Philips 28PW6108/01 Flat Panel Television User Manual
Contents
1. Introduction Thank you for purchasing this television set This handbook has been designed to help you install and operate your TV set We would strongly recommend that you read it thoroughly We hope our technology meets entirely with your satisfaction Table of Contents of Contents Installation Installing your television set 4 csndedieed onnetiageoadacdeeicuiercnicuees 2 The keys on the TV set ssssssressissxssnssareisss ek ekio k dis Eek Eaa 2 The remote control keys o1644hoeeenrantatianrensese tenet eee EARS 3 Quick nstallaton ssiseiseisenrdin bos 6 04 95 5 WS 6 OF 5 44 EEE beter bas 4 DOr tine PROS aes 2 244 04444 b ouastese anr oes o4e56 ees dongs 554560044 4 Sie oher Menis Sictcencoutesecaey soon Get teas a 5 Choosing a language and country lt lt o 6is480 404646 4ledasreiwncsaved 5 Automatic tnne citGebceetencasteee cen siie iki kike e ae 5 P U enean eara Er e EE E E A essa gs A E E E E 6 Prop aIINIG NaNe serisi i titti iii 52s ii E E E DE 6 Operation Adjusting the picture spreriiorkerdepkeskes beki ki iiin iriieirka rks 7 Pottinn e PICT rosreciiitrirekriii neret nes euni Narui 7 S A le E ae E ee E ee ee T eee EE ee ee 7 Adjusting the SOUNG ersrreisciprrrri ibri kaiari a aniani e aieia 8 Adjusting the sound level css sccscsswe oe ceo seh SS Reet Sener See teensy eee 8 SURFOUNG IMNOUES 4 ak dined ned lee dada rowed OOO eR EF okt RRE EREEREER 9 Timer CUO 2232440 5 a65 cates cue lea one Gee bose eee es eee 10 Locking T2. If the menu does not appear hold down the lt 1 and lt 1 keys on the set for 5 seconds to start the tuning The operation takes several minutes A display shows the search status and the number of programmes found When it has finished the menu disappears To exit or interrupt the search press the D key lf no programmes are found refer to the chapter entitled Tips on p 18 If the transmitter or the cable network broadcasts the automatic sort signal the programmes will be correctly numbered If not the programmes found will be numbered in descending order starting at 99 98 97 etc Use the SORT menu to renumber them Some transmitters or cable networks broadcast their own sort parameters region language etc Where this is the case make your choice using the Q keys and confirm with See also EasyLink function page 7 t Sorting programmes programmes Press the key The main menu is displayed Select INSTALL then press The INSTALL menu appears PICTURE INSTALL SOUND e LANGUAGE FROM e COUNTRY TO AUTO STORE e MANUAL STORE EXCHANGE Using the O key select SORT then press The SORT menu appears The FROM option is activated Note this menu works as follows e Change FROM enter the current programme number e TO enter the new number EXCHANGE numbers the operation is carried out Select the programme you wish to renum
3. does not have a euroconnector socket the only connection possible is via the aerial cable You will therefore need to tune in your video recorder s test signal and assign it programme number O refer to manual store p 6 To reproduce the video recorder picture press 0 Video recorder with decoder Connect the decoder to the second euroconnector socket of the video recorder You will then be able to record scrambled transmissions Satellite receiver decoder CDV games etc Carry out the connections featured opposite To optimise picture quality connect the equipment which produces the RGB signals digital decoder games etc to EXT1 and the equipment which produces the S VHS signals S VHS and Hi 8 video recorders certain DVD drives to EXT2 and all other equipment to either EXT1 or EXT2 To connect to a hi fi system use an audio connection cable and connect the L and R outputs on the TV set to the AUDIO IN L and R input on your hi fi amplifier The surround sound output can be used to connect active loudspeakers to reproduce the rear surround effect To select connected equipment Press the C key to select EXT1 EXT2 S VHS2 S VHS signals from the EXT2 socket and EXT3 or S VHS3 for connections on the front panel Most equipment decoder video recorder carries out the switching itself 14 Connecting other appliances Carry out the connections featured opposite Using the G g
4. the dark areas are made darker whilst maintaining the detail Standby To set the TV to standby mode To switch the TV set on again press P or D key not used Numerical keys For direct access to programmes For a 2 digit programme number the 2 digit must be entered before the dash disappears Smart picture controls To access a series of settings RICH NATURAL SOFT MULTIMEDIA and return to PERSONAL Surround sound To select the different surround modes see p 9 Selecting TV programmes To move up or down a programme The number the name and the sound mode are displayed for a few seconds For some TV programmes the title of the programme appears at the bottom of the screen Screen information To display remove the programme number the name if it exists the time the sound mode and the time remaining on the timer Hold down for 5 seconds to permanently display the programme number on the screen The volume level and the smart control adjustments are then displayed each time they are used Previous programme To access the previously viewed programme 16 9 formats p 12 Quick installation installation The first time you switch on the television a menu appears on the screen and the tuning starts automatically SELECT LANGUAGE LANGUAGE COUNTRY AUSTRIA DANSK BELGIUM SEARCHING NEDERLANDS SWITZERLAND MMSN PROG NO 2 215 18 MHZ FINNISH GERMANY FRANCAIS DENMARK
5. AQ to choose the characters Press ten when the name has been entered The programme name is stored See also EasyLink function page 7 Repeat steps to for each programme to be named To exit from the menus press CD Adjusting the picture the picture Press E then Description of the settings The PICTURE menu appears e BRIGHTNESS alters the brightness of the image bias e COLOUR alters the colour intensity STEA TURES spm 39 e CONTRAST alters the variation between las tebe light and dark tones e CONTRAST amp j e SHARPNESS e SHARPNESS alters the crispness of the image o e STORE stores the picture settings e COLOUR TEMP colour temperature adjusts the colour temperature of the Use OQ keys to select a setting and OC picture Three options are available here keys to adjust COOL blue white NORMAL balanced or Note the menu is a scroll down menu WARM red white Keep the key O held down to access the settings e NR Noise Reduction alleviates fuzziness hidden at the bottom of the screen snowy picture This setting is useful when Once the necessary adjustments have been reception is difficult made select the option STORE and press to store them To exit from the menus press O Rotating the picture only available on certain versions Larger screens are sensitive to variations in The FEATURES menu appears the earth s magnetic field This setting makes it Use
6. IE SEl t255545ceeederses 645 646085606006045055055556004006 10 i ee eee eee ee eee eee CT ee ee ee eee ee er ee eee Te 11 WG 7 Aae app oe ga bese ooh ee bed oe Hee beta eteae es ceeeiedes 12 Peripherals VACO TOCO 64406595456 0 49ce oes 4 a one ee 4 ie eek shes eededs 14 Other equipment 24 25 5654 256 16435552544646 46150666464 5056552042452 14 To select connected equipment 6 ee eee ee tence ees 14 Connecting Other appliances 24 ci24s6 0840 5 62 Fas ceneeseeeessewsareas 15 TViy CR DVD mode selector 20n 2cns0n nee niwscredeessewese need oene 15 Wireless surround speaker system cece eee eee eee eees 16 Installation of the wireless system Philips AD9O02W 00005 16 Adjusting the surround speakers 0 cee e een e eee 17 Practical information GIS 3 6k oo oa oe ee 17 TPE 208 23 02325065440055 080s soe eee eae eau cen eeueees eee RES te 18 information for users in the UK 2 22 s42005 4 462 04645 2004 065 S64 56S46hen 19 aah Installing your television set Positioning the television set Place your TV on a solid stable surface leaving a space of at least 5 cm around the appliance To avoid accidents do not put anything on the set such as a cloth or cover a container full of liquid vase or a heat source lamp The set must not be exposed to water Connections e Insert the aerial plug into the IF socket at the rear of the set e Insert the mains plug into a wall soc
7. Remove fuse cover and fuse 2 Fit new fuse which should be a BS1362 5A A S T A or BSI approved type 3 Refit the fuse cover In order to maintain conformity to the EMC directive the mains plug on this product must not be removed Connecting the aerial The aerial should be connected to the socket marked IP at the back of the set An inferior aerial is likely to result in a poor perhaps unstable picture with ghost images and lack of contrast Make shift loft or set top aerials are often inadequate Your dealer will know from experience the most suitable type for your locality Should you wish to use the set in conjunction with other equipment which connects to the aerial socket such as TV games or a video camera it is recommended that these be connected via a combiner unit to avoid repeated connection and disconnection of the aerial plug Fitting the stand if provided Use only the stand provided with the set making sure that the fixings are properly tightened A diagram showing how to assemble the stand is packed with the stand Never use a make shift stand or legs fixed with woodscrews 19 VTIP L 9ST LLLE 6 91 Aqq OLY
8. ber using ODO keys or 0 to 9 Example to renumber programme 78 as 2 press Select TO using key and enter the new number with OO keys or 0 to O for the example given enter 2 Select EXCHANGE Q key and press The message EXCHANGED appears the exchange takes place In our example programme 78 is renumbered as 2 and programme 2 as 78 Select the option FROM key and repeat stages O to O as many times as there are programmes to renumber See also EasyLink function page 7 To exit from the menus press O Using other menus PICTURE 7 Choosing a language and country Press the D key to display the main menu Press to go into the LANGUAGE menu Select INSTALL Q then press Select your language with the OV keys The INSTALL menu appears The menus will appear in the chosen language The LANGUAGE option is activated O Press to exit the LANGUAGE menu Select the option COUNTRY and press C gt ee INSTALL Select your country with OQ keys e SOUND If your country does not appear in the list select e FEATURES e LANGUAGE ENGLISH TES DANEK OTHER Press to exit the COUNTRY menu To exit from the menus press O See also EasyLink function page 7 e AUTO STORE NEDERLANDS e MANUAL STORE e SORT oo Automatic tuning tuning This menu allows you to automatically search If the transmitter or the cable network for all the programmes available in your regi
9. een Set SURROUND to ON to activate the sound made select the option STORE and press C gt RF transmission to store them Select AUDIO CHANNEL and select the To exit from the menus press same channel as you selected on the active C EasyLink NICAM sound Digital link between the set and the video Process by which digital sound can be recorder which allows a direct transfer of transmitted certain information such as channel setting Systent RGB Signals Television pictures are not broadcast in the These are 3 Red Green and Blue video same way in all countries There are different signals which directly drive the red green and standards BG DK l and LL The SYSTEM blue emitters in the cathode ray tube Using setting p 6 is used to select these different these signals provides better picture quality standards This is not to be confused with PAL or SECAM colour coding Pal is used in the majority of European countries Secam in France the CIS and the majority of African countries The United States and Japan use a different system called NTSC The inputs EXT1 and EXT2 are used to read NTSC coded recordings S VHS Signals These are 2 separate Y C video signals from the S VHS and Hi 8 recording standards The luminance signals Y black and white and chrominance signals C colour are recorded separately on the tape This provides better picture quality than with standard video VHS and 8 mm wh
10. ere the 16 9 Y C signals are combined to provide only Refers to the ration between the length and one video signal height of the screen Wide screen televisions have a ration of 16 9 conventional screen TV sets have a ration of 4 3 17 The proximity of mountains or high buildings may be responsible for ghost pictures echoing or shadows In this case try manually adjusting your picture see fine tuning p 6 or modify the orientation of the outside aerial Does your antenna enable you to receive broadcasts in this frequency range UHF or VHF band In the event of difficult reception snowy picture switch the NR on the PICTURE menu to ON p 7 No picture Have you connected the aerial socket properly Have you chosen the right system p 6 Poorly connected euroconnector cables or aerial sockets are often the cause of picture or sound problems sometimes the connectors can become half disconnected if the TV set is moved or turned Check all connections Peripheral equipment gives a black and white picture You have not selected the right socket with the key S VHS2 S VHS3 instead of EXT2 EXT3 To play a video cassette check that it has been recorded under the same standard PAL SECAM NTSC which can be replayed by the video recorder No sound If on certain channels you receive a picture but no sound this means that you do not have the correct TV system Modify the SYSTEM setting p 6 Recycli
11. in option with a wireless surround speaker system reference AD902VWV With this system the DOLBY PRO LOGIC and HALL SURROUND modes are now availables see p 9 For more informations about this system contact your dealer You can also connect active loudspeakers see p 14 This system include a Wireless RF transmitter to be clicked to the back of the TV an active loudspeaker including the RF receiver the mains supply a power switch a connector clip and a channel selector located on the underside a passive loudspeaker to be connected to the active loudspeaker a speaker cable Installation of the wireless system Philips AD902W z After switching off the television connect the RF F ites transmitter to the connector located on the back of ii the set Then click the module to the back of the TV as shown opposite Ui H P Dispose the 2 loudspeakers at the rear and on either all side of the listener Connect the active to the passive a loudspeaker with the supplied cable according to the a a polarity the on the and the on the Connect lg i E the active loudspeaker to the mains 220 240 V 50 Hz a with the mains cable At the bottom of the active loudspeaker set the slide channel to channel 1 Switch on the active speaker with the power switch The indicator at the front of the active speaker lights up in red when the speaker is in standby and in green when there is a sou
12. ings press te To remove these settings hold down for 5 seconds 11 16 9 Formats 6 9 Formats The pictures you receive may be transmitted in 16 9 format wide screen or 4 3 format conventional screen 4 3 pictures sometimes have a black band at the top and bottom of the screen letterbox format This function allows you to optimise the picture display on screen Automatic switching This TV set is also equipped with automatic switching which will select the correct screen format provided the specific signals are transmitted with the programmes This automatic format can olso be modified manually Using the different screen formats Press the key or to select the different modes 4 3 ZOOM 14 9 ZOOM 16 9 SUBTITLE ZOOM SUPER ZOOM and WIDE SCREEN You can also access these settings with key CTD 4 3 Mode The picture is reproduced in 4 3 format and a black band is displayed on either side of the picture The picture may be progressively enlarged using the OQ keys ZOOM 14 9 Mode The picture is enlarged to 14 9 format a thin black band remains on both sides of the picture The OQ keys allow you to compress vertically the image to view the top or the bottom of the picture subtitles ZOOM 16 9 Mode The picture is enlarged to 16 9 format This mode is recommended when displaying pictures which have black bands at the top and bottom letterbox format Use the OQ keys if you wish to display the top or the b
13. isplayed in green preceded by the symbol gt lt or lt PB Use the keys COC to directly access the sub pages of your choice Direct access to subject headings Coloured zones are displayed at the bottom of the screen The 4 coloured keys give access to the corresponding subjects or pages The coloured zones flash when the subject or the page is not yet available Page enlargement Press this key to display the upper then lower part of the screen and then to return to the normal page size Reveal Use this key to reveal conceal hidden information answers to puzzles Overlaying text on the TV picture To activate or deactivate screen overlay Double page teletext To activate or deactivate the double page teletext display mode The active page is displayed on the left and the following page is displayed on the right Press if you want to hold a page i e the contents page The active page is then displayed on the right To return to normal mode press GD Favourite pages For teletext programmes 1 to 40 you can store 4 favourite pages which you can then access via the coloured keys red green yellow blue Press ev Enter the number of the page required Press then the coloured key of your choice The page is stored Repeat steps and for the other coloured keys From now on when you consult teletext your favourite pages appear in colour at the bottom of the screen To get back to the normal subject head
14. ket 220 240V 50 Hz Surround loudspeakers You can connect in option 2 surround loudspeakers For more information see page 16 Remote control Insert the two R6 type batteries supplied making sure that they are the right way round Check that the mode selector is set to TV The batteries supplied with this appliance do not contain mercury or nickel cadmium If you have access to a recycling facility please do not discard your used batteries if in doubt consult your dealer When the batteries are replaced use the same type Switching on To switch on the set press the on off key A red indicator comes on and the screen lights up Go straight to the chapter Quick installation on page 4 If the television remains in standby mode press P on the remote control The indicator will flashe when you use the remote control The keys on the TV set keys on the TV set The television set has 4 keys which are located on the front or the top of the set depending on the model TheVOLUME lt 1 keys are used to adjust sound levels The PROGRAM P keys are used to select the required programmes To access the menus simultaneously hold down the lt 1 and lt 1 keys The PROGRAM keys may then be used to select an adjustment and the lt 1 keys to make that adjustment To exit from the menus hold down the 2 lt 1 and lt 1 keys Note when the CHILD LOCK functio
15. key to select ROTATION and use possible to compensate for this phenomenon COC keys to alter the angle of the image Press n Press to exit from the menus Select FEATURES and press t EasyLink function function If the set is connected by the EXT2 socket Press te key to a video equipped with the EasyLink Select OPTIONS and press C gt The function the language country and channels OPTIONS menu is displayed found are automatically transmitted to the Use key to select EASY LINK and press video recorder at the time of installation to set it to ON If your video recorder is not A message is displayed on screen during equipped with this function set to OFF loading The list of video recorder channels is Press to exit the menus then the same as those of the set The EASY LINK setting is set to ON by default You must first check in the menus that the Easylink function is activated Adjusting the sound the sound Press en select the SOUND option Q and Description of the settings press gt The SOUND menu appears e LEVEL to balance the sound between the different speakers see below SOUND e EQUALIZER to adjust the sound tone from SOUND La H bass 120 Hz to treble 10 kHz SINSTAEL e SURROUND MODE 1500 HZ e SURROUND MODE to select the different Aea aaa ae surround modes see next page e DELTA VOLUME volume difference allows you to compensate for the vol
16. l of each k souno TEST h hind dently Th S S EQUALIZER BAL A N E channel independently The sequence stops SARIE e SURROUND MODE CENTRE while the level is being changed and then SOUND e DELTA VOLUME REAR call e STORE automatically starts up again To stop the test press Mn Levels may also be adjusted without using the test signal Select TEST and press to set it to ON To exit from the menus press A continuous sound is emitted in turn from each channel left right centre and rear Surround modes modes surround modes This menu allows you to select the different Use the OQ keys to select the relevant surround mode STEREO DOLBY 3 STEREO Press select SOUND and press 3D SURROUND HALL SURROUND and The SOUND menu appears DOLBY PROLOGIC For each setting the Select SURROUND MODE and press C gt The menu appears active loudspeakers are displayed on screen Remark the DOLBY PRO LOGIC and HALL SURROUND modes are only availables if surround loudspeakers are connected to the IV set 3D SURROUND S o a op To exit from the menus press D ENNE DOLBY PRO LOGIC This TV set is also equipped with automatic e DELTA VOLUME STEREO DOLDY 3 SEES switching which will select the correct surround mode provided the specific signals are transmitted with the programmes This automatic format can also be modified manually with the key Description of the different surro
17. lock to ON Switch off the set and put the remote control out of sight The set cannot be used it can only be switched on using the remote control To cancel switch CHILD LOCK to OFF Teletext Teletext is an information system broadcast by certain channels which can be read like a newspaper It also provides subtitles for people with hearing difficulties or those who are unfamiliar with the language in which a particular programme is being broadcast cable networks satellite channels etc Switch teletext on off To call up or exit from teletext When first pressed the main index page appears with a list of the items available Each page has a corresponding 3 figure number If the selected channel does not broadcast teletext 100 will appear and the screen will remain blank in this case exit from teletext and choose another channel Selecting a teletext page Use keys 0 to 9 or OQ or P to enter the page number required For example for page 120 press 1 2 0 The number is displayed in the top left hand corner the page counter starts searching and the page is displayed Repeat the procedure to consult another page If the counter continues searching this means that the selected page is not broadcast Choose another number Direct selection of sub pages Certain pages contain sub pages for example page 120 contains sub pages 1 3 2 3 and 3 3 If this is the case the page number is d
18. m the menu Except for France standard LL select the option FRANCE Manual tuning tuning Select SEARCH and press OQ The search begins As soon as a programme is found the search will stop If you know the frequency of the programme required enter its number directly using the OIO keys and go to step If no programme is found refer to the Tips chapter on page 18 If reception is un satisfactory select FINE TUNE and hold down or key Select PROG NO programme number and use the O or 0 to 9 keys to enter the desired number Select STORE and press gt The message STORED appears The programme is stored See also EasyLink function page 7 Repeat steps to for each programme to be stored To exit press the key t Programme name name You may if you wish give a name to the first 40 programmes from 1 to 40 Press te Select INSTALL then press The INSTALL menu appears Press Q 5 times to select NAME concealed at the bottom of the screen then press The menu appears INSTALL e COUNTRY e AUTO STORE e MANUAL STORE SORT eS NAME SO BBC OQ Select the programme you wish to name using the keys 0 9 or P Note at the time of installation the programmes are automatically named when the identification signal is transmitted Use the keys OC to move within the name display area 5 characters Use keys
19. n is activated these keys are unavailable refer to FEATURES menu on page 8 List of programmes To display clear the list of programmes Use the keys to select a programme and the key to display it The symbol is displayed alongside all programmes which are locked p 10 or oh if they are not locked Sleeptimer To select the length of time before the set automatically switches to standby from 0 to 240 minutes Select EXT sockets Press several times to select EXT1 EXT2 and EXT3 S VHS2 and S VHS3 Mode selector p 15 To activate the remote control in TV VCR video recorder or DVD mode Smart sound controls To access a series of settings VOICE MUSIC THEATRE and return to PERSONAL Menu To display or exit from the menus Cursor These 4 keys are used to move within the menus or to have direct access to the 16 9 formats p 12 Volume To adjust the sound level Mute To disable or enable the sound Teletext features p 11 Sound mode To switch from STEREO to MONO or to choose between Dual and Dual II for bilingual transmissions For TV sets fitted with NICAM reception depending on the transmission you can switch from NICAM STEREO to MONO or choose between NICAM DUAL I NICAM DUAL II and MONO When the sound mode is switched to MONO the indication is displayed in red The remote control keys Contrast To activate de activate the automatic contrast adjustment system
20. nd transmission It turns back to red standby when the tv is switched off or when the rear channel is not used in the case of STEREO 3 STEREO and 3D SURROUND modes You have now to proceed to the surround speaker adjustments in the TV menus see next page 16 Adjusting the surround speakers To use the surround speakers you have first to loudspeaker channel 1 has been selected as proceed to the folowing adjustments the factory default If you should get Remark theses menus are only available when interferences from external RF equipment surround speakers are connected to the set such a wireless headphone mobile phone Switch on the television it may be necessary to shift to another Press the key channel In practice only 2 or 3 channels are Select SOUND Q and press available because a step of at least 2 channels Select CORDLESS hidden at the bottom are necessary to have enough separation of the screen and press gt The menu appears Always be shure that the active speaker and the cordless setting are switched to the same channel SOUND Otherwise no sound or only distorted sound will be SOUND e STORE SURROUND ear ee AVL AUDIO CHANNEL Press te to go back to the SOUND menu and e INSTALL select DELAY hidden at the bottom of the screen You can adjust if you wish the delay of the surround effect 31 is the default value Once the necessary adjustments have b
21. ng Tirs Poor reception The surround speakers are producing no sound or distorted sound Check that the active speaker and the cordless setting are switched to the same channel p 17 Check also that the active speaker indicator lights in green see step 3 page 16 and that the SURROUND menu is set to ON p 17 The remote control no longer works Check that the mode selector on the side of the remote control is set to TV The TV set does not react to the remote control the indicator on the set no longer flashes when you use the remote control Replace the batteries Standby When you switch the TV set on it remains in standby mode and the indication LOCKED is displayed when you use the keys on the TV set The CHILD LOCK function is switched on p 8 If the set receives no signal for 15 mins it automatically goes into standby mode To save power your set is fitted with components that give it a very low power consumption when in standby mode less than 3 VV Cleaning the set Only use a clean soft and lint free cloth to clean the screen and the casing of your set Do not use alcohol based or solvent based products Sall no results If your TV set breaks down never attempt to repair it yourself contact your dealer s after sales service The materials used in your set are either reusable or can be recycled To minimise environmental waste specialist companies collect used appliances and dismantle them afte
22. ogrammes or completely lock the set by locking the keys Locking programmes Press n Select FEATURES and press Select PARENTAL CONT and press C gt FEATURES e PICTURE e SOUND e TIMER E e CHILD LOCK e PARENTAL CONT e ROTATION a00 070 3 Enter your confidential access code The first time enter the code 0711 then confirm by re entering 0711 The menu appears Press to go into the menu Use keys OQ to select the required programme and confirm with C gt The symbol A is displayed alongside the programmes or sockets that have been locked Press to exit To watch a programme which has been locked you will now need to enter the confidential 10 code otherwise the screen will remain blank The INSTALL menu access is also locked Caution in the case of encrypted programmes which use an external decoder it is necessary to lock the corresponding EXT socket To unlock all programmes Repeat stages to O above then select CLEAR ALL and press To change the confidential code Repeat stages to above then Select CHANGE CODE and enter your own 4 digit number Confirm by entering it again Your new code will be stored Press to exit from the menus If you have forgotten your confidential code enter the universal code 0711 twice Locking the keys Press te select FEATURES Q and press Select CHILD LOCK and press to set the
23. on broadcasts the automatic sort signal the or on your cable network programmes will be correctly numbered First carry out operations to above then If not the programmes found will be Press J once to select AUTO STORE then numbered in descending order starting at 99 press gt The search begins 98 97 etc After several minutes the INSTALL menu Use the SORT menu to renumber them reappears automatically Some transmitters or cable networks broadcast their own sort parameters region language etc INSTALL Where this is the case make your choice using the ETE AQ keys and confirm with e COUNTRY SEARCHING lo exit or interrupt the search press the te key If diaa no picture is found refer to the chapter entitled e SORT 215 18 MHZ psonn 10 See also EasyLink function page 7 To exit from the menus press O This menu allows you to store the programmes one by one Press ew Select INSTALL then press The INSTALL menu appears Select MANUAL STORE then press The menu appears INSTALL e PICTURE e SOUND MANUAL STORE e FEATURES e SYSTEM EUROPE e SEARCH WEST EUR e PROG NO EAST EUR e FINE TUNE e STORE Press to go to the SYSTEM menu Use OQ to choose EUROPE automatic detection or manual detection with WEST EUR standard BG reception EAST EUR standard DK reception UK standard reception or FRANCE standard LL Then press to exit fro
24. ottom of the picture SUBTITLE ZOOM Mode This mode is used to display 4 3 pictures using the full surface of the screen leaving the sub titles visible Use the OQ keys to increase or decrease the section at the bottom of the picture SUPERWIDE Mode This mode is used to display 4 3 pictures using the full surface of the screen by enlarging the sides of the picture The OQ keys allow you to move the image up or down WIDE SCREEN Mode C3 This mode restores the correct proportions of pictures transmitted in 16 9 using full screen display O Note If you display a 4 3 picture in thid mode it will be enlarged horizontally 12 Selecting the correct mode Different modes can be selected to suit different picture formats use the following diagrams as a guide to which mode to use 4 3 Picture There are 5 possible modes for this type of picture SUBTITLE ZOOM a ju Progressive zoom 4 3 Picture Letterbox 16 9 Picture 13 Connecting peripheral equipment The television has 2 external sockets situated at the back of the set EXT1 and EXT2 The EXT1 socket has audio and video inputs outputs and RGB inputs The EXT2 socket has audio and video inputs outputs and S VHS inputs Video recorder Video recorder only Carry out the connections featured opposite Use a good quality euroconnector cable If your video recorder
25. r retrieving any materials that can be used again ask your dealer for further details 18 For the best results choose a position where light does not fall directly on the screen and at some distance away from radiators or other sources of heat Leave a space of at least 5 cm all around the TV for ventilation making sure that curtains cupboards etc cannot obstruct the air flow through the ventilation apertures The TV is intended for use in a domestic environment only and should never be operated or stored in excessively hot or humid atmospheres General Points Please take note of the section entitled Tips at the end of this booklet Interference The Department of Trade and Industry operates a Radio Interference Investigation Service to help TV licence holders improve reception of BBC and IBA programmes where they are being spoilt by interference If your dealer cannot help ask at a main Post Office for the booklet How to Improve Television and Radio Reception Mains connection Before connecting the TV to the mains check that the mains supply voltage corresponds to the voltage printed on the type plate on the rear panel of the TV If the mains voltage is different consult your dealer Information for users in the UK Not applicable outside the UK Positioning the TV Important This apparatus is fitted with an approved moulded 13 Amp plug To change a fuse in this type of plug proceed as follows 1
26. ssions only the central channel is used Dolby and the double D symbol D0 are trademarks of Dolby Laboratories Licensing Corporation Manufactured under license from Dolby Laboratories Licensing Corporation This menu allows you to use your TV as an alarm clock Press te Select FEATURES and press C gt twice The TIMER menu appears EE FEATURES gt SOUND TIMER e FEATURES e TIME 10 56 aang e START TIME e STOP TIME e PROG NO e ACTIVATE Press to enter and exit the sub menus and use keys OQ to adjust TIME enter current time Note the time is updated automatically each time the set is switched on using teletext information taken from programme 1 If programme 1 does Timer function _ not have teletext the update will not take place START TIME enter the start time STOPTIME enter the stop time PROG NO enter the number of the programme required ACTIVATE you can set the alarm to be activated e ONCE ONLY for a one off alarm e DAILY for a daily alarm or e STOP to cancel Press to set the TV to standby It will automatically switch on at the time programmed If you leave the TV switched on it will only change programme at the time indicated The combination of the CHILD LOCK and TIMER functions may be used to limit the length of time your television is in use for example by your children Locking the set the set You can bar access to certain pr
27. t key select EXT3 for aVHS or 8mm camcorder and S VHS3 for an S VHS or Hi 8 camcorder Only available on certain versions For a mono set connect the sound signal to the AUDIO L or AUDIO R input The sound automatically comes out of the left and right speakers of the set Headphones The A1 keys allow you to adjust the volume on the headphones and on the set Press if you want to cut off the sound on the set The headphones must have an impedance of between 32 and 600 ohms TV VCR DVD mode selector The remote control allows you to control the main functions of your video recorder or DVD Set the switch on the side of the remote control to the required mode TV VCR video recorder or DVD Then press one of the following keys standby contrast setting enter a number bring up a menu select AQ and set COC select programme record 44 rewind m stop gt play gt gt fast forward programming OK confirm II pause Some programming functions are not available on all models cursors menu OK key etc For video recorders equipped with the Easylink function when the set is on standby pressing the or te key once switches it on automatically The remote control is compatible with all the video recorders in our range as well as models which use the RCS signalling standard 15 Wireless surround speaker system The television can be equiped
28. ume differences between the different programmes or the EXT e PICTURE Use OQ keys to select a setting and keys sockets This setting is available for OC to adjust programmes 1 40 and the EXT sockets Note to access the AVL CORDLESS and DELAY e STORE stores the sound settings settings hidden at the bottom of the screen hold e AVL Automatic Volume Leveller automatic down key The CORDLESS and DELAY settings volume control used to avoid sudden are only availables if surround loudspeakers are increases in volume particularly when connected to the TV set The DELAY setting only changing programmes or during appears in DOLBY PRO LOGIC and HALL advertisements SURROUND modes e CORDLESS to adjust the different parameters Once the necessary adjustments have been of the cordless surround speakers see p 17 made select the option STORE and press C gt e DELAY to adjust the delay of surround effect to store them on the rear loudspedakers 31 is the default To exit from the menus press CD value Adjusting the sound level This menu allows you to balance the sound depending on the selected surround mode between the different speakers Remark the rear channel only appears if surround O Press select SOUND and press speakers are connected to the TV set To change The SOUND menu appears the surround mode press the 9 key Select BALANCE CENTRE or REAR and use the CC keys to adjust the leve
29. und modes You have a direct acces to the surround modes with the key Stereo The sound is reproduced on the left and right loudspeakers of the TV set Dolby 3 Stereo with stereo source The sound is distributed over the left right and centre loudspeakers This mode is not recommended for mono transmissions only the central channel is used Hall Surround with mono or stereo source The sound is reproduced on the left right and rear loudspeakers creating a Hall Surround ambient effect This mode is recommended for broadcasts that are not encoded in Dolby Surround if you wish to use a rear channel This mode is only available when surround loudspeakers are connected to the TV set 3D Surround optimal with Dolby Surround source This mode enables you to experience the effect of Dolby Pro Logic without the need of having rear speakers connected or activated The sound is reproduced on the left right and centre loudspeakers giving the impression of a rear surround effect Dolby Pro Logic with Dolby Surround sound source The left right centre and rear speakers reproduce the Dolby Pro Logic sound This mode is used when a film or programme has been recorded or encoded in Dolby Surround sound These films or programmes are always indicated by the symbol 00 DOLBY SURROUND The DOLBY PRO LOGIC mode is only available when surround loudspeakers are connected to the TV set This mode is not recommended for mono transmi
Download Pdf Manuals
Related Search