Pico Macom TSMS-5/16RK Switch User Manual
Contents
1. Rack Mounted 14V 18V Satellite Multiswitch TSMS 5 16RK Satellite Multiswitch 4 PICO MACOM Front View POWER Rear View Specifications Frequency Range 40 2150 MHz Input Capability Antenna In 40 806 MHz 1 dB Compression Satellite In 950 2150MHz Antenna In 106 dBuV min at 67 25 MHz Input Satellite In 108 dBuV at 950 MHz Input Insertion Loss Antenna In 1 5 dB max 40 806 MHz LHCP RHCP Switching Point 14 0 15 0 Vdc Gain Satellite In 2 dB min 950 1750 MHz 0 dB min 1751 2150 MHz 22 KHz Switching Point 150 300mVp p Square Wave Test Signal Isolation Cross Polarization 25 dB min 950 2150 MHz Output 22KHz Signal 22 x4 KHz Out to Out 14 dB min 40 806 MHz 28 dB min 950 2150 MHz Characteristic Sat In to Sat In 35 dB min 950 2150 MHz Frequency Amplitude 650 250 mV p p Stop Band Attenuation 15 dB min Ant port 950 MHz Impedance 75 ohms All Ports 15 dB min Sat port 806 MHz Power Input 120 Vac 1096 60 Hz 140 mA Return Loss Input Output 5 dB min 40 806 MHz Dimensions 19 L x 5 5 D x 1 75 H 8 dB min 950 1450 MHz 6 dB min 1451 2150 MHz Weight 4 8 Ibs Ordering Information TSMS 5 16RK DIRECTV Phase 3 ODU Compatible 5 Input 16 Output Ph 800 421 6511 5 Rev 04 05 www picomacom com M Pico MACOM A STEREN COMPANY TSMS516RK Manual qxd 4 12 05 2 57 Page 6 Operation and Controls 4f PICO TSMS 5 1GRK Satellite Mul2. 8 Ph 800 421 6511 www picomacom com PICO Rev 04 05 STEREN COMPANY
3. from the RHCP port of a LNB to the LNB RHCP 14V port of the TSMS 5 16RK 6 Connect a cable from the LHCP port of a LNB to the LNB LHCP 18V port of the TSMS 5 16RK 7 Connect a cable from the RHCP port of a LNB to the LNB RHCP 14V 22KHz port of the TSMS 5 16RK 8 Connect a cable from the LHCP port of a LNB to the LNB LHCP 18V 22KHz port of the TSMS 5 16RK 9 If employing an off air antenna connect the antenna cable to the ANT IN port of the TSMS 5 16RK 10 Connect a receiver input directly to the OUT port of the unit if not using an off air antenna 11 If using an off air antenna connect the ANT SAT of a TSDM 2150 diplexer to the OUT port of the switch Connect a satellite receiver SAT IN to the SAT port and the satellite receiver ANT IN to the ANT Port of the TSDM 2150 12 Plug the power cord into a 120Vac 60Hz wall receptacle DSS DISH HENGE ANTENNA AND LNB 4f PICO Ph 800 421 6511 www picomacom com A STEREN COMPANY Installation Procedure 7 Rev 04 05 TSMS516RK Manual qxd 4 12 05 2 58 Page 8 Warranty 4f PICO Limited Warranty Pico Macom warrants to the original purchaser that all of its new products are of sound design quality materials and workmanship at the time of manufacture and will be free from related defects for one year from the original purchase date Pico Macom will repair or at its discretion replace without cost to the original purchaser the product w
4. or local power company 12 Power cord Protection Power supply cords should be routed so they are not likely to be walked on or pinched by items placed upon or against them Pay particular attention to cords and plugs convenience receptacles and the point where they exit from the appliance 13 Lightning For added protection for this product during a lightning storm or when it is left unattended or unused for long periods of time the unit should be disconnected from power source 14 Power Lines An outside antenna system should not be located in the vicinity of overhead power lines other electric light or power circuits where it can fall into such power lines or circuits When installing an outside antenna system extreme care should be taken to keep from touching such power lines or circuits as contact with them may be fatal 15 Overloading Do not overload wall outlets and extension cords as this can result in risk of fire or electric shock 16 Object and Liquid Entry Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock Never spill liquid of any kind on the product 17 Servicing Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other hazards Refer all servicing to qualified service personnel 18 Damage Requiring Service Unplug this pr
5. used in every SMATV application requiring satellite 950 2150MHz IF distribution The easy mount enclosure and all rear panel connections provide for rack mounting or quick and easy wall mounting by simply turning the unit face to the wall The TSMS 5 16RK is compatible with DIRECTV phase three dish reception systems by allowing 4 LNB inputs and 1 antenna and providing 16 outputs A constant 22 kHz tone is provided on 2 of the input ports and 14 or 18 dc volts are provided to power the LNB and conduct internal switching The TSMS 2150X 16A allows 2 LNB inputs and provides 16 outputs while the TSMS 2150X 8AUV allows 2 LNB inputs and 1 off air antenna input and provides 8 outputs The advanced circuit design incorporates a pin diode matrix to route any of the inputs to any of the outputs by utilizing the 13 14V Right Circular Vertical or 17 18V Left Circular Horizontal switching control supplied by the satellite receivers thus eliminating digital artifacts that result from mechanical relay switching To compensate for insertion loss all versions use separate built in amplifiers for satellite and or VHF UHF signals The TSMS 2150X series will supply power to the LNBs reducing heat build up within the multiswitch and prolong the life of the unit increasing unit life Ph 800 421 6511 www picomacom com M Pico macom A STEREN COMPANY TSMS516RK Manual qxd 4 12 05 2 57 PM Page 5 4f rico MACOM Specifications
6. ENNA GROUNDING ACCORDING NATIONAL ELECTRICAL CODE INSTRUCTIONS CONTAINED IN ARTICLE 810 RADIO AND TELEVISION EQUIPMENT SERVICE ENTRANCE CONDUCTORS STANDOFF b INSULATORS MAST SERVICE ANTENNA ENTRANCE LEAD IN WIRE EQUIPMENT ANTENNA c DISCHARGE UNIT TO EXTERNAL ANTENNA POWER SERVICE GROUNDING TERMINALS OF PRODUCT ELECTRODE SYSTEM e g interior metal water pipe GROUND WIRE GROUND CLAMPS OPTIONAL ANTENNA GROUNDING ELECTRODE DRIVEN 8 FEET 2 44M INTO THE EARTH IF REQUIRED BY LOCAL CODES SEE NEC SECTION 810 21 0 BONDING JUMPER provide some protection against voltage surges and built up static charges a Use No 10 AWG 5 3mm copper No 8 AWG 8 4mm alu minum No 7 AWG 10mm copper clad steel or bronze wire or larger as ground wire b Secure antenna lead in and ground wires to house with stand off insulators spaced from 4 feet 1 22m to 6 feet 1 83m apart c Mount antenna discharge unit as close as possible to where lead in enters house d A driven rod may be used as the grounding electrode where other types of electrode systems do not exist Refer to the National Electrical Code ANSI NFPA 70 1984 for information e Use jumper wire not smaller than No 6 AWG 13 3mm copper or equivalent when a separate antenna grounding electrode is used NOTE TO THE CATV SYSTEM INSTALLER THIS REMINDER IS PROVIDED TO CALL THE CATV SYSTEM INSTALLER S ATTENTION TO ARTICLE 820 22 OF
7. REFER SERVICING TO QUALIFIED PERSONNEL ONLY CAUTION PREVENT ELECTRIC SHOCK DO USE THIS POLARIZED PLUG WITH EXTENSION CORD RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE ATTENCION POUR PREVENIR LES CHOCS ELECTRIQUES NE PAS UTILISER CETTE FICHE POLARISEE AVEC UN PROLONGATEUR UNE PRISE DE COURANT OU UNE AUTRE SORTIE DE COURANT SAUF SI LES LAMES PEUVENT ETRE INSEREES A FOND SANS EN LAISSER AUCUNE PARTIE A DECOUVERT 1 Read Instructions All safety and operating instructions should be read before the appliance is operated 2 Retain Instructions The safety and operating instructions should be retained for future reference 3 Heed Warnings All warnings on the appliance should be adhered to 4 Follow Instructions All operating and user instructions should be followed 5 Cleaning Unplug this appliance from the wall outlet before clean ing Use a damp cloth for cleaning Do not use liquid cleaners or aerosol cleansers 6 Do Not Use Attachments Use of attachments not recommend ed by the manufacturer may cause hazards 7 Water and Moisture Do not use this product near water for example near a bathtub washbowl kitchen sink laundry tub in a wet basement or near a swimming pool and the like 2 Ph 800 421 6511 Rev 04 05 www picomacom com 8 Accessories Do not place this product on an unstable cart stand tripod bracket o
8. THE NEC THAT PROVIDES GUIDELINES FOR PROPER GROUNDING AND IN PARTICULAR SPECIFIES THAT THE CABLE GROUND SHALL BE CONNECTED TO THE GROUNDING SYSTEM OF THE BUILDING AS CLOSE TO THE POINT OF CABLE ENTRY AS PRACTICAL www picomacom com 3 Rev 04 05 TSMS516RK Manual qxd 4 12 05 2 57 PM Page Descriptions 4 M Pico macom Rack Mounted 14V 18V Satellite Multiswitch 4 Rev 04 05 Wide frequency range 40 2150MHz Compatible with All DIRECTV satellite dish reception systems including those with incorporated switching Simple interface design provides 2 or 4 satellite polarity inputs and 8 or 16 outputs for quick installation All rear panel connection access allows rack or wall mount flexibility PIN diode matrix reduces polarity transfer time and digital artifacts providing consistent picture quality Polarity is selected by receiver supplied voltage 14V 18VDC compatible with most DTH satellite services Antenna signal combines with satellite on output eliminating external combining reducing cost and clutter Built in DC power insertion reduces cost by providing for LNB power from the multiswitch Built in amplifier compensates for insertion losses reducing need of external amplification External UL Approved power supply reduces heat buildup thus TSMS 5 16RK Rack Mounted 14V 18V Satellite Multiswitch Pico Macom s TSMS 2150X Series rack mounted satellite multiswitches can be
9. TSMS516RK Manual qxd 4 12 05 2 56 Page 1 T 4f rico macom Installation and Operation Manual 4f rico Ph 800 421 6511 www picomacom com Nena A STEREN COMPANY Rev 04 05 TSMS516RK Manual qxd 4 12 05 2 56 PM Page 2 Safeguards 4f rico MACOM Product Inspection Inspect the equipment for shipping damage Should any damage be discovered immediately file a claim with the carrier Important Safety Instructions To insure proper installation and operation take a moment to read this guide before proceeding with the installation If you have any questions or comments about the TSMS 5 16RK Rack Mounted Satellite Multiswitch please contact your dealer or have him contact the PICO MACOM Service Center at these phone numbers 800 421 6511 818 493 4300 The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of un insulated dangerous voltage within the product s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons WARNING The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance servicing instructions in the literature accompanying the appliance TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE DO NOT OPEN THE CABINET
10. hich upon inspection by Pico Macom appears to be defective or not conforming to factory specifications Pico Macom will cover the cost of parts labor and return freight from factory Five Year Limited Warranty Most products designated as Headend Electronics are further covered by an extended 4 year period beyond the expiration of the original 1 year warranty for a full 5 year period Qualified equipment requiring factory repair during the extended 4 year period is covered under our re certification program Re certification fees under this program shall not to exceed 20 of the product s List Price and whenever possible Pico Macom will attempt to upgrade performance to the latest improved specification Warranty Limitations This warranty excludes coverage of damage or inoperability resulting from 1 use or installation other than in strict accordance with Pico Macom s written instruc tions 2 disassembly or repair by someone other than Pico Macom or a Pico Macom authorized repair center 3 misuse misapplication or abuse 4 alteration 5 lack of reasonable care or 6 wind ice snow rain lightning power surges or any other weather conditions or acts of God Pico Macom s warranty with respect to third party proprietary sub assembly modules and or private label products are limited to the duration and terms of third party vendors warranty Pico Macom shall in no event and under no circumstances be liable or responsible for any conse
11. oduct from the wall outlet and refer servicing to qualified service personnel under the following conditions a When the power supply cord or plug is damaged b If liquid has been spilled or objects have fallen into the product c If the product has been exposed to rain or water d If the product does not operate normally by following the oper ating instruction Adjust only those controls that are covered by the operating instructions An improper adjustment may result in damage and will often require extensive work by a qualified tech nician to restore the product to its normal operation e If the product has been dropped or the cabinet has been damaged f When the product exhibits a distinct change in performance this indicates a need for service 19 Replacement Parts When replacement parts are required be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original parts Unauthorized substitutes may result in fire electric shock or other hazards 20 Safety Check Upon completion of any service or repairs to this product ask the service technician to perform safety checks to deter mine that the product is in proper operating conditions 21 Outdoor Antenna Grounding Before attempting to install this product be sure the antenna or cable system is grounded so as to M Pico macom A STEREN COMPANY Ph 800 421 6511 EXAMPLE OF ANT
12. quential indirect incidental punitive direct or special damages based upon breach of warranty breach of contract negligence strict tort liability or otherwise or any other legal theory arising directly or indirectly from the sale use installa tion or failure of any product acquired by buyer from Pico Macom This limited warranty extends to the original purchaser Pico Macom reserves the right to modify or discontinue this warranty at Pico Macom s sole discretion without notification No other warrantees are expressed or implied Uptime Loaner Program Our Uptime loaner program is designed to provide domestic users of our headend products and commercial systems the best possible support and service This program is established to minimize downtime resulting from equipment failure in critical service situations We offer this program free of charge excluding freight to qualified purchasers within the warranty period The program provides a free equipment loan of like qualified equipment enabling seamless operation for the time required to repair and return the unit The process is simple Call our Customer Service desk requesting a return merchandise authorization RMA number for the failed equipment and ask for a loan er unit We will issue an invoice for the List Price of the loaner unit plus shipping costs When you receive the loaner unit pack the failed unit in the loaner unit s box and ship it freight prepaid to Pico Macom for repair When
13. r table The product may fall causing serious injury to a child or adult and serious damage to the appliance 9 Ventilation This video product should never be placed near or over a radiator or heat register This video product should not be placed in a built in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer s instructions have been adhered to Any slots or opening in the cabinet are provided for ventilation To ensure reliable operation of the video product and to protect it from overheating these openings must not be blocked or covered Openings should never be blocked by placing the product on a bed sofa rug or other similar surface 10 Grounding or Polarization This video product is equipped with either a three prong plug for 110 VAC use or a two prong flat blade 220 volt type plug Each type is to be inserted into only the type of receptacle for which they specifically designed Do not cut off the round grounding pin in order to be able to fit into a two prong recep tacle as this could cause injury and will void the warranty 4f Pico macom A STEREN COMPANY TSMS516RK Manual qxd 4 12 05 2 57 PM Page 3 4f rico MACOM Safeguards 11 Power Sources This product should be operated only from the type of power source indicated on the marking label If you are not sure of the type of power supplied to your home consult your appli ance dealer
14. tiswitch M Pico macom Front Panel DSS DISH UHF VHF ANTENNA AND LNB Back Panel Control 1 18V 22KHz 5 ANT IN Connect the 18Vdc 22 KHz output of a LNB to this port Connect the cable from a off air antenna to this port 2 14V 22KHz 6 OUT Connect the 14Vdc 22 KHz output of a LNB to this port Connect a satellite receiver to this port If an off air antenna is employed insert a TSDM 2150 diplexer between the OUT 3 18V OKHz port and the receiver input Connect the 18Vdc OKHz output of a LNB to this port 7 Power Cord 4 14V OKHz Insert the power cord into a 3 prong 120Vac 60Hz Connect the 14Vdc OKHz output of a LNB to this port receptacle only 6 Ph 800 421 6511 www picomacom com PICO Rev 04 05 STEREN COMPANY 4f rico MACOM TSMS516RK Manual qxd 4 12 05 2 58 PM Page 7 Installation It is recommended that assistance be available to safely install equipment in equipment racks 1 Install chassis in equipment rack equipment rack sold separately by supporting the bottom and rear of TSMS 5 16RK at the desired elevation in rack 2 Line up the side holes of chassis with the tapped equipment rack holes 3 Insert the provided screws through the mounting holes at the extreme left and right of faceplate and thread into the tapped equipment rack holes 4 Fasten the bottom screws first then fasten top screws tighten securely 5 Connect a cable
15. u must report claims for loss or damage within 3 days of delivery while claims for erroneous charges or price corrections must be presented within 30 days of invoice date Returning Shipped Items To return any shipped items including those shipped for warranty repairs or credit call our Customer Service desk to request a Return Merchandise Authorization RMA number Please reference the original invoice number and purchase date and product serial number if any Be certain to mark the RMA number on the package boldly and legibly Unless we specify a different carrier please ship your returned items to us via UPS freight prepaid and fully insured If returned for credit we will promptly process your request upon receipt of your return order PICO MACOM Our Return Policy Your Satisfaction Guaranteed Our goal is your complete satisfaction If for any reason our products were not quite what you anticipated simply call your customer service rep and we will be happy to assist you in replacing or returning the order You may return current non discontinued items for full credit for up to 30 days from invoice date Our requirements are simple Excepting defective items the products must be returned in their original packaging and in re salable condition Restocking fees may otherwise apply beyond this period or if products are not returned in their original condition Please contact your customer service rep for more information WARRANTY
16. you receive the repaired unit a new RMA number will be provided in the box Carefully pack the loaner unit and affix the new RMA number on the box and ship it back to us for full credit excluding shipping costs To qualify for the program you must have current open terms with us and in good standing We must receive your failed unit within one week after the loaner unit is shipped to you and must likewise receive the loaner unit within one week after the repaired unit is shipped back to you Daily rental fees not to exceed 10 of the equipment s List Price will apply beyond one week after the loaner or repaired unit are shipped to you Other limitations may apply so please call us for addi tional information on qualifying equipment and procedures Pico Macom reserves the right to modify or discontinue the Uptime Loaner Program at any time and at its sole discretion Damage or Shortage Claims Our shipping staff carefully packs and ships your orders in compliance with common carriers requirements Please make note of any obvious damage or shortage on the freight bill or carrier s receipt next to your signature The carrier s agent must too sign acknowledging the loss Failure to do so may result in the carrier s refusal to honor the claim Please open your order immediately upon receipt to check for concealed damage and compare the packing list to the items shipped If damaged keep the original shipping cartons for possible inspection by the carrier Yo
Download Pdf Manuals
Related Search