Philips 25ST1761 CRT Television User Manual
Contents
1. Switch ON OSD Menu in the setup screen or if applicable use the Format button on the Remote Control to select the different modes 4 3 Zoom 14 9 Zoom 16 9 Subtitle zoom Super wide Full screen and Wide screen 4 3 The picture is reproduced in 4 3 format and a black band is displayed on either side of the picture Zoom 14 9 The picture is enlarged to 14 9 format a thin black band remains on both sides of the picture Zoom 16 9 The picture is enlarged to 16 9 format This mode is recommended when displaying pictures that have black bands at the top and bottom letterbox format Subtitle Zoom This mode is used to display 4 3 pictures using the full surface of the screen leaving the subtitles visible Super Wide This mode is used to display 4 3 pictures using the full surface of the screen by enlarging the sides of the picture Widescreen This mode restores the correct proportions of pictures transmitted in 16 9 using the full screen display Fullscreen This mode displays images in full screen Remote control keys Source Select To toggle between available video sources DVD PAUSE To Pause DVD playback if applicable CH Guide To activate Channel Guide functionality Standby Press to switch the TV off DVD PLAY To Start DVD playback if applicable GUIDE PLAY DVD Rewind C O 0 To Rewind DVD playback Pre if applicable DVD FAST FORWARD To Fast Forward DVD Close Caption To activ2. by specialized companies Please find out about local regulations on the disposal of your old television set Pay particular attention to the disposal of exhausted batteries used in your TV Remote Control unit e Your television consumes energy in the stand by mode Energy consumption contributes to air and water pollution We advise you to switch off your television overnight instead of leaving it in stand by mode Preparation Wall mounting instructions Table stand According to the type of TV you ve purchased a wall mount bracket and or stand may be supplied To mount the supplied stand and or wall mount bracket refer to separate instructions Make sure that the wall mount is fixed securely so that it meets safety standards Make sure that air can circulate freely through the ventilation slots such as lighted candles should be placed on or in the into the aerial socket at the bottom of the TV Connecting the Mains Insert the mains plug into the wall socket and switch on Please refer to the label on the back of the television for the correct operating voltage Installing the remote control e Remove the cover at the back of the remote control e Insert the correct type and size batteries into the battery compartment making sure they are oriented correctly To prevent any unsafe situations no naked flame sources vicinity Avoid heat direct sunlight and exposure to rain or water The equipment should not be expo
3. to the volume at power off A specific switch on volume can be set so the TV always comes on tothat specific volume Switch On Pic Fmt This item sets the television s Picture Format at switch on Use the Right Left Cursor buttons or direct digit entry to adjust The available formats are Full Screen 4 3 Zoom 14 9 Zoom 16 9 Subtitle Zoom Widescreen and Super Zoom A description of each of these formats can be found in the Picture Formats section Power On The Power On menu function defines the behavior of the television whenever AC Power is applied The valid states are FORCED ON LAST STATUS and STANDBY o When FORCED ON the television can only be switched OFF by means of the main switch or a set up remote control or by ESP function Energy Saving Programmability controls the maximum continuous viewing time allowed by the control system When AC is applied the television turns ON When LAST STATUS the television goes to the previous status ON or Stand by when AC is applied o When STANDBY the television always goes to Stand by when AC is applied Volume Indicator To display volume indicator when adjusting volume select YES Select NO to hide the volume indicator Channel Display Program Display values can be Number Label All None Picture and Sound settings In this sub menu the Picture and Sound settings of the TV can be configured Brightness This changes picture brilliance
4. IV 26HF5443 28 User s Manual PHILIP Care of the screen Do not touch the screen with anything hard as this may scratch mar or damage the screen permanently Do not rub with dust clothes with chemical treatment Do not touch the surface with bare hands or greasy cloth some cosmetics are detrimental to the screen Unplug the TV before cleaning the screen When the surface becomes dusty please wipe gently with absorbent cotton or other soft materials like chamois soaks Do not use acetone toluene and alcohol because they cause chemical damage Do not use liquid cleaners or aerosol cleaners Wipe off saliva or water drops as soon as possible Their long time contact with the screen causes deformations and color fading Warning concerning stationary images on the TV screen Plasma displays A characteristic of Plasma Display Panels is that displaying the same image for a long time can cause a permanent afterimage to remain on the screen This is called phosphor burn in Normal use of the TV should involve the showing of pictures that contain constantly moving and changing images that fill the screen Warning concerning VGA HDMI display mode As this product processes in VGA HDMI mode some diagonal lines may be seen under circumstances of environmental interference This will not affect the computer signal performance that displays in VGA HDMI mode Environmental e Your television contains material that can be recycled and reused
5. NU OK key to remove the menu Tr Connecting the television set This section provides information on the connectivity available for different LCD Television sets Refer to the screen size that is relevant to your TV set 26 LCD TVs 22 sais MB Data D D o G O E DATA 2 S Video Audio Video In Connectors on the 26 LCD TVs External Bathroom Speaker Connector 8 Ohm 1 Watt Audio Video In Connector Side AV S Video In Connector Side S Video Data 2 RJ45 jack for interactive connectivity purposes Data 1 RJ12 jack for interactive connectivity purposes TV aerial socket Audio Video In Connectors YPbPr CVI 1 Video Audio Out Connectors Audio Video In Connectors AV2 VGA Connector for connecting a computer to the TV HDMI Connector for digital input I 2 9 4 5 6 7 8 9 1 1 0 de oN 2 Mounting the Television Stand This section provides information on mounting the television stand Refer to the screen size that is relevant to your LCD television set 26 LCD TVs 13
6. Picture Sound Color This changes the intensity of the color Contrast This changes the difference between Bri gh tness the light and dark tones Color Sharpness This changes the picture definition Tint Adjusts the picture to obtain natural skin Contrast a sharpn ess Active Control Active Control optimises the Tint quality of the picture according to the quality of Active Control reception Treble Treble Bass This adjusts the level of treble and Bass bass effects on the TV s sound output Balance Balance This balances the sound on the left and AVL tight speakers AVL Automatic Volume Leveller This is used to limit increases in sound especially on programme change or advertising slots Security settings Security settings In this sub menu the Security settings of the TV can be configured Security The menu function SECURITY E allows the user to select one of two states Security HIGH or STANDARD The default is STANDARD o While the TV set is in the Security High Mode the Set up menu can only be accessed with an Institutional Set up g Remote Control Keyboar dLock While the set is in the Security Standard Security Video Out Mute Mode the Set up Menu may be accessed either with an Institutional Set up Remote Control or with a guest remote control using an authorized access code Keyboard Lock The Keyboard Lockmenu function disables the television s local keyboard for
7. an be adjusted Conti guration Switch On OSD In this sub menu the behavior of the TV after switching on and the behavior of l the On Screen Display can be selected Switch On OSD Picture Sound In this sub menu the Picture and Picture Sound Sound settings of the TV can be selected Security In this sub menu the Security settings of Sec urity the TV can be configuted n Control In this sub menu the Control settings of Control the TV can be configured CC V Chip CC V Chip In this submenu the Close Caption and V Chip settings of the TV can be configured Switch On OSD In this sub menu the behavior of the TV after switching on and the behavior of the On Screen Display can be mn Welcome Message Press Cursor Left Right to Switch On OSD display the Welcome message entry menu O Welcome Message Welcome Message 2 TR O ine Switch On Channel a Switch On Volume With the ee Up Down buttons you can set the i i message characters Switch On Pic Fmt Switch On Channel This item sets the television s Power On channel at Power On If STANDARD is selected the set will turn on to the last viewed channel A Volume Indicator specific channel or input can be set so the TV Channel Display always comes on tothat specific channel Switch On Volume This item sets the television s volume at Power On Use the Right Left Cursor buttons or direct digit entry to adjust If STANDARD is selected the set will turn on
8. ate Close Caption functionality DVD STOP To Stop DVD playback e size e playback if applicable if applicable Smart Keys To select predefined picture and sound settings Menu Sleep Activates the sleep timer Press repeatedly to increment the countdown time with 15 minutes To call up or exit the menus Vol To adjust the volume Mute Interrupt the sound or restore it CH Channel Selection 6 To move up or down a TV channel 0 9 Digit keys To select a TV channel For a two digit programme number enter the second digit before the dash appears 16 9 Formats To adjust TV screen formats Alternate Channel To toggle between alternating channels PHILIPS 10 Low battery check Low battery check Press the key for approximately 5 seconds The following text appears SERVICE 1 REMOTE BATTERY OK If the word LOW appears instead of OK the batteries are low and must be replaced Should your remote be lost or broken you can still change some of the basic settings with the keys on top side of your TV Keys on top of TV Keys on side of TV Press e The Vol key to adjust the volume e The Programt key to select the TV channels or source Press the MENU OK key to summon the main menu without the remote control not available on all TV s Use e The Vol key and the Program key to select menu items in the directions as shown e The ME
9. cation Channel Install Channel Table Current Ring Configuration number of television channels Channel Table Allows selection between Cable and Antenna Current Ring This option allows selection of the Channel Ring from 1 to 4 Configuration In the Configuration menu various settings and features of the TV can be adjusted Communication COMMUNICATION Communication SP SPI is SmartPort communication SP 12C is 12C communication from the RJ 12 connector and HM LINK is basic gt j Hotel Mode communication where the IR Communication SP SPI commands are passed directly out of the RF12 Sto re gt connector OFF is used for stand alone applications DCM Type Generic STORE The right cursor button stores the communication type set DCM TYPE GENERIC refers to a US supported DCM NO SOURCE SWITCH is not supported in the US Channel Installation In the Channel Install sub menu program settings can be set When this menu is displayed all the protections are inactive Channel Install Channel The Channel number can be selected with the CH buttons Channel Input The Input menu item selects the desired Inpu t input source that will be assigned to the channel Possible values are TUNER AV2 SVIDEO Ring 1 SIDE AV SIDE S VIDEO CVH1 CVI 2 HD SYS tem A PC D PC A and HD D Some input sources Label may not be available on certain sets Mute Ring 1 T
10. e This item sets the limit for minimum volume allowed for the television set Use the Right Left cursor buttons or direct digit entry to adjust Max Volume This item sets the limit for the maximum volume allowed for the television set Use the Right Left cursor buttons or direct digit entry to adjust Close Caption V Chip Setup In this sub menu the Close Caption and V Chip settings of the TV can be configured CC V Chip SEN CC This menu iene provides the option of saving the Close Caption selection when the television is switched OFF is Yes is selected Save CC CC This menu item allows selection of Close Caption channels or to turn Close Caption CC OFF a Saved V Chip This menu item provides the Saved V Chip option of saving the V Chip selection when the V Chip Menu Item television is switched OFF is Yes is selected V Chip Menu Item This menu item sets the V Chip Se tup option of toggling the V Chip Menu Item to Yes or No V Chip Setup This sub menu allows the setting and disabling of Movie and TV ratings for the V Chip Picture Formats The pictures you receive may be transmitted in 16 9 format wide screen or 4 3 format conventional screen 16 9 pictures sometimes have a black band at the top and bottom of the screen letterbox format This function allows you to optimize the picture display on screen Using the different formats Select the preferred format from the
11. his menu item allows toggling between Saved and Deleted for Channel Ring 1 Auto Install TV System This menu item allows toggling between Ring 2 different TV transmission systems The options Ring 3 are AUTO NTSC PALM and PAL N Ring 4 Label This menu item wil be used to add a label name for each channel o By pressing the left right buttons you may enter or exit the label field by pressing the up down cursor you may insert alphanumeric characters o Pressing the Menu button lets you exit the Label menu item Mute This item enables disables picture and sound for the particular channel o NONE normal picture and sound enabled o VIDEO picture is blanked for this channel o AUDIO sound is muted for this channel e g information channel Auto Install TV This menu item initiates the automatic frequency searching of TV channels Inside the Auto Install TV sub menu select Start to begin frequency searching Noze In some LCD TV models the TV screen may 30 completely blank for a short period of time or there may be some brief flashing of images on the screen while the TV is searching for channels to install This is normal behaviour of the TV set When all TV channels have been successfully stored the first stored channel will then be displayed Ring 2 Ring3 Ring 4 This menu item allows toggling between Saved and Deleted for Channel Rings 2 3 4 In the Configuration menu various settings and features of the TV c
12. sed to any dripping or splashing moisture and no objects filled with liquids such as vases should be placed on it Insert the aerial plug firmly Switch the TV on l Press the power switch O on the TV An indicator on the front of the TV lights up and the screen comes on a If the TV is in standby mode red indicator press the TV keys or the O key on the remote control To use the menus To use the menus Accessing the Set up Menu When the set is in the High Security Mode the Setup menu can be accessed only with an Institutional Set up Remote Control RG4172BK or RC2573 RG4172BK RC 2573 Optional Optional Navigation The current menu item can be selected by means of the cursor up and cursor down keys Submenus can be accessed from menu items with a gt symbol by pressing the cursor right key Language Communication To exit any menu press Menu button Channel Install Select YES to activate enable a setting Channel Table Current Ring Configuration NO to deactivate disable Setup menu items menu items Language Select the language of the installation menu Options are ENGLISH FRANCAIS and ESPANOL Communication The Communication menu is required to enable interactive applications For more information consult the application notes For standalone applications select OFF Channel Install This sub menu allows setting the Language Communi
13. volume and program control when set to A Ehe Video Out Mute This option allows the user to mute Video outputs from the TV set to prevent unauthorized copying of Video content Control settings In this sub menu the Control settings of the TV can be configured Control ESP Energy Saving Programmability Mode ESP controls the maximum continuous viewing ESP time allowed by the control system The ESP i Menu function is shown as ESP and its valid Audio Video Mute values are OFF and 1 99 in hours Digit Timeout Audio Video Mute The Audio Video Mute J menu function determines whether the video 3 Digit Entry should be blanked and the audio muted if the Source Menu Item currently tuned channel has no signal Channel Guide Digit dimoni This is the time out to enter the second digit of channel number example for Min Volume channel number 10 and above Max Volume 3 Digit Entry To allow for 3 digit entry of channel numbers via the Remote Control select YES Select NO to allow only 2 digit entry of channel numbers via Remote Control Source Menu Item Toggle between YES NO to enable or disable selection of the TV Source Input via the guest Setup menu when using the guest Remote Control Channel Guide Select YES to allow the Channel Guide Menu to be displayed if the Channel Guide button is pressed on the guest Remote Control Select NO to disable this feature Min Volum
Download Pdf Manuals
Related Search