Sirius Satellite Radio 10 Satellite Radio User Manual
Contents
1. 1 Use the CHANNEL Button to highlight the Audio Level Press the SELECT Button to select 2 Use the CHANNEL Button to adjust to the desired audio output level A 10 segment horizontal bar graph is displayed with a sign to the left and a sign to the right To select and exit this function press the SELECT or MENU Button Sanyo CRSR 10 User Guide SANYO Antenna Aiming When using the home antenna included or the optional BMBX 10 Boombox docking station indoors it is important to position the antenna in an acceptable location See the BMBX 10 installation guides for more information on the Boombox 1 In the Menu Options screen use the CHANNEL Button to highlight Antenna Aiming Press the SELECT Button to select 2 Two 10 segment horizontal bar graphs will be displayed SAT and TER with a sign to the left and a sign to the right SAT indicates a satellite signal and TER indicates a terrestrial signal if available 3 It is best to position the antenna on a window sill with a clear view of the sky Sanyo CRSR 10 User Guide 4 Adjust the antenna for maximum performance by positioning the antenna where the above signals are the strongest To exit this function press the SELECT Button or the MENU button SANYO Memory Options In this mode the user can turn the Memory Search Function S SEEK On or Off In additi2. i Scrolling Song Title Artist Name Satellite Signal Clock Indicator 8 Character Category r AE Le Band Preset Bank Number Changing Channels Pressing the right CHANNEL Button will increase or move down to the next channel Pressing the left CHANNEL Button will decrease or move up to the next channel Pressing and holding the CHANNEL button will scroll quickly through the Channel selections Sanyo CRSR 10 User Guide 13 SANYO Search Modes Category Channel Artist Song The CRSR 10 has four ways to search for and select music by category by channel by artist and by song title Searching Categories If you want to listen to a different entertainment category push the CAT button up or down to activate the Category Select Screen top right 1 Use the CAT button to scroll through music and entertainment categories 2 When the category ex Rock you want is highlighted use the CHANNEL Button to search available channels within the category e Pressing the DISP button while in the Category search mode will change the display between Channel Name Artist Name and Song Title enabling you to preview what is playing on other channels before selecting 3 When the channel you want is highlighted press the SELECT Button The channel will change and the display will revert to the Default Screen for the new channel To exit this mode without changing to a new Searching Channels Channel List Mode
3. It is possible to search for a different channel while listening to your current channel Be sure that the display shows the Default Screen prior to executing the following steps 1 Press and hold the DISP button for 2 seconds to activate the Channel List Screen top right The Channel List Screen will appear showing all available channels regardless of category e Pressing the DISP button while in the Channel List Screen will change the display between Channel Name Artist Name middle right and Song Title bottom right You can use this feature to search for a specific Artist or Song that may be playing at the time channel press and hold the DISP button for 2 seconds 2 Press the CHANNEL Button up or down to find the channel you want 14 Sanyo CRSR 10 User Guide 3 Press and release the SELECT Button to select the channel To exit this mode without changing to a new channel press and hold the DISP button for 2 seconds Press and Hold the xe DISP button to enter the Channel List Mode Press DISP again to show the Artist Name Press DISP again to show the Song Title Press DISP again to go back to Channel List SANYO Channels can also be directly accessed by pressing and releasing the SELECT Button while in the Default Screen and using the 0 9 number keys to numerically enter the desired channel below Once the desired channel number has been entered press the SELECT button and the channel
4. e Program Alert On Off Factory Default is a specific time Press the SELECT Button to enter Off Press the CHANNEL Button to toggle the Program Alert Menu The following adjustment between On or Off When the desired options are available alert status is highlighted press the e Program Time Day Pressing the CHANNEL SELECT Button hour e Sleep Mode In this mode you have the capability of programming the unit to shutdown after a selected period of time The screen displays Sleep Mode on the top line with optional time settings as follows Button toggles between Time and Day If Time is d Auto Shutdown In this mode you have the selected use the CHANNEL Button to increase option of programming the unit to Off or decrease the set time from the default value automatically shut off after a 1 hour period 15 MN 12 00 PM AM or PM will switch automatically without any user intervention 30 min when the AM or PM threshold has been ae exceeded 30 Sanyo CRSR 10 User Guide Sanyo CRSR 10 User Guide 31 SANYO Factory Default This Menu option is designed to restore all the Note If Yes is chosen the unit reverts to the original factory settings To activate the Factory original factory settings for the following Default perform the following procedure while parameters in the Menu Options List mode All Presets revert to empty 1 Use the CHANNEL Button to highlight the Display Brightness to 100 Factory Defa
5. the CHANNEL Button to set the time you want the CRSR 10 to activate Default is 12 00 PM Press the SELECT Button to store the Alarm Time c Program Alert When this menu option is When the desired time is displayed press the SELECT Button If Day is selected the screen displays a list consisting of Monday Tuesday Wednesday Thursday Friday Saturday Daily or Sunday Use the CHANNEL Button to scroll to the desired day Press the SELECT button to select the desired day e Channel Selection Press the CHANNEL Button to scroll through a listing of all the SIRIUS channels When the desired channel is highlighted press the SELECT To activate the Auto Shutdown feature use the CHANNEL Button to select it from the Auto Shutdown Menu press the Knob to enter the adjustment mode Once in the Auto Shutdown Menu use the CHANNEL Button to highlight either Enabled or Disabled Press SELECT to change the Auto Shutdown feature e Cancel Auto Shutdown If you want to temporarily deactivate the Auto Shutdown feature once the beep tone sounds press the SELECT key The Auto Shutdown sequence will revert back to 1 SANYO Use the CHANNEL Button to select the desired Sleep Time When the desired time is highlighted press the SELECT Button The Receiver will now turn off after the selected time has expired highlighted and selected you will be able to Button program the unit to switch to a selected channel at
6. will revert to the P TUNE Display P TUNE right corner of the Default Screen Song Title List Screen 2 Press the desired preset button 0 9 to recall the preset The channel will change and the display will revert to the Default Screen for the new channel Default Display P TUNE Display Sanyo CRSR 10 User Guide Sanyo CRSR 10 User Guide SANYO Memory MEMO and Song Seek S SEEK Functions This feature allows you to capture and store the current Artist amp Song title with a total of 10 listings 10 Artist Song Title combinations The unit also has the capability to search the current incoming SIRIUS signal and alert you when a saved song is being played Storing Song Titles 1 While the CRSR 10 is in the Default display mode momentarily pressing and releasing the MEMO button stores the current program data information within the CRSR 10 s memory A memory Stored pop up screen followed by X Used Y Empty will each appear for 1 second below 2 Ifthe MEMO button is pressed to save a currently playing selection and all of the memory spaces are full Memory Full right top left will flash on the display for 1 second followed by a pop up screen presenting the Replace Cancel be ow top right options This prompt allows you to make the following Replace Cancel choices e By selecting Replace the memory list will appear below bottom left and you can use the CHANNEL Button t
7. ICH MAY BE IMPLIED BY LAW INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS IS LIMITED TO THE TERM OF THIS WARRANTY IN NO EVENT SHALL SFC BE LIABLE FOR SPECIAL INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING FROM OWNERSHIP OR USE OF THIS PRODUCT OR FOR ANY DELAY IN THE PERFORMANCE OF ITS OBLIGATIONS UNDER THIS WARRANTY DUE TO CAUSES BEYOND ITS CONTROL SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS AND OR DO NOT ALLOW THE EXCLUSION OR LIMITATION OF CONSEQUENTIAL DAMAGES SO THE ABOVE LIMITATIONS AND EXCLUSIONS MAY NOT APPLY TO YOU THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS YOU MAY HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE For your protection in the event of theft or loss of this product please fill in the information below for your own personal records Model No Serial No Located on back of unit Date of Purchase Purchase Price Where Purchased Sanyo CRSR 10 User Guide 39
8. IUS ID SID eee SIRIUS Customer Service 1 888 539 7474 Located on back of unit Sanyo CRSR 10 User Guide SANYO SANYO MOBILE AUDIO MODEL CRSR 10 LIMITED WARRANTY OBLIGATIONS In order to obtain warranty service the product must be delivered to and picked up from an Authorized Sanyo Factory Service Center at the user s expense unless specifically stated otherwise in this warranty The names and addresses of Authorized Sanyo Service Centers may be obtained by calling the toll free number listed below For product operation authorized service center referral service assistance or problem resolution call FACTORY SERVICE 1 800 421 6382 Weekdays 7 30 am 5 00 pm Pacific Time THIS WARRANTY IS VALID ONLY ON SANYO PRODUCTS PURCHASED AND USED IN THE UNITED STATES OF AMERICA THIS WARRANTY APPLIES ONLY TO THE ORIGINAL RETAIL USER AND DOES NOT APPLY TO PRODUCTS USED FOR ANY INDUSTRIAL PROFESSIONAL OR COMMERCIAL PURPOSE THE ORIGINAL DATED BILL OF SALE OR SALES SLIP MUST BE SUBMITTED TO THEAUTHORIZED SANYO SERVICE CENTERAT THE TIME WARRANTY SERVICE IS REQUESTED Subject to the OBLIGATIONS above and EXCLUSIONS below SANYO FISHER COMPANY SFC warrants this SANYO product against defects in materials and workmanship for the periods specified below SFC will repair or replace at its option the product and any of its parts which fail to conform to this warranty with new or reconditioned products or parts The warranty period commences o
9. RSR 10 meni Press the MENU Button to go back to the main 1 Press the MENU Button Use the CHANNEL Button Menu to highlight the FM Transmitter option Press the SELECT Button to select 3 Use the CHANNEL Button to highlight On or Off FM Frequency Options 1 If you would like to change the FM frequency use the CHANNEL Button to highlight Frequency in the FM Transmitter options Screen You are able to select between frequencies 88 1 MHz 107 9 MHz 2 Use the CHANNEL Button to highlight FM On Off below Press the SELECT Button to select the option Sanyo CRSR 10 User Guide 23 SANYO Use the CHANNEL Buttons to scroll through the list of available frequencies Use the CAT Buttons to scroll 5 lines at a time for faster Frequency search Press the SELECT Button to choose the desired frequency Be sure to change your car or home stereo s FM frequency to the same frequency as the CRSR 10 To exit the FM Transmitter Options simply push the MENU button Audio Jack Connection Options If you would like to use the supplied Audio Jacks shown below instead of the built in wireless FM Transmitter you must first confirm that your car stereo has RCA jacks or a mini plug auxiliary input If so you may connect your CRSR 10 directly to your car s stereo Please consult a qualified dealer for install options Other Audio Connection Options If your car stereo doesn t have RCA Jacks you
10. SANYO SIRIUS SATELLITE RADIO Sanyo Fisher Co 21605 Plummer St Chatsworth CA 91311 www sanyo com SIRIUS Satellite Radio 1221 Avenue of the Americas New York NY 10020 888 539 7474 CRSR 10 User Guide WWW SIrIus com LA LA 2004 SIRIUS Satellite Radio Inc CRSR 10 7 24 04 SANYO CONGRATULATIONS Your new Sanyo CRSR 10 portable Plug n Play receiver lets you enjoy SIRIUS Satellite Radio s digital entertainment in your car home office or boat You may also purchase the Sanyo BMBX 10 Portable Boombox for an enhanced listening experience Use this manual to familiarize yourself with all of CRSR 10 s features and capabilities For the latest information about this and other Sanyo products visit www sanyo com Table of Contents BOX COMENTS acc cecddece tbscuaaeasactaccastnessansedieicestecsargsuescestders 3 Safety PreCauuOnS vsssssccannrencescacsuiaactnencetosdiawabiolanaues 4 Installation in a Vehicle srcccccissmcnrariarosaienemsasaecesarreerecabanesss 6 Installation in a Home or Office ccccccecssssessseeeeeeees 9 Sanyo Controls and Features ccccccsssssssseeeeeeeeeeees 10 Activating your SIRIUS Subscription 0 0 0 eeeeeeees 12 Basi Operaio ccnats stance cecuscnstendcadstanecnsiagacaasttestesaseceeset 13 Changing Channels sasscscicvnccorectinsacs satdaneanvncdinasVewaaveccan 13 Search Modes Category Channel Artist Song 14 Direct TUMNO scncsnanaeececencerec
11. SR 10 Antenna or cable is faulty Contact system installer or vendor Switch to another FM frequency 2 Move CRSR 10 closer to car FM antenna a Audio static or loss of 3 Use FM switching box clarit y Vehicle antenna not connected to radio Check vehicle antenna cable Antenna Not Detected message FM modulator frequency contains static No signal on CRSR 10 Check for obstacles over or around display antenna or move antenna placement Change location to eliminate nearby obstacles bridge trees etc 1 Audio Cables not connected 1 Check cables at CRSR 10 and radio 2 Select another FM frequency 2 Incorrect FM modulator frequency 3 Turn on FM transmitter in CRSR 10 3 FM transmitter option not turned on menu 34 Sanyo CRSR 10 User Guide No Sound SANYO Specifications Aodio OUPO e r a ae eee ene ee are earn 776 mV RMS or 1 v peak to peak Total Harmonie Disiorion Ald serret aia RE A rare EEEren lt 0 5 Signal to noise S N csceseccnadesavnendsnscavnousesdceceasnesbessadancuaashenteaseeensasleewasdedancacecsdanedesendaneeasses Greater than 83dB Fuse Requirement ass ce cca acest sees se see aoc eee act eee vee se eee see eres 3A Slow Blow POWwWer GUPDIY cere ee e eee neem E E oe eee arene ene ee eer eer ae 7 6V 24V Negative Ground DC CTSNET MU gece sc setacnetec ne rece te eget esaect ieee teehee cern cteecoepeeteredre teen teteateeet renee sncetiename are caineeeceertemcesensetecseuctce 1A Operating
12. TEMpPerature ccccccccssssssssecceceeececeeesssseeceeeeeeeeeeeeaasseeceeeeeseeseeeeaeaseeeeeeeeessseeaasssssseeeeeeeeeess 20 70C CRSR 10 Dimensions giscsececcsesscseseinncsariativassiastedeecabontiedetiaseauneaamseeades 101mm W x 101mm H x 32mm D EE nc ese E EEE es bee ce so eee eae oe eae ets E E E oases cee 3 97 W x 3 97 H x 1 26 D CR9PR 10 Weigl Ramana mantra annette ee Rte a eo re en On Re eee ree 240g Note Features and Specifications subject to change without notice Sanyo CRSR 10 User Guide 35 SANYO Optional Accessories Add one or all of these accessories to maximize your Sanyo experience BMBX 10 Portable Boombox The BMBX 10 Boombox is a portable docking station and audio system for the Sanyo CRSR 10 The built in amplifier and speakers delivers rich powerful sound indoors or outdoors FM Switching Box The FM Switching Box is an optional accessory if you choose to hard wire your CRSR 10 to your car s audio system instead of using the built in wireless FM Transmitter Includes the Following Includes the Following e FM Switching Box wiring e Installation instructions e Portable Boombox with built in AM FM tuner amplifier and speakers Auxiliary input for other audio devices Headphone jack for private listening Subwoofer out jack Adjustable indoor outdoor antenna with 21 of cable e AC adapter User Guide 36 Sanyo CRSR 10 User Guide SANYO Important Information SIR
13. confirm below Sanyo CRSR 10 User Guide 19 SANYO ag the Song S Seek Alert Press and hold the MEMO button for 2 seconds to enter the S Seek Mode 2 Press and Release the SELECT Button A pop up screen displaying two selectable options Delete and S Seek will appear below left 3 Use the CHANNEL Button to highlight the S Seek option 4 Press and release the SELECT Button and an S Seek confirmation screen will appear Select the On option using the CHANNEL Button and press the SELECT Button to confirm below right Each time the CRSR 10 is turned on it automatically searches the incoming signal to determine if a match exists between the signal and the currently saved information stored in the CRSR 10 memory If one or more matches are found a pop up screen momentarily appears for 2 seconds and displays S Seek An audible beep tone will be heard indicating that a match has been found The display then reverts to the S Seek Alert screen which displays the current matches You can now select the Artist Song Title that you wish to listen to No stored match alert is provided for the currently selected channel To ensure that no duplicate entries are stored in memory the CRSR 10 will check the stored input data to ensure the information about to be stored is not already in memory e f one or more matches are found a display list appears below and allows you to scroll t
14. d hear audio the display will read Antenna damage it Keep the wire away from areas where it Error Reorient the antenna until you hear could become tangled in driver s and passenger s audio fet Make sure the vehicle is not in a garage or 5 Plug the antenna into the back of cradle where it says somewhere the satellite signal could be ANT blocked 8 Sanyo CRSR 10 User Guide SANYO 6 Plug the cigarette lighter adapter into 2 Plug the audio cable s mini connector into the back of the the cigarette lighter SANYO adaptor Plug the audio cable s white L ch and red R ch RECOMMENDS UNPLUGGING connectors into the aux in jacks of your audio system THE CIGARETTE LIGHTER 3 Plug the AC cord power supply into the back the adaptor ADAPTERAFTER YOU TURN THE 4 Plug the antenna into the back of the adaptor until it is firmly VEHICLE S IGNITION OFF secure 5 Assemble the Home stand and hook the CRSR 10 onto the Installation in a Home or Office home stand as shown below Tune to your desired channel 1 Plug the Adaptor into the bottom of lt the CRSR 10 aa 6 Due to the paths of SIRIUS satellites over the US the best pi location for the antenna in your home depends on where you live Some experimentation may be needed to obtain the best 2 OUTPUTS q results In major US cities you may also be able to receive the E ie signal from SIRIUS ground repeaters which may all
15. e GMT 4 00 Atlantic GMT 3 30 Newfoundland Abbreviated as Newfndind Daylight Saving Time DST Observance Activate this function if your area is subject to DST press the CHANNEL Button to toggle between DST Observed default or DST Not Observed b Alarm Clock When this menu option is highlighted and selected you will be able to set the unit to turn on at a specific time The last selected channel prior to shutdown will be present when the Alarm feature is activated Alarm appears on the first line of Features Press the SELECT Button to select 2 Use the CHANNEL Button to select one of the following Time Features to adjust a Clock When entering this menu option you can setup the clock shown on the default display based on the format desired and the time zone in which you reside The clock data is provided via the Sirius Satellite data stream and will update based on the received signal e Format The Clock Format option allows for either 12 Hour Default or 24 Hour display options Use the CHANNEL Button to select the desired format Sanyo CRSR 10 User Guide 29 SANYO the display followed by the alarm options e Set Alarm Use the CHANNEL Button to select Set Alarm From the Alarm Clock Menu Select either Off Default or On from the Menu and press the SELECT Button to set the alarm On or Off Time Use the CHANNEL Button to select Time from the Alarm Clock Menu Press
16. e available on the CRSR 10 s packaging Write the number down and have your credit card handy A space has been provided at the end of this manual to write down your SID SIRIUS SATELLITE RADIO 6 Contact SIRIUS on the Internet https activate siriusradio com Follow the prompts to activate your subscription You can also call SIRIUS toll free at 1 888 539 SIRIUS 1 888 539 7474 12 Sanyo CRSR 10 User Guide 2 Press the power button to turn the CRSR 10 ON After displaying the SIRIUS logo the Receiver will update all SIRIUS channels The display will read Updating Channels on the top line and X Completed 0 20 40 60 80 100 on the bottom line until the update is completed NOTE Don t push any buttons or perform any operations until updating has been completed Once updated and the SIRIUS channels are received the display will change to Call 1 888 539 7474 to Subscribe and will place you in SIRIUS Satellite Radio s Preview Channel Channel 184 is the SIRIUS Preview Channel SANYO After you have successfully activated your SIRIUS subscription the Default Screen will appear Below Use the CHANNEL Button to select channels e The selected channel will automatically start playing The Artist Name and Song Title will scroll across the display Default Screen 3 Digit Channel Channel Number Bes oT ae E ro oe Name Scrolling Ei on pi n anaa ee ne Sonn nnn E semen n ana
17. he down position and push the window mount onto the window by pressing the Press button e With your finger on the Press button pull up on the cam lever to secure the mount in place Sanyo CRSR 10 User Guide SANYO e With the knobs loose move the yoke into a position that will allow you to see the CRSR 10 screen and access the buttons e Tighten the knobs securely e Now that the mount is in place slide the CRSR 10 into the button holder Note if the CRSR 10 rotates too much while on the suction mount tighten the adjusting screw located in the center of the mount 6 CAR ANTENNA CIGARETTE LIGHTER a ADAPTER Sanyo CRSR 10 User Guide Attach the Adaptor to the CRSR 10 as shown left below Plug the cigarette lighter adapter into the back of the Adaptor where it is labeled Power Don t plug the adapter into the cigarette lighter until the installation is completed Plug the antenna cable into the Adaptor where it is labeled Antenna e Find an antenna location on a metal surface of your vehicle at least 12 x 12 and at least 6 from a window Best reception is achieved with the antenna mounted on the roof or trunk for convertibles If the vehicle has a roof rack or skid ribs it may be necessary to mount the antenna off center lf you would like to hard wire your CRSR 10 to your car stereo that has an aux input RCA jacks plug the supplied audio cable
18. hrough the list of songs using the CHANNEL Button Once a song is found it can be selected by pressing the SELECT Button and the display will revert to either selected display modes e If a selection is not chosen within 10 seconds after the last action the screen will revert to the previously selected display and tuning mode Sanyo CRSR 10 User Guide SANYO Displays your 12 digit Sirius ID SID number The SID is unique to every CRSR 10 and is required to activate your service It is recommended that you write this number in the space provided on the last page of this user guide No adjustments are allowed in this mode To exit this option press the SELECT Button or MENU Button Menu Display Options To enter the Menu Options page press and release the MENU Button The Menu Options list will appear on the display below Using the CHANNEL Button highlight the option you wish to adjust and press the SELECT Button The following options are available Sirius ID Display Settings FM Transmitter Channel Add Skip Lock Options Audio Level Antenna Aiming Memory Options Time Features Factory Default Note If a button is not pressed within 10 seconds the Receiver will exit the Menu Options function and reverts back to the Default Screen display Sanyo CRSR 10 User Guide 21 SANYO SANYO Display Settings To adjust the Brightness and Contrast of the CRSR 10 s LCD display either
19. inna ee E E 38 SANYO Unpack your Sanyo CRSR 10 and accessories carefully and make sure that everything listed here is present 1 x CRSR 10 and 3 x Faceplates 1 x Home Stand 1 x Car Mount 1 x Car Antenna a f SANYO SIRIUS 0 1 x Car Adaptor 1x Adaptor 1 x Audio Jacks 1 x Home Power Cord 1 x Home Antenna Iae If anything is missing or damaged or if your Sanyo CRSR 10 fails to operate notify your dealer immediately It is recommended that you retain the original carton and packing materials in case you need to ship your CRSR 10 in the future Sanyo CRSR 10 User Guide Ej SANYO Safety Precautions A Warning Take the following precautions to prevent traffic accidents and avoid personal injury e Installation must be performed according to this user guide Sanyo is not responsible for issues arising from installations not performed according to the procedures in this manual e Do not install the unit where it may obstruct your view through the windshield or of your vehicle s indicator displays e Do not install the unit where it may hinder the function of safety devices such as an airbag Doing so may prevent the airbag from functioning properly in the event of an accident e The installation and use suggestions contained in this manual are subject to any restrictions or limitations that may be imposed by applicable law the purchaser should check applicable law for any restrictions or limitation
20. into the back of the Adaptor where it says Audio Plug the audio cable s white L ch and red R ch connectors into your car stereo The antenna s powerful magnet will secure it to the metal surface SANYO 8 Temporarily plug the cigarette lighter adapter into the cigarette lighter 9 Hook the CRSR 10 onto the mounting slot of the Suction Cup mount Press and hold the POWER button to turn the CRSR 10 on Running the Car Antenna Cable Before routing the antenna cable confirm that the antenna is mounted in a good location 1 Turn the CRSR 10 s power off unplug the cigarette lighter adapter from the CRSR 10 and the cigarette lighter unplug the antenna from the CRSR 10 2 Route the cable from the antenna to the vehicle s interior by tucking it underneath the rubber molding around windows and under door jams 3 Route the cable from the lowest point of the rear window into the trunk Take advantage of any existing cable channels or wiring conduits e For SUVs minivans and 5 door vehicles bring the cable into the vehicle under the rubber molding for the tailgate and continue under the interior trim 10 If your Sanyo CRSR 10 has been properly ne 4 From the trunk route the cable around the passenger connected and the antenna is receiving the compartment and to the back of the cradle SIRIUS signal you will hear audio If you do not Do not pull the wire across sharp edges that coul
21. ion made Sanyo CRSR 10 User Guide 5 SANYO Cleaning the Unit If the unit becomes dirty turn its power off and wipe it clean with a soft dry cloth Do not use hard cloths or paint thinner alcohol or other volatile solvents to clean the unit These may cause damage or remove indicator characters A Warning Do not operate the unit in a way that might divert your attention from driving safely As a driver you alone are responsible for safely operating your vehicle in accordance with traffic safety laws at all times Installation in a Vehicle 1 Determine where you want to mount the CRSR 10 on the windshield You may also want to inquire about optional mounting methods at your dealer e Do not install the CRSR 10 where it may obstruct your view through the windshield or your view of your vehicle s indicator displays e Do not install the CRSR 10 where it will hinder your access to the vehicle s controls e Do not install the CRSR 10 where it may hinder the function of safety devices such as an airbag Doing so may prevent the airbag from functioning properly in the event of an accident e Find a location that provides good visibility of and access to the CRSR 10 s front panel e Make sure the windshield is clean and dry Press Cam Lever in locked position Adjusting Screw e Loosen both knobs and lift the yoke away from the Press button in an orientation similar to above e Place the cam in t
22. may also purchase an optional FM Switching Box Please consult a qualified dealer for details and install options 24 Sanyo CRSR 10 User Guide Channel Add Skip You can add or skip new or unwanted channels while tuning To activate the Channel Add Skip perform the following procedure while in the Menu Options List mode 1 Press the MENU Button Use the CHANNEL Button to highlight the Channel Add Skip option Press the SELECT Button to select 2 Use the CHANNEL Button to select the channel you wish to add or skip bottom left Press the SELECT Button to select 3 The word Skip will appear next to the selected channel bottom right Note You can repeat step 2 for as many channels you wish to add or skip SANYO The CRSR 10 has the ability to lock the use of any channel or channels you do not want others to access without your permission The locked channel will not appear when the user changes channels with the CHANNEL Button When the user tries to access the locked channel using the Direct Tuning function the Enter Code Screen will be displayed and the channel will not be accessed until the proper code is entered While in the Menu Options List mode follow the steps below to lock a channel 1 Use the CHANNEL Button to highlight the Lock Options Press the SELECT Button to select 2 Select Lock Unlock from the Lock Options Menu next page and press the Selec
23. n the date the product was first purchased at retail LABOR 1 YEAR PARTS 1 YEAR 38 Sanyo CRSR 10 User Guide SANYO This warranty does not cover A the adjustment of customer operated controls as explained in the appropriate model s instruction manual or B the repair of any product whose serial number has been altered defaced or removed This warranty shall not apply to the cabinet or cosmetic parts knobs batteries or routine maintenance This warranty does not apply to uncrating setup installation removal of the product for repair or reinstallation of the product after repair This warranty does not apply to the elimination of car static or motor noise correction of antenna problems or damage to compact discs speakers accessories or vehicle electrical systems This warranty does not apply to repairs or replacements necessitated by any cause beyond the control of SFC including but not limited to any malfunction defect or failure caused by or resulting from unauthorized service or parts improper maintenance operation contrary to furnished instructions shipping or transit accidents modification or repair by the user abuse misuse neglect accident incorrect power line voltage fire flood or other Acts of God or normal wear and tear The foregoing is in lieu of all other express warranties and SFC does not assume or authorize any party to assume for it any other obligation or liability THE DURATION OF ANY WARRANTIES WH
24. ns 0 9 Sets and selects preset channels You can store up to 20 favorite channels SANYO 8 Memory MEMO Button S SEEK Function This feature will allow you to capture and store the current PDT information Artist amp Song title with a storage capacity of up to 10 listings Once stored the receiver will also have the capability to search the current incoming SIRIUS signal to cross reference with any stored Artist Name Song title in the CRSR 10 s memory BAND Button P TUNE This button switches between preset banks A and B which hold 10 presets each This button also enables Preset Tune Mode which allows for viewing and listening to the stored presets with a press of the SELECT Button Sanyo CRSR 10 User Guide 41 SANYO Activating your SIRIUS Subscription Before you can listen to the CRSR 10 you must subscribe to SIRIUS Satellite Radio s service 1 Make sure that the CRSR 10 is properly connected and that its antenna is oriented to receive the SIRIUS satellite signal See installation section on pages 6 9 for details You will not be able to tune to any other channels until you activate your SIRIUS subscription 4 Press the MENU button to enter the Menu Options mode The Sirius ID menu option will now be highlighted 5 Push on the SELECT Button to select Sirius ID This will display your units unique 12 digit SIRIUS ID Number This SID number should also b
25. o select the information that you would like to overwrite with the new Artist Name Song Title After highlighting the selected title in the list press the SELECT Button to delete the stored Artist Name Song Title and replace it with the updated information The display will show the Stored screen below bottom right e By selecting Cancel the prompt screen would peepee el ane ever to the ste screen Sanyo CRSR 10 User Guide oe Song Titles Stored into Memory Press and hold the MEMO button for 2 seconds to enter S Seek Mode The song titles stored memory information one at a time will be displayed on the LCD screen in page format Press and hold the MEMO button again for 2 seconds to exit S Seek Mode 2 Use the CHANNEL Button to scroll through the 10 9 page listing and view the information This function allows you to recall information regarding 3 the Artist Name and Song Title for your own personal review Deleting a Song Title Stored into Memory 1 Press and release the SELECT Button while in S Seek Mode results in a pop up screen displaying two selectable options Delete and S Seek top right Press the CHANNEL Button to highlight the Delete option Press the SELECT Button and a Delete confirmation screen will appear To permanently delete the Song Title from your list select the Yes option using the Channel Button and press the Select Button in to
26. on all 20 Preset Memory Locations can be cleared To change the Memory Options use the following procedure while in the Menu Options List mode 1 Use the CHANNEL Button to highlight the b Clear All Press and release the SELECT Memory Options Press the SELECT Button to Button a prompt display screen appears select confirming Clear All Below Select Yes or rn e No and press the SELECT Button 2 Select one of the following Memory Options a Auto Memory Search function On or Off Use To exit this function press the SELECT Button or the CHANNEL Button to select between the 2 MENU Button No button activity for 10 seconds will options by highlighting the desired selection also exit this function TOP Then press the SELECT Button to enter the option 28 Sanyo CRSR 10 User Guide SANYO e Time Zone Since the Clock adjusts the time automatically it is important to specify your proper time zone Use the CHANNEL Time Features This Menu Option allows for adjustments of the following items Clock Auto Shutdown Button to select the proper time zone The Alarm Clock Sleep Mode following is a list of time zones included Program Alert GMT 9 00 Alaska GMT 8 00 Pacific To change the Time Features use the following GMT 7 00 Mountain procedure while in the Menu Options List mode GMT 6 00 Central GMT 5 00 Eastern 1 Use the CHANNEL Button to highlight the Tim
27. ow you to a I 4 place the antenna away from a window In all cases since the antenna is weatherproof you can also locate it outside clear of lam TT any overhead obstructions Sanyo CRSR 10 User Guide 9 Sanyo Controls and Features 1 Power Button Pressing and releasing turns the CRSR 10 On and Off 2 CHANNEL Button Navigates through display screens and channels Pressing the right button increases or moves down in the menus Pressing the left button decreases or moves up in the menus 3 SELECT Button Selects of items highlighted on the display in the Category List Screens Channel List Screens and Menu List Screens From the Default Screen the user can enter a direct channel number using the keypad The SELECT button will also bring the user back to the last channel played 10 Sanyo CRSR 10 User Guide Category CAT Up Down Buttons Navigates through the Category List Screen which displays SIRIUS Channel Categories The current Category is highlighted Pressing again increments or decrements the Category highlighted Display DISP Button Pressing this button from the Default Screen will take you to the Display Properties Menu Screen where the options for Contrast and Brightness will be offered From the Default Screen this button will also switch to the Channel List Mode MENU Button Used to access menu options to make set up and feature changes Preset Number Butto
28. press the DISP Button on the face of the CRSR 10 or while in the Menu Options list perform the following steps b Brightness Control Use to adjust the overall brightness of the LCD display Use the CHANNEL Button to adjust the Brightness up or down The bar graph on the screen will move to indicate the change 1 Use the CHANNEL Button to highlight the Display Settings option Press the SELECT Button to select 2 Scroll to one of the following using the CHANNEL Button and select with the SELECT Button a Contrast Control Adjusts the relationship between the background and the text on the LCD display Use the CHANNEL Button to adjust the contrast up or down The bar graph on the screen will move to indicate the change You could also quickly access the Display Setting menu by pressing the DISP Button quick key on the face of the CRSR 10 3 Pressing and holding the DISP Button from the Default Screen will take you to the Channel List Screen Further presses of the DISP Button will change the display between the Channel List Screen Artist List Screen and the Song Title List Screen To exit the Display settings simply push the MENU button 22 Sanyo CRSR 10 User Guide FM Transmitter Options If you would like to use the built in FM Transmitter you must first make sure the feature is turned On Use the SELECT Button to select On or Off l tom the C
29. s before installing and or operating this unit e Failure to follow these safety instructions and warnings may result in a serious accident A Warning Take the following precautions to prevent fire and avoid personal injury e To avoid short circuits never put or leave any metallic objects coins tools etc inside the unit e If the unit emits smoke or unusual odors turn the power off immediately and consult your Sanyo retailer e Do not drop the unit or subject it to strong shocks e If the LCD display becomes damaged or broken do not touch the liquid crystal fluid The fluid can be dangerous to your health If the liquid crystal fluid contacts your body or clothing immediately wash it off with soap and water A Caution Take the following precautions to keep the unit in proper working order e Be sure the unit is connected to a 12V DC power supply with a negative ground connection e Do not open the unit Sanyo CRSR 10 User Guide e Do not install the unit where it will be exposed to high levels of humidity moisture or dust e When replacing a fuse use only a new one with the proper rating Using a fuse with the wrong rating may cause the unit to malfunction e To prevent a short circuit when replacing a fuse first disconnect the wiring harness Note If the unit doesn t seem to be working properly e Turn the units power off wait 5 10 seconds then turn the power on again e Ifthe unit s
30. t Button to select 3 Use the CHANNEL Button to highlight the channel you wish to lock Press the SELECT Button to select next page Note You can repeat steps 2 and 3 for as many channels you wish to Lock Sanyo CRSR 10 User Guide 25 SANYO Changing the Lock Unlock Code The first time the Lock Unlock function is accessed the user must enter the default lock code The default lock code is 0000 This code can be maintained or changed To change the default lock code perform the following procedure while in the Menu Options List mode 1 Use the CHANNEL Button to highlight Lock Options Press the SELECT Button to select 2 Select Edit Code top left from the Lock Options Menu and press the SELECT Button to select 3 Enter the default code 0000 4 The Enter Code prompt will appear Enter your new four digit code using the 0 9 number buttons top right You will then be prompted to confirm the new code by entering your code again 5 The lock code is now changed Note You can use this same method to Edit the code once it is changed from the default Audio Level The audio output of the CRSR 10 can be adjusted to fine tune the audio signal level for maximum performance This is important when using the optional BMBX 10 Boombox Docking Station To change the Audio Level perform the following procedure while in the Menu Options List mode
31. the CHANNEL Button in either direction up to 6 preset channel names IUNE PO Channel Name 3 Hold the numbered preset button you want to store to move up or down through your presets The e Pressing the DISP button while in this mode will List Screen the channel in for at least 2 seconds new channel will start to play as soon as you change between Channel Name right top e The selected preset number will flash and then stop pressing the CHANNEL Button Artist Name right middle and Song Title list remain lit on the display to show that it has been e Only stored presets will be displayed modes right bottom memorized regardless of what bank they are stored in e The name field will scroll only if the length of the PTUNE e f the preset button already has a channel stored in e Presets will be grouped and displayed by artist or song title cannot be viewed in its Artist enc it it will be replaced with the new channel preset bank and number ex A 1 A 2 B 1 entirety List Screen Recalling Channel Presets B 2 and rotate all the way around back to 3 Use the CHANNEL Button to highlight the desired The 10 presets in the active bank A or B can be the beginning preset selected by pressing the 0 9 buttons 4 Push and release the SELECT Button to select the 1 Press the BAND button to activate the preset bank Hii SEEM Channa aa preset The channel will change and the display you want The selected bank is shown in the lower
32. till malfunctions turn the unit s power off remove it from the cradle wait 5 10 seconds replace it in the cradle and turn the power back on If the problem persists consult your Sanyo retailer FCC Warning This equipment may generate or use radio frequency energy Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in this User Guide The user could lose the authority to operate this equipment if an SANYO This equipment has been tested and found to comply with Part 15 of the FCC Rules These rules are designed to provide reasonable protection against harmful interference This equipment may cause harmful interference to radio communications if it is not installed and used in accordance with these instructions However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one of more of the following measures e Reorient or relocate the receiving antenna e Increase the separation between the equipment and CRSR 10 e Connect the equipment into an outlet on a circuit different from that to which the CRSR 10 is connected e Consult the dealer or an experienced radio TV technician for help unauthorized change or modificat
33. tsanemuaneneduananncecsnmeanensacusaans 15 Setting Channel Presets cccccccsssssssssseeeeeeeees 16 Recalling Channel Presets c c sssseeeeeeseseeeees 16 Searching for a Channel Preset P TUNE Mode 16 Preset Tune List Mode cccccsssssseeeeeeeeeseeeenes 17 Memory MEMO and Song Seek S Seek Functions 18 Menu Display Options cccccccceceseeeceeeeeeeseeeeeeseeees 21 2 Sanyo CRSR 10 User Guide SPUN A E E E A EAA E E 21 Display Settings c cci lt ceccctacsnsateasedsanntectedddasxateiandendiaanns 22 FM Transmitter Options cccccceeeeeeeeeeeeeeeeeeeees 23 Channel Add Skip cccccceseeececeeeeeeeeeeeseeeeeeeeeeeaes 25 Lock ODORS serepin T 25 Audio Level srccenkosnseinsane innana 26 Antenna AIMINng escctaiterecasisteesdatnsbinlevedescaniemanpinieiasserss 27 Memory Options sincciicsaveisetertcastiedscinenmrctentaiiesatensdene 28 Time Features lt zcsccacesecotarncsecacaceseatcaeeeceaeaten 29 Factory Default 2c ciciissecvsconsacesnesees cox cnatesestexestocbtecsaxt 32 Changing the Removable Faceplates 00008 33 TV FOUDISS IG OUIAG shinee thins snaners es initelaaitass dectehadaamidileaninanieeatcadl 34 Specifications pci ceceosecadecdneagnnsenssd anemecsansedesaescacsdedeniseenexes 39 Optional Accessories 2220 scccsessssinezsicesecctectecsenntaceetenssnes 36 Important Information cccccecccceceeeeeeeeeeeeeeeeeeeeeeaees 37 WV ANTAL as
34. ult option Press the SELECT Display Contrast to 60 Button to select Restore Settings will pop FM Transmitter to On up on the CRSR 10 s display below right Audio Output Level to 50 Memory Search On Memory locations will be erased 12 Hour Clock Format Eastern time zone Daylight savings time observed Program Alert Time OFF 2 Use the CHANNEL Button to highlight Yes to eel ca Day jaa l restore all the settings or select No to return to rogram Alert Channel Number current the Menu Options List Mode Auto Shutdown Off Sleep Mode Off 32 Sanyo CRSR 10 User Guide Changing the Removable Faceplates 1 To remove the faceplate hold both sides of the CRSR 10 with one hand Locate the indented tab on the bottom of the CRSR 10 Pull on the indented tab of the faceplate with the finger of your other hand and apply gentle pressure The faceplate should snap off easily 2 To add a faceplate hold both sides of the CRSR 10 with one hand Pick up a faceplate with your other hand and place into position while making sure the indented tab remains on the bottom of the unit Once lined up the faceplate should snap on easily with gentle pressure on all four corners Sanyo CRSR 10 User Guide 33 SANYO Troubleshooting FAULT PROBABLE CAUSE REMEDY CRSR 10 does not turn on ae power cable not properly Check fuse check power cable Satellite antenna not connected Check satellite connection to CR
35. will change and the display will revert to the Default Screen for the new channel Note The CRSR 10 will change immediately if three numbers are entered ex 0 0 7 but if just one or two digits are entered the unit will change to that channel 4 seconds after the last number was entered or immediately if you press the SELECT Button SANYO SANYO Setting Channel Presets Searching for a Channel Preset P TUNE Mode Preset Tuning List Mode You can store up to 20 of your favorite channels as It is possible to quickly search through all of The P TUNE Mode can also be viewed as a list presets for quick access Presets are stored in 2 your presets using the CHANNEL Button showing Channel Name Artist Name or Song Title Preset Tuning banks A and B each containing 10 channel presets 1 Press and hold the BAND button to enter the just like in the Channel List Mode Mode 1 Press the BAND button to activate the preset bank Preset Tuning Mode P TUNE 1 Press and hold the BAND button to enter the you want The selected bank is shown in the lower 2 The bottom right portion of the display will Preset Tuning Mode P TUNE top right right corner of the Default Screen change to highlight the current preset bottom 2 Press the DISP button for 2 seconds which will 2 Select the channel you want to preset see Basic right bring up the Preset Tuning List Mode displaying Operation and Changing Channels on page 12 3 Press
Download Pdf Manuals
Related Search