for available control To connect the equipment that is compatible with control for HDMI Connect the compatible equipment and the TV with an HDMI cable
34. of the KDL 40V4000 unless otherwise stated O The xx that appears on the model name corresponds to two numeric digits related to design or colour variation Table of Contents Start up Guide Safety Information ii ii iii ia eaan na anseres aeara cua Parara Lanea AN AEAEE EREE NSO rE ize qq H M se 10 Remote Control and TV Controls Indicators eese 12 Watching TV Watching TV JO 16 Using the Digital Electronic Programme Guide EPG DV 18 Using the Digital Favourite List M3 siincsccecetsesceesecccenerccseettcesiecstessicessescsaceeedscaeseeceetesdsnezuncueceess 20 Using Optional Equipment Connecting Optional Viewing Pictures from Connected Equipment esses enne nnne nnn 23 Using BRAVIA Sync Control for HDMI scenes nennen nennen nennen nannten nnn 24 Using Menu Functions Navigating through IESUS 26 Additional Information Specifications is sis E a Troubleshooting me 37 D3 for digital channels only Before operating the TV please read Safety
35. old place a smear may occur in the picture or the picture may become dark This does not indicate a failure These phenomena disappear as the temperature rises Ghosting may occur when still pictures are displayed continuously It may disappear after a few moments The screen and cabinet get warm when this TV set is in use This is not a malfunction The LCD screen contains a small amount of liquid crystal Some fluorescent tubes used in this TV set also contain mercury Follow your local ordinances and regulations for disposal Handling and cleaning the screen surface cabinet of the TV set Be sure to unplug the mains lead connected to the TV set from m ains socket before cleaning To avoid material degradation or screen coating degradation observe the following precautions m To remove dust from the screen surface cabinet wipe gently with a soft cloth If dust is persistent wipe with a soft cloth slightly moistened with a diluted mild detergent solution Never use any type of abrasive pad alkaline acid cleaner scouring powder or volatile solvent such as alcohol benzene thinner or insecticide Using such materials or maintaining prolonged contact with rubber or vinyl materials may result in damage to the screen surface and cabinet material When adjusting the angle of the TV set move it slowly so as to prevent the TV set from moving or slipping off from its table stand Optional Equipment Keep optional com
36. on press je When four coloured items appear at the bottom of the Text page you can access pages quickly and easily Fast Text Press the corresponding coloured button to access the page To change the screen format manually Press amp repeatedly to select the desired screen format Smart Displays conventional 4 3 broadcasts with an imitation wide screen effect The 4 3 picture is stretched to fill the screen Displays conventional 4 3 broadcasts e g non wide screen TV in the correct proportion Displays wide screen 16 9 broadcasts in the correct proportion Displays cinemascopic letter box format broadcasts in the correct proportion Displays 14 9 broadcasts in the correct proportion As a result black border areas are visible on the screen Parts of the top and bottom of the picture may be cut off You can adjust the vertical position of the picture Press 4 to move the picture up or down e g to read subtitles f When you select Smart some characters and or letters at the top and the bottom of the picture may not be visible In such a case adjust Vertical Size in the Screen Settings menu page 29 You cannot select 4 3 or 14 9 for HD signal source pictures When Auto Format page 29 is set to the TV automatically selects the best mode to suit the broadcast If 720
37. ormed 1 Press 9 9 to select a menu item then press 2 Press 2 to select an option or adjust a setting then press For details about settings see pages 26 to 34 f The options you can adjust vary depending on the situation Unavailable options are greyed out or not displayed This function may not be available in some countries areas 25658 nuejy TV Settings Menu Picture Picture Mode Sets a picture mode when displaying an input other than a PC The options for Picture Mode may differ depending on the Video Photo setting page 28 Vivid Shop see Enhances picture contrast and sharpness page 7 Standard Home see page 7 Cinema For standard pictures Recommended for home entertainment For viewing film based content Most suitable when viewing the TV in a theatre like environment Photo Sets the optimum picture quality for photographs Display Mode Sets a display mode when displaying a PC input Video Text For video images For text charts or tables Reset Resets all the Picture settings to the factory settings excluding Picture Mode and Display Mode Backlight Adjusts the brightness of the backlight Contrast Increases or decreases picture contrast Brightness Brightens or darkens the picture Colour Increases or decreases colour intensity
38. ove procedure even if the programme you want to record has already started Set a programme to be displayed automatically on the screen when it starts Reminder 1 2 f Press 4 S c to select a future programme you want to display then press Press 4 9 to select Reminder then press A symbol appears next to the programme s information The indicator on the TV front panel lights up in orange If you switch the TV to standby mode the TV will automatically turn on when the programme starts Set the time and date of a programme you want to record Manual timer REC ociRouz Press 13 Press 4 9 to select Manual timer REC then press Press 4 to select the date then press gt Set the start and stop time in the same way as in step 3 Press 6 9 to select the programme then press Press to set the timers on the TV and recorder The 28 indicator on the TV front panel lights up in orange 1865 To Do this Cancel a recording reminder 1 Press G9 Timer list Press 4 9 to select Timer list then press 2 3 Press 9 to select the programme you want to cancel then press Press 4 9 to select Cancel Timer then press A display appears to confirm that you want to cancel the programme 5 Press e to select Yes then press f You can set recorder timer recordings on the TV only when the connected recorder
39. p 1080i or 1080p source pictures are displayed with black borders on the screen edges select Smart or Zoom to adjust the pictures 17 AL Using the Digital Electronic Programme Guide EPG DV3 legorles Fi 16 Mar 11 35 E g EH 2 j 3 8 2 5 8 i 004 Channel 4 8 i BBEBBEBEBE Digital Electronic Programme Guide EPG 1 In digital mode press GUIDE 2 Perform the desired operation as shown in the following table or displayed on the screen This function may not be available in some countries areas To Do this View a programme Press 4 9 4 9 to select a programme then press Turn off the EPG Press GUIDE Sort programme information by category Category list 1 2 Press the blue button Press 6 9 4 9 to select a category then press The categories available include All Categories Contains all available channels Category name e g News Contains all channels corresponding to the selected category Set a programme to be recorded Timer REC i Press 6 9 4 2 to select the programme you want to record then press 9 Press 6 9 to select Timer REC Press C to set the timers on the TV and recorder A symbol in red appears next to the programme s information The 28 indicator on the TV front panel lights up in orange You can perform the ab
40. ponents or any equipment emitting electromagnetic radiation away from the TV set Otherwise picture di stortion and or noisy sound may occur Batteries Li Li m Observe the correct polarity when inserting batteries Do not use different types of batteries together or mix old and new batteries Dispose of batteries in an environmentally friendly way Certain regions may regulate the disposal of batteries Please consult your local authority Handle the remote with care Do not drop or step on it or spill liquid of any kind onto it Do not place the remote in a location near a heat source a place subject to direct sunlight or a damp room Disposal of the TV set Disposal of Old Electrical amp Electronic Equipment Applicable in the European Union and other European EE countries with separate collection systems This symbol on the product or on its packaging indicates that this product shall not be treated as household waste Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment By ensuring this product is disposed of correctly you will help prevent potential negative consequences for the environment and human health which could otherwise be caused by inappropriate waste handling of this product The recycling of materials will help to conserve natural resources For more detailed information about recycling of this product please contact your
41. properly f Make sure that the TV is completely turned off before unplugging the mains lead Unplugging the mains lead while the TV is turned on may cause the indicator to remain lit or may cause the TV to malfunction About the operation guide on the TV screen Analogue FET ES Operation Guide Example Press C2 or RETURN see 3 or 5 on page 12 The operation guide provides help on how to operate the TV using the remote and is displayed at the bottom of the screen Use the remote buttons shown on the operation guide 1565 Watching TV Press the number buttons or PROG 4 to Watching TV select a TV channel 1 o To select channel numbers 10 and above using the number buttons enter the second and third digits in quick succession To select a digital programme using the Digital Electronic Programme Guide EPG see page 18 In digital mode An information banner appears briefly The following icons may be indicated on the banner Go BRAVIA Sync Interactive service is available Digital Text fa Radio service Scrambled Subscription service Multiple audio languages available CJ Subtitles available g Subtitles available for the hearing impaired B Recommended minimum age for current programme ages from 4 to 18 a Parental lock in red Current programme is being recorded
42. rm with your local dealer whether the area you are in receives DVB T signals or ask your cable provider whether its DVB C cable service is compatible with this TV O Your cable provider may charge a fee for their services or require you to agree to its terms and conditions of business O This TV set complies with DVB T and DVB C specifications but compatibility with future DVB T digital terrestrial and DVB C digital cable broadcasts are not guaranteed O Some Digital TV functions may not be available in some countries areas and DVB C cable may not operate correctly with some providers 2 For a list of compatible cable providers refer to the support web site http support sonv europe com TV DVBC Trademark information is a registered trademark of the DVB Project Manufactured under license from BBE Sound Inc Licensed by BBE Sound Inc under one or more of the following US patents 5510752 5736897 BBE and BBE symbol are registered trademarks of BBE Sound Inc Manufactured under license from Dolby Laboratories Dolby and the double D symbol are trademarks of Dolby Laboratories HDMI the HDMI logo and High Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC BRAVIA and BRAVIA are trademarks of Sony Corporation BBENViVA HID 3D Sound HIGH DEFINITION MULTIMEDIA INTERFACE O The illustrations used in this manual are
43. s the blue button 4 Press lt to select Yes then press 2095 Using Optional Equipment Connecting Optional Equipment You can connect a wide range of optional equipment to your TV DIGITAL 9 OUT OPTICAL SERVICE ONLY h For service use only Connect to Input symbol on screen Description 1 el BAVI amp AV1 When you connect a decoder the TV tuner outputs scrambled signals to the decoder and the decoder unscrambles the signals before outputting them 2 CIES 5 2 SmartLink provides a direct link between the TV and s SJAV2 recorder e g DVD recorder 3 amp 6 amp Component The component video sockets support the following video COMPONENT IN inputs only 480i 480p 5761 576p 720p 10801 and 1080p Continued 2198 1uauidinb3 jeuondo bulsn Connect to Input symbol on screen Description 4 HDMI IN 1 or 2 9 HDMI IN 3 amp HDMI 1 or amp HDMI 2 amp HDMI 3 Digital video and audio signals are input from the connected equipment In addition when you connect the equipment that is compatible with control for HDMI communication with the connected equipment is supported Refer to page 30 to set up this communication If the equipment has a DVI socket connect the DVI socket to the HDMI IN 2 socket thro
44. t appear on HDMI Device List Check that your equipment is compatible with control for HDMI You cannot select Off in Control for HDMI If you have connected any audio system that is compatible with control for you cannot select Off in this menu If you want to change the audio output to the TV speaker select TV Speaker in the Speaker menu page 30 Not all channels are tuned for cable Check the support website for cable provide information http support sony europe com T V DVBC 38 For useful information about Sony products http www sony europe com myproduct 329896911 3 298 969 11 1 http www sony net U Printed in Spain
45. t Sets the sound mode Dynamic Intensifies clarity and sound presence for better intelligibility and musical realism by using the BBE High definition Sound System Standard Enhances clarity detail and sound presence by using BBE High definition Sound System Clear Voice Makes voice sound clearer Dolby Virtual Uses the TV speakers to simulate the surround effect produced by a multi channel system BBE ViVA BBE ViVA Sound provides musically accurate natural 3D image with Hi Fi sound The clarity of the sound is improved by BBE while the width depth and height of sound image are expanded by BBE s proprietary 3D sound process BBE ViVA Sound is compatible with all TV programs including news music dramas movies sports and electronic games f e If Auto Volume is set to Dolby Virtual is automatically changed to Standard nuayy Reset Resets all the Sound settings to the factory settings excluding Dual Sound Treble Adjusts higher pitched sounds Bass Adjusts lower pitched sounds Balance Emphasises the left or right speaker Auto Volume Keeps volume level constant across all programmes and adverts e g adverts tend to be louder than programmes Volume Offset Sets an independent volume level to each equipment connected to the TV Dual Sound Sets the sound from the speaker for a stereo or bilingual bro
46. tandby indicator is flashing in red When the 5 standby indicator is flashing The self diagnosis function is activated 1 Count how many times the d standbv indicator flashes between each two second break For example the indicator mav flash three times go off for two seconds then flash again three times Press 1 on the TV to turn it off disconnect the mains lead and inform your dealer or Sony service centre of how the indicator flashes number of flashes When the 5 standby indicator is not flashing 1 Check the items in the tables below 2 Ifthe problem persists have your TV serviced by qualified service personnel Condition Explanation Solution Picture There is no picture screen is dark and no sound Check the aerial cable connection Connect the TV to the mains and press on the TV If the D standby indicator lights up in red press I O No picture or menu information from equipment connected to the scart connector appears on the screen Press amp J to display the list of connected equipment then select the desired input Check the connection between the optional equipment and the TV Ghosting occurs or double images appear Check the aerial cable connection Check the aerial location and direction Only snow and noise appear on the screen Check if the aerial is broken or bent Check if the aerial has reached the end of its serviceable life
47. the appropriate settings of control for HDMI Audio Out Variable Allows you to use the TV s remote to control audio output from an audio system connected to the TV Fixed The audio output of the TV is fixed Use your audio receiver s volume control to adjust the volume and other audio settings through your audio system HDMI Set up Allows the TV to communicate with equipment that is compatible with the control for HDMI function and connected to the HDMI sockets of the TV Note that communication settings must also be made on the connected equipment 30 65 Control for HDMI Sets whether or not to link the operations of the TV and the connected equipment that is compatible with control for HDMI When set to the following menu items can be performed If the specific Sony equipment that is compatible with control for HDMI is connected this setting is applied to the connected equipment automatically when the Control for HDMI is set to using the TV Auto Devices Off When this is set to the connected equipment that is compatible with control for HDMI turns off when you switch the TV to standby mode using the remote Auto TV On When this is set to the TV turns on when you turn on the connected equipment that is compatible with control for HDMI Device List Creates or updates the HDMI Device List Up to 11 Update compatible equipment items can be connected
48. tical size of the picture when Screen Format is set to Smart Zoom or 14 9 PC Settings Screen Format Sets a screen format for displaying pictures from your PC Full 1 Enlarges the picture to fill the vertical display area while maintaining its original proportion Full 2 Enlarges the picture to fill the display area Reset Resets all PC screen settings to factory settings Auto Adjustment Automatically adjusts the display position and phase of the picture when the TV receives an input signal from the connected PC Auto Adjustment may not work well with certain input signals In such cases manually adjust Phase and Horizontal Shift Phase Adjusts the phase when the screen flickers Pitch Adjusts the pitch when the picture has unwanted vertical stripes Horizontal Shift Adjusts the horizontal position of the picture Power Management Switches the TV to standby mode if no signal is received for 30 seconds Continued 2998 AV Set up AV Preset Assigns a name to equipment connected to the side and rear sockets The name appears briefly on the screen when you select the equipment You can skip input sources from connected equipment that you do not want displayed on the screen 1 Press 4 9 to select the desired input source then press 2 Press 9 9 to select the desired option then press C Equ
49. ugh a DVI HDMI adaptor interface not supplied and connect the equipment s audio out sockets to the audio in sockets in the HDMI IN 2 sockets f The HDMI sockets support the following video inputs only 4801 480p 5761 576p 720p 10801 1080p and 1080 24p For PC video inputs see page 36 Be sure to use an HDMI cable that bears the HDMI logo When connecting an audio system that is compatible with control for HDMI be sure to also connect it to the DIGITAL AUDIO OUT OPTICAL socket 5 amp OPC IN PC It is recommended to use a PC cable with ferrites like the Connector D sub 15 ref 1 793 504 11 available in Sony Service Centre or equivalent 6 DIGITAL AUDIO OUT OPTICAL except for KDL 40S40xx 40U40xx Use an optical audio cable 7 G You can listen to TV sound on the connected Hi Fi audio equipment 8 Conditional Access Module Provides access to pay TV services For details refer to the instruction manual supplied with your CAM To use the CAM remove the dummy card from the CAM slot then turn off the TV and insert your CAM card into the slot When you are not using the CAM we recommend that you keep the dummy card in the CAM slot f CAM is not supported in some countries areas Check with your authorised dealer 10 5 and amp AV3 When connecting mono equipment connect to the DAV3 L so
50. ustment may improve picture quality You can adjust the fine tuning over a range of 15 to 15 When On is selected fine tuning adjustments are made automatically Audio Filter Improves the sound of individual channels when distortion occurs in mono broadcasts Sometimes a non standard broadcast signal can cause sound distortion or intermittent sound muting in mono programmes If you do not experience any sound distortion we recommend that you leave this option to Off factory setting f You cannot receive stereo or dual sound when Low or High is selected Audio Filter 15 not available when System is set to 1 LNA Improves the picture quality of the channel noisy picture when the broadcast signal is very weak If you cannot see any improvement in the picture quality even if you set to set this option to factory setting Skip Skips unused analogue channels when you press PROG 4 to select channels To select channels you have programmed to skip use the corresponding number buttons 32 Decoder Allows you to view and record the scrambled channel when using a decoder connected directly to scart connector C2 3AV I or 2 2c3 8S 3AV2 via a recorder f This option is not available when United Kingdom is selected for Country page 7 nuayy Confirm Saves changes
51. you have made to the Manual Programme Preset settings Digital Set up M3 Digital Tuning Digital Auto Tunes in the available digital channels Tuning You can retune the TV after moving house or to search for newly launched channels Programme List Allows you to remove or change the order of digital channels Edit stored in the TV 1 Press 4 9 to select the channel you want to remove or move to a new position You can also select a channel by pressing the number buttons to enter its three digit channel number 2 Remove or change the order of the digital channels as follows To remove the digital channel Press After a confirmation message appears press lt to select Yes then press To change the order of the digital channels Press gt then press 4 or number buttons to select the new position for the channel and press lt Press RETURN Digital Manual Tunes the digital channels manually This feature is available Tuning when Digital Auto Tuning is set to Antenna 1 Press the number buttons to enter the channel number you want to tune then press 4 9 2 When the available channels are found press 4 3 to select the channel you want to store then press C 3 Press 9 to select the channel number where you want to store the new channel then press C Repeat the above procedure to tune other channels Digital Set up Subtitle Set up Subtitle Setting When set to For Hard Of Hearing visual aids for the hear
Download Pdf Manuals
Related Search