Panasonic AW-HB505 Switch User Manual
Contents
1. AUTO position iris data will not be stored in the memory Keep MEMORY Switch of the multi hybrid control panel depressed MEMORY Switch lights and all the 10 but tons of PRESET Switch flash press any of the buttons 1 to 10 of PRESET Switch as desired to store the data in the memory Only that button of PRESET Switches where the data is stored lights Note If data is stored again in the same button of PRESET Switches of the multi hybrid control panel the preceding data is deleted Repeat Steps D and 3 to store the presettings of all the cameras and pan tilt heads in the memory 22 6 Various Switch Settings Select a desired operating camera and pan tilt head with the CONTROL switch on the multi hybrid control panel then control the camera and pan tilt head Control the cam era and pan tilt head using PRESET Switch PAN TILT Lever ZOOM Lever FOCUS Lever IRIS AUTO MANU Switch and other switches In case of not changing the adjustment data and set tings it is not necessary to repeat the adjustment and setting procedures described in Sections 2 to 5 RACK MOUNTING To mount the multiport hub in a rack use the supplied rack mounting brackets and screws M4x10 D Press the power switch to turn power off 2 Remove the 4 feet 3 With the rack mounting brackets on both ends of the multiport hub fasten them with the supplied screws 4 pcs 4 Mount the multiport hub in the rack and fasten it with the2. camera with the CONTROL switch on the multi hybrid control panel set the CAM CONT switch to the ON position Note When the CAM CONT switch on the multi hybrid control panel is set to the ON position the switch settings of the multi hybrid control panel are sent to the camera to update its settings Do not set the CAM CONT switch to the ON position except when changing the camera settings If another camera is selected with the CONTROL switch while the CAM CONT switch is in the ON position the settings of the selected camera will be similarly changed Set the CAM CONT switch back to the OFF position before changing one camera for another with the CONTROL switch 2 Adjust the cable compensation genlock and total pedestal of the selected camera e Cable Compensation Signal degradation due to cable length between the con trol panel and the pan tilt head can be compensated for CD If the cable length from the pan tilt head to the control panel is longer than 300 meters set the cable com pensation switch on the pan tilt head to the ON posi tion For details refer to INSTALLATION OF PAN TILT HEAD at page 8 or the Operating Instructions for Pan tilt Head 2 Connect a waveform monitor or a vectorscope to the video output connector on the control panel for the corresponding the camera pan tilt head number 1 to 5 set the video output connector on the control panel set the mode switch to the BAR position then observe the co
3. change in the ambient temperature or at the turn of a season Once the black balance is adjusted no readjustment is necessary if the camera is used under the same conditions 24 e Automatic Black Balance Control When ABC Switch of the multi hybrid control panel is pressed the lens iris is automatically closed to set the black balance Keep IRIS AUTO MANU Switch of the multi hybrid control panel in the AUTO position when setting the black balance The auto set LED flashes during black balance adjustment and goes out when it is finished normally The LED remains lit if the adjust ment fails In such a such try to adjust it again Black balance adjustment may fail in some cases where the total pedestal is too low Adjust the total pedestal with T PED Control of the multi hybrid control panel and adjust the black balance again Repeat Steps 1 and 2 to adjust the white blance and black balance of all cameras 5 Camera and Pan tilt Head Presetting 1 2 Select a camera and pan tilt head with the CONTROL switch on the multi hybrid control panel Pick up a desired object with the camera using PAN TILT Lever ZOOM Lever and FOCUS Lever of the multi hybrid control panel Select a white balance con trol mode using AUTO ATW ATW Switch AUTO ATW A Switch or AUTO ATW B Switch To store iris data in the memory set IRIS AUTO MANU Switch to the MANU position and turn the iris control When IRIS AUTO MANU Switch is in the
4. rack mounting screws 4 pcs Notes he rack mounting screws are optional Optional Keep the multiport hub away at least its size from other devices or mount a cooling fan in the rack so that the temperature inside the rack will not rise above 50 C 23 Screws Mounting Power switch Rack mounting screws Optiona SPECIFICATIONS Source Voltage Power Consumption Video Input Genlock Input Camera Control Intput Pan tilt Control Intput Video Output S video Output Preview Video Output Genlock Output Camera Control Output Pan tilt Control Output Switches Controls Pan tilt Head Connecting Cable Control Panel Connecting Cable Maximum cable length 12 V DC 4 pin cannon connector 12V 2A 1 0 composite 75Q x 5 BNC connector 1 0 V p p black burst 75Q BNC connector Control signal BNC connector Control signal RJ 45 8P modular jack 1 0 composite 75Q x 5 BNC connector Y 0 714 V p p 75 Q C 0 286 V p p burst level chrominance 75Q x 5 S VIDEO connector 1 0 750 BNC connector 75Q x 5 BNC connector Control signal x 5 BNC connector Control signal x 5 RJ 45 8P modular jack Power ON OFF Switch CABLE COMP Y Control CABLE COMP C Control x 4 Coaxial Cable pc
5. 5 is combined with the Multi Hybrid Control Panel AW RP505 to control up to five Pan tilt Heads AW PH300 and Color Video Cameras AW E560 When the Multiport Hub AW HB505 is connected to the Multi Hybrid Control Panel with three coaxial cables 5C 2V and a single 10BASE T Straight cable UTP category 5 and the Multiport Hub connected to each camera and pan tilt head with three coaxial cables 5C 2V and a single 10BASE T Straight cable UTP category 5 various kinds of control can be performed on the cameras and pan tilt heads and camera video signals and genlock signals can be sent and received The maximum cable length from the Multi Hybrid Control Panel to the Multiport Hub is 10 meters The maximum cable length between the Multiport Hub and the cameras and pan tilt heads is 500 meters PRECAUTIONS Use only with AC Adaptor Model AW PS505 e Care Pull out the power cable plug and wipe the control e Handle the control panel with care panel clean with a dry cloth If it is extremely dirty dip Dropping the control panel or subjecting it to a strong a cloth into a diluted solution of kitchen detergent shock can cause a failure or an accident squeeze it hard and wipe the product surfaces care fully Operating temperature range 10 to 45 C Avoid using it in a cold place below 10 C or a hot place above 45 C because low or high temperature will adversely affect the parts inside Note Do not use benz
6. ATW B Switch of the multi hybrid control panel if the camera is used under the same conditions No readjustment is necessary If the white balance is readjusted the exist ing white balance data is replaced with new data Press either AUTO ATW A Switch or AUTO ATW B switch of the multi hybrid control panel 2 3 Pick up a white object a white wall or white handker chief for example fully on the screen Be careful to keep a shiny or bright object out of the screen When AWC Switch of the multi hybrid control panel is pressed the auto Auto set Indicator flashes and the white balance is automatically adjusted t goes out when it has been properly adjusted If the adjustment fails Auto set Indicator remains lit In such a case change the brightness iris object light source etc and adjust it again Automatic Tracing White Balance Control ATW When AUTO ATW ATW Switch of the multi hybrid con trol panel is pressed the white balance is automatical ly adjusted even if the light source or color tempera ture changes thus reproducing a natural image Note The white balance may deviate if there is noth ing white in the image The white balance may not be fully adjusted depending on the light source or color temperature Black balance adjustment is necessary when using the camera for the first time or if the camera has not been used for a long period of time Black balance adjustment is necessary if there is a big
7. Control 5 PAN TILT Zoom Lens CONTROL Un Multiport Hab Unnecessary if DE ToS pdt AC Adabtor AW PS505 no optional unit is connected Multiport Hub OPTION CONTROL SWITCH SYSTEM DC 15V TALLY LAMP CONTROL Unnecessary if no CAMERA CONTROL Preview Color Monitor 750 terminator halogen lamp is used Halogen Lamp PREVIEW VIDEO Pan tilt Head AC CONTACT Adaptor AW PS300 fa Option Unlt Signal Generator Control Panel i AC Adaptor AW PS301 a Multi Hybrid Control panel AW RP505 14 OPERATION 1 Power Set the power switches on the pan tilt head AC adapter and the multiport hub AC adapter to the ON position then set Power control Switch on the multi control panel to the ON position Pan tilt Limiter Setting for Pan tilt Head If there are obstacles around the pan tilt heads set the limiters to limit the operating range pan left and right ends tilt up and down ends of the pan tilt head Note The switches on the pan tilt head have been pre set before shipment from the factory on the assumption that the pan tilt head would be sus pended from the ceiling If the pan tilt head is mounted on a board for example be sure to shift the mounting direction switches on the pan tilt head Unless this is done pan tilt directions will be reversed and pan head operation limiter data can not be properly stored in
8. Multiport Hub AW HB505 Operating nctructions Serle Befor DAR eadt un ells mpletely RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER OR BACK NO USER SER VICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PER SONNEL The lightning flash with arrowhead sym bol within an equilateral triangle is intended to alert the user to the pres ence of uninsulated dangerous voltage within the product s enclosure that may be of sufficient magnitude to constitute a SA 1965 risk of electric shock to persons The exclamation point within an equilat eral triangle is intended to alert the user to the presence of important operating and maintenance servicing instructions in the literature accompanying the appli ance SA 1966 Warning This equipment generates and uses radio frequency ener gy and if not installed and used properly i e in strict accordance with the instruction manual may cause harmful interference to radio communications It has been tested and found to comply with the limits for a Class A computing device pursuant to Subpart J of Part 15 of FCC Rules which are designed to provide reasonable protection against such interference when operated in a commercial environment For U S A 4 This digital apparatus does not exceed the Class A limits for radio noise emissions from digital apparatus set
9. N ZONE Los Angeles Region 6550 Katella Ave 17A 1 Cypress CA 90630 714 373 7271 Government Marketing Department 52 West Gude Drive Rockville MD 20850 301 738 3840 PANASONIC CANADA INC 5770 Ambler Drive Mississauga Ontario LAW 2T3 Canada 905 624 5010 PANASONIC SALES COMPANY DIVISION OF MATSUSHITA ELECTRIC OF PUERTO RICO INC San Gabriel Industrial Park 65th Infantry Ave KM 9 5 Carolina Puerto Rico 00630 809 750 4300 N1197 0 7J1A108A Printed in Japan
10. e maximum allowable cable length is 10 meters Genlock Input Connector TO CONTROL PANEL G L IN BNC Connector Connect it to the G L Onput Connector G L OUT on the multi hybrid control panel with a coaxial cable 5C 2V or equivalent in operating the camera in external sync mode The cable can be extended up to 10 meters Q Camera Control Input Connector TO CONTROL PANEL CAMERA CONTROL IN Connect it to Camera Control Input Connector CAM ERA CONTROL OUT on the multi hybrid control panel with a coaxial straight cable 5C 2V or equivalent which may be extended up to 10 meters Pan tilt Control Output Connector TO CAMERA PAN TILT HEAD PAN TILT CONTOROL OUT RJ 45 8 pin Modular Jack Connect one of 1 to 5 Pan tilt Control Output Connectors to Pan tilt Control Input Connector P T CONTROL IN on the corresponding camera and pan tilt head with a 10BASE T straight cable UTP cat egory 5 or equivalent The maximum allowable cable length is 500 meters Video Input Connector TO CAMERA PAN TILT HEAD VIDEO IN BNC Connector Connect one of 1 to 5 Video Input Connectors to Video Output Connector Connector VIDEO OUT on the corresponding camera and pan tilt head with a coaxial cable 5C 2V or equivalent The maximum allowable cable length is 500 meters Genlock Output Connector TO CAMERA PAN TILT HEAD G L OUT BNC Connector Connect one of 1 to 5 HEAD G L OUT Connectors to Genlock Signal Input Connect
11. ect bolts of a length appropriate to the material and structure of the mounting base and the overall weight applied to it Fasten the bolts securely with plain washers spring washers and hex nuts the bolts are not securely tightened the pan tilt head might fall to cause injuries or accidents In case of sus pending the pan tilt head locally purchase a wire rod strong enough to hold the pan tilt head camera and Hole for wire rod to lenses pass it through the wire hole opened in a firm prevent e need w from falling board such as of the ceiling for example and fasten it securely The switches on the pan tilt head have been preset before shipment from the factory on the assumption that the pan tilt head would be suspended from the ceiling If the pan tilt head is mounted on a board for example be sure to shift the mounting direction switch es on the pan tilt head Unless this is done pan tilt directions will be reversed and pan head operation lim iter data cannot be properly stored in the memory For details on shifting these switches refer to the Operating Instructions for Pan tilt Head e Changing Switch Settings on Pan tilt Head 3 Place the cover back on the pan tilt head 1 Remove the cover from the pan tilt head Be sure not to trap the wires Be careful of the Tally Indicator wire Tally Indicator DESKTOP Sw1 SW2 PO 2 Shift the mounting direc
12. ine paint thinner or other volatile liquids e When using a chemical duster carefully read the caution notes on its use e Switch power off before power cable connection or disconnection Be sure to switch power off before connecting or dis connecting the power cable Avoid outdoor use Install the control panel more than 1 meter away from the monitors MAJOR OPERATING CONTROLS AND THEIR FUNCTIONS FRONT PANEL Panasonic Q Power Indicator POWER Lights red when Power ON OFF Switch is in the ON position and goes out when the same switch is set to the OFF position Power ON OFF Switch POWER ON OFF The camera and pan tilt head are switched on when this switch is set to the ON position The POWER indi u Port Hub AW H8505 cator lights The camera and pan tilt head are partial ly switched off when this switch is set to the OFF posi tion Note This switch must be set to the ON position in advance in controlling the cameras and pan tilt heads from the Multi Hybrid Control Panel Cable Compensation Luminance Control CABLE COMP Y Used to adjust the Y luminance signal level of video output signals as appropriate to the length of the cable between the pan tilt head and the Multiport Hub First select a camera with the Control Switch on the Multi Hybrid Control Panel and set the Camera Control Switch to the ON position Set the MODE Switch on the Multi Hybrid C
13. is used for color phase adjustment 19 Total Pedestal Adjustment Total pedestal adjustment is made to adjust the pedestals of two or more cameras Using an oscillo scope or a waveform monitor adjust the pedestals to 5 IRE 0 035 V or 7 5 IRE 0 050 V with T PED Control of the multi hybrid control panel T PED Control T PED CABLE COMP Y C Pires E 5 IRE 0 035V or 7 5 IRE 0 050V 3 Set the switches for gain shutter etc as appropriate to the conditions of using the camera 4 Set the camera control switch on the multi hybrid con trol panel to the OFF position 5 Repeat Steps 1 to 4 to finish cable compensation G L adjustment total pedestal adjustment and switch set ting for all the cameras 20 4 White Balance and Black Balance 1 2 Setting Select a camera with the CONTROL switch on the multi hybrid control panel Select a camera with the CONTROL switch on the multi hybrid control panel White balance adjustment is necessary when using the camera for the first time or if the camera has not been used for a long period of time Once the white balance is adjusted no readjustment is necessary if the camera is used under the same condi tions Automatic White Balance Control AWC The color temperature conditions for two channels A and B can be stored in the memory in advance Once the white balance is adjusted all that is needed is to select either AUTO ATW A Switch or AUTO
14. istance between the control panel and pan tlt head is 10 meters for coaxial cables 5C 2V and lOBASE T straight cable UTP category 5 or equiva lent e Connect the multiport hub to the multi hybrid control panel with the three coaxial cables video signal G L signal camera control signal and one 10 straight cable pan tilt head control signal The maxi mum distance between the control panel and each pan tilt head is 500 meters for coaxial cables 5C 2V and 10BASE T straight cable UTP category 5 or equiv alent e For further details on connecting the individual devices refer to their operating instruction manuals IRIS CONTROL Color Video Camera AW E560 Pan tilt Head AW PH300 To Servo Control Zoom Lens ZOOM FOCUS PREVIEW VIDEO OUT G L THROUGH OUT Camera Cable Multi Hybrid Control Panel AW CA20T15 AW RP505 Multiport Hub AW HB505 AC IN PTION SW OPTION SW MP a i JONTROL OUT CONTROL IN DU amp 0 C S Ad Pan tilt Head AC Adaptor AW PS300 Connecting the Control Panel to Multiport Hub Color video Camera WV E560 Pan tilt Head AW PH300 and Head AC Adapter AW PS300 43 Expample of System Connection ZOOM FOCUS CONTROL Color Video 5 Color Monitor 750 terminator 8 Camera Cable AW CA20T15 CAMERA CONTROL IRIS CONTROL Servo
15. itch again for 5 seconds or more When the set limit is reset button 10 of PRESET Switch lights Up Tilting Limiter Turn the pan tilt head to the desired up tilting limit with PAN TILT Lever of the multi hybrid control panel keep MEMORY Switch depressed and simultaneously press buttons 2 and 3 of PRESET Switch for 5 seconds or more When the desired limit has been set button 5 of PRESET Switch lights To reset the limit keep the MEMORY switch depressed and simultaneously press buttons 2 and 3 of PRESET Switch again for 5 seconds or more When the set limit is reset button 10 of PRESET Switch lights Down Tilting Limiter Turn the pan tilt head to the desired down tilting limit with PAN TILT Lever of the multi hybrid control panel keep MEMORY Switch depressed and simultaneously press buttons 7 and 8 of PRESET Switch for 5 sec onds or more When the desired limit has been set button 5 of PRESET Switch lights To reset the limit keep the MEMORY switch depressed and simultaneously press buttons 7 and 8 of PRESET Switch again for 5 seconds or more When the set limit is reset button 10 of PRESET Switch lights Select a pan tilt head with the CONTROL switch on the multi hybrid control panel and set the its operating range limiters Repeat the same process for each of the other pan tilt heads Cable Compensation Setting Genlock and Nr Total Pedestal Adjustment After selecting a
16. lor bar signals 3 Adjust the Y luminance signal level with the CABLE COMP Y control for the corresponding camera pan tilt head number 1 to 5 then adjust the CABLE COMP Y control then adjust the C chrominance sig nal level with CABLE COMP C control Repeat this until the video output of the control panel is adjusted as shown in the figure below Note Turning CABLE COMP Y control changes not only the Y luminance signal level but also the video signal levels as a whole 17 CABLE COMP Y Control Multiport Hub AW HB505 CABLE COMP C Control Waveform Monitor Color Monitor Vector Scope 750 termination Color Monitor Waveform Monitor Color Monitor Waveform Monitor BLUE 1V p p 1V p p 18 e Genlock Adjustment To use the camera in external sync mode phase adjust ment is necessary to match the phases with those of the other units and camera No G L adjustment is necessary in case of no genlock e Horizontal Phase Adjustment D Set G L PHASE ON OFF Switch of the multi hybrid con trol panel to the ON position Note When G L PHASE ON OFF Switch of the multi hybrid control panel is set to the ON position the sync phase of the camera changes to the settings of G L PHASE H Control G L PHASE Coarse Switch and G L PHASE SC Control Unless G L phase adjustment is necessary do not set G L PHASE ON OFF Switch to the ON positi
17. on 2 Observe the waveforms of the G L signal input black burst signal and video signal output on a dual chan nel oscilloscope and turn the G L horizontal phase control to match the horizontal phase as shown in the next page G L PHASE H Control G L PHASE External genlock ON OFF Switch input signal black burst sig nal G L PHASE ON OFF Switch G L PHASE Coarse Switch G L PHASE SC Control G L PHASE Video signal 8 Set G L PHASE ON OFF Switch of the multi hybrid con trol panel back to the OFF position Color bar of d camera e Subcarrier Phase Adjustment D Set G L PHASE ON OFF Switch 15 of the multi hybrid control panel to the ON position Note When G L PHASE ON OFF Switch of the multi hybrid control panel is set to the ON position the sync phase of the camera changes to the settings of G L PHASE H Control G L PHASE Coarse Split line Color bar of special Effects Switch and G L PHASE SC Control Unless G L generator phase adjustment is necessary do not set G L PRASE RINORE CE ne Og we Set G L PHASE ON OFF Switch of the multi hybrid con l trol panel back to the OFF position 2 Adjust G L PHASE Coarse Switch and G L PHASE SC Control to match the subcarrier color phase of the video signal output with that of the reference tone such as of the program output split color bar output of a Color Special Effect Generator for example Higher accuracy can be obtained if a vectorscope
18. ontrol Panel to BAR then output color bar signals from the camera and connect a waveform monitor or vectorscope for example to the video out put If the cable between the pan tilt head and the Multiport Hub is longer than 300 meters set the Cable Compensation Switch on the pan tilt head to the ON position in advance For details refer to the Operating Procedures at page 8 or the Operating Instructions for the Pan tilt Head First adjust the Y luminance signal level with one of 1 to 5 CABLE COMP Y Controls that corresponds to the selected camera then adjust the C chrominance signal level with CABLE COMP C Control Repeat these steps to adjust the video out put of the Multiport Hub to the camera output level After the adjustment set the Camera Control Switch on the Multi Hybrid Control Panel back to the OFF posi tion Note Turning this control changes not only the Y sig nal level but also the entire video level Cable Compensation Chrominance Control CABLE COMP C Used to adjust the C chrominance signal level of video output signals as appropriate to the length of the cable between the pan tilt head and the Multiport Hub First select a camera with the Control Switch on the Multi Hybrid Control Panel and set the Camera Control Switch to the ON position Set the MODE Switch on the Multi Hybrid Control Panel to BAR then output color bar signals from the camera and connect a waveform monitor or vectorsc
19. ope for example to the video output If the cable between the pan tilt head and the Multiport Hub is longer than 300 meters set the Cable Compensation Switch on the pan tilt head to the ON position in advance For details refer to the Operating Procedures at page 8 or the Operating Instructions for the Pan tilt Head First adjust the Y luminance signal level with one of 1 to 5 CABLE COMP Y Controls that corresponds to the selected camera then adjust the C chrominance signal level with CABLE COMP C Control Repeat these steps to adjust the video output of the Multiport Hub to the camera output level After the adjustment set the Camera Control Switch on the Multi Hybrid Control Panel back to the OFF position REAR PANEL e Q 12V DC Input Connector DC 12V IN 4 pin Cannon Connector Connect the AC Adaptor AW PS505 optional accesso ry Pan tilt Control Input Connector TO CONTROL PANEL PAN TILT HEAD CONTOROL IN RJ 45 8 pin Modular Jack Connect it to Pan tilt Control Output Connector P T CONTROL OUT on the multi hybrid control panel with a 10BASE T straight cable UTP category 5 or equiva lent which may be extended up to 10 meters Q Preview Video Output Connector TO CONTROL PANEL PREVIEW OUT BNC Connector Connect it to Preview Video Input Connector PRE VIEW IN on the Multi Hybrid Control Panel with a coaxial cable 5C 2V or equivalent Th
20. or G L IN on the cor responding camera and pan tilt head with a coaxial cable 5C 2V or equivalent The maximum allowable cable length is 500 meters Camera Control Output Connector TO CAMERA PAN TILT HEAD CAMERA CONTROL OUT Connect one of 1 to 5 Camera Control Output Connectors to Camera Control Signal Input Connector CAMERA CONTROL IN on the corresponding cam era and pan tilt head with a coaxial cable 5C 2V or equivalent The maximum allowable cable length is 500 meters S Video Output Connector S VIDEO OUT 4 pin S Connector The luminance Y and chrominance C signals of the corresponding camera are output from one of 1 to 5 S Video Output Connectors Connect it to a monitor or an S VHS VCR for V video input Video Output Connector VIDEO OUT BNC Connector The video signals of the corresponding camera adjust ed by the cable compensation circuit and CABLE COMP Y and C Controls amp and in the correspond ing pan tilt head are output from one of 1 to 5 Video Output Connectors Connect a monitor special effect generator SEG or VCR for example to it with a coaxial cable for video input INSTALLATION OF PAN TILT HEAD e Install the pan tilt head after carefully reading the Have a strong enough wire rod head and fasten it Operating Instructions for Pan tilt Head securely to a firm board such as of the ceiling Have four hex bolts M6 x 4 ready for mounting the pan title head Sel
21. out in the Radio Interference Regulations of the Canadian Department of Communications For CANADA 4 The serial number of this product may be found on the bot tom of the unit You should note the serial number of this unit in the space provided and retain this book as a permanent record of your purchase to aid identification in the event of theft Model No Serial No WARNING TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE CONTENTS FEA TORE ae e E 2 PRECAUTION c 3 MAJOR OPERATING CONTROLS AND THEIFCFUNGTICONS 4 e m 4 PANED MERCI Ee 6 INSTALLA OI I INI MM 8 se zeli m 11 Cx e m M H R 15 RACK TEE 29 clucsldeuxpec 24 nez ip scree 25 FEATURES he Multiport Hub AW HB50
22. s 10BASE T straight cable 1 pc In case of using G L function pan tilt head x 4 Coaxial Cable 3 pcs 10BASE T straight cable 1 pc In case of using G L function Control panel connecting cable 10 m In case of using coaxial cables 5C 2V and 10BASE T cable UTP category 5 Pan tilt head connecting cable 500 m In case of using coaxial cables 5C 2V and 10BASE T cable UTP category 5 24 Operating temperature 10 C to 45 C 14 F to 113 Dimensions 420 W x 88 H x 250 D mm 16 9 16 W x 3 7 16 H x9 13 16 D Weight 4 kg 8 8 lbs Finish Cover AV lvory vinyl chloride steel Panel AV lvory painting Weight and dimensions indicated are approximate opecifications are subject to change without notice ACCESSORIES Rack mounting 2 Mounting SCrews 4 25 Panasonic Broadcast amp Television Systems Company Division of Matsushita Electric Corporation of America Executive Office One Panasonic Way 2E 6 Secaucus NJ 07094 Regional Offices EASTERN ZONE 43 Hartz Way Secaucus NJ 07094 201 348 7620 CENTRAL ZONE 1707 North Randall Road Elgin IL 60123 847 468 5200 SOUTHERN ZONE Atlanta Region 1225 Northbrook Parkway Suite 1 160 Suwanee GA 30174 Panazip 11 770 338 6841 fax 770 338 6741 Law Enforcement Video Products 1225 Northbrook Parkway Suite 1 160 Suwanee GA 30174 Panazip 11 770 338 6844 fax 770 338 6721 WESTER
23. the Color Video Camera WV E550 or AW E560 The color Video Camera WV E550 cannot used To connect the pan tilt head to the camera the Camera Cable AW CA20T15 optional is necessary Locally purchase a DC cable with a nominal cross sec tion of 1 25 mm or larger that meets the UL specifica tions and connect the Pan tilt Head AW PH300 to the Pan tilt Head AC Adaptor AW PS300 with that cable The maximum distance between the pan tilt head and pan tilt head AC adapter is 30 m Connect the AC Adapter AW PS505 to the Multiport Hub AW HB505 Connect the AC Adaptor AW PS301 to the Multi Hybrid Control Panel AW RP505 and clamp the DC cable of the AC adapter to the cord clamp on the control panel Connect the Pan tilt Head AW PH300 to the Color Video Camera or WV E560 with the Camera Cable AW CA20T15 Connect the iris control cable of the motor driven zoom lens to the camera and the remote zoom focus control cable to the pan tilt head If the remote zoom focus control cable of the motor driven zoom lens is con nected to the camera the lens cannot be controlled Remote Zoom Focus Control Cable zu D ee ee P 12 e Connect the multiport hub to the multi hybrid control panel with the three coaxial cables video signal G L signal camera control signal and one 10 straight cable pan tilt head control signal The maxi mum d
24. the memory For details on shifting these switches refer to INSTALLATION OF PAN TILT HEAD at page 8 or the Operating Instructions for Pan tilt Head 15 Left panning limiter D 2 Up tilting limiter Preset position selection switch Lights on completion of setting Lights on completion of resetting Preset memory switch Down titing limitor IN Right panning limiter Select a pan tilt head with the CONTROL switch on the multi hybrid control panel Left Panning Limiter Turn the pan tilt head to the desired left panning limit with PAN TILT Lever of the multi hybrid control panel keep MEMORY Switch depressed and simultaneously press buttons 1 and 6 of PRESET Switch for 5 sec onds or more When the desired limit has been set button 5 of PRESET Switch lights To reset the limit keep the MEMORY switch depressed and simultaneously press buttons 1 and 6 of PRESET Switch again for 5 seconds or more When the set limit is reset button 10 of PRESET Switch lights 3 Right Panning Limiter Turn the pan tilt head to the desired right panning limit with PAN TILT Lever of the multi hybrid control panel keep MEMORY Switch depressed and simultaneously press buttons 4 and 9 of PRESET Switch for 5 sec onds or more When the desired limit has been set button 5 of PRESET Switch lights To reset the limit keep the MEMORY Switch depressed and simultaneously press buttons 4 and 9 of PRESET Sw
25. tion switches SW1 SW2 on e f the pan tilt head is connected to the control panel pan tilt head depending on whether the head is with a cable longer than 300 meters set the cable suspended from the ceiling or mounted on the floor compensation switch on the pan tilt head to the ON They are originally set for suspended installation position in advance If the distance between the pan tilt head and the control panel is shorter than 300 meters keep the switch in the original position OFF For details on shifting the switch refer to the figure below or the Operating Instructions for Pan tilt Head e Shifting Cable Compensation Switch on Head If the distance from the control panel to the pan tilt head is longer than 300 meters set the cable compen sation switch to the ON position by observing the fol lowing procedure C Remove the controller connection panel from the pan tilt head Be careful of the wires 2 Shift the cable compensation switch on the inner side of the controller connection panel of the pan tilt head to the ON position 3 Place the controller connection panel back on the pan tilt head 10 Before making any connection switch off all the com ponents of the system Use the Control Panel AC Adaptor AW PS301 optional and Pan tilt Head AC Adaptor AW PS300 optional DDD C 9 PO fo 67 CONNECTION Use the Pan tilt Head AW PH300 and
Download Pdf Manuals
Related Search