Nokia BH-904 Bluetooth Headset User Manual
Contents
1. audio quality when you talk at a lower volume or in a noisy environment You can use the boom to answer or end a call To use the boom gently pull it down toward your mouth 14 or push it up to its initial position 15 Adjust volume The headset automatically adjusts the volume according to ambient noise To manually adjust the volume slide the volume key up or down To adjust the volume guickly slide and hold the key The selected volume level is saved for the device that you currently use with the headset Calls To make a call use your mobile device in the normal way when the headset is connected to it To redial the number you last called if your mobile device supports this feature with the headset when no ENGLISH call is in progress press the answer end key twice To activate voice dialling if your mobile device supports this feature with the headset when no call is in progress press and hold the answer end key for about 2 seconds Proceed as described in the user guide of the mobile device To answer a call pull the boom completely down toward your mouth or press the answer end key For noise cancellation the boom has to be completely pulled down To reject a call press the answer end key twice To end a call push the boom up to its initial position or press the answer end key To mute the microphone slide the mute key toward your mouth To unmute the microphone slide2. Nokia Bluetooth Headset BH 904 DECLARATION OF CONFORMITY Hereby NOKIA CORPORATION declares that this HS 101W product is in compliance with the essential reguirements and other relevant provisions of Directive 1999 5 EC A copy of the Declaration of Conformity can be found at http www nokia com phones declaration_of_conformity CE 0984 2009 Nokia All rights reserved Nokia Nokia Connecting People and the Nokia Original Accessories logo are trademarks or registered trademarks of Nokia Corporation Nokia tune is a sound mark of Nokia Corporation Other product and company names mentioned herein may be trademarks or tradenames of their respective owners Reproduction transfer distribution or storage of part or all of the contents in this document in any form without the prior written permission of Nokia is prohibited Nokia operates a policy of continuous development Nokia reserves the right to make changes and improvements to any of ENGLISH the products described in this document without prior notice Bluetooth is a registered trademark of Bluetooth SIG Inc To the maximum extent permitted by applicable law under no circumstances shall Nokia or any of its licensors be responsible for any loss of data or income or any special incidental consequential or indirect damages howsoever caused The contents of this document are provided as is Except as required by applicable law no warranties of any k
3. ed connect the headset to a charger and press the power key and the answer end key at the same time Troubleshooting If you cannot connect the headset to your compatible device check that ENGLISH the headset is charged switched on and paired with the device Battery and charger information This device has an internal nonremovable rechargeable battery Do not attempt to remove the battery from the device as you may damage the device This device is intended for use when supplied with power from the following chargers AC 6 and DC 6 The exact charger model number may vary depending on the type of plug The plug variant is identified by one of the following E EB X AR U A C K or UB The battery can be charged and discharged hundreds of times but it will eventually wear out Recharge your battery only with Nokia approved chargers designated for this device If a battery is being used for the first time or if the battery has not been used for a prolonged period it may be necessary to connect the charger then disconnect and reconnect it to begin charging the battery If the battery is completely discharged it may take several minutes before the charging indicator light is displayed Unplug the charger from the electrical plug and the device when not in use Do not leave a fully charged battery connected to a charger since overcharging may shorten its lifetime If left unused a fully charged battery w
4. f sight but they should be within 10 metres 33 feet of each other Connections may be subject to interference from obstructions such as walls or other electronic devices The headset is compliant with the Bluetooth Specification 2 1 EDR supporting the Headset Profile 1 1 and Hands Free Profile 1 5 Check with the manufacturers of other devices to determine their compatibility with this device ENGLISH Get started The headset contains the following Warning Use only chargers parts shown on the title page volume A approved by Nokia for use key 1 sliding boom 2 earpiece 3 with this particular model indicator light 4 power key 5 The use of any other types may invalidate charger connector 6 mute key 7 any approval or warranty and may be answer end key 8 and microphones dangerous Use of unapproved chargers 9 may present a risk of fire explosion or E other hazard Before using the headset you must charge the battery and pair the headset with a compatible device Parts of the device are magnetic Metallic materials may be attracted to the device Do not place credit cards or other magnetic storage media near the device 2 Lift the cover of the charger When you disconnect the power cord of any accessory grasp and pull the plug not the cord 1 Connect the charger to a wall outlet because information stored on them may connector and connect the be erased charger cable to it 10 The
5. for about 2 seconds The headset beeps and the green indicator light is displayed The headset tries to connect to one or two last connected devices When the headset is connected to a device and is ready for use the blue indicator light flashes slowly If the headset has not been paired with a device it automatically enters pairing mode To switch off press and hold the power key for about 2 seconds The headset beeps and the red indicator light is briefly displayed If the headset is not connected to a device within 30 minutes it switches off automatically Pair and connect the headset Before using the headset you must pair and connect it to a compatible device You can pair the headset with up to eight devices but you can connect it to only up to two devices at a time 1 Ensure that your mobile device is switched on and the headset is off 2 If the headset has not been previously paired with a device switch on the headset The headset enters pairing mode and the blue indicator light starts to flash quickly ENGLISH If the headset has been previously paired with a device ensure that the headset is switched off and press and hold the power key for about 5 seconds until the blue indicator light starts to flash quickly 3 Activate the Bluetooth feature on your device and set it to search for Bluetooth devices For details see the user guide of your device 4 Select the headset found devices ro
6. ill lose its charge over time Always try to keep the battery between 15 C and 25 C 59 F and 77 F Extreme temperatures reduce the capacity and lifetime of the battery A device with a hot or cold battery may not work temporarily Battery performance is particularly limited in temperatures well below freezing Do not dispose of batteries in a fire as they may explode Dispose of batteries according to local regulations Please recycle when possible Do not dispose as household waste ENGLISH Never use any charger that is damaged Operating times are estimates only Actual performance depends on many factors such as device settings selected device features being used or running in the background battery condition and ambient temperature Taking care of your device Your device is a product of superior design and craftsmanship and should be treated with care The following suggestions will help you protect your warranty coverage Keep the device dry Precipitation humidity and all types of liquids or moisture can contain minerals that will corrode electronic circuits If your device does get wet allow it to dry completely Do not use or store the device in dusty dirty areas Its moving parts and electronic components can be damaged Do not store the device in high or cold temperature High temperatures can shorten the life of electronic devices damage batteries and warp or melt cer
7. ind either express or implied including but not limited to the implied warranties of merchantability and fitness for a particular purpose are made in relation to the accuracy reliability or contents of this document Nokia reserves the right to revise this document or withdraw it at any time without prior notice The availability of particular products may vary by region Please check with your Nokia dealer for details This device may contain commodities technology or software subject to export laws and regulations from the US and other countries Diversion contrary to law is prohibited Introduction ENGLISH With the Nokia Bluetooth Headset BH 904 you can make and answer calls hands free with your compatible mobile device The headset is provided with a sliding boom that allows you to talk at a lower volume or in a noisy environment Noise cancellation helps you handle calls in noisy environments Read this user guide carefully before using the headset Also read the user guide for the device that you connect to the headset This product may contain small parts Keep them out of the reach of small children Note The surface of this device does not contain nickel in the platings The surface of this device contains stainless steel Bluetooth wireless technology Bluetooth wireless technology allows You to connect compatible devices without cables The headset and the other device do not need to be in line o
8. m the list of 5 If necessary enter the passcode 0000 to pair and connect the headset to your device In some devices you may need to make the connection separately after pairing When the headset is connected to at least one device and is ready for use the blue indicator light flashes slowly To manually connect the headset to one or two last used devices press and hold the answer end key for about 2 seconds when no devices are connected or make the connection in the Bluetooth menu of the desired device If you have a device connected to the headset and want to connect a Basic use ENGLISH second device make the connection in the Bluetooth menu of the device You may be able to set your device so that the headset connects to it automatically To activate this feature in a Nokia device change the paired device settings in the Bluetooth menu Change the earplug The headset may be provided with different sized earplugs Select the earplug that fits the best and is the most comfortable for your ear To change the earplug pull the current earplug from the earpiece 11 and push the new earplug into place 12 Place the headset on the ear Place the headset over your ear in a comfortable position and slide it downwards 13 Gently push the earpiece into your ear Point the headset toward your mouth Sliding boom The sliding boom brings the microphone closer to your mouth which improves the
9. nment R
10. red indicator light is displayed during Charge the battery Before charging the battery carefully Charging the battery fully may take read Battery and charger up 35 minutes with the AC 6 information charger Charging the battery with charging the AC 6 charger for 15 minutes provides up to 5 hours of talk time 3 When the battery is fully charged the green indicator light is displayed Disconnect the charger from the headset then from the wall outlet Push the cover over the charger connector To charge the headset with a compatible Nokia charger that has a 2 0 or 3 5 mm charger plug use the Nokia Charger Adapter CA 146C sold separately To charge the battery through the USB port of a compatible PC connect one end of the Nokia Connectivity Cable CA 101 sold separately to the charger connector and the other end to the USB port The fully charged battery has power for up to 8 hours of talk time or up to 160 hours of standby time ENGLISH To check the battery charge when the headset is not connected to a charger press the power key when the headset is switched on If the indicator light is green the charge level is sufficient If the light is yellow you may need to recharge the battery soon If the light is red recharge the battery When the battery charge is low the headset beeps every 5 minutes and the red indicator light flashes Switch on or off To switch on press and hold the power key
11. tain plastics When the device warms to its normal temperature from a cold temperature moisture can form inside the device and damage electronic circuit boards Do not attempt to open the device Do not drop knock or shake the device Rough handling can break internal circuit boards and fine mechanics Do not use harsh chemicals cleaning solvents or strong detergents to clean the device Only use a soft clean dry cloth to clean the surface of he device Do not paint the device Paint can clog the moving parts and prevent proper operation These suggestions apply equally to your device charger or any accessory Recycle Always return your used electronic products batteries and packaging materials to dedicated collection points This way you help prevent uncontrolled waste disposal and promote the recycling of materials Check product environmental information and how to recycle your Nokia products at www nokia com werecycle or nokia mobi werecycle ENGLISH The crossed out wheeled bin symbol on your product battery literature or packaging reminds you that all electrical and electronic products batteries and accumulators must be taken to separate collection at the end of their working life This requirement applies in the European Union Do not dispose of these products as unsorted municipal waste For more environmental information see the product Eco Declarations at www nokia com enviro
12. the mute key to the opposite direction When you mute or unmute the microphone the headset beeps twice To switch a call between the headset anda compatible connected device press and hold the answer end key for about 2 seconds Allow connection to two devices You can have the headset connected to two devices at the same time By default the headset can only be connected to one device at a time To allow the headset to connect to two devices switch off the headset and press and hold the power key and slide and hold the volume key up for about 5 seconds The blue indicator light flashes twice To allow the headset to connect to only one device switch off the headset and press and hold the power key and slide and hold the volume key ENGLISH down for about 5 seconds The green indicator light flashes twice If the headset can connect to two devices at the same time and you use redialling or voice dialling the call is made on the device that you last used to make a call when the headset was connected to it Clear settings or reset To clear all the pairing settings from the headset switch off the headset and press and hold the power key and the answer end key at the same time for about 5 seconds The headset beeps twice and the red and green indicator lights alternate After the settings are cleared the headset enters pairing mode To reset the headset if it stops functioning even though it is charg
Download Pdf Manuals
Related Search