Oricom 310 Baby Monitor User Manual
Contents
1. DECT Ooricom gital Baby Monitor Secure 310 185 TECHNOLOGY User Guide 0 TABLE OF CONTENTS 3 IMPORTANT SAFETY 7 7 4 GETTING STARTED 47 7 ORICOM DIGITAL BABY MONITOR nnn 8 SETTING UP 12 USING YOUR DIGITAL BABY MONITOR 17 25 27 IMPORTANT SAFETY INFORMATION Important Safety Information Itis very important that you read the User Guide carefully as it contains detailed information you will need to get the most from your Oricom Baby Monitor If you have any issues setting up or using your Oricom Baby monitor please call our Customer support team Our dedicated local team are more likely to be able to help you than the retailer where you made your purchase e Your ORICOM Baby Monitor is designed to be an aid and should not be used as a substitute for responsible and proper adult supervision of a child The Baby Monitor has been designed to provide some added reassurance in the form of sound transmission for those times when you are not in the same room as your baby provided you always stay within hearing range of the baby monitor during use Your Baby Monitor is not a medical device nor a device to prevent cases of2. Oricom Digital Baby Monitor call our Support team on 1300 889 785 If you would like any additional or replacement rechargeable batteries for the parent unit Part No BAT1300MAH order online at www oricom com au Our dedicated advisors are more likely to be able to help you than the retailer where you made your purchase Alternatively you may find the answer in the Help section at the back of this guide Additional answers to Frequently Asked Questions are also available from www oricom com au Got everything Baby unit Parent unit 2 X AA NiMH 1300mAh rechargeable batteries for Parent unit pre installed Parent unit charger 2 x power adaptors 8 7 00 Parent unit Lanyard attach point top of unit You can loop a lanyard not supplied through here Mute All on top of unit Press to toggle the Parent unit receive volume between on and off Mute Low on top of unit Press to toggle the Baby unit microphone sensitivity between normal and Mute Low Talk on side of unit Press to talk to your baby Mute LED Steady red indicates that Mute All has been switched on Amber indicates that Mute Low has been switched on Vol Decrease speaker volume cmi iw Power on off on top of unit Press and hold to switch the power on or off Baby sound level LEDs Indicates the level of received sound The LE Ds will light up progressively as the sound
3. Sudden Infant Death Syndrome SID S or cot death and you should not rely on it for your baby s wellbeing It is important that you regularly check on your baby personally Make sure the Baby unit Parent unit and mains adaptor cables are kept out of reach of your baby and other young children at all times at least one metre away Never place the baby unit or parent unit inside your baby s cot bed or playpen Never cover the Parent or baby units with clothes towels or blankets or any other item Never use or place your Parent or Baby unit in or near moisture or water e g near bath or pool Immersing in water could cause electric shock and even death IMPORTANT SAFETY INFORMATION iia The installation location plays an important role in ensuring proper operation Therefore maintain a distance of at least one meter from other electronic equipment such as microwave ovens or hi fi devices otherwise they could cause interference During continual use the Baby unit power adaptors may become warm to the touch This is normal and should not be a concern Risk of suffocation Keep all packaging materials and protective foils out of reach of children Do not place the AC Adaptor cable in a high wear and tear location Never use a frayed or compromised cord Battery safety Batteries represent a hazard to health and the environment They contain toxic ecologically hazardous heavy metals Do not dispose of batteri
4. default settings Resetting the units is only advisable if you are experiencing difficulties with your product It is a useful feature that ensures your Baby Monitor is returned to its new out of the box settings 24 USING YOUR DIGITAL BABY MONITOR Reset the Parent unit 1 Within 3 seconds of the Parent unit being switched on press and hold the W button for at least 10 seconds The display will show Reset for 2 seconds during the reset and then you will hear a confirmation beep once the reset has been performed Reset the Baby unit 1 Within 3 seconds of the Baby unit being switched on press the button for at least 10 seconds You will hear a confirmation beep once the reset has been performed TROUBLESHOOTING 25 Should you experience difficulties operating the SC310 please refer to the troubleshooting guide below If you still experience difficulties please contact Oricom Customer Support on 1300 889 785 for assistance Troubleshooting Problems Link light does not come on Solutions Check that both the Baby and Parent units are switched on Check that the batteries in the Parent unit are correctly installed and that they are charged Check that the mains power is plugged in and Switched on at the Baby unit Check that the units are within range of each other Link light is flashing green Link indicator is flashing red f you have pressed to use the Talk Back feature the Link
5. increases See page 18 for further informa ion Low battery status indicator Red light indicates the batteries are low and ne ed re charging Link status indicator Steady green indicates that the Baby and Parent units are linked Flashes green if not linked for the fi rst 30 seconds Flashes red if not linked for longer than 30 seconds Also flashes green when the Talk button is Parent unit to talk back Microphone Vol Increase spea pressed on the initiate parental ker volume ORICOM DIGITAL BABY MONITOR 9 Parent unit charger Front Charging light Red when the Parent unit is correctly placed on the charger Back A 5 3 Power socket For connection to the mains power socket via the power adaptor cable supplied 10 Baby unit Microphone Nightlight Press to switch the Nightlight on or off Power on off Press and hold to gt switch the power on or off Find Press to emit an 3 alert beep from the Parent unit useful for finding the Parent unit if Link you ve misplaced it Link indicator Steady green indicates that the Baby and Parent units are linked Flashes green if not linked for the first 30 seconds X Flashes red if not linked for Nightlight illuminates longer than 30 seconds around the base Also flashes green when the Talk button is pressed on the Parent unit
6. the instructions set out in this user guide for the proper installation and use of the product negligence on your part or misuse by you of the product an uncontrollable external cause which results in the product not functioning including but not limited to power failure lightning or over voltage and fA ala 29 4 modification to the product or services carried out on the production by anyone other than Oricom or Oricom s authorised service provider Oricom will not be liable for any damages caused by the product or the failure of the product to perform including any lost profits or savings or special incidental or consequential damages Oricom is not liable for any claim made by a third party or made by you on behalf of a third party This limitation of liability applies whether damages are sought or a claim made under this Warranty or as a tort claim including negligence and strict product liability a contract claim or any other claim However this limitation of liability will not apply to claims for personal injury Nothing in this Warranty excludes restricts or modifies any condition warranty right or remedy which pursuant to the Competition and Consumer Act 2010 applies to this Warranty and which may not be so excluded restricted or modified For warranties that cannot be excluded restricted or modified Oricom limits the remedies available to those specified in the relevant legislation 9 Customer Support If
7. you have any problems setting up or using this product you will find use full tips and information in the Troubleshooting section of this user guide as well as Frequently Asked Questions on our website www oricom com au If you have further questions about using the product after reviewing the resources above or would like to purchase replacement parts or accessories please call our Customer Support Team Our dedicated local support team are more likely to be able to help you than the retailer where you made your purchase Please retain your purchase receipt and attach to the back page of this user guide as you will need to produce this if warranty service is required Take a few moments to register your product online www oricom com au Australia Australia Oricom International Pty Ltd Email support Locked Bag 658 Phone 1300 889 785 South Windsor NSW 2756 Monday to Friday 8am to 6pm AEST Web www oricom com au Fax 02 4574 8898 New Zealand Email support oricom co nz Phone 0800 674 266 Monday to Friday 10am to 8pm NZST Web www oricom co nz
8. Baby unit Switch Baby unit nightlight on off 1 To switch on press the button 2 To switch off press the button The Baby unit must be switched on for the nightlight to work but need not be linked to the Parent unit Find You can press the button on the Baby unit to make the Parent unit sound an alert to help you find it if its been misplaced If the Parent unit loudspeaker volume had been Muted or set to volume off the volume level will be reset to the default setting of Level 3 1 Press on the Baby unit The paging alert will sound at the Parent unit 2 To stop the alert press any button on the Parent unit or press the button again on the Baby unit If no button is pressed after 2 minutes then the alert will automatically stop USING YOUR DIGITAL BABY MONITOR 23 List of tones Your Baby Monitor unit can produce various tones They have the following meaning Tone Meaning Single tone Confirmation tone e g setting saved Double tone fast Error tone e g max volume reached when adjusting volume Double tone slow User alert e g crying alert paging alert etc Triple tone fast System alert e g link lost battery low etc User Alert tones can be silenced by pressing any button on the Parent unit System Alerts can be silenced for a 5 minute period by pressing any button on the Parent unit Reset the units Resetting either units will return the settings at that unit back to its
9. d noise this is normal The units are designed to be located at a distance from one another e g in separate rooms USING YOUR DIGITAL BABY MONITOR Switching on off Switch the Baby unit on 1 Press and hold the button for 1 second The nightlight will briefly illuminate and then the green Link indicator will flash until it links with the Parent unit Once linked the green Link indicator will remain on Switch the Parent unit on 1 Press and hold the button on the Parent unit until all the LEDs briefly illuminate The green Link indicator will flash Once the units are linked the green Link indicators on the Parent and Baby units will stop flashing and remain a steady green The units are now ready to use Switch the Baby unit off 1 Press and hold the button on the Baby unit The green Link indicator will switch off Switch the Parent unit off 1 Press and hold the button on the Parent unit until an audible alert sounds The green Link indicator will switch off and the display will switch off 18 Baby sound level LED indicators LEDs 1 2 Green LEDs 3 4 Green LEDs 5 7 Red or Amber if Mute Low is on Ve The seven LEDs across the top of the Parent unit light up to indicate the level of sound being received from the Baby unit The LEDs light up progressively as the sound increases LEDs 1 2 light up Green or Amber if Mute Low is on see page 18 when sounds of 57dB and 63dB are receiv
10. ded product in which they are installed whichever is longer 28 During the Warranty Period Oricom will where possible repair and if not replace the faulty product or part thereof component parts removed under this Warranty become the property of Oricom In the unlikely event that your Oricom product has a re curring failure Oricom may subject to the Competition and Consumer Act 2010 at its discretion elect to provide you with a replacement product of its choosing that is at least equivalent to your product in performance Oricom does not warrant that the operation of the product will be uninterrupted or error free Oricom is not responsible for damage that occurs as a result of your failure to follow the instructions that came with the product These terms and conditions together with any specific terms and conditions contained in the user guide to the product purchased constitute the complete and exclusive agreement between you and Oricom regarding the product No change to the conditions of this Warranty is valid unless it is made in writing and signed by an authorised representative of Oricom Oricom will not be in breach of a warranty expressly set out in this User Guide or under the Competition and Consumer Act 2010 and excludes any liability for damages or any other remedy arising under any other legislation or the common law if the damage occurs as a result of failure by you to adhere to the warnings and follow
11. ed LEDs 3 4 light up Green when sounds of 69dB and 75dB are received LEDs 5 7 light up Red when sounds of 83dB 89dB or 95dB are received Equivalent sound level examples 60dB 70dB normal conversation 75dB loud conversation 83 95dB loud traffic noise USING YOUR DIGITAL BABY MONITOR Adjust the Parent unit loudspeaker volume There are 5 volume levels and off Mute The default loudspeaker volume is Level 3 1 Press Q or to select the required level You will hear difference in volume as you keep pressing the button s If you wish to switch the volume off keep pressing until the Mute LED turns red Mute All or press the EB button If you try and set the volume higher or lower than the 5 settings available on either unit you will hear an error tone Setting the Parent unit volume to Off is the equivalent of switching the Mute All feature on See page 20 for more information on Mute All 20 USING YOUR DIGITAL BABY MONITOR Mute All feature Parent unit only The Mute All feature prevents any sound coming from the Parent unit loudspeaker With Mute All on you can still monitor your baby using the Baby sound level LED indicators page 18 and the Crying Alert below 1 To switch Mute All on press the button located on the top of the unit The Mute indicator will illuminated red 2 To switch Mute All off press the button again The red Mute indicator will switch off Setting the Parent unit loud
12. es in a fire as they may explode Dispose of batteries according to local regulations never in your household rubbish Do not dismantle cut open crush bend puncture or shred cells or batteries If a battery leaks do not let the battery liquid touch skin or eyes If this happens immediately flush the affected areas with water and seek medical assistance Do not modify remanufacture attempt to insert foreign objects into the battery or immerse or expose it to water or other liquids Batteries may explode if damaged Bie REL Use only the batteries supplied with the product Improper use or use of unapproved batteries may present a risk of fire explosion or other hazard and may invalidate any approval or warranty f you believe the batteries are damaged remove product from the charger and stop using the product Contact Oricom for assistance Never use a damaged battery Disposal Always dispose of your products at the end of their life in accordance with your local waste disposal requirements Packaging materials all cardboard and paper packaging should be recycled in accordance with your local council waste regulations 7 This User Guide provides you with all the information you need to get the most from your Oricom Digital Baby Monitor Please read this guide carefully and keep it for future reference Need help If you need assistance setting up or using your
13. light will flash to indicate one way communication between the units The units are searching for a communication link Check units are within range of one another Check both units are turned on The link between your units is broken You will also hear an alert on the Parent unit to let you know there is no communication between the units If this happens check that the mains power or batteries is correctly connected and that the units are within range of one another See page 15 for instructions on linking the units 26 MuaiejS s B eee Battery low on Put the Parent unit back on the charger to charge Parent unit Place Parent unit back on the charger as frequently as possible or ideally leave it on the charger to ensure the batteries remain charged To shorten the charging time you can turn the Parent unit off if it is not being used while it is charging You may have set the volume too low see page 19 to increase the volume You may have switched a Mute feature on see pages 20 21 You can hear a high The units might be too close to each other pitched noise The volume setting might be too high see page 19 Talk back feature is Check the units are linked not working Parent unit remains silent or very quiet WARRANTY 27 Warranty Information Australia Oricom makes no other warranties or conditions express or implied including as to acceptable quality and fitness for a par
14. nce time of the Parent unit Eventually they will need to be replaced New batteries can be obtained from the Oricom Digital Baby Monitor Support Centre 1300 889 785 The Parent unit rechargeable batteries will lose charge over a period of time even if switched off Battery low warning Parent unit When the batteries are low approximately within 1 hour of running out the Parent unit will emit a low battery alert and the low battery indicator on the unit will turn red Place the Parent unit back on the charger to charge the batteries To speed up the charging process turn the Parent unit off when charging if its not being used You can still use your Parent unit to monitor your baby even when the batteries are low provided it remains in the charger cradle to re charge the batteries Baby unit 1 Plug the remaining power adaptor cable into the socket marked 3 on the back of the Baby unit and plug the other end into the mains power and switch on DC7SV 500 mA 3 5 Switch on and link the Parent and Baby units 1 Press and hold the button on the Baby unit for 1 second The nightlight will briefly illuminate and then the green Link indicator will flash 2 Press and hold the button on the Parent unit until all the LEDs on the unit briefly illuminate The green Link indicator will flash Warning Never use non rechargeable batteries in the Parent unit Only use the recommended type 2 x AA NiMH 1300mAh batte
15. ries Using other types could permanently damage the unit Charge the batteries as instructed in this user guide The Parent unit can still be used when it is in the charger Removing the batteries If you ever need to remove the batteries simply slide open the battery compartment cover and use the ribbon to eject the batteries Once the units are Linked the green Link light on the top of the Parent unit and the green LED on the Baby unit will stop flashing and remain a steady green The units are now ready to use IMPORTANT The link confirmation between the two units is vital for use so they can communicate If the link between the units is broken at any time the Link indicators on the Parent and Baby units will flash green as they try to search for each other After 30 seconds if the link is still broken they will flash red and you will also hear an alert signal from the Parent unit 16 If the link is broken check that the mains power is plugged in and switched on at the Baby unit check that both units are switched on e check that the batteries are charged in the Parent unit check that the Parent and Baby units are within range of each other in ideal conditions the range is up to 300 metres outdoors and 50m indoors Positioning your units The Baby unit should ideally be within 1m 2m of your baby for best performance If you place the Parent and Baby units too close together you will hear a high pitche
16. speaker volume to Volume off is the equivalent of switching the Mute All feature on Crying alert The crying alert will only be activated if Mute All has been switched on or if the Parent unit loudspeaker volume has been switched off see above for information on the Mute All feature With Mute All switched on if your baby starts to cry you will not be able to hear the cries but if the cries sound above a certain level i e if they reach 83dB which is the 1st red Baby sound level LED then the Parent unit will emit an audible beep The crying alert is a user alert as described on page 23 Mute Low For discreet operation when you do not wish to hear any low level sounds you can still monitor your baby using the Baby sound level LED indicators page 18 USING YOUR DIGITAL BABY MONITOR 21 When Mute Low is switched on any sounds from the Baby unit to the Parent unit will be muted unless a sound is made above a set level The set level are sounds that are louder than the first two green LEDs would register as described in Baby sound level LED indicators on page 18 If the or buttons are pressed whilst Mute All or Mute Low has been set then Mute All or Low will be switched off and the loudspeaker volume will return to Level 3 automatically 2 If the Parent unit receives sound up to the level of the first two LEDs then they will turn amber but no sound will be heard if the sound rises above this level then the unit
17. ticular purpose except as stated in this Warranty Any implied warranties that may be imposed by law are limited in duration to the Warranty Period Oricom warrants that the product is free from defects in materials or workmanship during the Warranty Period This Warranty does not extend to any product from which the serial number has been removed or was purchased outside of Australia This warranty in no way affects your statutory warranty rights under the Competition and Consumer Act 2010 or any other similar legislation The Warranty Period will be 3 years from the date of purchase of the product evidenced by your dated sales receipt You are required to provide proof of purchase as a condition of receiving warranty services You are entitled to a replacement product or repair of the product according to the terms and conditions of this document if your product is found to be faulty within the Warranty Period This Warranty extends to the original purchaser only and is not transferable Batteries or Battery Packs if supplied with this product are covered under this warranty for a period of 90 days Products distributed by Oricom are manufactured using new materials or new and used materials equivalent to new in performance and reliability Spare parts may be new or equivalent to new Spare parts are warranted to be free from defects in material or workmanship for thirty 30 days or for the remainder of the Warranty Period of the Oricom bran
18. to initiate parental talk back ORICOM DIGITAL BABY MONITOR Back of Baby unit Power socket For connection to the mains power sc the power adaptor cable supplied 12 Saints Parent unit 1 Plug one of the power adaptor cables into the socket marked 3 the Parent unit charger and plug the other end into the mains power wall socket and switch the power on DC7 5V 2 Activate the batteries by pulling the plastic tab away from back of the Parent unit PULL Rechargeable batteries already fitted Remove this tab and charge batteries for 16 hours before use 13 3 Place the Parent unit into the charger The red charging light will illuminate the charger and the battery icon will start scrolling on the Parent until display to indicate that the batteries are being charged Charging light Leave the batteries to charge for 16 hours to reach maximum charge Only use the power adaptors supplied Using incorrect power may permanently damage your product This product is designed for indoor use only 14 Sao Battery performance Rechargeable batteries in the Parent unit will last up to 20 hours in normal use Please note that new batteries do not reach full capacity until they have been in normal use for several days The charge capacity of rechargeable batteries will reduce with time as they wear out so reducing the performa
19. will un mute so you can hear the sounds To switch Mute Low on press the button located on the top of the Parent unit The Mute indicator will turn amber To switch Mute Low off press the button again The amber indicator will switch off Once the Mute Low sound threshold has been exceeded baby sounds will be able to be heard for a further six seconds even if they do not reach the Mute Low threshold Talk Back You can use the Parent unit Talk Back feature as a one way intercom to comfort and reassure your baby By speaking into the Parent unit your baby will hear your voice from the Baby unit Please note that when using Talk Back you will not be able to hear your baby until you release the button Press and hold down the button on the Parent unit to speak to your baby Whilst the button is depressed the green Link indicators will flash on both units 22 USING YOUR DIGITAL BABY MONITOR You will be able to activate Talk Back mode even if other functions have been activated at the Baby unit like Music playback or Nightlight on Do not press the button when the Baby unit and Parent unit are positioned in the same room High pitch noise will be generated if the button is pressed when Baby unit and Parent unit are close to each other or within 3 metres distance When using Talk Back hold the Parent unit approximately 30cm in front of your mouth when talking to baby Nightlight You can set a comforting nightlight on the
Download Pdf Manuals
Related Search