Home

Samsung 940T Computer Monitor User Manual

1. Install drivers gt gt AN Windows SyncMaster 940T 940Fn Install programs gt P BM Natural Color gt p Mgeta MagicTune bb C MagicRotation SyncMaster 940T 940Fn The color and appearance of the product may vary depending on the model and the product specifica tions are subject to change without prior notice for reasons of performance enhancement E Setup E Adjusting Your Monitor Troubleshooting Specifications Information E Introduction Notational Power Installation Clean Others l Notational Please read the following safety instructions as they are designed to prevent damage to property and harm to the user IT Warning Caution Failure to follow directions noted by this symbol could result in bodily harm or damage to the equipment gt w Notational Conventions Prohibited Important to read and understand at all times Do not disassemble Disconnect the plug from the outlet O HG Do not touch Ground to prevent an electric shock Notational Power Installation Clean Others l Power d When not used for an extended period of time set your computer to DPMS If using a screen saver set it to active screen mode The images here are for reference only and are not applicable in all cases or countries Shortcut to Anti Afterimage Instructions 2 Do not use a damaged or loose plug e This may cause electric shock or fire 2 Do not pull the
2. Play VESA DDC monitor found Check when MagicTune does not function properly MagicTune doesn t work properly MAC Have the Windows colors been set properly Has the video card been set properly Have you installed the monitor driver See the video card manual to see if the Plug amp Play VESA DDC function can be supported MagicTune feature is found only on PC VGA with Window OS that supports Plug and Play Have you changed your PC or video graphic card Did you install the program The maximum frequency per resolution may differ from product to product Windows ME 2000 XP Set the colors properly at the Control Panel Display Settings Set the video card by referring to the video card manual Install the monitor driver according to the Driver Installation Instructions Install the monitor driver according to the Driver Installation Instructions To check whether your PC is available for MagicTune feature follow the steps below When Windows is XP Control Panel 5 Performance and Maintenance gt System gt Hardware gt Device Manager gt Monitors gt After deleting Plug and Play monitor find Plug and Play monitor by searching new Hardware MagicTune is an additional software for the monitor Some graphic cards may not support your monitor When you have a problem with the graphic card visit our website to c
3. Refer to the Preset Timing Modes The screen can be unbalanced due to the cycle of the video card signals Readjust Position by referring to the OSD Have you adjusted the resolution or frequency on the monitor Is the frequency properly adjusted when checking the Display Timing on the Adjust the resolution and frequency of the video card Refer to the Preset Timing Modes Adjust the frequency properly by referring to the video card manual and the Preset Timing Modes There are only 16 colors shown on the screen The screen colors have changed after changing the video card There is a message that reads Unrecognized monitor Plug amp Play VESA DDC monitor found Check when MagicTune does not function properly MagicTune doesn t work properly MAC menu Have the Windows colors been set properly Has the video card been set properly Have you installed the monitor driver See the video card manual to see if the Plug amp Play VESA DDC function can be supported MagicTune feature is found only on PC VGA with Window OS that supports Plug and Play Have you changed your PC or video graphic card Did you install the program The maximum frequency per resolution may differ from product to product Windows ME 2000 XP Set the colors properly at the Control Panel Display Settings Set the video card by referring to the video card m
4. Visit the MagicRotation website for technical support for MagicRotation FAQs questions and answers and software upgrades Windows is registered trademark of Microsoft Corporation Inc E Safety Instructions o Check List SyncMaster 940Fn The color and appearance of the product may vary depending on the model and the product specifica tions are subject to change without prior notice for E Introduction reasons of performance enhancement E Setup E Adjusting Your Monitor UG Specifications E Information Self Test Feature Check Check List Q amp A CO Before calling for assistance check the information in this section to see if you can remedy PA any problems yourself If you do need assistance please call the phone number on the Information section or contact your dealer Symptom No images on the screen cannot turn on the monitor Check List Is the power cord connected properly Can you see Check Signal Cable on the screen If the power is on reboot the computer to see the initial screen the login screen which can be seen Can you see Not Optimum Mode Recommended Mode 1280 x 1024 60 Hz on the screen Solutions Check the power cord connection and supply Connected using the DVI A to D SUB cable Check the DVI A to DVI A to D SUB cable connection Connected using the DVI cable If you still see an error message on the scre
5. Choose your monitor model and click the Next button then click Next button Click the Finish button then the Close button If you can see the Digital Signature Not Found window then click the Yes button And click the Finish button then the Close button Microsoft Windows Millennium Operating System ALO D MISON ma ma Click Start Setting Control Panel Double click Display icon Select the Settings tab and click Advanced Properties button Select the Monitor tab Click the Change button in the Monitor Type area Choose Specify the location of the driver Choose Display a list of all the driver in a specific location then click Next button Click the Have Disk button Specify A D driver then click OK button Select Show all devices and choose the monitor that corresponds to the one you connected to your computer and click OK Continue choosing Close button and OK button until you close the Display Properties dialogue box Microsoft Windows NT Operating System KHAN Click Start Settings Control Panel and then double click Display icon 2 In Display Registration Information window click Settings Tab and then click All Display Modes 3 Select a mode that you wish to use Resolution Number of colors and Vertical frequency and then click OK 4 Click Apply button if you see the screen working normally after clicking Test If the scr
6. HAS Stand 2 Manual User s Guide Warranty Card Monitor Driver Quick Setup Guide Not available in all Natural Color software locations MagicTune software MagicRotation software 2 Cable D sub Cable Power Cord DVI Cable option Front 1 MENU button M o MagicBright aa Unpacking Front Rear SAMSUNG A ii hw F Ube o 4 3 Opens the OSD menu Also use to exit the OSD menu or return to the previous menu MagicBright is a new feature providing optimum viewing environment depending on the contents of the image you are watching Currently seven different modes are available Custom Text Internet Game Sport Movie and Dynamic Contrast Each mode has its own pre configured brightness value You can easily select one of seven settings by simply pressing MagicBright control button 1 Custom Although the values are carefully chosen by our engineers the pre configured values may not be comfortable for your eyes depending on your taste If this is the case adjust the brightness and contrast by using the OSD menu 2 Text For documentations or work involving a lot of text 3 Internet For working with a mixture of images such as text and graphics 4 Game For watching motion pictures such as a game 5 Sport For watching motion pictures such as a sport 6 Movie For watching motion pictures such as a DVD or Video CD 7 Dynamic Contrast Dynamic Contrast is to automatically detect distributi
7. Plog and P loy Monitor and A Prophet NI Proporta Ci ones al Cave a Samgung aiii eE e 87 122001 10an Pii fg phg Dover Dalada To vira dekada abo tho dre hlos To jana ih dare la tree Auna Bol Back Driver if ce coma fads after updlaling thee drives rol back bo ina Ger sai Ll ery gel Te minaali the dre Advanced Monitor driver installation is completed 9 Microsoft Windows 2000 Operating System DO ed CO When you can see Digital Signature Not Found on your monitor follow these steps Choose OK button on the Insert disk window Click the Browse button on the File Needed window Choose A D Driver then click the Open button and then click OK button How to install Click Start Setting Control Panel Double click the Display Icon Choose the Settings tab and then click Advanced Choose Monitor Case1 If the Properties button is inactive it means your monitor is properly configured Please stop installation Casez2 If the Properties button is active click the Properties button then follow next steps continually Click Driver and then click on Update Driver then click on the Next button Choose Display a list of the known drivers for this device so that can choose a specific driver then click Next and then click Have disk Click the Browse button then choose A D Driver Click the Open button then click OK button
8. Select the model that matches your monitor from the list of monitor models on the Screen NG click Next Sele the naton driver you ward te inpiall fee this hardware ge hereto rv waka en aa Fp pt aa re dok 10 Click Close Close OK OK on the following screens displayed in oon x Sarbung Ta haan as ad Pa ee His dapilay correetiy HAHAA MAGNA MAE ot This is my mun maator EI tend the desktop onto thn montor 2 Microsoft Windows XP Operating System 1 Insert CD into the CD ROM driver 2 Click Start gt Control Panel then click the Appearance and Themes Icon Pi ms poe To Hl Od Sue Bum T a Ert erre ca Pay Cerrar Interot Caper E 7 z wi tT LE gt Piy Bermes Cee eee Ssuthods Capra a gt Pye Fie baer a HET Co ES ry mumie i oo W Part amp Windows Pedis MPlayer gt iy Doce ear te Printera Ardi Fa es w3 MM Keplorar lt 2 kimp and Support Eon R J Search g EEF Foun 0 Programs Le PAP Qa D FF Dre Ewe T DE la gp ka kaaa a a ee D baal Peg ore Poy ara core DOF rte fll Gaan dee lt r Grim pasy e D Mee reren eea 1024 be 76O pirola i Hug and Play Monitor and 30 Prophet Ill Properties r Davka aa C Hide modes that this morito daplay OCT air G re Iyon ata haing peoblems paih iha denice click Ticubleshoot la 5 Click Update Driver and select Install from a list or then click Next b
9. check the information in this section to see if you can remedy PA any problems yourself If you do need assistance please call the phone number on the Information section or contact your dealer Symptom No images on the screen cannot turn on the monitor Check List Is the power cord connected properly Can you see Check Signal Cable on the screen If the power is on reboot the computer to see the initial screen the login screen which can be seen Can you see Not Optimum Mode Recommended Mode 1280 x 1024 60 Hz on the screen Solutions Check the power cord connection and supply Connected using the D sub cable Check the signal cable connection Connected using the DVI cable If you still see an error message on the screen when the monitor is connected properly check to see if the monitor status is set to analog Press button to have the monitor double check the input signal source If the initial screen the login screen appears boot the computer in the applicable mode the safe mode for Windows ME XP 2000 and then change the frequency of the video card Refer to the Preset Timing Modes Note If the initial screen the login screen does not appear contact the Service Center or your dealer You can see this message when the signal from the video card exceeds the maximum resolution and frequency that the monitor can handle properly Adjust the maximum resolution and
10. kHz 31 469 31 469 31 469 35 000 49 726 68 681 37 861 37 500 35 156 37 879 48 077 46 875 48 363 56 476 60 023 67 500 63 981 79 976 Hz 70 086 59 940 70 087 66 667 74 551 75 062 72 809 75 000 56 250 60 317 72 188 75 000 60 004 70 069 75 029 75 000 60 020 75 025 Horizontal Frequency MHz 25 175 25 175 28 322 30 240 57 284 100 00 31 500 31 500 36 000 40 000 50 000 49 500 65 000 75 000 78 750 108 000 108 000 135 000 H V The time to scan one line connecting the right edge to the left edge of the screen horizontally is called the Horizontal Cycle and the inverse number of the Horizontal Cycle is called the Horizontal Frequency Unit kHz Vertical Frequency Like a fluorescent lamp the screen has to repeat the same image many times per second to display an image to the user The frequency of this repetition is called the Vertical Frequency or Refresh Rate Unit Hz SyncMaster 940T 940Fn The color and appearance of the product may vary depending on the model and the product specifica tions are subject to change without prior notice for reasons of performance enhancement E Safety Instructions Introduction MM Setup E Adjusting Your Monitor Troubleshooting Specifications Information Contact SAMSUNG WORLDWIDE Terms ForBetter Display Authority Correct Disposal Contact SAMSUNG WORLDWIDE CO If you have any questions or comments rel
11. www samsung com my PHILIPPINES 1800 10 SAMSUNG 7267864 http www samsung com ph SINGAPORE 1800 SAMSUNG 7267864 http www samsung com sg THAILAND 1800 29 3232 02 689 3232 http www samsung com th TAIWAN 0800 329 999 http www samsung com tw VIETNAM 1 800 588 889 http www samsung com vn Middle East 8 Africa SOUTH AFRICA 0860 7267864 SAMSUNG http www samsung com za U A E 800SAMSUNG 7267864 8000 4726 http www samsung com mea Contact SAMSUNG WORLDWIDE Terms For Better Display Authority Correct Disposal Terms Q Dot Pitch The image on a monitor is composed of red green and blue dots The closer the dots the higher the resolution The distance between two dots of the same color is called the Dot Pitch Unit mm Vertical Frequency The screen must be redrawn several times per second in order to create and display an image for the user The frequency of this repetition per second is called Vertical Frequency or Refresh Rate Unit Hz Example If the same light repeats itself 60 times per second this is regarded as 60 Hz Horizontal Frequency The time to scan one line connecting the right edge to the left edge of the screen horizontally is called Horizontal Cycle The inverse number of the Horizontal Cycle is called Horizontal Frequency Unit kHz Interlace and Non Interlace Methods Showing the horizontal lines of the screen from the top to the bottom in order is called the Non Interla
12. www samsungmonitor com cn China 1 Insert CD into the CD ROM drive 2 Click Windows 3 Choose your monitor model in the model list then click the OK button 0 SAMSUNG monitor installer Selina the moadonshich you naan bo intall 4 If you can see following message window then click the Continue Anyway button Then click OK button Microsoft Windows XP Operating System Hardware Installation The software pou ane mabaling foo this hardware Samsung aoe has not passed Windows Logo besting to werily its compatiblity wath windows XP Te thes besing is imputar Continuing your installation of this software may impair or destabilize the conect operation of your system ether immediately of in the future Mictozoall strongly recommends that you stop this installation now and contact the hardware vendor for software that has passed Windows Logo testing This monitor driver is under certifying MS logo and this installation don t damage your system The certified driver will be posted on Samsung Monitor homepage http www samsung com 5 Monitor driver installation is completed Connecting the Monitor Using the Stand Installing the Monitor Driver Installing the Monitor Driver Natural Color Automatic Manual Installing the Monitor Driver Manual Windows Vista Windows XP Windows 2000 Windows ME Windows NT Linux CO When prompted by the operating system for the monitor driver i
13. Using the DVI Digital connector on the video card Connect the DVI Cable to the DVI IN port on the back of your monitor s8 Connected to a Macintosh Connect the monitor to the Macintosh computer using the D sub connection cable Ko If the monitor and the computer are connected you can turn them on and use them E Connecting the Monitor Using the Stand Installing the Monitor Driver Installing the Monitor Driver Natural Color Automatic Manual Using the Stand HAS Stand BALEHE echeFe A Stand Stopper Attaching a Base This monitor accepts a 100 mm x 100 mm VESA compliant mounting interface pad SAM Uo Monitor Mounting interface pad Sold separately Turn off your monitor and unplug its power cord 2 Lay the LCD monitor face down on a flat surface with a cushion beneath it to protect the screen 3 Remove four screws and then remove the stand from the LCD monitor 4 Align the mounting interface pad with the holes in the rear cover mounting Pad and secure it with four screws that came with the arm type base wall mount hanger or other base e Do not use screws longer than the standard dimension as they may damage the inside A of the Monitor e For wall mounts that do not comply with VESA standard screw specifications the length of the screws may differ depending on their specifications e Do not use screws that do not comply with the VESA standard screw specifica
14. been set properly Have you changed the video card or the driver Have you adjusted the resolution or frequency to the monitor Hz a Not Optimum Mode Recommended Mode 1280 x 1024 60 Hz message is displayed If the display exceeds 85 Hz the display will work properly but the Not Optimum Mode Recommended Mode 1280 x 1024 60 Hz message appears for one minute and then disappears Please change to the recommended mode during this one minute period The message is displayed again if the system is rebooted The monitor is in PowerSaver mode press a key on the keyboard to activate the monitor and restore the image on the screen If there is still no image press the button Then press any key on the keyboard again to activate the monitor and restore the image on the screen You may get a blank screen if you boot the system before you connect the DVI cable or disconnect and then reconnect the DVI cable while the system is running as certain types of graphic cards do not send out video signals Connect the DVI cable and then reboot the system Unlock the OSD by pressing the MENU button for at least 5 seconds Check the signal cable connection Make sure the video card is fully inserted in it s slot Reboot the computer Set the video card by referring to the video card manual Adjust screen image position and size using the OSD Adjust the resolution and frequency at the video card
15. com monitor U S A http www sec co kr monitor Korea http www samsungmonitor com cn China Microsoft Windows Vista Operating System 1 Insert your Manual CD into your CD ROM drive 2 Click J Start and Control Panel Then double click on Appearance and Personalization am g EE ps pon NG a ns 3 Click Personalization and then Display Settings bm ie ee ai lamya aa tS ee BEN a ee oe eee ee er ee ese pee Pa ima saran ay ee a Tas NG bye p pime a apa ee ee G pa km ki m gt iian ii a ag ap L muger ar ee ee e ee a im pa ee ee ee ee R T ba er ma mem eer ee oe 4 Click Advanced Settings L ltp Meriter ba PENA Gohirio big LE Hierin Corp to Color Hh aghast GAP bat 5 Click Properties in the Monitor tab If the Properties button is deactivated it means the configuration for your monitor is completed The monitor can be used as is If the message Windows needs is displayed as shown in the figure below BO Hat a peje eh a a ALA ay Gearing Bin check bem kios you ko ale day moda Fat Ha al Continue meat cannot dapi cinei y Thee imiy lead 69 an usable apa alio gamed hor ghar p This monitor driver is under certifying MS logo and this installation doesn t Pani damage your system The certified driver will be posted on Samsung Monitor homepage http www samsung com rar NG ee rete Dia
16. driver is under certified MS logo and this installation doesn t damage your system The certified driver will be posted on Samsung Monitor homepage http www samsung com 9 Click the Close button then click OK button continually 10 Hardyearo Update Wizard Completing the Hardware Update Wizard The vated kant feted rth the oeri koi Earisung saan ni Plog and P loy Monitor and A Prophet NI Proporta Ci ones al Cave a Samgung aiii eE e 87 122001 10an Pii fg phg Dover Dalada To vira dekada abo tho dre hlos To jana ih dare la tree Auna Bol Back Driver if ce coma fads after updlaling thee drives rol back bo ina Ger sai Ll ery gel Te minaali the dre Advanced Monitor driver installation is completed 9 Microsoft Windows 2000 Operating System DO ed CO When you can see Digital Signature Not Found on your monitor follow these steps Choose OK button on the Insert disk window Click the Browse button on the File Needed window Choose A D Driver then click the Open button and then click OK button How to install Click Start Setting Control Panel Double click the Display Icon Choose the Settings tab and then click Advanced Choose Monitor Case1 If the Properties button is inactive it means your monitor is properly configured Please stop installation Casez2 If the Properties button is active click the Properties butto
17. et y s nap a ip Description This is the function that locks the OSD in order to keep the current states of settings or prevent others from adjusting the current settings Lock Hold down the menu button for more than five seconds to activate the OSD adjustment lock function Unlock Hold down the menu button for more than five seconds to deactivate the OSD adjustment lock function Though the OSD adjustment lock function is activated you can still adjust the brightness and contrast and adjust MagicBright L using the Direct button MagicBright MENU Menu Description Push the MagicBright button to circle through available preconfigured pa NGA modes MagicBright _ Seven different modes Custom T ext Internet Game Sport Movie Dynamic Contrast Brightness Menu Description Brightness When OSD is not on the screen push the button to adjust brightness SOURCE MENMU Menu Description SOURCE Selects the video signal while the OSD is off User Control Buttons Direct Functions OSD Functions slice MagicTune DQ MagicRotation BI Picture Brightness MagioColor Color Contra E image Coarse Fine Sharpness H Position V Position BOSD Language HPoson V Positon Transparency _ Dispiay Time IM setup Auto Source Image Resat Color Rese OB Information O Picture F Menu Description Play Stop Brightness You can use the on screen menus to chang
18. frequency that the monitor can handle properly If the display exceeds SXGA or 75 Hz a Not Optimum cannot see the On Screen Display The screen shows strange colors or just black and white The screen suddenly has become unbalanced The screen is out of focus or OSD cannot be adjusted LED is blinking but no images on the screen There is no image on the screen Is the power indicator on the monitor blinking at 1 second intervals Connected using the DVI cable Have you locked the On Screen Display OSD Menu to prevent changes Is the screen displaying only one color as if looking at the screen through a cellophane paper Have the screen colors become strange after running a program or due to a crash between applications Has the video card been set properly Have you changed the video card or the driver Have you adjusted the resolution or frequency to the monitor Mode Recommended Mode 1280 x 1024 60 Hz message is displayed If the display exceeds 85 Hz the display will work properly but the Not Optimum Mode Recommended Mode 1280 x 1024 60 Hz message appears for one minute and then disappears Please change to the recommended mode during this one minute period The message is displayed again if the system is rebooted The monitor is in PowerSaver mode press a key on the keyboard to activate the monitor and restore the image on the screen If there is st
19. in luminance Black 4 White Grey Ex SYSTEM 245 e Recommended settings Bright colors with little difference in luminance Change the characters color and background color every 30 minutes Ex SYSTEM 245 SYSTEM 245 STATUS OK STATUS OK Every 30 minutes change the characters with movement AA Yc he PUYAT KA1710 12 00 KA1710 12 00 UA0110 13 30 PASIP 184 19 LIAN11N 12 2N AA0002 14 00 FA7777 14 15 2 The best way to protect your monitor from Image retention is to set your PC or System to operate a Screen Saver program when you are not using it Image retention may not occur when a LCD panel is operated under normal conditions Normal conditions are defined as continuously changing video patterns When the LCD panel is operated for a long time with a fixed pattern over 12 hours there may be slight difference in voltage between electrodes that work the liquid crystal LC ina pixel The voltage difference between electrodes increases with time forcing the liquid crystal to lean When this occurs the previous image may be seen when the pattern is changed To prevent this the accumulated voltage difference must be decreased Common Electrode ITO Black Matrix Color Filter Gate Pixel Electrode Storage Capacitor ITO Cs Our LCD Monitor satisfies ISO13406 2 Pixel fault Class II Correct Disposal of This Product Waste Electrical amp Electronic Equipment Europ
20. or a Not Optimum Mode Recommended Mode 1280 x 1024 60 Hz message comes up disconnect the cable from the computer while the monitor is still powered on o If there is a message coming up on the screen or if the screen goes white this means the monitor is in working condition o In this case check the computer for trouble SyncMaster 940Fn The color and appearance of the product may vary depending on the model and the product specifica tions are subject to change without prior notice for reasons of performance enhancement E Safety Instructions Introduction M Setup E Adjusting Your Monitor E Troubleshooting General PowerSaver Preset Timing Modes General General Model Name SyncMaster 940Fn LCD Panel Size 19 inch 48 cm Display area 376 32 mm H x 301 056 mm V Pixel Pitch 0 294 mm H x 0 294 mm V Synchronization Horizontal 30 kHz 81 kHz Vertical 56 Hz 75 Hz Display Color 16 7M Resolution Optimum resolution 1280 x 1024 60 Hz Maximum resolution 1280 x 1024 75 Hz Input Signal Terminated RGB Analog DVI Digital Visual Interface Compliant Digital RGB 0 7 Vp p t 5 Ho separate H V sync Composite SOG TTL level V high 2 0 V V low lt 0 8 V Maximum Pixel Clock 136 8 MHz Analog Digital Power Supply AC 100 240 V 10 50 60 Hz Signal Cable DVI I to 15pin D sub cable Detachable DVI D to DVI D connector Detachable Dimensions WxHxD Weight 416 6 X 377 5 X 6
21. plug out by the wire nor touch the plug with wet hands e This may cause electric shock or fire 2 Use only a properly grounded plug and receptacle e An improper ground may cause electric shock or equipment damage Class Equipment only 2 Insert the power plug firmly so that it does not come loose e A bad connection may cause fire 2 Do not excessively bend the plug and wire nor place heavy objects upon them which could cause damage e This may cause electric shock or fire 2 Do not connect too many extension cords or plugs to one outlet e This may cause fire 2 Do not disconnect the power cord while using the monitor e A surge may be caused by the separation and may damage the monitor 2 Do not use the power cord when the connector or plug is dusty e f the connector or plug of the power cord is dusty clean it with a dry cloth e Using the power cord with a dusty plug or connector may cause electric shock or fire 2 To disconnect the apparatus from the mains the plug must be pulled out from the mains socket therefore the mains plug shall be readily operable e This may cause electric shock or fire Installation i Notational Power Installation Clean Others Be sure to contact an authorized Service Center when installing your monitor in a location with heavy dust high or low temperatures high humidity and exposed to chemical substances and where it operates for 24 hours
22. samsung com cz Samsung Zit Ceska organiza n slo ka yskocilova 4 14000 Praha 4 70 70 19 70 030 6227 515 3260 SAMSUNG 7267864 0 15 min 01805 121213 0 14 Min 06 80 SAMSUNG 7267864 800 SAMSUNG 7267864 0032 0 2 201 24 18 0900 20 200 88 0 10 Min 815 56 480 0 801 801 881 80 8 200 128 0818 717 100 0800 SAMSUNG 7267864 902 10 11 30 0771 400 200 0800 7267864 0870 SAMSUNG 7267864 800 7267 800 7267 8 800 77777 8 800 080 1188 8 800 200 0400 8 800 502 0000 140 1234 Asia Pacific 1300 362 603 800 810 5858 010 6475 1880 3698 4698 3030 8282 1800 1100 11 0800 112 8888 0120 327 527 1800 88 9999 http www samsung com dk http www samsung com fi http www samsung com fr http www samsung de http www samsung com hu http www samsung convit http www samsung lu http www samsung com nl http www samsung com no http www samsung com pl http www samsung com pt http www samsung com uk http www samsung com sk http www samsung com es http www samsung com se http www samsung com ch http www samsung com uk http www samsung ee http www samsung com lv http www samsung It http www samsung kz http www samsung ru http www samsung com ur http www samsung Uuz http www samsung com au http www samsung com cn http www samsung com hk http www samsung com in http www samsung com id http www samsung com jp http
23. soft dry cloth e Do not use any chemicals such as wax benzene alcohol thinners insecticide air freshener lubricant or detergent 2 Contact the SAMSUNG customer care center or Customer Center for interior cleaning once a year e Keep the product s interior clean Dust which has accumulated in the interior over an extended period of time may cause a malfunction or fire Notational Power Installation Clean Others O aa 2 Do not remove the cover or back e This may cause electric shock or fire e Refer to a qualified servicing company 2 If your monitor does not operate normally in particular if there is any unusual sound or smell coming from the monitor unplug it immediately and contact an authorized dealer or the Service Center e This may cause electric shock or fire 2 Keep the product away from places exposed to oil smoke or moisture do not install inside a vehicle e This may cause a malfunction electric shock or fire e In particular avoid operating the monitor near water or outdoors where the monitor could be exposed to snow or rain 2 If the monitor is dropped or the casing is damaged turn the monitor off and unplug the power cord Then contact the Service Center e The monitor may malfunction causing electric shock or fire 2 Disconnect the plug from the outlet during storms or lightning or if it is not used for a long period of time e Failure to do so may cause electric sh
24. such as at airports train stations etc Failure to do so may cause serious damage to your monitor 2 Place your monitor in a location with low humidity and a minimum of dust e Failure to do so may cause electric shock or fire inside the monitor 2 Do not drop the monitor when moving it e This may cause damage to the product or the person carrying it Install the monitor base in a showcase or shelf so that the end of the base does not protrude from the showcase or shelf e Dropping the product may cause damage to the product or the person carrying it 2 Do not place the product on an unstable or small surface area e Place the product on an even and stable surface as the product may fall and cause harm to someone walking by specifically children 2 Do not place the product on the floor e Take care as someone specifically children may trip over it 2 TO PREVENT THE SPREAD OF FIRE KEEP CANDLES OR OTHER OPEN FLAMES AWAY FROM THIS PRODUCT AT ALL TIMES e Otherwise this may cause fire A melted coating may cause electric shock or fire 2 Keep any heating devices away from the power cable e A melted coating may lead to electric shock or fire 2 Do not install the product in places with poor ventilation for instance a bookshelf closet etc e Any increase in the internal temperature may cause fire 2 Put down the monitor carefully e Failing to do so may damage the monitor 2 Do not place the m
25. typo Hiiri ed E ET Seated mier aial Laranor an ADA Gece KONO LE iieri Gorges Geaa in a z p ri nee sin To waaa daimiu ghoul Sha ceiver flies To updater hag graer mee How hn danica Ea drvca eh ofa eat Bhp Spr roll BEOR NG a pemu maa Ces inaina fe gated ai j Tauningal Fa diar Abaca 7 Check the Browse my computer for driver software checkbox and click Let me pick from a list of device drivers on my computer Hagar O AU A MCA ka Gere paan Tamh m chow aala Ba i id Search sutomatiially tee epdated driver pitani area AN a mial Bn Feras Pees Ber Lebel feeds iat Paa ae eee LF petal naina La man pick trom a lint of device Grivert on niy Computer ra Bi al an ra dere ka paa a kar sere aril all deer kaaa r jbr ipnr gery ee re 8 Click Have Disk and select the folder for example D Drive where the driver setup file is located and click OK Splet the divans direst buan ln bal Pee thig hanan Pa mar ieee ra Hala ch rin sa wa grr ngaa Pipa Eara ilan Pol lean Pa a piy i ia ree Ze Sika Hina 9 Select the model that matches your monitor from the list of monitor models on the Screen NG click Next Sele the naton driver you ward te inpiall fee this hardware ge hereto rv waka en aa Fp pt aa re dok 10 Click Close Close OK OK on the following screens displayed in oon x Sarbung Ta haan as ad Pa ee His dapilay correetiy HAHA
26. used in all areas including common residential areas Class B equipment emits less electromagnetic waves than Class A equipment General PowerSaver Preset Timing Modes 9 PowerSaver This monitor has a built in power management system called PowerSaver This system saves energy by switching your monitor to low power mode when it has not been used for a certain amount of time The monitor automatically returns to normal operation when you press a key on the keyboard For energy conservation turn your monitor OFF when it is not needed or when leaving it unattended for long periods The PowerSaver system operates with a VESA DPMS compliant video card installed in your computer Use the software utility installed on your computer to set up this feature Power off State Normal Operation Power saving mode EPA ENERG Y 2000 Power Indicator Blue Blue Blinking off Less than Less than Less than Power Consumption 40 Watts 1 5 Watts 1 2 Watts General PowerSaver Preset Timing Modes Preset Timing Modes If the signal transferred from the computer is the same as the following Preset Timing Modes the screen will be adjusted automatically However if the signal differs the screen may go blank while the power LED is on Refer to the video card manual and adjust the screen as follows Table 1 Preset Timing Modes Horizontal Vertical Frequency Pixel Clock Sync Polarity Display Mode Frequency IBM 640 x 350 IBM 640 x 48
27. 0 IBM 720 x 400 MAC 640 x 480 MAC 832 x 624 MAC 1152 x 870 VESA 640 x 480 VESA 640 x 480 VESA 800 x 600 VESA 800 x 600 VESA 800 x 600 VESA 1024 x 768 VESA 1024 x 768 VESA 1024 x 768 VESA 1152 x 864 VESA 1280 x 960 VESA 1280 x 1024 VESA 1280 x 1024 kHz 31 469 31 469 31 469 35 000 49 726 68 681 37 861 37 500 35 156 37 879 48 077 48 363 56 476 60 023 67 500 60 000 63 981 79 976 Hz 70 086 59 940 70 087 66 667 74 551 75 062 72 809 75 000 56 250 60 317 72 188 60 004 70 069 75 029 75 000 60 000 60 020 75 025 Horizontal Frequency MHz 25 175 25 175 28 322 30 240 57 284 100 000 31 500 31 500 36 000 40 000 50 000 65 000 75 000 78 750 108 000 108 000 108 000 135 000 H V The time to scan one line connecting the right edge to the left edge of the screen horizontally is called the Horizontal Cycle and the inverse number of the Horizontal Cycle is called the Horizontal Frequency Unit kHz Vertical Frequency Like a fluorescent lamp the screen has to repeat the same image many times per second to display an image to the user The frequency of this repetition is called the Vertical Frequency or Refresh Rate Unit Hz SyncMaster 940T The color and appearance of the product may vary depending on the model and the product specifica tions are subject to change without prior notice for reasons of performance enhancement E Safety Instr
28. 4 2 mm 16 4 X 14 9 X 2 5 inch Without Stand 416 6 X 420 6 X 200 0 mm 16 4 X 16 6 X 7 9 inch With Stand 6 7 kg 14 8 Ibs VESA Mounting Interface 100 mm x 100 mm for use with Specialty Arm Mounting hardware Environmental considerations Operating Temperature 50 F 104 F 10 C 40 C Humidity 10 80 non condensing Storage Temperature 4 F 113 F 20 C 45 C Humidity 5 95 non condensing Plug and Play Capability This monitor can be installed on any Plug amp Play compatible system The interaction of the monitor and the computer systems will provide the best operating conditions and monitor settings In most cases the monitor installation will proceed automatically unless the user wishes to select alternate settings Dot Acceptable TFT LCD panels manufactured by using advanced semiconductor technology with precision of 1ppm one millionth above are used for this product But the pixels of RED GREEN BLUE and WHITE color appear to be bright sometimes or some black pixels may be seen This is not from bad quality and you can use it without any problelms e For example the number of TFT LCD sub pixels contained in this product are 3 932 160 Note Design and specifications are subject to change without prior notice Class B Equipment Information Communication equipment for residential use This product complies with the Electromagnetic Compatibility Directives for residential use and can be
29. A MAGNA MAE ot This is my mun maator EI tend the desktop onto thn montor 2 Microsoft Windows XP Operating System 1 Insert CD into the CD ROM driver 2 Click Start gt Control Panel then click the Appearance and Themes Icon Pi ms poe To Hl Od Sue Bum T a Ert erre ca Pay Cerrar Interot Caper E 7 z wi tT LE gt Piy Bermes Cee eee Ssuthods Capra a gt Pye Fie baer a HET Co ES ry mumie i oo W Part amp Windows Pedis MPlayer gt iy Doce ear te Printera Ardi Fa es w3 MM Keplorar lt 2 kimp and Support Eon R J Search g EEF Foun 0 Programs Le PAP Qa D FF Dre Ewe T DE la gp ka kaaa a a ee D baal Peg ore Poy ara core DOF rte fll Gaan dee lt r Grim pasy e D Mee reren eea 1024 be 76O pirola i Hug and Play Monitor and 30 Prophet Ill Properties r Davka aa C Hide modes that this morito daplay OCT air G re Iyon ata haing peoblems paih iha denice click Ticubleshoot la 5 Click Update Driver and select Install from a list or then click Next button Pligg and Play Monitor Pio par bis T di Hardware Update Wizard SS Cena Cee Welcome to the Hardware Update wa Fhag araj Fisy kA cont on i ho Wirard Dumas Pravicdes hierer Tiia winaed hepa ou inatall iasa for Caves Pako er es Pig armel Play Morde Dua Yes or 1 10 Digtal Segarra Micro wd edo NT Pabalan Paa aap a ala ll Wee hi la
30. For energy conservation turn your monitor OFF when it is not needed or when leaving it unattended for long periods Unpacking Front Rear Rear BAM S UML The configuration at the back of the monitor may vary from product to product Oo POWER port Connect the power cord for your monitor to the power port on the back of the monitor O O DVI IN port Connect the DVI Cable to the DVI Port on the back of your Monitor Connect the DVI A to D SUB Cable to the DVI IN port on the back of your monitor O Power on off Switch Use this button for turn the monitor on and off option Kensington Lock The Kensington lock is a device used to physically fix the system to something when using it in a public place The locking device has to be purchased separately For using a locking device contact the place of purchase See Connecting the Monitor for further information regarding cable connections SyncMaster 940T The color and appearance of the product may vary depending on the model and the product specifica tions are subject to change without prior notice for reasons of performance enhancement Safety Instructions Titra E Setup E Adjusting Your Monitor Troubleshooting Specifications E Information Unpacking Front Rear Please make sure the following items are included with your monitor If any items are missing contact your dealer Contact a local dealer to buy optional items Unpacking
31. To mount the monitor on a wall you should purchase the wall mounting kit that allows you to mount the monitor at least 10cm away from the wall surface Contact the nearest Samsung Service Center for more information Samsung Electronics will not be responsible for damages caused by using a base other than those specified e Please use Wall Mount according to the International standards gt Connecting the Monitor Using the Stand Installing the Monitor Driver Installing the Monitor Driver Natural Color Automatic Manual Installing the Monitor Driver Automatic x When prompted by the operating system for the monitor driver insert the CD ROM NA included with this monitor Driver installation is slightly different from one operating system to another Follow the directions appropriate for the operating system you have Prepare a blank disk and download the driver program file at the Internet web site shown below e Internet web site http www samsung com Worldwide http www samsung com monitor U S A http www sec co kr monitor Korea http www samsungmonitor com cn China 1 Insert CD into the CD ROM drive 2 Click Windows 3 Choose your monitor model in the model list then click the OK button 0 SAMSUNG monitor installer Selina the moadonshich you naan bo intall 4 If you can see following message window then click the Continue Anyway button Then click OK button Microsoft Win
32. Ugasis Durie Tainga thee diea dow lee cherie Whaa che poea iad Hines weed Lin de w the anfhewane gutortically Recommended j Pikes doe Maila sier upakabing ihe drives roll zs Irak Bol task Driver Beak tothe previcuse ro oe dove i natal bon a let of penie kalan advanced Urdvatet O Total tho chives pha Dick Next lo continue e E a Co If pour hacdwase come with an installation CD Lua ot hope disk maa ob nog 6 Select Don t search I will then click Next and then click Have disk Hardware Update Wizard Hardware Update Wizard Piesce chooce pee ceanch and mctlallation opin aa Sellen the devine dived piu want bo aatal Na this haniaaie 21 esch iy tha beat diwa in hese kean ii Gees the marilag ae model of your hada diaa ond then chek Hasi yous hase a dak that conina they dieser wou want lo inelall obo Hawa Cink Loe thee cheek Expert bako ka kmi cn aqua the default search which include boa pathi arei servers ede mihia Thi bett dere loud ball be nc alent el hoes gompahbia Pescara Minda Da nag and Pap Honto o search val choose the drive bo rata Choose this cp bon fo sieni the deae dre homa ki Wirde doss ment queens that She dte pow choco val ba iha bast makah for you hace GF Thai herent ni Agay gna Tail ma wher de maning in impake 7 Click the Browse button then choose A D Driver and choose your monitor model in the model list and click the Next button install Fr
33. ality If you are changing your Graphic Card it is recommended that you uninstall the MagicRotation Software before doing so System Requirements OS Windows 98 SE Windows Me Windows NT 4 0 Windows 2000 Windows XP Home Edition Windows XP Professional e Windows Vista Hardware e 128MB Memory above recommended e 25MB Free Hard disk space above Service Packs e It is recommended that your System has the latest Service Pack installed e For Windows NT 4 0 it is recommended to install Internet Explorer 5 0 and above with Active Desktop component For more information visit the MagicRotation website Windows is registered trademark of Microsoft Corporation Inc Uninstall The MagicRotation program can be removed only by using the Add Remove Programs option of the Windows Control Panel Perform the following steps to remove MagicRotation 1 Goto Task Tray Start Settings and select Control Panel in the menu If the program runs on Windows XP go to Control Panel in the Start menu 2 Click the Add Remove Programs icon in Control Panel 3 In the Add Remove Programs screen scroll down to find MagicRotation Click on it to highlight it 4 Click the Change Remove button to remove the program 5 Click Yes to begin the uninstall process 6 Wait until the Uninstall Complete dialog box appears 7 After uninstall restart the system to complete the uninstallation
34. ange without prior notice for reasons of performance enhancement E Adjusting Your Monitor Safety Instructions ue a Setup E Troubleshooting Specifications E Information Unpacking Front Rear Please make sure the following items are included with your monitor If any items are missing contact your dealer Contact a local dealer to buy optional items Unpacking HAS Stand Manual User s Guide Warranty Card Monitor Driver Quick Setup Guide Not available in all Natural Color software locations MagicTune software MagicRotation software 2 Cable DVI A to D sub Cable Power Cord DVI Cable Front Unpacking Front Rear D MENU button M 9 MagicBright aa O 1 2 3 4 5 SAMSUNG wee amp amp amp Opens the OSD menu Also use to exit the OSD menu or return to the previous menu MagicBright is a new feature providing optimum viewing environment depending on the contents of the image you are watching Currently seven different modes are available Custom Text Internet Game Sports Movie and Dynamic Contrast Each mode has its own pre configured brightness value You can easily select one of seven settings by simply pressing MagicBright control button 1 Custom Although the values are carefully chosen by our engineers the pre configured values may not be comfortable for your eyes depending on your taste If this is the case adjust the brightness and con
35. anual Install the monitor driver according to the Driver Installation Instructions Install the monitor driver according to the Driver Installation Instructions To check whether your PC is available for MagicTune feature follow the steps below When Windows is XP Control Panel 5 Performance and Maintenance gt System gt Hardware gt Device Manager gt Monitors gt After deleting Plug and Play monitor find Plug and Play monitor by searching new Hardware MagicTune is an additional software for the monitor Some graphic cards may not support your monitor When you have a problem with the graphic card visit our website to check the compatible graphic card list provided http www samsung com monitor magictune Download the latest program The program can be downloaded http www samsung com monitor magictune Reboot the computer after installing the program for the first time If a copy of the program is already installed remove it reboot the computer and then install the program again You need to reboot the computer for it to operate normally after installing or removing the program Visit the MagicTune website and download the installation software for MagicTune Check the following items if there is trouble with the monitor NI Check if the power cord and the video cables are properly connected to the computer Check if the computer beeps more than 3 times when bo
36. ars click Next Select I accept the terms of the license agreement to accept the terms of use Choose a folder to install the MagicRotation program Click Install The Setup Status window appears Click Finish Have to reboot the system in order for the MagicRotation to work properly When the installation is complete the MagicRotation executable icon appears on your desktop O Installation Problems The installation of MagicRotation can be affected by the factors such as video card motherboard and the network environment Limitation The Display Driver should be properly loaded for the MagicRotation to work properly The installed Display Driver should be the latest driver supplied by the vendor If some applications like Windows Media Player Real Player etc are not displaying movie files properly in 90 180 and 270 orientations then do the following o Close the application o Select the Orientation 90 180 270 you want to view the application o Relaunch the application In most cases this should fix the problem User Applications using OpenGL and DirectDraw 3D drawing will not function as per the orientation mode selected 90 180 270 e g 3D games DOS based applications in Full Screen Mode will not function as per the orientation mode selected 90 180 270 Dual is not supported in Windows 98 ME NT 4 0 MagicRotation does not provide support for 24 bits per pixel Bit depth Color Qu
37. ating to Samsung products please contact the SAMSUNG customer care center North America U S A 1 800 SAMSUNG 7267864 http www samsung com CANADA 1 800 SAMSUNG 7267864 http www samsung com ca MEXICO 01 800 SAMSUNG 7267864 http www samsung com mx Latin America ARGENTINE 0800 333 3733 http www samsung com ar BRAZIL 4004 0000 http www samsung com br CHILE 800 726 7864 SAMSUNG http www samsung com cl COLOMBIA 01 8000112112 http www samsung com co COSTA RICA 0 800 507 7267 http www samsung com latin ECUADOR 1 800 10 7267 http www samsung com latin EL SALVADOR 800 6225 http www samsung com latin GUATEMALA 1 800 299 0013 http www samsung com latin JAMAICA 1 800 234 7267 http www samsung com latin PANAMA 800 7267 http www samsung com latin PUERTO RICO 1 800 682 3180 http www samsung com latin REP DOMINICA 1 800 751 2676 http www samsung com latin TRINIDAD amp TOBAGO 1 800 7267 864 http www samsung com latin VENEZUELA 0 800 100 5303 http www samsung com latin Europe BELGIUM CZECH REPUBLIC DENMARK FINLAND FRANCE GERMANY HUNGARY ITALIA LUXEMBURG NETHERLANDS NORWAY POLAND PORTUGAL REPUBLIC OF IRELAND SLOVAKIA SPAIN SWEDEN SWITZERLAND U K ESTONIA LATVIA LITHUANIA KAZAKHSTAN RUSSIA UKRAINE UZBEKISTAN AUSTRALIA CHINA HONG KONG INDIA INDONESIA JAPAN MALAYSIA 02 201 2418 844 000 844 Distributor pro Ceskou republiku http www samsung com be http www
38. ce method while showing odd lines and then even lines in turn is called the Interlace method The Non Interlace method is used for the majority of monitors to ensure a clear image The Interlace method is the same as that used in TVs Plug amp Play This is a function that provides the best quality screen for the user by allowing the computer and the monitor to exchange information automatically This monitor follows the international standard VESA DDC for the Plug amp Play function Resolution The number of horizontal and vertical dots used to compose the screen image is called resolution This number shows the accuracy of the display High resolution is good for performing multiple tasks as more image information can be shown on the screen Example If the resolution is 1280 x 1024 this means the screen is composed of 1280 horizontal dots horizontal resolution and 1024 vertical lines vertical resolution Contact SAMSUNG WORLDWIDE Terms For Better Display Authority Correct Disposal o For Better Display 1 Adjust computer resolution and screen injection rate refresh rate oncomputer as described below to enjoy the best quality of picture You can have an uneven quality of picture in the screen if the best quality of picture is not provided in TFT LCD o Resolution 1280 x 1024 o Vertical frequency refresh rate 60 Hz 2 TFT LCD panel manufactured by using advanced semiconductor technology with precision of 1pp
39. check bem kios you ko ale day moda Fat Ha al Continue meat cannot dapi cinei y Thee imiy lead 69 an usable apa alio gamed hor ghar p This monitor driver is under certifying MS logo and this installation doesn t Pani damage your system The certified driver will be posted on Samsung Monitor homepage http www samsung com rar NG ee rete Dia typo Hiiri ed E ET Seated mier aial Laranor an ADA Gece KONO LE iieri Gorges Geaa in a z p ri nee sin To waaa daimiu ghoul Sha ceiver flies To updater hag graer mee How hn danica Ea drvca eh ofa eat Bhp Spr roll BEOR NG a pemu maa Ces inaina fe gated ai j Tauningal Fa diar Abaca 7 Check the Browse my computer for driver software checkbox and click Let me pick from a list of device drivers on my computer Hagar O AU A MCA ka Gere paan Tamh m chow aala Ba i id Search sutomatiially tee epdated driver pitani area AN a mial Bn Feras Pees Ber Lebel feeds iat Paa ae eee LF petal naina La man pick trom a lint of device Grivert on niy Computer ra Bi al an ra dere ka paa a kar sere aril all deer kaaa r jbr ipnr gery ee re 8 Click Have Disk and select the folder for example D Drive where the driver setup file is located and click OK Splet the divans direst buan ln bal Pee thig hanan Pa mar ieee ra Hala ch rin sa wa grr ngaa Pipa Eara ilan Pol lean Pa a piy i ia ree Ze Sika Hina 9
40. cting the Monitor Using the Stand Installing the Monitor Driver Installing the Monitor Driver Natural Color Automatic Manual Natural Color Natural Color Natural Color Pro color management system Monitor Color Cal amp Profiling Preference Copyrightic 2003 Samsung Electranics Ca Ltd One of the recent problems in using a computer is that the color of the images printed out by a printer or other images scanned by a scanner or a digital camera are not the same as those shown on the monitor The Natural Color S W is the very solution for this problem It is a color administration system developed by Samsung Electronics in association with Korea Electronics amp Telecommunications Research Institute ETRI This is only available for Samsung monitors and ensures that the color of the images on the monitor are the same as the printed or scanned images For more information refer to Help F1 in the software program Installing the Natural Color Software Insert the CD included with the Samsung monitor into the CD ROM Drive The initial Natural Color screen will appear Click on Natural Color in the startup window to install the Natural Color software To install the program manually insert the CD included with the Samsung monitor into the CD ROM Drive click the Windows Start button select Run Enter D color NCProsetup exe and then press the lt Enter gt key If the drive where the CD is i
41. dows XP Operating System Hardware Installation The software pou ane mabaling foo this hardware Samsung aoe has not passed Windows Logo besting to werily its compatiblity wath windows XP Te thes besing is imputar Continuing your installation of this software may impair or destabilize the conect operation of your system ether immediately of in the future Mictozoall strongly recommends that you stop this installation now and contact the hardware vendor for software that has passed Windows Logo testing This monitor driver is under certifying MS logo and this installation don t damage your system The certified driver will be posted on Samsung Monitor homepage http www samsung com 5 Monitor driver installation is completed Connecting the Monitor Using the Stand Installing the Monitor Driver Installing the Monitor Driver Natural Color Automatic Manual Installing the Monitor Driver Manual Windows Vista Windows XP Windows 2000 Windows ME Windows NT Linux CO When prompted by the operating system for the monitor driver insert the CD ROM Pa included with this monitor Driver installation is slightly different from one operating system to another Follow the directions appropriate for the operating system you have Prepare a blank disk and download the driver program file at the Internet web site shown below e Internet web site http www samsung com Worldwide http www samsung
42. e Stand Installing the Monitor Driver Installing the Monitor Driver Natural Color Automatic Manual Using the Stand 2 HAS Stand A Stand Stopper Attaching a Base This monitor accepts a 100 mm x 100 mm VESA compliant mounting interface pad EL DAE DA HAS Stand Monitor Mounting interface pad Sold separately Turn off your monitor and unplug its power cord 2 Lay the LCD monitor face down on a flat surface with a cushion beneath it to protect the screen 3 Remove screws and then remove the stand from the LCD monitor 4 Align the mounting interface pad with the holes in the rear cover mounting Pad and secure it with four screws that came with the arm type base wall mount hanger or other base A e Do not use screws longer than the standard dimension as they may damage the inside of the Monitor e For wall mounts that do not comply with VESA standard screw specifications the length of the screws may differ depending on their specifications e Do not use screws that do not comply with the VESA standard screw specifications Do not fasten the screws too tightly as this may damage the product or cause the product to fall leading to personal injury Samsung is not liable for these kinds of accidents e Samsung is not liable for product damage or personal injury when a non VESA or non specified wall mount is used or the consumer fails to follow the product installation instructions
43. e model and the product specifica tions are subject to change without prior notice for reasons of performance enhancement E Troubleshooting Specifications E Information MENU 1 usnu Opens the on screen menu and exits from the menu or closes the adjustment menu 2 Wis These buttons allow you to adjust items in the menu 3 Press this button to activate a highlighted menu item 4 AUTO Press to self adjust the incoming PC signal automatically The values of fine coarse and position are adjusted automatically User Control Buttons Direct Functions OSD Functions setae MagicTune OD MagicRotation AUTO MENU Description When the AUTO button is pressed the Auto Adjustment screen appears as shown in the animated screen on the center Auto adjustment allows the monitor to self adjust to the incoming video signal The values of fine coarse and position are adjusted automatically Available in analog mode only To make the automatic adjustment function sharper execute the AUTO function while the AUTO PATTERN is on If auto adjustment does not work properly press AUTO button again to adjust picture with more accuracy If you change resolution in the control panel auto function will be executed automatically OSD Lock amp Unlock When pressing the AUTO button after locking the OSD Maan ae phe wa Pg Ta oe a re te Pn na Bria iA P Ca s Tr O a O T s a ba Te 3 T o
44. e only Applicable in the European Union and other European countries with separate collection systems This marking shown on the product or its literature indicates that it should not be disposed with other household wastes at the end of its working life To prevent possible harm to the environment or human health from uncontrolled waste disposal please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources Household users should contact either the retailer where they purchased this product or their local government office for details of where and how they can take this item for environmentally safe recycling Business users should contact their supplier and check the terms and conditions of the purchase contract This product should not be mixed with other commercial wastes for disposal
45. e the MagicZone horizontally V Position This function is to move the MagicZone vertically H Size This function is to adjust the horizontal size of the MagicZone V Size This function is to adjust the vertical size of the MagicZone The tone of the color can be changed and one of four modes can be selected Cool Normal Warm and Custom Not available in MagicColor mode of Full and Intelligent Adjusts individual R G B color balance Not available in MagicColor mode of Full and Intelligent Gamma correction changes the luminance of the colors with intermediate luminance e Mode 1 e Mode 2 e Mode 3 QQ MagicZone Hue Saturation Brightness Sharpness H Position V Position H Size V Size QQ QQ QQ Coarse Sharpness H Position V Position osD Description Removes noise such as vertical stripes Coarse adjustment may move the screen image area You may relocate it to the center using the horizontal control menu Available in analog mode only Removes noise such as horizontal stripes If the noise persists even after fine tuning repeat it after adjusting the frequency clock speed Available in analog mode only Changes the clearance of image Not available in MagicColor mode of Full and Intelligent Changes the horizontal position of the monitor s entire display Available in analog mode only Changes the vertical position of the monitor s entire disp
46. e the Q Q brightness according to personal preference You can use the on screen menus to change the contrast Contrast according to personal preference Q Q Not available in MagicColor mode of Full and Intelligent Color Menu Description Play Stop MagicColor Color Tone Color Control Gamma Image MagicColor is a new technology that Samsung has exclusively developed to improve digital image and to display natural color more clearly without disturbing image quality 1 Off Returns to the original mode 2 Demo The screen before applying MagicColor appears on the right and the screen after applying MagicColor appears on the left 3 Full Displays not only vivid natural color but also more realistic natural skin color with clearness 4 Intelligent Displays vivid natural color with clearness 5 MagicZone The MagicZone ensures the clear and sharp display of animated multimedia or photo images by enhancing the brightness sharpness saturation hue of a certain area on the screen Especially MagicZone is appropriate to using the moving picture Hue This function is to adjust the hue of the MagicZone Saturation This function is to adjust the saturation of the MagicZone Brightness This function is to adjust the brightness of the MagicZone Sharpness This function is to adjust the sharpness of the MagicZone H Position This function is to move the Ma
47. een is not normal change to a different mode lower mode of resolution colors or frequency CO If there is no Mode at All Display Modes select the level of resolution and vertical YM frequency by referring to the Preset Timing Modes in the user guide 2 Linux Operating System To execute X Window you need to make the X86Config file which is a type of system setting file Press Enter at the first and the second screen after executing the X86Config file The third screen is for setting your mouse Set a mouse for your computer The next screen is for selecting a keyboard Set a Keyboard for your computer The next screen is for setting your monitor First of all set a horizontal frequency for your monitor You can enter the frequency directly Set a vertical frequency for your monitor You can enter the frequency directly Enter the model name of your monitor This information will not affect the actual execution of X Window 10 You have finished setting up your monitor Execute X Window after setting other requested hardware Hp o NG LG o po Connecting the Monitor Using the Stand Installing the Monitor Driver Installing the Monitor Driver Natural Color Automatic Manual Natural Color Natural Color Natural Color Pro color management system Monitor Color Cal amp Profiling Preference Copyrightic 2003 Samsung Electranics Ca Ltd One of the recent problems in using a compu
48. en when the monitor is connected properly check to see if the monitor status is set to analog Press button to have the monitor double check the input signal source If the initial screen the login screen appears boot the computer in the applicable mode the safe mode for Windows ME XP 2000 and then change the frequency of the video card Refer to the Preset Timing Modes Note If the initial screen the login screen does not appear contact the Service Center or your dealer You can see this message when the signal from the video card exceeds the maximum resolution and frequency that the monitor can handle properly Adjust the maximum resolution and frequency that the monitor can handle properly If the display exceeds SXGA or 75 cannot see the On Screen Display The screen shows strange colors or just black and white The screen suddenly has become unbalanced The screen is out of focus or OSD cannot be adjusted LED is blinking but no images on the screen There is no image on the screen Is the power indicator on the monitor blinking at 1 second intervals Connected using the DVI cable Have you locked the On Screen Display OSD Menu to prevent changes Is the screen displaying only one color as if looking at the screen through a cellophane paper Have the screen colors become strange after running a program or due to a crash between applications Has the video card
49. ensaver to a changing picture when away from the monitor for an extended period of time 2 Adjust the resolution and frequency to the level appropriate for the model e An inappropriate resolution may cause undesirable picture quality 19 inch 48 cm 1280 X 1024 2 Viewing the monitor continuously at a too close angle may result in damage to your eyesight To ease eye strain take at least a five minute break after every hour of using the monitor Do not install the product on an unstable uneven surface or a location ko prone to vibrations bi e Dropping the product may cause damage to the product or the person carrying it Using the product in a location prone to vibrations may shorten the lifetime of the product or may cause the product to catch fire When moving the monitor turn off and unplug the power cord Make sure that all cables including the antenna cable and cables a connected to other devices are disconnected before moving the NUT E monitor al U h LI I e Failure to disconnect cables may damage it and cause fire or electric shock Place the product out of children s reach as they could damage by hanging onto it O e A falling product may cause injury to the person or even fatality f po F en A E 2 When not using the product for an extended period of time keep the product unplugged e Otherwise this may cause heat emission from
50. f the monitor and the computer systems will provide the best operating conditions and monitor settings In most cases the monitor installation will proceed automatically unless the user wishes to select alternate settings Dot Acceptable TFT LCD panels manufactured by using advanced semiconductor technology with precision of 1ppm one millionth above are used for this product But the pixels of RED GREEN BLUE and WHITE color appear to be bright sometimes or some black pixels may be seen This is not from bad quality and you can use it without any problelms e For example the number of TFT LCD sub pixels contained in this product are 3 932 160 Note Design and specifications are subject to change without prior notice Class B Equipment Information Communication equipment for residential use This product complies with the Electromagnetic Compatibility Directives for residential use and can be used in all areas including common residential areas Class B equipment emits less electromagnetic waves than Class A equipment General PowerSaver Preset Timing Modes o PowerSaver This monitor has a built in power management system called PowerSaver This system saves energy by switching your monitor to low power mode when it has not been used for a certain amount of time The monitor automatically returns to normal operation when you press a key on the keyboard For energy conservation turn your monitor OFF when it is not needed or whe
51. gicZone horizontally V Position This function is to move the MagicZone vertically H Size This function is to adjust the horizontal size of the MagicZone V Size This function is to adjust the vertical size of the MagicZone The tone of the color can be changed and one of four modes can be selected Cool Normal Warm and Custom Not available in MagicColor mode of Full and Intelligent Adjusts individual R G B color balance Not available in MagicColor mode of Full and Intelligent Gamma correction changes the luminance of the colors with intermediate luminance e Mode 1 e Mode 2 e Mode 3 QQ MagicZone Hue Saturation Brightness Sharpness H Position V Position H Size V Size QQ QQ QQ Coarse Sharpness H Position V Position osD Description Removes noise such as vertical stripes Coarse adjustment may move the screen image area You may relocate it to the center using the horizontal control menu Available in analog mode only Removes noise such as horizontal stripes If the noise persists even after fine tuning repeat it after adjusting the frequency clock speed Available in analog mode only Changes the clearance of image Not available in MagicColor mode of Full and Intelligent Changes the horizontal position of the monitor s entire display Available in analog mode only Changes the vertical position of the monitor s entire display A
52. h val choose the drive bo rata Choose this cp bon fo sieni the deae dre homa ki Wirde doss ment queens that She dte pow choco val ba iha bast makah for you hace GF Thai herent ni Agay gna Tail ma wher de maning in impake 7 Click the Browse button then choose A D Driver and choose your monitor model in the model list and click the Next button install From Disk Hardware Update Wizard Selec the dewee diei you want lo malal ka hii hide Inget the mamulachurei s metallabon dak and then make sure thal the conect dime is selected below z Seles the mamukhaan ar modal of our herders drao ad an cle Het IP pees hana a dik hal Ganang ho ibi aa ara ba iba ekek Haa Dok Made Samsung sasa Copy manufacturer s hes thom x ih Thi ceiver in mot digitally signadi Talia rie dia manna imba 8 If you can see following Message window then click the Continue Anyway button Then click OK button Hardware Installation The software pou ane installing for this hardware Samsung saa has not passed Windows Logo besting lo wendy its compabbdiy ih ino RP Doll ma veky Ihis bagting it riper Continuing pour installation of this oftware may impair or destabilize the conect operdion of your system either immediately of m the future Microsoft strongly recommends thal gow Hop hit installation now and contact the hardware vendo for software that haz passed Windows Loge testing STOP instalation This monitor
53. he monitor 1 if there are any sub woofer speakers near the monitor unplug and relocate the woofer to another room 2 Remove all electronic devices such as radios fans clocks and telephones that are within 3 feet one meter of the monitor Useful Tips e A monitor recreates visual signals received from the computer Therefore if there is trouble with the computer or the video card this can cause the monitor to become blank have poor coloring noise Video mode not supported etc In this case first check the source of the problem and then contact the Service Center or your dealer e Judging the monitor s working condition If there is no image on the screen or a Not Optimum Mode Recommended Mode 1280 x 1024 60 Hz message comes up disconnect the cable from the computer while the monitor is still powered on o If there is a message coming up on the screen or if the screen goes white this means the monitor is in working condition o In this case check the computer for trouble E Safety Instructions o Check List SyncMaster 940T The color and appearance of the product may vary depending on the model and the product specifica tions are subject to change without prior notice for E Introduction reasons of performance enhancement E Setup E Adjusting Your Monitor UG Specifications E Information Self Test Feature Check Check List Q amp A CO Before calling for assistance
54. heck the compatible graphic card list provided http www samsung com monitor magictune Download the latest program The program can be downloaded http www samsung com monitor magictune Reboot the computer after installing the program for the first time If a copy of the program is already installed remove it reboot the computer and then install the program again You need to reboot the computer for it to operate normally after installing or removing the program Visit the MagicTune website and download the installation software for MagicTune Check the following items if there is trouble with the monitor NI Check if the power cord and the video cables are properly connected to the computer Check if the computer beeps more than 3 times when booting If it does request an a service for the main board of the computer 3 If you installed a new video card or if you assembled the PC check if the installed the adapter video driver and the monitor driver 4 Check if the scanning ratio of the video screen is set at 56 Hz 75 Hz Do not exceed 75 Hz when using the maximum resolution 5 If you have problems in installing the adapter video driver boot the computer in Safe Mode remove the Display Adapter at the Control Panel System Device Administrator and then reboot the computer to reinstall the adapter video driver Fa A If problems repeatedly occur contact an authorized service center Check L
55. ill no image press the button Then press any key on the keyboard again to activate the monitor and restore the image on the screen You may get a blank screen if you boot the system before you connect the DVI cable or disconnect and then reconnect the DVI cable while the system is running as certain types of graphic cards do not send out video signals Connect the DVI cable and then reboot the system Unlock the OSD by pressing the MENU button for at least 5 seconds Check the signal cable connection Make sure the video card is fully inserted in it s slot Reboot the computer Set the video card by referring to the video card manual Adjust screen image position and size using the OSD Adjust the resolution and frequency at the video card Refer to the Preset Timing Modes The screen can be unbalanced due to the cycle of the video card signals Readjust Position by referring to the OSD Have you adjusted the resolution or frequency on the monitor Is the frequency properly adjusted when checking the Display Timing on the menu Adjust the resolution and frequency of the video card Refer to the Preset Timing Modes Adjust the frequency properly by referring to the video card manual and the Preset Timing Modes There are only 16 colors shown on the screen The screen colors have changed after changing the video card There is a message that reads Unrecognized monitor Plug amp
56. installation Language Click Next When the Installation Shield Wizard window appears click Next Select I agree to the terms of the license agreement to accept the terms of use Choose a folder to install the MagicTune program Click Install The Installation Status window appears Click Finish When the installation is complete the MagicTune executable icon appears on your desktop Double click the icon to start the program Hi MagicTune execution icon may not appear depending on specification of computer system or monitor If that happens press F5 Key if Ture P Se EE PEREREDELEPEEDEDENEDELEPEE EHE S PSSST SSS SSS PSSST SPSS ESET eS eS SFP CS SSPE STS SSS SPSS SPS SPSS SPSS SSS PSPS SSS EPSPS SSeS LS ee Installation Problems The installation of MagicTune can be affected by such factors as the video card motherboard and the network environment D System Requirements OS Windows 2000 Windows XP Home Edition Windows XP Professional Windows Vista SEELEEETEETETEETREEETETEETETETEEE EE LENTEN NTEN EE NEE EE AE EAT AA AA ES HAHAHAH Pa It is recommended using MagicTune in Windows 2000 or A later PEPE LOLOL ELEC rere TATAE AAKALA LI K TETE NA KALI LAATA TINA AA Hardware 32 MB Memory above 60 MB Hard disk space above For more information visit the MagicTune website Uninstall The MagicTune program can be removed only by using the Add or Remove Programs op
57. ist Q amp A Self Test Feature Check Q amp A Question Answer How can I change the The frequency can be changed by reconfiguring the video card frequency Note that video card support can vary depending on the version of the driver used Refer to the computer or the video card manual for details How can adjust the resolution Windows ME XP 2000 Set the resolution at the Control Panel Display Settings Contact the video card manufacturer for details How can set the Power Saving Windows ME XP 2000 Set the function at BIOS SETUP of the function computer or the screen saver Refer to Windows Computer Manual How can clean the outer Disconnect the power cord and then clean the monitor with a soft case LCD Panel cloth using either a cleaning solution or plain water Do not leave any detergent or scratches on the case Do not let any water enter the monitor Check List Q amp A Self Test Feature Check 6 Self Test Feature Check Self Test Feature Check Warning Messages Environment Useful Tips Your monitor provides a self test feature that allows you to check whether your monitor is functioning properly O Self Test Feature Check 1 Turn off both your computer and the monitor 2 Unplug the video cable from the back of the computer 3 Turn on the monitor If the monitor is functioning properly you will see a box in the illustration below Check Signal Cable This box appears during no
58. k Start Settings Control Panel and then double click Display icon 2 In Display Registration Information window click Settings Tab and then click All Display Modes 3 Select a mode that you wish to use Resolution Number of colors and Vertical frequency and then click OK 4 Click Apply button if you see the screen working normally after clicking Test If the screen is not normal change to a different mode lower mode of resolution colors or frequency CO If there is no Mode at All Display Modes select the level of resolution and vertical YM frequency by referring to the Preset Timing Modes in the user guide 2 Linux Operating System To execute X Window you need to make the X86Config file which is a type of system setting file Press Enter at the first and the second screen after executing the X86Config file The third screen is for setting your mouse Set a mouse for your computer The next screen is for selecting a keyboard Set a Keyboard for your computer The next screen is for setting your monitor First of all set a horizontal frequency for your monitor You can enter the frequency directly Set a vertical frequency for your monitor You can enter the frequency directly Enter the model name of your monitor This information will not affect the actual execution of X Window 10 You have finished setting up your monitor Execute X Window after setting other requested hardware Hp o NG LG o po Conne
59. lay Available in analog mode only Play Stop 29 29 29 29 29 Language H Position V Position Transparency Display Time O Setup M MENU Description Play Stop You can choose one of eight languages English Deutsch Espa ol Fran ais Italiano Svenska PyYCCKHH Portugu s 29 Note The language chosen affects only the language of the OSD It has no effect on any software running on the computer You can change the horizontal position where the OSD Q Q menu appears on your monitor MB You can change the vertical position where the OSD menu appears on your monitor Change the transparency of the background of the OSD Q Q The menu will be automatically turned off if no adjustments are made for a certain time period You can set the amount of time the menu will wait before it is turned off ia i a CAP AG yaa a ie 8 Pi Menu Description Play Stop Auto Source Select Auto Source for the monitor to automatically select Q Q the signal source Image Reset Image parameters are replaced with the factory default Q Q values Color parameters are replaced with the factory default Q Q Color Reset ea Information Menu Description Information Shows a video source display mode on the OSD screen 10 MagicTune HELP S Installation Insert the installation CD into the CD ROM drive Click the MagicTune installation file Select
60. m one millionth above is used for this product But the pixels of RED GREEN BLUE and WHITE color seem to be bright sometimes or some of black pixels could be seen This is not from bad quality and you can use it without uneasiness o For example the number of TFT LCD sub pixels that is contained in this product are 3 932 160 3 When you clean the monitor and the panel outside please apply the recommended small amount of cleaner by using soft and dry cloth and polish it Let LCD area not to be forced but to be scrubbed out softly If excessive force is applied you can have a stain on it 4 lf you are not satisfied with the quality of the picture you can get better quality of the picture by executing auto adjustment function in display screen that is appeared as window termination button is pressed If there s still noise after automatic adjustment use FINE COARSE adjustment function 5 If you view a fixed screen for an extended period of time residual image or blurriness may appear Change the mode to energy save or set a screensaver to move the picture when you need to be away from the monitor for an extended period of time Contact SAMSUNG WORLDWIDE Terms For Better Display Authority Correct Disposal Authority Information in this document is subject to change without notice 2007 Samsung Electronics Co Ltd All rights reserved Reproduction in any manner whatsoever without the written permission of Sams
61. n leaving it unattended for long periods The PowerSaver system operates with a VESA DPMS compliant video card installed in your computer Use the software utility installed on your computer to set up this feature Power off EPA ENERGY 2000 State Normal Operation Power saving mode Power Indicator Blue Blue Blinking off Less than Less than Less than Power Consumption 38 Watts 1 Watts 1 Watts This monitor is EPA ENERGY STAR compliant and ENERGY2000 compliant when used with a computer equipped with VESA DPMS functionality As an ENERGY STAR Partner SAMSUNG has determined that this ENERGY STAR product meets the ENERGY STAR guidelines for energy efficiency General PowerSaver Preset Timing Modes Preset Timing Modes If the signal transferred from the computer is the same as the following Preset Timing Modes the screen will be adjusted automatically However if the signal differs the screen may go blank while the power LED is on Refer to the video card manual and adjust the screen as follows Table 1 Preset Timing Modes Horizontal Vertical Frequency Pixel Clock Sync Polarity Display Mode Frequency IBM 640 x 350 IBM 640 x 480 IBM 720 x 400 MAC 640 x 480 MAC 832 x 624 MAC 1152 x 870 VESA 640 x 480 VESA 640 x 480 VESA 800 x 600 VESA 800 x 600 VESA 800 x 600 VESA 800 x 600 VESA 1024 x 768 VESA 1024 x 768 VESA 1024 x 768 VESA 1152 x 864 VESA 1280 x 1024 VESA 1280 x 1024
62. n then follow next steps continually Click Driver and then click on Update Driver then click on the Next button Choose Display a list of the known drivers for this device so that can choose a specific driver then click Next and then click Have disk Click the Browse button then choose A D Driver Click the Open button then click OK button Choose your monitor model and click the Next button then click Next button Click the Finish button then the Close button If you can see the Digital Signature Not Found window then click the Yes button And click the Finish button then the Close button Microsoft Windows Millennium Operating System ALO D MISON ma ma Click Start Setting Control Panel Double click Display icon Select the Settings tab and click Advanced Properties button Select the Monitor tab Click the Change button in the Monitor Type area Choose Specify the location of the driver Choose Display a list of all the driver in a specific location then click Next button Click the Have Disk button Specify A D driver then click OK button Select Show all devices and choose the monitor that corresponds to the one you connected to your computer and click OK Continue choosing Close button and OK button until you close the Display Properties dialogue box Microsoft Windows NT Operating System KHAN Clic
63. nsert the CD ROM Pa included with this monitor Driver installation is slightly different from one operating system to another Follow the directions appropriate for the operating system you have Prepare a blank disk and download the driver program file at the Internet web site shown below e Internet web site http www samsung com Worldwide http www samsung com monitor U S A http www sec co kr monitor Korea http www samsungmonitor com cn China Microsoft Windows Vista Operating System 1 Insert your Manual CD into your CD ROM drive 2 Click J Start and Control Panel Then double click on Appearance and Personalization am g EE ps pon NG a ns 3 Click Personalization and then Display Settings bm ie ee ai lamya aa tS ee BEN a ee oe eee ee er ee ese pee Pa ima saran ay ee a Tas NG bye p pime a apa ee ee G pa km ki m gt iian ii a ag ap L muger ar ee ee e ee a im pa ee ee ee ee R T ba er ma mem eer ee oe 4 Click Advanced Settings L ltp Meriter ba PENA Gohirio big LE Hierin Corp to Color Hh aghast GAP bat 5 Click Properties in the Monitor tab If the Properties button is deactivated it means the configuration for your monitor is completed The monitor can be used as is If the message Windows needs is displayed as shown in the figure below BO Hat a peje eh a a ALA ay Gearing Bin
64. nserted is not D enter the applicable drive Uninstalling the Natural Color Software Program Select Setting Control Panel on the Start menu and then double click Add Delete a program Select Natural Color from the list and then click the Add Delete button SyncMaster 940T The color and appearance of the product may wary depending on the model and the product specifica tions are subject to change without prior notice for reasons of performance enhancement E Specifications E Information Connecting the Monitor Using the Stand Installing the Monitor Driver Installing the Monitor Driver Natural Color Automatic Manual 6 Connecting the Monitor Rear of Computer Rear of Monitor New Model Macintosh Connect the power cord for your monitor to the power port on the back of the monitor Plug the power cord for the monitor into a nearby outlet Use appropriate connection for your computer Using the D sub Analog connector on the video card Connect the signal cable to the 15 pin D sub port on the back of your monitor Using the DVI Digital connector on the video card Connect the DVI Cable to the DVI IN port on the back of your monitor 8 Connected to a Macintosh Connect the monitor to the Macintosh computer using the D sub connection cable O If the monitor and the computer are connected you can turn them on and use them K Connecting the Monitor Using th
65. ock or fire 2 Do not try to move the monitor by pulling only the wire or the signal cable e This may cause a breakdown electric shock or fire due to damage to the cable 2 Do not move the monitor right or left by pulling only the wire or the signal cable e This may cause a breakdown electric shock or fire due to damage to the cable Do not cover the vents on the monitor cabinet e Bad ventilation may cause a breakdown or fire 2 Do not place water containers chemical products or small metal objects on the monitor e This may cause a malfunction electric shock or fire e f a foreign substance enters the monitor unplug the power cord and contact the Service Center 2 Keep the product away from combustible chemical sprays or inflammable substances e This may cause an explosion or fire J 2 Never insert anything metallic into the monitor openings HE e This may cause electric shock fire or injury 2 Do not insert metal objects such as chopsticks wire and tools or inflammable objects such as paper or matches into the vent headphone port or AV ports or etc e This may cause electric shock or fire If an alien substances or water enters the product turn the product off unplug the power connector from the wall outlet and contact the Service Center 9 When viewing a fixed screen for an extended period of time residual image or blurriness may appear e Change the mode to energy saving mode or set a scre
66. of the display Thus the previous image is retained when switching to a new video image All display products including LCD are subject to image retention This is not a product defect Please follow the suggestions below to protect your LCD from image retention Power Off Screen Saver or Power Save Mode Ex e Turn the power off when using a stationary pattern Turn the power off for 4 hours after 20 hours in use Turn the power off for 2 hours after 12 hours in use e Use a Screen saver if possible Screen saver in one color or a moving image is recommended e Set the Monitor to power off with the PC Display Properties Power Scheme Suggestions for specific applications Ex Airports Transit Stations Stock Markets Banks and Controlling Systems We recommend that you follow set up of your display system program as below Display Information together with Logo or Moving image cycle Ex Cycle Display Information for 1 hour followed by a Display Logo or moving image for 1 minute Change the Color Information periodically Use 2 different colors Ex Rotate the Color Information with 2 colors every 30 minutes Type 1 Type 1 FLGHT TIME OZ348 20 30 FLGHT TIME Bel 20 30 UA102 21 10 lt UA102 21 10 Avoid using a combination of characters and background color with large difference in luminance Avoid using Grey colors which can cause Image retention easily e Avoid Colors with big difference
67. om Disk Hardware Update Wizard Selec the dewee diei you want lo malal ka hii hide Inget the mamulachurei s metallabon dak and then make sure thal the conect dime is selected below z Seles the mamukhaan ar modal of our herders drao ad an cle Het IP pees hana a dik hal Ganang ho ibi aa ara ba iba ekek Haa Dok Made Samsung sasa Copy manufacturer s hes thom x ih Thi ceiver in mot digitally signadi Talia rie dia manna imba 8 If you can see following Message window then click the Continue Anyway button Then click OK button Hardware Installation The software pou ane installing for this hardware Samsung saa has not passed Windows Logo besting lo wendy its compabbdiy ih ino RP Doll ma veky Ihis bagting it riper Continuing pour installation of this oftware may impair or destabilize the conect operdion of your system either immediately of m the future Microsoft strongly recommends thal gow Hop hit installation now and contact the hardware vendo for software that haz passed Windows Loge testing STOP instalation This monitor driver is under certified MS logo and this installation doesn t damage your system The certified driver will be posted on Samsung Monitor homepage http www samsung com 9 Click the Close button then click OK button continually 10 Hardyearo Update Wizard Completing the Hardware Update Wizard The vated kant feted rth the oeri koi Earisung saan ni
68. on of inputted visual signal and adjust to create optimum contrast gt gt Click here to see an animation clip Brightness button When OSD is not on the screen push the button to adjust E brightness Adjust buttons w a Adjust items in the menu CH Enter button Activates a highlighted menu item Source button Push the then selects the video signal while the OSD is off When the source button is pressed to change the input mode a message appears in the upper left of the screen displaying the current mode analog or digital input signal Note If you select the digital mode you must connect your monitor to the graphic card s DVI port using the DVI cable 5 AUTO button Use this button for auto adjustment O Power button Use this button for turn the monitor on and off Power indicator This light glows blue during normal operation and blinking blue once as the monitor saves your adjustments LY See PowerSaver described in the manual for further information regarding power saving 1 functions For energy conservation turn your monitor OFF when it is not needed or when leaving it unattended for long periods Unpacking Front Rear Rear SLMEUAG a f HAS Stand The configuration at the back of the monitor may vary from product to product YD POWER port Connect the power cord for your monitor to the power port on the back of the monitor P2 DVI IN port Connect the DVI Cable to the DVI port on
69. onitor face down e This may damage the TFT LCD surface The installation of the bracket must be done by a qualified professional 2 Installing a wall bracket must be done by a qualified professional e Installing the bracket by unqualified personnel may result in injury e Always use the mounting device specified in the owner s manual 2 When installing the product make sure to keep it away from the wall more than 10 cm 4 inches for ventilation purposes e Poor ventilation may cause an increase in the internal temperature of the product resulting in a shortened component life and degraded performance Keep the plastic packaging bag out of children s reach e The plastic packaging bag may cause suffocation if children play with it Notational Power Installation Clean Others Clean When cleaning the monitor case or the surface of the TFT LCD screen wipe with a slightly moistened soft fabric 2 Do not spray water or detergent directly onto the monitor e This may cause damage electric shock or fire 2 Use the recommended detergent with a smooth cloth 2 If the connector between the plug and the pin is dusty or dirty clean it properly using a dry cloth e A dirty connector may cause electric shock or fire Make sure to unplug the power cord before cleaning the product e Otherwise this may cause electric shock or fire 2 Unplug the power cord from the power outlet and wipe the product using a
70. oting If it does request an a service for the main board of the computer 3 If you installed a new video card or if you assembled the PC check if the installed the adapter video driver and the monitor driver 4 Check if the scanning ratio of the video screen is set at 56 Hz 75 Hz Do not exceed 75 Hz when using the maximum resolution 5 If you have problems in installing the adapter video driver boot the computer in Safe Mode remove the Display Adapter at the Control Panel System Device Administrator and then reboot the computer to reinstall the adapter video driver Fa A If problems repeatedly occur contact an authorized service center Check List Q amp A Self Test Feature Check Q amp A Question Answer How can I change the The frequency can be changed by reconfiguring the video card frequency Note that video card support can vary depending on the version of the driver used Refer to the computer or the video card manual for details How can adjust the resolution Windows ME XP 2000 Set the resolution at the Control Panel Display Settings Contact the video card manufacturer for details How can set the Power Saving Windows ME XP 2000 Set the function at BIOS SETUP of the function computer or the screen saver Refer to Windows Computer Manual How can clean the outer Disconnect the power cord and then clean the monitor with a soft case LCD Panel cloth using either a cleaning
71. r ta Pi F i et y s nap a ip Description This is the function that locks the OSD in order to keep the current states of settings or prevent others from adjusting the current settings Lock Hold down the menu button for more than five seconds to activate the OSD adjustment lock function Unlock Hold down the menu button for more than five seconds to deactivate the OSD adjustment lock function Though the OSD adjustment lock function is activated you can still adjust the brightness and contrast and adjust MagicBright L using the Direct button MagicBright MENU Menu Description Push the MagicBright button to circle through available preconfigured pa NGA modes MagicBright _ Seven different modes Custom T ext Internet Game Sport Movie Dynamic Contrast Brightness Menu Description Brightness When OSD is not on the screen push the button to adjust brightness SOURCE MENMU Menu Description SOURCE Selects the video signal while the OSD is off User Control Buttons Direct Functions OSD Functions slice MagicTune DQ MagicRotation BI Picture Brightness MagioColor Color Contra I image coarse Fine Sharpness H Position V Position oso Language H Postion VPostion Transparency Display Time IM setup Auto Source mage Reset Color Resa OB Information O Picture F Menu Description Play Stop Brightness You can use the on screen menus
72. rmal operation if the video cable becomes disconnected or damaged 4 Turn off your monitor and reconnect the video cable then turn on both your computer and the monitor If your monitor screen remains blank after using the previous procedure check your video controller and computer system your monitor is functioning properly O Warning Messages If there is something wrong with the input signal a message appears on the screen or the screen goes blank although the power indicator LED is still on The message may indicate that the monitor is out of scan range or that you need to check the signal cable Not Optimum Mode Recommended Mode 1280 x 1024 60Hz Environment The location and the position of the monitor may influence the quality and other features of the monitor 1 if there are any sub woofer speakers near the monitor unplug and relocate the woofer to another room 2 Remove all electronic devices such as radios fans clocks and telephones that are within 3 feet one meter of the monitor Useful Tips e A monitor recreates visual signals received from the computer Therefore if there is trouble with the computer or the video card this can cause the monitor to become blank have poor coloring noise Video mode not supported etc In this case first check the source of the problem and then contact the Service Center or your dealer e Judging the monitor s working condition If there is no image on the screen
73. solution or plain water Do not leave any detergent or scratches on the case Do not let any water enter the monitor Check List Q amp A Self Test Feature Check 6 Self Test Feature Check Self Test Feature Check Warning Messages Environment Useful Tips Your monitor provides a self test feature that allows you to check whether your monitor is functioning properly O Self Test Feature Check 1 Turn off both your computer and the monitor 2 Unplug the video cable from the back of the computer 3 Turn on the monitor If the monitor is functioning properly you will see a box in the illustration below Check Signal Cable This box appears during normal operation if the video cable becomes disconnected or damaged 4 Turn off your monitor and reconnect the video cable then turn on both your computer and the monitor If your monitor screen remains blank after using the previous procedure check your video controller and computer system your monitor is functioning properly O Warning Messages If there is something wrong with the input signal a message appears on the screen or the screen goes blank although the power indicator LED is still on The message may indicate that the monitor is out of scan range or that you need to check the signal cable Not Optimum Mode Recommended Mode 1280 x 1024 60Hz Environment The location and the position of the monitor may influence the quality and other features of t
74. ter is that the color of the images printed out by a printer or other images scanned by a scanner or a digital camera are not the same as those shown on the monitor The Natural Color S W is the very solution for this problem It is a color administration system developed by Samsung Electronics in association with Korea Electronics amp Telecommunications Research Institute ETRI This is only available for Samsung monitors and ensures that the color of the images on the monitor are the same as the printed or scanned images For more information refer to Help F1 in the software program Installing the Natural Color Software Insert the CD included with the Samsung monitor into the CD ROM Drive The initial Natural Color screen will appear Click on Natural Color in the startup window to install the Natural Color software To install the program manually insert the CD included with the Samsung monitor into the CD ROM Drive click the Windows Start button select Run Enter D color NCProsetup exe and then press the lt Enter gt key If the drive where the CD is inserted is not D enter the applicable drive Uninstalling the Natural Color Software Program Select Setting Control Panel on the Start menu and then double click Add Delete a program Select Natural Color from the list and then click the Add Delete button SyncMaster 940Fn The color and appearance of the product may wary depending on the model and
75. the accumulated dirt or degraded insulation causing electric shock or fire 2 Do not place your children s favorite toys or any other objects of interest on the product e Children may try to climb on the product to retrieve an object The product could fall causing injury or even fatality When lifting up or moving the monitor do not lift the monitor upside down while holding only the stand e This may cause your monitor to fall and become damaged or cause personal injury Good Postures When Using the Monitor 2 Try to maintain a good posture when using the monitor Keep your back straight Keep a distance of about 45 50 cm between your eyes and the monitor screen Look at the screen from slightly above it and have the monitor directly in front of you e Tilt the monitor upwards by 10 20 degrees Adjust the monitor height so that the top of the monitor is slightly below eye level e Adjust the monitor angle so that there is no reflected light on the screen Try to maintain your arms perpendicular to your armpits Keep your arms level with the back of your hands Keep the angle of the elbow perpendicular Keep the angle of the knees at more than 90 degree Do not let your feet fall up from the floor Adjust the arm position so that it is below the heart SyncMaster 940Fn The color and appearance of the product may vary depending on the model and the product specifica tions are subject to ch
76. the back of your monitor 9 RGB IN port Connect the signal cable to the 15 pin D sub port on the back of your monitor O POWER on off Switch Use this button for turn the monitor on and off option O Kensington Lock The Kensington lock is a device used to physically fix the system to something when using it in a public place The locking device has to be purchased separately For using a locking device contact the place of purchase Fa rf See Connecting the Monitor for further information regarding cable connections SyncMaster 940Fn The color and appearance of the product may wary depending on the model and the product specifica tions are subject to change without prior notice for reasons of performance enhancement E Introduction E Adjusting Your Monitor Troubleshooting Specifications E Information E Safety Instructions Connecting the Monitor Using the Stand Installing the Monitor Driver Installing the Monitor Driver Natural Color Automatic Manual Connecting the Monitor Rear of Computer Rear of Monitor New Model Macintosh PAMAN Connect the power cord for your monitor to the power port on the back of the monitor Plug the power cord for the monitor into a nearby outlet Use appropriate connection for your computer Using the D sub Analog connector on the video card Connect the signal cable to the 15 pin DVI IN port on the back of your monitor
77. the product specifica tions are subject to change without prior notice for reasons of performance enhancement E Troubleshooting Specifications E Information MENU 1 usnu Opens the on screen menu and exits from the menu or closes the adjustment menu 2 Wis These buttons allow you to adjust items in the menu 3 Press this button to activate a highlighted menu item 4 AUTO Press to self adjust the incoming PC signal automatically The values of fine coarse and position are adjusted automatically User Control Buttons Direct Functions OSD Functions setae MagicTune OD MagicRotation AUTO MENU Description When the AUTO button is pressed the Auto Adjustment screen appears as shown in the animated screen on the center Auto adjustment allows the monitor to self adjust to the incoming video signal The values of fine coarse and position are adjusted automatically Available in analog mode only To make the automatic adjustment function sharper execute the AUTO function while the AUTO PATTERN is on If auto adjustment does not work properly press AUTO button again to adjust picture with more accuracy If you change resolution in the control panel auto function will be executed automatically OSD Lock amp Unlock When pressing the AUTO button after locking the OSD Maan ae phe wa Pg Ta oe a re te Pn na Bria iA P Ca s Tr O a O T s a ba Te 3 T or ta Pi F i
78. tion of the Windows Control Panel Perform the following steps remove MagicTune 1 Go to Task Tray Start Settings and select Control Panel in the menu If the program runs on Windows XP go to Control Panel in the Start menu 2 Click the Add or Remove Programs icon in Control Panel 3 Inthe Add or Remove Programs screen scroll down to find MagicTune Click on it to highlight it 4 Click the Change Remove button to remove the program Click Yes to begin the uninstall process 6 Wait until the Uninstall Complete dialog box appears gI Visit the MagicTune website for technical support for MagicTune FAQs questions and answers and software upgrades The MagicTuneT program is an additional program for monitor products Some computing systems that install either an older or the latest video driver are not compatible with MagicTungT Please visit the Magicline Website for technical support for Magictune Specifications subject to change without notice Magictune is a trademark of SAMSUNG ELECTRONICS CO Inc Windows is 4 registered trademark of Microsoft Corp Other trademarks are property of their respective holders DD MagicRotation Help O Installation PA gi ch 10 Insert the installation CD into the CD ROM drive Click the MagicRotation installation file Select installation Language Click Next When the InstallShield Wizard window appe
79. tions Do not fasten the screws too tightly as this may damage the product or cause the product to fall leading to personal injury Samsung is not liable for these kinds of accidents e Samsung is not liable for product damage or personal injury when a non VESA or non specified wall mount is used or the consumer fails to follow the product installation instructions To mount the monitor on a wall you should purchase the wall mounting kit that allows you to mount the monitor at least 10cm away from the wall surface Contact the nearest Samsung Service Center for more information Samsung Electronics will not be responsible for damages caused by using a base other than those specified e Please use Wall Mount according to the International standards gt Connecting the Monitor Using the Stand Installing the Monitor Driver Installing the Monitor Driver Natural Color Automatic Manual 9 Installing the Monitor Driver Automatic x When prompted by the operating system for the monitor driver insert the CD ROM NA included with this monitor Driver installation is slightly different from one operating system to another Follow the directions appropriate for the operating system you have Prepare a blank disk and download the driver program file at the Internet web site shown below e Internet web site http www samsung com Worldwide http www samsung com monitor U S A http www sec co kr monitor Korea http
80. to change the Q Q brightness according to personal preference You can use the on screen menus to change the contrast Contrast according to personal preference Q Q Not available in MagicColor mode of Full and Intelligent Color Menu Description Play Stop MagicColor Color Tone Color Control Gamma Image MagicColor is a new technology that Samsung has exclusively developed to improve digital image and to display natural color more clearly without disturbing image quality 1 Off Returns to the original mode 2 Demo The screen before applying MagicColor appears on the right and the screen after applying MagicColor appears on the left 3 Full Displays not only vivid natural color but also more realistic natural skin color with clearness 4 Intelligent Displays vivid natural color with clearness 5 MagicZone The MagicZone ensures the clear and sharp display of animated multimedia or photo images by enhancing the brightness sharpness saturation hue of a certain area on the screen Especially MagicZone is appropriate to using the moving picture Hue This function is to adjust the hue of the MagicZone Saturation This function is to adjust the saturation of the MagicZone Brightness This function is to adjust the brightness of the MagicZone Sharpness This function is to adjust the sharpness of the MagicZone H Position This function is to mov
81. trast by using the OSD menu 2 Text For documentations or work involving a lot of text 3 Internet For working with a mixture of images such as text and graphics 4 Game For watching motion pictures such as a game 5 Sport For watching motion pictures such as a sport 6 Movie For watching motion pictures such as a DVD or Video CD 7 Dynamic Contrast Dynamic Contrast is to automatically detect distribution of inputted visual signal and adjust to create optimum contrast gt gt Click here to see an animation clip Brightness button When OSD is not on the screen push the button to adjust E brightness Adjust buttons w a Adjust items in the menu og Enter button Activates a highlighted menu item Source button Push the then selects the video signal while the OSD is off When the source button is pressed to change the input mode a message appears in the upper left of the screen displaying the current mode analog or digital input signal Note If you select the digital mode you must connect your monitor to the graphic card s DVI port using the DVI cable AUTO button Use this button for auto adjustment O Power button 5 Use this button for turn the monitor on and off Power indicator This light glows blue during normal operation and blinking blue once as the monitor saves your adjustments LY See PowerSaver described in the manual for further information regarding power saving N functions
82. uctions Introduction M Setup E Adjusting Your Monitor E Troubleshooting General PowerSaver Preset Timing Modes General General Model Name SyncMaster 940T LCD Panel Size 19 inch 48 cm Display area 376 32 mm H x 301 056 mm V Pixel Pitch 0 294 mm H x 0 294 mm V Synchronization Horizontal 30 kHz 81 kHz Vertical 56 Hz 75 Hz Display Color 16 7 M Resolution Optimum resolution 1280 x 1024 60 Hz Maximum resolution 1280 x 1024 75 Hz Input Signal Terminated RGB Analog DVI Digital Visual Interface Compliant Digital RGB 0 7 Vp p t 5 Ho separate H V sync Composite SOG TTL level V high 2 0 V V low lt 0 8 V Maximum Pixel Clock 135 MHz Analog Digital Analog Digital Power Supply AC 100 240 V 10 50 60 Hz Signal Cable 15pin to 15pin D sub cable Detachable DVI D to DVI D connector Detachable not supplied Dimensions WxHxD Weight 416 6 X 377 5 X 64 2 mm 16 4 X 14 9 X 2 5 Without Stand 416 6 X 420 6 X 200 0 mm 16 4 X 16 6 X 7 9 With Stand 6 7 kg 14 8 Ibs VESA Mounting Interface 100 mm x 100 mm for use with Specialty Arm Mounting hardware Environmental considerations Operating Temperature 50 F 104 F 10 C 40 C Humidity 10 80 non condensing Storage Temperature 4 F 113 F 20 C 45 C Humidity 5 95 non condensing Plug and Play Capability This monitor can be installed on any Plug amp Play compatible system The interaction o
83. ung Electronics Co Ltd is strictly forbidden Samsung Electronics Co Ltd shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing performance or use of this material Samsung is the registered trademark of Samsung Electronics Co Ltd Microsoft Windows and Windows NT are registered trademarks of Microsoft Corporation VESA DPMS and DDC are registered trademarks of Video Electronics Standard Association the ENERGY STAR name and logo are registered trademarks of the U S Environmental Protection Agency EPA All other product names mentioned herein may be the trademarks or registered trademarks of their respective owners PRODUCT INFORMATION Image Retention Free LCD Monitors and TVs may have image retention when switching from one image to another especially after displaying a stationary image for a long time This guide is to demonstrate correct usage of LCD products in order to protect them from Image retention Warranty Warranty does not cover any damage caused by image retention Burn in is not covered by the warranty What is Image retention During normal operation of a LCD panel pixel image retention doesn t occur However if the same image is displayed for a long time a slight difference in electric charge accumulates between the two electrodes which encase the liquid crystal This may cause the liquid crystal to build up in a certain areas
84. utton Pligg and Play Monitor Pio par bis T di Hardware Update Wizard SS Cena Cee Welcome to the Hardware Update wa Fhag araj Fisy kA cont on i ho Wirard Dumas Pravicdes hierer Tiia winaed hepa ou inatall iasa for Caves Pako er es Pig armel Play Morde Dua Yes or 1 10 Digtal Segarra Micro wd edo NT Pabalan Paa aap a ala ll Wee hi la Ugasis Durie Tainga thee diea dow lee cherie Whaa che poea iad Hines weed Lin de w the anfhewane gutortically Recommended j Pikes doe Maila sier upakabing ihe drives roll zs Irak Bol task Driver Beak tothe previcuse ro oe dove i natal bon a let of penie kalan advanced Urdvatet O Total tho chives pha Dick Next lo continue e E a Co If pour hacdwase come with an installation CD Lua ot hope disk maa ob nog 6 Select Don t search I will then click Next and then click Have disk Hardware Update Wizard Hardware Update Wizard Piesce chooce pee ceanch and mctlallation opin aa Sellen the devine dived piu want bo aatal Na this haniaaie 21 esch iy tha beat diwa in hese kean ii Gees the marilag ae model of your hada diaa ond then chek Hasi yous hase a dak that conina they dieser wou want lo inelall obo Hawa Cink Loe thee cheek Expert bako ka kmi cn aqua the default search which include boa pathi arei servers ede mihia Thi bett dere loud ball be nc alent el hoes gompahbia Pescara Minda Da nag and Pap Honto o searc
85. vailable in analog mode only Play Stop 29 29 29 29 29 Language H Position V Position Transparency Display Time O Setup M MENU Description Play Stop You can choose one of eight languages English Deutsch Espa ol Fran ais Italiano Svenska PyYCCKHH Portugu s 29 Note The language chosen affects only the language of the OSD It has no effect on any software running on the computer You can change the horizontal position where the OSD Q Q menu appears on your monitor MB You can change the vertical position where the OSD menu appears on your monitor Change the transparency of the background of the OSD Q Q The menu will be automatically turned off if no adjustments are made for a certain time period You can set the amount of time the menu will wait before it is turned off Menu Auto Source Image Reset Color Reset Priority Description Select Auto Source for the monitor to automatically select the signal source Image parameters are replaced with the factory default values Color parameters are replaced with the factory default values This is a source switch function according to the priority that the user has set for the source Information Play Stop 29 29 29 a9 Menu Description Information Shows a video source display mode on the OSD screen SyncMaster 940T The color and appearance of the product may wary depending on th

Samsung 940T Computer Monitor User Manual

Contents

Download Pdf Manuals

Related Search

Related Contents