Samsung WF7704NA Washer User Manual
Contents
1. 400 800 No Spin 9 Repeatedly press the Function button to select the cycle you prefer Prewash Rinse Rinse hold 10 Press the Temp button to select the temperature cold water 30 C 40 C 60 C 95 C 11 Press the Start Pause button and the machine will begin the cycle When the cycle is finished 1 Open the door NOAROP The door will not open until 3 minutes after the machine stops or the power turns off 2 Remove laundry IZ The slow rotation of the drum is not a sign of failure after the last spin of Cotton Baby Cotton or Quick Wash cycles This is a function that allows the user to remove laundry easily SELECTING OPTIONS Prewash Prevvash is only available when washing cotton Baby cotton synthetics delicate clothes To use prewash 1 Load the prewash detergent into compartment of the detergent drawer 2 Select Cotton Baby cotton or Synthetics with the Program select button 3 Press the Function button until the Prevvash indicator lights up on the control panel 4 Press Start Pause to begin the cycle Rinse Your machine will run through an additional rinsing cycle The washing duration will be prolonged accordingly Rinse Hold The laundry remains soaking in the final rinse water Before the laundry can be unloaded the Spin program must be run 9 _ Washing a load of laundry WASHING TIPS AND HINTS Sorting your laundry S2. escape wire for the electric current The appliance is equipped with a mains lead which includes an earth wire for connecting to the earth terminal of your mains plug The plug must be plugged into a socket that is properly installed and earthed The wires in this mains lead are coloured in accordance with the following code e Green and yellow Earth Blue Neutral e Brown Live uluopul Huiysem y Guljjeysuy LO e AS the colours of the wires in the mains lead of this BLUE BROWN appliance may not correspond with the coloured markings indentifying the terminals in your plug proceed as follows WARNING e Connect the green and yellow wire to the terminal in the Ensure that the plug and plug marked with the letter E or the earth symbol or power cord are not damaged coloured green or green and yellow before use If you have any e Connect the blue wire to the terminal marked with the letter x the moulded plug from this appliance N or coloured black immediately remove the fuse Connect the brown wire to the terminal marked with the and dispose of the plug letter L or coloured red Do not connect the plug to Consult a qualified electrician or service technician if in a mains socket under any doubt about any of these instructions circumstances as there is a The manufacturer of this washing machine will not accept danger of electric shock any liability for damage to p
3. type of soiling Always use low suds laundry soap which is designed for automatic washing machines When determining the detergent quantity it s necessary to consider recommendations of the detergent manufacturer indicated on the package as well as weight type of laundry it s fouling factor and water hardness in your region Keep detergents and additives in a safe dry place out of the reach of children Washing a load of laundry _10 maintaining the washing machine REPAIRING A FROZEN WASHING MACHINE If the temperature drops below freezing and your washing machine is frozen 1 a Fen Unplug the washing machine Pour warm water on the source faucet to loosen the water supply hose Remove the water supply hose and soak it in warm water Pour warm water into the washing machine drum and let it sit for 10 minutes Reconnect the water supply hose to the water faucet and check if the water supply and drain operations are normal CLEANING THE EXTERIOR 1 2 3 Wipe the washing machine surfaces including the control panel with a soft cloth and non abrasive household detergents Use a soft cloth to dry the surfaces Do not pour water on the washing machine 11_ Maintaining the washing machine CLEANING THE DEBRIS FILTER Clean the debris filter 2 or 3 times a year 1 Remove the base cover from the front of the washing machine 2 Unscrew the filter cap and take it out 3 Wash
4. 8NA VVF7520NAANF7528NA PACKAGE VVt PAPER 2 5kg 2 5 kg 2 1kg PLASTIC 1 0kg 1 0kg 0 9 kg WF7708NA WF7702NA WF7700NA SPIN MODEL VVF77O4NAAVF7604NA WE7602NA WF7522NA WF7600NA WE7520NA 7 REVOLUTION rpm 1400 1200 1000 800 17 Appendix MEMO x pu ddy 90 Appendix _18 QUESTIONS OR COMMENTS Country CALL OR VISIT US ONLINE AT U K 0870 SAMSUNG 7267864 www samsung com uk Code No DC68 02450J_EN
5. Repairing a frozen washing machine Cleaning the exterior Cleaning the debris filter Cleaning the water hose mesh filter Problems and solutions Understanding error messages Programme chart Fabric care chart Electrical warnings Protecting the environment Declaration of conformity Specification Installing the washing machine UNPACKING THE WASHING MACHINE Unpack your washing machine and inspect it for shipping damage Also make sure that you have received all of the items shown below If the washing machine was damaged during shipping or you do not have all of the items contact your Samsung dealer immediately OVERVIEW OF THE WASHING MACHINE Detergent drawer Control panel Cover top Drain Hose sulyoew Huiysem y Guljjeysuy LO Plug Base cover Adjustable feet 2 or 2 A Wrench Cold Hot option Hose guide Bolt hole covers Water supply hose SELECTING A LOCATION Before you install the washing machine select a location with the following characteristics A hard level surface if the surface is uneven see Adjusting the leveling feet below Away from direct sunlight Adequate ventilation Room temperature that will not fall below Away from sources of heat such as coal or gas Make sure that the washing machine does not stand on its power cord Ventilation openings must not be obstructed by carpeting when the washing machine is installed on a carpe
6. Sales service 1 Try to remedy the problem See Troubleshooting on this page 2 Restart the programme to see if the fault is repeated 3 If the malfunction persists call after sales service and describe the problem Troubleshooting _ 14 Buljooyssjqnoll yo orogramme chart PROGRAMME CHART e user option Detergent and Max load kg additives Spin speed MAX rpm F7704NA V F7604NA HAZ Delay Program WF770 604NA VF7522NA MAX VVF7702NA V F7700NA VVF7708NA start time VVF7702NA VVF7602NA Pre Soft WF7704NA min V F7700NA WE7600NA WE7520NA Wash Wash ener WE7604NA WF7602NA VVF7600NA VVF7608NA V F7708NA WE7608NA WF7528NA VVF7522NA V F7520NA WF7528NA Cotton 7 0 6 0 5 2 e yes 95 1400 1200 1000 800 126 Baby 7 0 6 0 5 2 e yes 60 1400 1200 1000 800 e 98 Synthetics 3 0 3 0 2 5 yes 60 800 800 800 800 e 73 Wool 2 0 2 0 1 5 yes 40 400 400 400 400 42 Handwash 2 0 2 0 1 5 yes 40 400 400 400 400 e 37 Quick ate 3 0 3 0 2 0 yes 60 1400 1200 1000 800 e 28 Program Type of wash Averagely or lightly soiled cottons bed linen table linen underwear towels Cotton shirts etc Averagely or lightly soiled cottons bed linen table linen underwear towels shirts Baby cotton etc Synthetics Lightly or averagely soiled
7. Washing Machine user manual imagine the possibilities Thank you for purchasing a Samsung product To receive a more complete service please register your product at www samsung com global register Safety information Throughout this manual you ll see Warning and Caution notes These warnings cautions and the important safety instructions that follow do not cover all possible conditions and situations that may occur It s your resposibility to use common sense caution and care when installing maintaining and operation your washer Samsung is not liable for damages resulting from improper use IMPORTANT SAFETY SYMBOLS AND PRECAUTIONS What the icons and signs in this user manual means A Hazards or unsafe practices that may result in severe personal injury or WARNING death AN Hazards or unsafe practices that may result in minor personal injury or CAUTION property damage A To reduce the risk of fire explosion electric shock or personal injury when CAUTION using your washer follow these basic safety precautions BEFORE USING THE APPLIANCE Packing materials can be dangerous to children keep all packing material plastic bags caution POlystyrene etc well out of the reach of children The appliance is designed for home use only Make sure that water and electrical connections are made by qualified technicians observing the manufacturer s instructions see Installin
8. any dirt or other material from the filter Make sure the drain pump propeller behind the filter is not blocked S Replace the filter cap s 4 Replace the base cover CLEANING THE WATER HOSE MESH FILTER You should clean the water hose mesh filter at least one time per year or when the lamps on your machine flickers To do this 1 Turn off the water source to the washing machine 2 Unscrew the hose from the back of the washing machine 3 With a pair of pliers gently pull out the mesh filter from the end of the hose and rinse it under water until clean Also clean the inside and outside of the threaded connector 4 Push the filter back into place Screw the hose back onto the washing machine 6 Turn on the faucet and make sure the connections are watertight sulyoew Huiysem y GHulureyureyy 60 Maintaining the washing machine 12 troubleshooting PROBLEMS AND SOLUTIONS PROBLEM SOLUTION The washing machine will not start Make sure the door is firmly closed Make sure the washing machine is plugged in Make sure the water source faucet is turned on Make sure to press the Start Pause button No water or insufficient water supply Make sure the water source faucet is turned on Make sure the water source hose is not frozen Make sure the water intake hose is not bent Make sure the filter on the water intake hose is not clogged Detergent remains in the d
9. blouses shirts etc Made of polyester Diolen Trevira y polyamide perlon Nylon or similar blends Handwash Very light wash course like hand wash Wool Only machine washable wollens with pure new wool label Quick wash Lightly soiled cottons or linen blouses shirts coloured linen articles jeans etc 1 The programme duration data has been measured under the conditions specified in Standard IEC 456 2 Consumption in individual homes may differ from the values given in the table due to variations in the pressure and temperature of the water supply the load and the type of laundry 15_ Programme chart FABRIC CARE CHART ay Resistant material Do not iron Can be dry cleaned using any Delicate fabric m solvent Dry clean vvith perchloride lighter fuel pure alcohol or R113 only tem may be washed at 95 C Dry clean vvith aviation fuel pure alcohol or R113 only tem may be washed at 60 C tem may be washed at 40 C tem may be washed at 30 C Do not dry clean Dry flat tem may be hand washed Can be hung to dry rema ob Dry clean only Dry on clothes hanger KZ Can be bleached in cold water Tumble dry normal heat xp ms A Do not bleach Tumble dry reduced heat Can be ironed at 100 C max K Do not tumble dry ELECTRICAL WARNINGS To reduce the risk of fire electr
10. chine Tighten by hand a 2 Connect the other end of the cold vvater supply hose to your 3 sink s cold water faucet and tighten it by hand If necessary you can reposition the water supply hose at the washing machine end by loosening the fitting rotating the hose and retightening the fitting POSITIONING THE DRAIN HOSE The end of the drain hose may be positioned in three ways Over the edge of a sink The drain hose must be placed at a height of between 60 and 90 cm To keep the drain hose spout bent use the supplied plastic hose guide Secure the guide to the wall with a hook or to the faucet with a piece of string to prevent the drain hose from moving 5 Installing the washing machine n a sink drain pipe branch The drain pipe branch must be above the sink siphon so that the end of the hose is at least 60 cm above the ground In a drain pipe Samsung recommends that you use a 65 cm high vertical pipe it must be no shorter than 60 cm and no longer than 90 cm PLUGGING IN THE MACHINE You MUST ground the plug of the washing machine Check with a licensed electrician before using the machine to make sure it is properly grounded For U K Users Wiring Instructions YELLOW 13 AMP FUSE WARNING THIS APPLIANCE MUST BE EARTHED This appliance must be earthed In the event of an electrical short circuit earthing reduces the risk of electric shock providing an
11. e Save water and electricity by only washing full loads the exact amount depends upon the program used Appendix _16 xipueddy 90 DECLARATION OF CONFORMITY This appliance complies with European safety standards EC directive 93 68 and EN Standard 60335 TYPE FRONT LOADING WASHER WE7704NA WF7702NA WE7604NA WF7602NA VVF7522NA VVF7700NA AVF7708NA VVF7600NA VFT6OBNA VVF7520NA ANF7528NA DIMENSION W598mm X X W598mm X D550mm X W598mm X D450mm X H844mm H844mm H844mm WATER PRESSURE 50 kPa 800 kPa WATER VOLUME 60 544 49 7 VVASH AND SPIN 7 0 kg 6 0 kg 5 2 kg CAPACITY Dry Laundry Dry Laundry Dry Laundry VVF7702NA VVF7602NA VVF77O4NA VVF7700NA WF7604NA VVF76OONA 5 a NET WEIGHT VVF7708NA VVF7608NA 73 kg 72 kg 71 kg 70 kg 63 kg MODEL WE7704NA WF7702NA WE7604NA WF7602NA VVF7522NA VVF7700NA VF7708NA WF7600NA WF7608NA VVF7520NA ANF7528NA VVASHING 220 V 2000 W 220 V 2000 W 220V 1900 W POWER AND HEATING gov 2400 W 240V 2400VV 240 2200VV CONSUMPTION MODEL F WE WF WF Wr WF We WF Wr WE WE SPIN 7704NA 7702NA 7700NA 7708NA 7604NA 7602NA 7600NA 7608NA 7522NA 7520NA 7528NA 230V 700 w 360 w 320 w 270 w 580 w 530 w 500 w 430 w 550 w 500 w 430 W PUMPING 34W MODEL WE7704NA WF7702NA WE7604NA WF7602NA VVF7522NA VVF7700NA VF7708NA WF7600NA WF760
12. er 30 C 40 C 60 C and 95 C When pressing this button during washing you can see the selected Spin selection button temperature in the display panel Press the button repeatedly to cycle through the available spin speed options WEF7704NA WF7604NA no spin 4 400 800 1400 WEF7702NA WF7602NA WF7522NA no spin 8 400 800 1200 WEF7700NA WF7600NA WF7520NA no spin J 400 800 1000 rpm WEF7708NA WF7608NA WF7528NA no spin 421 400 800 800 rom 6 Function button Press the button repeatedly to cycle through the available partial wash options Easy lron gt Rinse Hold gt Rinse gt Prewash gt Easy lron Rinse Hold gt Easy ron Rinset gt Easy Iron Prewash gt Rinse Prewash gt Easy Iron Rinse Prewash e Prewash is only available when washing cotton Baby Cotton or synthetics According to selected course there are unselected functions Delay End selection button Press this button repeatediy to rotate betvveen the retarded start options available from 3 Hours to 24 Hours in 1 hour increments i Start Pause button Press to pause and restart programs o On Off button Press once to turn the washing machine on press again to turn the washing machine off If the washing machine power is left on for longer than 10 minutes without any buttons being touched the power automatically turns off 7_ Was
13. ersons or material for non observance of these requirements There are no user serviceable parts inside the washing machine and if the mains lead of this appliance is damaged it must only be replaced by qualified service personnel approved by the manufacturer because special tools are required CIRCUITS Your washing machine should be operated on a separate circuit from other appliances Failure to do this may cause the circuit breaker to trip or the fuse to blow Installing the washing machine _6 washing a 1080 of laundry OVERVIEW OF THE CONTROL PANEL Power Spin Easy Iron O Cold Wash Program Temp Spin Function Delay End P N vz N A Pd v 0 5 x This is a general manual The INLAY system may be different from that of the product you purchased For a see item 4 below to select the right specifications that match your product o Display panel Displays wash cycle and error messages During execution of the program the program indicator blinks G Program Select button Press the button repeatedly to select one of the six available wash program Cotton gt Baby Cotton gt Synthetics gt Handwash gt Wool gt Quick Wash gt Rinse Spin gt Spin Temp selection button Press the button repeatedly to cycle through the available water temperature options cold wat
14. etergent drawer after the wash program is complete Make sure the washing machine is running with sufficient water pressure Put the detergents in the inner parts of the detergent drawer away from the outside edges Washing machine vibrates or is too noisy Make sure the washing machine is set on a level surface If the surface is not level adjust the washing machine feet to level the appliance Make sure that the shipping bolts are removed Make sure the washing machine is not touching any other object Make sure the laundry load is balanced The washing machine does not drain and or spin Make sure the drain hose is not squashed or bent Make sure the water hose mesh filter is not clogged 13_ Troubleshooting UNDERSTANDING ERROR MESSAGES ERROR CODE SOLUTION dE e Close the door fe e Make sure the source water faucet is turned on e Check the water pressure Clean the debris filter e Make sure the drainage hose is installed correctly e Laundry load is unbalanced loosen any tangled laundry UE f only one item of clothing needs washing such as a bathrobe or jeans the final spin result might be unsatisfactory and an UE error message will be shown in the display window e Check the end of the drain hose is too low Make sure the holder of LE drain hose in the back is intact Check the end of the drain hose is submerged in water Before contacting After
15. g the Washing Machine and local safety regulations All packaging and shipping bolts must be removed before the appliance is used Serious damage may occur if they are not removed See Removing the shipping bolts Before washing clothes for the first time you must run a complete cycle without clothes See Washing for the first time SAFETY INSTRUCTIONS Before cleaning or carrying out maintenance unplug the appliance from the electrical outlet wanne OF Set the o On Off button to Off Make sure that the pockets of all clothing to be washed are empty Hard sharp objects such as coins safety pins nails screws or stones can cause extensive damage to the appliance Always unplug the appliance and turn off the water after use Before you open the door of the appliance check that the water has drained Do not open the door if you can still see water Pets and small children may climb into the appliance Check the appliance before each use 1_ Safety information 124 The glass door becomes very hot during the washing cycle Keep children away from the appliance while it is in use Do not attempt to repair the appliance yourself Repairs made by inexperienced or unqualified persons may cause injury and or make more serious repairs to the appliance necessary If the plug power supply cord is damaged it must be replaced by the manufacturer or its service agent or a similar qualified person in order to av
16. hing a load of laundry What is the Child Lock function f you press the Child Lock button Spin Function button longer than 2 sec during operation this function is selected f once this function is selected no change can be done until the end of laundry e Press the Child Lock button Spin Function button longer than 2 sec to cancel the function WM STOPS THE CURRENT STEP OF THE CYCLE OR DOES NOT PROCEED TO THE NEXT STEP OF WASHING INDICATION OF REMAIN TIME ON LED DISPLAY MAY INCREASE Your new washing machine is equipped with Fuzzy Logic system which not only sets the optimum level of water and other parameters of washing but also controls the washing process as well as makes necessary corrections in order to provide better washing results In the above mentioned matter the Fuzzy Logic system has detected deviations in washing cycle such as high quantity of detergent at the end of the cycle high vibration level while spinning etc You can adjust existing wash programs i e change wash temperature and spin speed After detection of such abnormalities the washing machine is suspending the normal course of program in order to normalize these parameters and continue the cycle Fuzzy logic system makes 7 attempts to eliminate such deviations If it is impossible to normalize the above mentioned deviations by Fuzzy Logic system you will see the corresponding indication on LED lamps See chapter Troubleshooti
17. ical shock and other injuries keep these safety precautions in mind e Operate the appliance only from the type of power source indicated on the marking label If you are not sure of the type of power supplied to your home consult your appliance dealer or local power company Use only a grounded or polarized outlet This plug will fit into the power outlet only one way If you are unable to insert the plug fully into the outlet try reversing the plug If the plug still doesn t fit contact your electrician to replace your outlet e Protect the power cord Power supply cords should be routed so that they are unlikely to be walked on or pinched by items placed on or against them Pay particular attention to cords at plugs convenience receptacles and the point where they exit from the unit Do not overload the wall outlet or extension cords Overloading can result in fire or electric shock PROTECTING THE ENVIRONMENT e This appliance is manufactured from recyclable materials If you decide to dispose of this appliance please observe local waste disposal regulations Cut off the power cord so that the appliance cannot be connected to a power source Remove the door so that animals and small children cannot get trapped inside the appliance Do not exceed the detergent quantities recommended in the detergent manu facturers instructions e Use stain removal products and bleaches before the wash cycle only when strictly necessary
18. ng The operation of Washing machine that corresponds to above mentioned scheme is considered to be normal WASHING FOR THE FIRST TIME Before washing clothes for the first time you must run a complete cycle without clothes To do this 1 Press the 2 On Off button Pour a little detergent in the detergent drawer b Turn on the water supply to the washing machine Press the Temp button repeatedly until 40 C is displayed Press the Start Pause button a PF oN This will remove any water from the manufacturer s test run remaining in the machine PUTTING DETERGENT IN THE WASHING MACHINE 1 Pull out the detergent drawer D D 2 Add laundry detergent into compartment 3 Add softener into compartment 6 if you desire 4 Add prewash detergent into compartment if you desire Washing a load of laundry 8 Aipune jo peo e BuiyseM 20 washing a 1080 of laundry WASHING CLOTHES MANUALLY You can wash clothes manually without using the Fuzzy Logic feature To do so 1 Turn on the water at the water source sink Press the o On Off button on the washing machine Open the door Load the articles one at a time loosely into the drum without overfilling Close the door Put the detergent in the detergent drawer b Repeatedly press the Program button to select the cycle you prefer Cotton Baby cotton Synthetics and Quick wash 8 Press the Spin button to select the spin speed No Spin
19. oid a hazard This appliance should only be serviced by an authorized service center and only genuine spare parts should be used This appliance is not intended for use by young children or infirm persons unless they have been adequately supervised by a responsible person to ensure that they can use the appliance safely Young children should be supervised to ensure that they do not play with the appliance This appliance has to be connected to the plug endurable to proper power consumption This appliance has to be positioned so that the plug is accessible after installation Do not use processed water containing oil cream or lotion which is usually found in skin care shops or massage clinics e Otherwise this will cause the packing to be deformed which causes a malfunction or water leak A stainless washing tube does not usually rust However if some metal such as a hair pin is left in the tube for an extended time the tube could rust e Do not leave water or bleach containing chlorine in the tube for an extended period of time e Do not regularly use or leave water containing iron in the tube for an extended period of time f rust starts appearing on the surface of the tube apply a cleansing agent neutral to the surface and use a sponge or soft cloth to clean it Under no circumstances use a metal brush For washing machines with ventilation openings in the base that a carpet must not obstruct the openings Use
20. ort your laundry according to the following characteristics e Type of fabric care label symbol Sort laundry into cottons mixed fibers synthetics silks wools and rayon e Colour Divide whites and colours Wash new coloured items separately e Size Placing items of different sizes in the same load will improve the washing action e Sensitivity Wash delicate items separately using the Wool wash program for pure new wool curtains and silk articles Check the labels on the items you are washing or refer to the fabric care chart in the appendix Emptying pockets Coins safety pins and similar items can damage linen the washing machine drum and the water tank Securing fasteners Close zippers and fasten buttons or hooks loose belts or ribbons should be tied together Determining load capacity Do not overload the washing machine or your laundry may not wash properly Use the chart below to determine the load capacity for the type of laundry you are Aipune jo peo e BuiyseM 20 washing Load Capacity WF7704NA Fabric Type WE7702NA WF7602NA 0 WF7700NA VVF7600NA VVF7528NA WF7708NA VVF7608NA Cotton 7 0 kg 6 0 kg 5 2 kg Baby cotton 7 0 kg 6 0 kg 5 2 kg Synthetics 3 0 kg 3 0 kg 2 5 kg VVool 2 0 kg 2 0 kg 1 5 kg Detergent tips The type of detergent you should use is based on the type of fabric Cotton Baby cotton Synthetics Wool items colour wash temperature degree and
21. ted floor Installing the washing machine _4 Installing the washing machine ADJUSTING THE LEVELING FEET If the floor is uneven adjust the feet do not insert pieces of wood or any other objects under the feet 1 Loosen the leg bolt by turning it with your hand until it is at the desired height 2 Tighten the locking nut by turning it with the wrench e m e Place the washer on a sturdy flat surface If the washer is placed an uneven or weak surface noise or vibration occurs Only a 1 degrees angle is allowed REMOVING THE SHIPPING BOLTS Before using the washing machine you must remove all of the shipping bolts from the back of the unit To remove the bolts 1 Loosen all bolts with the wrench before removing them i 2 Take each bolt head and pull it through the wide part of the hole A Repeat for each bolt 48 3 Fill the holes with the supplied plastic covers 4 Keep the shipping bolts for future use CONNECTING THE WATER SUPPLY HOSE The water supply hose must be connected to the washing machine at one end and to the water faucet at the other Do not stretch the water supply hose If the hose is too short and you do not wish to move the water faucet replace the hose with a longer high pressure hose To connect the water supply hose 1 Take the L shaped arm fitting for the cold water supply hose a and connect to the cold water supply intake on the back of the ma
22. the new hose sets and old hose sets should not be reused This marking shown on the product or its literature indicates that it should not be disposed with other household wastes at the end of its working life To prevent possible harm to the environment or human health from uncontrolled waste disposal please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources Household users should contact either the retailer where they purchased this product or their local government office for details of where and how they can take this item for environmentally safe recycling Business users should contact their supplier and check the terms and conditions of the purchase contract This product should not be mixed with other commercial wastes for disposal Safety information _2 contents INSTALLING THE WASHING MACHINE WASHING A LOAD OF LAUNDRY MAINTAINING THE WASHING MACHINE TROUBLESHOOTING PROGRAMME CHART APPENDIX 3_ Contents 13 14 15 16 16 16 17 17 Unpacking the Washing Machine Overview of the washing machine Selecting a location Adjusting the leveling feet Removing the shipping bolts Connecting the water supply hose Positioning the drain hose Plugging in the machine Overview of the control panel Washing for the first time Putting detergent in the washing machine Washing clothes manually Selecting options Washing tips and hints
Download Pdf Manuals
Related Search