Home
Q-Logic 59047-10 D Switch User Manual
Contents
1. 3 42 teplnErrs 1 3 6 1 2 116 14 cece vids behead CE eee eee Re Ke KA 3 42 tcpOutRsts 1 3 6 1 2 1 6 15 3 42 The UDP Group pa kaaa AAA e aR a a kea 3 43 udplnDatagrams 1 3 6 1 2 1 7 1 3 43 udpNoPorts 1 3 6 1 2 1 7 2 3 43 udpinErrors 1 3 6 1 2 1 7 3 3 43 udpOutDatagrams 1 3 6 1 2 1 7 4 3 44 The UDP Listener Table 3 44 udpLocalAddress 1 3 6 1 2 1 7 5 1 1 3 44 udpLocalPort 1 3 6 1 2 1 7 5 1 2 3 44 The EGP SU ii IAEA KA 3 45 egplnMsgs 1 3 6 1 2 1 8 1 3 45 egplnErrors 1 3 6 1 2 1 8 2 3 45 egpOutMsgs 1 3 6 1 2 1 8 3 3 45 egpOutErrors 1 3 6 1 2 1 8 4 3 46 The EGP Neighbor Table 3 46 egpNeighState 1 3 6 1 2 1 8 5 1 1 3 46 egpNeighAddr 1 3 6 1 2 1 8 5 1 2 3 46 egpNeighAs 1 3 6 1 2 1 8 5 1 3 3 47 egpNeighInMsgs 1 3 6 1 2 1 8 5 1 4 3 47 egpNeighInErrs 1 3 6 1 2 1 8 5 1 5 3 47 egpNeighOutMsgs 1 3 6 1 2 1 8 5 1 6 3 47 egpNeighOutErrs 1 3 6
2. 4 19 MeVISION Table Habaan RA percre tkd a seed U4 Shae os ES wares 4 20 connUnitRevsUnitld 1 3 6 1 3 94 1 7 1 1 4 20 connUnitRevsIndex 1 3 6 1 3 94 1 7 1 2 4 20 connUnitRevsRevld 1 3 6 1 3 94 1 7 1 3 4 21 connUnitRevsDescription 1 3 6 1 3 94 1 7 1 4 4 21 Sensor Fa crores carves aiee sed tenes GoM eee CES Te uik 4 22 connUnitSensorUnitld 1 3 6 1 3 94 1 8 1 1 4 22 connUnitSensorIndex 1 3 6 1 3 94 1 8 1 2 4 22 connUnitSensorName 1 3 6 1 3 94 1 8 1 3 4 23 connUnitSensorStatus 1 3 6 1 3 94 1 8 1 4 4 24 connUnitSensorInfo 1 3 6 1 3 94 1 8 1 5 4 25 connUnitSensorMessage 1 3 6 1 3 94 1 8 1 6 4 26 connUnitSensorType 1 3 6 1 3 94 1 8 1 7 4 27 connUnitSensorCharacteristic 1 3 6 1 3 94 1 8 1 8 4 28 POU ADE AA AA eee es 4 29 connUnitPortUnitld 1 3 6 1 3 94 1 10 1 1 4 29 connUnitPortindex 1 3 6 1 3 94 1 10 1 2 4 29 connUnitPortType 1 3 6 1 3 94 1 10 1 3 4 30 connUnitPortFCClassCap 1 3 6 1 3 94 1 10 1 4 4 31 connUnitPortFCClassOp 1 3 6 1 3 94 1 10 1 5 4 32 connUnitPortState 1 3 6 1 3 94 1 10 1 6 4 32 connUnitPortStatus 1 3 6 1 3 94 1 10 1 7
3. 4 46 connUnitREventTime 1 3 6 1 3 94 1 11 1 4 4 46 connUnitSEventTime 1 3 6 1 3 94 1 11 1 5 4 47 connUnitEventSeverity 1 3 6 1 3 94 1 11 1 6 4 47 connUnitEventType 1 3 6 1 3 94 1 11 1 7 4 47 connUnitEventObject 1 3 6 1 3 94 1 11 1 8 4 48 connUnitEventDescr 1 3 6 1 3 94 1 11 1 9 4 48 Link Table 4 48 connUnitLinkUnitld 1 3 6 1 3 94 1 12 1 1 4 49 connUnitLinkIndex 1 3 6 1 3 94 1 12 1 2 4 49 connUnitLinkNodeldX 1 3 6 1 3 94 1 12 1 3 4 50 connUnitLinkPortNumberX 1 3 6 1 3 94 1 12 1 4 4 50 connUnitLinkPortWwnxX 1 3 6 1 3 94 1 12 1 5 4 50 connUnitLinkNodeldY 1 3 6 1 3 94 1 12 1 6 4 51 connUnitLinkPortNumberY 1 3 6 1 3 94 1 12 1 7 4 51 connUnitLinkPortWwnY 1 3 6 1 3 94 1 12 1 8 4 51 connUnitLinkAgentAddressY 1 3 6 1 3 94 1 12 1 9 4 52 connUnitLinkAgentAddressTypeY 1 3 6 1 3 94 1 12 1 10 4 52 connUnitLinkAgentPorty 1 3 6 1 3 94 1 112 1 11 4 52 connUnitLinkUnitTypeY 1 3 6 1 3 94 1 12 1 12 4 53 connUnitLinkConnldY 1 3 6 1 3 94 1 12 1 13 4 53 connUnitLinkCurrlndex 1 3 6 1 3 94 1 12 1 14 4 53 Xi Reference Guide Simple Ne
4. 3 52 EtherLike MIB dot3PauseOperMode 1 3 6 1 2 1 10 7 10 1 2 3 53 EtherLike MIB dot3InPauseFrames 1 3 6 1 2 1 10 7 10 1 3 3 53 EtherLike MIB dot3OutPauseFrames 1 3 6 1 2 1 10 7 10 1 4 3 53 The SNMP GroOUp wan 3 54 snmplnPkts 1 3 6 1 2 1 11 1 3 54 snmpOutPkts 1 3 6 1 2 1 11 2 3 54 snmpInBadVersions 1 3 6 1 2 1 11 3 3 54 snmpinBadCommunityNames 1 3 6 1 2 1 11 4 3 55 snmpInBadCommunityUses 1 3 6 1 2 1 11 5 3 55 snmpInASNParseErrs 1 3 6 1 2 1 11 6 3 55 snmpinTooBigs 1 3 6 1 2 1 11 8 3 55 snmpInNoSuchNames 1 3 6 1 2 1 11 9 3 56 snmpInBadValues 1 3 6 1 2 1 11 10 3 56 snmpInReadOnlys 1 3 6 1 2 1 11 11 3 56 snmpinGeneErrs 1 3 6 1 2 1 11 12 3 57 snmpinTotalRegVars 1 3 6 1 2 1 11 13 3 57 snmplnTotalSetVars 1 3 6 1 2 1 11 14 3 57 snmpinGetReguests 1 3 6 1 2 1 11 15 3 57 snmpInGetNexts 1 3 6 1 2 1 11 16 3 58 snmpinSetReguests 1 3 6 1 2 1 11 17 3 58 snmpinGetResponses 1 3 6 1 2 1 11 18 3 58 snmpinTraps 1 3 6 1 2 1 11 19 3 58
5. 3 64 ifCounterDiscontinuityTime 1 3 6 1 2 1 31 1 1 1 19 3 64 ifTableLastChange 1 3 6 1 2 1 31 5 3 65 Fibre Alliance MIB Objects FA MIB Definitions 4 1 revisionNumber 4 3 Connectivity Unit GrOUP 4 4 uNumber 1 3 6 1 3 94 1 1 4 4 systemURL 1 3 6 1 3 94 1 2 4 4 statusChangeTime 1 3 6 1 3 94 1 3 4 5 configurationChangeTime 1 3 6 1 3 94 1 4 4 5 connUnitTableChangeTime 1 3 6 1 3 94 1 5 4 5 Connectivity Table 4 6 connUnitld 1 3 6 1 3 94 1 6 1 1 4 6 connUnitGloballd 1 3 6 1 3 94 1 6 1 2 4 6 connUnitType 1 3 6 1 3 94 1 6 1 3 4 7 connUnitNumports 1 3 6 1 3 94 1 6 1 4 4 7 connUnitState 1 3 6 1 3 94 1 6 1 5 4 7 connUnitStatus 1 3 6 1 3 94 1 6 1 6 4 8 connUnitProduct 1 3 6 1 3 94 1 6 1 7 4 9 connUnitSn 1 3 6 1 3 94 1 6 1 8 4 9 connUnitUpTime 1 3 6 1 3 94 1 6 1 9 4 10 connUnitUrl 1 3 6 1 3 94 1 6 1 10 4 10 connUnitDomainld 1 3 6 1 3 94 1 6 1 1
6. 4 33 connUnitPortTransmitterType 1 3 6 1 3 94 1 10 1 8 4 34 connUnitPortModule Type 1 3 6 1 3 94 1 10 1 9 4 35 59047 10 D 59047 10 D Reference Guide Simple Network Management Protocol QLogic 3000 5000 9000 Series Fibre Channel Switch connUnitPortWwn 1 3 6 1 3 94 1 10 1 10 4 35 connUnitPortFCld 1 3 6 1 3 94 1 10 1 11 4 36 connUnitPortSn 1 3 6 1 3 94 1 10 1 12 4 36 connUnitPortRevision 1 3 6 1 3 94 1 10 1 13 4 36 connUnitPortVendor 1 3 6 1 3 94 1 10 1 14 4 37 connUnitPortSpeed 1 3 6 1 3 94 1 10 1 15 4 37 connUnitPortControl 1 3 6 1 3 94 1 10 1 16 4 38 connUnitPortName 1 3 6 1 3 94 1 10 1 17 4 40 connUnitPortPhysicalNumber 1 3 6 1 3 94 1 10 1 18 4 40 connUnitPortStatObject 1 3 6 1 3 94 1 10 1 19 4 41 connUnitPortProtocolCap 1 3 6 1 3 94 1 10 1 20 4 41 connUnitPortProtocolOp 1 3 6 1 3 94 1 10 1 21 4 42 connUnitPortNodeWwn 1 3 6 1 3 94 1 10 1 22 4 42 connUnitPortHWState 1 3 6 1 3 94 1 10 1 23 4 43 Event Table iss ageak Spats ee eee AA 4 44 connUnitEventUnitld 1 3 6 1 3 94 1 11 1 1 4 44 connUnitEventIndex 1 3 6 1 3 94 1 11 1 2 4 45 connUnitEventid 1 3 6 1 3 94 1 11 1 3
7. 6 3 7 Firmware Download MIB Objects Firmware Download MIB Definitions 7 1 qlgcChFwOpResult 1 3 6 1 4 1 3873 3 1 1 2 1 7 2 qlgcChFwOpRequest 1 3 6 1 4 1 3873 3 1 1 2 2 7 2 qlgcChFwDwldHostAddrType 1 3 6 1 4 1 3873 3 1 1 2 3 7 2 qlgcChFwDwldHostAddr 1 3 6 1 4 1 3873 3 1 1 2 4 7 3 59047 10 D xvii Reference Guide Simple Network Management Protocol QLogic 3000 5000 9000 Series Fibre Channel Switch EE qlgcChFwDwldHostPort 1 3 6 1 4 1 3873 3 1 1 2 5 7 3 qlgcChFwDwldPathName 1 3 6 1 4 1 3873 3 1 1 2 6 7 3 qlgcChFwDwldFileName 1 3 6 1 4 1 3873 3 1 1 2 7 7 3 qlgcChFwResetMethod 1 3 6 1 4 1 3873 3 1 1 2 8 7 4 8 Maintenance Panel Health Check MIB Objects Maintenance Panel MIB Definitions 8 1 qlgcMPStatus 1 3 6 1 4 1 3873 3 2 1 1 1 8 1 Related Maini aa e o a 8 2 qlgcMPStatusChange 1 3 6 1 4 1 3873 3 2 0 1 8 2 Glossary Index List of Figures Figure Page 1 1 SNMP Interface Architecture lt 24 cecer PAKA LABA LALA RANA KAEDAD hx 1 2 4 1 connUnitEventDescr Variable Format 4 96 List of Tables Table Page 1 1 Trap Severity Levels 1 3 3 1 MIB II Groups RP AA PE 3 1 4 1 FA MIB Textual Substitutions
8. Bit 7 Class six Bit 6 Class five Bit 5 Class four Bit 4 Class three Bit 3 Class two Bit 2 Class one Bit 1 Class F For example If Class 3 return value 0x10 fcFxPortintermixSuppAgreed 1 3 6 1 2 1 75 1 2 3 1 6 A variable indicating that the attached NxPort has requested the FxPort for the support of Intermix and the FxPort has granted the request This flag is only valid if Class 1 service is supported Syntax Access Status Return Value 5 18 TruthValue read only current Always returns false 2 59047 10 D 5 Fabric Element MIB Objects fcFxPortStackedConnModeAgreed 1 3 6 1 2 1 75 1 2 3 1 7 TO SSS fcFxPortStackedConnModeAgreed 1 3 6 1 2 1 75 1 2 3 1 7 A variable indicating whether the FxPort has agreed to support stacked connect from the Fabric Login This is only meaningful if the ports are using Class 1 service Syntax FcStackedConnMode Access read only Status current Return Value Always returns none 1 fcFxPortClass2SeqDelivAgreed 1 3 6 1 2 1 75 1 2 3 1 8 A variable indicating whether the FxPort has agreed to support Class 2 sequential delivery from the Fabric Login This is only meaningful if the ports are using Class 2 service Syntax TruthValue Access read only Status Current Return Value Always returns true 1 fcFxPortClass3SeqDelivAgreed 1 3 6 1 2 1 75 1 2 3 1 9 A flag indicating whether the FxPort has agreed to support Class 3 sequential delivery from the Fabric Logi
9. connUnitSnsPortindex 1 3 6 1 3 94 5 2 1 1 2 The physical port number of this SNS table entry Each physical port has an SNS table with 1 n entries indexed by ConnUnitSnsPortldentifier port address Syntax Access Status Return Value INTEGER read only mandatory The name server table index connUnitSnsPortldentifier 1 3 6 1 3 94 5 2 1 1 3 The port identifier for this entry in the SNS table Syntax FcAddressld Access read only Status mandatory Return Value 59047 10 D The 24 bit Fibre Channel address for each entry in the name server table based on Domain Area and ALPA 4 81 4 Fibre Alliance MIB Objects connUnitSnsPortName 1 3 6 1 3 94 5 2 1 1 4 iii E connUnitSnsPortName 1 3 6 1 3 94 5 2 1 1 4 The Port World Wide Name for this entry in the SNS table Syntax Access Status Return Value FcNameld read only mandatory The Port World Wide Name of the device in the name server table connUnitSnsNodeName 1 3 6 1 3 94 5 2 1 1 5 The Node name for this entry in the SNS table Syntax FcNameld Access read only Status mandatory Return Value The Node World Wide Name of the device in the name server table connUnitSnsClassOfSve 1 3 6 1 3 94 5 2 1 1 6 The classes of service offered by this entry in the SNS table Syntax Access Status Return Value 4 82 OCTET STRING SIZE 1 read only mandatory A value indicating the first registered class of service for an entry in
10. 4 91 Trap Table sabi aga MANG eal aces ee eae ewe a kee aoe te Y pen ee 4 92 trapMaxClients 1 3 6 1 3 94 2 1 4 93 trapClientCount 1 3 6 1 3 94 2 2 4 93 trapRegIpAddress 1 3 6 1 3 94 2 3 1 1 4 93 trapRegPort 1 3 6 1 3 94 2 3 1 2 4 94 trapRegFilter 1 3 6 1 3 94 2 3 1 3 4 94 trapRegRowState 1 3 6 1 3 94 2 3 1 4 4 95 Kili Traps scsi eraai nr haan e a GUN BGY NPA NY DNI PENA SS 4 96 connUnitStatusChange 1 3 6 1 3 94 0 1 4 96 connUnitDeletedTrap 1 3 6 1 3 94 0 3 4 96 connUnitEventTrap 1 3 6 1 3 94 0 4 4 96 connUnitSensorStatusChange 1 3 6 1 3 94 0 5 4 98 connUnitPortStatusChange 1 3 6 1 3 94 0 6 4 99 SOMOS cnc bak ERS S EG EERE SRELA SR eee EEE ERE Raw RARE oes 4 99 authenticationFailure 4 99 xiv 59047 10 D Reference Guide Simple Network Management Protocol QLogic 3000 5000 9000 Series Fibre Channel Switch nn aaa 5 Fabric Element MIB Objects Fibre Channel FE MIB Definitions 5 1 Configuration GrOUP 5 2 fcFeFabricName 1 3 6 1 2 1 75 1 1 1 5 3 fcFeElementName 1 3 6 1 2 1 75 1 1 2 5 3 fcFeModuleCapacity
11. IpAddress read only mandatory 59047 10 D 3 MIB II Objects tcpConnLocalPort 1 3 6 1 2 1 6 13 1 3 EE tcpConnLocalPort 1 3 6 1 2 1 6 13 1 3 The local port number for this TCP connection Syntax INTEGER 0 65535 Access read only Status mandatory tcpConnRemAddress 1 3 6 1 2 1 6 13 1 4 The remote IP address for this TCP connection Syntax IpAddress Access read only Status mandatory tcpConnRemPort 1 3 6 1 2 1 6 13 1 5 The remote port number for this TCP connection Syntax INTEGER 0 65535 Access read only Status mandatory 59047 10 D 3 41 3 MIB II Objects Additional TCP Objects E ee Additional TCP Objects Following are the additional TCP objects tcpInErrs 1 3 6 1 2 1 6 14 The total number of segments received in error for example bad TCP checksums Syntax Counter Access read only Status mandatory tcpOutRsts 1 3 6 1 2 1 6 15 The number of TCP segments sent containing the RST flag Syntax Counter Access read only Status mandatory 3 42 59047 10 D 3 MIB II Objects The UDP Group ST ESE The UDP Group Implementation of the UDP group is mandatory for all systems which implement the UDP udpInDatagrams 1 3 6 1 2 1 7 1 The total number of UDP datagrams delivered to UDP users Syntax Counter Access read only Status mandatory udpNoPorts 1 3 6 1 2 1 7 2 The total number of received UDP datagrams for which there was no application at the destination port Syn
12. New Value Trap3Enabled press ENTER to not specify value True False a to quit Trap3Address hostname IPv4 or IPv6 Address Trap3Port decimal value 1 65535 Trap3Severity select a severity level 1 unknown 2 emergency 6 warning 7 notify 2 4 59047 10 D Trap3Version Trap3Community SNMP Trap 4 Configuration may optionally use command Current Values Trap4 Trap4 Trap4 Trap4 Trap4 Trap4 New Val Trap4 Trap4 Trap4 Trap4 Enabled Address Port Severity Version Community ue Enabled Address Port Severity press ENTER to not specify value Trap4Version Trap4Community SNMP Trap 5 Configuration may optionally use command Current Values TrapbEnabled TrapbAddress TrapbPort Trap5Severity Trap5Version Trap5Community New Value TrapbEnabled TrapbAddress Trap5Port TrapoSeverity press ENTER to not specify value 2 Configuring a Switch Configuring a Switch Using the Command Line Interface TO CC 3 alert 8 info 4 critical 9 debug S error 10 mark Gk 7 2 string max 32 chars set setup snmp trap 4 False 0 0 0 0 162 warning 2 public a to quit True False IPv4 or IPv6 Address 1 65535 select a severity level hostname decimal value 1 unknown 6 warning 2 emergency 7 notify 3 alert 8 info 4 critical 9 debug S error 10 mark 1 2 string max 32 chars set s
13. Unsupported Always returns error status NoSuchName connUnitPlatformManagementUrl 1 3 6 1 3 94 5 2 2 1 10 Primary management URL for the platform If the platform registers more than one URL then this URL is equal to the first in the list Syntax Access Status Return Value DisplayString SIZE 0 79 read only mandatory Unsupported Always returns error status NoSuchName connUnitPlatformNumNodes 1 3 6 1 3 94 5 2 2 1 11 Number of nodes contained in the platform Syntax INTEGER Access read only Status mandatory Return Value 4 90 Unsupported Always returns error status NoSuchName 59047 10 D 4 Fibre Alliance MIB Objects connUnitPlatformNodeName 1 3 6 1 3 94 5 2 2 1 12 TO Cto connUnitPlatformNodeName 1 3 6 1 3 94 5 2 2 1 12 The name WWN world wide name of the node contained by the platform Syntax FeGloballd Access read only Status read only Return Value Unsupported Always returns error status NoSuchName 59047 10 D 4 91 4 Fibre Alliance MIB Objects Trap Table OO ee Trap Table Traps are asynchronous messages sent from the agent residing on the switch to the manager residing on the workstation to identify significant events There can be up to 5 trap addresses within the trap table All trap information is stored within the switch and is accessible to Telnet and the SNMP agent and is persistent between boots An example of how to access one of these objects given an
14. WWN Worldwide Name Zone A set of ports or devices grouped together to control the exchange of information 59047 10 D Reference Guide Simple Network Management Protocol QLogic 3000 5000 9000 Series Fibre Channel Switch TO SSSA Zone Set A set of zones grouped together The active zone set defines the zoning for a fabric 59047 10 D Glossary 5 Reference Guide Simple Network Management Protocol QLogic 3000 5000 9000 Series Fibre Channel Switch LC ee Glossary 6 59047 10 D Index A Accounting Groups 5 25 Additional IP Objects 3 29 Additional TCP Objects 3 42 Address Translation Group 3 12 Agent 1 1 Alert 1 3 4 92 atlflndex 3 12 atNetAddress 3 13 atPhysAddress 3 13 atTable 3 12 C Capability Group 5 33 Class 1 Accounting Table 5 25 Class 2 Accounting Table 5 29 Class 3 Accounting Table 5 31 Configuration Group 5 2 configurationChangeTime 4 5 Configuring switch 2 6 Connectivity Table 4 6 Connectivity Unit Group 4 4 connUnitConfigurationChangeTime 4 12 connUnitContact 4 16 connUnitControl 4 15 connUnitDomainld 4 10 connUnitEventCurrlD 4 18 connUnitEventDescr 4 48 connUnitEventFilter 4 17 connUnitEventld 4 46 connUnitEventindex 4 45 connUnitEventObject 4 48 connUnitEventSeverity 4 47 connUnitEventType 4 47 59047 10 D connUnitEventUnitld 4 44 connUnitGloballd 4 6 connUnitld 4 6 connUnitInfo 4 14 connUnitLinkAgentAddressTypeY 4 52 connUnitLinkAgentAddressY 4 52 connUnitLinkAgentP
15. unknown 1 invalid 2 resetConnUnitColdStart 3 resetConnUnitWarmStart 4 offlineConnUnit 5 onlineConnUnit 6 Access read write Status mandatory Return Value Refer to the following tables for connUnitControl values Table 4 5 connUnitContol Read Return Values Switch Setting Return Value Online Online 6 Offline Offline 5 Diagnostics Offline 5 Other Unknown 1 59047 10 D 4 15 4 Fibre Alliance MIB Objects connUnitContact 1 3 6 1 3 94 1 6 1 23 AA AA Table 4 6 connUnitContol Write Control Values Control Value Result Cold Reset 3 Reset Offline 5 Offline Online 6 Online other Not supported connUnitContact 1 3 6 1 3 94 1 6 1 23 Contact information for this connectivity unit and is persistent across boots Syntax DisplayString SIZE 0 79 Access read write Status mandatory Return Value The default is lt sysContact undefined gt The string size is limited to a maximum of 64 connUnitLocation 1 3 6 1 3 94 1 6 1 24 Location information for this connectivity unit and is persistent across boots Syntax DisplayString SIZE 0 79 Access read write Status mandatory Return Value The default is lt sysLocation undefined gt The string size is limited to a maximum of 64 4 16 59047 10 D connUnitEventFilter 1 3 6 1 3 94 1 6 1 25 4 Fibre Alliance MIB Objects connUnitEventFilter 1 3 6 1 3 94 1 6 1 25 EES This value defines the event seve
16. 3 3 sysLocation 1 3 6 1 2 1 1 6 3 4 sysServices 1 3 6 1 2 1 1 7 3 4 The Interfaces Group 3 5 ifNumber 1 3 6 1 2 1 2 1 3 5 59047 10 D jii Reference Guide Simple Network Management Protocol QLogic 3000 5000 9000 Series Fibre Channel Switch EE The Interfaces Table 3 5 ifIndex 1 3 6 1 2 1 2 2 1 1 3 5 ifDescr 1 3 6 1 2 1 2 2 1 2 3 6 ifType 1 3 6 1 2 1 2 2 1 3 3 6 DN 1 36 12122 1A soe is ee hPa a be ey 3 6 ifSpeed 1 3 6 1 2 1 2 2 1 5 3 7 ifPhysAddress 1 3 6 1 2 1 2 2 1 6 3 7 ifAdminStatus 1 3 6 1 2 1 2 2 1 7 3 7 ifOperStatus 1 3 6 1 2 1 2 2 1 8 3 8 ifLastChange 1 3 6 1 2 1 2 2 1 9 3 8 ifInOctets 1 3 6 1 2 1 2 2 1 10 3 8 ifinUcastPkts 1 3 6 1 2 1 2 2 1 11 3 8 ifInNUcastPkts 1 3 6 1 2 1 2 2 1 12 3 9 ifInDiscards 1 3 6 1 2 1 2 2 1 13 3 9 ifInErrors 1 3 6 1 2 1 2 2 1 14 3 9 ifInUnknownProtos 1 3 6 1 2 1 2 2 1 15 3 9 ifOutOctets 1 3 6
17. 4 1 4 2 Switch Operational States 4 7 4 3 QLogic 5000 Series Connectivity Unit Return Values 4 8 4 4 QLogic 9000 Series Connectivity Unit Return Values 4 9 4 5 connUnitContol Read Return Values 4 15 4 6 connUnitContol Write Control Values 4 16 4 7 connUnitEventFilter Read Return Values 4 17 4 8 connUnitEventFilter Control Write Values 4 17 4 9 QLogic 5000 9000 Series ConnUnitRevsRevid Return Values 4 21 4 10 QLogic 5200 5600 Series ConnUnitRevsDescription Return Values 4 21 4 11 QLogic 5200 5600 ConnUnitSensorName Return Values 4 23 4 12 QLogic 5202 5602 ConnUnitSensorName Return Values 4 23 4 13 QLogic 9000 ConnUnitSensorName Return Values 4 24 4 14 ConnUnitSensorStatus Return Values for Board Temperature 4 24 4 15 ConnUnitSensorStatus Return Values for Fan Status 4 25 4 16 ConnUnitSensorStatus Return Values for Voltage Status 4 25 4 17 ConnUnitSensorMessage Values 4 26 4 18 ConnUnitSensorType Return Values 4 27 4 19 ConnUnitSensorCharacteristic Values 4 28 4 20
18. Access read only Status mandatory Return Value The timestamp of the event 4 46 59047 10 D 4 Fibre Alliance MIB Objects connUnitSEventTime 1 3 6 1 3 94 1 11 1 5 TO ay connUnitSEventTime 1 3 6 1 3 94 1 11 1 5 This is the sysUpTime timestamp when the event occurred Syntax connUnitSEventTime Access read only Status mandatory Return Value Always returns error status NoSuchName connUnitEventSeverity 1 3 6 1 3 94 1 11 1 6 The event severity level Syntax FcEventSeverity Access read only Status mandatory Return Value Always returns error status NoSuchName connUnitEventType 1 3 6 1 3 94 1 11 1 7 The type of this event Syntax INTEGER unknown 1 other 2 status 3 configuration 4 topology 5 Access read only Status mandatory Return Value Always returns 3 Status 59047 10 D 4 47 4 Fibre Alliance MIB Objects connUnitEventObject 1 3 6 1 3 94 1 11 1 8 SS 7 7717 7 qy connUnitEventObject 1 3 6 1 3 94 1 11 1 8 This is used with the connUnitEventType to identify which object the event refers to Examples include connUnitPortStatus connUnitld connUnitPortIndex and connUnitStatus connUnitld Syntax OBJECT IDENTIFIER Access read only Status mandatory Return Value Always returns error status NoSuchName connUnitEventDescr 1 3 6 1 3 94 1 11 1 9 The description of the event Syntax DisplayString Access read only Status mandatory
19. Reference Guide Simple Network Management Protocol QLogic 3000 5000 9000 Series Fibre Channel Switch QLogic Intelligent Pass thru Module for IBM BladeCenter QLogic 20 Port SAN Switch Module for IBM BladeCenter QLogic Virtual Fabric Extension Module for IBM BladeCenter Firmware Version 7 x 8 x 9 x 59047 10 D Reference Guide Simple Network Management Protocol QLogic 3000 5000 9000 Series Fibre Channel Switch AA NN Information furnished in this guide is believed to be accurate and reliable However QLogic Corporation assumes no responsibility for its use nor for any infringements of patents or other rights of third parties which may result from its use QLogic Corporation reserves the right to change product specifications at any time without notice Applications described in this document for any of these products are for illustrative purposes only QLogic Corporation makes no representation nor warranty that such applications are suitable for the specified use without further testing or modification QLogic Corporation assumes no responsibility for any errors that may appear in this document Document Revision History Revision A April 2008 Revision B August 2008 Revision C October 2008 Revision D September 2011 Changes Pages Affected Updated to support firmware version 8 0 Updated format and branding Throughout Throughout 59047 10 D Table of Contents Preface IntendedAud
20. Syntax Counter32 Access read only Status current Return Value The total number of Class2Wordsin received by a port fcFxPortC2OutOctets 1 3 6 1 2 1 75 1 4 2 1 4 The number of Class 2 frame octets including the frame delimiters delivered through this FxPort to its attached NxPort Syntax Counter32 Access read only Status current Return Value The total number of Class2WordsOut sent by a port fcFxPortC2Discards 1 3 6 1 2 1 75 1 4 2 1 5 The number of Class 2 frames discarded by this FxPort Syntax Counter32 Access read only Status current Return Value The total number of Class2Toss discarded by a port 5 30 59047 10 D 5 Fabric Element MIB Objects fcFxPortC2FbsyFrames 1 3 6 1 2 1 75 1 4 2 1 6 TO SESE fcFxPortC2FbsyFrames 1 3 6 1 2 1 75 1 4 2 1 6 The number of F_BSY frames generated by this FxPort Syntax Counter32 Access read only Status current Return Value The total number of FBusy frames generated by this port for Class 2 and 3 frames fcFxPortC2FrjtFrames 1 3 6 1 2 1 75 1 4 2 1 7 The number of F RJT frames generated by this FxPort against Class 2 frames Syntax Counter32 Access read only Status current Return Value The total number of FReject frames generated by this port for Class 2 and 3 frames Class 3 Accounting Table The objects described in this section are in table format indexed by switch index and port index An example of how to access one of these objects is snmpget localhost
21. The destination IP address of this route An entry with a value of 0 0 0 0 is considered a default route Multiple routes to a single destination can appear in the table but access to such multiple entries is dependent on the table access mechanisms defined by the network management protocol in use Syntax IpAddress Access read write Status mandatory Return Value Writes not supported ipRoutelflndex 1 3 6 1 2 1 4 21 1 2 The index value which uniquely identifies the local interface through which the next hop of this route should be reached The interface identified by a particular value of this index is the same interface as identified by the same value of iflndex Syntax INTEGER Access read write Status mandatory Return Value Writes not supported 3 22 59047 10 D 3 MIB II Objects ipRouteMetric1 1 3 6 1 2 1 4 21 1 3 TU E ipRouteMetric1 1 3 6 1 2 1 4 21 1 3 The primary routing metric for this route The semantics of this metric are determined by the routing protocol specified in the route s ipRouteProto value If this metric is not used its value should be set to 1 Syntax INTEGER Access read write Status mandatory Return Value Writes not supported ipRouteMetric2 1 3 6 1 2 1 4 21 1 4 An alternate routing metric for this route The semantics of this metric are determined by the routing protocol specified in the route s ipRouteProto value If this metric is not used its value should be set to 1 Synt
22. command Current Values TraplEnabled False TraplAddress 10 0 0 254 TraplPort 5001 TraplSeverity info TraplVersion 2 raplCommunity public New Value press ENTER to not specify value q to quit TraplEnabled True False TraplAddress hostname IPv4 or IPv6 Address TraplPort decimal value 1 65535 TraplSeverity select a severity level 1 unknown 6 warning 59047 10 D 2 3 2 Configuring a Switch Configuring a Switch Using the Command Line Interface AA NY 2 emergency 7 notify 3 alert 8 info 4 critical 9 debug S error 10 mark TraplVersion 1 2 TraplCommunity string max 32 chars SNMP Trap 2 Configuration may optionally use set setup snmp trap 2 command Current Values Trap2Enabled False Trap2Address 10 20 43 231 Trap2Port 162 Trap2Severity info Trap2Version 2 Trap2Community public New Value Trap2Enabled press ENTER to not specify value True False a to quit Trap2Address hostname IPv4 or IPv6 Address Trap2Port decimal value 1 65535 Trap2Severity select a severity level 1 unknown 6 warning 2 emergency 7 notify 3 alert 8 info 4 critical 9 debug S error 10 mark Trap2Version 1 2 Trap2Community string max 32 chars SNMP Trap 3 Configuration may optionally use set setup snmp trap 3 command Current Values Trap3Enabled False Trap3Address 10 20 33 231 Trap3Port 162 Trap3Severity warning Trap3Version 2 Trap3Community public
23. 1 3 6 1 2 1 75 1 1 3 5 3 Module Table 5 4 fcFeModuleDescr 1 3 6 1 2 1 75 1 1 4 1 2 5 4 fcFeModuleObjectID 1 3 6 1 2 1 75 1 1 4 1 3 5 4 fcFeModuleOperStatus 1 3 6 1 2 1 75 1 1 4 1 4 5 5 fcFeModuleLastChange 1 3 6 1 2 1 75 1 1 4 1 5 5 6 fcFeModuleFxPortCapacity 1 3 6 1 2 1 75 1 1 4 1 6 5 6 fcFeModuleName 1 3 6 1 2 1 75 1 1 4 1 7 la 5 6 FxPort Configuration Table 5 7 fcFxPortName 1 3 6 1 2 1 75 1 1 5 1 2 5 7 fcFxPortFcphVersionHigh 1 3 6 1 2 1 75 1 1 5 1 3 9 7 fcFxPortFcphVersionLow 1 3 6 1 2 1 75 1 1 5 1 4 5 8 fcFxPortBbCredit 1 3 6 1 2 1 75 1 1 5 1 5 5 8 fcFkPortRkBufSize 1 3 6 1 2 1 75 1 1 5 1 6 5 8 feFxPortRatov 1 3 6 1 2 1 75 1 1 5 1 7 5 9 fcFxPortEdtov 1 3 6 1 2 1 75 1 1 5 1 8 5 9 fcFxPortCosSupported 1 3 6 1 2 1 75 1 1 5 1 9 5 9 fcFxPortIntermixSupported 1 3 6 1 2 1 75 1 1 5 1 10 5 10 fcFxPortStackedConnMode 1 3 6 1 2 1 75 1 1 5 1 11 5 10 fcFxPortClass2SeqDeliv 1 3 6 1 2 1 75 1 1 5 1 12 5 10 fcFxPortClass3SeqDeliv 1 3 6 1 2 1 75 1 1 5 1 13 5 11 fcFxPortHoldTime 1 3 6 1 2 1 75 1 1 5 1 14 5
24. 1 3 6 1 3 94 1 10 1 20 Bit mask that specifies the driver level protocol capability of this port If this is not applicable returns all bits set to zero The bits have the following definitions unknown 0 Loop 1 Fabric 2 SCSI 4 TCP IP 8 VI 16 FICON 32 Syntax OCTET STRING SIZE 2 Access read only Status mandatory Return Value Always returns 0x03 Loop Fabric 59047 10 D 4 41 4 Fibre Alliance MIB Objects connUnitPortProtocolOp 1 3 6 1 3 94 1 10 1 21 ii connUnitPortProtocolOp 1 3 6 1 3 94 1 10 1 21 Bit mask that specifies the driver level protocol s that are currently operational If not applicable return all bits set to zero This object has the same definition as connUnitPortProtocolCap Syntax OCTET STRING SIZE 2 Access read only Status unsupported Return Value Always returns error status NoSuchName connUnitPortNodeWwn 1 3 6 1 3 94 1 10 1 22 The Node World Wide Name of the port if applicable otherwise all zeros This should have the same value for a group of related ports The container is defined as the largest physical entity For example all ports on HBAs on a host will have the same Node WWN All ports on the same storage subsystem will have the same Node WWN connUnitPortEntry 22 Syntax FcNameld Access read only Status mandatory Return Value Returns the World Wide Node Name of the switch For example 10 00 00 CO DD 00 71 C9 4 42 59047 10
25. 12 16 20 varies depending on number of licensed ports fcFeModuleName 1 3 6 1 2 1 75 1 1 4 1 7 The Name ldentifier of the switch Syntax FcNameld Access read write Status current Return Value The World Wide Name of the switch Writes are not supported For example 10 00 00 CO DD 00 71 C9 5 6 59047 10 D 5 Fabric Element MIB Objects FxPort Configuration Table ls FxPort Configuration Table The objects described in this section are in table format indexed by switch index and port index An example of how to access one of these objects is snmpget localhost public fcFxPortName 1 1 This table contains one entry for each FxPort and Configuration parameters of the ports This table contains one entry for each FxPort configuration parameters of the ports fcFxPortName 1 3 6 1 2 1 75 1 1 5 1 2 The World Wide Name of this FxPort Each FxPort has a unique Port World Wide Name within the Fabric Syntax FcNameld Access read only Status current Return Value Returns the Port World Wide Name for each port on switch For example the return value for port 2 would be 20 02 00 CO DD 00 71 C9 and the return value for port 14 would be 20 OE 00 CO DD 00 71 C9 fcFxPortFcphVersionHigh 1 3 6 1 2 1 75 1 1 5 1 3 The highest or most recent version of FC PH that the FxPort is configured to support Syntax FephVersion Access read only Status Current Return Value Always returns 32 0x20 59047 10 D 5 7 5 Fabri
26. Related Traps ls Table 6 3 fcFxPortPHysOperStatus Return Values Status Return Value Online online 1 Offline offline 2 Diagnostic testing 3 Down linkfailure 4 Related Traps The following traps contain the trap information being sent from the agent to the manager qiSB2PortLinkDown qLogicExperimental 0 10 A linkDown trap signifies that the SNMP entity acting in an agent role has detected that the fcQxPortPhysOperStatus object for one of its communication links has left the online state and transitioned to some other state The current state is indicated by the included value of fcQxPortPhysOperStatus Variables f QxPortPhysAdminStatus fcQxPortPhysOperStatus qISB2PortLinkUp qLogicExperimental 0 11 A linkUp trap signifies that the SNMP entity acting in an agent role has detected that the fcQxPortPhysOperStatus object for one of its communication links has entered the online state from some other state The current state is indicated by the included value of fcQxPortPhysOperStatus Variables f QxPortPhysAdminStatus fcQxPortPhysOperStatus qlconnUnitAddedTrap qLogicExperimental 0 12 A connUnit has been added to this agent Variables connUnitld 59047 10 D 6 3 6 QLOGIC MIB Objects qlconnUnitAddedTrap qLogicExperimental 0 12 ee 6 4 59047 10 D Firmware Download MIB Objects This section covers the implementation details for the Firmware Download Management Inform
27. Return Value Always returns an empty string 59047 10 D 4 25 4 Fibre Alliance MIB Objects connUnitSensorMessage 1 3 6 1 3 94 1 8 1 6 ui connUnitSensorMessage 1 3 6 1 3 94 1 8 1 6 This describes the status of the sensor as a message It may also provide more resolution on the sensor indication For example Cover temperature 1503K above nominal operating range connUnitSensorEntry 6 Syntax DisplayString Access read only Status mandatory Return Value Refer to Table 4 17 for QLogic 5200 5600 Series connUnitSensorMessage values Table 4 17 ConnUnitSensorMessage Values Sensor Value Power Supply Good Bad NotInstalled Fan Good Bad Notinstalled Temperature Status Normal Warm Overheating NotInstalled Temperature Value Degrees in C 4 26 59047 10 D 4 Fibre Alliance MIB Objects connUnitSensorType 1 3 6 1 3 94 1 8 1 7 aaa connUnitSensorType 1 3 6 1 3 94 1 8 1 7 The type of component being monitored by this sensor Syntax INTEGER unknown 1 other 2 battery 3 fan 4 power supply 5 transmitter 6 enclosure 7 board 8 receiver 9 Access read only Status mandatory Return Value Refer to Table 4 18 for connUnitSensorType return values Table 4 18 ConnUnitSensorType Return Values Sensor Value Temperature Board 8 Fan Fan 4 Power Supply Power Supply 5 Voltage Board 8 59047 10 D 4 27 4 Fibre Alliance MIB Objects connUnitS
28. Return Value The total number of TxOfflineSeqs transmitted by a port 4 74 59047 10 D 4 Fibre Alliance MIB Objects connUnitPortStatCountNumberOfflineSequences 1 3 6 1 3 94 4 5 1 38 OO EE connUnitPortStatCountNumberOfflineSequences 1 3 6 1 3 94 4 5 1 38 Count of offline primitive sequences received at this port This is a Fibre Channel only statistic Syntax OCTET STRING SIZE 8 Access read only Status mandatory Return Value The total number of TotalOfflineSeqs received by a port connUnitPortStatCountLinkFailures 1 3 6 1 3 94 4 5 1 39 Count of link failures This count is part of the Link Error Status Block LESB FC PH 29 8 This is a Fibre Channel only statistic Syntax OCTET STRING SIZE 8 Access read only Status mandatory Return Value The total number of LinkFailures for a port connUnitPortStatCountInvalidCRC 1 3 6 1 3 94 4 5 1 40 Count of frames received with invalid CRC This count is part of the Link Error Status Block LESB FC PH 29 8 Loop ports should not count CRC errors passing through when monitoring This is a Fibre Channel only statistic Syntax OCTET STRING SIZE 8 Access read only Status mandatory Return Value The total number of InvalidCRCs received by a port 59047 10 D 4 75 4 Fibre Alliance MIB Objects connUnitPortStatCountInvalidTxWords 1 3 6 1 3 94 4 5 1 41 uu connUnitPortStatCountInvalidTxWords 1 3 6 1 3 94 4 5 1 41 Count of invalid transmission wor
29. T TCP Connection Table 3 40 TCP Group 3 36 tcpActiveOpens 3 37 tcpAttemptFails 3 38 tcpConnLocalAddress 3 40 tcpConnLocalPort 3 41 tcpConnRemAddress 3 41 tcpConnRemPort 3 41 tcpConnState 3 40 tcpCurrEstab 3 38 tcpEstabResets 3 38 tcpInErrs 3 42 tcpInSegs 3 38 tcpMaxConn 3 37 tcpOutRsts 3 42 tcpOutSegs 3 39 tcpPassiveOpens 3 37 59047 10 D tcpRetransSegs 3 39 tcpRtoAlgorithm 3 36 tcpRtoMax 3 36 tcpRtoMin 3 36 Transmission Group 3 50 trap severity levels 1 2 4 92 Trap Table 4 92 trapRegFilter 4 94 trapReglpAddress 4 93 trapRegPort 4 94 trapRegRowState 4 95 U UDP Group 3 43 UDP Listener Table 3 44 udpInDatagrams 3 43 udpInErrors 3 43 udpLocalAddress 3 44 udpLocalPort 3 44 udpNoPorts 3 43 udpOutDatagrams 3 44 Unknown 1 3 4 92 uNumber 4 4 W Warning 1 3 4 92 Index 7 Reference Guide Simple Network Management Protocol QLogic 3000 5000 9000 Series Fibre Channel Switch LC ee Index 8 59047 10 D re Corporate Headquarters QLogic Corporation 26650 Aliso Viejo Parkway Aliso Viejo CA 92656 949 389 6000 www qlogic com QLOGIC International Offices UK Ireland Germany France India Japan China Hong Kong Singapore Taiwan 2000 2011 QLogic Corporation Specifications are subject to change without notice All rights reserved worldwide QLogic the QLogic logo QuickTools and Enterprise Fabric Suite are trademarks or registered trademarks of QLogic Corporation Gnome is a trademark of the
30. Unknown 1 Emergency Alert Critical Error Warning Notify Info O A N ODO aA A WB N Debug Mark 4 o Management Information Base Management information bases MIBs define the properties of the managed object within the device to be managed Every managed device keeps a database of values for each definition written in the MIB It is not the actual database itself it is implementation dependant Definition of the MIB conforms to the Structure of Management Information SMI given in Request For Comment RFC 1155 The latest Internet MIB is given in RFC 1213 and is sometimes called MIB II User Datagram Protocol QLogic switches support the following User Datagram Protocol UDP settings m Agents listen on UDP port 161 RB Responses are sent back to the originating Network Management Station NMS port from a dynamic port although many agents use port 161 also for this target m The maximum SNMP message size is 65507 octets maximum UDP message size m The minimum receive packet size for SNMP implementations is 484 octets in length m Agent and Network Monitoring Systems are responsible for determining error recovery 59047 10 D 1 3 1 SNMP Overview Numbering System Conventions Numbering System Conventions The conventions for numbering systems in this guide are as follows m Decimal 101 m Hexadecimal 0x101 m Binary 101b 59047 10 D 2 Configuring a Switch This sec
31. entity when decoding received SNMP messages Syntax Counter Access read only Status mandatory snmpInTooBigs 1 3 6 1 2 1 11 8 The total number of SNMP PDUs delivered to the SNMP protocol entity and for which the value of the error status field is tooBig Syntax Counter Access read only Status mandatory 59047 10 D 3 55 3 MIB II Objects snmpInNoSuchNames 1 3 6 1 2 1 11 9 ee snmpInNoSuchNames 1 3 6 1 2 1 11 9 The total number of SNMP PDUs delivered to the SNMP protocol entity and for which the value of the error status field is NoSuchName Syntax Counter Access read only Status mandatory snmpInBadValues 1 3 6 1 2 1 11 10 The total number of SNMP PDUs delivered to the SNMP protocol entity and for which the value of the error status field is badValue Syntax Counter Access read only Status mandatory snmpInReadOnlys 1 3 6 1 2 1 11 11 The total number valid SNMP PDUs delivered to the SNMP protocol entity and for which the value of the error status field is readOnly It should be noted that it is a protocol error to generate an SNMP PDU which contains the value readOnly in the error status field as such this object is provided as a means of detecting incorrect implementations of the SNMP Syntax Counter Access read only Status mandatory 3 56 59047 10 D 3 MIB II Objects snmpInGenErrs 1 3 6 1 2 1 11 12 TO QNG snmpInGenErrs 1 3 6 1 2 1 11 12 The total number of
32. 1 3 6 1 3 94 5 2 1 1 7 4 83 connUnitSnsProcAssoc 1 3 6 1 3 94 5 2 1 1 8 4 83 connUnitSnsFC4Type 1 3 6 1 3 94 5 2 1 1 9 4 83 connUnitSnsPortType 1 3 6 1 3 94 5 2 1 1 10 4 84 connUnitSnsPortlPAddress 1 3 6 1 3 94 5 2 1 1 11 4 84 connUnitSnsFabricPortName 1 3 6 1 3 94 5 2 1 1 12 4 85 connUnitSnsHardAddress 1 3 6 1 3 94 5 2 1 1 13 4 85 connUnitSnsSymbolicPortName 1 3 6 1 3 94 5 2 1 1 14 4 85 connUnitSnsSymbolicNodeName 1 3 6 1 3 94 5 2 1 1 15 4 86 Platform Table 4 87 connUnitPlatformMaxEntry 1 3 6 1 3 94 5 1 2 4 87 connUnitPlatformIndex 1 3 6 1 3 94 5 2 2 1 1 4 87 connUnitPlatformNodelndex 1 3 6 1 3 94 5 2 2 1 2 4 88 connUnitPlatformUnitID 1 3 6 1 3 94 5 2 2 1 3 4 88 connUnitPlatformName 1 3 6 1 3 94 5 2 2 1 4 4 88 connUnitPlatformType 1 3 6 1 3 94 5 2 2 1 6 4 89 connUnitPlatformLabel 1 3 6 1 3 94 5 2 2 1 7 4 89 connUnitPlatformDescription 1 3 6 1 3 94 5 2 2 1 8 4 89 connUnitPlatformLocation 1 3 6 1 3 94 5 2 2 1 9 4 90 connUnitPlatformManagementUrl 1 3 6 1 3 94 5 2 2 1 10 4 90 connUnitPlatformNumNodes 1 3 6 1 3 94 5 2 2 1 11 4 90 connUnitPlatformNodeName 1 3 6 1 3 94 5 2 2 1 12
33. 10 D 4 Fibre Alliance MIB Objects connUnitPlatformType 1 3 6 1 3 94 5 2 2 1 6 ls connUnitPlatformType 1 3 6 1 3 94 5 2 2 1 6 The platform type Syntax Access Status Return Value FcUnitType read only mandatory Unsupported Always returns error status NoSuchName connUnitPlatformLabel 1 3 6 1 3 94 5 2 2 1 7 An administratively assigned symbolic name for the platform The Platform Label shall only contain print able ASCII characters Syntax Access Status Return Value DisplayString SIZE 0 79 read only mandatory Unsupported Always returns error status NoSuchName connUnitPlatformDescription 1 3 6 1 3 94 5 2 2 1 8 A textual description of the platform This value should include the full name and version identification of the platform s hardware type and software operating system The Platform Description shall only contain printable ASCII characters Syntax Access Status Return Value 59047 10 D DisplayString SIZE 0 79 read only mandatory Unsupported Always returns error status NoSuchName 4 89 4 Fibre Alliance MIB Objects connUnitPlatformLocation 1 3 6 1 3 94 5 2 2 1 9 AA NY connUnitPlatformLocation 1 3 6 1 3 94 5 2 2 1 9 The physical location of the platform e g telephone closet 3rd floor The Platform Location shall only contain printable ASCII characters Syntax Access Status Return Value DisplayString SIZE 0 79 read only mandatory
34. 13 1 6 1 byte bit mask that specifies the zoning capabilities supported by the fabric Bit 7 Soft zones supported Bit 6 Hard zones supported Bits 5 0 Reserved 59047 10 D 4 55 4 Fibre Alliance MIB Objects connUnitZoneEnforcementState 1 3 6 1 3 94 1 13 1 7 ee Syntax OCTET STRING SIZE 1 Access read only Status mandatory Return Value Always returns 0xCO connUnitZoneEnforcementState 1 3 6 1 3 94 1 13 1 7 1 byte bit mask that specifies the current enforcement of the Zone Set Bit 7 Soft zone set enforced Bit 6 Hard zone set enforced Bits 5 0 Reserved Syntax OCTET STRING SIZE 1 Access read only Status mandatory Return Value Returns the zone type Mapped as follows Sott 0x80 Hard 0x40 connUnitZoneAttributeBlock 1 3 6 1 3 94 1 13 1 8 A variable length structure that contains extended zone attributes defined in the FC GS 4 enhanced zone server See FC GS 4 draft standard for details and format of the structure Support of this object is optional Syntax OCTET STRING SIZE 80 Access read only Status mandatory Return Value Not supported Always returns SNMP error NoSuchName 4 56 59047 10 D 4 Fibre Alliance MIB Objects connUnitZoneNumMembers 1 3 6 1 3 94 1 13 1 9 SEE connUnitZoneNumMembers 1 3 6 1 3 94 1 13 1 9 Number of zone members in the zone connUnitZoneName Syntax INTEGER Access read only Status mandatory Return Value Returns total number of members in
35. 2 1 5 26 3 35 ThE TOP Group c ss2 eka aan gas ethdetdatet ester eisaseaee was F 3 36 tcpRtoAlgorithm 1 3 6 1 2 1 6 1 3 36 tcpRtoMin 1 3 6 1 2 1 6 2 3 36 tcpRtoMax 1 3 6 1 2 1 6 3 3 36 tcpMarConn 1 3 6 1 2 1 6 4 3 37 tcpActiveOpens 1 3 6 1 2 1 6 5 3 37 tcpPassiveOpens 1 3 6 1 2 1 6 6 3 37 tcpAttemptFails 1 3 6 1 2 1 6 7 3 38 tepEstabResets 1 3 6 1 2 1 6 8 3 38 tcpCurrEstab 1 3 6 1 2 1 6 9 3 38 tcpInSegs 1 3 6 1 2 1 6 10 3 38 tcpOutSegs 1 3 6 1 2 1 6 11 3 39 tcpRetransSegs 1 3 6 1 2 1 6 12 3 39 The TCP Connection Table 3 40 tcpConnState 1 3 6 1 2 1 6 13 1 1 3 40 tcpConnLocalAddress 1 3 6 1 2 1 6 13 1 2 3 40 Vi 59047 10 D Reference Guide Simple Network Management Protocol QLogic 3000 5000 9000 Series Fibre Channel Switch TT uu tcpConnLocalPort 1 3 6 1 2 1 6 13 1 3 3 41 tcoConnRemAddress 1 3 6 1 2 1 6 13 1 4 3 41 tcpConnRemPort 1 3 6 1 2 1 6 13 1 5 3 41 Additional TCP Objects
36. 3 6 1 2 1 75 1 2 2 1 3 E NN fcFxPortPhysLastChange 1 3 6 1 2 1 75 1 2 2 1 3 The value of sysUpTime at the time the FxPort entered its current operational status A value of zero indicates that the FxPort s operational status has not changed since the agent last restarted Syntax TimeStamp Access read only Status current Return Value Unsupported Always returns error status NoSuchName fcFxPortPhysRttov 1 3 6 1 2 1 75 1 2 2 1 4 The Receiver Transmitter Timeout value of the FxPort This is used by the receiver logic to detect a loss of synchronization Syntax Milliseconds Access read write Status current Return Value The default RT TOV parameter is 100 0x64 This is a global setting for the switch If writing value to a port all ports will reflect this new value Fx Port Fabric Login Table The objects described in this section are in table format indexed by switch index and port index An example of how to access one of these objects is snmpget localhost public fcFxPortFcphVersionAgreed 1 1 This table contains one entry for each FxPort in the fabric element and the service parameters that have been established from the most recent Fabric Login implicit or explicit This table contains one entry for each FxPort in the fabric element and the service parameters that have been established from the most recent Fabric Login implicit or explicit 5 16 59047 10 D 5 Fabric Element MIB Objects fcFxPortFcphVer
37. 8 Access read only Status mandatory Return Value Unsupported Always returns high order bit to 1 with all other bits set to zero 4 70 59047 10 D 4 Fibre Alliance MIB Objects connUnitPortStatCountClass3RxFrames 1 3 6 1 3 94 4 5 1 26 TO MMM connUnitPortStatCountClass3RxFrames 1 3 6 1 3 94 4 5 1 26 Count of Class 3 frames received at this port This is a Fibre Channel only statistic Syntax OCTET STRING SIZE 8 Access read only Status mandatory Return Value The total number of Class 3 frames received by a port connUnitPortStatCountClass3TxFrames 1 3 6 1 3 94 4 5 1 27 Count of Class 3 frames transmitted out this port This is a Fibre Channel only statistic Syntax OCTET STRING SIZE 8 Access read only Status mandatory Return Value The total number of Class 3 frames transmitted by a port connUnitPortStatCountClass3Discards 1 3 6 1 3 94 4 5 1 28 Count of Class 3 frames that were discarded upon reception at this port There is no FBSY or FRJT generated for Class 3 frames They are simply discarded if they cannot be delivered This is a Fibre Channel only statistic Syntax OCTET STRING SIZE 8 Access read only Status mandatory Return Value The total number of Class3Toss frames for a port 59047 10 D 4 71 4 Fibre Alliance MIB Objects connUnitPortStatCountRxMulticastObjects 1 3 6 1 3 94 4 5 1 29 SSS ne connUnitPortStatCountRxMulticastObjects 1 3 6 1 3 94 4 5 1 29 Count of Multicast
38. COA ipReasmFails 1 3 6 1 2 1 4 16 The number of failures detected by the IP reassembly algorithm for example timed out errors This is not necessarily a count of discarded IP fragments since some algorithms notably the algorithm in RFC 815 can lose track of the number of fragments by combining them as they are received Syntax Counter Access read only Status mandatory ipFragOKs 1 3 6 1 2 1 4 17 The number of IP datagrams that have been successfully fragmented at this entity Syntax Counter Access read only Status mandatory ipFragFails 1 3 6 1 2 1 4 18 The number of IP datagrams that have been discarded because they needed to be fragmented at this entity but could not because their Don t Fragment flag was set Syntax Counter Access read only Status mandatory 59047 10 D ppa 3 MIB II Objects ipFragCreates 1 3 6 1 2 1 4 19 WAA ipFragCreates 1 3 6 1 2 1 4 19 The number of IP datagram fragments that have been generated as a result of fragmentation at this entity Syntax Counter Access read only Status mandatory The IP Address Table The IP address table contains this entity s IP addressing information ip AdEntAddr 1 3 6 1 2 1 4 20 1 1 The IP address to which this entry s addressing information pertains Syntax IpAddress Access read only Status mandatory ipAdEntifindex 1 3 6 1 2 1 4 20 1 2 The index value which uniquely identifies the interface to which this entry is applicable
39. Class 1 connection This flag is only valid if the port is capable of supporting Class 1 service Syntax TruthValue Access read only Status current Return Value Always returns False 2 59047 10 D 5 35 5 Fabric Element MIB Objects fcFxPortCapStackedConnMode 1 3 6 1 2 1 75 1 5 1 1 9 SSS 7TAaAamama 442 rr fcFxPortCapStackedConnMode 1 3 6 1 2 1 75 1 5 1 1 9 A value indicating the mode of Stacked Connect request that the FxPort is capable of supporting Syntax FeStackedConnMode Access read only Status current Return Value Always returns None 1 fcFxPortCapClass2SeqDeliv 1 3 6 1 2 1 75 1 5 1 1 10 A flag indicating whether or not the FxPort is capable of supporting Class 2 Sequential Delivery Syntax TruthValue Access read only Status current Return Value Always returns true 1 fcFxPortCapClass3SeqDeliv 1 3 6 1 2 1 75 1 5 1 1 11 A flag indicating whether or not the FxPort is capable of supporting Class 3 Sequential Delivery Syntax TruthValue Access read only Status current Return Value Always returns true 1 5 36 59047 10 D 5 Fabric Element MIB Objects fcFxPortCapHoldTimeMaxv 1 3 6 1 2 1 75 1 5 1 1 12 fcFxPortCapHoldTimeMaxv 1 3 6 1 2 1 75 1 5 1 1 12 The maximum holding time that the FxPort is capable of supporting in microseconds Syntax MicroSeconds Access read only Status current Return Value 20000 0x4E20 fcFxPortCapHoldTimeMin 1 3 6 1 2 1 75 1 5 1 1 13 T
40. ConnUnitPortType Return Values 4 30 xviii 59047 10 D Reference Guide Simple Network Management Protocol QLogic 3000 5000 9000 Series Fibre Channel Switch OT RE ESS 4 21 4 22 4 23 4 24 4 25 4 26 4 27 4 28 4 29 4 30 5 1 5 2 5 3 5 4 5 5 5 6 6 1 6 2 6 3 ConnUnitPortState Return Values 4 32 ConnUnitPortTransmitterType Return Values 4 34 ConnUnitPortModuleType Return Values 4 35 ConnUnitPortControl Read Return Values 4 39 ConnUnitPortControl Write Command Values 4 39 ConnUnitPortHWState Port State Return Values 4 43 ConnUnitPortType State Return Values 4 84 Trap Severity Levels 4 92 connUnitEventDescr Variable Field Descriptions 4 97 FiterTrapLevels 4 97 FA MIB Textual Substitutions 5 1 Module Operational Status Return Values 5 5 Port OperationalModes 5 13 fcFxPortPhysAdminStatus Read Return Values 5 14 fcFxPortPhysAdminStatus Write Values 5 15 fcFxPortPHysOperStatus Return
41. ID 3 FC Address Others reserved Syntax Access Status Return Value INTEGER read only mandatory Returns the alias member Id type Mapped as follows WWN eeewe 0x01 Port WWN DomainPort 0x02 Domain 8 Port ID FC Address 0x03 FC Address other Oxff Vendor specific connUnitZoningAliasMemberlD 1 3 6 1 3 94 1 14 1 7 ID of the alias member based on connUnitZoningAliasMemberldType Syntax FeGloballd Access read only Status mandatory Return Value 59047 10 D Returns the alias zone member name as 16 8 bit octets Mapped as follows WWN member WWN 8 bytes followed by 8 bytes of zeros FC address FC address 3 bytes followed by 13 bytes of zeros Domain Port Domain Port address 2 bytes followed by 14 bytes of zeros 4 61 4 Fibre Alliance MIB Objects Port Statistics Table u Pa Port Statistics Table The objects described in this section are in a table format indexed by World Wide Name and Index The index represents the port number to interrogate An example of how to access one of these objects given a WWN of 100000c0dd0090a7 is snmpget localhost public fcmgmt statSet connUnitPortStatTable connUnitPortStatEntry connUni tPortStatUnitid 16 0 0 192 221 0 144 167 0 0 0 02 0 0 0 0 1 There is one and only one statistics table for each individual port For all objects in statistics table if the object is not supported by the conn unit then the
42. II and onwards each network protocol group contains its own address translation tables The Address Translation group contains one table which is the union across all interfaces of the translation tables for converting a NetworkAddress for example an IP address into a subnetwork specific address For lack of a better term this document refers to such a subnetwork specific address as a physical address Examples of such translation tables are for broadcast media where ARP is in use the translation table is equivalent to the ARP cache or on an X 25 network where non algorithmic translation to X 121 addresses is required The translation table contains the NetworkAddress to X 121 address equivalences atlfindex 1 3 6 1 2 1 3 1 1 1 Syntax Access Status The interface on which this entry s equivalence is effective The interface identified by a particular value of this index is the same interface as identified by the same value of iflndex INTEGER read write deprecated 59047 10 D 3 MIB II Objects atPhysAddress 1 3 6 1 2 1 3 1 1 2 ST QC atPhysAddress 1 3 6 1 2 1 3 1 1 2 The media dependent physical address Setting this object to a null string one of zero length has the effect of invalidating the corresponding entry in the atTable object That is it effectively disassociates the interface identified with the entry from the mapping identified with the entry It is an implementation specific matter as to
43. Status 5 19 Temperature Status 1 value per blade 20 45 Temperature Value I O blades have 4 val ues CPU blades have 7 values 46 60 Voltage Status all blade types have 1 value connUnitSensorStatus 1 3 6 1 3 94 1 8 1 4 The status indicated by the sensor Syntax INTEGER unknown 1 other 2 the sensor indicates other than ok warning or failure ok 3 the sensor indicates ok warning 4 the sensor indicates a warning failed 5 the sensor indicates failure Access read only Status mandatory Return Value Refer to the following tables for connUnitSensorStatus return values Table 4 14 ConnUnitSensorStatus Return Values for Board Temperature Switch Value Return Value Normal OK 3 Warm Warning 4 Overheating Failed 5 4 24 59047 10 D 4 Fibre Alliance MIB Objects connUnitSensorlnfo 1 3 6 1 3 94 1 8 1 5 Table 4 14 ConnUnitSensorStatus Return Values for Board Temperature Continued Switch Value Return Value Other Unknown 1 Table 4 15 ConnUnitSensorStatus Return Values for Fan Status Switch Value Return Value Good OK 3 Bad Failed 5 Unknown 1 Table 4 16 ConnUnitSensorStatus Return Values for Voltage Status Switch Value Return Value Good OK 3 Bad Failed 5 Other Unknown 1 connUnitSensorlnfo 1 3 6 1 3 94 1 8 1 5 Miscellaneous static information about the sensor such as its serial number Syntax DisplayString Access read only Status mandatory
44. This value should include the full name and version identification of the module Syntax Access Status Return Value SnmpAdminString read only current A configuration description of the module table entry The defaults are QLogic 5200 SANbox 5200 FC Switch QLogic 5202 SANbox 5202 FC Switch QLogic 5600 SANbox 5600 FC Switch QLogic 5602 SANbox 5602 FC Switch fcFeModuleObjectID 1 3 6 1 2 1 75 1 1 4 1 3 The vendor s authoritative identification of the module This value may be allocated within the SMI enterprises subtree 1 3 6 1 4 1 and provides a means for determining what kind of module is being managed For example this object could take the value 1 3 6 1 4 1 99649 3 9 if vendor Neufe Inc was assigned the subtree 1 3 6 1 4 1 99649 and had assigned the identifier 1 3 6 1 4 1 99649 3 9 to its FeFiFo 16 PlugInCard Syntax Access Status Return Value 5 4 OBJECT IDENTIFIER read only current The module identification numbers are QLogic 5200 1 3 6 1 4 1 1663 1 1 1 1 17 QLogic 5202 1 3 6 1 4 1 1663 1 1 1 1 30 QLogic 5600 1 3 6 1 4 1 1663 1 1 1 1 23 QLogic 5602 1 3 6 1 4 1 1663 1 1 1 1 24 59047 10 D 5 Fabric Element MIB Objects fcFeModuleOperStatus 1 3 6 1 2 1 75 1 1 4 1 4 ae fcFeModuleOperStatus 1 3 6 1 2 1 75 1 1 4 1 4 Switch definitions map 1 to 1 with the MIB definitions This object indicates the operational status of the module m online 1 the module is func
45. Values 5 15 fcQxPortPhysAdminStatus Read Return Values 6 2 fcQxPortPhysAdminStatus Write Values 6 2 fcFxPortPHysOperStatus Return Values 6 3 59047 10 D xix Reference Guide Simple Network Management Protocol QLogic 3000 5000 9000 Series Fibre Channel Switch LC ee XX 59047 10 D Preface This guide describes the support for Simple Network Management Protocol SNMP used with QLogic switch products This Simple Network Management Protocol Reference Guide describes how to use SNMP to manage and monitor the QLogic switch products This guide is organized as follows Section 1 provides an overview of SNMP objectives managers and agents traps Management Information Bases MIB and User Datagram Protocol Section 2 describes how to configure a QLogic switch using Telnet and the Enterprise Fabric Suite graphical user interface Section 3 describes the Management Information Bases MIB II Section 4 describes the Fibre Alliance Management Information Bases FA MIB version 4 0 Section 5 describes the Fabric Element Management Information Bases FE MIB Section 6 describes the QLOGIC Management Information Bases QLOGIC MIB Section 7 describes the Firmware Download Management Information Bases FD MIB Intended Audience This guide is intended for users responsible for the support of S
46. Wide Name of the local switch for each entry in the link table For example 10 00 00 CO DD 00 71 C9 00 NO 00 00 00 00 00 OO connUnitLinkPortNumberX 1 3 6 1 3 94 1 12 1 4 The port number on the unit specified by connUnitLinkNodeldX if known otherwise 1 If the value is non negative then it will be equal to connUnitPortPhysicalNumber Syntax INTEGER Access read only Status mandatory Return Value The local port number for each entry in the link table connUnitLinkPortWwnX 1 3 6 1 3 94 1 12 1 5 The port WWN of the unit specified by connUnitLinkNodeldX if known otherwise 16 octets of binary O connUnitLinkEntry 5 Syntax connUnitLinkPortWwnX Access read only Status mandatory Return Value The local World Wide port number for each entry in the link table 4 50 59047 10 D 4 Fibre Alliance MIB Objects connUnitLinkNodeldY 1 3 6 1 3 94 1 12 1 6 TO SEA connUnitLinkNodeldY 1 3 6 1 3 94 1 12 1 6 The Node WWN of the unit at the other end of the link If the Node WWN is unknown and the Node is a connUnit in the responding SNMP agency then the value of this object must be equal to its connUnitID Syntax OCTET STRING SIZE 16 Access read only Status mandatory Return Value The remote World Wide Node number for each entry in the link table connUnitLinkPortNumberY 1 3 6 1 3 94 1 12 1 7 The port number on the unit specified by connUnitLinkNodeldY if known otherwise 1 If the value is non negative the
47. among all connUnitSensorEntrys with the same value of connUnitSensorUnitld in the range between 1 and connUnitNumSensor connUnitSensorUnitld Syntax INTEGER 1 2147483647 Access read only Status mandatory Return Value The sensor table index 4 22 59047 10 D 4 Fibre Alliance MIB Objects connUnitSensorName 1 3 6 1 3 94 1 8 1 3 T a CPP connUnitSensorName 1 3 6 1 3 94 1 8 1 3 A textual identification of the sensor intended primarily for operator use Syntax DisplayString Access read only Status mandatory Return Value Refer to Table 4 11 for QLogic 5200 5600 connUnitSensorName return values Table 4 11 QLogic 5200 5600 ConnUnitSensorName Return Values Table Indez Return Value 1 Power Supply 1 Status 2 Temperature Status 3 Temperature Sensor 1 Value Refer to Table 4 12 for QLogic 5202 5602 connUnitSensorName return values Table 4 12 QLogic 5202 5602 ConnUnitSensorName Return Values Table Index Return Value 1 Power Supply 1 Status Power Supply 2 Status Fan 1 Status Fan 2 Status Temperature Status D a A O N Temperature Sensor 1 Value Refer to Table 4 12 for QLogic 9000 connUnitSensorName return values 59047 10 D 4 23 4 Fibre Alliance MIB Objects connUnitSensorStatus 1 3 6 1 3 94 1 8 1 4 EE Table 4 13 QLogic 9000 ConnUnitSensorName Return Values Table ao 2914 Return Value 1 Power Supply 1 Status 2 Power Supply 2 Status 3 Fan 1 Status 4 Fan 2
48. available for meaningful work offline 3 not available for meaningful work bypassed 4 no longer used 4 12 00 diagnostics 5 Access read only Status mandatory Return Value Refer to Table 4 21 for connUnitPortState return values Table 4 21 ConnUnitPortState Return Values Port Value Return Value Online online 2 Offline offline 3 Downed offline 3 Diagnostics diagnostics 5 other unknown 1 4 32 59047 10 D 4 Fibre Alliance MIB Objects connUnitPortStatus 1 3 6 1 3 94 1 10 1 7 EEE connUnitPortStatus 1 3 6 1 3 94 1 10 1 7 An overall protocol status for the port This value of connUnitPortState is not online then this is reported Unknown Syntax Access Status Return Value 59047 10 D INTEGER unknown 1 unused 2 device cannot report this status ready 3 FCAL Loop or FCPH Link reset protocol initialization complete warning 4 do not use 4 12 00 failure 5 do not use 4 12 00 notparticipating 6 loop not participating and does not have a loop address initializing 7 protocol is proceeding bypass 8 do not use 4 12 00 ols 9 FCP offline status other 10 status not described above read only mandatory Always returns unused 2 4 33 4 Fibre Alliance MIB Objects connUnitPortTransmitterType 1 3 6 1 3 94 1 10 1 8 E AY connUnitPortTransmitterType 1 3 6 1 3 94 1 10 1 8 The technology of the port transceiver Syntax I
49. by the Internet Engineering Task Force Management Workstation Workstation that manages the fabric through the fabric management switch 59047 10 D Reference Guide Simple Network Management Protocol QLogic 3000 5000 9000 Series Fibre Channel Switch TEE SSE MIB Management Information Base MSEnable Determines whether GS 3 management server commands will be accepted on the port It can be used to prevent in band management of the switch on any or all ports True False NL_Port Node Loop Port A Fibre Channel device port that supports arbitrated loop protocol N_Port Node Port A Fibre Channel device port in a point to point or fabric connection NMS Network Management Station Network Management Station The console through which an adminis trator performs management functions NoClose Causes the switch to keep the loop open if no other device is arbitrating It is intended to improve performance when there is a single L_Port device connected to the switch True False Node An addressable entity connected to an I O bus or network Used primarily to refer to computers storage devices and storage subsystems The component of a node that connects to the bus or network is a port Object In the context of access control an entity to which access is controlled and or usage of which is restricted to authorized subjects 59047 10 D QoS Quality of Service POST Power On Self Test Po
50. case the agent is ata non standard SNMP port Syntax INTEGER Access read only Status mandatory Return Value Returns value of 0 4 52 59047 10 D 4 Fibre Alliance MIB Objects connUnitLinkUnitTypeyY 1 3 6 1 3 94 1 12 1 12 SESE connUnitLinkUnitTypeY 1 3 6 1 3 94 1 12 1 12 Type of the Fibre Channel connectivity unit as defined in connUnitType Syntax FeUnitType Access read only Status mandatory Return Value The type of remote device in the link table For example switch 4 connUnitLinkConnldY 1 3 6 1 3 94 1 12 1 13 This is the Fibre Channel ID of this port If the connectivity unit is a switch this is expected to be a Big Endian value of 24 bits If this is loop then it is the ALPA that is connected If this is an E Port then it will only contain the domain ID If not any of those unknown or cascaded loop returns all bits set to 1 Syntax OCTET STRING SIZE 3 Access read only Status mandatory Return Value The remote Fibre Channel address of each entry in the link table connUnitLinkCurrIndex 1 3 6 1 3 94 1 12 1 14 The last used link index Syntax INTEGER Access read only Status mandatory Return Value The last used link table index number 59047 10 D 4 53 4 Fibre Alliance MIB Objects Zone Table OO NN Zone Table The objects described in this section are in a table format indexed Zone number and Index The zones are numbered 1 to connUnitZoneSetNumZones the index represents the member
51. delivered to the other end of the link This occurs if either the fabric or the destination port is temporarily busy FBSY can only occur on SOFc1 frames the frames that establish a connection This is a Fibre Channel only statistic Syntax OCTET STRING SIZE 8 Access read only Status mandatory Return Value Unsupported Always returns high order bit to 1 with all other bits set to zero 59047 10 D 4 67 4 Fibre Alliance MIB Objects connUnitPortStatCountClass1PBSYFrames 1 3 6 1 3 94 4 5 1 17 SS ee connUnitPortStatCountClass1PBSYFrames 1 3 6 1 3 94 4 5 1 17 Count of times that PBSY was returned to this port as a result of a Class 1 frame that could not be delivered to the other end of the link This occurs if the destination N Port is temporarily busy PBSY can only occur on SOF c1 frames the frames that establish a connection This is a Fibre Channel only statistic Syntax OCTET STRING SIZE 8 Access read only Status mandatory Return Value Unsupported Always returns high order bit to 1 with all other bits set to zero connUnitPortStatCountClass1FRJTFrames 1 3 6 1 3 94 4 5 1 18 Count of times that FRJT was returned to this port as a result of a Class 1 frame that was rejected by the fabric This is a Fibre Channel only statistic Syntax OCTET STRING SIZE 8 Access read only Status mandatory Return Value Unsupported Always returns high order bit to 1 with all other bits set to zero connUnitPortStatCountClas
52. higher level protocols requested be transmitted and which were addressed to a broadcast address at this sub layer including those that were discarded or not sent Syntax Counter32 Access read only Status current ifHighSpeed 1 3 6 1 2 1 31 1 1 1 15 An estimate of the interface s current bandwidth in units of 1 000 000 bits per second If this object reports a value of n then the speed of the interface is somewhere in the range of n 500 000 to n 499 999 For interfaces which do not vary in bandwidth or for those where no accurate estimation can be made this object should contain the nominal bandwidth For a sub layer which has no concept of bandwidth this object should be zero Syntax Gauge32 Access read only Status current ifPromiscuousMode 1 3 6 1 2 1 31 1 1 1 16 This object has a value of false 2 if this interface only accepts packets frames that are addressed to this station This object has a value of true 1 when the station accepts all packets frames transmitted on the media Mm true 1 m false 2 Syntax TruthValue Access read only Status current 59047 10 D 3 63 3 MIB II Objects if ConnectorPresent 1 3 6 1 2 1 31 1 1 1 17 SS ee ifConnectorPresent 1 3 6 1 2 1 31 1 1 1 17 This object has the value true 1 if the interface sublayer has a physical connector and the value false 2 otherwise E true 1 m false 2 Syntax TruthValue Access read only Status current ifAlias 1 3 6 1 2 1 31
53. object to the value invalid 2 has the effect of invalidating the corresponding entry in the ipRouteTable object That is it effectively disassociates the destination identified with the entry from the route identified with the entry It is an implementation specific matter as to whether the agent removes an invalidated entry from the table Accordingly management stations must be prepared to receive tabular information from agents that corresponds to entries not currently in use Proper interpretation of such entries requires examination of the relevant ipRouteType object Syntax INTEGER Access read write Status mandatory Return Value Writes not supported ipRouteProto 1 3 6 1 2 1 4 21 1 9 The routing mechanism through which this route was learned Inclusion of values for gateway routing protocols is not intended to imply that hosts should support those protocols Syntax INTEGER Access read only Status mandatory ipRouteAge 1 3 6 1 2 1 4 21 1 10 The number of seconds since this route was last updated or otherwise determined to be correct No semantics of too old can be implied except through knowledge of the routing protocol by which the route was learned Syntax INTEGER Access read write Status mandatory Return Value Writes not supported 59047 10 D 3 25 3 MIB II Objects ipRouteMask 1 3 6 1 2 1 4 21 1 11 il ipRouteMask 1 3 6 1 2 1 4 21 1 11 Indicate the mask to be logical ANDed with the destination ad
54. platforms connUnitPlatformMaxEntry 1 3 6 1 3 94 5 1 2 The maximum number of entries in the platform table Syntax INTEGER Access read only Status mandatory Return Value Unsupported Always returns error status NoSuchName connUnitPlatformindex 1 3 6 1 3 94 5 2 2 1 1 Unique table index for each platform Valid values are between 1 and connUnitPlatformsMaxEntry Syntax INTEGER 1 2147483647 Access read only Status mandatory Return Value Unsupported Always returns error status NoSuchName 59047 10 D 4 87 4 Fibre Alliance MIB Objects connUnitPlatformNodelndex 1 3 6 1 3 94 5 2 2 1 2 ii connUnitPlatformNodelndex 1 3 6 1 3 94 5 2 2 1 2 Unique table index for each platform node Valid values are between 1 and connUnitPlatformsNumNodes Syntax INTEGER 1 2147483647 Access read only Status mandatory Return Value Unsupported Always returns error status NoSuchName connUnitPlatformUnitID 1 3 6 1 3 94 5 2 2 1 3 The connUnitld of the connectivity unit that contains this Platform table Syntax FeGloballd Access read only Status mandatory Return Value Unsupported Always returns error status NoSuchName connUnitPlatformName 1 3 6 1 3 94 5 2 2 1 4 The platform name May be either a readable string or a unique ID format as specified in the FC GS 4 draft standard Syntax OCTET STRING SIZE 79 Access read only Status mandatory Return Value Unsupported Always returns error status NoSuchName 4 88 59047
55. port 2 would be 20 02 00 CO DD 00 71 C9 00 00 00 00 00 00 00 00 and the return value for port 2 would be 20 OE 00 CO DD 00 71 C9 00 NO 00 00 00 00 00 00 If a port is configured as a Donor return value 0 59047 10 D 4 35 4 Fibre Alliance MIB Objects connUnitPortFCld 1 3 6 1 3 94 1 10 1 11 E ee connUnitPortFCld 1 3 6 1 3 94 1 10 1 11 This is the assigned Fibre Channel ID of this port This value is expected to be a Big Endian value of 24 bits If this is a loop then it is the ALPA that is connected If this is an E Port then it will only contain the domain ID left justified zero filled If this port does not have a Fibre Channel address returns all bits set to 1 Syntax FcAddressld Access read only Status mandatory Return Value The address for each port based on Domain Area and ALPA For example port 15 would be equal to 640F00 Domain 0x64 Area Ox0F ALPA 0x00 connUnitPortSn 1 3 6 1 3 94 1 10 1 12 The serial number of the unit If not applicable returns an empty string Syntax DisplayString SIZE 0 79 Access read only Status unsupported Return Value Return Value The media part number of the SFP or MediaPartNumber if installed connUnitPortRevision 1 3 6 1 3 94 1 10 1 13 The port revision For example for a GBIC Syntax DisplayString SIZE 0 79 Access read only Status unsupported Return Value Return Value The media revision of the SFP or MediaRevision if installed 4 36 59
56. protocol governing network management and monitoring of network devices This Simple Network Management Protocol Reference Guide describes how to use SNMP to manage and monitor the QLogic switch products Specifically this guide describes the SNMP agent that resides on the switch The following topics are covered in this section SNMP interface objectives Manager and agent Traps Management information bases MIBs User datagram protocol UDP Numbering system conventions SNMP Interface Objectives The objectives of the SNMP Interface are as follows m Connect to the SNMP agent that resides on the switch using a management workstation m Support of Fabric Element Management Information Bases FE MIB rfc2837 and Fibre Alliance Management Information Bases FA MIB draft Support of version 1 and 2 traps The SNMP agent supports SNMPv1and SNMPv2c Manager and Agent The two primary elements of SNMP are E Manager the application that runs on the management workstation m Agent the daemon application that runs on the switch 59047 10 D 1 1 1 SNMP Overview Traps AA NY The Manager is the application through which the network administrator performs network management functions The SNMP agent is the direct interface on the switch for any SNMP manager connecting to the switch using the SNMP protocol as shown in Figure 1 1 The agent will be started by the script file s responsible for switch initialization wh
57. public fcFxPortC3InFrames 1 1 This table contains one entry for each FxPort in the Fabric Element and Counter32s for certain types of events that have occurred in the FxPorts since the management agent has re initialized fcFxPortC3InFrames 1 3 6 1 2 1 75 1 4 3 1 1 The number of Class 3 frames received by this FxPort from its attached NxPort Syntax Counter32 Access read only Status current Return Value The total number of Class3Framesln received by a port 59047 10 D 5 31 5 Fabric Element MIB Objects fcFxPortC3OutFrames 1 3 6 1 2 1 75 1 4 3 1 2 AA NY fcFxPortC3OutFrames 1 3 6 1 2 1 75 1 4 3 1 2 The number of Class 3 frames delivered through this FxPort to its attached NxPort Syntax Counter32 Access read only Status current Return Value The total number of Class3FramesQut sent by a port fcFxPortC3InOctets 1 3 6 1 2 1 75 1 4 3 1 3 The number of Class 3 frame octets including the frame delimiters received by this FxPort from its attached NxPort Syntax Counter32 Access read only Status current Return Value The total number of Class3WordsOut received by a port fcFxPortC3OutOctets 1 3 6 1 2 1 75 1 4 3 1 4 The number of Class 3 frame octets including the frame delimiters delivered through this FxPort to its attached NxPort Syntax Counter32 Access read only Status current Return Value The total number of Class3WordsOut sent by a port 5 32 59047 10 D 5 Fabric Element MIB Objects fcFxP
58. returns error status NoSuchName fcFxPortC1FbsyFrames 1 3 6 1 2 1 75 1 4 1 1 6 The number of F_BSY frames generated by this FxPort against Class 1 connect request Syntax Counter32 Access read only Status current Return Value Unsupported Always returns error status NoSuchName fcFxPortC1FrjtFrames 1 3 6 1 2 1 75 1 4 1 1 7 The number of F RJT frames generated by this FxPort against Class 1 connect request Syntax Counter32 Access read only Status current Return Value Unsupported Always returns error status NoSuchName 59047 10 D 5 27 5 Fabric Element MIB Objects fcFxPortC1InConnections 1 3 6 1 2 1 75 1 4 1 1 8 SST fcFxPortC1InConnections 1 3 6 1 2 1 75 1 4 1 1 8 The number of Class 1 connections successfully established in which the attached NxPort is the source of the connect request Syntax Counter32 Access read only Status current Return Value Unsupported Always returns error status NoSuchName fcFxPortC1OutConnections 1 3 6 1 2 1 75 1 4 1 1 9 The number of Class 1 connections successfully established in which the attached NxPort is the destination of the connect request Syntax Counter32 Access read only Status current Return Value Unsupported Always returns error status NoSuchName fcFxPortC1ConnTime 1 3 6 1 2 1 75 1 4 1 1 10 The cumulative time that this FxPort has been engaged in Class 1 connection The amount of time is counted from after a connect request has been accep
59. returns high order bit to 1 with all other bits set to zero connUnitPortStatCountAddressErrors 1 3 6 1 3 94 4 5 1 48 Count of frames received with unknown addressing Syntax OCTET STRING SIZE 8 Access read only Status mandatory Return Value The total number of InvalidDestAddr frames received by a port connUnitPortStatCountDelimiterErrors 1 3 6 1 3 94 4 5 1 49 Count of invalid frame delimiters received at this port An example is a frame with a Class 2 start and a Class 3 at the end This is a Fibre Channel only statistic Syntax OCTET STRING SIZE 8 Access read only Status mandatory Return Value Unsupported Always returns high order bit to 1 with all other bits set to zero 4 78 59047 10 D 4 Fibre Alliance MIB Objects connUnitPortStatCountEncodingDisparityErrors 1 3 6 1 3 94 4 5 1 50 A CC connUnitPortStatCountEncodingDisparityErrors 1 3 6 1 3 94 4 5 1 50 Count of disparity errors received at this port This is a Fibre Channel only statistic Syntax OCTET STRING SIZE 8 Access read only Status mandatory Return Value Unsupported Always returns high order bit to 1 with all other bits set to zero 59047 10 D 4 79 4 Fibre Alliance MIB Objects Simple Name Server Table ee Simple Name Server Table The objects described in this section are in a table format indexed by World Wide Name and Index The index represents the table index An example of how to access one of these objects given a WWN of
60. the name server table This is a bit mask where each bit that represents the class of service is set to a value of one if the class is supported Class 1 is bit zero 59047 10 D 4 Fibre Alliance MIB Objects connUnitSnsNodelPAddress 1 3 6 1 3 94 5 2 1 1 7 SES connUnitSnsNodelPAddress 1 3 6 1 3 94 5 2 1 1 7 The IPv6 formatted address of the Node for this entry in the SNS table Syntax OCTET STRING SIZE 16 Access read only Status mandatory Return Value The switch IP address in IPv6 format connUnitSnsProcAssoc 1 3 6 1 3 94 5 2 1 1 8 The process associator for this entry in the SNS table Syntax OCTET STRING SIZE 16 Access read only Status mandatory Return Value Unsupported Always returns error status NoSuchName connUnitSnsFC4Type 1 3 6 1 3 94 5 2 1 1 9 The FC 4 types supported by this entry in the SNS table Syntax OCTET STRING SIZE 32 Access read only Status mandatory Return Value A value indicating the FC 4 Types registered for the device in the name server table This is a 32 byte field with each bit uniquely identifying the FC 4 Type registered as defined in FC GS 3 specification Example SCSI FCP bit 8 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 59047 10 D 4 83 4 Fibre Alliance MIB Objects connUnitSnsPortType 1 3 6 1 3 94 5 2 1 1 10 AA NY connUnitSnsPortType 1 3 6 1 3 94 5 2 1 1 10 The port type of this entry in
61. the principal switch returns yes 3 otherwise returns no 2 4 11 4 Fibre Alliance MIB Objects connUnitNumSensors 1 3 6 1 3 94 1 6 1 14 a AA connUnitNumSensors 1 3 6 1 3 94 1 6 1 14 Number of sensors in the connUnitSensorTable elements If this value is not applicable return unknown Syntax INTEGER Access read only Status mandatory Return Value Returns the number of sensors listed in the connUnitSensorTable QLogic 5200 3 QLogic 5202 6 QLogic 5600 3 QLogic 5602 6 QLogic 9000 Series is dependent on number of blades installed connUnitStatusChangeTime 1 3 6 1 3 94 1 6 1 15 The sysUpTime timestamp in centiseconds at which the last status change occurred Syntax TimeTicks Access read only Status obsolete Return Value This object is obsolete Always returns error status NoSuchName connUnitConfigurationChangeTime 1 3 6 1 3 94 1 6 1 16 The sysUpTime timestamp in centiseconds at which the last configuration change occurred Syntax TimeTicks Access read only Status obsolete Return Value This object is obsolete Always returns error status NoSuchName 4 12 59047 10 D 4 Fibre Alliance MIB Objects connUnitNumRevs 1 3 6 1 3 94 1 6 1 17 EE connUnitNumRevs 1 3 6 1 3 94 1 6 1 17 The number of revisions in the connUnitRevs Table Syntax Access Status Return Value INTEGER read only mandatory The number of entries in the revision table The revision numbers of all com
62. whenever any of the following notifications occur Chassis PsBadAlarm Chassis PsOkAlarm Chassis FanBadAlarm Chassis FanOkAlarm Blade OverheatAlarm Blade OverwarmAlarm Variables connUnitSensorStatus 4 98 59047 10 D 4 Fibre Alliance MIB Objects connUnitPortStatusChange 1 3 6 1 3 94 0 6 TO BRP connUnitPortStatusChange 1 3 6 1 3 94 0 6 coldStart The overall status of the connectivity unit has changed The recommended severity level for filtering is alert Sent whenever a UserPort StateChange or UserPort OperChange event occurs Enterprise fcmgmt Variables connUnitPortStatus connUnitPortState A coldStart trap signifies that the SNMPv2 entity acting in an agent role is re initializing itself and that its configuration may have been altered authenticationFailure 59047 10 D An authenticationFailure trap signifies that the SNMPv2 entity acting in an agent role has received a protocol message that is not properly authenticated While all implementations of the SNMPv2 must be capable of generating this trap the snmpEnableAuthenTraps object indicates whether this trap will be generated 4 99 4 Fibre Alliance MIB Objects authenticationFailure WAA ee 4 100 59047 10 D 5 Fabric Element MIB Objects This section covers the implementation details for the Fabric Element Management Information Bases FE MIB on the QLogic switch Fibre Channel FE MIB Definitions The textual substitu
63. 047 10 D 4 Fibre Alliance MIB Objects connUnitPortVendor 1 3 6 1 3 94 1 10 1 14 Ee connUnitPortVendor 1 3 6 1 3 94 1 10 1 14 The port vendor For example for a GBIC Syntax DisplayString SIZE 0 79 Access read only Status unsupported Return Value The port vendor as reported by the SFP if supported connUnitPortSpeed 1 3 6 1 3 94 1 10 1 15 The speed of the port in kilobytes per second Syntax INTEGER Access read only Status mandatory Return Value The operational speed otherwise returns the administrative speed setting If 1 Gbps returns 106250 If 2 Gbps returns 212500 If 4 Gbps returns 425000 If 10 Gbps returns 1062500 59047 10 D 4 37 4 Fibre Alliance MIB Objects connUnitPortControl 1 3 6 1 3 94 1 10 1 16 ao maki py emetqr q977f rrr connUnitPortControl 1 3 6 1 3 94 1 10 1 16 This object is used to control the addressed connUnit s port 4 38 resetConnUnitPort If the addressed connUnit allows this operation to be performed to this port the addressed port performs a vendor specific reset operation Examples of these operations are the Link Reset protocol the Loop Initialization protocol or a re synchronization occurring between the transceiver in the addressed port to the transceiver that the port is connected to bypassConnUnitPort If the addressed connUnit allows this operation to be performed to this port the addressed port performs a vendor specific bypas
64. 1 4 10 connUnitProxyMaster 1 3 6 1 3 94 1 6 1 12 4 11 connUnitPrincipal 1 3 6 1 3 94 1 6 1 138 4 11 connUnitNumSensors 1 3 6 1 3 94 1 6 1 14 4 12 connUnitStatusChangeTime 1 3 6 1 3 94 1 6 1 15 4 12 connUnitConfigurationChangeTime 1 3 6 1 3 94 1 6 1 16 4 12 ix Reference Guide Simple Network Management Protocol QLogic 3000 5000 9000 Series Fibre Channel Switch connUnitNumRevs 1 3 6 1 3 94 1 6 1 17 4 13 connUnitNumZones 1 3 6 1 3 94 1 6 1 18 4 13 connUnitModuleld 1 3 6 1 3 94 1 6 1 19 4 13 connUnitName 1 3 6 1 3 94 1 6 1 20 4 14 connUnitinfo 1 3 6 1 3 94 1 6 1 21 4 14 connUnitControl 1 3 6 1 3 94 1 6 1 22 4 15 connUnitContact 1 3 6 1 3 94 1 6 1 23 4 16 connUnitLocation 1 3 6 1 3 94 1 6 1 24 4 16 connUnitEventFilter 1 3 6 1 3 94 1 6 1 25 4 17 connUnitNumE vents 1 3 6 1 3 94 1 6 1 26 4 18 connUnitMaxEvents 1 3 6 1 3 94 1 6 1 27 4 18 connUnitEventCurrlD 1 3 6 1 3 94 1 6 1 28 4 18 connUnitFabriclD 1 3 6 1 3 94 1 6 1 29 4 19 connUnitNumLinks 1 3 6 1 3 94 1 6 1 30 4 19 connUnitVendorld 1 3 6 1 3 94 1 6 1 31
65. 1 AA NY fcFxPortID 1 3 6 1 2 1 75 1 2 1 1 1 The address identifier by which this FxPort is identified within the fabric The FxPort may assign its address identifier to its attached NxPort s during Fabric Login Syntax FcAddressld Access read only Status current Return Value The address of each port based on Domain Area and ALPA Example 64 03 00 fcFxPortBbCreditAvailable 1 3 6 1 2 1 75 1 2 1 1 2 The number of buffers currently available for receiving frames from the attached port in the buffer to buffer flow control The value should be less than or equal to fcFxPortBbCredit Syntax Gauge32 Access read only Status Current Return Value Unsupported Always returns error status NoSuchName fcFxPortOperMode 1 3 6 1 2 1 75 1 2 1 1 3 The current operational mode of the FxPort Syntax INTEGER unknown 1 fPort 2 flPort 3 Access read only Status current Return Value Refer to Table 5 3 for fcFxPortOperMode return values 5 12 59047 10 D 5 Fabric Element MIB Objects fcFxPortAdminMode 1 3 6 1 2 1 75 1 2 1 1 4 T o KP Table 5 3 Port Operational Modes Return Value Unknown 1 F Port 2 FL Port 3 fcFxPortAdminMode 1 3 6 1 2 1 75 1 2 1 1 4 The desired operational mode of the FxPort Syntax INTEGER fPort 2 flPort 3 Access read write Status Current Return Value Unsupported Always returns error status NoSuchName 59047 10 D 5 13 5 Fabric Element MIB Objects FxPort P
66. 1 stop 2 Access read write Status mandatory egpAs 1 3 6 1 2 1 8 6 The autonomous system number of this EGP entity Syntax INTEGER Access read only Status mandatory The Transmission Group Based on the transmission media underlying each interface on a system the corresponding portion of the Transmission group is mandatory for that system When Internet standard definitions for managing transmission media are defined the transmission group is used to provide a prefix for the names of those objects Typically such definitions reside in the experimental portion of the MIB until they are proven then as a part of the Internet standardization process the definitions are accordingly elevated and a new object identifier under the transmission group is defined By convention the name assigned is type OBJECT IDENTIFIER transmission number Where type is the symbolic value used for the media in the ifType column of the ifTable object and number is the actual integer value corresponding to the symbol 3 50 59047 10 D 3 MIB II Objects The dot3StatTable eS The dot3StatTable EtherLike MIB dot3StatsIndex 1 3 6 1 2 1 10 7 2 1 1 An index value that uniquely identifies an interface to an ethernet like medium The interface identified by a particular value of this index is the same interface as identified by the same value of iflndex Syntax Interger32 Access read only Status current EtherLike MIB
67. 1 1 1 18 This object is an alias name for the interface as specified by a network manager and provides a non volatile handle for the interface Syntax DisplayString Access read only Status current ifCounterDiscontinuityTime 1 3 6 1 2 1 31 1 1 1 19 The value of sysUpTime on the most recent occasion at which any one or more of this interface s counters suffered a discontinuity The relevant counters are the specific instances associated with this interface of any Counter32 or Counter64 object contained in the ifTable or ifXTable If no such discontinuities have occurred since the last re initialization of the local management subsystem then this object contains a zero value Syntax TimeStamp Access read only Status current 3 64 59047 10 D 3 MIB II Objects iffableLastChange 1 3 6 1 2 1 31 5 a ifTableLastChange 1 3 6 1 2 1 31 5 The value of sysUpTime at the time of the last creation or deletion of an entry in the ifTable If the number of entries has been unchanged since the last re initialization of the local network management subsystem then this object contains a zero value Syntax TimeTicks Access read only Status current 59047 10 D 3 65 3 MIB II Objects iffableLastChange 1 3 6 1 2 1 31 5 AA NN 3 66 59047 10 D 4 Fibre Alliance MIB Objects This section covers the implementation details for the Fibre Alliance Management Information Bases FA MIB version 6 0 on the QLogic switch FA MIB D
68. 1 12 The interval between EGP Hello command retransmissions in hundredths of a second This represents the t1 timer as defined in RFC 904 Syntax INTEGER Access read only Status mandatory egpNeighlntervalPoll 1 3 6 1 2 1 8 5 1 13 The interval between EGP poll command retransmissions in hundredths of a second This represents the t3 timer as defined in RFC 904 Syntax INTEGER Access read only Status mandatory egpNeighMode 1 3 6 1 2 1 8 5 1 14 The polling mode of this EGP entity either passive or active Syntax INTEGER active 1 passive 2 Access read only Status mandatory 59047 10 D 3 49 3 MIB II Objects egpNeighEventTrigger 1 3 6 1 2 1 8 5 1 15 maa egpNeighEventTrigger 1 3 6 1 2 1 8 5 1 15 A control variable used to trigger operator initiated Start and Stop events When read this variable always returns the most recent value that egpNeighEventTrigger was set to If it has not been set since the last initialization of the network management subsystem on the Node it returns a value of stop When set this variable causes a Start or Stop event on the specified neighbor as specified on pages 8 10 of RFC 904 Briefly a Start event causes an Idle peer to begin neighbor acquisition and a non ldle peer to re initiate neighbor acquisition A stop event causes a non ldle peer to return to the Idle state until a Start event occurs either by egpNeighEventTrigger or otherwise Syntax INTEGER start
69. 1 2 1 2 2 1 16 3 10 ifOutUcastPkts 1 3 6 1 2 1 2 2 1 17 3 10 ifOutNUcastPkKts 1 3 6 1 2 1 2 2 1 18 3 10 ifOutDiscards 1 3 6 1 2 1 2 2 1 19 3 10 ifOutErrors 1 3 6 1 2 1 2 2 1 20 3 11 ifOutQLen 1 3 6 1 2 1 2 2 1 21 3 11 ifSpecific 1 3 6 1 2 1 2 2 1 22 3 11 The Address Translation Group 3 12 atlfIndex 1 3 6 1 2 1 3 1 1 1 3 12 atPhysAddress 1 3 6 1 2 1 3 1 1 2 3 13 atNetAddress 1 3 6 1 2 1 3 1 1 3 3 13 TheIPGroup 3 14 ipForwarding 1 3 6 1 2 1 4 1 3 14 ipDefaultTTL 1 3 6 1 2 1 4 2 3 14 ipinReceives 1 3 6 1 2 1 4 3 3 15 iplnHdrErrors 1 3 6 1 2 1 4 4 3 15 ipinAddrErrors 1 3 6 1 2 1 4 5 3 15 ipForwDatagrams 1 3 6 1 2 1 4 6 3 16 ipInUnknownProtos 1 3 6 1 2 1 4 7 3 16 ipInDiscards 1 3 6 1 2 1 4 8 3 16 ipinDelivers 1 3 6 1 2 1 4 9 3 17 ipOutRequests 1 3 6 1 2 1 4 10 3 17 ipOu
70. 1 2 1 8 5 1 7 3 48 egpNeighInErrMsgs 1 3 6 1 2 1 8 5 1 8 3 48 egpNeighOutErrMsgs 1 3 6 1 2 1 8 5 1 9 3 48 egpNeighStateUps 1 3 6 1 2 1 8 5 1 10 3 48 egpNeighStateDowns 1 3 6 1 2 1 8 5 1 11 3 49 egpNeighIntervalHello 1 3 6 1 2 1 8 5 1 12 3 49 egpNeighintervalPoll 1 3 6 1 2 1 8 5 1 13 3 49 egpNeighMode 1 3 6 1 2 1 8 5 1 14 3 49 egpNeighEventTrigger 1 3 6 1 2 1 8 5 1 15 3 50 egpAs 1 3 6 1 2 1 8 6 3 50 The Transmission Group 3 50 The dot3StatTable 3 51 EtherLike MIB dot3StatsIndex 1 3 6 1 2 1 10 7 2 1 1 3 51 59047 10 D vii Reference Guide Simple Network Management Protocol QLogic 3000 5000 9000 Series Fibre Channel Switch ee EtherLike MIB dot3StatsFCSErrors 1 3 6 1 2 1 10 7 2 1 3 3 51 EtherLike MIB dot3StatsInternalMacReceiveErrors 1 3 6 1 2 1 10 7 2 1 16 3 51 EtherLike MIB dot3StatsSymbolErrors 1 3 6 1 2 1 10 7 2 1 18 3 52 The dot3ControlTable 3 52 EtherLike MIB dot3ControlFunctionsSupported 1 3 6 1 2 1 10 7 9 1 1 3 52 Thedot3PauseTable 3 52 EtherLike MIB dot3PauseAdminMode 1 3 6 1 2 1 10 7 10 1 1
71. 1 3 6 1 3 94 1 14 1 1 Unique table index for each alias Valid values are between 1 and connUnitZoningAliasNumAliases Syntax INTEGER 1 2147483647 Access read only Status mandatory Return Value Returns the alias index connUnitZoningAliasMemberlndex 1 3 6 1 3 94 1 14 1 2 Unique table index for each alias member Valid values are between 1 and connUnitZoningAliasNumMembers Syntax INTEGER 1 2147483647 Access read only Status mandatory Return Value Returns the alias member index 59047 10 D 4 59 4 Fibre Alliance MIB Objects connUnitZoningAliasNumAliases 1 3 6 1 3 94 1 14 1 3 ee connUnitZoningAliasNumaAliases 1 3 6 1 3 94 1 14 1 3 The number of aliases defined in this table Syntax INTEGER Access read only Status mandatory Return Value Returns number of aliases defined connUnitZoningAliasName 1 3 6 1 3 94 1 14 1 4 The alias name Syntax DisplayString SIZE 0 79 Access read only Status mandatory Return Value Returns Alias name connUnitZoningAliasNumMembers 1 3 6 1 3 94 1 14 1 5 Number of members in the alias connUnitZoningAliasName Syntax INTEGER Access read only Status mandatory Return Value Returns number of members in a defined Alias zone 4 60 59047 10 D 4 Fibre Alliance MIB Objects connUnitZoningAliasMemberldType 1 3 6 1 3 94 1 14 1 6 TE ESSE connUnitZoningAliasMemberldType 1 3 6 1 3 94 1 14 1 6 Type of alias member ID 1 Port WWN 2 Domain amp Port
72. 100000c0dd0090a7 is snmpget localhost public fomgmt connUnitServiceSet connUnitServiceTables connUnitSnsTable c onnUnitSnsEntry connUnitSnsId 16 0 0 192 221 0 144 167 0 0 0 0 0 0 60 501 4 The Fibre Channel Simple Name Server table contains an entry for each device presently known to this connUnit There will not be any version on this since FC GS3 does not define a version today This table is accessed either directly if the management software has an index value or using GetNexts The value of the indexes are not required to be contiguous Each entry created in this table will be assigned an index This relationship is kept persistent until the entry is removed from the table or the system is reset The total number of entries are defined by the size of the table connUnitSnsMaxEntry 1 3 6 1 3 94 5 1 1 The current number of entries in the table Syntax INTEGER MaxAccess read only Status mandatory Return Value Returns the number of entries registered in the Simple Name Server for all switches 4 80 59047 10 D 4 Fibre Alliance MIB Objects connUnitSnsld 1 3 6 1 3 94 5 2 1 1 1 TE connUnitSnsld 1 3 6 1 3 94 5 2 1 1 1 The connUnitld of the connectivity unit that contains this Name Server table Syntax Access Status Return Value OCTET STRING SIZE 16 read only mandatory Returns the World Wide Name of the switch followed by 8 bytes of zeros For example 10 00 00 CO DD 00 71 C9 00 00 00 00 00 00 00 00
73. 11 The Status Group 5 11 fcFxPortID 1 3 6 1 2 1 75 1 2 1 1 1 5 12 fcFxPortBbCreditAvailable 1 3 6 1 2 1 75 1 2 1 1 2 5 12 fcFxPortOperMode 1 3 6 1 2 1 75 1 2 1 1 3 5 12 fcFxPortAdminMode 1 3 6 1 2 1 75 1 2 1 1 4 5 13 ExPort Physical Level Table 5 14 fcFxPortPhysAdminStatus 1 3 6 1 2 1 75 1 2 21 1 5 14 fcFxPortPhysOperStatus 1 3 6 1 2 1 75 1 2 2 1 2 5 15 fcFxPortPhysLastChange 1 3 6 1 2 1 75 1 2 2 1 3 5 16 fcFxPortPhysRttov 1 3 6 1 2 1 75 1 2 2 1 4 5 16 Ex Port Fabric Login Table 5 16 fcFxPortFcphVersionAgreed 1 3 6 1 2 1 75 1 2 3 1 2 5 17 59047 10 D XV Reference Guide Simple Network Management Protocol QLogic 3000 5000 9000 Series Fibre Channel Switch Basas fcFxPortNxPortBbCredit 1 3 6 1 2 1 75 1 2 3 1 3 5 17 fcFxPortNxPortRxDataFieldSize 1 3 6 1 2 1 75 1 2 3 1 4 S17 fcFxPortCosSuppAgreed 1 3 6 1 2 1 75 1 2 3 1 5 5 18 fcFxPortIntermixSuppAgreed 1 3 6 1 2 1 75 1 2 3 1 6 5 18 fcFxPortStackedConnModeAgreed 1 3 6 1 2 1 75 1 2 3 1 7 5 19 fcFxPortClass2SeqDelivAgreed 1 3 6 1 2 1 75 1 2 3 1 8 5 19 fcFxPortClass3SeqDelivAgreed 1 3 6 1 2 1 75 1 2 3 1 9 5 19 fcFxPortNxPortName 1 3
74. 11 26 The total number of SNMP Get Next PDUs generated by the SNMP protocol entity Syntax Counter Access read only Status mandatory snmpOutSetRequests 1 3 6 1 2 1 11 27 The total number of SNMP Set Request PDUs generated by the SNMP protocol entity Syntax Counter Access read only Status mandatory snmpOutGetResponses 1 3 6 1 2 1 11 28 The total number of SNMP Get Response PDUs generated by the SNMP protocol entity Syntax Counter Access read only Status mandatory 3 60 59047 10 D 3 MIB II Objects snmpOutTraps 1 3 6 1 2 1 11 29 TO oM snmpOutTraps 1 3 6 1 2 1 11 29 The total number of SNMP Trap PDUs generated by the SNMP protocol entity Syntax Counter Access read only Status mandatory snmpEnableAuthenTraps 1 3 6 1 2 1 11 30 Indicates whether the SNMP agent process is permitted to generate authentication failure traps The value of this object overrides any configuration information as such it provides a means whereby all authentication failure traps may be disabled It is strongly recommended that this object be stored in non volatile memory so that it remains constant between re initializations of the network management system Syntax INTEGER enabled 1 disabled 2 Access read write Status mandatory Return Value Read returns enabled 1 if AuthFailureTrap True otherwise disabled 2 Writes not supported The ifXTable ifName 1 3 6 1 2 1 31 1 1 1 1 The textual name of the interf
75. 26 fcFxPortC1OutOctets 5 26 fcFxPortC2Accounting Table 5 29 fcFxPortC2Discards 5 30 fcFxPortC2FbsyFrames 5 31 fcFxPortC2FrjtFrames 5 31 fcFxPortC2InFrames 5 29 fcFxPortC2InOctets 5 30 fcFxPortC2OutFrames 5 29 fcFxPortC2OutOctets 5 30 fcFxPortC3Discards 5 33 fcFxPortC3InFrames 5 31 fcFxPortC3InOctets 5 32 fcFxPortC3OutFrames 5 32 fcFxPortC3OutOctets 5 32 fcFxPortCapBbCreditMax 5 34 fcFxPortCapBbCreditMin 5 34 fcFxPortCapClass2SeqDeliv 5 36 fcFxPortCapClass3SeqDeliv 5 36 fcFxPortCapCos 5 35 fcFxPortCapFcphVersionHigh 5 33 fcFxPortCapFcphVersionLow 5 33 fcFxPortCapHoldTimeMax 5 37 fcFxPortCapHoldTimeMin 5 37 fcFxPortCaplntermix 5 35 fcFxPortCapRxDataFieldSizeMax 5 34 fcFxPortCapRxDataFieldSizeMin 5 35 fcFxPortCapStackedConnMode 5 36 fcFxPortCapTable 5 33 fcFxPortClass2SeqDeliv 5 10 fcFxPortClass2SeqDelivAgreed 5 19 fcFxPortClass3SeqDeliv 5 11 Index 4 fcFxPortClass3SeqDelivAgreed 5 19 fcFxPortConnectedNxPort 5 20 fcFxPortCosSuppAgreed 5 18 fcFxPortCosSupported 5 9 fcFxPortDelimiterErrors 5 23 fcFxPortEdtov 5 9 fcFxPortFcphVersionAgreed 5 17 fcFxPortFcphVersionHigh 5 7 fcFxPortFcphVersionLow 5 8 fcFxPortHoldTime 5 11 fcFxPortID 5 12 fcFxPortIntermixSuppAgreed 5 18 fcFxPortIntermixSupported 5 10 fcFxPortinvalidCrcs 5 23 fcFxPortInvalidTxWords 5 22 fcFxPortLinkFailures 5 21 fcFxPortLinkReseatins 5 24 fcFxPortLinkResetOuts 5 24 fcFxPortName 5 7 fcFxPortNxPortBbCredit 5 17 fcFxPortNxPortName 5 20 fcFxPortNxPortRxDataFieldSize
76. 3 1 5 5 33 Capability Group 5 33 fcFxPortCapFcphVersionHigh 1 3 6 1 2 1 75 1 5 1 1 1 5 33 fcFxPortCapFcphVersionLow 1 3 6 1 2 1 75 1 5 1 1 2 5 33 fcFxPortCapBbCreditMax 1 3 6 1 2 1 75 1 5 1 1 3 5 34 fcFxPortCapBbCreditMin 1 3 6 1 2 1 75 1 5 1 1 4 5 34 fcFxPortCapRxDataFieldSizeMax 1 3 6 1 2 1 75 1 5 1 1 5 5 34 fcFxPortCapRxDataFieldSizeMin 1 3 6 1 2 1 75 1 5 1 1 6 5 35 feFxPortCapCos 1 3 6 1 2 1 75 1 5 1 1 7 5 35 fcFxPortCaplntermix 1 3 6 1 2 1 75 1 5 1 1 8 5 35 fcFxPortCapStackedConnMode 1 3 6 1 2 1 75 1 5 1 1 9 5 36 fcFxPortCapClass2SeqDeliv 1 3 6 1 2 1 75 1 5 1 1 10 5 36 fcFxPortCapClass3SeqDeliv 1 3 6 1 2 1 75 1 5 1 1 11 5 36 fcFxPortCapHoldTimeMaxv 1 3 6 1 2 1 75 1 5 1 1 12 5 37 fcFxPortCapHoldTimeMin 1 3 6 1 2 1 75 1 5 1 1 13 5 37 6 QLOGIC MIB Objects QLOGIC MIB Definitions 6 1 fcQxPortPhysAdminStatus 1 3 6 1 4 1 1663 1 3 10 1 1 3 6 1 fcQxPortPhysOperStatus 1 3 6 1 4 1 1663 1 3 10 1 1 4 6 2 Related Traps 6 3 qiSB2PortLinkDown qLogicExperimental 0 10 6 3 qiSB2PortLinkUp qLogicExperimental 0 11 6 3 qlconnUnitAddedTrap qLogicExperimental 012
77. 40 4 75 connUnitPortStatCountInvalidTxWords 1 3 6 1 3 94 4 5 1 41 4 76 connUnitPortStatCountPrimitiveSequenceProtocolErrors 1 3 6 1 3 944 BAAS as pee ees tae one ade AA e 4 76 connUnitPortStatCountLossofSignal 1 3 6 1 3 94 4 5 1 43 4 76 connUnitPortStatCountLossofSynchronization 1 3 6 1 3 94 4 5 1 44 4 77 connUnitPortStatCountInvalidOrderedSets 1 3 6 1 3 94 4 5 1 45 4 77 connUnitPortStatCountFramesTooLong 1 3 6 1 3 94 4 5 1 46 4 77 connUnitPortStatCountFramesTruncated 1 3 6 1 3 94 4 5 1 47 478 connUnitPortStatCountAddressErrors 1 3 6 1 3 94 4 5 1 48 4 78 connUnitPortStatCountDelimiterErrors 1 3 6 1 3 94 4 5 1 49 4 78 connUnitPortStatCountEncodingDisparityErrors 1 3 6 1 3 94 4 5 1 50 4 79 Simple Name Server Table 4 80 connUnitSnsMaxEntry 1 3 6 1 3 94 5 1 1 4 80 connUnitSnsid 1 3 6 1 3 94 5 2 1 1 1 4 81 connUnitSnsPortIndex 1 3 6 1 3 94 5 2 1 1 2 4 81 connUnitSnsPortldentifier 1 3 6 1 3 94 5 2 1 1 3 4 81 connUnitSnsPortName 1 3 6 1 3 94 5 2 1 1 4 4 82 59047 10 D xiii Reference Guide Simple Network Management Protocol QLogic 3000 5000 9000 Series Fibre Channel Switch ii e connUnitSnsNodeName 1 3 6 1 3 94 5 2 1 1 5 4 82 connUnitSnsClassOfSvc 1 3 6 1 3 94 5 2 1 1 6 4 82 connUnitSnsNodelPAddress
78. 5 17 fcFxPortOlsins 5 24 fcFxPortOlsOuts 5 25 fcFxPortOperMode 5 12 fcFxPortPhysAdminStatus 5 14 FcFxPortPhysEntry 5 14 fcFxPortPhysLastChange 5 16 fcFxPortPhysOperStatus 5 15 6 2 fcFxPortPhysRttov 5 16 fcFxPortPhysTable 5 14 fcFxPortPrimSeqProtoErrors 5 22 fcFxPortRatov 5 9 fcFxPortRxBufSize 5 8 fcFxPortSigLosses 5 22 fcFxPortStackedConnMode 5 10 fcFxPortStackedConnModeAgreed 5 19 fcFxPortSyncLosses 5 21 Fx Port Fabric Login Table 5 16 FxPort Configuration Table 5 7 FxPort Physical Level Table 5 14 59047 10 D Reference Guide Simple Network Management Protocol QLogic 3000 5000 9000 Series Fibre Channel Switch T O KGG G Groups in MIB II 3 1 ICMP Group 3 29 icmpInAddrMaskReps 3 32 icmpInAddrMasks 3 32 icmpInDestUnreachs 3 30 icmpInEchoReps 3 31 icmpInEchos 3 31 icmpInErrors 3 29 icmpInMsgs 3 29 icmpInParmProbs 3 30 icmpInRedirects 3 31 icmpInSrcQuenchs 3 30 icmpInTimeExcds 3 30 icmpInTimestampReps 3 32 icmpInTimestamps 3 31 icmpOutAddrMaskReps 3 35 icmpOutAddrMasks 3 35 icmpOutDestUnreachs 3 33 icmpOutEchoReps 3 34 icmpOutEchos 3 34 icmpOutErrors 3 33 icmpOutMsgs 3 32 icmpOutParmProbs 3 33 icmpOutRedirects 3 34 icmpOutSrcQuenchs 3 34 icmpOutTimeExcds 3 33 icmpOutTimestampReps 3 35 icmpOutTimestamps 3 35 ifAdminStatus 3 7 ifDescr 3 6 iflndex 3 5 ifInDiscards 3 9 ifInErrors 3 9 ifINNUcastPkts 3 9 ifInOctets 3 8 iflInUcastPkts 3 8 ifInUnknownProtos 3 9 ifLastChange 3 8 59047 10 D ifMtu 3 6 if
79. 6 1 2 1 75 1 2 3 1 10 5 20 fcFxPortConnectedNxPort 1 3 6 1 2 1 75 1 2 3 1 11 5 20 fcFxPortBbCreditModel 1 3 6 1 2 1 75 1 2 3 1 12 5 20 The Error Group 5 21 fcFxPortLinkFailures 1 3 6 1 2 11 75 1 3 1 1 1 5 21 fcFxPortSyncLosses 1 3 6 1 2 1 75 1 3 1 1 2 5 21 fcFxPortSigLosses 1 3 6 1 2 1 75 1 3 1 1 3 5 22 fcFxPortPrimSeqProtoErrors 1 3 6 1 2 1 75 1 3 1 1 4 5 22 fcFxPortInvalidTxWords 1 3 6 1 2 1 75 1 3 1 1 5 5 22 fcFxPortlnvalidCrcs 1 3 6 1 2 1 75 1 3 1 1 6 5 23 fcFxPortDelimiterErrors 1 3 6 1 2 1 75 1 3 1 1 7 5 23 fcFxPortAddressldErrors 1 3 6 1 2 1 75 1 3 1 1 8 5 23 fcFxPortLinkResetlns 1 3 6 1 2 1 75 1 3 1 1 9 5 24 fcFxPortLinkResetOuts 1 3 6 1 2 1 75 1 3 1 1 10 5 24 fcFxPortOlsins 1 3 6 1 2 1 75 1 3 1 1 11 5 24 fcFxPortOlsOuts 1 3 6 1 2 1 75 1 3 1 1 12 5 25 Accounting ri AA AA bee east 5 25 Class 1 Accounting Table 5 25 fcFxPortC1InFrames 1 3 6 1 2 1 75 1 4 1 1 1 5 25 fcFxPortC1OutFrames 1 3 6 1 2 1 75 1 4 1 1 2 5 26 fcFxPortC1InOctets 1 3 6 1 2 1 75 1 4 1 1 3 5 26 fcFxPortC1OutOctets 1 3 6 1 2 1 75 1 4 1 1 4 5 26 fcFxPort
80. 8 connUnitPortStatCountClass2RxFrames 1 3 6 1 3 94 4 5 1 20 4 69 connUnitPortStatCountClass2TxFrames 1 3 6 1 3 94 4 5 1 21 4 69 connUnitPortStatCountClass2FBSYFrames 1 3 6 1 3 94 4 5 1 22 4 69 connUnitPortStatCountClass2PBSYFrames 1 3 6 1 3 94 4 5 1 23 4 70 connUnitPortStatCountClass2FRJTFrames 1 3 6 1 3 94 4 5 1 24 4 70 connUnitPortStatCountClass2PRJUTFrames 1 3 6 1 3 94 4 5 1 25 4 70 connUnitPortStatCountClass3RxFrames 1 3 6 1 3 94 4 5 1 26 4 71 connUnitPortStatCountClass3TxFrames 1 3 6 1 3 94 4 5 1 27 4 71 connUnitPortStatCountClass3Discards 1 3 6 1 3 94 4 5 1 28 4 71 connUnitPortStatCountRxMulticastObjects 1 3 6 1 3 94 4 5 1 29 4 72 connUnitPortStatCountTxMulticastObjects 1 3 6 1 3 94 4 5 1 30 4 72 connUnitPortStatCountRxBroadcastObjects 1 3 6 1 3 94 4 5 1 31 4 72 connUnitPortStatCountTxBroadcastObjects 1 3 6 1 3 94 4 5 1 32 4 73 connUnitPortStatCountRxLinkResets 1 3 6 1 3 94 4 5 1 33 4 73 connUnitPortStatCountTxLinkResets 1 3 6 1 3 94 4 5 1 34 4 73 connUnitPortStatCountNumberLinkResets 1 3 6 1 3 94 4 5 1 35 4 74 connUnitPortStatCountRxOfflineSequences 1 3 6 1 3 94 4 5 1 36 4 74 connUnitPortStatCountTxOfflineSequences 1 3 6 1 3 94 4 5 1 37 4 74 connUnitPortStatCountNumberOfflineSequences 1 3 6 1 3 94 4 5 1 38 4 75 connUnitPortStatCountLinkFailures 1 3 6 1 3 94 4 5 1 39 4 75 connUnitPortStatCountInvalidCRC 1 3 6 1 3 94 4 5 1
81. BI bay Cae aes 4 62 connUnitPortStatUnitld 1 3 6 1 3 94 4 5 1 1 4 62 connUnitPortStatIndex 1 3 6 1 3 94 4 5 1 2 4 62 connUnitPortStatCountError 1 3 6 1 3 94 4 5 1 3 4 63 connUnitPortStatCountTxObjects 1 3 6 1 3 94 4 5 1 4 4 63 connUnitPortStatCountRxObjects 1 3 6 1 3 94 4 5 1 5 4 63 connUnitPortStatCountTxElements 1 3 6 1 3 94 4 5 1 6 4 64 connUnitPortStatCountRxElements 1 3 6 1 3 94 4 5 1 7 4 64 connUnitPortStatCountBBCreditZero 1 3 6 1 3 94 4 5 1 8 4 64 connUnitPortStatCountInputBuffersFull 1 3 6 1 3 94 4 5 1 9 4 65 connUnitPortStatCountFBSYFrames 1 3 6 1 3 94 4 5 1 10 4 65 connUnitPortStatCountPBSYFrames 1 3 6 1 3 94 4 5 1 11 4 66 connUnitPortStatCountFRJTFrames 1 3 6 1 3 94 4 5 1 12 4 66 connUnitPortStatCountPRJTFrames 1 3 6 1 3 94 4 5 1 13 4 66 connUnitPortStatCountClass1RxFrames 1 3 6 1 3 94 4 5 1 14 467 connUnitPortStatCountClass1TxFrames 1 3 6 1 3 94 4 5 1 15 467 connUnitPortStatCountClass1FBSYFrames 1 3 6 1 3 94 4 5 1 16 467 connUnitPortStatCountClass1PBSYFrames 1 3 6 1 3 94 4 5 1 17 4 68 connUnitPortStatCountClass1FRJTFrames 1 3 6 1 3 94 4 5 1 18 4 68 59047 10 D Reference Guide Simple Network Management Protocol QLogic 3000 5000 9000 Series Fibre Channel Switch TO CSS connUnitPortStatCountClass1PRJTFrames 1 3 6 1 3 94 4 5 1 19 4 6
82. C1Discards 1 3 6 1 2 1 75 1 4 1 1 5 5 27 fcFxPortC1FbsyFrames 1 3 6 1 2 1 75 1 4 1 1 6 5 27 fcFxPortC1FrjtFrames 1 3 6 1 2 1 75 1 4 1 1 7 5 27 fcFxPortC1InConnections 1 3 6 1 2 1 75 1 4 1 1 8 5 28 fcFxPortC1OutConnections 1 3 6 1 2 1 75 1 4 1 1 9 5 28 fcFxPortC1ConnTime 1 3 6 1 2 1 75 1 4 1 1 10 5 28 Class 2 Accounting Table 5 29 fcFxPortC2InFrames 1 3 6 1 2 1 75 11 4 2 1 1 5 29 fcFxPortC2OutFrames 1 3 6 1 2 1 75 1 4 2 1 2 5 29 fcFxPortC2InOctets 1 3 6 1 2 1 75 1 4 2 1 3 5 30 xvi 59047 10 D Reference Guide Simple Network Management Protocol QLogic 3000 5000 9000 Series Fibre Channel Switch TT a Se fcFxPortC2OutOctets 1 3 6 1 2 1 75 14 2 1 4 5 30 fcFxPortC2Discards 1 3 6 1 2 1 75 1 4 2 1 5 5 30 fcFxPortC2FbsyFrames 1 3 6 1 2 1 75 1 4 2 1 6 5 31 fcFxPortC2FrjtFrames 1 3 6 1 2 1 75 1 4 2 1 7 5 31 Class 3 Accounting Table 5 31 fcFxPortC3InFrames 1 3 6 1 2 1 75 1 4 3 1 1 5 31 fcFxPortC3OutFrames 1 3 6 1 2 1 75 1 4 3 1 2 5 32 fcFxPortC3lnOctets 1 3 6 1 2 1 75 1 4 3 1 3 5 32 fcFxPortC3OutOctets 1 3 6 1 2 1 75 1 4 3 1 4 5 32 fcFxPortC3Discards 1 3 6 1 2 1 75 1 4
83. D 4 Fibre Alliance MIB Objects connUnitPortHWState 1 3 6 1 3 94 1 10 1 23 TO connUnitPortHWState 1 3 6 1 3 94 1 10 1 23 The hardware detected state of the port Syntax INTEGER unknown 1 failed 2 port failed diagnostics bypassed 3 FCAL bypass loop only active 4 connected to a device loopback 5 Port in external loopback txfault 6 Transmitter fault noMedia 7 media not installed linkDown 8 waiting for activity rx sync Access read only Status mandatory Return Value Refer to Table 4 26 for connUnitPortHWState port state return values Table 4 26 ConnUnitPortHWState Port State Return Values Port State Return Value If DiagStatus Failed Failed 2 If SFP Not Installed NoMedia 7 If SyncStatus SyncAcquired Active 4 If SyncStatus SyncLost LinkDown 8 Other Unknown 1 59047 10 D 4 43 4 Fibre Alliance MIB Objects Event Table AA NY Event Table The objects described in this section are in a table format indexed by World Wide Name and Index The maximum index is determined based on the number of events in the table An example of how to access one of these objects given a WWN of 100000c0dd0090a7 is snmpget localhost public fomgmt connSet connUnitEventTable connUnitEventEntry connUnitEvent UnitId 16 0 0 192 221 0 144 167 0 0 0 0 0 0 0 0 1 connUnitEventUnitld 1 3 6 1 3 94 1 11 1 1 The connUnitld of the connectivity unit that c
84. FeFabricName 0 5 2 59047 10 D 5 Fabric Element MIB Objects fcFeFabricName 1 3 6 1 2 1 75 1 1 1 Ng ee fcFeFabricName 1 3 6 1 2 1 75 1 1 1 The Name ldentifier of the Fabric to which this Fabric Element belongs Syntax Access Status Return Value FcNameld read write Current The World Wide Name of the principal switch For example 10 00 00 CO DD 00 71 C2 Writes are not supported fcFeElementName 1 3 6 1 2 1 75 1 1 2 The Name ldentifier of the Fabric Element Syntax FcNameld Access read write Status Current Return Value The World Wide Name of the switch For example 10 00 00 CO DD 00 71 C9 Writes are not supported fcFeModuleCapacity 1 3 6 1 2 1 75 1 1 3 The maximum number of modules in the Fabric Element regardless of their current state Syntax Access Status Return Value 59047 10 D FcFeModuleCapacity read only Current The total number of switches in the fabric if ProxyEnable setting is Enabled on the out of band switch If ProxyEnable setting is disabled on the out of band switch return value 1 5 3 5 Fabric Element MIB Objects Module Table AA NY Module Table The objects described in this section are in table format indexed by switch An example of how to access one of these objects is snmpget localhost public fcFeModuleDescr 1 This table contains one entry for each module fcFeModuleDescr 1 3 6 1 2 1 75 1 1 4 1 2 A textual description of the module
85. GNOME Foundation Corporation Java and Solaris are registered trademarks of Oracle Corporation Linux is a registered trademark of Linus Torvalds Mac OS X and Safari are registered trademarks of Apple Computer Inc Microsoft Windows XP Windows 2003 and Internet Explorer are trademarks of Microsoft Corporation Netscape Navigator and Mozilla are trademarks or registered trademarks of Netscape Communications Corporation Red Hat is aregistered trademark of Red Hat Software Inc SUSE is a trademark of Novell Inc IBM and BladeCenter are registered trademarks for International Business Machines Corporation All other brand and product names are trademarks or registered trademarks of their respective owners Information supplied by QLogic Corporation is believed to be accurate and reliable QLogic Corporation assumes no responsibility for any errors in this publication QLogic Corporation reserves the right without notice to make changes in product design or specifications
86. IP address of 10 32 165 4 is snmpget localhost public fomgmt trapReg trapRegTable trapRegEntry trapRegFilter 10 32 165 4 62 A trap event is reported when the incoming error has a severity level less than or equal to the configured severity level The trap event types and trap severity levels are listed in Table 4 28 Table 4 28 Trap Severity Levels Event Type Severity Level Unknown 1 Emergency Alert Critical Error Warning Notify Info O A NO a A WO DN Debug Mark o 4 92 59047 10 D 4 Fibre Alliance MIB Objects trapMaxClients 1 3 6 1 3 94 2 1 TC CC trapMaxClients 1 3 6 1 3 94 2 1 The maximum number of SNMP trap recipients supported by the connectivity unit Syntax Access Status Return Value INTEGER read only mandatory Always returns 5 trapClientCount 1 3 6 1 3 94 2 2 The current number of rows in the trap table Syntax INTEGER Access read only Status mandatory Return Value A value 1 5 indicating number of configured trap clients trapReglpAddress 1 3 6 1 3 94 2 3 1 1 The IP address of a client registered for traps Syntax IpAddress Access read only Status mandatory Return Value 59047 10 D The IP addresses as defined in the trap table of where to send traps when they occur 4 93 4 Fibre Alliance MIB Objects trapRegPort 1 3 6 1 3 94 2 3 1 2 ee trapRegPort 1 3 6 1 3 94 2 3 1 2 The UDP port to send traps to for this host Norma
87. Index Return Value 1 Active Firmware Image 2 Flasher Shell Version 3 Hardware ASIC Version 1 per blade connUnitRevsDescription 1 3 6 1 3 94 1 7 1 4 Description of a component to which the revision corresponds Syntax DisplayString Access read only Status mandatory Return Value Refer to Table 4 10 for QLogic 5200 5600 Series connUnitRevsDescription return values Table 4 10 QLogic 5200 5600 Series ConnUnitRevsDescription Return Values Table Index Return Value 1 Active Firmware Version 2 Flasher Shell Version 3 Hardware ASIC Version 59047 10 D 4 21 4 Fibre Alliance MIB Objects Sensor Table AA NY Sensor Table The objects described in this section are in a table format indexed by World Wide Name and Index The Index is the sensor number being interrogated There are six sensor items in each switch An example of how to access one of these objects given a WWN of 100000c0dd0090a7 is snmpget localhost public fcmgmt connSet connUnitSensorTable connUnitSensorEntry connUnitSen sorUnitId 16 0 0 192 221 0 144 167 0 0 0 0 0 0 0 0 1 connUnitSensorUnitld 1 3 6 1 3 94 1 8 1 1 The connUnitld of the connectivity unit that contains this sensor table Syntax FeGloballd Access read only Status mandatory Return Value Returns the World Wide Name of the switch followed by 8 bytes of zeros For example 10 00 00 CO DD 00 71 C9 00 00 00 00 00 00 00 00 connUnitSensorIndex 1 3 6 1 3 94 1 8 1 2 A unique value
88. Integer32 Access ReadOnly Status Current Return Value ok 1 alarm 2 59047 10 D 8 1 8 Maintenance Panel Health Check MIB Objects Related Traps E Related Traps The following trap relates the status of the MP health check status when the status changes state qlgcMPStatusChange 1 3 6 1 4 1 3873 3 2 0 1 The status of the maintenance panel eprom monitor changed Variables qlgcMPStatus 8 2 59047 10 D Glossary AL_PA Arbitrated Loop Physical Address Arbitrated Loop A Fibre Channel topology where ports use arbitration to establish a point to point circuit Arbitrated Loop Physical Address AL_PA A unique one byte value assigned during loop initialization to each NL_Port ona Loop Abstract Syntax Notation ASN 1 Abstract Syntax Notation number One ASN 1 is an international standard that specifies data used in communication protocols Authentication Trap Enables or disables the reporting of SNMP authentication failures If enabled a notifi cation trap is sent to the configured trap addresses in the event of an authentica tion failure The default value is False BER Bit Error Rate 59047 10 D Bit Error Rate The probability that a transmitted bit will be erroneously received The BER is measured by counting the number of bits in error at the output of a receiver and dividing by the total number of bits in the transmission BER is typically expressed as a negative power of 10 Buf
89. NMP and QLogic switch configurations Related Materials Refer to your product documentation 59047 10 D Xxi Preface Documentation Conventions ee Documentation Conventions This guide uses the following documentation conventions xxii NOTE provides additional information CAUTION indicates the presence of a hazard that has the potential of causing damage to data or equipment WARNING indicates the presence of a hazard that has the potential of causing personal injury Text in blue font indicates a hyperlink jump to a figure table or section in this guide and links to Web sites are shown in underlined blue For example U Table 9 2 lists problems related to the user interface and remote agent QO See Installation Checklist on page 3 6 U For more information visit www glogic com Text in bold font indicates user interface elements such as a menu items buttons check boxes or column headings For example Q Click the Start button point to Programs point to Accessories and then click Command Prompt QJ Under Notification Options select the Warning Alarms check box Text in Courier font indicates a file name directory path or command line text For example Q TO return to the root directory from anywhere in the file structure Type cd root and press ENTER Q Enter the following command sh install bin Key names and key strokes are indicated with UPPERCASE Q Pre
90. NTEGER unknown 1 other 2 unused 3 shortwave 4 longwave 5 copper 6 scsi 7 longwaveNoOFC 8 shortwaveNoOFC 9 longwaveLED 10 ssa 11 Access read only Status mandatory Return Value Refer to Table 4 22 for connUnitPortTransmitterType return values Table 4 22 ConnUnitPortTransmitterType Return Values SFP Transmitter Type Return Value Not Installed Unused 3 SL Shortwave 4 LL Longwave 5 LC LongwaveNoOFC 8 SN ShortwaveNoOFC 9 EL Copper 6 Other Unknown 1 4 34 59047 10 D 4 Fibre Alliance MIB Objects connUnitPortModuleType 1 3 6 1 3 94 1 10 1 9 T33 ES CC connUnitPortModuleType 1 3 6 1 3 94 1 10 1 9 The module type of the port connector Syntax INTEGER unknown 1 other 2 gbic 3 embedded 4 fixed oneXnine gim 5 gbicSerialld 6 gbicNoSerialld 7 gbicNotInstalled 8 smallFormFactor 9 this is generically a small form factor connector Access read only Status mandatory Return Value Refer to Table 4 23 for connUnitPortModuleType return values Table 4 23 ConnUnitPortModuleType Return Values 1 Gb 2Gb Ports smallFormFactor 9 10 Gb Ports Other 2 connUnitPortWwn 1 3 6 1 3 94 1 10 1 10 The World Wide Name of the port if applicable otherwise returns all zeros Syntax FeGloballd Access read only Status mandatory Return Value Returns the Port World Wide Name followed by 8 bytes of zeros For example the return value for
91. Number 3 5 ifOperStatus 3 8 ifOutDiscards 3 10 ifOutErrors 3 11 ifOutNUcastPkts 3 10 ifOutOctets 3 10 ifOutQLen 3 11 ifOutUcastPkts 3 10 ifPhysAddress 3 7 ifSpecific 3 11 ifSpeed 3 7 ifType 3 6 Info 1 3 4 92 Interfaces Group 3 5 Interfaces Table 3 5 IP Address Table 3 20 IP Address Translation Table 3 27 IP Group 3 14 IP Routing Table 3 22 ipAddrTable 3 20 ipAdEntAddr 3 20 ipAdEntBcastAddr 3 21 ipAdEntlflndex 3 20 ipAdEntNetMask 3 21 ipAdEntReasmMaxSize 3 21 ipDefaultTTL 3 14 ipForwarding 3 14 ipForwDatagrams 3 16 ipFragCreates 3 20 ipFragFails 3 19 ipFragOKs 3 19 ipInAddrErrors 3 15 ipInDelivers 3 17 ipInDiscards 3 16 ipInHdrErrors 3 15 ipInReceives 3 15 ipInUnknownProtos 3 16 ipNetToMedialflndex 3 27 ipNetToMediaNetAddress 3 28 ipNetToMediaPhysAddress 3 27 ipNetToMediaType 3 28 ipOutDiscards 3 17 ipOutNoRoutes 3 18 Index 5 Reference Guide Simple Network Management Protocol QLogic 3000 5000 9000 Series Fibre Channel Switch AA NN ipOutRequests 3 17 ipReasmFails 3 19 ipReasmOKs 3 18 ipReasmReqds 3 18 ipReasmTimeout 3 18 ipRouteAge 3 25 ipRouteDest 3 22 ipRoutelflndex 3 22 ipRoutelnfo 3 26 ipRouteMask 3 26 ipRouteMetric1 3 23 ipRouteMetric2 3 23 ipRouteMetric3 3 23 ipRouteMetric4 3 24 ipRouteMetric5 3 26 ipRouteNextHop 3 24 ipRouteProto 3 25 ipRouteTable 3 22 ipRouteType 3 25 ipRoutingDiscards 3 29 L Link Table 4 48 Management information bases 3 1 Manager 1 1 Mark 4 92 MIB Defini
92. Return Value The event description in the form Id timestamp severity module Description Link Table The objects described in this section are in a table format indexed by World Wide Name and Index The index is an index into the link table for the switch There may be as many link entries as there are ports An example of how to access one of these objects given a WWN of 100000c0dd0090a7 is snmpget localhost public fomgmt connSet connUnitLinkTable connUnitLinkEntry connUnitLinkUni tId 16 0 0 192 221 0 144 167 0 0 0 0 0 0 0 0 1 If the agent is able to discover links which do not directly attach to members of its agency and its discovery algorithm gives some assurance the links are recently valid it may include these links Link information entered by administrative action may be included even if not validated directly if the link has at least one endpoint in this agency but should not be included otherwise A connectivity unit should fill the table in as best it can One of the methods to fill this in would be to use the RNID ELS ANSI document 99 422v0 This allows one to query a port for the information needed for the link table 4 48 59047 10 D 4 Fibre Alliance MIB Objects connUnitLinkUnitld 1 3 6 1 3 94 1 12 1 1 ls This table is accessed either directly if the management software has an index value or via GetNexts The value of the indexes are not required to be contiguous Each entry created in this table wil
93. SNMP PDUs delivered to the SNMP protocol entity and for which the value of the error status field is genErr Syntax Counter Access read only Status mandatory snmpinTotalReqVars 1 3 6 1 2 1 11 13 The total number of MIB objects retrieved successfully by the SNMP protocol entity as the result of receiving valid SNMP Get Request and Get Next PDUs Syntax Counter Access read only Status mandatory snmplnTotalSetVars 1 3 6 1 2 1 11 14 The total number of MIB objects altered successfully by the SNMP protocol entity as the result of receiving valid SNMP Set Request PDUs Syntax Counter Access read only Status mandatory snmpInGetRequests 1 3 6 1 2 1 11 15 The total number of SNMP Get Request PDUs accepted and processed by the SNMP protocol entity Syntax Counter Access read only Status mandatory 59047 10 D 3 57 3 MIB II Objects snmpInGetNexts 1 3 6 1 2 1 11 16 E snmpInGetNexts 1 3 6 1 2 1 11 16 The total number of SNMP Get Next PDUs accepted and processed by the SNMP protocol entity Syntax Counter Access read only Status mandatory snmpInSetRequests 1 3 6 1 2 1 11 17 The total number of SNMP Set Request PDUs accepted and processed by the SNMP protocol entity Syntax Counter Access read only Status mandatory snmpInGetResponses 1 3 6 1 2 1 11 18 The total number of SNMP Get Response PDUs accepted and processed by the SNMP protocol entity Syntax Counter Access read only Status man
94. STRING SIZE 8 Access read only Status mandatory Return Value A hexidecimal number indicating the total number of Frame Rejects on a port connUnitPortStatCountPRJTFrames 1 3 6 1 3 94 4 5 1 13 Count of times that FRJT was returned to this port as a result of a frame that was rejected at the destination N_ Port This is the total for all classes and is a Fibre Channel only statistic Syntax OCTET STRING SIZE 8 Access read only Status mandatory Return Value Unsupported Always returns high order bit to 1 with all other bits set to zero 4 66 59047 10 D 4 Fibre Alliance MIB Objects connUnitPortStatCountClass1RxFrames 1 3 6 1 3 94 4 5 1 14 TO M connUnitPortStatCountClass1RxFrames 1 3 6 1 3 94 4 5 1 14 Count of Class 1 frames received at this port This is a Fibre Channel only statistic Syntax OCTET STRING SIZE 8 Access read only Status mandatory Return Value Unsupported Always returns high order bit to 1 with all other bits set to zero connUnitPortStatCountClass1TxFrames 1 3 6 1 3 94 4 5 1 15 Count of Class 1 frames transmitted out this port This is a Fibre Channel only statistic Syntax OCTET STRING SIZE 8 Access read only Status mandatory Return Value Unsupported Always returns high order bit to 1 with all other bits set to zero connUnitPortStatCountClass1FBSYFrames 1 3 6 1 3 94 4 5 1 16 Count of times that FBSY was returned to this port as a result of a Class 1 frame that could not be
95. The interface identified by a particular value of this index is the same interface as identified by the same value of iflndex Syntax INTEGER Access read only Status mandatory 3 20 59047 10 D 3 MIB II Objects ipAdEntNetMask 1 3 6 1 2 1 4 20 1 3 T359 NG GTA ipAdEntNetMask 1 3 6 1 2 1 4 20 1 3 The subnet mask associated with the IP address of this entry The value of the mask is an IP address with all the network bits set to 1 and all the hosts bits set to 0 Syntax IpAddress Access read only Status mandatory ipAdEntBcastAddr 1 3 6 1 2 1 4 20 1 4 The value of the least significant bit in the IP broadcast address used for sending datagrams on the logical interface associated with the IP address of this entry For example when the Internet standard all ones broadcast address is used the value will be 1 This value applies to both the subnet and network broadcasts addresses used by the entity on this logical interface Syntax INTEGER Access read only Status mandatory ipAdEntReasmMaxSize 1 3 6 1 2 1 4 20 1 5 The size of the largest IP datagram which this entity can reassemble from incoming IP fragmented datagrams received on this interface Syntax INTEGER 0 65535 Access read only Status mandatory 59047 10 D 3 21 3 MIB II Objects The IP Routing Table WAA ee The IP Routing Table The IP routing table contains an entry for each route presently known to this entity ipRouteDest 1 3 6 1 2 1 4 21 1 1
96. The number of Link Reset Protocols issued by this FxPort to the attached NxPort Syntax Counter32 Access read only Status current Return Value The total number of TxLinkResets sent by a port fcFxPortOlsins 1 3 6 1 2 1 75 1 3 1 1 11 The number of Offline Sequences received by this FxPort Syntax Counter32 Access read only Status current Return Value The total number of RxOfflineSeqs received by a port 5 24 59047 10 D 5 Fabric Element MIB Objects fcFxPortOlsOuts 1 3 6 1 2 1 75 1 3 1 1 12 TO SESS fcFxPortOlsOuts 1 3 6 1 2 1 75 1 3 1 1 12 The number of Offline Sequences issued by this FxPort Syntax Counter32 Access read only Status current Return Value The total number of TxOflineSeqs sent by a port Accounting Groups Each group consists of a table that contains accounting information for the FxPorts in the Fabric Element Class 1 Accounting Group Class 2 Accounting Group and Class 3 Accounting Group Class 1 Accounting Table The objects described in this section are in table format indexed by switch index and port index An example of how to access one of these objects is snmpget localhost public fcFxPortC1InFrames 1 1 This table contains one entry for each FxPort in the Fabric Element and Counter32s for certain types of events that have occurred in the FxPorts since the management agent was re initialized fcFxPortC1InFrames 1 3 6 1 2 1 75 1 4 1 1 1 The number of Class 1 frames other than Class 1 co
97. Type 4 7 connUnitUpTime 4 10 connUnitUrl 4 10 Critical 1 3 4 92 D Debug 1 3 4 92 E EGP Group 3 45 59047 10 D EGP Neighbor Table 3 46 egpAs 3 50 egpInErrors 3 45 egpInMsgs 3 45 egpNeighAdar 3 46 egpNeighAs 3 47 egpNeighEventTrigger 3 50 egpNeighInErrMsgs 3 48 egpNeighInErrs 3 47 egpNeighInMsgs 3 47 egpNeighIntervalHello 3 49 egpNeighIntervalPoll 3 49 egpNeighMode 3 49 egpNeighOutErrMsgs 3 48 egpNeighOutErrs 3 48 egpNeighOutMsgs 3 47 egpNeighState 3 46 egpNeighStateDowns 3 49 egpNeighStateUps 3 48 egpNeighTable 3 46 egpOutErrors 3 46 egpOutMsgs 3 45 Emergency 1 3 4 92 Enterprise 2 6 Enterprise Fabric Manager 2 6 Error 1 3 4 92 Error Group 5 21 Event Table 4 44 F fcFeElementName 5 3 fcFeFabricName 5 3 fcFeModuleCapacity 5 3 fcFeModuleDescr 5 4 fcFeModuleFxPortCapacity 5 6 fcFeModuleLastChange 5 6 fcFeModuleName 5 6 fcFeModuleObjectID 5 4 fcFeModuleOperStatus 5 5 fcFeModuleTable 5 4 fcFxPortAddressldErrors 5 23 fcFxPortAdminMode 5 13 Index 3 Reference Guide Simple Network Management Protocol QLogic 3000 5000 9000 Series Fibre Channel Switch EEEE fcFxPortBbCredit 5 8 fcFxPortBbCreditAvailable 5 12 fcFxPortBbCreditModel 5 20 fcFxPortC1 Accounting Table 5 25 fcFxPortC1ConnTime 5 28 fcFxPortC1 Discards 5 27 fcFxPortC1FbsyFrames 5 27 fcFxPortC1FrjtFrames 5 27 fcFxPortC1InConnections 5 28 fcFxPortC1InFrames 5 25 fcFxPortC1InOctets 5 26 fcFxPortC1OutConnections 5 28 fcFxPortC1OutFrames 5
98. a zone connUnitZoneMemberldType 1 3 6 1 3 94 1 13 1 10 Type of zone member ID 1 Port WWN 2 Domain amp Port ID 3 FC Address 4 Node WWN 5 Alias Name 6 FF h Vendor specified Syntax INTEGER Access read only Status mandatory Return Value Retrieves the member ID type WWN ee 0x01 Port WWN Domain Port 0x02 Domain 8 Port ID FCaddress 0x03 FC Address other Oxff Vendor specific 59047 10 D 4 57 4 Fibre Alliance MIB Objects connUnitZoneMemberlD 1 3 6 1 3 94 1 13 1 11 AA NY connUnitZoneMemberID 1 3 6 1 3 94 1 13 1 11 ID of the zone member based on connUnitZoneMemberldType Syntax FeGloballd Access read only Status mandatory Return Value Returns the zone member name as a 16 8 bit octets Mapped as follows WWN member WWN 8 bytes followed by 8 bytes of zeros FC address FC address 3 bytes followed by 13 bytes of zeros Domain Port Domain Port address 2 bytes followed by 14 bytes of zeros 4 58 59047 10 D 4 Fibre Alliance MIB Objects Zoning Alias Table a Zoning Alias Table The objects described in this section are in a table format indexed by Alias Number and Index The aliases are numbered 1 to connUnitZoningAliasNumAliases the index represents the members within the alias An example of how to access one of these objects fcmgmt connSet connUnitZoneTable connUnitZoneEntry connUnitZoningAliasin dex 1 1 connUnitZoningAliasindex
99. able the event is assigned the next higher integer value than the last item entered into the table If the index value reaches its maximum value the next item entered will cause the index value to roll over and start at one again Syntax INTEGER 1 2147483647 Access read only Status mandatory Return Value The table index 59047 10 D 4 45 4 Fibre Alliance MIB Objects connUnitEventld 1 3 6 1 3 94 1 11 1 3 SSS EET connUnitEventld 1 3 6 1 3 94 1 11 1 3 The internal event ID Incremented for each event ranging between 1 and connUnitMaxEvents Not used as table index to simplify the agent implementation When this reaches the end of the range specified by connUnitMaxEvents the ID will roll over to start at one This value will be set back to one at reset The relationship of this value to the index is that internal event ID may represent a smaller number than a 32 bit integer for example maximum 100 entries and would only have a value range up to connUnitMaxEvents Syntax INTEGER Access read only Status deprecated Return Value Unsupported Always returns error status NoSuchName connUnitREventTime 1 3 6 1 3 94 1 11 1 4 The real time when the event occurred It has the following format DDMMYYYY HHMMSS DD day number MM month number YYYY year number HH hour number MM minute number SS seconds number If not applicable return either a NULL string or 00000000 000000 Syntax DisplayString SIZE 0 15
100. ace The value of this object should be the name of the interface as assigned by the local device If there is no local name or this object is otherwise not applicable then this object contains a zero length string Syntax DisplayString Access read only Status current 59047 10 D 3 61 3 MIB II Objects ifinMulticastPkts 1 3 6 1 2 1 31 1 1 1 2 Se ifinMulticastPkts 1 3 6 1 2 1 31 1 1 1 2 The number of packets delivered by this sub layer to a higher sub layer which were addressed to a multicast address at this sub layer For a MAC layer protocol this includes both Group and Functional addresses Syntax Counter32 Access read only Status current ifInBroadcastPkts 1 3 6 1 2 1 31 1 1 1 3 The number of packets delivered by this sub layer to a higher sub layer which were addressed to a broadcast address at this sub layer Syntax Counter32 Access read only Status current ifOutMulticastPkts 1 3 6 1 2 1 31 1 1 1 4 The total number of packets that higher level protocols requested be transmitted and which were addressed to a multicast address at this sub layer including those that were discarded or not sent For a MAC layer protocol this includes both Group and Functional addresses Syntax Counter32 Access read only Status current 3 62 59047 10 D 3 MIB II Objects ifOutBroadcastPkts 1 3 6 1 2 1 31 1 1 1 5 Wo Z777 JC ifOutBroadcastPkts 1 3 6 1 2 1 31 1 1 1 5 The total number of packets that
101. agement Protocol Structure of Management Information A notation for setting or retrieving manage ment variables over SNMP Target A storage device that responds to an initi ator device TCP Transmission Control Protocol Trap Address Specifies the IP address to which SNMP traps are sent The default is 127 0 0 1 A maximum of 5 trap addresses are supported Trap Community Trap Community Authentication A write only field the value on the switch and the SNMP management server must be the same The default value is Public Glossary 4 Trap Port The port number on which the trap is set Trap Severity Specifies a severity level to assign to the trap Trap severity levels include Unknown Emergency Alert Critical Error Warning Notify Info Debug and Mark UDP User Datagram Protocol User Datagram Protocol An Internet protocol that provides connec tion less datagram delivery service to applications Abbreviated UDP UDP over Internet Protocol adds the ability to address multiple endpoints within a single network node to IP VIEnable FC VI When enabled VI preference frames will be transmitted ahead of other frames True False Worldwide Name WWN A unique 64 bit address assigned to a device by the device manufacturer Write Community Write Community Authentication A write only field the value on the switch and the SNMP management server must be the same The default value is Private
102. alue Returns the World Wide Name of the switch followed by 8 bytes of zeros For example 10 00 00 CO DD 00 71 C9 00 00 00 00 00 00 00 00 connUnitPortindex 1 3 6 1 3 94 1 10 1 2 A unique value among all connUnitPortEntrys on this connectivity unit between 1 and connUnitNumPort connUnitPortUnitld Syntax INTEGER 1 2147483647 Access read only Status mandatory Return Value The index for each port on the switch QLogic 5200 5600 Series 1 8 12 16 20 varies depending on number of licensed ports 59047 10 D 4 29 4 Fibre Alliance MIB Objects connUnitPortType 1 3 6 1 3 94 1 10 1 3 AA NY connUnitPortType 1 3 6 1 3 94 1 10 1 3 The port type Syntax INTEGER unknown 1 other 2 not present 3 hub port 4 n port 5 end port for fabric nl port 6 end port for loop fl port 7 public loop f port 8 fabric port e port 9 fabric expansion port g port 10 generic fabric port domain ctl 11 domain controller hub controller 12 scsi 13 parallel SCSI port escon 14 lan 15 wan 16 ac 17 AC power line dc 18 DC power line ssa 19 serial storage architecture wdm 20 optical wave division multiplex ib 21 Infiniband ipstore 22 IP storage Access read only Status mandatory Return Value Refer to Table 4 20 for connUnitPortType return values Table 4 20 ConnUnitPortType Return Values Switch Port Type Return Value G g port 10 FL fl port 7 F f por
103. ation Bases FD MIB on the QLogic switch Firmware Download MIB Definitions The FD MIB enables you to download install and activate new firmware on QLogic switches using the Trivial File Transfer Protocol TFTP The downloaded firmware can be activated using a hot reset non disruptive or a hard reset disruptive A hot reset is a Non Disruptive Code Load Activation NDCLA operation The firmware will be activated the switch will be reset without a Power On Self Test and switch traffic will not be disrupted The switch does not need to be rebooted after the firmware is activated During a hot reset operation fabric services will be unavailable for a short period 30 75 seconds depending on switch model To ensure that the NDCLA operation is successful verify that all administrative changes to the fabric if any are complete When you need to do NDCLA hot reset to multiple switches only perform the NDCLA hot reset on one switch at a time and wait 75 seconds before performing the NDCLA hot reset operation on the next switch A hard reset is a Normal or regular reset operation The firmware will be activated the switch will be reset with a Power On Self Test and switch traffic will be disrupted The switch must be rebooted after the firmware is activated 59047 10 D ZA 7 Firmware Download MIB Objects qlgcChFwOpResult 1 3 6 1 4 1 3873 3 1 1 2 1 SST qlgcChFwOpResult 1 3 6 1 4 1 3873 3 1 1 2 1 The status of the last fir
104. ax INTEGER Access read write Status mandatory Return Value Writes not supported ipRouteMetric3 1 3 6 1 2 1 4 21 1 5 An alternate routing metric for this route The semantics of this metric are determined by the routing protocol specified in the route s ipRouteProto value If this metric is not used its value should be set to 1 Syntax INTEGER Access read write Status mandatory Return Value Writes not supported 59047 10 D 3 23 3 MIB II Objects ipRouteMetric4 1 3 6 1 2 1 4 21 1 6 WAA ipRouteMetric4 1 3 6 1 2 1 4 21 1 6 An alternate routing metric for this route The semantics of this metric are determined by the routing protocol specified in the route s ipRouteProto value If this metric is not used its value should be set to 1 Syntax INTEGER Access read write Status mandatory Return Value Writes not supported ipRouteNextHop 1 3 6 1 2 1 4 21 1 7 The IP address of the next hop of this route In the case of a route bound to an interface which is realized from a broadcast media the value of this field is the agent s IP address on that interface Syntax IpAddress Access read write Status mandatory Return Value Writes not supported 3 24 59047 10 D 3 MIB II Objects ipRouteType 1 3 6 1 2 1 4 21 1 8 TO KG CC ipRouteType 1 3 6 1 2 1 4 21 1 8 The type of route The values direct 3 and indirect 4 refer to the notion of direct and indirect routing in the IP architecture Setting this
105. box is being managed For example if vendor Flintstones Inc was assigned the subtree 1 3 6 1 4 1 4242 it could assign the identifier 1 3 6 1 4 1 4242 1 1 to its Fred Router Syntax OBJECT IDENTIFIER Access read only Status mandatory Return Value The values are QLogic 5200 1 3 6 1 4 1 1663 1 1 1 1 17 QLogic 5202 1 3 6 1 4 1 1663 1 1 1 1 30 QLogic 5600 1 3 6 1 4 1 1663 1 1 1 1 23 and QLogic 5602 1 3 6 1 4 1 1663 1 1 1 1 24 3 2 59047 10 D 3 MIB II Objects sysUpTime 1 3 6 1 2 1 1 3 ey sysUpTime 1 3 6 1 2 1 1 3 The time in hundredths of a second since the network management portion of the system was last re initialized Syntax TimeTicks Access read only Status mandatory Return Value The time since the switch was powered on or last reset reset hard reset or hot reset was executed For example 3 days 21 hours 5 minutes and 26 84 seconds The value will roll over after approximately 497 days of continuous up time sysContact 1 3 6 1 2 1 1 4 The textual identification of the contact person for this managed Node together with information on how to contact this person Syntax DisplayString SIZE 0 255 Access read write Status mandatory Return Value The default is lt sysContact undefined gt The string size is limited to a maximum of 64 sysName 1 3 6 1 2 1 1 5 An administratively assigned name for this managed Node By convention this is the Node s fully qualified domai
106. c Element MIB Objects fcFxPortFcphVersionLow 1 3 6 1 2 1 75 1 1 5 1 4 SS Se fcFxPortFcphVersionLow 1 3 6 1 2 1 75 1 1 5 1 4 The lowest or earliest version of FC PH that the FxPort is configured to support Syntax FephVersion Access read only Status current Return Value Always returns 9 fcFxPortBbCredit 1 3 6 1 2 1 75 1 1 5 1 5 The total number of receive buffers available for holding Class 1 connect request Class 2 or Class3 frames from the attached NxPort It is for buffer to buffer flow control in the direction from the attached NxPort if applicable to FxPort Syntax FeBbCredit Access read only Status current Return Value The default number of receive buffers for each port unless extended credits are used QLogic 5200 5600 Series 16 fcFxPortRxBufSize 1 3 6 1 2 1 75 1 1 5 1 6 The largest Data Field Size in octets for an FT 1 frame that can be received by the FxPort Syntax FcRxDataFieldSize Access read only Status current Return Value Always returns 2112 0x840 5 8 59047 10 D 5 Fabric Element MIB Objects fcFxPortRatov 1 3 6 1 2 1 75 1 1 5 1 7 T a fcFxPortRatov 1 3 6 1 2 1 75 1 1 5 1 7 The Resource Allocation Timeout Value configured for the FxPort This is used as the timeout value for determining when to reuse an NxPort resource such as a Recovery Qualifier It represents E D TOV plus twice the maximum time that a frame may be delayed within the fabric and still be delivered Refer
107. cess read only Status mandatory tcpRtoMin 1 3 6 1 2 1 6 2 The minimum value permitted by a TCP implementation for the retransmission timeout measured in milliseconds More refined semantics for objects of this type depend upon the algorithm used to determine the retransmission timeout In particular when the timeout algorithm is rsre 3 an object of this type has the semantics of the LBOUND quantity described in RFC 793 Syntax INTEGER Access read only Status mandatory tcpRtoMax 1 3 6 1 2 1 6 3 The maximum value permitted by a TCP implementation for the retransmission timeout measured in milliseconds More refined semantics for objects of this type depend upon the algorithm used to determine the retransmission timeout In particular when the timeout algorithm is rsre 3 an object of this type has the semantics of the UBOUND quantity described in RFC 793 Syntax INTEGER Access read only Status mandatory 3 36 59047 10 D 3 MIB II Objects tcpMaxConn 1 3 6 1 2 1 6 4 EEE tcpMaxConn 1 3 6 1 2 1 6 4 The limit on the total number of TCP connections the entity can support In entities where the maximum number of connections is dynamic this object should contain the value 1 Syntax INTEGER Access read only Status mandatory tcpActiveOpens 1 3 6 1 2 1 6 5 The number of times TCP connections have made a direct transition to the SYN SENT state from the CLOSED state Syntax Counter Access read only Status mandato
108. ch IP address For example http 10 0 0 1 Writes not supported returns NoSuchName connUnitDomainld 1 3 6 1 3 94 1 6 1 11 24 bit Fibre Channel address ID of this connectivity unit right justified with leading zeros if required This should be set to the Fibre Channel address ID or if itis a switch it would be set to the Domain Controller address If this value is not applicable return all bits set to one Syntax Access Status Return Value OCTET STRING SIZE 3 read only mandatory The domain controller address For example FF FC 65 59047 10 D 4 Fibre Alliance MIB Objects connUnitProxyMaster 1 3 6 1 3 94 1 6 1 12 TO 1 connUnitProxyMaster 1 3 6 1 3 94 1 6 1 12 A value of yes means this is the proxy master unit for a set of managed units For example this could be the only unit with a management card in it for a set of units A standalone unit should return yes for this object Syntax Access Status Return Value INTEGER unknown 1 no 2 yes 3 read only mandatory If out of band switch returns yes 3 If in band switch returns no 2 connUnitPrincipal 1 3 6 1 3 94 1 6 1 13 Whether this connectivity unit is the principal unit within the group of fabric elements If this value is not applicable the return is unknown Syntax Access Status Return Value 59047 10 D INTEGER unknown 1 no 2 yes 3 read only mandatory For
109. ch followed by 8 bytes of zeros For example 10 00 00 CO DD 00 71 C9 00 00 00 00 00 00 00 OO 4 6 59047 10 D 4 Fibre Alliance MIB Objects connUnitType 1 3 6 1 3 94 1 6 1 3 TO ULI connUnitType 1 3 6 1 3 94 1 6 1 3 The type of this connectivity unit Syntax FeUnitType Access read only Status mandatory Return Value switch 4 connUnitNumports 1 3 6 1 3 94 1 6 1 4 Number of physical ports in the connectivity unit internal embedded external Syntax INTEGER Access read only Status mandatory Return Value The number of ports on the switch connUnitState 1 3 6 1 3 94 1 6 1 5 The operational state of the switch mapped The overall state of connectivity unit Syntax INTEGER Access read only Status mandatory Return Value Refer to Table 4 2 for switch operational states Table 4 2 Switch Operational States Switch State Return State online online 2 offline offline 3 diagnostics offline 3 59047 10 D 4 7 4 Fibre Alliance MIB Objects connUnitStatus 1 3 6 1 3 94 1 6 1 6 asa Table 4 2 Switch Operational States Continued Switch State Return State other unknown 1 connUnitStatus 1 3 6 1 3 94 1 6 1 6 Overall status of the connectivity unit The goal of this object is to be the single poll point to check the status of the connunit If there is any other component that has warning then this should be set to warning any of these values may occur with any of the ConnUnitState va
110. connUnitEventDescr variable Table 4 30 Filter Trap Levels Trap Type Cause Filter Level connUnitPortStatusChange User port config change eventSeverity_info User port state change eventSeverity_info E Port alarm eventSeverity_critical connUnitDeletedTrap Fabric change and unit eventSeverity_info deleted connUnitStatusChange Switch state change eventSeverity_info Switch reset eventSeverity_critical 59047 10 D 4 97 4 Fibre Alliance MIB Objects connUnitSensorStatusChange 1 3 6 1 3 94 0 5 _ SSS dd Table 4 30 Filter Trap Levels Continued Trap Type Cause Filter Level connUnitSensorStatusChange Power supply bad alarm eventSeverity_critical Power supply OK alarm eventSeverity_critical Fan bad alarm eventSeverity_critical Fan OK alarm eventSeverity_critical Overheat alarm eventSeverity_critical Overwarm alarm eventSeverity_critical Temperature OK alarm eventSeverity_critical connUnitEventTrap SNMP config change eventSeverity_info Switch config change eventSeverity_info System config change eventSeverity_info Topology change eventSeverity_info Zoning change eventSeverity_info Zoning merge failure eventSeverity_critical NameServer change eventSeverity_info Generic alarm eventSeverity_critical Generic event eventSeverity_warning connUnitSensorStatusChange 1 3 6 1 3 94 0 5 The overall status of the connectivity unit has changed The recommended severity level for filtering is alert Sent
111. connUnitPortStatCountTxMulticastObjects 4 72 connUnitPortStatCountTxObjects 4 63 connUnitPortStatCountTxOfflineSequences 4 74 connUnitPortState1 4 32 connUnitPortStatIndex 4 62 connUnitPortStatObject 4 41 connUnitPortStatUnitld 4 62 connUnitPortStatus 4 33 connUnitPortTransmitterType 4 34 connUnitPortType 4 30 connUnitPortUnitld 4 29 connUnitPortWwn 4 35 connUnitPrincipal 4 11 connUnitProduct 4 9 connUnitProxyMaster 4 11 connUnitREventTime 4 46 connUnitRevsDescription 4 21 connUnitRevsindex 4 20 connUnitRevsRevld 4 21 59047 10 D Reference Guide Simple Network Management Protocol QLogic 3000 5000 9000 Series Fibre Channel Switch T EEE EEE connUnitRevsUnitld 4 20 connUnitSensorCharacteristic 4 28 connUnitSensorlndex 4 22 connUnitSensorlInfo 4 25 connUnitSensorMessage 4 26 connUnitSensorName 4 23 connUnitSensorStatus 4 24 connUnitSensorType 4 27 connUnitSensorUnitld 4 22 connUnitSEventTime 4 47 connUnitSn 4 9 connUnitSnsClassOfSve 4 82 connUnitSnsFabricPortName 4 85 connUnitSnsFC4Type 4 83 connUnitSnsHardAddress 4 85 connUnitSnsld 4 81 connUnitSnsNodelPAddress 4 83 connUnitSnsNodeName 4 82 connUnitSnsPortldentifier 4 81 connUnitSnsPortIndex 4 81 connUnitSnsPortIPAddress 4 84 connUnitSnsPortName 4 82 connUnitSnsPortType 4 84 connUnitSnsProcAssoc 4 83 connUnitSnsSymbolicNodeName 4 86 connUnitSnsSymbolicPortName 4 85 connUnitState 4 7 connUnitStatus 4 8 connUnitStatusChangeTime 4 12 connUnitTableChangeTime 4 5 connUnit
112. d 16 0 0 192 221 0 144 167 0 0 0 0 0 0 0 0 1 The number of entries in this table will be variable depending on which platform is being examined and the number of blades installed SNMP first reports the firmware revision and flasher shell version It then iterates through each of the installed blades reporting the PCB revision and ASIC version connUnitRevsUnitld 1 3 6 1 3 94 1 7 1 1 The connUnitld of the connectivity unit that contains this revision table Syntax FeGloballd Access read only Status mandatory Return Value Returns the World Wide Name of the switch followed by 8 bytes of zeros For example 10 00 00 CO DD 00 71 C9 00 00 00 00 00 00 00 00 connUnitRevsindex 1 3 6 1 3 94 1 7 1 2 A unique value among all connUnitRevsEntrys with the same value of connUnitRevsUnitld in the range between 1 and connUnitNumRevs connUnitRevsUnitld Syntax INTEGER 1 2147483647 Access read only Status mandatory Return Value The revision table index 4 20 59047 10 D 4 Fibre Alliance MIB Objects connUnitRevsRevid 1 3 6 1 3 94 1 7 1 3 T9 GA connUnitRevsRevld 1 3 6 1 3 94 1 7 1 3 A vendor specific string identifying a revision of a component of the connUnit indexed by connUnitRevsUnitld Syntax DisplayString Access read only Status mandatory Return Value Refer to Table 4 9 for QLogic 5000 9000 Series connUnitRevsRevtld return values Table 4 9 QLogic 5000 9000 Series ConnUnitRevsRevid Return Values Table
113. d or deleted in centiseconds Syntax TimeTicks Access read only Status obsolete Return Value The sysUpTime timestamp at which the connUnitTable was updated 59047 10 D 4 5 4 Fibre Alliance MIB Objects Connectivity Table AA NY Connectivity Table The objects described in this section are in a table format indexed by switch World Wide Name An example of how to access one of these objects given a WWN of 100000c0dd0090a7 is snmpget localhost public fcmgmt connSet connUnitTable connUnitEntry connUnitId 16 0 0 192 221 0 144 167 0 0 0 0 0 0 0 0 connUnitld 1 3 6 1 3 94 1 6 1 1 The unique identification for this connectivity unit among those within this proxy domain The value must be unique within the proxy domain because it is the index variable for connUnitTable The value assigned to a given connectivity unit should be persistent across agent and unit resets It should be the same as connUnitGloballd if connUnitGloballd is known and stable Syntax FeGloballd Access read only Status mandatory Return Value The World Wide Name of the switch followed by 8 bytes of zeros For example 10 00 00 CO DD 00 71 C9 00 00 00 00 00 00 00 OO connUnitGloballd 1 3 6 1 3 94 1 6 1 2 An optional global scope identifier for this connectivity unit It must be a WWN for this connectivity unit or 16 octets of value zero Syntax connUnitGloballd Access read only Status mandatory Return Value The World Wide Name of the swit
114. datory snmplintTraps 1 3 6 1 2 1 11 19 The total number of SNMP Trap PDUs accepted and processed by the SNMP protocol entity Syntax Counter Access read only Status mandatory 3 58 59047 10 D 3 MIB II Objects snmpOutTooBigs 1 3 6 1 2 1 11 20 TO GP snmpOutTooBigs 1 3 6 1 2 1 11 20 The total number of SNMP PDUs generated by the SNMP protocol entity and for which the value of the error status field is tooBig Syntax Counter Access read only Status mandatory snmpOutNoSuchNames 1 3 6 1 2 1 11 21 The total number of SNMP PDUs generated by the SNMP protocol entity and for which the value of the error status is NoSuchName Syntax Counter Access read only Status mandatory snmpOutBadValues 1 3 6 1 2 1 11 22 The total number of SNMP PDUs generated by the SNMP protocol entity and for which the value of the error status field is badValue Syntax Counter Access read only Status mandatory snmpOutGenErrs 1 3 6 1 2 1 11 24 The total number of SNMP PDUs generated by the SNMP protocol entity and for which the value of the error status field is genErr Syntax Counter Access read only Status mandatory 59047 10 D 3 59 3 MIB II Objects snmpOutGetRequests 1 3 6 1 2 1 11 25 AA NN snmpOutGetRequests 1 3 6 1 2 1 11 25 The total number of SNMP Get Request PDUs generated by the SNMP protocol entity Syntax Counter Access read only Status mandatory snmpOutGetNexts 1 3 6 1 2 1
115. datory ifInErrors 1 3 6 1 2 1 2 2 1 14 The number of inbound packets that contained errors preventing them from being deliverable to a higher layer protocol Syntax Counter Access read only Status mandatory ifInUnknownProtos 1 3 6 1 2 1 2 2 1 15 The number of packets received from the interface that were discarded because of an unknown or unsupported protocol Syntax Counter Access read only Status mandatory 59047 10 D 3 9 3 MIB II Objects ifOutOctets 1 3 6 1 2 1 2 2 1 16 AA NY ifOutOctets 1 3 6 1 2 1 2 2 1 16 The total number of octets transmitted out of the interface including framing characters Syntax Counter Access read only Status mandatory ifOutUcastPkts 1 3 6 1 2 1 2 2 1 17 The total number of packets that higher level protocols requested be transmitted to a subnetwork unicast address including those that were discarded or not sent Syntax Counter Access read only Status mandatory ifOutNUcastPkts 1 3 6 1 2 1 2 2 1 18 The total number of packets that higher level protocols requested be transmitted to a non unicast subnetwork broadcast or subnetwork multicast address including those that were discarded or not sent Syntax Counter Access read only Status mandatory ifOutDiscards 1 3 6 1 2 1 2 2 1 19 The number of outbound packets that were chosen to be discarded even though no errors had been detected to prevent their being transmitted One possible reason for discarding such a
116. datory ipOutDiscards 1 3 6 1 2 1 4 11 The number of output IP datagrams for which no problem was encountered to prevent their transmission to their destination but which were discarded for example for lack of buffer space This counter would include datagrams counted in ipForwDatagrams if any such packets met this discretionary discard criterion Syntax Counter Access read only Status mandatory 59047 10 D 3 17 3 MIB II Objects ipOutNoRoutes 1 3 6 1 2 1 4 12 SS ne ipOutNoRoutes 1 3 6 1 2 1 4 12 The number of IP datagrams discarded because no route could be found to transmit them to their destination This counter includes any packets counted in ipForwDatagrams which meet this no route criterion This includes any datagrams that a host cannot route because all of its default gateways are down Syntax Counter Access read only Status mandatory ipReasmTimeout 1 3 6 1 2 1 4 13 The maximum number of seconds which received fragments are held while they are awaiting reassembly at this entity Syntax INTEGER Access read only Status mandatory ipReasmReqds 1 3 6 1 2 1 4 14 The number of IP fragments received that needed to be reassembled at this entity Syntax Counter Access read only Status mandatory ipReasmOKs 1 3 6 1 2 1 4 15 The number of IP datagrams successfully reassembled Syntax Counter Access read only Status mandatory 3 18 59047 10 D 3 MIB II Objects ipReasmFails 1 3 6 1 2 1 4 16 TO EP
117. dot3StatsFCSErrors 1 3 6 1 2 1 10 7 2 1 3 A count of frames received on a particular interface that are an integral number of octets in length but do not pass the FCS check This count does not include frames received with frame too long or frame too short error Syntax Counter32 Access read only Status current EtherLike MIB dot3StatsInternalMacReceiveErrors 1 3 6 1 2 1 10 7 2 1 16 A count of frames for which reception on a particular interface fails due to an internal MAC sublayer receive error The precise meaning of the count represented by an instance of this object is implementation specific In particular an instance of this object may represent a count of receive errors on a particular interface that are not otherwise counted Syntax Counter32 Access read only Status current 59047 10 D 3 51 3 MIB II Objects EtherLike MIB dot3StatsSymbolErrors 1 3 6 1 2 1 10 7 2 1 18 SST EtherLike MIB dot3StatsSymbolErrors 1 3 6 1 2 1 10 7 2 1 18 For an interface operating at 10 Gbps the number of times the receiving media is non idle a carrier event for a period of time equal to or greater than minFrameSize and during which there was at least one occurrence of an event that causes an indication of a receive error Syntax Counter32 Access read only Status current The dot3ControlTable EtherLike MIB dot3ControlFunctionsSupported 1 3 6 1 2 1 10 7 9 1 1 A list of the possible MAC Control functions implemented for this inte
118. dress before being compared to the value in the ipRouteDest field Syntax IpAddress Access read write Status mandatory Return Value Writes not supported ipRouteMetric5 1 3 6 1 2 1 4 21 1 12 An alternate routing metric for this route The semantics of this metric are determined by the routing protocol specified in the route s ipRouteProto value If this metric is not used its value should be set to 1 Syntax INTEGER Access read write Status mandatory Return Value Writes not supported ipRoutelnfo 1 3 6 1 2 1 4 21 1 13 A reference to MIB definitions specific to the particular routing protocol which is responsible for this route as determined by the value specified in the route s ipRouteProto value If this information is not present its value should be set to the OBJECT IDENTIFIER 0 O which is a syntactically valid object identifier Any conformant implementation of ASN 1 and BER must be able to generate and recognize this value Syntax OBJECT IDENTIFIER Access read only Status mandatory 3 26 59047 10 D 3 MIB II Objects The IP Address Translation Table Ok The IP Address Translation Table The IP address translation table contain the IpAddress to physical address equivalences Some interfaces do not use translation tables for determining address equivalences for example DDN X 25 has an algorithmic method If all interfaces are of this type then the Address Translation table is empty that is has z
119. ds received at this port This count is part of the Link Error Status Block LESB FC PH 29 8 This is a Fibre Channel only statistic Syntax OCTET STRING SIZE 8 Access read only Status mandatory Return Value The total number of DecodeErrors for a port connUnitPortStatCountPrimitiveSequenceProtocolErrors 1 3 6 1 3 94 4 5 1 42 Count of primitive sequence protocol errors detected at this port This count is part of the Link Error Status Block LESB FC PH 29 8 This is a Fibre Channel only statistic Syntax OCTET STRING SIZE 8 Access read only Status mandatory Return Value The total number of PrimSegErrors for a port connUnitPortStatCountLossofSignal 1 3 6 1 3 94 4 5 1 43 Count of instances of signal loss detected at port This count is part of the Link Error Status Block LESB FC PH 29 8 This is a Fibre Channel only statistic Syntax OCTET STRING SIZE 8 Access read only Status mandatory Return Value Unsupported Always returns high order bit to 1 with all other bits set to zero 4 76 59047 10 D 4 Fibre Alliance MIB Objects connUnitPortStatCountLossofSynchronization 1 3 6 1 3 94 4 5 1 44 B5 B8 WG TC connUnitPortStatCountLossofSynchronization 1 3 6 1 3 94 4 5 1 44 Count of instances of synchronization loss detected at port This count is part of the Link Error Status Block LESB FC PH 29 8 This is a Fibre Channel only statistic Syntax OCTET STRING SIZE 8 Access read
120. ead only Status mandatory Return Value The total number of RxLinkResets received by a port connUnitPortStatCountTxLinkResets 1 3 6 1 3 94 4 5 1 34 Count of link resets The number of LRs transmitted This is a Fibre Channel only statistic Syntax OCTET STRING SIZE 8 Access read only Status mandatory Return Value The total number of TxLinkResets transmitted by a port 59047 10 D 4 73 4 Fibre Alliance MIB Objects connUnitPortStatCountNumberLinkResets 1 3 6 1 3 94 4 5 1 35 ESS connUnitPortStatCountNumberLinkResets 1 3 6 1 3 94 4 5 1 35 Count of link resets and LIPs detected at this port The number of times the reset link protocol is initiated These are the count of the logical resets and a count of the number of primitives This is a Fibre Channel only statistic Syntax OCTET STRING SIZE 8 Access read only Status mandatory Return Value The total number of TotalLinkResets for a port connUnitPortStatCountRxOfflineSequences 1 3 6 1 3 94 4 5 1 36 Count of offline primitive OLSs received at this port This is a Fibre Channel only statistic Syntax OCTET STRING SIZE 8 Access read only Status mandatory Return Value The total number of RxOfflineSeqs received by a port connUnitPortStatCountTxOfflineSequences 1 3 6 1 3 94 4 5 1 37 Count of offline primitive OLSs transmitted by this port This is a Fibre Channel only statistic Syntax OCTET STRING SIZE 8 Access read only Status mandatory
121. ead write mandatory The symbolic port name A 1G or 2G only capable port would return port followed by the port number 10G ports would return 10G followed by the port number For example a 1G 2G port 2 would return Port2 and a 10G port 18 would return 10G 18 by default connUnitPortPhysicalNumber 1 3 6 1 3 94 1 10 1 18 This is the internal port number this port is known by In many implementations this should be the same as connUnitPortlIndex Some implementations may have an internal port representation not compatible with the rules for table indexes In that case provide the internal representation of this port in this object This value may also be used in the connUnitLinkPortNumberX or connUnitLinkPortNumberY objects of the connUnitLinkTable Syntax Access Status Return Value 4 40 INTEGER read only mandatory The physical port number 59047 10 D 4 Fibre Alliance MIB Objects connUnitPortStatObject 1 3 6 1 3 94 1 10 1 19 ay connUnitPortStatObject 1 3 6 1 3 94 1 10 1 19 This contains the OID of the first object of the table that contains the statistics for this particular port If this has a value of zero then there are no statistics available for this port The port type information will help identify the statistics objects that will be found in the table Syntax OBJECT IDENTIFIER Access read only Status deprecated Return Value The port object ID 1 2 6 1 3 94 4 5 1 1 connUnitPortProtocolCap
122. ects Syntax Counter Access read only Status mandatory icmpOutEchos 1 3 6 1 2 1 5 21 The number of ICMP Echo request messages sent Syntax Counter Access read only Status mandatory icmpOutEchoReps 1 3 6 1 2 1 5 22 The number of ICMP Echo Reply messages sent Syntax Counter Access read only Status mandatory 3 34 59047 10 D 3 MIB II Objects icmpOutTimestamps 1 3 6 1 2 1 5 23 lk icmpOutTimestamps 1 3 6 1 2 1 5 23 The number of ICMP Timestamp request messages sent Syntax Counter Access read only Status mandatory icmpOutTimestampReps 1 3 6 1 2 1 5 24 The number of ICMP Timestamp Reply messages sent Syntax Counter Access read only Status mandatory icmpOutAddrMasks 1 3 6 1 2 1 5 25 The number of ICMP Address Mask Request messages sent Syntax Counter Access read only Status mandatory icmpOutAddrMaskReps 1 3 6 1 2 1 5 26 The number of ICMP Address Mask Reply messages sent Syntax Counter Access read only Status mandatory 59047 10 D 3 35 3 MIB II Objects The TCP Group E The TCP Group Implementation of the TCP group is mandatory for all systems that implement the TCP Instances of object types that represent information about a particular TCP connection are transient they persist only as long as the connection in question tcpRtoAlgorithm 1 3 6 1 2 1 6 1 The algorithm used to determine the timeout value used for retransmitting unacknowledged octets Syntax INTEGER Ac
123. efinitions The FA MIB version 4 0 is a collection of structured objects that resides on the workstation with the manager application These objects define the syntax for information exchanged between the manager and the agent The textual substitutions in Table 4 1 are specific to the FA MIB and can be used in place of primitive data types Table 4 1 FA MIB Textual Substitutions Description Syntax FcNameld OCTET STRING SIZE 8 FeGloballd OCTET STRING SIZE 16 FcAddressld OCTET STRING SIZE 3 FcEventSeverity INTEGER unknown 1 emergency 2 alert 3 critical 4 error 5 warning 6 notify 7 info 8 debug 9 mark 10 All messages logged 59047 10 D 4 1 4 Fibre Alliance MIB Objects FA MIB Definitions SSS Table 4 1 FA MIB Textual Substitutions Continued Description Syntax FcUnitType INTEGER unknown 1 other 2 none of the following hub 3 passive connectivity unit supporting loop protocol switch 4 active connectivity unit supporting multiple protocols gateway 5 unit that converts not only the interface but also encap sulates the frame into another protocol The assumption is that there is always two gateways connected together For example FC lt gt ATM converter 6 unit that converts from one interface to another For example FC lt gt SCSI hba 7 host bus adapter proxy agent 8 software proxy agent storage device 9 d
124. en received by this port One second periodic polling of the port This value is saved and compared with the next polled value to compute net throughput For Fibre Channel ordered sets are not included in the count Syntax OCTET STRING SIZE 8 Access read only Status mandatory Return Value A hexidecimal value indicating the total number of bytes received by a port connUnitPortStatCountBBCreditZero 1 3 6 1 3 94 4 5 1 8 Count of transitions in out of BBcredit zero state The other side is not providing any credit This is a Fibre Channel statistic only Syntax OCTET STRING SIZE 8 Access read only Status mandatory Return Value Unsupported Always returns high order bit to 1 with all other bits set to zero 4 64 59047 10 D 4 Fibre Alliance MIB Objects connUnitPortStatCountInputBuffersFull 1 3 6 1 3 94 4 5 1 9 TO ay connUnitPortStatCountInputBuffersFull 1 3 6 1 3 94 4 5 1 9 Count of occurrences when all input buffers of a port were full and outbound buffer to buffer credit transitioned to zero There is no credit to provide to other side This is a Fibre Channel statistic only Syntax OCTET STRING SIZE 8 Access read only Status mandatory Return Value Unsupported Always returns high order bit to 1 with all other bits set to zero connUnitPortStatCountFBSYFrames 1 3 6 1 3 94 4 5 1 10 Count of times that FBSY was returned to this port as a result of a frame that could not be delivered to the ot
125. en the switch powers up or when the switch is reset When an SNMP request arrives at the agent the agent will compose a message and pass it on to Switch Management to process the message and provide a response to the agent The agent then provides a response to the originator of the SNMP request The SNMP agent does not have direct access to the internal database of the switch q Workstation with SNMP t Manager Application Ca g pp xa Ethernet Connection Switch with Agent and Common User Interface API Figure 1 1 SNMP Interface Architecture Traps Traps are notification messages sent from the switch to a registered manager when a change of state occurs within the switch A change of state can be an alarm condition or simply a configuration change The Fibre Alliance MIB defines a trap table configurable through SNMP A trap table may have up to 5 entries and can be configured using the SNMP Manager or Enterprise Fabric Suite graphical user interface The same trap table information is available to both SNMP Manager and Enterprise Fabric Suite A trap event is reported when the incoming error has a severity level less than or equal to the configured severity level The trap event types and trap severity levels are listed in Table 1 1 Refer to Table 4 1 for information on specific traps 1 2 59047 10 D 1 SNMP Overview Management Information Base aaa Table 1 1 Trap Severity Levels Event Type Severity Level
126. ensorCharacteristic 1 3 6 1 3 94 1 8 1 8 ku i i CC CNNSCNCNCNOCOCSOCOOOOOON connUnitSensorCharacteristic 1 3 6 1 3 94 1 8 1 8 The characteristics being monitored by this sensor Syntax Access Status Return Value INTEGER unknown 1 other 2 temperature 3 pressure 4 emf 5 currentValue 6 current is a keyword airflow 7 frequency 8 power 9 door 10 read only mandatory Refer to Table 4 19 for connUnitSensorCharacterisitic values Table 4 19 ConnUnitSensorCharacteristic Values Sensor Value Temperature Value Temperature 3 Temperature Status Temperature 3 Airflow 7 Power Supply Power 9 4 28 59047 10 D 4 Fibre Alliance MIB Objects Port Table TO SESE Port Table The objects described in this section are in a table format indexed by World Wide Name and Index The Index is the port number being interrogated There may be different numbers of ports in each switch so the agent must determine the maximum allowable index on a switch by switch basis An example of how to access one of these objects given a WWN of 100000c0dd0090a7 is snmpget localhost public fomgmt connSet connUnitPortTable connUnitPortEntry connUnitPortUni t2d 16 0 0 192 221 0 144 167 0 0 0 0 0 0 0 0 1 connUnitPortUnitld 1 3 6 1 3 94 1 10 1 1 The connUnitld of the connectivity unit that contains this port Syntax FeGloballd Access read only Status mandatory Return V
127. er a management agent or a management station In particular it should be observed that the objects below refer to an SNMP entity and there may be several SNMP entities residing on a managed Node snmplInPkts 1 3 6 1 2 1 11 1 The total number of messages delivered to the SNMP entity from the transport service Syntax Counter Access read only Status mandatory snmpOutPkKts 1 3 6 1 2 1 11 2 The total number of SNMP messages passed from the SNMP protocol entity to the transport service Syntax Counter Access read only Status mandatory snmpInBadVersions 1 3 6 1 2 1 11 3 The total number of SNMP messages delivered to the SNMP protocol entity and were for an unsupported SNMP version Syntax Counter Access read only Status mandatory 3 54 59047 10 D 3 MIB II Objects snmpInBadCommunityNames 1 3 6 1 2 1 11 4 EES snmpInBadCommunityNames 1 3 6 1 2 1 11 4 The total number of SNMP messages delivered to the SNMP protocol entity which used a SNMP community name not known to the entity Syntax Counter Access read only Status mandatory snmpInBadCommunityUses 1 3 6 1 2 1 11 5 The total number of SNMP messages delivered to the SNMP protocol entity which represented an SNMP operation which was not allowed by the SNMP community named in the message Syntax Counter Access read only Status mandatory snmpInASNParseErrs 1 3 6 1 2 1 11 6 The total number of ASN 1 or BER errors encountered by the SNMP protocol
128. ero entries ipNetToMedialflndex 1 3 6 1 2 1 4 22 1 1 The interface on which this entry s equivalence is effective The interface identified by a particular value of this index is the same interface as identified by the same value of iflndex Syntax INTEGER Access read write Status mandatory Return Value Writes not supported ipNetToMediaPhysAddress 1 3 6 1 2 1 4 22 1 2 The media dependent physical address Syntax PhysAddress Access read write Status mandatory Return Value Writes not supported 59047 10 D 3 27 3 MIB II Objects ipNetToMediaNetAddress 1 3 6 1 2 1 4 22 1 3 See ipNetToMediaNetAddress 1 3 6 1 2 1 4 22 1 3 The IpAddress corresponding to the media dependent physical address Syntax IpAddress Access read write Status mandatory Return Value Writes not supported ipNetToMediaType 1 3 6 1 2 1 4 22 1 4 The type of mapping Setting this object to the value invalid 2 has the effect of invalidating the corresponding entry in the ipNetToMediaTable That is it effectively disassociates the interface identified with the entry from the mapping identified with the entry It is an implementation specific matter as to whether the agent removes an invalidated entry from the table Accordingly management stations must be prepared to receive tabular information from agents that corresponds to entries not currently in use Proper interpretation of such entries requires examination of the relevant
129. etup snmp trap 5 False 0 0 0 0 162 warning 2 public a to quit True False IPv4 or IPv6 Address 1 65535 select a severity level hostname decimal value 1 unknown 2 emergency 3 alert 6 warning 7 notify 8 info 59047 10 D 2 5 2 Configuring a Switch Configuring a Switch Using Enterprise Fabric Suite AA NY 4 critical 9 debug 5 error 10 mark Trap5Version 1 2 Trap5Community string max 32 chars Do you want to save and activate this snmp setup y n n SNMP setup NEITHER saved NOR activated SB5600 116 50 admin gt Configuring a Switch Using Enterprise Fabric Suite To configure a QLogic switch using Enterprise Fabric Suite use the SNMP Properties Switch Properties and Network Properties dialogs For specific information refer to the Enterprise Fabric Suite User Guide 2 6 59047 10 D 3 MIB II Objects This section covers the implementation details for the MIB II on the QLogic switch A MIB defines the properties of the managed object within the device to be managed Every managed device keeps a database of values for each definition written in the MIB It is not the actual database itself it is implementation dependant Definition of the MIB conforms to the SMI given in RFC 1155 The latest Internet MIB is given in RFC 1213 and is sometimes called MIB II Groups in MIB II Refer the Table 3 1 for the syntax for MIB II Groups Table 3 1 MIB II Groups Gr
130. fer Credit A measure of port buffer capacity equal to one frame Class 2 Service A service that multiplexes frames at frame boundaries to or from one or more N_ Ports wit h acknowledgment provided Class 3 Service A service that multiplexes frames at frame boundaries to or from one or more N_ Ports without acknowledgment Contact Specifies the name of the contact person who is to be contacted to respond to trap events The default is undefined Datagram A message sent between two communi cating entities for which no explicit link level acknowledgement is expected Domain ID User defined name that identifies the switch in the fabric Glossary 1 Reference Guide Simple Network Management Protocol QLogic 3000 5000 9000 Series Fibre Channel Switch AA NN Fabric Management Switch The switch through which the fabric is managed Flash Memory Memory on the switch that contains the chassis control firmware Frame Data unit consisting of a start of frame SOF delimiter header data payload CRC and an end of frame EOF delim iter ICMP Internet Control Message Protocol IETF Internet Engineering Task Force Initiator The device that initiates a data exchange with a target device Internet Engineering Task Force A large open international community of network designers operators vendors and researchers concerned with evolution and smooth operation of the Internet and responsible f
131. frames or packets received at this port Syntax OCTET STRING SIZE 8 Access read only Status mandatory Return Value Unsupported Always returns high order bit to 1 with all other bits set to zero connUnitPortStatCountTxMulticastObjects 1 3 6 1 3 94 4 5 1 30 Count of Multicast frames or packets transmitted out this port Syntax OCTET STRING SIZE 8 Access read only Status mandatory Return Value Unsupported Always returns high order bit to 1 with all other bits set to zero connUnitPortStatCountRxBroadcastObjects 1 3 6 1 3 94 4 5 1 31 Count of Broadcast frames or packets received at this port Syntax OCTET STRING SIZE 8 Access read only Status mandatory Return Value Unsupported Always returns high order bit to 1 with all other bits set to zero 4 72 59047 10 D 4 Fibre Alliance MIB Objects connUnitPortStatCountTxBroadcastObjects 1 3 6 1 3 94 4 5 1 32 connUnitPortStatCountTxBroadcastObjects 1 3 6 1 3 94 4 5 1 32 Count of Broadcast frames or packets transmitted out this port On a Fibre Channel loop count only OPNr frames generated Syntax OCTET STRING SIZE 8 Access read only Status mandatory Return Value Unsupported Always returns high order bit to 1 with all other bits set to zero connUnitPortStatCountRxLinkResets 1 3 6 1 3 94 4 5 1 33 Count of link resets This is the number of LRs received This is a Fibre Channel only statistic Syntax OCTET STRING SIZE 8 Access r
132. gic 5200 SANbox QLogic 5202 SANbox QLogic 5600 SANbox QLogic 5602 SANbox QLogic 9100 SANbox QLogic 9200 SANbox connUnitinfo 1 3 6 1 3 94 1 6 1 21 A display string containing information about this connectivity unit This object value should be persistent between boots Syntax Access Status Return Value 4 14 DisplayString read write mandatory Returns the ConfigDescription field for the switch The default for QLogic 5000 9000 Series Default Config 59047 10 D 4 Fibre Alliance MIB Objects connUnitControl 1 3 6 1 3 94 1 6 1 22 EE connUnitControl 1 3 6 1 3 94 1 6 1 22 This object is used to control the addressed connUnit Cold Start and Warm Start are as defined in MIB II and are not meant to be a factory reset m resetConnUnitColdStart the addressed unit performs a Cold Start reset m resetConnUnitWarmStart the addressed unit performs a Warm Start reset offlineConnUhit the addressed unit puts itself into an implementation dependant offline state In general if a unit is in an offline state it cannot be used to perform meaningful Fibre Channel work m onlineConnLhit the addressed unit puts itself into an implementation dependant online state In general if a unit is in an online state it is capable of performing meaningful Fibre Channel work Each implementation may chose not to allow any or all of these values on a SET Syntax INTEGER
133. he set setup snmp Telnet screen Syntax DisplayString SIZE 0 79 Access read only Status mandatory Return Value Returns the switch SystemDescription QLogic 5200 SANbox 5200 FC Switch QLogic 5202 SANbox 5602 FC Switch QLogic 5600 SANbox 5600 FC Switch QLogic 5602 SANbox 5602 FC Switch QLogic 9100 SANbox 9100 FC Switch QLogic 9200 SANbox 9200 FC Switch connUnitSn 1 3 6 1 3 94 1 6 1 8 The serial number for this connectivity unit Syntax DisplayString SIZE 0 79 Access read only Status mandatory Return Value The chassis serial number 59047 10 D 4 9 4 Fibre Alliance MIB Objects connUnitUpTime 1 3 6 1 3 94 1 6 1 9 SS connUnitUpTime 1 3 6 1 3 94 1 6 1 9 The number of centiseconds since the last unit initialization Syntax Access Status Return Value Time Ticks read only mandatory The time interval since either POST or a reset not including hotreset command for the NDCLA feature POST Power On Self Test occurs during Power On or hardreset connUnitUrl 1 3 6 1 3 94 1 6 1 10 URL to launch a management application if applicable Otherwise it s an empty string In a standalone unit this would be the same as the top level URL This has the same definition as systemURL for keywords If write is not supported then the return value is invalid This value will be retained across boots Syntax Access Status Return Value DisplayString read write mandatory The swit
134. he minimum holding time that the FxPort is capable of supporting in microseconds Syntax MicroSeconds Access read only Status current Return Value 10 OKOA 59047 10 D 5 37 5 Fabric Element MIB Objects fcFxPortCapHoldTimeMin 1 3 6 1 2 1 75 1 5 1 1 13 AA NN 5 38 59047 10 D 6 QLOGIC MB Objects This section covers the implementation details for the QLogic Management Information Bases QLOGIC MIB on the QLogic switch QLOGIC MIB Definitions This MIB replaces the fcFxPortPhysTable module defined in FIBRE CHANNEL FE MIB and defines volatile control objects for ports in a QLogic switch If the switch gets reset these values revert back to the default values in the configuration file fcQxPortPhysAdminStatus 1 3 6 1 4 1 1663 1 3 10 1 1 3 The desired state of the FxPort A management station may place the FxPort ina desired state by setting this object accordingly The testing 3 state indicates that no operational frames can be passed When a Fabric Element initializes all FxPorts start with fcQxPortPhysAdminStatus in the offline 2 state As the result of either explicit management action or per configuration information accessible by the Fabric Element fcQxPortPhysAdminStatus is then changed to either the online 1 or testing 3 states or remains in the offline state Syntax Access Status Return Value 59047 10 D INTEGER online 1 place port online offline 2 take port offline testing 3 init
135. hed NxPort Syntax FeBbCredit Access read only Status current Return Value The default is 255 OxFF fcFxPortCapBbCreditMin 1 3 6 1 2 1 75 1 5 1 1 4 The minimum number of receive buffers available for holding Class 1 connect request Class 2 or Class 3 frames from the attached NxPort Syntax FeBbCredit Access read only Status current Return Value The default is O 0x00 fcFxPortCapRxDataFieldSizeMax 1 3 6 1 2 1 75 1 5 1 1 5 The maximum size in bytes of the Data Field in a frame that the FxPort is capable of receiving from its attached NxPort Syntax FeRxDataFieldSize Access read only Status current Return Value 2112 0x840 5 34 59047 10 D 5 Fabric Element MIB Objects fcFxPortCapRxDataFieldSizeMin 1 3 6 1 2 1 75 1 5 1 1 6 fcFxPortCapRxDataFieldSizeMin 1 3 6 1 2 1 75 1 5 1 1 6 The minimum size in bytes of the Data Field in a frame that the FxPort is capable of receiving from its attached NxPort Syntax FcRxDataFieldSize Access read only Status current Return Value 128 0x80 fcFxPortCapCos 1 3 6 1 2 1 75 1 5 1 1 7 A value indicating the set of classes of service that the FxPort is capable of supporting Syntax FcCosCap Access read only Status current Return Value Always returns Class F 2 and 3 0x0d fcFxPortCaplntermix 1 3 6 1 2 1 75 1 5 1 1 8 A flag indicating whether or not the FxPort is capable of supporting the intermixing of Class 2 and Class 3 frames during a
136. her end of the link This occurs if either the fabric or the destination port is temporarily busy Port can only occur on SOF c1 frames the frames that establish a connection This is a Fibre Channel only statistic This is the sum of all classes If you cannot keep the by class counters then keep the sum counters Syntax OCTET STRING SIZE 8 Access read only Status mandatory Return Value A hexidecimal number indicating the total number of FBusy on a port 59047 10 D 4 65 4 Fibre Alliance MIB Objects connUnitPortStatCountPBSYFrames 1 3 6 1 3 94 4 5 1 11 ii connUnitPortStatCountPBSYFrames 1 3 6 1 3 94 4 5 1 11 Count of times that PBSY was returned to this port as a result of a frame that could not be delivered to the other end of the link This occurs if the destination port is temporarily busy PBSY can only occur on SOFc1 frames the frames that establish a connection This is a Fibre Channel only statistic This is the sum of all classes If you cannot keep the by class counters then keep the sum counters Syntax OCTET STRING SIZE 8 Access read only Status mandatory Return Value Unsupported Always returns high order bit set to 1 with remaining bits set to zero connUnitPortStatCountFRJTFrames 1 3 6 1 3 94 4 5 1 12 Count of times that FRJT was returned to this port as a result of a frame that was rejected by the fabric This is the total for all classes and is a Fibre Channel only statistic Syntax OCTET
137. high order bit is set to 1 with all other bits set to zero The high order bit is reserved to indicate if the object if supported or not All objects start at a value of zero at hardware initialization and continue incrementing until end of 63 bits and then wrap to zero connUnitPortStatUnitld 1 3 6 1 3 94 4 5 1 1 Syntax Access Status A unique value among all entries in this table having the same connUnitPortStatUnitld between 1 and connUnitNumPort connUnitPortStatUnitld FcGloballd read only mandatory Return Value Returns the World Wide Name of the switch followed by 8 bytes of zeros For example 10 00 00 CO DD 00 71 C9 00 00 00 00 00 00 00 00 connUnitPortStatindex 1 3 6 1 3 94 4 5 1 2 Syntax Access Status A unique value among all entries in this table between 0 and connUnitNumPort connUnitPortUnitld INTEGER 0 2147483647 read only mandatory Return Value The port table index 4 62 59047 10 D 4 Fibre Alliance MIB Objects connUnitPortStatCountError 1 3 6 1 3 94 4 5 1 3 TO EELS connUnitPortStatCountError 1 3 6 1 3 94 4 5 1 3 A count of the errors that have occurred on this port Syntax OCTET STRING SIZE 8 Access read only Status mandatory Return Value A hexidecimal value indicating the total number of errors for a port connUnitPortStatCountTxObjects 1 3 6 1 3 94 4 5 1 4 The number of frames packets lOs etc transmitted by this port A Fibre Channel frame starts with SOF a
138. hysical Level Table a o FxPort Physical Level Table The objects described in this section are in table format indexed by switch index and port index An example of how to access one of these objects is snmpget localhost public fcFxPortPhysAdminStatus 1 1 This table contains one entry for each FxPort in the Fabric Element the physical level status and parameters of the FxPorts This table contains one entry for each FxPort in the Fabric Element and the physical level status and parameters of the FxPorts fcFxPortPhysAdminStatus 1 3 6 1 2 1 75 1 2 2 1 1 Syntax Access Status The desired state of the FxPort A management station may place the FxPort ina desired state by setting this object accordingly The testing 3 state indicates that no operational frames can be passed When a Fabric Element initializes all FxPorts start with fcFxPortPhysAdminStatus in the offline 2 state As the result of either explicit management action or per configuration information accessible by the Fabric Element fcFxPortPhysAdminStatus is then changed to either the online 1 or testing 3 states or remains in the offline state INTEGER online 1 place port online offline 2 take port offline testing 3 initiate test procedures read write current Return Value Refer to Table 5 4 for fcFxPortPhysAdminStatus read values Table 5 4 fcFxPortPhysAdminStatus Read Return Values Port Value Online online 1 Offline off
139. iate test procedures read write current Refer to Table 6 1 for fcQxPortPhysAdminStatus read values 6 1 6 QLOGIC MIB Objects fcQxPortPhysOperStatus 1 3 6 1 4 1 1663 1 3 10 1 1 4 AA NY Table 6 1 feQxPortPhysAdminStatus Read Return Values Port Value Online online 1 Offline offline 2 Diagnostics testing 3 Down offline 2 Refer to Table 6 2 for fcQxPortPhysAdminStatus write values Table 6 2 feQxPortPhysAdminStatus Write Values Online online 1 Offline offline 2 Diagnostics testing 3 fcQxPortPhysOperStatus 1 3 6 1 4 1 1663 1 3 10 1 1 4 The current operational status of the FxPort The testing 3 indicates that no operational frames can be passed If fcQxPortPhysAdminStatus is offline 2 then fcQxPortPhysOperStatus should be offline 2 If f QxPortPhysAdminStatus is changed to online 1 then fcQxPortPhysOperStatus should change to online 1 If the FxPort is ready to accept Fabric Login request from the attached NxPort it should proceed and remain in the link failure 4 state if and only if there is a fault that prevents it from going to the online 1 state Syntax INTEGER online 1 Login may proceed offline 2 Login cannot proceed testing 3 port is under test linkFailure 4 failure after online testing Access read only Status current Return Value Refer to Table 6 3 for f QxPortPhysOperStatus return values 6 2 59047 10 D 6 QLOGIC MIB Objects
140. ic Syntax OCTET STRING SIZE 8 Access read only Status mandatory Return Value Unsupported Always returns high order bit to 1 with all other bits set to zero 59047 10 D 4 69 4 Fibre Alliance MIB Objects connUnitPortStatCountClass2PBSYFrames 1 3 6 1 3 94 4 5 1 23 SS ne connUnitPortStatCountClass2PBSYFrames 1 3 6 1 3 94 4 5 1 23 Count of times that PBSY was returned to this port as a result of a Class 2 frame that could not be delivered to the other end of the link This occurs if the destination N Port is temporarily busy PBSY can only occur on SOF c1 frames the frames that establish a connection This is a Fibre Channel only statistic Syntax OCTET STRING SIZE 8 Access read only Status mandatory Return Value Unsupported Always returns high order bit to 1 with all other bits set to zero connUnitPortStatCountClass2FRJTFrames 1 3 6 1 3 94 4 5 1 24 Count of times that FRJT was returned to this port as a result of a Class 2 frame that was rejected by the fabric This is a Fibre Channel only statistic Syntax OCTET STRING SIZE 8 Access read only Status mandatory Return Value Unsupported Always returns high order bit to 1 with all other bits set to zero connUnitPortStatCountClass2PRJTFrames 1 3 6 1 3 94 4 5 1 25 Count of times that FRJT was returned to this port as a result of a Class 2 frame that was rejected at the destination N_Port This is a Fibre Channel only statistic Syntax OCTET STRING SIZE
141. ience xxi Related Materials xxi Documentation Conventions xxii Technical Support xxiii Traing esine a a E SRE AT xxiii Contact Information xxiv KnowledgeBase XXIV 1 SNMP Overview SNMP Interface Objectives 1 1 ManagerandAgent 1 1 AA A E 1 2 Management Information Base 1 3 User Datagram Protocol 1 3 Numbering System Conventions 1 4 2 Configuring a Switch System Specifications and Requirements 2 1 Configuring a Switch Using the Command Line Interface 2 2 Configuring a Switch Using Enterprise Fabric Suite 2 6 3 MIB II Objects Groups in MIB II 3 1 System Gro P ii BANA ape a i p E i kaa ee hues Eae 3 1 sysDescr 1 3 6 1 2 1 1 1 3 2 sysObjectID 1 3 6 1 2 1 1 2 3 2 SvsUp Time 13 60 12 41 8 a maga dak shang eek eee hee asal 3 3 sysContact 1 3 6 1 2 1 1 4 3 3 sysName 1 3 6 1 2 1 1 5
142. ion section in the corresponding QLogic Switch Management User Guide To configure a switch using the command line interface do the following 2 2 59047 10 D 2 Configuring a Switch Configuring a Switch Using the Command Line Interface A M Press ENTER to accept the default value for each parameter SB5600 116 50 admin gt set setup snmp A list of attributes with formatting and current values will follow Enter a new value or simply press the ENTER key to accept the current value If you wish to terminate this process before reaching the end of the attributes for the category being processed press q or Q and the ENTER key to do so If you wish to terminate the configuration process completely press qq or 09 and the ENTER key to do so SNMP System Configuration may optionally use set setup snmp common command Current Values SnmpEnabled True Contact lt sysContact undefined gt Location lt sysLocation undefined gt ReadCommunity public WriteCommunity private AuthFailureTrap False ProxyEnabled True SNMPv3Enabled False New Value press ENTER to not specify value q to quit SnmpEnabled True False Contact string max 64 chars Location string max 64 chars ReadCommunity string max 32 chars WriteCommunity string max 32 chars AuthFailureTrap True False ProxyEnabled True False SNMPv3Enabled True False SNMP Trap 1 Configuration may optionally use set setup snmp trap 1
143. ipNetToMediaType object Syntax INTEGER Access read write Status mandatory Return Value Writes not supported 3 28 59047 10 D 3 MIB II Objects Additional IP Objects Tk Additional IP Objects Following are the additional IP objects ipRoutingDiscards 1 3 6 1 2 1 4 23 The number of routing entries which were chosen to be discarded even though they are valid One possible reason for discarding such an entry could be to free up buffer space for other routing entries Syntax Counter Access read only Status mandatory The ICMP Group Implementation of the ICMP group is mandatory for all systems icmpInMsgs 1 3 6 1 2 1 5 1 The total number of ICMP messages received by the entity This counter includes all those counted by icmpInErrors Syntax Counter Access read only Status mandatory icmpInErrors 1 3 6 1 2 1 5 2 The number of ICMP messages received by the entity but were determined as having ICMP specific errors such as bad ICMP checksums bad length Syntax Counter Access read only Status mandatory 59047 10 D 3 29 3 MIB II Objects icmpInDestUnreachs 1 3 6 1 2 1 5 3 ee icmpInDestUnreachs 1 3 6 1 2 1 5 3 The number of ICMP Destination Unreachable messages received Syntax Counter Access read only Status mandatory icmpInTimeExcds 1 3 6 1 2 1 5 4 The number of ICMP Time Exceeded messages received Syntax Counter Access read only Status mandatory icmpInParmProbs 1 3 6 1 2 1 5 5 The nu
144. isk cd tape etc host 10 host computer storage subsystem 11 raid library etc module 12 subcomponent of a system swdriver 13 software driver storage access device 14 Provides storage management and access for heterogeneous hosts and heterogeneous devices wdm 15 waveform division multiplexer ups 16 uninterruptable power supply 4 2 59047 10 D 4 Fibre Alliance MIB Objects revisionNumber TO SESE a revisionNumber Syntax Access Status The revision number for this MIB The format of the revision value is as follows a 0 high order major revision number m 1 low order major revision number m 2 high order minor revision number a 3 low order minor revision number The value will be stored as an ASCII value The following is the current value of 04 00 for this object 0 O m 1 14 H 2 O 3 O DisplayString SIZE 4 read only mandatory Return Value A four digit ASCII value for example 0400 for MIB revision 4 0 59047 10 D 4 Fibre Alliance MIB Objects Connectivity Unit Group ee Connectivity Unit Group The objects described in this section are not in a table format An example of how to access one of these objects is snmpget localhost public fcmgmt connSet uNumber 0 uNumber 1 3 6 1 3 94 1 1 The number of connectivity units present on this system represented by this agent May be a count of the boards in a chas
145. l be assigned an index This relationship is kept persistent until the entry is removed from the table or the system is reset The total number of entries are defined by the size of the table connUnitLinkUnitld 1 3 6 1 3 94 1 12 1 1 The connUnitld of the connectivity unit that contains this link table Syntax connUnitLinkUnitld Access read only Status mandatory Return Value The World Wide Name of the switch followed by 8 bytes of zeros For example 10 00 00 CO DD 00 71 C9 00 00 00 00 00 00 00 OO connUnitLinkindex 1 3 6 1 3 94 1 12 1 2 This index is used to create a unique value for each entry in the link table with the same connUnitLinkUnitld The value can only be reused if it is not currently in use and the value is the next candidate to be used This value wraps at the highest value represented by the size of INTEGER This value is reset to zero when the system is reset and the first value to be used is one Syntax INTEGER 1 2147483647 Access read only Status mandatory Return Value The table index 59047 10 D 4 49 4 Fibre Alliance MIB Objects connUnitLinkNodeldX 1 3 6 1 3 94 1 12 1 3 ee connUnitLinkNodeldX 1 3 6 1 3 94 1 12 1 3 The Node WWN of the unit at one end of the link If the Node WWN is unknown and the Node is a connUnit in the responding agent then the value of this object must be equal to its connUnitID Syntax OCTET STRING SIZE 16 Access read only Status mandatory Return Value The World
146. line 2 Diagnostics testing 3 Down offline 2 Refer to Table 5 5 for fcFxPortPhysAdminStatus write values 59047 10 D 5 Fabric Element MIB Objects fcFxPortPhysOperStatus 1 3 6 1 2 1 75 1 2 2 1 2 I aa Table 5 5 f FxPortPhysAdminStatus Write Values Online online 1 Offline offline 2 Diagnostics testing 3 fcFxPortPhysOperStatus 1 3 6 1 2 1 75 1 2 2 1 2 The current operational status of the FxPort The testing 3 indicates that no operational frames can be passed If fcFxPortPhysAdminStatus is offline 2 then fcFxPortPhysOperStatus should be offline 2 If fcFxPortPhysAdminStatus is changed to online 1 then fcFxPortPhysOperStatus should change to online 1 If the FxPort is ready to accept Fabric Login request from the attached NxPort it should proceed and remain in the link failure 4 state if and only if there is a fault that prevents it from going to the online 1 state Syntax INTEGER online 1 Login may proceed offline 2 Login cannot proceed testing 3 port is under test linkFailure 4 failure after online testing Access read only Status current Return Value Refer to Table 5 6 for f FxPortPhysOperStatus return values Table 5 6 fcFxPortPHysOperStatus Return Values Status Return Value Online online 1 Offline offline 2 Diagnostic testing 3 Down linkfailure 4 59047 10 D 5 15 5 Fabric Element MIB Objects fcFxPortPhysLastChange 1
147. lly this would be the standard trap port 162 This object is an index and must be specified to create a row in this table Syntax INTEGER 1 2147483647 Access read only Status mandatory Return Value The configured port number of where to send traps when they occur The port number can be configured in the switch SNMP setup parameters Default is 162 trapRegFilter 1 3 6 1 3 94 2 3 1 3 This value defines the trap severity filter for this trap host The connUnit will send traps to this host that have a severity level less than or equal to this value The default value of this object is warning Syntax FcEventSeverity Access read write Status mandatory Return Value A value indicating the trap severity level Refer to Table 4 28 for trap severity levels 4 94 59047 10 D 4 Fibre Alliance MIB Objects trapRegRowState 1 3 6 1 3 94 2 3 1 4 ESE trapRegRowState 1 3 6 1 3 94 2 3 1 4 Specifies the state of the row m rowDestroy Q READ Can never happen Q WRITE Remove this row from the table a rowlnactive Q READ Indicates that this row does exist but that traps are not enabled to be sent to the target Q WRITE If the row does not exist and the agent allows writes to the trap table then a new row is created The values of the optional columns will be set to default values Traps are not enabled to be sent to the target If the row already existed then traps are disabled from being sent to the ta
148. luding those containing only retransmitted octets Syntax Counter Access read only Status mandatory tcpRetransSegs 1 3 6 1 2 1 6 12 The total number of segments retransmitted That is the number of TCP segments transmitted containing one or more previously transmitted octets Syntax Counter Access read only Status mandatory 59047 10 D 3 39 3 MIB II Objects The TCP Connection Table aaa NT The TCP Connection Table The TCP connection table contains information about this entity s existing TCP connections tcpConnState 1 3 6 1 2 1 6 13 1 1 Syntax Access Status The state of this TCP connection The only value which may be set by a management station is deleteTCB 12 Accordingly it is appropriate for an agent to return a badValue response if a management station attempts to set this object to any other value If a management station sets this object to the value deleteTCB 12 then this has the effect of deleting the TCB as defined in RFC 793 of the corresponding connection on the managed Node The result is an immediate termination of the connection INTEGER read write mandatory Return Value Writes not supported tcpConnLocalAddress 1 3 6 1 2 1 6 13 1 2 Syntax Access Status 3 40 The local IP address for this TCP connection In the case of a connection in the listen state which is willing to accept connections for any IP interface associated with the Node the value 0 0 0 0 is used
149. lues Syntax INTEGER Access read only Status mandatory Return Value Refer to Table 4 3 for connectivity unit return values Return value will be OK 3 unless one or more of the following occurs Table 4 3 QLogic 5000 Series Connectivity Unit Return Values Status Return Value If one power supply is reporting Bad warning 4 and or not installed If both power supplies are reporting Bad failed 5 and or not installed If one or more cooling fan failed warning 4 If all cooling fans failed failed 5 If temperature status Warm warning 4 If temperature status Overheating failed 5 If any port down warning 4 If POST failed failed 5 If switch Offline or in Diagnostics mode warning 4 4 8 59047 10 D 4 Fibre Alliance MIB Objects connUnitProduct 1 3 6 1 3 94 1 6 1 7 I aaa Refer to Table 4 4 for connectivity unit return values Return value will be OK 3 uninstalled IO or CPU boards are ignored Table 4 4 QLogic 9000 Series Connectivity Unit Return Values Status Return Value If either FAN or PS boards are not installed warning 4 If all FANs or all PS boards are not failed 5 installed If installed board s faultList is not NONE warning 4 connUnitProduct 1 3 6 1 3 94 1 6 1 7 The sml attribute Config Snmp SysDescr This is the system description shown on the show version Telnet screen It can also be read on the show setup snmp screen and written using t
150. mandatory Return Value The default is 2 The Interfaces Table The Interfaces table contains information on the entity s interfaces Each interface is thought of as being attached to a subnetwork This term should not be confused with subnet which refers to an addressing partitioning scheme used in the Internet suite of protocols ifIndex 1 3 6 1 2 1 2 2 1 1 A unique value for each interface Its value ranges between 1 and the value of ifNumber The value for each interface must remain constant at least from one re initialization of the entity s network management system to the next re initialization The range will be non contiguous Syntax INTEGER Access read only Status mandatory 59047 10 D 3 5 3 MIB II Objects ifDescr 1 3 6 1 2 1 2 2 1 2 SST ifDescr 1 3 6 1 2 1 2 2 1 2 A textual string containing information about the interface This string should include the name of the manufacturer the product name and the version of the hardware interface Syntax DisplayString SIZE 0 255 Access read only Status mandatory ifType 1 3 6 1 2 1 2 2 1 3 The type of interface distinguished according to the physical link protocol s immediately below the network layer in the protocol stack Syntax INTEGER Access read only Status mandatory ifMtu 1 3 6 1 2 1 2 2 1 4 The size of the largest datagram which can be sent received on the interface specified in octets For interfaces that are used for transmi
151. mber of ICMP Parameter Problem messages received Syntax Counter Access read only Status mandatory icmpInSrcQuenchs 1 3 6 1 2 1 5 6 The number of ICMP Source Quench messages received Syntax Counter Access read only Status mandatory 3 30 59047 10 D 3 MIB II Objects icmpInRedirects 1 3 6 1 2 1 5 7 SLES icmpInRedirects 1 3 6 1 2 1 5 7 The number of ICMP Redirect messages received Syntax Counter Access read only Status mandatory icmpInEchos 1 3 6 1 2 1 5 8 The number of ICMP Echo request messages received Syntax Counter Access read only Status mandatory icmpInEchoReps 1 3 6 1 2 1 5 9 The number of ICMP Echo Reply messages received Syntax Counter Access read only Status mandatory icmpInTimestamps 1 3 6 1 2 1 5 10 The number of ICMP Timestamp request messages received Syntax Counter Access read only Status mandatory 59047 10 D ee 3 MIB II Objects icmpInTimestampReps 1 3 6 1 2 1 5 11 E NY icmpInTimestampReps 1 3 6 1 2 1 5 11 The number of ICMP Timestamp Reply messages received Syntax Counter Access read only Status mandatory icmpInAddrMasks 1 3 6 1 2 1 5 12 The number of ICMP Address Mask Request messages received Syntax Counter Access read only Status mandatory icmpInAddrMaskReps 1 3 6 1 2 1 5 13 The number of ICMP Address Mask Reply messages received Syntax Counter Access read only Status mandatory icmpOutMsgs 1 3 6 1 2 1 5 14 The total number of ICMP messages which
152. meExcds 1 3 6 1 2 1 5 4 3 30 icmpinParmProbs 1 3 6 1 2 1 5 5 3 30 icemplnSrcQuenchs 1 3 6 1 2 1 5 6 3 30 icmpInRedirects 1 3 6 1 2 1 5 7 3 31 icmplnEchos 1 3 6 1 2 1 5 8 3 31 icmplnEchoReps 1 3 6 1 2 1 5 9 3 31 icmpinTimestamps 1 3 6 1 2 1 5 10 3 31 icmplnTimestampReps 1 3 6 1 2 1 5 11 3 32 icmpInAddrMasks 1 3 6 1 2 1 5 12 3 32 icmpInAddrMaskReps 1 3 6 1 2 1 5 13 3 32 icmpOutMsgs 1 3 6 1 2 1 5 14 3 32 icmpOutErrors 1 3 6 1 2 1 5 15 3 33 icmpOutDestUnreachs 1 3 6 1 2 1 5 16 3 33 icmpOutTimeExcds 1 3 6 1 2 1 5 17 3 33 icmpOutParmProbs 1 3 6 1 2 1 5 18 3 33 icmpOutSrcQuenchs 1 3 6 1 2 1 5 19 3 34 icmpOutRedirects 1 3 6 1 2 1 5 20 3 34 icmpOutEchos 1 3 6 1 2 1 5 21 3 34 icmpOutEchoReps 1 3 6 1 2 1 5 22 3 34 icmpOutTimestamps 1 3 6 1 2 1 5 23 3 35 icmpOutTimestampReps 1 3 6 1 2 1 5 24 3 35 icmpOutAddrMasks 1 3 6 1 2 1 5 25 3 35 icmpOutAddrMaskReps 1 3 6 1
153. mware download and or installation attempt Syntax OBJECT IDENTIFIER Access read only Status Current Return Value Returns the following DownloadNoError 1 3 6 1 4 1 3873 3 1 1 1 1 1 DownloadHostError 1 3 6 1 4 1 3873 3 1 1 1 1 2 DownloadFileError 1 3 6 1 4 1 3873 3 1 1 1 1 3 InstallNoError 1 3 6 1 4 1 3873 3 1 1 1 2 1 InstallFileError 1 3 6 1 4 1 3873 3 1 1 1 2 2 InstallFileErrorNoAdmin 1 3 6 1 4 1 3873 3 1 1 1 2 3 ResetNoError 1 3 6 1 4 1 3873 3 1 1 1 3 1 ResetNoErr 1 3 6 1 4 1 3873 3 1 1 1 3 2 ResetNoAdmin 1 3 6 1 4 1 3873 3 1 1 1 3 3 qlgcChFwOpRequest 1 3 6 1 4 1 3873 3 1 1 2 2 Starts the operation to download install firmware and or reset the switch Syntax INTEGER 1 auto downloads installs and resets the switch 2 downloadOnly 3 installOnly 4 resetOnly Access read write Status current qlgcChFwDwldHostAddrType 1 3 6 1 4 1 3873 3 1 1 2 3 The type of the IP address from which the firmware file is accessed Syntax INTEGER Access read write Status current 7 2 59047 10 D 7 Firmware Download MIB Objects qlgcChFwDwildHostAddr 1 3 6 1 4 1 3873 3 1 1 2 4 ELE qlgcChFwDwidHostAddr 1 3 6 1 4 1 3873 3 1 1 2 4 The IP address from which the firmware file is accessed Syntax IP ADDRESS Access read write Status current qlgcChFwDwldHostPort 1 3 6 1 4 1 3873 3 1 1 2 5 The port number defaults is 69 used to transfer the firmware file Syntax INTEGER Access read write Stat
154. n This is only meaningful if the ports are using Class 3 service Syntax TruthValue Access read only Status current Return Value Always returns true 1 59047 10 D 5 19 5 Fabric Element MIB Objects fcFxPortNxPortName 1 3 6 1 2 1 75 1 2 3 1 10 AA NY fcFxPortNxPortName 1 3 6 1 2 1 75 1 2 3 1 10 The port name of the attached NxPort Syntax Access Status Return Value FcNameld read only Current Returns the Switch Port s Port World Wide Name for the attached device fcFxPortConnectedNxPort 1 3 6 1 2 1 75 1 2 3 1 11 The address identifier of the destination NxPort with which this FxPort is currently engaged in a either a Class 1 or loop connection If this FxPort is not engaged in a connection then the value of this object is 000000 H Syntax FcAddressld Access read only Status Current Return Value Unsupported fcFxPortBbCreditModel 1 3 6 1 2 1 75 1 2 3 1 12 This object identifies the BB Credit model used by the FxPort Syntax FcBbCreditModel Access read write Status current Return Value 5 20 Returns alternate 2 Writes not supported 59047 10 D 5 Fabric Element MIB Objects The Error Group SEE PC CA The Error Group The objects described in this section are in table format indexed by switch index and port index An example of how to access one of these objects is snmpget localhost public fcFxPortLinkFailures 1 1 This group consists of tables that contain information about the
155. n Value 4 18 The event ID of the last event 59047 10 D 4 Fibre Alliance MIB Objects connUnitFabriclD 1 3 6 1 3 94 1 6 1 29 OS SSS connUnitFabriclD 1 3 6 1 3 94 1 6 1 29 A globally unique value to identify the fabric that this ConnUnit belongs to otherwise empty string This would typically be equal to the connUnitGloballD of the primary switch in a Fibre Channel fabric Syntax FeGloballd MaxAccess read only Status mandatory Return Value Returns the World Wide Name of the principal switch followed by 8 bytes of zeros For example 10 00 00 CO DD 00 71 C9 NO 00 00 00 00 00 00 00 connUnitNumLinks 1 3 6 1 3 94 1 6 1 30 The number of links in the link table Syntax INTEGER MaxAccess read only Status mandatory Return Value Returns the number of link table entries for each switch connUnitVendorld 1 3 6 1 3 94 1 6 1 31 The connectivity unit vendor s name Syntax DisplayString SIZE 0 79 read only Status mandatory Return Value QLogic 59047 10 D 4 19 4 Fibre Alliance MIB Objects Revision Table AA NY Revision Table The objects described in this section are in a table format indexed by World Wide Name and Index The Table of revisions for hardware and software elements There are four revision items in each switch An example of how to access one of these objects given a WWN of 100000c0dd0090a7 is snmpget localhost public fcmgmt connSet connUnitRevsTable connUnitRevsEntry connUnitRevsUni tI
156. n it will be equal to connUnitPortPhysicalNumber Syntax OCTET STRING SIZE 16 Access read only Status mandatory Return Value The remote port number for inter switch link if known Otherwise 1 OxFFFFFFFF connUnitLinkPortWwnY 1 3 6 1 3 94 1 12 1 8 The port WWN on the unit specified by connUnitLinkNodeldY if known otherwise 16 octets of binary O connUnitLinkEntry 8 Syntax FeGloballd Access read only Status mandatory Return Value The remote Port World Wide Name for each entry in the link table if known 59047 10 D 4 51 4 Fibre Alliance MIB Objects connUnitLinkAgentAddressY 1 3 6 1 3 94 1 12 1 9 EE ee connUnitLinkAgentAddressY 1 3 6 1 3 94 1 12 1 9 The address of an FCMGMT MIB agent for the Node identified by connUnitLinkNodeldY if known Otherwise 16 octets of binary 0 connUnitLinkEntry 9 Syntax OCTET STRING SIZE 16 Access read only Status mandatory Return Value The remote IP address of the remote switch if known Otherwise returns sixteen zeroes connUnitLinkAgentAddressTypeY 1 3 6 1 3 94 1 12 1 10 If connUnitLinkAgentAddressY is nonzero it is a protocol address ConnUnitLinkAgentAddressTypeY is the address family number assigned by IANA to identify the address format Syntax INTEGER Access read only Status mandatory Return Value Always returns 1 Ipv4 connUnitLinkAgentPortY 1 3 6 1 3 94 1 12 1 11 The IP port number for the agent This is provided in
157. n name Syntax DisplayString SIZE 0 255 Access read write Status mandatory Return Value The defaults are QLogic 5200 Series SANbox QLogic 5600 Series SANbox 59047 10 D 3 3 3 MIB II Objects sysLocation 1 3 6 1 2 1 1 6 ee sysLocation 1 3 6 1 2 1 1 6 The physical location of this Node such as telephone closet and 3rd floor Syntax DisplayString SIZE 0 255 Access read write Status mandatory Return Value The default is lt sysLocation undefined gt The string size is limited to a maximum of 64 sysServices 1 3 6 1 2 1 1 7 A value that indicates the set of services that this entity primarily offers The value is asum This sum initially takes the value zero Then for each layer L in the range 1 through 7 that this Node performs transactions for 2 raised to L 1 is added to the sum For example a Node that performs primarily routing functions would have a value of 4 24 3 1 In contrast a Node that is a host offering application services would have a value of 72 2 4 1 2 7 1 Syntax INTEGER 0 127 Access read only Status mandatory Return Value The default is 2 3 4 59047 10 D 3 MIB II Objects The Interfaces Group CO AAP The Interfaces Group Implementation of the Interfaces group is mandatory for all systems ifNumber 1 3 6 1 2 1 2 1 The number of network interfaces regardless of their current state present on this system Syntax INTEGER Access read only Status
158. nd ends with EOF Fibre Channel loop devices should not count frames passed through This value represents the sum total for all other Tx objects Syntax OCTET STRING SIZE 8 Access read only Status mandatory Return Value A hexidecimal value indicating the total number of bytes transmitted by a port connUnitPortStatCountRxObjects 1 3 6 1 3 94 4 5 1 5 The number of frames packets lOs etc received by this port A Fibre Channel frame starts with SOF and ends with EOF Fibre Channel loop devices should not count frames passed through This value represents the sum total for all other Rx objects Syntax OCTET STRING SIZE 8 Access read only Status mandatory Return Value A hexidecimal value indicating the total number of bytes received by a port 59047 10 D 4 63 4 Fibre Alliance MIB Objects connUnitPortStatCountTxElements 1 3 6 1 3 94 4 5 1 6 e a connUnitPortStatCountTxElements 1 3 6 1 3 94 4 5 1 6 The number of octets or bytes that have been transmitted by this port One second periodic polling of the port This value is saved and compared with the next polled value to compute net throughput For Fibre Channel ordered sets are not included in the count Syntax OCTET STRING SIZE 8 Access read only Status mandatory Return Value A hexidecimal value indicating the total number of bytes transmitted by a port connUnitPortStatCountRxElements 1 3 6 1 3 94 4 5 1 7 The number of octets or bytes that have be
159. never a TTL value is not supplied by the transport layer protocol Syntax INTEGER Access read write Status mandatory Return Value Returns 64 0x40 Writes not supported 3 14 59047 10 D 3 MIB II Objects ipInReceives 1 3 6 1 2 1 4 3 a ipInReceives 1 3 6 1 2 1 4 3 The total number of input datagrams received from interfaces including those received in error Syntax Counter Access read only Status mandatory ipInHdrErrors 1 3 6 1 2 1 4 4 The number of input datagrams discarded due to errors in their IP headers These include bad checksums version number mismatch other format errors time to live exceeded and errors discovered in processing their IP options Syntax Counter Access read only Status mandatory ipInAddrErrors 1 3 6 1 2 1 4 5 The number of input datagrams discarded because the IP address in their IP header s destination field was not a valid address to be received at this entity This count includes invalid addresses for example 0 0 0 0 and addresses of unsupported Classes for example Class E For entities which are not IP Gateways and therefore do not forward datagrams this counter includes datagrams discarded because the destination address was not a local address Syntax Counter Access read only Status mandatory 59047 10 D 3 15 3 MIB II Objects ipForwDatagrams 1 3 6 1 2 1 4 6 E e ipForwDatagrams 1 3 6 1 2 1 4 6 The number of input datagrams for which this entity was no
160. nline courses certification exams and scheduling of in person training Technical Certification courses include installation maintenance and troubleshooting QLogic products Upon demonstrating knowledge using live equipment QLogic awards a certificate identifying the student as a certified professional You can reach the training professionals at QLogic by e mail at training qglogic com xxiii Preface Technical Support ee Contact Information QLogic Technical Support for products under warranty is available during local standard working hours excluding QLogic Observed Holidays For customers with extended service consult your plan for available hours For Support phone numbers see the Contact Support link at support qlogic com Support Headquarters QLogic Corporation 4601 Dean Lakes Blvd Shakopee MN 55379 USA QLogic Web Site www glogic com Technical Support Web Site http support glogic com Technical Support E mail support qlogic com Technical Training E mail trainin logic com Knowledge Base The QLogic knowledge base is an extensive collection of QLogic product information that you can search for specific solutions We are constantly adding to the collection of information in our knowledge base to provide answers to your most urgent questions Access the knowledge base from the QLogic Support Center http support glogic com XXIV 59047 10 D 1 SNMP Overview Simple Network Management Protocol is the
161. nnect request received by this FxPort from its attached NxPort Syntax Counter32 Access read only Status current Return Value Unsupported Always returns error status NoSuchName 59047 10 D 5 25 5 Fabric Element MIB Objects fcFxPortC1 OutFrames 1 3 6 1 2 1 75 1 4 1 1 2 E fcFxPortC1OutFrames 1 3 6 1 2 1 75 1 4 1 1 2 The number of Class 1 frames other than Class 1 connect request delivered through this FxPort to its attached NxPort Syntax Counter32 Access read only Status current Return Value Unsupported Always returns error status NoSuchName fcFxPortC1InOctets 1 3 6 1 2 1 75 1 4 1 1 3 The number of Class 1 frame octets including the frame delimiters received by this FxPort from its attached NxPort Syntax Counter32 Access read only Status current Return Value Unsupported Always returns error status NoSuchName fcFxPortC1 OutOctets 1 3 6 1 2 1 75 1 4 1 1 4 The number of Class 1 frame octets including the frame delimiters delivered through this FxPort its attached NxPort Syntax Counter32 Access read only Status current Return Value Unsupported Always returns error status NoSuchName 5 26 59047 10 D 5 Fabric Element MIB Objects fcFxPortC1Discards 1 3 6 1 2 1 75 1 4 1 1 5 DOI CC el fcFxPortC1Discards 1 3 6 1 2 1 75 1 4 1 1 5 The number of Class 1 frames discarded by this FxPort Syntax Counter32 Access read only Status current Return Value Unsupported Always
162. ntClass2PBSYFrames 4 70 connUnitPortStatCountClass2PRJTFrames 4 70 connUnitPortStatCountClass2RxFrames 4 69 connUnitPortStatCountClass2TxFrames 4 69 connUnitPortStatCountClass3Discards 4 71 connUnitPortStatCountClass3RxFrames 4 71 connUnitPortStatCountClass3TxFrames 4 71 connUnitPortStatCountDelimiterErrors 4 78 connUnitPortStatCountEncodingDisparityError s 4 79 connUnitPortStatCountError 4 63 connUnitPortStatCountFBSYFrames 4 65 connUnitPortStatCountFramesTooLong 4 77 connUnitPortStatCountFrames Truncated 4 78 connUnitPortStatCountFRJTFrames 4 66 connUnitPortStatCountInputBuffersFull 4 65 connUnitPortStatCountInvalidCRC 4 75 connUnitPortStatCountInvalidOrderedSets 4 77 connUnitPortStatCountInvalidTxWords 4 76 connUnitPortStatCountLinkFailures 4 75 Index 2 connUnitPortStatCountLossofSignal 4 76 connUnitPortStatCountLossofSynchronization 4 77 connUnitPortStatCountNumberLinkResets 4 74 connUnitPortStatCountNumberOfflineSequen ces 4 75 connUnitPortStatCountPBSYFrames 4 66 connUnitPortStatCountPrimitiveSequenceProt ocolErrors 4 76 connUnitPortStatCountPRJTFrames 4 66 connUnitPortStatCountRxBroadcastObjects 4 72 connUnitPortStatCountRxElements 4 64 connUnitPortStatCountRxLinkResets 4 73 connUnitPortStatCountRxMulticastObjects 4 72 connUnitPortStatCountRxObjects 4 63 connUnitPortStatCountRxOfflineSequences 4 74 connUnitPortStatCountTxBroadcastObjects 4 73 connUnitPortStatCountTxElements 4 64 connUnitPortStatCountTxLinkResets 4 73
163. ntered for a port fcFxPortinvalidTxWords 1 3 6 1 2 1 75 1 3 1 1 5 The number of invalid transmission words detected by the FxPort Syntax Counter32 Access read only Status current Return Value The total number of DecodeErrors encountered for a port 5 22 59047 10 D 5 Fabric Element MIB Objects fcFxPortInvalidCrcs 1 3 6 1 2 1 75 1 3 1 1 6 I fcFxPortinvalidCrcs 1 3 6 1 2 1 75 1 3 1 1 6 The number of invalid CRCs detected by this FxPort Syntax Counter32 Access read only Status current Return Value The total number of InvalidCRCs encountered for a port fcFxPortDelimiterErrors 1 3 6 1 2 1 75 1 3 1 1 7 The number of Delimiter Errors detected by this FxPort Syntax Counter32 Access read only Status current Return Value Unsupported Always returns error status NoSuchName fcFxPortAddressldErrors 1 3 6 1 2 1 75 1 3 1 1 8 The number of address identifier errors detected by this FxPort Syntax Counter32 Access read only Status current Return Value The total number of InvDestAddrs encountered for a port 59047 10 D 5 23 5 Fabric Element MIB Objects fcFxPortLinkResetlns 1 3 6 1 2 1 75 1 3 1 1 9 ee fcFxPortLinkResetins 1 3 6 1 2 1 75 1 3 1 1 9 The number of Link Reset Protocols received by this FxPort from the attached NxPort Syntax Counter32 Access read only Status current Return Value The total number of RxLinkResets received by a port fcFxPortLinkResetOuts 1 3 6 1 2 1 75 1 3 1 1 10
164. only Status mandatory Return Value The total number LossOfSyncs detected by this port connUnitPortStatCountInvalidOrderedSets 1 3 6 1 3 94 4 5 1 45 Count of invalid ordered sets received at port This count is part of the Link Error Status Block LESB FC PH 29 8 This is a Fibre Channel only statistic Syntax OCTET STRING SIZE 8 Access read only Status mandatory Return Value Unsupported Always returns high order bit to 1 with all other bits set to zero connUnitPortStatCountFramesTooLong 1 3 6 1 3 94 4 5 1 46 Count of frames received at this port where the frame length was greater than what was agreed to in FLOGI PLOGI This could be caused by losing the end of frame delimiter This is a Fibre Channel only statistic Syntax OCTET STRING SIZE 8 Access read only Status mandatory Return Value Unsupported Always returns high order bit to 1 with all other bits set to zero 59047 10 D 4 77 4 Fibre Alliance MIB Objects connUnitPortStatCountFramesTruncated 1 3 6 1 3 94 4 5 1 47 SSS ne connUnitPortStatCountFramesTruncated 1 3 6 1 3 94 4 5 1 47 Count of frames received at this port where the frame length was less than the minimum indicated by the frame header normally 24 bytes It could be more if the DFCTL field indicates an optional header should have been present This is a Fibre Channel only statistic Syntax OCTET STRING SIZE 8 Access read only Status mandatory Return Value Unsupported Always
165. ontains this event table Syntax FeGloballd Access read only Status mandatory Return Value The World Wide Name of the switch followed by 8 bytes of zeros For example 10 00 00 CO DD 00 71 C9 00 00 00 00 00 00 00 OO 4 44 59047 10 D 4 Fibre Alliance MIB Objects connUnitEventIndex 1 3 6 1 3 94 1 11 1 2 T353 CZ connUnitEventindex 1 3 6 1 3 94 1 11 1 2 Each connectivity unit has its own event buffer As it wraps it may write over previous events This object is an index into the buffer It is recommended that this table be read using getNext s to retrieve the initial table The management application should read the event table at periodic intervals and then determine if any new entries were added by comparing the last known index value with the current highest index value The management application should then update its copy of the event table If the read interval is too long it is possible that there may be events that may not be contained in the agent s internal event buffer For example an agent may read events 50 75 At the next read interval connUnitEventCurrID is 189 If the management application tries to read event index 76 and the agent s internal buffer is 100 entries max event index 76 will no longer be available The index value is an incrementing integer starting from one every time there is a table reset On table reset all contents are emptied and all indexes are set to zero When an event is added to the t
166. or producing RFCs The standards body responsible for Internet standards including SNMP TCP IP and policy for QoS Internet Control Message Protocol A control protocol strongly related to IP and TCP and used to convey a variety of control and error indications InteropCredit Port configuration parameter that adjusts the number of port buffer credits to allow interoperability with some non QLogic switches Glossary 2 IP Internet Protocol ISLSecurity ISLSecurity determines which switches a port will establish a link with ANY we will link with any switch Ours we will only link to another QLogic switch None the port will not establish an ISL link LCFEnable LCFEnable gives preference to Link control frames such as Class 2 ACK frames over other frames when queued for transmission in the switch This may provide better performance when running Class 2 traffic LCFEnable is incompatible with MFSEnable and both cannot be selected True False LIP Loop Initialization Primitive sequence Location Specifies the switch location The default is undefined Logged In LED A port LED that indicates device login or loop initialization status Management Information Base A set of guidelines and definitions for the Fibre Channel functions The specification and formal description of a set of objects and variables that can be read and possibly written using the SNMP protocol Various standard MIBs are defined
167. ortC3Discards 1 3 6 1 2 1 75 1 4 3 1 5 AAMUA fcFxPortC3Discards 1 3 6 1 2 1 75 1 4 3 1 5 The number of Class 3 frames discarded by this FxPort Syntax Counter32 Access read only Status current Return Value The total number of Class3Toss discarded by a port Capability Group The objects described in this section are in table format indexed by switch index and port index An example of how to access one of these objects is snmpget localhost public fcFxPortName 1 1 The Capability Group consists of a table describing information about what each FxPort is inherently capable of operating or supporting A capability may be used as expressed in its respective object value in the Configuration group fcFxPortCapFcphVersionHigh 1 3 6 1 2 1 75 1 5 1 1 1 The highest or most recent version of FC PH that the FxPort is capable of supporting Syntax FephVersion Access read only Status current Return Value Always returns 32 0x20 fcFxPortCapFcphVersionLow 1 3 6 1 2 1 75 1 5 1 1 2 The lowest or earliest version of FC PH that the FxPort is capable of supporting Syntax FephVersion Access read only Status current Return Value Always returns 9 59047 10 D 5 33 5 Fabric Element MIB Objects fcFxPortCapBbCreditMax 1 3 6 1 2 1 75 1 5 1 1 3 E NN fcFxPortCapBbCreditMax 1 3 6 1 2 1 75 1 5 1 1 3 The maximum number of receive buffers available for holding Class 1 connect request Class 2 or Class 3 frames from the attac
168. ortY 4 52 connUnitLinkConnldY 4 53 connUnitLinkCurrlndex 4 53 connUnitLinkIndex 4 49 connUnitLinkNodeldX 4 50 connUnitLinkNodeldY 4 51 connUnitLinkPortNumber 4 51 connUnitLinkPortNumberX 4 50 connUnitLinkPortWwnX 4 50 connUhnitLinkPortWwnY 4 51 connUnitLinkUnitld 4 49 connUnitLinkUnitTypeY 4 53 connUnitLocation 4 16 connUnitMaxEvents 4 18 connUnitModuleld 4 13 connUnitName 4 14 connUnitNumE vents 4 18 connUnitNumports 4 7 connUnitNumRevs 4 13 connUnitNumSensors 4 12 connUnitNumZones 4 13 connUnitPortControl 4 38 connUnitPortFCClassCap 4 31 connUnitPortFCClassOp 4 32 connUnitPortFCld 4 36 connUnitPortHWState 4 43 connUnitPortIndex 4 29 connUnitPortModule Type 4 35 connUnitPortName 4 40 connUnitPortNodeWwn 4 42 Index 1 Reference Guide Simple Network Management Protocol QLogic 3000 5000 9000 Series Fibre Channel Switch E NY connUnitPortPhysicalNumber 4 40 connUnitPortProtocolCap 4 41 connUnitPortProtocolOp 4 42 connUnitPortRevision 4 36 connUnitPortSn 4 36 connUnitPortSpeed 4 37 connUnitPortStatCountAddressErrors 4 78 connUnitPortStatCountBBCreditZero 4 64 connUnitPortStatCountClass1 FBSYFrames 4 67 connUnitPortStatCountClass1FRJTFrames 4 68 connUnitPortStatCountClass1PBSYFrames 4 68 connUnitPortStatCountClass1PRJTFrames 4 68 connUnitPortStatCountClass1RxFrames 4 67 connUnitPortStatCountClass1TxFrames 4 67 connUnitPortStatCountClass2FBSYFrames 4 69 connUnitPortStatCountClass2FRJT Frames 4 70 connUnitPortStatCou
169. oup Syntax system OBJECT IDENTIFIER s mib 2 1 interfaces OBJECT IDENTIFIER mib 2 2 at OBJECT IDENTIFIER mib 2 3 ip OBJECT IDENTIFIER mib 2 4 icmp OBJECT IDENTIFIER mib 2 5 tcp OBJECT IDENTIFIER mib 2 6 udp OBJECT IDENTIFIER mib 2 7 snmp OBJECT IDENTIFIER mib 2 11 System Group Implementation of the System group is mandatory for all systems If an agent is not configured to have a value for any of these variables a string of length 0 is returned 59047 10 D Fi 3 MIB II Objects sysDescr 1 3 6 1 2 1 1 1 E i i sysDescr 1 3 6 1 2 1 1 1 A textual description of the entity This value should include the full name and version identification of the system s hardware type operating system and networking software It is mandatory that this only contain printable American Standard Code for Information Interchange ASCII characters Syntax DisplayString SIZE 0 255 Access read only Status Mandatory Return Value The default values are QLogic 5200 SANbox 5200 FC Switch QLogic 5202 SANbox 5202 FC Switch QLogic 5600 SANbox 5600 FC Switch QLogic 5602 SANbox 5602 FC Switch sysObjectID 1 3 6 1 2 1 1 2 The vendor s authoritative identification of the network management subsystem contained in the entity This value is allocated within the SMI enterprise subtree 1 3 6 1 4 1 and provides an easy and unambiguous means for determining what kind of
170. oved to be in error Syntax Counter Access read only Status mandatory egpOutMsgs 1 3 6 1 2 1 8 3 The total number of locally generated EGP messages Syntax Counter Access read only Status mandatory 59047 10 D 3 45 3 MIB II Objects egpOutErrors 1 3 6 1 2 1 8 4 E egpOutErrors 1 3 6 1 2 1 8 4 The number of locally generated EGP messages not sent due to resource limitations within an EGP entity Syntax Counter Access read only Status mandatory The EGP Neighbor Table The EGP neighbor table contains information about this entity s EGP neighbors egpNeighState 1 3 6 1 2 1 8 5 1 1 The EGP state of the local system with respect to this entry s EGP neighbor Each EGP state is represented by a value that is one greater than the numerical value associated with the state in RFC 904 Syntax INTEGER Access read only Status mandatory egpNeighAddr 1 3 6 1 2 1 8 5 1 2 The IP address of this entry s EGP neighbor Syntax IpAddress Access read only Status mandatory 3 46 59047 10 D 3 MIB II Objects egpNeighAs 1 3 6 1 2 1 8 5 1 3 AAA egpNeighAs 1 3 6 1 2 1 8 5 1 3 The autonomous system of this EGP peer Zero should be specified if the autonomous system number of the neighbor is not yet known Syntax INTEGER Access read only Status mandatory egpNeighInMsgs 1 3 6 1 2 1 8 5 1 4 The number of EGP messages received without error from this EGP peer Syntax Counter Access read only Statu
171. packet could be to free up buffer space Syntax Counter Access read only Status mandatory 3 10 59047 10 D 3 MIB II Objects ifOutErrors 1 3 6 1 2 1 2 2 1 20 SEE ifOutErrors 1 3 6 1 2 1 2 2 1 20 The number of outbound packets that could not be transmitted because of errors Syntax Counter Access read only Status mandatory ifOutQLen 1 3 6 1 2 1 2 2 1 21 The length in packets of the output packet queue Syntax Gauge Access read only Status mandatory ifSpecific 1 3 6 1 2 1 2 2 1 22 A reference to MIB definitions specific to the particular media being used to realize the interface For example if the interface is realized by an Ethernet then the value of this object refers to a document that defines objects specific to Ethernet If this information is not present its value should be set to the OBJECT IDENTIFIER 0 0 which is a syntactically valid object identifier and any conformant implementation of ASN 1 Abstract Syntax Notation and BER must be able to generate and recognize this value Syntax OBJECT IDENTIFIER Access read only Status mandatory 59047 10 D 3 11 3 MIB II Objects The Address Translation Group lalala ee The Address Translation Group Implementation of the Address Translation group is mandatory for all systems However this group is deprecated by MIB II That is it is being included solely for compatibility with MIB I Nodes and will most likely be excluded from MIB III Nodes From MIB
172. ponents of the switch QLogic 5200 3 QLogic 5202 3 QLogic 5600 3 QLogic 5602 3 QLogic 9000 Series is dependent on number of blades installed connUnitNumZones 1 3 6 1 3 94 1 6 1 18 Number of zones defined in connUnitZoneTable Syntax INTEGER Access read only Status obsolete Return Value This object is obsolete Always returns error status NoSuchName connUnitModuleld 1 3 6 1 3 94 1 6 1 19 This is a unique ID persistent between boots that can be used to group a set of connUnits together into a module The intended use would be to create a connUnit with a connUnitType of module to represent a physical or logical group of connectivity units Then the value of the group would be set to the value of connUnitld for this container connUnit connUnitModuleld should be zeros if this connUnit is not part of a module Syntax Access Status Return Value 59047 10 D FcGloballd read only mandatory The World Wide Name of the switch followed by 8 bytes of zeros For example 10 00 00 CO DD 00 71 C9 00 00 00 00 00 00 00 00 4 13 4 Fibre Alliance MIB Objects connUnitName 1 3 6 1 3 94 1 6 1 20 SSS connUnitName 1 3 6 1 3 94 1 6 1 20 A display string containing a name for this connectivity unit This object value should be persistent between boots Syntax Access Status Return Value DisplayString SIZE 0 79 read write mandatory The SymbolicName of Switch The default s are QLo
173. rface Syntax Bits pause 0 Access read only Status current The dot3PauseTable EtherLike MIB dot3PauseAdminMode 1 3 6 1 2 1 10 7 10 1 1 This object represents the administratively configured PAUSE mode for this interface disabled 1 enabledXmit 2 enabledRcv 3 enabledXmitAndRcv 4 Syntax integer Access read only Status current 3 52 59047 10 D 3 MIB II Objects EtherLike MIB dot3PauseOperMode 1 3 6 1 2 1 10 7 10 1 2 A uhu EtherLike MIB dot3PauseOperMode 1 3 6 1 2 1 10 7 10 1 2 This object reflects the PAUSE mode currently in use on this interface disabled 1 enabledXmit 2 enabledRcv 3 enabledXmitAndRcv 4 Syntax integer Access read only Status current EtherLike MIB dot3InPauseFrames 1 3 6 1 2 1 10 7 10 1 3 A count of MAC Control frames received on this interface with an opcode indicating the PAUSE operation Syntax counter32 Access read only Status current EtherLike MIB dot3OutPauseFrames 1 3 6 1 2 1 10 7 10 1 4 A count of MAC Control frames transmitted on this interface with an opcode indicating the PAUSE operation Syntax counter32 Access read only Status current 59047 10 D 3 53 3 MIB II Objects The SNMP Group SSS The SNMP Group Implementation of the SNMP group is mandatory for all systems which support an SNMP protocol entity Some of the objects defined below will be zero valued in those SNMP implementations that are optimized to support only those functions specific to eith
174. rget m rowActive 1 READ Indicates that this row exists and that traps are enabled to be sent to the target Q WRITE If the row does not exist and the agent allows writes to the trap table then a new row is created The values of the optional columns will be set to default values Traps are enabled to be sent to the target If the row already exists then traps are enabled to be sent to the target A value of rowActive or rowInactive must be specified to create a row in the table Syntax INTEGER rowDestroy 1 Remove row from table rowlnactive 2 Row exists but traps disabled rowActive 3 Row exists and is enabled for sending traps Access read write Status mandatory Return Value Returns rowActive 3 if valid entry in trap table 59047 10 D 4 95 4 Fibre Alliance MIB Objects Related Traps EE Related Traps The following traps contain the trap information being sent from the agent to the manager connUnitStatusChange 1 3 6 1 3 94 0 1 The overall status of the connectivity unit has changed The recommended severity level for filtering is alert Sent whenever a Switch OperChange or Switch StateChange event occurs Variables connUnitStatus connUnitState connUnitDeletedTrap 1 3 6 1 3 94 0 3 A connUnit has been deleted from this agent The recommended severity level for filtering is warning Sent whenever an Eport OperChange event occurs and the connUni
175. rity that will be logged by this connectivity unit All events of severity less than or equal to connUnitEventFilter are logged in connUnitEventTable Syntax FcEventSeverity Access read write Status mandatory Return Value The switch log level setting Refer to the following tables for connUnitEventFilter values Table 4 7 connUnitEventFilter Read Return Values Return Value Severity Levels Critical Warn Info None Critical 4 Warning 6 Info 8 Unknown 1 Table 4 8 connUnitEventFilter Control Write Values Control Value Emergency 2 Alert 3 Critical 4 Error 5 Warning 6 Notify 7 Info 8 Debug 9 Mark 10 Unknown 1 Critical Critical Critical Warn Warn Info Info Info Info None 59047 10 D 4 Fibre Alliance MIB Objects connUnitNumEvents 1 3 6 1 3 94 1 6 1 26 SSS connUnitNumE vents 1 3 6 1 3 94 1 6 1 26 Number of events currently in the connUnitEventTable Syntax Access Status Return Value INTEGER read only mandatory An integer indicating the number of events in the event table connUnitMaxE vents 1 3 6 1 3 94 1 6 1 27 Maximum number of events that can be defined in connUnitEventTable Syntax INTEGER Access read only Status mandatory Return Value Always returns 30 connUnitEventCurriID 1 3 6 1 3 94 1 6 1 28 The last used event ID connUnitEventIndex Syntax INTEGER Access read only Status mandatory Retur
176. ry tcpPassiveOpens 1 3 6 1 2 1 6 6 The number of times TCP connections have made a direct transition to the SYN RCVD state from the LISTEN state Syntax Counter Access read only Status mandatory 59047 10 D 3 37 3 MIB II Objects tcpAttemptFails 1 3 6 1 2 1 6 7 PE tcpAttemptFails 1 3 6 1 2 1 6 7 The number of times TCP connections have made a direct transition to the CLOSED state from either the SYN SENT state or the SYN RCVD state plus the number of times TCP connections have made a direct transition to the LISTEN state from the SYN RCVD state Syntax Counter Access read only Status mandatory tcpEstabResets 1 3 6 1 2 1 6 8 The number of times TCP connections have made a direct transition to the CLOSED state from either the ESTABLISHED state or the CLOSE WAIT state Syntax Counter Access read only Status mandatory tcpCurrEstab 1 3 6 1 2 1 6 9 The number of TCP connections for which the current state is either ESTABLISHED or CLOSE WAIT Syntax Gauge Access read only Status mandatory tcpInSegs 1 3 6 1 2 1 6 10 The total number of segments received including those received in error This count includes segments received on currently established connections Syntax Counter Access read only Status mandatory 3 38 59047 10 D 3 MIB II Objects tcpOutSegs 1 3 6 1 2 1 6 11 a tcpOutSegs 1 3 6 1 2 1 6 11 The total number of segments sent including those on current connections but exc
177. s operation Examples of these operations are transitioning from online to offline a request non participating command to the Loop Port state machine or removal of the port from an arbitrated loop by a hub unbypassConnUnitPort If the addressed connUnit allows this operation to be performed to this port the addressed port performs a vendor specific unbypass operation Examples of these operations are the Link Failure protocol a request participating command to the Loop Port state machine or addition of the port to an arbitrated loop by a hub offlineConnUnitPort If the addressed connUnit allows this operation to be performed to this port the addressed port performs a vendor specific offline operation Examples of these operations are disabling a port s transceiver the Link Failure protocol request non participating command to the Loop Port state machine or removal of the port from an arbitrated loop by a hub onlineConnUnitPort If the addressed connUnit allows this operation to be performed to this port the addressed port performs a vendor specific online operation Examples of these operations are enabling a port s transceiver the Link Failure protocol request participating command to the Loop Port state machine or addition of the port from an arbitrated loop by a hub resetConnUnitPortCounters If the addressed connUnit allows this operation to be performed to this port the addressed port statistics
178. s mandatory egpNeighInErrs 1 3 6 1 2 1 8 5 1 5 The number of EGP messages received from this EGP peer that proved to be in error for example bad EGP checksum Syntax Counter Access read only Status mandatory egpNeighOutMsgs 1 3 6 1 2 1 8 5 1 6 The number of locally generated EGP messages to this EGP peer Syntax Counter Access read only Status mandatory 59047 10 D 3 47 3 MIB II Objects egpNeighOutErrs 1 3 6 1 2 1 8 5 1 7 D E egpNeighOutErrs 1 3 6 1 2 1 8 5 1 7 The number of locally generated EGP messages not sent to this EGP peer due to resource limitations within an EGP entity Syntax Counter Access read only Status mandatory egpNeighInErrMsgs 1 3 6 1 2 1 8 5 1 8 The number of EGP defined error messages received from this EGP peer Syntax Counter Access read only Status mandatory egpNeighOutErrMsgs 1 3 6 1 2 1 8 5 1 9 The number of EGP defined error messages sent to this EGP peer Syntax Counter Access read only Status mandatory egpNeighStateUps 1 3 6 1 2 1 8 5 1 10 The number of EGP state transitions to the UP state with this EGP peer Syntax Counter Access read only Status mandatory 3 48 59047 10 D 3 MIB II Objects egpNeighStateDowns 1 3 6 1 2 1 8 5 1 11 TO EE egpNeighStateDowns 1 3 6 1 2 1 8 5 1 11 The number of EGP state transitions from the UP state to any other state with this EGP peer Syntax Counter Access read only Status mandatory egpNeighintervalHello 1 3 6 1 2 1 8 5
179. s within the zones An example of how to access one of these objects fcmgmt connSet connUnitZone Table connUnitZoneEntry connUnitZonelndex 1 1 connUnitZonelndex 1 3 6 1 3 94 1 13 1 1 Unique table index for each zone Valid values are between 1 and connUnitZoneSetNumZones Syntax INTEGER 1 2147483647 Access read only Status mandatory Return Value Returns index number for each zone within the active zone set connUnitZoneMemberlIndex 1 3 6 1 3 94 1 13 1 2 Unique table index for each zone member Valid values are between 1 and connUnitZoneNumMembers Syntax INTEGER 1 2147483647 Access read only Status mandatory Return Value Returns index number for each member within a zone 4 54 59047 10 D 4 Fibre Alliance MIB Objects connUnitZoneSetName 1 3 6 1 3 94 1 13 1 3 TO a a Z connUnitZoneSetName 1 3 6 1 3 94 1 13 1 3 Name of the active zone set to which the zone and zone member belong Syntax DisplayString SIZE 0 79 Access read only Status mandatory Return Value Returns the zone set name connUnitZoneSetNumZones 1 3 6 1 3 94 1 13 1 4 The number of zones in the active zone set Syntax INTEGER Access read only Status mandatory Return Value Returns the number of zones within the active zone set connUnitZoneName 1 3 6 1 3 94 1 13 1 5 Name of the zone Syntax DisplayString SIZE 0 79 Access read only Status mandatory Return Value Returns the name of the zone connUnitZoneCapabilities 1 3 6 1 3 94 1
180. s1PRJTFrames 1 3 6 1 3 94 4 5 1 19 Count of times that FRJT was returned to this port as a result of a Class 1 frame that was rejected at the destination N Port This is a Fibre Channel only statistic Syntax OCTET STRING SIZE 8 Access read only Status mandatory Return Value Unsupported Always returns high order bit to 1 with all other bits set to zero 4 68 59047 10 D 4 Fibre Alliance MIB Objects connUnitPortStatCountClass2RxFrames 1 3 6 1 3 94 4 5 1 20 TO AR connUnitPortStatCountClass2RxFrames 1 3 6 1 3 94 4 5 1 20 Count of Class 2 frames received at this port This is a Fibre Channel only statistic Syntax OCTET STRING SIZE 8 Access read only Status mandatory Return Value The total number of Class 2 frames received by a port connUnitPortStatCountClass2TxFrames 1 3 6 1 3 94 4 5 1 21 Count of Class 2 frames transmitted out this port This is a Fibre Channel only statistic Syntax OCTET STRING SIZE 8 Access read only Status mandatory Return Value The total number of Class 2 frames transmitted by a port connUnitPortStatCountClass2FBSYFrames 1 3 6 1 3 94 4 5 1 22 Count of times that FBSY was returned to this port as a result of a Class 2 frame that could not be delivered to the other end of the link This occurs if either the fabric or the destination port is temporarily busy FBSY can only occur on SOFc1 frames the frames that establish a connection This is a Fibre Channel only statist
181. sionAgreed 1 3 6 1 2 1 75 1 2 3 1 2 TO QO fcFxPortFcphVersionAgreed 1 3 6 1 2 1 75 1 2 3 1 2 The version of FC PH that the FxPort has agreed to support from the Fabric Login Syntax FephVersion Access read only Status current Return Value Unsupported fcFxPortNxPortBbCredit 1 3 6 1 2 1 75 1 2 3 1 3 The total number of buffers available for holding class 1 connect request class 2 or class 3 frames to be transmitted to the attached NxPort It is for buffer to buffer flow control in the direction from FxPort to NxPort The buffer to buffer flow control mechanism is indicated in the respective fcFxPortBbCreditModel Syntax FeBbCredit Access read only Status current Return Value Unsupported fcFxPortNxPortRxDataFieldSize 1 3 6 1 2 1 75 1 2 3 1 4 The Receive Data Field Size of the attached NxPort This object specifies the largest Data Field Size for an FT 1 frame that can be received by the NxPort Syntax Access Status Return Value 59047 10 D FcRxDataFieldSize read only current Unsupported 5 17 5 Fabric Element MIB Objects fcFxPortCosSuppAgreed 1 3 6 1 2 1 75 1 2 3 1 5 E NN fcFxPortCosSuppAgreed 1 3 6 1 2 1 75 1 2 3 1 5 A variable indicating that the attached NxPort has requested the FxPort for the support of classes of services and the FxPort has granted the request Syntax Access Status Return Value FcCosCap read only current The bits have the following bit mapped definition
182. sis or the number of full boxes ina rack Syntax INTEGER Access read only Status mandatory Return Value The number of switches in fabric systemURL 1 3 6 1 3 94 1 2 The top level URL of the system If it does not exist the value is an empty string The URL format is implementation dependant and can have keywords embedded that are preceded by a percent sign for example USER Syntax DisplayString Access read write Status mandatory Return Value The switch IP address For example http 10 0 0 1 Writes not supported returns NoSuchName 4 4 59047 10 D 4 Fibre Alliance MIB Objects statusChangeTime 1 3 6 1 3 94 1 3 I 89J statusChangeTime 1 3 6 1 3 94 1 3 The sysUpTime timestamp at which the last status change occurred for any members of the set in centiseconds Syntax TimeTicks Access read only Status obsolete Return Value The sysUpTime timestamp at which the last status change occurred configurationChangeTime 1 3 6 1 3 94 1 4 The sysUpTime timestamp at which the last configuration change occurred for any members of the set in centiseconds This represents a union of change information for connUnitConfigurationChange Time Syntax TimeTicks Access read only Status obsolete Return Value The sysUpTime timestamp at which the last configuration change occurred connUnitTableChangeTime 1 3 6 1 3 94 1 5 The sysUpTime timestamp at which the connUnitTable was updated an entry was either adde
183. snmpOutTooBigs 1 3 6 1 2 1 11 20 3 59 snmpOutNoSuchNames 1 3 6 1 2 1 11 21 3 59 snmpOutBadValues 1 3 6 1 2 1 11 22 3 59 snmpOutGenErrs 1 3 6 1 2 1 11 24 3 59 snmpOutGetRequests 1 3 6 1 2 1 11 25 3 60 snmpOutGetNexts 1 3 6 1 2 1 11 26 3 60 snmpOutSetRequests 1 3 6 1 2 1 11 27 3 60 snmpOutGetResponses 1 3 6 1 2 1 11 28 3 60 snmpOutTraps 1 3 6 1 2 1 11 29 3 61 vili 59047 10 D 59047 10 D Reference Guide Simple Network Management Protocol QLogic 3000 5000 9000 Series Fibre Channel Switch snmpEnableAuthenTraps 1 3 6 1 2 1 11 30 3 61 The ifX Table na Ra KAG PAR EREKA BAR RAB DALAN DA AGAR EL ea a dee 3 61 ifName 1 3 6 1 2 1 31 1 1 1 1 3 61 ifInMulticastPkts 1 3 6 1 2 1 31 1 1 1 2 3 62 ifinBroadcastPkts 1 3 6 1 2 1 31 1 1 1 3 3 62 ifOutMulticastPkts 1 3 6 1 2 1 31 1 1 1 4 3 62 ifOutBroadcastPkts 1 3 6 1 2 1 31 1 1 15 3 63 Highspeed 1 3 6 1 2 1 31 1 1 1 15 3 63 ifPromiscuousMode 1 3 6 1 2 1 31 1 1 1 16 3 63 ifConnectorPresent 1 3 6 1 2 1 31 1 1 1 17 3 64 ifAlias 1 3 6 1 2 1 31 1 1 1 18
184. ss CTRL P J Press the UP ARROW key 59047 10 D Preface Technical Support TO SESE m Textin italics indicates terms emphasis variables or document titles For example QO For a complete listing of license agreements refer to the QLogic Software End User License Agreement What are shortcut keys To enter the date type mm dd yyyy where mm is the month dd is the day and yyyy is the year m Topic titles between quotation marks identify related topics either within this manual or in the online help which is also referred to as the help system throughout this document Technical Support Training 59047 10 D Customers should contact their authorized maintenance provider for technical support of their QLogic products QLogic direct customers may contact QLogic Technical Support others will be redirected to their authorized maintenance provider Visit the QLogic support Web site listed in Contact Information for the latest firmware and software updates For details about available service plans or for information about renewing and extending your service visit the Service Program web page at http Awww glogic com services QLogic offers training for technical professionals for all iSCSI InfiniBand and Fibre Channel products From the main QLogic web page at www glogic com click the Support tab at the top and then click Training and Certification on the left The QLogic Global Training portal offers o
185. t 8 E e port 9 Donor other 2 4 30 59047 10 D 4 Fibre Alliance MIB Objects connUnitPortFCClassCap 1 3 6 1 3 94 1 10 1 4 Table 4 20 ConnUnitPortType Return Values Continued Switch Port Type Return Value other unknown 1 connUnitPortFCClassCap 1 3 6 1 3 94 1 10 1 4 Bit mask that specifies the classes of service capability of this port If this is not applicable return all bits set to zero The bits have the following definition unknown 0 class f 1 class one 2 class two 4 class three 8 class four 16 class five 32 class six 64 Syntax OCTET STRING SIZE 2 Access read only Status mandatory Return Value Always returns 0x0d Class f Class 2 and Class 3 59047 10 D 4 31 4 Fibre Alliance MIB Objects connUnitPortFCClassOp 1 3 6 1 3 94 1 10 1 5 AA NY connUnitPortFCClassOp 1 3 6 1 3 94 1 10 1 5 Bit mask that specifies the classes of service that are currently operational If this is not applicable return all bits set to zero This object has the same definition as connUnitPortFCClassCap connUnitPortEntry 5 Syntax Access Status Return Value OCTET STRING SIZE 2 read only mandatory If F or FL returns 0x0c Class 2 and Class 3 else returns Ox0d Class f Class 2 and Class 3 connUnitPortState 1 3 6 1 3 94 1 10 1 6 The user selected state of the port hardware Syntax INTEGER unknown 1 online 2
186. t operational state of the interface The testing 3 state indicates that no operational packets can be passed Syntax INTEGER Access read only Status mandatory ifLastChange 1 3 6 1 2 1 2 2 1 9 The value of sysUpTime at the time the interface entered its current operational state If the current state was entered prior to the last re initialization of the local network management subsystem then this object contains a zero value Syntax TimeTicks Access read only Status mandatory ifInOctets 1 3 6 1 2 1 2 2 1 10 The total number of octets received on the interface including framing characters Syntax Counter Access read only Status mandatory ifinUcastPkts 1 3 6 1 2 1 2 2 1 11 The number of subnetwork unicast packets delivered to a higher layer protocol Syntax Counter Access read only Status mandatory 3 8 59047 10 D 3 MIB II Objects ifINNUcastPkts 1 3 6 1 2 1 2 2 1 12 a ifInNUcastPkts 1 3 6 1 2 1 2 2 1 12 The number of non unicast that is subnetwork broadcast or subnetwork multicast packets delivered to a higher layer protocol Syntax Counter Access read only Status mandatory ifinDiscards 1 3 6 1 2 1 2 2 1 13 The number of inbound packets that were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher layer protocol One possible reason for discarding such a packet could be to free up buffer space Syntax Counter Access read only Status man
187. t their final IP destination As a result an attempt was made to find a route to forward them to that final destination In entities that do not act as IP Gateways this counter will include only those packets that were Source Routed from this entity and the Source Route option processing was successful Syntax Counter Access read only Status mandatory ipinUnknownProtos 1 3 6 1 2 1 4 7 The number of locally addressed datagrams received successfully but discarded because of an unknown or unsupported protocol Syntax Counter Access read only Status mandatory ipInDiscards 1 3 6 1 2 1 4 8 The number of input IP datagrams for which no problems were encountered to prevent their continued processing but which were discarded for example for lack of buffer space This counter does not include any datagrams discarded while awaiting reassembly Syntax Counter Access read only Status mandatory 3 16 59047 10 D 3 MIB II Objects ipInDelivers 1 3 6 1 2 1 4 9 TO CPC CA ipInDelivers 1 3 6 1 2 1 4 9 The total number of input datagrams successfully delivered to IP user protocols including ICMP Syntax Counter Access read only Status mandatory ipOutRequests 1 3 6 1 2 1 4 10 The total number of IP datagrams that local IP user protocols including ICMP supplied to IP in requests for transmission This counter does not include any datagrams counted in ipForwDatagrams Syntax Counter Access read only Status man
188. tDiscards 1 3 6 1 2 1 4 11 3 17 iv 59047 10 D Reference Guide Simple Network Management Protocol QLogic 3000 5000 9000 Series Fibre Channel Switch SE ipOutNoRoutes 1 3 6 1 2 1 4 12 3 18 ipReasmTimeout 1 3 6 1 2 1 4 13 3 18 ipReasmReqds 1 3 6 1 2 1 4 14 3 18 ipReasmOKs 1 3 6 1 2 1 4 15 3 18 ipReasmFails 1 3 6 1 2 1 4 16 3 19 ipFragOKs 1 3 6 1 2 1 4 17 3 19 ipFragFails 1 3 6 1 2 1 4 18 3 19 ipFragCreates 1 3 6 1 2 1 4 19 3 20 The IP Address Table 3 20 ipAdEntAddr 1 3 6 1 2 1 4 20 1 1 3 20 ipAdEntlflndex 1 3 6 1 2 1 4 20 1 2 3 20 ipAdEntNetMask 1 3 6 1 2 1 4 20 1 3 3 21 ipAdEntBcastAddr 1 3 6 1 2 1 4 20 1 4 3 21 ipAdEntReasmMaxSize 1 3 6 1 2 1 4 20 1 5 3 21 The IP Routing Table 3 22 ipRouteDest 1 3 6 1 2 1 4 21 1 1 3 22 ipRoutelflndex 1 3 6 1 2 1 4 21 1 2 3 22 ipRouteMetric1 1 3 6 1 2 1 4 21 1 3 3 23 ipRouteMetric2 1 3 6 1 2 1 4 21 1 4 3 23 ipRouteMe
189. tTable is smaller than previously noted A connUnit has gone away Variables connUnitld connUnitEventTrap 1 3 6 1 3 94 0 4 An event has been generated by the connectivity unit The recommended severity level for filtering is info Sent when a change notification occurs that does not fit into any other specific category Variables connUnitEventld connUnitEventType connUnitEventObject connUnitEventDescr Figure 4 1 provides the standard format of the connUnitEventDescr variable Chassis Blade and Port are always 0 Tag Chassis Port Y 27 33 0 0 0 TimeDate Module Addr Descr Event Blade Figure 4 1 connUnitEventDescr Variable Format 4 96 59047 10 D 4 Fibre Alliance MIB Objects connUnitEventTrap 1 3 6 1 3 94 0 4 ka Table 4 29 lists the fields in the connUnitEventDescr variable Table 4 29 connUnitEventDescr Variable Field Descriptions connUnitEventDescr Variable Description Tag The number that identifies the event Event The event counter Chassis The switch on which the event occurred Blade The I O blade on which the event occurred Port The port on which the event occurred TimeDate The time stamp of the event Module The software module where the event was initiated Addr The address in the software module where the event was initiated Descr The description of the event Table 4 30 lists the trap information returned for the
190. table counters will be set to zero 59047 10 D 4 Fibre Alliance MIB Objects connUnitPortControl 1 3 6 1 3 94 1 10 1 16 ls Each implementation may choose not to allow any or all of these values on a SET On a read if you do not support write then return invalid Otherwise return the last control operation attempted Syntax INTEGER unknown 1 invalid 2 resetConnUnitPort 3 bypassConnUnitPort 4 unbypassConnUnitPort 5 offlineConnUnitPort 6 onlineConnUnitPort 7 resetConnUnitPortCounters 8 Access read write Status mandatory Return Value Refer to Table 4 24 for connUnitPortControl read return values Table 4 24 ConnUnitPortControl Read Return Values Port Value Return Value Online online 7 Offline offline 6 Diagnostics offline 6 other unknown 1 Refer to Table 4 25 for connUnitPortControl write command values Table 4 25 ConnUnitPortControl Write Command Values Control Value Command Sent Online 7 online Offline 6 offline ResetCounters 8 clear counters other error returned 59047 10 D 4 39 4 Fibre Alliance MIB Objects connUnitPortName 1 3 6 1 3 94 1 10 1 17 ag GA A EF rrmq9m q9 rrr connUnitPortName 1 3 6 1 3 94 1 10 1 17 A user defined name for this port This means that up to DisplayString characters may be supported If less than then the name will be truncated in the connunit Syntax Access Status Return Value INTEGER r
191. tax Counter Access read only Status mandatory udpInErrors 1 3 6 1 2 1 7 3 The number of received UDP datagrams that could not be delivered for reasons other than the lack of an application at the destination port Syntax Counter Access read only Status mandatory 59047 10 D 3 43 3 MIB II Objects udpOutDatagrams 1 3 6 1 2 1 7 4 uu AAA udpOutDatagrams 1 3 6 1 2 1 7 4 The total number of UDP datagrams sent from this entity Syntax Counter Access read only Status mandatory The UDP Listener Table The UDP listener table contains information about this entity s UDP end points on which a local application is currently accepting datagrams udpLocalAddress 1 3 6 1 2 1 7 5 1 1 The local IP address for this UDP listener In the case of a UDP listener which is willing to accept datagrams for any IP interface associated with the Node the value 0 0 0 0 is used Syntax IpAddress Access read only Status mandatory udpLocalPort 1 3 6 1 2 1 7 5 1 2 The local port number for this UDP listener Syntax INTEGER 0 65535 Access read only Status mandatory 3 44 59047 10 D 3 MIB II Objects The EGP Group OO EET The EGP Group Implementation of the EGP group is mandatory for all systems which implement the EGP egpInMsgs 1 3 6 1 2 1 8 1 The number of EGP messages received without error Syntax Counter Access read only Status mandatory egpInErrors 1 3 6 1 2 1 8 2 The number of EGP messages received that pr
192. ted until the connection is disengaged either by an EOFdt or Link Reset Syntax Milliseconds Access read only Status current Return Value Unsupported Always returns error status NoSuchName 5 28 59047 10 D 5 Fabric Element MIB Objects Class 2 Accounting Table Tk Class 2 Accounting Table The objects described in this section are in table format indexed by switch index and port index An example of how to access one of these objects is snmpget localhost public fcFxPortC2InFrames 1 1 This table contains one entry for each FxPort in the Fabric Element and Counter32s for certain types of events that have occurred in the FxPorts since the management agent was re initialized fcFxPortC2InFrames 1 3 6 1 2 1 75 1 4 2 1 1 The number of Class 2 frames received by this FxPort from its attached NxPort Syntax Counter32 Access read only Status current Return Value The total number of Class2Framesin received by a port fcFxPortC2OutFrames 1 3 6 1 2 1 75 1 4 2 1 2 The number of Class 2 frames delivered through this FxPort to its attached NxPort Syntax Counter32 Access read only Status current Return Value The total number of Class2FramesOut sent by a port 59047 10 D 5 29 5 Fabric Element MIB Objects fcFxPortC2InOctets 1 3 6 1 2 1 75 1 4 2 1 3 E NN fcFxPortC2InOctets 1 3 6 1 2 1 75 1 4 2 1 3 The number of Class 2 frame octets including the frame delimiters received by this FxPort from its attached NxPort
193. the SNS table Syntax Access Status Return Value OCTET STRING SIZE 1 read only mandatory A value indicating the PortType for the entry in the name server table Refer to Table 4 27 for connUnitPortType port type return values Table 4 27 ConnUnitPortType State Return Values NL F NL NX FL Port Type i 2 3 7F 8 82 84 85 Return Value hexidecimal connUnitSnsPortIPAddress 1 3 6 1 3 94 5 2 1 1 11 The IPv6 formatted address of this entry in the SNS table Syntax Access Status Return Value 4 84 OCTET STRING SIZE 16 read only mandatory Unsupported Always returns error status NoSuchName 59047 10 D 4 Fibre Alliance MIB Objects connUnitSnsFabricPortName 1 3 6 1 3 94 5 2 1 1 12 OO CG connUnitSnsFabricPortName 1 3 6 1 3 94 5 2 1 1 12 The fabric port name of this entry in the SNS table Syntax FcNameld Access read only Status mandatory Return Value The switch port Port World Wide Name for the device in the name server table connUnitSnsHardAddress 1 3 6 1 3 94 5 2 1 1 13 The hard ALPA of this entry in the SNS table Syntax FcAddressld Access read only Status mandatory Return Value Unsupported Always returns error status NoSuchName connUnitSnsSymbolicPortName 1 3 6 1 3 94 5 2 1 1 14 The symbolic port name of this entry in the SNS table Syntax Access Status Return Value 59047 10 D DisplayString SIZE 0 79 read onl
194. this entity attempted to send This counter includes all those counted by icmpOutErrors Syntax Counter Access read only Status mandatory 3 32 59047 10 D 3 MIB II Objects icmpOutErrors 1 3 6 1 2 1 5 15 ae icmpOutErrors 1 3 6 1 2 1 5 15 The number of ICMP messages which this entity did not send due to problems discovered within ICMP such as a lack of buffers This value should not include errors discovered outside the ICMP layer such as the inability of IP to route the resultant datagram In some implementations there may be no types of errors which contribute to this counter s value Syntax Counter Access read only Status mandatory icmpOutDestUnreachs 1 3 6 1 2 1 5 16 The number of ICMP Destination Unreachable messages sent Syntax Counter Access read only Status mandatory icmpOutTimeExcds 1 3 6 1 2 1 5 17 The number of ICMP Time Exceeded messages sent Syntax Counter Access read only Status mandatory icmpOutParmProbs 1 3 6 1 2 1 5 18 The number of ICMP Parameter Problem messages sent Syntax Counter Access read only Status mandatory 59047 10 D 3 33 3 MIB II Objects icmpOutSrcQuenchs 1 3 6 1 2 1 5 19 SS SSS DN icmpOutSrcQuenchs 1 3 6 1 2 1 5 19 The number of ICMP Source Quench messages sent Syntax Counter Access read only Status mandatory icmpOutRedirects 1 3 6 1 2 1 5 20 The number of ICMP Redirect messages sent For a host this object will always be zero since hosts do not send redir
195. tion describes how to configure a QLogic switch to support SNMP The following topics are covered m System specifications and requirements H Configuring a switch using the Telnet command line interface Configuring a switch using the Enterprise Fabric Suite application System Specifications and Requirements QLogic switches support SNMPv1 and SNMPv2c Version 1 and 2 traps are supported Hardware one out of band Ethernet connection is required Software one switch management software application allows you to Q Monitor and control the switch J Read write and receive trap information if supported m Ports on the switch reserved for SNMP Q Port 161 is not configurable and is used for the standard SNMP commands Q Port 162 is configurable and is the default port used for traps E One or more in band switches can be managed by an out of band QLogic switch acting as a proxy switch QLogic can only act as a proxy for other QLogic switches QLogic proxy capability can be disabled 59047 10 D 2 1 2 Configuring a Switch Configuring a Switch Using the Command Line Interface AA NN Configuring a Switch Using the Command Line Interface The Telnet command line interface offers a convenient way to change SNMP parameters SNMP parameter defaults are preset during manufacturing For security purposes these default values should be changed For specific information about SNMP parameters refer to the SNMP Configurat
196. tioning properly m offline 2 the module is not available m testing 3 the module is under testing m faulty 4 the module is defective in some way Syntax INTEGER online 1 functional offline 2 not available testing 3 under testing faulty 4 defective Access read only Status Current Return Value The operational status of that module Table 5 2 Module Operational Status Return Values Mode Return Value online online 1 offline offline 2 diagnostics testing 3 other faulty 4 59047 10 D 5 5 5 Fabric Element MIB Objects fcFeModuleLastChange 1 3 6 1 2 1 75 1 1 4 1 5 E NN fcFeModuleLastChange 1 3 6 1 2 1 75 1 1 4 1 5 This object contains the value of sysUpTime when the module entered its current operational status A value of zero indicates that the operational status of the module has not changed since the agent last restarted Syntax TimeStamp Access read only Status Current Return Value Unsupported Always returns error status NoSuchName fcFeModuleFxPortCapacity 1 3 6 1 2 1 75 1 1 4 1 6 The number of FxPort that can be contained within the module Within each module the ports are uniquely numbered in the range from 1 to fcFeModuleFxPortCapacity inclusive However the numbers are not required to be contiguous Syntax FcFeFxPortCapacity Access read only Status current Return Value The total number of ports capability on the switch QLogic 5200 5600 Series 1 8
197. tions 5 1 MIB II 3 1 Module Table 5 4 N Notify 1 3 4 92 p Port Statistics Table 4 62 Index 6 Port Table 4 29 Q qlgcChFwDwldFileName 7 3 qlgcChFwDwldHostAddr 7 3 qlgcChFwDwldHostAddrType 7 2 qlgcChFwDwldHostPort 7 3 qlgcChFwDwldPathName 7 3 qlgcChFwOpRequest 7 2 qlgcChFwOpResult 7 2 qlgcChFwResetMethod 7 4 R Revision Table 4 20 revisionNumber 4 3 S Sensor Table 4 22 Simple Name Server Table 4 80 Simple Network Management Protocol 1 1 SNMP Group 3 54 snmpEnableAuthenTraps 3 61 snmpInASNParseErrs 3 55 snmpInBadCommunityNames 3 55 snmpInBadCommunityUses 3 55 snmpInBadValues 3 56 snmpInBadVersions 3 54 snmpInGenErrs 3 57 snmpInGetNexts 3 58 snmpInGetRequests 3 57 snmpInGetResponses 3 58 snmpInNoSuchNames 3 56 snmpInPkts 3 54 snmpInReadOnlys 3 56 snmpInSetRequests 3 58 snmpInTooBigs 3 55 snmpInTotalReqVars 3 57 snmplnTotalSetVars 3 57 snmpInTraps 3 58 59047 10 D Reference Guide Simple Network Management Protocol QLogic 3000 5000 9000 Series Fibre Channel Switch SESE snmpOutBadValues 3 59 snmpOutGenErrs 3 59 snmpOutGetNexts 3 60 snmpOutGetRequests 3 60 snmpOutGetResponses 3 60 snmpOutNoSuchNames 3 59 snmpOutPkts 3 54 snmpOutSetRequests 3 60 snmpOutTooBigs 3 59 snmpOutTraps 3 61 SNMPv1 1 1 SNMPv2c 1 1 Status Group 5 11 statusChangeTime 4 5 sysContact 3 3 sysDescr 3 2 sysLocation 3 4 sysName 3 3 sysObjectID 3 2 sysServices 3 4 System Group 3 1 systemURL 4 4 sysUpTime 3 3
198. tions in Table 5 1 are specific to the FE MIB and can be used in place of primitive data types Table 5 1 FA MIB Textual Substitutions Description Syntax MilliSeconds Unsigned32 MicroSeconds Unsigned32 FcNameld OCTET STRING SIZE 8 FcAddressld OCTET STRING SIZE 3 FcRxDataFieldSize Integer32 128 2112 FcBbCredit Integer32 0 32767 FephVersion Integer32 0 255 FcStackedConnMode INTEGER none 1 transparent 2 lockedDown 3 59047 10 D za 5 Fabric Element MIB Objects Configuration Group ee Table 5 1 FA MIB Textual Substitutions Description Syntax FcCosCap BITS classF 0 class1 1 class2 2 class3 3 class4 4 class5 5 class6 6 FcCosCap BITS classF 0 class1 1 class2 2 class3 3 class4 4 class5 5 class6 6 FcFeModuleCapacity Unsigned32 FcFeFxPortCapacity Unsigned32 FcFeModulelndex Unsigned32 FcFeFxPortIndex Unsigned32 FcFeNxPortIndex Integer32 1 126 FcBbCreditModel INTEGER regular 1 alternate 2 Configuration Group This group consists of scalar objects and tables It contains the configuration and service parameters of the Fabric Element and the FxPorts The group represents a set of parameters associated with the Fabric Element or an FxPort to support its NxPorts The objects described in this section are not in a table format An example of how to access one of these objects is snmpget localhost public fc
199. to fcFxPortEdtov 1 3 6 1 2 1 75 1 1 5 1 8 on page 5 9 for more information Syntax MilliSeconds Access read only Status Current Return Value The default is 10000 0x2710 fcFxPortEdtov 1 3 6 1 2 1 75 1 1 5 1 8 The E_D_TOV value configured for the FxPort The Error Detect Timeout Value is used as the timeout value for detecting an error condition Syntax MilliSeconds Access read only Status current Return Value The default is 2000 0x7D0 fcFxPortCosSupported 1 3 6 1 2 1 75 1 1 5 1 9 A value indicating the set of classes of service supported by the FxPort Syntax FcCosCap Access read only Status Current Return Value Always returns Class 3 2 and F 0xOD 59047 10 D 5 9 5 Fabric Element MIB Objects fcFxPortlntermixSupported 1 3 6 1 2 1 75 1 1 5 1 10 AA NN fcFxPortintermixSupported 1 3 6 1 2 1 75 1 1 5 1 10 A flag indicating whether or not the FxPort supports an Intermixed Dedicated Connection Syntax TruthValue Access read only Status current Return Value Always returns False 2 fcFxPortStackedConnMode 1 3 6 1 2 1 75 1 1 5 1 11 A value indicating the mode of Stacked Connect supported by the FxPort Syntax FeStackedConnMode Access read only Status current Return Value Always returns None 1 fcFxPortClass2SeqDeliv 1 3 6 1 2 1 75 1 1 5 1 12 A flag indicating whether or not Class 2 Sequential Delivery is supported by the FxPort Syntax TruthValue Access read only Status c
200. tric3 1 3 6 1 2 1 4 21 1 5 3 23 ipRouteMetric4 1 3 6 1 2 1 4 21 1 6 3 24 ipRouteNextHop 1 3 6 1 2 1 4 21 1 7 3 24 ipRouteType 1 3 6 1 2 1 4 21 1 8 3 25 ipRouteProto 1 3 6 1 2 1 4 21 1 9 3 25 ipRouteAge 1 3 6 1 2 1 4 21 1 10 3 25 ipRouteMask 1 3 6 1 2 1 4 21 1 11 3 26 ipRouteMetric5 1 3 6 1 2 1 4 21 1 12 3 26 ipRoutelnfo 1 3 6 1 2 1 4 21 1 13 3 26 The IP Address Translation Table 3 27 ipNetToMedialflndex 1 3 6 1 2 1 4 22 1 1 3 27 ipNetToMediaPhysAddress 1 3 6 1 2 11 4 22 1 2 3 27 ipNetToMediaNetAddress 1 3 6 1 2 1 4 22 1 3 3 28 ipNetToMediaType 1 3 6 1 2 1 4 22 1 4 3 28 Additional IP Objects 3 29 ipRoutingDiscards 1 3 6 1 2 1 4 23 3 29 The ICMP Group an 3 29 icmpinMsgs 1 3 6 1 2 1 5 1 3 29 icmplnErrors 1 3 6 1 2 1 5 2 3 29 icmpInDestUnreachs 1 3 6 1 2 1 5 3 3 30 59047 10 D v Reference Guide Simple Network Management Protocol QLogic 3000 5000 9000 Series Fibre Channel Switch icmpInTi
201. tting network datagrams this is the size of the largest network datagram that can be sent on the interface Syntax INTEGER Access read only Status mandatory 3 6 59047 10 D 3 MIB II Objects ifSpeed 1 3 6 1 2 1 2 2 1 5 TO MM ifSpeed 1 3 6 1 2 1 2 2 1 5 An estimate of the interface s current bandwidth in bits per second For interfaces that do not vary in bandwidth or for those where no accurate estimation can be made this object should contain the nominal bandwidth If the bandwidth of the interface is greater than the maximum value reportable by this object then this object reports its maximum value 4 294 967 295 and ifHighSpeed must be used to report the interface s speed Syntax Gauge Access read only Status mandatory ifPhysAddress 1 3 6 1 2 1 2 2 1 6 The interface s address at the protocol layer immediately below the network layer in the protocol stack For interfaces that do not have such an address such as a serial line this object should contain an octet string of zero length Syntax PhysAddress Access read only Status mandatory ifAdminStatus 1 3 6 1 2 1 2 2 1 7 The desired state of the interface The testing 3 state indicates that no operational packets can be passed Syntax INTEGER Access read only Status mandatory Return Value Writes not supported 59047 10 D 3 7 3 MIB II Objects ifOperStatus 1 3 6 1 2 1 2 2 1 8 EE ifOperStatus 1 3 6 1 2 1 2 2 1 8 The curren
202. twork Management Protocol QLogic 3000 5000 9000 Series Fibre Channel Switch xii Zone Table imenik a AA E a E a E E 4 54 connUnitZonelndex 1 3 6 1 3 94 1 13 1 1 4 54 connUnitZoneMemberlndex 1 3 6 1 3 94 1 13 1 2 4 54 connUnitZoneSetName 1 3 6 1 3 94 1 13 1 3 4 55 connUnitZoneSetNumZones 1 3 6 1 3 94 1 13 1 4 4 55 connUnitZoneName 1 3 6 1 3 94 1 13 1 5 4 55 connUnitZoneCapabilities 1 3 6 1 3 94 1 13 1 6 4 55 connUnitZoneEnforcementState 1 3 6 1 3 94 1 13 1 7 4 56 connUnitZoneAttributeBlock 1 3 6 1 3 94 1 13 1 8 4 56 connUnitZoneNumMembers 1 3 6 1 3 94 1 13 1 9 4 57 connUnitZoneMemberldType 1 3 6 1 3 94 1 13 1 10 4 57 connUnitZoneMemberlD 1 3 6 1 3 94 1 13 1 11 4 58 Zoning Alias Table 4 59 connUnitZoningAliasIndex 1 3 6 1 3 94 1 14 1 1 4 59 connUhnitZoningAliasMemberlndex 1 3 6 1 3 94 1 14 1 2 4 59 connUnitZoningAliasNumAliases 1 3 6 1 3 94 1 14 1 3 4 60 connUnitZoningAliasName 1 3 6 1 3 94 1 14 1 4 4 60 connUnitZoningAliasNumMembers 1 3 6 1 3 94 1 14 1 5 4 60 connUnitZoningAliasMemberldType 1 3 6 1 3 94 1 14 1 6 4 61 connUhnitZoningAliasMemberlD 1 3 6 1 3 94 1 14 1 7 4 61 POM Statistics IADIC ii ev Gls de cvin dahawudee ihe RU
203. urrent Return Value Always returns True 1 5 10 59047 10 D 5 Fabric Element MIB Objects fcFxPortClass3SeqDeliv 1 3 6 1 2 1 75 1 1 5 1 13 T O SESE fcFxPortClass3SeqDeliv 1 3 6 1 2 1 75 1 1 5 1 13 A flag indicating whether or not Class 3 Sequential Delivery is supported by the FxPort Syntax TruthValue Access read only Status current Return Value Always returns True 1 fcFxPortHoldTime 1 3 6 1 2 1 75 1 1 5 1 14 The maximum time in microseconds that the FxPort shall hold a frame before discarding the frame if it is unable to deliver the frame The value 0 means that the FxPort does not support this parameter Syntax MicroSeconds Access read only Status current Return Value The default ED TOV parameter is 2000 0x7D0 The Status Group The objects described in this section are in table format indexed by switch index and port index An example of how to access one of these objects is snmpget localhost public fcFxPortld 1 1 This group consists of tables that contain operational status and established service parameters for the Fabric Element and the attached NxPorts This group consists of tables that contains operational status and established service parameters for the Fabric Element and the attached NxPorts This table contains one entry for each FxPort and the operational status and parameters of the FxPorts 59047 10 D 5 11 5 Fabric Element MIB Objects fcFxPortID 1 3 6 1 2 1 75 1 2 1 1
204. us current qlgcChFwDwldPathName 1 3 6 1 4 1 3873 3 1 1 2 6 The full directory name on the server where the firmware file is located If the firmware file to be downloaded is in a subdirectory setting this path name to the name of that subdirectory is required Syntax DisplayString Access read write Status current qlgcChFwDwidFileName 1 3 6 1 4 1 3873 3 1 1 2 7 The filename of the firmware being transferred Syntax DisplayString Access read write Status current 59047 10 D 7 3 7 Firmware Download MIB Objects qlgcChFwResetMethod 1 3 6 1 4 1 3873 3 1 1 2 8 uu qlgcChFwResetMethod 1 3 6 1 4 1 3873 3 1 1 2 8 The value for the type of reset hot reset or hard reset Syntax INTEGER 1 Normal disruptive 2 NDCLA Non Disruptive Code Load Activation Access read write Status current 7 4 59047 10 D 8 Maintenance Panel Health Check MIB Objects This section covers the implementation details for the Maintenance Panel MP MIB QLGC MP MIB on the QLogic 9000 switches This MIB applies only to the QLogic 9000 switches Maintenance Panel MIB Definitions The Maintenance Panel MIB allows you to monitor the health of the maintenance panel This MIB consists of a single point status report object which reports the status of the EPROM ok alarm It also defines a trap which will be reported if the status changes qlgcMPStatus 1 3 6 1 4 1 3873 3 2 1 1 1 Represents the current status of eprom Syntax
205. various types of errors detected The management station may use the information in this group to determine the quality of the link between the FxPort and its attached NxPort The FxPort Error table contains one entry for each FxPort in the Fabric Element counters recording numbers of errors detected since the management agent re initialized The first 6 columnar objects after the port index corresponds to the counters in the Link Error Status Block fcFxPortLinkFailures 1 3 6 1 2 1 75 1 3 1 1 1 The number of link failures detected by this FxPort Syntax Counter32 Access read only Status current Return Value The total number of LinkFailures encountered for a port fcFxPortSyncLosses 1 3 6 1 2 1 75 1 3 1 1 2 The number of loss of synchronizations detected by the FxPort Syntax Counter32 Access read only Status current Return Value The total number of LossOfSyncs encountered for a port 59047 10 D 5 21 5 Fabric Element MIB Objects fcFxPortSigLosses 1 3 6 1 2 1 75 1 3 1 1 3 WAA NN fcFxPortSigLosses 1 3 6 1 2 1 75 1 3 1 1 3 The number of loss of signals detected by the FxPort Syntax Counter32 Access read only Status current Return Value Unsupported Always returns error status NoSuchName fcFxPortPrimSeqProtoErrors 1 3 6 1 2 1 75 1 3 1 1 4 The number of primitive sequence protocol errors detected by the FxPort Syntax Counter32 Access read only Status current Return Value The total number of PrimSegErrors encou
206. wer On Self Test POST Diagnostics that the switch chassis performs at start up Private Device A device that can communicate only with other devices on the same loop Private Loop A loop of private devices connected to a single switch port Read Community Read Community Authentication A write only field the value on the switch and the SNMP management server must be the same The default value is Public Request For Comment RFC Internet related specifications including standards experimental definitions infor mational documents and best practice definitions produced by the IETF Enterprise Fabric Suite Switch management application SFF Small Form Factor transceiver SFP Small Form Factor Pluggable A trans ceiver device smaller than a GigaBit Inter face Converter that plugs into the Fibre Channel port Glossary 3 Reference Guide Simple Network Management Protocol QLogic 3000 5000 9000 Series Fibre Channel Switch iii Simple Network Management Protocol The protocol governing network manage ment and that allows monitoring of network devices SMI Structure of Management Information Small Form Factor A transceiver device smaller than a GigaBit Interface Converter that is perma nently attached to the circuit board Small Form Factor Pluggable A transceiver device smaller than a GigaBit Interface Converter that plugs into the Fibre Channel port SNMP Simple Network Man
207. whether the agent removes an invalidated entry from the table Accordingly management workstations must be prepared to receive tabular information from agents that corresponds to entries not currently in use Proper interpretation of such entries requires examination of the relevant atPhysAddress object Syntax PhysAddress Access read write Status deprecated atNetAddress 1 3 6 1 2 1 3 1 1 3 The NetworkAddress corresponding to the media dependent physical address Syntax NetworkAddress Access read write Status deprecated 59047 10 D TE 3 MIB II Objects The IP Group AA NY The IP Group Implementation of the IP group is mandatory for all systems ipForwarding 1 3 6 1 2 1 4 1 The indication of whether this entity is acting as an IP Gateway with respect to the forwarding of datagrams received by but not addressed to this entity IP Gateways forward datagrams IP hosts do not except those source routed from the host For some managed Nodes this object may take on only a subset of the values possible Accordingly it is appropriate for an agent to return a badValue response if a management station attempts to change this object to an inappropriate value Syntax INTEGER Access read write Status mandatory Return Value Returns forwarding 1 Writes not supported ipDefaultTTL 1 3 6 1 2 1 4 2 The default value inserted into the Time To Live field of the IP header of datagrams originated at this entity whe
208. y mandatory The symbolic Port Name registered by the device in the name server table If not registered returns NULL 4 85 4 Fibre Alliance MIB Objects connUnitSnsSymbolicNodeName 1 3 6 1 3 94 5 2 1 1 15 AA NY connUnitSnsSymbolicNodeName 1 3 6 1 3 94 5 2 1 1 15 The symbolic Node name of this entry in the SNS table Syntax DisplayString SIZE 0 79 Access read only Status mandatory Return Value The symbolic Node Name registered by the device in the name server table If not registered returns NULL 4 86 59047 10 D 4 Fibre Alliance MIB Objects Platform Table ks Platform Table The Platform Table is a simple read only view of platform registration entries Platform registry is a service hosted by the connectivity unit in a very similar manner as the SNS table The platform table is contained by the connectivity unit A platform can register it s attrioutes and platform nodes with the registry service The platform table is a flat double indexed MIB table To keep the table simple only one platform management URL is exposed If a platform registers more than one management URL the first one is reported in this table This table is based on the fabric configuration server defined in the FC GS 3 standard and enhanced platform attributes proposed for FC GS 4 Note that the information contained in this table may only contain the platforms that this connUnit can see or it may contain a fabric wide view of the
Download Pdf Manuals
Related Search
Related Contents
Wagan 9751 User's Manual HP Officejet Pro K5300/K5400 Telegärtner T-SC Adaptor, Multimode Digital Psychrometer Models RH300 and RH305 (kit) Targus TSB80512AP Samsung SAMSUNG PL80 Uporabniški priročnik Copyright © All rights reserved.
Failed to retrieve file