Omron Healthcare BP785 Blood Pressure Monitor User Manual
Contents
1. pue 4 Morning average from 7 weeks ago with Morning Average Symbol Morning Hypertension Symbol Morning average from This Week with Morning Average Symbol Evening Average Evening average from 7 weeks ago Evening average from This Week with Evening Average Symbol with Evening Average Symbol Morning Hypertension Symbol Average within AHA guidelines Average above AUA guidelines 7 Morning Hypertension USING THE MEMORY FUNCTION The Morning Hypertension Symbol E appears if the weekly average for morning measurements is above 135 85 In this case the Morning Hypertension Symbol E is displayed when the Evening Average is displayed regardless of the values for the Evening Average TO DELETE ALL VALUES STORED IN THE MEMORY The values stored in the memory are deleted by USER ID You cannot partially delete values stored in the memory All values for the user you select will be deleted 1 Select your USER ID A or B 2 While holding the Memory button and the START STOP button simultaneously for more than 2 seconds all values will be deleted 42 CARE AND MAINTENANCE To keep your digital blood pressure monitor in the best condition and protect the unit from damage follow the directions listed below Keep the monitor in the storage case when not in use Make sure the AC adapter is placed under the main unit so that it does not damage the display Avoid kinking or sharply bending the AC Ada2. Staple your purchase receipt here Register your product on line at www register omron com Your new digital blood pressure monitor uses the oscillometric method of blood pressure measurement This means the monitor detects your blood s movement through your brachial artery and converts the movements into a digital reading The monitor stores measurement results for two people and features Morning and Evening Averages TruRead allows for three consecutive measurements with timed intervals for an average reading The BP785 comes with the following components Monitor e ComFit Cuff AC Adapter Storage Case Instruction Manual printed in English and Spanish Quick Start Guide The BP785 IntelliSense Automatic Blood Pressure Monitor is intended for home use SAVE THESE INSTRUCTIONS 4 SAFETY INFORMATION To assure the correct use of the product basic safety measures should always be followed including the warnings and cautions listed in this instruction manual SAFETY SYMBOLS USED IN THIS INSTRUCTION MANUAL Indicates a potentially hazardous situation A WARNING which if not avoided could result in death or serious injury Indicates a potentially hazardous situation which if not avoided may result in minor or moderate injury to the user or patient or damage to the equipment or other property A CAUTION OPERATING THE DEVICE A Contact your physician for specific information about your blood
3. 31 TAKING A MEASUREMENT 3 Inflation stops automatically and the measurement is started As the cuff deflates decreasing numbers appear on the display The Heartbeat Symbol 4 flashes at every heartbeat Oveni ot 1 H 4 i 4 When the measurement is complete the arm cuff completely deflates Your blood pressure and pulse rate are displayed 5 Press the START STOP button to turn the monitor off NOTE The monitor will automatically turn off after two minutes 32 TAKING A MEASUREMENT USING THE TRUREAD MODE 1 Select your USER ID A or B 2 Press the START STOP button All symbols appear on the display The USER ID Symbol you selected flashes on the display The cuff starts to inflate automatically NOTE To stop the inflation or measurement press the START STOP button The monitor will stop inflating start deflating and will turn off 3 Inflation stops automatically and the measurement is started As the cuff deflates decreasing numbers appear on the display The Heartbeat Symbol flashes at every heartbeat When the measurement is complete the arm cuff completely deflates NOTE Do not move your arm and remain still until the entire measurement process is completed 4 Check the progress of the consecutive measurements NOTE If a measurement fails the monitor will repeat taking a measurement up to five times during the consecutive measurement process The fi
4. pressure Self diagnosis and treatment using measured results may be dangerous Follow the instructions of your physician or licensed healthcare provider A DO NOT adjust medication based on measurement results from this blood pressure monitor Take medication as prescribed by your physician Only a physician is qualified to diagnose and treat High Blood Pressure A The monitor is not intended to be a diagnostic device A If battery fluid should get in your eyes immediately rinse with plenty of clean water Contact a physician immediately A Read all of the information in the instruction manual and any other literature in the box before operating the unit 5 SAFETY INFORMATION OPERATING THE DEVICE continued A This device is intended for use in measuring blood pressure and pulse rate in the adult population Do not use this device on infants or persons who cannot express their intentions A Read the Special Conditions section page 34 of the instruction manual if your systolic pressure is known to be more than 220 mmHg Inflating to a higher pressure than necessary may result in bruising where the cuff is applied A Operate the device only as intended Do not use the device for any other purpose A Dispose of the device components and optional accessories according to applicable local regulations Unlawful disposal may cause environmental pollution A Do not use a cellular phone near the device It may result in an o
5. B 2 Press the Memory button B The Average Symbol fui appears on the display when the average reading is shown DIA mmHg PULSE min issem 3 37 USING THE MEMORY FUNCTION 3 Press the Down button 7 to display the most recent set of measurement values on the screen The values are displayed from the most recent to the oldest NOTE The date and time are alternately wm s displayed with the measurement ane values Alternating display iT c 2 Press the Up or Down button to display the ty a sd next set of values H H al C J To the older readings BE ee C To the more recent readings NOTE Press and hold the Up or Down button to display the values faster TruRead Mode The average for the consecutive measurements appears on the display with the TruRead symbol To display the values for the individual measurements press the SET button while the average is displayed bY pulse Ib o CNOA START so j 4 Press the START STOP button to turn the power off 38 USING THE MEMORY FUNCTION MORNING AND EVENING AVERAGES The monitor calculates and displays a weekly average for measurements taken in the morning and evening B The monitor stores 8 weeks of Morning Averages and 8 weeks of Evening Averages for each user A and B NOTE The week begins Sunday at 4 00 AM MORNING AVERAGES Morning average
6. as set out in the interference causing equipment standard entitled Digital Apparatus ICES 003 of the Canadian Department of Communications Cet appareil num rique respecte les limites de bruits radioel ctriques applicables aux appareils num riques de Clase B prescrites dans la norme sur le materiel brouilleur Appareils Num riques ICES 003 dict e par le minister des communications Changes or modifications not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment 47 LIMITED WARRANTIES Your Omron BP785 IntelliSense Automatic Blood Pressure Monitor excluding the arm cuff is warranted to be free from defects in materials and workmanship appearing within 5 years from the date of purchase when used in accordance with the instructions provided with the monitor The arm cuff is warranted to be free from defects in materials and workmanship appearing within one year from the date of purchase when the monitor is used in accordance with the instructions provided with the monitor The above warranties extend only to the original retail purchaser We will at our option repair or replace without charge any monitor or arm cuff covered by the above warranties Repair or replacement is our only responsibility and your only remedy under the above warranties To obtain warranty service contact Customer Service by calling 1 800 634 4350 for the address of the repair loc
7. llle ne 28 Calibration Check System 0000000000000 28 Cuff Wrap Guide ire osa iA VERRE 28 Using the Guest Mode 0 00 02 eee eee eee 29 Selectin the USERID ise vhi ei YG Re a 30 Using the USERID 52 2 02 13D SR Me EO Ba eh ee 30 Using the Single Mode 4 vna sea eA VERE ao 31 Using the TruRead Mode 00 00 00 0c eee ee 33 Special Conditions 45 se sha ea eueERA eR Ra daa 35 Using the Memory Function supre 0 0 ee eens 36 Averaging Function uae ved ue Moles Gee LER CES 36 To Display the Measurement Values 0 00000 ee eae 37 Morning and Evening Averages 00 0 cece eee eee 39 Morning Averages duae heb PEAT kG OR ORO Sat 39 Evening Averages 2 2st vede eet eR amp LER 39 To Display Morning and Evening Averages 40 Display Combinations 0 cece eee eee eens 41 To Delete All Values Stored in the Memory 42 Care and Maintenance Care and Maintenance 2445 ove os Sie dk dies oe UO Mtoe WAR S 43 Error Indicators and Troubleshooting Tips 2 000 ee eee 45 BCC Statement oi ea sm Sates RAUS IT ek make teas Db SRI 47 Iamited Warranties Sea Saone ou EDO RN SR Ow a 48 Specifications c ua demus vider pe UI RF wt Sak Vg dtes so 49 INTRODUCTION Thank you for purchasing the Omron BP785 IntelliSense Automatic Blood Pressure Monitor with ComFit Cuff Fill in for future reference DATE PURCHASED SERIAL NUMBER
8. AD 4 SETTING THE DAY Press the Up button C gt to advance gone by increments of one day Press the SET button to set the current day The hour flashes on the display 5 SETTING THE HOUR The time is set using AM or PM Press the Up button C gt to advance by increments of one hour Press the SET button to set the current hour The minute flashes on the display 6 SETTING THE MINUTE Press the Up button gt to advance by increments of one minute Press the SET button to set the minute setting 7 TO TURN THE MONITOR OFF Press the START STOP button 23 APPLYING THE ARM CUFF A CAUTION Read all of the information in the instruction manual and any other literature in the box before operating the unit A CAUTION This device is intended for use in measuring blood pressure and pulse rate in the adult population Do not use this device on infants or persons who cannot express their intentions APPLYING THE CUFF ON THE LEFT ARM 1 Make sure the air plug is securely inserted in the main unit NN 24 APPLYING THE ARM CUFF 3 Sit on a chair with your feet flat on the floor Place your left arm on a table so the cuff is level with your heart 4 Hold the thumb grip on the cuff securely with your right hand Cloth Fastener 5 Turn the palm of your left hand upward v 25 APPLYING THE ARM CUFF 6 Apply the cuff to your l
9. Deflation Automatic pressure release valve Rapid Air Release Automatic exhaust valve Measurement Method Oscillometric method Power Source 120V 60Hz AC adapter or 4 AA batteries Battery Life Approx 500 uses when used 6 times a day with 4 new alkaline batteries Operating Temperature 50 F to 104 F 10 C to 40 C 15 to 90 RH Humidity Storage Temperature 4 F to 140 F 20 C to 60 C 10 to 95 RH Humidity Air Pressure 700 1060 hPa Main Unit Weight Approximately 15 1 8 oz 430 g not including batteries Main Unit Dimensions Approx 6 1 4 1 x 4 7 8 w x 3 5 16 h 158 mm x 124 mm x 86 mm Cuff Size Approximately 6 w 152 mm Cuff tube 23 5 8 1 600 mm Cuff Circumference Fits arm circumferences 9 to 17 220 mm to 420 mm Memory Up to 100 per user Contents Main Unit ComFit Cuff AC Adapter Instruction Manual Quick Start Guide Storage Case NOTE These specifications are subject to change without notice 49 Manufactured by OMRON HEALTHCARE Co Ltd Made in China Distributed by Omron Healthcare Inc 1200 Lakeside Drive Bannockburn IL 60015 www omronhealthcare com Copyright O 2010 Omron Healthcare Inc
10. OMRON N intelli YY sense 10 series Blood Pressure Monitor with ComFit Cuff Model BP785 ESPA OL ENGLISH TABLE OF CONTENTS Before Using the Monitor Introduction ico ate eR eek Ce RS OO a S 4 Safety Information ae aee Seo ERR RW RP AE Ger aote 5 Operating the Device uev ERU RP DSOPMERSqEdE 5 Risk of Blecttical Shock ness eR Sete exe 7 Care and Maintenance oi cessere eR eet baa eee 7 Before Taking a Measurement 0 0 0 0 cece ee 8 Operating Instructions Know Your Unit ceha e tidied dhe M RD RP LEM 9 Unt Display 5 22 95 pb 24 bah ng Breage eae oe ES 1 Display Symbol te oe er aad d dot dete edo ob ds Make Se AS 2 Irregular Heartbeat Symbol 00 00 00 000 00005 12 Movement Error Symbol 2 2 0 00 00 00 cece esses 2 USER ID Symbol 2 dod do edad eee bee dt eatei eke at 2 Morning Hypertension Symbol 2 000000 3 Heaitbeat Symbol Rees de ey baba s TRE DP UH PS 4 Average Value Symbol ssssuussrrerersrrurrrrrrrr e 4 Morning Average Symbol esleeeeeeess 4 Evening Average Symbol 0 0 0 0 0 eee eee ee 4 Cuff Wrap Guide Symbol 00 00 4 Using the AG Adapter oip bade et RU p teehee os eee Medd ds 5 Battery Installati n soe esses p ee dae hee RR be ea EAR 17 Setting the Date Time and TruRead 1 0 0 0 0 0 0 eee ee eee ee 9 Applying the Arm Cuff 2 0 0 eee eene 24 TABLE OF CONTENTS Taking a Measurement
11. ULAR HEARTBEAT SYMBOL 8 When the monitor detects an irregular rhythm two or more times during the measurement the Irregular Heartbeat Symbol W will appear on the display with the measurement values An irregular heartbeat rhythm is defined as Normal Heartbeat a rhythm that varies by less than 25 from Pulse A A AAAA the average rhythm or 25 more than the Blood fN A NL JN JN average rhythm detected while the monitor Pressure is measuring the systolic and diastolic blood Irregular Heartbeat Paes Short Long If the irregular heartbeat symbol Pulse displays with your measurement results we Blood fNJN PS fNUN recommend you consult your physician Pressure Follow the directions of your doctor MOVEMENT ERROR SYMBOL The Movement Error Symbol is displayed if you move your body during the measurement Please remove the arm cuff and wait 2 3 minutes Take another measurement remain still during inflation USER ID SYMBOL 4 8 The USER ID Symbol indicates USER A or USER B as selected by the user to take a measurement or when using the memory function The USER ID Symbol is not displayed when using the Guest Mode to take a measurement 12 DISPLAY SYMBOLS The American Heart Association recommends the following guideline for upper limit of normal for home blood pressure readings AHA Home Guideline for Upper Limit of Normal BP Systolic Blood Pressure 135 mmHg Diastolic Blood Pressure 85 mmHg T
12. ation and the return shipping and handling fee Enclose the Proof of Purchase Include a letter with your name address phone number and description of the specific problem Pack the product carefully to prevent damage in transit Because of possible loss in transit we recommend insuring the product with return receipt requested THE FOREGOING IS THE SOLE WARRANTY PROVIDED BY OMRON IN CONNECTION WITH THIS PRODUCT AND OMRON HEREBY DISCLAIMS ANY OTHER WARRANTIES EXPRESS OR IMPLIED INCLUDING IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE IMPLIED WARRANTIES AND OTHER TERMS THAT MAY BE IMPOSED BY LAW IF ANY ARE LIMITED IN DURATION TO THE PERIOD OF THE ABOVE EXPRESS WARRANTY OMRON SHALL NOT BE LIABLE FOR LOSS OF USE OR ANY OTHER SPECIAL INCIDENTAL CONSEQUENTAIL OR INDIRECT COSTS EXPENSES OR DAMAGES This warranty provides you with specific legal rights and you may have other rights that vary by jurisdiction Because of special local requirements some of the above limitations and exclusions may not apply to you FOR CUSTOMER SERVICE Visit our web site at www omronhealthcare com Call toll free 1 800 634 4350 48 SPECIFICATIONS Model BP785 HEM 7222 Z Display LCD Digital Display Measurement Range Pressure 0 to 299 mmHg Pulse 40 to 180 min Accuracy Calibration Pressure 3mmHg or 2 of reading Pulse 5 of reading Inflation Automatic by electric pump
13. ays use the same USER ID when taking a measurement The monitor stores the measurement values in the memory by the USER ID selected These measurement values are used to calculate the Morning Averages and Evening Averages Slide the USER ID Selection Switch right or left to select USER A or B USING THE USER ID When you select a USER ID the monitor can be set to take one measurement using the Single Mode or three consecutive measurements using the TruRead Mode when you press the START STOP button NOTE The default value is set to the Single Mode to take one measurement The TruRead Mode takes three consecutive measurements The monitor will inflate take a measurement and deflate three times separated by a short interval of time between each measurement 30 TAKING A MEASUREMENT USING THE SINGLE MODE 1 Select your USER ID A or B 2 Press the START STOP button All symbols appear on the display The USER ID Symbol you selected flashes on the display The cuff starts to inflate automatically As the cuff inflates the monitor automatically determines your ideal inflation level This monitor detects the pulse during inflation Do not move your arm and remain still until the entire measurement process is completed DIA ox mmHg PULSE min NOTE To stop the inflation or measurement press the START STOP button The monitor will stop inflating start deflating and will turn off
14. d Do not use the device for any other purpose CALIBRATION CHECK SYSTEM When you press the START STOP button the Calibration Check System light turns on and the unit starts monitoring your readings using dual sensors If the unit is accurate and functioning correctly the Calibration Check System light remains lit during the measurement If an error is detected the Calibration Check System light flashes and ER will appear on the display CUFF WRAP GUIDE This monitor checks whether the arm cuff is applied correctly during the inflation When the cuff is applied correctly 63 is displayed while taking a measurement or using the memory function If the cuff is not applied correctly is displayed If Q is displayed refer to the section Applying the Arm Cuff reapply the cuff and take another measurement 28 TAKING A MEASUREMENT USING THE GUEST MODE 1 Press and hold the START STOP button The A and B Symbols disappear from the display har n ise m EE A and B Symbols disappear 2 Release the START STOP button The cuff starts to inflate automatically NOTE To stop the inflation press the START STOP button The monitor will stop inflating start deflation and turn off 3 Inflation stops and the measurement is started When the measurement is completed your blood pressure and pulse rate appear on the display 29 TAKING A MEASUREMENT SELECTING THE USER ID Select your USER ID Alw
15. e new one Repeat measurement Remain still and do not talk during measurement Refer to Taking a Measurement Cuff over inflated If E2 appears repeatedly inflate the cuff manually until it is 30 to 40 mmHg above your previous measurement result Refer to Taking a Measurement The arm cuff was inflated above 299 Do not inflate the cuff above 299 mmHg Refer to immHg when inflating the cuff manually Taking a Measurement Repeat measurement Remain still and do not talk Movement during measurement during measurement Refer to Taking a Measurement Clothing is interfering with the Remove any clothing interfering with the arm cuff arm cuff Refer to Applying the Arm Cuff Device error Contact Customer Service Gone Sensor may be out of alignment Contact Customer Service for repair information vtr Cuff is not applied correctly Refer to Applying the Arm Cuff ERROR INDICATORS AND TROUBLESHOOTING TIPS ERROR INDICATORS SYMBOL CAUSE CORRECTION Replace the four batteries Batteries are worn Refer to Battery Installation TROUBLESHOOTING TIPS PROBLEM CAUSES AND SOLUTIONS No power Replace all four batteries with new ones No display appears on the unit Check the battery installation for proper placement of the battery polarities Blood pressure varies constantly Many factors including stress time of day and how you wrap the cuff may affect your blood pr
16. een on and oFF 20 SETTING THE DATE TIME AND TRUREAD 4 Press the SET button to confirm the change If on is selected the number of seconds between each measurement is displayed NOTE The default value between each measurement is 60 seconds 5 Press the Up or Down to change the interval of time between each measurement The interval can be set to 15 seconds 30 seconds 60 seconds or 120 seconds Continue to press the Up or Down button until the desired interval appears on the display 6 Press the SET button to confirm the setting DIA mmHg PULSE min ser sw The year flashes on the display 21 SETTING THE DATE TIME AND TRUREAD 2 SETTING THE YEAR The year can be set between 2010 and 2040 When the display reaches 2040 it will return to 2010 Press the Up button C gt to advance by increments of one year Press the SET button to set the current year The month flashes on the display NOTES e Press the Down button 7 to decrease the date and time values by decrements of one Press and hold the Up or Down button to increase or decrease the date and time values faster 3 SETTING THE MONTH Press the Up button gt to advance by increments of one month Press the SET button to set the current month GQ Intetti NY sense The day flashes on the display 22 SETTING THE DATE TIME AND TRURE
17. eft upper arm so the blue stripe is on the inside of your arm and aligned with your middle finger The air tube runs down the inside of your arm The bottom of the cuff should be approximately 1 2 above your elbow Blue Stripe 1 2 inch 1 2 cm 7 Wrap the cuff firmly in place around your arm using the cloth fastener 26 APPLYING THE ARM CUFF APPLYING THE CUFF ON THE RIGHT ARM When taking a measurement using the right arm use this instruction for Step 6 on page 26 Apply the cuff to your right upper arm so the thumb grip is centered on the inside of your inner arm The bottom of the cuff should be approximately 1 2 above your elbow Thumb Grip NOTE Be careful not to rest your arm on the air tube This will restrict the flow of air to the cuff 27 TAKING A MEASUREMENT The monitor is designed to take measurements and store the measurement values in the memory for two people using USER ID A and USER ID B The monitor can also be used to take a single measurement for other persons using the GUEST Mode The USER ID symbol is not displayed when using the GUEST Mode Measurements taken using the GUEST Mode are not stored in the memory A WARNING Contact your physician for specific information about your blood pressure Self diagnosis and treatment using measured results may be dangerous Follow the instructions of your physician or licensed healthcare provider A CAUTION Operate the device only as intende
18. en the cuff is applied correctly is displayed while taking a measurement or using the memory function If the cuff is not applied correctly O0 is displayed 14 USING THE AC ADAPTER IMPORTANT SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONS DANGER TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK CAREFULLY FOLLOW THESE INSTRUCTIONS A For connection to a power supply not in the U S A use an attachment plug adapter of the proper configuration for the power outlet A The power unit AC Adapter is intended to be correctly oriented in a vertical or floor mount position NOTES Use only the authorized Omron AC Adapter that came with this monitor We recommend you install the batteries even if the AC Adapter is used If no batteries are installed you may need to reset the date and time if the AC Adapter is disconnected The measurement results will not be deleted A CAUTION Use only Omron authorized parts and accessories Parts and accessories not approved for use with the device may damage the unit 15 USING THE AC ADAPTER TO CONNECT THE AC ADAPTER Insert the AC Adapter Plug into the AC Adapter Jack on the back side of the monitor as illustrated Q Plug the AC Adapter into a 120V AC outlet 60 cycles TO DISCONNECT THE AC ADAPTER Hold the Housing to remove the AC Adapter from the electrical outlet Remove the AC Adapter plug from the monitor A WARNING Do not plug or un
19. essure Review the sections Before Taking a Measurement and Taking a Measurement Measurement values appear too high or too low FCC STATEMENT NOTE POTENTIAL FOR RADIO TELEVISION INTERFERENCE for U S A only This product has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC rules These limits are designed to provide reasonable protection against harmful interference in a residential installation The product generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If the product does cause harmful interference to radio or television reception which can be determined by turning the product on and off the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna ncrease the separation between the product and the receiver Connect the product into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help POTENTIAL FOR RADIO TELEVISION INTERFERENCE for Canada only This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus
20. his is a general guideline because blood pressure depends on age and morbidity The AHA recommends a lower home blood pressure goal for certain patients including diabetic patients pregnant women and patients with renal failure The monitor is not intended to be a diagnostic device MORNING HYPERTENSION SYMBOL 3 The Morning Hypertension Symbol is displayed if the morning average reading for a week is above 135 for the Systolic Blood Pressure value and or 85 for the Diastolic Blood Pressure value when viewing the Morning Averages and the Evening Averages in the memory Omron Healthcare recommends you contact your physician if the MORNING HYPERTENSION SYMBOL and or the HEARTBEAT SYMBOL appear on the display with your measurement values American Heart Association Scientific Statement 2004 13 DISPLAY SYMBOLS HEARTBEAT SYMBOL 4 TAKING A MEASUREMENT The Heartbeat Symbol flashes on the display during the measurement The Heartbeat Symbol flashes at every heartbeat AVERAGE VALUE SYMBOL ii The Average Value Symbol is displayed when you press the memory button The most recent average reading appears on the display screen MORNING AVERAGE SYMBOL xx The Morning Average symbol is displayed when viewing Morning Averages using the Memory Function EVENING AVERAGE SYMBOL B The Evening Average symbol is displayed when viewing Evening Averages using the Memory Function CUFF WRAP GUIDE SYMBOL Wh
21. l as your heart 6 Remain still and do not talk during the measurement 7 Keep a record of your blood pressure and pulse readings for your physician A single measurement may not provide an accurate indication of your true blood pressure You need to take and record several readings over a period of time Try to measure your blood pressure at about the same time each day for consistency KNOW YOUR UNIT Main Unit Calibration Check System SET Button Morning Evening Average USER ID 3 amp 2 Button Selection Switch Memory E Button Up Down Start Stop Button C 3 C 2 Buttons Battery Compartment AC Adapter Jack 9 KNOW YOUR UNIT Components Air Tube Air Plug Connects to Air Jack Arm Cuff Storage Case Instruction Manual GETTING STARTED 10 Series Arm Blood Pressure Quick Start Guide 10 UNIT DISPLAY Morning Average Symbol Date Time Display Evening Average Symbol Irregular Heartbeat Symbol USER ID Symbol A or B Week Display Average Value Symbol TruRead Symbol 1 Memory Symbol Systolic Blood Pressure ne Diastolic Blood Pressure M d Heartbeat Symbol 4 34P x Low Battery Indicator Morning Hypertension Symbol Movement Symbol Blood Pressure Level Indicator gt Deflation Symbol Q Cuff Wrap Guide MN co LE Pulse Display Memory Number DISPLAY SYMBOLS IRREG
22. le local regulations Unlawful disposal may cause environmental pollution 18 SETTING THE DATE TIME AND TRUREAD Set the monitor to the current date and time before taking a measurement for the first time If the date and time are not set correctly the measurement values stored in the memory and the average values may not be correct If the date and time are not set appears during or after measurement The Blood Pressure Monitor automatically stores up to 100 individual measurement values with the dates and times The monitor also calculates weekly averages for measurements in the morning and in the evening Morning and Evening averages are stored for this week and the last seven weeks The monitor can also calculate an average reading based on the three most recent measurements taken within 10 minutes of the last reading NOTE e If only two readings are stored in the memory for the 10 minute period the average is based on the two readings If one reading is stored in the memory for the 10 minute period this reading is displayed as the average 19 SETTING THE DATE TIME AND TRUREAD 1 SETTING THE TRUREAD MODE 1 Select your USER ID A or B Ee 2 Press the SET button The TruRead symbol and the oFF setting appears on the display DIA ial mmHg PULSE min 3 Press the Up or Down button C L 2 to select on NOTE Press the Up or Down button to alternate betw
23. perational failure A Use only Omron authorized parts and accessories Parts and accessories not approved for use with the device may damage the unit A Use only 1 5V alkaline batteries with this device Do not use other types of batteries This may damage the unit SAFETY INFORMATION RISK OF ELECTRICAL SHOCK A Do not plug or unplug the power cord into the electrical outlet with wet hands A Do not overload power outlets Plug the device into the appropriate voltage outlet CARE AND MAINTENANCE A Do not subject the monitor to strong shocks such as dropping the unit on the floor A Do not submerge the device or any of the components in water A Store the device and the components in a clean safe location A Changes or modification not approved by Omron Healthcare will void the user warranty Do not disassemble or attempt to repair the unit or components BEFORE TAKING A MEASUREMENT To ensure a reliable reading follow these recommendations Avoid eating drinking alcohol smoking exercising and bathing for 30 minutes prior to taking a measurement Rest for at least 15 minutes prior to taking the measurement 2 Stress raises blood pressure Avoid taking measurements during stressful times 3 Measurements should be taken in a quiet place 4 Remove tight fitting clothing from your arm 5 Sit on a chair with your feet flat on the floor Rest your arm on a table so that the cuff is at the same leve
24. plug the power cord into the electrical outlet with wet hands A CAUTION Do not overload power outlets Plug the device into the appropriate voltage outlet 16 BATTERY INSTALLATION Battery Cover 1 Remove the battery cover with pulling the hook up while pushing it in the direction of the arrow 2 Install 4 AA size batteries so the positive and negative polarities match the polarities of the battery compartment as indicated 3 Replace the battery cover 17 BATTERY INSTALLATION BATTERY REPLACEMENT exi Low Battery Indicator When the Low Battery Indicator appears on the display screen turn the monitor off and remove all the batteries Replace with four new batteries at the same time Longlife alkaline batteries are recommended A CAUTION If battery fluid should get in your eyes immediately rinse with plenty of clean water Contact a physician immediately NOTES Turn the unit off before replacing the batteries If the batteries are removed while the unit is still on the date and time will be reset to that of the previous use However the measurement results are not deleted When the batteries are replaced you may need to reset the date and time If appears on the display refer to page 19 SETTING THE DATE TIME AND TRUREAD The supplied batteries may have a shorter life A CAUTION Dispose of the device components and optional accessories according to applicab
25. pter cord Do not forcefully bend the arm cuff or air tube Do not fold tightly Clean the monitor with a soft dry cloth Do not use any abrasive or volatile cleaners Do not attempt to clean the cuff A CAUTION Do not submerge the device or any of the components in water Do not subject the monitor to extreme hot or cold temperatures humidity or direct sunlight A CAUTION Store the device and the components in a clean safe location A CAUTION Do not subject the monitor to strong shocks such as dropping the unit on the floor Remove the batteries if the unit will not be used for three months or longer Always replace all the batteries with new ones at the same time 43 CARE AND MAINTENANCE Use the unit consistent with the instruction provided in this manual A CAUTION Changes or modification not approved by Omron Healthcare will void the user warranty Do not disassemble or attempt to repair the unit or components A CAUTION Use only Omron authorized parts and accessories Parts and accessories not approved for use with the device may damage the unit 44 ERROR INDICATORS AND TROUBLESHOOTING TIPS ERROR INDICATORS SYMBOL CAUSE CORRECTION Insert the plug securely Refer to Applying the Air plug disconnected Arm Cuff A A pply the arm cuff correctly Refer to Applying E Arm cuff not applied correctly the Arm Cuff Air is leaking from the arm cuff Replace the cuff with th
26. r inflates 30 to 40 mmHg higher than your expected systolic pressure NOTES Do not apply more pressure than necessary The monitor will not inflate above 299 mmHg When the measurement is complete the arm cuff completely deflates Your blood pressure and pulse rate are displayed 35 USING THE MEMORY FUNCTION The monitor is designed to store the blood pressure and the pulse rate in the memory for two people USER A and USER B every time a measurement is completed The monitor automatically stores up to 100 sets of measurement values blood pressure and pulse rate for each user A and B When 100 sets of measurement values are stored the oldest record is deleted to save the most recent values The monitor also stores 8 weeks of Morning Averages and 8 weeks of Evening Averages for each user A and B AVERAGING FUNCTION The monitor calculates the average reading based on the three most recent sets of measurement values taken within 10 minutes of the most recent reading NOTES If two sets of measurement values are stored in the memory for the 10 minutes period the average is based on the two sets of measurement values If one set of measurement values is stored this is displayed as the average When viewing the reading taken without setting the date and time is displayed instead of the date and time 36 USING THE MEMORY FUNCTION TO DISPLAY THE MEASUREMENT VALUES 1 Select your USER ID A or
27. rst measurement is complete waiting to start the next measurement The interval of time set between each measurement will appear on the display 1 wl 1 ot Li 9 TAKING A MEASUREMENT The second measurement is complete waiting to start the next measurement dim mimm mimm The consecutive measurements are complete The average for three measurements appears on the display Oesjenina 5 Press the SET button to display the blood pressure and pulse rate for the first measurement Press the SET button again to display the next measurement 6 Press the START STOP button to turn the monitor off A WARNING Contact your physician for specific information about your blood pressure Self diagnosis and treatment using measured results may be dangerous Follow the instructions of your physician or licensed healthcare provider A WARNING DO NOT adjust medication based on measurement results from this blood pressure monitor Take medication as prescribed by your physician Only a physician is qualified to diagnose and treat High Blood Pressure 34 TAKING A MEASUREMENT A WARNING The monitor is not intended to be a diagnostic device SPECIAL CONDITIONS A CAUTION Inflating to a higher pressure than necessary may result in bruising where the cuff is applied If your systolic pressure is known to be more than 220 mmHg press and hold the START STOP button until the monito
28. s are based on the first average reading using the TruRead Mode or the first reading using the Single Mode Measurement times must be between 4 00 AM and 9 59 AM EVENING AVERAGES Evening averages are based on the last average reading using the TruRead Mode or the last reading using the Single Mode Measurement times must be between 7 00 PM and 1 59 AM 39 USING THE MEMORY FUNCTION TO DISPLAY MORNING AND EVENING AVERAGES 1 Select your USER ID A or B 2 Press the Morning Evening Average button xx to select the Morning or Evening average The average for the current week THIS WEEK appears on the display 3 Press the Down 7 3 button to display the previous weeks With each press of the Down 7 button the values are displayed from 1 week ago to the older With each press of the Up gt button the values are displayed from 7 week ago to the recent NOTE If no measurement is taken in a given week the display will appear as illustrated 4 Press the START STOP button to turn the monitor off 40 USING THE MEMORY FUNCTION DISPLAY COMBINATIONS In addition to the Morning Average and Evening Average Symbols the monitor may also display the Morning Hypertension Symbol if the morning average for that week is above the AHA guidelines See page 13 for details Depending on your measurement results these may be displayed in the following combinations
Download Pdf Manuals
Related Search