Home

Mercedes-Benz 2000 C-Class Automobile User Manual

image

Contents

1. tures will increase operating time May be normal Check for free fan blade rotation Clean condenser Contact authorized service center Contact authorized service center Contact authorized service center Check gasket fit Check door for obstructions Contact authorized service center Check for cause see above Replace light bulb see page 15 Check door switch Check rocker switch Contact authorized service center Contact authorized service center Check door or door gasket SERVICE CENTER Contact your Sub Zero dealer or check the Locator section of our website subzero com for the authorized service center nearest you 17 CONTACT INFORMATION Sub Zero Customer Service 800 222 7820 Website subzero com 18 SERVICE INFORMATION SERVICE INFORMATION If you do need service be sure to have the model and serial number of your unit when you call You ll find these numbers on the model and serial number plate located on the underside of the top wall For warranty purposes you will also need the date of installation and the name of your Sub Zero dealer Record this information below for future reference Model Number Serial Number Installation Date Sub Zero Authorized Service Center and Phone Sub Zero Dealer and Phone BEFORE CALLING FOR SERVICE Before calling a Sub Zero authorized service center refer to the Troubleshooting Guide on page 17 Check the household fuse or cir
2. bottle capacity u Overlay and stainless steel design options Ideal humidity and temperature range of m 45 F 7 C to 55 F 13 C a Sturdy rustproof wire shelves accommo date standard 750 ml bottles half bottles as well as magnums u Roller glide shelves faced with natural cherry wood have a three quarter extension for easy access MODEL 315W Wine cooler Serial Number Plate Wine Bottle Shelves Intake Vents Discharge Vents Light Switch Kickplate Temperature Control Full view glass door with UV resistant glass protection High altitude glass door Discreet low voltage interior lighting UL approved for US and Canada Two five and twelve year residential warranty exclusions apply see warranty at the end of this guide SUB ZERO MODEL 315W INSTALLATION INSTALLATION SPECIFICATIONS MODEL 315W DIMENSIONS Overall Width 15 1 8 384 Overall Height 341 16 865 Overall Depth 315W S 235 32 588 Overall Depth 315W O 223 s 568 Rough Opening Width 151 4 387 Rough Opening Height 341 2 876 Minimum Height Required levelers in 341 16 865 Rough Opening Depth 24 610 Dimensions may vary 1 8 3 OVERALL DIMENSIONS Stainless steel unit shown OVERALL DEPTH lt 235 32 588 MODEL 315W S gt 223 8 568 MODEL 315W O 341 16 865 OVERALL HEIGHT FRONT VIEW SIDE VIEW lt 151 8 384 gt OVER
3. may vary 1 8 3 1 a reveal is required if two units are placed side by side 7 16 11 reveal from top of door panel to top of hinge OVERLAY DOOR DIMENSIONS Overlay unit shown lt 143 4 375 gt 2915 16 760 FRONT VIEW Inspect the door panel for the minimum s 16 thickness the finished inside edge and the 10 Ibs 5 kg weight limit See the Wine Storage section of the Sub Zero Design Guide for additional panel information Check our website at subzero com Decide if the handle will be attached through the glass door frame or just through the deco rative door panel If it is just through the door panel the handle must be attached first If you choose not to use the pre drilled handle mounting holes it will be necessary to fasten the handle from the rear of the door panel only or drill one or more additional holes through the metal frame of the glass door A CAUTION A solid panel must not be installed on a glass door unit as this may cause moisture to form behind the panel Dimensions in parentheses are in millimeters unless otherwise specified SUB ZERO MODEL 315W INSTALLATION OVERLAY PANEL INSTALLATION A decorative panel is attached to the Model 315W door using 8 x 5 s 16 square drive screws passing through the door frame from the rear behind the gasket into the panel The door panel is marked for screw locations by the use of ten
4. will restrict air flow and cause a decrease in performance and efficiency Refer to the illustration below IMPORTANT NOTE The minimum air temperature the wine cooler will operate in is 50 F 10 C and the maximum is 100 F 38 C MOVING THE UNIT IMPORTANT NOTE When you move the unit using a hand truck or dolly position the dolly on the side of the unit and secure the door so it does not open while transporting IMPORTANT NOTE When moving and installing the Model 315W S be sure to protect all stainless steel surfaces from scratches Once the unit is in place remove any tape or other packaging material from the inside Check that all wine shelves fully extend A CAUTION Any finished flooring should be protected with appropriate material to avoid any damage from moving the unit LINE POWER VOLTAGE NEUTRAL GROUND ROOM AIR IN WARM AIR OUT Grounded electrical outlet Kickplate airflow SUB ZERO MODEL 315W INSTALLATION BLOCKING FOR SAFETY To prevent the unit from tipping forward if multiple loaded bottle racks are pulled out at one time and to provide a stable installation the unit must be secured in place with an anti tip device A metal antip tip bracket and screws are provided with the unit Attach the anti tip bracket to the top of the unit opposite the hinge side The bracket offset flange should be facing up with the t
5. 87 ROUGH OPENING WIDTH 34 1 2 876 ROUGH OPENING LOCATE HEIGHT ELECTRICAL 341 16 865 ANYWHERE ON MINIMUM BACK WALL LEVELERS IN E FRONT VIEW NOTE ROUGH OPENING DEPTH IS 24 610 Dimensions in parentheses are in 6 millimeters unless otherwise specified SUB ZERO MODEL 315W INSTALLATION ELECTRICAL REQUIREMENTS A 115 V AC 60 Hz 15 amp circuit breaker and electrical supply are required A separate circuit is required for each unit The Model 315W is equipped with a power supply cord with a 3 prong grounding plug which must be plugged into a mating 3 prong grounding type wall receptacle Refer to the illustration below Follow the National Electrical Code and local codes and ordinances when installing the receptacle For location of the electrical supply refer to the Rough Opening Dimensions illustration on page 6 IMPORTANT NOTE A ground fault circuit interrupter GFCI is not recommended and may cause interruption of operation A WARNING Do not use an extension cord or two prong adapter Electrical ground is required on this appliance Do not remove the power supply cord ground prong KICKPLATE AIRFLOW The wine cooler uses a fan to take in room air through vents in the left side of the kickplate and discharges warm air through vents in the right side These vents must be kept clear of obstructions or decorative panels Blocking or obstructing the kickplate
6. ALL WIDTH Dimensions may vary 1 s 3 NOTE Door swing not reversible Dimensions in parentheses are in millimeters unless otherwise specified lt 151 8 384 gt OVERALL WIDTH a 111 16 l 281 247 8 632 TO HANDLE MODEL 315W S TOP VIEW 171 4 438 DOOR SWING 90 DOOR OPENING SUB ZERO MODEL 315W INSTALLATION INSTALLATION SPECIFICATIONS AREA REQUIREMENTS A CAUTION Before moving the unit into place be sure that Wine bottles are heavy A fully loaded the rough opening dimensions electrical unit will weigh over 200 Ibs 91 kg Be location and minimum door clearances are sure the subflooring is adequate for the accurate Refer to the illustration below Also weight of both the unit and its contents Refer to page 5 for overall dimensions Be sure your electrician and cabinet installer AWARNING have this information before finishing work is Bar i The Model 315W is intended for indoor completed use only IMPORTANT NOTE Make sure the floor under the unit is level with the surrounding finished floor IMPORTANT NOTE For corner installations door swing may be limited due to handle contact with the adjacent wall or cabinet face You must allow a minimum of 2 51 from the wall for a 90 door opening This will ensure that the wine shelves can be fully extended ROUGH OPENING DIMENSIONS 151 4 3
7. MODEL 315W WINE COOLER INSTALLATION amp OPERATION SUB ZERO CONTENTS Model 315W Features Model 315W Installation Installation Checklist Model 315W Operation Troubleshooting Guide Service Information Sub Zero Warranty Features and specifications indicated herein and on the website are subject to change at any time without notice Check our website subzero com for the most up to date specifications SUB ZERO is a registered trademark of Sub Zero Freezer Company Inc 13 14 17 18 19 As you follow these instructions you will notice WARNING and CAUTION symbols This blocked information is important for the safe and efficient installation of Sub Zero equipment There are two types of potential hazards that may occur during installation A CAUTION signals a situation where minor injury or product damage may occur if you do not follow instructions A WARNING states a hazard that may cause serious injury or death if precautions are not followed Another footnote we would like to identify is IMPORTANT NOTE This highlights informa tion that is especially relevant to a problem free installation SUB ZERO MODEL 315W INSTALLATION AND OPERATION THANK YOU Congratulations on the purchase of your Sub Zero Model 315W wine cooler This unit is designed and manufactured in the Sub Zero tradition of superior quality and reliability The importance of the installation of the Model 315W wine cooler canno
8. an be found in the Sub Zero The cover patches or plugs are part of the Design Guide insulation system on the door of the wine Check our website cooler Be sure to cover all the holes in at subzero com the door that were used 12 SUB ZERO MODEL 315W INSTALLATION INSTALLATION CHECKLIST IMPORTANT NOTE To ensure a safe and proper installation the following checklist should be completed by the installer to ensure that no part of the installation has been overlooked Any questions or problems about the installa tion should be directed to your Sub Zero dealer or the Sub Zero Customer Service Department at 800 222 7820 You can also visit our website at subzero com Is the unit operating If not is the unit plugged in Check to see if the unit is operating before you install Has the unit been properly uncrated and have all packing materials and tape been removed from inside the product Have the installation instructions been followed Has the unit been leveled Is the kickplate installed If applicable is the door panel installed properly Does the customer understand the unit s operation Have any installation or service problems been noted on the product registration card Instruct the owner to register the product A WARNING If you are storing or disposing of your old refrigerator or freezer please do it safely Remove the doors or tightly secure the doors closed Child entrapment accidents can
9. ation your Sub Zero warranty covers all parts and labor to repair or replace any components that prove to be defective in materials or workmanship in the sealed system The sealed system consists of the compressor condenser evaporator drier and all connecting tubing FULL TWO YEAR WARRANTY For two years from the date of original installation your Sub Zero warranty covers all parts and labor to repair or replace any part of the product that proves to be defective in materials or work manship LIMITED SIXTH THROUGH TWELFTH YEAR SEALED SYSTEM WARRANTY From the 6th through the 12th year from the date of original installation your Sub Zero warranty covers all parts that prove to be defective in materials or workmanship in the sealed system parts only The sealed system consists of the compressor condenser evaporator drier and all connecting tubing TERMS APPLICABLE TO EACH WARRANTY All service provided by Sub Zero under the above warranty must be performed by an authorized Sub Zero service center unless otherwise specified by Sub Zero Service will be provided in the home during the normal business hours This warranty applies only to products installed for normal residential use Details regarding a non residential warranty are available upon request The warranty applies only to products installed in any one of the fifty states of the United States the District of Columbia or the ten provinces of Canada This warranty does not cov
10. be tragic CONTACT INFORMATION Sub Zero Customer Service 800 222 7820 Website subzero com 13 14 SUB ZERO MODEL 315W OPERATION USING YOUR WINE COOLER Your wine cooler is extremely simple to use just turn the control knob to the ON position The Model 315W will automatically begin to cool and will continue to do so until the set temperature is reached The Model 315W operates on this principal the unit will run to achieve the set temperature Run time will vary based upon the amount of usage room temperature and amount of wine added SETTING THE TEMPERATURE Rotate the temperature adjustment knob until the desired temperature is achieved Turn the knob clockwise to make the unit colder Refer to the illustration below Interior cabinet temperatures may be a slightly warmer at the top or front of unit and cooler at the bottom and back IMPORTANT NOTE The wine cooler will not cool down immediately upon initial start up Allow approximately 24 hours for unit to reach desired temperature When fully loaded with room temperature wine the Model 315W will operate continu ously for as long as 24 hours to reach the desired temperature After reaching the set temperature the unit will begin to cycle on and off IMPORTANT NOTE A unit fully loaded with wine will run less than a unit which is partially full LIGHT SWITCH The display light automatically switches on when the door is opened To have
11. cuit breaker to see if it has been blown or tripped and that the electrical connection to the appli ance has not been disconnected A power outage may also have caused a disruption in service PRODUCT REGISTRATION Register your new Sub Zero today so that we may ensure your satisfaction You may register by one of the following options 1 Mail in the completed Sub Zero Product Registration Card 2 Register online at subzero com 3 Register by phone by calling the Sub Zero Customer Service Department at 800 222 7820 The model and serial numbers of your unit are printed on the enclosed Sub Zero Product Registration Card Your registration informa tion will allow us to send you exciting new product updates and recipes as they become available along with information on special events The information and images in this guide are the copyright property of Sub Zero Freezer Company Inc Neither this book nor any information or images contained herein may be copied or used in whole or in part without the express written permission of Sub Zero Freezer Company Inc Sub Zero Freezer Company Inc all rights reserved SUB ZERO FREEZER COMPANY PRODUCTS LIMITED WARRANTY RESIDENTIAL USE ONLY FULL FIVE YEAR SEALED SYSTEM WARRANTY LIMITED SIXTH THROUGH TWELFTH YEAR WARRANTY ON THE SEALED SYSTEM FULL TWO YEAR WARRANTY ON TOTAL PRODUCT FULL FIVE YEAR SEALED SYSTEM WARRANTY For five years from the date of original install
12. d by the product warranty SUB ZERO 19 SUB ZERO FREEZER COMPANY INC P O BOX 44130 MADISON WI 53744 4130 800 222 7820 SUBZERO COM 17308001 8 2005
13. e note and apply with a soft 100 lint free cloth If anything spills onto the door gasket wash with soap and warm water to remove Rinse and dry thoroughly GLASS DOOR CLEANING The glass door panel can be cleaned using any standard glass cleaner available on the market today INTERIOR CLEANING To clean interior surfaces and removable parts wash with a mild solution of soap and luke warm water with a little baking soda Do not use vinegar Rinse and dry thoroughly Avoid getting water on lights control panel and the solid cherry wood facing on the shelves Do not use abrasive cleaners or cloths on any of the interior or exterior surfaces including the glass door panel Kickplate removal CLEANING THE CONDENSER A WARNING Before cleaning the condenser and other routine maintenance shut off power at the circuit breaker suppling power to the electrical outlet The air cooled condenser should be vacuumed two to three times per year to remove any lint that may have been drawn into the condenser To access the condenser use a phillips head screw driver to remove the kickplate as shown in the illustration below Then using a soft bristle brush vacuum to remove dust and lint from the condenser Refer to the illustration below IMPORTANT NOTE To avoid bending the condenser fins be sur
14. e to vacuum in the direc tion of the fins up and down A CAUTION Failure to clean the condenser could result in temperature loss or mechanical failure or damage CONDENSER FINS Cleaning the condenser SUB ZERO TROUBLESHOOTING GUIDE TROUBLESHOOTING GUIDE PROBLEM Cabinet too warm Cabinet temperature changed Excessive operating time Excessive noise Unit will not cool Thick frost on evaporator Cabinet light does not work properly Water running inside unit Water leaking under unit POSSIBLE CAUSE Unit switched off Temperature control setting changed Dirty condenser Cabinet full of warm wine Door gasket not sealing tightly Thick frost on evaporator see below Unit in warm room conditions Fan will make some noise Fan blade contacting fan shroud Dirty condenser Fan motor not turning blade Low on refrigerant Compressor not operating Door gasket not sealing tightly Door not closing Thermostat not keeping unit off long enough Excessive operating time Light bulb burned out Door switch does not close Cannot switch light on with door closed Drain trough hose plugged Drain hose out of position Drain pan over filling POSSIBLE SOLUTION Check temperature control Check temperature setting Clean condenser Unit must operate for up to 24 hours to cool warm wine Check gasket fit Shut unit off until frost melts see below Sunlight or high room tempera
15. edure to reinstall the shelf IMPORTANT NOTE Wine shelf removal will be more difficult if the door cannot open to a minimum of 120 as in a corner application LIGHT BULB REPLACEMENT The light bulb located in the top of the cabinet will last for a long time however when it does fail or burn out it can be replaced Replace ment bulbs part 12288801 are available from your Sub Zero authorized service center To replace the light bulb unplug the unit Remove the top wine shelf Pull the plug from the socket in the top of the unit as shown in the illustration below Remove the bulb from its holder and install the new bulb A WARNING Shut off power to the unit before replac ing light bulbs Wear protective gloves when handling bulbs ME rr LIGHT BULB SOCKET Wine shelves Light bulb replacement DESIGN GUIDE Details on how to replace the wine shelves cherry wood facing can be found in the Sub Zero Design Guide Check our website at subzero com 15 SIGNATURE POLISH Signature Polish is available from Signature Limited Laboratory P O Box 13436 Dayton Ohio 45413 0436 or call 877 376 5474 toll free 16 SUB ZERO MODEL 3I15W OPERATION CLEANING EXTERIOR CLEANING To clean the classic stainless steel exterior of the Model 315W S use a soft nonabrasive stainless steel cleaner like Signature Polish see sid
16. er any parts or labor to correct any defect caused by negligence accident or improper use maintenance installation service or repair including but not limited to improper removal and reinstallation whether in the unit or at a remote location of the condensing unit THE REMEDIES DESCRIBED ABOVE FOR EACH WARRANTY ARE THE ONLY ONES THAT SUB ZERO WILL PROVIDE EITHER UNDER THESE WARRANTIES OR UNDER ANY WARRANTY ARISING BY OPERATION OF LAW SUB ZERO WILL NOT BE RESPONSIBLE FOR ANY CONSE QUENTIAL OR INCIDENTAL DAMAGES ARISING FROM THE BREACH OF THESE WARRANTIES OR ANY OTHER WARRANTIES WHETHER EXPRESS IMPLIED OR STATUTORY Some states do not allow the exclusion or limitation of incidental or consequential damages so the above limitation or exclusion may not apply to you This warranty gives you specific legal rights and you may also have other legal rights which vary from state to state To receive parts and or service and the name of the Sub Zero authorized service center nearest you contact your Sub Zero dealer distributor or Sub Zero Freezer Company Customer Service Depart ment P O Box 44130 Madison Wisconsin 53744 4130 check the Locator section of our website subzero com or call 800 222 7820 Stainless Steel classic platinum and carbon doors panels product frames and stainless interior surfaces are covered by a limited 60 day parts and labor warranty for cosmetic defects Replacement water filter cartridges are not covere
17. l design alternatives stainless steel S or overlay O Both of these design options are available with glass G doors Model 315W S classic stainless steel is shipped from the factory with the decorative stainless steel door panel and matching handle in place The Model 315W O overlay door is designed to accept a decorative door panel to match surrounding cabinetry The door panel and the handle will be provided by the customer For overlay panel handle hardware we recom mend a D style handle centered top to bottom along the edge opposite the hinge You may have to countersink screw heads to ensure hardware does not interfere with panels fitting flush with unit doors Before beginning installation check for the correct components for the fit and finish desired If you have questions contact your Sub Zero dealer or cabinet supplier Additional panel information can be found in the Sub Zero Design Guide Check our website at subzero com PANEL DESIGN Additional panel design information can be found in the Sub Zero Design Guide Check our website at subzero com 10 SUB ZERO MODEL 315W INSTALLATION OVERLAY PANELS OVERLAY PANEL SPECIFICATIONS Door Panel Width 1 s 3 reveal 15 381 Door Panel Height 7 16 11 reveal 4 102 toe space 301 16 764 Width of Rails and Stiles 21 4 57 min 5 8 16 min 10 Ibs 4 5 kg max Door Panel Thickness Door Panel Weight Dimensions
18. on centers which are temporar ily inserted into the 1 4 6 diameter holes in the front of the glass door frame Refer to the illustration below With the unit secured in position and the door closed the panel is held in the desired position on the door and rapped by hand from the front putting center marks on the rear surface of the panel If the door panel is made of such a material that pre drilling is needed all of the mounting holes should be marked If not only enough holes to hold the panel in place temporarily are necessary The door panel is then removed from the door frame tenon centers removed the door opened and the screws driven into the panel through the black tape on the door frame using the center marks to locate the screws The screw holes inside the door are hidden under a cover flap on the door gasket It is necessary to lift the flap to insert the screws Use as many screws as necessary to hold door panel in place properly IMPORTANT NOTE After the first three or four mounting screws are in place but not completely tightened close the door and check your panel fit This is the time to make small adjustments Once you are satisfied with the appearance open the door and apply the remainder of the screws Check all screws for tightness The metal frame on the glass door has numerous mounting holes on each side of the door This is to accommodate the Sub Zero accessory handles and provide for eas
19. t be overemphasized Installation should be done by a qualified installer Before you begin the installation process it is recommended that you read the entire installation instructions There are key details that you should take special care to observe during the installation By reading these instructions carefully you will make the installation process easier problem free and most importantly safe Any questions or problems about the installation should be directed to your Sub Zero dealer or the Sub Zero Customer Service Department at 800 222 7820 You can also visit our website at subzero com The Model 315W wine cooler is protected by a warranty that is one of the finest in the industry Take a moment to read the warranty statement on page 19 and refer to it should service become necessary The Operation information in this book will answer most of your questions about the features operation and maintenance of your wine cooler If you have questions that are not addressed here call Sub Zero Customer Service at 800 222 7820 or visit our website subzero com CONTACT INFORMATION Sub Zero Customer Service 800 222 7820 Website subzero com WARRANTY Sub Zero products are covered by a two five and twelve year resi dential warranty exclusions apply See warranty details at the end of this guide SUB ZERO MODEL 315W FEATURES MODEL 315W FEATURES u Undercounter wine cooler with 26 m 750 ml
20. the light on when the door is closed move the light switch to the ON position Refer to the illustration below TEMPERATURE LIGHT SWITCH CONTROL KNOB a ATE ne Temperature control and light switch SUB ZERO MODEL 315W OPERATION WINE SHELVES Model 315W has roller assembly shelves with a full three quarter extension for easy access to wine bottles Each wine shelf holds four 750 ml bottles An additional two 750 ml bottles may be placed on the bottom station ary shelf for a total capacity of 26 bottles Refer to the illustration below IMPORTANT NOTE Never keep anything other than wine bottles on the wine shelves smaller beverage bottles are unstable and may easily fall out and break The shelves have a solid natural cherry wood facing that can be replaced with other wood to match your cabinetry Details on how to replace the shelves wood facing can be found in the Sub Zero Design Guide Check our website at subzero com IMPORTANT NOTE If you choose to stain or seal the shelves natural cherry wood facing be aware that some of these substances are hazardous and will damage wine A CAUTION Be sure to unload all bottles from the wine shelf before removing it WINE SHELF REMOVAL To remove a wine shelf pull the shelf out to its full extension gently and evenly lift up on both sides of the front of the shelf and remove Reverse the proc
21. theses are in millimeters unless otherwise specified Adjusting leveling legs SUB ZERO MODEL 315W INSTALLATION KICKPLATE INSTALLATION Once the Model 315W is in place you can install the kickplate There is some adjustment to the mounting assembly so that the kickplate will fit flush with the surrounding area Be sure that nothing obstructs the vents of the kick plate Refer to the illustration below The kickplate can be painted another color if you choose Follow these easy steps a Rough up surface to be painted with fine grit sandpaper u Wipe with alcohol to ensure it is clean and dry u Use an appliance or industrial grade oil base or high gloss enamel paint 4 CAUTION DO NOT cover the kickplate area IMPORTANT NOTE The Model 315W has been designed to be serviced in place but in some Cases it may be necessary to pull the unit out for service For this reason do not restrict access to the cabinet at the front top and bottom If a floor is to be installed after the unit has been installed spacing shims equal to the thickness of the floor should be installed under the unit to keep it level with the floor Kickplate installation PANEL CONSIDERATIONS The Model 315W offers two door pane
22. wo oblong holes also in the front Once the unit is moved into position open the door and secure the anti tip bracket to the countertop Refer to illustration below LEVELING THE UNIT A WARNING Shut off the power to the electrical outlet IMPORTANT NOTE The unit must be leveled prior to placing it in the rough opening There are four leveling legs on the Model 315W one at each corner To assist you in adjusting the front leveling legs up or down tip the unit back slightly to allow access to leveling legs Use a pliers and place around the leveling leg or use a screwdriver and turn the front leg to make necessary adjustments To level the unit turn the leveling legs counter clockwise to raise the unit or clockwise to lower it Refer to the illustration below To assist you in proper leveling we recom mend using a 2 6 m level There are two recommended level locations along the top of the unit or on either exterior side of the unit These positions will help determine the vertical and horizontal level point In order to access these leveling positions the unit will have to be slightly out of the opening Place the unit in the rough opening Make sure the power cord is plugged in before position ing the unit Turn the power back on to the electrical outlet Anti tip bracket Dimensions in paren
23. y attach ment of the handle through the door frame The illustration below shows how the holes pass through the door frame The hole center is on the small locator groove in the front of the frame A 1 4 6 diameter hole is made in the front wall of the extrusion and a 13 32 11 diameter hole through the rest of the frame A CAUTION Exercise caution when drilling holes for mounting the panel to the door frame 13 32 11 Diameter Tenon Center Diameter Overlay door panel Door frame cross section 11 SUB ZERO MODEL 315W INSTALLATION OVERLAY PANEL INSTALLATION IMPORTANT NOTE Install screws in all the A CAUTION mounting holes in the door frame The nature of the door panel with a narrow outer rim and a coka is ablesmallitontnercdlaiass core no connecting center member requires the The drill must not contact this core when support provided by the glass door drilling Be sure the hole is centered on the small groove in the front of the door frame and the drill passes squarely through the frame If you are inexperi enced with drilling fasten the handle from the rear of the door panel only The wine cooler door is made with PANEL DESIGN After the door panel installation is complete apply the cover patches or plugs provided over the holes on the inside surface of the door Additional panel design information A CAUTION c

Download Pdf Manuals

image

Related Search

Related Contents

2. - Vivitek  パルス合成器 - 大崎電気工業  Tutoriel de prise en main d`Ecampus Montaigne pour la FAD  My Aged Care Provider Portal User Guide  SOMMAIRE  Manuel d`utilisation HELIO-STROB micro2  07. システム設定 (p.259~310)  The Odyn™  MicroLogix 1400 Programmable Controllers  Samsung WW90J5210GW/AH Kullanıcı Klavuzu  

Copyright © All rights reserved.
DMCA: DMCA_mwitty#outlook.com.