Numark Industries TT-100 Turntable User Manual
Contents
1. Numark Professional Disc Jockey Products TT 100 DIRECT DRIVE TURNTABLE OWNER S MANUAL o 2000 Numark Industries http www numark com PRO TT 2 Turntable Safety Information AN CAUTION RISK OF ELECTRIC SHOCK AN DO NOT OPEN CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE ANY COVER NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL ONLY The lightning flash with arrowhead symbol within the equilateral triangle is intended to alert the user to the presence of un insulated dangerous voltage within the product s enclosure that may be of sufficient magnitude to constitute a risk of electric shock The exclamation point within the equilateral triangle is intended to alert the user to the presence of important operating and maintenance servicing instructions in the literature accompanvina this appliance CAUTION FOR USA amp CANADIAN MODELS ONLY TO PREVENT ELECTRIC SHOCK DO NOT USE THIS POLARIZED PLUG WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE SAFETY INSTRUCTIONS t Read Instructions All the safety and operating instructions should be read before this product is connected and used Retain Instructions The safety and operating instru2. 13 S N ratio gt 50dB DIN B Output Difference 2 3dB Channel Separation 16dB Pitch 675 1Hz with 33 1 3 rpm 1170 1Hz with 78 rpm TONEARM SECTION Type Static Balanced S shaped with detachable headshell Effective length 234mm Overhang 20mm Tracking Force 0 4g Anti Skate 0 7g Cartridge Weight 6 10g GENERAL Power supply AC110 127V 220 240V 50 60Hz Power consumption 15 Watts Dimension W x D x H 450 x 352 x 148 5 mm 17 3 4 x 13 3 4 x 5 7 8 Weight 10 3 Kgs 24 Ibs Specifications and design may be changed without notice for improvement Numark The Leader in DJ Technology 2000 Numark Industries 11 PRO TT 2 Turntable http www numark com Numark Professional Disc Jockey Products LIMITED PRODUCT WARRANTY What is covered and for how long 1 NUMARK INDUSTRIES LCC NUMARK warrants to the original purchaser that NUMARK S DJ mixers and amplifiers are free from defects in material and workmanship under normal use and service for the period commencing upon the date of purchase from an authorized NUMARK dealer and continuing for the following period of time after that date for 2 Years The warranty is extended to 3 Years with the completion of the warranty card provided that the warranty card is completed and returned within 30 days from the date of purchase All other NUMARK products are warranted for 1 Year including but not limited to CD players CD Mix Stations turntables pream
3. prevent fire or shock hazard do not expose the unit to rain or moisture Never place cans of beer soda glasses of water or anything wet on top of the turntable Numark The Leader in DJ Technology 2000 Numark Industries 42 http www numark com PRO TT 2 Turntable Numark TT 100 PROFESSIONAL DIRECT DRIVE TURNTABLE CONGRATULATIONS You are now the owner a Numark TT 100 Direct Drive Turntable This unit has been designed to deliver solid performance at a reasonable price With its full selection of adjustment features the Numark TT 100 offers essential control to the user Enjoy this turntable and remember BE CREATIVE Thank you for buying Numark DJ products FEATURES e 10 or20 pitch adjustment e S Shaped Tone arm assembly with e Direct Drive Motor e Counterweight e Start Stop Button e Height Adjustment e Electronic Braking e Skating Adjustment e 33 45 78 RPM speeds e Height Lock e Forward and Reverse Platter Direction e Lever lift with height adjustment e Pop up Stylus Target Light e Tone arm holder with locking mechanism e Adjustable Feet for Leveling e Output for e Easily removable smoked plastic lid e Audio Left Right amp Ground e Quartz Lock of 0 speed position e Platter Speed to be used with external e 45RPM adapter and holder process devices e Extra Stylus Holder e External START STOP control Numark The Leader in DJ Technology 2000 Numark Industries 4 http www numark com PRO
4. COMPLETE WARRANTY FOR NUMARK S MIXERS AND IS GIVEN IN LIEU OF ALL OTHER EXPRESS WARRANTIES THIS LIMITED WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE ORIGINAL PURCHASER OF THIS PRODUCT AND STATES PURCHASER S EXCLUSIVE REMEDY IF ANY PORTION OF THIS LIMITED WARRANTY IS ILLEGAL OR UNENFORCEABLE BY REASON OF ANY LAW SUCH PARTIAL ILLEGALITY OR UNENFORCEABILTY SHALL NOT AFFECT THE ENFORCEABILITY OF THE REMAINDER OF THIS LIMITED WARRANTY WHICH PURCHASER ACKNOWLEDGES IS AND WILL ALWAYS BE CONSTRUED TO BE LIMITED BY ITS TERMS OR AS LIMITED AS THE LAW PERMITS This Limited Warranty allocates risk of product failure between purchaser and NUMARK and NUMARK S product pricing reflects this allocation of risk and the limitations of liability contained in this Limited Warranty The agents employees distributors and dealers of NUMARK are not authorized to make modifications to this Limited Warranty or make additional warranties binding on NUMARK Accordingly additional statements such as dealer advertising or presentation whether oral or written do not constitute warranties by NUMARK and should not be relied upon How does state law apply to this warranty SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATIONS OF INCIDENTAL OR CONSEQUENTIAL DAMAGES OR HOW LONG AN IMPLIED WARRANTY LASTS SO THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO PURCHASER This Limited Warranty gives you specific legal rights You may also have other rights which vary from one juri
5. On Rotate Right Off Rotate Left START STOP Pressing once engages high torque motor pressing again engages brake Platter Revolution Speed Buttons 33rpm Press 33 45rpm Press 45 78rpm Press 33 and 45 Strobe Light Pulses a beam of light at the Strobe Dots The large dots will seem not to move when pitch is 0 Strobe Dots Four rows of dots that indicate various stages in pitch adjust 3 3 outer row 0 large dots 3 3 next row 6 inner row Platter Place this on the Center Spindle Center Spindle Keeps platter and records centered Place the supplied slipmat on the Center Spindle now 45 Adapter Place on Center Spindle for playing 7 records with large center holes 10 11 12 13 14 15 16 17 Do not discard any packing materials Forward Reverse Buttons Determine the direction the platter will spin Lid Hinge Holder Place the bottom tabs of your lid hinges in here after you finish assembly Extra Stylus Holder Place an extra headshell here Tone Arm Assembly Explained in tonearm section Pitch Adjust Use this to change the speed of the platter when quartz lock is inactive Pitch Percent Indication Shows the amount of pitch change possible Quartz Lock On will hold the revolution speed to 0 Off will allow use of the Pitch Adjust HOLD DOWN to alternate from 10 to 20 Pitch Target Light Press the button to the right and a light wil
6. TT 2 Turntable TABLE OF CONTENTS Safety Information Page 2 Introduction Page 4 Product Registration Page 5 Diagram and Parts Description Page 6 Operating Instructions Page 10 Specifications Page 11 Warranty and Service Page 12 Contents of this package Main Unit Turntable platter Turntable slip mat Dust cover Dust cover clips 45 rpm adapter Counterweight Headshell mm NO a Product Registration Please record the serial number of your unit as shown on the chassis under the platter as well as the name of the dealer from whom you purchased the unit Retain this information and your original purchase receipt for your records Please return the enclosed warranty card to register your unit with us MODEL PURCHASED FROM SERIAL NUMBER DATE OF PURCHASE Numark The Leader in DJ Technology 2000 Numark Industries 5 http www numark com PRO TT 2 Turntable DIAGRAM AND PARTS DESCRIPTION turntable of this type that you will need to read about to use properly parts Use the contents guide for reference 1 9 o To fully appreciate the features of the Numark TT 100 please read this entire manual before you begin operation The TT 100 should be placed on a level sturdy surface Keep in mind that there are a few features you may never have seen before on a Start by removing all parts from the package and place on a level surface Carefully check all packing material for hidden Power Dial
7. ctions should be kept for future reference Heed Warnings All warnings on this product and in these operating instructions should be followed Follow Instructions All operating and other instructions should be followed Water and Moisture This product should be kept away from direct contact with liquids Heat Avoid placing this product to close to any high heat sources such as radiators Ventilation The appliance should be situated so that it s location or position does not interfere with it s proper ventilation For example the appliance should not be situated on a bed sofa rug or similar surface that may block the ventilation opening j or placed in a built installation such as bookcase or cabinet that may impede the flow of air through the ventilation openings 10 11 12 13 14 15 Power Sources This product should be connected to a power supply only of the type described in these operating instructions or as marked on the unit Power Cord Protection Power supply cords should be routed so that they are not likely to be walked upon or pinched by items placed on or against them When removing the cord from a power outlet be sure to remove it by holding the plug attachment and not by pulling on the cord Object and Liquid Entry Take care that objects do not fall into and that liquids are not spilled into the inside of the mixer Cleaning The appliance should b
8. e cleaned only as recommended by the manufacturer Non use Periods The power cord of the appliance should be unplugged from the outlet when left unused for long periods of time Damage Requiring Service Only qualified personnel should service this product If you have any questions about service please contact Numark at the number s shown on the back cover of this manual Grounding or Polarization Precautions should be taken so that the grounding or polarization means built into the CD player is not defeated Internal External Voltage Selectors Internal or external voltage selector switches if any should only be reset and re equipped with a proper plug for alternative voltage by a qualified service technician Do not attempt to alter this yourself WARNING To reduce the risk of fire or electrical shock do not expose this appliance to rain or moisture Electrical equipment should NEVER be kept or stored in damp environments SERVICE INSTRUCTIONS Disconnect power cord before servicing Replace critical components only with factory parts or recommended equivalents For AC line powered units Before returning repaired unit to user use an ohmmeter to measure from both AC plug blades to all exposed metallic parts The resistance should be no more than 100 000ohms Numark The Leader in DJ Technology 2000 Numark Industries http www numark com IMPORTANT INFORMATION Please read
9. e defective products NUMARK may at NUMARK S sole discretion use rebuilt reconditioned or new parts or components when repairing any product or replace a product with a rebuilt reconditioned or new product Repaired mixers will be warranted for a period equal to the remainder of the original Limited Warranty on the original mixer or for 90 days whichever is longer All replaced parts components boards and equipment become the property of NUMARK If NUMARK determines that any mixer is not covered by this Limited Warranty purchaser must pay all parts shipping and labor charges for the repair or return of such mixer What are the limits on NUMARK S liabilities THE WARRANTIES GIVEN IN THIS LIMITED WARRANTY TOGETHER WITH ANY IMPLIED WARRANTIES COVERING NUMARK MIXERS INCLUDING WITHOUT LIMITATION ANY WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE LIMITED TO THE DURATION OF THIS LIMITED WARRANTY EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW NUMARK SHALL NOT BE LIABLE FOR ANY SPECIAL INCIDENTAL CONSEQUENTIAL INDIRECT OR SIMILAR DAMAGES LOSS OF PROFITS DAMAGES TO PURCHASER S PROPERTY OR INJURY TO PURCHASER OR OTHERS ARISING OUT OF THE USE MISUSE OR INABILITY TO USE ANY NUMARK MIXER BREACH OF WARRANTY OR NEGLIGENCE INCLUDING BUT NOT LIMITED TO NUMARK S OWN NEGLIGENCE EVEN IF NUMARK OR ITS AGENT HAS BEEN ADVISED OF SUCH DAMAGES OR FOR ANY CLAIM BROUGHT AGAINST PURCHASER BY ANY OTHER PARTY THIS LIMITED WARRANTY IS THE
10. e left the pitch is faster than the rated speed If the strobe dots appear stationary which means the platter is in normal turntable speed move the pitch control slider up or down to adjust the speed 12 To suspend play lift tone arm with cueing lever 13 When play is finished raise the cueing lever move the tonearm to the armrest and secure the tonearm with the arm clamp 14 Turn off the target light off by pushing the light back down 15 Press the Start Stop button to stop the platter rotating 16 Turn the power dial to turn off the power MAINTENANCE Routine maintenance should be performed by cleaning the stylus periodically with a soft brush to prevent the accumulation of dust When the sound becomes distorted or noisy check the stylus If it is worn out replace with a new one From time to time the dust cover and turntable cabinet should be wiped with a soft dry cloth Use of any volatile materials as alcohol thinner benzene etc may remove the paint or damage the luster and should not be used Numark The Leader in DJ Technology 2000 Numark Industries 10 http www numark com SPECIFICATIONS TURNTABLE SECTION Type 3 speed full manual Driving method Direct drive Motor 12 Pole 3 Phase Brushless DC Motor Turntable platter Aluminum diecast 330mm dia Turntable speed 33 1 3 45 and 78 rpm Pitch Variance 20 Starting Torque more than 1 0kgf cm Braking Electronic OUTPUT Wow and flutter lt 0
11. l pop up directed at the stylus position 115V Voltage Selector With unit unplugged set the desired voltage for your location using a screw driver 230V Numark The Leader in DJ Technology 2000 Numark Industries http www numark com TONE ARM ASSEMBLY 18 Headshell Install cartridge here When installing a cartridge refer to the installation instructions supplied by the manufacturer of that cartridge During installation attach the stylus protector to guard the stylus tip from damage Attach wires as follows White L Left channel Blue L Left channel Red R Right channel Green R Right channel 19 20 21 22 23 24 25 26 PRO TT 2 Turntable Headshell Locking Nut Attach headshell by inserting into the front end of the tonearm then turn the locking nut clockwise with the head shell firmly held horizontally S Shaped Tone Arm Tone Arm Clamp and Rest Use this rest for the tone arm and clamp it in position during transportation Tone Arm Lift This elevates the tone arm above the record surface Tone Arm Lift Adjust Screw Controls the amount of lift Tone Arm Lever Controls the up and down action of the Tone Arm Lift Anti Skate Control This applies inward force to the tonearm so it doesn t skip outward across the record due to the centrifugal force of the record spinning Cartridge manufacturers usually specify the proper setting of this Counte
12. le for slip cueing scratching or beat mixing music you will want to use a slipmat and not a rubber mat Do not force the platter to stop moving while the motor is engaged Quality slipmats should be used to hold records in position Forcing the motor to stop can damage the motor assembly Numark The Leader in DJ Technology 2000 Numark Industries 9 http www numark com PRO TT 2 Turntable GENERAL OPERATING INSTRUCTIONS 1 Turn the power dial to turn on and the speed indicator and the strobe illuminator will light up 2 Turn on and raise the target light for illuminating the stylus tip by pushing the target light button 3 Place a record on the turntable mat When playing a 45rpm record with a large center hole place the 45 rpm adapter on the center spindle 4 Set the rotation speed 33 45 78 to match the record 5 Release the arm clamp 6 Set the cueing lever to the up position 7 Press the Start Stop button and the turntable platter will start to rotate 8 Move the tonearm over the desired groove 9 Set the cueing lever to the down position the tonearm will descend slowly onto the record and play begins 10 Set the desired pitch adjust range by depressing the QUARTZ button until the desired pitch is reached Options are 10 or 20 11 Adjust the pitch to a desirable speed During play observe the strobe dots If the strobe dots appear to the right the pitch is slower than the rated speed If they flow to th
13. ot sure which cables to get PRO TT 2 Turntable GENERAL SYSTEM PRECAUTIONS Use appropriate cables throughout your system Quality shielded audio cables and terminated shielded video cables low capacitance preferred Speaker cables must be 14 gauge minimum 12 or 10 gauge is better Be sure plugs and jacks are tightly mated Loose connections can cause hum noise or intermittent that could easily damage your speakers Reliability will be enhanced through the use of banana connectors on the speaker wires Observe correct speaker wire polarity If in doubt consult your Numark dealer or a qualified technician Take care to connect only one cable at a time Pay attention to the color coded labeled Input and Output jacks ALWAYS remember TURN AMPS ON LAST AND OFF FIRST Begin with master faders or volume controls on minimum and the amplifier gain input control s down Wait 8 to 10 seconds before turning up the volume This prevents transients which may cause severe speaker damage Use restraint when operating controls Try to move them slowly Rapid adjustments could damage speakers due to amplifier clipping Avoid amplifier clipping at all costs this occurs when the red LEDs usually on the front panel of most professional power amplifiers start flashing Clipping is when the power amplifier is distorting and working beyond it s limits Amplifier distortion is THE major cause of speaker failure To
14. plifiers beatkeepers equalizers microphones headphones cartridges and all other accessories What is not covered This Limited Warranty is conditioned upon proper use of the product by the purchaser 2 This Limited Warranty does not cover a defects or damage resulting from accident misuse abuse neglect unusual physical or electrical stress modification of any part of the product or cosmetic damage b equipment that has the serial number removed or made illegible c all plastic surfaces and other externally exposed parts that are scratched or damaged due to normal use d defects or damage from improper testing operation maintenance installation adjustment or service of the mixers e crossfaders What are NUMARK S obligations During the applicable warranty period NUMARK will repair or replace at NUMARK S sole discretion without charge to the purchaser any defective component part of the mixer To obtain service under this Limited Warranty purchaser must first contact NUMARK and obtain a return authorization number RA Purchaser must then return the mixer to NUMARK in an adequate container for shipping accompanied by purchaser s sales receipt or comparable proof of sale showing the date of purchase the serial number of the product and the seller s name and address To obtain an RA and assistance on where to return the mixer contact NUMARK customer service at 401 295 9000 Upon receipt NUMARK will repair or replace th
15. rweight Adjustment creates the proper downward pressure of the stylus to the record Attach now by sliding the counterweight onto the rear of the tonearm Twist it lightly and it will screw onto the rear shaft of the tonearm AW Numark The Leader in DJ Technology 2000 Numark Industries http www numark com PRO TT 2 Turntable TONE ARM SETTINGS The following explains proper counterweight and anti skating set up Cartridge manufacturers usually specify the proper settings a Remove the stylus protector do not touch the stylus tip during the adjustment b Set the cueing lever to the lower position so it does not effect tone arm height c Set Anti skate adjustment to 0 d Place counterweight on the rear of the tone arm e Release the arm clamp and lift the tonearm from the arm rest so it moves freely f Rotate the counterweight until the tonearm is approximately balanced horizontally floats freely ce hi g Refasten the tonearm with the arm clamp h Hold the counterweight stationary with one hand and rotate only the stylus pressure ring to bring the number O of the ring into alignment with the center line on the tonearm rear shaft i Rotate the counterweight with scale ring clockwise to the correct stylus pressure following the manufacturer s recommendation Note Failure to follow recommended stylus pressure could damage both the stylus and record This can al
16. sdiction to another RETURN INFORMATION 1 A Return Authorization number must be obtained from Numark through the address or phone numbers below 2 A copy of the original sales receipt must also be included for the equipment to be repaired under warranty 3 The faulty equipment must be packed in its original packaging 4 One additional outer layer of packaging must be included to ensure product safety Failures to do so may inadequately protect the equipment in transit and therefore jeopardize the customer s warranty 5 Numark will not accept COD shipments and no call tags will be issued for merchandise return 6 Numark will not return repaired merchandise to customers by priority service unless by written request at the customer s cost Requests must be submitted in writing with merchandise returned 7 The defective Numark equipment should be sent FREIGHT PREPAID with Return Authorization number clearly printed on the outer packaging and original sales receipt enclosed to Numark INDUSTRIES Attention Service Department Phone 1 401 295 9000 11 Helmsman Avenue Fax 1 401 295 5200 North Kingstown RI 02852 USA Web www numark com
17. so seriously degrade performance j Set the anti skating control knob to the same value as the stylus pressure unless lt your manufacturer specifies otherwise Numark The Leader in DJ Technology 2000 Numark Industries 8 http www numark com PRO TT 2 Turntable REAR PANEL DIAGRAM 27 28 29 30 31 32 33 34 Removable Lid Protects the turntable from dirt and dust Hinge Assembly Holds the lid and turntable together Attach now by sliding the bottom tabs of the Hinge Assembly into the Hinge Holders Platter Speed Output This output is to be used with external devices that require platter speed information Remote Start Stop This is used with external control devices Tech note This circuit is normally open Use a momentary switch and a 1 4 mono plug to change play states of the unit Adjustable Feet Turn feet to level the platter surface Phono Output Plug these into your mixer or preamplifiers turntable input Ground Cable Attach to the ground screw on your mixer or preamplifier to prevent turntable hum Power Cord Plug this into an appropriate power outlet after checking your power setting switch 18 under the platter Note Please refer to CAUTION on page 2 concerning proper use of power Your assembly should now be complete Place your turntable on a vibration free level surface and attach to your mixer or preamplifier If you are using the turntab
18. this entire manual before connecting the unit to your system For optimum performance 1 Always make sure that AC power is OFF while making any connections Do not force the platter to stop moving while the motor is engaged Quality slipmats should be used to hold records in position Forcing the motor to stop can damage the motor assembly Never use spray cleaners or oils on the slide control Residues cause excessive dirt build up and this will void your warranty In normal use slide controls can last for many years If they malfunction usually because of a dirty or dusty environment Never attempt to make any adjustments or repairs other than those described in this manual Take the TT 100 to your dealer or to an authorized Numark Service Center Do not place the unit in a location where it will be exposed to direct sun light or near a heating appliance Do not place the unit in a location where there is high humidity or a lot of dust Cartridge may pick up slight sound pressure or vibrations of the speakers coming along the floor or through the air resulting in howling Find a location which is very stable and free of vibration The legs have functions for adjusting the height of the unit itself Adjust the legs to stabilize the main body horizontally A NOTE ON CABLES Quality cable makes a big difference in audio fidelity and punch See your Numark dealer or an electronics or audio specialist store if you are n
Download Pdf Manuals
Related Search