Outlaw Audio ECS-10 Speaker User Manual
Contents
1. WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN a Outlaw Audio AUTO ON OFF SPEAKER LEVEL INPUT BEEG AVIS RISQUE DE CHOC LECTRIQUE NE PAS OUVRIR SUBWOOFER VOLUME MAX INACTI ACTIVE 80 Hz e 120 Hz 40 Hz INTERNAL SUBWOOFER X OVER DIRECT PHASE Qe R L OUTPUT INPUT we LOW PASS CROSSOVER LFE The ECS 10 s Controls and Connections A MASTER POWER Switch This switch is used to turn the ECS 10 on or off When the unit will not be used for extended periods we recommend that it be turned off to prevent accidental activation SUBWOOFER VOLUME Control This knob controls the output level of the ECS 10 AUTO ON OFF Power Switch This switch enables the ECS 10 s signal sense mode so that the unit turns on automatically when an audio signal is present LOW PASS CROSSOVER Control This control sets the frequency of the built in variable low pass crossover X OVER Switch When an external crossover such as the Outlaw Audio ICBM is used this switch will bypass the ECS 10 s internal crossover PHASE Switch This control changes the phase of the ECS 10 with respect to the main speakers LINE LEVEL OUT Connect these bandwidth limited outputs to your power amplifier LFE Connect the subwoofer output or stereo preamp outputs of your recei2. Dimensions H W D 13 23 in inc feet x 12 375 in x 13 875 in Shipping Weight 46 Ibs Owner s Manual Outlaw Audio Limited Warranty Outlaw Audio LLC Limited Warranty This warranty protects the owner of the Outlaw Audio LLC hereby referred to as Outlaw Audio ECS 10 Enhanced Cube Subwoofer the PRODUCT for three 3 years from the date of purchase This warranty covers all defects in material and workmanship with the following specific exceptions These are Damage caused by improper installation or adjustment Damage caused by accident unreasonable use or neglect Damage from failure to follow instructions contained in this Owner s Manual Damage from the performance of repairs by someone not authorized by Outlaw Audio Any unit on which the serial number has been defaced modified or removed Damage occurring during shipment Units which have been altered or modified in design appearance or construction This warranty covers only the actual defects within the PRODUCT itself IT DOES NOT cover costs of installation in or removal from a fixed installa tion or normal set up claims based on any misrepresentation by the seller or performance variations resulting from installation related circumstances such as signal quality AC power or incompatibilities with speakers and or other system components During the warranty period Outlaw Audio will at its option either repair the def
3. or LFE Out If your receiver or processor does not have this type of output you will need to follow the Connecting to a System with No Preamp Outputs instructions that fol low this section 3 Connect one end of the subwoofer cable to the subwoofer or LFE output on the receiver or processor 4 Locate the connection labeled LFE on the rear panel of the ECS 10 and connect the other end of the subwoofer cable to that jack Diagram 1 Connecting to a System with a Subwoofer Preamp Output SUBWOOFER VOLUME Outlaw uw Sax AUTO ON OFF _ INACTIVC 4 ACTIVE ECS 10 ELA LOW PASS CROSSOVER 120 Hz 40Hz SERIAL No MADEINMALAYSIA A WARNING INTERNAL SUBWOOFER X OVER DIRECT PHASE De SN LE SPEAKER LEVEL INPUT SEE ECS 10 Enhanced Cube Subwoofer 5 Owner s Manual Wiring Diagrams but with Standard Left Right Preamp Outputs SUBWOOFER VOLUME Outlaw Pere AUTO ON OFF macn ACTIVE ECS 10 Bellen LOW PASS CROSSOVER e 120 Hz 40 Hz INTERNAL SUBWOOFER POWER X OVER cS DIRECT 180 a ms cD R L OUTPUT O INPUT CO N LFE SPEAKER LEVEL IN PUT FRONT RIGHT Diagram 2 Connecting to a System without a Subwoofer Preamp Output FRONT LEFT SURROUND RIGHT CAUTION AVIS R
4. covered by our warranty The Outlaw Audio 30 Day Satisfaction Guarantee This product is guaranteed to satisfy all your needs for a high performance sub woofer system If for any reason you are not completely satisfied with it please contact us at 866 OUTLAWS 688 5297 within 30 days of receipt of the unit and you will receive a return authorization Please save all of your packing material in that the ECS 10 is heavy and can get damaged in shipping without proper protection We recommend that you keep the packing even after 30 days so that if you ever move the unit will be adequately protected If you decide to return the ECS 10 the only cost you will be responsible for is the shipping charge to return it to us When your subwoofer arrives we will inspect it to insure that it was shipped back to us in original condition Upon satisfactory inspection we will issue a full credit for your original purchase price 10 Outlaw Audio ECS 10 Enhanced Cube Subwoofer Specifications Woofer 10 inch front firing 8 inch piston diameter Magnet Structure 21 6 lbs Voice Coil 3 inch Dual Layer Magnetic Shielding Yes Amplifier Class D 1000 watts RMS Power 2000 watts Dynamic High Pass Crossover 80 Hz Low Pass Crossover 40 Hz 120 Hz Phase 0 or 180 Frequency Response 23 120 Hz 3 dB Inputs Gold plated line level and speaker level Outputs Line level 80 Hz
5. for any reason To minimize the size of the carton in storage you may wish to flatten it by carefully opening the top and bottom flaps and folding the carton flat Packing materials that cannot be collapsed should be saved along with the carton in a plastic bag Before You Begin Before proceeding with the integration of the ECS 10 into your system please observe the following precautions and suggestions Do not plug the power cord into the ECS 10 until all other connections are made Always refer to the instructions that came with the receiver or processor for specific procedures warnings and options Make sure to insert all plugs and connectors securely Improper connections can result in noise poor performance or damage to the equipment Donot bundle the subwoofer cable or speaker wire with the power cord This may adversely affect the sound quality and introduce unwanted hum into your system ECS 10 Enhanced Cube Subwoofer a Owner s Manual Subwoofers Bass and Overall System Performance Subwoofers Bass and Overall System Performance The goal of an audio system is to recreate the source material as accurately as possible The components needed to perform this task are an audio source a receiver or processor amplifier combination and speakers In the era of digital multi channel sound many listeners have chosen to use frequency limited satellite speakers for the front center and surround ch
6. rugs or carpets or place heavy objects on them Damaged power cords should be replaced immediately with cords meeting factory specifications Wiring Cables that are run inside of walls should have the appropriate markings to indicate com plaince with and listing by the UL CSA or other standards required by the UL CSA NEC or your local building Questions about cables inside of walls should be referred to a qualified customer installer or a licensed electrician or low voltage contractor EW Outlaw Audio Do Not Open The Cabinet There are no user serviceable components inside this product Opening the cabinet may present a shock hazard and any modification to the product will void your guarantee If water or any metal object such as a paper clip coin or a staple accidentally falls inside the unit disconnect it from the AC power source immediately and contact Outlaw Audio for further instructions FCC Information for User CAUTION ANY changes or modifications not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment NOTE This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not i
7. Enhanced Cube Subwoofer ECS 10 veces Owner s Manual Owner s Manual Please Read First Please Read First CAUTION RISK OF ELECTRIC SHOCK DONNOK CAUTION To reduce the risk of electric shock do not remove the cover or back No user serviceable parts inside Refer to qualified personnel WARNING To reduce the risk of fire or electric shock do not expose this appliance to rain or moisture The lightning flash with arrowhead within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous volt age within the product s enclosure that may be of sufficient magnitude to constitute a risk of electrical shock to persons The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating maintenance servicing instructions in the literature accompanying the appliance Precautions Verify The Line Voltage Your new Enhanced Cube Subwoofer has been factory configured for 120 volt AC lines Connecting an ECS to a line voltage other than that for which it is intended can create a safety and fire hazard and may damage the subwoofer If you have any questions about the voltage requirements for your specific model or about the line voltage in your area contact Outlaw Audio before plugging the unit into a wall outlet Verify AC Circuit Capacity The high power output of your Outlaw ECS may require heavy power draw under f
8. ISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR Amplifier ITAL OUTPUT TRIS MOE Comptes wit PART 15 OFTHE FEC ROLE Receiver or Processor 5 Plug the ECS 10 s power cord into an un switched AC outlet CAUTION Due to the power requirements of the ECS 10 it must not be connected to the accessory outlets on a receiver or processor If a power strip or surge protector is used make certain that it is rated to accommodate the ECS 10 s power requirements 6 Reconnect your processor or receiver to the AC power source 7 Proceed to the Setting the ECS 10 s Controls section to learn about the ECS 10 s controls and how they operate Connecting to a System without a Subwoofer Preamp Output but with Standard Left Right Preamp Outputs If your system does not have a dedicated subwoofer preamp output but has left right preamp outputs you can use these jacks to connect your receiver or processor to the subwoofer amplifier See Diagram 2 below 6 Outlaw Audio To connect an ECS 10 Subwoofer using standard Left Right preamp outputs Turn off all system components and unplug the processor or receiver and the ECS 10 from their AC power source Locate the Left Right preamp outputs on the rear panel of your receiver or processor Some audio products that do not offer digital s
9. ain speakers are most in phase Use program materials with bass in the crossover region such as music containing bass drums double basses bass guitar etc to determine the correct setting Variable Crossover By adjusting the variable crossover on the ECS 10 you can perfectly match the ECS 10 to your main speakers If your receiver or processor already has a built in crossover disable the crossover on the ECS 10 by flipping the LOW PASS X OVER switch to the SUBWOOFER DIRECT position Refer to the owner s manual for your receiver or processor to see how to disable any internal crossover capability it may have If your receiver or processor does not have internal crossover control follow these steps to set ECS 10 s variable crossover Determine the 3dB point of your main speakers This frequency is usually found on the speaker s specifications sheet or may often be available on the speaker manufacturer s web site Start with the crossover set approximately to this point By experimenting with the crossover frequency and level control you can fine tune the ECS 10 so that there is a seamless link between the ECS 10 and the main speakers If the actual 3dB point cannot be obtained from the speakers specifications or the manufacturer s web site you can use the following chart as a guideline 40 Hz Large tower speaker with one 12 or 15 in woofer or two 10 in woofers Small tower speaker with one 10 inch wo
10. always check the markings on the rear 7 panel to insure to and to connections Plug the ECS 10 s power cord into an un switched AC outlet CAUTION Due to the power requirements of the ECS 10 it must not be connected to the accessory outlets on a receiver or processor If a power strip or surge protector is used make certain that it is rated to accommodate the ECS 10 s power requirements Reconnect your receiver and or amplifier to the AC power source Proceed to the Setting The ECS 10 s Controls section to learn about the ECS 10 s controls and how they operate Diagram 3 Connecting to a System with No Preamp Outputs SUBWOOFER VOLUME Outlaw un ECS 10 LOW PASS CROSSOVER e 120 Hz 40 Hz INTERNAL SUBWOOFER X OVER DIRECT o PHASE E9 180 OO INPUT N LFE SPEAKER LEVEL INPUT R k FRONT RIGHT FRONT LEFT SURROUND RIGHT TONT OPEN CAUTION OF BETRE SOCS A Az AVIS RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR WARNIN HAZARDOUS CONNECTION Receiver or Amplifier ECS 10 Enhanced Cube Subwoofer 7 Owner s Manual Subwoofer Placement Subwoofer Placement Placement of your subwoofer is a critical component in maximizing the per formance of your ECS 10 Placement influences the subwoofer s perceived frequency response sound pressure level SPL and overall accuracy Since each
11. annels By limiting their frequency range these speakers may be made smaller to more easily fit into a wide range of spaces However by eliminating the capability to reproduce bass frequencies a separate speaker that is custom designed to deal with signals below 200Hz is required That speaker along with its companion built in amplifier is a powered subwoofer Even in two channel systems with traditional bookshelf or tower speakers the bottom two octaves of sound 20 Hz to 80 Hz are frequently rolled off or not reproduced at all Here too a specialized speaker amplifier combination is required to deliver the full spectrum of sound from a system Finally many multi channel digital soundtracks contain a special audio channel devoted specifically to extreme low frequency extension This signal is the 1 in 5 1 6 1 and 7 1 systems and is sometimes referred to as the LFE channel Regardless of which of these situations create the need a subwoofer is absolutely essential for accurate audio reproduction of both movies and music A properly designed subwoofer such as the Outlaw ECS 10 can provide a visceral impact that most speakers are not able to provide on their own No matter what type of speakers comprise the rest of your system or what your favorite movie or music is the ECS 10 is up to the task of completing the sonic presentation by providing the impact that only a subwoofer can provide ECS 10 Rear Panel Outlaw ECS 10
12. e added effort The procedure for placement of the second subwoofer is identical to that of de termining the placement of the first subwoofer see the Subwoofer Placement section of this manual However the second sub should be placed in the seating area outside of the sweet spot where good bass response is also required Walk around the room until you find the area where the bass sounds the best just as described in the process for locating a single sub This spot will almost always be different than the one that was best for the primary sub NOTE When calibrating your second subwoofer be sure to turn off the first sub This will help you to determine ideal placement without being mislead by the response of the first sub When calibrating the final levels of each subwoofer you may want to reduce their output to compensate for the added 3 or 4 dB of gain created by using two subwoofers together If you sense a loss of bass output after properly locating and calibrating both units in a two subwoofer system the likely problem is that the two units are out of phase with each other If this occurs try flipping the phase switch on the back of one or both of the subwoofers until the bass returns For more informa tion regarding the phase control function please read the Setting the ECS 10 s Controls section of this manual Owner s Manual Troubleshooting Care and Maintenance Cleaning When the ECS 10 Subwoofer cabi
13. ect or replace the defective product or the defective parts or components thereof at no charge to the owner for parts and labor covered by this warranty If necessary repairs are not covered by this warranty or if a unit is examined which is not in need of repair you will be charged for the repairs and or the examination If non warranted repairs are needed we will notify you of the estimated cost and ask for your authorization to perform said repairs You must pay shipping charges incurred in getting your Product to the fac tory We will pay the return shipping charges if the repairs are covered by the warranty Please save the original shipping cartons as the unit MUST be returned in the original carton and packing Replacement cartons are available at a modest charge If your product needs service please call Outlaw Audio LLC at 866 OUTLAWS 688 5297 or 866 OUTLAWA 688 5292 You will need to present the original bill of sale to establish the date of purchase In the event that the proof of purchase cannot be established with the original receipt the warranty period shall be determined by the earliest date of manufacture shown on the unit provided that the serial number label has not been altered in any manner or by our records relating to that serial number In the event that you wish to return your Outlaw ECS back to us for any reason please call to arrange for a Return Authorization Number This will insure that your probl
14. em is discussed with a service technician who will determine if there is a quick solution to your problem Outlaw Audio shall not be liable for in any way responsible for any incidental or consequential damages of any kind Some states do not allow limitations on how long an implied warranty lasts and or do not allow the exclusion of incidental or consequential damages therefore the limitations and exclu sions stated herein may not apply to you This warranty gives you specific legal rights and you may also have other rights which vary from state to state THERE ARE NO WARRANTIES GIVEN BY OUTLAW AUDIO WHICH EXTEND BEYOND THE DESCRIPTION GIVEN HEREIN ANY IMPLIED WARRANTIES OF FITNESS FOR PURPOSE SOLD MERCHANTIABILITY DESCRIPTION QUALITY OR ANY OTHER MATTERS ARE LIMITED TO THE TERMS OF THE EXPRESSED LIMITED WARRANTY STATED HEREIN Products are sold on the basis of specifications applicable at the time of sales Outlaw Audio shall have no obligation to modify products once they have been sold This warranty is applicable only in the United States For applicability in other countries please call Outlaw Audio outiaw Outlaw Audio ECS 10 Enhanced Cube Subwoofer Pu
15. ing units Owner s Manual Outlaw Audio Enhanced Cube Subwoofer ECS 10 Outlaw Audio Enhanced Cube Subwoofer ECS 10 Congratulations on the purchase of an Outlaw Audio ECS 10 Enhanced Cube Subwoofer The ECS 10 provides deep tight bass extension that s powerful enough to meet the most demanding requirements of any movie or musical source Thanks to a flexible crossover system that may be defeated for use with advanced bass management systems the ECS 10 blends seamlessly with both small satellite speakers as well as large tower type speaker systems The ECS 10 s high power and long throw woofer are housed in a cabinet that measures just over a cubic foot ensuring that your new subwoofer can be tucked away out of sight in almost any listening environment Among the ECS 10 s many features are m A long throw 10 driver for deep bass extension Oversized spider for increased linearity at high excursion A powerful 1 000 watt RMS 2000 watts dynamic amplifier for precision driver control m Signal Sense for automatic turn on off can be defeated 0 180 degree phase control m Stereo line level and speaker level inputs m LFE input Unpacking The carton and packing materials used in shipping your new subwoofer were specially designed to cushion it from the shocks and vibrations of shipping We strongly suggest that you save the carton and packing materials to use if you move or if the unit ever needs to be shipped back to us
16. listening room differs in virtually every aspect the ideal location will also vary An easy way to find the right spot to place your new ECS 10 is to experiment with what we call the Subwoofer Switch Trick This process puts the subwoofer where you normally sit and then lets you play the role of the subwoofer Place the subwoofer as close to your favorite listening position as possible If pos sible place the unit in front of your couch or easy chair right in the room s sweet spot Provided that there is no damage to your furniture you may even place the subwoofer on the chair or couch but remember that the ECS 10 is heavy and the Outlaws are not responsible for any damage to your furniture or for arguments this might cause with other members of the household Activate the test tone from your processor or receiver s internal test tone generator or use your favorite test disc so that pink noise plays through the subwoofer While the test tone is playing walk around your room to find the spots where you hear the best bass response Sometimes this may be in the center of the room while in other cases you may find the best spot in a corner or along a side wall Turn off the test tone and move the subwoofer to the location where you hear the best bass response If that location is unacceptable or impractical repeat the procedure to the spot that is the best compromise between bass performance and aesthetic considerations Notes O
17. ll play a roll in bass per formance These factors create peaks and dips in the level of low frequencies at different points in the room That said two properly positioned subwoofers will distribute the bass throughout the room with greater accuracy than a single sub For this reason many professional acousticians and installers recommend more than one subwoofer The final result is that you will create a much larger sweet spot where the bass is powerful but more importantly smooth and consistent If near perfect bass response is your goal consider using two ECS 10 Subwoofers What s Needed to Connect Two Subwoofers Most of today s digital receivers and preamp processors provide a single subwoofer output Connecting two subwoofers to these systems is as simple as adding a Y adapter A Y adapter splits a single output into two separate outputs Be sure to use a Y adapter that is of equal or better quality than the subwoofer cables you intend to use We recommend the Outlaw Audio PCA Y Adapter To use the Y adapter insert the single male end of the cable to the subwoofer output of your receiver or processor On the opposite end of the Y adapter you will now have two separate subwoofer outputs one for each sub Placement and Level Control Placement and level control of two subwoofers is somewhat more complicated than using a single subwoofer However the end result of two properly placed and calibrated subwoofers is well worth th
18. n Subwoofer Placement Try to avoid creating a listening position that falls directly between the front and back walls and this may cause a strong interference effect due to the collision between bass waves bouncing off the rear wall and new bass waves from the ECS 10 When this happens you might hear an unnatural build up in the low frequencies where the bass sounds bloated based on the specific dimensions of the room and the particular frequency being reproduced In other situations you might encounter a null which is caused by two low frequency waves canceling each other out When this happens you will find that your favorite listening position is bass shy In this type of placement situation bass response will suffer greatly regardless of how powerful the subwoofer is The best way to solve this problem is to change the location of the seating position so that the distance to the front of the room is different than that to the back of the room 8 Outlaw Audio Setting the ECS 10 s Controls Phase Switch Depending on the absolute phase of your main speakers and amplifier as well as the relative distance from the ECS 10 and main speakers to the listening position the bass in the crossover region may be smoother if you reverse the phase of the ECS 10 Try both positions of the phase switch to determine which way sounds more bass heavy The bass heavier position is the setting where the output of the ECS 10 and the m
19. net becomes dirty wipe it with a clean soft dry cloth If necessary first wipe the surface with a soft cloth slightly dampened with mild soapy water then with a fresh cloth dampened with clean water Wipe dry immediately with a dry cloth NEVER use benzene thinner alcohol or any other volatile cleaning agent Do not use abrasive cleaners as they may damage the finish of the metal parts Avoid spraying insecticide waxes polishing agents or any aerosol product near the unit When You Are Away If you will not be using your home theater system for an extended period of time it is always a good idea to turn the unit off using the Master Power Switch on the rear panel of the subwoofer This will prevent the automatic turn on circuits from accidentally powering the system on during your absence Troubleshooting Your ECS 10 Subwoofer is designed for trouble free operation If you follow the instructions in this manual you should experience many years of high quality listening enjoyment However as with any sophisticated electronic device there may be occasional problems upon initial installation or during the life of the unit Troubleshooting Guide The table below provides a brief list of minor problems that you may be able to correct yourself If these solutions do not rectify a problem or if the problem persists contact us for assistance Humming or Buzzing Noise Power down your system and remove the Interconnects between y
20. nnect your processor or receiver to the AC power source 4 9 Proceed to the Setting The ECS 10 s Controls section to learn about the ECS 10 s controls and how they operate Connecting to a System with no Preamp Outputs If no low level subwoofer or standard left right output is available you will need 5 to run speaker wires from your main amplifier or receiver to the subwoofer amplifier See Diagram 3 below 6 To connect the ECS 10 using high level inputs Owner s Manual Subwoofer Placement Turn off all system components and unplug the receiver and or amplifier and the ECS 10 from their AC power source Locate the front left right speaker output terminals on your receiver or amplifier In cases where there are both A and B terminals the A terminals should be used Disconnect any wire that is presently connected to these terminals Using the same type of speaker wire used for your other speaker connections connect the left and right channel speaker outputs of your receiver or amplifier to the ECS 10 s Speaker Level Input NOTE Be sure to connect the speaker wires to the appropriate input binding posts located on the back of the ECS 10 making certain that the polarity on the receiver or amplifier matches the polarity on the binding posts of the subwoofer amplifier In most cases this means connecting the red terminal on the receiver or amplifier to the red terminal on the ECS 10 but
21. nstalled and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures e Reorient or relocate the receiving antenna e Increase the separation between the equipment and receiver e Connect the equipment into an outlet on a circuit different from that to which the receiver is connected IMPORTANT SAFETY NOTE Before connecting a new component such as the ECS to your audio or home theater system it is always good practice to make certain that all components are turned off and preferably unplugged from their AC power source Many modern electronics products feature automatic turn on circuits that may be activated during an installation causing the potential for damage to electronic components and or speakers Such damage is not covered by product warranties and Outlaw Audio specifically disclaims responsibility for any such damage For Future Reference Record your subwoofer s serial number and date of purchase here It is found on the back panel Model Number Serial Number Date of Purchase Table of Contents Please Read First Table of Conte
22. nts Outlaw Audio Enhanced Cube Subwoofer ECS 10 Unpacking Before You Begin Subwoofers Bass and Overall System Performance ECS 10 s Controls and Connections Setup Guide Connecting to Your System Connecting to a System with a Subwoofer Preamp Output nun unwuwurt FW www n Connecting to a System without a Subwoofer Preamp Output but with Standard Left Right Preamp Outputs Connecting to a System with no Preamp Outputs Subwoofer Placement Notes On Subwoofer Placement Setting the ECS 10 s Controls Phase Switch Variable Crossover Volume Level The Scattered Subwoofer System Two ECS 10 s What s Needed to Connect Two Subwoofers Placement and Level Control Care and Maintenance Cleaning When You Are Away Troubleshooting Troubleshooting Guide o OW co co wpevveovVrowennnen 10 Outlaw Service Information 10 The Outlaw Audio 30 Day Satisfaction Guarantee 10 ECS 10 Enhanced Cube Subwoofer Specifications 11 Outlaw Audio Limited Warranty The contents of this manual are Copyright 2009 by Outlaw Audio LLC and may not be duplicated or reproduced by any means whether physical electronic or otherwise without prior written consent from Outlaw Audio Outlaw Audio and the Outlaw Audio logo are registered trademarks of Outlaw Audio LLC Specifications are those in effect at the time of printing Outlaw Audio reserves the right to change specifications or designs at any time without notice or obligation to modify exist
23. ofer or two 8 inch woofers 60 Hz Small tower or large bookshelf speaker with one 8 in or two 6 in woofers 80 Hz Bookshelf speaker with one 6 in or two 5 in woofers 100 Hz Bookshelf speaker with one 5 in woofer or two 4 in woofers 120 Hz Satellite speaker with one 4 in woofer or one or two 3 5 in woofer s Volume Level Using the built in test tones of your receiver processor match the levels of all of your speakers including the ECS 10 as described in your receiver or processor s owner s manual A setting of 5 on the ECS 10 s volume knob should provide enough gain to properly match the sub level to your speakers We recommend using an SPL meter such as the Radio Shack part number 33 2050 When using the test tones measure from the listening chair and set the meter to the 75 dB level In order to accurately measure levels between channels use C weighting and the slow setting Note The Radio Shack meter is down about 12 dB at 16 Hz 7 dB at 20 Hz and 4 dB at 25 Hz Add these numbers to the readout to compensate for these errors if necessary The Scattered Subwoofer System Two ECS 10 s Why Two Subwoofers In most circumstances two subwoofers will perform better than one While you might assume this is for added SPL the greatest benefit will actually be smoother bass response Room shape the cubic volume of the room width x depth x height furniture floor coverings and even wall and ceiling material a
24. our components Power your system back on If the hum goes away when the interconnects are disconnected the hum is coming from the rest of your equipment Plug In the Interconnects one at a time for each component until you come across the specific component generating the hum No output from the subwoofer Blue LED does not light up Check that the power cord is plugged in securely at both ends and make sure that the power outlet the subwoofer is plugged into is functioning properly Recheck the connections between the receiver processor and the subwoofer On the back of the subwoofer make sure the power switch is set to auto or on The subwoofer is not receiving a signal No output from the subwoofer Connect the signal cable to another subwoofer or amplifier If you get output then the amplifier is faulty Email or call technical support for authorization to send the amplifier back for service ECS 10 Enhanced Cube Subwoofer Ea Owner s Manual Specifications Outlaw Service Information The Outlaw Audio ECS 10 Subwoofer does not contain any user serviceable parts If you suspect a problem that may require service assistance call us at 866 688 5292 Itis important that only a service agent authorized by Outlaw Audio carry out any repairs Keep your sales slip or receipt in a safe place with this manual so that it will be available to verify the purchase date should you experience a problem
25. ull load conditions To insure proper performance and to avoid potential safety hazards we recom mend that it be connected to a 20 Amp capacity circuit Connecting multiple subwoofers to the same circuit or connecting it to a circuit used by other heavy power devices such as air conditioners may cause circuit breakers to trip NOTE t is always a good idea to avoid using any audio or video equipment on the same AC circuit as equipment with motors such as air conditioners or refrigerators This will lessen the possibility of power variation and electrical start up noise affecting your sound system Extension Cords and Power Strips We do not recommend that extension cords be used with this product unless they are of sufficient gauge to pass the necessary current during full load conditions Most inexpensive extension cords are not capable of such high current loads Similarly should you use a power strip surge protector or any type of AC power line con ditioning equipment make certain that it is also able to handle the high current loads this product will produce Handle the AC Power Cord Gently When disconnecting the power cord from an AC outlet always pull the plug never pull the cord Ifyou do not intend to use the amplifier for any considerable length of time disconnect the plug from the AC outlet If the power cord is replaced make certain that it is of similar gauge As with all electrical devices do not run power cords under
26. urround processing will have these types of jacks If your receiver or processor does not have this type of output you will need to follow the Connecting to a system with no pre amp outputs instructions that follow this section 3 Connect one end of the audio interconnects to the left and right preamp outputs on the receiver or processor 4 Locate the connections labeled INPUT on the rear panel of the ECS 10 and connect the other end of the interconnects to these jacks 5 If you are using a separate power amplifier connect a second set of 1 interconnects to the connections labeled OUTPUT on the ECS 10 power amp Note The ECS 10 s line level output is bandwidth limited to signals above 80Hz This enables you to use the ECS 10 with small satellite speakers by limiting the amount of low frequency information they will be asked to reproduce Subsequently the reduced demand on your power amplifier and speakers will result in better sound across the board 3 6 Locate the corresponding amplifier channels on your dedicated power amplifier and connect the other end of the interconnects to these jacks 7 Plug the ECS 10 s power cord into an un switched AC outlet Due to the power requirements of the ECS 10 it must not be connected to the accessory outlets on a receiver or processor If a power strip or surge protector is used make certain that it is rated to accommodate the ECS 10 s power requirements 8 Reco
27. ver processor or other source device or accessory to this jack s HIGH LEVEL INPUTS When your receiver does not have line level outputs available for a subwoofer connection connect the speaker outputs of the receiver here Owner s Manual Setup Guide Setup Guide Connecting To Your System To get the maximum performance from your new ECS 10 it must be properly connected positioned properly within the room and configured to match your speakers To connect the ECS 10 you will need either a single audio interconnect cable in the case of systems with a subwoofer output a pair of audio intercon nects in the case of systems without a left right pre amp outpt or additional speaker wire We recommend the Outlaw Audio PCA SUB cable but any high quality shielded audio interconnect will work properly Connecting to a System with a Subwoofer Preamp Output If a low level subwoofer output is available use this jack to connect your ECS subwoofer to your Preamp or Receiver See Diagram 1 below To connect the ECS 10 to a subwoofer preamp output 1 Turn off all system components and unplug the processor or receiver and the ECS 10 from their AC power source 2 Locate the Subwoofer LFE Output on the rear panel of your receiver or processor Any audio product that decodes Dolby Digital or DTS soundtracks will have this type of jack Depending on the particular brand or model this RCA jack may be labeled Sub Subwoofer
Download Pdf Manuals
Related Search