Night Guard Home Surveillance System C3-RS-665
Contents
1. Tachometer checking type only The pre programmed run time 5 10 20 30 minutes has elapsed Transmitter button is pressed The vehicle refused to start running after 3 unsuccessful attempts DISABLING THE REMOTE START SYSTEM If installed This feature allows your system s remote start unit to be temporarily disabled to prevent the vehicle from being remote started accidentally This feature is useful if the vehicle is being serviced or stored in an enclosed area To disable the remote start move the optional remote start enable toggle switch to the OFF position NO of LIMITED LIFETIME WARRANTY PROVISIONS U S Continental U S and Canada Only Auto Page Inc WARRANTS that this new unit has been thoroughly inspected and tested at the factory prior to delivery Your Auto Page equipment is guaranteed for life to the original purchaser user of the equipment and the original vehicle in which it was installed by an authorized installer under the following conditions If the product proves defective according to Auto Page s testing within the first year the defective unit may be exchanged or repaired free of charge Proof of Purchase dated sales receipt must accompany all warranty returns otherwise your return will be rejected and sent back After one 1 year the purchaser should ship the unit prepaid to Auto Page with a money ader in the amount of 30 00 to cover shipping and handling charges2. C3 RS 665 2W PROFESSIONAL TWO WAY REMOTE CAR STARTER amp 3 CHANNEL SECURITY SYSTEM OPERATIONS MANUAL c3 Compatible Please register your product at www autopageusa com THIS PRODUCT IS DESIGNED FOR PROFESIONAL INSTALLATION ONLY SYSTEM OPERATIONS WARNINGS As with any product that performs automatic functions there are certain safety precautions that you must practice and be aware of Keep the transmitter out of children s reach Do not leave anyone in the vehicle while running on remote control Alert servicing personnel that the vehicle can be started automatically Do not start the vehicle by remote while it s in an enclosed area or garage Always apply the parking brake and lock the vehicle as you exit the vehicle The vehicle windows must be rolled up Should the unit malfunction disconnect the fuse until the problem is corrected 8 The use and operations of this system is the sole responsibility of the operator 9 Some areas may have local ordinances that prohibit leaving a vehicle running on public streets 10 It is not safe to remote start the vehicle if the vehicle is parked on a steep incline Tiansmiter System Function Remark Button Press and Hold for 3 seconds Panic function ey f Press o to stop panic NOOR WD Arm and Delete The 2 Stage Shock Presstwice within Seconds Sensor Silent Arming Disarming Ignition in off position Two Steps Door Un
3. Note The product needs to be registered online at time of installation www autopageusa com Exclusion to the Limited Lifetime Warranty Provision All two way LCD and two way OLED remote transceivers are excluded from the Limited Lifetime Warranty noted in paragraph no l All two way LCD and two way OLED remote transceivers are guaranteed to the original purchaser for a period of one year from date of purchase If the product proves to be defective within the first year the defective unit may be exchanged or repaired free of charge All other provisions stated on this card apply This WARRANTY will be considered void if the equipment has been misused neglected improperly serviced or installed altered dropped or damaged by water contrary to the Auto Page OPERATIONS MANUAL Or if used with accessories not approved by Auto Page which may have contributed to the defect See note below regarding product installation The purchaser s remedies under this WARRANTY shall be limited to the repair or replacement of electronic components only THE FOLLOWING IS NOT COVERED Damages or deterioration to cases batteries covers and cabinets the cost of repairs replacement and labor of which shall be borne by the purchaser even if occurring during the WARRANTY period Any equipment or parts which are claimed to be defective under this WARRANTY must be sent to the Auto Page Service center with proof of purchase at the purchaser s expense p
4. any warranty service Please go to the customer service tab and select product registration It is the purchaser s responsibility to register this product for any future warranty service Warning Some batteries may contain Perchlorate What is Perchlorate Perchlorate is both a naturally occurring and manmade contaminant increasingly found in groundwater surface water and soil Most perchlorate manufactured in the U S is used as an ingredient in solid fuel for rockets and missiles In addition perchlorate based chemicals are also used in the construction of highway safety flares fireworks pyrotechnics explosives common batteries and automobile restraint systems Perchlorate contamination has been reported in at least 20 states Perchlorate greatly impacts human health by interfering with iodide uptake into the thyroid gland In adults the thyroid gland helps regulate the metabolism by releasing hormones while in children the thyroid helps in proper development Perchlorate is becoming a 18 serious threat to human health and water resources Perchlorate Material Special handling may apply For more information go to http www dtsc ca gov hazardouswaste perchlorate 19 AUTOPAGE 960 Knox Street Unit B Torrance CA 90502 Tel 310 323 1800 or 800 262 2527 www autopageusa com 20
5. OUR XT 33 TRANSMITTERS XT 33 This transmitter uses two 2 3 volt lithium ion batteries CR2016 that are sandwiched together with the side facing upward To replace the battery you will need to use a small flat blade screwdriver Locate the small notch on the lower right side of the transmitter case next to the key ring Using the flat blade screwdriver carefully pry the top case from the bottom case It should snap apart after breaking the seal Before removing the batteries note the direction of the positive terminal Place the new batteries in exactly the same manner being careful not to bend or damage the contact terminal Snap the cases back together and then test the transmitter to insure it arms and disarms the alarm 2 CR2016 3 Volt Batteries ACTIVE LOCK amp ARM 1 Press f button on the transmitter 2 The siren will chirp once and parking lights will flash once indicating that the system is now armed The vehicle doors will lock upon arming when interfaced with the keyless entry system 9 SILENT ARMING DISARMING Pressing the a buttons together on the transmitter will arm or disarm your system No chirp sound will be heard arm disarm confirmation will be through the vehicles parking lights only DEFECTIVE SENSOR REMINDER If the siren sounds 3 chirps then you have left a door trunk or hood lid ajar SHOCK SENSOR OPTIONAL SENSOR BY PASS Press the f button once The siren chirps once T
6. ash Locking Disable 2 or 4 Chirps 2 or 3 Flashes ae Unlocking fo T a 3 Trigger Slow Flash Disable Flashes _ 4 Panic Alarming Flashes f Flashes AUTOMATIC RE ARM If this feature is selected the security system will automatically re arm itself 60 seconds after disarming with remote transmitter Automatic rearm will cancel if any door is opened before the 60 seconds timer has elapsed Please refer to your installing dealer to activate this feature DEACTIVATING WITHOUT A TRANSMITTER The Override function may be used if the remote transmitter is lost or inoperative 1 Enter the vehicle and turn the ignition switch to ON position 2 Within 10 seconds push and release the valet switch If starter disable is installed You can now start and operate the vehicle normally VALET MODE The valet switch allows you to temporarily bypass all system function eliminating the need to hand your transmitter to parking attendants or garage mechanics When the system is in valet mode and remote start functions are bypassed however the remote panic feature and remote door locks will emain operational To use the valet mode the system must first be deactivated either by using you remote transmitter or by operating the Manual override sequence Enter Valet Mode 1 From the Unlock condition turn the ignition to ON position 2 Push and hold valet switch for 2 seconds until the LED turns on The LED will remai
7. e brake pedal is pressed 3 Move the optional remote start enable toggle switch to OFF position If installed 4 The gear selector is in any gear other then PARK or NEUTRAL TO TURN OFF THE REMOTE START When the engine is running by remote start if you want to stop it 1 Press button once on the transmitter 3 Press the brake pedal The vehicle will shut down and turn off the parking light to indicate engine stopped TO OVERRIDE VEHICLE FROM REMOTE START CONTROL To operate the vehicle while running from the remote start 1 Insert the ignition key and turn it to ON not the start position 2 Press the brake pedal Note If the brake pedal is pressed before the key is in the ON position the engine will shut down TEMPORARY STOP FEATURE This feature allows the vehicle to remain running after the key has been removed from the ignition This feature is useful for occasions when you wish to exit and lock the vehicle for short periods of time but would like to leave the engine running and the climate control on 1 Before turning off the engine press the button once on the transmitter The parking lights will come on and the LED will flash 3 times to confirm Temporary Stop feature ON 2 Turn the ignition key to OFF position The engine will stay running 3 The engine will run until the pre programmed time elapsed or shutdown input is received TIMER START This unit can be programmed t
8. er 2nd Car Operation While the II icon display on the LCD screen you can remote control and communicate with a second Autopage AM frequency security system It has two short beep sounds while pressing any button of the LCD screen transceiver 1 Press and hold all four remote control buttons simultaneously unit one long beep is heard LCD Programming has now been entered B a 2 Within 5 seconds press and hold button until two beeping sounds are heard and the I icon will display on the LCD screen to indicate the second transceiver pin code has been initiated 3 To exit programming mode take no action for five seconds The remote control will generate two long beeps to indicate programming mode has been exited Back to first Car Operation This will allow you to control and communicate with the first vehicles security system 1 Press and hold all four remote control buttons W a simultaneously unit one long beep is heard Wg Programming has now been entered HI l 2 Within 5 seconds press and hold button until one beep sound is heard 3 To exit programming mode take no action for five seconds The remote control will generate two long beeps to indicate programming mode has been exited Vibration Melody Mode Vibration mode is useful when you are in a noisy place and it is difficult to hear the beep sound from the remote control In this mode the unit will vibrate if your security system is trigg
9. ered 1 Press and hold all four remote control buttons go simultaneously until one long beep is heard b Programming has now been entered Be 2 Within 5 seconds press the button to select the mode of vibration or melody the icon will displayed on the LCD screen to show the LCD remote transceiver is in vibration mode 3 To exit programming mode take no action for five seconds The remote control will generate two long beeps to indicate programming mode has been 6 exited Power Save Mode While in the power save mode the LCD remote transceiver will sleep until a button is pushed This will extend the life of battery When power save mode is ON the remote control will wake up periodically to check for messages from the security module 1 Press and hold all four remote control buttons simultaneously unit one long beep is heard _ Programming has now been entered Arra 2 Within 5 seconds press the button to toggle y On or Off The remote will beep once for On Bl twice for Off When power save mode is On the SAVE icon on the LCD screens to indicate entry the power save mode 3 To exit programming mode take no action for five seconds The remote control will generate two long beeps to indicate programming mode has been exited Screen Lamp ON Press the button once and the LCD screen lamp will turn on for 5 seconds Clear the Flash Icon and Mel
10. he system is armed Press he f button a second time within 5 seconds The siren chirps twice the Shock Sensor is now bypassed The sensor bypass feature is programmed to activate for one arming cycle only The security system will return to normal operation during the next arming cycle B PASSIVE ARMING Active arming disarming is controlling your security system via the remote transmitter This security system is equipped with an optional Passive Arming feature which allows the security system to arm 30 seconds after the last door is closed Operation is as follows 1 Turn the ignition to the OFF position and exit the vehicle 2 After all entrances are closed the security system LED will flash fast for 30 seconds If you re open any door hood trunk the security system LED will stop flashing It will begin flashing again once the vehicle all entrances are closed After 30 second timer has elapsed the security system will automatically ARM The siren will chirp 1 time and the parking lights will flash 1 time PASSIVE ARMING WITH PASSIVE DOOR LOCKING The vehicle doors will automatically lock after passive arming cycle has been completed Please refer to your installing dealer to activate this feature PASSIVE ARMING BY PASS While the LED is fast flashing for passive arming or Automatic re arm Press the B buttons twice the security will respond with 1 chirp and LED will turn ON The security system
11. lock amp Risa Press twice within 3 seconds System Trunk Release Channel 2 Press and Hold for 2 seconds Ra Rf Passive Arming By pass While the system Disarmed Activate or Turn Off The Remote Safety start requires two pushes Start a fe Channel 3 Auxiliary Output Press both buttons together Switching code Forand Car For regular remote transmitter Only Operation XT 43 LCD TRANSMITTER OPERATION LCD REMOTE CONTROL TRANSMITTER 5 a Q hg SAVE 7m IGN 5 ai 3 m wm Sie B He xX I lt ALL Gh 3 cits A Note If the system is interfered by stronger radio frequency around sources of high voltage electric power or such obstacles like tall buildings and so on the transmission range may get shorter as the system uses low output powered frequency BATTERY REPLACEMENT E A 1 5V type AAA Alkaline battery powers the Remote l H Transmitter When the power of 4 the battery weakens a Si z icon shall be displayed on the AAA LCD screen When the old battery is replaced with a new t one there will be beep sounds indicate the power is up Note Press the button two times when the battery compartment is empty and then insert the new battery THE REMOTE LCD ICONS WITH FUNCTION a rr Door Lock Door Unlock Your vehicle Your vehicle doors are doors are unlocked locked amp itr gt Start Mode AS Valet Mode Your vehi ie is runmng All the function shall be temp
12. n parking lights and dome light will turn on alerting of an intrusion for 30 seconds Then it will stop and automatic reset and re arm If one of the sensors or detectors is still active the alarm system will sound a maximum of 6 times of 30 seconds cycles DOME LIGHT CONVENIENCE DELAY amp SUPERVISION This system is a unique feature which will turn on your vehicle dome light as following optional Additional installation required 1 Upon unlocking the interior lights will remain on for 30 seconds 2 If the vehicle is intruded the interior light will flash for the same duration as the siren Note Turning on the ignition switch or activating the system will turn off the dome light IGNITION CONTROL DOOR LOCKS If the vehicle s door locks have been interfaced to the security system the system will automatically lock the vehicle s doors when the ignition 13 is turned ON and or unlock the vehicle s doors when the ignition is turned OFF TRUNK RELEASE Press and hold the button on transmitter for two seconds to remote control the trunk release or other electric devices CAR LOCATOR Press the button once with armed mode to active car locator function The horn will chirp 6 times The parking light will flash 12 times for you to easily locate your car REMOTE START OPERATION WARNINGS As with any product that performs automatic functions there are certain safety precautions that you must prac
13. n on as long as the system is in valet mode Exit Valet Mode 1 Return to normal operation turn ignition on 2 Push and hold valet switch for 2 seconds The LED will turn off 12 indicating the system has exited the valet mode PANIC FUNCTION The transmitter can be used as a remote panic switch to manually trigger the vehicle s siren horn in case of emergency 1 Press and hold the f button for 3 second The siren horn will immediately sound 2 During panic mode the normal function of this transmitter button will be suspended The and buttons can be used to lock and unlock the doors if the option is installed however once the button is pressed the vehicle s starter disable device where installed will be enabled allowing the vehicle to start 3 To stop the panic press and hold the button on the transmitter Also if any transmitter button other than the or m button is pressed and released the panic mode will be turned off immediately 4 If no buttons are pressed the panic function will stop automatically in 60 seconds TRIGGER THE SYSTEM When armed your vehicle is protected as follows 1 Light impacts will trigger the warn away with 3 long chirps from siren horn 2 Heavy impacts Doors open Hood open Trunk open Turn on the ignition key will all trigger the programmed sequence The starter disable relay if installed prevents the vehicle s starter from cranking The siren hor
14. o start and run the engine every 3 hours The engine will run for the programmed run time and then shut down 15 IMPORTANT Timer Start should be used only in open areas Never start and run the vehicle in on enclosed space as a garage or carport 3 hours timer start This feature is design for an extreme cold climate usage The system will auto start the vehicle every 3 hours to prevent engine freezing and hard to start A MAXIMUM OF SIX CYCLES CAN OCCUR ENTER 1 Press the button once to remote start the vehicle As soon as the vehicle is running and the parking lights have turned ON 2 Immediately press the button then press K button once The parking light will flash 3 times The siren chirps 3 times The vehicle is now programmed to start every 3 hours 3 Press the brake pedal to stop the vehicle running Exit the timer start Timer start can be exited manually as follows 1 Repeat the Enter Steps from above Or 1 Make sure the remote start system is not operating the engine 2 Turn the ignition on The LED and parking light will flash 4 times The horn chirps 4 times SHUT DOWN INPUT FOR REMOTE STARTER If any of the following conditions exist while the system is operating the engine will not start or will shut down immediately 1 The hood is opened 2 The brake pedal is pressed 3 Move the optional remote start enable toggle switch to OFF position If installed Engine is over revved
15. ody Sound Cycle the ignition then press the R button first within 3 seconds press and buttons at the same time It will clear the flash icon and melody sound on the LCD screen transceiver Stop The Trigger Melody Sound While triggering the alarm the LCD screen will alert the user through melody sound and flashing trigger icon Press any button on the LCD remote transmitter to stop the melody sound PANIC FUNCTION IF SIREN or HORN IS INSTALLED The transmitter can be used as a remote panic switch to manually trigger the vehicle s horn in case of emergency 1 Press and hold the f button for 3 second The siren will immediately sound 2 During panic mode the normal function of this transmitter button will be suspended The and m buttons can be used to lock and unlock the doors if the option is installed 3 To stop the panic press the button on the transmitter again 4 If no buttons are pressed the panic function will stop automatically in 30 seconds TRUNK RELEASE Additional Installation Required Press and hold the button on transmitter for two seconds to remote control the trunk release or other electric devices CAR LOCATOR ONLY IF SIREN or HORN IS INSTALLED Press the button once when the system is armed to active car locator function The horn will chirp 6 times The parking light will flash 12 times for you to easily locate your car TO REMOTE START THE VEHICLE When you want to start y
16. orarily on hold You are transmitting the You are within the remote signal to control unit control range Remote Transmission k In Range Indicator CB Low Battery gt Trunk Release Trunk open Trunk symbol only You have to replace the battery of remote control AAA Vibration Mode iV AOA Remote Control vibrates IGN Ignition On when the system is triggered SAVE Power Save Mode Save the battery power PROGRAM MODE FOR LCD REMOTE CONTROL TRANSCEIVER Press and hold all fur remote control buttons simultaneously unit 4 one long beep is heard LCD Programming has now been entered Car Operation seconds seconds seconds Li hai 5 seconds Melody Sound seconds ACTIVE LOCK 1 Press f button on the transmitter 2 The Siren will chirp once and parking lights will flash once indicating that the system is now active The vehicle doors will lock upon activating only when interfaced with the keyless entry system SILENT LOCKING UNLOCKING Pressing the am buttons together on the transmitter will lock or unlock your system No chirp sound will be heard Lock unlock confirmation will be seen through the vehicle s parking lights only ACTIVE UNLOCK 1 Press mi button on the transmitter 2 The horn will chirp twice and parking light will flash twice to indicating that the keyless system is now unlocked The vehicle doors will unlock and dome lights will turn on for 30 seconds 2 way LCD Remote Control Transceiv
17. our vehicle 1 Press button once on the transmitter 2 The parking lights will flash to indicate the emote start received the signal 3 The engine will start in approximately 5 seconds 4 A few seconds after the engine is running the parking lights will turn on again and climate controls will activate and adjust the vehicles interior temperature to your preset setting 5 The vehicle will run for a 5 to 30 minute cycle and automatically shut down TO OVERRIDE VEHICLE FROM REMOTE START CONTROL To operate the vehicle while it is running from the remote start 1 Insert the ignition key and turn it to ON not the start position 2 Press the brake pedal Note If the brake pedal is pressed before the key is in the ON position the engine will shut down TEMPORARY STOP FEATURE This feature allows the vehicle to remain running after the key has been removed from the ignition This feature is useful for occasions when you wish to exit and lock the vehicle for short periods of time but would like to leave the engine running and the climate control on 1 Before turning off the engine press the button once on the transmitter The parking lights will come on and the LED will flash 3 times to confirm Temporary Stop feature ON 2 Turn the ignition key to OFF position The engine will stay running 3 The engine will run until the pre programmed time elapsed or shutdown input is received CHANGING THE BATTERY IN Y
18. rior to such return a Return Authorization Number should be obtained Auto Page will return the equipment charges prepaid Warranty Service can be provided through the dealer where the equipment is originally purchased Any unexpired WARRANTY shall be applicable to equipment and parts in the possession of the original purchaser only THIS WARRANTY IS IN LIEU OF ANY AND ALL OTHER WARRANTIES EXPRESSED OR IMPLIED INCLUDING BUT NOT LIMITED TO ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE 17 8 Auto Page shall not be liable under the foregoing WARRANTIES or otherwise for Any personal injury of any kind to the purchaser its employees or agents or anyone else whomsoever resulting directly or indirectly from the use or presence of the equipment or parts Consequential damages of any kind any inability of the purchaser to use the equipment IMPORTANT NOTE Any damages to the Auto Page system resulting from an installation performed by anyone other than a professional installation technician authorized by a dealer of Auto Page will void the product s Limited Lifetime Warranty IMPORTANT NOTE Any damages to the alarm system resulting from an installation performed by anyone other than a professional installation technician authorized by a dealer of Auto Page will void the product s limited lifetime warranty Auto Page Warranty You must register your product online at http www autopageusa com to receive
19. tice and be aware of 1 Keep the transmitter out of children s reach 2 Do not leave anyone in the vehicle while running on remote control 3 Alert servicing personnel that the vehicle can be started automatically 4 Do not start the vehicle by remote while it s in an enclosed area or garage 5 Always apply the parking brake and lock the vehicle as you exit the vehicle 6 Should the unit malfunction disconnect the fuse until the problem is corrected 7 The use and operations of this system is the sole responsibility of the operator 8 Some areas may have local ordinances that prohibit leaving a vehicle running on public streets A TO REMOTE START THE VEHICLE When you want to start your vehicle 1 Press button once on the transmitter 2 The parking lights will flash to indicate the remote start received the signal 3 The engine will start approximately 5 seconds 4 Once the engine is running after a couple of seconds the parking light will turn on again and climate controls will activate and adjust the vehicles interior temperature to your preset setting 5 The vehicle will run for 5to 30 minute cycle and automatically shut down SAFETY START OPERATION The safety start feature allows you to press the button Twice before the vehicle will remote start or remote shut down NOTE The Remote Start Unit will not start the vehicle f any one of the following conditions exists 1 The hood is opened 2 Th
20. will remain in this temporary state for as long as you wish To exit passive by pass press the or m button and the system will 10 return to normal status ACTIVE UNLOCK amp DISARMING 1 Press ml button on the transmitter 2 The siren will chirp twice and parking light will flash twice to indicating that the security system is now disarmed The vehicle doors will unlock and dome lights will turn on for 30 seconds TAMPER DISARMING If the alarm was triggered in your absence upon disarming the system the siren will chirp 4 times the parking lights will flash 3 times PATHWAY ILLUMINATION This feature turns the parking light ON for 30 seconds upon a unlock signal and for 10 seconds upon the lock signal TWO STEPS DOOR UNLOCK This feature will independently unlock the driver door only when deactivating the system Pushing the button a second time within 3 seconds will unlock the entire vehicle Please refer to your installing dealer to install and activate this feature LED DISPLAY ss Zone 1 Warn Away Trigger 2 ashes Zone 2 Trigger Trunk Hood pause Slow On Solid Valet Mode Zone3 Trigger on Door pause Switch pause Sensor pause Switch CHIRP INDICATOR Ar 3 chirps Defective 3 flashes Disarm Triggered Reminder Disarm Triggered 12 flashes Car Locator Constant On Under Remote Star PARKING LIGHTS Siren Horn Parking Light Dome Light 1 or 3 Chirps 1 Flash Slow Fl
Download Pdf Manuals
Related Search