Home

Mitsubishi G-50A Air Conditioner User Manual

1. 2 Click ON import The screen to read a file will be displayed Set the reading folder input the file name and click on During processing operation the progress ratio will be displayed Se E aan a Notice The operation monitor data MTD obtained by Win3 1 95 98 versions Ver 3 can also be imported j f 1 The reverse operation is not allowed 4 6 4 Text Convert SS ee 1 Clicking Montor to display Data list screen containing the file desired to edit Text conversion can also be adapted to the Pre error data For the converting method refer to 4 5 1 5 2 Click on Monitor Data desired to convert into text format 3 Click on Text Convert The screen to confirm the selected monitor data Clicking on provides text conversion processing and then a file name will be displayed Refer to 5 4 Text Convert Data In the case of Operation Monitor clicking select the object and method of the conversion a Click on units Set the Sampling Time between 1 min and 10 min b Clickon mo Converting Please wait for a moment will be appeared then a file name will be displayed Samping Tima cq i D Refer to 5 4 Text Convert Data p ae c Clickon Tes to transfer the data of all units d Click on Rehun to end the Data Transfer Screen During processing ope
2. Bahrd Octobe 1a SOS On 3 6 Connecting Information Connect Infor Items Performed Here Indoor units connected to outdoor units interlock units and the operation group SC such as system controller and remote controller connected to indoor units can be monitored here Select and double click the interlock units and operation group SC remote controller only the Connecting Information Screen will display as a pop up menu The screen displays addresses and attributes of the units connected to the select unit 3 6 1 Screen Transfer Operation 1 Clickon Connect Infor on the Main Screen 2 Click on the OC for the outdoor unit to be monitored a Se Only outdoor units can be selected 3 Momentarily the message Monitoring Please wait 1 E for a moment will appear NOTE Even with the direct expansion type when units other than outdoor units are selected by 2 the screen returns to the Main Screen where it waits for function selection input 2 3 6 2 2 4 Momentarily the Connecting Information Screen So will appear 5 Click on to end the Connecting Information Screen 6 The message Finish the Connecting Information will appear to end or click ON Cancel to Click on and the Main Screen appears continue Click on M 3 6 2 Screen Functions and Operation 1 Double click on the interlock unit and operation group SC remote controller the
3. Unit address Binding information on operation status output OO OO00000000 Unit digit 0 No binding LO O000000000 1 Binding Unit address Tens digit IC CONNECT lt IC connection status gt 125456 7S9A lt Unit address Connection status of air conditioner indoor unit OO OO000000000 Unit digit 0 Not connected LO O000000000 1 Connected Unit address Tens digit J lt Unit address lt nv Transmitting receiving data gt Rev 8nd Tens digit Latest value of network variables Bae Gabel See S Rev Received value of operation command input 1 00 00 00 04 Snd Output value of operation status 9 00 00 00 OO St state field data A V1 value field data Unit address Unit digit Display example Rev Snd St VI St VI Operaio ot os on ce nei DATA lt nci set value gt StartHhrtBt 1e00 0 Set value of configuration property startQutTm 1800 0 tnalacWidth 17 34 3 3 Trend graph Clicking 1 Procedure for graphing nan a Click Option on the menu bar b The sub menu of Graph detail setting and Other setting will be displayed Click Graph detail setting to set each item of the graph SE Note Without setting of each item on Graph detail setting no graph can be displayed The graph detail setting is explained in c and other setting is in d 6 c Graph Detail Setting Screen will be displayed C tnt cues gt 55 1 Click your desired number f
4. Malfunction Log Operation Control 23 3 2 Function Chart Connecting Information Refer to 3 6 This allows monitoring of the indoor units connected to the outdoor unit and of the interlock units and the operation group SC connected to indoor units Operation Monitor Refer to 3 7 This allows monitoring of the operating condition of the unit and operating data The operation data obtained will be shown in the form of a graph Utilizing the mail communication mode in addition the operation monitoring data collected by G 50A can periodically be transmitted to remote mail servers and it can be referred as the off line data later The Mail communication mode can not be used with MN Converter connected Malfunction Log Refer to 3 8 This allows monitoring of the ten most recent errors of the unit Optional Setting Refer to 3 9 This allows monitoring of self diagnosis function operation control and pre error data monitoring This also allows to monitor the response to any M NET command transmitted to the unit Time setting Operation Control Refer to 3 10 This allows the same operation as with the remote controller 3 3 Address Search Method 3 3 1 Address Search Method Selection 1 Start the M NET Maintenance Tools and the Select The Address Searching Method Scr
5. Local Area Connection Properties screen will be displayed 8 Select the Advanced tab 9 Confirm that the checking column of Internet Connection Firewall has been affixed with a check mark 10 Click the Settings button 11 The Advanced Settings screen will be displayed 12 Click the checking column of Internet Mail Server SMTP within the Service tab to affix a check mark 13 Click the OK button to close the Advanced Settings screen ll In the case of G 50 Network Remote Connection Dialup The procedure for the items of 1 3 is same as that of G 50 Network Local Connection LAN 4 Open the Network Connection screen 5 Select the Dialup name used for G 50 Network Remote Connection1 Dialup and right click to display the sub menu 6 Select Properties from the sub menu displayed 7 Properties of Dialup name will be displayed 8 Double click the Advanced tab 9 Confirm that the checking column of Internet Connection Firewall has been affixed with a check mark 10 Click the Settings button 60 11 Advanced Settings will be displayed 12 Click the checking column of Internet Mail Server SMTP within the Service tab to affix a check mark 13 Click the OK button to close the Advanced Settings screen Now the setting of Firewall has completed Close all screens and start Maintenance Tool Caution For se
6. remaining storage capacity is getting insufficient during data reception by mail Warning Screen will appear In this case suspend the mail checking and delete unnecessary data on Offline Screen to keep a proper capacity 51 4 4 System Information 4 4 1 Off Line Analyzing a 1 Click on to display the data list screen of System Information 2 Click on Monitor Data desired to monitor 3 Click on oftine Analyze i The System Information Screen of Off Line 1 displays all connection information memorized by the connected G 50 7 5 Notice This covers the operation with the menu of the e555 right clicking of the mouse Refer to 4 6 6 Right clicking menu 4 Click on the address Button of the attributes to be displayed and the Unit Information Display Column is shown in the same way as when on line The Function Selection Buttons cannot be used 5 Menu Bar Return Print and Help are displayed on the menu bar Click on Return to end the system information Refer to 6 Click on Print and then select Hard Copy from the sub menu The hard copy of the screen will be printed out from the connected printer Click on Help and an explanation Terminology and Operation Method will be displayed Refer to 3 6 Connecting Information 3 6 2 2 Menu Bar 6 Click on Return on the menu bar to end system inf
7. 04 is represented by Ms MTDX 5 3 Pre error Data The data saved in Section 3 9 4 Monitoring of Pre error Data is stored in c ProgramFiles mnttool32 DATA The following is an explanation of the file name Pre error Data has been automatically stored at the on line monitoring PE_20040315_181026 MIDX L Extension ae Monitor nial Default Fixed PE Changeable to any desired name The data obtained before Ver4 04 is represented by E se MTDX 5 4 Text Convert Data The data saved in Section 4 6 4 Text Convert is stored in c ProgramFiles mnttool32 DATA The following is an explanation of the file name OM_20040315_ 181026 001 CSV L _y Extension Lo Serial No 001 999 Seal Monitor Time 1 Able to set at Text Convert freely Fixed OM or PE or ML J The data obtained before Ver4 04 is represented by M E _ CSV 1 Monitor Time Monitor starting time YYYYMMDD_HHMMSS format For the data obtained before Ver4 04 via MN Converter MN PC host name will be displayed at the former part of the data 58 6 How to change setting of Firewall How to Change Setting of Firewall for Windows XP 1 Introduction When connecting Maintenance Tool through G 50A normal communication may not be performed if Firewall the security function of Windows XP has wholly been validated In E Mail mode and MN converter connection it is not related Therefore the setting of Firewa
8. Alamis To connect by using Dial up select the Connection name of dialup router of the local G 50 being previously set on the dialup connection screen of Windows And enter User name and Password for the connection with the dialup router and lastly enter the IP address of G 50 Same as1 4 3 2 Marder MN Cormerter To connect under E mail mode enter the Gere E mail address of G 50 to be connected Refer to1 4 3 3 To connect remotely with MN Converter and Modem select Modem MN Converter 3 Enter special notes if any on the comment column After entering and selecting the above press OK Set various information as required by repeating the items a c above ar 5 Using the area selecting section allows you to extract the Miil Dueira L aan E j Far ad i ed oye only area desired to display oT fin E c i a Soil d x 3 TE pa pa IiE Fq b Ane FER ja 4 F m j Lr a _y Mied Cache Dhi i i tire 19 d Other setting You may select the mail address of maintenance tool PC itself and the Com port to be used To use the E mail mode mail setting is essentially required Mail setting of maintenance tool PC 3 1 POP server Receiving sania nia POP server address noe bee Ale Set the IP address of the receiving mail server POP3 ii aces of Maintenance Tool or domain name POP account so FE Set the POP account user ID for mail receiving Sree POP password fad hd
9. OC is eliminated Please check the malfunction log in G 50 to check the malfunction log of OC Address 051 3 8 2 Screen Functions and Operations 1 Click On Change and the Address Change Screen appear Click on AJ WI to change the address aa The unit attributes are displayed at this time Attribute OC If there is no unit at the address given the attributes are not i Cancel given Once the address has been set click on __ The units are changed A If there is no unit at the address given the message Unit doesn t i nib range ies exist in this address Retry again will appear Retry again Click on to return to the Address Change Screen Address setting error Ea 3 Menu Bar The menu bar displays File and Help By clicking File and then selecting Save as from the sub menu the Malfunction Log data will be output and saved in the CSV format This data can not be viewed on the offline screen Click on File and then select Return from the sub menu to end the Malfunction Log Screen and return to the Main Screen Click on Help and an explanation about Terminology and Operation Method will be appear Refer to 3 6 Connecting Information 3 6 2 2 Menu Bar The error history being memorized by G 50 can also be monitor displayed Display can not be performed when connecting with MN Converter The system controllers other than G 50 can
10. Operation System SC Connecting Information Screen in case operation group SC will appear as a pop up plL menu The screen displays addresses and attributes of each connected unit NOTE The BC controller BC Subsidiary outdoor unit OS are indicated in the outdoor unit column 2 Menu Bar Return and Help appear in the menu bar Click on Return to end the Connecting Information Screen and return to the Main Screen amp I File Edit Bookmark Options Help Connecting Information Term Click on Help and the Help Screen appear Click on Contents and the index for the Help Screen appear Click on Back and the unit returns to its previous operating state Click on Print and the currently displayed screen is printed Caution Do not print while on line There is a chance that it could interfere with operation Click on Term and Explanation of Terminology Screen appear Abbreviations codes and other terms are explained on the explanation of terminology screen Operation Method In Menu Box Return Close the connection data return to the main screen Help Explanation of the symbols used on the monitor and explanation on the current opened screen of operation method Function Button Interlock unit Operation group SC When clicked the Inter locking unit or Operation SC the clicked unit information of the connected units will be displayed on the screen
11. POP Pieces interval s t SMTP Server SMTP Sero Address Extend the interval when the server is crowded al Adress Sat Mad Agda frit 7 i 2 SMTP server Transmitting SMTP server address Mote Advanced Connect Cancel Set the IP address of transmitting mail server of Maintenance Tool 3 Mail address Set the mail address of Maintenance Tool Clicking Close Advanced closes Advanced screen 3 After setting the mail information about the G 50 connected and that about Maintenance Tool click CONNECT 16 1 4 4 Starting the Off Line Monitor When offline analysis is adapted to the data collected under ONLINE MODE 1 Clicking Offline Analyze on the selection screen of Monitor Pease Set kiato smos i oon Tell Freee mode Last click select f wit CONVERTER r Gf Meret J i Ofte oP ST Aaa PR WS rece rare Ciria re Arye 1 4 5 Using the Wide area access mode Under the Wide area access mode the access method for remote connection can be registered to the database of each customer enabling easy online connection with the air conditioning system of the customer desired to be accessed Remote access method LAN Accessing by directly connecting Maintenance Tool PC and G 50A with LAN WAN Dialup Accessing by dialup connection to G 50A via public network E mail Accessing by E mail communication to G 50A via mail server Modem MN Converter Accessing by connecti
12. manually The method of change is given below 1 Select Control Panel from the Start menu 2 The Control Panel screen will be displayed 3 Click Network and Internet Connections 4 Click Network Connections 5 The Network Connections screen will be displayed 6 Right click on the characters of Local Area Connection to display the sub menu 7 Select Properties from the sub menu and then click it 8 The Local Area Connection Properties screen will be displayed B a ee Ci ee The rpranar am Oy eee ay a P bie gal Fere ergy br Pr emi Fee a lt Niel Pinis iri s W ime Pa Er i bien pni coche b medn demm oe e a Eemi maei 9 Select the Advanced tab M pipa m a h CT 10 Click the Settings button 2 pmm ma g bamn a eT LE Om Lir 62 11 The Windows Firewall screen will be displayed Confirm that Firewall is being set to On recommendedg Do not affix a check mark to Don t allow exceptions 12 Click the Exceptions tab 13 Click the checking column of MntTool382 Maintenance Tool to affix a check mark When Maintenance Tool is not displayed on the program list click the Add Program to add Maintenance Tool a Clicking the Add program button displays the screen to add a program b Clicking the Browse button on the Add a Program screen displays the Browse screen c After selec
13. menu bar Click Other setting T Other Setting Screen will be displayed 1 Moving Scroll bar by dragging or clicking aJe changes the value of the horizontal grid line from 0 to 4 The horizontal grid line will be displayed on the graph in a number of the value above The sampling time can not be set by on line E afa EN 35 2 Clicking returns to Trend Graph Screen cr displaying the horizontal grid line in the number being SS set to the graph e Starting the graph Clicking _ _ initiates monitoring to graph the data for each one minute The sampling time to allow graphing by online system is limited to 500 minutes maximum If 500 minutes are exceeded the data of old time is eliminated by the excess time lt TUTESI 2 Screen function and operation The current monitor data is displayed on Lower column Clicking Graph number makes the graph line bold Current time is displayed Clicking _ _ suspends the monitoring At suspension Scaler will be displayed on the graph Dragging the scaler displays the data on the scaler at the current value column and Time at the under part of the graph number Moving Scroll bar by dragging or clicking moves the display range of the graph Operation can be operated as same as the local remote mm controller E O Ce Refer to 3 10 Operation control Here BC operation cannot be c
14. model name of the connected MN Converter Local Connection 3 CMSHNE and the COM port No of the connected RS 232C Last ae eee i 3s i ca F click Select a ees win c Sree Wilks Se pa riche C Cre Doran P Ceti E ra 1 4 2 2 In case for remote connection This will be used when online monitoring is adapted to air conditioning system by using a modem and connecting the maintenance tool and MN Converter with public telephone circuit remotely The setting up of the modem for Windows modem at the remote site side and the initial setting up modem connecting MN Converter at the local side For detail refer to 3 are previously required The connection of the modem public telephone circuit and local MN Converter is necessary For a description of the on site air conditioner system connection method refer to the MN Converter Operation Manual If communication does not have for 10 minutes in remote connection Timeout occurred will be displayed if O K is pushed a telephone circuit will be cut automatically and the Maintenance tool will be ended Tarbas l hmm roma 1 After clicking MN CONVERTER on the selection screen A a of Monitor mode and click REMOTE CONNECTION Sermo For MN Converter CMS MNF B will automatically be 9 P selected Then select COM port No of RS 232C Fm hye connected with equipment like a modem for connection G50 Nute to public telephone line Last clic
15. not provide the monitoring of error history 38 3 9 Optional Setting Optional Set Items Performed Here Self Diagnosis Monitoring The self diagnosis function LED for service monitor to be performed with Dip SW on the circuit board of the outdoor unit can be monitored Operation Control Controlling of unit operation can be performed in the same manner as a remote controller Sending Command Allows to monitor the response for any M NET command transmitted to the unit Monitoring of Pre error Data The operation status of the unit OC OS until generating an error can be monitored in a unit of minute Date Time Setting A setup of the present time can be performed to outdoor unit It is used for the time when abnormalities occurred 1 Click on _ Optional Set from the function selection buttons on the Main Screen 2 Click on the units to be monitored or operated 3 The Optional Setting Screen will be appear Click on Item to be monitored or operated Click on __ tense and the Address Change Screen appears Refer to 3 8 Malfunction Log 3 8 2 1 The sending receiving data are displayed on the Lower Column gt 4 Click on eum to end the Optional Setting Screen and return to the Main Screen 3 9 1 Self Diagnosis Monitoring 1 Click on Set Charen Horton and the Self Diagnosis Monitoring Screen will appear 2 Set the self diagnosis SW value w
16. of Pre error is displayed not allowing operation 2 As the screen opens the monitoring of the data of a the selected unit before error occurred will J automatically be started Rot 3 After ending the monitoring the data of the selected unit before error occurred is displayed in a unit of minute on Pre error Data Screen Each figure on the upper column indicates a number of minute before generating an error respectively The change of the display content is performed with Up down left right scroll bar The number of displayed items and that of the stored data per minute differ depending on the selected item 4 Menu Bar The menu bar displays Return and Help Click on Return to end the Pre error Data Screen and return to the Optional Setting Screen As the screen to save data will appear change the data OR name as required and save it You may enter your na comment also ieee aaa After saving return to the Optional Setting Screen Click on Help and an explanation about Terminology and Operation Method will be displayed Refer to 3 6 Connecting Information 3 6 2 2 Menu Bar 40 3 9 5 Date Time Setting 1 Click on Date Time Seting The Date Time Setting Ucci reen ns and the present time of PC is displ i wh yyy hh mm s Screen opens and the present time of PC is displayed uo gero g Set When the unit which does not correspond to a setup of ees ae time
17. the maintenance tool to MN Converter via public telephone circuit allow conducting various monitoring and setting as same in the case of local connection network RS 2320 M NET MODEM MN Converter Maintenance Tools PC E EL For the remote connection utilizing MN Converter an isolator is required to be inserted between the modem and MN Converter For detail please see Installation Manual annexing of MN Converter CMS MNF 1 1 2 On Line Monitor via G 50 The On Line Monitor is connected to the unit by the central controller G 50A and can monitor such areas as system data unit data and operating data 1 In case for local connection monitoring setting can be performed from the Maintenance Tools M NET LAN LCI is G 50A Hi E E E E E E By directly connecting the PC installed with Maintenance Tools and G 50A through LAN various lo G TTE LF LL ELA Maintenance Tools PC M NET 2 1 In case for remote connection Dialup connection mode By connecting the PC installed with Maintenance Tools and G 50A through public network remotely various monitoring setting can be performed from the Maintenance Tools LAN aa Penn O IIIT Be lt MODEM etc Dial up Router feel tae E Maintenance Tool PC 2 2 In case for remote connection E mail connection mode Under E mail connection mode communication can be executed with G 50A through E mail transmission
18. via mail server All communication with G 50A is converted into E mail in this case Provider1 Mail server Provider2 Mail server Mail server gt s l 4 4 E mail gt LJ J f L7 af T MT g SMTP i Maintenance Tools PC Access point Notice eTo use the E mail connection mode the version of G 50 should be above 2 60 eWhen using E mail connection mode the local G 50A is required to be initially set with Maintenance Tool and the mail address by the G 50A initial setting tool For each mail address it is required to obtain and set an exclusive one To transmit mail via an internet provider obtain the mail address from the provider When a mail server is existing on the LAN obtain the mail address from the LAN administrator Set the Pop receive interval within 3 minutes However to monitor operating status Operation Monitor set it within 1 Setting of initial information to G 50A can not be executed from Maintenance Tool Make sure to set it from the G 50A minute initial setting tool locally If dialup connection environment is available it can be set from a remote posit
19. your computer after completing the STEP 4 Request eFor setting up be sure to practice 4 steps in order Otherwise Maintenance Tools will not operate normally Step 1 Ending the Maintenance Tool End the Maintenance Tool program Refer to 1 4 5 Ending the Maintenance Tool Step 2 Uninstalling the Maintenance Tool Uninstall the Maintenance Tool program Refer to 1 3 3 Uninstalling the Maintenance Tool Request e After uninstalling Maintenance Tool program be sure to restart your computer Step 3 Upgrade the Database Execute Setup bat located in VerUp 1 DB UPDATE folder of CD ROM Double clicking on Setup bat with the explorer displays the command prompt screen The setting up processing ends within about 10 seconds and the screen closes When the set up processing is completed Press any key to continue will be displayed at the bottom of the screen Please wait for this display About 10 seconds 3 minutes are required to complete the set up processing The screen will be closed by pressing any button after completing the processing with the display of Press any key to continue Notice During database setting the process may be observed as stopped for a while However it is still under operation internally Wait for some time until Press any key to continue appears without doing anything Do not stop the set up procedure by pressing XI at the upper right of the screen Step 4 Upgrade the Ma
20. EATER Last click Select f a G iti T eoe LAN Rypma Connection Ces U Rinio Connecter Eta c Sate ohn he Pe es ee i Prva Dirt Corwin Pete A a Ewi 2 Next IP address input screen is displayed Here input IP address of G 50A connected to the air conditioning Please Input IF Address of G50 system of which operating information is desired to Cancel monitor and click on Request 192 168 1 1 It is required to set to the IP address in the same system with G 50 to be connected to Maintenance Tool PC from Control Panel 13 1 4 3 2 In case for remote connection Dialup In the case when on line monitoring is applied to local air conditioning system with G 50 installed from the maintenance tool in the remote place via public telephone circuit When utilizing Remote connection Dialup please prepare MODEM and DIAL UP ROUTER of a type allowing data communication by receiving external telephone transmission for the connection with the public circuit in addition to the components used by Local connection LAN For the system composition please refer to the system diagram of 2 1 in 1 1 2 To use Remote connection Dialup it is previously required to register MODEM onto Windows and set the information on the receiver the dial up router at G 50A in the field of the telephone transmission onto the dial up connection screen If communication does not have for 10 minutes in r
21. MITSUBISHI Building Air Conditioning Control System Maintenance Tools for MN converter amp G 50A Advanced Operating Manual Contents Page 1 Foreword 1 1 Introduction of Maintenance Tools 1 1 2 Required Operating Environment 4 1 3 Installation 5 1 4 Starting and Ending the Application 9 2 Terms for Each Section 2 1 Design of Screen 22 2 2 Operating Method 22 3 On Line Monitor Operation Method 3 1 On Line Monitor Screen Transfer 23 3 2 Function Chart 24 3 38 Address Search Method 24 3 4 Main Screen 26 3 5 Function Selection Operations 27 3 6 Connecting Information 27 3 7 Operation Monitor 29 3 8 Malfunction Log 37 3 9 Optional Setting 39 3 10 Operation Control 42 3 11 Free contact of indoor unit 44 4 Off Line Monitor Operating Method 4 1 Off Line Monitor Screen Transfer 46 4 2 Function Chart 47 4 3 Operation Monitor 48 4 4 System Information 52 4 5 Monitoring of Pre error Data 53 4 6 Filing Operation 54 4 7 Offline on Wide area access mode 57 5 File Names 5 1 System Information Data 58 5 2 Operating Status Monitor Data 58 5 3 Pre error Data 58 5 4 Text Convert Data 58 6 How to change setting of Firewall 59 7 Troubleshooting 64 Before using Maintenance Tools read this manual thoroughly to ensure correct operation WT03939X09 1 1 Introduction of Maintenance Tools The Maintenance Tools are comprised of the On Line Monitor and the Off Line Monitor The following two connection methods are availabl
22. Maintenance Tool 1 4 6 1 Ending the On Line Monitor 1 Open the Main Screen 2 Click on File on the menu bar 3 Click on Return in the sub menu 4 The message Are you sure you want to finish maintenance tool will appear Click on The On Line Monitor will end and the Windows screen will appear At ending of Maintenance Tools the telephone circuit will _o Cancel Hoge Select automatically be disconnected T Are you sure you want to rish maintenance tool Clicking Mocs Sweet returns to the selection screen of Monitor mode 1 4 6 2 Ending the Off Line Monitor 1 Open the Off line Analyze Screen 2 Click on Exit l 3 The message Are you sure you want to finish maintenance tool will appear Click on __oK J When finishing Offline Screen immediately after deleting data a message of Finishing Maintenance Tool may m j l ke ll sometime be displayed The internal data is now under arrangement Offline Screen will automatically be finished after D aiem beet Hipi prera F completing this process Please wait a while 3 Ae AE grp ou ard te ires manlar aT OF Ca Moe Eat Clicking Mose Select returns to the selection screen of Monitor mode 21 Terms for Each Section 2 1 Design of Screen The design of the screen is shown below mr _ Title Bar Menu Bar m Function Display Operating Se
23. Screen Change Button Return Clase the connection data return to the main screen 28 3 7 Operation Monitor Monitor Items Performed Here Monitors the operating condition and operating data of the current units every minute This information can be displayed and saved When an excessively large number of the objective unit for monitoring exists the monitoring interval may exceed 1 minute 70s 80s The capacity to store the data obtained by the maintenance tool counts for 2G bite maximum When the remaining storage capacity is getting insufficient during Operation Monitoring Warning Screen will appear In this case suspend the Operation Monitoring move to Offline screen and delete unnecessary data to keep a proper capacity 3 7 1 Screen Transfer Operation 1 Click on Monit on the Main Screen 2 Click on the unit to be monitored If only outdoor unit is 9C selected here the operating data for the units connected to the outdoor unit will be automatically monitored The maximum number which can carry out a monitor changes with selected models An error message will appear if the limited number of units is exceeded The standard of the number which can carry out a monitor When only Outdoor Unit is selected One 1 Outdoor Unit 50 Indoor Units One 1 Outdoor Unit Three 3 OC Sub Controller BC BS OS 50 Indoor Units When only Indoor Units are selected 50 Uni
24. ame Customer name and Air conditioning system name of the data In order not to show the POP UP display click the View of d Offline Analyze the menu bar and remove the check mark of the ee etme Show Wide Area Info on the sub menu 4 Show Widearea Infa 2 Display of extracted data By selecting AREA name and Customer name the relevant data only can be displayed As the other function and operation are same as that under the normal mode please refer to Chapters 4 3 4 6 Notice Both the data obtained by online under normal mode and that under wide area access mode can be displayed commonly under both offline modes 57 5 Filenames 5 1 System Information Data The data saved in Section 3 4 Main Screen 2 is stored in c ProgramFiles mnttool32 DATA The following is an explanation of the file name SI_20040315_181026 MTDX L Extension Monitor m Default Fixed SI Changeable to any desired name The data obtained before Ver4 04 is represented by SoTi r MTDX 5 2 Operating Status Monitor Data The data saved in Section 3 7 Operation Monitor is stored in c ProgramFiles mnttool32 DATA The following is an explanation of the file name Operating Status Monitor Data has been automatically stored at the on line monitoring OM_20040315_181026 MTDX L Extension lt Monitor Hg Default Fixed OM Changeable to any desired name The data obtained before Ver4
25. ames the product names used in this manual 1 2 1 Hardware Requirements The computer must be IBM compatible on DOS V and capable of satisfying the following requirements OS goa Windows2000 or WindowsXP Recommended English version 1 CPU dui Pentiumlll 500 MHz Recommended 1GHz or more RAM ss aa anenseeensseenees Minimum 128 MB Recommended 256MB or more HDD xierntiinees Available space 5 GB or more 2 SCD arnese Display resolution XGA 1024x768 or more Unit should be equipped with a pointing device such as a mouse pointer or track ball 1 About OS Fundamentally it corresponds to OS of each country However separators of time and date differ in each language This separator may affect a maintenance tool It recommends using it by English OS and Regional options setup changing into English area form Or it recommends using it changing date separator into and time separator into 2 About Hard Disk Space The hard disk space recommended above is only the amount required for installing the maintenance application Additional space will be required if the operating data is also to be stored on the hard disk Accordingly there may not be enough memory to store operating data if the maintenance system is installed in a computer with limited hard disk memory NOTE TG 2000A and Maintenance Tool cannot operate with the same personal computer 1 2 2 Required Materials The following materials are needed for operatin
26. anually check the contact status of indoor units at each address select the Manual monitor mode a Click the Manual monitor button on the mode selection section b Click the Address button of the unit desired to be monitored The contact status will be monitored from the unit for display aie 7 7 T T 3 sicie Pm Be S a ial i tel a 5 ee ee ee ie 5j a i m i A Lal saja il Attribute The unit attribute will be displayed lt 7 Indoor unit contact mode ge The contact mode being set will be monitored and a check mark will be affixed on the applied x mode Input contact monitor The ON OFF status of each input contact will be monitored for display Output contact monitor operation The ON OFF status of each output contact will be monitored for display In the case of output contacts the status shown with bold letter represents the present status In the case of non objective attribute and when the contact mode is under normal control the above monitor display will be 44 2 Automatic monitoring To automatically monitor the contact status of indoor units of No 1 50 repeatedly select the Auto monitor mode a Click the Auto monitor button on the mode selection section The contact status of indoor units of No 1 50 will automatically be monitored and this operation will be repeated The display for Attribute Indoor unit contac
27. arch and Sampling setting Clicking Graph detail setting displays Graph Detail Setting Screen For the setting method please refer to 3 7 Operation Monitor 3 7 3 1 Procedure for graphing The sampling time to allow graphing by offline system is limited to 1515 minutes records maximum If 1515 minutes records are exceeded the data after it is not displayed on graph Clicking Time search displays Time Search Screen For the operation method please refer to 4 3 1 4 b MENU BAR Time searching When the sampling interval is not set up in 1 minute it does not search even if it performs a time search function 49 Clicking Sampling setting displays Sampling Ce Setting Screen Seek label Set the sampling time interval by moving Scroll bar i or input through the keyboard A For the sampling interval set the time interval of the abscissas axis with 1 10 minutes For the horizontal grid line refer to 3 7 3 1 Procedure for graphing H r L z m e e aa b Screen function and operation 1 Clicking Graph number makes the graph line bold _ 3 2 Moving Scaler by dragging displays Data on the scaler at the current value column and Date Time at the lower part of the graph number 3 Moving Scroll bar by dragging or clicking gt moves the range of the graph being displayed NOTE When a scroll bar or is clicked a scroll button may s
28. arried out Clicking Clear clears the graph being displayed The set values of the graph setting items and other setting items will remain unchanged 3 Ending the graph To finish Trend Graph Screen and return to Operation Status Monitor Screen click Return on the menu bar or click __ Fem A message of Finish the trend graph and return to the monitor will be displayed For returning click while not returning click el Clicking L returns to Operation Status Monitor Screen 36 3 8 Malfunction Log Malfunc Log Items Performed Here The malfunction log of the most recent 10 cases except operation group SC 3 8 1 Screen Transfer Operation 1 Click on Malfunc Log from the function selection buttons on the Main Screen 2 Click on the units to be monitored except operation group SC 3 The message Monitoring Please wait for a moment will appear 4 Momentarily the Malfunction Log Screen will appear 3 8 2 3 If the number of incidents in the malfunction log is less than ten will appear in the attribute column and FFFF will appear in the code column Error detailed No Error detailed No may be displayed on the right of an error code by the model which carries out a monitor Refer to the service handbook for the implications of detailed No When the monitor of the unit with a simple clock c arm function is carried out the time which malfunction 3 8 2 2 gener
29. ated or the time when it was integrated to unusual generating is displayed When the unit has received a setup of time The time which malfunction generated is displayed When the unit has not received the setup of time The addition time from a power supply injection when malfunction occur is displayed Note While the power supply of a unit turns off time does not count the simple clock function of a unit Therefore the display of the time which malfunction generated and addition time will be a mere rough standard About a flag display When a flag is 1 The state which the power supply does not turn off after receiving a setup of time When a flag is O A setup of time is not received Or the state which the power failure generated after receiving a setup of time About PC Time Unit Time PC Time The present time set as the maintenance tool PC Unit Time The present time which carried out the monitor from the unit with a simple clock function Note When the system controller which transmits a setup of time to a unit periodically is not connected a year and moon data are not updated In this case the date column of unit time maybe counted up till the 9999th 37 Pam to end the Malfuncion Log Screen The message Close the malfunction a display will be displayed me ac to end or click on to not end 5 Note When G 50A is connected to the system the malfunction log of
30. button oe ee Confirm the folder on which this program should be installed To change the installation folder C drive only a CEA O a TORT a A ar Use Previous button After confirming the installation Teli bs aeh Mi Ti ral pil ree og dle ns ore folder click on Next button et eee Clicking on Cancel button stops installation procedure Fete R zP F Pie iF En i Pm Lael a ae oe Be ery e 3 Confirming the installation start Mane erara z Toul or eloers PON al BA 1 Confirm the starting and select Next button Contirm Installabon Clicking on Next button starts installation Clicking on Cancel button stops installation The atin nly bl eter bsp 200 an pour cog 4 Confirming the completion of Maintenance Tools setup Fe Mara eran eT ad for fiche eal A 1 Select Close button installation Complete Click on Close button on the Installation Complete screen riers ond Ae wines 0 ard a er ae wet After completing installation restart your computer Cii Tiss hi eal Keep the CD ROM used with you carefully Request e After installing Maintenance Tools be sure to restart your computer 1 3 2 Running Maintenance Tool Upgrade The following describes how to upgrade the Maintenance Tool Step 1 Ending the Maintenance Tool Step 2 Uninstalling the Maintenance Tool Restart your computer after completing the STEP 2 Step 3 Upgrade the Database Step 4 Upgrade the Maintenance Tool Restart
31. changed please search an address after re starting a Maintenance tool and G 50 25 3 4 Main Screen The operations in 3 3 Address Search Method have made information about the units known The Unit Attributes are displayed on top of the address buttons The Function Buttons are now enabled at this time wane 1 Click on an address Button displaying attributes gt c c ae and information about that unit will be displayed in the Unit Information Display Columns 2 The menu bar will display File Option Print and Help Click on File and Save System Information and Return sub menu can be selected Click on Save System Information and the message Are you sure you want to save the System Information will appear Clicking displays the screen to save data Change the data name as required and save it You may enter your comment also CE Click ON Canc to return to the Main Screen Peara input manvioe cata rarm Daane E a Refer to 5 1 System Information Data Click on Return to end the operation of the On line monitor Refer to 1 4 5 1 Ending the On Line Monitor Click on Option and Automatic searching and the Stop mail communication sub menus can be selected At the connection of MN Converter Stop mail communication is not displayed Click on Automatic searching and the message Start the automatic searching Is
32. ction Title Bar Displays the title of the screen Menu Bar Displays the functions that can be performed using the current screen Click on an item and a sub menu or message screen will appear as shown in the illustration If a sub menu appears further function selections can be made Example of what the screen looks like when option is clicked Function Display Operating Section Displays the contents of the screen and the operation to be performed 2 2 Operating Method The following operations are performed by mouse 1 Click Align the mouse pointer with the desired button and press the left button on the mouse This is known as a Click In general all maintenance tool operations are performed with click operations 2 Drag A drag is when the mouse pointer is moved while the left button is held down If you desired to check the bottom screen when two or more screens are being displayed on top of each other align the mouse pointer with the title bar of the top screen and drag it The bottom screen can now be seen 22 an On Line Monitor Operating Method 3 1 On Line Monitor Screen Transfer Title Screen Optional Setting Main Screen J ear 1 iH 1i Ii itt ile 1H mi yp nm EN any I ai I BEN peee Optional Set Connect Infor Monitor Connecting Information Operation Monitor bray H Maltune Log Operation
33. ction common for each screen Filing operation Delete Data Refer to 4 6 1 The offline data selected can be deleted Expotrt Refer to 4 6 2 Allows to output the off line data selected on the screen as a separate file from the database Import Refer to 4 6 3 Allows to take the off line data being output as a file by Export into the database Text Convert Refer to 4 6 4 Allows to output the off line data being displayed on the screen as a file in Text format from the database The system information data can not be converted The Pre error data can be converted in text on Offline Analysis Screen Changing the name of monitor data You may change the monitor data name on the screen of the data list Right clicking menu Clicking the right button of the mouse on the Monitor data desired to be operated displays the pop up menu Using the pop up menu facilitates your operation The offline mode includes 2 types the normal mode and wide area access mode Although the functions of both modes are almost same however under the wide area access mode the following functions are provided additionally 1 Display of monitored name objective for data collection The AREA name Customer and Air conditioning system name are shown for each data obtained 2 Display of extracted data By selectin
34. curity protection while connecting with Internet and the like it is recommended to restore the settings of Firewall to the original one after terminating Maintenance Tool Remove the check mark of Internet Mail Server SMTP to restore its original status 3 2 In the case of Windows XP Service Pack 2 With Windows XP Service Pack 2 the Windows Security Alert P E ai screen will be displayed at the initial starting G 50 Network of p Tis ae ai es e ee Paa i la Maintenance Tool No display in the case of Service Pack 1 he pii eard j beeg Dikici ieg Hei gauea daa Te Ham Im Yei GE Hoin Eban une Babie birdman Ekete Coz Selecting the Unblock button on this screen completes all settings of Firewall tere m O rtn J _ gah irate rekan Feel Fee Ede ed ee Bees ey deere Gee eee he rieret arrestor lt pou mcognae the peognene of vet the DAE you can L Bate SMe gs me Tete fy Supplement For Windows XP ServicePack2 it may be set whether the receiving port of the network is to be blocked or not per application Selecting Unblock realizes normal communication by opening minimum receiving ports required during the operation of the relevant application program After the termination of the application the receiving ports not used will automatically be blocked for further security 61 On the Windows Security Alert screen if Keep Blocking or Ask Me Later has been selected the settings of Firewall should be changed
35. e in the Online Monitoring 1 Monitoring by connecting the maintenance tool to MN converter CMS MNF via RS 232C 2 Monitoring through the central controller G 50 by connecting the maintenance tool to LAN A brief explanation of each of their function is provided here To use the maintenance tool via G 50 Network license registration for the G 50 to be used is necessary Purchasing the license No for each G 50 to be used conduct the license registration through the Web browser http IP address of the G 50A administrator html After selecting Maintenance tool of the optional function on the Web Browser Screen displayed enter the purchased license No For the detail of the license registration see Chapter 4 Registering a License for Optional Functions of Central Controller Model G 50A Web Browser Operation Manual For manager 1 1 1 On Line Monitor via MN converter The On Line Monitor is connected to the unit by a MN Converter CMS MNF and can monitor such areas as system data unit data and operating data 1 In case for local connection Connecting PC installed with the maintenance tool to M NET transmission line via MN Converter allows conducting various monitoring and setting from the maintenance tool M NET RS 232C M NET i i Le ee eee aan J MN Converter Maintenance Tools PC FH ee l E ed ed 2 In case for remote connection Using a modem and remotely connecting PC installed with
36. e with X oF Del key and rename processing with button 2 Name and address setting of G 50A Double clicking at a position desired to enter provides the input mode Set the name and address accordingly Be sure to set the name of G 50A also The deleting processing can be executed with the i Del key or Edit menu It can also be performed by the Delete setting of the sub menu displayed by right clicking Selection order Selection of G 50A to be connected with Click the customer name folder desired to connect to open the address book of the project After fitting the cursor to the name of address of G 50A click SELECT button c Advanced setting screen Clicking Open Advanced opens Advanced screen where the mail information about Maintenance Tool may be set When the mail information about Maintenance Tool has not been set Advanced screen is displayed always under opened state Setting of mail information on Maintenance Tool ye 1 POP server Receiving Customer Maria POP server address TE Set the IP address of the receiving mail server POP3 of Maintenance Tool or domain name Mal Address POP account Haerere ea Set the POP account user ID for mail receiving eee a POP password aw Set the user password for mail receiving eee POP receive interval Select the mail receiving interval The default value represents 5sec It can be selected within a range of 5 180sec
37. ed on the menu bar Neither Graph nor Ref may be used Other menus are same as that of other units 32 3 Introduction to the screen inis Hsp A ide i HUES BLD 2G th ms Pe ae SLED 4 TAi f Tal pe Eej J234h6TS9A lt Function set switch gt SWI OLOO000000 Set status of function selector switch SW QO0O000 0 OFF setting 1 ON setting SWS OO0000 SWABS lt Extension switch gt OOOO Set status of extension function selector switch 0 OFF setting 1 ON setting WL 1 lt M NET address switch gt AQ Set status of M NET address switch on LM ADAPTER SWU1 The units digit SWU2 The tens digit l23456F83ABCUEF lt Control flag gt FLAG 1 LOOO000 Internal processing status of LM ADAPTER BRROR OO1 TOOOCOOO00000 FLAG Control flag status LON FLAG ooo0o000 ERROR Error flag status FFEOGR onoo00oooOmMooOOoOnNO M M NET communication processing flag LON LonWorks communication processing flag O Reset 1 Set CHOZAS lt General input gt 11 General input status of LM ADAPTER O Normal 1 Detecting PWR PLR O lt Power failure flag gt Indicating power failure detecting status of LM ADAPTER O Powering 1 Interrupting LnvitnOff n lt Binding status nvoOnOff_n gt 1254567894 lt Unit address Binding information on operation command input QO OO00000000 Unit digit 0 No binding LO OO00000000 1 Binding t Unit address Tens digit 33 Display nvoOnOff n lt Binding status nvoOnOff_n gt 1244567894 lt
38. een will appear after the Title Screen 2 Click on either address search method to select the Automatic Search The Maintenance Tools automatically searches for and displays information about units connected to the M Net transmission line Manual Search The user optionally searches for the units connect to the M Net transmission line Sing Oem 10 5000 24 3 3 2 Automatic Searching 1 Click on Auto and the Automatic Address Searching Screen will appear The time required to complete the automatic search will depend on the PC The address currently being searched for is R displayed as Address Up to 250 addresses can resent re Ee eee pe eae ae p E Click on to end automatic search The Main Screen will appear i20 nowa Monor GNO i Capoa ranch anoe Mose iniho Connectng inormangn 2 When automatic search has ended the Main Screen will appear Returning to the Main Screen enables the Function Buttons 3 3 3 Manual Searching 1 Click on vema jand the Main Screen will appear 2 Click on the Button of the address desired and searching will begin Eel j 3 3 159 t Tira 13 ma 109 193 TEE m j Airm A Mocel J Wier Guo Sapacty Beco F iioi rie Sal Pme CO o o indore 2 kT et Ailey m Aftinbyte Sahaday October 10 202 eos Note When a system is
39. emote connection Timeout occurred will be displayed if O K is pushed a telephone circuit will be cut automatically and the Maintenance tool will be ended 1 After clicking G 50 Network on the selection screen of aera ies Monitor mode and click REMOTE CONNECTION Dialup Horal moc Last click sea ohne r E 4s hte Lace Goinechon LAH Remo Correct Cig fi Rare Gorreg EHW Offre Arahe Wal fee es Pree Grane Cora rO Ea Gra Remote Monitor 2 Next Remote Monitor screen is displayed eae Here select the connection name of the dial up router at fFocsa G 50A in the field desired to be remotely connected It is being set previously on the dial up connection Piel screen Then input Dial up user name and Dial up Dialup Password 950 password to connect with the dial up router and click on Connect a cet After connecting to the telephone circuit on line monitoring can be performed as same as the case when connected with LAN g50 14 1 4 3 3 In case for remote connection E mail In the case when on line monitoring is applied to local air conditioning system with G 50 installed from the maintenance tool in the remote place via mail server All communication to G 50 is converted in E mail in this case Notice e To use the E mail connection mode the version of G 50 should be above 2 60 eWhen using E mail connection mode the local G 50A is required to be initiall
40. eration Status Monitor Screen will appear 30 8 Click on Eem to end the Operating Status Monitor Screen The message Finish the operation oe monitor will appear Click on to end or click on to not end Clicking Ys displays the screen to save data Change the data name as required and save it You Aro you sro yourvant to sane may enter your comment also Cata Name EDEMEME Clicking i does not allow the data to be saved Returning to the main screen a ee 3 7 2 Screen Functions and Operations The operating condition and operating data are displayed every minute The Current Time is displayed The Monitor ID is displayed when saving data Refer to 5 2 Operation Status Monitor Data 1 Operation Buttons allows operation in the same manner as a remote controller Refer to 3 10 Operation Control Click on Rem to end the operation status monitor and return to the Main Screen Refer to 3 7 1 8 2 Menu Bar Return Print Graph and Help are displayed on the menu bar Click on Return to end the Operation Status Monitor lt and return to the Main Screen Click on Print and then select Print screen from the sub menu The hard copy of the screen will be printed from the connected printer Clicking Graph displays a message of Make the graph to data To graphing click Ye while to return to the pasa monitor screen withou
41. erver resides on the LAN obtain the mail address from the LAN administrator When sending mail via an ISP a user contract with the ISP is required To Mail Address Set the mail addresses of the recipients to which mail is sent The mail address of recipient To acquires and sets up the address only for maintenance tools SMTP Server IP Set the mail server IP address in the Mail Server Information SMTP Server IP field When sending mail via an ISP set the ISP address of the ISP mail server When the mail server resides on the LAN obtain the IP address from the LAN administrator If the only information available on the ISP mail server is a domain name use a PC to connect to the Internet open a DOS prompt and type ping domain name Set the IP address that is displayed as the ping response Monitor Finish Data Set the date of monitor data transmit period Mail Sending Interval Set the transmit interval of monitor data max 240 min Then click on After a while it returns to the main screen but the mail transmission to remote receivers will be performed by G 50A automatically At the connection of MN Converter the screen to select monitor method is not displayed Real time Monitor Mode is always commenced not allowing to use Mail communication Mode 6 In the case of real time monitoring the message Monitoring Please wait for a moment will appear again 7 Momentarily the Op
42. etting Select a registered modem setup file at the Select Initial Settings File Box The contents of the selected Select initial settings Tile file will be listed below the selection box Click on _ Transmission and the modem will be set up according to the contents selected at the selection AT box AT commands are sent to the modem Check if transfer with the modem is normal at the New settings Transfer with Modem Status Screen Transmission Click on Newsettings to initialize another modem Send the initialize command and register the transfer Delete contents for the modem at the AT Command Transmit Screen Refer to b Return Click on Delete to delete the selected modem settings from the registered settings When the number of registrations limit is exceeded delete the unwanted contents Refer to b Click on Retum to return to the Connection Setting Screen b Perform new modem setup Pena verer meme Enter the command you want to set you want to send sue to the modem at the AT command input text Then click on Transmission to send the entered AT command to the modem The response from the oat q modem will appear below the entered AT command nt Check the contents AT COHMAND After transmission to the modem is complete click on feastr The contents sent to the modem will be ae registered as an initialize file Registered in the setup file list of the Co
43. fter a mail communication setup However the maintenance tool by the side of a setup is using dial up service and mail transmission cannot be performed Consequently since the maintenance tool with which mail is transmitted cannot acquire system configuration information mail even if it receives after that operation monitor data mail it does not indicate by normal 66 Please set up the right information again after performing Stop mail communication of 3 4 2 PEIEE EO contract of is made with the provider to FROM Mail Address f a acquires and sets up the address only for maintenance tools Please delete the corresponding data Text conversion can be carried out and data can be outputted When mail communication mode is set up from the maintenance tool of a remote place mail acquisition of operation data can be performed only with the maintenance tool which set up Please make a set the mail address of a maintenance tool which set mail communication mode to the mail address of recipient To oecific troubles induced by E mail connection mode The message of Not connectable to mail The initial information is not being set to server or Not connectable to G 50 Is displayed The message of Network possibly disconnected finishing Maintenance Tool is displayed The message of operation status mails at mail server After receiving mail under offline mode start E ma
44. g AREA name and Customer name the relevant data only can be displayed Notice Both the data obtained by online under normal mode and that under wide area access mode can be displayed commonly under both offline modes 47 4 3 Operation Monitor Items Performed Here Monitors and prints about the System Information and the Operating Data of units saved using the on line monitor 4 3 1 Off Line Analyzing 1 Click on to display the data list screen of Operation Monitor T E a f ra F z 3 2 Click on Monitor Data desired to be monitored 3 Click on ornearre Notice This covers the operation with the menu of the right clicking of the mouse Refer to 4 6 6 Right clicking menu 4 Operation Status Monitor Screen a Click on the buttons to display Teen x f ele ee vini data from one minute before or one minute after b Menu Bar The menu bar displays Return Print Time Searching Help Click on Return to end the Operation Status Monitor Screen Refer to c pe lt i gt Click on Print and then select Print screen from the Return Timne Searching Print Help sub menu lt 0632 02 20 REE 302 gt The hard copy of the screen will be printed from the connected printer SUES allah AGES EC Cor lMode stap F Hz Ope Mode stap AK 0 AL 1 Click on Time Searching and the Time Searching Screen will appear Enter the Date and Time When ente
45. g the Maintenance Tools 1 In case of routing via MN converter MN Converter CMS MNF Personal Computer RS 232 cross and modem in the case of remote connection are required RS 232 C is to be straight cable in this case For detail please see Installation Manual annexing of MN Converter CMS MNF 2 In case of routing via G 50 G 50 personal computer LAN cable Straight and HUB A dial up router is required for remote communication For the dial up router to be used employ that allowing data communication by receiving external telephone transmission 1 3 Installation There are two Maintenance Tool setup methods Caution Method 1 New setup See Section 1 3 1 Please refer to also 1 3 4 RE Method 2 Upgrading with existing setup See Section 1 3 2 Change of computer name on PC 1 3 1 Setting Up the Maintenance Tools New setup To set up Maintenance Tools follow the 3 steps below Step 1 Setting up of MSDE After finishing Step 1 PC restarts automatically Step 2 Setting up of database Restarting PC is essential before going to Step 2 Step 3 Setting up of Maintenance Tools Request eFor setting up be sure to practice 3 steps in order Otherwise Maintenance Tools will not operate normally eBefore setting up be sure to log in with the log in name authorized as administrator Step 1 Setting up the MSDE Notice eBefore Setting up the MSDE restart your computer and Ending software for application prog
46. he button of Monitor Data Monitor Date Last Updated and Others at the upper column allows to sort the displayed data The right clicking operation of the mouse covers the operation of each file also For detail refer to the item 4 6 5 Right click menu 4 6 1 Delete Data 1 Clicking either D Monitor Systeminfo or PrE to display Data list screen containing the file desired to edit 2 Click on Monitor Data desired to delete 3 Click on Dewis Then the screen to confirm the selected monitor data will appear Clicking on deletes the data Clicking on No returns to Data list screen Selecting monitor data collectively enables to execute batch deletion This operation may be performed in the similar way of the file selection of Windows explorer shift ctrl 4 6 2 Export 1 Clicking either Monitor Eoee or Fretiror to display Data list screen containing the file desired to edit S 2 Click on Monitor Data desired to output 3 Clickon Bgort f The screen to store a file wiil be displayed Set the storing folder input the file name and click on sede Be i Save babar om amk S During processing operation the progress ratio will be displayed 4 6 3 Import 1 Clicking either Monitor DSetemmo or to display Data list screen containing the file desired mz ror ian r e to edit
47. iS chosen the message of This function iS not r O AE available is displayed and it cannot set up 2 Aclick of sets the time currently displayed to a unit The time to set up can also be changed on a screen Cursor is united with a change point and a numerical value is inputted 3 Click on _ ome to end the Date Time Setting Screen and return to the Main Screen 41 3 10 Operation Control Items Performed Here ON OFF of the unit the operation mode and setting the temperature can be performed in the same manner as a remote controller 3 10 1 Screen Transfer Operation 1 Click on Operation from the function selection buttons on the Main Screen 2 Click on the unit to be controled 3 The Operation Control Screen will be appear This display shows the current conditions 3 10 2 Screen Functions and Operation Indoor unit LOSSNAY unit 1 Set each desired Item 2 After setting the operation item click ON Transmission The item will not be transmitted if a check is removed Please remove a check if needed Click on and the command which resets a filter sign will transmit f a Is chosen operation can do the whole system in a package Only four items of ON OFF Mode Temp Set and Fan However Operation ON cannot be operated 3 Click on change and the Address Change Screen will appear Refer to 3 8 Malfunction Log 3 8 2 1 4 Menu Bar Help ap
48. ie aaa create the Area folder wae x z b Creating the Customer name folder Pin io Sting Pp 1 Right clicking the Area name folder to be AALS registered displays the sub menu aoa fau 2 Select Create Custormer ai 3 As the screen to enter the Customer name ee EE appears set a proper customer name In addition to the above mouse operation the creation of AREA name and Customer name can be set from the menu bar File or tool bar Figure By applying the same operation procedure right clicking menu bar tool bar each folder can be deleted Also the name of each folder can be changed Caution lf a folder is deleted all information customer name air conditioning system name etc will be deleted similarly 18 eI m c Setting the Air conditioning system name aeaea 1 Under the state when the Customer name folder desired to be set on the air conditioning amer e system is focussed the sub menu wil be a displayed by right clicking the air conditioning system list at the right screen 2 Selecting Create displays Setting screen of air conditioning system Setting screen of air conditioning system So Quattor ithe Ceci Dicey Sven Mare Ease south on 1 roe Ceo Med 1 Set the system name 2 Select the method to connect with the system Fa To connect by using LAN WAN enter the IP GA IP Address address of G 50 to be connected Same as 1 4 3 1
49. il mode again Returning to mode selection screen is displayed The operation monitor screen is not displayed normally G 50 The mail address of Maintenance Tool is not being registered previously The mail address normally obtained is not being set The version of G 50 is not exceeding 2 60 The setting of the mail server address is not correct The setting of environments like for LAN cable connection is not correct Displays when the normal communication with G 50 was not performed Displays when the operation monitor mail is remained at the mail server The action of Maintenance Tool will be delayed caused by a time required by the search processing of remaining mail The POP receiving interval of Maintenance Tool is being set to over 2 minutes Operation control screen is being opened for over 20 minutes on the operation monitor screen Free contact of indoor unit Trouble A menu cannot be chosen and cannot be The version of G 50 is old Execute the initial setting of Maintenance Tool or G 50A mail address on the local G 50A by using the G 50A initial setting tool Verify the set contents of the mail server mail address Obtain and use the mail address individually for each Maintenance Tool PC Set the connection environment correctly Maintenance Tool is finished forcibly Restart Maintenance Tool after a while After removing the operation monitor mail under Off line mode execute E mail c
50. intenance Tool Execute setup exe located in VerUp 2 MNTTOOL UPDATE folder of CD ROM Double clicking on setup exe The Maintenance Tool program version upgrading procedure is the same as new setup Refer to 1 3 1 Step 3 Setting up the Maintenance Tool Request e After installing Maintenance Tool program be sure to restart your computer 1 3 3 Uninstalling the Maintenance Tools The method to uninstall the application of the Maintenance Tools once installed is given below 1 Uninstalling the Maintenance Tools 1 Confirm the ending of Maintenance Tools Confirm that Maintenance Tools program has been ended If not end the program For the ending method refer to Chapter 1 4 5 2 Start Add Remove Programs Click on Add Remove Programs from Control panel to Start 3 Select Maintenance Tool for windows 2000 and XP and press Change amp Remove button Select Maintenance Tool for windows 2000 and XP from the application and click on Remove button The deletion of Maintenance Tools application starts Notice eRecommend not to delete the common components e There are folders and files that can not be deleted with this uninstalling Example C Program files Mnttool32 4 Ending the Add Remove Programs After ending the deletion of application end Add Remove Programs 1 3 4 RE Change of computer name on PC Do not change the computer name after the Maintenance tool has been setup Maintena
51. ion For detail please refer to 6 1 Mail Basic Setting in the instruction manual of the G 50A initial setting tool e The communication speed under E mail connection mode largely depends on the transfer rate of each mail server Under the circumstance the action of Maintenance Tool may take a lot of time under some internet environments or routing mail servers 1 1 3 Off Line Monitor The Off Line Monitor can display print information obtained by the On Line Monitor In the case of connection monitoring utilizing G 50 the operation monitor data collected by G 50A will be transmitted to remote mail servers periodically if the Operation monitor mail communication mode of online mode is adapted Using this function allows to collect and monitor the operation monitor data without continually connecting the maintenance tool For the setting of the Operation monitor mail communication mode refer to 3 7 1 and 4 3 3 description Image of the Operation monitor mail communication mode Operation monitor mail saat Provider1 data acquisition Mail server l Collecting the operation Provider2 LAN monitoring data of inne Mail server air conditioners Operation monitor data automatic mail transmit Maintenance Acce ss point Tools PC Provider 2 Access poi
52. it OK will appear Click on _ to perform automatic searching or click on to return to the Main Screen For more information about automatic searching refer to 3 3 Address Search Method 3 3 2 Automatic Searching Click on Stop mail communication and the Stop mail communication Screen will appear Clicking on es_ stops the mail transfer processing of operation monotor data to remote mail servers out a while the setting completion message appears Clicking on N Stop mail communication OK returns to the main screen Clicking on Ne returns to the main screen directly Clicking on Print prints out the display currently shown on the screen Click on Help and Explanation of Terminology and Operation Method sub menus can be selected Refer to 3 6 Connecting Information 3 6 2 2 Menu Bar 26 Note Stop mail communication is a function to stop the operation monitor mail transmission of G 50 under mail communication mode set in Chapter 3 7 It has no relation with 2 2 E mail connection mode of 1 1 2 On line Monitor via G 50 3 5 Function Selection Operations 1 First click on the desired Function Selection Button E 2 Next click on the Unit to Operate 3 The screen will move to the various operation screens 4 If the wrong function selection button is clicked click on that button once again and the other function selection buttons will be enabled
53. it is normal Trouble Cause Repair Cannot clear malfunction log The unit is not compatible with The malfunction log cannot be cleared malfunction log clear There is an error code but the contents of This is a newly added error code and is the error are not displayed not compatible with the maintenance Refer to the service handbook for that unit tools eration Monitor Mail Communication Mode Trouble Operation monitor mail cannot receive normally The analysis screen of the operation monitor data which carried out mail acquisition by OFFLINE is not displayed A mail address and SMTP server information were made a mistake in and set up by mail communication setup The mail address a contract of is not made with a provider was set as FROM Mail Address When using dialup The mail address of recipient To is not an address only for maintenance tools The mail address used usually is set up In this case once other mail software receives mail operation data mail will be deleted from a mail server The system configuration information acquired from G 50 immediately after a mail communication setup was not acquired normally cn Mail communication mode was set up from the maintenance tool of a remote place and the mail address of recipient To was set as another addressing toa maintenance tool of a remote place System configuration information mail is transmitted from G 50 immediately a
54. ith AV For the set value use the No on the List of LED monitor display of the Service Handbook for each unit N After setting the set value click on Seeing l The self diagnosis LED display will be shown with flag or nmumerial value eR a EEEE lf the unit other than the outdoor unit or the set value being not corresponded is sended the characters Not corresponded and Attribute and Version are displayed Click on Cina to end the Self Diagnosis Monitoring Screen and return to the Optional Setting Screen S 3 9 2 Operation Control Refer to 3 10 Operation Control 39 3 9 3 Sending Command 1 Click on Sanang Command and the Sending Command Screen will appear iz ele ee ee Fale es fe fe fie 2 Input M NET command desired to transmit by clicking on the button baled Direct input from the keyboard is also possible ose 3 After inputting command click on Seir Response command is displayed on Answer column 4 Click on aw to end the Sending Command Screen and return to the Optional Setting Screen NOTE Use this function after obtaining the knowledge of M NET command 3 9 4 Monitoring of Pre error Data re 1 Click on and the Pre error Data ciate atin SS Se H Screen will appear s When it chooses except the outdoor unit or constant speed unit OS the message of This model doesn t have the function of Monitoring
55. k Select Cees Aras MN Converter to be locally installed should be CMS MNF B Remote connection can not be pica tte performed with CMS MNF ae O Oma Arii 2 Next the screen to set remote connection will appear In order to conduct the initial setting AT command setting of eo fo ba eect the modem to be used click s and to initiate MODEM rita conny remote connection click Thon banaa E aA Insert an isolator between the local MN Converter and modem for insulation Inserting the isolator reduces the number of lines used by the internal wiring of RS 323C For this reason it is required to select before the remote connection to change the setting information on the modem to be installed at the local side For detail see Installation Manual annexing of MN Converter CMS MNF 10 3 Initial setting of modem For the modem to be installed at the local side MN Converter side initial setting should be applied before connecting remotely To apply the initial setting of the modem click it mss remote setting screen The Connection Modem Initial Setting Screen will appear A modem that is already initialized does not have to be re initialized The explanation of the operation only is described here For the detail of the setting content see Installation Manual annexing of MN Converter CMS MNF a Explanation of screen Connection modem initial s
56. license for G 50 The term of validity of the installed version It upgrades Please upgrade periodically went out Trouble with Main Screen Cannot select function selection buttons A appears in the unit address button for an existing unit Collecting data about individual units using manual search Unit is communicating No response from that unit Attributes cannot be known due to communication error 64 Can be used when communication with all the units selected by manual search have completed communication Wait a moment and then click on the address button for the same unit again A Jappears in the unit address button for Interference caused an non existing unit a unit that does not exist A appears in the address button Address searching takes 3 minutes or more per set G 50 connection There is a unit that is not compatible with the maintenance tools The port required for communication is being protected by the Firewall checking function of Windows or anti virus software When a maintenance tool is not ended normally G 50 will be in a data resending state and LAN communication will increase Connecting information Trouble Trouble Cause Repair Cannot switch to connection information A unit other than an outdoor unit OC has Refer to 3 6 1 screen been selected The connection data display does not An operating SC other than remote appear when the operating sys
57. ll should partially be changed following the procedure indicated in Chapter 3 How to change the setting of Firewall 2 Applicable case 1 Should the following symptoms occur at the Address Searching of OC 051 100 it may be possible that the communication from G 50A can not be received normally as the communication port to use has been blocked by Firewall e Requiring a lot of time for searching e Not displaying the connecting relation as shown in the right figure In such case terminate Maintenance Tool once and change the setting of Firewall me a e a 3 How to change the setting of Firewall The method to change the setting differs depending on the Service Pack loaded as explained below e 3 1 For WINDOWS XP Service Pack 1 In the case of G 50 Network Local connection LAN Il In the case of G 50 Network Remote connection 1 Dialup e 3 2 For WINDOWS XP Service Pack 2 3 1 For Windows XP Service Pack 1 In the case of G 50 Network Local connection LAN 1 Select Control Panel from Start menu 2 Click Switch to Classic View to switch the Control Panel screen to Classic View Ll en a g 3 i i Double click Network Connection 4 The Network Connection screen will be displayed 5 Right click on the characters of Local Area Connection to display the sub menu 6 Select Properties from the sub menu and then click it 59 7 The
58. nce tool will not run properly if changed and may require the OS to be installed again 1 4 Starting and Ending the Application 1 4 1 Starting the Maintenance Tool 1 Connect the computer and G 50A MN Converter and air conditioner 2 Click on Start and then click on Programs 3 Click on Maintenance Tool for Windows2000 amp XP in the Maintenance Tool folder 4 The Title Screen will soon appear In addition the message of This unit can be changed into F and pounds inch Do you change them is displayed and the temperature is set into F if ves is clicked on while into C if Ne is clicked on After upgrade if a maintenance tool is started for the first time conversion processing of a database may be performed In this case Now Converting database and a progress state are displayed The capacity to store the data obtained by the maintenance tool counts for 2G bite maximum When the remaining storage capacity is insufficient at starting Warning Screen will appear In this case move to OFF Line Screen to delete unnecessary data 5 Thereafter the selection screen of Monitor mode is displayed Selecting the mode to be adapted a ON LINE MODE MN CONVERTER When on line monitoring is adapted to air conditioning system by connecting MN Converter Refer to 1 4 2 1 Further select Remote connection to conduct remote connection Refer to 1 4 2 2 G50 LAN When
59. nection name dialup connection name requires tO popreceve itev gt min omanual set the information on the provider to be connected b P y Set Caml dialup connection from control panel Dialup user name user name for dialup connection Dialup password password for dialup connection POP Server IP address of mail servers for receiving User Name User name for mail receiving Password Password for mail receiving When there are many amounts of data this several hours case is in update of monitor data We recommend you to set up so that interval time may be inputted into POP Receive Interval of Mail Server Setting and a mail check may be carried out periodically A mail check is automatically performed at the set up interval aS 1 Click on Monitor to display the data list screen of Operation Monitor 2 Click ON Check mai f Initiates the checking of the operation monitor data mail for the mail server and storing of the acquired data During the data transfering and storing the progress rate will be displayed 3 After completing of data tranffer and storing the ma e inme eee oe numbers of received mail will be displayed The numbers of the received mail counted here have pareng no relation with the numbers displayed on the monitor data tk Clicking on i be ee oto Monitor The capacity to store the data obtained by the maintenance tool counts for 2G bite maximum When the
60. ng Modem to MN Converter via public telephone circuit After the online connection performed by any of the above methods you may use the similar function as that obtainable in the normal online connection While under the offline mode customer information will be provided to the monitored data enabling only to select a specified customer for display Note Even when connecting under the wide area access mode cautions will be applied as same as under the normal connection mode You are kindly requested to observe the cautions described in the connection method under normal mode as well 1 4 1 1 4 3 17 1 4 5 1 Online Connection 1 Clicking Online Connection Wide area access mode on the Plau Saket Moretor ence section screen of Monitor mode eee Last click Sa 3 a e f Hotet j a r Trae Anard Ae ae ere Pee E Dire Gonchar Omi Anyta 2 The customer registration screen will be displayed a em ee Register customer information in the order of jp 1 gt 2 gt 8 hierarchically 1 Area name a L gt 2 Customer name L gt 3 Air conditioning system name amp connection method a Creating the Area name folder ease ste 1 When Wide Area is being focussed the C sub menu will be displayed by right clicking Ss 2 Select Create Area xz 3 As the screen to enter the AREA name appears a x set a proper Area name and press OK to
61. nishing the maintenance tool finished after completing this process Please wait a while Among the data obtained by Ver3 the operation monitor data MTD can only be imported Regarding to other data the data obtained by Ver 4 has no compatibility with that obtained by Ver 3 A message of The file name is incorrect It contains characters unable to be Please delete such special characters in is displayed Data cannot be fetched in such as or and the like the file name imported Off Line Monitor Trouble 2 Printing is not normally carried out for Please set a setup of a printer as graph etc Grayscale Printing In processing for the time searching or The information inherent in a district Change the setting of the OS to that in text convert of the operation status language will be added on the column of English for use monitor Date or Time is wrong is Date and Time depending on the PC OS Execute processing after deleting the displayed without executing the of the district However such information information characters inherent in the processing inherent in the district can not be read by jdistrict to be added on the column of Date the maintenance tool and Time 68
62. nnection Modem Initial Setting Screen At this time do not forget to enter the registration name Up to ten items can be registered If ten items are already registered new items cannot be registered Delete unwanted items using the Connection Modem Initial Setting Screen Click on Retum to return to the Connection Modem Initial Setting Screen 11 4 Initiating the remote connection To initiate the remote connection click _ m A E on the remote setting screen The Customer Selection Screen will appear This screen EAmEE Ph JAPAN MELOO ers Take connects to the on site remote modem Cont Ctassificaton PE a When the addressee has already been registered select Tel No 1234567890 are the customer name to be connected in Select customer name box and then click connec to initiate Reetum connection Hra In the case of initial connection or to change to a new addressee click regatranon Then the Customer Information Registration Screen will appear b Enter Customer name of the field addressee enter the type of the telephone circuit to be used and the telephone number of the addressee and click The set content will be registered The contents transmitted to the modem vary in the S chosen Line type ieee Pay attention to the following TET When PB is chosen ATDT is added before the E telephone number PE or DP For example when a telephone number i
63. nt Public network Notice eThis differs from the E mail connection mode of 2 2 in 1 1 2 On Line Monitor via G 50 1 1 4 Wide area access mode The Wide area access mode has been located starting from Ver4 06 D Under the Wide area access mode the access method for remote connection can be registered to the database of each customer enabling easy online connection with the air conditioning system of the customer desired to be accessed Remote access method LAN Accessing by directly connecting Maintenance Tool PC and G 50A with LAN WAN Dialup Accessing by dialup connection to G 50A via public network E mail Accessing by E mail communication to G 50A via mail server Modem MN Converter Accessing by connecting Modem to MN Converter via public telephone circuit After the online connection performed by any of the above methods you may use the similar function as that obtainable in the normal online connection While under the offline mode customer information will be provided to the monitored data enabling only to select a specified customer for display 1 2 Required Operating Environment This manual refers to Windows 2000 as Windows 2000 and Windows XP as Windows XP Trademarks MS Microsoft Microsoft logo and Windows are registered trademarks and trade names of Microsoft Corporation Each company may use as registered trademarks and trade n
64. ometimes move continuously In this case it clicks again and please let me move to the position which wants to see graph 4 Clicking displays Graph Detail Setting Screen For the setting method refer to 3 7 3 1 Procedure for graphing __Jis to be clicked when finishing Trend Graph c To finish Trend Graph click Return of MENU BAR or eem trend graph will be displayed to finish while click not to finish Then a message of Finish the 50 4 3 3 Check mail Mail Server Setting In order to provide mail checking to the operation data mail messaged from G 50 by utilizing Mail communication mode Er under online mode the setting is required relating to the connection of the objective mail server a Clicking on the sub menu Mail server setting of Setting on the menu bar displays Mail server setting screen l st MITSUBISHI b For lan connection click on LAN set the items relating to mail servers and click on FTE Items to be set Popserver Ip address of mail servers for receiving r LAN Diskin Network Username User name for mail receiving Connection Name Password Password for mail receiving Dialup Usehame c For diaplup connection click on Dialup Network set the Sate Passwera items relating to dialup and mail servers and clickon POP Seaver POP Usermeane gala ltems to be set cPreed po m Con
65. on line monitoring is adapted to air conditioning system via G 50 by connecting the maintenance tool to LAN Refer to 1 4 3 1 For remote connection select either Dialup connection mode or E mail connection mode Refer to 1 4 3 2 1 4 3 3 b OFF LINE MODE Offline analysis Windows Update gt Intemet Explorer Ea Outlook Express Fa TcpMonitor AT SUS ELEGTRIG Maintenance Tool The unt can be charged into degaes Pahrenhet and pounds incha Maintenance Tool x Q Monitor data size is very large Please Delete old monitor data H Pie Select Monier mac MN CONVERTER E Local Conmoctior 2 CHS MNF B C Remote Connechon C CMS MNF C GSi Network a F C i An Widi Wel Jtotss mode C Online Connection Offine Analyze Cee J oe When offline analysis is adapted to the data collected under ON LINE MODE Refer to 1 4 4 The detail is described in the item 1 4 5 1 4 2 Starting the On Line Monitor MN Converter connection 1 4 2 1 In case for local connection This will be used when online monitoring is adapted to air conditioning system by connecting the maintenance tool and MN Converter locally The maintenance tool MN Converter and air conditioning system should be connected beforehand fore Chel m manir 1 Clicking MN CONVERTER on the selection screen Of Pess ssi uonto mone Monitor mode selects Local connection simultaneously pig peueer Select the
66. onnection mode Set the POP receiving interval within 1 minute Do not open Operation control screen for over 20 minutes on the operation monitor screen A recommendation version is 2 60 or more Off Line Monitor Trouble 1 The message of Timeout Can t connect to Mailserver Is displayed The message of Invalid Parameter is displayed The message of Can t Connect to mail sever is displayed incorrect The setting of the IP address of PC is incorrect not correct The POP server is not set yet Set POP server The LAN cable is not connected correctly Connect LAN cable securely The IP address setting of POP server is Set the correct IP address with Mail The message of POP Authention Error The setting of the user and password of Set correctly with Mail Server Setting is displayed POP server is not correct A message of Monitor data size is very The memory capacity to store data is large Please delete old monitor data is insufficient displayed during collecting the mail of operation data A message of Now finalizing Maintenance Tool is displayed at finishing Offline and the screen does not finish Data cannot be imported It was going to import the data acquired by Maintenance Tools Ver 3 67 Move to Offline Screen and delete unnecessary data The internal data is under arrangement at Offline Screen will automatically be fi
67. operate normally please be sure to remove a check In this case please perform Stop mail communication of 3 4 2 and start a maintenance tool again after waiting about 15 minutes A recommendation version is 2 50 or more Click on remote control Monitoring of connection data cannot be done from operating SC other than remote control Please take a countermeasure against the communication noise source in this case Error with unit Refer to the service handbook for that unit By referring to Instruction Manual of Dial up router connect or set correctly Scan ence e Sor setting tool Refer to Instruction Manual of G 50A initial setting tool Set the monitor finish date correctly However when connecting to G 50A ina region with a time differential set it by considering the time in that place A message of Monitor data size is very The memory capacity to store data is Move to Offline Screen and delete large Please delete old monitor data is displayed during collecting data Data becomes a red display and the display Malfunction Log Since data cannot receive normally There is too much number of a monitor Data transforms itself by a noise Trouble insufficient unnecessary data Reduce the number of a monitor Cope with noise generating origin Also when returning from a graph screen to an operation screen it may become a red display and the display but
68. ormation 52 4 5 Monitoring of Pre error Data 4 5 1 Off Line Analyzing 1 Click on Fretror to display the data list screen of Pre error f 2 Click on Monitor Data desired to monitor 3 Click on Offline Analyze i Notice This covers the operation with the menu of the right clicking of the mouse bae e a Refer to 4 6 6 Right clicking menu 5 4 On the Pre error Data screen the operation status CS He data immediately before generating error will be displayed in a unit of minute Each figure on the upper column indicates a number of minute before generating an error respectively The change of the display content is performed with Up down left right scroll bar The number of displayed items and that of the stored data per minute differ depending on the selected item Menu Bar Return Text convert of file and Help are displayed on the menu bar G Click on Return to end the Monitor before error occurred screen Refer to 6 Clicking Text convert of file prepares a text file of the Before error occurred data being displayed Click on Help and an explanation Terminology and Operation Method will be displayed Refer to 3 6 Connecting Information 3 6 2 2 Menu Bar 6 Click on Return on the menu bar to end the data list screen of Pre error Data 53 4 6 Function common for each screen Filing operation Clicking t
69. pears in the menu bar Click on Help and an explanation of the Operation Method will appear Refer to 3 6 Connecting Information 3 6 2 2 Menu bar 5 Click on Close to end the Operation Control Screen The Main Screen will return Notice When LEV OPENING is changed to prevent failure to release the LEV opening after test run close the operation control screen This release the LEV opening on this screen_automatically However when moving to the operation control screen from the operation monitor screen the LEV opening will be retained even by closing this screen At a timing when finishing the operation monitor screen the LEV opening can be released 42 3 10 3 Screen Functions __2etion_ and Operation BC Controller 1 Click on the button corresponding to the valve number you want to change 0 represents close and 1 represents open To change the valve setting perform Fix Release gt Fix 2 After setting click On Transmission l 3 Click on Monitor to check the current conditions 4 Change the LEV opening with gt Set to the LEV opening Click On Transmission to send the setup contents 5 After adjustment by solenoid valve and LEV opening change is complete click on Cose The Main Screen will return At this time the contents set at this screen become invalid Notice To prevent failure to release the status set after test run close
70. ram and Anti Virus Execute SETUP exe located in SetUp 1 MSDE4VS in the folder of CD ROM Double clicking on SETUP exe with the explorer displays the 7 MSDE setup screen as shown right A Start Installing MSDE PC is reset automatically after completing installation of MSDE Exit other application because after complete installing Windows will restart After closing other application software click OK and start Pee ergs ee cae installation To stop setting up click on Cancel button installing MSDE The setting up processing requires for about 2 3minutes MSDE SETUP If processing progresses to 100 the screen in the right will be displayed Clicking on OK resets PC automatically Please carry out STEP2 after PC s starting Notice After setting up MSDE PC is designed to automatically reset However if this setting up is executed without finishing other application software PC may not be reset automatically In this case reset PC manually After restarting go to Step 2 Without restarting PC Maintenance Tool can not be set up unless replacing OS itself Step 2 Setting up the database Carrs Execute Setup bat located in the folder of SAREE EE Leena aae SetUp 2 DB SETUP of CD ROM Double clicking on Setup bat with the explorer displays the command prompt screen The setting up processing ends within about 10 seconds 3 minutes After ending of the set
71. ration the progress ratio will be displayed 4 6 5 Monitor Data information convert Changing the name of monitor data Clicking the Edit of the menu bar while focussing the monitor data name on the Monitor Data of which name is desired to be changed on the Screen listing each data will display the editing screen Hontor Data OM SUOdISI 131016 HEA 1 fd gt 1 755 On this screen the name of Monitor Data or other relevant zi 5 information can be edited ene aa Morio Date SEREI 1 T54 e 1756 Last Updsisd HIEROI 16 og Canari a Cancel 55 4 6 6 Right clicking menu Right clicking menu Clicking the right button of the mouse on Monitor data displays the pop up menu as shown on the right screen The items that can be set are same as that of the function button on the screen listing each data Some function is unable to operate partially Use them in accordance with your applications foe 23 _ FO40S15_ 141636 2662 23_20040309_183042 2662 25_20M0308_186839 56 4 7 Offline Analyze on Wide area access mode The function of the offline mode is mostly equals that of the normal mode however the following function is provided additionally 1 Display of monitored name objective for data collection The AREA name Customer name and Air conditioning system name are shown for each data obtained Setting the cursor to the data provides the pop up display of the AREA n
72. res Set the user password for mail receiving Se Mal Aae POP receive interval POF Piirin 1H hamis Poe areas Tat AS Oe Par Select the mail receiving interval adari The default value represents 5sec pOH Por It can be selected within a range of 5 180sec Extend the interval when the server is crowded 2 SMTP server Transmitting SMTP server address Set the IP address of transmitting mail server of Maintenance Tool 3 Mail address Set the mail address of Maintenance Tool Clicking Close Advanced closes Advanced screen Setting of Com port To connect Mode select the Com port to be used 3 Focussing on the air conditioning system desired to be connected and pressing Connect will start the te procedure for connection After completing the normal connection the screen moves to the online main screen allowing normal online operation However when the connection method uses Modem MN Converter the screen of the Modem remote connection will appear In this case select the Modem to be connected and proceed the connection procedure Refer to 1 4 2 2 eo h gt Tem Lp 1 4 5 2 Offline Analyze 1 Clicking Offline Analyze Wide area access mode on the Plein Satch Monitor cs i p Ce Gie section screen of Monitor mode Mi CONVERTER Last click Select bi r Ganf Notei rae var wars ba pe ee a Dire Corea fcr F Ota Arni 20 1 4 6 Ending the
73. ress 002 Mutouk 2 OR OFF Does ik transmit 1 Clicking the Close button will close this screen and return to the main screen display 45 4 Off Line Monitor Operating Method 4 1 Off Line Monitor Screen Transfer Titl reen Operation Monitor Offline Analyze a a mm pe te f Operation monitor nite Data list screen r n etl k _Systeminfo Trend graph scr System Information Monitoring of Pre error Data rD TE ee Systemlnfo m info D li reen Pre error D li reen Offline Analyze Offline Analyze i m m information screen Pre error reen 46 4 2 Function Chart 4 2 1 Operation Monitor Off Line Analizing Refer to 4 3 1 Monitors and prints about unit data saved in On Line 3 7 Operation Monitor Graph Refer to 4 3 2 The operation data obtained can be graphed for display Check Mail Refer to 4 3 3 Extracts the operation monitoring data being mail transferred by the remote monitor mode from the mail server 4 2 2 System Information Monitor Off Line Analyzing Refer to 4 4 1 Monitors and prints about unit data saved in On Line 3 4 Main Screen 4 2 3 Monitoring of Pre error Data Off Line Analizing Refer to 4 5 1 Monitors and prints about unit data saved in On Line 3 9 4 Monitoring of Pre error data 4 2 4 Fun
74. ring the time refer to the monitor data time Once the time has been entered click on Ti The entered data will appear If no time data has been entered data for the nearest time will appear Notice Set the data time to be entered to the time presented within the monitor data Setting to the time outside of the monitor time may cause to disable the search function 48 Click on Help and Explanation of Terminology and Operation Method sub menus can be selected Refer to 3 6 Connecting Information 3 6 2 2 Menu Bar c Click on Return on the menu bar to end the Operation Status Monitor Screen The screen returns to the data list screen of Operation Monitor 4 3 2 Graph 1 Click on to display the data list screen of L Operation Monitor 2 Click on Monitor Data desired to be monitored 3 Click on 4 Trend Graph Screen For the Procedure for graphing please refer to 3 7 3 1 Procedure for graphing a The menu bar Return Print and Option are displayed on the menu bar 1 Return is to be clicked when finishing Trend Graph Refer to c 2 Clicking Print allows selecting the sub menu of Hard Copy 00 0000 Clicking Hard Copy displays a message of E 7 Print the data Clicking prints out the screen presently displayed as it is 3 Clicking Option allows selecting the sub menu of Graph detail setting Time se
75. rom Graph 1 5 for oa graphing i Note The number of the graph selected represents the ordinate 2 Select Unit desired to be graphed 3 Select Source Data item desired to be graphed 4 Set Upper limit Lower limit of data You may also set to Auto scale a When the data exceeds the high limit value or low limit value being set under Auto scale setting the above value is replaced by the exceeded value in the setting When the high limit value and low limit value are set before entering 10 will be set to the high limit value and O will be to the low limit value automatically i 5 Graph upper limit Graph lower limit Ordinate display position range may be acceptable as it is Setting is E PPer imitvalue grapii upper limit posit required when the display position range is desired to gt Lower limit value Graph lower limit position change To display over the entire screen enter 100 to the graph high limit position while O to the low limit position TEFA Note The input of the upper limit value lower limit value and graph upper limit position lower limit position can be entered by the ten keys for numerical input besides the entering by the key board lt after completing all setting to return to Trend Graph Screen d Conducting the Other setting With Other setting the optional function to facilitate graph om observation can be set PEE E Click Option on the
76. s P 0123456789 pr PE DP None ols saal salasa ATDT0123456789 is transmitted to the modem ae E tle i seas when DP NONE are en Connect DP ATDP0123456789 oe Rem NONE ATD0123456789 When a circuit connection is impossible in the case of above three which as well ELSE is used When ELSE is chosen nothing is added to before the telephone number Input a command for the circuit connection from the beginning For example ATD0 0123456789 is transmitted to the modem when ATD0 0123456789 is inputted in the telephone number column When the one except for the ELSE is chosen only a number can be inputted in the telephone number column The information for up to 100 customers can be registered When the information for 100 customers has been registered new customer information cannot be registered Delete the unwanted customer information using the customer selection screen c Check the contents then click on Connect l Connection statur indication sereen The Connection Status Indication Screen will appear Connect the line When you want to disconnect the line Telephone line connected Pease walt click on The line will be disconnected 12 1 4 3 Starting the On Line Monitor G 50 connection To use the maintenance tool via G 50 Network license registration for the G 50 to be used is necessary Purchasing the license No for each G 50 to be used conduct the license registration through
77. t mode Input contact monitor and Output contact monitor operation are identical to that in the manual monitoring z E a E F a 2 3 SEE E S M s Gi i a E a hearer ame biirm z pa ET jaa i fom an t i fe Geer pr E if Caen FT es FieRitigzigisxf il ii H E a i E a tal In the case to terminate the auto mode selecting other mode will stop the monitoring 3 11 3 Operation of output contact 1 Contact operation To operate for the ON OFF selection of the output contact of indoor units select the Operation contact mode a Click the Operation contact button on the mode selection section b Click the Output contact ON OFF button of the unit for which the ON OFF of the output contact is desired to be selected for change The state where the button is being depressed with bold letter displays the present output status Option function Affixing a check mark to It checks before transmission displays the warning screen as shown right before transmitting actual transmission command at the operation of output contact To continue the transmission click Yes When a check mark is not affixed the transmission command will be transmitted at the clicking of the Output contact ON OFF button simultaneously 3 11 4 Termination of this function Option y lt checks before tanimi sion Transmission add
78. t graphing Click Click on Help and an explanation about Terminology and Operation Method will be displayed Refer to 3 6 Connecting Information 3 6 2 2 Menu Bar 31 About LM ADAPTER Operation Monitor Monitor ltem Performed Here Operation status of LM ADAPTER current values of network variable and configration property setting status of switch or the like Refer to 3 7 Operation Monitor 1 Screen Transfer Operation Le ee To move to the screen monitoring LM ADAPTER operation spore select LM ADAPTER SC from the main screen LM ADAPTER is expressed by iS t When LM ADAPTER is selected you may not monitor other units Same operation procedure as that of other units is applicable to other main screens aoe e T r ia az 7 aC 3a eco 8 a tees rt He be i F miga eg fo E a 2 Screen Functions and Operations The operating condition and operating data are displayed every minute Current time will be displayed During a time when saving data Monitor ID will also be displayed Refer to 5 2 Operation Status Monitor Data ED Menu Bar A l las Ges PE Piia tier H Operation Button _ lt 1 Operation Button Operation control will not be displayed Click on Return to end the operation status monitor and return to the Main Screen Refer to 3 7 1 8 2 Menu Bar Return Print Graph and Help are display
79. tem SC is control has been clicked clicked Operation Monitor Trouble The monitor display screen on the operation monitor has red characters All of the characters on the monitor display for some units are red The message of G50 can t Connect to SMTP Server or G 50 Date Setting is wrong Continue is displayed at remote monitor setting Because of the increased re transmission process work due to abundant communication noise data may not be monitored fully within the rated cycle There is no answer from the unit Cannot communicate with the unit The dial up router is not connected Or connected but incorrectly The default gateway of G 50A is not set The incorrect display of the receiver address is pointed out by SMTP The Monitor Finish Date is older than the current date time of G 50A 65 Wait a moment and then click on the address button for the same unit again The display will disappear Refer to the explanation on terminology in help If there is no explanation the unit is not a compatible type In this case the communication transmitted from G 50 may not partially be received Please remove the check mark on the Firewall function of the necessary port For detail please refer to Page 57 If the version of G 50 is more than 2 50 only IC can be searched even if it uses FIREWALL However OC reference cannot be performed Moreover since other functions cannot
80. the Web browser http IP address of the G 50A administrator html After selecting Maintenance tool of the optional function on the Web Browser Screen displayed enter the purchased license No For the detail of the license registration see Chapter 4 Registering a License for Optional Functions of Central Controller Model G 50A Web Browser Operation Manual For manager To use the maintenance tool via G 50 Only for LAN mode and Dialup connection mode please check a setup of Internet Connection Firewall of PC If the FIREWALL function is used communication will be normally impossible with G 50A and normal data will not be displayed For detail please refer to 6 How to change setting of Firewall on Page 57 In the case of permanently installing an anti virus software and always started under this environment the fire wall function of this software may be activated sometimes In such case The normal communication with G 50 will be hindered not displaying data normally When operating Maintenance Tool finish the anti virus software once or remove the fire wall function 1 4 3 1 In case for local connection In the case when on line monitoring is applied to air conditioning system via G 50 by connecting the maintenance tool to LAN locally trial hoal m manir 1 Clicking G 50 Network on the selection screen Of Maese ann uats rme Monitor mode selects Local connection simultaneously om m 7 z MA OCin
81. the operation control screen of BC BS controller This releases all the content set on this screen_automatically However when moving to the operation control screen of BC BS controller from the operation monitor screen the set content will be retained even by closing this screen At a timing when finishing the operation monitor screen the set content can be released 43 3 11 Free contact of indoor unit Items Performed Here When utilizing the Indoor unit free contact mode which uses the external input output of Free Plan indoor unit Building Multi together with G 50 and TG 2000 the contact action of the indoor unit can be tested with this function 3 11 1 Starting of this function 1 Screen moving operation and its method M NET Maintenance Tool Local Connection a Clicking Option of the menu _bar on the main File Option Print Help screen and then clicking IC free contact of the sub menu will display the screen for the free _ contact of indoor unit ki Automatic searching Stop mai communication C tree contact NOTE IC free contact can be chosen only when oe G 50 is Ver 2 60 or more Address i In the case when connected via G 50 the screen shown Meniti right will appear once Please wait for a while Ind amp or Unit address is under search Now the necessary information is under collecting from G 50 3 11 2 Monitoring of contact status 1 Manual monitoring To m
82. ting the Programs C Program Files MntTool32 MntTool32 exe Default folder of Maintenance Tool from the Browse screen click the Open button d Select MntTool32 from Programs on the Add a Program screen and click the OK button e Here MntTool82 has been registered to the Programs and Services on the Exceptions tab screen of Windows firewall Refer to 13 f Click the checking column of MntTool32 to affix a check mark 14 Click the OK button to close the Windows Firewall screen Now the manual setting of Firewall has completed The same status as that when Unblock of Windows Security Alert was selected will be presented Close all screens and start Maintenance Tool 63 Troubleshooting Trouble When Installing or Startin Trouble Cannot install Cannot start application The message of Can t Connect to G50 is displayed at on line starting The message of Maintenance Tool can t connect to old version G50 Use G 50 upper version2 40 is displayed at the on line starting The message M Net interface board not connected appears A message of Monitor data size is very large Please delete old monitor data is displayed at starting A message of Maintenance Tool can t connect to this G 50 Because this G 50 is not licensed is displayed at starting under the online mode A message of The term of validity of the installed version
83. ting up Press any key to continue is displayed Pressing any key closes the command prompt screen Notice During database setting the process may be observed as stopped for a while However it is still under operation internally Wait for some time until Press any key to continue appears without doing anything Do not stop the set up procedure by pressing at the upper right of the screen Step 3 Setting up the Maintenance Tools Set up the application of this Maintenance Tools Please read the guide shown on the screen carefully to proceed the setting up ober se F ld ln Ais THE aval GF Welcome bo the Hemrlhonainee tool fer 1 Starting the setup program Windows 2000 and XP Setup Wizard 1 Start setup exe Execute setup exe located in IUD rel F en you oaa lhe eter sell Guat pa Fgh ee ee eee bo retell Hers a ben See ii te ore SetUp 3 MNTTOOL folder of CD ROM Double clicking on setup exe with the explorer displays Welcome screen Please confirm the caution shown on the screen before setting up M Ep We E AAL A E a E 2 Confirm the display contents and select Next button Lasiana dates a debra al iar progres or aer aaa of k mag mend ja erae If no problem was found on the content click Next button To stop setting up click on Cancel button 2 Confirming the Installation folder ee 1 Confirm the installation folder and select Next
84. tron fir re Anii mit Ei 2 The mail connection setting screen is displayed cee Here set the mail information on G 50A to be connected ee and that on the Maintenance Tool Hane i Mail Address aio geiir cop nn a SSS S 2 Notice i 2 For each mail address it is required to obtain and set an exclusive one To transmit mail via an internet provider obtain the mail address from the provider When a mail server is existing on the LAN obtain the mail address from the LAN administrator a Setting of the mail information on G 50A 1 To assign the G 50A connected in the past After assigning Customer name from the pull down menu select G 50 name 2 To connect to new G 50A Click to open the address book and register and select the mail address of G 50A The 10 Customer names in the past are displayed on the pull down menu To assign earlier G 50A open the address book to select 15 b Address book The mail address of G 50A for each project can be registered As shown in the sample examples register the name and mail address of G 50A after preparing the Customer name folder Entering order 1 Preparing the Customer folder SS i Pressing displays the input screen of customer name paeronia and then enter the name The setting can also be made from the file menu or the sub menu displayed by right clicking CELGCCCOLE Z Further deletion processing can be mad
85. ts 3 After the units to be monitored have been selected click on Defined 4 The message Monitoring Please wait for a moment will appear After a while the screen to select monitor method appears When it is judged that monitoring with one minute cycle may not be performed because of many units to be monitored a message of The monitoring cycle will be seconds due to too many IC units for monitoring will be displayed automatically To continue the monitoring click YES while to suspend it once to reduce the quantity of units for monitoring click NO Reduction of one IC can minimize the cycle time by about one second Moi 8 a ee h E E EFA rii km il W mob eee phem eee OS eee eddies Fe oiler In MN converter connection it shifts to 7 5 When desiring to observe the operation data immediately select Realtime Monitor Mode and then click on L Select Mail communication Mode to observe the operation data by the off line monitor later after mail transmitting the operation data beforehand by using the mail transmission function 29 When Mail communication Mode is selected the setting items of mail communication will be displayed P an From Mail Address Ta Sa Set the mail address of the G 50A in the From Mail MIT a i Address field When sending mail via an ISP set the mail ya address allocated by the ISP When the mail s
86. went out is displayed at starting Maintenance tool does not start Cause Install CD ROM not properly positioned Insufficient memory OS is not an English version The IP address of G 50A or PC is incorrect LAN cable is not connected The S W version of G 50A is older than Ver2 40 RS 232C cable and MN converter are not connected A straight type RS 232C cable is being used The memory capacity to store data is insufficient The license registration has not been done for G 50 Repair Properly position Install CD ROM End other applications Regional options setup changing into English area form Or after changing date separator into time separator into and a decimal point mark is changed into it tries Refer to 1 2 1 1 Input the correct address Cree TE G 50A HUB PC The maintenance tools can not be connected to the older version of G 50A than Ver2 40 Use the new version G 50A Recommended Ver2 50 or more To use the E mail connection mode the version of G 50 should be above 2 60 A cross type RS 232C cable is being used Make sure MN converter and PC are properly connected Refer to Operator s Manual for the MN converter Connect the MN converter and the air conditioning unit to the M Net transmission line Refer to the Operator s Manual for the MN Converter Move to Offline Screen and delete unnecessary data Purchase the license No and register the
87. y set with Maintenance Tool and the mail address by the G 50A initial setting tool For each mail address it is required to obtain and set an exclusive one To transmit mail via an internet provider obtain the mail address from the provider When a mail server is existing on the LAN obtain the mail address from the LAN administrator Set the Pop receive interval within 3 minutes However to monitor operating status Operation Monitor set it within 1 minute Setting of initial information to G 50A can not be executed from Maintenance Tool Make sure to set it from the G 50A initial setting tool locally If dialup connection environment is available it can be set from a remote position For detail please refer to 6 1 Mail Basic Setting in the instruction manual of the G 50A initial setting tool eT he communication speed under E mail connection mode largely depends on the transfer rate of each mail server Under the circumstance the action of Maintenance Tool may take a lot of time under some internet environments or routing mail servers eFor the system composition please refer to the system diagram of 2 2 in 1 1 2 1 After clicking G 50 Network on the selection screen of Please Siabiect Morahan sncete Monitor mode and click REMOTE CONNECTION E mail ere Last click Set gt r com H T toad Parte P p ai LA P Renie Sonesta Chea E anche Correction E O Pushes So ee ma Dire Ci

Mitsubishi G-50A Air Conditioner User Manual

Contents

Download Pdf Manuals

Related Search

Related Contents